linux/scripts/kconfig/conf.c

728 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
*/
#include <ctype.h>
#include <limits.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#include <getopt.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <errno.h>
#include "lkc.h"
static void conf(struct menu *menu);
static void check_conf(struct menu *menu);
enum input_mode {
oldaskconfig,
syncconfig,
oldconfig,
allnoconfig,
allyesconfig,
allmodconfig,
alldefconfig,
randconfig,
defconfig,
savedefconfig,
listnewconfig,
helpnewconfig,
olddefconfig,
yes2modconfig,
mod2yesconfig,
};
static enum input_mode input_mode = oldaskconfig;
static int indent = 1;
static int tty_stdio;
static int sync_kconfig;
static int conf_cnt;
static char line[PATH_MAX];
static struct menu *rootEntry;
static void print_help(struct menu *menu)
{
struct gstr help = str_new();
menu_get_ext_help(menu, &help);
printf("\n%s\n", str_get(&help));
str_free(&help);
}
static void strip(char *str)
{
char *p = str;
int l;
while ((isspace(*p)))
p++;
l = strlen(p);
if (p != str)
memmove(str, p, l + 1);
if (!l)
return;
p = str + l - 1;
while ((isspace(*p)))
*p-- = 0;
}
/* Helper function to facilitate fgets() by Jean Sacren. */
static void xfgets(char *str, int size, FILE *in)
{
if (!fgets(str, size, in))
fprintf(stderr, "\nError in reading or end of file.\n");
if (!tty_stdio)
printf("%s", str);
}
static int conf_askvalue(struct symbol *sym, const char *def)
{
enum symbol_type type = sym_get_type(sym);
if (!sym_has_value(sym))
printf("(NEW) ");
line[0] = '\n';
line[1] = 0;
if (!sym_is_changeable(sym)) {
printf("%s\n", def);
line[0] = '\n';
line[1] = 0;
return 0;
}
switch (input_mode) {
case oldconfig:
case syncconfig:
if (sym_has_value(sym)) {
printf("%s\n", def);
return 0;
}
/* fall through */
case oldaskconfig:
fflush(stdout);
xfgets(line, sizeof(line), stdin);
return 1;
default:
break;
}
switch (type) {
case S_INT:
case S_HEX:
case S_STRING:
printf("%s\n", def);
return 1;
default:
;
}
printf("%s", line);
return 1;
}
static int conf_string(struct menu *menu)
{
struct symbol *sym = menu->sym;
const char *def;
while (1) {
printf("%*s%s ", indent - 1, "", menu->prompt->text);
printf("(%s) ", sym->name);
def = sym_get_string_value(sym);
if (sym_get_string_value(sym))
printf("[%s] ", def);
if (!conf_askvalue(sym, def))
return 0;
switch (line[0]) {
case '\n':
break;
case '?':
/* print help */
if (line[1] == '\n') {
print_help(menu);
def = NULL;
break;
}
/* fall through */
default:
line[strlen(line)-1] = 0;
def = line;
}
if (def && sym_set_string_value(sym, def))
return 0;
}
}
static int conf_sym(struct menu *menu)
{
struct symbol *sym = menu->sym;
tristate oldval, newval;
while (1) {
printf("%*s%s ", indent - 1, "", menu->prompt->text);
if (sym->name)
printf("(%s) ", sym->name);
putchar('[');
oldval = sym_get_tristate_value(sym);
switch (oldval) {
case no:
putchar('N');
break;
case mod:
putchar('M');
break;
case yes:
putchar('Y');
break;
}
if (oldval != no && sym_tristate_within_range(sym, no))
printf("/n");
if (oldval != mod && sym_tristate_within_range(sym, mod))
printf("/m");
if (oldval != yes && sym_tristate_within_range(sym, yes))
printf("/y");
printf("/?] ");
if (!conf_askvalue(sym, sym_get_string_value(sym)))
return 0;
strip(line);
switch (line[0]) {
case 'n':
case 'N':
newval = no;
if (!line[1] || !strcmp(&line[1], "o"))
break;
continue;
case 'm':
case 'M':
newval = mod;
if (!line[1])
break;
continue;
case 'y':
case 'Y':
newval = yes;
if (!line[1] || !strcmp(&line[1], "es"))
break;
continue;
case 0:
newval = oldval;
break;
case '?':
goto help;
default:
continue;
}
if (sym_set_tristate_value(sym, newval))
return 0;
help:
print_help(menu);
}
}
static int conf_choice(struct menu *menu)
{
struct symbol *sym, *def_sym;
struct menu *child;
bool is_new;
sym = menu->sym;
is_new = !sym_has_value(sym);
if (sym_is_changeable(sym)) {
conf_sym(menu);
sym_calc_value(sym);
switch (sym_get_tristate_value(sym)) {
case no:
return 1;
case mod:
return 0;
case yes:
break;
}
} else {
switch (sym_get_tristate_value(sym)) {
case no:
return 1;
case mod:
printf("%*s%s\n", indent - 1, "", menu_get_prompt(menu));
return 0;
case yes:
break;
}
}
while (1) {
int cnt, def;
printf("%*s%s\n", indent - 1, "", menu_get_prompt(menu));
def_sym = sym_get_choice_value(sym);
cnt = def = 0;
line[0] = 0;
for (child = menu->list; child; child = child->next) {
if (!menu_is_visible(child))
continue;
if (!child->sym) {
printf("%*c %s\n", indent, '*', menu_get_prompt(child));
continue;
}
cnt++;
if (child->sym == def_sym) {
def = cnt;
