dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
/*
|
|
|
|
* Copyright (C) 2019 Arrikto, Inc. All Rights Reserved.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/rwsem.h>
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/bitmap.h>
|
|
|
|
#include <linux/device-mapper.h>
|
|
|
|
|
|
|
|
#include "persistent-data/dm-bitset.h"
|
|
|
|
#include "persistent-data/dm-space-map.h"
|
|
|
|
#include "persistent-data/dm-block-manager.h"
|
|
|
|
#include "persistent-data/dm-transaction-manager.h"
|
|
|
|
|
|
|
|
#include "dm-clone-metadata.h"
|
|
|
|
|
|
|
|
#define DM_MSG_PREFIX "clone metadata"
|
|
|
|
|
|
|
|
#define SUPERBLOCK_LOCATION 0
|
|
|
|
#define SUPERBLOCK_MAGIC 0x8af27f64
|
|
|
|
#define SUPERBLOCK_CSUM_XOR 257649492
|
|
|
|
|
|
|
|
#define DM_CLONE_MAX_CONCURRENT_LOCKS 5
|
|
|
|
|
|
|
|
#define UUID_LEN 16
|
|
|
|
|
|
|
|
/* Min and max dm-clone metadata versions supported */
|
|
|
|
#define DM_CLONE_MIN_METADATA_VERSION 1
|
|
|
|
#define DM_CLONE_MAX_METADATA_VERSION 1
|
|
|
|
|
|
|
|
/*
|
|
|
|
* On-disk metadata layout
|
|
|
|
*/
|
|
|
|
struct superblock_disk {
|
|
|
|
__le32 csum;
|
|
|
|
__le32 flags;
|
|
|
|
__le64 blocknr;
|
|
|
|
|
|
|
|
__u8 uuid[UUID_LEN];
|
|
|
|
__le64 magic;
|
|
|
|
__le32 version;
|
|
|
|
|
|
|
|
__u8 metadata_space_map_root[SPACE_MAP_ROOT_SIZE];
|
|
|
|
|
|
|
|
__le64 region_size;
|
|
|
|
__le64 target_size;
|
|
|
|
|
|
|
|
__le64 bitset_root;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Region and Dirty bitmaps.
|
|
|
|
*
|
|
|
|
* dm-clone logically splits the source and destination devices in regions of
|
|
|
|
* fixed size. The destination device's regions are gradually hydrated, i.e.,
|
|
|
|
* we copy (clone) the source's regions to the destination device. Eventually,
|
|
|
|
* all regions will get hydrated and all I/O will be served from the
|
|
|
|
* destination device.
|
|
|
|
*
|
|
|
|
* We maintain an on-disk bitmap which tracks the state of each of the
|
|
|
|
* destination device's regions, i.e., whether they are hydrated or not.
|
|
|
|
*
|
|
|
|
* To save constantly doing look ups on disk we keep an in core copy of the
|
|
|
|
* on-disk bitmap, the region_map.
|
|
|
|
*
|
2019-12-04 14:06:52 +00:00
|
|
|
* In order to track which regions are hydrated during a metadata transaction,
|
|
|
|
* we use a second set of bitmaps, the dmap (dirty bitmap), which includes two
|
|
|
|
* bitmaps, namely dirty_regions and dirty_words. The dirty_regions bitmap
|
|
|
|
* tracks the regions that got hydrated during the current metadata
|
|
|
|
* transaction. The dirty_words bitmap tracks the dirty words, i.e. longs, of
|
|
|
|
* the dirty_regions bitmap.
|
|
|
|
*
|
|
|
|
* This allows us to precisely track the regions that were hydrated during the
|
|
|
|
* current metadata transaction and update the metadata accordingly, when we
|
|
|
|
* commit the current transaction. This is important because dm-clone should
|
|
|
|
* only commit the metadata of regions that were properly flushed to the
|
|
|
|
* destination device beforehand. Otherwise, in case of a crash, we could end
|
|
|
|
* up with a corrupted dm-clone device.
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
*
|
|
|
|
* When a region finishes hydrating dm-clone calls
|
|
|
|
* dm_clone_set_region_hydrated(), or for discard requests
|
|
|
|
* dm_clone_cond_set_range(), which sets the corresponding bits in region_map
|
|
|
|
* and dmap.
|
|
|
|
*
|
2019-12-04 14:06:52 +00:00
|
|
|
* During a metadata commit we scan dmap->dirty_words and dmap->dirty_regions
|
|
|
|
* and update the on-disk metadata accordingly. Thus, we don't have to flush to
|
|
|
|
* disk the whole region_map. We can just flush the dirty region_map bits.
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
*
|
2019-12-04 14:06:52 +00:00
|
|
|
* We use the helper dmap->dirty_words bitmap, which is smaller than the
|
|
|
|
* original region_map, to reduce the amount of memory accesses during a
|
|
|
|
* metadata commit. Moreover, as dm-bitset also accesses the on-disk bitmap in
|
|
|
|
* 64-bit word granularity, the dirty_words bitmap helps us avoid useless disk
|
|
|
|
* accesses.
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
*
|
|
|
|
* We could update directly the on-disk bitmap, when dm-clone calls either
|
|
|
|
* dm_clone_set_region_hydrated() or dm_clone_cond_set_range(), buts this
|
|
|
|
* inserts significant metadata I/O overhead in dm-clone's I/O path. Also, as
|
|
|
|
* these two functions don't block, we can call them in interrupt context,
|
|
|
|
* e.g., in a hooked overwrite bio's completion routine, and further reduce the
|
|
|
|
* I/O completion latency.
|
|
|
|
*
|
2019-12-04 14:06:52 +00:00
|
|
|
* We maintain two dirty bitmap sets. During a metadata commit we atomically
|
|
|
|
* swap the currently used dmap with the unused one. This allows the metadata
|
|
|
|
* update functions to run concurrently with an ongoing commit.
