linux/include/xen/swiotlb-xen.h

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_SWIOTLB_XEN_H
#define __LINUX_SWIOTLB_XEN_H

#include <linux/swiotlb.h>

void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
		phys_addr_t paddr, size_t size, enum dma_data_direction dir);
void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,
		phys_addr_t paddr, size_t size, enum dma_data_direction dir);

extern int xen_swiotlb_init(int verbose, bool early);
extern const struct dma_map_ops xen_swiotlb_dma_ops;

#endif /* __LINUX_SWIOTLB_XEN_H */
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a /uapi/ one with no licensing information in it, - file was a /uapi/ one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non /uapi/ files that summary was: SPDX license identifier # files ---------------------------------------------------\|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a /uapi/ path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------\|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the /uapi/ ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------\|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-11-01 14:07:57 +00:00			`/* SPDX-License-Identifier: GPL-2.0 */`
swiotlb-xen: SWIOTLB library for Xen PV guest with PCI passthrough. This patchset: PV guests under Xen are running in an non-contiguous memory architecture. When PCI pass-through is utilized, this necessitates an IOMMU for translating bus (DMA) to virtual and vice-versa and also providing a mechanism to have contiguous pages for device drivers operations (say DMA operations). Specifically, under Xen the Linux idea of pages is an illusion. It assumes that pages start at zero and go up to the available memory. To help with that, the Linux Xen MMU provides a lookup mechanism to translate the page frame numbers (PFN) to machine frame numbers (MFN) and vice-versa. The MFN are the "real" frame numbers. Furthermore memory is not contiguous. Xen hypervisor stitches memory for guests from different pools, which means there is no guarantee that PFN==MFN and PFN+1==MFN+1. Lastly with Xen 4.0, pages (in debug mode) are allocated in descending order (high to low), meaning the guest might never get any MFN's under the 4GB mark. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Albert Herranz <albert_herranz@yahoo.es> Cc: Ian Campbell <Ian.Campbell@citrix.com> 2010-05-11 14:05:49 +00:00			`#ifndef __LINUX_SWIOTLB_XEN_H`
			`#define __LINUX_SWIOTLB_XEN_H`

			`#include <linux/swiotlb.h>`

swiotlb-xen: simplify cache maintainance Now that we know we always have the dma-noncoherent.h helpers available if we are on an architecture with support for non-coherent devices, we can just call them directly, and remove the calls to the dma-direct routines, including the fact that we call the dma_direct_map_page routines but ignore the value returned from it. Instead we now have Xen wrappers for the arch_sync_dma_for_{device,cpu} helpers that call the special Xen versions of those routines for foreign pages. Note that the new helpers get the physical address passed in addition to the dma address to avoid another translation for the local cache maintainance. The pfn_valid checks remain on the dma address as in the old code, even if that looks a little funny. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 2019-09-05 08:04:30 +00:00			`void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,`
			`phys_addr_t paddr, size_t size, enum dma_data_direction dir);`
			`void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,`
			`phys_addr_t paddr, size_t size, enum dma_data_direction dir);`

xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used. With this patch we provide the functionality to initialize the Xen-SWIOTLB late in the bootup cycle - specifically for Xen PCI-frontend. We still will work if the user had supplied 'iommu=soft' on the Linux command line. Note: We cannot depend on after_bootmem to automatically determine whether this is early or not. This is because when PCI IOMMUs are initialized it is after after_bootmem but before a lot of "other" subsystems are initialized. CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [v1: Fix smatch warnings] [v2: Added check for xen_swiotlb] [v3: Rebased with new xen-swiotlb changes] [v4: squashed xen/swiotlb: Depending on after_bootmem is not correct in] Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 2012-08-23 18:36:15 +00:00			`extern int xen_swiotlb_init(int verbose, bool early);`
xen-swiotlb: consolidate xen_swiotlb_dma_ops ARM and x86 had duplicated versions of the dma_ops structure, the only difference is that x86 hasn't wired up the set_dma_mask, mmap, and get_sgtable ops yet. On x86 all of them are identical to the generic version, so they aren't needed but harmless. All the symbols used only for xen_swiotlb_dma_ops can now be marked static as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 2017-05-21 11:15:13 +00:00			`extern const struct dma_map_ops xen_swiotlb_dma_ops;`
swiotlb-xen: SWIOTLB library for Xen PV guest with PCI passthrough. This patchset: PV guests under Xen are running in an non-contiguous memory architecture. When PCI pass-through is utilized, this necessitates an IOMMU for translating bus (DMA) to virtual and vice-versa and also providing a mechanism to have contiguous pages for device drivers operations (say DMA operations). Specifically, under Xen the Linux idea of pages is an illusion. It assumes that pages start at zero and go up to the available memory. To help with that, the Linux Xen MMU provides a lookup mechanism to translate the page frame numbers (PFN) to machine frame numbers (MFN) and vice-versa. The MFN are the "real" frame numbers. Furthermore memory is not contiguous. Xen hypervisor stitches memory for guests from different pools, which means there is no guarantee that PFN==MFN and PFN+1==MFN+1. Lastly with Xen 4.0, pages (in debug mode) are allocated in descending order (high to low), meaning the guest might never get any MFN's under the 4GB mark. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Albert Herranz <albert_herranz@yahoo.es> Cc: Ian Campbell <Ian.Campbell@citrix.com> 2010-05-11 14:05:49 +00:00
			`#endif /* __LINUX_SWIOTLB_XEN_H */`