printf("%*c", indent, '>');
} else
printf("%*c", indent, ' ');
printf(" %d. %s", cnt, menu_get_prompt(child));
if (child->sym->name)
printf(" (%s)", child->sym->name);
if (!sym_has_value(child->sym))
printf(" (NEW)");
printf("\n");
}
printf("%*schoice", indent - 1, "");
if (cnt == 1) {
printf("[1]: 1\n");
goto conf_childs;
}
printf("[1-%d?]: ", cnt);
switch (input_mode) {
case oldconfig:
case syncconfig:
if (!is_new) {
cnt = def;
printf("%d\n", cnt);
break;
}
/* fall through */
case oldaskconfig:
fflush(stdout);
xfgets(line, sizeof(line), stdin);
strip(line);
if (line[0] == '?') {
print_help(menu);
continue;
}
if (!line[0])
cnt = def;
else if (isdigit(line[0]))
cnt = atoi(line);
else
continue;
break;
default:
break;
}
conf_childs:
for (child = menu->list; child; child = child->next) {
if (!child->sym || !menu_is_visible(child))
continue;
if (!--cnt)
break;
}
if (!child)
continue;
if (line[0] && line[strlen(line) - 1] == '?') {
print_help(child);
continue;
}
sym_set_choice_value(sym, child->sym);
for (child = child->list; child; child = child->next) {
indent += 2;
conf(child);
indent -= 2;
}
return 1;
}
}
static void conf(struct menu *menu)
{
struct symbol *sym;
struct property *prop;
struct menu *child;
if (!menu_is_visible(menu))
return;
sym = menu->sym;
prop = menu->prompt;
if (prop) {
const char *prompt;
switch (prop->type) {
case P_MENU:
kconfig: hide irrelevant sub-menus for oldconfig Historically, "make oldconfig" has changed its behavior several times, quieter or louder. (I attached the history below.) Currently, it is not as quiet as it should be. This commit addresses it. Test Case --------- ---------------------------(Kconfig)---------------------------- menu "menu" config FOO bool "foo" menu "sub menu" config BAR bool "bar" endmenu endmenu menu "sibling menu" config BAZ bool "baz" endmenu ---------------------------------------------------------------- ---------------------------(.config)---------------------------- CONFIG_BAR=y CONFIG_BAZ=y ---------------------------------------------------------------- With the Kconfig and .config above, "make silentoldconfig" and "make oldconfig" work differently, like follows: $ make silentoldconfig scripts/kconfig/conf --silentoldconfig Kconfig * * Restart config... * * * menu * foo (FOO) [N/y/?] (NEW) y # # configuration written to .config # $ make oldconfig scripts/kconfig/conf --oldconfig Kconfig * * Restart config... * * * menu * foo (FOO) [N/y/?] (NEW) y * * sub menu * bar (BAR) [Y/n/?] y # # configuration written to .config # Both hide "sibling node" since it is irrelevant. The difference is that silentoldconfig hides "sub menu" whereas oldconfig does not. The behavior of silentoldconfig is preferred since the "sub menu" does not contain any new symbol. The root cause is in conf(). There are three input modes that can call conf(); oldaskconfig, oldconfig, and silentoldconfig. Everytime conf() encounters a menu entry, it calls check_conf() to check if it contains new symbols. If no new symbol is found, the menu is just skipped. Currently, this happens only when input_mode == silentoldconfig. The oldaskconfig enters into the check_conf() loop as silentoldconfig, so oldaskconfig works likewise for the second loop or later, but it never happens for oldconfig. So, irrelevant sub-menus are shown for oldconfig. Change the test condition to "input_mode != oldaskconfig". This is false only for the first loop of oldaskconfig; it must ask the user all symbols, so no need to call check_conf(). History of oldconfig -------------------- [0] Originally, "make oldconfig" was as loud as "make config" (It showed the entire .config file) [1] Commit cd9140e1e73a ("kconfig: make oldconfig is now less chatty") made oldconfig quieter, but it was still less quieter than silentoldconfig. (oldconfig did not hide sub-menus) [2] Commit 204c96f60904 ("kconfig: fix silentoldconfig") changed the input_mode of oldconfig to "ask_silent" from "ask_new". So, oldconfig really became as quiet as silentoldconfig. (oldconfig hided irrelevant sub-menus) [3] Commit 4062f1a4c030 ("kconfig: use long options in conf") made oldconfig as loud as [0] due to misconversion. [4] Commit 14828349719a ("kconfig: fix make oldconfig") addressed the misconversion of [3], but it made oldconfig quieter only to the same level as [1], not [2]. This commit is restoring the behavior of [2]. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-02-28 00:15:24 +00:00
/*
* Except in oldaskconfig mode, we show only menus that
* contain new symbols.
