linux/mm/migrate.c

2641 lines
71 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Memory Migration functionality - linux/mm/migrate.c
*
* Copyright (C) 2006 Silicon Graphics, Inc., Christoph Lameter
*
* Page migration was first developed in the context of the memory hotplug
* project. The main authors of the migration code are:
*
* IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
* Hirokazu Takahashi <taka@valinux.co.jp>
* Dave Hansen <haveblue@us.ibm.com>
* Christoph Lameter
*/
#include <linux/migrate.h>
#include <linux/export.h>
#include <linux/swap.h>
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
#include <linux/swapops.h>
#include <linux/pagemap.h>
#include <linux/buffer_head.h>
#include <linux/mm_inline.h>
#include <linux/nsproxy.h>
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
#include <linux/ksm.h>
#include <linux/rmap.h>
#include <linux/topology.h>
#include <linux/cpu.h>
#include <linux/cpuset.h>
#include <linux/writeback.h>
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
#include <linux/mempolicy.h>
#include <linux/vmalloc.h>
#include <linux/security.h>
mm: migrate dirty page without clear_page_dirty_for_io etc clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:05 +00:00
#include <linux/backing-dev.h>
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
#include <linux/compaction.h>
#include <linux/syscalls.h>
#include <linux/compat.h>
#include <linux/hugetlb.h>
#include <linux/hugetlb_cgroup.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
#include <linux/pfn_t.h>
#include <linux/memremap.h>
#include <linux/userfaultfd_k.h>
#include <linux/balloon_compaction.h>
mm: introduce idle page tracking Knowing the portion of memory that is not used by a certain application or memory cgroup (idle memory) can be useful for partitioning the system efficiently, e.g. by setting memory cgroup limits appropriately. Currently, the only means to estimate the amount of idle memory provided by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the access bit for all pages mapped to a particular process by writing 1 to clear_refs, wait for some time, and then count smaps:Referenced. However, this method has two serious shortcomings: - it does not count unmapped file pages - it affects the reclaimer logic To overcome these drawbacks, this patch introduces two new page flags, Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap. A page's Idle flag can only be set from userspace by setting bit in /sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page, and it is cleared whenever the page is accessed either through page tables (it is cleared in page_referenced() in this case) or using the read(2) system call (mark_page_accessed()). Thus by setting the Idle flag for pages of a particular workload, which can be found e.g. by reading /proc/PID/pagemap, waiting for some time to let the workload access its working set, and then reading the bitmap file, one can estimate the amount of pages that are not used by the workload. The Young page flag is used to avoid interference with the memory reclaimer. A page's Young flag is set whenever the Access bit of a page table entry pointing to the page is cleared by writing to the bitmap file. If page_referenced() is called on a Young page, it will add 1 to its return value, therefore concealing the fact that the Access bit was cleared. Note, since there is no room for extra page flags on 32 bit, this feature uses extended page flags when compiled on 32 bit. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: kpageidle requires an MMU] [akpm@linux-foundation.org: decouple from page-flags rework] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 22:35:45 +00:00
#include <linux/page_idle.h>
#include <linux/page_owner.h>
#include <linux/sched/mm.h>
#include <linux/ptrace.h>
#include <linux/oom.h>
mm/migrate: update node demotion order on hotplug events Reclaim-based migration is attempting to optimize data placement in memory based on the system topology. If the system changes, so must the migration ordering. The implementation is conceptually simple and entirely unoptimized. On any memory or CPU hotplug events, assume that a node was added or removed and recalculate all migration targets. This ensures that the node_demotion[] array is always ready to be used in case the new reclaim mode is enabled. This recalculation is far from optimal, most glaringly that it does not even attempt to figure out the hotplug event would have some *actual* effect on the demotion order. But, given the expected paucity of hotplug events, this should be fine. Link: https://lkml.kernel.org/r/20210721063926.3024591-2-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-3-ying.huang@intel.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-02 21:59:09 +00:00
#include <linux/memory.h>
mm: migrate: support multiple target nodes demotion We have some machines with multiple memory types like below, which have one fast (DRAM) memory node and two slow (persistent memory) memory nodes. According to current node demotion policy, if node 0 fills up, its memory should be migrated to node 1, when node 1 fills up, its memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop. But this is not efficient and suitbale memory migration route for our machine with multiple slow memory nodes. Since the distance between node 0 to node 1 and node 0 to node 2 is equal, and memory migration between slow memory nodes will increase persistent memory bandwidth greatly, which will hurt the whole system's performance. Thus for this case, we can treat the slow memory node 1 and node 2 as a whole slow memory region, and we should migrate memory from node 0 to node 1 and node 2 if node 0 fills up. This patch changes the node_demotion data structure to support multiple target nodes, and establishes the migration path to support multiple target nodes with validating if the node distance is the best or not. available: 3 nodes (0-2) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 node 0 size: 62153 MB node 0 free: 55135 MB node 1 cpus: node 1 size: 127007 MB node 1 free: 126930 MB node 2 cpus: node 2 size: 126968 MB node 2 free: 126878 MB node distances: node 0 1 2 0: 10 20 20 1: 20 10 20 2: 20 20 10 Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Xunlei Pang <xlpang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:08:43 +00:00
#include <linux/random.h>
NUMA balancing: optimize page placement for memory tiering system With the advent of various new memory types, some machines will have multiple types of memory, e.g. DRAM and PMEM (persistent memory). The memory subsystem of these machines can be called memory tiering system, because the performance of the different types of memory are usually different. In such system, because of the memory accessing pattern changing etc, some pages in the slow memory may become hot globally. So in this patch, the NUMA balancing mechanism is enhanced to optimize the page placement among the different memory types according to hot/cold dynamically. In a typical memory tiering system, there are CPUs, fast memory and slow memory in each physical NUMA node. The CPUs and the fast memory will be put in one logical node (called fast memory node), while the slow memory will be put in another (faked) logical node (called slow memory node). That is, the fast memory is regarded as local while the slow memory is regarded as remote. So it's possible for the recently accessed pages in the slow memory node to be promoted to the fast memory node via the existing NUMA balancing mechanism. The original NUMA balancing mechanism will stop to migrate pages if the free memory of the target node becomes below the high watermark. This is a reasonable policy if there's only one memory type. But this makes the original NUMA balancing mechanism almost do not work to optimize page placement among different memory types. Details are as follows. It's the common cases that the working-set size of the workload is larger than the size of the fast memory nodes. Otherwise, it's unnecessary to use the slow memory at all. So, there are almost always no enough free pages in the fast memory nodes, so that the globally hot pages in the slow memory node cannot be promoted to the fast memory node. To solve the issue, we have 2 choices as follows, a. Ignore the free pages watermark checking when promoting hot pages from the slow memory node to the fast memory node. This will create some memory pressure in the fast memory node, thus trigger the memory reclaiming. So that, the cold pages in the fast memory node will be demoted to the slow memory node. b. Define a new watermark called wmark_promo which is higher than wmark_high, and have kswapd reclaiming pages until free pages reach such watermark. The scenario is as follows: when we want to promote hot-pages from a slow memory to a fast memory, but fast memory's free pages would go lower than high watermark with such promotion, we wake up kswapd with wmark_promo watermark in order to demote cold pages and free us up some space. So, next time we want to promote hot-pages we might have a chance of doing so. The choice "a" may create high memory pressure in the fast memory node. If the memory pressure of the workload is high, the memory pressure may become so high that the memory allocation latency of the workload is influenced, e.g. the direct reclaiming may be triggered. The choice "b" works much better at this aspect. If the memory pressure of the workload is high, the hot pages promotion will stop earlier because its allocation watermark is higher than that of the normal memory allocation. So in this patch, choice "b" is implemented. A new zone watermark (WMARK_PROMO) is added. Which is larger than the high watermark and can be controlled via watermark_scale_factor. In addition to the original page placement optimization among sockets, the NUMA balancing mechanism is extended to be used to optimize page placement according to hot/cold among different memory types. So the sysctl user space interface (numa_balancing) is extended in a backward compatible way as follow, so that the users can enable/disable these functionality individually. The sysctl is converted from a Boolean value to a bits field. The definition of the flags is, - 0: NUMA_BALANCING_DISABLED - 1: NUMA_BALANCING_NORMAL - 2: NUMA_BALANCING_MEMORY_TIERING We have tested the patch with the pmbench memory accessing benchmark with the 80:20 read/write ratio and the Gauss access address distribution on a 2 socket Intel server with Optane DC Persistent Memory Model. The test results shows that the pmbench score can improve up to 95.9%. Thanks Andrew Morton to help fix the document format error. Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:23 +00:00
#include <linux/sched/sysctl.h>
mm/demotion: update node_is_toptier to work with memory tiers With memory tier support we can have memory only NUMA nodes in the top tier from which we want to avoid promotion tracking NUMA faults. Update node_is_toptier to work with memory tiers. All NUMA nodes are by default top tier nodes. With lower(slower) memory tiers added we consider all memory tiers above a memory tier having CPU NUMA nodes as a top memory tier [sj@kernel.org: include missed header file, memory-tiers.h] Link: https://lkml.kernel.org/r/20220820190720.248704-1-sj@kernel.org [akpm@linux-foundation.org: mm/memory.c needs linux/memory-tiers.h] [aneesh.kumar@linux.ibm.com: make toptier_distance inclusive upper bound of toptiers] Link: https://lkml.kernel.org/r/20220830081457.118960-1-aneesh.kumar@linux.ibm.com Link: https://lkml.kernel.org/r/20220818131042.113280-10-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Wei Xu <weixugc@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Bharata B Rao <bharata@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hesham Almatary <hesham.almatary@huawei.com> Cc: Jagdish Gediya <jvgediya.oss@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-18 13:10:41 +00:00
#include <linux/memory-tiers.h>
mm/migrate: convert do_pages_stat_array() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference just to read the nid and get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). Note that the other errors (-EACCESS, -EBUSY, -EIO, -EINVAL, -ENOMEM) so far only applied when actually moving pages, not when only querying stats. We'll effectively drop the "secretmem" check we had in follow_page(), but that shouldn't really matter here, we're not accessing folio/page content after all. Link: https://lkml.kernel.org/r/20240802155524.517137-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:16 +00:00
#include <linux/pagewalk.h>
#include <asm/tlbflush.h>
#include <trace/events/migrate.h>
#include "internal.h"
bool isolate_movable_page(struct page *page, isolate_mode_t mode)
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
{
struct folio *folio = folio_get_nontail_page(page);
const struct movable_operations *mops;
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
/*
* Avoid burning cycles with pages that are yet under __free_pages(),
* or just got freed under us.
*
* In case we 'win' a race for a movable page being freed under us and
* raise its refcount preventing __free_pages() from doing its job
* the put_page() at the end of this block will take care of
* release this page, thus avoiding a nasty leakage.
*/
if (!folio)
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
goto out;
if (unlikely(folio_test_slab(folio)))
goto out_putfolio;
/* Pairs with smp_wmb() in slab freeing, e.g. SLUB's __free_slab() */
smp_rmb();
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
/*
* Check movable flag before taking the page lock because
* we use non-atomic bitops on newly allocated page flags so
* unconditionally grabbing the lock ruins page's owner side.
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
*/
if (unlikely(!__folio_test_movable(folio)))
goto out_putfolio;
/* Pairs with smp_wmb() in slab allocation, e.g. SLUB's alloc_slab_page() */
smp_rmb();
if (unlikely(folio_test_slab(folio)))
goto out_putfolio;
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
/*
* As movable pages are not isolated from LRU lists, concurrent
* compaction threads can race against page migration functions
* as well as race against the releasing a page.
*
* In order to avoid having an already isolated movable page
* being (wrongly) re-isolated while it is under migration,
* or to avoid attempting to isolate pages being released,
* lets be sure we have the page lock
* before proceeding with the movable page isolation steps.
*/
if (unlikely(!folio_trylock(folio)))
goto out_putfolio;
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
if (!folio_test_movable(folio) || folio_test_isolated(folio))
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
goto out_no_isolated;
mops = folio_movable_ops(folio);
VM_BUG_ON_FOLIO(!mops, folio);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
if (!mops->isolate_page(&folio->page, mode))
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
goto out_no_isolated;
/* Driver shouldn't use the isolated flag */
WARN_ON_ONCE(folio_test_isolated(folio));
folio_set_isolated(folio);
folio_unlock(folio);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
return true;
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
out_no_isolated:
folio_unlock(folio);
out_putfolio:
folio_put(folio);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
out:
return false;
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
}
static void putback_movable_folio(struct folio *folio)
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
{
const struct movable_operations *mops = folio_movable_ops(folio);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
mops->putback_page(&folio->page);
folio_clear_isolated(folio);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
}
/*
* Put previously isolated pages back onto the appropriate lists
* from where they were once taken off for compaction/migration.
*
* This function shall be used whenever the isolated pageset has been
* built from lru, balloon, hugetlbfs page. See isolate_migratepages_range()
* and isolate_hugetlb().
*/
void putback_movable_pages(struct list_head *l)
{
struct folio *folio;
struct folio *folio2;
list_for_each_entry_safe(folio, folio2, l, lru) {
if (unlikely(folio_test_hugetlb(folio))) {
folio_putback_active_hugetlb(folio);
mm: migrate: make core migration code aware of hugepage Currently hugepage migration is available only for soft offlining, but it's also useful for some other users of page migration (clearly because users of hugepage can enjoy the benefit of mempolicy and memory hotplug.) So this patchset tries to extend such users to support hugepage migration. The target of this patchset is to enable hugepage migration for NUMA related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and memory hotplug. This patchset does not add hugepage migration for memory compaction, because users of memory compaction mainly expect to construct thp by arranging raw pages, and there's little or no need to compact hugepages. CMA, another user of page migration, can have benefit from hugepage migration, but is not enabled to support it for now (just because of lack of testing and expertise in CMA.) Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in x86_64, or hugepages in architectures like ia64) is not enabled for now (again, because of lack of testing.) As for how these are achived, I extended the API (migrate_pages()) to handle hugepage (with patch 1 and 2) and adjusted code of each caller to check and collect movable hugepages (with patch 3-7). Remaining 2 patches are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is about making sure that we only migrate pmd-based hugepages. And patch 9 is about choosing appropriate zone for hugepage allocation. My test is mainly functional one, simply kicking hugepage migration via each entry point and confirm that migration is done correctly. Test code is available here: git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git And I always run libhugetlbfs test when changing hugetlbfs's code. With this patchset, no regression was found in the test. This patch (of 9): Before enabling each user of page migration to support hugepage, this patch enables the list of pages for migration to link not only LRU pages, but also hugepages. As a result, putback_movable_pages() and migrate_pages() can handle both of LRU pages and hugepages. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: Hillf Danton <dhillf@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 21:21:59 +00:00
continue;
}
list_del(&folio->lru);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
/*
* We isolated non-lru movable folio so here we can use
* __folio_test_movable because LRU folio's mapping cannot
* have PAGE_MAPPING_MOVABLE.
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
*/
if (unlikely(__folio_test_movable(folio))) {
VM_BUG_ON_FOLIO(!folio_test_isolated(folio), folio);
folio_lock(folio);
if (folio_test_movable(folio))
putback_movable_folio(folio);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
else
folio_clear_isolated(folio);
folio_unlock(folio);
folio_put(folio);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
} else {
node_stat_mod_folio(folio, NR_ISOLATED_ANON +
folio_is_file_lru(folio), -folio_nr_pages(folio));
folio_putback_lru(folio);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
}
}
}
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
/*
* Restore a potential migration pte to a working pte entry
*/
static bool remove_migration_pte(struct folio *folio,
struct vm_area_struct *vma, unsigned long addr, void *old)
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
{
DEFINE_FOLIO_VMA_WALK(pvmw, old, vma, addr, PVMW_SYNC | PVMW_MIGRATION);
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
while (page_vma_mapped_walk(&pvmw)) {
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
rmap_t rmap_flags = RMAP_NONE;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte_t old_pte;
pte_t pte;
swp_entry_t entry;
struct page *new;
unsigned long idx = 0;
/* pgoff is invalid for ksm pages, but they are never large */
if (folio_test_large(folio) && !folio_test_hugetlb(folio))
idx = linear_page_index(vma, pvmw.address) - pvmw.pgoff;
new = folio_page(folio, idx);
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
mm: thp: enable thp migration in generic path Add thp migration's core code, including conversions between a PMD entry and a swap entry, setting PMD migration entry, removing PMD migration entry, and waiting on PMD migration entries. This patch makes it possible to support thp migration. If you fail to allocate a destination page as a thp, you just split the source thp as we do now, and then enter the normal page migration. If you succeed to allocate destination thp, you enter thp migration. Subsequent patches actually enable thp migration for each caller of page migration by allowing its get_new_page() callback to allocate thps. [zi.yan@cs.rutgers.edu: fix gcc-4.9.0 -Wmissing-braces warning] Link: http://lkml.kernel.org/r/A0ABA698-7486-46C3-B209-E95A9048B22C@cs.rutgers.edu [akpm@linux-foundation.org: fix x86_64 allnoconfig warning] Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:10:57 +00:00
#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
/* PMD-mapped THP migration entry */
if (!pvmw.pte) {
VM_BUG_ON_FOLIO(folio_test_hugetlb(folio) ||
!folio_test_pmd_mappable(folio), folio);
mm: thp: enable thp migration in generic path Add thp migration's core code, including conversions between a PMD entry and a swap entry, setting PMD migration entry, removing PMD migration entry, and waiting on PMD migration entries. This patch makes it possible to support thp migration. If you fail to allocate a destination page as a thp, you just split the source thp as we do now, and then enter the normal page migration. If you succeed to allocate destination thp, you enter thp migration. Subsequent patches actually enable thp migration for each caller of page migration by allowing its get_new_page() callback to allocate thps. [zi.yan@cs.rutgers.edu: fix gcc-4.9.0 -Wmissing-braces warning] Link: http://lkml.kernel.org/r/A0ABA698-7486-46C3-B209-E95A9048B22C@cs.rutgers.edu [akpm@linux-foundation.org: fix x86_64 allnoconfig warning] Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:10:57 +00:00
remove_migration_pmd(&pvmw, new);
continue;
}
#endif
folio_get(folio);
mm: remember young/dirty bit for page migrations When page migration happens, we always ignore the young/dirty bit settings in the old pgtable, and marking the page as old in the new page table using either pte_mkold() or pmd_mkold(), and keeping the pte clean. That's fine from functional-wise, but that's not friendly to page reclaim because the moving page can be actively accessed within the procedure. Not to mention hardware setting the young bit can bring quite some overhead on some systems, e.g. x86_64 needs a few hundreds nanoseconds to set the bit. The same slowdown problem to dirty bits when the memory is first written after page migration happened. Actually we can easily remember the A/D bit configuration and recover the information after the page is migrated. To achieve it, define a new set of bits in the migration swap offset field to cache the A/D bits for old pte. Then when removing/recovering the migration entry, we can recover the A/D bits even if the page changed. One thing to mention is that here we used max_swapfile_size() to detect how many swp offset bits we have, and we'll only enable this feature if we know the swp offset is big enough to store both the PFN value and the A/D bits. Otherwise the A/D bits are dropped like before. Link: https://lkml.kernel.org/r/20220811161331.37055-6-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 16:13:29 +00:00
pte = mk_pte(new, READ_ONCE(vma->vm_page_prot));
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
old_pte = ptep_get(pvmw.pte);
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
entry = pte_to_swp_entry(old_pte);
mm: remember young/dirty bit for page migrations When page migration happens, we always ignore the young/dirty bit settings in the old pgtable, and marking the page as old in the new page table using either pte_mkold() or pmd_mkold(), and keeping the pte clean. That's fine from functional-wise, but that's not friendly to page reclaim because the moving page can be actively accessed within the procedure. Not to mention hardware setting the young bit can bring quite some overhead on some systems, e.g. x86_64 needs a few hundreds nanoseconds to set the bit. The same slowdown problem to dirty bits when the memory is first written after page migration happened. Actually we can easily remember the A/D bit configuration and recover the information after the page is migrated. To achieve it, define a new set of bits in the migration swap offset field to cache the A/D bits for old pte. Then when removing/recovering the migration entry, we can recover the A/D bits even if the page changed. One thing to mention is that here we used max_swapfile_size() to detect how many swp offset bits we have, and we'll only enable this feature if we know the swp offset is big enough to store both the PFN value and the A/D bits. Otherwise the A/D bits are dropped like before. Link: https://lkml.kernel.org/r/20220811161331.37055-6-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 16:13:29 +00:00
if (!is_migration_entry_young(entry))
pte = pte_mkold(pte);
if (folio_test_dirty(folio) && is_migration_entry_dirty(entry))
pte = pte_mkdirty(pte);
if (pte_swp_soft_dirty(old_pte))
pte = pte_mksoft_dirty(pte);
else
pte = pte_clear_soft_dirty(pte);
if (is_writable_migration_entry(entry))
mm: Make pte_mkwrite() take a VMA The x86 Shadow stack feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly. One of these unusual properties is that shadow stack memory is writable, but only in limited ways. These limits are applied via a specific PTE bit combination. Nevertheless, the memory is writable, and core mm code will need to apply the writable permissions in the typical paths that call pte_mkwrite(). Future patches will make pte_mkwrite() take a VMA, so that the x86 implementation of it can know whether to create regular writable or shadow stack mappings. But there are a couple of challenges to this. Modifying the signatures of each arch pte_mkwrite() implementation would be error prone because some are generated with macros and would need to be re-implemented. Also, some pte_mkwrite() callers operate on kernel memory without a VMA. So this can be done in a three step process. First pte_mkwrite() can be renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite() added that just calls pte_mkwrite_novma(). Next callers without a VMA can be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers can be changed to take/pass a VMA. Previous work pte_mkwrite() renamed pte_mkwrite_novma() and converted callers that don't have a VMA were to use pte_mkwrite_novma(). So now change pte_mkwrite() to take a VMA and change the remaining callers to pass a VMA. Apply the same changes for pmd_mkwrite(). No functional change. Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/all/20230613001108.3040476-4-rick.p.edgecombe%40intel.com
2023-06-13 00:10:29 +00:00
pte = pte_mkwrite(pte, vma);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
else if (pte_swp_uffd_wp(old_pte))
userfaultfd: wp: support swap and page migration For either swap and page migration, we all use the bit 2 of the entry to identify whether this entry is uffd write-protected. It plays a similar role as the existing soft dirty bit in swap entries but only for keeping the uffd-wp tracking for a specific PTE/PMD. Something special here is that when we want to recover the uffd-wp bit from a swap/migration entry to the PTE bit we'll also need to take care of the _PAGE_RW bit and make sure it's cleared, otherwise even with the _PAGE_UFFD_WP bit we can't trap it at all. In change_pte_range() we do nothing for uffd if the PTE is a swap entry. That can lead to data mismatch if the page that we are going to write protect is swapped out when sending the UFFDIO_WRITEPROTECT. This patch also applies/removes the uffd-wp bit even for the swap entries. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-11-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:06:01 +00:00
pte = pte_mkuffd_wp(pte);
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
if (folio_test_anon(folio) && !is_readable_migration_entry(entry))
rmap_flags |= RMAP_EXCLUSIVE;
if (unlikely(is_device_private_page(new))) {
if (pte_write(pte))
entry = make_writable_device_private_entry(
page_to_pfn(new));
else
entry = make_readable_device_private_entry(
page_to_pfn(new));
pte = swp_entry_to_pte(entry);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_swp_soft_dirty(old_pte))
pte = pte_swp_mksoft_dirty(pte);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (pte_swp_uffd_wp(old_pte))
pte = pte_swp_mkuffd_wp(pte);
mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate Our MIPS 1004Kc SoCs were seeing random userspace crashes with SIGILL and SIGSEGV that could not be traced back to a userspace code bug. They had all the magic signs of an I/D cache coherency issue. Now recently we noticed that the /proc/sys/vm/compact_memory interface was quite efficient at provoking this class of userspace crashes. Studying the code in mm/migrate.c there is a distinction made between migrating a page that is mapped at the instant of migration and one that is not mapped. Our problem turned out to be the non-mapped pages. For the non-mapped page the code performs a copy of the page content and all relevant meta-data of the page without doing the required D-cache maintenance. This leaves dirty data in the D-cache of the CPU and on the 1004K cores this data is not visible to the I-cache. A subsequent page-fault that triggers a mapping of the page will happily serve the process with potentially stale code. What about ARM then, this bug should have seen greater exposure? Well ARM became immune to this flaw back in 2010, see commit c01778001a4f ("ARM: 6379/1: Assume new page cache pages have dirty D-cache"). My proposed fix moves the D-cache maintenance inside move_to_new_page to make it common for both cases. Link: http://lkml.kernel.org/r/20190315083502.11849-1-larper@axis.com Fixes: 97ee0524614 ("flush cache before installing new page at migraton") Signed-off-by: Lars Persson <larper@axis.com> Reviewed-by: Paul Burton <paul.burton@mips.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29 03:44:28 +00:00
}
#ifdef CONFIG_HUGETLB_PAGE
if (folio_test_hugetlb(folio)) {
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
struct hstate *h = hstate_vma(vma);
unsigned int shift = huge_page_shift(h);
unsigned long psize = huge_page_size(h);
mm/hugetlb: change parameters of arch_make_huge_pte() Patch series "Subject: [PATCH v2 0/5] Implement huge VMAP and VMALLOC on powerpc 8xx", v2. This series implements huge VMAP and VMALLOC on powerpc 8xx. Powerpc 8xx has 4 page sizes: - 4k - 16k - 512k - 8M At the time being, vmalloc and vmap only support huge pages which are leaf at PMD level. Here the PMD level is 4M, it doesn't correspond to any supported page size. For now, implement use of 16k and 512k pages which is done at PTE level. Support of 8M pages will be implemented later, it requires use of hugepd tables. To allow this, the architecture provides two functions: - arch_vmap_pte_range_map_size() which tells vmap_pte_range() what page size to use. A stub returning PAGE_SIZE is provided when the architecture doesn't provide this function. - arch_vmap_pte_supported_shift() which tells __vmalloc_node_range() what page shift to use for a given area size. A stub returning PAGE_SHIFT is provided when the architecture doesn't provide this function. This patch (of 5): At the time being, arch_make_huge_pte() has the following prototype: pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma, struct page *page, int writable); vma is used to get the pages shift or size. vma is also used on Sparc to get vm_flags. page is not used. writable is not used. In order to use this function without a vma, replace vma by shift and flags. Also remove the used parameters. Link: https://lkml.kernel.org/r/cover.1620795204.git.christophe.leroy@csgroup.eu Link: https://lkml.kernel.org/r/f4633ac6a7da2f22f31a04a89e0a7026bb78b15b.1620795204.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:48:00 +00:00
pte = arch_make_huge_pte(pte, shift, vma->vm_flags);
if (folio_test_anon(folio))
mm/rmap: rename hugepage_add* to hugetlb_add* Patch series "mm/rmap: interface overhaul", v2. This series overhauls the rmap interface, to get rid of the "bool compound" / RMAP_COMPOUND parameter with the goal of making the interface less error prone, more future proof, and more natural to extend to "batching". Also, this converts the interface to always consume folio+subpage, which speeds up operations on large folios. Further, this series adds PTE-batching variants for 4 rmap functions, whereby only folio_add_anon_rmap_ptes() is used for batching in this series when PTE-remapping a PMD-mapped THP. folio_remove_rmap_ptes(), folio_try_dup_anon_rmap_ptes() and folio_dup_file_rmap_ptes() will soon come in handy[1,2]. This series performs a lot of folio conversion along the way. Most of the added LOC in the diff are only due to documentation. As we're moving to a pte/pmd interface where we clearly express the mapping granularity we are dealing with, we first get the remainder of hugetlb out of the way, as it is special and expected to remain special: it treats everything as a "single logical PTE" and only currently allows entire mappings. Even if we'd ever support partial mappings, I strongly assume the interface and implementation will still differ heavily: hopefull we can avoid working on subpages/subpage mapcounts completely and only add a "count" parameter for them to enable batching. New (extended) hugetlb interface that operates on entire folio: * hugetlb_add_new_anon_rmap() -> Already existed * hugetlb_add_anon_rmap() -> Already existed * hugetlb_try_dup_anon_rmap() * hugetlb_try_share_anon_rmap() * hugetlb_add_file_rmap() * hugetlb_remove_rmap() New "ordinary" interface for small folios / THP:: * folio_add_new_anon_rmap() -> Already existed * folio_add_anon_rmap_[pte|ptes|pmd]() * folio_try_dup_anon_rmap_[pte|ptes|pmd]() * folio_try_share_anon_rmap_[pte|pmd]() * folio_add_file_rmap_[pte|ptes|pmd]() * folio_dup_file_rmap_[pte|ptes|pmd]() * folio_remove_rmap_[pte|ptes|pmd]() folio_add_new_anon_rmap() will always map at the largest granularity possible (currently, a single PMD to cover a PMD-sized THP). Could be extended if ever required. In the future, we might want "_pud" variants and eventually "_pmds" variants for batching. I ran some simple microbenchmarks on an Intel(R) Xeon(R) Silver 4210R: measuring munmap(), fork(), cow, MADV_DONTNEED on each PTE ... and PTE remapping PMD-mapped THPs on 1 GiB of memory. For small folios, there is barely a change (< 1% improvement for me). For PTE-mapped THP: * PTE-remapping a PMD-mapped THP is more than 10% faster. * fork() is more than 4% faster. * MADV_DONTNEED is 2% faster * COW when writing only a single byte on a COW-shared PTE is 1% faster * munmap() barely changes (< 1%). [1] https://lkml.kernel.org/r/20230810103332.3062143-1-ryan.roberts@arm.com [2] https://lkml.kernel.org/r/20231204105440.61448-1-ryan.roberts@arm.com This patch (of 40): Let's just call it "hugetlb_". Yes, it's all already inconsistent and confusing because we have a lot of "hugepage_" functions for legacy reasons. But "hugetlb" cannot possibly be confused with transparent huge pages, and it matches "hugetlb.c" and "folio_test_hugetlb()". So let's minimize confusion in rmap code. Link: https://lkml.kernel.org/r/20231220224504.646757-1-david@redhat.com Link: https://lkml.kernel.org/r/20231220224504.646757-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20 22:44:25 +00:00
hugetlb_add_anon_rmap(folio, vma, pvmw.address,
rmap_flags);
else
hugetlb_add_file_rmap(folio);
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
set_huge_pte_at(vma->vm_mm, pvmw.address, pvmw.pte, pte,
psize);
} else
#endif
{
if (folio_test_anon(folio))
folio_add_anon_rmap_pte(folio, new, vma,
pvmw.address, rmap_flags);
else
folio_add_file_rmap_pte(folio, new, vma);
mm: change page type prior to adding page table entry Patch series "page table check", v3. Ensure that some memory corruptions are prevented by checking at the time of insertion of entries into user page tables that there is no illegal sharing. We have recently found a problem [1] that existed in kernel since 4.14. The problem was caused by broken page ref count and led to memory leaking from one process into another. The problem was accidentally detected by studying a dump of one process and noticing that one page contains memory that should not belong to this process. There are some other page->_refcount related problems that were recently fixed: [2], [3] which potentially could also lead to illegal sharing. In addition to hardening refcount [4] itself, this work is an attempt to prevent this class of memory corruption issues. It uses a simple state machine that is independent from regular MM logic to check for illegal sharing at time pages are inserted and removed from page tables. [1] https://lore.kernel.org/all/xr9335nxwc5y.fsf@gthelen2.svl.corp.google.com [2] https://lore.kernel.org/all/1582661774-30925-2-git-send-email-akaher@vmware.com [3] https://lore.kernel.org/all/20210622021423.154662-3-mike.kravetz@oracle.com [4] https://lore.kernel.org/all/20211221150140.988298-1-pasha.tatashin@soleen.com This patch (of 4): There are a few places where we first update the entry in the user page table, and later change the struct page to indicate that this is anonymous or file page. In most places, however, we first configure the page metadata and then insert entries into the page table. Page table check, will use the information from struct page to verify the type of entry is inserted. Change the order in all places to first update struct page, and later to update page table. This means that we first do calls that may change the type of page (anon or file): page_move_anon_rmap page_add_anon_rmap do_page_add_anon_rmap page_add_new_anon_rmap page_add_file_rmap hugepage_add_anon_rmap hugepage_add_new_anon_rmap And after that do calls that add entries to the page table: set_huge_pte_at set_pte_at Link: https://lkml.kernel.org/r/20211221154650.1047963-1-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20211221154650.1047963-2-pasha.tatashin@soleen.com Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Turner <pjt@google.com> Cc: Wei Xu <weixugc@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Will Deacon <will@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:06:29 +00:00
set_pte_at(vma->vm_mm, pvmw.address, pvmw.pte, pte);
}
if (vma->vm_flags & VM_LOCKED)
mlock_drain_local();
mm, thp: fix mlocking THP page with migration enabled A transparent huge page is represented by a single entry on an LRU list. Therefore, we can only make unevictable an entire compound page, not individual subpages. If a user tries to mlock() part of a huge page, we want the rest of the page to be reclaimable. We handle this by keeping PTE-mapped huge pages on normal LRU lists: the PMD on border of VM_LOCKED VMA will be split into PTE table. Introduction of THP migration breaks[1] the rules around mlocking THP pages. If we had a single PMD mapping of the page in mlocked VMA, the page will get mlocked, regardless of PTE mappings of the page. For tmpfs/shmem it's easy to fix by checking PageDoubleMap() in remove_migration_pmd(). Anon THP pages can only be shared between processes via fork(). Mlocked page can only be shared if parent mlocked it before forking, otherwise CoW will be triggered on mlock(). For Anon-THP, we can fix the issue by munlocking the page on removing PTE migration entry for the page. PTEs for the page will always come after mlocked PMD: rmap walks VMAs from oldest to newest. Test-case: #include <unistd.h> #include <sys/mman.h> #include <sys/wait.h> #include <linux/mempolicy.h> #include <numaif.h> int main(void) { unsigned long nodemask = 4; void *addr; addr = mmap((void *)0x20000000UL, 2UL << 20, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_LOCKED, -1, 0); if (fork()) { wait(NULL); return 0; } mlock(addr, 4UL << 10); mbind(addr, 2UL << 20, MPOL_PREFERRED | MPOL_F_RELATIVE_NODES, &nodemask, 4, MPOL_MF_MOVE); return 0; } [1] https://lkml.kernel.org/r/CAOMGZ=G52R-30rZvhGxEbkTw7rLLwBGadVYeo--iizcD3upL3A@mail.gmail.com Link: http://lkml.kernel.org/r/20180917133816.43995-1-kirill.shutemov@linux.intel.com Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05 22:51:41 +00:00
trace_remove_migration_pte(pvmw.address, pte_val(pte),
compound_order(new));
/* No need to invalidate - it was non-present before */
update_mmu_cache(vma, pvmw.address, pvmw.pte);
}
mm: page migration fix PageMlocked on migrated pages Commit e6c509f85455 ("mm: use clear_page_mlock() in page_remove_rmap()") in v3.7 inadvertently made mlock_migrate_page() impotent: page migration unmaps the page from userspace before migrating, and that commit clears PageMlocked on the final unmap, leaving mlock_migrate_page() with nothing to do. Not a serious bug, the next attempt at reclaiming the page would fix it up; but a betrayal of page migration's intent - the new page ought to emerge as PageMlocked. I don't see how to fix it for mlock_migrate_page() itself; but easily fixed in remove_migration_pte(), by calling mlock_vma_page() when the vma is VM_LOCKED - under pte lock as in try_to_unmap_one(). Delete mlock_migrate_page()? Not quite, it does still serve a purpose for migrate_misplaced_transhuge_page(): where we could replace it by a test, clear_page_mlock(), mlock_vma_page() sequence; but would that be an improvement? mlock_migrate_page() is fairly lean, and let's make it leaner by skipping the irq save/restore now clearly not needed. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:49:37 +00:00
return true;
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
}
/*
* Get rid of all migration entries and replace them by
* references to the indicated page.
*/
void remove_migration_ptes(struct folio *src, struct folio *dst, bool locked)
{
struct rmap_walk_control rwc = {
.rmap_one = remove_migration_pte,
.arg = src,
};
if (locked)
rmap_walk_locked(dst, &rwc);
else
rmap_walk(dst, &rwc);
}
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
/*
* Something used the pte of a page under migration. We need to
* get to the page and wait until migration is finished.
* When we return from this function the fault will be retried.
*/
mm/migrate: remove cruft from migration_entry_wait()s migration_entry_wait_on_locked() does not need to take a mapped pte pointer, its callers can do the unmap first. Annotate it with __releases(ptl) to reduce sparse warnings. Fold __migration_entry_wait_huge() into migration_entry_wait_huge(). Fold __migration_entry_wait() into migration_entry_wait(), preferring the tighter pte_offset_map_lock() to pte_offset_map() and pte_lockptr(). Link: https://lkml.kernel.org/r/b0e2a532-cdf2-561b-e999-f3b13b8d6d3@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:08:20 +00:00
void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
unsigned long address)
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
{
mm/migrate: remove cruft from migration_entry_wait()s migration_entry_wait_on_locked() does not need to take a mapped pte pointer, its callers can do the unmap first. Annotate it with __releases(ptl) to reduce sparse warnings. Fold __migration_entry_wait_huge() into migration_entry_wait_huge(). Fold __migration_entry_wait() into migration_entry_wait(), preferring the tighter pte_offset_map_lock() to pte_offset_map() and pte_lockptr(). Link: https://lkml.kernel.org/r/b0e2a532-cdf2-561b-e999-f3b13b8d6d3@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:08:20 +00:00
spinlock_t *ptl;
pte_t *ptep;
pte_t pte;
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
swp_entry_t entry;
mm/migrate: remove cruft from migration_entry_wait()s migration_entry_wait_on_locked() does not need to take a mapped pte pointer, its callers can do the unmap first. Annotate it with __releases(ptl) to reduce sparse warnings. Fold __migration_entry_wait_huge() into migration_entry_wait_huge(). Fold __migration_entry_wait() into migration_entry_wait(), preferring the tighter pte_offset_map_lock() to pte_offset_map() and pte_lockptr(). Link: https://lkml.kernel.org/r/b0e2a532-cdf2-561b-e999-f3b13b8d6d3@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:08:20 +00:00
ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
mm/various: give up if pte_offset_map[_lock]() fails Following the examples of nearby code, various functions can just give up if pte_offset_map() or pte_offset_map_lock() fails. And there's no need for a preliminary pmd_trans_unstable() or other such check, since such cases are now safely handled inside. Link: https://lkml.kernel.org/r/7b9bd85d-1652-cbf2-159d-f503b45e5b@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:29:22 +00:00
if (!ptep)
return;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte = ptep_get(ptep);
mm/migrate: remove cruft from migration_entry_wait()s migration_entry_wait_on_locked() does not need to take a mapped pte pointer, its callers can do the unmap first. Annotate it with __releases(ptl) to reduce sparse warnings. Fold __migration_entry_wait_huge() into migration_entry_wait_huge(). Fold __migration_entry_wait() into migration_entry_wait(), preferring the tighter pte_offset_map_lock() to pte_offset_map() and pte_lockptr(). Link: https://lkml.kernel.org/r/b0e2a532-cdf2-561b-e999-f3b13b8d6d3@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:08:20 +00:00
pte_unmap(ptep);
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
if (!is_swap_pte(pte))
goto out;
entry = pte_to_swp_entry(pte);
if (!is_migration_entry(entry))
goto out;
mm/migrate: remove cruft from migration_entry_wait()s migration_entry_wait_on_locked() does not need to take a mapped pte pointer, its callers can do the unmap first. Annotate it with __releases(ptl) to reduce sparse warnings. Fold __migration_entry_wait_huge() into migration_entry_wait_huge(). Fold __migration_entry_wait() into migration_entry_wait(), preferring the tighter pte_offset_map_lock() to pte_offset_map() and pte_lockptr(). Link: https://lkml.kernel.org/r/b0e2a532-cdf2-561b-e999-f3b13b8d6d3@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:08:20 +00:00
migration_entry_wait_on_locked(entry, ptl);
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:35 +00:00
return;
out:
mm/migrate: remove cruft from migration_entry_wait()s migration_entry_wait_on_locked() does not need to take a mapped pte pointer, its callers can do the unmap first. Annotate it with __releases(ptl) to reduce sparse warnings. Fold __migration_entry_wait_huge() into migration_entry_wait_huge(). Fold __migration_entry_wait() into migration_entry_wait(), preferring the tighter pte_offset_map_lock() to pte_offset_map() and pte_lockptr(). Link: https://lkml.kernel.org/r/b0e2a532-cdf2-561b-e999-f3b13b8d6d3@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:08:20 +00:00
spin_unlock(ptl);
}
#ifdef CONFIG_HUGETLB_PAGE
mm/hugetlb: move swap entry handling into vma lock when faulted In hugetlb_fault(), there used to have a special path to handle swap entry at the entrance using huge_pte_offset(). That's unsafe because huge_pte_offset() for a pmd sharable range can access freed pgtables if without any lock to protect the pgtable from being freed after pmd unshare. Here the simplest solution to make it safe is to move the swap handling to be after the vma lock being held. We may need to take the fault mutex on either migration or hwpoison entries now (also the vma lock, but that's really needed), however neither of them is hot path. Note that the vma lock cannot be released in hugetlb_fault() when the migration entry is detected, because in migration_entry_wait_huge() the pgtable page will be used again (by taking the pgtable lock), so that also need to be protected by the vma lock. Modify migration_entry_wait_huge() so that it must be called with vma read lock held, and properly release the lock in __migration_entry_wait_huge(). Link: https://lkml.kernel.org/r/20221216155100.2043537-5-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Jann Horn <jannh@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-16 15:50:55 +00:00
/*
* The vma read lock must be held upon entry. Holding that lock prevents either
* the pte or the ptl from being freed.
*
* This function will release the vma lock before returning.
*/
void migration_entry_wait_huge(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
{
mm/migrate: remove cruft from migration_entry_wait()s migration_entry_wait_on_locked() does not need to take a mapped pte pointer, its callers can do the unmap first. Annotate it with __releases(ptl) to reduce sparse warnings. Fold __migration_entry_wait_huge() into migration_entry_wait_huge(). Fold __migration_entry_wait() into migration_entry_wait(), preferring the tighter pte_offset_map_lock() to pte_offset_map() and pte_lockptr(). Link: https://lkml.kernel.org/r/b0e2a532-cdf2-561b-e999-f3b13b8d6d3@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:08:20 +00:00
spinlock_t *ptl = huge_pte_lockptr(hstate_vma(vma), vma->vm_mm, ptep);
pte_t pte;
mm/hugetlb: move swap entry handling into vma lock when faulted In hugetlb_fault(), there used to have a special path to handle swap entry at the entrance using huge_pte_offset(). That's unsafe because huge_pte_offset() for a pmd sharable range can access freed pgtables if without any lock to protect the pgtable from being freed after pmd unshare. Here the simplest solution to make it safe is to move the swap handling to be after the vma lock being held. We may need to take the fault mutex on either migration or hwpoison entries now (also the vma lock, but that's really needed), however neither of them is hot path. Note that the vma lock cannot be released in hugetlb_fault() when the migration entry is detected, because in migration_entry_wait_huge() the pgtable page will be used again (by taking the pgtable lock), so that also need to be protected by the vma lock. Modify migration_entry_wait_huge() so that it must be called with vma read lock held, and properly release the lock in __migration_entry_wait_huge(). Link: https://lkml.kernel.org/r/20221216155100.2043537-5-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Jann Horn <jannh@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-16 15:50:55 +00:00
hugetlb_vma_assert_locked(vma);
spin_lock(ptl);
pte = huge_ptep_get(vma->vm_mm, addr, ptep);
mm/hugetlb: move swap entry handling into vma lock when faulted In hugetlb_fault(), there used to have a special path to handle swap entry at the entrance using huge_pte_offset(). That's unsafe because huge_pte_offset() for a pmd sharable range can access freed pgtables if without any lock to protect the pgtable from being freed after pmd unshare. Here the simplest solution to make it safe is to move the swap handling to be after the vma lock being held. We may need to take the fault mutex on either migration or hwpoison entries now (also the vma lock, but that's really needed), however neither of them is hot path. Note that the vma lock cannot be released in hugetlb_fault() when the migration entry is detected, because in migration_entry_wait_huge() the pgtable page will be used again (by taking the pgtable lock), so that also need to be protected by the vma lock. Modify migration_entry_wait_huge() so that it must be called with vma read lock held, and properly release the lock in __migration_entry_wait_huge(). Link: https://lkml.kernel.org/r/20221216155100.2043537-5-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Jann Horn <jannh@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-16 15:50:55 +00:00
if (unlikely(!is_hugetlb_entry_migration(pte))) {
spin_unlock(ptl);
mm/hugetlb: move swap entry handling into vma lock when faulted In hugetlb_fault(), there used to have a special path to handle swap entry at the entrance using huge_pte_offset(). That's unsafe because huge_pte_offset() for a pmd sharable range can access freed pgtables if without any lock to protect the pgtable from being freed after pmd unshare. Here the simplest solution to make it safe is to move the swap handling to be after the vma lock being held. We may need to take the fault mutex on either migration or hwpoison entries now (also the vma lock, but that's really needed), however neither of them is hot path. Note that the vma lock cannot be released in hugetlb_fault() when the migration entry is detected, because in migration_entry_wait_huge() the pgtable page will be used again (by taking the pgtable lock), so that also need to be protected by the vma lock. Modify migration_entry_wait_huge() so that it must be called with vma read lock held, and properly release the lock in __migration_entry_wait_huge(). Link: https://lkml.kernel.org/r/20221216155100.2043537-5-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Jann Horn <jannh@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-16 15:50:55 +00:00
hugetlb_vma_unlock_read(vma);
} else {
/*
* If migration entry existed, safe to release vma lock
* here because the pgtable page won't be freed without the
* pgtable lock released. See comment right above pgtable
* lock release in migration_entry_wait_on_locked().
