linux/kernel/trace/trace_event_perf.c

530 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* trace event based perf event profiling/tracing
*
* Copyright (C) 2009 Red Hat Inc, Peter Zijlstra
perf: Take a hot regs snapshot for trace events We are taking a wrong regs snapshot when a trace event triggers. Either we use get_irq_regs(), which gives us the interrupted registers if we are in an interrupt, or we use task_pt_regs() which gives us the state before we entered the kernel, assuming we are lucky enough to be no kernel thread, in which case task_pt_regs() returns the initial set of regs when the kernel thread was started. What we want is different. We need a hot snapshot of the regs, so that we can get the instruction pointer to record in the sample, the frame pointer for the callchain, and some other things. Let's use the new perf_fetch_caller_regs() for that. Comparison with perf record -e lock: -R -a -f -g Before: perf [kernel] [k] __do_softirq | --- __do_softirq | |--55.16%-- __open | --44.84%-- __write_nocancel After: perf [kernel] [k] perf_tp_event | --- perf_tp_event | |--41.07%-- lock_acquire | | | |--39.36%-- _raw_spin_lock | | | | | |--7.81%-- hrtimer_interrupt | | | smp_apic_timer_interrupt | | | apic_timer_interrupt The old case was producing unreliable callchains. Now having right frame and instruction pointers, we have the trace we want. Also syscalls and kprobe events already have the right regs, let's use them instead of wasting a retrieval. v2: Follow the rename perf_save_regs() -> perf_fetch_caller_regs() Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Archs <linux-arch@vger.kernel.org>
2010-03-03 06:16:16 +00:00
* Copyright (C) 2009-2010 Frederic Weisbecker <fweisbec@gmail.com>
*/
#include <linux/module.h>
#include <linux/kprobes.h>
perf_event: Add support for LSM and SELinux checks In current mainline, the degree of access to perf_event_open(2) system call depends on the perf_event_paranoid sysctl. This has a number of limitations: 1. The sysctl is only a single value. Many types of accesses are controlled based on the single value thus making the control very limited and coarse grained. 2. The sysctl is global, so if the sysctl is changed, then that means all processes get access to perf_event_open(2) opening the door to security issues. This patch adds LSM and SELinux access checking which will be used in Android to access perf_event_open(2) for the purposes of attaching BPF programs to tracepoints, perf profiling and other operations from userspace. These operations are intended for production systems. 5 new LSM hooks are added: 1. perf_event_open: This controls access during the perf_event_open(2) syscall itself. The hook is called from all the places that the perf_event_paranoid sysctl is checked to keep it consistent with the systctl. The hook gets passed a 'type' argument which controls CPU, kernel and tracepoint accesses (in this context, CPU, kernel and tracepoint have the same semantics as the perf_event_paranoid sysctl). Additionally, I added an 'open' type which is similar to perf_event_paranoid sysctl == 3 patch carried in Android and several other distros but was rejected in mainline [1] in 2016. 2. perf_event_alloc: This allocates a new security object for the event which stores the current SID within the event. It will be useful when the perf event's FD is passed through IPC to another process which may try to read the FD. Appropriate security checks will limit access. 3. perf_event_free: Called when the event is closed. 4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event. 5. perf_event_write: Called from the ioctl(2) syscalls for the event. [1] https://lwn.net/Articles/696240/ Since Peter had suggest LSM hooks in 2016 [1], I am adding his Suggested-by tag below. To use this patch, we set the perf_event_paranoid sysctl to -1 and then apply selinux checking as appropriate (default deny everything, and then add policy rules to give access to domains that need it). In the future we can remove the perf_event_paranoid sysctl altogether. Suggested-by: Peter Zijlstra <peterz@infradead.org> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: James Morris <jmorris@namei.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: rostedt@goodmis.org Cc: Yonghong Song <yhs@fb.com> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: jeffv@google.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: primiano@google.com Cc: Song Liu <songliubraving@fb.com> Cc: rsavitski@google.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Matthew Garrett <matthewgarrett@google.com> Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
2019-10-14 17:03:08 +00:00
#include <linux/security.h>
#include "trace.h"
#include "trace_probe.h"
static char __percpu *perf_trace_buf[PERF_NR_CONTEXTS];
/*
* Force it to be aligned to unsigned long to avoid misaligned accesses
* surprises
*/
typedef typeof(unsigned long [PERF_MAX_TRACE_SIZE / sizeof(unsigned long)])
perf_trace_t;
/* Count the events in use (per event id, not per instance) */
static int total_ref_count;
static int perf_trace_event_perm(struct trace_event_call *tp_event,
struct perf_event *p_event)
{
perf_event: Add support for LSM and SELinux checks In current mainline, the degree of access to perf_event_open(2) system call depends on the perf_event_paranoid sysctl. This has a number of limitations: 1. The sysctl is only a single value. Many types of accesses are controlled based on the single value thus making the control very limited and coarse grained. 2. The sysctl is global, so if the sysctl is changed, then that means all processes get access to perf_event_open(2) opening the door to security issues. This patch adds LSM and SELinux access checking which will be used in Android to access perf_event_open(2) for the purposes of attaching BPF programs to tracepoints, perf profiling and other operations from userspace. These operations are intended for production systems. 5 new LSM hooks are added: 1. perf_event_open: This controls access during the perf_event_open(2) syscall itself. The hook is called from all the places that the perf_event_paranoid sysctl is checked to keep it consistent with the systctl. The hook gets passed a 'type' argument which controls CPU, kernel and tracepoint accesses (in this context, CPU, kernel and tracepoint have the same semantics as the perf_event_paranoid sysctl). Additionally, I added an 'open' type which is similar to perf_event_paranoid sysctl == 3 patch carried in Android and several other distros but was rejected in mainline [1] in 2016. 2. perf_event_alloc: This allocates a new security object for the event which stores the current SID within the event. It will be useful when the perf event's FD is passed through IPC to another process which may try to read the FD. Appropriate security checks will limit access. 3. perf_event_free: Called when the event is closed. 4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event. 5. perf_event_write: Called from the ioctl(2) syscalls for the event. [1] https://lwn.net/Articles/696240/ Since Peter had suggest LSM hooks in 2016 [1], I am adding his Suggested-by tag below. To use this patch, we set the perf_event_paranoid sysctl to -1 and then apply selinux checking as appropriate (default deny everything, and then add policy rules to give access to domains that need it). In the future we can remove the perf_event_paranoid sysctl altogether. Suggested-by: Peter Zijlstra <peterz@infradead.org> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: James Morris <jmorris@namei.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: rostedt@goodmis.org Cc: Yonghong Song <yhs@fb.com> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: jeffv@google.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: primiano@google.com Cc: Song Liu <songliubraving@fb.com> Cc: rsavitski@google.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Matthew Garrett <matthewgarrett@google.com> Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