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
*/
|
|
|
|
struct dirty_map {
|
|
|
|
unsigned long *dirty_words;
|
2019-12-04 14:06:52 +00:00
|
|
|
unsigned long *dirty_regions;
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
unsigned int changed;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct dm_clone_metadata {
|
|
|
|
/* The metadata block device */
|
|
|
|
struct block_device *bdev;
|
|
|
|
|
|
|
|
sector_t target_size;
|
|
|
|
sector_t region_size;
|
|
|
|
unsigned long nr_regions;
|
|
|
|
unsigned long nr_words;
|
|
|
|
|
|
|
|
/* Spinlock protecting the region and dirty bitmaps. */
|
|
|
|
spinlock_t bitmap_lock;
|
|
|
|
struct dirty_map dmap[2];
|
|
|
|
struct dirty_map *current_dmap;
|
|
|
|
|
2019-12-04 14:06:53 +00:00
|
|
|
/* Protected by lock */
|
|
|
|
struct dirty_map *committing_dmap;
|
|
|
|
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
/*
|
|
|
|
* In core copy of the on-disk bitmap to save constantly doing look ups
|
|
|
|
* on disk.
|
|
|
|
*/
|
|
|
|
unsigned long *region_map;
|
|
|
|
|
|
|
|
/* Protected by bitmap_lock */
|
|
|
|
unsigned int read_only;
|
|
|
|
|
|
|
|
struct dm_block_manager *bm;
|
|
|
|
struct dm_space_map *sm;
|
|
|
|
struct dm_transaction_manager *tm;
|
|
|
|
|
|
|
|
struct rw_semaphore lock;
|
|
|
|
|
|
|
|
struct dm_disk_bitset bitset_info;
|
|
|
|
dm_block_t bitset_root;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Reading the space map root can fail, so we read it into this
|
|
|
|
* buffer before the superblock is locked and updated.
|
|
|
|
*/
|
|
|
|
__u8 metadata_space_map_root[SPACE_MAP_ROOT_SIZE];
|
|
|
|
|
|
|
|
bool hydration_done:1;
|
|
|
|
bool fail_io:1;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Superblock validation.
|
|
|
|
*/
|
|
|
|
static void sb_prepare_for_write(struct dm_block_validator *v,
|
|
|
|
struct dm_block *b, size_t sb_block_size)
|
|
|
|
{
|
|
|
|
struct superblock_disk *sb;
|
|
|
|
u32 csum;
|
|
|
|
|
|
|
|
sb = dm_block_data(b);
|
|
|
|
sb->blocknr = cpu_to_le64(dm_block_location(b));
|
|
|
|
|
|
|
|
csum = dm_bm_checksum(&sb->flags, sb_block_size - sizeof(__le32),
|
|
|
|
SUPERBLOCK_CSUM_XOR);
|
|
|
|
sb->csum = cpu_to_le32(csum);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sb_check(struct dm_block_validator *v, struct dm_block *b,
|
|
|
|
size_t sb_block_size)
|
|
|
|
{
|
|
|
|
struct superblock_disk *sb;
|
|
|
|
u32 csum, metadata_version;
|
|
|
|
|
|
|
|
sb = dm_block_data(b);
|
|
|
|
|
|
|
|
if (dm_block_location(b) != le64_to_cpu(sb->blocknr)) {
|
|
|
|
DMERR("Superblock check failed: blocknr %llu, expected %llu",
|
|
|
|
le64_to_cpu(sb->blocknr),
|
|
|
|
(unsigned long long)dm_block_location(b));
|
|
|
|
return -ENOTBLK;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (le64_to_cpu(sb->magic) != SUPERBLOCK_MAGIC) {
|
|
|
|
DMERR("Superblock check failed: magic %llu, expected %llu",
|
|
|
|
le64_to_cpu(sb->magic),
|
|
|
|
(unsigned long long)SUPERBLOCK_MAGIC);
|
|
|
|
return -EILSEQ;
|
|
|
|
}
|
|
|
|
|
|
|
|
csum = dm_bm_checksum(&sb->flags, sb_block_size - sizeof(__le32),
|
|
|
|
SUPERBLOCK_CSUM_XOR);
|
|
|
|
if (sb->csum != cpu_to_le32(csum)) {
|
|
|
|
DMERR("Superblock check failed: checksum %u, expected %u",
|
|
|
|
csum, le32_to_cpu(sb->csum));
|
|
|
|
return -EILSEQ;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Check metadata version */
|
|
|
|
metadata_version = le32_to_cpu(sb->version);
|
|
|
|
if (metadata_version < DM_CLONE_MIN_METADATA_VERSION ||
|
|
|
|
metadata_version > DM_CLONE_MAX_METADATA_VERSION) {
|
|
|
|
DMERR("Clone metadata version %u found, but only versions between %u and %u supported.",
|
|
|
|
metadata_version, DM_CLONE_MIN_METADATA_VERSION,
|
|
|
|
DM_CLONE_MAX_METADATA_VERSION);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct dm_block_validator sb_validator = {
|
|
|
|
.name = "superblock",
|
|
|
|
.prepare_for_write = sb_prepare_for_write,
|
|
|
|
.check = sb_check
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check if the superblock is formatted or not. We consider the superblock to
|
|
|
|
* be formatted in case we find non-zero bytes in it.
|
|
|
|
*/
|
|
|
|
static int __superblock_all_zeroes(struct dm_block_manager *bm, bool *formatted)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
unsigned int i, nr_words;
|
|
|
|
struct dm_block *sblock;
|
|
|
|
__le64 *data_le, zero = cpu_to_le64(0);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We don't use a validator here because the superblock could be all
|
|
|
|
* zeroes.
