linux/fs/squashfs/super.c

699 lines
18 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Squashfs - a compressed read only filesystem for Linux
*
* Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008
* Phillip Lougher <phillip@squashfs.org.uk>
*
* super.c
*/
/*
* This file implements code to read the superblock, read and initialise
* in-memory structures at mount time, and all the VFS glue code to register
* the filesystem.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/blkdev.h>
#include <linux/fs.h>
#include <linux/fs_context.h>
#include <linux/fs_parser.h>
#include <linux/vfs.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/seq_file.h>
#include <linux/pagemap.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/magic.h>
#include <linux/xattr.h>
#include "squashfs_fs.h"
#include "squashfs_fs_sb.h"
#include "squashfs_fs_i.h"
#include "squashfs.h"
#include "decompressor.h"
#include "xattr.h"
static struct file_system_type squashfs_fs_type;
static const struct super_operations squashfs_super_ops;
enum Opt_errors {
Opt_errors_continue,
Opt_errors_panic,
};
enum squashfs_param {
Opt_errors,
squashfs: add the mount parameter theads=<single|multi|percpu> Patch series 'squashfs: Add the mount parameter "threads="'. Currently, Squashfs supports multiple decompressor parallel modes. However, this mode can be configured only during kernel building and does not support flexible selection during runtime. In the current patch set, the mount parameter "threads=" is added to allow users to select the parallel decompressor mode and configure the number of decompressors when mounting a file system. "threads=<single|multi|percpu|1|2|3|...>" The upper limit is num_online_cpus() * 2. This patch (of 2): Squashfs supports three decompression concurrency modes: Single-thread mode: concurrent reads are blocked and the memory overhead is small. Multi-thread mode/percpu mode: reduces concurrent read blocking but increases memory overhead. The corresponding schema must be fixed at compile time. During mounting, the concurrent decompression mode cannot be adjusted based on file read blocking. The mount parameter theads=<single|multi|percpu> is added to select the concurrent decompression mode of a single SquashFS file system image. Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Jianguo Chen <chenjianguo3@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-19 03:09:29 +00:00
Opt_threads,
};
struct squashfs_mount_opts {
enum Opt_errors errors;
squashfs: add the mount parameter theads=<single|multi|percpu> Patch series 'squashfs: Add the mount parameter "threads="'. Currently, Squashfs supports multiple decompressor parallel modes. However, this mode can be configured only during kernel building and does not support flexible selection during runtime. In the current patch set, the mount parameter "threads=" is added to allow users to select the parallel decompressor mode and configure the number of decompressors when mounting a file system. "threads=<single|multi|percpu|1|2|3|...>" The upper limit is num_online_cpus() * 2. This patch (of 2): Squashfs supports three decompression concurrency modes: Single-thread mode: concurrent reads are blocked and the memory overhead is small. Multi-thread mode/percpu mode: reduces concurrent read blocking but increases memory overhead. The corresponding schema must be fixed at compile time. During mounting, the concurrent decompression mode cannot be adjusted based on file read blocking. The mount parameter theads=<single|multi|percpu> is added to select the concurrent decompression mode of a single SquashFS file system image. Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Jianguo Chen <chenjianguo3@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-19 03:09:29 +00:00
const struct squashfs_decompressor_thread_ops *thread_ops;
int thread_num;
};
static const struct constant_table squashfs_param_errors[] = {
{"continue", Opt_errors_continue },
{"panic", Opt_errors_panic },
{}
};
static const struct fs_parameter_spec squashfs_fs_parameters[] = {
fsparam_enum("errors", Opt_errors, squashfs_param_errors),
squashfs: add the mount parameter theads=<single|multi|percpu> Patch series 'squashfs: Add the mount parameter "threads="'. Currently, Squashfs supports multiple decompressor parallel modes. However, this mode can be configured only during kernel building and does not support flexible selection during runtime. In the current patch set, the mount parameter "threads=" is added to allow users to select the parallel decompressor mode and configure the number of decompressors when mounting a file system. "threads=<single|multi|percpu|1|2|3|...>" The upper limit is num_online_cpus() * 2. This patch (of 2): Squashfs supports three decompression concurrency modes: Single-thread mode: concurrent reads are blocked and the memory overhead is small. Multi-thread mode/percpu mode: reduces concurrent read blocking but increases memory overhead. The corresponding schema must be fixed at compile time. During mounting, the concurrent decompression mode cannot be adjusted based on file read blocking. The mount parameter theads=<single|multi|percpu> is added to select the concurrent decompression mode of a single SquashFS file system image. Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Jianguo Chen <chenjianguo3@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-19 03:09:29 +00:00