*/
if (input_mode != oldaskconfig && rootEntry != menu) {
check_conf(menu);
return;
}
/* fall through */
case P_COMMENT:
prompt = menu_get_prompt(menu);
if (prompt)
printf("%*c\n%*c %s\n%*c\n",
indent, '*',
indent, '*', prompt,
indent, '*');
default:
;
}
}
if (!sym)
goto conf_childs;
if (sym_is_choice(sym)) {
conf_choice(menu);
if (sym->curr.tri != mod)
return;
goto conf_childs;
}
switch (sym->type) {
case S_INT:
case S_HEX:
case S_STRING:
conf_string(menu);
break;
default:
conf_sym(menu);
break;
}
conf_childs:
if (sym)
indent += 2;
for (child = menu->list; child; child = child->next)
conf(child);
if (sym)
indent -= 2;
}
static void check_conf(struct menu *menu)
{
struct symbol *sym;
struct menu *child;
if (!menu_is_visible(menu))
return;
sym = menu->sym;
if (sym && !sym_has_value(sym)) {
if (sym_is_changeable(sym) ||
(sym_is_choice(sym) && sym_get_tristate_value(sym) == yes)) {
if (input_mode == listnewconfig) {
kconfig: extend output of 'listnewconfig' We at Red Hat/Fedora have generally tried to have a per file breakdown of every config option we set. This makes it easy for us to add new options when they are exposed and keep a changelog of why they were set. A Fedora example is here: https://src.fedoraproject.org/cgit/rpms/kernel.git/tree/configs/fedora/generic Using various merge scripts, we build up a config file and run it through 'make listnewconfig' and 'make oldnoconfig'. The idea is to print out new config options that haven't been manually set and use the default until a patch is posted to set it properly. To speed things up, it would be nice to make it easier to generate a patch to post the default setting. The output of 'make listnewconfig' has two issues that limit us: - it doesn't provide the default value - it doesn't provide the new 'choice' options that get flagged in 'oldconfig' This patch extends 'listnewconfig' to address the above two issues. This allows us to run a script make listnewconfig | rhconfig-tool -o patches; git send-email patches/ The output of 'make listnewconfig': CONFIG_NET_EMATCH_IPT CONFIG_IPVLAN CONFIG_ICE CONFIG_NET_VENDOR_NI CONFIG_IEEE802154_MCR20A CONFIG_IR_IMON_DECODER CONFIG_IR_IMON_RAW The new output of 'make listnewconfig': CONFIG_KERNEL_XZ=n CONFIG_KERNEL_LZO=n CONFIG_NET_EMATCH_IPT=n CONFIG_IPVLAN=n CONFIG_ICE=n CONFIG_NET_VENDOR_NI=y CONFIG_IEEE802154_MCR20A=n CONFIG_IR_IMON_DECODER=n CONFIG_IR_IMON_RAW=n Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 19:15:37 +00:00
if (sym->name) {
const char *str;
if (sym->type == S_STRING) {
str = sym_get_string_value(sym);
str = sym_escape_string_value(str);
printf("%s%s=%s\n", CONFIG_, sym->name, str);
free((void *)str);
} else {
str = sym_get_string_value(sym);
printf("%s%s=%s\n", CONFIG_, sym->name, str);
}
}
} else if (input_mode == helpnewconfig) {
printf("-----\n");
print_help(menu);
printf("-----\n");
} else {
if (!conf_cnt++)
printf("*\n* Restart config...\n*\n");
rootEntry = menu_get_parent_menu(menu);
conf(rootEntry);
}
}
}
for (child = menu->list; child; child = child->next)
check_conf(child);
}
static struct option long_opts[] = {
{"oldaskconfig", no_argument, NULL, oldaskconfig},
{"oldconfig", no_argument, NULL, oldconfig},
{"syncconfig", no_argument, NULL, syncconfig},
{"defconfig", required_argument, NULL, defconfig},
{"savedefconfig", required_argument, NULL, savedefconfig},
{"allnoconfig", no_argument, NULL, allnoconfig},
{"allyesconfig", no_argument, NULL, allyesconfig},
{"allmodconfig", no_argument, NULL, allmodconfig},
{"alldefconfig", no_argument, NULL, alldefconfig},
{"randconfig", no_argument, NULL, randconfig},
{"listnewconfig", no_argument, NULL, listnewconfig},
{"helpnewconfig", no_argument, NULL, helpnewconfig},
{"olddefconfig", no_argument, NULL, olddefconfig},