2019-10-14 17:03:08 +00:00
int ret;
if (tp_event->perf_perm) {
perf_event: Add support for LSM and SELinux checks In current mainline, the degree of access to perf_event_open(2) system call depends on the perf_event_paranoid sysctl. This has a number of limitations: 1. The sysctl is only a single value. Many types of accesses are controlled based on the single value thus making the control very limited and coarse grained. 2. The sysctl is global, so if the sysctl is changed, then that means all processes get access to perf_event_open(2) opening the door to security issues. This patch adds LSM and SELinux access checking which will be used in Android to access perf_event_open(2) for the purposes of attaching BPF programs to tracepoints, perf profiling and other operations from userspace. These operations are intended for production systems. 5 new LSM hooks are added: 1. perf_event_open: This controls access during the perf_event_open(2) syscall itself. The hook is called from all the places that the perf_event_paranoid sysctl is checked to keep it consistent with the systctl. The hook gets passed a 'type' argument which controls CPU, kernel and tracepoint accesses (in this context, CPU, kernel and tracepoint have the same semantics as the perf_event_paranoid sysctl). Additionally, I added an 'open' type which is similar to perf_event_paranoid sysctl == 3 patch carried in Android and several other distros but was rejected in mainline [1] in 2016. 2. perf_event_alloc: This allocates a new security object for the event which stores the current SID within the event. It will be useful when the perf event's FD is passed through IPC to another process which may try to read the FD. Appropriate security checks will limit access. 3. perf_event_free: Called when the event is closed. 4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event. 5. perf_event_write: Called from the ioctl(2) syscalls for the event. [1] https://lwn.net/Articles/696240/ Since Peter had suggest LSM hooks in 2016 [1], I am adding his Suggested-by tag below. To use this patch, we set the perf_event_paranoid sysctl to -1 and then apply selinux checking as appropriate (default deny everything, and then add policy rules to give access to domains that need it). In the future we can remove the perf_event_paranoid sysctl altogether. Suggested-by: Peter Zijlstra <peterz@infradead.org> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: James Morris <jmorris@namei.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: rostedt@goodmis.org Cc: Yonghong Song <yhs@fb.com> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: jeffv@google.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: primiano@google.com Cc: Song Liu <songliubraving@fb.com> Cc: rsavitski@google.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Matthew Garrett <matthewgarrett@google.com> Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
2019-10-14 17:03:08 +00:00
ret = tp_event->perf_perm(tp_event, p_event);
if (ret)
return ret;
}
/*
* We checked and allowed to create parent,
* allow children without checking.
*/
if (p_event->parent)
return 0;
/*
* It's ok to check current process (owner) permissions in here,
* because code below is called only via perf_event_open syscall.
*/
/* The ftrace function trace is allowed only for root. */
if (ftrace_event_is_function(tp_event)) {
perf_event: Add support for LSM and SELinux checks In current mainline, the degree of access to perf_event_open(2) system call depends on the perf_event_paranoid sysctl. This has a number of limitations: 1. The sysctl is only a single value. Many types of accesses are controlled based on the single value thus making the control very limited and coarse grained. 2. The sysctl is global, so if the sysctl is changed, then that means all processes get access to perf_event_open(2) opening the door to security issues. This patch adds LSM and SELinux access checking which will be used in Android to access perf_event_open(2) for the purposes of attaching BPF programs to tracepoints, perf profiling and other operations from userspace. These operations are intended for production systems. 5 new LSM hooks are added: 1. perf_event_open: This controls access during the perf_event_open(2) syscall itself. The hook is called from all the places that the perf_event_paranoid sysctl is checked to keep it consistent with the systctl. The hook gets passed a 'type' argument which controls CPU, kernel and tracepoint accesses (in this context, CPU, kernel and tracepoint have the same semantics as the perf_event_paranoid sysctl). Additionally, I added an 'open' type which is similar to perf_event_paranoid sysctl == 3 patch carried in Android and several other distros but was rejected in mainline [1] in 2016. 2. perf_event_alloc: This allocates a new security object for the event which stores the current SID within the event. It will be useful when the perf event's FD is passed through IPC to another process which may try to read the FD. Appropriate security checks will limit access. 3. perf_event_free: Called when the event is closed. 4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event. 5. perf_event_write: Called from the ioctl(2) syscalls for the event. [1] https://lwn.net/Articles/696240/ Since Peter had suggest LSM hooks in 2016 [1], I am adding his Suggested-by tag below. To use this patch, we set the perf_event_paranoid sysctl to -1 and then apply selinux checking as appropriate (default deny everything, and then add policy rules to give access to domains that need it). In the future we can remove the perf_event_paranoid sysctl altogether. Suggested-by: Peter Zijlstra <peterz@infradead.org> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: James Morris <jmorris@namei.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: rostedt@goodmis.org Cc: Yonghong Song <yhs@fb.com> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: jeffv@google.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: primiano@google.com Cc: Song Liu <songliubraving@fb.com> Cc: rsavitski@google.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Matthew Garrett <matthewgarrett@google.com> Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
2019-10-14 17:03:08 +00:00
ret = perf_allow_tracepoint(&p_event->attr);
if (ret)
return ret;
if (!is_sampling_event(p_event))
return 0;
/*
* We don't allow user space callchains for function trace
* event, due to issues with page faults while tracing page
* fault handler and its overall trickiness nature.