*/
hugetlb_vma_unlock_read(vma);
mm/migrate: remove cruft from migration_entry_wait()s migration_entry_wait_on_locked() does not need to take a mapped pte pointer, its callers can do the unmap first. Annotate it with __releases(ptl) to reduce sparse warnings. Fold __migration_entry_wait_huge() into migration_entry_wait_huge(). Fold __migration_entry_wait() into migration_entry_wait(), preferring the tighter pte_offset_map_lock() to pte_offset_map() and pte_lockptr(). Link: https://lkml.kernel.org/r/b0e2a532-cdf2-561b-e999-f3b13b8d6d3@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:08:20 +00:00
migration_entry_wait_on_locked(pte_to_swp_entry(pte), ptl);
mm/hugetlb: move swap entry handling into vma lock when faulted In hugetlb_fault(), there used to have a special path to handle swap entry at the entrance using huge_pte_offset(). That's unsafe because huge_pte_offset() for a pmd sharable range can access freed pgtables if without any lock to protect the pgtable from being freed after pmd unshare. Here the simplest solution to make it safe is to move the swap handling to be after the vma lock being held. We may need to take the fault mutex on either migration or hwpoison entries now (also the vma lock, but that's really needed), however neither of them is hot path. Note that the vma lock cannot be released in hugetlb_fault() when the migration entry is detected, because in migration_entry_wait_huge() the pgtable page will be used again (by taking the pgtable lock), so that also need to be protected by the vma lock. Modify migration_entry_wait_huge() so that it must be called with vma read lock held, and properly release the lock in __migration_entry_wait_huge(). Link: https://lkml.kernel.org/r/20221216155100.2043537-5-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Jann Horn <jannh@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-16 15:50:55 +00:00
}
}
#endif
mm: thp: enable thp migration in generic path Add thp migration's core code, including conversions between a PMD entry and a swap entry, setting PMD migration entry, removing PMD migration entry, and waiting on PMD migration entries. This patch makes it possible to support thp migration. If you fail to allocate a destination page as a thp, you just split the source thp as we do now, and then enter the normal page migration. If you succeed to allocate destination thp, you enter thp migration. Subsequent patches actually enable thp migration for each caller of page migration by allowing its get_new_page() callback to allocate thps. [zi.yan@cs.rutgers.edu: fix gcc-4.9.0 -Wmissing-braces warning] Link: http://lkml.kernel.org/r/A0ABA698-7486-46C3-B209-E95A9048B22C@cs.rutgers.edu [akpm@linux-foundation.org: fix x86_64 allnoconfig warning] Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:10:57 +00:00
#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
void pmd_migration_entry_wait(struct mm_struct *mm, pmd_t *pmd)
{
spinlock_t *ptl;
ptl = pmd_lock(mm, pmd);
if (!is_pmd_migration_entry(*pmd))
goto unlock;
mm/migrate: remove cruft from migration_entry_wait()s migration_entry_wait_on_locked() does not need to take a mapped pte pointer, its callers can do the unmap first. Annotate it with __releases(ptl) to reduce sparse warnings. Fold __migration_entry_wait_huge() into migration_entry_wait_huge(). Fold __migration_entry_wait() into migration_entry_wait(), preferring the tighter pte_offset_map_lock() to pte_offset_map() and pte_lockptr(). Link: https://lkml.kernel.org/r/b0e2a532-cdf2-561b-e999-f3b13b8d6d3@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 01:08:20 +00:00
migration_entry_wait_on_locked(pmd_to_swp_entry(*pmd), ptl);
mm: thp: enable thp migration in generic path Add thp migration's core code, including conversions between a PMD entry and a swap entry, setting PMD migration entry, removing PMD migration entry, and waiting on PMD migration entries. This patch makes it possible to support thp migration. If you fail to allocate a destination page as a thp, you just split the source thp as we do now, and then enter the normal page migration. If you succeed to allocate destination thp, you enter thp migration. Subsequent patches actually enable thp migration for each caller of page migration by allowing its get_new_page() callback to allocate thps. [zi.yan@cs.rutgers.edu: fix gcc-4.9.0 -Wmissing-braces warning] Link: http://lkml.kernel.org/r/A0ABA698-7486-46C3-B209-E95A9048B22C@cs.rutgers.edu [akpm@linux-foundation.org: fix x86_64 allnoconfig warning] Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:10:57 +00:00
return;
unlock:
spin_unlock(ptl);
}
#endif
static int folio_expected_refs(struct address_space *mapping,
struct folio *folio)
{
int refs = 1;
if (!mapping)
return refs;
refs += folio_nr_pages(folio);
if (folio_test_private(folio))
refs++;
return refs;
}
/*
* Replace the folio in the mapping.
*
* The number of remaining references must be:
* 1 for anonymous folios without a mapping
* 2 for folios with a mapping
* 3 for folios with a mapping and PagePrivate/PagePrivate2 set.
*/
static int __folio_migrate_mapping(struct address_space *mapping,
struct folio *newfolio, struct folio *folio, int expected_count)
{
XA_STATE(xas, &mapping->i_pages, folio_index(folio));
mm: migrate dirty page without clear_page_dirty_for_io etc clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:05 +00:00
struct zone *oldzone, *newzone;
int dirty;
long nr = folio_nr_pages(folio);
long entries, i;
mm/migrate: new memory migration helper for use with device memory This patch add a new memory migration helpers, which migrate memory backing a range of virtual address of a process to different memory (which can be allocated through special allocator). It differs from numa migration by working on a range of virtual address and thus by doing migration in chunk that can be large enough to use DMA engine or special copy offloading engine. Expected users are any one with heterogeneous memory where different memory have different characteristics (latency, bandwidth, ...). As an example IBM platform with CAPI bus can make use of this feature to migrate between regular memory and CAPI device memory. New CPU architecture with a pool of high performance memory not manage as cache but presented as regular memory (while being faster and with lower latency than DDR) will also be prime user of this patch. Migration to private device memory will be useful for device that have large pool of such like GPU, NVidia plans to use HMM for that. Link: http://lkml.kernel.org/r/20170817000548.32038-15-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Evgeny Baskakov <ebaskakov@nvidia.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Mark Hairgrove <mhairgrove@nvidia.com> Signed-off-by: Sherry Cheung <SCheung@nvidia.com> Signed-off-by: Subhash Gutti <sgutti@nvidia.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:12:09 +00:00
if (!mapping) {
mm: fix crashes from deferred split racing folio migration Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on flags when freeing, yet the flags shown are not bad: PG_locked had been set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN symptoms implying double free by deferred split and large folio migration. 6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration") was right to fix the memcg-dependent locking broken in 85ce2c517ade ("memcontrol: only transfer the memcg data for migration"), but missed a subtlety of deferred_split_scan(): it moves folios to its own local list to work on them without split_queue_lock, during which time folio->_deferred_list is not empty, but even the "right" lock does nothing to secure the folio and the list it is on. Fortunately, deferred_split_scan() is careful to use folio_try_get(): so folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable() while the old folio's reference count is temporarily frozen to 0 - adding such a freeze in the !mapping case too (originally, folio lock and unmapping and no swap cache left an anon folio unreachable, so no freezing was needed there: but the deferred split queue offers a way to reach it). Link: https://lkml.kernel.org/r/29c83d1a-11ca-b6c9-f92e-6ccb322af510@google.com Fixes: 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-02 07:40:55 +00:00
/* Take off deferred split queue while frozen and memcg set */
if (folio_test_large(folio) &&
folio_test_large_rmappable(folio)) {
if (!folio_ref_freeze(folio, expected_count))
return -EAGAIN;
folio_undo_large_rmappable(folio);
folio_ref_unfreeze(folio, expected_count);
}
/* No turning back from here */
newfolio->index = folio->index;
newfolio->mapping = folio->mapping;
if (folio_test_swapbacked(folio))
__folio_set_swapbacked(newfolio);
mm: adjust address_space_operations.migratepage() return code Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. This patch-set follows the main idea discussed at 2012 LSFMMS session: "Ballooning for transparent huge pages" -- http://lwn.net/Articles/490114/ to introduce the required changes to the virtio_balloon driver, as well as the changes to the core compaction & migration bits, in order to make those subsystems aware of ballooned pages and allow memory balloon pages become movable within a guest, thus avoiding the aforementioned fragmentation issue Following are numbers that prove this patch benefits on allowing compaction to be more effective at memory ballooned guests. Results for STRESS-HIGHALLOC benchmark, from Mel Gorman's mmtests suite, running on a 4gB RAM KVM guest which was ballooning 512mB RAM in 64mB chunks, at every minute (inflating/deflating), while test was running: ===BEGIN stress-highalloc STRESS-HIGHALLOC highalloc-3.7 highalloc-3.7 rc4-clean rc4-patch Pass 1 55.00 ( 0.00%) 62.00 ( 7.00%) Pass 2 54.00 ( 0.00%) 62.00 ( 8.00%) while Rested 75.00 ( 0.00%) 80.00 ( 5.00%) MMTests Statistics: duration 3.7 3.7 rc4-clean rc4-patch User 1207.59 1207.46 System 1300.55 1299.61 Elapsed 2273.72 2157.06 MMTests Statistics: vmstat 3.7 3.7 rc4-clean rc4-patch Page Ins 3581516 2374368 Page Outs 11148692 10410332 Swap Ins 80 47 Swap Outs 3641 476 Direct pages scanned 37978 33826 Kswapd pages scanned 1828245 1342869 Kswapd pages reclaimed 1710236 1304099 Direct pages reclaimed 32207 31005 Kswapd efficiency 93% 97% Kswapd velocity 804.077 622.546 Direct efficiency 84% 91% Direct velocity 16.703 15.682 Percentage direct scans 2% 2% Page writes by reclaim 79252 9704 Page writes file 75611 9228 Page writes anon 3641 476 Page reclaim immediate 16764 11014 Page rescued immediate 0 0 Slabs scanned 2171904 2152448 Direct inode steals 385 2261 Kswapd inode steals 659137 609670 Kswapd skipped wait 1 69 THP fault alloc 546 631 THP collapse alloc 361 339 THP splits 259 263 THP fault fallback 98 50 THP collapse fail 20 17 Compaction stalls 747 499 Compaction success 244 145 Compaction failures 503 354 Compaction pages moved 370888 474837 Compaction move failure 77378 65259 ===END stress-highalloc This patch: Introduce MIGRATEPAGE_SUCCESS as the default return code for address_space_operations.migratepage() method and documents the expected return code for the same method in failure cases. Signed-off-by: Rafael Aquini <aquini@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 00:02:31 +00:00
return MIGRATEPAGE_SUCCESS;
}
oldzone = folio_zone(folio);
newzone = folio_zone(newfolio);
mm: migrate dirty page without clear_page_dirty_for_io etc clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:05 +00:00
xas_lock_irq(&xas);
if (!folio_ref_freeze(folio, expected_count)) {
xas_unlock_irq(&xas);
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 02:45:30 +00:00
return -EAGAIN;
}
mm: fix crashes from deferred split racing folio migration Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on flags when freeing, yet the flags shown are not bad: PG_locked had been set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN symptoms implying double free by deferred split and large folio migration. 6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration") was right to fix the memcg-dependent locking broken in 85ce2c517ade ("memcontrol: only transfer the memcg data for migration"), but missed a subtlety of deferred_split_scan(): it moves folios to its own local list to work on them without split_queue_lock, during which time folio->_deferred_list is not empty, but even the "right" lock does nothing to secure the folio and the list it is on. Fortunately, deferred_split_scan() is careful to use folio_try_get(): so folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable() while the old folio's reference count is temporarily frozen to 0 - adding such a freeze in the !mapping case too (originally, folio lock and unmapping and no swap cache left an anon folio unreachable, so no freezing was needed there: but the deferred split queue offers a way to reach it). Link: https://lkml.kernel.org/r/29c83d1a-11ca-b6c9-f92e-6ccb322af510@google.com Fixes: 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-02 07:40:55 +00:00
/* Take off deferred split queue while frozen and memcg set */
folio_undo_large_rmappable(folio);
mm: fix crashes from deferred split racing folio migration Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on flags when freeing, yet the flags shown are not bad: PG_locked had been set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN symptoms implying double free by deferred split and large folio migration. 6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration") was right to fix the memcg-dependent locking broken in 85ce2c517ade ("memcontrol: only transfer the memcg data for migration"), but missed a subtlety of deferred_split_scan(): it moves folios to its own local list to work on them without split_queue_lock, during which time folio->_deferred_list is not empty, but even the "right" lock does nothing to secure the folio and the list it is on. Fortunately, deferred_split_scan() is careful to use folio_try_get(): so folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable() while the old folio's reference count is temporarily frozen to 0 - adding such a freeze in the !mapping case too (originally, folio lock and unmapping and no swap cache left an anon folio unreachable, so no freezing was needed there: but the deferred split queue offers a way to reach it). Link: https://lkml.kernel.org/r/29c83d1a-11ca-b6c9-f92e-6ccb322af510@google.com Fixes: 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-02 07:40:55 +00:00
/*
* Now we know that no one else is looking at the folio:
* no turning back from here.
*/
newfolio->index = folio->index;
newfolio->mapping = folio->mapping;
folio_ref_add(newfolio, nr); /* add cache reference */
if (folio_test_swapbacked(folio)) {
__folio_set_swapbacked(newfolio);
if (folio_test_swapcache(folio)) {
folio_set_swapcache(newfolio);
newfolio->private = folio_get_private(folio);
}
entries = nr;
} else {
VM_BUG_ON_FOLIO(folio_test_swapcache(folio), folio);
entries = 1;
}
/* Move dirty while folio refs frozen and newfolio not yet exposed */
dirty = folio_test_dirty(folio);
mm: migrate dirty page without clear_page_dirty_for_io etc clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:05 +00:00
if (dirty) {
folio_clear_dirty(folio);
folio_set_dirty(newfolio);
mm: migrate dirty page without clear_page_dirty_for_io etc clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:05 +00:00
}
/* Swap cache still stores N entries instead of a high-order entry */
for (i = 0; i < entries; i++) {
xas_store(&xas, newfolio);
xas_next(&xas);
}
[PATCH] radix-tree: RCU lockless readside Make radix tree lookups safe to be performed without locks. Readers are protected against nodes being deleted by using RCU based freeing. Readers are protected against new node insertion by using memory barriers to ensure the node itself will be properly written before it is visible in the radix tree. Each radix tree node keeps a record of their height (above leaf nodes). This height does not change after insertion -- when the radix tree is extended, higher nodes are only inserted in the top. So a lookup can take the pointer to what is *now* the root node, and traverse down it even if the tree is concurrently extended and this node becomes a subtree of a new root. "Direct" pointers (tree height of 0, where root->rnode points directly to the data item) are handled by using the low bit of the pointer to signal whether rnode is a direct pointer or a pointer to a radix tree node. When a reader wants to traverse the next branch, they will take a copy of the pointer. This pointer will be either NULL (and the branch is empty) or non-NULL (and will point to a valid node). [akpm@osdl.org: cleanups] [Lee.Schermerhorn@hp.com: bugfixes, comments, simplifications] [clameter@sgi.com: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 04:33:44 +00:00
/*
* Drop cache reference from old folio by unfreezing
* to one less reference.
[PATCH] radix-tree: RCU lockless readside Make radix tree lookups safe to be performed without locks. Readers are protected against nodes being deleted by using RCU based freeing. Readers are protected against new node insertion by using memory barriers to ensure the node itself will be properly written before it is visible in the radix tree. Each radix tree node keeps a record of their height (above leaf nodes). This height does not change after insertion -- when the radix tree is extended, higher nodes are only inserted in the top. So a lookup can take the pointer to what is *now* the root node, and traverse down it even if the tree is concurrently extended and this node becomes a subtree of a new root. "Direct" pointers (tree height of 0, where root->rnode points directly to the data item) are handled by using the low bit of the pointer to signal whether rnode is a direct pointer or a pointer to a radix tree node. When a reader wants to traverse the next branch, they will take a copy of the pointer. This pointer will be either NULL (and the branch is empty) or non-NULL (and will point to a valid node). [akpm@osdl.org: cleanups] [Lee.Schermerhorn@hp.com: bugfixes, comments, simplifications] [clameter@sgi.com: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 04:33:44 +00:00
* We know this isn't the last reference.
*/
folio_ref_unfreeze(folio, expected_count - nr);
[PATCH] radix-tree: RCU lockless readside Make radix tree lookups safe to be performed without locks. Readers are protected against nodes being deleted by using RCU based freeing. Readers are protected against new node insertion by using memory barriers to ensure the node itself will be properly written before it is visible in the radix tree. Each radix tree node keeps a record of their height (above leaf nodes). This height does not change after insertion -- when the radix tree is extended, higher nodes are only inserted in the top. So a lookup can take the pointer to what is *now* the root node, and traverse down it even if the tree is concurrently extended and this node becomes a subtree of a new root. "Direct" pointers (tree height of 0, where root->rnode points directly to the data item) are handled by using the low bit of the pointer to signal whether rnode is a direct pointer or a pointer to a radix tree node. When a reader wants to traverse the next branch, they will take a copy of the pointer. This pointer will be either NULL (and the branch is empty) or non-NULL (and will point to a valid node). [akpm@osdl.org: cleanups] [Lee.Schermerhorn@hp.com: bugfixes, comments, simplifications] [clameter@sgi.com: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 04:33:44 +00:00
xas_unlock(&xas);
mm: migrate dirty page without clear_page_dirty_for_io etc clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:05 +00:00
/* Leave irq disabled to prevent preemption while updating stats */
/*
* If moved to a different zone then also account
* the folio for that zone. Other VM counters will be
* taken care of when we establish references to the
* new folio and drop references to the old folio.
*
* Note that anonymous folios are accounted for
* via NR_FILE_PAGES and NR_ANON_MAPPED if they
* are mapped to swap space.
*/
mm: migrate dirty page without clear_page_dirty_for_io etc clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:05 +00:00
if (newzone != oldzone) {
struct lruvec *old_lruvec, *new_lruvec;
struct mem_cgroup *memcg;
memcg = folio_memcg(folio);
old_lruvec = mem_cgroup_lruvec(memcg, oldzone->zone_pgdat);
new_lruvec = mem_cgroup_lruvec(memcg, newzone->zone_pgdat);
__mod_lruvec_state(old_lruvec, NR_FILE_PAGES, -nr);
__mod_lruvec_state(new_lruvec, NR_FILE_PAGES, nr);
if (folio_test_swapbacked(folio) && !folio_test_swapcache(folio)) {
__mod_lruvec_state(old_lruvec, NR_SHMEM, -nr);
__mod_lruvec_state(new_lruvec, NR_SHMEM, nr);
if (folio_test_pmd_mappable(folio)) {
__mod_lruvec_state(old_lruvec, NR_SHMEM_THPS, -nr);
__mod_lruvec_state(new_lruvec, NR_SHMEM_THPS, nr);
}
mm: migrate dirty page without clear_page_dirty_for_io etc clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:05 +00:00
}
mm: memcg: add swapcache stat for memcg v2 This patch adds swapcache stat for the cgroup v2. The swapcache represents the memory that is accounted against both the memory and the swap limit of the cgroup. The main motivation behind exposing the swapcache stat is for enabling users to gracefully migrate from cgroup v1's memsw counter to cgroup v2's memory and swap counters. Cgroup v1's memsw limit allows users to limit the memory+swap usage of a workload but without control on the exact proportion of memory and swap. Cgroup v2 provides separate limits for memory and swap which enables more control on the exact usage of memory and swap individually for the workload. With some little subtleties, the v1's memsw limit can be switched with the sum of the v2's memory and swap limits. However the alternative for memsw usage is not yet available in cgroup v2. Exposing per-cgroup swapcache stat enables that alternative. Adding the memory usage and swap usage and subtracting the swapcache will approximate the memsw usage. This will help in the transparent migration of the workloads depending on memsw usage and limit to v2' memory and swap counters. The reasons these applications are still interested in this approximate memsw usage are: (1) these applications are not really interested in two separate memory and swap usage metrics. A single usage metric is more simple to use and reason about for them. (2) The memsw usage metric hides the underlying system's swap setup from the applications. Applications with multiple instances running in a datacenter with heterogeneous systems (some have swap and some don't) will keep seeing a consistent view of their usage. [akpm@linux-foundation.org: fix CONFIG_SWAP=n build] Link: https://lkml.kernel.org/r/20210108155813.2914586-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 20:03:55 +00:00
#ifdef CONFIG_SWAP
if (folio_test_swapcache(folio)) {
mm: memcg: add swapcache stat for memcg v2 This patch adds swapcache stat for the cgroup v2. The swapcache represents the memory that is accounted against both the memory and the swap limit of the cgroup. The main motivation behind exposing the swapcache stat is for enabling users to gracefully migrate from cgroup v1's memsw counter to cgroup v2's memory and swap counters. Cgroup v1's memsw limit allows users to limit the memory+swap usage of a workload but without control on the exact proportion of memory and swap. Cgroup v2 provides separate limits for memory and swap which enables more control on the exact usage of memory and swap individually for the workload. With some little subtleties, the v1's memsw limit can be switched with the sum of the v2's memory and swap limits. However the alternative for memsw usage is not yet available in cgroup v2. Exposing per-cgroup swapcache stat enables that alternative. Adding the memory usage and swap usage and subtracting the swapcache will approximate the memsw usage. This will help in the transparent migration of the workloads depending on memsw usage and limit to v2' memory and swap counters. The reasons these applications are still interested in this approximate memsw usage are: (1) these applications are not really interested in two separate memory and swap usage metrics. A single usage metric is more simple to use and reason about for them. (2) The memsw usage metric hides the underlying system's swap setup from the applications. Applications with multiple instances running in a datacenter with heterogeneous systems (some have swap and some don't) will keep seeing a consistent view of their usage. [akpm@linux-foundation.org: fix CONFIG_SWAP=n build] Link: https://lkml.kernel.org/r/20210108155813.2914586-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 20:03:55 +00:00
__mod_lruvec_state(old_lruvec, NR_SWAPCACHE, -nr);
__mod_lruvec_state(new_lruvec, NR_SWAPCACHE, nr);
}
#endif
if (dirty && mapping_can_writeback(mapping)) {
__mod_lruvec_state(old_lruvec, NR_FILE_DIRTY, -nr);
__mod_zone_page_state(oldzone, NR_ZONE_WRITE_PENDING, -nr);
__mod_lruvec_state(new_lruvec, NR_FILE_DIRTY, nr);
__mod_zone_page_state(newzone, NR_ZONE_WRITE_PENDING, nr);
mm: migrate dirty page without clear_page_dirty_for_io etc clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:05 +00:00
}
}
mm: migrate dirty page without clear_page_dirty_for_io etc clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:50:05 +00:00
local_irq_enable();
mm: adjust address_space_operations.migratepage() return code Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. This patch-set follows the main idea discussed at 2012 LSFMMS session: "Ballooning for transparent huge pages" -- http://lwn.net/Articles/490114/ to introduce the required changes to the virtio_balloon driver, as well as the changes to the core compaction & migration bits, in order to make those subsystems aware of ballooned pages and allow memory balloon pages become movable within a guest, thus avoiding the aforementioned fragmentation issue Following are numbers that prove this patch benefits on allowing compaction to be more effective at memory ballooned guests. Results for STRESS-HIGHALLOC benchmark, from Mel Gorman's mmtests suite, running on a 4gB RAM KVM guest which was ballooning 512mB RAM in 64mB chunks, at every minute (inflating/deflating), while test was running: ===BEGIN stress-highalloc STRESS-HIGHALLOC highalloc-3.7 highalloc-3.7 rc4-clean rc4-patch Pass 1 55.00 ( 0.00%) 62.00 ( 7.00%) Pass 2 54.00 ( 0.00%) 62.00 ( 8.00%) while Rested 75.00 ( 0.00%) 80.00 ( 5.00%) MMTests Statistics: duration 3.7 3.7 rc4-clean rc4-patch User 1207.59 1207.46 System 1300.55 1299.61 Elapsed 2273.72 2157.06 MMTests Statistics: vmstat 3.7 3.7 rc4-clean rc4-patch Page Ins 3581516 2374368 Page Outs 11148692 10410332 Swap Ins 80 47 Swap Outs 3641 476 Direct pages scanned 37978 33826 Kswapd pages scanned 1828245 1342869 Kswapd pages reclaimed 1710236 1304099 Direct pages reclaimed 32207 31005 Kswapd efficiency 93% 97% Kswapd velocity 804.077 622.546 Direct efficiency 84% 91% Direct velocity 16.703 15.682 Percentage direct scans 2% 2% Page writes by reclaim 79252 9704 Page writes file 75611 9228 Page writes anon 3641 476 Page reclaim immediate 16764 11014 Page rescued immediate 0 0 Slabs scanned 2171904 2152448 Direct inode steals 385 2261 Kswapd inode steals 659137 609670 Kswapd skipped wait 1 69 THP fault alloc 546 631 THP collapse alloc 361 339 THP splits 259 263 THP fault fallback 98 50 THP collapse fail 20 17 Compaction stalls 747 499 Compaction success 244 145 Compaction failures 503 354 Compaction pages moved 370888 474837 Compaction move failure 77378 65259 ===END stress-highalloc This patch: Introduce MIGRATEPAGE_SUCCESS as the default return code for address_space_operations.migratepage() method and documents the expected return code for the same method in failure cases. Signed-off-by: Rafael Aquini <aquini@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 00:02:31 +00:00
return MIGRATEPAGE_SUCCESS;
}
int folio_migrate_mapping(struct address_space *mapping,
struct folio *newfolio, struct folio *folio, int extra_count)
{
int expected_count = folio_expected_refs(mapping, folio) + extra_count;
if (folio_ref_count(folio) != expected_count)
return -EAGAIN;
return __folio_migrate_mapping(mapping, newfolio, folio, expected_count);
}
EXPORT_SYMBOL(folio_migrate_mapping);
/*
* The expected number of remaining references is the same as that
* of folio_migrate_mapping().
*/
int migrate_huge_page_move_mapping(struct address_space *mapping,
struct folio *dst, struct folio *src)
{
XA_STATE(xas, &mapping->i_pages, folio_index(src));
int rc, expected_count = folio_expected_refs(mapping, src);
if (folio_ref_count(src) != expected_count)
return -EAGAIN;
rc = folio_mc_copy(dst, src);
if (unlikely(rc))
return rc;
xas_lock_irq(&xas);
if (!folio_ref_freeze(src, expected_count)) {
xas_unlock_irq(&xas);
return -EAGAIN;
}
dst->index = src->index;
dst->mapping = src->mapping;
mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-26 19:20:17 +00:00
folio_ref_add(dst, folio_nr_pages(dst));
xas_store(&xas, dst);
mm/filemap: remove hugetlb special casing in filemap.c Remove special cased hugetlb handling code within the page cache by changing the granularity of ->index to the base page size rather than the huge page size. The motivation of this patch is to reduce complexity within the filemap code while also increasing performance by removing branches that are evaluated on every page cache lookup. To support the change in index, new wrappers for hugetlb page cache interactions are added. These wrappers perform the conversion to a linear index which is now expected by the page cache for huge pages. ========================= PERFORMANCE ====================================== Perf was used to check the performance differences after the patch. Overall the performance is similar to mainline with a very small larger overhead that occurs in __filemap_add_folio() and hugetlb_add_to_page_cache(). This is because of the larger overhead that occurs in xa_load() and xa_store() as the xarray is now using more entries to store hugetlb folios in the page cache. Timing aarch64 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt real 1m49.568s user 0m0.000s sys 1m49.461s 6.5-rc3: [root]# time fallocate -l 700GB test.txt real 1m47.495s user 0m0.000s sys 1m47.370s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m47.024s user 0m0.000s sys 1m46.921s 6.5-rc3: [root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt real 1m44.551s user 0m0.000s sys 1m44.438s x86 2MB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt real 0m22.383s user 0m0.000s sys 0m22.255s 6.5-rc3: [opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt real 0m22.735s user 0m0.038s sys 0m22.567s 1GB Page Size 6.5-rc3 + this patch: [root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt real 0m25.786s user 0m0.001s sys 0m25.589s 6.5-rc3: [root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt real 0m33.454s user 0m0.001s sys 0m33.193s aarch64: workload - fallocate a 700GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--95.04%--__pi_clear_page | |--3.57%--clear_huge_page | | | |--2.63%--rcu_all_qs | | | --0.91%--__cond_resched | --0.67%--__cond_resched 0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache 0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio 6.5-rc3 2MB Page Size: --100.00%--__arm64_sys_fallocate ksys_fallocate vfs_fallocate hugetlbfs_fallocate | |--94.91%--__pi_clear_page | |--4.11%--clear_huge_page | | | |--3.00%--rcu_all_qs | | | --1.10%--__cond_resched | --0.59%--__cond_resched 0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio x86 workload - fallocate a 100GB file backed by huge pages 6.5-rc3 + this patch: 2MB Page Size: hugetlbfs_fallocate | --99.57%--clear_huge_page | --98.47%--clear_page_erms | --0.53%--asm_sysvec_apic_timer_interrupt 0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio 0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store 6.5-rc3 2MB Page Size: --99.93%--__x64_sys_fallocate vfs_fallocate hugetlbfs_fallocate | --99.38%--clear_huge_page | |--98.40%--clear_page_erms | --0.59%--__cond_resched 0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio ========================= TESTING ====================================== This patch passes libhugetlbfs tests and LTP hugetlb tests ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 110 113 * Skipped: 0 0 * PASS: 107 113 * FAIL: 0 0 * Killed by signal: 3 0 * Bad configuration: 0 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** Done executing testcases. LTP Version: 20220527-178-g2761a81c4 page migration was also tested using Mike Kravetz's test program.[8] [dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug] Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-26 19:20:17 +00:00
folio_ref_unfreeze(src, expected_count - folio_nr_pages(src));
xas_unlock_irq(&xas);
mm: adjust address_space_operations.migratepage() return code Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. This patch-set follows the main idea discussed at 2012 LSFMMS session: "Ballooning for transparent huge pages" -- http://lwn.net/Articles/490114/ to introduce the required changes to the virtio_balloon driver, as well as the changes to the core compaction & migration bits, in order to make those subsystems aware of ballooned pages and allow memory balloon pages become movable within a guest, thus avoiding the aforementioned fragmentation issue Following are numbers that prove this patch benefits on allowing compaction to be more effective at memory ballooned guests. Results for STRESS-HIGHALLOC benchmark, from Mel Gorman's mmtests suite, running on a 4gB RAM KVM guest which was ballooning 512mB RAM in 64mB chunks, at every minute (inflating/deflating), while test was running: ===BEGIN stress-highalloc STRESS-HIGHALLOC highalloc-3.7 highalloc-3.7 rc4-clean rc4-patch Pass 1 55.00 ( 0.00%) 62.00 ( 7.00%) Pass 2 54.00 ( 0.00%) 62.00 ( 8.00%) while Rested 75.00 ( 0.00%) 80.00 ( 5.00%) MMTests Statistics: duration 3.7 3.7 rc4-clean rc4-patch User 1207.59 1207.46 System 1300.55 1299.61 Elapsed 2273.72 2157.06 MMTests Statistics: vmstat 3.7 3.7 rc4-clean rc4-patch Page Ins 3581516 2374368 Page Outs 11148692 10410332 Swap Ins 80 47 Swap Outs 3641 476 Direct pages scanned 37978 33826 Kswapd pages scanned 1828245 1342869 Kswapd pages reclaimed 1710236 1304099 Direct pages reclaimed 32207 31005 Kswapd efficiency 93% 97% Kswapd velocity 804.077 622.546 Direct efficiency 84% 91% Direct velocity 16.703 15.682 Percentage direct scans 2% 2% Page writes by reclaim 79252 9704 Page writes file 75611 9228 Page writes anon 3641 476 Page reclaim immediate 16764 11014 Page rescued immediate 0 0 Slabs scanned 2171904 2152448 Direct inode steals 385 2261 Kswapd inode steals 659137 609670 Kswapd skipped wait 1 69 THP fault alloc 546 631 THP collapse alloc 361 339 THP splits 259 263 THP fault fallback 98 50 THP collapse fail 20 17 Compaction stalls 747 499 Compaction success 244 145 Compaction failures 503 354 Compaction pages moved 370888 474837 Compaction move failure 77378 65259 ===END stress-highalloc This patch: Introduce MIGRATEPAGE_SUCCESS as the default return code for address_space_operations.migratepage() method and documents the expected return code for the same method in failure cases. Signed-off-by: Rafael Aquini <aquini@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 00:02:31 +00:00
return MIGRATEPAGE_SUCCESS;
}
/*
* Copy the flags and some other ancillary information
*/
void folio_migrate_flags(struct folio *newfolio, struct folio *folio)
{
int cpupid;
if (folio_test_referenced(folio))
folio_set_referenced(newfolio);
if (folio_test_uptodate(folio))
folio_mark_uptodate(newfolio);
if (folio_test_clear_active(folio)) {
VM_BUG_ON_FOLIO(folio_test_unevictable(folio), folio);
folio_set_active(newfolio);
} else if (folio_test_clear_unevictable(folio))
folio_set_unevictable(newfolio);
if (folio_test_workingset(folio))
folio_set_workingset(newfolio);
if (folio_test_checked(folio))
folio_set_checked(newfolio);
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
/*
* PG_anon_exclusive (-> PG_mappedtodisk) is always migrated via
* migration entries. We can still have PG_anon_exclusive set on an
* effectively unmapped and unreferenced first sub-pages of an
* anonymous THP: we can simply copy it here via PG_mappedtodisk.
*/
if (folio_test_mappedtodisk(folio))
folio_set_mappedtodisk(newfolio);
/* Move dirty on pages not done by folio_migrate_mapping() */
if (folio_test_dirty(folio))
folio_set_dirty(newfolio);
if (folio_test_young(folio))
folio_set_young(newfolio);
if (folio_test_idle(folio))
folio_set_idle(newfolio);
mm: introduce idle page tracking Knowing the portion of memory that is not used by a certain application or memory cgroup (idle memory) can be useful for partitioning the system efficiently, e.g. by setting memory cgroup limits appropriately. Currently, the only means to estimate the amount of idle memory provided by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the access bit for all pages mapped to a particular process by writing 1 to clear_refs, wait for some time, and then count smaps:Referenced. However, this method has two serious shortcomings: - it does not count unmapped file pages - it affects the reclaimer logic To overcome these drawbacks, this patch introduces two new page flags, Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap. A page's Idle flag can only be set from userspace by setting bit in /sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page, and it is cleared whenever the page is accessed either through page tables (it is cleared in page_referenced() in this case) or using the read(2) system call (mark_page_accessed()). Thus by setting the Idle flag for pages of a particular workload, which can be found e.g. by reading /proc/PID/pagemap, waiting for some time to let the workload access its working set, and then reading the bitmap file, one can estimate the amount of pages that are not used by the workload. The Young page flag is used to avoid interference with the memory reclaimer. A page's Young flag is set whenever the Access bit of a page table entry pointing to the page is cleared by writing to the bitmap file. If page_referenced() is called on a Young page, it will add 1 to its return value, therefore concealing the fact that the Access bit was cleared. Note, since there is no room for extra page flags on 32 bit, this feature uses extended page flags when compiled on 32 bit. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: kpageidle requires an MMU] [akpm@linux-foundation.org: decouple from page-flags rework] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 22:35:45 +00:00
/*
* Copy NUMA information to the new page, to prevent over-eager
* future migrations of this same page.
*/
cpupid = folio_xchg_last_cpupid(folio, -1);
memory tiering: hot page selection with hint page fault latency Patch series "memory tiering: hot page selection", v4. To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory nodes need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). So in this patchset, we implement a new hot page identification algorithm based on the latency between NUMA balancing page table scanning and hint page fault. Which is a kind of mostly frequently accessed (MFU) algorithm. In NUMA balancing memory tiering mode, if there are hot pages in slow memory node and cold pages in fast memory node, we need to promote/demote hot/cold pages between the fast and cold memory nodes. A choice is to promote/demote as fast as possible. But the CPU cycles and memory bandwidth consumed by the high promoting/demoting throughput will hurt the latency of some workload because of accessing inflating and slow memory bandwidth contention. A way to resolve this issue is to restrict the max promoting/demoting throughput. It will take longer to finish the promoting/demoting. But the workload latency will be better. This is implemented in this patchset as the page promotion rate limit mechanism. The promotion hot threshold is workload and system configuration dependent. So in this patchset, a method to adjust the hot threshold automatically is implemented. The basic idea is to control the number of the candidate promotion pages to match the promotion rate limit. We used the pmbench memory accessing benchmark tested the patchset on a 2-socket server system with DRAM and PMEM installed. The test results are as follows, pmbench score promote rate (accesses/s) MB/s ------------- ------------ base 146887704.1 725.6 hot selection 165695601.2 544.0 rate limit 162814569.8 165.2 auto adjustment 170495294.0 136.9 From the results above, With hot page selection patch [1/3], the pmbench score increases about 12.8%, and promote rate (overhead) decreases about 25.0%, compared with base kernel. With rate limit patch [2/3], pmbench score decreases about 1.7%, and promote rate decreases about 69.6%, compared with hot page selection patch. With threshold auto adjustment patch [3/3], pmbench score increases about 4.7%, and promote rate decrease about 17.1%, compared with rate limit patch. Baolin helped to test the patchset with MySQL on a machine which contains 1 DRAM node (30G) and 1 PMEM node (126G). sysbench /usr/share/sysbench/oltp_read_write.lua \ ...... --tables=200 \ --table-size=1000000 \ --report-interval=10 \ --threads=16 \ --time=120 The tps can be improved about 5%. This patch (of 3): To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory node need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). The most frequently accessed (MFU) algorithm is better. So, in this patch we implemented a better hot page selection algorithm. Which is based on NUMA balancing page table scanning and hint page fault as follows, - When the page tables of the processes are scanned to change PTE/PMD to be PROT_NONE, the current time is recorded in struct page as scan time. - When the page is accessed, hint page fault will occur. The scan time is gotten from the struct page. And The hint page fault latency is defined as hint page fault time - scan time The shorter the hint page fault latency of a page is, the higher the probability of their access frequency to be higher. So the hint page fault latency is a better estimation of the page hot/cold. It's hard to find some extra space in struct page to hold the scan time. Fortunately, we can reuse some bits used by the original NUMA balancing. NUMA balancing uses some bits in struct page to store the page accessing CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the multi-stage node selection algorithm to avoid to migrate pages shared accessed by the NUMA nodes back and forth. But for pages in the slow memory node, even if they are shared accessed by multiple NUMA nodes, as long as the pages are hot, they need to be promoted to the fast memory node. So the accessing CPU and PID information are unnecessary for the slow memory pages. We can reuse these bits in struct page to record the scan time. For the fast memory pages, these bits are used as before. For the hot threshold, the default value is 1 second, which works well in our performance test. All pages with hint page fault latency < hot threshold will be considered hot. It's hard for users to determine the hot threshold. So we don't provide a kernel ABI to set it, just provide a debugfs interface for advanced users to experiment. We will continue to work on a hot threshold automatic adjustment mechanism. The downside of the above method is that the response time to the workload hot spot changing may be much longer. For example, - A previous cold memory area becomes hot - The hint page fault will be triggered. But the hint page fault latency isn't shorter than the hot threshold. So the pages will not be promoted. - When the memory area is scanned again, maybe after a scan period, the hint page fault latency measured will be shorter than the hot threshold and the pages will be promoted. To mitigate this, if there are enough free space in the fast memory node, the hot threshold will not be used, all pages will be promoted upon the hint page fault for fast response. Thanks Zhong Jiang reported and tested the fix for a bug when disabling memory tiering mode dynamically. Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: osalvador <osalvador@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 08:39:51 +00:00
/*
* For memory tiering mode, when migrate between slow and fast
* memory node, reset cpupid, because that is used to record
* page access time in slow memory node.
*/
if (sysctl_numa_balancing_mode & NUMA_BALANCING_MEMORY_TIERING) {
bool f_toptier = node_is_toptier(folio_nid(folio));
bool t_toptier = node_is_toptier(folio_nid(newfolio));
memory tiering: hot page selection with hint page fault latency Patch series "memory tiering: hot page selection", v4. To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory nodes need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). So in this patchset, we implement a new hot page identification algorithm based on the latency between NUMA balancing page table scanning and hint page fault. Which is a kind of mostly frequently accessed (MFU) algorithm. In NUMA balancing memory tiering mode, if there are hot pages in slow memory node and cold pages in fast memory node, we need to promote/demote hot/cold pages between the fast and cold memory nodes. A choice is to promote/demote as fast as possible. But the CPU cycles and memory bandwidth consumed by the high promoting/demoting throughput will hurt the latency of some workload because of accessing inflating and slow memory bandwidth contention. A way to resolve this issue is to restrict the max promoting/demoting throughput. It will take longer to finish the promoting/demoting. But the workload latency will be better. This is implemented in this patchset as the page promotion rate limit mechanism. The promotion hot threshold is workload and system configuration dependent. So in this patchset, a method to adjust the hot threshold automatically is implemented. The basic idea is to control the number of the candidate promotion pages to match the promotion rate limit. We used the pmbench memory accessing benchmark tested the patchset on a 2-socket server system with DRAM and PMEM installed. The test results are as follows, pmbench score promote rate (accesses/s) MB/s ------------- ------------ base 146887704.1 725.6 hot selection 165695601.2 544.0 rate limit 162814569.8 165.2 auto adjustment 170495294.0 136.9 From the results above, With hot page selection patch [1/3], the pmbench score increases about 12.8%, and promote rate (overhead) decreases about 25.0%, compared with base kernel. With rate limit patch [2/3], pmbench score decreases about 1.7%, and promote rate decreases about 69.6%, compared with hot page selection patch. With threshold auto adjustment patch [3/3], pmbench score increases about 4.7%, and promote rate decrease about 17.1%, compared with rate limit patch. Baolin helped to test the patchset with MySQL on a machine which contains 1 DRAM node (30G) and 1 PMEM node (126G). sysbench /usr/share/sysbench/oltp_read_write.lua \ ...... --tables=200 \ --table-size=1000000 \ --report-interval=10 \ --threads=16 \ --time=120 The tps can be improved about 5%. This patch (of 3): To optimize page placement in a memory tiering system with NUMA balancing, the hot pages in the slow memory node need to be identified. Essentially, the original NUMA balancing implementation selects the mostly recently accessed (MRU) pages to promote. But this isn't a perfect algorithm to identify the hot pages. Because the pages with quite low access frequency may be accessed eventually given the NUMA balancing page table scanning period could be quite long (e.g. 60 seconds). The most frequently accessed (MFU) algorithm is better. So, in this patch we implemented a better hot page selection algorithm. Which is based on NUMA balancing page table scanning and hint page fault as follows, - When the page tables of the processes are scanned to change PTE/PMD to be PROT_NONE, the current time is recorded in struct page as scan time. - When the page is accessed, hint page fault will occur. The scan time is gotten from the struct page. And The hint page fault latency is defined as hint page fault time - scan time The shorter the hint page fault latency of a page is, the higher the probability of their access frequency to be higher. So the hint page fault latency is a better estimation of the page hot/cold. It's hard to find some extra space in struct page to hold the scan time. Fortunately, we can reuse some bits used by the original NUMA balancing. NUMA balancing uses some bits in struct page to store the page accessing CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the multi-stage node selection algorithm to avoid to migrate pages shared accessed by the NUMA nodes back and forth. But for pages in the slow memory node, even if they are shared accessed by multiple NUMA nodes, as long as the pages are hot, they need to be promoted to the fast memory node. So the accessing CPU and PID information are unnecessary for the slow memory pages. We can reuse these bits in struct page to record the scan time. For the fast memory pages, these bits are used as before. For the hot threshold, the default value is 1 second, which works well in our performance test. All pages with hint page fault latency < hot threshold will be considered hot. It's hard for users to determine the hot threshold. So we don't provide a kernel ABI to set it, just provide a debugfs interface for advanced users to experiment. We will continue to work on a hot threshold automatic adjustment mechanism. The downside of the above method is that the response time to the workload hot spot changing may be much longer. For example, - A previous cold memory area becomes hot - The hint page fault will be triggered. But the hint page fault latency isn't shorter than the hot threshold. So the pages will not be promoted. - When the memory area is scanned again, maybe after a scan period, the hint page fault latency measured will be shorter than the hot threshold and the pages will be promoted. To mitigate this, if there are enough free space in the fast memory node, the hot threshold will not be used, all pages will be promoted upon the hint page fault for fast response. Thanks Zhong Jiang reported and tested the fix for a bug when disabling memory tiering mode dynamically. Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: osalvador <osalvador@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 08:39:51 +00:00
if (f_toptier != t_toptier)
cpupid = -1;
}
folio_xchg_last_cpupid(newfolio, cpupid);
folio_migrate_ksm(newfolio, folio);
ksm: make KSM page migration possible KSM page migration is already supported in the case of memory hotremove, which takes the ksm_thread_mutex across all its migrations to keep life simple. But the new KSM NUMA merge_across_nodes knob introduces a problem, when it's set to non-default 0: if a KSM page is migrated to a different NUMA node, how do we migrate its stable node to the right tree? And what if that collides with an existing stable node? So far there's no provision for that, and this patch does not attempt to deal with it either. But how will I test a solution, when I don't know how to hotremove memory? The best answer is to enable KSM page migration in all cases now, and test more common cases. With THP and compaction added since KSM came in, page migration is now mainstream, and it's a shame that a KSM page can frustrate freeing a page block. Without worrying about merge_across_nodes 0 for now, this patch gets KSM page migration working reliably for default merge_across_nodes 1 (but leave the patch enabling it until near the end of the series). It's much simpler than I'd originally imagined, and does not require an additional tier of locking: page migration relies on the page lock, KSM page reclaim relies on the page lock, the page lock is enough for KSM page migration too. Almost all the care has to be in get_ksm_page(): that's the function which worries about when a stable node is stale and should be freed, now it also has to worry about the KSM page being migrated. The only new overhead is an additional put/get/lock/unlock_page when stable_tree_search() arrives at a matching node: to make sure migration respects the raised page count, and so does not migrate the page while we're busy with it here. That's probably avoidable, either by changing internal interfaces from using kpage to stable_node, or by moving the ksm_migrate_page() callsite into a page_freeze_refs() section (even if not swapcache); but this works well, I've no urge to pull it apart now. (Descents of the stable tree may pass through nodes whose KSM pages are under migration: being unlocked, the raised page count does not prevent that, nor need it: it's safe to memcmp against either old or new page.) You might worry about mremap, and whether page migration's rmap_walk to remove migration entries will find all the KSM locations where it inserted earlier: that should already be handled, by the satisfyingly heavy hammer of move_vma()'s call to ksm_madvise(,,,MADV_UNMERGEABLE,). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:35:10 +00:00
/*
* Please do not reorder this without considering how mm/ksm.c's
* ksm_get_folio() depends upon ksm_migrate_page() and the
* swapcache flag.
ksm: make KSM page migration possible KSM page migration is already supported in the case of memory hotremove, which takes the ksm_thread_mutex across all its migrations to keep life simple. But the new KSM NUMA merge_across_nodes knob introduces a problem, when it's set to non-default 0: if a KSM page is migrated to a different NUMA node, how do we migrate its stable node to the right tree? And what if that collides with an existing stable node? So far there's no provision for that, and this patch does not attempt to deal with it either. But how will I test a solution, when I don't know how to hotremove memory? The best answer is to enable KSM page migration in all cases now, and test more common cases. With THP and compaction added since KSM came in, page migration is now mainstream, and it's a shame that a KSM page can frustrate freeing a page block. Without worrying about merge_across_nodes 0 for now, this patch gets KSM page migration working reliably for default merge_across_nodes 1 (but leave the patch enabling it until near the end of the series). It's much simpler than I'd originally imagined, and does not require an additional tier of locking: page migration relies on the page lock, KSM page reclaim relies on the page lock, the page lock is enough for KSM page migration too. Almost all the care has to be in get_ksm_page(): that's the function which worries about when a stable node is stale and should be freed, now it also has to worry about the KSM page being migrated. The only new overhead is an additional put/get/lock/unlock_page when stable_tree_search() arrives at a matching node: to make sure migration respects the raised page count, and so does not migrate the page while we're busy with it here. That's probably avoidable, either by changing internal interfaces from using kpage to stable_node, or by moving the ksm_migrate_page() callsite into a page_freeze_refs() section (even if not swapcache); but this works well, I've no urge to pull it apart now. (Descents of the stable tree may pass through nodes whose KSM pages are under migration: being unlocked, the raised page count does not prevent that, nor need it: it's safe to memcmp against either old or new page.) You might worry about mremap, and whether page migration's rmap_walk to remove migration entries will find all the KSM locations where it inserted earlier: that should already be handled, by the satisfyingly heavy hammer of move_vma()'s call to ksm_madvise(,,,MADV_UNMERGEABLE,). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 00:35:10 +00:00
*/
if (folio_test_swapcache(folio))
folio_clear_swapcache(folio);
folio_clear_private(folio);
mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page When we free a HugeTLB page to the buddy allocator, we need to allocate the vmemmap pages associated with it. However, we may not be able to allocate the vmemmap pages when the system is under memory pressure. In this case, we just refuse to free the HugeTLB page. This changes behavior in some corner cases as listed below: 1) Failing to free a huge page triggered by the user (decrease nr_pages). User needs to try again later. 2) Failing to free a surplus huge page when freed by the application. Try again later when freeing a huge page next time. 3) Failing to dissolve a free huge page on ZONE_MOVABLE via offline_pages(). This can happen when we have plenty of ZONE_MOVABLE memory, but not enough kernel memory to allocate vmemmmap pages. We may even be able to migrate huge page contents, but will not be able to dissolve the source huge page. This will prevent an offline operation and is unfortunate as memory offlining is expected to succeed on movable zones. Users that depend on memory hotplug to succeed for movable zones should carefully consider whether the memory savings gained from this feature are worth the risk of possibly not being able to offline memory in certain situations. 4) Failing to dissolve a huge page on CMA/ZONE_MOVABLE via alloc_contig_range() - once we have that handling in place. Mainly affects CMA and virtio-mem. Similar to 3). virito-mem will handle migration errors gracefully. CMA might be able to fallback on other free areas within the CMA region. Vmemmap pages are allocated from the page freeing context. In order for those allocations to be not disruptive (e.g. trigger oom killer) __GFP_NORETRY is used. hugetlb_lock is dropped for the allocation because a non sleeping allocation would be too fragile and it could fail too easily under memory pressure. GFP_ATOMIC or other modes to access memory reserves is not used because we want to prevent consuming reserves under heavy hugetlb freeing. [mike.kravetz@oracle.com: fix dissolve_free_huge_page use of tail/head page] Link: https://lkml.kernel.org/r/20210527231225.226987-1-mike.kravetz@oracle.com [willy@infradead.org: fix alloc_vmemmap_page_list documentation warning] Link: https://lkml.kernel.org/r/20210615200242.1716568-6-willy@infradead.org Link: https://lkml.kernel.org/r/20210510030027.56044-7-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Barry Song <song.bao.hua@hisilicon.com> Cc: Bodeddula Balasubramaniam <bodeddub@amazon.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Chen Huang <chenhuang5@huawei.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: HORIGUCHI NAOYA <naoya.horiguchi@nec.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:47:21 +00:00
/* page->private contains hugetlb specific flags */
if (!folio_test_hugetlb(folio))
folio->private = NULL;
/*
* If any waiters have accumulated on the new page then
* wake them up.