{"yes2modconfig", no_argument, NULL, yes2modconfig},
{"mod2yesconfig", no_argument, NULL, mod2yesconfig},
{NULL, 0, NULL, 0}
};
static void conf_usage(const char *progname)
{
printf("Usage: %s [-s] [option] <kconfig-file>\n", progname);
printf("[option] is _one_ of the following:\n");
printf(" --listnewconfig List new options\n");
printf(" --helpnewconfig List new options and help text\n");
printf(" --oldaskconfig Start a new configuration using a line-oriented program\n");
printf(" --oldconfig Update a configuration using a provided .config as base\n");
printf(" --syncconfig Similar to oldconfig but generates configuration in\n"
" include/{generated/,config/}\n");
printf(" --olddefconfig Same as oldconfig but sets new symbols to their default value\n");
printf(" --defconfig <file> New config with default defined in <file>\n");
printf(" --savedefconfig <file> Save the minimal current configuration to <file>\n");
printf(" --allnoconfig New config where all options are answered with no\n");
printf(" --allyesconfig New config where all options are answered with yes\n");
printf(" --allmodconfig New config where all options are answered with mod\n");
printf(" --alldefconfig New config with all symbols set to default\n");
printf(" --randconfig New config with random answer to all options\n");
printf(" --yes2modconfig Change answers from yes to mod if possible\n");
printf(" --mod2yesconfig Change answers from mod to yes if possible\n");
}
int main(int ac, char **av)
{
const char *progname = av[0];
int opt;
const char *name, *defconfig_file = NULL /* gcc uninit */;
kconfig: make syncconfig update .config regardless of sym_change_count syncconfig updates the .config only when sym_change_count > 0, i.e. any change in config symbols has been detected. Not only symbols but also comments are contained in the .config file. If only comments are updated, they are not fed back to the .config, then the stale comments are left-over. Of course, this is just a matter of comments, but why not fix it. I see some scenarios where this happens. Scenario A: 1. You have a source tree that has already been configured. 2. Linus increments the version number in the top-level Makefile (i.e. he commits a new release) 3. You pull it, and run 'make' 4. syncconfig is invoked because the environment variable, KERNELVERSION is updated, but the .config is not updated since no config symbol is changed. 5. The .config file contains a kernel version in the top line: # Automatically generated file; DO NOT EDIT. # Linux/arm64 4.18.0-rc2 Kernel Configuration ... which points to a previous version. Scenario B: 1. You have a source tree that has already been configured. 2. You upgrade the compiler, but it still has the same version number. This may happen if you regularly build the latest compiler from the source code. 3. You run 'make' 4. syncconfig is invoked because the environment variable, CC_VERSION_TEXT is updated, but the .config is not updated since no config symbol is changed. 5. The .config file contains the version string of the compiler: # # Compiler: aarch64-linux-gcc (GCC) 9.0.0 20180628 (experimental) # ... which carries the information of the old compiler. If KCONFIG_NOSILENTUPDATE is set, syncconfig is not allowed to update the .config file. Otherwise, it is fine to update it regardless of sym_change_count. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-20 07:46:30 +00:00
int no_conf_write = 0;
tty_stdio = isatty(0) && isatty(1);
while ((opt = getopt_long(ac, av, "s", long_opts, NULL)) != -1) {
if (opt == 's') {
conf_set_message_callback(NULL);
continue;
}
input_mode = (enum input_mode)opt;
switch (opt) {
case syncconfig:
/*
* syncconfig is invoked during the build stage.
