linux/sound/soc/codecs/Kconfig

410 lines
7.7 KiB
Plaintext
Raw Normal View History

# Helper to resolve issues with configs that have SPI enabled but I2C
# modular, meaning we can't build the codec driver in with I2C support.
# We use an ordered list of conditional defaults to pick the appropriate
# setting - SPI can't be modular so that case doesn't need to be covered.
config SND_SOC_I2C_AND_SPI
tristate
default m if I2C=m
default y if I2C=y
default y if SPI_MASTER=y
config SND_SOC_ALL_CODECS
tristate "Build all ASoC CODEC drivers"
select SND_SOC_88PM860X if MFD_88PM860X
select SND_SOC_L3
select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
select SND_SOC_AD1836 if SPI_MASTER
select SND_SOC_AD193X if SND_SOC_I2C_AND_SPI
select SND_SOC_AD1980 if SND_SOC_AC97_BUS
select SND_SOC_AD73311
select SND_SOC_ADAV80X
select SND_SOC_ADS117X
select SND_SOC_AK4104 if SPI_MASTER
select SND_SOC_AK4535 if I2C
select SND_SOC_AK4641 if I2C
select SND_SOC_AK4642 if I2C
select SND_SOC_AK4671 if I2C
select SND_SOC_ALC5623 if I2C
select SND_SOC_CQ0093VC if MFD_DAVINCI_VOICECODEC
select SND_SOC_CS42L51 if I2C
select SND_SOC_CS4270 if I2C
select SND_SOC_CS4271 if SND_SOC_I2C_AND_SPI
select SND_SOC_CX20442
select SND_SOC_DA7210 if I2C
select SND_SOC_DFBMCS320
select SND_SOC_JZ4740_CODEC if SOC_JZ4740
select SND_SOC_LM4857 if I2C
select SND_SOC_MAX98088 if I2C
select SND_SOC_MAX98095 if I2C
select SND_SOC_MAX9850 if I2C
select SND_SOC_MAX9877 if I2C
select SND_SOC_PCM3008
select SND_SOC_SGTL5000 if I2C
select SND_SOC_SN95031 if INTEL_SCU_IPC
select SND_SOC_SPDIF
select SND_SOC_SSM2602 if SND_SOC_I2C_AND_SPI
select SND_SOC_STA32X if I2C
select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
select SND_SOC_TLV320AIC23 if I2C
select SND_SOC_TLV320AIC26 if SPI_MASTER
select SND_SOC_TVL320AIC32X4 if I2C
select SND_SOC_TLV320AIC3X if I2C
select SND_SOC_TPA6130A2 if I2C
select SND_SOC_TLV320DAC33 if I2C
select SND_SOC_TWL4030 if TWL4030_CORE
select SND_SOC_TWL6040 if TWL4030_CORE
select SND_SOC_UDA134X
select SND_SOC_UDA1380 if I2C
select SND_SOC_WL1273 if MFD_WL1273_CORE
select SND_SOC_WM1250_EV1 if I2C
select SND_SOC_WM2000 if I2C
select SND_SOC_WM8350 if MFD_WM8350
select SND_SOC_WM8400 if MFD_WM8400
select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8523 if I2C
select SND_SOC_WM8580 if I2C
select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8727
select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8737 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8770 if SPI_MASTER
select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8782
select SND_SOC_WM8804 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8900 if I2C
select SND_SOC_WM8903 if I2C
select SND_SOC_WM8904 if I2C
select SND_SOC_WM8940 if I2C
select SND_SOC_WM8955 if I2C
select SND_SOC_WM8960 if I2C
select SND_SOC_WM8961 if I2C
select SND_SOC_WM8962 if I2C
select SND_SOC_WM8971 if I2C
select SND_SOC_WM8974 if I2C
select SND_SOC_WM8978 if I2C
select SND_SOC_WM8983 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8985 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8990 if I2C
select SND_SOC_WM8991 if I2C
select SND_SOC_WM8993 if I2C
select SND_SOC_WM8994 if MFD_WM8994
select SND_SOC_WM8995 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8996 if I2C
select SND_SOC_WM9081 if I2C
select SND_SOC_WM9090 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
select SND_SOC_WM9712 if SND_SOC_AC97_BUS
select SND_SOC_WM9713 if SND_SOC_AC97_BUS
help
Normally ASoC codec drivers are only built if a machine driver which
uses them is also built since they are only usable with a machine
driver. Selecting this option will allow these drivers to be built
without an explicit machine driver for test and development purposes.
Support for the bus types used to access the codecs to be built must
be selected separately.
If unsure select "N".