fsparam_string("threads", Opt_threads),
{}
};
static int squashfs_parse_param_threads_str(const char *str, struct squashfs_mount_opts *opts)
squashfs: add the mount parameter theads=<single|multi|percpu> Patch series 'squashfs: Add the mount parameter "threads="'. Currently, Squashfs supports multiple decompressor parallel modes. However, this mode can be configured only during kernel building and does not support flexible selection during runtime. In the current patch set, the mount parameter "threads=" is added to allow users to select the parallel decompressor mode and configure the number of decompressors when mounting a file system. "threads=<single|multi|percpu|1|2|3|...>" The upper limit is num_online_cpus() * 2. This patch (of 2): Squashfs supports three decompression concurrency modes: Single-thread mode: concurrent reads are blocked and the memory overhead is small. Multi-thread mode/percpu mode: reduces concurrent read blocking but increases memory overhead. The corresponding schema must be fixed at compile time. During mounting, the concurrent decompression mode cannot be adjusted based on file read blocking. The mount parameter theads=<single|multi|percpu> is added to select the concurrent decompression mode of a single SquashFS file system image. Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Jianguo Chen <chenjianguo3@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-19 03:09:29 +00:00
{
#ifdef CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT
if (strcmp(str, "single") == 0) {
opts->thread_ops = &squashfs_decompressor_single;
return 0;
}
if (strcmp(str, "multi") == 0) {
opts->thread_ops = &squashfs_decompressor_multi;
return 0;
}
if (strcmp(str, "percpu") == 0) {
opts->thread_ops = &squashfs_decompressor_percpu;
return 0;
}
#endif
return -EINVAL;
}
static int squashfs_parse_param_threads_num(const char *str, struct squashfs_mount_opts *opts)
{
#ifdef CONFIG_SQUASHFS_MOUNT_DECOMP_THREADS
int ret;
unsigned long num;
ret = kstrtoul(str, 0, &num);
if (ret != 0)
return -EINVAL;
if (num > 1) {
opts->thread_ops = &squashfs_decompressor_multi;
if (num > opts->thread_ops->max_decompressors())
return -EINVAL;
opts->thread_num = (int)num;
return 0;
}
#ifdef CONFIG_SQUASHFS_DECOMP_SINGLE
if (num == 1) {
opts->thread_ops = &squashfs_decompressor_single;
opts->thread_num = 1;
return 0;
}
#endif
#endif /* !CONFIG_SQUASHFS_MOUNT_DECOMP_THREADS */
return -EINVAL;
}
static int squashfs_parse_param_threads(const char *str, struct squashfs_mount_opts *opts)
{
int ret = squashfs_parse_param_threads_str(str, opts);
if (ret == 0)
return ret;
return squashfs_parse_param_threads_num(str, opts);
}
static int squashfs_parse_param(struct fs_context *fc, struct fs_parameter *param)
{
struct squashfs_mount_opts *opts = fc->fs_private;
struct fs_parse_result result;
int opt;
opt = fs_parse(fc, squashfs_fs_parameters, param, &result);
if (opt < 0)
return opt;
switch (opt) {
case Opt_errors:
opts->errors = result.uint_32;
break;
squashfs: add the mount parameter theads=<single|multi|percpu> Patch series 'squashfs: Add the mount parameter "threads="'. Currently, Squashfs supports multiple decompressor parallel modes. However, this mode can be configured only during kernel building and does not support flexible selection during runtime. In the current patch set, the mount parameter "threads=" is added to allow users to select the parallel decompressor mode and configure the number of decompressors when mounting a file system. "threads=<single|multi|percpu|1|2|3|...>" The upper limit is num_online_cpus() * 2. This patch (of 2): Squashfs supports three decompression concurrency modes: Single-thread mode: concurrent reads are blocked and the memory overhead is small. Multi-thread mode/percpu mode: reduces concurrent read blocking but increases memory overhead. The corresponding schema must be fixed at compile time. During mounting, the concurrent decompression mode cannot be adjusted based on file read blocking. The mount parameter theads=<single|multi|percpu> is added to select the concurrent decompression mode of a single SquashFS file system image. Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Jianguo Chen <chenjianguo3@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-19 03:09:29 +00:00
case Opt_threads:
if (squashfs_parse_param_threads(param->string, opts) != 0)
return -EINVAL;
break;
default:
return -EINVAL;
}
return 0;
}
static const struct squashfs_decompressor *supported_squashfs_filesystem(
struct fs_context *fc,
short major, short minor, short id)
{
const struct squashfs_decompressor *decompressor;
if (major < SQUASHFS_MAJOR) {
errorf(fc, "Major/Minor mismatch, older Squashfs %d.%d "
"filesystems are unsupported", major, minor);
return NULL;
} else if (major > SQUASHFS_MAJOR || minor > SQUASHFS_MINOR) {
errorf(fc, "Major/Minor mismatch, trying to mount newer "
"%d.%d filesystem", major, minor);
errorf(fc, "Please update your kernel");
return NULL;
}
decompressor = squashfs_lookup_decompressor(id);
if (!decompressor->supported) {
errorf(fc, "Filesystem uses \"%s\" compression. This is not supported",
decompressor->name);
return NULL;
}
return decompressor;
}
static int squashfs_fill_super(struct super_block *sb, struct fs_context *fc)