* Suppress distracting "configuration written to ..."
*/
conf_set_message_callback(NULL);
sync_kconfig = 1;
break;
case defconfig:
case savedefconfig:
defconfig_file = optarg;
break;
case randconfig:
{
struct timeval now;
unsigned int seed;
char *seed_env;
/*
* Use microseconds derived seed,
* compensate for systems where it may be zero
*/
gettimeofday(&now, NULL);
seed = (unsigned int)((now.tv_sec + 1) * (now.tv_usec + 1));
seed_env = getenv("KCONFIG_SEED");
if( seed_env && *seed_env ) {
char *endp;
int tmp = (int)strtol(seed_env, &endp, 0);
if (*endp == '\0') {
seed = tmp;
}
}
fprintf( stderr, "KCONFIG_SEED=0x%X\n", seed );
srand(seed);
break;
}
case oldaskconfig:
case oldconfig:
case allnoconfig:
case allyesconfig:
case allmodconfig:
case alldefconfig:
case listnewconfig:
case helpnewconfig:
case olddefconfig:
case yes2modconfig:
case mod2yesconfig:
break;
case '?':
conf_usage(progname);
exit(1);
break;
}
}
if (ac == optind) {
fprintf(stderr, "%s: Kconfig file missing\n", av[0]);
conf_usage(progname);
exit(1);
}
name = av[optind];
conf_parse(name);
//zconfdump(stdout);
switch (input_mode) {
case defconfig:
if (conf_read(defconfig_file)) {
fprintf(stderr,
"***\n"
"*** Can't find default configuration \"%s\"!\n"
"***\n",
defconfig_file);
exit(1);
}
break;
case savedefconfig:
case syncconfig:
case oldaskconfig:
case oldconfig:
case listnewconfig:
case helpnewconfig:
case olddefconfig:
case yes2modconfig:
case mod2yesconfig:
conf_read(NULL);
break;
case allnoconfig:
case allyesconfig:
case allmodconfig:
case alldefconfig:
case randconfig:
name = getenv("KCONFIG_ALLCONFIG");
if (!name)
break;
if ((strcmp(name, "") != 0) && (strcmp(name, "1") != 0)) {
if (conf_read_simple(name, S_DEF_USER)) {
fprintf(stderr,
"*** Can't read seed configuration \"%s\"!\n",
name);
exit(1);
}
break;
}
switch (input_mode) {
case allnoconfig: name = "allno.config"; break;
case allyesconfig: name = "allyes.config"; break;
case allmodconfig: name = "allmod.config"; break;
case alldefconfig: name = "alldef.config"; break;
case randconfig: name = "allrandom.config"; break;
default: break;
}
if (conf_read_simple(name, S_DEF_USER) &&
conf_read_simple("all.config", S_DEF_USER)) {
fprintf(stderr,
"*** KCONFIG_ALLCONFIG set, but no \"%s\" or \"all.config\" file found\n",
name);
exit(1);
}
break;
default:
break;
}
if (sync_kconfig) {
kconfig: make syncconfig update .config regardless of sym_change_count syncconfig updates the .config only when sym_change_count > 0, i.e. any change in config symbols has been detected. Not only symbols but also comments are contained in the .config file. If only comments are updated, they are not fed back to the .config, then the stale comments are left-over. Of course, this is just a matter of comments, but why not fix it. I see some scenarios where this happens. Scenario A: 1. You have a source tree that has already been configured. 2. Linus increments the version number in the top-level Makefile (i.e. he commits a new release) 3. You pull it, and run 'make' 4. syncconfig is invoked because the environment variable, KERNELVERSION is updated, but the .config is not updated since no config symbol is changed. 5. The .config file contains a kernel version in the top line: # Automatically generated file; DO NOT EDIT. # Linux/arm64 4.18.0-rc2 Kernel Configuration ... which points to a previous version. Scenario B: 1. You have a source tree that has already been configured. 2. You upgrade the compiler, but it still has the same version number. This may happen if you regularly build the latest compiler from the source code. 3. You run 'make' 4. syncconfig is invoked because the environment variable, CC_VERSION_TEXT is updated, but the .config is not updated since no config symbol is changed. 5. The .config file contains the version string of the compiler: # # Compiler: aarch64-linux-gcc (GCC) 9.0.0 20180628 (experimental) # ... which carries the information of the old compiler. If KCONFIG_NOSILENTUPDATE is set, syncconfig is not allowed to update the .config file. Otherwise, it is fine to update it regardless of sym_change_count. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-20 07:46:30 +00:00
name = getenv("KCONFIG_NOSILENTUPDATE");
if (name && *name) {
if (conf_get_changed()) {
fprintf(stderr,
"\n*** The configuration requires explicit update.\n\n");
return 1;
}