config SND_SOC_88PM860X
tristate
config SND_SOC_WM_HUBS
tristate
default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y
default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m
config SND_SOC_AC97_CODEC
tristate
select SND_AC97_CODEC
config SND_SOC_AD1836
tristate
config SND_SOC_AD193X
tristate
config SND_SOC_AD1980
tristate
config SND_SOC_AD73311
tristate
config SND_SOC_ADAU1701
select SIGMA
tristate
config SND_SOC_ADAV80X
tristate
config SND_SOC_ADS117X
tristate
config SND_SOC_AK4104
tristate
config SND_SOC_AK4535
tristate
config SND_SOC_AK4641
tristate
config SND_SOC_AK4642
tristate
config SND_SOC_AK4671
tristate
config SND_SOC_ALC5623
tristate
config SND_SOC_CQ0093VC
tristate
config SND_SOC_CS42L51
tristate
# Cirrus Logic CS4270 Codec
config SND_SOC_CS4270
tristate
# Cirrus Logic CS4270 Codec VD = 3.3V Errata
# Select if you are affected by the errata where the part will not function
# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
# not select any sample rates that require MCLK to be divided by 1.5.
config SND_SOC_CS4270_VD33_ERRATA
bool
depends on SND_SOC_CS4270
config SND_SOC_CS4271
tristate
ASoC: Add support for Conexant CX20442-11 voice modem codec This patch adds support for Conexant CX20442-11 voice modem codec, suitable for use by the ASoC board driver for Amstrad E3 (Delta) videophone. Related sound card driver will follow. This codec is an optional part of the Conexant SmartV three chip modem design. As such, documentation for its proprietary digital audio interface is not available. However, on Amstrad Delta board, thanks to Mark Underwood who created an initial, omap-alsa based sound driver a few years ago[1], the codec has been discovered to be accessible not only from the modem side, but also over the OMAP McBSP based CPU DAI. Thus, the driver can be used by any sound card that can access the codec DAI directly. The DAI configuration parameters (sample rate and format, number of channels) has been selected out empirically for best user experience. The codec analogue interface consists of two pairs of analogue I/O pins: speakerphone interface or telephone handset/headset interface. Furthermore, it seams to provide two operation modes for speakerphone I/O: standard and advanced, with automatic gain control and echo cancelation. Even if the codec control interface is unknown and not available, all those interfaces and modes can be selected over the modem chip using V.253 commands. The driver is able to issue necessary commands over a suitable hw_write function if provided by a sound card driver. Otherwise, the codec can be controlled over the modem from userspace while inactive. Even if nothig is known about the codec internal power management capabilities, DAPM widgets has been used to model the codec audio map. Automatically performed powering up/down of those virtual widgets results in corresponding V.253 commands being issued. Some driver features/oddities may be board specific, but I have no way to verify that with any board other than Amstrad Delta. [1] http://www.earth.li/pipermail/e3-hacking/2006-April/000481.html Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-22 03:22:28 +00:00
config SND_SOC_CX20442
tristate
config SND_SOC_JZ4740_CODEC
tristate
config SND_SOC_L3
tristate
config SND_SOC_DA7210
tristate
config SND_SOC_DFBMCS320
tristate
config SND_SOC_DMIC
tristate
config SND_SOC_MAX98088
tristate
config SND_SOC_MAX98095
tristate
config SND_SOC_MAX9850
tristate
config SND_SOC_PCM3008
tristate
#Freescale sgtl5000 codec
config SND_SOC_SGTL5000
tristate
config SND_SOC_SN95031
tristate
config SND_SOC_SPDIF
tristate
config SND_SOC_SSM2602
tristate
config SND_SOC_STA32X
tristate
config SND_SOC_STAC9766
tristate
config SND_SOC_TLV320AIC23
tristate
config SND_SOC_TLV320AIC26
tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
depends on SPI
config SND_SOC_TVL320AIC32X4
tristate
config SND_SOC_TLV320AIC3X
tristate
config SND_SOC_TLV320DAC33
tristate
config SND_SOC_TWL4030
select MFD_TWL4030_AUDIO
tristate
config SND_SOC_TWL6040
select TWL6040_CORE
tristate
config SND_SOC_UDA134X
tristate
config SND_SOC_UDA1380
tristate
config SND_SOC_WL1273
tristate
config SND_SOC_WM1250_EV1
tristate
config SND_SOC_WM8350
tristate
config SND_SOC_WM8400
tristate
config SND_SOC_WM8510
tristate
config SND_SOC_WM8523
tristate
config SND_SOC_WM8580
tristate
config SND_SOC_WM8711
tristate
config SND_SOC_WM8727
tristate
config SND_SOC_WM8728
tristate
config SND_SOC_WM8731
tristate
config SND_SOC_WM8737
tristate
config SND_SOC_WM8741
tristate
config SND_SOC_WM8750
tristate
config SND_SOC_WM8753
tristate
config SND_SOC_WM8770
tristate
config SND_SOC_WM8776
tristate
config SND_SOC_WM8782
tristate
config SND_SOC_WM8804
tristate
config SND_SOC_WM8900
tristate
config SND_SOC_WM8903
tristate
config SND_SOC_WM8904
tristate
config SND_SOC_WM8940
tristate
config SND_SOC_WM8955
tristate
config SND_SOC_WM8960
tristate
config SND_SOC_WM8961
tristate
config SND_SOC_WM8962
tristate
config SND_SOC_WM8971
tristate
config SND_SOC_WM8974
tristate
config SND_SOC_WM8978
tristate
config SND_SOC_WM8983
tristate
config SND_SOC_WM8985
tristate
config SND_SOC_WM8988
tristate
config SND_SOC_WM8990
tristate
config SND_SOC_WM8991
tristate
config SND_SOC_WM8993
tristate
config SND_SOC_WM8994
tristate
config SND_SOC_WM8995
tristate
config SND_SOC_WM8996
tristate
config SND_SOC_WM9081
tristate
config SND_SOC_WM9705
tristate
config SND_SOC_WM9712
tristate
config SND_SOC_WM9713
tristate
# Amp
config SND_SOC_LM4857
tristate
config SND_SOC_MAX9877
tristate
config SND_SOC_TPA6130A2
tristate
config SND_SOC_WM2000
tristate
config SND_SOC_WM9090
tristate