linux/net/ipv4/tcp_minisocks.c

861 lines
27 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Implementation of the Transmission Control Protocol(TCP).
*
* Authors: Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Mark Evans, <evansmp@uhura.aston.ac.uk>
* Corey Minyard <wf-rch!minyard@relay.EU.net>
* Florian La Roche, <flla@stud.uni-sb.de>
* Charles Hedrick, <hedrick@klinzhai.rutgers.edu>
* Linus Torvalds, <torvalds@cs.helsinki.fi>
* Alan Cox, <gw4pts@gw4pts.ampr.org>
* Matthew Dillon, <dillon@apollo.west.oic.com>
* Arnt Gulbrandsen, <agulbra@nvg.unit.no>
* Jorge Cwik, <jorge@laser.satlink.net>
*/
#include <linux/mm.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/workqueue.h>
#include <linux/static_key.h>
#include <net/tcp.h>
#include <net/inet_common.h>
#include <net/xfrm.h>
#include <net/busy_poll.h>
static bool tcp_in_window(u32 seq, u32 end_seq, u32 s_win, u32 e_win)
{
if (seq == s_win)
return true;
if (after(end_seq, s_win) && before(seq, e_win))
return true;
return seq == e_win && seq == end_seq;
}
static enum tcp_tw_status
tcp_timewait_check_oow_rate_limit(struct inet_timewait_sock *tw,
const struct sk_buff *skb, int mib_idx)
{
struct tcp_timewait_sock *tcptw = tcp_twsk((struct sock *)tw);
if (!tcp_oow_rate_limited(twsk_net(tw), skb, mib_idx,
&tcptw->tw_last_oow_ack_time)) {
/* Send ACK. Note, we do not put the bucket,
* it will be released by caller.
*/
return TCP_TW_ACK;
}
/* We are rate-limiting, so just release the tw sock and drop skb. */
inet_twsk_put(tw);
return TCP_TW_SUCCESS;
}
/*
* * Main purpose of TIME-WAIT state is to close connection gracefully,
* when one of ends sits in LAST-ACK or CLOSING retransmitting FIN
* (and, probably, tail of data) and one or more our ACKs are lost.
* * What is TIME-WAIT timeout? It is associated with maximal packet
* lifetime in the internet, which results in wrong conclusion, that
* it is set to catch "old duplicate segments" wandering out of their path.
* It is not quite correct. This timeout is calculated so that it exceeds
* maximal retransmission timeout enough to allow to lose one (or more)
* segments sent by peer and our ACKs. This time may be calculated from RTO.
* * When TIME-WAIT socket receives RST, it means that another end
* finally closed and we are allowed to kill TIME-WAIT too.
* * Second purpose of TIME-WAIT is catching old duplicate segments.
* Well, certainly it is pure paranoia, but if we load TIME-WAIT
* with this semantics, we MUST NOT kill TIME-WAIT state with RSTs.
* * If we invented some more clever way to catch duplicates
* (f.e. based on PAWS), we could truncate TIME-WAIT to several RTOs.
*
* The algorithm below is based on FORMAL INTERPRETATION of RFCs.
* When you compare it to RFCs, please, read section SEGMENT ARRIVES
* from the very beginning.
*
* NOTE. With recycling (and later with fin-wait-2) TW bucket
* is _not_ stateless. It means, that strictly speaking we must
* spinlock it. I do not want! Well, probability of misbehaviour
* is ridiculously low and, seems, we could use some mb() tricks
* to avoid misread sequence numbers, states etc. --ANK
*
* We don't need to initialize tmp_out.sack_ok as we don't use the results
*/
enum tcp_tw_status
tcp_timewait_state_process(struct inet_timewait_sock *tw, struct sk_buff *skb,
const struct tcphdr *th)
{
struct tcp_options_received tmp_opt;
struct tcp_timewait_sock *tcptw = tcp_twsk((struct sock *)tw);
bool paws_reject = false;
tmp_opt.saw_tstamp = 0;
if (th->doff > (sizeof(*th) >> 2) && tcptw->tw_ts_recent_stamp) {
tcp_parse_options(twsk_net(tw), skb, &tmp_opt, 0, NULL);
if (tmp_opt.saw_tstamp) {
if (tmp_opt.rcv_tsecr)
tmp_opt.rcv_tsecr -= tcptw->tw_ts_offset;
tmp_opt.ts_recent = tcptw->tw_ts_recent;
tmp_opt.ts_recent_stamp = tcptw->tw_ts_recent_stamp;
paws_reject = tcp_paws_reject(&tmp_opt, th->rst);
}
}
if (tw->tw_substate == TCP_FIN_WAIT2) {
/* Just repeat all the checks of tcp_rcv_state_process() */
/* Out of window, send ACK */
if (paws_reject ||
!tcp_in_window(TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq,
tcptw->tw_rcv_nxt,
tcptw->tw_rcv_nxt + tcptw->tw_rcv_wnd))
return tcp_timewait_check_oow_rate_limit(
tw, skb, LINUX_MIB_TCPACKSKIPPEDFINWAIT2);
if (th->rst)
goto kill;
if (th->syn && !before(TCP_SKB_CB(skb)->seq, tcptw->tw_rcv_nxt))
return TCP_TW_RST;
/* Dup ACK? */
if (!th->ack ||
!after(TCP_SKB_CB(skb)->end_seq, tcptw->tw_rcv_nxt) ||
TCP_SKB_CB(skb)->end_seq == TCP_SKB_CB(skb)->seq) {
inet_twsk_put(tw);
return TCP_TW_SUCCESS;
}
/* New data or FIN. If new data arrive after half-duplex close,
* reset.
*/
if (!th->fin ||
TCP_SKB_CB(skb)->end_seq != tcptw->tw_rcv_nxt + 1)
return TCP_TW_RST;
/* FIN arrived, enter true time-wait state. */
tw->tw_substate = TCP_TIME_WAIT;
tcptw->tw_rcv_nxt = TCP_SKB_CB(skb)->end_seq;
if (tmp_opt.saw_tstamp) {
tcptw->tw_ts_recent_stamp = ktime_get_seconds();
tcptw->tw_ts_recent = tmp_opt.rcv_tsval;
}
inet_twsk_reschedule(tw, TCP_TIMEWAIT_LEN);
return TCP_TW_ACK;
}
/*
* Now real TIME-WAIT state.
*
* RFC 1122:
* "When a connection is [...] on TIME-WAIT state [...]
* [a TCP] MAY accept a new SYN from the remote TCP to
* reopen the connection directly, if it:
*
* (1) assigns its initial sequence number for the new
* connection to be larger than the largest sequence
* number it used on the previous connection incarnation,
* and
*
* (2) returns to TIME-WAIT state if the SYN turns out
* to be an old duplicate".
*/
if (!paws_reject &&
(TCP_SKB_CB(skb)->seq == tcptw->tw_rcv_nxt &&
(TCP_SKB_CB(skb)->seq == TCP_SKB_CB(skb)->end_seq || th->rst))) {
/* In window segment, it may be only reset or bare ack. */
if (th->rst) {
/* This is TIME_WAIT assassination, in two flavors.
* Oh well... nobody has a sufficient solution to this
* protocol bug yet.