kconfig: make syncconfig update .config regardless of sym_change_count syncconfig updates the .config only when sym_change_count > 0, i.e. any change in config symbols has been detected. Not only symbols but also comments are contained in the .config file. If only comments are updated, they are not fed back to the .config, then the stale comments are left-over. Of course, this is just a matter of comments, but why not fix it. I see some scenarios where this happens. Scenario A: 1. You have a source tree that has already been configured. 2. Linus increments the version number in the top-level Makefile (i.e. he commits a new release) 3. You pull it, and run 'make' 4. syncconfig is invoked because the environment variable, KERNELVERSION is updated, but the .config is not updated since no config symbol is changed. 5. The .config file contains a kernel version in the top line: # Automatically generated file; DO NOT EDIT. # Linux/arm64 4.18.0-rc2 Kernel Configuration ... which points to a previous version. Scenario B: 1. You have a source tree that has already been configured. 2. You upgrade the compiler, but it still has the same version number. This may happen if you regularly build the latest compiler from the source code. 3. You run 'make' 4. syncconfig is invoked because the environment variable, CC_VERSION_TEXT is updated, but the .config is not updated since no config symbol is changed. 5. The .config file contains the version string of the compiler: # # Compiler: aarch64-linux-gcc (GCC) 9.0.0 20180628 (experimental) # ... which carries the information of the old compiler. If KCONFIG_NOSILENTUPDATE is set, syncconfig is not allowed to update the .config file. Otherwise, it is fine to update it regardless of sym_change_count. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-20 07:46:30 +00:00
no_conf_write = 1;
}
}
switch (input_mode) {
case allnoconfig:
conf_set_all_new_symbols(def_no);
break;
case allyesconfig:
conf_set_all_new_symbols(def_yes);
break;
case allmodconfig:
conf_set_all_new_symbols(def_mod);
break;
case alldefconfig:
conf_set_all_new_symbols(def_default);
break;
case randconfig:
/* Really nothing to do in this loop */
while (conf_set_all_new_symbols(def_random)) ;
break;
case defconfig:
conf_set_all_new_symbols(def_default);
break;
case savedefconfig:
break;
case yes2modconfig:
conf_rewrite_mod_or_yes(def_y2m);
break;
case mod2yesconfig:
conf_rewrite_mod_or_yes(def_m2y);
break;
case oldaskconfig:
rootEntry = &rootmenu;
conf(&rootmenu);
kconfig: hide irrelevant sub-menus for oldconfig Historically, "make oldconfig" has changed its behavior several times, quieter or louder. (I attached the history below.) Currently, it is not as quiet as it should be. This commit addresses it. Test Case --------- ---------------------------(Kconfig)---------------------------- menu "menu" config FOO bool "foo" menu "sub menu" config BAR bool "bar" endmenu endmenu menu "sibling menu" config BAZ bool "baz" endmenu ---------------------------------------------------------------- ---------------------------(.config)---------------------------- CONFIG_BAR=y CONFIG_BAZ=y ---------------------------------------------------------------- With the Kconfig and .config above, "make silentoldconfig" and "make oldconfig" work differently, like follows: $ make silentoldconfig scripts/kconfig/conf --silentoldconfig Kconfig * * Restart config... * * * menu * foo (FOO) [N/y/?] (NEW) y # # configuration written to .config # $ make oldconfig scripts/kconfig/conf --oldconfig Kconfig * * Restart config... * * * menu * foo (FOO) [N/y/?] (NEW) y * * sub menu * bar (BAR) [Y/n/?] y # # configuration written to .config # Both hide "sibling node" since it is irrelevant. The difference is that silentoldconfig hides "sub menu" whereas oldconfig does not. The behavior of silentoldconfig is preferred since the "sub menu" does not contain any new symbol. The root cause is in conf(). There are three input modes that can call conf(); oldaskconfig, oldconfig, and silentoldconfig. Everytime conf() encounters a menu entry, it calls check_conf() to check if it contains new symbols. If no new symbol is found, the menu is just skipped. Currently, this happens only when input_mode == silentoldconfig. The oldaskconfig enters into the check_conf() loop as silentoldconfig, so oldaskconfig works likewise for the second loop or later, but it never happens for oldconfig. So, irrelevant sub-menus are shown for oldconfig. Change the test condition to "input_mode != oldaskconfig". This is false only for the first loop of oldaskconfig; it must ask the user all symbols, so no need to call check_conf(). History of oldconfig -------------------- [0] Originally, "make oldconfig" was as loud as "make config" (It showed the entire .config file) [1] Commit cd9140e1e73a ("kconfig: make oldconfig is now less chatty") made oldconfig quieter, but it was still less quieter than silentoldconfig. (oldconfig did not hide sub-menus) [2] Commit 204c96f60904 ("kconfig: fix silentoldconfig") changed the input_mode of oldconfig to "ask_silent" from "ask_new". So, oldconfig really became as quiet as silentoldconfig. (oldconfig hided irrelevant sub-menus) [3] Commit 4062f1a4c030 ("kconfig: use long options in conf") made oldconfig as loud as [0] due to misconversion. [4] Commit 14828349719a ("kconfig: fix make oldconfig") addressed the misconversion of [3], but it made oldconfig quieter only to the same level as [1], not [2]. This commit is restoring the behavior of [2]. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-02-28 00:15:24 +00:00