*/
if (folio_test_writeback(newfolio))
folio_end_writeback(newfolio);
/*
* PG_readahead shares the same bit with PG_reclaim. The above
* end_page_writeback() may clear PG_readahead mistakenly, so set the
* bit after that.
*/
if (folio_test_readahead(folio))
folio_set_readahead(newfolio);
folio_copy_owner(newfolio, folio);
hugetlb: memcg: account hugetlb-backed memory in memory controller Currently, hugetlb memory usage is not acounted for in the memory controller, which could lead to memory overprotection for cgroups with hugetlb-backed memory. This has been observed in our production system. For instance, here is one of our usecases: suppose there are two 32G containers. The machine is booted with hugetlb_cma=6G, and each container may or may not use up to 3 gigantic page, depending on the workload within it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup limit of each cgroup to 3G to enforce hugetlb fairness. But it is very difficult to configure memory.max to keep overall consumption, including anon, cache, slab etc. fair. What we have had to resort to is to constantly poll hugetlb usage and readjust memory.max. Similar procedure is done to other memory limits (memory.low for e.g). However, this is rather cumbersome and buggy. Furthermore, when there is a delay in memory limits correction, (for e.g when hugetlb usage changes within consecutive runs of the userspace agent), the system could be in an over/underprotected state. This patch rectifies this issue by charging the memcg when the hugetlb folio is utilized, and uncharging when the folio is freed (analogous to the hugetlb controller). Note that we do not charge when the folio is allocated to the hugetlb pool, because at this point it is not owned by any memcg. Some caveats to consider: * This feature is only available on cgroup v2. * There is no hugetlb pool management involved in the memory controller. As stated above, hugetlb folios are only charged towards the memory controller when it is used. Host overcommit management has to consider it when configuring hard limits. * Failure to charge towards the memcg results in SIGBUS. This could happen even if the hugetlb pool still has pages (but the cgroup limit is hit and reclaim attempt fails). * When this feature is enabled, hugetlb pages contribute to memory reclaim protection. low, min limits tuning must take into account hugetlb memory. * Hugetlb pages utilized while this option is not selected will not be tracked by the memory controller (even if cgroup v2 is remounted later on). Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com Signed-off-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Frank van der Linden <fvdl@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tejun heo <tj@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 18:46:28 +00:00
mem_cgroup_migrate(folio, newfolio);
}
EXPORT_SYMBOL(folio_migrate_flags);
mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPY Introduce a new migration mode that allow to offload the copy to a device DMA engine. This changes the workflow of migration and not all address_space migratepage callback can support this. This is intended to be use by migrate_vma() which itself is use for thing like HMM (see include/linux/hmm.h). No additional per-filesystem migratepage testing is needed. I disables MIGRATE_SYNC_NO_COPY in all problematic migratepage() callback and i added comment in those to explain why (part of this patch). The commit message is unclear it should say that any callback that wish to support this new mode need to be aware of the difference in the migration flow from other mode. Some of these callbacks do extra locking while copying (aio, zsmalloc, balloon, ...) and for DMA to be effective you want to copy multiple pages in one DMA operations. But in the problematic case you can not easily hold the extra lock accross multiple call to this callback. Usual flow is: For each page { 1 - lock page 2 - call migratepage() callback 3 - (extra locking in some migratepage() callback) 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) 5 - copy page 6 - (unlock any extra lock of migratepage() callback) 7 - return from migratepage() callback 8 - unlock page } The new mode MIGRATE_SYNC_NO_COPY: 1 - lock multiple pages For each page { 2 - call migratepage() callback 3 - abort in all problematic migratepage() callback 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) } // finished all calls to migratepage() callback 5 - DMA copy multiple pages 6 - unlock all the pages To support MIGRATE_SYNC_NO_COPY in the problematic case we would need a new callback migratepages() (for instance) that deals with multiple pages in one transaction. Because the problematic cases are not important for current usage I did not wanted to complexify this patchset even more for no good reason. Link: http://lkml.kernel.org/r/20170817000548.32038-14-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:12:06 +00:00
/************************************************************
* Migration functions
***********************************************************/
static int __migrate_folio(struct address_space *mapping, struct folio *dst,
struct folio *src, void *src_private,
enum migrate_mode mode)
mm/memory.c: fix race when faulting a device private page Patch series "Fix several device private page reference counting issues", v2 This series aims to fix a number of page reference counting issues in drivers dealing with device private ZONE_DEVICE pages. These result in use-after-free type bugs, either from accessing a struct page which no longer exists because it has been removed or accessing fields within the struct page which are no longer valid because the page has been freed. During normal usage it is unlikely these will cause any problems. However without these fixes it is possible to crash the kernel from userspace. These crashes can be triggered either by unloading the kernel module or unbinding the device from the driver prior to a userspace task exiting. In modules such as Nouveau it is also possible to trigger some of these issues by explicitly closing the device file-descriptor prior to the task exiting and then accessing device private memory. This involves some minor changes to both PowerPC and AMD GPU code. Unfortunately I lack hardware to test either of those so any help there would be appreciated. The changes mimic what is done in for both Nouveau and hmm-tests though so I doubt they will cause problems. This patch (of 8): When the CPU tries to access a device private page the migrate_to_ram() callback associated with the pgmap for the page is called. However no reference is taken on the faulting page. Therefore a concurrent migration of the device private page can free the page and possibly the underlying pgmap. This results in a race which can crash the kernel due to the migrate_to_ram() function pointer becoming invalid. It also means drivers can't reliably read the zone_device_data field because the page may have been freed with memunmap_pages(). Close the race by getting a reference on the page while holding the ptl to ensure it has not been freed. Unfortunately the elevated reference count will cause the migration required to handle the fault to fail. To avoid this failure pass the faulting page into the migrate_vma functions so that if an elevated reference count is found it can be checked to see if it's expected or not. [mpe@ellerman.id.au: fix build] Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Lyude Paul <lyude@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28 12:01:15 +00:00
{
mm: migrate: support poisoned recover from migrate folio The folio migration is widely used in kernel, memory compaction, memory hotplug, soft offline page, numa balance, memory demote/promotion, etc, but once access a poisoned source folio when migrating, the kerenl will panic. There is a mechanism in the kernel to recover from uncorrectable memory errors, ARCH_HAS_COPY_MC, which is already used in other core-mm paths, eg, CoW, khugepaged, coredump, ksm copy, see copy_mc_to_{user,kernel}, copy_mc_{user_}highpage callers. In order to support poisoned folio copy recover from migrate folio, we chose to make folio migration tolerant of memory failures and return error for folio migration, because folio migration is no guarantee of success, this could avoid the similar panic shown below. CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0 pc : copy_page+0x10/0xc0 lr : copy_highpage+0x38/0x50 ... Call trace: copy_page+0x10/0xc0 folio_copy+0x78/0x90 migrate_folio_extra+0x54/0xa0 move_to_new_folio+0xd8/0x1f0 migrate_folio_move+0xb8/0x300 migrate_pages_batch+0x528/0x788 migrate_pages_sync+0x8c/0x258 migrate_pages+0x440/0x528 soft_offline_in_use_page+0x2ec/0x3c0 soft_offline_page+0x238/0x310 soft_offline_page_store+0x6c/0xc0 dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x130/0x1c8 new_sync_write+0xa4/0x138 vfs_write+0x238/0x2d8 ksys_write+0x74/0x110 Note, folio copy is moved in the begin of the __migrate_folio(), which could simplify the error handling since there is no turning back if folio_migrate_mapping() return success, the downside is the folio copied even though folio_migrate_mapping() return fail, an optimization is to check whether source folio does not have extra refs before we do folio copy. Link: https://lkml.kernel.org/r/20240626085328.608006-5-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 08:53:26 +00:00
int rc, expected_count = folio_expected_refs(mapping, src);
mm/memory.c: fix race when faulting a device private page Patch series "Fix several device private page reference counting issues", v2 This series aims to fix a number of page reference counting issues in drivers dealing with device private ZONE_DEVICE pages. These result in use-after-free type bugs, either from accessing a struct page which no longer exists because it has been removed or accessing fields within the struct page which are no longer valid because the page has been freed. During normal usage it is unlikely these will cause any problems. However without these fixes it is possible to crash the kernel from userspace. These crashes can be triggered either by unloading the kernel module or unbinding the device from the driver prior to a userspace task exiting. In modules such as Nouveau it is also possible to trigger some of these issues by explicitly closing the device file-descriptor prior to the task exiting and then accessing device private memory. This involves some minor changes to both PowerPC and AMD GPU code. Unfortunately I lack hardware to test either of those so any help there would be appreciated. The changes mimic what is done in for both Nouveau and hmm-tests though so I doubt they will cause problems. This patch (of 8): When the CPU tries to access a device private page the migrate_to_ram() callback associated with the pgmap for the page is called. However no reference is taken on the faulting page. Therefore a concurrent migration of the device private page can free the page and possibly the underlying pgmap. This results in a race which can crash the kernel due to the migrate_to_ram() function pointer becoming invalid. It also means drivers can't reliably read the zone_device_data field because the page may have been freed with memunmap_pages(). Close the race by getting a reference on the page while holding the ptl to ensure it has not been freed. Unfortunately the elevated reference count will cause the migration required to handle the fault to fail. To avoid this failure pass the faulting page into the migrate_vma functions so that if an elevated reference count is found it can be checked to see if it's expected or not. [mpe@ellerman.id.au: fix build] Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Lyude Paul <lyude@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28 12:01:15 +00:00
mm: migrate: support poisoned recover from migrate folio The folio migration is widely used in kernel, memory compaction, memory hotplug, soft offline page, numa balance, memory demote/promotion, etc, but once access a poisoned source folio when migrating, the kerenl will panic. There is a mechanism in the kernel to recover from uncorrectable memory errors, ARCH_HAS_COPY_MC, which is already used in other core-mm paths, eg, CoW, khugepaged, coredump, ksm copy, see copy_mc_to_{user,kernel}, copy_mc_{user_}highpage callers. In order to support poisoned folio copy recover from migrate folio, we chose to make folio migration tolerant of memory failures and return error for folio migration, because folio migration is no guarantee of success, this could avoid the similar panic shown below. CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0 pc : copy_page+0x10/0xc0 lr : copy_highpage+0x38/0x50 ... Call trace: copy_page+0x10/0xc0 folio_copy+0x78/0x90 migrate_folio_extra+0x54/0xa0 move_to_new_folio+0xd8/0x1f0 migrate_folio_move+0xb8/0x300 migrate_pages_batch+0x528/0x788 migrate_pages_sync+0x8c/0x258 migrate_pages+0x440/0x528 soft_offline_in_use_page+0x2ec/0x3c0 soft_offline_page+0x238/0x310 soft_offline_page_store+0x6c/0xc0 dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x130/0x1c8 new_sync_write+0xa4/0x138 vfs_write+0x238/0x2d8 ksys_write+0x74/0x110 Note, folio copy is moved in the begin of the __migrate_folio(), which could simplify the error handling since there is no turning back if folio_migrate_mapping() return success, the downside is the folio copied even though folio_migrate_mapping() return fail, an optimization is to check whether source folio does not have extra refs before we do folio copy. Link: https://lkml.kernel.org/r/20240626085328.608006-5-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 08:53:26 +00:00
/* Check whether src does not have extra refs before we do more work */
if (folio_ref_count(src) != expected_count)
return -EAGAIN;
mm/memory.c: fix race when faulting a device private page Patch series "Fix several device private page reference counting issues", v2 This series aims to fix a number of page reference counting issues in drivers dealing with device private ZONE_DEVICE pages. These result in use-after-free type bugs, either from accessing a struct page which no longer exists because it has been removed or accessing fields within the struct page which are no longer valid because the page has been freed. During normal usage it is unlikely these will cause any problems. However without these fixes it is possible to crash the kernel from userspace. These crashes can be triggered either by unloading the kernel module or unbinding the device from the driver prior to a userspace task exiting. In modules such as Nouveau it is also possible to trigger some of these issues by explicitly closing the device file-descriptor prior to the task exiting and then accessing device private memory. This involves some minor changes to both PowerPC and AMD GPU code. Unfortunately I lack hardware to test either of those so any help there would be appreciated. The changes mimic what is done in for both Nouveau and hmm-tests though so I doubt they will cause problems. This patch (of 8): When the CPU tries to access a device private page the migrate_to_ram() callback associated with the pgmap for the page is called. However no reference is taken on the faulting page. Therefore a concurrent migration of the device private page can free the page and possibly the underlying pgmap. This results in a race which can crash the kernel due to the migrate_to_ram() function pointer becoming invalid. It also means drivers can't reliably read the zone_device_data field because the page may have been freed with memunmap_pages(). Close the race by getting a reference on the page while holding the ptl to ensure it has not been freed. Unfortunately the elevated reference count will cause the migration required to handle the fault to fail. To avoid this failure pass the faulting page into the migrate_vma functions so that if an elevated reference count is found it can be checked to see if it's expected or not. [mpe@ellerman.id.au: fix build] Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Lyude Paul <lyude@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28 12:01:15 +00:00
mm: migrate: support poisoned recover from migrate folio The folio migration is widely used in kernel, memory compaction, memory hotplug, soft offline page, numa balance, memory demote/promotion, etc, but once access a poisoned source folio when migrating, the kerenl will panic. There is a mechanism in the kernel to recover from uncorrectable memory errors, ARCH_HAS_COPY_MC, which is already used in other core-mm paths, eg, CoW, khugepaged, coredump, ksm copy, see copy_mc_to_{user,kernel}, copy_mc_{user_}highpage callers. In order to support poisoned folio copy recover from migrate folio, we chose to make folio migration tolerant of memory failures and return error for folio migration, because folio migration is no guarantee of success, this could avoid the similar panic shown below. CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0 pc : copy_page+0x10/0xc0 lr : copy_highpage+0x38/0x50 ... Call trace: copy_page+0x10/0xc0 folio_copy+0x78/0x90 migrate_folio_extra+0x54/0xa0 move_to_new_folio+0xd8/0x1f0 migrate_folio_move+0xb8/0x300 migrate_pages_batch+0x528/0x788 migrate_pages_sync+0x8c/0x258 migrate_pages+0x440/0x528 soft_offline_in_use_page+0x2ec/0x3c0 soft_offline_page+0x238/0x310 soft_offline_page_store+0x6c/0xc0 dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x130/0x1c8 new_sync_write+0xa4/0x138 vfs_write+0x238/0x2d8 ksys_write+0x74/0x110 Note, folio copy is moved in the begin of the __migrate_folio(), which could simplify the error handling since there is no turning back if folio_migrate_mapping() return success, the downside is the folio copied even though folio_migrate_mapping() return fail, an optimization is to check whether source folio does not have extra refs before we do folio copy. Link: https://lkml.kernel.org/r/20240626085328.608006-5-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 08:53:26 +00:00
rc = folio_mc_copy(dst, src);
if (unlikely(rc))
return rc;
mm/memory.c: fix race when faulting a device private page Patch series "Fix several device private page reference counting issues", v2 This series aims to fix a number of page reference counting issues in drivers dealing with device private ZONE_DEVICE pages. These result in use-after-free type bugs, either from accessing a struct page which no longer exists because it has been removed or accessing fields within the struct page which are no longer valid because the page has been freed. During normal usage it is unlikely these will cause any problems. However without these fixes it is possible to crash the kernel from userspace. These crashes can be triggered either by unloading the kernel module or unbinding the device from the driver prior to a userspace task exiting. In modules such as Nouveau it is also possible to trigger some of these issues by explicitly closing the device file-descriptor prior to the task exiting and then accessing device private memory. This involves some minor changes to both PowerPC and AMD GPU code. Unfortunately I lack hardware to test either of those so any help there would be appreciated. The changes mimic what is done in for both Nouveau and hmm-tests though so I doubt they will cause problems. This patch (of 8): When the CPU tries to access a device private page the migrate_to_ram() callback associated with the pgmap for the page is called. However no reference is taken on the faulting page. Therefore a concurrent migration of the device private page can free the page and possibly the underlying pgmap. This results in a race which can crash the kernel due to the migrate_to_ram() function pointer becoming invalid. It also means drivers can't reliably read the zone_device_data field because the page may have been freed with memunmap_pages(). Close the race by getting a reference on the page while holding the ptl to ensure it has not been freed. Unfortunately the elevated reference count will cause the migration required to handle the fault to fail. To avoid this failure pass the faulting page into the migrate_vma functions so that if an elevated reference count is found it can be checked to see if it's expected or not. [mpe@ellerman.id.au: fix build] Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Lyude Paul <lyude@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28 12:01:15 +00:00
mm: migrate: support poisoned recover from migrate folio The folio migration is widely used in kernel, memory compaction, memory hotplug, soft offline page, numa balance, memory demote/promotion, etc, but once access a poisoned source folio when migrating, the kerenl will panic. There is a mechanism in the kernel to recover from uncorrectable memory errors, ARCH_HAS_COPY_MC, which is already used in other core-mm paths, eg, CoW, khugepaged, coredump, ksm copy, see copy_mc_to_{user,kernel}, copy_mc_{user_}highpage callers. In order to support poisoned folio copy recover from migrate folio, we chose to make folio migration tolerant of memory failures and return error for folio migration, because folio migration is no guarantee of success, this could avoid the similar panic shown below. CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0 pc : copy_page+0x10/0xc0 lr : copy_highpage+0x38/0x50 ... Call trace: copy_page+0x10/0xc0 folio_copy+0x78/0x90 migrate_folio_extra+0x54/0xa0 move_to_new_folio+0xd8/0x1f0 migrate_folio_move+0xb8/0x300 migrate_pages_batch+0x528/0x788 migrate_pages_sync+0x8c/0x258 migrate_pages+0x440/0x528 soft_offline_in_use_page+0x2ec/0x3c0 soft_offline_page+0x238/0x310 soft_offline_page_store+0x6c/0xc0 dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x130/0x1c8 new_sync_write+0xa4/0x138 vfs_write+0x238/0x2d8 ksys_write+0x74/0x110 Note, folio copy is moved in the begin of the __migrate_folio(), which could simplify the error handling since there is no turning back if folio_migrate_mapping() return success, the downside is the folio copied even though folio_migrate_mapping() return fail, an optimization is to check whether source folio does not have extra refs before we do folio copy. Link: https://lkml.kernel.org/r/20240626085328.608006-5-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 08:53:26 +00:00
rc = __folio_migrate_mapping(mapping, dst, src, expected_count);
mm/memory.c: fix race when faulting a device private page Patch series "Fix several device private page reference counting issues", v2 This series aims to fix a number of page reference counting issues in drivers dealing with device private ZONE_DEVICE pages. These result in use-after-free type bugs, either from accessing a struct page which no longer exists because it has been removed or accessing fields within the struct page which are no longer valid because the page has been freed. During normal usage it is unlikely these will cause any problems. However without these fixes it is possible to crash the kernel from userspace. These crashes can be triggered either by unloading the kernel module or unbinding the device from the driver prior to a userspace task exiting. In modules such as Nouveau it is also possible to trigger some of these issues by explicitly closing the device file-descriptor prior to the task exiting and then accessing device private memory. This involves some minor changes to both PowerPC and AMD GPU code. Unfortunately I lack hardware to test either of those so any help there would be appreciated. The changes mimic what is done in for both Nouveau and hmm-tests though so I doubt they will cause problems. This patch (of 8): When the CPU tries to access a device private page the migrate_to_ram() callback associated with the pgmap for the page is called. However no reference is taken on the faulting page. Therefore a concurrent migration of the device private page can free the page and possibly the underlying pgmap. This results in a race which can crash the kernel due to the migrate_to_ram() function pointer becoming invalid. It also means drivers can't reliably read the zone_device_data field because the page may have been freed with memunmap_pages(). Close the race by getting a reference on the page while holding the ptl to ensure it has not been freed. Unfortunately the elevated reference count will cause the migration required to handle the fault to fail. To avoid this failure pass the faulting page into the migrate_vma functions so that if an elevated reference count is found it can be checked to see if it's expected or not. [mpe@ellerman.id.au: fix build] Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Lyude Paul <lyude@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28 12:01:15 +00:00
if (rc != MIGRATEPAGE_SUCCESS)
return rc;
if (src_private)
folio_attach_private(dst, folio_detach_private(src));
mm: migrate: support poisoned recover from migrate folio The folio migration is widely used in kernel, memory compaction, memory hotplug, soft offline page, numa balance, memory demote/promotion, etc, but once access a poisoned source folio when migrating, the kerenl will panic. There is a mechanism in the kernel to recover from uncorrectable memory errors, ARCH_HAS_COPY_MC, which is already used in other core-mm paths, eg, CoW, khugepaged, coredump, ksm copy, see copy_mc_to_{user,kernel}, copy_mc_{user_}highpage callers. In order to support poisoned folio copy recover from migrate folio, we chose to make folio migration tolerant of memory failures and return error for folio migration, because folio migration is no guarantee of success, this could avoid the similar panic shown below. CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0 pc : copy_page+0x10/0xc0 lr : copy_highpage+0x38/0x50 ... Call trace: copy_page+0x10/0xc0 folio_copy+0x78/0x90 migrate_folio_extra+0x54/0xa0 move_to_new_folio+0xd8/0x1f0 migrate_folio_move+0xb8/0x300 migrate_pages_batch+0x528/0x788 migrate_pages_sync+0x8c/0x258 migrate_pages+0x440/0x528 soft_offline_in_use_page+0x2ec/0x3c0 soft_offline_page+0x238/0x310 soft_offline_page_store+0x6c/0xc0 dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x130/0x1c8 new_sync_write+0xa4/0x138 vfs_write+0x238/0x2d8 ksys_write+0x74/0x110 Note, folio copy is moved in the begin of the __migrate_folio(), which could simplify the error handling since there is no turning back if folio_migrate_mapping() return success, the downside is the folio copied even though folio_migrate_mapping() return fail, an optimization is to check whether source folio does not have extra refs before we do folio copy. Link: https://lkml.kernel.org/r/20240626085328.608006-5-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiaqi Yan <jiaqiyan@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 08:53:26 +00:00
folio_migrate_flags(dst, src);
mm/memory.c: fix race when faulting a device private page Patch series "Fix several device private page reference counting issues", v2 This series aims to fix a number of page reference counting issues in drivers dealing with device private ZONE_DEVICE pages. These result in use-after-free type bugs, either from accessing a struct page which no longer exists because it has been removed or accessing fields within the struct page which are no longer valid because the page has been freed. During normal usage it is unlikely these will cause any problems. However without these fixes it is possible to crash the kernel from userspace. These crashes can be triggered either by unloading the kernel module or unbinding the device from the driver prior to a userspace task exiting. In modules such as Nouveau it is also possible to trigger some of these issues by explicitly closing the device file-descriptor prior to the task exiting and then accessing device private memory. This involves some minor changes to both PowerPC and AMD GPU code. Unfortunately I lack hardware to test either of those so any help there would be appreciated. The changes mimic what is done in for both Nouveau and hmm-tests though so I doubt they will cause problems. This patch (of 8): When the CPU tries to access a device private page the migrate_to_ram() callback associated with the pgmap for the page is called. However no reference is taken on the faulting page. Therefore a concurrent migration of the device private page can free the page and possibly the underlying pgmap. This results in a race which can crash the kernel due to the migrate_to_ram() function pointer becoming invalid. It also means drivers can't reliably read the zone_device_data field because the page may have been freed with memunmap_pages(). Close the race by getting a reference on the page while holding the ptl to ensure it has not been freed. Unfortunately the elevated reference count will cause the migration required to handle the fault to fail. To avoid this failure pass the faulting page into the migrate_vma functions so that if an elevated reference count is found it can be checked to see if it's expected or not. [mpe@ellerman.id.au: fix build] Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Lyude Paul <lyude@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28 12:01:15 +00:00
return MIGRATEPAGE_SUCCESS;
}
/**
* migrate_folio() - Simple folio migration.
* @mapping: The address_space containing the folio.
* @dst: The folio to migrate the data to.
* @src: The folio containing the current data.
* @mode: How to migrate the page.
*
* Common logic to directly migrate a single LRU folio suitable for
* folios that do not use PagePrivate/PagePrivate2.
*
* Folios are locked upon entry and exit.
*/
int migrate_folio(struct address_space *mapping, struct folio *dst,
struct folio *src, enum migrate_mode mode)
{
BUG_ON(folio_test_writeback(src)); /* Writeback must be complete */
return __migrate_folio(mapping, dst, src, NULL, mode);
}
EXPORT_SYMBOL(migrate_folio);
#ifdef CONFIG_BUFFER_HEAD
/* Returns true if all buffers are successfully locked */
static bool buffer_migrate_lock_buffers(struct buffer_head *head,
enum migrate_mode mode)
{
struct buffer_head *bh = head;
migrate_pages: avoid blocking for IO in MIGRATE_SYNC_LIGHT The MIGRATE_SYNC_LIGHT mode is intended to block for things that will finish quickly but not for things that will take a long time. Exactly how long is too long is not well defined, but waits of tens of milliseconds is likely non-ideal. When putting a Chromebook under memory pressure (opening over 90 tabs on a 4GB machine) it was fairly easy to see delays waiting for some locks in the kcompactd code path of > 100 ms. While the laptop wasn't amazingly usable in this state, it was still limping along and this state isn't something artificial. Sometimes we simply end up with a lot of memory pressure. Putting the same Chromebook under memory pressure while it was running Android apps (though not stressing them) showed a much worse result (NOTE: this was on a older kernel but the codepaths here are similar). Android apps on ChromeOS currently run from a 128K-block, zlib-compressed, loopback-mounted squashfs disk. If we get a page fault from something backed by the squashfs filesystem we could end up holding a folio lock while reading enough from disk to decompress 128K (and then decompressing it using the somewhat slow zlib algorithms). That reading goes through the ext4 subsystem (because it's a loopback mount) before eventually ending up in the block subsystem. This extra jaunt adds extra overhead. Without much work I could see cases where we ended up blocked on a folio lock for over a second. With more extreme memory pressure I could see up to 25 seconds. We considered adding a timeout in the case of MIGRATE_SYNC_LIGHT for the two locks that were seen to be slow [1] and that generated much discussion. After discussion, it was decided that we should avoid waiting for the two locks during MIGRATE_SYNC_LIGHT if they were being held for IO. We'll continue with the unbounded wait for the more full SYNC modes. With this change, I couldn't see any slow waits on these locks with my previous testcases. NOTE: The reason I stated digging into this originally isn't because some benchmark had gone awry, but because we've received in-the-field crash reports where we have a hung task waiting on the page lock (which is the equivalent code path on old kernels). While the root cause of those crashes is likely unrelated and won't be fixed by this patch, analyzing those crash reports did point out these very long waits seemed like something good to fix. With this patch we should no longer hang waiting on these locks, but presumably the system will still be in a bad shape and hang somewhere else. [1] https://lore.kernel.org/r/20230421151135.v2.1.I2b71e11264c5c214bc59744b9e13e4c353bc5714@changeid Link: https://lkml.kernel.org/r/20230428135414.v3.1.Ia86ccac02a303154a0b8bc60567e7a95d34c96d3@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Hillf Danton <hdanton@sina.com> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-28 20:54:38 +00:00
struct buffer_head *failed_bh;
do {
if (!trylock_buffer(bh)) {
migrate_pages: avoid blocking for IO in MIGRATE_SYNC_LIGHT The MIGRATE_SYNC_LIGHT mode is intended to block for things that will finish quickly but not for things that will take a long time. Exactly how long is too long is not well defined, but waits of tens of milliseconds is likely non-ideal. When putting a Chromebook under memory pressure (opening over 90 tabs on a 4GB machine) it was fairly easy to see delays waiting for some locks in the kcompactd code path of > 100 ms. While the laptop wasn't amazingly usable in this state, it was still limping along and this state isn't something artificial. Sometimes we simply end up with a lot of memory pressure. Putting the same Chromebook under memory pressure while it was running Android apps (though not stressing them) showed a much worse result (NOTE: this was on a older kernel but the codepaths here are similar). Android apps on ChromeOS currently run from a 128K-block, zlib-compressed, loopback-mounted squashfs disk. If we get a page fault from something backed by the squashfs filesystem we could end up holding a folio lock while reading enough from disk to decompress 128K (and then decompressing it using the somewhat slow zlib algorithms). That reading goes through the ext4 subsystem (because it's a loopback mount) before eventually ending up in the block subsystem. This extra jaunt adds extra overhead. Without much work I could see cases where we ended up blocked on a folio lock for over a second. With more extreme memory pressure I could see up to 25 seconds. We considered adding a timeout in the case of MIGRATE_SYNC_LIGHT for the two locks that were seen to be slow [1] and that generated much discussion. After discussion, it was decided that we should avoid waiting for the two locks during MIGRATE_SYNC_LIGHT if they were being held for IO. We'll continue with the unbounded wait for the more full SYNC modes. With this change, I couldn't see any slow waits on these locks with my previous testcases. NOTE: The reason I stated digging into this originally isn't because some benchmark had gone awry, but because we've received in-the-field crash reports where we have a hung task waiting on the page lock (which is the equivalent code path on old kernels). While the root cause of those crashes is likely unrelated and won't be fixed by this patch, analyzing those crash reports did point out these very long waits seemed like something good to fix. With this patch we should no longer hang waiting on these locks, but presumably the system will still be in a bad shape and hang somewhere else. [1] https://lore.kernel.org/r/20230421151135.v2.1.I2b71e11264c5c214bc59744b9e13e4c353bc5714@changeid Link: https://lkml.kernel.org/r/20230428135414.v3.1.Ia86ccac02a303154a0b8bc60567e7a95d34c96d3@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Hillf Danton <hdanton@sina.com> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-28 20:54:38 +00:00
if (mode == MIGRATE_ASYNC)
goto unlock;
if (mode == MIGRATE_SYNC_LIGHT && !buffer_uptodate(bh))
goto unlock;
lock_buffer(bh);
}
bh = bh->b_this_page;
} while (bh != head);
migrate_pages: avoid blocking for IO in MIGRATE_SYNC_LIGHT The MIGRATE_SYNC_LIGHT mode is intended to block for things that will finish quickly but not for things that will take a long time. Exactly how long is too long is not well defined, but waits of tens of milliseconds is likely non-ideal. When putting a Chromebook under memory pressure (opening over 90 tabs on a 4GB machine) it was fairly easy to see delays waiting for some locks in the kcompactd code path of > 100 ms. While the laptop wasn't amazingly usable in this state, it was still limping along and this state isn't something artificial. Sometimes we simply end up with a lot of memory pressure. Putting the same Chromebook under memory pressure while it was running Android apps (though not stressing them) showed a much worse result (NOTE: this was on a older kernel but the codepaths here are similar). Android apps on ChromeOS currently run from a 128K-block, zlib-compressed, loopback-mounted squashfs disk. If we get a page fault from something backed by the squashfs filesystem we could end up holding a folio lock while reading enough from disk to decompress 128K (and then decompressing it using the somewhat slow zlib algorithms). That reading goes through the ext4 subsystem (because it's a loopback mount) before eventually ending up in the block subsystem. This extra jaunt adds extra overhead. Without much work I could see cases where we ended up blocked on a folio lock for over a second. With more extreme memory pressure I could see up to 25 seconds. We considered adding a timeout in the case of MIGRATE_SYNC_LIGHT for the two locks that were seen to be slow [1] and that generated much discussion. After discussion, it was decided that we should avoid waiting for the two locks during MIGRATE_SYNC_LIGHT if they were being held for IO. We'll continue with the unbounded wait for the more full SYNC modes. With this change, I couldn't see any slow waits on these locks with my previous testcases. NOTE: The reason I stated digging into this originally isn't because some benchmark had gone awry, but because we've received in-the-field crash reports where we have a hung task waiting on the page lock (which is the equivalent code path on old kernels). While the root cause of those crashes is likely unrelated and won't be fixed by this patch, analyzing those crash reports did point out these very long waits seemed like something good to fix. With this patch we should no longer hang waiting on these locks, but presumably the system will still be in a bad shape and hang somewhere else. [1] https://lore.kernel.org/r/20230421151135.v2.1.I2b71e11264c5c214bc59744b9e13e4c353bc5714@changeid Link: https://lkml.kernel.org/r/20230428135414.v3.1.Ia86ccac02a303154a0b8bc60567e7a95d34c96d3@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Hillf Danton <hdanton@sina.com> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-28 20:54:38 +00:00
return true;
migrate_pages: avoid blocking for IO in MIGRATE_SYNC_LIGHT The MIGRATE_SYNC_LIGHT mode is intended to block for things that will finish quickly but not for things that will take a long time. Exactly how long is too long is not well defined, but waits of tens of milliseconds is likely non-ideal. When putting a Chromebook under memory pressure (opening over 90 tabs on a 4GB machine) it was fairly easy to see delays waiting for some locks in the kcompactd code path of > 100 ms. While the laptop wasn't amazingly usable in this state, it was still limping along and this state isn't something artificial. Sometimes we simply end up with a lot of memory pressure. Putting the same Chromebook under memory pressure while it was running Android apps (though not stressing them) showed a much worse result (NOTE: this was on a older kernel but the codepaths here are similar). Android apps on ChromeOS currently run from a 128K-block, zlib-compressed, loopback-mounted squashfs disk. If we get a page fault from something backed by the squashfs filesystem we could end up holding a folio lock while reading enough from disk to decompress 128K (and then decompressing it using the somewhat slow zlib algorithms). That reading goes through the ext4 subsystem (because it's a loopback mount) before eventually ending up in the block subsystem. This extra jaunt adds extra overhead. Without much work I could see cases where we ended up blocked on a folio lock for over a second. With more extreme memory pressure I could see up to 25 seconds. We considered adding a timeout in the case of MIGRATE_SYNC_LIGHT for the two locks that were seen to be slow [1] and that generated much discussion. After discussion, it was decided that we should avoid waiting for the two locks during MIGRATE_SYNC_LIGHT if they were being held for IO. We'll continue with the unbounded wait for the more full SYNC modes. With this change, I couldn't see any slow waits on these locks with my previous testcases. NOTE: The reason I stated digging into this originally isn't because some benchmark had gone awry, but because we've received in-the-field crash reports where we have a hung task waiting on the page lock (which is the equivalent code path on old kernels). While the root cause of those crashes is likely unrelated and won't be fixed by this patch, analyzing those crash reports did point out these very long waits seemed like something good to fix. With this patch we should no longer hang waiting on these locks, but presumably the system will still be in a bad shape and hang somewhere else. [1] https://lore.kernel.org/r/20230421151135.v2.1.I2b71e11264c5c214bc59744b9e13e4c353bc5714@changeid Link: https://lkml.kernel.org/r/20230428135414.v3.1.Ia86ccac02a303154a0b8bc60567e7a95d34c96d3@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Hillf Danton <hdanton@sina.com> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-28 20:54:38 +00:00
unlock:
/* We failed to lock the buffer and cannot stall. */
failed_bh = bh;
bh = head;
while (bh != failed_bh) {
unlock_buffer(bh);
bh = bh->b_this_page;
}
return false;
}
static int __buffer_migrate_folio(struct address_space *mapping,
struct folio *dst, struct folio *src, enum migrate_mode mode,
bool check_refs)
{
struct buffer_head *bh, *head;
int rc;
int expected_count;
head = folio_buffers(src);
if (!head)
return migrate_folio(mapping, dst, src, mode);
/* Check whether page does not have extra refs before we do more work */
expected_count = folio_expected_refs(mapping, src);
if (folio_ref_count(src) != expected_count)
return -EAGAIN;
if (!buffer_migrate_lock_buffers(head, mode))
return -EAGAIN;
if (check_refs) {
bool busy;
bool invalidated = false;
recheck_buffers:
busy = false;
spin_lock(&mapping->i_private_lock);
bh = head;
do {
if (atomic_read(&bh->b_count)) {
busy = true;
break;
}
bh = bh->b_this_page;
} while (bh != head);
if (busy) {
if (invalidated) {
rc = -EAGAIN;
goto unlock_buffers;
}
spin_unlock(&mapping->i_private_lock);
invalidate_bh_lrus();
invalidated = true;
goto recheck_buffers;
}
}
rc = filemap_migrate_folio(mapping, dst, src, mode);
mm: adjust address_space_operations.migratepage() return code Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. This patch-set follows the main idea discussed at 2012 LSFMMS session: "Ballooning for transparent huge pages" -- http://lwn.net/Articles/490114/ to introduce the required changes to the virtio_balloon driver, as well as the changes to the core compaction & migration bits, in order to make those subsystems aware of ballooned pages and allow memory balloon pages become movable within a guest, thus avoiding the aforementioned fragmentation issue Following are numbers that prove this patch benefits on allowing compaction to be more effective at memory ballooned guests. Results for STRESS-HIGHALLOC benchmark, from Mel Gorman's mmtests suite, running on a 4gB RAM KVM guest which was ballooning 512mB RAM in 64mB chunks, at every minute (inflating/deflating), while test was running: ===BEGIN stress-highalloc STRESS-HIGHALLOC highalloc-3.7 highalloc-3.7 rc4-clean rc4-patch Pass 1 55.00 ( 0.00%) 62.00 ( 7.00%) Pass 2 54.00 ( 0.00%) 62.00 ( 8.00%) while Rested 75.00 ( 0.00%) 80.00 ( 5.00%) MMTests Statistics: duration 3.7 3.7 rc4-clean rc4-patch User 1207.59 1207.46 System 1300.55 1299.61 Elapsed 2273.72 2157.06 MMTests Statistics: vmstat 3.7 3.7 rc4-clean rc4-patch Page Ins 3581516 2374368 Page Outs 11148692 10410332 Swap Ins 80 47 Swap Outs 3641 476 Direct pages scanned 37978 33826 Kswapd pages scanned 1828245 1342869 Kswapd pages reclaimed 1710236 1304099 Direct pages reclaimed 32207 31005 Kswapd efficiency 93% 97% Kswapd velocity 804.077 622.546 Direct efficiency 84% 91% Direct velocity 16.703 15.682 Percentage direct scans 2% 2% Page writes by reclaim 79252 9704 Page writes file 75611 9228 Page writes anon 3641 476 Page reclaim immediate 16764 11014 Page rescued immediate 0 0 Slabs scanned 2171904 2152448 Direct inode steals 385 2261 Kswapd inode steals 659137 609670 Kswapd skipped wait 1 69 THP fault alloc 546 631 THP collapse alloc 361 339 THP splits 259 263 THP fault fallback 98 50 THP collapse fail 20 17 Compaction stalls 747 499 Compaction success 244 145 Compaction failures 503 354 Compaction pages moved 370888 474837 Compaction move failure 77378 65259 ===END stress-highalloc This patch: Introduce MIGRATEPAGE_SUCCESS as the default return code for address_space_operations.migratepage() method and documents the expected return code for the same method in failure cases. Signed-off-by: Rafael Aquini <aquini@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 00:02:31 +00:00
if (rc != MIGRATEPAGE_SUCCESS)
goto unlock_buffers;
bh = head;
do {
folio_set_bh(bh, dst, bh_offset(bh));
bh = bh->b_this_page;
} while (bh != head);
unlock_buffers:
mm: migrate: fix reference check race between __find_get_block() and migration buffer_migrate_page_norefs() can race with bh users in the following way: CPU1 CPU2 buffer_migrate_page_norefs() buffer_migrate_lock_buffers() checks bh refs spin_unlock(&mapping->private_lock) __find_get_block() spin_lock(&mapping->private_lock) grab bh ref spin_unlock(&mapping->private_lock) move page do bh work This can result in various issues like lost updates to buffers (i.e. metadata corruption) or use after free issues for the old page. This patch closes the race by holding mapping->private_lock while the mapping is being moved to a new page. Ordinarily, a reference can be taken outside of the private_lock using the per-cpu BH LRU but the references are checked and the LRU invalidated if necessary. The private_lock is held once the references are known so the buffer lookup slow path will spin on the private_lock. Between the page lock and private_lock, it should be impossible for other references to be acquired and updates to happen during the migration. A user had reported data corruption issues on a distribution kernel with a similar page migration implementation as mainline. The data corruption could not be reproduced with this patch applied. A small number of migration-intensive tests were run and no performance problems were noted. [mgorman@techsingularity.net: Changelog, removed tracing] Link: http://lkml.kernel.org/r/20190718090238.GF24383@techsingularity.net Fixes: 89cb0888ca14 "mm: migrate: provide buffer_migrate_page_norefs()" Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03 04:48:47 +00:00
if (check_refs)
spin_unlock(&mapping->i_private_lock);
bh = head;
do {
unlock_buffer(bh);
bh = bh->b_this_page;
} while (bh != head);
return rc;
}
/**
* buffer_migrate_folio() - Migration function for folios with buffers.
* @mapping: The address space containing @src.
* @dst: The folio to migrate to.
* @src: The folio to migrate from.
* @mode: How to migrate the folio.
*
* This function can only be used if the underlying filesystem guarantees
* that no other references to @src exist. For example attached buffer
* heads are accessed only under the folio lock. If your filesystem cannot
* provide this guarantee, buffer_migrate_folio_norefs() may be more
* appropriate.
*
* Return: 0 on success or a negative errno on failure.
*/
int buffer_migrate_folio(struct address_space *mapping,
struct folio *dst, struct folio *src, enum migrate_mode mode)
{
return __buffer_migrate_folio(mapping, dst, src, mode, false);
}
EXPORT_SYMBOL(buffer_migrate_folio);
/**
* buffer_migrate_folio_norefs() - Migration function for folios with buffers.
* @mapping: The address space containing @src.
* @dst: The folio to migrate to.
* @src: The folio to migrate from.
* @mode: How to migrate the folio.
*
* Like buffer_migrate_folio() except that this variant is more careful
* and checks that there are also no buffer head references. This function
* is the right one for mappings where buffer heads are directly looked
* up and referenced (such as block device mappings).
*
* Return: 0 on success or a negative errno on failure.
*/
int buffer_migrate_folio_norefs(struct address_space *mapping,
struct folio *dst, struct folio *src, enum migrate_mode mode)
{
return __buffer_migrate_folio(mapping, dst, src, mode, true);
}
EXPORT_SYMBOL_GPL(buffer_migrate_folio_norefs);
#endif /* CONFIG_BUFFER_HEAD */
int filemap_migrate_folio(struct address_space *mapping,
struct folio *dst, struct folio *src, enum migrate_mode mode)
{
return __migrate_folio(mapping, dst, src, folio_get_private(src), mode);
}
EXPORT_SYMBOL_GPL(filemap_migrate_folio);
/*
* Writeback a folio to clean the dirty state
*/
static int writeout(struct address_space *mapping, struct folio *folio)
{
struct writeback_control wbc = {
.sync_mode = WB_SYNC_NONE,
.nr_to_write = 1,
.range_start = 0,
.range_end = LLONG_MAX,
.for_reclaim = 1
};
int rc;
if (!mapping->a_ops->writepage)
/* No write method for the address space */
return -EINVAL;
if (!folio_clear_dirty_for_io(folio))
/* Someone else already triggered a write */
return -EAGAIN;
/*
* A dirty folio may imply that the underlying filesystem has
* the folio on some queue. So the folio must be clean for
* migration. Writeout may mean we lose the lock and the
* folio state is no longer what we checked for earlier.
* At this point we know that the migration attempt cannot
* be successful.
*/
remove_migration_ptes(folio, folio, false);
rc = mapping->a_ops->writepage(&folio->page, &wbc);
if (rc != AOP_WRITEPAGE_ACTIVATE)
/* unlocked. Relock */
folio_lock(folio);
return (rc < 0) ? -EIO : -EAGAIN;
}
/*
* Default handling if a filesystem does not provide a migration function.
*/
static int fallback_migrate_folio(struct address_space *mapping,
struct folio *dst, struct folio *src, enum migrate_mode mode)
{
if (folio_test_dirty(src)) {
/* Only writeback folios in full synchronous migration */
mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPY Introduce a new migration mode that allow to offload the copy to a device DMA engine. This changes the workflow of migration and not all address_space migratepage callback can support this. This is intended to be use by migrate_vma() which itself is use for thing like HMM (see include/linux/hmm.h). No additional per-filesystem migratepage testing is needed. I disables MIGRATE_SYNC_NO_COPY in all problematic migratepage() callback and i added comment in those to explain why (part of this patch). The commit message is unclear it should say that any callback that wish to support this new mode need to be aware of the difference in the migration flow from other mode. Some of these callbacks do extra locking while copying (aio, zsmalloc, balloon, ...) and for DMA to be effective you want to copy multiple pages in one DMA operations. But in the problematic case you can not easily hold the extra lock accross multiple call to this callback. Usual flow is: For each page { 1 - lock page 2 - call migratepage() callback 3 - (extra locking in some migratepage() callback) 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) 5 - copy page 6 - (unlock any extra lock of migratepage() callback) 7 - return from migratepage() callback 8 - unlock page } The new mode MIGRATE_SYNC_NO_COPY: 1 - lock multiple pages For each page { 2 - call migratepage() callback 3 - abort in all problematic migratepage() callback 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) } // finished all calls to migratepage() callback 5 - DMA copy multiple pages 6 - unlock all the pages To support MIGRATE_SYNC_NO_COPY in the problematic case we would need a new callback migratepages() (for instance) that deals with multiple pages in one transaction. Because the problematic cases are not important for current usage I did not wanted to complexify this patchset even more for no good reason. Link: http://lkml.kernel.org/r/20170817000548.32038-14-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:12:06 +00:00
switch (mode) {
case MIGRATE_SYNC:
break;
default:
return -EBUSY;
mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPY Introduce a new migration mode that allow to offload the copy to a device DMA engine. This changes the workflow of migration and not all address_space migratepage callback can support this. This is intended to be use by migrate_vma() which itself is use for thing like HMM (see include/linux/hmm.h). No additional per-filesystem migratepage testing is needed. I disables MIGRATE_SYNC_NO_COPY in all problematic migratepage() callback and i added comment in those to explain why (part of this patch). The commit message is unclear it should say that any callback that wish to support this new mode need to be aware of the difference in the migration flow from other mode. Some of these callbacks do extra locking while copying (aio, zsmalloc, balloon, ...) and for DMA to be effective you want to copy multiple pages in one DMA operations. But in the problematic case you can not easily hold the extra lock accross multiple call to this callback. Usual flow is: For each page { 1 - lock page 2 - call migratepage() callback 3 - (extra locking in some migratepage() callback) 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) 5 - copy page 6 - (unlock any extra lock of migratepage() callback) 7 - return from migratepage() callback 8 - unlock page } The new mode MIGRATE_SYNC_NO_COPY: 1 - lock multiple pages For each page { 2 - call migratepage() callback 3 - abort in all problematic migratepage() callback 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) } // finished all calls to migratepage() callback 5 - DMA copy multiple pages 6 - unlock all the pages To support MIGRATE_SYNC_NO_COPY in the problematic case we would need a new callback migratepages() (for instance) that deals with multiple pages in one transaction. Because the problematic cases are not important for current usage I did not wanted to complexify this patchset even more for no good reason. Link: http://lkml.kernel.org/r/20170817000548.32038-14-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:12:06 +00:00
}
return writeout(mapping, src);
}
/*
* Buffers may be managed in a filesystem specific way.
* We must have no buffers or drop them.