{
struct squashfs_mount_opts *opts = fc->fs_private;
struct squashfs_sb_info *msblk;
struct squashfs_super_block *sblk = NULL;
struct inode *root;
long long root_inode;
unsigned short flags;
unsigned int fragments;
u64 lookup_table_start, xattr_id_table_start, next_table;
int err;
TRACE("Entered squashfs_fill_superblock\n");
sb->s_fs_info = kzalloc(sizeof(*msblk), GFP_KERNEL);
if (sb->s_fs_info == NULL) {
ERROR("Failed to allocate squashfs_sb_info\n");
return -ENOMEM;
}
msblk = sb->s_fs_info;
squashfs: fix null-ptr-deref in squashfs_fill_super When squashfs_read_table() returns an error or `sb->s_magic != SQUASHFS_MAGIC`, enters the error branch and calls msblk->thread_ops->destroy(msblk) to destroy msblk. However, msblk->thread_ops has not been initialized. Therefore, the following problem is triggered: ================================================================== BUG: KASAN: null-ptr-deref in squashfs_fill_super+0xe7a/0x13b0 Read of size 8 at addr 0000000000000008 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc3-next-20221031 #367 Call Trace: <TASK> dump_stack_lvl+0x73/0x9f print_report+0x743/0x759 kasan_report+0xc0/0x120 __asan_load8+0xd3/0x140 squashfs_fill_super+0xe7a/0x13b0 get_tree_bdev+0x27b/0x450 squashfs_get_tree+0x19/0x30 vfs_get_tree+0x49/0x150 path_mount+0xaae/0x1350 init_mount+0xad/0x100 do_mount_root+0xbc/0x1d0 mount_block_root+0x173/0x316 mount_root+0x223/0x236 prepare_namespace+0x1eb/0x237 kernel_init_freeable+0x528/0x576 kernel_init+0x29/0x250 ret_from_fork+0x1f/0x30 </TASK> ================================================================== To solve this issue, msblk->thread_ops is initialized immediately after msblk is assigned a value. Link: https://lkml.kernel.org/r/20221101073343.3961562-1-libaokun1@huawei.com Fixes: b0645770d3c7 ("squashfs: add the mount parameter theads=<single|multi|percpu>") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-01 07:33:43 +00:00
msblk->thread_ops = opts->thread_ops;
msblk->panic_on_errors = (opts->errors == Opt_errors_panic);
msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE);
msblk->devblksize_log2 = ffz(~msblk->devblksize);
mutex_init(&msblk->meta_index_mutex);
/*
* msblk->bytes_used is checked in squashfs_read_table to ensure reads
* are not beyond filesystem end. But as we're using
* squashfs_read_table here to read the superblock (including the value
* of bytes_used) we need to set it to an initial sensible dummy value
*/
msblk->bytes_used = sizeof(*sblk);
sblk = squashfs_read_table(sb, SQUASHFS_START, sizeof(*sblk));
if (IS_ERR(sblk)) {
errorf(fc, "unable to read squashfs_super_block");
err = PTR_ERR(sblk);
sblk = NULL;
goto failed_mount;
}
err = -EINVAL;
/* Check it is a SQUASHFS superblock */
sb->s_magic = le32_to_cpu(sblk->s_magic);
if (sb->s_magic != SQUASHFS_MAGIC) {
if (!(fc->sb_flags & SB_SILENT))
errorf(fc, "Can't find a SQUASHFS superblock on %pg",
sb->s_bdev);
goto failed_mount;
}
squashfs: fix null-ptr-deref in squashfs_fill_super When squashfs_read_table() returns an error or `sb->s_magic != SQUASHFS_MAGIC`, enters the error branch and calls msblk->thread_ops->destroy(msblk) to destroy msblk. However, msblk->thread_ops has not been initialized. Therefore, the following problem is triggered: ================================================================== BUG: KASAN: null-ptr-deref in squashfs_fill_super+0xe7a/0x13b0 Read of size 8 at addr 0000000000000008 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc3-next-20221031 #367 Call Trace: <TASK> dump_stack_lvl+0x73/0x9f print_report+0x743/0x759 kasan_report+0xc0/0x120 __asan_load8+0xd3/0x140 squashfs_fill_super+0xe7a/0x13b0 get_tree_bdev+0x27b/0x450 squashfs_get_tree+0x19/0x30 vfs_get_tree+0x49/0x150 path_mount+0xaae/0x1350 init_mount+0xad/0x100 do_mount_root+0xbc/0x1d0 mount_block_root+0x173/0x316 mount_root+0x223/0x236 prepare_namespace+0x1eb/0x237 kernel_init_freeable+0x528/0x576 kernel_init+0x29/0x250 ret_from_fork+0x1f/0x30 </TASK> ================================================================== To solve this issue, msblk->thread_ops is initialized immediately after msblk is assigned a value. Link: https://lkml.kernel.org/r/20221101073343.3961562-1-libaokun1@huawei.com Fixes: b0645770d3c7 ("squashfs: add the mount parameter theads=<single|multi|percpu>") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-01 07:33:43 +00:00
if (opts->thread_num == 0) {
msblk->max_thread_num = msblk->thread_ops->max_decompressors();
} else {
msblk->max_thread_num = opts->thread_num;
}
/* Check the MAJOR & MINOR versions and lookup compression type */
msblk->decompressor = supported_squashfs_filesystem(
fc,
le16_to_cpu(sblk->s_major),
le16_to_cpu(sblk->s_minor),
le16_to_cpu(sblk->compression));
if (msblk->decompressor == NULL)
goto failed_mount;
/* Check the filesystem does not extend beyond the end of the
block device */
msblk->bytes_used = le64_to_cpu(sblk->bytes_used);
if (msblk->bytes_used < 0 ||
msblk->bytes_used > bdev_nr_bytes(sb->s_bdev))
goto failed_mount;
/* Check block size for sanity */
msblk->block_size = le32_to_cpu(sblk->block_size);
if (msblk->block_size > SQUASHFS_FILE_MAX_SIZE)
goto insanity;
/*
* Check the system page size is not larger than the filesystem
* block size (by default 128K). This is currently not supported.