|
|
|
|
*/
|
|
|
|
r = dm_bm_read_lock(bm, SUPERBLOCK_LOCATION, NULL, &sblock);
|
|
|
|
if (r) {
|
|
|
|
DMERR("Failed to read_lock superblock");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
data_le = dm_block_data(sblock);
|
|
|
|
*formatted = false;
|
|
|
|
|
|
|
|
/* This assumes that the block size is a multiple of 8 bytes */
|
|
|
|
BUG_ON(dm_bm_block_size(bm) % sizeof(__le64));
|
|
|
|
nr_words = dm_bm_block_size(bm) / sizeof(__le64);
|
|
|
|
for (i = 0; i < nr_words; i++) {
|
|
|
|
if (data_le[i] != zero) {
|
|
|
|
*formatted = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
dm_bm_unlock(sblock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Low-level metadata handling.
|
|
|
|
*/
|
|
|
|
static inline int superblock_read_lock(struct dm_clone_metadata *cmd,
|
|
|
|
struct dm_block **sblock)
|
|
|
|
{
|
|
|
|
return dm_bm_read_lock(cmd->bm, SUPERBLOCK_LOCATION, &sb_validator, sblock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int superblock_write_lock_zero(struct dm_clone_metadata *cmd,
|
|
|
|
struct dm_block **sblock)
|
|
|
|
{
|
|
|
|
return dm_bm_write_lock_zero(cmd->bm, SUPERBLOCK_LOCATION, &sb_validator, sblock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __copy_sm_root(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
size_t root_size;
|
|
|
|
|
|
|
|
r = dm_sm_root_size(cmd->sm, &root_size);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
|
|
|
|
return dm_sm_copy_root(cmd->sm, &cmd->metadata_space_map_root, root_size);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Save dm-clone metadata in superblock */
|
|
|
|
static void __prepare_superblock(struct dm_clone_metadata *cmd,
|
|
|
|
struct superblock_disk *sb)
|
|
|
|
{
|
|
|
|
sb->flags = cpu_to_le32(0UL);
|
|
|
|
|
|
|
|
/* FIXME: UUID is currently unused */
|
|
|
|
memset(sb->uuid, 0, sizeof(sb->uuid));
|
|
|
|
|
|
|
|
sb->magic = cpu_to_le64(SUPERBLOCK_MAGIC);
|
|
|
|
sb->version = cpu_to_le32(DM_CLONE_MAX_METADATA_VERSION);
|
|
|
|
|
|
|
|
/* Save the metadata space_map root */
|
|
|
|
memcpy(&sb->metadata_space_map_root, &cmd->metadata_space_map_root,
|
|
|
|
sizeof(cmd->metadata_space_map_root));
|
|
|
|
|
|
|
|
sb->region_size = cpu_to_le64(cmd->region_size);
|
|
|
|
sb->target_size = cpu_to_le64(cmd->target_size);
|
|
|
|
sb->bitset_root = cpu_to_le64(cmd->bitset_root);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __open_metadata(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
struct dm_block *sblock;
|
|
|
|
struct superblock_disk *sb;
|
|
|
|
|
|
|
|
r = superblock_read_lock(cmd, &sblock);
|
|
|
|
|
|
|
|
if (r) {
|
|
|
|
DMERR("Failed to read_lock superblock");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
sb = dm_block_data(sblock);
|
|
|
|
|
|
|
|
/* Verify that target_size and region_size haven't changed. */
|
|
|
|
if (cmd->region_size != le64_to_cpu(sb->region_size) ||
|
|
|
|
cmd->target_size != le64_to_cpu(sb->target_size)) {
|
|
|
|
DMERR("Region and/or target size don't match the ones in metadata");
|
|
|
|
r = -EINVAL;
|
|
|
|
goto out_with_lock;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = dm_tm_open_with_sm(cmd->bm, SUPERBLOCK_LOCATION,
|
|
|
|
sb->metadata_space_map_root,
|
|
|
|
sizeof(sb->metadata_space_map_root),
|
|
|
|
&cmd->tm, &cmd->sm);
|
|
|
|
|
|
|
|
if (r) {
|
|
|
|
DMERR("dm_tm_open_with_sm failed");
|
|
|
|
goto out_with_lock;
|
|
|
|
}
|
|
|
|
|
|
|
|
dm_disk_bitset_init(cmd->tm, &cmd->bitset_info);
|
|
|
|
cmd->bitset_root = le64_to_cpu(sb->bitset_root);
|
|
|
|
|
|
|
|
out_with_lock:
|
|
|
|
dm_bm_unlock(sblock);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __format_metadata(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
struct dm_block *sblock;
|
|
|
|
struct superblock_disk *sb;
|
|
|
|
|
|
|
|
r = dm_tm_create_with_sm(cmd->bm, SUPERBLOCK_LOCATION, &cmd->tm, &cmd->sm);
|
|
|
|
if (r) {
|
|
|
|
DMERR("Failed to create transaction manager");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
dm_disk_bitset_init(cmd->tm, &cmd->bitset_info);
|
|
|
|
|
|
|
|
r = dm_bitset_empty(&cmd->bitset_info, &cmd->bitset_root);
|
|
|
|
if (r) {
|
|
|
|
DMERR("Failed to create empty on-disk bitset");
|
|
|
|
goto err_with_tm;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = dm_bitset_resize(&cmd->bitset_info, cmd->bitset_root, 0,
|
|
|
|
cmd->nr_regions, false, &cmd->bitset_root);
|
|
|
|
if (r) {
|
|
|
|
DMERR("Failed to resize on-disk bitset to %lu entries", cmd->nr_regions);
|
|
|
|
goto err_with_tm;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Flush to disk all blocks, except the superblock */
|
|
|
|
r = dm_tm_pre_commit(cmd->tm);
|
|
|
|
if (r) {
|
|
|
|
DMERR("dm_tm_pre_commit failed");
|
|
|
|
goto err_with_tm;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = __copy_sm_root(cmd);
|
|
|
|
if (r) {
|
|
|
|
DMERR("__copy_sm_root failed");