*/
if (twsk_net(tw)->ipv4.sysctl_tcp_rfc1337 == 0) {
kill:
inet_twsk_deschedule_put(tw);
return TCP_TW_SUCCESS;
}
tcp: do not restart timewait timer on rst reception RFC 1337 says: ''Ignore RST segments in TIME-WAIT state. If the 2 minute MSL is enforced, this fix avoids all three hazards.'' So with net.ipv4.tcp_rfc1337=1, expected behaviour is to have TIME-WAIT sk expire rather than removing it instantly when a reset is received. However, Linux will also re-start the TIME-WAIT timer. This causes connect to fail when tying to re-use ports or very long delays (until syn retry interval exceeds MSL). packetdrill test case: // Demonstrate bogus rearming of TIME-WAIT timer in rfc1337 mode. `sysctl net.ipv4.tcp_rfc1337=1` 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < S 0:0(0) win 29200 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 // Receive first segment 0.310 < P. 1:1001(1000) ack 1 win 46 // Send one ACK 0.310 > . 1:1(0) ack 1001 // read 1000 byte 0.310 read(4, ..., 1000) = 1000 // Application writes 100 bytes 0.350 write(4, ..., 100) = 100 0.350 > P. 1:101(100) ack 1001 // ACK 0.500 < . 1001:1001(0) ack 101 win 257 // close the connection 0.600 close(4) = 0 0.600 > F. 101:101(0) ack 1001 win 244 // Our side is in FIN_WAIT_1 & waits for ack to fin 0.7 < . 1001:1001(0) ack 102 win 244 // Our side is in FIN_WAIT_2 with no outstanding data. 0.8 < F. 1001:1001(0) ack 102 win 244 0.8 > . 102:102(0) ack 1002 win 244 // Our side is now in TIME_WAIT state, send ack for fin. 0.9 < F. 1002:1002(0) ack 102 win 244 0.9 > . 102:102(0) ack 1002 win 244 // Peer reopens with in-window SYN: 1.000 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> // Therefore, reply with ACK. 1.000 > . 102:102(0) ack 1002 win 244 // Peer sends RST for this ACK. Normally this RST results // in tw socket removal, but rfc1337=1 setting prevents this. 1.100 < R 1002:1002(0) win 244 // second syn. Due to rfc1337=1 expect another pure ACK. 31.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> 31.0 > . 102:102(0) ack 1002 win 244 // .. and another RST from peer. 31.1 < R 1002:1002(0) win 244 31.2 `echo no timer restart;ss -m -e -a -i -n -t -o state TIME-WAIT` // third syn after one minute. Time-Wait socket should have expired by now. 63.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> // so we expect a syn-ack & 3whs to proceed from here on. 63.0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> Without this patch, 'ss' shows restarts of tw timer and last packet is thus just another pure ack, more than one minute later. This restores the original code from commit 283fd6cf0be690a83 ("Merge in ANK networking jumbo patch") in netdev-vger-cvs.git . For some reason the else branch was removed/lost in 1f28b683339f7 ("Merge in TCP/UDP optimizations and [..]") and timer restart became unconditional. Reported-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-30 12:24:29 +00:00
} else {
inet_twsk_reschedule(tw, TCP_TIMEWAIT_LEN);
}
if (tmp_opt.saw_tstamp) {
tcptw->tw_ts_recent = tmp_opt.rcv_tsval;
tcptw->tw_ts_recent_stamp = ktime_get_seconds();
}
inet_twsk_put(tw);
return TCP_TW_SUCCESS;
}
/* Out of window segment.
All the segments are ACKed immediately.
The only exception is new SYN. We accept it, if it is
not old duplicate and we are not in danger to be killed
by delayed old duplicates. RFC check is that it has
newer sequence number works at rates <40Mbit/sec.
However, if paws works, it is reliable AND even more,
we even may relax silly seq space cutoff.
RED-PEN: we violate main RFC requirement, if this SYN will appear
old duplicate (i.e. we receive RST in reply to SYN-ACK),
we must return socket to time-wait state. It is not good,
but not fatal yet.
*/
if (th->syn && !th->rst && !th->ack && !paws_reject &&
(after(TCP_SKB_CB(skb)->seq, tcptw->tw_rcv_nxt) ||
(tmp_opt.saw_tstamp &&
(s32)(tcptw->tw_ts_recent - tmp_opt.rcv_tsval) < 0))) {
u32 isn = tcptw->tw_snd_nxt + 65535 + 2;
if (isn == 0)
isn++;
TCP_SKB_CB(skb)->tcp_tw_isn = isn;
return TCP_TW_SYN;
}
if (paws_reject)
__NET_INC_STATS(twsk_net(tw), LINUX_MIB_PAWSESTABREJECTED);
if (!th->rst) {
/* In this case we must reset the TIMEWAIT timer.
*
* If it is ACKless SYN it may be both old duplicate
* and new good SYN with random sequence number <rcv_nxt.
* Do not reschedule in the last case.
*/
if (paws_reject || th->ack)
inet_twsk_reschedule(tw, TCP_TIMEWAIT_LEN);
return tcp_timewait_check_oow_rate_limit(
tw, skb, LINUX_MIB_TCPACKSKIPPEDTIMEWAIT);
}
inet_twsk_put(tw);
return TCP_TW_SUCCESS;
}
EXPORT_SYMBOL(tcp_timewait_state_process);
/*
* Move a socket to time-wait or dead fin-wait-2 state.
*/
void tcp_time_wait(struct sock *sk, int state, int timeo)
{
const struct inet_connection_sock *icsk = inet_csk(sk);
const struct tcp_sock *tp = tcp_sk(sk);
tcp/dccp: get rid of central timewait timer Using a timer wheel for timewait sockets was nice ~15 years ago when memory was expensive and machines had a single processor. This does not scale, code is ugly and source of huge latencies (Typically 30 ms have been seen, cpus spinning on death_lock spinlock.) We can afford to use an extra 64 bytes per timewait sock and spread timewait load to all cpus to have better behavior. Tested: On following test, /proc/sys/net/ipv4/tcp_tw_recycle is set to 1 on the target (lpaa24) Before patch : lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 419594 lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 437171 While test is running, we can observe 25 or even 33 ms latencies. lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 20601ms rtt min/avg/max/mdev = 0.020/0.217/25.771/1.535 ms, pipe 2 lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 20702ms rtt min/avg/max/mdev = 0.019/0.183/33.761/1.441 ms, pipe 2 After patch : About 90% increase of throughput : lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 810442 lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 800992 And latencies are kept to minimal values during this load, even if network utilization is 90% higher : lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 19991ms rtt min/avg/max/mdev = 0.023/0.064/0.360/0.042 ms Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-13 01:51:09 +00:00
struct inet_timewait_sock *tw;
struct inet_timewait_death_row *tcp_death_row = &sock_net(sk)->ipv4.tcp_death_row;
tw = inet_twsk_alloc(sk, tcp_death_row, state);
if (tw) {
struct tcp_timewait_sock *tcptw = tcp_twsk((struct sock *)tw);
const int rto = (icsk->icsk_rto << 2) - (icsk->icsk_rto >> 1);
struct inet_sock *inet = inet_sk(sk);
tw->tw_transparent = inet->transparent;
tw->tw_mark = sk->sk_mark;
tw->tw_priority = sk->sk_priority;
tw->tw_rcv_wscale = tp->rx_opt.rcv_wscale;
tcptw->tw_rcv_nxt = tp->rcv_nxt;
tcptw->tw_snd_nxt = tp->snd_nxt;
tcptw->tw_rcv_wnd = tcp_receive_window(tp);
tcptw->tw_ts_recent = tp->rx_opt.ts_recent;
tcptw->tw_ts_recent_stamp = tp->rx_opt.ts_recent_stamp;
tcptw->tw_ts_offset = tp->tsoffset;
tcptw->tw_last_oow_ack_time = 0;
tcp: add optional per socket transmit delay Adding delays to TCP flows is crucial for studying behavior of TCP stacks, including congestion control modules. Linux offers netem module, but it has unpractical constraints : - Need root access to change qdisc - Hard to setup on egress if combined with non trivial qdisc like FQ - Single delay for all flows. EDT (Earliest Departure Time) adoption in TCP stack allows us to enable a per socket delay at a very small cost. Networking tools can now establish thousands of flows, each of them with a different delay, simulating real world conditions. This requires FQ packet scheduler or a EDT-enabled NIC. This patchs adds TCP_TX_DELAY socket option, to set a delay in usec units. unsigned int tx_delay = 10000; /* 10 msec */ setsockopt(fd, SOL_TCP, TCP_TX_DELAY, &tx_delay, sizeof(tx_delay)); Note that FQ packet scheduler limits might need some tweaking : man tc-fq PARAMETERS limit Hard limit on the real queue size. When this limit is reached, new packets are dropped. If the value is lowered, packets are dropped so that the new limit is met. Default is 10000 packets. flow_limit Hard limit on the maximum number of packets queued per flow. Default value is 100. Use of TCP_TX_DELAY option will increase number of skbs in FQ qdisc, so packets would be dropped if any of the previous limit is hit. Use of a jump label makes this support runtime-free, for hosts never using the option. Also note that TSQ (TCP Small Queues) limits are slightly changed with this patch : we need to account that skbs artificially delayed wont stop us providind more skbs to feed the pipe (netem uses skb_orphan_partial() for this purpose, but FQ can not use this trick) Because of that, using big delays might very well trigger old bugs in TSO auto defer logic and/or sndbuf limited detection. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12 18:57:25 +00:00
tcptw->tw_tx_delay = tp->tcp_tx_delay;
#if IS_ENABLED(CONFIG_IPV6)
if (tw->tw_family == PF_INET6) {
struct ipv6_pinfo *np = inet6_sk(sk);
tw->tw_v6_daddr = sk->sk_v6_daddr;
tw->tw_v6_rcv_saddr = sk->sk_v6_rcv_saddr;
tw->tw_tclass = np->tclass;
tw->tw_flowlabel = be32_to_cpu(np->flow_label & IPV6_FLOWLABEL_MASK);
tw->tw_txhash = sk->sk_txhash;
tw->tw_ipv6only = sk->sk_ipv6only;
}
#endif
#ifdef CONFIG_TCP_MD5SIG
/*
* The timewait bucket does not have the key DB from the
* sock structure. We just make a quick copy of the
* md5 key being used (if indeed we are using one)
* so the timewait ack generating code has the key.