*/
mm: merge folio_has_private()/filemap_release_folio() call pairs Patch series "mm, netfs, fscache: Stop read optimisation when folio removed from pagecache", v7. This fixes an optimisation in fscache whereby we don't read from the cache for a particular file until we know that there's data there that we don't have in the pagecache. The problem is that I'm no longer using PG_fscache (aka PG_private_2) to indicate that the page is cached and so I don't get a notification when a cached page is dropped from the pagecache. The first patch merges some folio_has_private() and filemap_release_folio() pairs and introduces a helper, folio_needs_release(), to indicate if a release is required. The second patch is the actual fix. Following Willy's suggestions[1], it adds an AS_RELEASE_ALWAYS flag to an address_space that will make filemap_release_folio() always call ->release_folio(), even if PG_private/PG_private_2 aren't set. folio_needs_release() is altered to add a check for this. This patch (of 2): Make filemap_release_folio() check folio_has_private(). Then, in most cases, where a call to folio_has_private() is immediately followed by a call to filemap_release_folio(), we can get rid of the test in the pair. There are a couple of sites in mm/vscan.c that this can't so easily be done. In shrink_folio_list(), there are actually three cases (something different is done for incompletely invalidated buffers), but filemap_release_folio() elides two of them. In shrink_active_list(), we don't have have the folio lock yet, so the check allows us to avoid locking the page unnecessarily. A wrapper function to check if a folio needs release is provided for those places that still need to do it in the mm/ directory. This will acquire additional parts to the condition in a future patch. After this, the only remaining caller of folio_has_private() outside of mm/ is a check in fuse. Link: https://lkml.kernel.org/r/20230628104852.3391651-1-dhowells@redhat.com Link: https://lkml.kernel.org/r/20230628104852.3391651-2-dhowells@redhat.com Reported-by: Rohith Surabattula <rohiths.msft@gmail.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steve French <sfrench@samba.org> Cc: Shyam Prasad N <nspmangalore@gmail.com> Cc: Rohith Surabattula <rohiths.msft@gmail.com> Cc: Dave Wysochanski <dwysocha@redhat.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Xiubo Li <xiubli@redhat.com> Cc: Jingbo Xu <jefflexu@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-28 10:48:51 +00:00
if (!filemap_release_folio(src, GFP_KERNEL))
mm, migrate: immediately fail migration of a page with no migration handler Pages with no migration handler use a fallback handler which sometimes works and sometimes persistently retries. A historical example was blockdev pages but there are others such as odd refcounting when page->private is used. These are retried multiple times which is wasteful during compaction so this patch will fail migration faster unless the caller specifies MIGRATE_SYNC. This is not expected to help THP allocation success rates but it did reduce latencies very slightly in some cases. 1-socket thpfioscale 4.20.0 4.20.0 noreserved-v2r15 failfast-v2r15 Amean fault-both-1 0.00 ( 0.00%) 0.00 * 0.00%* Amean fault-both-3 3839.67 ( 0.00%) 3833.72 ( 0.15%) Amean fault-both-5 5177.47 ( 0.00%) 4967.15 ( 4.06%) Amean fault-both-7 7245.03 ( 0.00%) 7139.19 ( 1.46%) Amean fault-both-12 11534.89 ( 0.00%) 11326.30 ( 1.81%) Amean fault-both-18 16241.10 ( 0.00%) 16270.70 ( -0.18%) Amean fault-both-24 19075.91 ( 0.00%) 19839.65 ( -4.00%) Amean fault-both-30 22712.11 ( 0.00%) 21707.05 ( 4.43%) Amean fault-both-32 21692.92 ( 0.00%) 21968.16 ( -1.27%) The 2-socket results are not materially different. Scan rates are similar as expected. Link: http://lkml.kernel.org/r/20190118175136.31341-7-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 23:44:43 +00:00
return mode == MIGRATE_SYNC ? -EAGAIN : -EBUSY;
return migrate_folio(mapping, dst, src, mode);
}
/*
* Move a page to a newly allocated page
* The page is locked and all ptes have been successfully removed.
*
* The new page will have replaced the old page if this function
* is successful.
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 03:26:39 +00:00
*
* Return value:
* < 0 - error code
mm: adjust address_space_operations.migratepage() return code Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. This patch-set follows the main idea discussed at 2012 LSFMMS session: "Ballooning for transparent huge pages" -- http://lwn.net/Articles/490114/ to introduce the required changes to the virtio_balloon driver, as well as the changes to the core compaction & migration bits, in order to make those subsystems aware of ballooned pages and allow memory balloon pages become movable within a guest, thus avoiding the aforementioned fragmentation issue Following are numbers that prove this patch benefits on allowing compaction to be more effective at memory ballooned guests. Results for STRESS-HIGHALLOC benchmark, from Mel Gorman's mmtests suite, running on a 4gB RAM KVM guest which was ballooning 512mB RAM in 64mB chunks, at every minute (inflating/deflating), while test was running: ===BEGIN stress-highalloc STRESS-HIGHALLOC highalloc-3.7 highalloc-3.7 rc4-clean rc4-patch Pass 1 55.00 ( 0.00%) 62.00 ( 7.00%) Pass 2 54.00 ( 0.00%) 62.00 ( 8.00%) while Rested 75.00 ( 0.00%) 80.00 ( 5.00%) MMTests Statistics: duration 3.7 3.7 rc4-clean rc4-patch User 1207.59 1207.46 System 1300.55 1299.61 Elapsed 2273.72 2157.06 MMTests Statistics: vmstat 3.7 3.7 rc4-clean rc4-patch Page Ins 3581516 2374368 Page Outs 11148692 10410332 Swap Ins 80 47 Swap Outs 3641 476 Direct pages scanned 37978 33826 Kswapd pages scanned 1828245 1342869 Kswapd pages reclaimed 1710236 1304099 Direct pages reclaimed 32207 31005 Kswapd efficiency 93% 97% Kswapd velocity 804.077 622.546 Direct efficiency 84% 91% Direct velocity 16.703 15.682 Percentage direct scans 2% 2% Page writes by reclaim 79252 9704 Page writes file 75611 9228 Page writes anon 3641 476 Page reclaim immediate 16764 11014 Page rescued immediate 0 0 Slabs scanned 2171904 2152448 Direct inode steals 385 2261 Kswapd inode steals 659137 609670 Kswapd skipped wait 1 69 THP fault alloc 546 631 THP collapse alloc 361 339 THP splits 259 263 THP fault fallback 98 50 THP collapse fail 20 17 Compaction stalls 747 499 Compaction success 244 145 Compaction failures 503 354 Compaction pages moved 370888 474837 Compaction move failure 77378 65259 ===END stress-highalloc This patch: Introduce MIGRATEPAGE_SUCCESS as the default return code for address_space_operations.migratepage() method and documents the expected return code for the same method in failure cases. Signed-off-by: Rafael Aquini <aquini@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 00:02:31 +00:00
* MIGRATEPAGE_SUCCESS - success
*/
static int move_to_new_folio(struct folio *dst, struct folio *src,
enum migrate_mode mode)
{
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
int rc = -EAGAIN;
bool is_lru = !__folio_test_movable(src);
VM_BUG_ON_FOLIO(!folio_test_locked(src), src);
VM_BUG_ON_FOLIO(!folio_test_locked(dst), dst);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
if (likely(is_lru)) {
struct address_space *mapping = folio_mapping(src);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
if (!mapping)
rc = migrate_folio(mapping, dst, src, mode);
else if (mapping_inaccessible(mapping))
rc = -EOPNOTSUPP;
else if (mapping->a_ops->migrate_folio)
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
/*
* Most folios have a mapping and most filesystems
* provide a migrate_folio callback. Anonymous folios
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
* are part of swap space which also has its own
* migrate_folio callback. This is the most common path
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
* for page migration.
*/
rc = mapping->a_ops->migrate_folio(mapping, dst, src,
mode);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
else
rc = fallback_migrate_folio(mapping, dst, src, mode);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
} else {
const struct movable_operations *mops;
/*
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
* In case of non-lru page, it could be released after
* isolation step. In that case, we shouldn't try migration.
*/
VM_BUG_ON_FOLIO(!folio_test_isolated(src), src);
if (!folio_test_movable(src)) {
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
rc = MIGRATEPAGE_SUCCESS;
folio_clear_isolated(src);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
goto out;
}
mops = folio_movable_ops(src);
rc = mops->migrate_page(&dst->page, &src->page, mode);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
WARN_ON_ONCE(rc == MIGRATEPAGE_SUCCESS &&
!folio_test_isolated(src));
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
}
/*
* When successful, old pagecache src->mapping must be cleared before
* src is freed; but stats require that PageAnon be left as PageAnon.
*/
if (rc == MIGRATEPAGE_SUCCESS) {
if (__folio_test_movable(src)) {
VM_BUG_ON_FOLIO(!folio_test_isolated(src), src);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
/*
* We clear PG_movable under page_lock so any compactor
* cannot try to migrate this page.
*/
folio_clear_isolated(src);
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
}
/*
* Anonymous and movable src->mapping will be cleared by
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
* free_pages_prepare so don't reset it here for keeping
* the type to work PageAnon, for example.
*/
if (!folio_mapping_flags(src))
src->mapping = NULL;
mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate Our MIPS 1004Kc SoCs were seeing random userspace crashes with SIGILL and SIGSEGV that could not be traced back to a userspace code bug. They had all the magic signs of an I/D cache coherency issue. Now recently we noticed that the /proc/sys/vm/compact_memory interface was quite efficient at provoking this class of userspace crashes. Studying the code in mm/migrate.c there is a distinction made between migrating a page that is mapped at the instant of migration and one that is not mapped. Our problem turned out to be the non-mapped pages. For the non-mapped page the code performs a copy of the page content and all relevant meta-data of the page without doing the required D-cache maintenance. This leaves dirty data in the D-cache of the CPU and on the 1004K cores this data is not visible to the I-cache. A subsequent page-fault that triggers a mapping of the page will happily serve the process with potentially stale code. What about ARM then, this bug should have seen greater exposure? Well ARM became immune to this flaw back in 2010, see commit c01778001a4f ("ARM: 6379/1: Assume new page cache pages have dirty D-cache"). My proposed fix moves the D-cache maintenance inside move_to_new_page to make it common for both cases. Link: http://lkml.kernel.org/r/20190315083502.11849-1-larper@axis.com Fixes: 97ee0524614 ("flush cache before installing new page at migraton") Signed-off-by: Lars Persson <larper@axis.com> Reviewed-by: Paul Burton <paul.burton@mips.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29 03:44:28 +00:00
if (likely(!folio_is_zone_device(dst)))
flush_dcache_folio(dst);
}
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
out:
return rc;
}
/*
mm: migrate: fix getting incorrect page mapping during page migration When running stress-ng testing, we found below kernel crash after a few hours: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... After analyzing the vmcore, I found this issue is caused by page migration. The scenario is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. There are seveval ways to fix this issue: (1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving 'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target page has not built mappings yet. (2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing the system, however, there are still some PFN walkers that call page_mapping() without holding the page lock, such as compaction. (3) Using target page->private field to save the 'anon_vma' pointer and 2 bits page state, just as page->mapping records an anonymous page, which can remove the page_mapping() impact for PFN walkers and also seems a simple way. So I choose option 3 to fix this issue, and this can also fix other potential issues for PFN walkers, such as compaction. Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Xu Yu <xuyu@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-15 12:07:52 +00:00
* To record some information during migration, we use unused private
* field of struct folio of the newly allocated destination folio.
* This is safe because nobody is using it except us.
*/
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
enum {
PAGE_WAS_MAPPED = BIT(0),
PAGE_WAS_MLOCKED = BIT(1),
mm: migrate: fix getting incorrect page mapping during page migration When running stress-ng testing, we found below kernel crash after a few hours: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... After analyzing the vmcore, I found this issue is caused by page migration. The scenario is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. There are seveval ways to fix this issue: (1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving 'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target page has not built mappings yet. (2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing the system, however, there are still some PFN walkers that call page_mapping() without holding the page lock, such as compaction. (3) Using target page->private field to save the 'anon_vma' pointer and 2 bits page state, just as page->mapping records an anonymous page, which can remove the page_mapping() impact for PFN walkers and also seems a simple way. So I choose option 3 to fix this issue, and this can also fix other potential issues for PFN walkers, such as compaction. Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Xu Yu <xuyu@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-15 12:07:52 +00:00
PAGE_OLD_STATES = PAGE_WAS_MAPPED | PAGE_WAS_MLOCKED,
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
};
static void __migrate_folio_record(struct folio *dst,
mm: migrate: fix getting incorrect page mapping during page migration When running stress-ng testing, we found below kernel crash after a few hours: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... After analyzing the vmcore, I found this issue is caused by page migration. The scenario is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. There are seveval ways to fix this issue: (1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving 'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target page has not built mappings yet. (2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing the system, however, there are still some PFN walkers that call page_mapping() without holding the page lock, such as compaction. (3) Using target page->private field to save the 'anon_vma' pointer and 2 bits page state, just as page->mapping records an anonymous page, which can remove the page_mapping() impact for PFN walkers and also seems a simple way. So I choose option 3 to fix this issue, and this can also fix other potential issues for PFN walkers, such as compaction. Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Xu Yu <xuyu@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-15 12:07:52 +00:00
int old_page_state,
struct anon_vma *anon_vma)
{
mm: migrate: fix getting incorrect page mapping during page migration When running stress-ng testing, we found below kernel crash after a few hours: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... After analyzing the vmcore, I found this issue is caused by page migration. The scenario is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. There are seveval ways to fix this issue: (1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving 'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target page has not built mappings yet. (2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing the system, however, there are still some PFN walkers that call page_mapping() without holding the page lock, such as compaction. (3) Using target page->private field to save the 'anon_vma' pointer and 2 bits page state, just as page->mapping records an anonymous page, which can remove the page_mapping() impact for PFN walkers and also seems a simple way. So I choose option 3 to fix this issue, and this can also fix other potential issues for PFN walkers, such as compaction. Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Xu Yu <xuyu@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-15 12:07:52 +00:00
dst->private = (void *)anon_vma + old_page_state;
}
static void __migrate_folio_extract(struct folio *dst,
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
int *old_page_state,
struct anon_vma **anon_vmap)
{
mm: migrate: fix getting incorrect page mapping during page migration When running stress-ng testing, we found below kernel crash after a few hours: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... After analyzing the vmcore, I found this issue is caused by page migration. The scenario is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. There are seveval ways to fix this issue: (1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving 'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target page has not built mappings yet. (2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing the system, however, there are still some PFN walkers that call page_mapping() without holding the page lock, such as compaction. (3) Using target page->private field to save the 'anon_vma' pointer and 2 bits page state, just as page->mapping records an anonymous page, which can remove the page_mapping() impact for PFN walkers and also seems a simple way. So I choose option 3 to fix this issue, and this can also fix other potential issues for PFN walkers, such as compaction. Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Xu Yu <xuyu@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-15 12:07:52 +00:00
unsigned long private = (unsigned long)dst->private;
*anon_vmap = (struct anon_vma *)(private & ~PAGE_OLD_STATES);
*old_page_state = private & PAGE_OLD_STATES;
dst->private = NULL;
}
/* Restore the source folio to the original state upon failure */
static void migrate_folio_undo_src(struct folio *src,
int page_was_mapped,
struct anon_vma *anon_vma,
bool locked,
struct list_head *ret)
{
if (page_was_mapped)
remove_migration_ptes(src, src, false);
/* Drop an anon_vma reference if we took one */
if (anon_vma)
put_anon_vma(anon_vma);
if (locked)
folio_unlock(src);
if (ret)
list_move_tail(&src->lru, ret);
}
/* Restore the destination folio to the original state upon failure */
static void migrate_folio_undo_dst(struct folio *dst, bool locked,
free_folio_t put_new_folio, unsigned long private)
{
if (locked)
folio_unlock(dst);
if (put_new_folio)
put_new_folio(dst, private);
else
folio_put(dst);
}
/* Cleanup src folio upon migration success */
static void migrate_folio_done(struct folio *src,
enum migrate_reason reason)
{
/*
* Compaction can migrate also non-LRU pages which are
* not accounted to NR_ISOLATED_*. They can be recognized
* as __folio_test_movable
*/
if (likely(!__folio_test_movable(src)))
mod_node_page_state(folio_pgdat(src), NR_ISOLATED_ANON +
folio_is_file_lru(src), -folio_nr_pages(src));
if (reason != MR_MEMORY_FAILURE)
/* We release the page in page_handle_poison. */
folio_put(src);
}
/* Obtain the lock on page, remove all ptes. */
static int migrate_folio_unmap(new_folio_t get_new_folio,
free_folio_t put_new_folio, unsigned long private,
struct folio *src, struct folio **dstp, enum migrate_mode mode,
enum migrate_reason reason, struct list_head *ret)
{
struct folio *dst;
int rc = -EAGAIN;
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
int old_page_state = 0;
mm: migration: take a reference to the anon_vma before migrating This patchset is a memory compaction mechanism that reduces external fragmentation memory by moving GFP_MOVABLE pages to a fewer number of pageblocks. The term "compaction" was chosen as there are is a number of mechanisms that are not mutually exclusive that can be used to defragment memory. For example, lumpy reclaim is a form of defragmentation as was slub "defragmentation" (really a form of targeted reclaim). Hence, this is called "compaction" to distinguish it from other forms of defragmentation. In this implementation, a full compaction run involves two scanners operating within a zone - a migration and a free scanner. The migration scanner starts at the beginning of a zone and finds all movable pages within one pageblock_nr_pages-sized area and isolates them on a migratepages list. The free scanner begins at the end of the zone and searches on a per-area basis for enough free pages to migrate all the pages on the migratepages list. As each area is respectively migrated or exhausted of free pages, the scanners are advanced one area. A compaction run completes within a zone when the two scanners meet. This method is a bit primitive but is easy to understand and greater sophistication would require maintenance of counters on a per-pageblock basis. This would have a big impact on allocator fast-paths to improve compaction which is a poor trade-off. It also does not try relocate virtually contiguous pages to be physically contiguous. However, assuming transparent hugepages were in use, a hypothetical khugepaged might reuse compaction code to isolate free pages, split them and relocate userspace pages for promotion. Memory compaction can be triggered in one of three ways. It may be triggered explicitly by writing any value to /proc/sys/vm/compact_memory and compacting all of memory. It can be triggered on a per-node basis by writing any value to /sys/devices/system/node/nodeN/compact where N is the node ID to be compacted. When a process fails to allocate a high-order page, it may compact memory in an attempt to satisfy the allocation instead of entering direct reclaim. Explicit compaction does not finish until the two scanners meet and direct compaction ends if a suitable page becomes available that would meet watermarks. The series is in 14 patches. The first three are not "core" to the series but are important pre-requisites. Patch 1 reference counts anon_vma for rmap_walk_anon(). Without this patch, it's possible to use anon_vma after free if the caller is not holding a VMA or mmap_sem for the pages in question. While there should be no existing user that causes this problem, it's a requirement for memory compaction to be stable. The patch is at the start of the series for bisection reasons. Patch 2 merges the KSM and migrate counts. It could be merged with patch 1 but would be slightly harder to review. Patch 3 skips over unmapped anon pages during migration as there are no guarantees about the anon_vma existing. There is a window between when a page was isolated and migration started during which anon_vma could disappear. Patch 4 notes that PageSwapCache pages can still be migrated even if they are unmapped. Patch 5 allows CONFIG_MIGRATION to be set without CONFIG_NUMA Patch 6 exports a "unusable free space index" via debugfs. It's a measure of external fragmentation that takes the size of the allocation request into account. It can also be calculated from userspace so can be dropped if requested Patch 7 exports a "fragmentation index" which only has meaning when an allocation request fails. It determines if an allocation failure would be due to a lack of memory or external fragmentation. Patch 8 moves the definition for LRU isolation modes for use by compaction Patch 9 is the compaction mechanism although it's unreachable at this point Patch 10 adds a means of compacting all of memory with a proc trgger Patch 11 adds a means of compacting a specific node with a sysfs trigger Patch 12 adds "direct compaction" before "direct reclaim" if it is determined there is a good chance of success. Patch 13 adds a sysctl that allows tuning of the threshold at which the kernel will compact or direct reclaim Patch 14 temporarily disables compaction if an allocation failure occurs after compaction. Testing of compaction was in three stages. For the test, debugging, preempt, the sleep watchdog and lockdep were all enabled but nothing nasty popped out. min_free_kbytes was tuned as recommended by hugeadm to help fragmentation avoidance and high-order allocations. It was tested on X86, X86-64 and PPC64. Ths first test represents one of the easiest cases that can be faced for lumpy reclaim or memory compaction. 1. Machine freshly booted and configured for hugepage usage with a) hugeadm --create-global-mounts b) hugeadm --pool-pages-max DEFAULT:8G c) hugeadm --set-recommended-min_free_kbytes d) hugeadm --set-recommended-shmmax The min_free_kbytes here is important. Anti-fragmentation works best when pageblocks don't mix. hugeadm knows how to calculate a value that will significantly reduce the worst of external-fragmentation-related events as reported by the mm_page_alloc_extfrag tracepoint. 2. Load up memory a) Start updatedb b) Create in parallel a X files of pagesize*128 in size. Wait until files are created. By parallel, I mean that 4096 instances of dd were launched, one after the other using &. The crude objective being to mix filesystem metadata allocations with the buffer cache. c) Delete every second file so that pageblocks are likely to have holes d) kill updatedb if it's still running At this point, the system is quiet, memory is full but it's full with clean filesystem metadata and clean buffer cache that is unmapped. This is readily migrated or discarded so you'd expect lumpy reclaim to have no significant advantage over compaction but this is at the POC stage. 3. In increments, attempt to allocate 5% of memory as hugepages. Measure how long it took, how successful it was, how many direct reclaims took place and how how many compactions. Note the compaction figures might not fully add up as compactions can take place for orders other than the hugepage size X86 vanilla compaction Final page count 913 916 (attempted 1002) pages reclaimed 68296 9791 X86-64 vanilla compaction Final page count: 901 902 (attempted 1002) Total pages reclaimed: 112599 53234 PPC64 vanilla compaction Final page count: 93 94 (attempted 110) Total pages reclaimed: 103216 61838 There was not a dramatic improvement in success rates but it wouldn't be expected in this case either. What was important is that fewer pages were reclaimed in all cases reducing the amount of IO required to satisfy a huge page allocation. The second tests were all performance related - kernbench, netperf, iozone and sysbench. None showed anything too remarkable. The last test was a high-order allocation stress test. Many kernel compiles are started to fill memory with a pressured mix of unmovable and movable allocations. During this, an attempt is made to allocate 90% of memory as huge pages - one at a time with small delays between attempts to avoid flooding the IO queue. vanilla compaction Percentage of request allocated X86 98 99 Percentage of request allocated X86-64 95 98 Percentage of request allocated PPC64 55 70 This patch: rmap_walk_anon() does not use page_lock_anon_vma() for looking up and locking an anon_vma and it does not appear to have sufficient locking to ensure the anon_vma does not disappear from under it. This patch copies an approach used by KSM to take a reference on the anon_vma while pages are being migrated. This should prevent rmap_walk() running into nasty surprises later because anon_vma has been freed. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24 21:32:17 +00:00
struct anon_vma *anon_vma = NULL;
bool is_lru = !__folio_test_movable(src);
bool locked = false;
bool dst_locked = false;
if (folio_ref_count(src) == 1) {
/* Folio was freed from under us. So we are done. */
folio_clear_active(src);
folio_clear_unevictable(src);
/* free_pages_prepare() will clear PG_isolated. */
list_del(&src->lru);
migrate_folio_done(src, reason);
return MIGRATEPAGE_SUCCESS;
}
dst = get_new_folio(src, private);
if (!dst)
return -ENOMEM;
*dstp = dst;
dst->private = NULL;
if (!folio_trylock(src)) {
if (mode == MIGRATE_ASYNC)
goto out;
/*
* It's not safe for direct compaction to call lock_page.
* For example, during page readahead pages are added locked
* to the LRU. Later, when the IO completes the pages are
* marked uptodate and unlocked. However, the queueing
* could be merging multiple pages for one bio (e.g.
* mpage_readahead). If an allocation happens for the
* second or third page, the process can end up locking
* the same page twice and deadlocking. Rather than
* trying to be clever about what pages can be locked,
* avoid the use of lock_page for direct compaction
* altogether.
*/
if (current->flags & PF_MEMALLOC)
goto out;
migrate_pages: avoid blocking for IO in MIGRATE_SYNC_LIGHT The MIGRATE_SYNC_LIGHT mode is intended to block for things that will finish quickly but not for things that will take a long time. Exactly how long is too long is not well defined, but waits of tens of milliseconds is likely non-ideal. When putting a Chromebook under memory pressure (opening over 90 tabs on a 4GB machine) it was fairly easy to see delays waiting for some locks in the kcompactd code path of > 100 ms. While the laptop wasn't amazingly usable in this state, it was still limping along and this state isn't something artificial. Sometimes we simply end up with a lot of memory pressure. Putting the same Chromebook under memory pressure while it was running Android apps (though not stressing them) showed a much worse result (NOTE: this was on a older kernel but the codepaths here are similar). Android apps on ChromeOS currently run from a 128K-block, zlib-compressed, loopback-mounted squashfs disk. If we get a page fault from something backed by the squashfs filesystem we could end up holding a folio lock while reading enough from disk to decompress 128K (and then decompressing it using the somewhat slow zlib algorithms). That reading goes through the ext4 subsystem (because it's a loopback mount) before eventually ending up in the block subsystem. This extra jaunt adds extra overhead. Without much work I could see cases where we ended up blocked on a folio lock for over a second. With more extreme memory pressure I could see up to 25 seconds. We considered adding a timeout in the case of MIGRATE_SYNC_LIGHT for the two locks that were seen to be slow [1] and that generated much discussion. After discussion, it was decided that we should avoid waiting for the two locks during MIGRATE_SYNC_LIGHT if they were being held for IO. We'll continue with the unbounded wait for the more full SYNC modes. With this change, I couldn't see any slow waits on these locks with my previous testcases. NOTE: The reason I stated digging into this originally isn't because some benchmark had gone awry, but because we've received in-the-field crash reports where we have a hung task waiting on the page lock (which is the equivalent code path on old kernels). While the root cause of those crashes is likely unrelated and won't be fixed by this patch, analyzing those crash reports did point out these very long waits seemed like something good to fix. With this patch we should no longer hang waiting on these locks, but presumably the system will still be in a bad shape and hang somewhere else. [1] https://lore.kernel.org/r/20230421151135.v2.1.I2b71e11264c5c214bc59744b9e13e4c353bc5714@changeid Link: https://lkml.kernel.org/r/20230428135414.v3.1.Ia86ccac02a303154a0b8bc60567e7a95d34c96d3@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Hillf Danton <hdanton@sina.com> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-28 20:54:38 +00:00
/*
* In "light" mode, we can wait for transient locks (eg
* inserting a page into the page table), but it's not
* worth waiting for I/O.
*/
if (mode == MIGRATE_SYNC_LIGHT && !folio_test_uptodate(src))
goto out;
folio_lock(src);
}
locked = true;
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
if (folio_test_mlocked(src))
old_page_state |= PAGE_WAS_MLOCKED;
if (folio_test_writeback(src)) {
/*
* Only in the case of a full synchronous migration is it
* necessary to wait for PageWriteback. In the async case,
* the retry loop is too short and in the sync-light case,
* the overhead of stalling is too much
*/
mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPY Introduce a new migration mode that allow to offload the copy to a device DMA engine. This changes the workflow of migration and not all address_space migratepage callback can support this. This is intended to be use by migrate_vma() which itself is use for thing like HMM (see include/linux/hmm.h). No additional per-filesystem migratepage testing is needed. I disables MIGRATE_SYNC_NO_COPY in all problematic migratepage() callback and i added comment in those to explain why (part of this patch). The commit message is unclear it should say that any callback that wish to support this new mode need to be aware of the difference in the migration flow from other mode. Some of these callbacks do extra locking while copying (aio, zsmalloc, balloon, ...) and for DMA to be effective you want to copy multiple pages in one DMA operations. But in the problematic case you can not easily hold the extra lock accross multiple call to this callback. Usual flow is: For each page { 1 - lock page 2 - call migratepage() callback 3 - (extra locking in some migratepage() callback) 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) 5 - copy page 6 - (unlock any extra lock of migratepage() callback) 7 - return from migratepage() callback 8 - unlock page } The new mode MIGRATE_SYNC_NO_COPY: 1 - lock multiple pages For each page { 2 - call migratepage() callback 3 - abort in all problematic migratepage() callback 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) } // finished all calls to migratepage() callback 5 - DMA copy multiple pages 6 - unlock all the pages To support MIGRATE_SYNC_NO_COPY in the problematic case we would need a new callback migratepages() (for instance) that deals with multiple pages in one transaction. Because the problematic cases are not important for current usage I did not wanted to complexify this patchset even more for no good reason. Link: http://lkml.kernel.org/r/20170817000548.32038-14-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:12:06 +00:00
switch (mode) {
case MIGRATE_SYNC:
break;
default:
rc = -EBUSY;
goto out;
}
folio_wait_writeback(src);
}
/*
* By try_to_migrate(), src->mapcount goes down to 0 here. In this case,
* we cannot notice that anon_vma is freed while we migrate a page.
* This get_anon_vma() delays freeing anon_vma pointer until the end
* of migration. File cache pages are no problem because of page_lock()
* File Caches may use write_page() or lock_page() in migration, then,
* just care Anon page here.
*
* Only folio_get_anon_vma() understands the subtleties of
* getting a hold on an anon_vma from outside one of its mms.
* But if we cannot get anon_vma, then we won't need it anyway,
* because that implies that the anon page is no longer mapped
* (and cannot be remapped so long as we hold the page lock).
*/
if (folio_test_anon(src) && !folio_test_ksm(src))
anon_vma = folio_get_anon_vma(src);
/*
* Block others from accessing the new page when we get around to
* establishing additional references. We are usually the only one
* holding a reference to dst at this point. We used to have a BUG
* here if folio_trylock(dst) fails, but would like to allow for
* cases where there might be a race with the previous use of dst.
* This is much like races on refcount of oldpage: just don't BUG().
*/
if (unlikely(!folio_trylock(dst)))
goto out;
dst_locked = true;
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
if (unlikely(!is_lru)) {
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
__migrate_folio_record(dst, old_page_state, anon_vma);
return MIGRATEPAGE_UNMAP;
mm: migrate: support non-lru movable page migration We have allowed migration for only LRU pages until now and it was enough to make high-order pages. But recently, embedded system(e.g., webOS, android) uses lots of non-movable pages(e.g., zram, GPU memory) so we have seen several reports about troubles of small high-order allocation. For fixing the problem, there were several efforts (e,g,. enhance compaction algorithm, SLUB fallback to 0-order page, reserved memory, vmalloc and so on) but if there are lots of non-movable pages in system, their solutions are void in the long run. So, this patch is to support facility to change non-movable pages with movable. For the feature, this patch introduces functions related to migration to address_space_operations as well as some page flags. If a driver want to make own pages movable, it should define three functions which are function pointers of struct address_space_operations. 1. bool (*isolate_page) (struct page *page, isolate_mode_t mode); What VM expects on isolate_page function of driver is to return *true* if driver isolates page successfully. On returing true, VM marks the page as PG_isolated so concurrent isolation in several CPUs skip the page for isolation. If a driver cannot isolate the page, it should return *false*. Once page is successfully isolated, VM uses page.lru fields so driver shouldn't expect to preserve values in that fields. 2. int (*migratepage) (struct address_space *mapping, struct page *newpage, struct page *oldpage, enum migrate_mode); After isolation, VM calls migratepage of driver with isolated page. The function of migratepage is to move content of the old page to new page and set up fields of struct page newpage. Keep in mind that you should indicate to the VM the oldpage is no longer movable via __ClearPageMovable() under page_lock if you migrated the oldpage successfully and returns 0. If driver cannot migrate the page at the moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page migration in a short time because VM interprets -EAGAIN as "temporal migration failure". On returning any error except -EAGAIN, VM will give up the page migration without retrying in this time. Driver shouldn't touch page.lru field VM using in the functions. 3. void (*putback_page)(struct page *); If migration fails on isolated page, VM should return the isolated page to the driver so VM calls driver's putback_page with migration failed page. In this function, driver should put the isolated page back to the own data structure. 4. non-lru movable page flags There are two page flags for supporting non-lru movable page. * PG_movable Driver should use the below function to make page movable under page_lock. void __SetPageMovable(struct page *page, struct address_space *mapping) It needs argument of address_space for registering migration family functions which will be called by VM. Exactly speaking, PG_movable is not a real flag of struct page. Rather than, VM reuses page->mapping's lower bits to represent it. #define PAGE_MAPPING_MOVABLE 0x2 page->mapping = page->mapping | PAGE_MAPPING_MOVABLE; so driver shouldn't access page->mapping directly. Instead, driver should use page_mapping which mask off the low two bits of page->mapping so it can get right struct address_space. For testing of non-lru movable page, VM supports __PageMovable function. However, it doesn't guarantee to identify non-lru movable page because page->mapping field is unified with other variables in struct page. As well, if driver releases the page after isolation by VM, page->mapping doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at __ClearPageMovable). But __PageMovable is cheap to catch whether page is LRU or non-lru movable once the page has been isolated. Because LRU pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also good for just peeking to test non-lru movable pages before more expensive checking with lock_page in pfn scanning to select victim. For guaranteeing non-lru movable page, VM provides PageMovable function. Unlike __PageMovable, PageMovable functions validates page->mapping and mapping->a_ops->isolate_page under lock_page. The lock_page prevents sudden destroying of page->mapping. Driver using __SetPageMovable should clear the flag via __ClearMovablePage under page_lock before the releasing the page. * PG_isolated To prevent concurrent isolation among several CPUs, VM marks isolated page as PG_isolated under lock_page. So if a CPU encounters PG_isolated non-lru movable page, it can skip it. Driver doesn't need to manipulate the flag because VM will set/clear it automatically. Keep in mind that if driver sees PG_isolated page, it means the page have been isolated by VM so it shouldn't touch page.lru field. PG_isolated is alias with PG_reclaim flag so driver shouldn't use the flag for own purpose. [opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru] Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: John Einar Reitan <john.reitan@foss.arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:05 +00:00
}
/*
* Corner case handling:
* 1. When a new swap-cache page is read into, it is added to the LRU
* and treated as swapcache but it has no rmap yet.
* Calling try_to_unmap() against a src->mapping==NULL page will
* trigger a BUG. So handle it here.
* 2. An orphaned page (see truncate_cleanup_page) might have
* fs-private metadata. The page can be picked up due to memory
* offlining. Everywhere else except page reclaim, the page is
* invisible to the vm, so the page can not be migrated. So try to
* free the metadata, so the page can be freed.
*/
if (!src->mapping) {
if (folio_test_private(src)) {
try_to_free_buffers(src);
goto out;
}
} else if (folio_mapped(src)) {
/* Establish migration ptes */
VM_BUG_ON_FOLIO(folio_test_anon(src) &&
!folio_test_ksm(src) && !anon_vma, src);
migrate_pages: fix deadlock in batched migration Patch series "migrate_pages: fix deadlock in batched synchronous migration", v2. Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei. Analysis shows that if we have locked some other folios except the one we are migrating, it's not safe in general to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. So 1/3 fixes the deadlock in a simple way, where the batching support for the synchronous migration is disabled. The change is straightforward and easy to be understood. While 3/3 re-introduce the batching for synchronous migration via trying to migrate asynchronously in batch optimistically, then fall back to migrate synchronously one by one for fail-to-migrate folios. Test shows that this can restore the TLB flushing batching performance for synchronous migration effectively. This patch (of 3): Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei! For example, in the following deadlock trace snippet, INFO: task kworker/u4:0:9 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000 Workqueue: loop4 loop_rootcg_workfn Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? __pfx_wake_page_function+0x10/0x10 __filemap_get_folio+0x73d/0x770 shmem_get_folio_gfp+0x1fd/0xc80 shmem_write_begin+0x91/0x220 generic_perform_write+0x10e/0x2e0 __generic_file_write_iter+0x17e/0x290 ? generic_write_checks+0x12b/0x1a0 generic_file_write_iter+0x97/0x180 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_readv_writev+0x13c/0x210 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_write+0xf6/0x330 vfs_iter_write+0x46/0x70 loop_process_work+0x723/0xfe0 loop_rootcg_workfn+0x28/0x40 process_one_work+0x3cc/0x8d0 worker_thread+0x66/0x630 ? __pfx_worker_thread+0x10/0x10 kthread+0x153/0x190 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> INFO: task repro:1023 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004 Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? compaction_alloc+0x77/0x1150 ? __pfx_wake_page_function+0x10/0x10 folio_wait_bit+0x30/0x40 folio_wait_writeback+0x2e/0x1e0 migrate_pages_batch+0x555/0x1ac0 ? __pfx_compaction_alloc+0x10/0x10 ? __pfx_compaction_free+0x10/0x10 ? __this_cpu_preempt_check+0x17/0x20 ? lock_is_held_type+0xe6/0x140 migrate_pages+0x100e/0x1180 ? __pfx_compaction_free+0x10/0x10 ? __pfx_compaction_alloc+0x10/0x10 compact_zone+0xe10/0x1b50 ? lock_is_held_type+0xe6/0x140 ? check_preemption_disabled+0x80/0xf0 compact_node+0xa3/0x100 ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 ? _find_first_bit+0x7b/0x90 sysctl_compaction_handler+0x5d/0xb0 proc_sys_call_handler+0x29d/0x420 proc_sys_write+0x2b/0x40 vfs_write+0x3a3/0x780 ksys_write+0xb7/0x180 __x64_sys_write+0x26/0x30 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f3a2471f59d RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0 R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000 </TASK> The page migration task has held the lock of the shmem folio A, and is waiting the writeback of the folio B of the file system on the loop block device to complete. While the loop worker task which writes back the folio B is waiting to lock the shmem folio A, because the folio A backs the folio B in the loop device. Thus deadlock is triggered. In general, if we have locked some other folios except the one we are migrating, it's not safe to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. To fix the deadlock, in this patch, we avoid to batch the page migration except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting is avoided. The fix can be improved further. We will do that as soon as possible. Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/ Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/ Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/ Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Stefan Roesch <shr@devkernel.io> Cc: Tejun Heo <tj@kernel.org> Cc: Xin Hao <xhao@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 03:01:53 +00:00
try_to_migrate(src, mode == MIGRATE_ASYNC ? TTU_BATCH_FLUSH : 0);
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
old_page_state |= PAGE_WAS_MAPPED;
mm: unmapped page migration avoid unmap+remap overhead Page migration's __unmap_and_move(), and rmap's try_to_unmap(), were created for use on pages almost certainly mapped into userspace. But nowadays compaction often applies them to unmapped page cache pages: which may exacerbate contention on i_mmap_rwsem quite unnecessarily, since try_to_unmap_file() makes no preliminary page_mapped() check. Now check page_mapped() in __unmap_and_move(); and avoid repeating the same overhead in rmap_walk_file() - don't remove_migration_ptes() when we never inserted any. (The PageAnon(page) comment blocks now look even sillier than before, but clean that up on some other occasion. And note in passing that try_to_unmap_one() does not use a migration entry when PageSwapCache, so remove_migration_ptes() will then not update that swap entry to newpage pte: not a big deal, but something else to clean up later.) Davidlohr remarked in "mm,fs: introduce helpers around the i_mmap_mutex" conversion to i_mmap_rwsem, that "The biggest winner of these changes is migration": a part of the reason might be all of that unnecessary taking of i_mmap_mutex in page migration; and it's rather a shame that I didn't get around to sending this patch in before his - this one is much less useful after Davidlohr's conversion to rwsem, but still good. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:19 +00:00
}
if (!folio_mapped(src)) {
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
__migrate_folio_record(dst, old_page_state, anon_vma);
return MIGRATEPAGE_UNMAP;
}
out:
/*
* A folio that has not been unmapped will be restored to
* right list unless we want to retry.
*/
migrate_pages: fix deadlock in batched migration Patch series "migrate_pages: fix deadlock in batched synchronous migration", v2. Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei. Analysis shows that if we have locked some other folios except the one we are migrating, it's not safe in general to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. So 1/3 fixes the deadlock in a simple way, where the batching support for the synchronous migration is disabled. The change is straightforward and easy to be understood. While 3/3 re-introduce the batching for synchronous migration via trying to migrate asynchronously in batch optimistically, then fall back to migrate synchronously one by one for fail-to-migrate folios. Test shows that this can restore the TLB flushing batching performance for synchronous migration effectively. This patch (of 3): Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei! For example, in the following deadlock trace snippet, INFO: task kworker/u4:0:9 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000 Workqueue: loop4 loop_rootcg_workfn Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? __pfx_wake_page_function+0x10/0x10 __filemap_get_folio+0x73d/0x770 shmem_get_folio_gfp+0x1fd/0xc80 shmem_write_begin+0x91/0x220 generic_perform_write+0x10e/0x2e0 __generic_file_write_iter+0x17e/0x290 ? generic_write_checks+0x12b/0x1a0 generic_file_write_iter+0x97/0x180 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_readv_writev+0x13c/0x210 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_write+0xf6/0x330 vfs_iter_write+0x46/0x70 loop_process_work+0x723/0xfe0 loop_rootcg_workfn+0x28/0x40 process_one_work+0x3cc/0x8d0 worker_thread+0x66/0x630 ? __pfx_worker_thread+0x10/0x10 kthread+0x153/0x190 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> INFO: task repro:1023 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004 Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? compaction_alloc+0x77/0x1150 ? __pfx_wake_page_function+0x10/0x10 folio_wait_bit+0x30/0x40 folio_wait_writeback+0x2e/0x1e0 migrate_pages_batch+0x555/0x1ac0 ? __pfx_compaction_alloc+0x10/0x10 ? __pfx_compaction_free+0x10/0x10 ? __this_cpu_preempt_check+0x17/0x20 ? lock_is_held_type+0xe6/0x140 migrate_pages+0x100e/0x1180 ? __pfx_compaction_free+0x10/0x10 ? __pfx_compaction_alloc+0x10/0x10 compact_zone+0xe10/0x1b50 ? lock_is_held_type+0xe6/0x140 ? check_preemption_disabled+0x80/0xf0 compact_node+0xa3/0x100 ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 ? _find_first_bit+0x7b/0x90 sysctl_compaction_handler+0x5d/0xb0 proc_sys_call_handler+0x29d/0x420 proc_sys_write+0x2b/0x40 vfs_write+0x3a3/0x780 ksys_write+0xb7/0x180 __x64_sys_write+0x26/0x30 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f3a2471f59d RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0 R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000 </TASK> The page migration task has held the lock of the shmem folio A, and is waiting the writeback of the folio B of the file system on the loop block device to complete. While the loop worker task which writes back the folio B is waiting to lock the shmem folio A, because the folio A backs the folio B in the loop device. Thus deadlock is triggered. In general, if we have locked some other folios except the one we are migrating, it's not safe to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. To fix the deadlock, in this patch, we avoid to batch the page migration except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting is avoided. The fix can be improved further. We will do that as soon as possible. Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/ Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/ Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/ Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Stefan Roesch <shr@devkernel.io> Cc: Tejun Heo <tj@kernel.org> Cc: Xin Hao <xhao@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 03:01:53 +00:00
if (rc == -EAGAIN)
ret = NULL;
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
migrate_folio_undo_src(src, old_page_state & PAGE_WAS_MAPPED,
anon_vma, locked, ret);
migrate_folio_undo_dst(dst, dst_locked, put_new_folio, private);
return rc;
}
/* Migrate the folio to the newly allocated folio in dst. */
static int migrate_folio_move(free_folio_t put_new_folio, unsigned long private,
struct folio *src, struct folio *dst,
enum migrate_mode mode, enum migrate_reason reason,
struct list_head *ret)
{
int rc;
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
int old_page_state = 0;
struct anon_vma *anon_vma = NULL;
bool is_lru = !__folio_test_movable(src);
struct list_head *prev;
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
__migrate_folio_extract(dst, &old_page_state, &anon_vma);
prev = dst->lru.prev;
list_del(&dst->lru);
rc = move_to_new_folio(dst, src, mode);
if (rc)
goto out;
if (unlikely(!is_lru))
goto out_unlock_both;
/*
* When successful, push dst to LRU immediately: so that if it
* turns out to be an mlocked page, remove_migration_ptes() will
* automatically build up the correct dst->mlock_count for it.
*
* We would like to do something similar for the old page, when
* unsuccessful, and other cases when a page has been temporarily
* isolated from the unevictable LRU: but this case is the easiest.