|
|
|
|
goto err_with_tm;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = superblock_write_lock_zero(cmd, &sblock);
|
|
|
|
if (r) {
|
|
|
|
DMERR("Failed to write_lock superblock");
|
|
|
|
goto err_with_tm;
|
|
|
|
}
|
|
|
|
|
|
|
|
sb = dm_block_data(sblock);
|
|
|
|
__prepare_superblock(cmd, sb);
|
|
|
|
r = dm_tm_commit(cmd->tm, sblock);
|
|
|
|
if (r) {
|
|
|
|
DMERR("Failed to commit superblock");
|
|
|
|
goto err_with_tm;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_with_tm:
|
|
|
|
dm_sm_destroy(cmd->sm);
|
|
|
|
dm_tm_destroy(cmd->tm);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __open_or_format_metadata(struct dm_clone_metadata *cmd, bool may_format_device)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
bool formatted = false;
|
|
|
|
|
|
|
|
r = __superblock_all_zeroes(cmd->bm, &formatted);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
|
|
|
|
if (!formatted)
|
|
|
|
return may_format_device ? __format_metadata(cmd) : -EPERM;
|
|
|
|
|
|
|
|
return __open_metadata(cmd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __create_persistent_data_structures(struct dm_clone_metadata *cmd,
|
|
|
|
bool may_format_device)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
|
|
|
|
/* Create block manager */
|
|
|
|
cmd->bm = dm_block_manager_create(cmd->bdev,
|
|
|
|
DM_CLONE_METADATA_BLOCK_SIZE << SECTOR_SHIFT,
|
|
|
|
DM_CLONE_MAX_CONCURRENT_LOCKS);
|
|
|
|
if (IS_ERR(cmd->bm)) {
|
|
|
|
DMERR("Failed to create block manager");
|
|
|
|
return PTR_ERR(cmd->bm);
|
|
|
|
}
|
|
|
|
|
|
|
|
r = __open_or_format_metadata(cmd, may_format_device);
|
|
|
|
if (r)
|
|
|
|
dm_block_manager_destroy(cmd->bm);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __destroy_persistent_data_structures(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
dm_sm_destroy(cmd->sm);
|
|
|
|
dm_tm_destroy(cmd->tm);
|
|
|
|
dm_block_manager_destroy(cmd->bm);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
static size_t bitmap_size(unsigned long nr_bits)
|
|
|
|
{
|
|
|
|
return BITS_TO_LONGS(nr_bits) * sizeof(long);
|
|
|
|
}
|
|
|
|
|
2019-12-04 14:06:52 +00:00
|
|
|
static int __dirty_map_init(struct dirty_map *dmap, unsigned long nr_words,
|
|
|
|
unsigned long nr_regions)
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
{
|
2019-12-04 14:06:52 +00:00
|
|
|
dmap->changed = 0;
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
2019-12-04 14:06:52 +00:00
|
|
|
dmap->dirty_words = kvzalloc(bitmap_size(nr_words), GFP_KERNEL);
|
|
|
|
if (!dmap->dirty_words)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
dmap->dirty_regions = kvzalloc(bitmap_size(nr_regions), GFP_KERNEL);
|
|
|
|
if (!dmap->dirty_regions) {
|
|
|
|
kvfree(dmap->dirty_words);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
2019-12-04 14:06:52 +00:00
|
|
|
return 0;
|
|
|
|
}
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
2019-12-04 14:06:52 +00:00
|
|
|
static void __dirty_map_exit(struct dirty_map *dmap)
|
|
|
|
{
|
|
|
|
kvfree(dmap->dirty_words);
|
|
|
|
kvfree(dmap->dirty_regions);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dirty_map_init(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
if (__dirty_map_init(&cmd->dmap[0], cmd->nr_words, cmd->nr_regions)) {
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
DMERR("Failed to allocate dirty bitmap");
|
2019-12-04 14:06:52 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (__dirty_map_init(&cmd->dmap[1], cmd->nr_words, cmd->nr_regions)) {
|
|
|
|
DMERR("Failed to allocate dirty bitmap");
|
|
|
|
__dirty_map_exit(&cmd->dmap[0]);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
cmd->current_dmap = &cmd->dmap[0];
|
2019-12-04 14:06:53 +00:00
|
|
|
cmd->committing_dmap = NULL;
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dirty_map_exit(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
2019-12-04 14:06:52 +00:00
|
|
|
__dirty_map_exit(&cmd->dmap[0]);
|
|
|
|
__dirty_map_exit(&cmd->dmap[1]);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int __load_bitset_in_core(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
unsigned long i;
|
|
|
|
struct dm_bitset_cursor c;
|
|
|
|
|
|
|
|
/* Flush bitset cache */
|
|
|
|
r = dm_bitset_flush(&cmd->bitset_info, cmd->bitset_root, &cmd->bitset_root);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
|
|
|
|
r = dm_bitset_cursor_begin(&cmd->bitset_info, cmd->bitset_root, cmd->nr_regions, &c);
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
|
|
|
|
for (i = 0; ; i++) {
|
|
|
|
if (dm_bitset_cursor_get_value(&c))
|
|
|
|
__set_bit(i, cmd->region_map);
|
|
|
|
else
|
|
|
|
__clear_bit(i, cmd->region_map);
|
|
|
|
|
|
|
|
if (i >= (cmd->nr_regions - 1))
|
|
|
|
break;
|
|
|
|
|
|
|
|
r = dm_bitset_cursor_next(&c);
|
|
|
|
|
|
|
|
if (r)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