input_mode = oldconfig;
/* fall through */
case oldconfig:
case listnewconfig:
case helpnewconfig:
case syncconfig:
/* Update until a loop caused no more changes */
do {
conf_cnt = 0;
check_conf(&rootmenu);
} while (conf_cnt);
break;
case olddefconfig:
default:
break;
}
kconfig: allow all config targets to write auto.conf if missing Currently, only syncconfig creates or updates include/config/auto.conf and some other files. Other config targets create or update only the .config file. When you configure and build the kernel from a pristine source tree, any config target is followed by syncconfig in the build stage since include/config/auto.conf is missing. We are moving compiler tests from Makefile to Kconfig. It means that parsing Kconfig files will be more costly since Kconfig invokes the compiler commands internally. Thus, we want to avoid invoking Kconfig twice (one for *config to create the .config, and one for syncconfig to synchronize the auto.conf). If auto.conf does not exist, we can generate all configuration files in the first configuration stage, which will save the syncconfig in the build stage. Please note this should be done only when auto.conf is missing. If *config blindly did this, time stamp files under include/config/ would be unnecessarily touched, triggering unneeded rebuild of objects. I assume a scenario like this: 1. You have a source tree that has already been built with CONFIG_FOO disabled 2. Run "make menuconfig" to enable CONFIG_FOO 3. CONFIG_FOO turns out to be unnecessary. Run "make menuconfig" again to disable CONFIG_FOO 4. Run "make" In this case, include/config/foo.h should not be touched since there is no change in CONFIG_FOO. The sync process should be delayed until the user really attempts to build the kernel. This commit has another motivation; I want to suppress the 'No such file or directory' warning from the 'include' directive. The top-level Makefile includes auto.conf with '-include' directive, like this: ifeq ($(dot-config),1) -include include/config/auto.conf endif This looks strange because auto.conf is mandatory when dot-config is 1. I guess only the reason of using '-include' is to suppress the warning 'include/config/auto.conf: No such file or directory' when building from a clean tree. However, this has a side-effect; Make considers the files included by '-include' are optional. Hence, Make continues to build even if it fails to generate include/config/auto.conf. I will change this in the next commit, but the warning message is annoying. (At least, kbuild test robot reports it as a regression.) With this commit, Kconfig will generate all configuration files together with the .config and I guess it is a solution good enough to suppress the warning. Note: GNU Make 4.2 or later does not display the warning from the 'include' directive if include files are successfully generated. See GNU Make commit 87a5f98d248f ("[SV 102] Don't show unnecessary include file errors.") However, older GNU Make versions are still widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-20 07:46:31 +00:00
if (input_mode == savedefconfig) {
if (conf_write_defconfig(defconfig_file)) {
fprintf(stderr, "n*** Error while saving defconfig to: %s\n\n",
defconfig_file);
return 1;
}
} else if (input_mode != listnewconfig && input_mode != helpnewconfig) {
kconfig: allow all config targets to write auto.conf if missing Currently, only syncconfig creates or updates include/config/auto.conf and some other files. Other config targets create or update only the .config file. When you configure and build the kernel from a pristine source tree, any config target is followed by syncconfig in the build stage since include/config/auto.conf is missing. We are moving compiler tests from Makefile to Kconfig. It means that parsing Kconfig files will be more costly since Kconfig invokes the compiler commands internally. Thus, we want to avoid invoking Kconfig twice (one for *config to create the .config, and one for syncconfig to synchronize the auto.conf). If auto.conf does not exist, we can generate all configuration files in the first configuration stage, which will save the syncconfig in the build stage. Please note this should be done only when auto.conf is missing. If *config blindly did this, time stamp files under include/config/ would be unnecessarily touched, triggering unneeded rebuild of objects. I assume a scenario like this: 1. You have a source tree that has already been built with CONFIG_FOO disabled 2. Run "make menuconfig" to enable CONFIG_FOO 3. CONFIG_FOO turns out to be unnecessary. Run "make menuconfig" again to disable CONFIG_FOO 4. Run "make" In