*/
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
if (PAGE_SIZE > msblk->block_size) {
errorf(fc, "Page size > filesystem block size (%d). This is "
"currently not supported!", msblk->block_size);
goto failed_mount;
}
/* Check block log for sanity */
msblk->block_log = le16_to_cpu(sblk->block_log);
if (msblk->block_log > SQUASHFS_FILE_MAX_LOG)
goto failed_mount;
/* Check that block_size and block_log match */
if (msblk->block_size != (1 << msblk->block_log))
goto insanity;
/* Check the root inode for sanity */
root_inode = le64_to_cpu(sblk->root_inode);
if (SQUASHFS_INODE_OFFSET(root_inode) > SQUASHFS_METADATA_SIZE)
goto insanity;
msblk->inode_table = le64_to_cpu(sblk->inode_table_start);
msblk->directory_table = le64_to_cpu(sblk->directory_table_start);
msblk->inodes = le32_to_cpu(sblk->inodes);
msblk->fragments = le32_to_cpu(sblk->fragments);
msblk->ids = le16_to_cpu(sblk->no_ids);
flags = le16_to_cpu(sblk->flags);
TRACE("Found valid superblock on %pg\n", sb->s_bdev);
TRACE("Inodes are %scompressed\n", SQUASHFS_UNCOMPRESSED_INODES(flags)
? "un" : "");
TRACE("Data is %scompressed\n", SQUASHFS_UNCOMPRESSED_DATA(flags)
? "un" : "");
TRACE("Filesystem size %lld bytes\n", msblk->bytes_used);
TRACE("Block size %d\n", msblk->block_size);
TRACE("Number of inodes %d\n", msblk->inodes);
TRACE("Number of fragments %d\n", msblk->fragments);
TRACE("Number of ids %d\n", msblk->ids);
TRACE("sblk->inode_table_start %llx\n", msblk->inode_table);
TRACE("sblk->directory_table_start %llx\n", msblk->directory_table);
TRACE("sblk->fragment_table_start %llx\n",
(u64) le64_to_cpu(sblk->fragment_table_start));
TRACE("sblk->id_table_start %llx\n",
(u64) le64_to_cpu(sblk->id_table_start));
sb->s_maxbytes = MAX_LFS_FILESIZE;
sb->s_time_min = 0;
sb->s_time_max = U32_MAX;
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
sb->s_flags |= SB_RDONLY;
sb->s_op = &squashfs_super_ops;
err = -ENOMEM;
msblk->block_cache = squashfs_cache_init("metadata",
SQUASHFS_CACHED_BLKS, SQUASHFS_METADATA_SIZE);
if (msblk->block_cache == NULL)
goto failed_mount;
/* Allocate read_page block */
msblk->read_page = squashfs_cache_init("data",
msblk->max_thread_num, msblk->block_size);
if (msblk->read_page == NULL) {
errorf(fc, "Failed to allocate read_page block");
goto failed_mount;
}
squashfs: cache partial compressed blocks Before commit 93e72b3c612adcaca1 ("squashfs: migrate from ll_rw_block usage to BIO"), compressed blocks read by squashfs were cached in the page cache, but that is not the case after that commit. That has lead to squashfs having to re-read a lot of sectors from disk/flash. For example, the first sectors of every metadata block need to be read twice from the disk. Once partially to read the length, and a second time to read the block itself. Also, in linear reads of large files, the last sectors of one data block are re-read from disk when reading the next data block, since the compressed blocks are of variable sizes and not aligned to device blocks. This extra I/O results in a degrade in read performance of, for example, ~16% in one scenario on my ARM platform using squashfs with dm-verity and NAND. Since the decompressed data is cached in the page cache or squashfs' internal metadata and fragment caches, caching _all_ compressed pages would lead to a lot of double caching and is undesirable. But make the code cache any disk blocks which were only partially requested, since these are the ones likely to include data which is needed by other file system blocks. This restores read performance in my test scenario. The compressed block caching is only applied when the disk block size is equal to the page size, to avoid having to deal with caching sub-page reads. [akpm@linux-foundation.org: fs/squashfs/block.c needs linux/pagemap.h] [vincent.whitchurch@axis.com: fix page update race] Link: https://lkml.kernel.org/r/20230526-squashfs-cache-fixup-v1-1-d54a7fa23e7b@axis.com [vincent.whitchurch@axis.com: fix page indices] Link: https://lkml.kernel.org/r/20230526-squashfs-cache-fixup-v1-2-d54a7fa23e7b@axis.com [akpm@linux-foundation.org: fix layout, per hch] Link: https://lkml.kernel.org/r/20230510-squashfs-cache-v4-1-3bd394e1ee71@axis.com Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-17 14:18:19 +00:00
if (msblk->devblksize == PAGE_SIZE) {
struct inode *cache = new_inode(sb);
if (cache == NULL)
goto failed_mount;
set_nlink(cache, 1);
cache->i_size = OFFSET_MAX;
mapping_set_gfp_mask(cache->i_mapping, GFP_NOFS);
msblk->cache_mapping = cache->i_mapping;
}
msblk->stream = squashfs_decompressor_setup(sb, flags);
if (IS_ERR(msblk->stream)) {
err = PTR_ERR(msblk->stream);
msblk->stream = NULL;
goto insanity;
}
/* Handle xattrs */
sb->s_xattr = squashfs_xattr_handlers;