dm_bitset_cursor_end(&c);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct dm_clone_metadata *dm_clone_metadata_open(struct block_device *bdev,
|
|
|
|
sector_t target_size,
|
|
|
|
sector_t region_size)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
struct dm_clone_metadata *cmd;
|
|
|
|
|
|
|
|
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
|
|
|
|
if (!cmd) {
|
|
|
|
DMERR("Failed to allocate memory for dm-clone metadata");
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
}
|
|
|
|
|
|
|
|
cmd->bdev = bdev;
|
|
|
|
cmd->target_size = target_size;
|
|
|
|
cmd->region_size = region_size;
|
|
|
|
cmd->nr_regions = dm_sector_div_up(cmd->target_size, cmd->region_size);
|
|
|
|
cmd->nr_words = BITS_TO_LONGS(cmd->nr_regions);
|
|
|
|
|
|
|
|
init_rwsem(&cmd->lock);
|
|
|
|
spin_lock_init(&cmd->bitmap_lock);
|
|
|
|
cmd->read_only = 0;
|
|
|
|
cmd->fail_io = false;
|
|
|
|
cmd->hydration_done = false;
|
|
|
|
|
|
|
|
cmd->region_map = kvmalloc(bitmap_size(cmd->nr_regions), GFP_KERNEL);
|
|
|
|
if (!cmd->region_map) {
|
|
|
|
DMERR("Failed to allocate memory for region bitmap");
|
|
|
|
r = -ENOMEM;
|
|
|
|
goto out_with_md;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = __create_persistent_data_structures(cmd, true);
|
|
|
|
if (r)
|
|
|
|
goto out_with_region_map;
|
|
|
|
|
|
|
|
r = __load_bitset_in_core(cmd);
|
|
|
|
if (r) {
|
|
|
|
DMERR("Failed to load on-disk region map");
|
|
|
|
goto out_with_pds;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = dirty_map_init(cmd);
|
|
|
|
if (r)
|
|
|
|
goto out_with_pds;
|
|
|
|
|
|
|
|
if (bitmap_full(cmd->region_map, cmd->nr_regions))
|
|
|
|
cmd->hydration_done = true;
|
|
|
|
|
|
|
|
return cmd;
|
|
|
|
|
|
|
|
out_with_pds:
|
|
|
|
__destroy_persistent_data_structures(cmd);
|
|
|
|
|
|
|
|
out_with_region_map:
|
|
|
|
kvfree(cmd->region_map);
|
|
|
|
|
|
|
|
out_with_md:
|
|
|
|
kfree(cmd);
|
|
|
|
|
|
|
|
return ERR_PTR(r);
|
|
|
|
}
|
|
|
|
|
|
|
|
void dm_clone_metadata_close(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
if (!cmd->fail_io)
|
|
|
|
__destroy_persistent_data_structures(cmd);
|
|
|
|
|
|
|
|
dirty_map_exit(cmd);
|
|
|
|
kvfree(cmd->region_map);
|
|
|
|
kfree(cmd);
|
|
|
|
}
|
|
|
|
|
|
|
|
bool dm_clone_is_hydration_done(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
return cmd->hydration_done;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool dm_clone_is_region_hydrated(struct dm_clone_metadata *cmd, unsigned long region_nr)
|
|
|
|
{
|
|
|
|
return dm_clone_is_hydration_done(cmd) || test_bit(region_nr, cmd->region_map);
|
|
|
|
}
|
|
|
|
|
|
|
|
bool dm_clone_is_range_hydrated(struct dm_clone_metadata *cmd,
|
|
|
|
unsigned long start, unsigned long nr_regions)
|
|
|
|
{
|
|
|
|
unsigned long bit;
|
|
|
|
|
|
|
|
if (dm_clone_is_hydration_done(cmd))
|
|
|
|
return true;
|
|
|
|
|
|
|
|
bit = find_next_zero_bit(cmd->region_map, cmd->nr_regions, start);
|
|
|
|
|
|
|
|
return (bit >= (start + nr_regions));
|
|
|
|
}
|
|
|
|
|
2020-03-27 14:01:11 +00:00
|
|
|
unsigned int dm_clone_nr_of_hydrated_regions(struct dm_clone_metadata *cmd)
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
{
|
|
|
|
return bitmap_weight(cmd->region_map, cmd->nr_regions);
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned long dm_clone_find_next_unhydrated_region(struct dm_clone_metadata *cmd,
|
|
|
|
unsigned long start)
|
|
|
|
{
|
|
|
|
return find_next_zero_bit(cmd->region_map, cmd->nr_regions, start);
|
|
|
|
}
|
|
|
|
|
2019-12-04 14:06:52 +00:00
|
|
|
static int __update_metadata_word(struct dm_clone_metadata *cmd,
|
|
|
|
unsigned long *dirty_regions,
|
|
|
|
unsigned long word)
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
{
|
|
|
|
int r;
|
|
|
|
unsigned long index = word * BITS_PER_LONG;
|
|
|
|
unsigned long max_index = min(cmd->nr_regions, (word + 1) * BITS_PER_LONG);
|
|
|
|
|
|
|
|
while (index < max_index) {
|
2019-12-04 14:06:52 +00:00
|
|
|
if (test_bit(index, dirty_regions)) {
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
r = dm_bitset_set_bit(&cmd->bitset_info, cmd->bitset_root,
|
|
|
|
index, &cmd->bitset_root);
|
|
|
|
if (r) {
|
|
|
|
DMERR("dm_bitset_set_bit failed");
|
|
|
|
return r;
|
|
|
|
}
|
2019-12-04 14:06:52 +00:00
|
|
|
__clear_bit(index, dirty_regions);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
}
|
|
|
|
index++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __metadata_commit(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
struct dm_block *sblock;
|
|
|
|
struct superblock_disk *sb;
|
|
|
|
|
|
|
|
/* Flush bitset cache */
|
|
|
|
r = dm_bitset_flush(&cmd->bitset_info, cmd->bitset_root, &cmd->bitset_root);
|
|
|
|
if (r) {
|
|
|
|
DMERR("dm_bitset_flush failed");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Flush to disk all blocks, except the superblock */