*/
do {
tcptw->tw_md5_key = NULL;
if (static_branch_unlikely(&tcp_md5_needed)) {
struct tcp_md5sig_key *key;
key = tp->af_specific->md5_lookup(sk, sk);
if (key) {
tcptw->tw_md5_key = kmemdup(key, sizeof(*key), GFP_ATOMIC);
BUG_ON(tcptw->tw_md5_key && !tcp_alloc_md5sig_pool());
}
}
} while (0);
#endif
/* Get the TIME_WAIT timeout firing. */
if (timeo < rto)
timeo = rto;
if (state == TCP_TIME_WAIT)
timeo = TCP_TIMEWAIT_LEN;
/* tw_timer is pinned, so we need to make sure BH are disabled
* in following section, otherwise timer handler could run before
* we complete the initialization.
*/
local_bh_disable();
tcp/dccp: get rid of central timewait timer Using a timer wheel for timewait sockets was nice ~15 years ago when memory was expensive and machines had a single processor. This does not scale, code is ugly and source of huge latencies (Typically 30 ms have been seen, cpus spinning on death_lock spinlock.) We can afford to use an extra 64 bytes per timewait sock and spread timewait load to all cpus to have better behavior. Tested: On following test, /proc/sys/net/ipv4/tcp_tw_recycle is set to 1 on the target (lpaa24) Before patch : lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 419594 lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 437171 While test is running, we can observe 25 or even 33 ms latencies. lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 20601ms rtt min/avg/max/mdev = 0.020/0.217/25.771/1.535 ms, pipe 2 lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 20702ms rtt min/avg/max/mdev = 0.019/0.183/33.761/1.441 ms, pipe 2 After patch : About 90% increase of throughput : lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 810442 lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 800992 And latencies are kept to minimal values during this load, even if network utilization is 90% higher : lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 19991ms rtt min/avg/max/mdev = 0.023/0.064/0.360/0.042 ms Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-13 01:51:09 +00:00
inet_twsk_schedule(tw, timeo);
/* Linkage updates.
* Note that access to tw after this point is illegal.
*/
inet_twsk_hashdance(tw, sk, &tcp_hashinfo);
local_bh_enable();
} else {
/* Sorry, if we're out of memory, just CLOSE this
* socket up. We've got bigger problems than
* non-graceful socket closings.
*/
NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPTIMEWAITOVERFLOW);
}
tcp_update_metrics(sk);
tcp_done(sk);
}
EXPORT_SYMBOL(tcp_time_wait);
void tcp_twsk_destructor(struct sock *sk)
{
#ifdef CONFIG_TCP_MD5SIG
if (static_branch_unlikely(&tcp_md5_needed)) {
struct tcp_timewait_sock *twsk = tcp_twsk(sk);
if (twsk->tw_md5_key)
kfree_rcu(twsk->tw_md5_key, rcu);
}
#endif
}
EXPORT_SYMBOL_GPL(tcp_twsk_destructor);
/* Warning : This function is called without sk_listener being locked.
* Be sure to read socket fields once, as their value could change under us.
*/
void tcp_openreq_init_rwin(struct request_sock *req,
const struct sock *sk_listener,
const struct dst_entry *dst)
{
struct inet_request_sock *ireq = inet_rsk(req);
const struct tcp_sock *tp = tcp_sk(sk_listener);
int full_space = tcp_full_space(sk_listener);
u32 window_clamp;
__u8 rcv_wscale;
u32 rcv_wnd;
int mss;
mss = tcp_mss_clamp(tp, dst_metric_advmss(dst));
window_clamp = READ_ONCE(tp->window_clamp);
/* Set this up on the first call only */
req->rsk_window_clamp = window_clamp ? : dst_metric(dst, RTAX_WINDOW);
/* limit the window selection if the user enforce a smaller rx buffer */
if (sk_listener->sk_userlocks & SOCK_RCVBUF_LOCK &&
(req->rsk_window_clamp > full_space || req->rsk_window_clamp == 0))
req->rsk_window_clamp = full_space;
rcv_wnd = tcp_rwnd_init_bpf((struct sock *)req);
if (rcv_wnd == 0)
rcv_wnd = dst_metric(dst, RTAX_INITRWND);
else if (full_space < rcv_wnd * mss)
full_space = rcv_wnd * mss;
/* tcp_full_space because it is guaranteed to be the first packet */
tcp_select_initial_window(sk_listener, full_space,
mss - (ireq->tstamp_ok ? TCPOLEN_TSTAMP_ALIGNED : 0),
&req->rsk_rcv_wnd,
&req->rsk_window_clamp,
ireq->wscale_ok,
&rcv_wscale,
rcv_wnd);
ireq->rcv_wscale = rcv_wscale;
}
EXPORT_SYMBOL(tcp_openreq_init_rwin);
static void tcp_ecn_openreq_child(struct tcp_sock *tp,
const struct request_sock *req)
{
tp->ecn_flags = inet_rsk(req)->ecn_ok ? TCP_ECN_OK : 0;
}
net: tcp: add per route congestion control This work adds the possibility to define a per route/destination congestion control algorithm. Generally, this opens up the possibility for a machine with different links to enforce specific congestion control algorithms with optimal strategies for each of them based on their network characteristics, even transparently for a single application listening on all links. For our specific use case, this additionally facilitates deployment of DCTCP, for example, applications can easily serve internal traffic/dsts in DCTCP and external one with CUBIC. Other scenarios would also allow for utilizing e.g. long living, low priority background flows for certain destinations/routes while still being able for normal traffic to utilize the default congestion control algorithm. We also thought about a per netns setting (where different defaults are possible), but given its actually a link specific property, we argue that a per route/destination setting is the most natural and flexible. The administrator can utilize this through ip-route(8) by appending "congctl [lock] <name>", where <name> denotes the name of a congestion control algorithm and the optional lock parameter allows to enforce the given algorithm so that applications in user space would not be allowed to overwrite that algorithm for that destination. The dst metric lookups are being done when a dst entry is already available in order to avoid a costly lookup and still before the algorithms are being initialized, thus overhead is very low when the feature is not being used. While the client side would need to drop the current reference on the module, on server side this can actually even be avoided as we just got a flat-copied socket clone. Joint work with Florian Westphal. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-05 22:57:48 +00:00
void tcp_ca_openreq_child(struct sock *sk, const struct dst_entry *dst)
{
struct inet_connection_sock *icsk = inet_csk(sk);
u32 ca_key = dst_metric(dst, RTAX_CC_ALGO);
bool ca_got_dst = false;
if (ca_key != TCP_CA_UNSPEC) {
const struct tcp_congestion_ops *ca;
rcu_read_lock();
ca = tcp_ca_find_key(ca_key);
bpf: tcp: Support tcp_congestion_ops in bpf This patch makes "struct tcp_congestion_ops" to be the first user of BPF STRUCT_OPS. It allows implementing a tcp_congestion_ops in bpf. The BPF implemented tcp_congestion_ops can be used like regular kernel tcp-cc through sysctl and setsockopt. e.g. [root@arch-fb-vm1 bpf]# sysctl -a | egrep congestion net.ipv4.tcp_allowed_congestion_control = reno cubic bpf_cubic net.ipv4.tcp_available_congestion_control = reno bic cubic bpf_cubic net.ipv4.tcp_congestion_control = bpf_cubic There has been attempt to move the TCP CC to the user space (e.g. CCP in TCP). The common arguments are faster turn around, get away from long-tail kernel versions in production...etc, which are legit points. BPF has been the continuous effort to join both kernel and userspace upsides together (e.g. XDP to gain the performance advantage without bypassing the kernel). The recent BPF advancements (in particular BTF-aware verifier, BPF trampoline, BPF CO-RE...) made implementing kernel struct ops (e.g. tcp cc) possible in BPF. It allows a faster turnaround for testing algorithm in the production while leveraging the existing (and continue growing) BPF feature/framework instead of building one specifically for userspace TCP CC. This patch allows write access to a few fields in tcp-sock (in bpf_tcp_ca_btf_struct_access()). The optional "get_info" is unsupported now. It can be added later. One possible way is to output the info with a btf-id to describe the content. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003508.3856115-1-kafai@fb.com