xattr_id_table_start = le64_to_cpu(sblk->xattr_id_table_start);
if (xattr_id_table_start == SQUASHFS_INVALID_BLK) {
next_table = msblk->bytes_used;
goto allocate_id_index_table;
}
/* Allocate and read xattr id lookup table */
msblk->xattr_id_table = squashfs_read_xattr_id_table(sb,
xattr_id_table_start, &msblk->xattr_table, &msblk->xattr_ids);
if (IS_ERR(msblk->xattr_id_table)) {
errorf(fc, "unable to read xattr id index table");
err = PTR_ERR(msblk->xattr_id_table);
msblk->xattr_id_table = NULL;
if (err != -ENOTSUPP)
goto failed_mount;
}
next_table = msblk->xattr_table;
allocate_id_index_table:
/* Allocate and read id index table */
msblk->id_table = squashfs_read_id_index_table(sb,
le64_to_cpu(sblk->id_table_start), next_table, msblk->ids);
if (IS_ERR(msblk->id_table)) {
errorf(fc, "unable to read id index table");
err = PTR_ERR(msblk->id_table);
msblk->id_table = NULL;
goto failed_mount;
}
next_table = le64_to_cpu(msblk->id_table[0]);
/* Handle inode lookup table */
lookup_table_start = le64_to_cpu(sblk->lookup_table_start);
if (lookup_table_start == SQUASHFS_INVALID_BLK)
goto handle_fragments;
/* Allocate and read inode lookup table */
msblk->inode_lookup_table = squashfs_read_inode_lookup_table(sb,
lookup_table_start, next_table, msblk->inodes);
if (IS_ERR(msblk->inode_lookup_table)) {
errorf(fc, "unable to read inode lookup table");
err = PTR_ERR(msblk->inode_lookup_table);
msblk->inode_lookup_table = NULL;
goto failed_mount;
}
next_table = le64_to_cpu(msblk->inode_lookup_table[0]);
sb->s_export_op = &squashfs_export_ops;
handle_fragments:
fragments = msblk->fragments;
if (fragments == 0)
goto check_directory_table;
msblk->fragment_cache = squashfs_cache_init("fragment",
SQUASHFS_CACHED_FRAGMENTS, msblk->block_size);
if (msblk->fragment_cache == NULL) {
err = -ENOMEM;
goto failed_mount;
}
/* Allocate and read fragment index table */
msblk->fragment_index = squashfs_read_fragment_index_table(sb,
le64_to_cpu(sblk->fragment_table_start), next_table, fragments);
if (IS_ERR(msblk->fragment_index)) {
errorf(fc, "unable to read fragment index table");
err = PTR_ERR(msblk->fragment_index);
msblk->fragment_index = NULL;
goto failed_mount;
}
next_table = le64_to_cpu(msblk->fragment_index[0]);
check_directory_table:
/* Sanity check directory_table */
if (msblk->directory_table > next_table) {
err = -EINVAL;
goto insanity;
}
/* Sanity check inode_table */
if (msblk->inode_table >= msblk->directory_table) {
err = -EINVAL;
goto insanity;
}
/* allocate root */
root = new_inode(sb);
if (!root) {
err = -ENOMEM;
goto failed_mount;
}
err = squashfs_read_inode(root, root_inode);
if (err) {
make_bad_inode(root);
iput(root);
goto failed_mount;
}
insert_inode_hash(root);
sb->s_root = d_make_root(root);
if (sb->s_root == NULL) {
ERROR("Root inode create failed\n");
err = -ENOMEM;
goto failed_mount;
}
TRACE("Leaving squashfs_fill_super\n");
kfree(sblk);
return 0;
insanity:
errorf(fc, "squashfs image failed sanity check");
failed_mount:
squashfs_cache_delete(msblk->block_cache);
squashfs_cache_delete(msblk->fragment_cache);
squashfs_cache_delete(msblk->read_page);
squashfs: cache partial compressed blocks Before commit 93e72b3c612adcaca1 ("squashfs: migrate from ll_rw_block usage to BIO"), compressed blocks read by squashfs were cached in the page cache, but that is not the case after that commit. That has lead to squashfs having to re-read a lot of sectors from disk/flash. For example, the first sectors of every metadata block need to be read twice from the disk. Once partially to read the length, and a second time to read the block itself. Also, in linear reads of large files, the last sectors of one data block are re-read from disk when reading the next data block, since the compressed blocks are of variable sizes and not aligned to device blocks. This extra I/O results in a degrade in read performance of, for example, ~16% in one scenario on my ARM platform using squashfs with dm-verity and NAND. Since the decompressed data is cached in the page cache or squashfs' internal metadata and fragment caches, caching _all_ compressed pages would lead to a lot of double caching and is undesirable. But make the code cache any disk blocks which were only partially requested, since these are the ones likely to include data which is needed by other file system blocks. This restores read performance in my test scenario. The compressed block caching is only applied when the disk block size is equal to the page size, to avoid having to deal with caching sub-page reads. [akpm@linux-foundation.org: fs/squashfs/block.c needs linux/pagemap.h] [vincent.whitchurch@axis.com: fix page update race] Link: https://lkml.kernel.org/r/20230526-squashfs-cache-fixup-v1-1-d54a7fa23e7b@axis.com [vincent.whitchurch@axis.com: fix page indices] Link: https://lkml.kernel.org/r/20230526-squashfs-cache-fixup-v1-2-d54a7fa23e7b@axis.com [akpm@linux-foundation.org: fix layout, per hch] Link: https://lkml.kernel.org/r/20230510-squashfs-cache-v4-1-3bd394e1ee71@axis.com Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-17 14:18:19 +00:00