|
|
|
|
r = dm_tm_pre_commit(cmd->tm);
|
|
|
|
if (r) {
|
|
|
|
DMERR("dm_tm_pre_commit failed");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Save the space map root in cmd->metadata_space_map_root */
|
|
|
|
r = __copy_sm_root(cmd);
|
|
|
|
if (r) {
|
|
|
|
DMERR("__copy_sm_root failed");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Lock the superblock */
|
|
|
|
r = superblock_write_lock_zero(cmd, &sblock);
|
|
|
|
if (r) {
|
|
|
|
DMERR("Failed to write_lock superblock");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Save the metadata in superblock */
|
|
|
|
sb = dm_block_data(sblock);
|
|
|
|
__prepare_superblock(cmd, sb);
|
|
|
|
|
|
|
|
/* Unlock superblock and commit it to disk */
|
|
|
|
r = dm_tm_commit(cmd->tm, sblock);
|
|
|
|
if (r) {
|
|
|
|
DMERR("Failed to commit superblock");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* FIXME: Find a more efficient way to check if the hydration is done.
|
|
|
|
*/
|
|
|
|
if (bitmap_full(cmd->region_map, cmd->nr_regions))
|
|
|
|
cmd->hydration_done = true;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __flush_dmap(struct dm_clone_metadata *cmd, struct dirty_map *dmap)
|
|
|
|
{
|
|
|
|
int r;
|
2019-10-04 14:17:37 +00:00
|
|
|
unsigned long word;
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
|
|
|
word = 0;
|
|
|
|
do {
|
|
|
|
word = find_next_bit(dmap->dirty_words, cmd->nr_words, word);
|
|
|
|
|
|
|
|
if (word == cmd->nr_words)
|
|
|
|
break;
|
|
|
|
|
2019-12-04 14:06:52 +00:00
|
|
|
r = __update_metadata_word(cmd, dmap->dirty_regions, word);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
|
|
|
|
__clear_bit(word, dmap->dirty_words);
|
|
|
|
word++;
|
|
|
|
} while (word < cmd->nr_words);
|
|
|
|
|
|
|
|
r = __metadata_commit(cmd);
|
|
|
|
|
|
|
|
if (r)
|
|
|
|
return r;
|
|
|
|
|
|
|
|
/* Update the changed flag */
|
2019-10-04 14:17:37 +00:00
|
|
|
spin_lock_irq(&cmd->bitmap_lock);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
dmap->changed = 0;
|
2019-10-04 14:17:37 +00:00
|
|
|
spin_unlock_irq(&cmd->bitmap_lock);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-12-04 14:06:53 +00:00
|
|
|
int dm_clone_metadata_pre_commit(struct dm_clone_metadata *cmd)
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
{
|
2019-12-04 14:06:53 +00:00
|
|
|
int r = 0;
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
struct dirty_map *dmap, *next_dmap;
|
|
|
|
|
|
|
|
down_write(&cmd->lock);
|
|
|
|
|
2019-12-04 14:06:53 +00:00
|
|
|
if (cmd->fail_io || dm_bm_is_read_only(cmd->bm)) {
|
|
|
|
r = -EPERM;
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
goto out;
|
2019-12-04 14:06:53 +00:00
|
|
|
}
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
|
|
|
/* Get current dirty bitmap */
|
|
|
|
dmap = cmd->current_dmap;
|
|
|
|
|
|
|
|
/* Get next dirty bitmap */
|
|
|
|
next_dmap = (dmap == &cmd->dmap[0]) ? &cmd->dmap[1] : &cmd->dmap[0];
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The last commit failed, so we don't have a clean dirty-bitmap to
|
|
|
|
* use.
|
|
|
|
*/
|
2019-12-04 14:06:53 +00:00
|
|
|
if (WARN_ON(next_dmap->changed || cmd->committing_dmap)) {
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
r = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Swap dirty bitmaps */
|
2019-10-04 14:17:37 +00:00
|
|
|
spin_lock_irq(&cmd->bitmap_lock);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
cmd->current_dmap = next_dmap;
|
2019-10-04 14:17:37 +00:00
|
|
|
spin_unlock_irq(&cmd->bitmap_lock);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
2019-12-04 14:06:53 +00:00
|
|
|
/* Set old dirty bitmap as currently committing */
|
|
|
|
cmd->committing_dmap = dmap;
|
|
|
|
out:
|
|
|
|
up_write(&cmd->lock);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
int dm_clone_metadata_commit(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
int r = -EPERM;
|
|
|
|
|
|
|
|
down_write(&cmd->lock);
|
|
|
|
|
|
|
|
if (cmd->fail_io || dm_bm_is_read_only(cmd->bm))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (WARN_ON(!cmd->committing_dmap)) {
|
|
|
|
r = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = __flush_dmap(cmd, cmd->committing_dmap);
|
|
|
|
if (!r) {
|
|
|
|
/* Clear committing dmap */
|
|
|
|
cmd->committing_dmap = NULL;
|
|
|
|
}
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
out:
|
|
|
|
up_write(&cmd->lock);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
int dm_clone_set_region_hydrated(struct dm_clone_metadata *cmd, unsigned long region_nr)
|
|
|
|
{
|
|
|
|
int r = 0;
|
|
|
|
struct dirty_map *dmap;
|
|
|
|
unsigned long word, flags;
|
|
|
|
|
dm clone: Fix handling of partial region discards
There is a bug in the way dm-clone handles discards, which can lead to
discarding the wrong blocks or trying to discard blocks beyond the end
of the device.