*/
if (!p_event->attr.exclude_callchain_user)
return -EINVAL;
/*
* Same reason to disable user stack dump as for user space
* callchains above.
*/
if (p_event->attr.sample_type & PERF_SAMPLE_STACK_USER)
return -EINVAL;
}
/* No tracing, just counting, so no obvious leak */
if (!(p_event->attr.sample_type & PERF_SAMPLE_RAW))
return 0;
/* Some events are ok to be traced by non-root users... */
if (p_event->attach_state == PERF_ATTACH_TASK) {
if (tp_event->flags & TRACE_EVENT_FL_CAP_ANY)
return 0;
}
/*
* ...otherwise raw tracepoint data can be a severe data leak,
* only allow root to have these.
*/
perf_event: Add support for LSM and SELinux checks In current mainline, the degree of access to perf_event_open(2) system call depends on the perf_event_paranoid sysctl. This has a number of limitations: 1. The sysctl is only a single value. Many types of accesses are controlled based on the single value thus making the control very limited and coarse grained. 2. The sysctl is global, so if the sysctl is changed, then that means all processes get access to perf_event_open(2) opening the door to security issues. This patch adds LSM and SELinux access checking which will be used in Android to access perf_event_open(2) for the purposes of attaching BPF programs to tracepoints, perf profiling and other operations from userspace. These operations are intended for production systems. 5 new LSM hooks are added: 1. perf_event_open: This controls access during the perf_event_open(2) syscall itself. The hook is called from all the places that the perf_event_paranoid sysctl is checked to keep it consistent with the systctl. The hook gets passed a 'type' argument which controls CPU, kernel and tracepoint accesses (in this context, CPU, kernel and tracepoint have the same semantics as the perf_event_paranoid sysctl). Additionally, I added an 'open' type which is similar to perf_event_paranoid sysctl == 3 patch carried in Android and several other distros but was rejected in mainline [1] in 2016. 2. perf_event_alloc: This allocates a new security object for the event which stores the current SID within the event. It will be useful when the perf event's FD is passed through IPC to another process which may try to read the FD. Appropriate security checks will limit access. 3. perf_event_free: Called when the event is closed. 4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event. 5. perf_event_write: Called from the ioctl(2) syscalls for the event. [1] https://lwn.net/Articles/696240/ Since Peter had suggest LSM hooks in 2016 [1], I am adding his Suggested-by tag below. To use this patch, we set the perf_event_paranoid sysctl to -1 and then apply selinux checking as appropriate (default deny everything, and then add policy rules to give access to domains that need it). In the future we can remove the perf_event_paranoid sysctl altogether. Suggested-by: Peter Zijlstra <peterz@infradead.org> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: James Morris <jmorris@namei.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: rostedt@goodmis.org Cc: Yonghong Song <yhs@fb.com> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: jeffv@google.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: primiano@google.com Cc: Song Liu <songliubraving@fb.com> Cc: rsavitski@google.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Matthew Garrett <matthewgarrett@google.com> Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
2019-10-14 17:03:08 +00:00
ret = perf_allow_tracepoint(&p_event->attr);
if (ret)
return ret;
return 0;
}
static int perf_trace_event_reg(struct trace_event_call *tp_event,
struct perf_event *p_event)
{
struct hlist_head __percpu *list;
int ret = -ENOMEM;
int cpu;
p_event->tp_event = tp_event;
if (tp_event->perf_refcount++ > 0)
return 0;
list = alloc_percpu(struct hlist_head);
if (!list)
goto fail;
for_each_possible_cpu(cpu)
INIT_HLIST_HEAD(per_cpu_ptr(list, cpu));
tp_event->perf_events = list;
if (!total_ref_count) {
char __percpu *buf;
int i;
for (i = 0; i < PERF_NR_CONTEXTS; i++) {
buf = (char __percpu *)alloc_percpu(perf_trace_t);
if (!buf)
goto fail;
perf_trace_buf[i] = buf;
}
}
ret = tp_event->class->reg(tp_event, TRACE_REG_PERF_REGISTER, NULL);
if (ret)
goto fail;
total_ref_count++;
return 0;
fail:
if (!total_ref_count) {
int i;
for (i = 0; i < PERF_NR_CONTEXTS; i++) {
free_percpu(perf_trace_buf[i]);
perf_trace_buf[i] = NULL;
}
}
if (!--tp_event->perf_refcount) {
free_percpu(tp_event->perf_events);
tp_event->perf_events = NULL;
}
return ret;
}
static void perf_trace_event_unreg(struct perf_event *p_event)
{
struct trace_event_call *tp_event = p_event->tp_event;
int i;
if (--tp_event->perf_refcount > 0)
tracing/perf: Fix double put of trace event when init fails If in perf_trace_event_init(), the perf_trace_event_open() fails, then it will call perf_trace_event_unreg() which will not only unregister the perf trace event, but will also call the put() function of the tp_event. The problem here is that the trace_event_try_get_ref() is called by the caller of perf_trace_event_init() and if perf_trace_event_init() returns a failure, it will then call trace_event_put(). But since the perf_trace_event_unreg() already called the trace_event_put() function, it triggers a WARN_ON(). WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20 If perf_trace_event_reg() does not call the trace_event_try_get_ref() then the perf_trace_event_unreg() should not be calling trace_event_put(). This breaks symmetry and causes bugs like these. Pull out the trace_event_put() from perf_trace_event_unreg() and call it in the locations that perf_trace_event_unreg() is called. This not only fixes this bug, but also brings back the proper symmetry of the reg/unreg vs get/put logic. Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/ Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 1d18538e6a092 ("tracing: Have dynamic events have a ref counter") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Reviewed-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Krister Johansen <kjlx@templeofstupid.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-16 23:28:17 +00:00
return;
tp_event->class->reg(tp_event, TRACE_REG_PERF_UNREGISTER, NULL);
/*
* Ensure our callback won't be called anymore. The buffers
* will be freed after that.