2020-01-09 00:35:08 +00:00
if (likely(ca && bpf_try_module_get(ca, ca->owner))) {
net: tcp: add per route congestion control This work adds the possibility to define a per route/destination congestion control algorithm. Generally, this opens up the possibility for a machine with different links to enforce specific congestion control algorithms with optimal strategies for each of them based on their network characteristics, even transparently for a single application listening on all links. For our specific use case, this additionally facilitates deployment of DCTCP, for example, applications can easily serve internal traffic/dsts in DCTCP and external one with CUBIC. Other scenarios would also allow for utilizing e.g. long living, low priority background flows for certain destinations/routes while still being able for normal traffic to utilize the default congestion control algorithm. We also thought about a per netns setting (where different defaults are possible), but given its actually a link specific property, we argue that a per route/destination setting is the most natural and flexible. The administrator can utilize this through ip-route(8) by appending "congctl [lock] <name>", where <name> denotes the name of a congestion control algorithm and the optional lock parameter allows to enforce the given algorithm so that applications in user space would not be allowed to overwrite that algorithm for that destination. The dst metric lookups are being done when a dst entry is already available in order to avoid a costly lookup and still before the algorithms are being initialized, thus overhead is very low when the feature is not being used. While the client side would need to drop the current reference on the module, on server side this can actually even be avoided as we just got a flat-copied socket clone. Joint work with Florian Westphal. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-05 22:57:48 +00:00
icsk->icsk_ca_dst_locked = tcp_ca_dst_locked(dst);
icsk->icsk_ca_ops = ca;
ca_got_dst = true;
}
rcu_read_unlock();
}
tcp: fix child sockets to use system default congestion control if not set Linux 3.17 and earlier are explicitly engineered so that if the app doesn't specifically request a CC module on a listener before the SYN arrives, then the child gets the system default CC when the connection is established. See tcp_init_congestion_control() in 3.17 or earlier, which says "if no choice made yet assign the current value set as default". The change ("net: tcp: assign tcp cong_ops when tcp sk is created") altered these semantics, so that children got their parent listener's congestion control even if the system default had changed after the listener was created. This commit returns to those original semantics from 3.17 and earlier, since they are the original semantics from 2007 in 4d4d3d1e8 ("[TCP]: Congestion control initialization."), and some Linux congestion control workflows depend on that. In summary, if a listener socket specifically sets TCP_CONGESTION to "x", or the route locks the CC module to "x", then the child gets "x". Otherwise the child gets current system default from net.ipv4.tcp_congestion_control. That's the behavior in 3.17 and earlier, and this commit restores that. Fixes: 55d8694fa82c ("net: tcp: assign tcp cong_ops when tcp sk is created") Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-29 17:47:07 +00:00
/* If no valid choice made yet, assign current system default ca. */
if (!ca_got_dst &&
(!icsk->icsk_ca_setsockopt ||
bpf: tcp: Support tcp_congestion_ops in bpf This patch makes "struct tcp_congestion_ops" to be the first user of BPF STRUCT_OPS. It allows implementing a tcp_congestion_ops in bpf. The BPF implemented tcp_congestion_ops can be used like regular kernel tcp-cc through sysctl and setsockopt. e.g. [root@arch-fb-vm1 bpf]# sysctl -a | egrep congestion net.ipv4.tcp_allowed_congestion_control = reno cubic bpf_cubic net.ipv4.tcp_available_congestion_control = reno bic cubic bpf_cubic net.ipv4.tcp_congestion_control = bpf_cubic There has been attempt to move the TCP CC to the user space (e.g. CCP in TCP). The common arguments are faster turn around, get away from long-tail kernel versions in production...etc, which are legit points. BPF has been the continuous effort to join both kernel and userspace upsides together (e.g. XDP to gain the performance advantage without bypassing the kernel). The recent BPF advancements (in particular BTF-aware verifier, BPF trampoline, BPF CO-RE...) made implementing kernel struct ops (e.g. tcp cc) possible in BPF. It allows a faster turnaround for testing algorithm in the production while leveraging the existing (and continue growing) BPF feature/framework instead of building one specifically for userspace TCP CC. This patch allows write access to a few fields in tcp-sock (in bpf_tcp_ca_btf_struct_access()). The optional "get_info" is unsupported now. It can be added later. One possible way is to output the info with a btf-id to describe the content. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003508.3856115-1-kafai@fb.com
2020-01-09 00:35:08 +00:00
!bpf_try_module_get(icsk->icsk_ca_ops, icsk->icsk_ca_ops->owner)))
net: tcp: add per route congestion control This work adds the possibility to define a per route/destination congestion control algorithm. Generally, this opens up the possibility for a machine with different links to enforce specific congestion control algorithms with optimal strategies for each of them based on their network characteristics, even transparently for a single application listening on all links. For our specific use case, this additionally facilitates deployment of DCTCP, for example, applications can easily serve internal traffic/dsts in DCTCP and external one with CUBIC. Other scenarios would also allow for utilizing e.g. long living, low priority background flows for certain destinations/routes while still being able for normal traffic to utilize the default congestion control algorithm. We also thought about a per netns setting (where different defaults are possible), but given its actually a link specific property, we argue that a per route/destination setting is the most natural and flexible. The administrator can utilize this through ip-route(8) by appending "congctl [lock] <name>", where <name> denotes the name of a congestion control algorithm and the optional lock parameter allows to enforce the given algorithm so that applications in user space would not be allowed to overwrite that algorithm for that destination. The dst metric lookups are being done when a dst entry is already available in order to avoid a costly lookup and still before the algorithms are being initialized, thus overhead is very low when the feature is not being used. While the client side would need to drop the current reference on the module, on server side this can actually even be avoided as we just got a flat-copied socket clone. Joint work with Florian Westphal. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-05 22:57:48 +00:00
tcp_assign_congestion_control(sk);
tcp_set_ca_state(sk, TCP_CA_Open);
}
EXPORT_SYMBOL_GPL(tcp_ca_openreq_child);
static void smc_check_reset_syn_req(struct tcp_sock *oldtp,
struct request_sock *req,
struct tcp_sock *newtp)
{
#if IS_ENABLED(CONFIG_SMC)
struct inet_request_sock *ireq;
if (static_branch_unlikely(&tcp_have_smc)) {
ireq = inet_rsk(req);
if (oldtp->syn_smc && !ireq->smc_ok)
newtp->syn_smc = 0;
}
#endif
}
/* This is not only more efficient than what we used to do, it eliminates
* a lot of code duplication between IPv4/IPv6 SYN recv processing. -DaveM
*
* Actually, we could lots of memory writes here. tp of listening
* socket contains all necessary default parameters.