if (msblk->cache_mapping)
iput(msblk->cache_mapping->host);
squashfs: add the mount parameter theads=<single|multi|percpu> Patch series 'squashfs: Add the mount parameter "threads="'. Currently, Squashfs supports multiple decompressor parallel modes. However, this mode can be configured only during kernel building and does not support flexible selection during runtime. In the current patch set, the mount parameter "threads=" is added to allow users to select the parallel decompressor mode and configure the number of decompressors when mounting a file system. "threads=<single|multi|percpu|1|2|3|...>" The upper limit is num_online_cpus() * 2. This patch (of 2): Squashfs supports three decompression concurrency modes: Single-thread mode: concurrent reads are blocked and the memory overhead is small. Multi-thread mode/percpu mode: reduces concurrent read blocking but increases memory overhead. The corresponding schema must be fixed at compile time. During mounting, the concurrent decompression mode cannot be adjusted based on file read blocking. The mount parameter theads=<single|multi|percpu> is added to select the concurrent decompression mode of a single SquashFS file system image. Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Jianguo Chen <chenjianguo3@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-19 03:09:29 +00:00
msblk->thread_ops->destroy(msblk);
kfree(msblk->inode_lookup_table);
kfree(msblk->fragment_index);
kfree(msblk->id_table);
kfree(msblk->xattr_id_table);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
kfree(sblk);
return err;
}
static int squashfs_get_tree(struct fs_context *fc)
{
return get_tree_bdev(fc, squashfs_fill_super);
}
static int squashfs_reconfigure(struct fs_context *fc)
{
struct super_block *sb = fc->root->d_sb;
struct squashfs_sb_info *msblk = sb->s_fs_info;
struct squashfs_mount_opts *opts = fc->fs_private;
sync_filesystem(fc->root->d_sb);
fc->sb_flags |= SB_RDONLY;
msblk->panic_on_errors = (opts->errors == Opt_errors_panic);
return 0;
}
static void squashfs_free_fs_context(struct fs_context *fc)
{
kfree(fc->fs_private);
}
static const struct fs_context_operations squashfs_context_ops = {
.get_tree = squashfs_get_tree,
.free = squashfs_free_fs_context,
.parse_param = squashfs_parse_param,
.reconfigure = squashfs_reconfigure,
};
static int squashfs_show_options(struct seq_file *s, struct dentry *root)
{
struct super_block *sb = root->d_sb;
struct squashfs_sb_info *msblk = sb->s_fs_info;
if (msblk->panic_on_errors)
seq_puts(s, ",errors=panic");
else
seq_puts(s, ",errors=continue");
squashfs: add the mount parameter theads=<single|multi|percpu> Patch series 'squashfs: Add the mount parameter "threads="'. Currently, Squashfs supports multiple decompressor parallel modes. However, this mode can be configured only during kernel building and does not support flexible selection during runtime. In the current patch set, the mount parameter "threads=" is added to allow users to select the parallel decompressor mode and configure the number of decompressors when mounting a file system. "threads=<single|multi|percpu|1|2|3|...>" The upper limit is num_online_cpus() * 2. This patch (of 2): Squashfs supports three decompression concurrency modes: Single-thread mode: concurrent reads are blocked and the memory overhead is small. Multi-thread mode/percpu mode: reduces concurrent read blocking but increases memory overhead. The corresponding schema must be fixed at compile time. During mounting, the concurrent decompression mode cannot be adjusted based on file read blocking. The mount parameter theads=<single|multi|percpu> is added to select the concurrent decompression mode of a single SquashFS file system image. Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Jianguo Chen <chenjianguo3@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-19 03:09:29 +00:00
#ifdef CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT
if (msblk->thread_ops == &squashfs_decompressor_single) {
seq_puts(s, ",threads=single");
return 0;
}
if (msblk->thread_ops == &squashfs_decompressor_percpu) {
seq_puts(s, ",threads=percpu");
return 0;
}
#endif
#ifdef CONFIG_SQUASHFS_MOUNT_DECOMP_THREADS
seq_printf(s, ",threads=%d", msblk->max_thread_num);