*/
tracepoint_synchronize_unregister();
free_percpu(tp_event->perf_events);
tp_event->perf_events = NULL;
if (!--total_ref_count) {
for (i = 0; i < PERF_NR_CONTEXTS; i++) {
free_percpu(perf_trace_buf[i]);
perf_trace_buf[i] = NULL;
}
}
}
static int perf_trace_event_open(struct perf_event *p_event)
{
struct trace_event_call *tp_event = p_event->tp_event;
return tp_event->class->reg(tp_event, TRACE_REG_PERF_OPEN, p_event);
}
static void perf_trace_event_close(struct perf_event *p_event)
{
struct trace_event_call *tp_event = p_event->tp_event;
tp_event->class->reg(tp_event, TRACE_REG_PERF_CLOSE, p_event);
}
static int perf_trace_event_init(struct trace_event_call *tp_event,
struct perf_event *p_event)
{
int ret;
ret = perf_trace_event_perm(tp_event, p_event);
if (ret)
return ret;
ret = perf_trace_event_reg(tp_event, p_event);
if (ret)
return ret;
ret = perf_trace_event_open(p_event);
if (ret) {
perf_trace_event_unreg(p_event);
return ret;
}
return 0;
}
int perf_trace_init(struct perf_event *p_event)
{
struct trace_event_call *tp_event;
u64 event_id = p_event->attr.config;
int ret = -EINVAL;
mutex_lock(&event_mutex);
list_for_each_entry(tp_event, &ftrace_events, list) {
if (tp_event->event.type == event_id &&
tp_event->class && tp_event->class->reg &&
trace_event_try_get_ref(tp_event)) {
ret = perf_trace_event_init(tp_event, p_event);
if (ret)
trace_event_put_ref(tp_event);
break;
}
}
mutex_unlock(&event_mutex);
return ret;
}
void perf_trace_destroy(struct perf_event *p_event)
{
mutex_lock(&event_mutex);
perf_trace_event_close(p_event);
perf_trace_event_unreg(p_event);
tracing/perf: Fix double put of trace event when init fails If in perf_trace_event_init(), the perf_trace_event_open() fails, then it will call perf_trace_event_unreg() which will not only unregister the perf trace event, but will also call the put() function of the tp_event. The problem here is that the trace_event_try_get_ref() is called by the caller of perf_trace_event_init() and if perf_trace_event_init() returns a failure, it will then call trace_event_put(). But since the perf_trace_event_unreg() already called the trace_event_put() function, it triggers a WARN_ON(). WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20 If perf_trace_event_reg() does not call the trace_event_try_get_ref() then the perf_trace_event_unreg() should not be calling trace_event_put(). This breaks symmetry and causes bugs like these. Pull out the trace_event_put() from perf_trace_event_unreg() and call it in the locations that perf_trace_event_unreg() is called. This not only fixes this bug, but also brings back the proper symmetry of the reg/unreg vs get/put logic. Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/ Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 1d18538e6a092 ("tracing: Have dynamic events have a ref counter") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Reviewed-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Krister Johansen <kjlx@templeofstupid.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-16 23:28:17 +00:00
trace_event_put_ref(p_event->tp_event);
mutex_unlock(&event_mutex);
}
#ifdef CONFIG_KPROBE_EVENTS
int perf_kprobe_init(struct perf_event *p_event, bool is_retprobe)
{
int ret;
char *func = NULL;
struct trace_event_call *tp_event;
if (p_event->attr.kprobe_func) {
func = kzalloc(KSYM_NAME_LEN, GFP_KERNEL);
if (!func)
return -ENOMEM;
ret = strncpy_from_user(
func, u64_to_user_ptr(p_event->attr.kprobe_func),
KSYM_NAME_LEN);
perf/core: Fix perf_kprobe_init() Fix error handling in perf_kprobe_init(): ================================================================== BUG: KASAN: slab-out-of-bounds in strlen+0x8e/0xa0 lib/string.c:482 Read of size 1 at addr ffff88003f9cc5c0 by task syz-executor2/23095 CPU: 0 PID: 23095 Comm: syz-executor2 Not tainted 4.16.0+ #24 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6e/0x2c0 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x256/0x380 mm/kasan/report.c:412 strlen+0x8e/0xa0 lib/string.c:482 kstrdup+0x21/0x70 mm/util.c:55 alloc_trace_kprobe+0xc8/0x930 kernel/trace/trace_kprobe.c:325 create_local_trace_kprobe+0x4f/0x3a0 kernel/trace/trace_kprobe.c:1438 perf_kprobe_init+0x149/0x1f0 kernel/trace/trace_event_perf.c:264 perf_kprobe_event_init+0xa8/0x120 kernel/events/core.c:8407 perf_try_init_event+0xcb/0x2a0 kernel/events/core.c:9719 perf_init_event kernel/events/core.c:9750 [inline] perf_event_alloc+0x1367/0x1e20 kernel/events/core.c:10022 SYSC_perf_event_open+0x242/0x2330 kernel/events/core.c:10477 do_syscall_64+0x198/0x640 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Reported-by: 范龙飞 <long7573@126.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: e12f03d7031a ("perf/core: Implement the 'perf_kprobe' PMU") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-09 12:16:54 +00:00
if (ret == KSYM_NAME_LEN)
ret = -E2BIG;
if (ret < 0)
goto out;
if (func[0] == '\0') {
kfree(func);
func = NULL;
}
}
tp_event = create_local_trace_kprobe(
func, (void *)(unsigned long)(p_event->attr.kprobe_addr),
p_event->attr.probe_offset, is_retprobe);
if (IS_ERR(tp_event)) {
ret = PTR_ERR(tp_event);
goto out;
}