*/
struct sock *tcp_create_openreq_child(const struct sock *sk,
struct request_sock *req,
struct sk_buff *skb)
{
struct sock *newsk = inet_csk_clone_lock(sk, req, GFP_ATOMIC);
const struct inet_request_sock *ireq = inet_rsk(req);
struct tcp_request_sock *treq = tcp_rsk(req);
struct inet_connection_sock *newicsk;
struct tcp_sock *oldtp, *newtp;
tcp: annotate tp->rcv_nxt lockless reads There are few places where we fetch tp->rcv_nxt while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that tcp_inq_hint() was already using READ_ONCE(tp->rcv_nxt) syzbot reported : BUG: KCSAN: data-race in tcp_poll / tcp_queue_rcv write to 0xffff888120425770 of 4 bytes by interrupt on cpu 0: tcp_rcv_nxt_update net/ipv4/tcp_input.c:3365 [inline] tcp_queue_rcv+0x180/0x380 net/ipv4/tcp_input.c:4638 tcp_rcv_established+0xbf1/0xf50 net/ipv4/tcp_input.c:5616 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1542 tcp_v4_rcv+0x1a03/0x1bf0 net/ipv4/tcp_ipv4.c:1923 ip_protocol_deliver_rcu+0x51/0x470 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5004 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5118 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5208 napi_skb_finish net/core/dev.c:5671 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5704 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 read to 0xffff888120425770 of 4 bytes by task 7254 on cpu 1: tcp_stream_is_readable net/ipv4/tcp.c:480 [inline] tcp_poll+0x204/0x6b0 net/ipv4/tcp.c:554 sock_poll+0xed/0x250 net/socket.c:1256 vfs_poll include/linux/poll.h:90 [inline] ep_item_poll.isra.0+0x90/0x190 fs/eventpoll.c:892 ep_send_events_proc+0x113/0x5c0 fs/eventpoll.c:1749 ep_scan_ready_list.constprop.0+0x189/0x500 fs/eventpoll.c:704 ep_send_events fs/eventpoll.c:1793 [inline] ep_poll+0xe3/0x900 fs/eventpoll.c:1930 do_epoll_wait+0x162/0x180 fs/eventpoll.c:2294 __do_sys_epoll_pwait fs/eventpoll.c:2325 [inline] __se_sys_epoll_pwait fs/eventpoll.c:2311 [inline] __x64_sys_epoll_pwait+0xcd/0x170 fs/eventpoll.c:2311 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 7254 Comm: syz-fuzzer Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-11 03:17:39 +00:00
u32 seq;
if (!newsk)
return NULL;
newicsk = inet_csk(newsk);
newtp = tcp_sk(newsk);
oldtp = tcp_sk(sk);
smc_check_reset_syn_req(oldtp, req, newtp);
/* Now setup tcp_sock */
newtp->pred_flags = 0;
tcp: annotate tp->rcv_nxt lockless reads There are few places where we fetch tp->rcv_nxt while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that tcp_inq_hint() was already using READ_ONCE(tp->rcv_nxt) syzbot reported : BUG: KCSAN: data-race in tcp_poll / tcp_queue_rcv write to 0xffff888120425770 of 4 bytes by interrupt on cpu 0: tcp_rcv_nxt_update net/ipv4/tcp_input.c:3365 [inline] tcp_queue_rcv+0x180/0x380 net/ipv4/tcp_input.c:4638 tcp_rcv_established+0xbf1/0xf50 net/ipv4/tcp_input.c:5616 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1542 tcp_v4_rcv+0x1a03/0x1bf0 net/ipv4/tcp_ipv4.c:1923 ip_protocol_deliver_rcu+0x51/0x470 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5004 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5118 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5208 napi_skb_finish net/core/dev.c:5671 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5704 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 read to 0xffff888120425770 of 4 bytes by task 7254 on cpu 1: tcp_stream_is_readable net/ipv4/tcp.c:480 [inline] tcp_poll+0x204/0x6b0 net/ipv4/tcp.c:554 sock_poll+0xed/0x250 net/socket.c:1256 vfs_poll include/linux/poll.h:90 [inline] ep_item_poll.isra.0+0x90/0x190 fs/eventpoll.c:892 ep_send_events_proc+0x113/0x5c0 fs/eventpoll.c:1749 ep_scan_ready_list.constprop.0+0x189/0x500 fs/eventpoll.c:704 ep_send_events fs/eventpoll.c:1793 [inline] ep_poll+0xe3/0x900 fs/eventpoll.c:1930 do_epoll_wait+0x162/0x180 fs/eventpoll.c:2294 __do_sys_epoll_pwait fs/eventpoll.c:2325 [inline] __se_sys_epoll_pwait fs/eventpoll.c:2311 [inline] __x64_sys_epoll_pwait+0xcd/0x170 fs/eventpoll.c:2311 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 7254 Comm: syz-fuzzer Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-11 03:17:39 +00:00
seq = treq->rcv_isn + 1;
newtp->rcv_wup = seq;
WRITE_ONCE(newtp->copied_seq, seq);
tcp: annotate tp->rcv_nxt lockless reads There are few places where we fetch tp->rcv_nxt while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that tcp_inq_hint() was already using READ_ONCE(tp->rcv_nxt) syzbot reported : BUG: KCSAN: data-race in tcp_poll / tcp_queue_rcv write to 0xffff888120425770 of 4 bytes by interrupt on cpu 0: tcp_rcv_nxt_update net/ipv4/tcp_input.c:3365 [inline] tcp_queue_rcv+0x180/0x380 net/ipv4/tcp_input.c:4638 tcp_rcv_established+0xbf1/0xf50 net/ipv4/tcp_input.c:5616 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1542 tcp_v4_rcv+0x1a03/0x1bf0 net/ipv4/tcp_ipv4.c:1923 ip_protocol_deliver_rcu+0x51/0x470 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5004 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5118 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5208 napi_skb_finish net/core/dev.c:5671 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5704 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 read to 0xffff888120425770 of 4 bytes by task 7254 on cpu 1: tcp_stream_is_readable net/ipv4/tcp.c:480 [inline] tcp_poll+0x204/0x6b0 net/ipv4/tcp.c:554 sock_poll+0xed/0x250 net/socket.c:1256 vfs_poll include/linux/poll.h:90 [inline] ep_item_poll.isra.0+0x90/0x190 fs/eventpoll.c:892 ep_send_events_proc+0x113/0x5c0 fs/eventpoll.c:1749 ep_scan_ready_list.constprop.0+0x189/0x500 fs/eventpoll.c:704 ep_send_events fs/eventpoll.c:1793 [inline] ep_poll+0xe3/0x900 fs/eventpoll.c:1930 do_epoll_wait+0x162/0x180 fs/eventpoll.c:2294 __do_sys_epoll_pwait fs/eventpoll.c:2325 [inline] __se_sys_epoll_pwait fs/eventpoll.c:2311 [inline] __x64_sys_epoll_pwait+0xcd/0x170 fs/eventpoll.c:2311 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 7254 Comm: syz-fuzzer Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-11 03:17:39 +00:00
WRITE_ONCE(newtp->rcv_nxt, seq);
newtp->segs_in = 1;
seq = treq->snt_isn + 1;
newtp->snd_sml = newtp->snd_una = seq;
WRITE_ONCE(newtp->snd_nxt, seq);
newtp->snd_up = seq;
INIT_LIST_HEAD(&newtp->tsq_node);
INIT_LIST_HEAD(&newtp->tsorted_sent_queue);
tcp_init_wl(newtp, treq->rcv_isn);
minmax_reset(&newtp->rtt_min, tcp_jiffies32, ~0U);
newicsk->icsk_ack.lrcvtime = tcp_jiffies32;
newtp->lsndtime = tcp_jiffies32;
newsk->sk_txhash = treq->txhash;
newtp->total_retrans = req->num_retrans;
tcp_init_xmit_timers(newsk);
WRITE_ONCE(newtp->write_seq, newtp->pushed_seq = treq->snt_isn + 1);
if (sock_flag(newsk, SOCK_KEEPOPEN))
inet_csk_reset_keepalive_timer(newsk,
keepalive_time_when(newtp));
newtp->rx_opt.tstamp_ok = ireq->tstamp_ok;
newtp->rx_opt.sack_ok = ireq->sack_ok;
newtp->window_clamp = req->rsk_window_clamp;
newtp->rcv_ssthresh = req->rsk_rcv_wnd;
newtp->rcv_wnd = req->rsk_rcv_wnd;
newtp->rx_opt.wscale_ok = ireq->wscale_ok;
if (newtp->rx_opt.wscale_ok) {
newtp->rx_opt.snd_wscale = ireq->snd_wscale;
newtp->rx_opt.rcv_wscale = ireq->rcv_wscale;
} else {
newtp->rx_opt.snd_wscale = newtp->rx_opt.rcv_wscale = 0;
newtp->window_clamp = min(newtp->window_clamp, 65535U);
}
newtp->snd_wnd = ntohs(tcp_hdr(skb)->window) << newtp->rx_opt.snd_wscale;
newtp->max_window = newtp->snd_wnd;
if (newtp->rx_opt.tstamp_ok) {
newtp->rx_opt.ts_recent = req->ts_recent;
newtp->rx_opt.ts_recent_stamp = ktime_get_seconds();
newtp->tcp_header_len = sizeof(struct tcphdr) + TCPOLEN_TSTAMP_ALIGNED;
} else {
newtp->rx_opt.ts_recent_stamp = 0;
newtp->tcp_header_len = sizeof(struct tcphdr);
}
if (req->num_timeout) {
newtp->undo_marker = treq->snt_isn;
newtp->retrans_stamp = div_u64(treq->snt_synack,
USEC_PER_SEC / TCP_TS_HZ);
}
newtp->tsoffset = treq->ts_off;
#ifdef CONFIG_TCP_MD5SIG
newtp->md5sig_info = NULL; /*XXX*/
if (newtp->af_specific->md5_lookup(sk, newsk))
newtp->tcp_header_len += TCPOLEN_MD5SIG_ALIGNED;
#endif
if (skb->len >= TCP_MSS_DEFAULT + newtp->tcp_header_len)
newicsk->icsk_ack.last_seg_size = skb->len - newtp->tcp_header_len;
newtp->rx_opt.mss_clamp = req->mss;
tcp_ecn_openreq_child(newtp, req);
newtp->fastopen_req = NULL;
RCU_INIT_POINTER(newtp->fastopen_rsk, NULL);
tcp_bpf_clone(sk, newsk);
__TCP_INC_STATS(sock_net(sk), TCP_MIB_PASSIVEOPENS);
return newsk;
}
EXPORT_SYMBOL(tcp_create_openreq_child);
/*
* Process an incoming packet for SYN_RECV sockets represented as a
* request_sock. Normally sk is the listener socket but for TFO it
* points to the child socket.