this case, include/config/foo.h should not be touched since there is no change in CONFIG_FOO. The sync process should be delayed until the user really attempts to build the kernel. This commit has another motivation; I want to suppress the 'No such file or directory' warning from the 'include' directive. The top-level Makefile includes auto.conf with '-include' directive, like this: ifeq ($(dot-config),1) -include include/config/auto.conf endif This looks strange because auto.conf is mandatory when dot-config is 1. I guess only the reason of using '-include' is to suppress the warning 'include/config/auto.conf: No such file or directory' when building from a clean tree. However, this has a side-effect; Make considers the files included by '-include' are optional. Hence, Make continues to build even if it fails to generate include/config/auto.conf. I will change this in the next commit, but the warning message is annoying. (At least, kbuild test robot reports it as a regression.) With this commit, Kconfig will generate all configuration files together with the .config and I guess it is a solution good enough to suppress the warning. Note: GNU Make 4.2 or later does not display the warning from the 'include' directive if include files are successfully generated. See GNU Make commit 87a5f98d248f ("[SV 102] Don't show unnecessary include file errors.") However, older GNU Make versions are still widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-20 07:46:31 +00:00
if (!no_conf_write && conf_write(NULL)) {
fprintf(stderr, "\n*** Error during writing of the configuration.\n\n");
exit(1);
}
kconfig: allow all config targets to write auto.conf if missing Currently, only syncconfig creates or updates include/config/auto.conf and some other files. Other config targets create or update only the .config file. When you configure and build the kernel from a pristine source tree, any config target is followed by syncconfig in the build stage since include/config/auto.conf is missing. We are moving compiler tests from Makefile to Kconfig. It means that parsing Kconfig files will be more costly since Kconfig invokes the compiler commands internally. Thus, we want to avoid invoking Kconfig twice (one for *config to create the .config, and one for syncconfig to synchronize the auto.conf). If auto.conf does not exist, we can generate all configuration files in the first configuration stage, which will save the syncconfig in the build stage. Please note this should be done only when auto.conf is missing. If *config blindly did this, time stamp files under include/config/ would be unnecessarily touched, triggering unneeded rebuild of objects. I assume a scenario like this: 1. You have a source tree that has already been built with CONFIG_FOO disabled 2. Run "make menuconfig" to enable CONFIG_FOO 3. CONFIG_FOO turns out to be unnecessary. Run "make menuconfig" again to disable CONFIG_FOO 4. Run "make" In this case, include/config/foo.h should not be touched since there is no change in CONFIG_FOO. The sync process should be delayed until the user really attempts to build the kernel. This commit has another motivation; I want to suppress the 'No such file or directory' warning from the 'include' directive. The top-level Makefile includes auto.conf with '-include' directive, like this: ifeq ($(dot-config),1) -include include/config/auto.conf endif This looks strange because auto.conf is mandatory when dot-config is 1. I guess only the reason of using '-include' is to suppress the warning 'include/config/auto.conf: No such file or directory' when building from a clean tree. However, this has a side-effect; Make considers the files included by '-include' are optional. Hence, Make continues to build even if it fails to generate include/config/auto.conf. I will change this in the next commit, but the warning message is annoying. (At least, kbuild test robot reports it as a regression.) With this commit, Kconfig will generate all configuration files together with the .config and I guess it is a solution good enough to suppress the warning. Note: GNU Make 4.2 or later does not display the warning from the 'include' directive if include files are successfully generated. See GNU Make commit 87a5f98d248f ("[SV 102] Don't show unnecessary include file errors.") However, older GNU Make versions are still widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-20 07:46:31 +00:00
/*
* Create auto.conf if it does not exist.
* This prevents GNU Make 4.1 or older from emitting
* "include/config/auto.conf: No such file or directory"
* in the top-level Makefile
*
* syncconfig always creates or updates auto.conf because it is
* used during the build.
*/
if (conf_write_autoconf(sync_kconfig) && sync_kconfig) {
fprintf(stderr,
"\n*** Error during sync of the configuration.\n\n");
return 1;
}
}
return 0;
}