tracing: Fix race in perf_trace_buf initialization A race condition exists while initialiazing perf_trace_buf from perf_trace_init() and perf_kprobe_init(). CPU0 CPU1 perf_trace_init() mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() //fails perf_kprobe_init() goto fail perf_trace_event_init() perf_trace_event_reg() fail: total_ref_count == 0 total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() total_ref_count++ free_percpu(perf_trace_buf[i]) perf_trace_buf[i] = NULL Any subsequent call to perf_trace_event_reg() will observe total_ref_count > 0, causing the perf_trace_buf to be always NULL. This can result in perf_trace_buf getting accessed from perf_trace_buf_alloc() without being initialized. Acquiring event_mutex in perf_kprobe_init() before calling perf_trace_event_init() should fix this race. The race caused the following bug: Unable to handle kernel paging request at virtual address 0000003106f2003c Mem abort info: ESR = 0x96000045 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000045 CM = 0, WnR = 1 user pgtable: 4k pages, 39-bit VAs, pgdp = ffffffc034b9b000 [0000003106f2003c] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000045 [#1] PREEMPT SMP Process syz-executor (pid: 18393, stack limit = 0xffffffc093190000) pstate: 80400005 (Nzcv daif +PAN -UAO) pc : __memset+0x20/0x1ac lr : memset+0x3c/0x50 sp : ffffffc09319fc50 __memset+0x20/0x1ac perf_trace_buf_alloc+0x140/0x1a0 perf_trace_sys_enter+0x158/0x310 syscall_trace_enter+0x348/0x7c0 el0_svc_common+0x11c/0x368 el0_svc_handler+0x12c/0x198 el0_svc+0x8/0xc Ramdumps showed the following: total_ref_count = 3 perf_trace_buf = ( 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL) Link: http://lkml.kernel.org/r/1571120245-4186-1-git-send-email-prsood@codeaurora.org Cc: stable@vger.kernel.org Fixes: e12f03d7031a9 ("perf/core: Implement the 'perf_kprobe' PMU") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-15 06:17:25 +00:00
mutex_lock(&event_mutex);
ret = perf_trace_event_init(tp_event, p_event);
if (ret)
destroy_local_trace_kprobe(tp_event);
tracing: Fix race in perf_trace_buf initialization A race condition exists while initialiazing perf_trace_buf from perf_trace_init() and perf_kprobe_init(). CPU0 CPU1 perf_trace_init() mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() //fails perf_kprobe_init() goto fail perf_trace_event_init() perf_trace_event_reg() fail: total_ref_count == 0 total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() total_ref_count++ free_percpu(perf_trace_buf[i]) perf_trace_buf[i] = NULL Any subsequent call to perf_trace_event_reg() will observe total_ref_count > 0, causing the perf_trace_buf to be always NULL. This can result in perf_trace_buf getting accessed from perf_trace_buf_alloc() without being initialized. Acquiring event_mutex in perf_kprobe_init() before calling perf_trace_event_init() should fix this race. The race caused the following bug: Unable to handle kernel paging request at virtual address 0000003106f2003c Mem abort info: ESR = 0x96000045 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000045 CM = 0, WnR = 1 user pgtable: 4k pages, 39-bit VAs, pgdp = ffffffc034b9b000 [0000003106f2003c] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000045 [#1] PREEMPT SMP Process syz-executor (pid: 18393, stack limit = 0xffffffc093190000) pstate: 80400005 (Nzcv daif +PAN -UAO) pc : __memset+0x20/0x1ac lr : memset+0x3c/0x50 sp : ffffffc09319fc50 __memset+0x20/0x1ac perf_trace_buf_alloc+0x140/0x1a0 perf_trace_sys_enter+0x158/0x310 syscall_trace_enter+0x348/0x7c0 el0_svc_common+0x11c/0x368 el0_svc_handler+0x12c/0x198 el0_svc+0x8/0xc Ramdumps showed the following: total_ref_count = 3 perf_trace_buf = ( 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL) Link: http://lkml.kernel.org/r/1571120245-4186-1-git-send-email-prsood@codeaurora.org Cc: stable@vger.kernel.org Fixes: e12f03d7031a9 ("perf/core: Implement the 'perf_kprobe' PMU") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-15 06:17:25 +00:00
mutex_unlock(&event_mutex);
out:
kfree(func);
return ret;
}
void perf_kprobe_destroy(struct perf_event *p_event)
{
tracing: Fix race in perf_trace_buf initialization A race condition exists while initialiazing perf_trace_buf from perf_trace_init() and perf_kprobe_init(). CPU0 CPU1 perf_trace_init() mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() //fails perf_kprobe_init() goto fail perf_trace_event_init() perf_trace_event_reg() fail: total_ref_count == 0 total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() total_ref_count++ free_percpu(perf_trace_buf[i]) perf_trace_buf[i] = NULL Any subsequent call to perf_trace_event_reg() will observe total_ref_count > 0, causing the perf_trace_buf to be always NULL. This can result in perf_trace_buf getting accessed from perf_trace_buf_alloc() without being initialized. Acquiring event_mutex in perf_kprobe_init() before calling perf_trace_event_init() should fix this race. The race caused the following bug: Unable to handle kernel paging request at virtual address 0000003106f2003c Mem abort info: ESR = 0x96000045 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000045 CM = 0, WnR = 1 user pgtable: 4k pages, 39-bit VAs, pgdp = ffffffc034b9b000 [0000003106f2003c] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000045 [#1] PREEMPT SMP Process syz-executor (pid: 18393, stack limit = 0xffffffc093190000) pstate: 80400005 (Nzcv daif +PAN -UAO) pc : __memset+0x20/0x1ac lr : memset+0x3c/0x50 sp : ffffffc09319fc50 __memset+0x20/0x1ac perf_trace_buf_alloc+0x140/0x1a0 perf_trace_sys_enter+0x158/0x310 syscall_trace_enter+0x348/0x7c0 el0_svc_common+0x11c/0x368 el0_svc_handler+0x12c/0x198 el0_svc+0x8/0xc Ramdumps showed the following: total_ref_count = 3 perf_trace_buf = ( 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL) Link: http://lkml.kernel.org/r/1571120245-4186-1-git-send-email-prsood@codeaurora.org Cc: stable@vger.kernel.org Fixes: e12f03d7031a9 ("perf/core: Implement the 'perf_kprobe' PMU") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-15 06:17:25 +00:00
mutex_lock(&event_mutex);
perf_trace_event_close(p_event);
perf_trace_event_unreg(p_event);
tracing/perf: Fix double put of trace event when init fails If in perf_trace_event_init(), the perf_trace_event_open() fails, then it will call perf_trace_event_unreg() which will not only unregister the perf trace event, but will also call the put() function of the tp_event. The problem here is that the trace_event_try_get_ref() is called by the caller of perf_trace_event_init() and if perf_trace_event_init() returns a failure, it will then call trace_event_put(). But since the perf_trace_event_unreg() already called the trace_event_put() function, it triggers a WARN_ON(). WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20 If perf_trace_event_reg() does not call the trace_event_try_get_ref() then the perf_trace_event_unreg() should not be calling trace_event_put(). This breaks symmetry and causes bugs like these. Pull out the trace_event_put() from perf_trace_event_unreg() and call it in the locations that perf_trace_event_unreg() is called. This not only fixes this bug, but also brings back the proper symmetry of the reg/unreg vs get/put logic. Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/ Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 1d18538e6a092 ("tracing: Have dynamic events have a ref counter") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Reviewed-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Krister Johansen <kjlx@templeofstupid.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-16 23:28:17 +00:00
trace_event_put_ref(p_event->tp_event);
tracing: Fix race in perf_trace_buf initialization A race condition exists while initialiazing perf_trace_buf from perf_trace_init() and perf_kprobe_init(). CPU0 CPU1 perf_trace_init() mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() //fails perf_kprobe_init() goto fail perf_trace_event_init() perf_trace_event_reg() fail: total_ref_count == 0 total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() total_ref_count++ free_percpu(perf_trace_buf[i]) perf_trace_buf[i] = NULL Any subsequent call to perf_trace_event_reg() will observe total_ref_count > 0, causing the perf_trace_buf to be always NULL. This can result in perf_trace_buf getting accessed from perf_trace_buf_alloc() without being initialized. Acquiring event_mutex in perf_kprobe_init() before calling perf_trace_event_init() should fix this race. The race caused the following bug: Unable to handle kernel paging request at virtual address 0000003106f2003c Mem abort info: ESR = 0x96000045 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000045 CM = 0, WnR = 1 user pgtable: 4k pages, 39-bit VAs, pgdp = ffffffc034b9b000 [0000003106f2003c] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000045 [#1] PREEMPT SMP Process syz-executor (pid: 18393, stack limit = 0xffffffc093190000) pstate: 80400005 (Nzcv daif +PAN -UAO) pc : __memset+0x20/0x1ac lr : memset+0x3c/0x50 sp : ffffffc09319fc50 __memset+0x20/0x1ac perf_trace_buf_alloc+0x140/0x1a0 perf_trace_sys_enter+0x158/0x310 syscall_trace_enter+0x348/0x7c0 el0_svc_common+0x11c/0x368 el0_svc_handler+0x12c/0x198 el0_svc+0x8/0xc Ramdumps showed the following: total_ref_count = 3 perf_trace_buf = ( 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL) Link: http://lkml.kernel.org/r/1571120245-4186-1-git-send-email-prsood@codeaurora.org Cc: stable@vger.kernel.org Fixes: e12f03d7031a9 ("perf/core: Implement the 'perf_kprobe' PMU") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-15 06:17:25 +00:00
mutex_unlock(&event_mutex);
destroy_local_trace_kprobe(p_event->tp_event);
}
#endif /* CONFIG_KPROBE_EVENTS */
#ifdef CONFIG_UPROBE_EVENTS
int perf_uprobe_init(struct perf_event *p_event,
unsigned long ref_ctr_offset, bool is_retprobe)
{
int ret;
char *path = NULL;
struct trace_event_call *tp_event;
if (!p_event->attr.uprobe_path)
return -EINVAL;
path = strndup_user(u64_to_user_ptr(p_event->attr.uprobe_path),
PATH_MAX);
if (IS_ERR(path)) {
ret = PTR_ERR(path);
return (ret == -EINVAL) ? -E2BIG : ret;
}
if (path[0] == '\0') {
ret = -EINVAL;
goto out;
}
tp_event = create_local_trace_uprobe(path, p_event->attr.probe_offset,
ref_ctr_offset, is_retprobe);
if (IS_ERR(tp_event)) {
ret = PTR_ERR(tp_event);
goto out;
}
/*
* local trace_uprobe need to hold event_mutex to call
* uprobe_buffer_enable() and uprobe_buffer_disable().