*
* XXX (TFO) - The current impl contains a special check for ack
* validation and inside tcp_v4_reqsk_send_ack(). Can we do better?
*
* We don't need to initialize tmp_opt.sack_ok as we don't use the results
*/
struct sock *tcp_check_req(struct sock *sk, struct sk_buff *skb,
struct request_sock *req,
bool fastopen, bool *req_stolen)
{
struct tcp_options_received tmp_opt;
struct sock *child;
const struct tcphdr *th = tcp_hdr(skb);
__be32 flg = tcp_flag_word(th) & (TCP_FLAG_RST|TCP_FLAG_SYN|TCP_FLAG_ACK);
bool paws_reject = false;
bool own_req;
tmp_opt.saw_tstamp = 0;
if (th->doff > (sizeof(struct tcphdr)>>2)) {
tcp_parse_options(sock_net(sk), skb, &tmp_opt, 0, NULL);
if (tmp_opt.saw_tstamp) {
tmp_opt.ts_recent = req->ts_recent;
if (tmp_opt.rcv_tsecr)
tmp_opt.rcv_tsecr -= tcp_rsk(req)->ts_off;
/* We do not store true stamp, but it is not required,
* it can be estimated (approximately)
* from another data.
*/
tmp_opt.ts_recent_stamp = ktime_get_seconds() - ((TCP_TIMEOUT_INIT/HZ)<<req->num_timeout);
paws_reject = tcp_paws_reject(&tmp_opt, th->rst);
}
}
/* Check for pure retransmitted SYN. */
if (TCP_SKB_CB(skb)->seq == tcp_rsk(req)->rcv_isn &&
flg == TCP_FLAG_SYN &&
!paws_reject) {
/*
* RFC793 draws (Incorrectly! It was fixed in RFC1122)
* this case on figure 6 and figure 8, but formal
* protocol description says NOTHING.
* To be more exact, it says that we should send ACK,
* because this segment (at least, if it has no data)
* is out of window.
*
* CONCLUSION: RFC793 (even with RFC1122) DOES NOT
* describe SYN-RECV state. All the description
* is wrong, we cannot believe to it and should
* rely only on common sense and implementation
* experience.
*
* Enforce "SYN-ACK" according to figure 8, figure 6
* of RFC793, fixed by RFC1122.
*
* Note that even if there is new data in the SYN packet
* they will be thrown away too.
*
* Reset timer after retransmitting SYNACK, similar to
* the idea of fast retransmit in recovery.
*/
if (!tcp_oow_rate_limited(sock_net(sk), skb,
LINUX_MIB_TCPACKSKIPPEDSYNRECV,
&tcp_rsk(req)->last_oow_ack_time) &&
!inet_rtx_syn_ack(sk, req)) {
unsigned long expires = jiffies;
expires += min(TCP_TIMEOUT_INIT << req->num_timeout,
TCP_RTO_MAX);
if (!fastopen)
mod_timer_pending(&req->rsk_timer, expires);
else
req->rsk_timer.expires = expires;
}
return NULL;
}
/* Further reproduces section "SEGMENT ARRIVES"
for state SYN-RECEIVED of RFC793.
It is broken, however, it does not work only
when SYNs are crossed.
You would think that SYN crossing is impossible here, since
we should have a SYN_SENT socket (from connect()) on our end,
but this is not true if the crossed SYNs were sent to both
ends by a malicious third party. We must defend against this,
and to do that we first verify the ACK (as per RFC793, page
36) and reset if it is invalid. Is this a true full defense?
To convince ourselves, let us consider a way in which the ACK
test can still pass in this 'malicious crossed SYNs' case.
Malicious sender sends identical SYNs (and thus identical sequence
numbers) to both A and B:
A: gets SYN, seq=7
B: gets SYN, seq=7
By our good fortune, both A and B select the same initial
send sequence number of seven :-)
A: sends SYN|ACK, seq=7, ack_seq=8
B: sends SYN|ACK, seq=7, ack_seq=8
So we are now A eating this SYN|ACK, ACK test passes. So
does sequence test, SYN is truncated, and thus we consider
it a bare ACK.
tcp: Revert 'process defer accept as established' changes. This reverts two changesets, ec3c0982a2dd1e671bad8e9d26c28dcba0039d87 ("[TCP]: TCP_DEFER_ACCEPT updates - process as established") and the follow-on bug fix 9ae27e0adbf471c7a6b80102e38e1d5a346b3b38 ("tcp: Fix slab corruption with ipv6 and tcp6fuzz"). This change causes several problems, first reported by Ingo Molnar as a distcc-over-loopback regression where connections were getting stuck. Ilpo Järvinen first spotted the locking problems. The new function added by this code, tcp_defer_accept_check(), only has the child socket locked, yet it is modifying state of the parent listening socket. Fixing that is non-trivial at best, because we can't simply just grab the parent listening socket lock at this point, because it would create an ABBA deadlock. The normal ordering is parent listening socket --> child socket, but this code path would require the reverse lock ordering. Next is a problem noticed by Vitaliy Gusev, he noted: ---------------------------------------- >--- a/net/ipv4/tcp_timer.c >+++ b/net/ipv4/tcp_timer.c >@@ -481,6 +481,11 @@ static void tcp_keepalive_timer (unsigned long data) > goto death; > } > >+ if (tp->defer_tcp_accept.request && sk->sk_state == TCP_ESTABLISHED) { >+ tcp_send_active_reset(sk, GFP_ATOMIC); >+ goto death; Here socket sk is not attached to listening socket's request queue. tcp_done() will not call inet_csk_destroy_sock() (and tcp_v4_destroy_sock() which should release this sk) as socket is not DEAD. Therefore socket sk will be lost for freeing. ---------------------------------------- Finally, Alexey Kuznetsov argues that there might not even be any real value or advantage to these new semantics even if we fix all of the bugs: ---------------------------------------- Hiding from accept() sockets with only out-of-order data only is the only thing which is impossible with old approach. Is this really so valuable? My opinion: no, this is nothing but a new loophole to consume memory without control. ---------------------------------------- So revert this thing for now. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-12 23:31:35 +00:00
If icsk->icsk_accept_queue.rskq_defer_accept, we silently drop this
bare ACK. Otherwise, we create an established connection. Both
ends (listening sockets) accept the new incoming connection and try
to talk to each other. 8-)
Note: This case is both harmless, and rare. Possibility is about the
same as us discovering intelligent life on another plant tomorrow.
But generally, we should (RFC lies!) to accept ACK
from SYNACK both here and in tcp_rcv_state_process().
tcp_rcv_state_process() does not, hence, we do not too.
Note that the case is absolutely generic:
we cannot optimize anything here without
violating protocol. All the checks must be made
before attempt to create socket.
*/
/* RFC793 page 36: "If the connection is in any non-synchronized state ...
* and the incoming segment acknowledges something not yet
* sent (the segment carries an unacceptable ACK) ...
* a reset is sent."
*
* Invalid ACK: reset will be sent by listening socket.
* Note that the ACK validity check for a Fast Open socket is done
* elsewhere and is checked directly against the child socket rather
* than req because user data may have been sent out.
*/
if ((flg & TCP_FLAG_ACK) && !fastopen &&
TCPCT part 1d: define TCP cookie option, extend existing struct's Data structures are carefully composed to require minimal additions. For example, the struct tcp_options_received cookie_plus variable fits between existing 16-bit and 8-bit variables, requiring no additional space (taking alignment into consideration). There are no additions to tcp_request_sock, and only 1 pointer in tcp_sock. This is a significantly revised implementation of an earlier (year-old) patch that no longer applies cleanly, with permission of the original author (Adam Langley): http://thread.gmane.org/gmane.linux.network/102586 The principle difference is using a TCP option to carry the cookie nonce, instead of a user configured offset in the data. This is more flexible and less subject to user configuration error. Such a cookie option has been suggested for many years, and is also useful without SYN data, allowing several related concepts to use the same extension option. "Re: SYN floods (was: does history repeat itself?)", September 9, 1996. http://www.merit.net/mail.archives/nanog/1996-09/msg00235.html "Re: what a new TCP header might look like", May 12, 1998. ftp://ftp.isi.edu/end2end/end2end-interest-1998.mail These functions will also be used in subsequent patches that implement additional features. Requires: TCPCT part 1a: add request_values parameter for sending SYNACK TCPCT part 1b: generate Responder Cookie secret TCPCT part 1c: sysctl_tcp_cookie_size, socket option TCP_COOKIE_TRANSACTIONS Signed-off-by: William.Allen.Simpson@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 18:17:05 +00:00
(TCP_SKB_CB(skb)->ack_seq !=
tcp_rsk(req)->snt_isn + 1))
return sk;
/* Also, it would be not so bad idea to check rcv_tsecr, which
* is essentially ACK extension and too early or too late values
* should cause reset in unsynchronized states.