*/
folio_add_lru(dst);
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
if (old_page_state & PAGE_WAS_MLOCKED)
lru_add_drain();
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
if (old_page_state & PAGE_WAS_MAPPED)
remove_migration_ptes(src, dst, false);
mm: migration: take a reference to the anon_vma before migrating This patchset is a memory compaction mechanism that reduces external fragmentation memory by moving GFP_MOVABLE pages to a fewer number of pageblocks. The term "compaction" was chosen as there are is a number of mechanisms that are not mutually exclusive that can be used to defragment memory. For example, lumpy reclaim is a form of defragmentation as was slub "defragmentation" (really a form of targeted reclaim). Hence, this is called "compaction" to distinguish it from other forms of defragmentation. In this implementation, a full compaction run involves two scanners operating within a zone - a migration and a free scanner. The migration scanner starts at the beginning of a zone and finds all movable pages within one pageblock_nr_pages-sized area and isolates them on a migratepages list. The free scanner begins at the end of the zone and searches on a per-area basis for enough free pages to migrate all the pages on the migratepages list. As each area is respectively migrated or exhausted of free pages, the scanners are advanced one area. A compaction run completes within a zone when the two scanners meet. This method is a bit primitive but is easy to understand and greater sophistication would require maintenance of counters on a per-pageblock basis. This would have a big impact on allocator fast-paths to improve compaction which is a poor trade-off. It also does not try relocate virtually contiguous pages to be physically contiguous. However, assuming transparent hugepages were in use, a hypothetical khugepaged might reuse compaction code to isolate free pages, split them and relocate userspace pages for promotion. Memory compaction can be triggered in one of three ways. It may be triggered explicitly by writing any value to /proc/sys/vm/compact_memory and compacting all of memory. It can be triggered on a per-node basis by writing any value to /sys/devices/system/node/nodeN/compact where N is the node ID to be compacted. When a process fails to allocate a high-order page, it may compact memory in an attempt to satisfy the allocation instead of entering direct reclaim. Explicit compaction does not finish until the two scanners meet and direct compaction ends if a suitable page becomes available that would meet watermarks. The series is in 14 patches. The first three are not "core" to the series but are important pre-requisites. Patch 1 reference counts anon_vma for rmap_walk_anon(). Without this patch, it's possible to use anon_vma after free if the caller is not holding a VMA or mmap_sem for the pages in question. While there should be no existing user that causes this problem, it's a requirement for memory compaction to be stable. The patch is at the start of the series for bisection reasons. Patch 2 merges the KSM and migrate counts. It could be merged with patch 1 but would be slightly harder to review. Patch 3 skips over unmapped anon pages during migration as there are no guarantees about the anon_vma existing. There is a window between when a page was isolated and migration started during which anon_vma could disappear. Patch 4 notes that PageSwapCache pages can still be migrated even if they are unmapped. Patch 5 allows CONFIG_MIGRATION to be set without CONFIG_NUMA Patch 6 exports a "unusable free space index" via debugfs. It's a measure of external fragmentation that takes the size of the allocation request into account. It can also be calculated from userspace so can be dropped if requested Patch 7 exports a "fragmentation index" which only has meaning when an allocation request fails. It determines if an allocation failure would be due to a lack of memory or external fragmentation. Patch 8 moves the definition for LRU isolation modes for use by compaction Patch 9 is the compaction mechanism although it's unreachable at this point Patch 10 adds a means of compacting all of memory with a proc trgger Patch 11 adds a means of compacting a specific node with a sysfs trigger Patch 12 adds "direct compaction" before "direct reclaim" if it is determined there is a good chance of success. Patch 13 adds a sysctl that allows tuning of the threshold at which the kernel will compact or direct reclaim Patch 14 temporarily disables compaction if an allocation failure occurs after compaction. Testing of compaction was in three stages. For the test, debugging, preempt, the sleep watchdog and lockdep were all enabled but nothing nasty popped out. min_free_kbytes was tuned as recommended by hugeadm to help fragmentation avoidance and high-order allocations. It was tested on X86, X86-64 and PPC64. Ths first test represents one of the easiest cases that can be faced for lumpy reclaim or memory compaction. 1. Machine freshly booted and configured for hugepage usage with a) hugeadm --create-global-mounts b) hugeadm --pool-pages-max DEFAULT:8G c) hugeadm --set-recommended-min_free_kbytes d) hugeadm --set-recommended-shmmax The min_free_kbytes here is important. Anti-fragmentation works best when pageblocks don't mix. hugeadm knows how to calculate a value that will significantly reduce the worst of external-fragmentation-related events as reported by the mm_page_alloc_extfrag tracepoint. 2. Load up memory a) Start updatedb b) Create in parallel a X files of pagesize*128 in size. Wait until files are created. By parallel, I mean that 4096 instances of dd were launched, one after the other using &. The crude objective being to mix filesystem metadata allocations with the buffer cache. c) Delete every second file so that pageblocks are likely to have holes d) kill updatedb if it's still running At this point, the system is quiet, memory is full but it's full with clean filesystem metadata and clean buffer cache that is unmapped. This is readily migrated or discarded so you'd expect lumpy reclaim to have no significant advantage over compaction but this is at the POC stage. 3. In increments, attempt to allocate 5% of memory as hugepages. Measure how long it took, how successful it was, how many direct reclaims took place and how how many compactions. Note the compaction figures might not fully add up as compactions can take place for orders other than the hugepage size X86 vanilla compaction Final page count 913 916 (attempted 1002) pages reclaimed 68296 9791 X86-64 vanilla compaction Final page count: 901 902 (attempted 1002) Total pages reclaimed: 112599 53234 PPC64 vanilla compaction Final page count: 93 94 (attempted 110) Total pages reclaimed: 103216 61838 There was not a dramatic improvement in success rates but it wouldn't be expected in this case either. What was important is that fewer pages were reclaimed in all cases reducing the amount of IO required to satisfy a huge page allocation. The second tests were all performance related - kernbench, netperf, iozone and sysbench. None showed anything too remarkable. The last test was a high-order allocation stress test. Many kernel compiles are started to fill memory with a pressured mix of unmovable and movable allocations. During this, an attempt is made to allocate 90% of memory as huge pages - one at a time with small delays between attempts to avoid flooding the IO queue. vanilla compaction Percentage of request allocated X86 98 99 Percentage of request allocated X86-64 95 98 Percentage of request allocated PPC64 55 70 This patch: rmap_walk_anon() does not use page_lock_anon_vma() for looking up and locking an anon_vma and it does not appear to have sufficient locking to ensure the anon_vma does not disappear from under it. This patch copies an approach used by KSM to take a reference on the anon_vma while pages are being migrated. This should prevent rmap_walk() running into nasty surprises later because anon_vma has been freed. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24 21:32:17 +00:00
out_unlock_both:
folio_unlock(dst);
set_page_owner_migrate_reason(&dst->page, reason);
mm: use put_page() to free page instead of putback_lru_page() Recently, I got many reports about perfermance degradation in embedded system(Android mobile phone, webOS TV and so on) and easy fork fail. The problem was fragmentation caused by zram and GPU driver mainly. With memory pressure, their pages were spread out all of pageblock and it cannot be migrated with current compaction algorithm which supports only LRU pages. In the end, compaction cannot work well so reclaimer shrinks all of working set pages. It made system very slow and even to fail to fork easily which requires order-[2 or 3] allocations. Other pain point is that they cannot use CMA memory space so when OOM kill happens, I can see many free pages in CMA area, which is not memory efficient. In our product which has big CMA memory, it reclaims zones too exccessively to allocate GPU and zram page although there are lots of free space in CMA so system becomes very slow easily. To solve these problem, this patch tries to add facility to migrate non-lru pages via introducing new functions and page flags to help migration. struct address_space_operations { .. .. bool (*isolate_page)(struct page *, isolate_mode_t); void (*putback_page)(struct page *); .. } new page flags PG_movable PG_isolated For details, please read description in "mm: migrate: support non-lru movable page migration". Originally, Gioh Kim had tried to support this feature but he moved so I took over the work. I took many code from his work and changed a little bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to have many credit, too. And I should mention Chulmin who have tested this patchset heavily so I can find many bugs from him. :) Thanks, Gioh, Konstantin and Chulmin! This patchset consists of five parts. 1. clean up migration mm: use put_page to free page instead of putback_lru_page 2. add non-lru page migration feature mm: migrate: support non-lru movable page migration 3. rework KVM memory-ballooning mm: balloon: use general non-lru movable page feature 4. zsmalloc refactoring for preparing page migration zsmalloc: keep max_object in size_class zsmalloc: use bit_spin_lock zsmalloc: use accessor zsmalloc: factor page chain functionality out zsmalloc: introduce zspage structure zsmalloc: separate free_zspage from putback_zspage zsmalloc: use freeobj for index 5. zsmalloc page migration zsmalloc: page migration support zram: use __GFP_MOVABLE for memory allocation This patch (of 12): Procedure of page migration is as follows: First of all, it should isolate a page from LRU and try to migrate the page. If it is successful, it releases the page for freeing. Otherwise, it should put the page back to LRU list. For LRU pages, we have used putback_lru_page for both freeing and putback to LRU list. It's okay because put_page is aware of LRU list so if it releases last refcount of the page, it removes the page from LRU list. However, It makes unnecessary operations (e.g., lru_cache_add, pagevec and flags operations. It would be not significant but no worth to do) and harder to support new non-lru page migration because put_page isn't aware of non-lru page's data structure. To solve the problem, we can add new hook in put_page with PageMovable flags check but it can increase overhead in hot path and needs new locking scheme to stabilize the flag check with put_page. So, this patch cleans it up to divide two semantic(ie, put and putback). If migration is successful, use put_page instead of putback_lru_page and use putback_lru_page only on failure. That makes code more readable and doesn't add overhead in put_page. Comment from Vlastimil "Yeah, and compaction (perhaps also other migration users) has to drain the lru pvec... Getting rid of this stuff is worth even by itself." Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:02 +00:00
/*
* If migration is successful, decrease refcount of dst,
mm: use put_page() to free page instead of putback_lru_page() Recently, I got many reports about perfermance degradation in embedded system(Android mobile phone, webOS TV and so on) and easy fork fail. The problem was fragmentation caused by zram and GPU driver mainly. With memory pressure, their pages were spread out all of pageblock and it cannot be migrated with current compaction algorithm which supports only LRU pages. In the end, compaction cannot work well so reclaimer shrinks all of working set pages. It made system very slow and even to fail to fork easily which requires order-[2 or 3] allocations. Other pain point is that they cannot use CMA memory space so when OOM kill happens, I can see many free pages in CMA area, which is not memory efficient. In our product which has big CMA memory, it reclaims zones too exccessively to allocate GPU and zram page although there are lots of free space in CMA so system becomes very slow easily. To solve these problem, this patch tries to add facility to migrate non-lru pages via introducing new functions and page flags to help migration. struct address_space_operations { .. .. bool (*isolate_page)(struct page *, isolate_mode_t); void (*putback_page)(struct page *); .. } new page flags PG_movable PG_isolated For details, please read description in "mm: migrate: support non-lru movable page migration". Originally, Gioh Kim had tried to support this feature but he moved so I took over the work. I took many code from his work and changed a little bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to have many credit, too. And I should mention Chulmin who have tested this patchset heavily so I can find many bugs from him. :) Thanks, Gioh, Konstantin and Chulmin! This patchset consists of five parts. 1. clean up migration mm: use put_page to free page instead of putback_lru_page 2. add non-lru page migration feature mm: migrate: support non-lru movable page migration 3. rework KVM memory-ballooning mm: balloon: use general non-lru movable page feature 4. zsmalloc refactoring for preparing page migration zsmalloc: keep max_object in size_class zsmalloc: use bit_spin_lock zsmalloc: use accessor zsmalloc: factor page chain functionality out zsmalloc: introduce zspage structure zsmalloc: separate free_zspage from putback_zspage zsmalloc: use freeobj for index 5. zsmalloc page migration zsmalloc: page migration support zram: use __GFP_MOVABLE for memory allocation This patch (of 12): Procedure of page migration is as follows: First of all, it should isolate a page from LRU and try to migrate the page. If it is successful, it releases the page for freeing. Otherwise, it should put the page back to LRU list. For LRU pages, we have used putback_lru_page for both freeing and putback to LRU list. It's okay because put_page is aware of LRU list so if it releases last refcount of the page, it removes the page from LRU list. However, It makes unnecessary operations (e.g., lru_cache_add, pagevec and flags operations. It would be not significant but no worth to do) and harder to support new non-lru page migration because put_page isn't aware of non-lru page's data structure. To solve the problem, we can add new hook in put_page with PageMovable flags check but it can increase overhead in hot path and needs new locking scheme to stabilize the flag check with put_page. So, this patch cleans it up to divide two semantic(ie, put and putback). If migration is successful, use put_page instead of putback_lru_page and use putback_lru_page only on failure. That makes code more readable and doesn't add overhead in put_page. Comment from Vlastimil "Yeah, and compaction (perhaps also other migration users) has to drain the lru pvec... Getting rid of this stuff is worth even by itself." Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:02 +00:00
* which will not free the page because new page owner increased
* refcounter.
mm: use put_page() to free page instead of putback_lru_page() Recently, I got many reports about perfermance degradation in embedded system(Android mobile phone, webOS TV and so on) and easy fork fail. The problem was fragmentation caused by zram and GPU driver mainly. With memory pressure, their pages were spread out all of pageblock and it cannot be migrated with current compaction algorithm which supports only LRU pages. In the end, compaction cannot work well so reclaimer shrinks all of working set pages. It made system very slow and even to fail to fork easily which requires order-[2 or 3] allocations. Other pain point is that they cannot use CMA memory space so when OOM kill happens, I can see many free pages in CMA area, which is not memory efficient. In our product which has big CMA memory, it reclaims zones too exccessively to allocate GPU and zram page although there are lots of free space in CMA so system becomes very slow easily. To solve these problem, this patch tries to add facility to migrate non-lru pages via introducing new functions and page flags to help migration. struct address_space_operations { .. .. bool (*isolate_page)(struct page *, isolate_mode_t); void (*putback_page)(struct page *); .. } new page flags PG_movable PG_isolated For details, please read description in "mm: migrate: support non-lru movable page migration". Originally, Gioh Kim had tried to support this feature but he moved so I took over the work. I took many code from his work and changed a little bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to have many credit, too. And I should mention Chulmin who have tested this patchset heavily so I can find many bugs from him. :) Thanks, Gioh, Konstantin and Chulmin! This patchset consists of five parts. 1. clean up migration mm: use put_page to free page instead of putback_lru_page 2. add non-lru page migration feature mm: migrate: support non-lru movable page migration 3. rework KVM memory-ballooning mm: balloon: use general non-lru movable page feature 4. zsmalloc refactoring for preparing page migration zsmalloc: keep max_object in size_class zsmalloc: use bit_spin_lock zsmalloc: use accessor zsmalloc: factor page chain functionality out zsmalloc: introduce zspage structure zsmalloc: separate free_zspage from putback_zspage zsmalloc: use freeobj for index 5. zsmalloc page migration zsmalloc: page migration support zram: use __GFP_MOVABLE for memory allocation This patch (of 12): Procedure of page migration is as follows: First of all, it should isolate a page from LRU and try to migrate the page. If it is successful, it releases the page for freeing. Otherwise, it should put the page back to LRU list. For LRU pages, we have used putback_lru_page for both freeing and putback to LRU list. It's okay because put_page is aware of LRU list so if it releases last refcount of the page, it removes the page from LRU list. However, It makes unnecessary operations (e.g., lru_cache_add, pagevec and flags operations. It would be not significant but no worth to do) and harder to support new non-lru page migration because put_page isn't aware of non-lru page's data structure. To solve the problem, we can add new hook in put_page with PageMovable flags check but it can increase overhead in hot path and needs new locking scheme to stabilize the flag check with put_page. So, this patch cleans it up to divide two semantic(ie, put and putback). If migration is successful, use put_page instead of putback_lru_page and use putback_lru_page only on failure. That makes code more readable and doesn't add overhead in put_page. Comment from Vlastimil "Yeah, and compaction (perhaps also other migration users) has to drain the lru pvec... Getting rid of this stuff is worth even by itself." Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:02 +00:00
*/
folio_put(dst);
mm: use put_page() to free page instead of putback_lru_page() Recently, I got many reports about perfermance degradation in embedded system(Android mobile phone, webOS TV and so on) and easy fork fail. The problem was fragmentation caused by zram and GPU driver mainly. With memory pressure, their pages were spread out all of pageblock and it cannot be migrated with current compaction algorithm which supports only LRU pages. In the end, compaction cannot work well so reclaimer shrinks all of working set pages. It made system very slow and even to fail to fork easily which requires order-[2 or 3] allocations. Other pain point is that they cannot use CMA memory space so when OOM kill happens, I can see many free pages in CMA area, which is not memory efficient. In our product which has big CMA memory, it reclaims zones too exccessively to allocate GPU and zram page although there are lots of free space in CMA so system becomes very slow easily. To solve these problem, this patch tries to add facility to migrate non-lru pages via introducing new functions and page flags to help migration. struct address_space_operations { .. .. bool (*isolate_page)(struct page *, isolate_mode_t); void (*putback_page)(struct page *); .. } new page flags PG_movable PG_isolated For details, please read description in "mm: migrate: support non-lru movable page migration". Originally, Gioh Kim had tried to support this feature but he moved so I took over the work. I took many code from his work and changed a little bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to have many credit, too. And I should mention Chulmin who have tested this patchset heavily so I can find many bugs from him. :) Thanks, Gioh, Konstantin and Chulmin! This patchset consists of five parts. 1. clean up migration mm: use put_page to free page instead of putback_lru_page 2. add non-lru page migration feature mm: migrate: support non-lru movable page migration 3. rework KVM memory-ballooning mm: balloon: use general non-lru movable page feature 4. zsmalloc refactoring for preparing page migration zsmalloc: keep max_object in size_class zsmalloc: use bit_spin_lock zsmalloc: use accessor zsmalloc: factor page chain functionality out zsmalloc: introduce zspage structure zsmalloc: separate free_zspage from putback_zspage zsmalloc: use freeobj for index 5. zsmalloc page migration zsmalloc: page migration support zram: use __GFP_MOVABLE for memory allocation This patch (of 12): Procedure of page migration is as follows: First of all, it should isolate a page from LRU and try to migrate the page. If it is successful, it releases the page for freeing. Otherwise, it should put the page back to LRU list. For LRU pages, we have used putback_lru_page for both freeing and putback to LRU list. It's okay because put_page is aware of LRU list so if it releases last refcount of the page, it removes the page from LRU list. However, It makes unnecessary operations (e.g., lru_cache_add, pagevec and flags operations. It would be not significant but no worth to do) and harder to support new non-lru page migration because put_page isn't aware of non-lru page's data structure. To solve the problem, we can add new hook in put_page with PageMovable flags check but it can increase overhead in hot path and needs new locking scheme to stabilize the flag check with put_page. So, this patch cleans it up to divide two semantic(ie, put and putback). If migration is successful, use put_page instead of putback_lru_page and use putback_lru_page only on failure. That makes code more readable and doesn't add overhead in put_page. Comment from Vlastimil "Yeah, and compaction (perhaps also other migration users) has to drain the lru pvec... Getting rid of this stuff is worth even by itself." Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:23:02 +00:00
2020-12-15 03:13:06 +00:00
/*
* A folio that has been migrated has all references removed
* and will be freed.
2020-12-15 03:13:06 +00:00
*/
list_del(&src->lru);
/* Drop an anon_vma reference if we took one */
if (anon_vma)
put_anon_vma(anon_vma);
folio_unlock(src);
migrate_folio_done(src, reason);
return rc;
out:
2020-12-15 03:13:06 +00:00
/*
* A folio that has not been migrated will be restored to
* right list unless we want to retry.
2020-12-15 03:13:06 +00:00
*/
if (rc == -EAGAIN) {
list_add(&dst->lru, prev);
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
__migrate_folio_record(dst, old_page_state, anon_vma);
return rc;
}
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
migrate_folio_undo_src(src, old_page_state & PAGE_WAS_MAPPED,
anon_vma, true, ret);
migrate_folio_undo_dst(dst, true, put_new_folio, private);
return rc;
}
/*
* Counterpart of unmap_and_move_page() for hugepage migration.
*
* This function doesn't wait the completion of hugepage I/O
* because there is no race between I/O and migration for hugepage.
* Note that currently hugepage I/O occurs only in direct I/O
* where no lock is held and PG_writeback is irrelevant,
* and writeback status of all subpages are counted in the reference
* count of the head page (i.e. if all subpages of a 2MB hugepage are
* under direct I/O, the reference of the head page is 512 and a bit more.)
* This means that when we try to migrate hugepage whose subpages are
* doing direct I/O, some references remain after try_to_unmap() and
* hugepage migration fails without data corruption.
*
* There is also no race when direct I/O is issued on the page under migration,
* because then pte is replaced with migration swap entry and direct I/O code
* will wait in the page fault for migration to complete.
*/
static int unmap_and_move_huge_page(new_folio_t get_new_folio,
free_folio_t put_new_folio, unsigned long private,
struct folio *src, int force, enum migrate_mode mode,
int reason, struct list_head *ret)
{
struct folio *dst;
int rc = -EAGAIN;
mm: unmapped page migration avoid unmap+remap overhead Page migration's __unmap_and_move(), and rmap's try_to_unmap(), were created for use on pages almost certainly mapped into userspace. But nowadays compaction often applies them to unmapped page cache pages: which may exacerbate contention on i_mmap_rwsem quite unnecessarily, since try_to_unmap_file() makes no preliminary page_mapped() check. Now check page_mapped() in __unmap_and_move(); and avoid repeating the same overhead in rmap_walk_file() - don't remove_migration_ptes() when we never inserted any. (The PageAnon(page) comment blocks now look even sillier than before, but clean that up on some other occasion. And note in passing that try_to_unmap_one() does not use a migration entry when PageSwapCache, so remove_migration_ptes() will then not update that swap entry to newpage pte: not a big deal, but something else to clean up later.) Davidlohr remarked in "mm,fs: introduce helpers around the i_mmap_mutex" conversion to i_mmap_rwsem, that "The biggest winner of these changes is migration": a part of the reason might be all of that unnecessary taking of i_mmap_mutex in page migration; and it's rather a shame that I didn't get around to sending this patch in before his - this one is much less useful after Davidlohr's conversion to rwsem, but still good. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:19 +00:00
int page_was_mapped = 0;
struct anon_vma *anon_vma = NULL;
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2. While discussing the issue with huge_pte_offset [1], I remembered that there were more outstanding hugetlb races. These issues are: 1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become invalid via a call to huge_pmd_unshare by another thread. 2) hugetlbfs page faults can race with truncation causing invalid global reserve counts and state. A previous attempt was made to use i_mmap_rwsem in this manner as described at [2]. However, those patches were reverted starting with [3] due to locking issues. To effectively use i_mmap_rwsem to address the above issues it needs to be held (in read mode) during page fault processing. However, during fault processing we need to lock the page we will be adding. Lock ordering requires we take page lock before i_mmap_rwsem. Waiting until after taking the page lock is too late in the fault process for the synchronization we want to do. To address this lock ordering issue, the following patches change the lock ordering for hugetlb pages. This is not too invasive as hugetlbfs processing is done separate from core mm in many places. However, I don't really like this idea. Much ugliness is contained in the new routine hugetlb_page_mapping_lock_write() of patch 1. The only other way I can think of to address these issues is by catching all the races. After catching a race, cleanup, backout, retry ... etc, as needed. This can get really ugly, especially for huge page reservations. At one time, I started writing some of the reservation backout code for page faults and it got so ugly and complicated I went down the path of adding synchronization to avoid the races. Any other suggestions would be welcome. [1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/ [2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/ [3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com [4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/ [5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/ This patch (of 2): While looking at BUGs associated with invalid huge page map counts, it was discovered and observed that a huge pte pointer could become 'invalid' and point to another task's page table. Consider the following: A task takes a page fault on a shared hugetlbfs file and calls huge_pte_alloc to get a ptep. Suppose the returned ptep points to a shared pmd. Now, another task truncates the hugetlbfs file. As part of truncation, it unmaps everyone who has the file mapped. If the range being truncated is covered by a shared pmd, huge_pmd_unshare will be called. For all but the last user of the shared pmd, huge_pmd_unshare will clear the pud pointing to the pmd. If the task in the middle of the page fault is not the last user, the ptep returned by huge_pte_alloc now points to another task's page table or worse. This leads to bad things such as incorrect page map/reference counts or invalid memory references. To fix, expand the use of i_mmap_rwsem as follows: - i_mmap_rwsem is held in read mode whenever huge_pmd_share is called. huge_pmd_share is only called via huge_pte_alloc, so callers of huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers of huge_pte_alloc continue to hold the semaphore until finished with the ptep. - i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called. One problem with this scheme is that it requires taking i_mmap_rwsem before taking the page lock during page faults. This is not the order specified in the rest of mm code. Handling of hugetlbfs pages is mostly isolated today. Therefore, we use this alternative locking order for PageHuge() pages. mapping->i_mmap_rwsem hugetlb_fault_mutex (hugetlbfs specific page fault mutex) page->flags PG_locked (lock_page) To help with lock ordering issues, hugetlb_page_mapping_lock_write() is introduced to write lock the i_mmap_rwsem associated with a page. In most cases it is easy to get address_space via vma->vm_file->f_mapping. However, in the case of migration or memory errors for anon pages we do not have an associated vma. A new routine _get_hugetlb_page_mapping() will use anon_vma to get address_space in these cases. Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:05 +00:00
struct address_space *mapping = NULL;
if (folio_ref_count(src) == 1) {
/* page was freed from under us. So we are done. */
folio_putback_active_hugetlb(src);
return MIGRATEPAGE_SUCCESS;
}
dst = get_new_folio(src, private);
if (!dst)
return -ENOMEM;
if (!folio_trylock(src)) {
mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPY Introduce a new migration mode that allow to offload the copy to a device DMA engine. This changes the workflow of migration and not all address_space migratepage callback can support this. This is intended to be use by migrate_vma() which itself is use for thing like HMM (see include/linux/hmm.h). No additional per-filesystem migratepage testing is needed. I disables MIGRATE_SYNC_NO_COPY in all problematic migratepage() callback and i added comment in those to explain why (part of this patch). The commit message is unclear it should say that any callback that wish to support this new mode need to be aware of the difference in the migration flow from other mode. Some of these callbacks do extra locking while copying (aio, zsmalloc, balloon, ...) and for DMA to be effective you want to copy multiple pages in one DMA operations. But in the problematic case you can not easily hold the extra lock accross multiple call to this callback. Usual flow is: For each page { 1 - lock page 2 - call migratepage() callback 3 - (extra locking in some migratepage() callback) 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) 5 - copy page 6 - (unlock any extra lock of migratepage() callback) 7 - return from migratepage() callback 8 - unlock page } The new mode MIGRATE_SYNC_NO_COPY: 1 - lock multiple pages For each page { 2 - call migratepage() callback 3 - abort in all problematic migratepage() callback 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) } // finished all calls to migratepage() callback 5 - DMA copy multiple pages 6 - unlock all the pages To support MIGRATE_SYNC_NO_COPY in the problematic case we would need a new callback migratepages() (for instance) that deals with multiple pages in one transaction. Because the problematic cases are not important for current usage I did not wanted to complexify this patchset even more for no good reason. Link: http://lkml.kernel.org/r/20170817000548.32038-14-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:12:06 +00:00
if (!force)
goto out;
mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPY Introduce a new migration mode that allow to offload the copy to a device DMA engine. This changes the workflow of migration and not all address_space migratepage callback can support this. This is intended to be use by migrate_vma() which itself is use for thing like HMM (see include/linux/hmm.h). No additional per-filesystem migratepage testing is needed. I disables MIGRATE_SYNC_NO_COPY in all problematic migratepage() callback and i added comment in those to explain why (part of this patch). The commit message is unclear it should say that any callback that wish to support this new mode need to be aware of the difference in the migration flow from other mode. Some of these callbacks do extra locking while copying (aio, zsmalloc, balloon, ...) and for DMA to be effective you want to copy multiple pages in one DMA operations. But in the problematic case you can not easily hold the extra lock accross multiple call to this callback. Usual flow is: For each page { 1 - lock page 2 - call migratepage() callback 3 - (extra locking in some migratepage() callback) 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) 5 - copy page 6 - (unlock any extra lock of migratepage() callback) 7 - return from migratepage() callback 8 - unlock page } The new mode MIGRATE_SYNC_NO_COPY: 1 - lock multiple pages For each page { 2 - call migratepage() callback 3 - abort in all problematic migratepage() callback 4 - migrate page state (freeze refcount, update page cache, buffer head, ...) } // finished all calls to migratepage() callback 5 - DMA copy multiple pages 6 - unlock all the pages To support MIGRATE_SYNC_NO_COPY in the problematic case we would need a new callback migratepages() (for instance) that deals with multiple pages in one transaction. Because the problematic cases are not important for current usage I did not wanted to complexify this patchset even more for no good reason. Link: http://lkml.kernel.org/r/20170817000548.32038-14-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 23:12:06 +00:00
switch (mode) {
case MIGRATE_SYNC:
break;
default:
goto out;
}
folio_lock(src);
}
hugetlbfs: fix races and page leaks during migration hugetlb pages should only be migrated if they are 'active'. The routines set/clear_page_huge_active() modify the active state of hugetlb pages. When a new hugetlb page is allocated at fault time, set_page_huge_active is called before the page is locked. Therefore, another thread could race and migrate the page while it is being added to page table by the fault code. This race is somewhat hard to trigger, but can be seen by strategically adding udelay to simulate worst case scheduling behavior. Depending on 'how' the code races, various BUG()s could be triggered. To address this issue, simply delay the set_page_huge_active call until after the page is successfully added to the page table. Hugetlb pages can also be leaked at migration time if the pages are associated with a file in an explicitly mounted hugetlbfs filesystem. For example, consider a two node system with 4GB worth of huge pages available. A program mmaps a 2G file in a hugetlbfs filesystem. It then migrates the pages associated with the file from one node to another. When the program exits, huge page counts are as follows: node0 1024 free_hugepages 1024 nr_hugepages node1 0 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool That is as expected. 2G of huge pages are taken from the free_hugepages counts, and 2G is the size of the file in the explicitly mounted filesystem. If the file is then removed, the counts become: node0 1024 free_hugepages 1024 nr_hugepages node1 1024 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool Note that the filesystem still shows 2G of pages used, while there actually are no huge pages in use. The only way to 'fix' the filesystem accounting is to unmount the filesystem If a hugetlb page is associated with an explicitly mounted filesystem, this information in contained in the page_private field. At migration time, this information is not preserved. To fix, simply transfer page_private from old to new page at migration time if necessary. There is a related race with removing a huge page from a file and migration. When a huge page is removed from the pagecache, the page_mapping() field is cleared, yet page_private remains set until the page is actually freed by free_huge_page(). A page could be migrated while in this state. However, since page_mapping() is not set the hugetlbfs specific routine to transfer page_private is not called and we leak the page count in the filesystem. To fix that, check for this condition before migrating a huge page. If the condition is detected, return EBUSY for the page. Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> [mike.kravetz@oracle.com: v2] Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com [mike.kravetz@oracle.com: update comment and changelog] Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 00:22:02 +00:00
/*
* Check for pages which are in the process of being freed. Without
* folio_mapping() set, hugetlbfs specific move page routine will not
hugetlbfs: fix races and page leaks during migration hugetlb pages should only be migrated if they are 'active'. The routines set/clear_page_huge_active() modify the active state of hugetlb pages. When a new hugetlb page is allocated at fault time, set_page_huge_active is called before the page is locked. Therefore, another thread could race and migrate the page while it is being added to page table by the fault code. This race is somewhat hard to trigger, but can be seen by strategically adding udelay to simulate worst case scheduling behavior. Depending on 'how' the code races, various BUG()s could be triggered. To address this issue, simply delay the set_page_huge_active call until after the page is successfully added to the page table. Hugetlb pages can also be leaked at migration time if the pages are associated with a file in an explicitly mounted hugetlbfs filesystem. For example, consider a two node system with 4GB worth of huge pages available. A program mmaps a 2G file in a hugetlbfs filesystem. It then migrates the pages associated with the file from one node to another. When the program exits, huge page counts are as follows: node0 1024 free_hugepages 1024 nr_hugepages node1 0 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool That is as expected. 2G of huge pages are taken from the free_hugepages counts, and 2G is the size of the file in the explicitly mounted filesystem. If the file is then removed, the counts become: node0 1024 free_hugepages 1024 nr_hugepages node1 1024 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool Note that the filesystem still shows 2G of pages used, while there actually are no huge pages in use. The only way to 'fix' the filesystem accounting is to unmount the filesystem If a hugetlb page is associated with an explicitly mounted filesystem, this information in contained in the page_private field. At migration time, this information is not preserved. To fix, simply transfer page_private from old to new page at migration time if necessary. There is a related race with removing a huge page from a file and migration. When a huge page is removed from the pagecache, the page_mapping() field is cleared, yet page_private remains set until the page is actually freed by free_huge_page(). A page could be migrated while in this state. However, since page_mapping() is not set the hugetlbfs specific routine to transfer page_private is not called and we leak the page count in the filesystem. To fix that, check for this condition before migrating a huge page. If the condition is detected, return EBUSY for the page. Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> [mike.kravetz@oracle.com: v2] Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com [mike.kravetz@oracle.com: update comment and changelog] Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 00:22:02 +00:00
* be called and we could leak usage counts for subpools.
*/
if (hugetlb_folio_subpool(src) && !folio_mapping(src)) {
hugetlbfs: fix races and page leaks during migration hugetlb pages should only be migrated if they are 'active'. The routines set/clear_page_huge_active() modify the active state of hugetlb pages. When a new hugetlb page is allocated at fault time, set_page_huge_active is called before the page is locked. Therefore, another thread could race and migrate the page while it is being added to page table by the fault code. This race is somewhat hard to trigger, but can be seen by strategically adding udelay to simulate worst case scheduling behavior. Depending on 'how' the code races, various BUG()s could be triggered. To address this issue, simply delay the set_page_huge_active call until after the page is successfully added to the page table. Hugetlb pages can also be leaked at migration time if the pages are associated with a file in an explicitly mounted hugetlbfs filesystem. For example, consider a two node system with 4GB worth of huge pages available. A program mmaps a 2G file in a hugetlbfs filesystem. It then migrates the pages associated with the file from one node to another. When the program exits, huge page counts are as follows: node0 1024 free_hugepages 1024 nr_hugepages node1 0 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool That is as expected. 2G of huge pages are taken from the free_hugepages counts, and 2G is the size of the file in the explicitly mounted filesystem. If the file is then removed, the counts become: node0 1024 free_hugepages 1024 nr_hugepages node1 1024 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool Note that the filesystem still shows 2G of pages used, while there actually are no huge pages in use. The only way to 'fix' the filesystem accounting is to unmount the filesystem If a hugetlb page is associated with an explicitly mounted filesystem, this information in contained in the page_private field. At migration time, this information is not preserved. To fix, simply transfer page_private from old to new page at migration time if necessary. There is a related race with removing a huge page from a file and migration. When a huge page is removed from the pagecache, the page_mapping() field is cleared, yet page_private remains set until the page is actually freed by free_huge_page(). A page could be migrated while in this state. However, since page_mapping() is not set the hugetlbfs specific routine to transfer page_private is not called and we leak the page count in the filesystem. To fix that, check for this condition before migrating a huge page. If the condition is detected, return EBUSY for the page. Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> [mike.kravetz@oracle.com: v2] Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com [mike.kravetz@oracle.com: update comment and changelog] Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 00:22:02 +00:00
rc = -EBUSY;
goto out_unlock;
}
if (folio_test_anon(src))
anon_vma = folio_get_anon_vma(src);
if (unlikely(!folio_trylock(dst)))
goto put_anon;
if (folio_mapped(src)) {
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
enum ttu_flags ttu = 0;
hugetlbfs: fix anon huge page migration race Qian Cai reported the following BUG in [1] LTP: starting move_pages12 BUG: unable to handle page fault for address: ffffffffffffffe0 ... RIP: 0010:anon_vma_interval_tree_iter_first+0xa2/0x170 avc_start_pgoff at mm/interval_tree.c:63 Call Trace: rmap_walk_anon+0x141/0xa30 rmap_walk_anon at mm/rmap.c:1864 try_to_unmap+0x209/0x2d0 try_to_unmap at mm/rmap.c:1763 migrate_pages+0x1005/0x1fb0 move_pages_and_store_status.isra.47+0xd7/0x1a0 __x64_sys_move_pages+0xa5c/0x1100 do_syscall_64+0x5f/0x310 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Hugh Dickins diagnosed this as a migration bug caused by code introduced to use i_mmap_rwsem for pmd sharing synchronization. Specifically, the routine unmap_and_move_huge_page() is always passing the TTU_RMAP_LOCKED flag to try_to_unmap() while holding i_mmap_rwsem. This is wrong for anon pages as the anon_vma_lock should be held in this case. Further analysis suggested that i_mmap_rwsem was not required to he held at all when calling try_to_unmap for anon pages as an anon page could never be part of a shared pmd mapping. Discussion also revealed that the hack in hugetlb_page_mapping_lock_write to drop page lock and acquire i_mmap_rwsem is wrong. There is no way to keep mapping valid while dropping page lock. This patch does the following: - Do not take i_mmap_rwsem and set TTU_RMAP_LOCKED for anon pages when calling try_to_unmap. - Remove the hacky code in hugetlb_page_mapping_lock_write. The routine will now simply do a 'trylock' while still holding the page lock. If the trylock fails, it will return NULL. This could impact the callers: - migration calling code will receive -EAGAIN and retry up to the hard coded limit (10). - memory error code will treat the page as BUSY. This will force killing (SIGKILL) instead of SIGBUS any mapping tasks. Do note that this change in behavior only happens when there is a race. None of the standard kernel testing suites actually hit this race, but it is possible. [1] https://lore.kernel.org/lkml/20200708012044.GC992@lca.pw/ [2] https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2010071833100.2214@eggly.anvils/ Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Reported-by: Qian Cai <cai@lca.pw> Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201105195058.78401-1-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14 06:52:16 +00:00
if (!folio_test_anon(src)) {
hugetlbfs: fix anon huge page migration race Qian Cai reported the following BUG in [1] LTP: starting move_pages12 BUG: unable to handle page fault for address: ffffffffffffffe0 ... RIP: 0010:anon_vma_interval_tree_iter_first+0xa2/0x170 avc_start_pgoff at mm/interval_tree.c:63 Call Trace: rmap_walk_anon+0x141/0xa30 rmap_walk_anon at mm/rmap.c:1864 try_to_unmap+0x209/0x2d0 try_to_unmap at mm/rmap.c:1763 migrate_pages+0x1005/0x1fb0 move_pages_and_store_status.isra.47+0xd7/0x1a0 __x64_sys_move_pages+0xa5c/0x1100 do_syscall_64+0x5f/0x310 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Hugh Dickins diagnosed this as a migration bug caused by code introduced to use i_mmap_rwsem for pmd sharing synchronization. Specifically, the routine unmap_and_move_huge_page() is always passing the TTU_RMAP_LOCKED flag to try_to_unmap() while holding i_mmap_rwsem. This is wrong for anon pages as the anon_vma_lock should be held in this case. Further analysis suggested that i_mmap_rwsem was not required to he held at all when calling try_to_unmap for anon pages as an anon page could never be part of a shared pmd mapping. Discussion also revealed that the hack in hugetlb_page_mapping_lock_write to drop page lock and acquire i_mmap_rwsem is wrong. There is no way to keep mapping valid while dropping page lock. This patch does the following: - Do not take i_mmap_rwsem and set TTU_RMAP_LOCKED for anon pages when calling try_to_unmap. - Remove the hacky code in hugetlb_page_mapping_lock_write. The routine will now simply do a 'trylock' while still holding the page lock. If the trylock fails, it will return NULL. This could impact the callers: - migration calling code will receive -EAGAIN and retry up to the hard coded limit (10). - memory error code will treat the page as BUSY. This will force killing (SIGKILL) instead of SIGBUS any mapping tasks. Do note that this change in behavior only happens when there is a race. None of the standard kernel testing suites actually hit this race, but it is possible. [1] https://lore.kernel.org/lkml/20200708012044.GC992@lca.pw/ [2] https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2010071833100.2214@eggly.anvils/ Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Reported-by: Qian Cai <cai@lca.pw> Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201105195058.78401-1-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14 06:52:16 +00:00
/*
* In shared mappings, try_to_unmap could potentially
* call huge_pmd_unshare. Because of this, take
* semaphore in write mode here and set TTU_RMAP_LOCKED
* to let lower levels know we have taken the lock.