* event_mutex is not required for local trace_kprobes.
*/
mutex_lock(&event_mutex);
ret = perf_trace_event_init(tp_event, p_event);
if (ret)
destroy_local_trace_uprobe(tp_event);
mutex_unlock(&event_mutex);
out:
kfree(path);
return ret;
}
void perf_uprobe_destroy(struct perf_event *p_event)
{
mutex_lock(&event_mutex);
perf_trace_event_close(p_event);
perf_trace_event_unreg(p_event);
tracing/perf: Fix double put of trace event when init fails If in perf_trace_event_init(), the perf_trace_event_open() fails, then it will call perf_trace_event_unreg() which will not only unregister the perf trace event, but will also call the put() function of the tp_event. The problem here is that the trace_event_try_get_ref() is called by the caller of perf_trace_event_init() and if perf_trace_event_init() returns a failure, it will then call trace_event_put(). But since the perf_trace_event_unreg() already called the trace_event_put() function, it triggers a WARN_ON(). WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20 If perf_trace_event_reg() does not call the trace_event_try_get_ref() then the perf_trace_event_unreg() should not be calling trace_event_put(). This breaks symmetry and causes bugs like these. Pull out the trace_event_put() from perf_trace_event_unreg() and call it in the locations that perf_trace_event_unreg() is called. This not only fixes this bug, but also brings back the proper symmetry of the reg/unreg vs get/put logic. Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/ Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 1d18538e6a092 ("tracing: Have dynamic events have a ref counter") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Reviewed-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Krister Johansen <kjlx@templeofstupid.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-16 23:28:17 +00:00
trace_event_put_ref(p_event->tp_event);
mutex_unlock(&event_mutex);
destroy_local_trace_uprobe(p_event->tp_event);
}
#endif /* CONFIG_UPROBE_EVENTS */
2010-06-16 12:37:10 +00:00
int perf_trace_add(struct perf_event *p_event, int flags)
{
struct trace_event_call *tp_event = p_event->tp_event;
2010-06-16 12:37:10 +00:00
if (!(flags & PERF_EF_START))
p_event->hw.state = PERF_HES_STOPPED;
/*
* If TRACE_REG_PERF_ADD returns false; no custom action was performed
* and we need to take the default action of enqueueing our event on
* the right per-cpu hlist.
*/
if (!tp_event->class->reg(tp_event, TRACE_REG_PERF_ADD, p_event)) {
struct hlist_head __percpu *pcpu_list;
struct hlist_head *list;
pcpu_list = tp_event->perf_events;
if (WARN_ON_ONCE(!pcpu_list))
return -EINVAL;
list = this_cpu_ptr(pcpu_list);
hlist_add_head_rcu(&p_event->hlist_entry, list);
}
return 0;
}
2010-06-16 12:37:10 +00:00
void perf_trace_del(struct perf_event *p_event, int flags)
{
struct trace_event_call *tp_event = p_event->tp_event;
/*
* If TRACE_REG_PERF_DEL returns false; no custom action was performed
* and we need to take the default action of dequeueing our event from
* the right per-cpu hlist.
*/
if (!tp_event->class->reg(tp_event, TRACE_REG_PERF_DEL, p_event))
hlist_del_rcu(&p_event->hlist_entry);
}
void *perf_trace_buf_alloc(int size, struct pt_regs **regs, int *rctxp)
{
char *raw_data;
int rctx;
BUILD_BUG_ON(PERF_MAX_TRACE_SIZE % sizeof(unsigned long));
if (WARN_ONCE(size > PERF_MAX_TRACE_SIZE,
"perf buffer not large enough, wanted %d, have %d",
size, PERF_MAX_TRACE_SIZE))
return NULL;
*rctxp = rctx = perf_swevent_get_recursion_context();
if (rctx < 0)
return NULL;
perf: Avoid horrible stack usage Both Linus (most recent) and Steve (a while ago) reported that perf related callbacks have massive stack bloat. The problem is that software events need a pt_regs in order to properly report the event location and unwind stack. And because we could not assume one was present we allocated one on stack and filled it with minimal bits required for operation. Now, pt_regs is quite large, so this is undesirable. Furthermore it turns out that most sites actually have a pt_regs pointer available, making this even more onerous, as the stack space is pointless waste. This patch addresses the problem by observing that software events have well defined nesting semantics, therefore we can use static per-cpu storage instead of on-stack. Linus made the further observation that all but the scheduler callers of perf_sw_event() have a pt_regs available, so we change the regular perf_sw_event() to require a valid pt_regs (where it used to be optional) and add perf_sw_event_sched() for the scheduler. We have a scheduler specific call instead of a more generic _noregs() like construct because we can assume non-recursion from the scheduler and thereby simplify the code further (_noregs would have to put the recursion context call inline in order to assertain which __perf_regs element to use). One last note on the implementation of perf_trace_buf_prepare(); we allow .regs = NULL for those cases where we already have a pt_regs pointer available and do not need another. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Javi Merino <javi.merino@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-16 11:47:34 +00:00
if (regs)
*regs = this_cpu_ptr(&__perf_regs[rctx]);
raw_data = this_cpu_ptr(perf_trace_buf[rctx]);
/* zero the dead bytes from align to not leak stack to user */
memset(&raw_data[size - sizeof(u64)], 0, sizeof(u64));
return raw_data;
}
EXPORT_SYMBOL_GPL(perf_trace_buf_alloc);
NOKPROBE_SYMBOL(perf_trace_buf_alloc);