*/
/* RFC793: "first check sequence number". */
if (paws_reject || !tcp_in_window(TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq,
tcp_rsk(req)->rcv_nxt, tcp_rsk(req)->rcv_nxt + req->rsk_rcv_wnd)) {
/* Out of window: send ACK and drop. */
if (!(flg & TCP_FLAG_RST) &&
!tcp_oow_rate_limited(sock_net(sk), skb,
LINUX_MIB_TCPACKSKIPPEDSYNRECV,
&tcp_rsk(req)->last_oow_ack_time))
tcp: Fix kernel panic when calling tcp_v(4/6)_md5_do_lookup If the following packet flow happen, kernel will panic. MathineA MathineB SYN ----------------------> SYN+ACK <---------------------- ACK(bad seq) ----------------------> When a bad seq ACK is received, tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr)) is finally called by tcp_v4_reqsk_send_ack(), but the first parameter(skb->sk) is NULL at that moment, so kernel panic happens. This patch fixes this bug. OOPS output is as following: [ 302.812793] IP: [<c05cfaa6>] tcp_v4_md5_do_lookup+0x12/0x42 [ 302.817075] Oops: 0000 [#1] SMP [ 302.819815] Modules linked in: ipv6 loop dm_multipath rtc_cmos rtc_core rtc_lib pcspkr pcnet32 mii i2c_piix4 parport_pc i2c_core parport ac button ata_piix libata dm_mod mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] [ 302.849946] [ 302.851198] Pid: 0, comm: swapper Not tainted (2.6.27-rc1-guijf #5) [ 302.855184] EIP: 0060:[<c05cfaa6>] EFLAGS: 00010296 CPU: 0 [ 302.858296] EIP is at tcp_v4_md5_do_lookup+0x12/0x42 [ 302.861027] EAX: 0000001e EBX: 00000000 ECX: 00000046 EDX: 00000046 [ 302.864867] ESI: ceb69e00 EDI: 1467a8c0 EBP: cf75f180 ESP: c0792e54 [ 302.868333] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 302.871287] Process swapper (pid: 0, ti=c0792000 task=c0712340 task.ti=c0746000) [ 302.875592] Stack: c06f413a 00000000 cf75f180 ceb69e00 00000000 c05d0d86 000016d0 ceac5400 [ 302.883275] c05d28f8 000016d0 ceb69e00 ceb69e20 681bf6e3 00001000 00000000 0a67a8c0 [ 302.890971] ceac5400 c04250a3 c06f413a c0792eb0 c0792edc cf59a620 cf59a620 cf59a634 [ 302.900140] Call Trace: [ 302.902392] [<c05d0d86>] tcp_v4_reqsk_send_ack+0x17/0x35 [ 302.907060] [<c05d28f8>] tcp_check_req+0x156/0x372 [ 302.910082] [<c04250a3>] printk+0x14/0x18 [ 302.912868] [<c05d0aa1>] tcp_v4_do_rcv+0x1d3/0x2bf [ 302.917423] [<c05d26be>] tcp_v4_rcv+0x563/0x5b9 [ 302.920453] [<c05bb20f>] ip_local_deliver_finish+0xe8/0x183 [ 302.923865] [<c05bb10a>] ip_rcv_finish+0x286/0x2a3 [ 302.928569] [<c059e438>] dev_alloc_skb+0x11/0x25 [ 302.931563] [<c05a211f>] netif_receive_skb+0x2d6/0x33a [ 302.934914] [<d0917941>] pcnet32_poll+0x333/0x680 [pcnet32] [ 302.938735] [<c05a3b48>] net_rx_action+0x5c/0xfe [ 302.941792] [<c042856b>] __do_softirq+0x5d/0xc1 [ 302.944788] [<c042850e>] __do_softirq+0x0/0xc1 [ 302.948999] [<c040564b>] do_softirq+0x55/0x88 [ 302.951870] [<c04501b1>] handle_fasteoi_irq+0x0/0xa4 [ 302.954986] [<c04284da>] irq_exit+0x35/0x69 [ 302.959081] [<c0405717>] do_IRQ+0x99/0xae [ 302.961896] [<c040422b>] common_interrupt+0x23/0x28 [ 302.966279] [<c040819d>] default_idle+0x2a/0x3d [ 302.969212] [<c0402552>] cpu_idle+0xb2/0xd2 [ 302.972169] ======================= [ 302.974274] Code: fc ff 84 d2 0f 84 df fd ff ff e9 34 fe ff ff 83 c4 0c 5b 5e 5f 5d c3 90 90 57 89 d7 56 53 89 c3 50 68 3a 41 6f c0 e8 e9 55 e5 ff <8b> 93 9c 04 00 00 58 85 d2 59 74 1e 8b 72 10 31 db 31 c9 85 f6 [ 303.011610] EIP: [<c05cfaa6>] tcp_v4_md5_do_lookup+0x12/0x42 SS:ESP 0068:c0792e54 [ 303.018360] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07 06:50:04 +00:00
req->rsk_ops->send_ack(sk, skb, req);
if (paws_reject)
__NET_INC_STATS(sock_net(sk), LINUX_MIB_PAWSESTABREJECTED);
return NULL;
}
/* In sequence, PAWS is OK. */
if (tmp_opt.saw_tstamp && !after(TCP_SKB_CB(skb)->seq, tcp_rsk(req)->rcv_nxt))
req->ts_recent = tmp_opt.rcv_tsval;
if (TCP_SKB_CB(skb)->seq == tcp_rsk(req)->rcv_isn) {
/* Truncate SYN, it is out of window starting
at tcp_rsk(req)->rcv_isn + 1. */
flg &= ~TCP_FLAG_SYN;
}
/* RFC793: "second check the RST bit" and
* "fourth, check the SYN bit"
*/
if (flg & (TCP_FLAG_RST|TCP_FLAG_SYN)) {
__TCP_INC_STATS(sock_net(sk), TCP_MIB_ATTEMPTFAILS);
goto embryonic_reset;
}
/* ACK sequence verified above, just make sure ACK is
* set. If ACK not set, just silently drop the packet.
*
* XXX (TFO) - if we ever allow "data after SYN", the
* following check needs to be removed.
*/
if (!(flg & TCP_FLAG_ACK))
return NULL;
tcp: Revert 'process defer accept as established' changes. This reverts two changesets, ec3c0982a2dd1e671bad8e9d26c28dcba0039d87 ("[TCP]: TCP_DEFER_ACCEPT updates - process as established") and the follow-on bug fix 9ae27e0adbf471c7a6b80102e38e1d5a346b3b38 ("tcp: Fix slab corruption with ipv6 and tcp6fuzz"). This change causes several problems, first reported by Ingo Molnar as a distcc-over-loopback regression where connections were getting stuck. Ilpo Järvinen first spotted the locking problems. The new function added by this code, tcp_defer_accept_check(), only has the child socket locked, yet it is modifying state of the parent listening socket. Fixing that is non-trivial at best, because we can't simply just grab the parent listening socket lock at this point, because it would create an ABBA deadlock. The normal ordering is parent listening socket --> child socket, but this code path would require the reverse lock ordering. Next is a problem noticed by Vitaliy Gusev, he noted: ---------------------------------------- >--- a/net/ipv4/tcp_timer.c >+++ b/net/ipv4/tcp_timer.c >@@ -481,6 +481,11 @@ static void tcp_keepalive_timer (unsigned long data) > goto death; > } > >+ if (tp->defer_tcp_accept.request && sk->sk_state == TCP_ESTABLISHED) { >+ tcp_send_active_reset(sk, GFP_ATOMIC); >+ goto death; Here socket sk is not attached to listening socket's request queue. tcp_done() will not call inet_csk_destroy_sock() (and tcp_v4_destroy_sock() which should release this sk) as socket is not DEAD. Therefore socket sk will be lost for freeing. ---------------------------------------- Finally, Alexey Kuznetsov argues that there might not even be any real value or advantage to these new semantics even if we fix all of the bugs: ---------------------------------------- Hiding from accept() sockets with only out-of-order data only is the only thing which is impossible with old approach. Is this really so valuable? My opinion: no, this is nothing but a new loophole to consume memory without control. ---------------------------------------- So revert this thing for now. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-12 23:31:35 +00:00
/* For Fast Open no more processing is needed (sk is the
* child socket).