This could lead to data corruption, if the destination device indeed
discards the underlying blocks, i.e., if the discard operation results
in the original contents of a block to be lost.
The root of the problem is the code that calculates the range of regions
covered by a discard request and decides which regions to discard.
Since dm-clone handles the device in units of regions, we don't discard
parts of a region, only whole regions.
The range is calculated as:
rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size);
re = bio_end_sector(bio) >> clone->region_shift;
, where 'rs' is the first region to discard and (re - rs) is the number
of regions to discard.
The bug manifests when we try to discard part of a single region, i.e.,
when we try to discard a block with size < region_size, and the discard
request both starts at an offset with respect to the beginning of that
region and ends before the end of the region.
The root cause is the following comparison:
if (rs == re)
// skip discard and complete original bio immediately
, which doesn't take into account that 'rs' might be greater than 're'.
Thus, we then issue a discard request for the wrong blocks, instead of
skipping the discard all together.
Fix the check to also take into account the above case, so we don't end
up discarding the wrong blocks.
Also, add some range checks to dm_clone_set_region_hydrated() and
dm_clone_cond_set_range(), which update dm-clone's region bitmap.
Note that the aforementioned bug doesn't cause invalid memory accesses,
because dm_clone_is_range_hydrated() returns True for this case, so the
checks are just precautionary.
Fixes: 7431b7835f55 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
|
|
|
if (unlikely(region_nr >= cmd->nr_regions)) {
|
|
|
|
DMERR("Region %lu out of range (total number of regions %lu)",
|
|
|
|
region_nr, cmd->nr_regions);
|
|
|
|
return -ERANGE;
|
|
|
|
}
|
|
|
|
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
word = region_nr / BITS_PER_LONG;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&cmd->bitmap_lock, flags);
|
|
|
|
|
|
|
|
if (cmd->read_only) {
|
|
|
|
r = -EPERM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
dmap = cmd->current_dmap;
|
|
|
|
|
|
|
|
__set_bit(word, dmap->dirty_words);
|
2019-12-04 14:06:52 +00:00
|
|
|
__set_bit(region_nr, dmap->dirty_regions);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
__set_bit(region_nr, cmd->region_map);
|
|
|
|
dmap->changed = 1;
|
|
|
|
|
|
|
|
out:
|
|
|
|
spin_unlock_irqrestore(&cmd->bitmap_lock, flags);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
int dm_clone_cond_set_range(struct dm_clone_metadata *cmd, unsigned long start,
|
|
|
|
unsigned long nr_regions)
|
|
|
|
{
|
|
|
|
int r = 0;
|
|
|
|
struct dirty_map *dmap;
|
2019-10-04 14:17:37 +00:00
|
|
|
unsigned long word, region_nr;
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
dm clone: Fix handling of partial region discards
There is a bug in the way dm-clone handles discards, which can lead to
discarding the wrong blocks or trying to discard blocks beyond the end
of the device.
This could lead to data corruption, if the destination device indeed
discards the underlying blocks, i.e., if the discard operation results
in the original contents of a block to be lost.
The root of the problem is the code that calculates the range of regions
covered by a discard request and decides which regions to discard.
Since dm-clone handles the device in units of regions, we don't discard
parts of a region, only whole regions.
The range is calculated as:
rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size);
re = bio_end_sector(bio) >> clone->region_shift;
, where 'rs' is the first region to discard and (re - rs) is the number
of regions to discard.
The bug manifests when we try to discard part of a single region, i.e.,
when we try to discard a block with size < region_size, and the discard
request both starts at an offset with respect to the beginning of that
region and ends before the end of the region.
The root cause is the following comparison:
if (rs == re)
// skip discard and complete original bio immediately
, which doesn't take into account that 'rs' might be greater than 're'.
Thus, we then issue a discard request for the wrong blocks, instead of
skipping the discard all together.
Fix the check to also take into account the above case, so we don't end
up discarding the wrong blocks.
Also, add some range checks to dm_clone_set_region_hydrated() and
dm_clone_cond_set_range(), which update dm-clone's region bitmap.
Note that the aforementioned bug doesn't cause invalid memory accesses,
because dm_clone_is_range_hydrated() returns True for this case, so the
checks are just precautionary.