void perf_trace_buf_update(void *record, u16 type)
{
struct trace_entry *entry = record;
tracing: Merge irqflags + preempt counter. The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-25 19:45:08 +00:00
tracing_generic_entry_update(entry, type, tracing_gen_ctx());
}
NOKPROBE_SYMBOL(perf_trace_buf_update);
#ifdef CONFIG_FUNCTION_TRACER
static void
perf_ftrace_function_call(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *ops, struct ftrace_regs *fregs)
{
struct ftrace_entry *entry;
struct perf_event *event;
struct hlist_head head;
struct pt_regs regs;
int rctx;
int bit;
if (!rcu_is_watching())
return;
ftrace: Add recording of functions that caused recursion This adds CONFIG_FTRACE_RECORD_RECURSION that will record to a file "recursed_functions" all the functions that caused recursion while a callback to the function tracer was running. Link: https://lkml.kernel.org/r/20201106023548.102375687@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Guo Ren <guoren@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-csky@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: live-patching@vger.kernel.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 02:32:46 +00:00
bit = ftrace_test_recursion_trylock(ip, parent_ip);
if (bit < 0)
return;
ftrace: do CPU checking after preemption disabled With CONFIG_DEBUG_PREEMPT we observed reports like: BUG: using smp_processor_id() in preemptible caller is perf_ftrace_function_call+0x6f/0x2e0 CPU: 1 PID: 680 Comm: a.out Not tainted Call Trace: <TASK> dump_stack_lvl+0x8d/0xcf check_preemption_disabled+0x104/0x110 ? optimize_nops.isra.7+0x230/0x230 ? text_poke_bp_batch+0x9f/0x310 perf_ftrace_function_call+0x6f/0x2e0 ... __text_poke+0x5/0x620 text_poke_bp_batch+0x9f/0x310 This telling us the CPU could be changed after task is preempted, and the checking on CPU before preemption will be invalid. Since now ftrace_test_recursion_trylock() will help to disable the preemption, this patch just do the checking after trylock() to address the issue. Link: https://lkml.kernel.org/r/54880691-5fe2-33e7-d12f-1fa6136f5183@linux.alibaba.com CC: Steven Rostedt <rostedt@goodmis.org> Cc: Guo Ren <guoren@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Jisheng Zhang <jszhang@kernel.org> Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-27 03:15:11 +00:00
if ((unsigned long)ops->private != smp_processor_id())
goto out;
event = container_of(ops, struct perf_event, ftrace_ops);
/*
* @event->hlist entry is NULL (per INIT_HLIST_NODE), and all
* the perf code does is hlist_for_each_entry_rcu(), so we can
* get away with simply setting the @head.first pointer in order
* to create a singular list.
*/
head.first = &event->hlist_entry;
#define ENTRY_SIZE (ALIGN(sizeof(struct ftrace_entry) + sizeof(u32), \
sizeof(u64)) - sizeof(u32))
BUILD_BUG_ON(ENTRY_SIZE > PERF_MAX_TRACE_SIZE);
memset(&regs, 0, sizeof(regs));
perf_fetch_caller_regs(&regs);
entry = perf_trace_buf_alloc(ENTRY_SIZE, NULL, &rctx);
if (!entry)
goto out;
entry->ip = ip;
entry->parent_ip = parent_ip;
perf_trace_buf_submit(entry, ENTRY_SIZE, rctx, TRACE_FN,
1, &regs, &head, NULL);
out:
ftrace_test_recursion_unlock(bit);
#undef ENTRY_SIZE
}
static int perf_ftrace_function_register(struct perf_event *event)
{
struct ftrace_ops *ops = &event->ftrace_ops;
ops->func = perf_ftrace_function_call;
ops->private = (void *)(unsigned long)nr_cpu_ids;
return register_ftrace_function(ops);
}
static int perf_ftrace_function_unregister(struct perf_event *event)
{
struct ftrace_ops *ops = &event->ftrace_ops;
ftrace, perf: Add filter support for function trace event Adding support to filter function trace event via perf interface. It is now possible to use filter interface in the perf tool like: perf record -e ftrace:function --filter="(ip == mm_*)" ls The filter syntax is restricted to the the 'ip' field only, and following operators are accepted '==' '!=' '||', ending up with the filter strings like: ip == f1[, ]f2 ... || ip != f3[, ]f4 ... with comma ',' or space ' ' as a function separator. If the space ' ' is used as a separator, the right side of the assignment needs to be enclosed in double quotes '"', e.g.: perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls The '==' operator adds trace filter with same effect as would be added via set_ftrace_filter file. The '!=' operator adds trace filter with same effect as would be added via set_ftrace_notrace file. The right side of the '!=', '==' operators is list of functions or regexp. to be added to filter separated by space. The '||' operator is used for connecting multiple filter definitions together. It is possible to have more than one '==' and '!=' operators within one filter string. Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-15 14:51:54 +00:00
int ret = unregister_ftrace_function(ops);
ftrace_free_filter(ops);
return ret;
}
int perf_ftrace_event_register(struct trace_event_call *call,
enum trace_reg type, void *data)
{
struct perf_event *event = data;
switch (type) {
case TRACE_REG_REGISTER:
case TRACE_REG_UNREGISTER:
break;
case TRACE_REG_PERF_REGISTER:
case TRACE_REG_PERF_UNREGISTER:
return 0;
case TRACE_REG_PERF_OPEN:
return perf_ftrace_function_register(data);
case TRACE_REG_PERF_CLOSE:
return perf_ftrace_function_unregister(data);
case TRACE_REG_PERF_ADD:
event->ftrace_ops.private = (void *)(unsigned long)smp_processor_id();
return 1;
case TRACE_REG_PERF_DEL:
event->ftrace_ops.private = (void *)(unsigned long)nr_cpu_ids;
return 1;
}
return -EINVAL;
}
#endif /* CONFIG_FUNCTION_TRACER */