*/
if (fastopen)
return sk;
/* While TCP_DEFER_ACCEPT is active, drop bare ACK. */
tcp: better retrans tracking for defer-accept For passive TCP connections using TCP_DEFER_ACCEPT facility, we incorrectly increment req->retrans each time timeout triggers while no SYNACK is sent. SYNACK are not sent for TCP_DEFER_ACCEPT that were established (for which we received the ACK from client). Only the last SYNACK is sent so that we can receive again an ACK from client, to move the req into accept queue. We plan to change this later to avoid the useless retransmit (and potential problem as this SYNACK could be lost) TCP_INFO later gives wrong information to user, claiming imaginary retransmits. Decouple req->retrans field into two independent fields : num_retrans : number of retransmit num_timeout : number of timeouts num_timeout is the counter that is incremented at each timeout, regardless of actual SYNACK being sent or not, and used to compute the exponential timeout. Introduce inet_rtx_syn_ack() helper to increment num_retrans only if ->rtx_syn_ack() succeeded. Use inet_rtx_syn_ack() from tcp_check_req() to increment num_retrans when we re-send a SYNACK in answer to a (retransmitted) SYN. Prior to this patch, we were not counting these retransmits. Change tcp_v[46]_rtx_synack() to increment TCP_MIB_RETRANSSEGS only if a synack packet was successfully queued. Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Cc: Vijay Subramanian <subramanian.vijay@gmail.com> Cc: Elliott Hughes <enh@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-27 23:16:46 +00:00
if (req->num_timeout < inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
inet_rsk(req)->acked = 1;
__NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPDEFERACCEPTDROP);
return NULL;
}
/* OK, ACK is valid, create big socket and
* feed this segment to it. It will repeat all
* the tests. THIS SEGMENT MUST MOVE SOCKET TO
* ESTABLISHED STATE. If it will be dropped after
* socket is created, wait for troubles.
*/
child = inet_csk(sk)->icsk_af_ops->syn_recv_sock(sk, skb, req, NULL,
req, &own_req);
if (!child)
goto listen_overflow;
if (own_req && rsk_drop_req(req)) {
tcp: Migrate TCP_NEW_SYN_RECV requests at receiving the final ACK. This patch also changes the code to call reuseport_migrate_sock() and inet_reqsk_clone(), but unlike the other cases, we do not call inet_reqsk_clone() right after reuseport_migrate_sock(). Currently, in the receive path for TCP_NEW_SYN_RECV sockets, its listener has three kinds of refcnt: (A) for listener itself (B) carried by reuqest_sock (C) sock_hold() in tcp_v[46]_rcv() While processing the req, (A) may disappear by close(listener). Also, (B) can disappear by accept(listener) once we put the req into the accept queue. So, we have to hold another refcnt (C) for the listener to prevent use-after-free. For socket migration, we call reuseport_migrate_sock() to select a listener with (A) and to increment the new listener's refcnt in tcp_v[46]_rcv(). This refcnt corresponds to (C) and is cleaned up later in tcp_v[46]_rcv(). Thus we have to take another refcnt (B) for the newly cloned request_sock. In inet_csk_complete_hashdance(), we hold the count (B), clone the req, and try to put the new req into the accept queue. By migrating req after winning the "own_req" race, we can avoid such a worst situation: CPU 1 looks up req1 CPU 2 looks up req1, unhashes it, then CPU 1 loses the race CPU 3 looks up req2, unhashes it, then CPU 2 loses the race ... Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-8-kuniyu@amazon.co.jp
2021-06-12 12:32:20 +00:00
reqsk_queue_removed(&inet_csk(req->rsk_listener)->icsk_accept_queue, req);
inet_csk_reqsk_queue_drop_and_put(req->rsk_listener, req);
return child;
}
sock_rps_save_rxhash(child, skb);
tcp: usec resolution SYN/ACK RTT Currently SYN/ACK RTT is measured in jiffies. For LAN the SYN/ACK RTT is often measured as 0ms or sometimes 1ms, which would affect RTT estimation and min RTT samping used by some congestion control. This patch improves SYN/ACK RTT to be usec resolution if platform supports it. While the timestamping of SYN/ACK is done in request sock, the RTT measurement is carefully arranged to avoid storing another u64 timestamp in tcp_sock. For regular handshake w/o SYNACK retransmission, the RTT is sampled right after the child socket is created and right before the request sock is released (tcp_check_req() in tcp_minisocks.c) For Fast Open the child socket is already created when SYN/ACK was sent, the RTT is sampled in tcp_rcv_state_process() after processing the final ACK an right before the request socket is released. If the SYN/ACK was retransmistted or SYN-cookie was used, we rely on TCP timestamps to measure the RTT. The sample is taken at the same place in tcp_rcv_state_process() after the timestamp values are validated in tcp_validate_incoming(). Note that we do not store TS echo value in request_sock for SYN-cookies, because the value is already stored in tp->rx_opt used by tcp_ack_update_rtt(). One side benefit is that the RTT measurement now happens before initializing congestion control (of the passive side). Therefore the congestion control can use the SYN/ACK RTT. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18 18:36:14 +00:00
tcp_synack_rtt_meas(child, req);
*req_stolen = !own_req;
return inet_csk_complete_hashdance(sk, child, req, own_req);
listen_overflow:
if (sk != req->rsk_listener)
__NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPMIGRATEREQFAILURE);
if (!sock_net(sk)->ipv4.sysctl_tcp_abort_on_overflow) {
inet_rsk(req)->acked = 1;
return NULL;
}
embryonic_reset:
if (!(flg & TCP_FLAG_RST)) {
/* Received a bad SYN pkt - for TFO We try not to reset
* the local connection unless it's really necessary to
* avoid becoming vulnerable to outside attack aiming at
* resetting legit local connections.
*/
req->rsk_ops->send_reset(sk, skb);
} else if (fastopen) { /* received a valid RST pkt */
reqsk_fastopen_remove(sk, req, true);
tcp_reset(sk, skb);
}
if (!fastopen) {
bool unlinked = inet_csk_reqsk_queue_drop(sk, req);
if (unlinked)
__NET_INC_STATS(sock_net(sk), LINUX_MIB_EMBRYONICRSTS);
*req_stolen = !unlinked;
}
return NULL;
}
EXPORT_SYMBOL(tcp_check_req);
/*
* Queue segment on the new socket if the new socket is active,
* otherwise we just shortcircuit this and continue with
* the new socket.
*
* For the vast majority of cases child->sk_state will be TCP_SYN_RECV
* when entering. But other states are possible due to a race condition
* where after __inet_lookup_established() fails but before the listener
* locked is obtained, other packets cause the same connection to
* be created.
*/
int tcp_child_process(struct sock *parent, struct sock *child,
struct sk_buff *skb)
__releases(&((child)->sk_lock.slock))
{
int ret = 0;
int state = child->sk_state;
/* record NAPI ID of child */
sk_mark_napi_id(child, skb);
tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In Per RFC4898, they count segments sent/received containing a positive length data segment (that includes retransmission segments carrying data). Unlike tcpi_segs_out/in, tcpi_data_segs_out/in excludes segments carrying no data (e.g. pure ack). The patch also updates the segs_in in tcp_fastopen_add_skb() so that segs_in >= data_segs_in property is kept. Together with retransmission data, tcpi_data_segs_out gives a better signal on the rxmit rate. v6: Rebase on the latest net-next v5: Eric pointed out that checking skb->len is still needed in tcp_fastopen_add_skb() because skb can carry a FIN without data. Hence, instead of open coding segs_in and data_segs_in, tcp_segs_in() helper is used. Comment is added to the fastopen case to explain why segs_in has to be reset and tcp_segs_in() has to be called before __skb_pull(). v4: Add comment to the changes in tcp_fastopen_add_skb() and also add remark on this case in the commit message. v3: Add const modifier to the skb parameter in tcp_segs_in() v2: Rework based on recent fix by Eric: commit a9d99ce28ed3 ("tcp: fix tcpi_segs_in after connection establishment") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Chris Rapier <rapier@psc.edu> Cc: Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <mleitner@redhat.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 17:52:15 +00:00
tcp_segs_in(tcp_sk(child), skb);
if (!sock_owned_by_user(child)) {
ret = tcp_rcv_state_process(child, skb);
/* Wakeup parent, send SIGIO */
if (state == TCP_SYN_RECV && child->sk_state != state)
parent->sk_data_ready(parent);
} else {
/* Alas, it is possible again, because we do lookup
* in main socket hash table and lock on listening
* socket does not protect us more.
*/
__sk_add_backlog(child, skb);
}
bh_unlock_sock(child);
sock_put(child);
return ret;
}
EXPORT_SYMBOL(tcp_child_process);