Fixes: 7431b7835f55 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
|
|
|
if (unlikely(start >= cmd->nr_regions || (start + nr_regions) < start ||
|
|
|
|
(start + nr_regions) > cmd->nr_regions)) {
|
|
|
|
DMERR("Invalid region range: start %lu, nr_regions %lu (total number of regions %lu)",
|
|
|
|
start, nr_regions, cmd->nr_regions);
|
|
|
|
return -ERANGE;
|
|
|
|
}
|
|
|
|
|
2019-10-04 14:17:37 +00:00
|
|
|
spin_lock_irq(&cmd->bitmap_lock);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
|
|
|
if (cmd->read_only) {
|
|
|
|
r = -EPERM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
dmap = cmd->current_dmap;
|
|
|
|
for (region_nr = start; region_nr < (start + nr_regions); region_nr++) {
|
|
|
|
if (!test_bit(region_nr, cmd->region_map)) {
|
|
|
|
word = region_nr / BITS_PER_LONG;
|
|
|
|
__set_bit(word, dmap->dirty_words);
|
2019-12-04 14:06:52 +00:00
|
|
|
__set_bit(region_nr, dmap->dirty_regions);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
__set_bit(region_nr, cmd->region_map);
|
|
|
|
dmap->changed = 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
out:
|
2019-10-04 14:17:37 +00:00
|
|
|
spin_unlock_irq(&cmd->bitmap_lock);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* WARNING: This must not be called concurrently with either
|
|
|
|
* dm_clone_set_region_hydrated() or dm_clone_cond_set_range(), as it changes
|
|
|
|
* cmd->region_map without taking the cmd->bitmap_lock spinlock. The only
|
|
|
|
* exception is after setting the metadata to read-only mode, using
|
|
|
|
* dm_clone_metadata_set_read_only().
|
|
|
|
*
|
|
|
|
* We don't take the spinlock because __load_bitset_in_core() does I/O, so it
|
|
|
|
* may block.
|
|
|
|
*/
|
|
|
|
int dm_clone_reload_in_core_bitset(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
int r = -EINVAL;
|
|
|
|
|
|
|
|
down_write(&cmd->lock);
|
|
|
|
|
|
|
|
if (cmd->fail_io)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
r = __load_bitset_in_core(cmd);
|
|
|
|
out:
|
|
|
|
up_write(&cmd->lock);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool dm_clone_changed_this_transaction(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
bool r;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&cmd->bitmap_lock, flags);
|
|
|
|
r = cmd->dmap[0].changed || cmd->dmap[1].changed;
|
|
|
|
spin_unlock_irqrestore(&cmd->bitmap_lock, flags);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
int dm_clone_metadata_abort(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
int r = -EPERM;
|
|
|
|
|
|
|
|
down_write(&cmd->lock);
|
|
|
|
|
|
|
|
if (cmd->fail_io || dm_bm_is_read_only(cmd->bm))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
__destroy_persistent_data_structures(cmd);
|
|
|
|
|
|
|
|
r = __create_persistent_data_structures(cmd, false);
|
|
|
|
if (r) {
|
|
|
|
/* If something went wrong we can neither write nor read the metadata */
|
|
|
|
cmd->fail_io = true;
|
|
|
|
}
|
|
|
|
out:
|
|
|
|
up_write(&cmd->lock);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
void dm_clone_metadata_set_read_only(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
down_write(&cmd->lock);
|
|
|
|
|
2019-10-04 14:17:37 +00:00
|
|
|
spin_lock_irq(&cmd->bitmap_lock);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
cmd->read_only = 1;
|
2019-10-04 14:17:37 +00:00
|
|
|
spin_unlock_irq(&cmd->bitmap_lock);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
|
|
|
if (!cmd->fail_io)
|
|
|
|
dm_bm_set_read_only(cmd->bm);
|
|
|
|
|
|
|
|
up_write(&cmd->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
void dm_clone_metadata_set_read_write(struct dm_clone_metadata *cmd)
|
|
|
|
{
|
|
|
|
down_write(&cmd->lock);
|
|
|
|
|
2019-10-04 14:17:37 +00:00
|
|
|
spin_lock_irq(&cmd->bitmap_lock);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
cmd->read_only = 0;
|
2019-10-04 14:17:37 +00:00
|
|
|
spin_unlock_irq(&cmd->bitmap_lock);
|
dm: add clone target
Add the dm-clone target, which allows cloning of arbitrary block
devices.
dm-clone produces a one-to-one copy of an existing, read-only source
device into a writable destination device: It presents a virtual block
device which makes all data appear immediately, and redirects reads and
writes accordingly.
The main use case of dm-clone is to clone a potentially remote,
high-latency, read-only, archival-type block device into a writable,
fast, primary-type device for fast, low-latency I/O. The cloned device
is visible/mountable immediately and the copy of the source device to
the destination device happens in the background, in parallel with user
I/O.
When the cloning completes, the dm-clone table can be removed altogether
and be replaced, e.g., by a linear table, mapping directly to the
destination device.
For further information and examples of how to use dm-clone, please read
Documentation/admin-guide/device-mapper/dm-clone.rst
Suggested-by: Vangelis Koukis <vkoukis@arrikto.com>
Co-developed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-11 14:36:40 +00:00
|
|
|
|
|
|
|
if (!cmd->fail_io)
|
|
|
|
dm_bm_set_read_write(cmd->bm);
|
|
|
|
|
|
|
|
up_write(&cmd->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
int dm_clone_get_free_metadata_block_count(struct dm_clone_metadata *cmd,
|
|
|
|
dm_block_t *result)
|
|
|
|
{
|
|
|
|
int r = -EINVAL;
|
|
|
|
|
|
|
|
down_read(&cmd->lock);
|
|
|
|
|
|
|
|
if (!cmd->fail_io)
|
|
|
|
r = dm_sm_get_nr_free(cmd->sm, result);
|
|
|
|
|
|
|
|
up_read(&cmd->lock);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
int dm_clone_get_metadata_dev_size(struct dm_clone_metadata *cmd,
|
|
|
|
dm_block_t *result)
|
|
|
|
{
|
|
|
|
int r = -EINVAL;
|
|
|
|
|
|
|
|
down_read(&cmd->lock);
|
|
|
|
|
|
|
|
if (!cmd->fail_io)
|
|
|
|
r = dm_sm_get_nr_blocks(cmd->sm, result);
|
|
|
|
|
|
|
|
up_read(&cmd->lock);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|