*/
mapping = hugetlb_folio_mapping_lock_write(src);
hugetlbfs: fix anon huge page migration race Qian Cai reported the following BUG in [1] LTP: starting move_pages12 BUG: unable to handle page fault for address: ffffffffffffffe0 ... RIP: 0010:anon_vma_interval_tree_iter_first+0xa2/0x170 avc_start_pgoff at mm/interval_tree.c:63 Call Trace: rmap_walk_anon+0x141/0xa30 rmap_walk_anon at mm/rmap.c:1864 try_to_unmap+0x209/0x2d0 try_to_unmap at mm/rmap.c:1763 migrate_pages+0x1005/0x1fb0 move_pages_and_store_status.isra.47+0xd7/0x1a0 __x64_sys_move_pages+0xa5c/0x1100 do_syscall_64+0x5f/0x310 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Hugh Dickins diagnosed this as a migration bug caused by code introduced to use i_mmap_rwsem for pmd sharing synchronization. Specifically, the routine unmap_and_move_huge_page() is always passing the TTU_RMAP_LOCKED flag to try_to_unmap() while holding i_mmap_rwsem. This is wrong for anon pages as the anon_vma_lock should be held in this case. Further analysis suggested that i_mmap_rwsem was not required to he held at all when calling try_to_unmap for anon pages as an anon page could never be part of a shared pmd mapping. Discussion also revealed that the hack in hugetlb_page_mapping_lock_write to drop page lock and acquire i_mmap_rwsem is wrong. There is no way to keep mapping valid while dropping page lock. This patch does the following: - Do not take i_mmap_rwsem and set TTU_RMAP_LOCKED for anon pages when calling try_to_unmap. - Remove the hacky code in hugetlb_page_mapping_lock_write. The routine will now simply do a 'trylock' while still holding the page lock. If the trylock fails, it will return NULL. This could impact the callers: - migration calling code will receive -EAGAIN and retry up to the hard coded limit (10). - memory error code will treat the page as BUSY. This will force killing (SIGKILL) instead of SIGBUS any mapping tasks. Do note that this change in behavior only happens when there is a race. None of the standard kernel testing suites actually hit this race, but it is possible. [1] https://lore.kernel.org/lkml/20200708012044.GC992@lca.pw/ [2] https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2010071833100.2214@eggly.anvils/ Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Reported-by: Qian Cai <cai@lca.pw> Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201105195058.78401-1-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14 06:52:16 +00:00
if (unlikely(!mapping))
goto unlock_put_anon;
ttu = TTU_RMAP_LOCKED;
hugetlbfs: fix anon huge page migration race Qian Cai reported the following BUG in [1] LTP: starting move_pages12 BUG: unable to handle page fault for address: ffffffffffffffe0 ... RIP: 0010:anon_vma_interval_tree_iter_first+0xa2/0x170 avc_start_pgoff at mm/interval_tree.c:63 Call Trace: rmap_walk_anon+0x141/0xa30 rmap_walk_anon at mm/rmap.c:1864 try_to_unmap+0x209/0x2d0 try_to_unmap at mm/rmap.c:1763 migrate_pages+0x1005/0x1fb0 move_pages_and_store_status.isra.47+0xd7/0x1a0 __x64_sys_move_pages+0xa5c/0x1100 do_syscall_64+0x5f/0x310 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Hugh Dickins diagnosed this as a migration bug caused by code introduced to use i_mmap_rwsem for pmd sharing synchronization. Specifically, the routine unmap_and_move_huge_page() is always passing the TTU_RMAP_LOCKED flag to try_to_unmap() while holding i_mmap_rwsem. This is wrong for anon pages as the anon_vma_lock should be held in this case. Further analysis suggested that i_mmap_rwsem was not required to he held at all when calling try_to_unmap for anon pages as an anon page could never be part of a shared pmd mapping. Discussion also revealed that the hack in hugetlb_page_mapping_lock_write to drop page lock and acquire i_mmap_rwsem is wrong. There is no way to keep mapping valid while dropping page lock. This patch does the following: - Do not take i_mmap_rwsem and set TTU_RMAP_LOCKED for anon pages when calling try_to_unmap. - Remove the hacky code in hugetlb_page_mapping_lock_write. The routine will now simply do a 'trylock' while still holding the page lock. If the trylock fails, it will return NULL. This could impact the callers: - migration calling code will receive -EAGAIN and retry up to the hard coded limit (10). - memory error code will treat the page as BUSY. This will force killing (SIGKILL) instead of SIGBUS any mapping tasks. Do note that this change in behavior only happens when there is a race. None of the standard kernel testing suites actually hit this race, but it is possible. [1] https://lore.kernel.org/lkml/20200708012044.GC992@lca.pw/ [2] https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2010071833100.2214@eggly.anvils/ Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Reported-by: Qian Cai <cai@lca.pw> Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201105195058.78401-1-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14 06:52:16 +00:00
}
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2. While discussing the issue with huge_pte_offset [1], I remembered that there were more outstanding hugetlb races. These issues are: 1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become invalid via a call to huge_pmd_unshare by another thread. 2) hugetlbfs page faults can race with truncation causing invalid global reserve counts and state. A previous attempt was made to use i_mmap_rwsem in this manner as described at [2]. However, those patches were reverted starting with [3] due to locking issues. To effectively use i_mmap_rwsem to address the above issues it needs to be held (in read mode) during page fault processing. However, during fault processing we need to lock the page we will be adding. Lock ordering requires we take page lock before i_mmap_rwsem. Waiting until after taking the page lock is too late in the fault process for the synchronization we want to do. To address this lock ordering issue, the following patches change the lock ordering for hugetlb pages. This is not too invasive as hugetlbfs processing is done separate from core mm in many places. However, I don't really like this idea. Much ugliness is contained in the new routine hugetlb_page_mapping_lock_write() of patch 1. The only other way I can think of to address these issues is by catching all the races. After catching a race, cleanup, backout, retry ... etc, as needed. This can get really ugly, especially for huge page reservations. At one time, I started writing some of the reservation backout code for page faults and it got so ugly and complicated I went down the path of adding synchronization to avoid the races. Any other suggestions would be welcome. [1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/ [2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/ [3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com [4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/ [5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/ This patch (of 2): While looking at BUGs associated with invalid huge page map counts, it was discovered and observed that a huge pte pointer could become 'invalid' and point to another task's page table. Consider the following: A task takes a page fault on a shared hugetlbfs file and calls huge_pte_alloc to get a ptep. Suppose the returned ptep points to a shared pmd. Now, another task truncates the hugetlbfs file. As part of truncation, it unmaps everyone who has the file mapped. If the range being truncated is covered by a shared pmd, huge_pmd_unshare will be called. For all but the last user of the shared pmd, huge_pmd_unshare will clear the pud pointing to the pmd. If the task in the middle of the page fault is not the last user, the ptep returned by huge_pte_alloc now points to another task's page table or worse. This leads to bad things such as incorrect page map/reference counts or invalid memory references. To fix, expand the use of i_mmap_rwsem as follows: - i_mmap_rwsem is held in read mode whenever huge_pmd_share is called. huge_pmd_share is only called via huge_pte_alloc, so callers of huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers of huge_pte_alloc continue to hold the semaphore until finished with the ptep. - i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called. One problem with this scheme is that it requires taking i_mmap_rwsem before taking the page lock during page faults. This is not the order specified in the rest of mm code. Handling of hugetlbfs pages is mostly isolated today. Therefore, we use this alternative locking order for PageHuge() pages. mapping->i_mmap_rwsem hugetlb_fault_mutex (hugetlbfs specific page fault mutex) page->flags PG_locked (lock_page) To help with lock ordering issues, hugetlb_page_mapping_lock_write() is introduced to write lock the i_mmap_rwsem associated with a page. In most cases it is easy to get address_space via vma->vm_file->f_mapping. However, in the case of migration or memory errors for anon pages we do not have an associated vma. A new routine _get_hugetlb_page_mapping() will use anon_vma to get address_space in these cases. Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:05 +00:00
try_to_migrate(src, ttu);
mm: unmapped page migration avoid unmap+remap overhead Page migration's __unmap_and_move(), and rmap's try_to_unmap(), were created for use on pages almost certainly mapped into userspace. But nowadays compaction often applies them to unmapped page cache pages: which may exacerbate contention on i_mmap_rwsem quite unnecessarily, since try_to_unmap_file() makes no preliminary page_mapped() check. Now check page_mapped() in __unmap_and_move(); and avoid repeating the same overhead in rmap_walk_file() - don't remove_migration_ptes() when we never inserted any. (The PageAnon(page) comment blocks now look even sillier than before, but clean that up on some other occasion. And note in passing that try_to_unmap_one() does not use a migration entry when PageSwapCache, so remove_migration_ptes() will then not update that swap entry to newpage pte: not a big deal, but something else to clean up later.) Davidlohr remarked in "mm,fs: introduce helpers around the i_mmap_mutex" conversion to i_mmap_rwsem, that "The biggest winner of these changes is migration": a part of the reason might be all of that unnecessary taking of i_mmap_mutex in page migration; and it's rather a shame that I didn't get around to sending this patch in before his - this one is much less useful after Davidlohr's conversion to rwsem, but still good. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:19 +00:00
page_was_mapped = 1;
hugetlbfs: fix anon huge page migration race Qian Cai reported the following BUG in [1] LTP: starting move_pages12 BUG: unable to handle page fault for address: ffffffffffffffe0 ... RIP: 0010:anon_vma_interval_tree_iter_first+0xa2/0x170 avc_start_pgoff at mm/interval_tree.c:63 Call Trace: rmap_walk_anon+0x141/0xa30 rmap_walk_anon at mm/rmap.c:1864 try_to_unmap+0x209/0x2d0 try_to_unmap at mm/rmap.c:1763 migrate_pages+0x1005/0x1fb0 move_pages_and_store_status.isra.47+0xd7/0x1a0 __x64_sys_move_pages+0xa5c/0x1100 do_syscall_64+0x5f/0x310 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Hugh Dickins diagnosed this as a migration bug caused by code introduced to use i_mmap_rwsem for pmd sharing synchronization. Specifically, the routine unmap_and_move_huge_page() is always passing the TTU_RMAP_LOCKED flag to try_to_unmap() while holding i_mmap_rwsem. This is wrong for anon pages as the anon_vma_lock should be held in this case. Further analysis suggested that i_mmap_rwsem was not required to he held at all when calling try_to_unmap for anon pages as an anon page could never be part of a shared pmd mapping. Discussion also revealed that the hack in hugetlb_page_mapping_lock_write to drop page lock and acquire i_mmap_rwsem is wrong. There is no way to keep mapping valid while dropping page lock. This patch does the following: - Do not take i_mmap_rwsem and set TTU_RMAP_LOCKED for anon pages when calling try_to_unmap. - Remove the hacky code in hugetlb_page_mapping_lock_write. The routine will now simply do a 'trylock' while still holding the page lock. If the trylock fails, it will return NULL. This could impact the callers: - migration calling code will receive -EAGAIN and retry up to the hard coded limit (10). - memory error code will treat the page as BUSY. This will force killing (SIGKILL) instead of SIGBUS any mapping tasks. Do note that this change in behavior only happens when there is a race. None of the standard kernel testing suites actually hit this race, but it is possible. [1] https://lore.kernel.org/lkml/20200708012044.GC992@lca.pw/ [2] https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2010071833100.2214@eggly.anvils/ Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Reported-by: Qian Cai <cai@lca.pw> Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201105195058.78401-1-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14 06:52:16 +00:00
if (ttu & TTU_RMAP_LOCKED)
hugetlbfs: fix anon huge page migration race Qian Cai reported the following BUG in [1] LTP: starting move_pages12 BUG: unable to handle page fault for address: ffffffffffffffe0 ... RIP: 0010:anon_vma_interval_tree_iter_first+0xa2/0x170 avc_start_pgoff at mm/interval_tree.c:63 Call Trace: rmap_walk_anon+0x141/0xa30 rmap_walk_anon at mm/rmap.c:1864 try_to_unmap+0x209/0x2d0 try_to_unmap at mm/rmap.c:1763 migrate_pages+0x1005/0x1fb0 move_pages_and_store_status.isra.47+0xd7/0x1a0 __x64_sys_move_pages+0xa5c/0x1100 do_syscall_64+0x5f/0x310 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Hugh Dickins diagnosed this as a migration bug caused by code introduced to use i_mmap_rwsem for pmd sharing synchronization. Specifically, the routine unmap_and_move_huge_page() is always passing the TTU_RMAP_LOCKED flag to try_to_unmap() while holding i_mmap_rwsem. This is wrong for anon pages as the anon_vma_lock should be held in this case. Further analysis suggested that i_mmap_rwsem was not required to he held at all when calling try_to_unmap for anon pages as an anon page could never be part of a shared pmd mapping. Discussion also revealed that the hack in hugetlb_page_mapping_lock_write to drop page lock and acquire i_mmap_rwsem is wrong. There is no way to keep mapping valid while dropping page lock. This patch does the following: - Do not take i_mmap_rwsem and set TTU_RMAP_LOCKED for anon pages when calling try_to_unmap. - Remove the hacky code in hugetlb_page_mapping_lock_write. The routine will now simply do a 'trylock' while still holding the page lock. If the trylock fails, it will return NULL. This could impact the callers: - migration calling code will receive -EAGAIN and retry up to the hard coded limit (10). - memory error code will treat the page as BUSY. This will force killing (SIGKILL) instead of SIGBUS any mapping tasks. Do note that this change in behavior only happens when there is a race. None of the standard kernel testing suites actually hit this race, but it is possible. [1] https://lore.kernel.org/lkml/20200708012044.GC992@lca.pw/ [2] https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2010071833100.2214@eggly.anvils/ Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Reported-by: Qian Cai <cai@lca.pw> Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201105195058.78401-1-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14 06:52:16 +00:00
i_mmap_unlock_write(mapping);
mm: unmapped page migration avoid unmap+remap overhead Page migration's __unmap_and_move(), and rmap's try_to_unmap(), were created for use on pages almost certainly mapped into userspace. But nowadays compaction often applies them to unmapped page cache pages: which may exacerbate contention on i_mmap_rwsem quite unnecessarily, since try_to_unmap_file() makes no preliminary page_mapped() check. Now check page_mapped() in __unmap_and_move(); and avoid repeating the same overhead in rmap_walk_file() - don't remove_migration_ptes() when we never inserted any. (The PageAnon(page) comment blocks now look even sillier than before, but clean that up on some other occasion. And note in passing that try_to_unmap_one() does not use a migration entry when PageSwapCache, so remove_migration_ptes() will then not update that swap entry to newpage pte: not a big deal, but something else to clean up later.) Davidlohr remarked in "mm,fs: introduce helpers around the i_mmap_mutex" conversion to i_mmap_rwsem, that "The biggest winner of these changes is migration": a part of the reason might be all of that unnecessary taking of i_mmap_mutex in page migration; and it's rather a shame that I didn't get around to sending this patch in before his - this one is much less useful after Davidlohr's conversion to rwsem, but still good. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 00:56:19 +00:00
}
if (!folio_mapped(src))
rc = move_to_new_folio(dst, src, mode);
hugetlbfs: fix anon huge page migration race Qian Cai reported the following BUG in [1] LTP: starting move_pages12 BUG: unable to handle page fault for address: ffffffffffffffe0 ... RIP: 0010:anon_vma_interval_tree_iter_first+0xa2/0x170 avc_start_pgoff at mm/interval_tree.c:63 Call Trace: rmap_walk_anon+0x141/0xa30 rmap_walk_anon at mm/rmap.c:1864 try_to_unmap+0x209/0x2d0 try_to_unmap at mm/rmap.c:1763 migrate_pages+0x1005/0x1fb0 move_pages_and_store_status.isra.47+0xd7/0x1a0 __x64_sys_move_pages+0xa5c/0x1100 do_syscall_64+0x5f/0x310 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Hugh Dickins diagnosed this as a migration bug caused by code introduced to use i_mmap_rwsem for pmd sharing synchronization. Specifically, the routine unmap_and_move_huge_page() is always passing the TTU_RMAP_LOCKED flag to try_to_unmap() while holding i_mmap_rwsem. This is wrong for anon pages as the anon_vma_lock should be held in this case. Further analysis suggested that i_mmap_rwsem was not required to he held at all when calling try_to_unmap for anon pages as an anon page could never be part of a shared pmd mapping. Discussion also revealed that the hack in hugetlb_page_mapping_lock_write to drop page lock and acquire i_mmap_rwsem is wrong. There is no way to keep mapping valid while dropping page lock. This patch does the following: - Do not take i_mmap_rwsem and set TTU_RMAP_LOCKED for anon pages when calling try_to_unmap. - Remove the hacky code in hugetlb_page_mapping_lock_write. The routine will now simply do a 'trylock' while still holding the page lock. If the trylock fails, it will return NULL. This could impact the callers: - migration calling code will receive -EAGAIN and retry up to the hard coded limit (10). - memory error code will treat the page as BUSY. This will force killing (SIGKILL) instead of SIGBUS any mapping tasks. Do note that this change in behavior only happens when there is a race. None of the standard kernel testing suites actually hit this race, but it is possible. [1] https://lore.kernel.org/lkml/20200708012044.GC992@lca.pw/ [2] https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2010071833100.2214@eggly.anvils/ Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Reported-by: Qian Cai <cai@lca.pw> Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201105195058.78401-1-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14 06:52:16 +00:00
if (page_was_mapped)
remove_migration_ptes(src,
rc == MIGRATEPAGE_SUCCESS ? dst : src, false);
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2. While discussing the issue with huge_pte_offset [1], I remembered that there were more outstanding hugetlb races. These issues are: 1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become invalid via a call to huge_pmd_unshare by another thread. 2) hugetlbfs page faults can race with truncation causing invalid global reserve counts and state. A previous attempt was made to use i_mmap_rwsem in this manner as described at [2]. However, those patches were reverted starting with [3] due to locking issues. To effectively use i_mmap_rwsem to address the above issues it needs to be held (in read mode) during page fault processing. However, during fault processing we need to lock the page we will be adding. Lock ordering requires we take page lock before i_mmap_rwsem. Waiting until after taking the page lock is too late in the fault process for the synchronization we want to do. To address this lock ordering issue, the following patches change the lock ordering for hugetlb pages. This is not too invasive as hugetlbfs processing is done separate from core mm in many places. However, I don't really like this idea. Much ugliness is contained in the new routine hugetlb_page_mapping_lock_write() of patch 1. The only other way I can think of to address these issues is by catching all the races. After catching a race, cleanup, backout, retry ... etc, as needed. This can get really ugly, especially for huge page reservations. At one time, I started writing some of the reservation backout code for page faults and it got so ugly and complicated I went down the path of adding synchronization to avoid the races. Any other suggestions would be welcome. [1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/ [2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/ [3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com [4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/ [5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/ This patch (of 2): While looking at BUGs associated with invalid huge page map counts, it was discovered and observed that a huge pte pointer could become 'invalid' and point to another task's page table. Consider the following: A task takes a page fault on a shared hugetlbfs file and calls huge_pte_alloc to get a ptep. Suppose the returned ptep points to a shared pmd. Now, another task truncates the hugetlbfs file. As part of truncation, it unmaps everyone who has the file mapped. If the range being truncated is covered by a shared pmd, huge_pmd_unshare will be called. For all but the last user of the shared pmd, huge_pmd_unshare will clear the pud pointing to the pmd. If the task in the middle of the page fault is not the last user, the ptep returned by huge_pte_alloc now points to another task's page table or worse. This leads to bad things such as incorrect page map/reference counts or invalid memory references. To fix, expand the use of i_mmap_rwsem as follows: - i_mmap_rwsem is held in read mode whenever huge_pmd_share is called. huge_pmd_share is only called via huge_pte_alloc, so callers of huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers of huge_pte_alloc continue to hold the semaphore until finished with the ptep. - i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called. One problem with this scheme is that it requires taking i_mmap_rwsem before taking the page lock during page faults. This is not the order specified in the rest of mm code. Handling of hugetlbfs pages is mostly isolated today. Therefore, we use this alternative locking order for PageHuge() pages. mapping->i_mmap_rwsem hugetlb_fault_mutex (hugetlbfs specific page fault mutex) page->flags PG_locked (lock_page) To help with lock ordering issues, hugetlb_page_mapping_lock_write() is introduced to write lock the i_mmap_rwsem associated with a page. In most cases it is easy to get address_space via vma->vm_file->f_mapping. However, in the case of migration or memory errors for anon pages we do not have an associated vma. A new routine _get_hugetlb_page_mapping() will use anon_vma to get address_space in these cases. Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:05 +00:00
unlock_put_anon:
folio_unlock(dst);
put_anon:
if (anon_vma)
put_anon_vma(anon_vma);
if (rc == MIGRATEPAGE_SUCCESS) {
move_hugetlb_state(src, dst, reason);
put_new_folio = NULL;
}
hugetlbfs: fix races and page leaks during migration hugetlb pages should only be migrated if they are 'active'. The routines set/clear_page_huge_active() modify the active state of hugetlb pages. When a new hugetlb page is allocated at fault time, set_page_huge_active is called before the page is locked. Therefore, another thread could race and migrate the page while it is being added to page table by the fault code. This race is somewhat hard to trigger, but can be seen by strategically adding udelay to simulate worst case scheduling behavior. Depending on 'how' the code races, various BUG()s could be triggered. To address this issue, simply delay the set_page_huge_active call until after the page is successfully added to the page table. Hugetlb pages can also be leaked at migration time if the pages are associated with a file in an explicitly mounted hugetlbfs filesystem. For example, consider a two node system with 4GB worth of huge pages available. A program mmaps a 2G file in a hugetlbfs filesystem. It then migrates the pages associated with the file from one node to another. When the program exits, huge page counts are as follows: node0 1024 free_hugepages 1024 nr_hugepages node1 0 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool That is as expected. 2G of huge pages are taken from the free_hugepages counts, and 2G is the size of the file in the explicitly mounted filesystem. If the file is then removed, the counts become: node0 1024 free_hugepages 1024 nr_hugepages node1 1024 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool Note that the filesystem still shows 2G of pages used, while there actually are no huge pages in use. The only way to 'fix' the filesystem accounting is to unmount the filesystem If a hugetlb page is associated with an explicitly mounted filesystem, this information in contained in the page_private field. At migration time, this information is not preserved. To fix, simply transfer page_private from old to new page at migration time if necessary. There is a related race with removing a huge page from a file and migration. When a huge page is removed from the pagecache, the page_mapping() field is cleared, yet page_private remains set until the page is actually freed by free_huge_page(). A page could be migrated while in this state. However, since page_mapping() is not set the hugetlbfs specific routine to transfer page_private is not called and we leak the page count in the filesystem. To fix that, check for this condition before migrating a huge page. If the condition is detected, return EBUSY for the page. Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> [mike.kravetz@oracle.com: v2] Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com [mike.kravetz@oracle.com: update comment and changelog] Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 00:22:02 +00:00
out_unlock:
folio_unlock(src);
out:
2020-12-15 03:13:06 +00:00
if (rc == MIGRATEPAGE_SUCCESS)
folio_putback_active_hugetlb(src);
else if (rc != -EAGAIN)
list_move_tail(&src->lru, ret);
/*
* If migration was not successful and there's a freeing callback, use
* it. Otherwise, put_page() will drop the reference grabbed during
* isolation.
*/
if (put_new_folio)
put_new_folio(dst, private);
else
folio_putback_active_hugetlb(dst);
return rc;
}
mm/migrate: fix deadlock in migrate_pages_batch() on large folios Currently, migrate_pages_batch() can lock multiple locked folios with an arbitrary order. Although folio_trylock() is used to avoid deadlock as commit 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously firstly") mentioned, it seems try_split_folio() is still missing. It was found by compaction stress test when I explicitly enable EROFS compressed files to use large folios, which case I cannot reproduce with the same workload if large folio support is off (current mainline). Typically, filesystem reads (with locked file-backed folios) could use another bdev/meta inode to load some other I/Os (e.g. inode extent metadata or caching compressed data), so the locking order will be: file-backed folios (A) bdev/meta folios (B) The following calltrace shows the deadlock: Thread 1 takes (B) lock and tries to take folio (A) lock Thread 2 takes (A) lock and tries to take folio (B) lock [Thread 1] INFO: task stress:1824 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1824 tgid:1824 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio mapping ffff00036d69cb18 index 996 (**) __folio_lock+0x24/0x38 migrate_pages_batch+0x77c/0xea0 // try_split_folio (mm/migrate.c:1486:2) // migrate_pages_batch (mm/migrate.c:1734:16) <--- LIST_HEAD(unmap_folios) has .. folio mapping 0xffff0000d184f1d8 index 1711; (*) folio mapping 0xffff0000d184f1d8 index 1712; .. migrate_pages+0xb28/0xe90 compact_zone+0xa08/0x10f0 compact_node+0x9c/0x180 sysctl_compaction_handler+0x8c/0x118 proc_sys_call_handler+0x1a8/0x280 proc_sys_write+0x1c/0x30 vfs_write+0x240/0x380 ksys_write+0x78/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 [Thread 2] INFO: task stress:1825 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1825 tgid:1825 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio = 0xfffffdffc6b503c0 (mapping == 0xffff0000d184f1d8 index == 1711) (*) __folio_lock+0x24/0x38 z_erofs_runqueue+0x384/0x9c0 [erofs] z_erofs_readahead+0x21c/0x350 [erofs] <-- folio mapping 0xffff00036d69cb18 range from [992, 1024] (**) read_pages+0x74/0x328 page_cache_ra_order+0x26c/0x348 ondemand_readahead+0x1c0/0x3a0 page_cache_sync_ra+0x9c/0xc0 filemap_get_pages+0xc4/0x708 filemap_read+0x104/0x3a8 generic_file_read_iter+0x4c/0x150 vfs_read+0x27c/0x330 ksys_pread64+0x84/0xd0 __arm64_sys_pread64+0x28/0x40 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Link: https://lkml.kernel.org/r/20240729021306.398286-1-hsiangkao@linux.alibaba.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-29 02:13:06 +00:00
static inline int try_split_folio(struct folio *folio, struct list_head *split_folios,
enum migrate_mode mode)
{
int rc;
mm/migrate: fix deadlock in migrate_pages_batch() on large folios Currently, migrate_pages_batch() can lock multiple locked folios with an arbitrary order. Although folio_trylock() is used to avoid deadlock as commit 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously firstly") mentioned, it seems try_split_folio() is still missing. It was found by compaction stress test when I explicitly enable EROFS compressed files to use large folios, which case I cannot reproduce with the same workload if large folio support is off (current mainline). Typically, filesystem reads (with locked file-backed folios) could use another bdev/meta inode to load some other I/Os (e.g. inode extent metadata or caching compressed data), so the locking order will be: file-backed folios (A) bdev/meta folios (B) The following calltrace shows the deadlock: Thread 1 takes (B) lock and tries to take folio (A) lock Thread 2 takes (A) lock and tries to take folio (B) lock [Thread 1] INFO: task stress:1824 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1824 tgid:1824 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio mapping ffff00036d69cb18 index 996 (**) __folio_lock+0x24/0x38 migrate_pages_batch+0x77c/0xea0 // try_split_folio (mm/migrate.c:1486:2) // migrate_pages_batch (mm/migrate.c:1734:16) <--- LIST_HEAD(unmap_folios) has .. folio mapping 0xffff0000d184f1d8 index 1711; (*) folio mapping 0xffff0000d184f1d8 index 1712; .. migrate_pages+0xb28/0xe90 compact_zone+0xa08/0x10f0 compact_node+0x9c/0x180 sysctl_compaction_handler+0x8c/0x118 proc_sys_call_handler+0x1a8/0x280 proc_sys_write+0x1c/0x30 vfs_write+0x240/0x380 ksys_write+0x78/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 [Thread 2] INFO: task stress:1825 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1825 tgid:1825 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio = 0xfffffdffc6b503c0 (mapping == 0xffff0000d184f1d8 index == 1711) (*) __folio_lock+0x24/0x38 z_erofs_runqueue+0x384/0x9c0 [erofs] z_erofs_readahead+0x21c/0x350 [erofs] <-- folio mapping 0xffff00036d69cb18 range from [992, 1024] (**) read_pages+0x74/0x328 page_cache_ra_order+0x26c/0x348 ondemand_readahead+0x1c0/0x3a0 page_cache_sync_ra+0x9c/0xc0 filemap_get_pages+0xc4/0x708 filemap_read+0x104/0x3a8 generic_file_read_iter+0x4c/0x150 vfs_read+0x27c/0x330 ksys_pread64+0x84/0xd0 __arm64_sys_pread64+0x28/0x40 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Link: https://lkml.kernel.org/r/20240729021306.398286-1-hsiangkao@linux.alibaba.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-29 02:13:06 +00:00
if (mode == MIGRATE_ASYNC) {
if (!folio_trylock(folio))
return -EAGAIN;
} else {
folio_lock(folio);
}
rc = split_folio_to_list(folio, split_folios);
folio_unlock(folio);
if (!rc)
list_move_tail(&folio->lru, split_folios);
return rc;
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define NR_MAX_BATCHED_MIGRATION HPAGE_PMD_NR
#else
#define NR_MAX_BATCHED_MIGRATION 512
#endif
#define NR_MAX_MIGRATE_PAGES_RETRY 10
#define NR_MAX_MIGRATE_ASYNC_RETRY 3
#define NR_MAX_MIGRATE_SYNC_RETRY \
(NR_MAX_MIGRATE_PAGES_RETRY - NR_MAX_MIGRATE_ASYNC_RETRY)
migrate_pages: organize stats with struct migrate_pages_stats Patch series "migrate_pages(): batch TLB flushing", v5. Now, migrate_pages() migrates folios one by one, like the fake code as follows, for each folio unmap flush TLB copy restore map If multiple folios are passed to migrate_pages(), there are opportunities to batch the TLB flushing and copying. That is, we can change the code to something as follows, for each folio unmap for each folio flush TLB for each folio copy for each folio restore map The total number of TLB flushing IPI can be reduced considerably. And we may use some hardware accelerator such as DSA to accelerate the folio copying. So in this patch, we refactor the migrate_pages() implementation and implement the TLB flushing batching. Base on this, hardware accelerated folio copying can be implemented. If too many folios are passed to migrate_pages(), in the naive batched implementation, we may unmap too many folios at the same time. The possibility for a task to wait for the migrated folios to be mapped again increases. So the latency may be hurt. To deal with this issue, the max number of folios be unmapped in batch is restricted to no more than HPAGE_PMD_NR in the unit of page. That is, the influence is at the same level of THP migration. We use the following test to measure the performance impact of the patchset, On a 2-socket Intel server, - Run pmbench memory accessing benchmark - Run `migratepages` to migrate pages of pmbench between node 0 and node 1 back and forth. With the patch, the TLB flushing IPI reduces 99.1% during the test and the number of pages migrated successfully per second increases 291.7%. Xin Hao helped to test the patchset on an ARM64 server with 128 cores, 2 NUMA nodes. Test results show that the page migration performance increases up to 78%. This patch (of 9): Define struct migrate_pages_stats to organize the various statistics in migrate_pages(). This makes it easier to collect and consume the statistics in multiple functions. This will be needed in the following patches in the series. Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Bharata B Rao <bharata@amd.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 12:34:36 +00:00
struct migrate_pages_stats {
int nr_succeeded; /* Normal and large folios migrated successfully, in
units of base pages */
int nr_failed_pages; /* Normal and large folios failed to be migrated, in
units of base pages. Untried folios aren't counted */
int nr_thp_succeeded; /* THP migrated successfully */
int nr_thp_failed; /* THP failed to be migrated */
int nr_thp_split; /* THP split before migrating */
int nr_split; /* Large folio (include THP) split before migrating */
migrate_pages: organize stats with struct migrate_pages_stats Patch series "migrate_pages(): batch TLB flushing", v5. Now, migrate_pages() migrates folios one by one, like the fake code as follows, for each folio unmap flush TLB copy restore map If multiple folios are passed to migrate_pages(), there are opportunities to batch the TLB flushing and copying. That is, we can change the code to something as follows, for each folio unmap for each folio flush TLB for each folio copy for each folio restore map The total number of TLB flushing IPI can be reduced considerably. And we may use some hardware accelerator such as DSA to accelerate the folio copying. So in this patch, we refactor the migrate_pages() implementation and implement the TLB flushing batching. Base on this, hardware accelerated folio copying can be implemented. If too many folios are passed to migrate_pages(), in the naive batched implementation, we may unmap too many folios at the same time. The possibility for a task to wait for the migrated folios to be mapped again increases. So the latency may be hurt. To deal with this issue, the max number of folios be unmapped in batch is restricted to no more than HPAGE_PMD_NR in the unit of page. That is, the influence is at the same level of THP migration. We use the following test to measure the performance impact of the patchset, On a 2-socket Intel server, - Run pmbench memory accessing benchmark - Run `migratepages` to migrate pages of pmbench between node 0 and node 1 back and forth. With the patch, the TLB flushing IPI reduces 99.1% during the test and the number of pages migrated successfully per second increases 291.7%. Xin Hao helped to test the patchset on an ARM64 server with 128 cores, 2 NUMA nodes. Test results show that the page migration performance increases up to 78%. This patch (of 9): Define struct migrate_pages_stats to organize the various statistics in migrate_pages(). This makes it easier to collect and consume the statistics in multiple functions. This will be needed in the following patches in the series. Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Bharata B Rao <bharata@amd.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 12:34:36 +00:00
};
/*
* Returns the number of hugetlb folios that were not migrated, or an error code
* after NR_MAX_MIGRATE_PAGES_RETRY attempts or if no hugetlb folios are movable
* any more because the list has become empty or no retryable hugetlb folios
* exist any more. It is caller's responsibility to call putback_movable_pages()
* only if ret != 0.
*/
static int migrate_hugetlbs(struct list_head *from, new_folio_t get_new_folio,
free_folio_t put_new_folio, unsigned long private,
enum migrate_mode mode, int reason,
struct migrate_pages_stats *stats,
struct list_head *ret_folios)
{
int retry = 1;
int nr_failed = 0;
int nr_retry_pages = 0;
int pass = 0;
struct folio *folio, *folio2;
int rc, nr_pages;
for (pass = 0; pass < NR_MAX_MIGRATE_PAGES_RETRY && retry; pass++) {
retry = 0;
nr_retry_pages = 0;
list_for_each_entry_safe(folio, folio2, from, lru) {
if (!folio_test_hugetlb(folio))
continue;
nr_pages = folio_nr_pages(folio);
cond_resched();
/*
* Migratability of hugepages depends on architectures and
* their size. This check is necessary because some callers
* of hugepage migration like soft offline and memory
* hotremove don't walk through page tables or check whether
* the hugepage is pmd-based or not before kicking migration.
*/
if (!hugepage_migration_supported(folio_hstate(folio))) {
nr_failed++;
stats->nr_failed_pages += nr_pages;
list_move_tail(&folio->lru, ret_folios);
continue;
}
rc = unmap_and_move_huge_page(get_new_folio,
put_new_folio, private,
folio, pass > 2, mode,
reason, ret_folios);
/*
* The rules are:
* Success: hugetlb folio will be put back
* -EAGAIN: stay on the from list
* -ENOMEM: stay on the from list
* Other errno: put on ret_folios list
*/
switch(rc) {
case -ENOMEM:
/*
* When memory is low, don't bother to try to migrate
* other folios, just exit.
*/
stats->nr_failed_pages += nr_pages + nr_retry_pages;
return -ENOMEM;
case -EAGAIN:
retry++;
nr_retry_pages += nr_pages;
break;
case MIGRATEPAGE_SUCCESS:
stats->nr_succeeded += nr_pages;
break;
default:
/*
* Permanent failure (-EBUSY, etc.):
* unlike -EAGAIN case, the failed folio is
* removed from migration folio list and not
* retried in the next outer loop.
*/
nr_failed++;
stats->nr_failed_pages += nr_pages;
break;
}
}
}
/*
* nr_failed is number of hugetlb folios failed to be migrated. After
* NR_MAX_MIGRATE_PAGES_RETRY attempts, give up and count retried hugetlb
* folios as failed.
*/
nr_failed += retry;
stats->nr_failed_pages += nr_retry_pages;
return nr_failed;
}
/*
* migrate_pages_batch() first unmaps folios in the from list as many as
* possible, then move the unmapped folios.
migrate_pages: fix deadlock in batched migration Patch series "migrate_pages: fix deadlock in batched synchronous migration", v2. Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei. Analysis shows that if we have locked some other folios except the one we are migrating, it's not safe in general to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. So 1/3 fixes the deadlock in a simple way, where the batching support for the synchronous migration is disabled. The change is straightforward and easy to be understood. While 3/3 re-introduce the batching for synchronous migration via trying to migrate asynchronously in batch optimistically, then fall back to migrate synchronously one by one for fail-to-migrate folios. Test shows that this can restore the TLB flushing batching performance for synchronous migration effectively. This patch (of 3): Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei! For example, in the following deadlock trace snippet, INFO: task kworker/u4:0:9 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000 Workqueue: loop4 loop_rootcg_workfn Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? __pfx_wake_page_function+0x10/0x10 __filemap_get_folio+0x73d/0x770 shmem_get_folio_gfp+0x1fd/0xc80 shmem_write_begin+0x91/0x220 generic_perform_write+0x10e/0x2e0 __generic_file_write_iter+0x17e/0x290 ? generic_write_checks+0x12b/0x1a0 generic_file_write_iter+0x97/0x180 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_readv_writev+0x13c/0x210 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_write+0xf6/0x330 vfs_iter_write+0x46/0x70 loop_process_work+0x723/0xfe0 loop_rootcg_workfn+0x28/0x40 process_one_work+0x3cc/0x8d0 worker_thread+0x66/0x630 ? __pfx_worker_thread+0x10/0x10 kthread+0x153/0x190 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> INFO: task repro:1023 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004 Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? compaction_alloc+0x77/0x1150 ? __pfx_wake_page_function+0x10/0x10 folio_wait_bit+0x30/0x40 folio_wait_writeback+0x2e/0x1e0 migrate_pages_batch+0x555/0x1ac0 ? __pfx_compaction_alloc+0x10/0x10 ? __pfx_compaction_free+0x10/0x10 ? __this_cpu_preempt_check+0x17/0x20 ? lock_is_held_type+0xe6/0x140 migrate_pages+0x100e/0x1180 ? __pfx_compaction_free+0x10/0x10 ? __pfx_compaction_alloc+0x10/0x10 compact_zone+0xe10/0x1b50 ? lock_is_held_type+0xe6/0x140 ? check_preemption_disabled+0x80/0xf0 compact_node+0xa3/0x100 ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 ? _find_first_bit+0x7b/0x90 sysctl_compaction_handler+0x5d/0xb0 proc_sys_call_handler+0x29d/0x420 proc_sys_write+0x2b/0x40 vfs_write+0x3a3/0x780 ksys_write+0xb7/0x180 __x64_sys_write+0x26/0x30 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f3a2471f59d RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0 R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000 </TASK> The page migration task has held the lock of the shmem folio A, and is waiting the writeback of the folio B of the file system on the loop block device to complete. While the loop worker task which writes back the folio B is waiting to lock the shmem folio A, because the folio A backs the folio B in the loop device. Thus deadlock is triggered. In general, if we have locked some other folios except the one we are migrating, it's not safe to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. To fix the deadlock, in this patch, we avoid to batch the page migration except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting is avoided. The fix can be improved further. We will do that as soon as possible. Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/ Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/ Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/ Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Stefan Roesch <shr@devkernel.io> Cc: Tejun Heo <tj@kernel.org> Cc: Xin Hao <xhao@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 03:01:53 +00:00
*
* We only batch migration if mode == MIGRATE_ASYNC to avoid to wait a
* lock or bit when we have locked more than one folio. Which may cause
* deadlock (e.g., for loop device). So, if mode != MIGRATE_ASYNC, the
* length of the from list must be <= 1.
*/
static int migrate_pages_batch(struct list_head *from,
new_folio_t get_new_folio, free_folio_t put_new_folio,
unsigned long private, enum migrate_mode mode, int reason,
struct list_head *ret_folios, struct list_head *split_folios,
struct migrate_pages_stats *stats, int nr_pass)
{
int retry = 1;
int thp_retry = 1;
int nr_failed = 0;
int nr_retry_pages = 0;
int pass = 0;
bool is_thp = false;
bool is_large = false;
struct folio *folio, *folio2, *dst = NULL, *dst2;
int rc, rc_saved = 0, nr_pages;
LIST_HEAD(unmap_folios);
LIST_HEAD(dst_folios);
bool nosplit = (reason == MR_NUMA_MISPLACED);
migrate_pages: fix deadlock in batched migration Patch series "migrate_pages: fix deadlock in batched synchronous migration", v2. Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei. Analysis shows that if we have locked some other folios except the one we are migrating, it's not safe in general to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. So 1/3 fixes the deadlock in a simple way, where the batching support for the synchronous migration is disabled. The change is straightforward and easy to be understood. While 3/3 re-introduce the batching for synchronous migration via trying to migrate asynchronously in batch optimistically, then fall back to migrate synchronously one by one for fail-to-migrate folios. Test shows that this can restore the TLB flushing batching performance for synchronous migration effectively. This patch (of 3): Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei! For example, in the following deadlock trace snippet, INFO: task kworker/u4:0:9 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000 Workqueue: loop4 loop_rootcg_workfn Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? __pfx_wake_page_function+0x10/0x10 __filemap_get_folio+0x73d/0x770 shmem_get_folio_gfp+0x1fd/0xc80 shmem_write_begin+0x91/0x220 generic_perform_write+0x10e/0x2e0 __generic_file_write_iter+0x17e/0x290 ? generic_write_checks+0x12b/0x1a0 generic_file_write_iter+0x97/0x180 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_readv_writev+0x13c/0x210 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_write+0xf6/0x330 vfs_iter_write+0x46/0x70 loop_process_work+0x723/0xfe0 loop_rootcg_workfn+0x28/0x40 process_one_work+0x3cc/0x8d0 worker_thread+0x66/0x630 ? __pfx_worker_thread+0x10/0x10 kthread+0x153/0x190 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> INFO: task repro:1023 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004 Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? compaction_alloc+0x77/0x1150 ? __pfx_wake_page_function+0x10/0x10 folio_wait_bit+0x30/0x40 folio_wait_writeback+0x2e/0x1e0 migrate_pages_batch+0x555/0x1ac0 ? __pfx_compaction_alloc+0x10/0x10 ? __pfx_compaction_free+0x10/0x10 ? __this_cpu_preempt_check+0x17/0x20 ? lock_is_held_type+0xe6/0x140 migrate_pages+0x100e/0x1180 ? __pfx_compaction_free+0x10/0x10 ? __pfx_compaction_alloc+0x10/0x10 compact_zone+0xe10/0x1b50 ? lock_is_held_type+0xe6/0x140 ? check_preemption_disabled+0x80/0xf0 compact_node+0xa3/0x100 ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 ? _find_first_bit+0x7b/0x90 sysctl_compaction_handler+0x5d/0xb0 proc_sys_call_handler+0x29d/0x420 proc_sys_write+0x2b/0x40 vfs_write+0x3a3/0x780 ksys_write+0xb7/0x180 __x64_sys_write+0x26/0x30 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f3a2471f59d RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0 R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000 </TASK> The page migration task has held the lock of the shmem folio A, and is waiting the writeback of the folio B of the file system on the loop block device to complete. While the loop worker task which writes back the folio B is waiting to lock the shmem folio A, because the folio A backs the folio B in the loop device. Thus deadlock is triggered. In general, if we have locked some other folios except the one we are migrating, it's not safe to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. To fix the deadlock, in this patch, we avoid to batch the page migration except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting is avoided. The fix can be improved further. We will do that as soon as possible. Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/ Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/ Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/ Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Stefan Roesch <shr@devkernel.io> Cc: Tejun Heo <tj@kernel.org> Cc: Xin Hao <xhao@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 03:01:53 +00:00
VM_WARN_ON_ONCE(mode != MIGRATE_ASYNC &&
!list_empty(from) && !list_is_singular(from));
for (pass = 0; pass < nr_pass && retry; pass++) {
retry = 0;
thp_retry = 0;
nr_retry_pages = 0;
list_for_each_entry_safe(folio, folio2, from, lru) {
is_large = folio_test_large(folio);
is_thp = is_large && folio_test_pmd_mappable(folio);
nr_pages = folio_nr_pages(folio);
cond_resched();
mm/migrate: split source folio if it is on deferred split list If the source folio is on deferred split list, it is likely some subpages are not used. Split it before migration to avoid migrating unused subpages. Commit 616b8371539a6 ("mm: thp: enable thp migration in generic path") did not check if a THP is on deferred split list before migration, thus, the destination THP is never put on deferred split list even if the source THP might be. The opportunity of reclaiming free pages in a partially mapped THP during deferred list scanning is lost, but no other harmful consequence is present[1]. [1]: https://lore.kernel.org/linux-mm/03CE3A00-917C-48CC-8E1C-6A98713C817C@nvidia.com/ [zi.yan@sent.com: fix an error in migrate_misplaced_folio()] Link: https://lkml.kernel.org/r/20240326150031.569387-1-zi.yan@sent.com Link: https://lkml.kernel.org/r/20240322193304.522496-1-zi.yan@sent.com Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path") Signed-off-by: Zi Yan <ziy@nvidia.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-22 19:33:04 +00:00
/*
* The rare folio on the deferred split list should
* be split now. It should not count as a failure:
* but increment nr_failed because, without doing so,
* migrate_pages() may report success with (split but
* unmigrated) pages still on its fromlist; whereas it
* always reports success when its fromlist is empty.
* stats->nr_thp_failed should be increased too,
* otherwise stats inconsistency will happen when
* migrate_pages_batch is called via migrate_pages()
* with MIGRATE_SYNC and MIGRATE_ASYNC.
*
mm/migrate: split source folio if it is on deferred split list If the source folio is on deferred split list, it is likely some subpages are not used. Split it before migration to avoid migrating unused subpages. Commit 616b8371539a6 ("mm: thp: enable thp migration in generic path") did not check if a THP is on deferred split list before migration, thus, the destination THP is never put on deferred split list even if the source THP might be. The opportunity of reclaiming free pages in a partially mapped THP during deferred list scanning is lost, but no other harmful consequence is present[1]. [1]: https://lore.kernel.org/linux-mm/03CE3A00-917C-48CC-8E1C-6A98713C817C@nvidia.com/ [zi.yan@sent.com: fix an error in migrate_misplaced_folio()] Link: https://lkml.kernel.org/r/20240326150031.569387-1-zi.yan@sent.com Link: https://lkml.kernel.org/r/20240322193304.522496-1-zi.yan@sent.com Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path") Signed-off-by: Zi Yan <ziy@nvidia.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-22 19:33:04 +00:00
* Only check it without removing it from the list.
* Since the folio can be on deferred_split_scan()
* local list and removing it can cause the local list
* corruption. Folio split process below can handle it
* with the help of folio_ref_freeze().
*
* nr_pages > 2 is needed to avoid checking order-1
* page cache folios. They exist, in contrast to
* non-existent order-1 anonymous folios, and do not
* use _deferred_list.
*/
if (nr_pages > 2 &&
!list_empty(&folio->_deferred_list)) {
mm/migrate: fix deadlock in migrate_pages_batch() on large folios Currently, migrate_pages_batch() can lock multiple locked folios with an arbitrary order. Although folio_trylock() is used to avoid deadlock as commit 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously firstly") mentioned, it seems try_split_folio() is still missing. It was found by compaction stress test when I explicitly enable EROFS compressed files to use large folios, which case I cannot reproduce with the same workload if large folio support is off (current mainline). Typically, filesystem reads (with locked file-backed folios) could use another bdev/meta inode to load some other I/Os (e.g. inode extent metadata or caching compressed data), so the locking order will be: file-backed folios (A) bdev/meta folios (B) The following calltrace shows the deadlock: Thread 1 takes (B) lock and tries to take folio (A) lock Thread 2 takes (A) lock and tries to take folio (B) lock [Thread 1] INFO: task stress:1824 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1824 tgid:1824 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio mapping ffff00036d69cb18 index 996 (**) __folio_lock+0x24/0x38 migrate_pages_batch+0x77c/0xea0 // try_split_folio (mm/migrate.c:1486:2) // migrate_pages_batch (mm/migrate.c:1734:16) <--- LIST_HEAD(unmap_folios) has .. folio mapping 0xffff0000d184f1d8 index 1711; (*) folio mapping 0xffff0000d184f1d8 index 1712; .. migrate_pages+0xb28/0xe90 compact_zone+0xa08/0x10f0 compact_node+0x9c/0x180 sysctl_compaction_handler+0x8c/0x118 proc_sys_call_handler+0x1a8/0x280 proc_sys_write+0x1c/0x30 vfs_write+0x240/0x380 ksys_write+0x78/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 [Thread 2] INFO: task stress:1825 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1825 tgid:1825 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio = 0xfffffdffc6b503c0 (mapping == 0xffff0000d184f1d8 index == 1711) (*) __folio_lock+0x24/0x38 z_erofs_runqueue+0x384/0x9c0 [erofs] z_erofs_readahead+0x21c/0x350 [erofs] <-- folio mapping 0xffff00036d69cb18 range from [992, 1024] (**) read_pages+0x74/0x328 page_cache_ra_order+0x26c/0x348 ondemand_readahead+0x1c0/0x3a0 page_cache_sync_ra+0x9c/0xc0 filemap_get_pages+0xc4/0x708 filemap_read+0x104/0x3a8 generic_file_read_iter+0x4c/0x150 vfs_read+0x27c/0x330 ksys_pread64+0x84/0xd0 __arm64_sys_pread64+0x28/0x40 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Link: https://lkml.kernel.org/r/20240729021306.398286-1-hsiangkao@linux.alibaba.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-29 02:13:06 +00:00
if (!try_split_folio(folio, split_folios, mode)) {
nr_failed++;
stats->nr_thp_failed += is_thp;
mm/migrate: split source folio if it is on deferred split list If the source folio is on deferred split list, it is likely some subpages are not used. Split it before migration to avoid migrating unused subpages. Commit 616b8371539a6 ("mm: thp: enable thp migration in generic path") did not check if a THP is on deferred split list before migration, thus, the destination THP is never put on deferred split list even if the source THP might be. The opportunity of reclaiming free pages in a partially mapped THP during deferred list scanning is lost, but no other harmful consequence is present[1]. [1]: https://lore.kernel.org/linux-mm/03CE3A00-917C-48CC-8E1C-6A98713C817C@nvidia.com/ [zi.yan@sent.com: fix an error in migrate_misplaced_folio()] Link: https://lkml.kernel.org/r/20240326150031.569387-1-zi.yan@sent.com Link: https://lkml.kernel.org/r/20240322193304.522496-1-zi.yan@sent.com Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path") Signed-off-by: Zi Yan <ziy@nvidia.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-22 19:33:04 +00:00
stats->nr_thp_split += is_thp;
stats->nr_split++;
continue;
}
}
/*
* Large folio migration might be unsupported or
* the allocation might be failed so we should retry
* on the same folio with the large folio split
* to normal folios.
*
* Split folios are put in split_folios, and
* we will migrate them after the rest of the
* list is processed.
*/
if (!thp_migration_supported() && is_thp) {
nr_failed++;
stats->nr_thp_failed++;
mm/migrate: fix deadlock in migrate_pages_batch() on large folios Currently, migrate_pages_batch() can lock multiple locked folios with an arbitrary order. Although folio_trylock() is used to avoid deadlock as commit 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously firstly") mentioned, it seems try_split_folio() is still missing. It was found by compaction stress test when I explicitly enable EROFS compressed files to use large folios, which case I cannot reproduce with the same workload if large folio support is off (current mainline). Typically, filesystem reads (with locked file-backed folios) could use another bdev/meta inode to load some other I/Os (e.g. inode extent metadata or caching compressed data), so the locking order will be: file-backed folios (A) bdev/meta folios (B) The following calltrace shows the deadlock: Thread 1 takes (B) lock and tries to take folio (A) lock Thread 2 takes (A) lock and tries to take folio (B) lock [Thread 1] INFO: task stress:1824 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1824 tgid:1824 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio mapping ffff00036d69cb18 index 996 (**) __folio_lock+0x24/0x38 migrate_pages_batch+0x77c/0xea0 // try_split_folio (mm/migrate.c:1486:2) // migrate_pages_batch (mm/migrate.c:1734:16) <--- LIST_HEAD(unmap_folios) has .. folio mapping 0xffff0000d184f1d8 index 1711; (*) folio mapping 0xffff0000d184f1d8 index 1712; .. migrate_pages+0xb28/0xe90 compact_zone+0xa08/0x10f0 compact_node+0x9c/0x180 sysctl_compaction_handler+0x8c/0x118 proc_sys_call_handler+0x1a8/0x280 proc_sys_write+0x1c/0x30 vfs_write+0x240/0x380 ksys_write+0x78/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 [Thread 2] INFO: task stress:1825 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1825 tgid:1825 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio = 0xfffffdffc6b503c0 (mapping == 0xffff0000d184f1d8 index == 1711) (*) __folio_lock+0x24/0x38 z_erofs_runqueue+0x384/0x9c0 [erofs] z_erofs_readahead+0x21c/0x350 [erofs] <-- folio mapping 0xffff00036d69cb18 range from [992, 1024] (**) read_pages+0x74/0x328 page_cache_ra_order+0x26c/0x348 ondemand_readahead+0x1c0/0x3a0 page_cache_sync_ra+0x9c/0xc0 filemap_get_pages+0xc4/0x708 filemap_read+0x104/0x3a8 generic_file_read_iter+0x4c/0x150 vfs_read+0x27c/0x330 ksys_pread64+0x84/0xd0 __arm64_sys_pread64+0x28/0x40 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Link: https://lkml.kernel.org/r/20240729021306.398286-1-hsiangkao@linux.alibaba.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-29 02:13:06 +00:00
if (!try_split_folio(folio, split_folios, mode)) {
stats->nr_thp_split++;
stats->nr_split++;
continue;
}
stats->nr_failed_pages += nr_pages;
list_move_tail(&folio->lru, ret_folios);
continue;
}
rc = migrate_folio_unmap(get_new_folio, put_new_folio,
private, folio, &dst, mode, reason,
ret_folios);
2020-12-15 03:13:06 +00:00
/*
* The rules are:
* Success: folio will be freed
* Unmap: folio will be put on unmap_folios list,
* dst folio put on dst_folios list
2020-12-15 03:13:06 +00:00
* -EAGAIN: stay on the from list
* -ENOMEM: stay on the from list
* Other errno: put on ret_folios list
2020-12-15 03:13:06 +00:00
*/
switch(rc) {
case -ENOMEM:
mm: unclutter THP migration THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by spliting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaning pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [1]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. This patch tries to unclutter the situation by moving the special THP handling up to the migrate_pages layer where it actually belongs. We simply split the THP page into the existing list if unmap_and_move fails with ENOMEM and retry. So we will _always_ migrate all THP subpages and specific migrate_pages users do not have to deal with this case in a special way. [1] http://lkml.kernel.org/r/20171121021855.50525-1-zi.yan@sent.com Link: http://lkml.kernel.org/r/20180103082555.14592-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:30:07 +00:00
/*
* When memory is low, don't bother to try to migrate
* other folios, move unmapped folios, then exit.
mm: unclutter THP migration THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by spliting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaning pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [1]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. This patch tries to unclutter the situation by moving the special THP handling up to the migrate_pages layer where it actually belongs. We simply split the THP page into the existing list if unmap_and_move fails with ENOMEM and retry. So we will _always_ migrate all THP subpages and specific migrate_pages users do not have to deal with this case in a special way. [1] http://lkml.kernel.org/r/20171121021855.50525-1-zi.yan@sent.com Link: http://lkml.kernel.org/r/20180103082555.14592-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:30:07 +00:00
*/
nr_failed++;
stats->nr_thp_failed += is_thp;
/* Large folio NUMA faulting doesn't split to retry. */
if (is_large && !nosplit) {
mm/migrate: fix deadlock in migrate_pages_batch() on large folios Currently, migrate_pages_batch() can lock multiple locked folios with an arbitrary order. Although folio_trylock() is used to avoid deadlock as commit 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously firstly") mentioned, it seems try_split_folio() is still missing. It was found by compaction stress test when I explicitly enable EROFS compressed files to use large folios, which case I cannot reproduce with the same workload if large folio support is off (current mainline). Typically, filesystem reads (with locked file-backed folios) could use another bdev/meta inode to load some other I/Os (e.g. inode extent metadata or caching compressed data), so the locking order will be: file-backed folios (A) bdev/meta folios (B) The following calltrace shows the deadlock: Thread 1 takes (B) lock and tries to take folio (A) lock Thread 2 takes (A) lock and tries to take folio (B) lock [Thread 1] INFO: task stress:1824 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1824 tgid:1824 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio mapping ffff00036d69cb18 index 996 (**) __folio_lock+0x24/0x38 migrate_pages_batch+0x77c/0xea0 // try_split_folio (mm/migrate.c:1486:2) // migrate_pages_batch (mm/migrate.c:1734:16) <--- LIST_HEAD(unmap_folios) has .. folio mapping 0xffff0000d184f1d8 index 1711; (*) folio mapping 0xffff0000d184f1d8 index 1712; .. migrate_pages+0xb28/0xe90 compact_zone+0xa08/0x10f0 compact_node+0x9c/0x180 sysctl_compaction_handler+0x8c/0x118 proc_sys_call_handler+0x1a8/0x280 proc_sys_write+0x1c/0x30 vfs_write+0x240/0x380 ksys_write+0x78/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 [Thread 2] INFO: task stress:1825 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1825 tgid:1825 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio = 0xfffffdffc6b503c0 (mapping == 0xffff0000d184f1d8 index == 1711) (*) __folio_lock+0x24/0x38 z_erofs_runqueue+0x384/0x9c0 [erofs] z_erofs_readahead+0x21c/0x350 [erofs] <-- folio mapping 0xffff00036d69cb18 range from [992, 1024] (**) read_pages+0x74/0x328 page_cache_ra_order+0x26c/0x348 ondemand_readahead+0x1c0/0x3a0 page_cache_sync_ra+0x9c/0xc0 filemap_get_pages+0xc4/0x708 filemap_read+0x104/0x3a8 generic_file_read_iter+0x4c/0x150 vfs_read+0x27c/0x330 ksys_pread64+0x84/0xd0 __arm64_sys_pread64+0x28/0x40 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Link: https://lkml.kernel.org/r/20240729021306.398286-1-hsiangkao@linux.alibaba.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-29 02:13:06 +00:00
int ret = try_split_folio(folio, split_folios, mode);
if (!ret) {
stats->nr_thp_split += is_thp;
stats->nr_split++;
break;
} else if (reason == MR_LONGTERM_PIN &&
ret == -EAGAIN) {
/*
* Try again to split large folio to
* mitigate the failure of longterm pinning.