squashfs: add the mount parameter theads=<single|multi|percpu> Patch series 'squashfs: Add the mount parameter "threads="'. Currently, Squashfs supports multiple decompressor parallel modes. However, this mode can be configured only during kernel building and does not support flexible selection during runtime. In the current patch set, the mount parameter "threads=" is added to allow users to select the parallel decompressor mode and configure the number of decompressors when mounting a file system. "threads=<single|multi|percpu|1|2|3|...>" The upper limit is num_online_cpus() * 2. This patch (of 2): Squashfs supports three decompression concurrency modes: Single-thread mode: concurrent reads are blocked and the memory overhead is small. Multi-thread mode/percpu mode: reduces concurrent read blocking but increases memory overhead. The corresponding schema must be fixed at compile time. During mounting, the concurrent decompression mode cannot be adjusted based on file read blocking. The mount parameter theads=<single|multi|percpu> is added to select the concurrent decompression mode of a single SquashFS file system image. Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Jianguo Chen <chenjianguo3@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-19 03:09:29 +00:00
#endif
return 0;
}
static int squashfs_init_fs_context(struct fs_context *fc)
{
struct squashfs_mount_opts *opts;
opts = kzalloc(sizeof(*opts), GFP_KERNEL);
if (!opts)
return -ENOMEM;
squashfs: add the mount parameter theads=<single|multi|percpu> Patch series 'squashfs: Add the mount parameter "threads="'. Currently, Squashfs supports multiple decompressor parallel modes. However, this mode can be configured only during kernel building and does not support flexible selection during runtime. In the current patch set, the mount parameter "threads=" is added to allow users to select the parallel decompressor mode and configure the number of decompressors when mounting a file system. "threads=<single|multi|percpu|1|2|3|...>" The upper limit is num_online_cpus() * 2. This patch (of 2): Squashfs supports three decompression concurrency modes: Single-thread mode: concurrent reads are blocked and the memory overhead is small. Multi-thread mode/percpu mode: reduces concurrent read blocking but increases memory overhead. The corresponding schema must be fixed at compile time. During mounting, the concurrent decompression mode cannot be adjusted based on file read blocking. The mount parameter theads=<single|multi|percpu> is added to select the concurrent decompression mode of a single SquashFS file system image. Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Jianguo Chen <chenjianguo3@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-19 03:09:29 +00:00
#ifdef CONFIG_SQUASHFS_DECOMP_SINGLE
opts->thread_ops = &squashfs_decompressor_single;
#elif defined(CONFIG_SQUASHFS_DECOMP_MULTI)
opts->thread_ops = &squashfs_decompressor_multi;
#elif defined(CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU)
opts->thread_ops = &squashfs_decompressor_percpu;
#else
#error "fail: unknown squashfs decompression thread mode?"
#endif
opts->thread_num = 0;
fc->fs_private = opts;
fc->ops = &squashfs_context_ops;
return 0;
}
static int squashfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct squashfs_sb_info *msblk = dentry->d_sb->s_fs_info;
u64 id = huge_encode_dev(dentry->d_sb->s_bdev->bd_dev);
TRACE("Entered squashfs_statfs\n");
buf->f_type = SQUASHFS_MAGIC;
buf->f_bsize = msblk->block_size;
buf->f_blocks = ((msblk->bytes_used - 1) >> msblk->block_log) + 1;
buf->f_bfree = buf->f_bavail = 0;
buf->f_files = msblk->inodes;
buf->f_ffree = 0;
buf->f_namelen = SQUASHFS_NAME_LEN;
buf->f_fsid = u64_to_fsid(id);
return 0;
}
static void squashfs_put_super(struct super_block *sb)
{
if (sb->s_fs_info) {
struct squashfs_sb_info *sbi = sb->s_fs_info;
squashfs_cache_delete(sbi->block_cache);
squashfs_cache_delete(sbi->fragment_cache);
squashfs_cache_delete(sbi->read_page);
squashfs: cache partial compressed blocks Before commit 93e72b3c612adcaca1 ("squashfs: migrate from ll_rw_block usage to BIO"), compressed blocks read by squashfs were cached in the page cache, but that is not the case after that commit. That has lead to squashfs having to re-read a lot of sectors from disk/flash. For example, the first sectors of every metadata block need to be read twice from the disk. Once partially to read the length, and a second time to read the block itself. Also, in linear reads of large files, the last sectors of one data block are re-read from disk when reading the next data block, since the compressed blocks are of variable sizes and not aligned to device blocks. This extra I/O results in a degrade in read performance of, for example, ~16% in one scenario on my ARM platform using squashfs with dm-verity and NAND. Since the decompressed