*/
retry++;
thp_retry += is_thp;
nr_retry_pages += nr_pages;
/* Undo duplicated failure counting. */
nr_failed--;
stats->nr_thp_failed -= is_thp;
break;
mm: unclutter THP migration THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by spliting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaning pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [1]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. This patch tries to unclutter the situation by moving the special THP handling up to the migrate_pages layer where it actually belongs. We simply split the THP page into the existing list if unmap_and_move fails with ENOMEM and retry. So we will _always_ migrate all THP subpages and specific migrate_pages users do not have to deal with this case in a special way. [1] http://lkml.kernel.org/r/20171121021855.50525-1-zi.yan@sent.com Link: http://lkml.kernel.org/r/20180103082555.14592-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:30:07 +00:00
}
}
mm: migrate: fix the return value of migrate_pages() Patch series "Improve the migration stats". According to talk with Zi Yan [1], this patch set changes the return value of migrate_pages() to avoid returning a number which is larger than the number of pages the users tried to migrate by move_pages() syscall. Also fix the hugetlb migration stats and migration stats in trace_mm_compaction_migratepages(). [1] https://lore.kernel.org/linux-mm/7E44019D-2A5D-4BA7-B4D5-00D4712F1687@nvidia.com/ This patch (of 3): As Zi Yan pointed out, the syscall move_pages() can return a non-migrated number larger than the number of pages the users tried to migrate, when a THP page is failed to migrate. This is confusing for users. Since other migration scenarios do not care about the actual non-migrated number of pages except the memory compaction migration which will fix in following patch. Thus we can change the return value to return the number of {normal page, THP, hugetlb} instead to avoid this issue, and the number of THP splits will be considered as the number of non-migrated THP, no matter how many subpages of the THP are migrated successfully. Meanwhile we should still keep the migration counters using the number of normal pages. Link: https://lkml.kernel.org/r/cover.1636275127.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/6486fabc3e8c66ff613e150af25e89b3147977a6.1636275127.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Zi Yan <ziy@nvidia.com> Co-developed-by: Zi Yan <ziy@nvidia.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:08:34 +00:00
stats->nr_failed_pages += nr_pages + nr_retry_pages;
/* nr_failed isn't updated for not used */
stats->nr_thp_failed += thp_retry;
rc_saved = rc;
if (list_empty(&unmap_folios))
goto out;
else
goto move;
case -EAGAIN:
retry++;
thp_retry += is_thp;
nr_retry_pages += nr_pages;
break;
mm: adjust address_space_operations.migratepage() return code Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. This patch-set follows the main idea discussed at 2012 LSFMMS session: "Ballooning for transparent huge pages" -- http://lwn.net/Articles/490114/ to introduce the required changes to the virtio_balloon driver, as well as the changes to the core compaction & migration bits, in order to make those subsystems aware of ballooned pages and allow memory balloon pages become movable within a guest, thus avoiding the aforementioned fragmentation issue Following are numbers that prove this patch benefits on allowing compaction to be more effective at memory ballooned guests. Results for STRESS-HIGHALLOC benchmark, from Mel Gorman's mmtests suite, running on a 4gB RAM KVM guest which was ballooning 512mB RAM in 64mB chunks, at every minute (inflating/deflating), while test was running: ===BEGIN stress-highalloc STRESS-HIGHALLOC highalloc-3.7 highalloc-3.7 rc4-clean rc4-patch Pass 1 55.00 ( 0.00%) 62.00 ( 7.00%) Pass 2 54.00 ( 0.00%) 62.00 ( 8.00%) while Rested 75.00 ( 0.00%) 80.00 ( 5.00%) MMTests Statistics: duration 3.7 3.7 rc4-clean rc4-patch User 1207.59 1207.46 System 1300.55 1299.61 Elapsed 2273.72 2157.06 MMTests Statistics: vmstat 3.7 3.7 rc4-clean rc4-patch Page Ins 3581516 2374368 Page Outs 11148692 10410332 Swap Ins 80 47 Swap Outs 3641 476 Direct pages scanned 37978 33826 Kswapd pages scanned 1828245 1342869 Kswapd pages reclaimed 1710236 1304099 Direct pages reclaimed 32207 31005 Kswapd efficiency 93% 97% Kswapd velocity 804.077 622.546 Direct efficiency 84% 91% Direct velocity 16.703 15.682 Percentage direct scans 2% 2% Page writes by reclaim 79252 9704 Page writes file 75611 9228 Page writes anon 3641 476 Page reclaim immediate 16764 11014 Page rescued immediate 0 0 Slabs scanned 2171904 2152448 Direct inode steals 385 2261 Kswapd inode steals 659137 609670 Kswapd skipped wait 1 69 THP fault alloc 546 631 THP collapse alloc 361 339 THP splits 259 263 THP fault fallback 98 50 THP collapse fail 20 17 Compaction stalls 747 499 Compaction success 244 145 Compaction failures 503 354 Compaction pages moved 370888 474837 Compaction move failure 77378 65259 ===END stress-highalloc This patch: Introduce MIGRATEPAGE_SUCCESS as the default return code for address_space_operations.migratepage() method and documents the expected return code for the same method in failure cases. Signed-off-by: Rafael Aquini <aquini@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 00:02:31 +00:00
case MIGRATEPAGE_SUCCESS:
stats->nr_succeeded += nr_pages;
stats->nr_thp_succeeded += is_thp;
break;
case MIGRATEPAGE_UNMAP:
list_move_tail(&folio->lru, &unmap_folios);
list_add_tail(&dst->lru, &dst_folios);
break;
default:
/*
* Permanent failure (-EBUSY, etc.):
* unlike -EAGAIN case, the failed folio is
* removed from migration folio list and not
* retried in the next outer loop.
*/
nr_failed++;
stats->nr_thp_failed += is_thp;
stats->nr_failed_pages += nr_pages;
break;
}
}
}
nr_failed += retry;
stats->nr_thp_failed += thp_retry;
stats->nr_failed_pages += nr_retry_pages;
move:
migrate_pages: batch flushing TLB The TLB flushing will cost quite some CPU cycles during the folio migration in some situations. For example, when migrate a folio of a process with multiple active threads that run on multiple CPUs. After batching the _unmap and _move in migrate_pages(), the TLB flushing can be batched easily with the existing TLB flush batching mechanism. This patch implements that. We use the following test case to test the patch. On a 2-socket Intel server, - Run pmbench memory accessing benchmark - Run `migratepages` to migrate pages of pmbench between node 0 and node 1 back and forth. With the patch, the TLB flushing IPI reduces 99.1% during the test and the number of pages migrated successfully per second increases 291.7%. Haoxin helped to test the patchset on an ARM64 server with 128 cores, 2 NUMA nodes. Test results show that the page migration performance increases up to 78%. NOTE: TLB flushing is batched only for normal folios, not for THP folios. Because the overhead of TLB flushing for THP folios is much lower than that for normal folios (about 1/512 on x86 platform). Link: https://lkml.kernel.org/r/20230213123444.155149-9-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Bharata B Rao <bharata@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 12:34:43 +00:00
/* Flush TLBs for all unmapped folios */
try_to_unmap_flush();
retry = 1;
for (pass = 0; pass < nr_pass && retry; pass++) {
retry = 0;
thp_retry = 0;
nr_retry_pages = 0;
dst = list_first_entry(&dst_folios, struct folio, lru);
dst2 = list_next_entry(dst, lru);
list_for_each_entry_safe(folio, folio2, &unmap_folios, lru) {
is_thp = folio_test_large(folio) && folio_test_pmd_mappable(folio);
nr_pages = folio_nr_pages(folio);
cond_resched();
rc = migrate_folio_move(put_new_folio, private,
folio, dst, mode,
reason, ret_folios);
/*
* The rules are:
* Success: folio will be freed
* -EAGAIN: stay on the unmap_folios list
* Other errno: put on ret_folios list
*/
switch(rc) {
case -EAGAIN:
retry++;
thp_retry += is_thp;
nr_retry_pages += nr_pages;
break;
case MIGRATEPAGE_SUCCESS:
stats->nr_succeeded += nr_pages;
stats->nr_thp_succeeded += is_thp;
break;
default:
nr_failed++;
stats->nr_thp_failed += is_thp;
stats->nr_failed_pages += nr_pages;
break;
}
dst = dst2;
dst2 = list_next_entry(dst, lru);
}
}
nr_failed += retry;
stats->nr_thp_failed += thp_retry;
stats->nr_failed_pages += nr_retry_pages;
rc = rc_saved ? : nr_failed;
out:
/* Cleanup remaining folios */
dst = list_first_entry(&dst_folios, struct folio, lru);
dst2 = list_next_entry(dst, lru);
list_for_each_entry_safe(folio, folio2, &unmap_folios, lru) {
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
int old_page_state = 0;
struct anon_vma *anon_vma = NULL;
mm: migrate: record the mlocked page status to remove unnecessary lru drain When doing compaction, I found the lru_add_drain() is an obvious hotspot when migrating pages. The distribution of this hotspot is as follows: - 18.75% compact_zone - 17.39% migrate_pages - 13.79% migrate_pages_batch - 11.66% migrate_folio_move - 7.02% lru_add_drain + 7.02% lru_add_drain_cpu + 3.00% move_to_new_folio 1.23% rmap_walk + 1.92% migrate_folio_unmap + 3.20% migrate_pages_sync + 0.90% isolate_migratepages The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate: __unmap_and_move() push good newpage to LRU") to drain the newpage to LRU immediately, to help to build up the correct newpage->mlock_count in remove_migration_ptes() for mlocked pages. However, if there are no mlocked pages are migrating, then we can avoid this lru drain operation, especailly for the heavy concurrent scenarios. So we can record the source pages' mlocked status in migrate_folio_unmap(), and only drain the lru list when the mlocked status is set in migrate_folio_move(). In addition, the page was already isolated from lru when migrating, so checking the mlocked status is stable by folio_test_mlocked() in migrate_folio_unmap(). After this patch, I can see the hotpot of the lru_add_drain() is gone: - 9.41% migrate_pages_batch - 6.15% migrate_folio_move - 3.64% move_to_new_folio + 1.80% migrate_folio_extra + 1.70% buffer_migrate_folio + 1.41% rmap_walk + 0.62% folio_add_lru + 3.07% migrate_folio_unmap Meanwhile, the compaction latency shows some improvements when running thpscale: base patched Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%* Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%* Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%* Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%* Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%* Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%* Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%* Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%* Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%* Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yin Fengwei <fengwei.yin@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 04:33:22 +00:00
__migrate_folio_extract(dst, &old_page_state, &anon_vma);
migrate_folio_undo_src(folio, old_page_state & PAGE_WAS_MAPPED,
anon_vma, true, ret_folios);
list_del(&dst->lru);
migrate_folio_undo_dst(dst, true, put_new_folio, private);
dst = dst2;
dst2 = list_next_entry(dst, lru);
}
return rc;
}
static int migrate_pages_sync(struct list_head *from, new_folio_t get_new_folio,
free_folio_t put_new_folio, unsigned long private,
enum migrate_mode mode, int reason,
struct list_head *ret_folios, struct list_head *split_folios,
struct migrate_pages_stats *stats)
{
int rc, nr_failed = 0;
LIST_HEAD(folios);
struct migrate_pages_stats astats;
memset(&astats, 0, sizeof(astats));
/* Try to migrate in batch with MIGRATE_ASYNC mode firstly */
rc = migrate_pages_batch(from, get_new_folio, put_new_folio, private, MIGRATE_ASYNC,
reason, &folios, split_folios, &astats,
NR_MAX_MIGRATE_ASYNC_RETRY);
stats->nr_succeeded += astats.nr_succeeded;
stats->nr_thp_succeeded += astats.nr_thp_succeeded;
stats->nr_thp_split += astats.nr_thp_split;
stats->nr_split += astats.nr_split;
if (rc < 0) {
stats->nr_failed_pages += astats.nr_failed_pages;
stats->nr_thp_failed += astats.nr_thp_failed;
list_splice_tail(&folios, ret_folios);
return rc;
}
stats->nr_thp_failed += astats.nr_thp_split;
/*
* Do not count rc, as pages will be retried below.
* Count nr_split only, since it includes nr_thp_split.
*/
nr_failed += astats.nr_split;
/*
* Fall back to migrate all failed folios one by one synchronously. All
* failed folios except split THPs will be retried, so their failure
* isn't counted
*/
list_splice_tail_init(&folios, from);
while (!list_empty(from)) {
list_move(from->next, &folios);
rc = migrate_pages_batch(&folios, get_new_folio, put_new_folio,
private, mode, reason, ret_folios,
split_folios, stats, NR_MAX_MIGRATE_SYNC_RETRY);
list_splice_tail_init(&folios, ret_folios);
if (rc < 0)
return rc;
nr_failed += rc;
}
return nr_failed;
}
/*
* migrate_pages - migrate the folios specified in a list, to the free folios
* supplied as the target for the page migration
*
* @from: The list of folios to be migrated.
* @get_new_folio: The function used to allocate free folios to be used
* as the target of the folio migration.
* @put_new_folio: The function used to free target folios if migration
* fails, or NULL if no special handling is necessary.
* @private: Private data to be passed on to get_new_folio()
* @mode: The migration mode that specifies the constraints for
* folio migration, if any.
* @reason: The reason for folio migration.
* @ret_succeeded: Set to the number of folios migrated successfully if
* the caller passes a non-NULL pointer.
*
* The function returns after NR_MAX_MIGRATE_PAGES_RETRY attempts or if no folios
* are movable any more because the list has become empty or no retryable folios
* exist any more. It is caller's responsibility to call putback_movable_pages()
* only if ret != 0.
*
* Returns the number of {normal folio, large folio, hugetlb} that were not
* migrated, or an error code. The number of large folio splits will be
* considered as the number of non-migrated large folio, no matter how many
* split folios of the large folio are migrated successfully.
*/
int migrate_pages(struct list_head *from, new_folio_t get_new_folio,
free_folio_t put_new_folio, unsigned long private,
enum migrate_mode mode, int reason, unsigned int *ret_succeeded)
{
int rc, rc_gather;
int nr_pages;
struct folio *folio, *folio2;
LIST_HEAD(folios);
LIST_HEAD(ret_folios);
LIST_HEAD(split_folios);
struct migrate_pages_stats stats;
trace_mm_migrate_pages_start(mode, reason);
memset(&stats, 0, sizeof(stats));
rc_gather = migrate_hugetlbs(from, get_new_folio, put_new_folio, private,
mode, reason, &stats, &ret_folios);
if (rc_gather < 0)
goto out;
migrate_pages: fix deadlock in batched migration Patch series "migrate_pages: fix deadlock in batched synchronous migration", v2. Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei. Analysis shows that if we have locked some other folios except the one we are migrating, it's not safe in general to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. So 1/3 fixes the deadlock in a simple way, where the batching support for the synchronous migration is disabled. The change is straightforward and easy to be understood. While 3/3 re-introduce the batching for synchronous migration via trying to migrate asynchronously in batch optimistically, then fall back to migrate synchronously one by one for fail-to-migrate folios. Test shows that this can restore the TLB flushing batching performance for synchronous migration effectively. This patch (of 3): Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei! For example, in the following deadlock trace snippet, INFO: task kworker/u4:0:9 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000 Workqueue: loop4 loop_rootcg_workfn Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? __pfx_wake_page_function+0x10/0x10 __filemap_get_folio+0x73d/0x770 shmem_get_folio_gfp+0x1fd/0xc80 shmem_write_begin+0x91/0x220 generic_perform_write+0x10e/0x2e0 __generic_file_write_iter+0x17e/0x290 ? generic_write_checks+0x12b/0x1a0 generic_file_write_iter+0x97/0x180 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_readv_writev+0x13c/0x210 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_write+0xf6/0x330 vfs_iter_write+0x46/0x70 loop_process_work+0x723/0xfe0 loop_rootcg_workfn+0x28/0x40 process_one_work+0x3cc/0x8d0 worker_thread+0x66/0x630 ? __pfx_worker_thread+0x10/0x10 kthread+0x153/0x190 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> INFO: task repro:1023 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004 Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? compaction_alloc+0x77/0x1150 ? __pfx_wake_page_function+0x10/0x10 folio_wait_bit+0x30/0x40 folio_wait_writeback+0x2e/0x1e0 migrate_pages_batch+0x555/0x1ac0 ? __pfx_compaction_alloc+0x10/0x10 ? __pfx_compaction_free+0x10/0x10 ? __this_cpu_preempt_check+0x17/0x20 ? lock_is_held_type+0xe6/0x140 migrate_pages+0x100e/0x1180 ? __pfx_compaction_free+0x10/0x10 ? __pfx_compaction_alloc+0x10/0x10 compact_zone+0xe10/0x1b50 ? lock_is_held_type+0xe6/0x140 ? check_preemption_disabled+0x80/0xf0 compact_node+0xa3/0x100 ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 ? _find_first_bit+0x7b/0x90 sysctl_compaction_handler+0x5d/0xb0 proc_sys_call_handler+0x29d/0x420 proc_sys_write+0x2b/0x40 vfs_write+0x3a3/0x780 ksys_write+0xb7/0x180 __x64_sys_write+0x26/0x30 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f3a2471f59d RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0 R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000 </TASK> The page migration task has held the lock of the shmem folio A, and is waiting the writeback of the folio B of the file system on the loop block device to complete. While the loop worker task which writes back the folio B is waiting to lock the shmem folio A, because the folio A backs the folio B in the loop device. Thus deadlock is triggered. In general, if we have locked some other folios except the one we are migrating, it's not safe to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. To fix the deadlock, in this patch, we avoid to batch the page migration except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting is avoided. The fix can be improved further. We will do that as soon as possible. Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/ Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/ Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/ Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Stefan Roesch <shr@devkernel.io> Cc: Tejun Heo <tj@kernel.org> Cc: Xin Hao <xhao@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 03:01:53 +00:00
again:
nr_pages = 0;
list_for_each_entry_safe(folio, folio2, from, lru) {
/* Retried hugetlb folios will be kept in list */
if (folio_test_hugetlb(folio)) {
list_move_tail(&folio->lru, &ret_folios);
continue;
}
nr_pages += folio_nr_pages(folio);
if (nr_pages >= NR_MAX_BATCHED_MIGRATION)
break;
}
if (nr_pages >= NR_MAX_BATCHED_MIGRATION)
migrate_pages: fix deadlock in batched migration Patch series "migrate_pages: fix deadlock in batched synchronous migration", v2. Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei. Analysis shows that if we have locked some other folios except the one we are migrating, it's not safe in general to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. So 1/3 fixes the deadlock in a simple way, where the batching support for the synchronous migration is disabled. The change is straightforward and easy to be understood. While 3/3 re-introduce the batching for synchronous migration via trying to migrate asynchronously in batch optimistically, then fall back to migrate synchronously one by one for fail-to-migrate folios. Test shows that this can restore the TLB flushing batching performance for synchronous migration effectively. This patch (of 3): Two deadlock bugs were reported for the migrate_pages() batching series. Thanks Hugh and Pengfei! For example, in the following deadlock trace snippet, INFO: task kworker/u4:0:9 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000 Workqueue: loop4 loop_rootcg_workfn Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? __pfx_wake_page_function+0x10/0x10 __filemap_get_folio+0x73d/0x770 shmem_get_folio_gfp+0x1fd/0xc80 shmem_write_begin+0x91/0x220 generic_perform_write+0x10e/0x2e0 __generic_file_write_iter+0x17e/0x290 ? generic_write_checks+0x12b/0x1a0 generic_file_write_iter+0x97/0x180 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_readv_writev+0x13c/0x210 ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 do_iter_write+0xf6/0x330 vfs_iter_write+0x46/0x70 loop_process_work+0x723/0xfe0 loop_rootcg_workfn+0x28/0x40 process_one_work+0x3cc/0x8d0 worker_thread+0x66/0x630 ? __pfx_worker_thread+0x10/0x10 kthread+0x153/0x190 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> INFO: task repro:1023 blocked for more than 147 seconds. Not tainted 6.2.0-rc4-kvm+ #1314 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004 Call Trace: <TASK> __schedule+0x43b/0xd00 schedule+0x6a/0xf0 io_schedule+0x4a/0x80 folio_wait_bit_common+0x1b5/0x4e0 ? compaction_alloc+0x77/0x1150 ? __pfx_wake_page_function+0x10/0x10 folio_wait_bit+0x30/0x40 folio_wait_writeback+0x2e/0x1e0 migrate_pages_batch+0x555/0x1ac0 ? __pfx_compaction_alloc+0x10/0x10 ? __pfx_compaction_free+0x10/0x10 ? __this_cpu_preempt_check+0x17/0x20 ? lock_is_held_type+0xe6/0x140 migrate_pages+0x100e/0x1180 ? __pfx_compaction_free+0x10/0x10 ? __pfx_compaction_alloc+0x10/0x10 compact_zone+0xe10/0x1b50 ? lock_is_held_type+0xe6/0x140 ? check_preemption_disabled+0x80/0xf0 compact_node+0xa3/0x100 ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 ? _find_first_bit+0x7b/0x90 sysctl_compaction_handler+0x5d/0xb0 proc_sys_call_handler+0x29d/0x420 proc_sys_write+0x2b/0x40 vfs_write+0x3a3/0x780 ksys_write+0xb7/0x180 __x64_sys_write+0x26/0x30 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f3a2471f59d RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0 R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000 </TASK> The page migration task has held the lock of the shmem folio A, and is waiting the writeback of the folio B of the file system on the loop block device to complete. While the loop worker task which writes back the folio B is waiting to lock the shmem folio A, because the folio A backs the folio B in the loop device. Thus deadlock is triggered. In general, if we have locked some other folios except the one we are migrating, it's not safe to wait synchronously, for example, to wait the writeback to complete or wait to lock the buffer head. To fix the deadlock, in this patch, we avoid to batch the page migration except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting is avoided. The fix can be improved further. We will do that as soon as possible. Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/ Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/ Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/ Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Stefan Roesch <shr@devkernel.io> Cc: Tejun Heo <tj@kernel.org> Cc: Xin Hao <xhao@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 03:01:53 +00:00
list_cut_before(&folios, from, &folio2->lru);
else
list_splice_init(from, &folios);
if (mode == MIGRATE_ASYNC)
rc = migrate_pages_batch(&folios, get_new_folio, put_new_folio,
private, mode, reason, &ret_folios,
&split_folios, &stats,
NR_MAX_MIGRATE_PAGES_RETRY);
else
rc = migrate_pages_sync(&folios, get_new_folio, put_new_folio,
private, mode, reason, &ret_folios,
&split_folios, &stats);
list_splice_tail_init(&folios, &ret_folios);
if (rc < 0) {
rc_gather = rc;
list_splice_tail(&split_folios, &ret_folios);
goto out;
}
if (!list_empty(&split_folios)) {
/*
* Failure isn't counted since all split folios of a large folio
* is counted as 1 failure already. And, we only try to migrate
* with minimal effort, force MIGRATE_ASYNC mode and retry once.
*/
migrate_pages_batch(&split_folios, get_new_folio,
put_new_folio, private, MIGRATE_ASYNC, reason,
&ret_folios, NULL, &stats, 1);
list_splice_tail_init(&split_folios, &ret_folios);
}
rc_gather += rc;
if (!list_empty(from))
goto again;
out:
2020-12-15 03:13:06 +00:00
/*
* Put the permanent failure folio back to migration list, they
2020-12-15 03:13:06 +00:00
* will be put back to the right list by the caller.
*/
list_splice(&ret_folios, from);
2020-12-15 03:13:06 +00:00
/*
* Return 0 in case all split folios of fail-to-migrate large folios
* are migrated successfully.
*/
if (list_empty(from))
rc_gather = 0;
migrate_pages: organize stats with struct migrate_pages_stats Patch series "migrate_pages(): batch TLB flushing", v5. Now, migrate_pages() migrates folios one by one, like the fake code as follows, for each folio unmap flush TLB copy restore map If multiple folios are passed to migrate_pages(), there are opportunities to batch the TLB flushing and copying. That is, we can change the code to something as follows, for each folio unmap for each folio flush TLB for each folio copy for each folio restore map The total number of TLB flushing IPI can be reduced considerably. And we may use some hardware accelerator such as DSA to accelerate the folio copying. So in this patch, we refactor the migrate_pages() implementation and implement the TLB flushing batching. Base on this, hardware accelerated folio copying can be implemented. If too many folios are passed to migrate_pages(), in the naive batched implementation, we may unmap too many folios at the same time. The possibility for a task to wait for the migrated folios to be mapped again increases. So the latency may be hurt. To deal with this issue, the max number of folios be unmapped in batch is restricted to no more than HPAGE_PMD_NR in the unit of page. That is, the influence is at the same level of THP migration. We use the following test to measure the performance impact of the patchset, On a 2-socket Intel server, - Run pmbench memory accessing benchmark - Run `migratepages` to migrate pages of pmbench between node 0 and node 1 back and forth. With the patch, the TLB flushing IPI reduces 99.1% during the test and the number of pages migrated successfully per second increases 291.7%. Xin Hao helped to test the patchset on an ARM64 server with 128 cores, 2 NUMA nodes. Test results show that the page migration performance increases up to 78%. This patch (of 9): Define struct migrate_pages_stats to organize the various statistics in migrate_pages(). This makes it easier to collect and consume the statistics in multiple functions. This will be needed in the following patches in the series. Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Bharata B Rao <bharata@amd.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 12:34:36 +00:00
count_vm_events(PGMIGRATE_SUCCESS, stats.nr_succeeded);
count_vm_events(PGMIGRATE_FAIL, stats.nr_failed_pages);
count_vm_events(THP_MIGRATION_SUCCESS, stats.nr_thp_succeeded);
count_vm_events(THP_MIGRATION_FAIL, stats.nr_thp_failed);
count_vm_events(THP_MIGRATION_SPLIT, stats.nr_thp_split);
trace_mm_migrate_pages(stats.nr_succeeded, stats.nr_failed_pages,
stats.nr_thp_succeeded, stats.nr_thp_failed,
stats.nr_thp_split, stats.nr_split, mode,
reason);
if (ret_succeeded)
migrate_pages: organize stats with struct migrate_pages_stats Patch series "migrate_pages(): batch TLB flushing", v5. Now, migrate_pages() migrates folios one by one, like the fake code as follows, for each folio unmap flush TLB copy restore map If multiple folios are passed to migrate_pages(), there are opportunities to batch the TLB flushing and copying. That is, we can change the code to something as follows, for each folio unmap for each folio flush TLB for each folio copy for each folio restore map The total number of TLB flushing IPI can be reduced considerably. And we may use some hardware accelerator such as DSA to accelerate the folio copying. So in this patch, we refactor the migrate_pages() implementation and implement the TLB flushing batching. Base on this, hardware accelerated folio copying can be implemented. If too many folios are passed to migrate_pages(), in the naive batched implementation, we may unmap too many folios at the same time. The possibility for a task to wait for the migrated folios to be mapped again increases. So the latency may be hurt. To deal with this issue, the max number of folios be unmapped in batch is restricted to no more than HPAGE_PMD_NR in the unit of page. That is, the influence is at the same level of THP migration. We use the following test to measure the performance impact of the patchset, On a 2-socket Intel server, - Run pmbench memory accessing benchmark - Run `migratepages` to migrate pages of pmbench between node 0 and node 1 back and forth. With the patch, the TLB flushing IPI reduces 99.1% during the test and the number of pages migrated successfully per second increases 291.7%. Xin Hao helped to test the patchset on an ARM64 server with 128 cores, 2 NUMA nodes. Test results show that the page migration performance increases up to 78%. This patch (of 9): Define struct migrate_pages_stats to organize the various statistics in migrate_pages(). This makes it easier to collect and consume the statistics in multiple functions. This will be needed in the following patches in the series. Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Bharata B Rao <bharata@amd.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 12:34:36 +00:00
*ret_succeeded = stats.nr_succeeded;
return rc_gather;
}
struct folio *alloc_migration_target(struct folio *src, unsigned long private)
{
mm/migrate: introduce a standard migration target allocation function There are some similar functions for migration target allocation. Since there is no fundamental difference, it's better to keep just one rather than keeping all variants. This patch implements base migration target allocation function. In the following patches, variants will be converted to use this function. Changes should be mechanical, but, unfortunately, there are some differences. First, some callers' nodemask is assgined to NULL since NULL nodemask will be considered as all available nodes, that is, &node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if user provided gfp_mask has it. This is because future caller of this function requires to set this node constaint. Lastly, if provided nodeid is NUMA_NO_NODE, nodeid is set up to the node where migration source lives. It helps to remove simple wrappers for setting up the nodeid. Note that PageHighmem() call in previous function is changed to open-code "is_highmem_idx()" since it provides more readability. [akpm@linux-foundation.org: tweak patch title, per Vlastimil] [akpm@linux-foundation.org: fix typo in comment] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Roman Gushchin <guro@fb.com> Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:25 +00:00
struct migration_target_control *mtc;
gfp_t gfp_mask;
unsigned int order = 0;
mm/migrate: introduce a standard migration target allocation function There are some similar functions for migration target allocation. Since there is no fundamental difference, it's better to keep just one rather than keeping all variants. This patch implements base migration target allocation function. In the following patches, variants will be converted to use this function. Changes should be mechanical, but, unfortunately, there are some differences. First, some callers' nodemask is assgined to NULL since NULL nodemask will be considered as all available nodes, that is, &node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if user provided gfp_mask has it. This is because future caller of this function requires to set this node constaint. Lastly, if provided nodeid is NUMA_NO_NODE, nodeid is set up to the node where migration source lives. It helps to remove simple wrappers for setting up the nodeid. Note that PageHighmem() call in previous function is changed to open-code "is_highmem_idx()" since it provides more readability. [akpm@linux-foundation.org: tweak patch title, per Vlastimil] [akpm@linux-foundation.org: fix typo in comment] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Roman Gushchin <guro@fb.com> Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:25 +00:00
int nid;
int zidx;
mtc = (struct migration_target_control *)private;
gfp_mask = mtc->gfp_mask;
nid = mtc->nid;
if (nid == NUMA_NO_NODE)
nid = folio_nid(src);
if (folio_test_hugetlb(src)) {
struct hstate *h = folio_hstate(src);
mm/migrate: introduce a standard migration target allocation function There are some similar functions for migration target allocation. Since there is no fundamental difference, it's better to keep just one rather than keeping all variants. This patch implements base migration target allocation function. In the following patches, variants will be converted to use this function. Changes should be mechanical, but, unfortunately, there are some differences. First, some callers' nodemask is assgined to NULL since NULL nodemask will be considered as all available nodes, that is, &node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if user provided gfp_mask has it. This is because future caller of this function requires to set this node constaint. Lastly, if provided nodeid is NUMA_NO_NODE, nodeid is set up to the node where migration source lives. It helps to remove simple wrappers for setting up the nodeid. Note that PageHighmem() call in previous function is changed to open-code "is_highmem_idx()" since it provides more readability. [akpm@linux-foundation.org: tweak patch title, per Vlastimil] [akpm@linux-foundation.org: fix typo in comment] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Roman Gushchin <guro@fb.com> Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:25 +00:00
gfp_mask = htlb_modify_alloc_mask(h, gfp_mask);
return alloc_hugetlb_folio_nodemask(h, nid,
mm: hugetlb: make the hugetlb migration strategy consistent As discussed in previous thread [1], there is an inconsistency when handing hugetlb migration. When handling the migration of freed hugetlb, it prevents fallback to other NUMA nodes in alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use hugetlb, it allows fallback to other NUMA nodes in alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool and might result in unexpected failures when node bound workloads doesn't get what is asssumed available. To make hugetlb migration strategy more clear, we should list all the scenarios of hugetlb migration and analyze whether allocation fallback is permitted: 1) Memory offline: will call dissolve_free_huge_pages() to free the freed hugetlb, and call do_migrate_range() to migrate the in-use hugetlb. Both can break the per-node hugetlb pool, but as this is an explicit offlining operation, no better choice. So should allow the hugetlb allocation fallback. 2) Memory failure: same as memory offline. Should allow fallback to a different node might be the only option to handle it, otherwise the impact of poisoned memory can be amplified. 3) Longterm pinning: will call migrate_longterm_unpinnable_pages() to migrate in-use and not-longterm-pinnable hugetlb, which can break the per-node pool. But we should fail to longterm pinning if can not allocate on current node to avoid breaking the per-node pool. 4) Syscalls (mbind, migrate_pages, move_pages): these are explicit users operation to move pages to other nodes, so fallback to other nodes should not be prohibited. 5) alloc_contig_range: used by CMA allocation and virtio-mem fake-offline to allocate given range of pages. Now the freed hugetlb migration is not allowed to fallback, to keep consistency, the in-use hugetlb migration should be also not allowed to fallback. 6) alloc_contig_pages: used by kfence, pgtable_debug etc. The strategy should be consistent with that of alloc_contig_range(). Based on the analysis of the various scenarios above, introducing a new helper to determine whether fallback is permitted according to the migration reason.. [1] https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/ Link: https://lkml.kernel.org/r/3519fcd41522817307a05b40fb551e2e17e68101.1709719720.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: David Hildenbrand <david@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-06 10:13:27 +00:00
mtc->nmask, gfp_mask,
htlb_allow_alloc_fallback(mtc->reason));
}
if (folio_test_large(src)) {
/*
* clear __GFP_RECLAIM to make the migration callback
* consistent with regular THP allocations.
*/
gfp_mask &= ~__GFP_RECLAIM;
gfp_mask |= GFP_TRANSHUGE;
order = folio_order(src);
}
zidx = zone_idx(folio_zone(src));
mm/migrate: introduce a standard migration target allocation function There are some similar functions for migration target allocation. Since there is no fundamental difference, it's better to keep just one rather than keeping all variants. This patch implements base migration target allocation function. In the following patches, variants will be converted to use this function. Changes should be mechanical, but, unfortunately, there are some differences. First, some callers' nodemask is assgined to NULL since NULL nodemask will be considered as all available nodes, that is, &node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if user provided gfp_mask has it. This is because future caller of this function requires to set this node constaint. Lastly, if provided nodeid is NUMA_NO_NODE, nodeid is set up to the node where migration source lives. It helps to remove simple wrappers for setting up the nodeid. Note that PageHighmem() call in previous function is changed to open-code "is_highmem_idx()" since it provides more readability. [akpm@linux-foundation.org: tweak patch title, per Vlastimil] [akpm@linux-foundation.org: fix typo in comment] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Roman Gushchin <guro@fb.com> Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 01:37:25 +00:00
if (is_highmem_idx(zidx) || zidx == ZONE_MOVABLE)
gfp_mask |= __GFP_HIGHMEM;
return __folio_alloc(gfp_mask, order, nid, mtc->nmask);
}
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
#ifdef CONFIG_NUMA
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
static int store_status(int __user *status, int start, int value, int nr)
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
{
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
while (nr-- > 0) {
if (put_user(value, status + start))
return -EFAULT;
start++;
}
return 0;
}
static int do_move_pages_to_node(struct list_head *pagelist, int node)
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
{
int err;
struct migration_target_control mtc = {
.nid = node,
.gfp_mask = GFP_HIGHUSER_MOVABLE | __GFP_THISNODE,
mm: record the migration reason for struct migration_target_control Patch series "make the hugetlb migration strategy consistent", v2. As discussed in previous thread [1], there is an inconsistency when handling hugetlb migration. When handling the migration of freed hugetlb, it prevents fallback to other NUMA nodes in alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use hugetlb, it allows fallback to other NUMA nodes in alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool and might result in unexpected failures when node bound workloads doesn't get what is asssumed available. This patchset tries to make the hugetlb migration strategy more clear and consistent. Please find details in each patch. [1] https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/ This patch (of 2): To support different hugetlb allocation strategies during hugetlb migration based on various migration reasons, record the migration reason in the migration_target_control structure as a preparation. Link: https://lkml.kernel.org/r/cover.1709719720.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/7b95d4981e07211f57139fc5b1f7ce91b920cee4.1709719720.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-06 10:13:26 +00:00
.reason = MR_SYSCALL,
};
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
err = migrate_pages(pagelist, alloc_migration_target, NULL,
(unsigned long)&mtc, MIGRATE_SYNC, MR_SYSCALL, NULL);
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
if (err)
putback_movable_pages(pagelist);
return err;
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
}
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference when we won't even be trying to migrate the folio and to get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. We now perform the folio_likely_mapped_shared() check under PTL, which is what we want: relying on the mapcount and friends after dropping the PTL does not make too much sense, as the page can get unmapped concurrently from this process. Further, we perform the folio isolation under PTL, similar to how we handle it for MADV_PAGEOUT. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). The other errros are left as is, and match the documentation in the man page. While at it, rename add_page_for_migration() to add_folio_for_migration(). We'll lose the "secretmem" check, but that shouldn't really matter because these folios cannot ever be migrated. Should vma_migratable() refuse these VMAs? Maybe. Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:17 +00:00
static int __add_folio_for_migration(struct folio *folio, int node,
struct list_head *pagelist, bool migrate_all)
{
if (is_zero_folio(folio) || is_huge_zero_folio(folio))
return -EFAULT;
if (folio_is_zone_device(folio))
return -ENOENT;
if (folio_nid(folio) == node)
return 0;
if (folio_likely_mapped_shared(folio) && !migrate_all)
return -EACCES;
if (folio_test_hugetlb(folio)) {
if (isolate_hugetlb(folio, pagelist))
return 1;
} else if (folio_isolate_lru(folio)) {
list_add_tail(&folio->lru, pagelist);
node_stat_mod_folio(folio,
NR_ISOLATED_ANON + folio_is_file_lru(folio),
folio_nr_pages(folio));
return 1;
}
return -EBUSY;
}
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
/*
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference when we won't even be trying to migrate the folio and to get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. We now perform the folio_likely_mapped_shared() check under PTL, which is what we want: relying on the mapcount and friends after dropping the PTL does not make too much sense, as the page can get unmapped concurrently from this process. Further, we perform the folio isolation under PTL, similar to how we handle it for MADV_PAGEOUT. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). The other errros are left as is, and match the documentation in the man page. While at it, rename add_page_for_migration() to add_folio_for_migration(). We'll lose the "secretmem" check, but that shouldn't really matter because these folios cannot ever be migrated. Should vma_migratable() refuse these VMAs? Maybe. Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:17 +00:00
* Resolves the given address to a struct folio, isolates it from the LRU and
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
* puts it to the given pagelist.
mm: move_pages: return valid node id in status if the page is already on the target node Felix Abecassis reports move_pages() would return random status if the pages are already on the target node by the below test program: int main(void) { const long node_id = 1; const long page_size = sysconf(_SC_PAGESIZE); const int64_t num_pages = 8; unsigned long nodemask = 1 << node_id; long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask)); if (ret < 0) return (EXIT_FAILURE); void **pages = malloc(sizeof(void*) * num_pages); for (int i = 0; i < num_pages; ++i) { pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ, MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS, -1, 0); if (pages[i] == MAP_FAILED) return (EXIT_FAILURE); } ret = set_mempolicy(MPOL_DEFAULT, NULL, 0); if (ret < 0) return (EXIT_FAILURE); int *nodes = malloc(sizeof(int) * num_pages); int *status = malloc(sizeof(int) * num_pages); for (int i = 0; i < num_pages; ++i) { nodes[i] = node_id; status[i] = 0xd0; /* simulate garbage values */ } ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE); printf("move_pages: %ld\n", ret); for (int i = 0; i < num_pages; ++i) printf("status[%d] = %d\n", i, status[i]); } Then running the program would return nonsense status values: $ ./move_pages_bug move_pages: 0 status[0] = 208 status[1] = 208 status[2] = 208 status[3] = 208 status[4] = 208 status[5] = 208 status[6] = 208 status[7] = 208 This is because the status is not set if the page is already on the target node, but move_pages() should return valid status as long as it succeeds. The valid status may be errno or node id. We can't simply initialize status array to zero since the pages may be not on node 0. Fix it by updating status with node id which the page is already on. Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reported-by: Felix Abecassis <fabecassis@nvidia.com> Tested-by: Felix Abecassis <fabecassis@nvidia.com> Suggested-by: Michal Hocko <mhocko@suse.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-04 20:59:46 +00:00
* Returns:
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference when we won't even be trying to migrate the folio and to get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. We now perform the folio_likely_mapped_shared() check under PTL, which is what we want: relying on the mapcount and friends after dropping the PTL does not make too much sense, as the page can get unmapped concurrently from this process. Further, we perform the folio isolation under PTL, similar to how we handle it for MADV_PAGEOUT. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). The other errros are left as is, and match the documentation in the man page. While at it, rename add_page_for_migration() to add_folio_for_migration(). We'll lose the "secretmem" check, but that shouldn't really matter because these folios cannot ever be migrated. Should vma_migratable() refuse these VMAs? Maybe. Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:17 +00:00
* errno - if the folio cannot be found/isolated
mm: move_pages: return valid node id in status if the page is already on the target node Felix Abecassis reports move_pages() would return random status if the pages are already on the target node by the below test program: int main(void) { const long node_id = 1; const long page_size = sysconf(_SC_PAGESIZE); const int64_t num_pages = 8; unsigned long nodemask = 1 << node_id; long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask)); if (ret < 0) return (EXIT_FAILURE); void **pages = malloc(sizeof(void*) * num_pages); for (int i = 0; i < num_pages; ++i) { pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ, MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS, -1, 0); if (pages[i] == MAP_FAILED) return (EXIT_FAILURE); } ret = set_mempolicy(MPOL_DEFAULT, NULL, 0); if (ret < 0) return (EXIT_FAILURE); int *nodes = malloc(sizeof(int) * num_pages); int *status = malloc(sizeof(int) * num_pages); for (int i = 0; i < num_pages; ++i) { nodes[i] = node_id; status[i] = 0xd0; /* simulate garbage values */ } ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE); printf("move_pages: %ld\n", ret); for (int i = 0; i < num_pages; ++i) printf("status[%d] = %d\n", i, status[i]); } Then running the program would return nonsense status values: $ ./move_pages_bug move_pages: 0 status[0] = 208 status[1] = 208 status[2] = 208 status[3] = 208 status[4] = 208 status[5] = 208 status[6] = 208 status[7] = 208 This is because the status is not set if the page is already on the target node, but move_pages() should return valid status as long as it succeeds. The valid status may be errno or node id. We can't simply initialize status array to zero since the pages may be not on node 0. Fix it by updating status with node id which the page is already on. Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reported-by: Felix Abecassis <fabecassis@nvidia.com> Tested-by: Felix Abecassis <fabecassis@nvidia.com> Suggested-by: Michal Hocko <mhocko@suse.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-04 20:59:46 +00:00
* 0 - when it doesn't have to be migrated because it is already on the
* target node
* 1 - when it has been queued
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
*/
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference when we won't even be trying to migrate the folio and to get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. We now perform the folio_likely_mapped_shared() check under PTL, which is what we want: relying on the mapcount and friends after dropping the PTL does not make too much sense, as the page can get unmapped concurrently from this process. Further, we perform the folio isolation under PTL, similar to how we handle it for MADV_PAGEOUT. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). The other errros are left as is, and match the documentation in the man page. While at it, rename add_page_for_migration() to add_folio_for_migration(). We'll lose the "secretmem" check, but that shouldn't really matter because these folios cannot ever be migrated. Should vma_migratable() refuse these VMAs? Maybe. Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:17 +00:00
static int add_folio_for_migration(struct mm_struct *mm, const void __user *p,
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
int node, struct list_head *pagelist, bool migrate_all)
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
{
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
struct vm_area_struct *vma;
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference when we won't even be trying to migrate the folio and to get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. We now perform the folio_likely_mapped_shared() check under PTL, which is what we want: relying on the mapcount and friends after dropping the PTL does not make too much sense, as the page can get unmapped concurrently from this process. Further, we perform the folio isolation under PTL, similar to how we handle it for MADV_PAGEOUT. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). The other errros are left as is, and match the documentation in the man page. While at it, rename add_page_for_migration() to add_folio_for_migration(). We'll lose the "secretmem" check, but that shouldn't really matter because these folios cannot ever be migrated. Should vma_migratable() refuse these VMAs? Maybe. Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:17 +00:00
struct folio_walk fw;
struct folio *folio;
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference when we won't even be trying to migrate the folio and to get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. We now perform the folio_likely_mapped_shared() check under PTL, which is what we want: relying on the mapcount and friends after dropping the PTL does not make too much sense, as the page can get unmapped concurrently from this process. Further, we perform the folio isolation under PTL, similar to how we handle it for MADV_PAGEOUT. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). The other errros are left as is, and match the documentation in the man page. While at it, rename add_page_for_migration() to add_folio_for_migration(). We'll lose the "secretmem" check, but that shouldn't really matter because these folios cannot ever be migrated. Should vma_migratable() refuse these VMAs? Maybe. Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:17 +00:00
unsigned long addr;
int err = -EFAULT;
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_read_lock(mm);
addr = (unsigned long)untagged_addr_remote(mm, p);
vma = vma_lookup(mm, addr);
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference when we won't even be trying to migrate the folio and to get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. We now perform the folio_likely_mapped_shared() check under PTL, which is what we want: relying on the mapcount and friends after dropping the PTL does not make too much sense, as the page can get unmapped concurrently from this process. Further, we perform the folio isolation under PTL, similar to how we handle it for MADV_PAGEOUT. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). The other errros are left as is, and match the documentation in the man page. While at it, rename add_page_for_migration() to add_folio_for_migration(). We'll lose the "secretmem" check, but that shouldn't really matter because these folios cannot ever be migrated. Should vma_migratable() refuse these VMAs? Maybe. Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:17 +00:00
if (vma && vma_migratable(vma)) {
folio = folio_walk_start(&fw, vma, addr, FW_ZEROPAGE);
if (folio) {
err = __add_folio_for_migration(folio, node, pagelist,
migrate_all);
folio_walk_end(&fw, vma);
} else {
err = -ENOENT;
}
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
}
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_read_unlock(mm);
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
return err;
}
static int move_pages_and_store_status(int node,
struct list_head *pagelist, int __user *status,
int start, int i, unsigned long nr_pages)
{
int err;
if (list_empty(pagelist))
return 0;
err = do_move_pages_to_node(pagelist, node);
if (err) {
/*
* Positive err means the number of failed
* pages to migrate. Since we are going to
* abort and return the number of non-migrated
* pages, so need to include the rest of the
* nr_pages that have not been attempted as
* well.