data is cached in the page cache or squashfs' internal metadata and fragment caches, caching _all_ compressed pages would lead to a lot of double caching and is undesirable. But make the code cache any disk blocks which were only partially requested, since these are the ones likely to include data which is needed by other file system blocks. This restores read performance in my test scenario. The compressed block caching is only applied when the disk block size is equal to the page size, to avoid having to deal with caching sub-page reads. [akpm@linux-foundation.org: fs/squashfs/block.c needs linux/pagemap.h] [vincent.whitchurch@axis.com: fix page update race] Link: https://lkml.kernel.org/r/20230526-squashfs-cache-fixup-v1-1-d54a7fa23e7b@axis.com [vincent.whitchurch@axis.com: fix page indices] Link: https://lkml.kernel.org/r/20230526-squashfs-cache-fixup-v1-2-d54a7fa23e7b@axis.com [akpm@linux-foundation.org: fix layout, per hch] Link: https://lkml.kernel.org/r/20230510-squashfs-cache-v4-1-3bd394e1ee71@axis.com Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-17 14:18:19 +00:00
if (sbi->cache_mapping)
iput(sbi->cache_mapping->host);
squashfs: add the mount parameter theads=<single|multi|percpu> Patch series 'squashfs: Add the mount parameter "threads="'. Currently, Squashfs supports multiple decompressor parallel modes. However, this mode can be configured only during kernel building and does not support flexible selection during runtime. In the current patch set, the mount parameter "threads=" is added to allow users to select the parallel decompressor mode and configure the number of decompressors when mounting a file system. "threads=<single|multi|percpu|1|2|3|...>" The upper limit is num_online_cpus() * 2. This patch (of 2): Squashfs supports three decompression concurrency modes: Single-thread mode: concurrent reads are blocked and the memory overhead is small. Multi-thread mode/percpu mode: reduces concurrent read blocking but increases memory overhead. The corresponding schema must be fixed at compile time. During mounting, the concurrent decompression mode cannot be adjusted based on file read blocking. The mount parameter theads=<single|multi|percpu> is added to select the concurrent decompression mode of a single SquashFS file system image. Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Jianguo Chen <chenjianguo3@huawei.com> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-19 03:09:29 +00:00
sbi->thread_ops->destroy(sbi);
kfree(sbi->id_table);
kfree(sbi->fragment_index);
kfree(sbi->meta_index);
kfree(sbi->inode_lookup_table);
kfree(sbi->xattr_id_table);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
}
}
static struct kmem_cache *squashfs_inode_cachep;
static void init_once(void *foo)
{
struct squashfs_inode_info *ei = foo;
inode_init_once(&ei->vfs_inode);
}
static int __init init_inodecache(void)
{
squashfs_inode_cachep = kmem_cache_create("squashfs_inode_cache",
sizeof(struct squashfs_inode_info), 0,
2016-01-14 23:18:21 +00:00
SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|SLAB_ACCOUNT,
init_once);
return squashfs_inode_cachep ? 0 : -ENOMEM;
}
static void destroy_inodecache(void)
{
/*
* Make sure all delayed rcu free inodes are flushed before we
* destroy cache.
*/
rcu_barrier();
kmem_cache_destroy(squashfs_inode_cachep);
}
static int __init init_squashfs_fs(void)
{
int err = init_inodecache();
if (err)
return err;
err = register_filesystem(&squashfs_fs_type);
if (err) {
destroy_inodecache();
return err;
}
pr_info("version 4.0 (2009/01/31) Phillip Lougher\n");
return 0;
}
static void __exit exit_squashfs_fs(void)
{
unregister_filesystem(&squashfs_fs_type);
destroy_inodecache();
}
static struct inode *squashfs_alloc_inode(struct super_block *sb)
{
struct squashfs_inode_info *ei =
alloc_inode_sb(sb, squashfs_inode_cachep, GFP_KERNEL);
return ei ? &ei->vfs_inode : NULL;
}
static void squashfs_free_inode(struct inode *inode)
{
kmem_cache_free(squashfs_inode_cachep, squashfs_i(inode));
}
static struct file_system_type squashfs_fs_type = {
.owner = THIS_MODULE,
.name = "squashfs",
.init_fs_context = squashfs_init_fs_context,
.parameters = squashfs_fs_parameters,
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV | FS_ALLOW_IDMAP,
};
MODULE_ALIAS_FS("squashfs");
static const struct super_operations squashfs_super_ops = {
.alloc_inode = squashfs_alloc_inode,
.free_inode = squashfs_free_inode,
.statfs = squashfs_statfs,
.put_super = squashfs_put_super,
.show_options = squashfs_show_options,
};
module_init(init_squashfs_fs);
module_exit(exit_squashfs_fs);
MODULE_DESCRIPTION("squashfs 4.0, a compressed read-only filesystem");
MODULE_AUTHOR("Phillip Lougher <phillip@squashfs.org.uk>");
MODULE_LICENSE("GPL");