*/
if (err > 0)
migrate: fix syscall move_pages() return value for failure Patch series "migrate_pages(): fix several bugs in error path", v3. During review the code of migrate_pages() and build a test program for it. Several bugs in error path are identified and fixed in this series. Most patches are tested via - Apply error-inject.patch in Linux kernel - Compile test-migrate.c (with -lnuma) - Test with test-migrate.sh error-inject.patch, test-migrate.c, and test-migrate.sh are as below. It turns out that error injection is an important tool to fix bugs in error path. This patch (of 8): The return value of move_pages() syscall is incorrect when counting the remaining pages to be migrated. For example, for the following test program, " #define _GNU_SOURCE #include <stdbool.h> #include <stdio.h> #include <string.h> #include <stdlib.h> #include <errno.h> #include <fcntl.h> #include <sys/uio.h> #include <sys/mman.h> #include <sys/types.h> #include <unistd.h> #include <numaif.h> #include <numa.h> #ifndef MADV_FREE #define MADV_FREE 8 /* free pages only if memory pressure */ #endif #define ONE_MB (1024 * 1024) #define MAP_SIZE (16 * ONE_MB) #define THP_SIZE (2 * ONE_MB) #define THP_MASK (THP_SIZE - 1) #define ERR_EXIT_ON(cond, msg) \ do { \ int __cond_in_macro = (cond); \ if (__cond_in_macro) \ error_exit(__cond_in_macro, (msg)); \ } while (0) void error_msg(int ret, int nr, int *status, const char *msg) { int i; fprintf(stderr, "Error: %s, ret : %d, error: %s\n", msg, ret, strerror(errno)); if (!nr) return; fprintf(stderr, "status: "); for (i = 0; i < nr; i++) fprintf(stderr, "%d ", status[i]); fprintf(stderr, "\n"); } void error_exit(int ret, const char *msg) { error_msg(ret, 0, NULL, msg); exit(1); } int page_size; bool do_vmsplice; bool do_thp; static int pipe_fds[2]; void *addr; char *pn; char *pn1; void *pages[2]; int status[2]; void prepare() { int ret; struct iovec iov; if (addr) { munmap(addr, MAP_SIZE); close(pipe_fds[0]); close(pipe_fds[1]); } ret = pipe(pipe_fds); ERR_EXIT_ON(ret, "pipe"); addr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); ERR_EXIT_ON(addr == MAP_FAILED, "mmap"); if (do_thp) { ret = madvise(addr, MAP_SIZE, MADV_HUGEPAGE); ERR_EXIT_ON(ret, "advise hugepage"); } pn = (char *)(((unsigned long)addr + THP_SIZE) & ~THP_MASK); pn1 = pn + THP_SIZE; pages[0] = pn; pages[1] = pn1; *pn = 1; if (do_vmsplice) { iov.iov_base = pn; iov.iov_len = page_size; ret = vmsplice(pipe_fds[1], &iov, 1, 0); ERR_EXIT_ON(ret < 0, "vmsplice"); } status[0] = status[1] = 1024; } void test_migrate() { int ret; int nodes[2] = { 1, 1 }; pid_t pid = getpid(); prepare(); ret = move_pages(pid, 1, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 1, status, "move 1 page"); prepare(); ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 2, status, "move 2 pages, page 1 not mapped"); prepare(); *pn1 = 1; ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 2, status, "move 2 pages"); prepare(); *pn1 = 1; nodes[1] = 0; ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 2, status, "move 2 pages, page 1 to node 0"); } int main(int argc, char *argv[]) { numa_run_on_node(0); page_size = getpagesize(); test_migrate(); fprintf(stderr, "\nMake page 0 cannot be migrated:\n"); do_vmsplice = true; test_migrate(); fprintf(stderr, "\nTest THP:\n"); do_thp = true; do_vmsplice = false; test_migrate(); fprintf(stderr, "\nTHP: make page 0 cannot be migrated:\n"); do_vmsplice = true; test_migrate(); return 0; } " The output of the current kernel is, " Error: move 1 page, ret : 0, error: Success status: 1 Error: move 2 pages, page 1 not mapped, ret : 0, error: Success status: 1 -14 Error: move 2 pages, ret : 0, error: Success status: 1 1 Error: move 2 pages, page 1 to node 0, ret : 0, error: Success status: 1 0 Make page 0 cannot be migrated: Error: move 1 page, ret : 0, error: Success status: 1024 Error: move 2 pages, page 1 not mapped, ret : 1, error: Success status: 1024 -14 Error: move 2 pages, ret : 0, error: Success status: 1024 1024 Error: move 2 pages, page 1 to node 0, ret : 1, error: Success status: 1024 1024 " While the expected output is, " Error: move 1 page, ret : 0, error: Success status: 1 Error: move 2 pages, page 1 not mapped, ret : 0, error: Success status: 1 -14 Error: move 2 pages, ret : 0, error: Success status: 1 1 Error: move 2 pages, page 1 to node 0, ret : 0, error: Success status: 1 0 Make page 0 cannot be migrated: Error: move 1 page, ret : 1, error: Success status: 1024 Error: move 2 pages, page 1 not mapped, ret : 1, error: Success status: 1024 -14 Error: move 2 pages, ret : 1, error: Success status: 1024 1024 Error: move 2 pages, page 1 to node 0, ret : 2, error: Success status: 1024 1024 " Fix this via correcting the remaining pages counting. With the fix, the output for the test program as above is expected. Link: https://lkml.kernel.org/r/20220817081408.513338-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220817081408.513338-2-ying.huang@intel.com Fixes: 5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-17 08:14:01 +00:00
err += nr_pages - i;
return err;
}
return store_status(status, start, node, i - start);
}
/*
* Migrate an array of page address onto an array of nodes and fill
* the corresponding array of status.
*/
mm: fix move/migrate_pages() race on task struct Migration functions perform the rcu_read_unlock too early. As a result the task pointed to may change from under us. This can result in an oops, as reported by Dave Hansen in https://lkml.org/lkml/2012/2/23/302. The following patch extend the period of the rcu_read_lock until after the permissions checks are done. We also take a refcount so that the task reference is stable when calling security check functions and performing cpuset node validation (which takes a mutex). The refcount is dropped before actual page migration occurs so there is no change to the refcounts held during page migration. Also move the determination of the mm of the task struct to immediately before the do_migrate*() calls so that it is clear that we switch from handling the task during permission checks to the mm for the actual migration. Since the determination is only done once and we then no longer use the task_struct we can be sure that we operate on a specific address space that will not change from under us. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Christoph Lameter <cl@linux.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Reported-by: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:06 +00:00
static int do_pages_move(struct mm_struct *mm, nodemask_t task_nodes,
unsigned long nr_pages,
const void __user * __user *pages,
const int __user *nodes,
int __user *status, int flags)
{
mm/migrate: fix do_pages_move for compat pointers do_pages_move does not handle compat pointers for the page list. correctly. Add in_compat_syscall check and appropriate get_user fetch when iterating the page list. It makes the syscall in compat mode (32-bit userspace, 64-bit kernel) work the same way as the native 32-bit syscall again, restoring the behavior before my broken commit 5b1b561ba73c ("mm: simplify compat_sys_move_pages"). More specifically, my patch moved the parsing of the 'pages' array from the main entry point into do_pages_stat(), which left the syscall working correctly for the 'stat' operation (nodes = NULL), while the 'move' operation (nodes != NULL) is now missing the conversion and interprets 'pages' as an array of 64-bit pointers instead of the intended 32-bit userspace pointers. It is possible that nobody noticed this bug because the few applications that actually call move_pages are unlikely to run in compat mode because of their large memory requirements, but this clearly fixes a user-visible regression and should have been caught by ltp. Link: https://lkml.kernel.org/r/20231003144857.752952-1-gregory.price@memverge.com Fixes: 5b1b561ba73c ("mm: simplify compat_sys_move_pages") Signed-off-by: Gregory Price <gregory.price@memverge.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Co-developed-by: Arnd Bergmann <arnd@arndb.de> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-03 14:48:56 +00:00
compat_uptr_t __user *compat_pages = (void __user *)pages;
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
int current_node = NUMA_NO_NODE;
LIST_HEAD(pagelist);
int start, i;
int err = 0, err1;
lru_cache_disable();
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
for (i = start = 0; i < nr_pages; i++) {
const void __user *p;
int node;
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
err = -EFAULT;
mm/migrate: fix do_pages_move for compat pointers do_pages_move does not handle compat pointers for the page list. correctly. Add in_compat_syscall check and appropriate get_user fetch when iterating the page list. It makes the syscall in compat mode (32-bit userspace, 64-bit kernel) work the same way as the native 32-bit syscall again, restoring the behavior before my broken commit 5b1b561ba73c ("mm: simplify compat_sys_move_pages"). More specifically, my patch moved the parsing of the 'pages' array from the main entry point into do_pages_stat(), which left the syscall working correctly for the 'stat' operation (nodes = NULL), while the 'move' operation (nodes != NULL) is now missing the conversion and interprets 'pages' as an array of 64-bit pointers instead of the intended 32-bit userspace pointers. It is possible that nobody noticed this bug because the few applications that actually call move_pages are unlikely to run in compat mode because of their large memory requirements, but this clearly fixes a user-visible regression and should have been caught by ltp. Link: https://lkml.kernel.org/r/20231003144857.752952-1-gregory.price@memverge.com Fixes: 5b1b561ba73c ("mm: simplify compat_sys_move_pages") Signed-off-by: Gregory Price <gregory.price@memverge.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Co-developed-by: Arnd Bergmann <arnd@arndb.de> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-03 14:48:56 +00:00
if (in_compat_syscall()) {
compat_uptr_t cp;
if (get_user(cp, compat_pages + i))
goto out_flush;
p = compat_ptr(cp);
} else {
if (get_user(p, pages + i))
goto out_flush;
}
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
if (get_user(node, nodes + i))
goto out_flush;
err = -ENODEV;
if (node < 0 || node >= MAX_NUMNODES)
goto out_flush;
if (!node_state(node, N_MEMORY))
goto out_flush;
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
err = -EACCES;
if (!node_isset(node, task_nodes))
goto out_flush;
if (current_node == NUMA_NO_NODE) {
current_node = node;
start = i;
} else if (node != current_node) {
err = move_pages_and_store_status(current_node,
&pagelist, status, start, i, nr_pages);
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
if (err)
goto out;
start = i;
current_node = node;
}
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
/*
* Errors in the page lookup or isolation are not fatal and we simply
* report them via status
*/
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference when we won't even be trying to migrate the folio and to get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. We now perform the folio_likely_mapped_shared() check under PTL, which is what we want: relying on the mapcount and friends after dropping the PTL does not make too much sense, as the page can get unmapped concurrently from this process. Further, we perform the folio isolation under PTL, similar to how we handle it for MADV_PAGEOUT. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). The other errros are left as is, and match the documentation in the man page. While at it, rename add_page_for_migration() to add_folio_for_migration(). We'll lose the "secretmem" check, but that shouldn't really matter because these folios cannot ever be migrated. Should vma_migratable() refuse these VMAs? Maybe. Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:17 +00:00
err = add_folio_for_migration(mm, p, current_node, &pagelist,
flags & MPOL_MF_MOVE_ALL);
mm: move_pages: return valid node id in status if the page is already on the target node Felix Abecassis reports move_pages() would return random status if the pages are already on the target node by the below test program: int main(void) { const long node_id = 1; const long page_size = sysconf(_SC_PAGESIZE); const int64_t num_pages = 8; unsigned long nodemask = 1 << node_id; long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask)); if (ret < 0) return (EXIT_FAILURE); void **pages = malloc(sizeof(void*) * num_pages); for (int i = 0; i < num_pages; ++i) { pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ, MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS, -1, 0); if (pages[i] == MAP_FAILED) return (EXIT_FAILURE); } ret = set_mempolicy(MPOL_DEFAULT, NULL, 0); if (ret < 0) return (EXIT_FAILURE); int *nodes = malloc(sizeof(int) * num_pages); int *status = malloc(sizeof(int) * num_pages); for (int i = 0; i < num_pages; ++i) { nodes[i] = node_id; status[i] = 0xd0; /* simulate garbage values */ } ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE); printf("move_pages: %ld\n", ret); for (int i = 0; i < num_pages; ++i) printf("status[%d] = %d\n", i, status[i]); } Then running the program would return nonsense status values: $ ./move_pages_bug move_pages: 0 status[0] = 208 status[1] = 208 status[2] = 208 status[3] = 208 status[4] = 208 status[5] = 208 status[6] = 208 status[7] = 208 This is because the status is not set if the page is already on the target node, but move_pages() should return valid status as long as it succeeds. The valid status may be errno or node id. We can't simply initialize status array to zero since the pages may be not on node 0. Fix it by updating status with node id which the page is already on. Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reported-by: Felix Abecassis <fabecassis@nvidia.com> Tested-by: Felix Abecassis <fabecassis@nvidia.com> Suggested-by: Michal Hocko <mhocko@suse.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-04 20:59:46 +00:00
if (err > 0) {
mm: move_pages: return valid node id in status if the page is already on the target node Felix Abecassis reports move_pages() would return random status if the pages are already on the target node by the below test program: int main(void) { const long node_id = 1; const long page_size = sysconf(_SC_PAGESIZE); const int64_t num_pages = 8; unsigned long nodemask = 1 << node_id; long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask)); if (ret < 0) return (EXIT_FAILURE); void **pages = malloc(sizeof(void*) * num_pages); for (int i = 0; i < num_pages; ++i) { pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ, MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS, -1, 0); if (pages[i] == MAP_FAILED) return (EXIT_FAILURE); } ret = set_mempolicy(MPOL_DEFAULT, NULL, 0); if (ret < 0) return (EXIT_FAILURE); int *nodes = malloc(sizeof(int) * num_pages); int *status = malloc(sizeof(int) * num_pages); for (int i = 0; i < num_pages; ++i) { nodes[i] = node_id; status[i] = 0xd0; /* simulate garbage values */ } ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE); printf("move_pages: %ld\n", ret); for (int i = 0; i < num_pages; ++i) printf("status[%d] = %d\n", i, status[i]); } Then running the program would return nonsense status values: $ ./move_pages_bug move_pages: 0 status[0] = 208 status[1] = 208 status[2] = 208 status[3] = 208 status[4] = 208 status[5] = 208 status[6] = 208 status[7] = 208 This is because the status is not set if the page is already on the target node, but move_pages() should return valid status as long as it succeeds. The valid status may be errno or node id. We can't simply initialize status array to zero since the pages may be not on node 0. Fix it by updating status with node id which the page is already on. Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reported-by: Felix Abecassis <fabecassis@nvidia.com> Tested-by: Felix Abecassis <fabecassis@nvidia.com> Suggested-by: Michal Hocko <mhocko@suse.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-04 20:59:46 +00:00
/* The page is successfully queued for migration */
continue;
}
/*
* The move_pages() man page does not have an -EEXIST choice, so
* use -EFAULT instead.
*/
if (err == -EEXIST)
err = -EFAULT;
/*
* If the page is already on the target node (!err), store the
* node, otherwise, store the err.
*/
err = store_status(status, i, err ? : current_node, 1);
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
if (err)
goto out_flush;
err = move_pages_and_store_status(current_node, &pagelist,
status, start, i, nr_pages);
migrate: fix syscall move_pages() return value for failure Patch series "migrate_pages(): fix several bugs in error path", v3. During review the code of migrate_pages() and build a test program for it. Several bugs in error path are identified and fixed in this series. Most patches are tested via - Apply error-inject.patch in Linux kernel - Compile test-migrate.c (with -lnuma) - Test with test-migrate.sh error-inject.patch, test-migrate.c, and test-migrate.sh are as below. It turns out that error injection is an important tool to fix bugs in error path. This patch (of 8): The return value of move_pages() syscall is incorrect when counting the remaining pages to be migrated. For example, for the following test program, " #define _GNU_SOURCE #include <stdbool.h> #include <stdio.h> #include <string.h> #include <stdlib.h> #include <errno.h> #include <fcntl.h> #include <sys/uio.h> #include <sys/mman.h> #include <sys/types.h> #include <unistd.h> #include <numaif.h> #include <numa.h> #ifndef MADV_FREE #define MADV_FREE 8 /* free pages only if memory pressure */ #endif #define ONE_MB (1024 * 1024) #define MAP_SIZE (16 * ONE_MB) #define THP_SIZE (2 * ONE_MB) #define THP_MASK (THP_SIZE - 1) #define ERR_EXIT_ON(cond, msg) \ do { \ int __cond_in_macro = (cond); \ if (__cond_in_macro) \ error_exit(__cond_in_macro, (msg)); \ } while (0) void error_msg(int ret, int nr, int *status, const char *msg) { int i; fprintf(stderr, "Error: %s, ret : %d, error: %s\n", msg, ret, strerror(errno)); if (!nr) return; fprintf(stderr, "status: "); for (i = 0; i < nr; i++) fprintf(stderr, "%d ", status[i]); fprintf(stderr, "\n"); } void error_exit(int ret, const char *msg) { error_msg(ret, 0, NULL, msg); exit(1); } int page_size; bool do_vmsplice; bool do_thp; static int pipe_fds[2]; void *addr; char *pn; char *pn1; void *pages[2]; int status[2]; void prepare() { int ret; struct iovec iov; if (addr) { munmap(addr, MAP_SIZE); close(pipe_fds[0]); close(pipe_fds[1]); } ret = pipe(pipe_fds); ERR_EXIT_ON(ret, "pipe"); addr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); ERR_EXIT_ON(addr == MAP_FAILED, "mmap"); if (do_thp) { ret = madvise(addr, MAP_SIZE, MADV_HUGEPAGE); ERR_EXIT_ON(ret, "advise hugepage"); } pn = (char *)(((unsigned long)addr + THP_SIZE) & ~THP_MASK); pn1 = pn + THP_SIZE; pages[0] = pn; pages[1] = pn1; *pn = 1; if (do_vmsplice) { iov.iov_base = pn; iov.iov_len = page_size; ret = vmsplice(pipe_fds[1], &iov, 1, 0); ERR_EXIT_ON(ret < 0, "vmsplice"); } status[0] = status[1] = 1024; } void test_migrate() { int ret; int nodes[2] = { 1, 1 }; pid_t pid = getpid(); prepare(); ret = move_pages(pid, 1, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 1, status, "move 1 page"); prepare(); ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 2, status, "move 2 pages, page 1 not mapped"); prepare(); *pn1 = 1; ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 2, status, "move 2 pages"); prepare(); *pn1 = 1; nodes[1] = 0; ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 2, status, "move 2 pages, page 1 to node 0"); } int main(int argc, char *argv[]) { numa_run_on_node(0); page_size = getpagesize(); test_migrate(); fprintf(stderr, "\nMake page 0 cannot be migrated:\n"); do_vmsplice = true; test_migrate(); fprintf(stderr, "\nTest THP:\n"); do_thp = true; do_vmsplice = false; test_migrate(); fprintf(stderr, "\nTHP: make page 0 cannot be migrated:\n"); do_vmsplice = true; test_migrate(); return 0; } " The output of the current kernel is, " Error: move 1 page, ret : 0, error: Success status: 1 Error: move 2 pages, page 1 not mapped, ret : 0, error: Success status: 1 -14 Error: move 2 pages, ret : 0, error: Success status: 1 1 Error: move 2 pages, page 1 to node 0, ret : 0, error: Success status: 1 0 Make page 0 cannot be migrated: Error: move 1 page, ret : 0, error: Success status: 1024 Error: move 2 pages, page 1 not mapped, ret : 1, error: Success status: 1024 -14 Error: move 2 pages, ret : 0, error: Success status: 1024 1024 Error: move 2 pages, page 1 to node 0, ret : 1, error: Success status: 1024 1024 " While the expected output is, " Error: move 1 page, ret : 0, error: Success status: 1 Error: move 2 pages, page 1 not mapped, ret : 0, error: Success status: 1 -14 Error: move 2 pages, ret : 0, error: Success status: 1 1 Error: move 2 pages, page 1 to node 0, ret : 0, error: Success status: 1 0 Make page 0 cannot be migrated: Error: move 1 page, ret : 1, error: Success status: 1024 Error: move 2 pages, page 1 not mapped, ret : 1, error: Success status: 1024 -14 Error: move 2 pages, ret : 1, error: Success status: 1024 1024 Error: move 2 pages, page 1 to node 0, ret : 2, error: Success status: 1024 1024 " Fix this via correcting the remaining pages counting. With the fix, the output for the test program as above is expected. Link: https://lkml.kernel.org/r/20220817081408.513338-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220817081408.513338-2-ying.huang@intel.com Fixes: 5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-17 08:14:01 +00:00
if (err) {
/* We have accounted for page i */
if (err > 0)
err--;
goto out;
migrate: fix syscall move_pages() return value for failure Patch series "migrate_pages(): fix several bugs in error path", v3. During review the code of migrate_pages() and build a test program for it. Several bugs in error path are identified and fixed in this series. Most patches are tested via - Apply error-inject.patch in Linux kernel - Compile test-migrate.c (with -lnuma) - Test with test-migrate.sh error-inject.patch, test-migrate.c, and test-migrate.sh are as below. It turns out that error injection is an important tool to fix bugs in error path. This patch (of 8): The return value of move_pages() syscall is incorrect when counting the remaining pages to be migrated. For example, for the following test program, " #define _GNU_SOURCE #include <stdbool.h> #include <stdio.h> #include <string.h> #include <stdlib.h> #include <errno.h> #include <fcntl.h> #include <sys/uio.h> #include <sys/mman.h> #include <sys/types.h> #include <unistd.h> #include <numaif.h> #include <numa.h> #ifndef MADV_FREE #define MADV_FREE 8 /* free pages only if memory pressure */ #endif #define ONE_MB (1024 * 1024) #define MAP_SIZE (16 * ONE_MB) #define THP_SIZE (2 * ONE_MB) #define THP_MASK (THP_SIZE - 1) #define ERR_EXIT_ON(cond, msg) \ do { \ int __cond_in_macro = (cond); \ if (__cond_in_macro) \ error_exit(__cond_in_macro, (msg)); \ } while (0) void error_msg(int ret, int nr, int *status, const char *msg) { int i; fprintf(stderr, "Error: %s, ret : %d, error: %s\n", msg, ret, strerror(errno)); if (!nr) return; fprintf(stderr, "status: "); for (i = 0; i < nr; i++) fprintf(stderr, "%d ", status[i]); fprintf(stderr, "\n"); } void error_exit(int ret, const char *msg) { error_msg(ret, 0, NULL, msg); exit(1); } int page_size; bool do_vmsplice; bool do_thp; static int pipe_fds[2]; void *addr; char *pn; char *pn1; void *pages[2]; int status[2]; void prepare() { int ret; struct iovec iov; if (addr) { munmap(addr, MAP_SIZE); close(pipe_fds[0]); close(pipe_fds[1]); } ret = pipe(pipe_fds); ERR_EXIT_ON(ret, "pipe"); addr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); ERR_EXIT_ON(addr == MAP_FAILED, "mmap"); if (do_thp) { ret = madvise(addr, MAP_SIZE, MADV_HUGEPAGE); ERR_EXIT_ON(ret, "advise hugepage"); } pn = (char *)(((unsigned long)addr + THP_SIZE) & ~THP_MASK); pn1 = pn + THP_SIZE; pages[0] = pn; pages[1] = pn1; *pn = 1; if (do_vmsplice) { iov.iov_base = pn; iov.iov_len = page_size; ret = vmsplice(pipe_fds[1], &iov, 1, 0); ERR_EXIT_ON(ret < 0, "vmsplice"); } status[0] = status[1] = 1024; } void test_migrate() { int ret; int nodes[2] = { 1, 1 }; pid_t pid = getpid(); prepare(); ret = move_pages(pid, 1, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 1, status, "move 1 page"); prepare(); ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 2, status, "move 2 pages, page 1 not mapped"); prepare(); *pn1 = 1; ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 2, status, "move 2 pages"); prepare(); *pn1 = 1; nodes[1] = 0; ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL); error_msg(ret, 2, status, "move 2 pages, page 1 to node 0"); } int main(int argc, char *argv[]) { numa_run_on_node(0); page_size = getpagesize(); test_migrate(); fprintf(stderr, "\nMake page 0 cannot be migrated:\n"); do_vmsplice = true; test_migrate(); fprintf(stderr, "\nTest THP:\n"); do_thp = true; do_vmsplice = false; test_migrate(); fprintf(stderr, "\nTHP: make page 0 cannot be migrated:\n"); do_vmsplice = true; test_migrate(); return 0; } " The output of the current kernel is, " Error: move 1 page, ret : 0, error: Success status: 1 Error: move 2 pages, page 1 not mapped, ret : 0, error: Success status: 1 -14 Error: move 2 pages, ret : 0, error: Success status: 1 1 Error: move 2 pages, page 1 to node 0, ret : 0, error: Success status: 1 0 Make page 0 cannot be migrated: Error: move 1 page, ret : 0, error: Success status: 1024 Error: move 2 pages, page 1 not mapped, ret : 1, error: Success status: 1024 -14 Error: move 2 pages, ret : 0, error: Success status: 1024 1024 Error: move 2 pages, page 1 to node 0, ret : 1, error: Success status: 1024 1024 " While the expected output is, " Error: move 1 page, ret : 0, error: Success status: 1 Error: move 2 pages, page 1 not mapped, ret : 0, error: Success status: 1 -14 Error: move 2 pages, ret : 0, error: Success status: 1 1 Error: move 2 pages, page 1 to node 0, ret : 0, error: Success status: 1 0 Make page 0 cannot be migrated: Error: move 1 page, ret : 1, error: Success status: 1024 Error: move 2 pages, page 1 not mapped, ret : 1, error: Success status: 1024 -14 Error: move 2 pages, ret : 1, error: Success status: 1024 1024 Error: move 2 pages, page 1 to node 0, ret : 2, error: Success status: 1024 1024 " Fix this via correcting the remaining pages counting. With the fix, the output for the test program as above is expected. Link: https://lkml.kernel.org/r/20220817081408.513338-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220817081408.513338-2-ying.huang@intel.com Fixes: 5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-17 08:14:01 +00:00
}
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
current_node = NUMA_NO_NODE;
}
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
out_flush:
/* Make sure we do not overwrite the existing error */
err1 = move_pages_and_store_status(current_node, &pagelist,
status, start, i, nr_pages);
if (err >= 0)
mm, numa: rework do_pages_move Patch series "unclutter thp migration" Motivation: THP migration is hacked into the generic migration with rather surprising semantic. The migration allocation callback is supposed to check whether the THP can be migrated at once and if that is not the case then it allocates a simple page to migrate. unmap_and_move then fixes that up by splitting the THP into small pages while moving the head page to the newly allocated order-0 page. Remaining pages are moved to the LRU list by split_huge_page. The same happens if the THP allocation fails. This is really ugly and error prone [2]. I also believe that split_huge_page to the LRU lists is inherently wrong because all tail pages are not migrated. Some callers will just work around that by retrying (e.g. memory hotplug). There are other pfn walkers which are simply broken though. e.g. madvise_inject_error will migrate head and then advances next pfn by the huge page size. do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind), will simply split the THP before migration if the THP migration is not supported then falls back to single page migration but it doesn't handle tail pages if the THP migration path is not able to allocate a fresh THP so we end up with ENOMEM and fail the whole migration which is a questionable behavior. Page compaction doesn't try to migrate large pages so it should be immune. The first patch reworks do_pages_move which relies on a very ugly calling semantic when the return status is pushed to the migration path via private pointer. It uses pre allocated fixed size batching to achieve that. We simply cannot do the same if a THP is to be split during the migration path which is done in the patch 3. Patch 2 is follow up cleanup which removes the mentioned return status calling convention ugliness. On a side note: There are some semantic issues I have encountered on the way when working on patch 1 but I am not addressing them here. E.g. trying to move THP tail pages will result in either success or EBUSY (the later one more likely once we isolate head from the LRU list). Hugetlb reports EACCESS on tail pages. Some errors are reported via status parameter but migration failures are not even though the original `reason' argument suggests there was an intention to do so. From a quick look into git history this never worked. I have tried to keep the semantic unchanged. Then there is a relatively minor thing that the page isolation might fail because of pages not being on the LRU - e.g. because they are sitting on the per-cpu LRU caches. Easily fixable. This patch (of 3): do_pages_move is supposed to move user defined memory (an array of addresses) to the user defined numa nodes (an array of nodes one for each address). The user provided status array then contains resulting numa node for each address or an error. The semantic of this function is little bit confusing because only some errors are reported back. Notably migrate_pages error is only reported via the return value. This patch doesn't try to address these semantic nuances but rather change the underlying implementation. Currently we are processing user input (which can be really large) in batches which are stored to a temporarily allocated page. Each address is resolved to its struct page and stored to page_to_node structure along with the requested target numa node. The array of these structures is then conveyed down the page migration path via private argument. new_page_node then finds the corresponding structure and allocates the proper target page. What is the problem with the current implementation and why to change it? Apart from being quite ugly it also doesn't cope with unexpected pages showing up on the migration list inside migrate_pages path. That doesn't happen currently but the follow up patch would like to make the thp migration code more clear and that would need to split a THP into the list for some cases. How does the new implementation work? Well, instead of batching into a fixed size array we simply batch all pages that should be migrated to the same node and isolate all of them into a linked list which doesn't require any additional storage. This should work reasonably well because page migration usually migrates larger ranges of memory to a specific node. So the common case should work equally well as the current implementation. Even if somebody constructs an input where the target numa nodes would be interleaved we shouldn't see a large performance impact because page migration alone doesn't really benefit from batching. mmap_sem batching for the lookup is quite questionable and isolate_lru_page which would benefit from batching is not using it even in the current implementation. Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Reale <ar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:29:59 +00:00
err = err1;
out:
lru_cache_enable();
return err;
}
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
/*
* Determine the nodes of an array of pages and store it in an array of status.
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
*/
static void do_pages_stat_array(struct mm_struct *mm, unsigned long nr_pages,
const void __user **pages, int *status)
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
{
unsigned long i;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_read_lock(mm);
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
for (i = 0; i < nr_pages; i++) {
unsigned long addr = (unsigned long)(*pages);
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
struct vm_area_struct *vma;
mm/migrate: convert do_pages_stat_array() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference just to read the nid and get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). Note that the other errors (-EACCESS, -EBUSY, -EIO, -EINVAL, -ENOMEM) so far only applied when actually moving pages, not when only querying stats. We'll effectively drop the "secretmem" check we had in follow_page(), but that shouldn't really matter here, we're not accessing folio/page content after all. Link: https://lkml.kernel.org/r/20240802155524.517137-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:16 +00:00
struct folio_walk fw;
struct folio *folio;
int err = -EFAULT;
vma = vma_lookup(mm, addr);
if (!vma)
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
goto set_status;
mm/migrate: convert do_pages_stat_array() from follow_page() to folio_walk Let's use folio_walk instead, so we can avoid taking a folio reference just to read the nid and get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). Note that the other errors (-EACCESS, -EBUSY, -EIO, -EINVAL, -ENOMEM) so far only applied when actually moving pages, not when only querying stats. We'll effectively drop the "secretmem" check we had in follow_page(), but that shouldn't really matter here, we're not accessing folio/page content after all. Link: https://lkml.kernel.org/r/20240802155524.517137-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 15:55:16 +00:00
folio = folio_walk_start(&fw, vma, addr, FW_ZEROPAGE);
if (folio) {
if (is_zero_folio(folio) || is_huge_zero_folio(folio))
err = -EFAULT;
else if (folio_is_zone_device(folio))
err = -ENOENT;
else
err = folio_nid(folio);
folio_walk_end(&fw, vma);
} else {
err = -ENOENT;
}
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
set_status:
*status = err;
pages++;
status++;
}
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 04:33:25 +00:00
mmap_read_unlock(mm);
}
static int get_compat_pages_array(const void __user *chunk_pages[],
const void __user * __user *pages,
unsigned long chunk_nr)
{
compat_uptr_t __user *pages32 = (compat_uptr_t __user *)pages;
compat_uptr_t p;
int i;
for (i = 0; i < chunk_nr; i++) {
if (get_user(p, pages32 + i))
return -EFAULT;
chunk_pages[i] = compat_ptr(p);
}
return 0;
}
/*
* Determine the nodes of a user array of pages and store it in
* a user array of status.
*/
static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
const void __user * __user *pages,
int __user *status)
{
#define DO_PAGES_STAT_CHUNK_NR 16UL
const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR];
int chunk_status[DO_PAGES_STAT_CHUNK_NR];
while (nr_pages) {
unsigned long chunk_nr = min(nr_pages, DO_PAGES_STAT_CHUNK_NR);
if (in_compat_syscall()) {
if (get_compat_pages_array(chunk_pages, pages,
chunk_nr))
break;
} else {
if (copy_from_user(chunk_pages, pages,
chunk_nr * sizeof(*chunk_pages)))
break;
}
do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status);
if (copy_to_user(status, chunk_status, chunk_nr * sizeof(*status)))
break;
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
pages += chunk_nr;
status += chunk_nr;
nr_pages -= chunk_nr;
}
return nr_pages ? -EFAULT : 0;
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
}
static struct mm_struct *find_mm_struct(pid_t pid, nodemask_t *mem_nodes)
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
{
struct task_struct *task;
struct mm_struct *mm;
/*
* There is no need to check if current process has the right to modify
* the specified process when they are same.
*/
if (!pid) {
mmget(current->mm);
*mem_nodes = cpuset_mems_allowed(current);
return current->mm;
}
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
/* Find the mm_struct */
rcu_read_lock();
task = find_task_by_vpid(pid);
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
if (!task) {
rcu_read_unlock();
return ERR_PTR(-ESRCH);
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
}
mm: fix move/migrate_pages() race on task struct Migration functions perform the rcu_read_unlock too early. As a result the task pointed to may change from under us. This can result in an oops, as reported by Dave Hansen in https://lkml.org/lkml/2012/2/23/302. The following patch extend the period of the rcu_read_lock until after the permissions checks are done. We also take a refcount so that the task reference is stable when calling security check functions and performing cpuset node validation (which takes a mutex). The refcount is dropped before actual page migration occurs so there is no change to the refcounts held during page migration. Also move the determination of the mm of the task struct to immediately before the do_migrate*() calls so that it is clear that we switch from handling the task during permission checks to the mm for the actual migration. Since the determination is only done once and we then no longer use the task_struct we can be sure that we operate on a specific address space that will not change from under us. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Christoph Lameter <cl@linux.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Reported-by: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:06 +00:00
get_task_struct(task);
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
/*
* Check if this process has the right to modify the specified
* process. Use the regular "ptrace_may_access()" checks.
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
*/
if (!ptrace_may_access(task, PTRACE_MODE_READ_REALCREDS)) {
rcu_read_unlock();
mm = ERR_PTR(-EPERM);
goto out;
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
}
rcu_read_unlock();
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
mm = ERR_PTR(security_task_movememory(task));
if (IS_ERR(mm))
goto out;
*mem_nodes = cpuset_mems_allowed(task);
mm: fix move/migrate_pages() race on task struct Migration functions perform the rcu_read_unlock too early. As a result the task pointed to may change from under us. This can result in an oops, as reported by Dave Hansen in https://lkml.org/lkml/2012/2/23/302. The following patch extend the period of the rcu_read_lock until after the permissions checks are done. We also take a refcount so that the task reference is stable when calling security check functions and performing cpuset node validation (which takes a mutex). The refcount is dropped before actual page migration occurs so there is no change to the refcounts held during page migration. Also move the determination of the mm of the task struct to immediately before the do_migrate*() calls so that it is clear that we switch from handling the task during permission checks to the mm for the actual migration. Since the determination is only done once and we then no longer use the task_struct we can be sure that we operate on a specific address space that will not change from under us. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Christoph Lameter <cl@linux.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Reported-by: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:06 +00:00
mm = get_task_mm(task);
out:
mm: fix move/migrate_pages() race on task struct Migration functions perform the rcu_read_unlock too early. As a result the task pointed to may change from under us. This can result in an oops, as reported by Dave Hansen in https://lkml.org/lkml/2012/2/23/302. The following patch extend the period of the rcu_read_lock until after the permissions checks are done. We also take a refcount so that the task reference is stable when calling security check functions and performing cpuset node validation (which takes a mutex). The refcount is dropped before actual page migration occurs so there is no change to the refcounts held during page migration. Also move the determination of the mm of the task struct to immediately before the do_migrate*() calls so that it is clear that we switch from handling the task during permission checks to the mm for the actual migration. Since the determination is only done once and we then no longer use the task_struct we can be sure that we operate on a specific address space that will not change from under us. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Christoph Lameter <cl@linux.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Reported-by: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 23:34:06 +00:00
put_task_struct(task);
if (!mm)
mm = ERR_PTR(-EINVAL);
return mm;
}
/*
* Move a list of pages in the address space of the currently executing
* process.
*/
static int kernel_move_pages(pid_t pid, unsigned long nr_pages,
const void __user * __user *pages,
const int __user *nodes,
int __user *status, int flags)
{
struct mm_struct *mm;
int err;
nodemask_t task_nodes;
/* Check flags */
if (flags & ~(MPOL_MF_MOVE|MPOL_MF_MOVE_ALL))
return -EINVAL;
if ((flags & MPOL_MF_MOVE_ALL) && !capable(CAP_SYS_NICE))
return -EPERM;
mm = find_mm_struct(pid, &task_nodes);
if (IS_ERR(mm))
return PTR_ERR(mm);
if (nodes)
err = do_pages_move(mm, task_nodes, nr_pages, pages,
nodes, status, flags);
else
err = do_pages_stat(mm, nr_pages, pages, status);
[PATCH] page migration: sys_move_pages(): support moving of individual pages move_pages() is used to move individual pages of a process. The function can be used to determine the location of pages and to move them onto the desired node. move_pages() returns status information for each page. long move_pages(pid, number_of_pages_to_move, addresses_of_pages[], nodes[] or NULL, status[], flags); The addresses of pages is an array of void * pointing to the pages to be moved. The nodes array contains the node numbers that the pages should be moved to. If a NULL is passed instead of an array then no pages are moved but the status array is updated. The status request may be used to determine the page state before issuing another move_pages() to move pages. The status array will contain the state of all individual page migration attempts when the function terminates. The status array is only valid if move_pages() completed successfullly. Possible page states in status[]: 0..MAX_NUMNODES The page is now on the indicated node. -ENOENT Page is not present -EACCES Page is mapped by multiple processes and can only be moved if MPOL_MF_MOVE_ALL is specified. -EPERM The page has been mlocked by a process/driver and cannot be moved. -EBUSY Page is busy and cannot be moved. Try again later. -EFAULT Invalid address (no VMA or zero page). -ENOMEM Unable to allocate memory on target node. -EIO Unable to write back page. The page must be written back in order to move it since the page is dirty and the filesystem does not provide a migration function that would allow the moving of dirty pages. -EINVAL A dirty page cannot be moved. The filesystem does not provide a migration function and has no ability to write back pages. The flags parameter indicates what types of pages to move: MPOL_MF_MOVE Move pages that are only mapped by the process. MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes. Requires sufficient capabilities. Possible return codes from move_pages() -ENOENT No pages found that would require moving. All pages are either already on the target node, not present, had an invalid address or could not be moved because they were mapped by multiple processes. -EINVAL Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt to migrate pages in a kernel thread. -EPERM MPOL_MF_MOVE_ALL specified without sufficient priviledges. or an attempt to move a process belonging to another user. -EACCES One of the target nodes is not allowed by the current cpuset. -ENODEV One of the target nodes is not online. -ESRCH Process does not exist. -E2BIG Too many pages to move. -ENOMEM Not enough memory to allocate control array. -EFAULT Parameters could not be accessed. A test program for move_pages() may be found with the patches on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3 From: Christoph Lameter <clameter@sgi.com> Detailed results for sys_move_pages() Pass a pointer to an integer to get_new_page() that may be used to indicate where the completion status of a migration operation should be placed. This allows sys_move_pags() to report back exactly what happened to each page. Wish there would be a better way to do this. Looks a bit hacky. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:03:55 +00:00
mmput(mm);
return err;
}
SYSCALL_DEFINE6(move_pages, pid_t, pid, unsigned long, nr_pages,
const void __user * __user *, pages,
const int __user *, nodes,
int __user *, status, int, flags)
{
return kernel_move_pages(pid, nr_pages, pages, nodes, status, flags);
}
#ifdef CONFIG_NUMA_BALANCING
/*
* Returns true if this is a safe migration target node for misplaced NUMA
* pages. Currently it only checks the watermarks which is crude.
*/
static bool migrate_balanced_pgdat(struct pglist_data *pgdat,
unsigned long nr_migrate_pages)
{
int z;
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 22:45:31 +00:00
for (z = pgdat->nr_zones - 1; z >= 0; z--) {
struct zone *zone = pgdat->node_zones + z;
if (!managed_zone(zone))
continue;
/* Avoid waking kswapd by allocating pages_to_migrate pages. */
if (!zone_watermark_ok(zone, 0,
high_wmark_pages(zone) +
nr_migrate_pages,
ZONE_MOVABLE, ALLOC_CMA))
continue;
return true;
}
return false;
}
static struct folio *alloc_misplaced_dst_folio(struct folio *src,
unsigned long data)
{
int nid = (int) data;
int order = folio_order(src);
gfp_t gfp = __GFP_THISNODE;
if (order > 0)
gfp |= GFP_TRANSHUGE_LIGHT;
else {
gfp |= GFP_HIGHUSER_MOVABLE | __GFP_NOMEMALLOC | __GFP_NORETRY |
__GFP_NOWARN;
gfp &= ~__GFP_RECLAIM;
}
return __folio_alloc_node(gfp, order, nid);
mm: thp: refactor NUMA fault handling When the THP NUMA fault support was added THP migration was not supported yet. So the ad hoc THP migration was implemented in NUMA fault handling. Since v4.14 THP migration has been supported so it doesn't make too much sense to still keep another THP migration implementation rather than using the generic migration code. This patch reworks the NUMA fault handling to use generic migration implementation to migrate misplaced page. There is no functional change. After the refactor the flow of NUMA fault handling looks just like its PTE counterpart: Acquire ptl Prepare for migration (elevate page refcount) Release ptl Isolate page from lru and elevate page refcount Migrate the misplaced THP If migration fails just restore the old normal PMD. In the old code anon_vma lock was needed to serialize THP migration against THP split, but since then the THP code has been reworked a lot, it seems anon_vma lock is not required anymore to avoid the race. The page refcount elevation when holding ptl should prevent from THP split. Use migrate_misplaced_page() for both base page and THP NUMA hinting fault and remove all the dead and duplicate code. [dan.carpenter@oracle.com: fix a double unlock bug] Link: https://lkml.kernel.org/r/YLX8uYN01JmfLnlK@mwanda Link: https://lkml.kernel.org/r/20210518200801.7413-4-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:51:42 +00:00
}
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
/*
* Prepare for calling migrate_misplaced_folio() by isolating the folio if
* permitted. Must be called with the PTL still held.
*/
int migrate_misplaced_folio_prepare(struct folio *folio,
struct vm_area_struct *vma, int node)
{
int nr_pages = folio_nr_pages(folio);
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
pg_data_t *pgdat = NODE_DATA(node);
if (folio_is_file_lru(folio)) {
/*
* Do not migrate file folios that are mapped in multiple
* processes with execute permissions as they are probably
* shared libraries.
*
* See folio_likely_mapped_shared() on possible imprecision
* when we cannot easily detect if a folio is shared.
*/
if ((vma->vm_flags & VM_EXEC) &&
folio_likely_mapped_shared(folio))
return -EACCES;
/*
* Do not migrate dirty folios as not all filesystems can move
* dirty folios in MIGRATE_ASYNC mode which is a waste of
* cycles.
*/
if (folio_test_dirty(folio))
return -EAGAIN;
}
/* Avoid migrating to a node that is nearly full */
NUMA balancing: optimize page placement for memory tiering system With the advent of various new memory types, some machines will have multiple types of memory, e.g. DRAM and PMEM (persistent memory). The memory subsystem of these machines can be called memory tiering system, because the performance of the different types of memory are usually different. In such system, because of the memory accessing pattern changing etc, some pages in the slow memory may become hot globally. So in this patch, the NUMA balancing mechanism is enhanced to optimize the page placement among the different memory types according to hot/cold dynamically. In a typical memory tiering system, there are CPUs, fast memory and slow memory in each physical NUMA node. The CPUs and the fast memory will be put in one logical node (called fast memory node), while the slow memory will be put in another (faked) logical node (called slow memory node). That is, the fast memory is regarded as local while the slow memory is regarded as remote. So it's possible for the recently accessed pages in the slow memory node to be promoted to the fast memory node via the existing NUMA balancing mechanism. The original NUMA balancing mechanism will stop to migrate pages if the free memory of the target node becomes below the high watermark. This is a reasonable policy if there's only one memory type. But this makes the original NUMA balancing mechanism almost do not work to optimize page placement among different memory types. Details are as follows. It's the common cases that the working-set size of the workload is larger than the size of the fast memory nodes. Otherwise, it's unnecessary to use the slow memory at all. So, there are almost always no enough free pages in the fast memory nodes, so that the globally hot pages in the slow memory node cannot be promoted to the fast memory node. To solve the issue, we have 2 choices as follows, a. Ignore the free pages watermark checking when promoting hot pages from the slow memory node to the fast memory node. This will create some memory pressure in the fast memory node, thus trigger the memory reclaiming. So that, the cold pages in the fast memory node will be demoted to the slow memory node. b. Define a new watermark called wmark_promo which is higher than wmark_high, and have kswapd reclaiming pages until free pages reach such watermark. The scenario is as follows: when we want to promote hot-pages from a slow memory to a fast memory, but fast memory's free pages would go lower than high watermark with such promotion, we wake up kswapd with wmark_promo watermark in order to demote cold pages and free us up some space. So, next time we want to promote hot-pages we might have a chance of doing so. The choice "a" may create high memory pressure in the fast memory node. If the memory pressure of the workload is high, the memory pressure may become so high that the memory allocation latency of the workload is influenced, e.g. the direct reclaiming may be triggered. The choice "b" works much better at this aspect. If the memory pressure of the workload is high, the hot pages promotion will stop earlier because its allocation watermark is higher than that of the normal memory allocation. So in this patch, choice "b" is implemented. A new zone watermark (WMARK_PROMO) is added. Which is larger than the high watermark and can be controlled via watermark_scale_factor. In addition to the original page placement optimization among sockets, the NUMA balancing mechanism is extended to be used to optimize page placement according to hot/cold among different memory types. So the sysctl user space interface (numa_balancing) is extended in a backward compatible way as follow, so that the users can enable/disable these functionality individually. The sysctl is converted from a Boolean value to a bits field. The definition of the flags is, - 0: NUMA_BALANCING_DISABLED - 1: NUMA_BALANCING_NORMAL - 2: NUMA_BALANCING_MEMORY_TIERING We have tested the patch with the pmbench memory accessing benchmark with the 80:20 read/write ratio and the Gauss access address distribution on a 2 socket Intel server with Optane DC Persistent Memory Model. The test results shows that the pmbench score can improve up to 95.9%. Thanks Andrew Morton to help fix the document format error. Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:23 +00:00
if (!migrate_balanced_pgdat(pgdat, nr_pages)) {
int z;
if (!(sysctl_numa_balancing_mode & NUMA_BALANCING_MEMORY_TIERING))
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
return -EAGAIN;
NUMA balancing: optimize page placement for memory tiering system With the advent of various new memory types, some machines will have multiple types of memory, e.g. DRAM and PMEM (persistent memory). The memory subsystem of these machines can be called memory tiering system, because the performance of the different types of memory are usually different. In such system, because of the memory accessing pattern changing etc, some pages in the slow memory may become hot globally. So in this patch, the NUMA balancing mechanism is enhanced to optimize the page placement among the different memory types according to hot/cold dynamically. In a typical memory tiering system, there are CPUs, fast memory and slow memory in each physical NUMA node. The CPUs and the fast memory will be put in one logical node (called fast memory node), while the slow memory will be put in another (faked) logical node (called slow memory node). That is, the fast memory is regarded as local while the slow memory is regarded as remote. So it's possible for the recently accessed pages in the slow memory node to be promoted to the fast memory node via the existing NUMA balancing mechanism. The original NUMA balancing mechanism will stop to migrate pages if the free memory of the target node becomes below the high watermark. This is a reasonable policy if there's only one memory type. But this makes the original NUMA balancing mechanism almost do not work to optimize page placement among different memory types. Details are as follows. It's the common cases that the working-set size of the workload is larger than the size of the fast memory nodes. Otherwise, it's unnecessary to use the slow memory at all. So, there are almost always no enough free pages in the fast memory nodes, so that the globally hot pages in the slow memory node cannot be promoted to the fast memory node. To solve the issue, we have 2 choices as follows, a. Ignore the free pages watermark checking when promoting hot pages from the slow memory node to the fast memory node. This will create some memory pressure in the fast memory node, thus trigger the memory reclaiming. So that, the cold pages in the fast memory node will be demoted to the slow memory node. b. Define a new watermark called wmark_promo which is higher than wmark_high, and have kswapd reclaiming pages until free pages reach such watermark. The scenario is as follows: when we want to promote hot-pages from a slow memory to a fast memory, but fast memory's free pages would go lower than high watermark with such promotion, we wake up kswapd with wmark_promo watermark in order to demote cold pages and free us up some space. So, next time we want to promote hot-pages we might have a chance of doing so. The choice "a" may create high memory pressure in the fast memory node. If the memory pressure of the workload is high, the memory pressure may become so high that the memory allocation latency of the workload is influenced, e.g. the direct reclaiming may be triggered. The choice "b" works much better at this aspect. If the memory pressure of the workload is high, the hot pages promotion will stop earlier because its allocation watermark is higher than that of the normal memory allocation. So in this patch, choice "b" is implemented. A new zone watermark (WMARK_PROMO) is added. Which is larger than the high watermark and can be controlled via watermark_scale_factor. In addition to the original page placement optimization among sockets, the NUMA balancing mechanism is extended to be used to optimize page placement according to hot/cold among different memory types. So the sysctl user space interface (numa_balancing) is extended in a backward compatible way as follow, so that the users can enable/disable these functionality individually. The sysctl is converted from a Boolean value to a bits field. The definition of the flags is, - 0: NUMA_BALANCING_DISABLED - 1: NUMA_BALANCING_NORMAL - 2: NUMA_BALANCING_MEMORY_TIERING We have tested the patch with the pmbench memory accessing benchmark with the 80:20 read/write ratio and the Gauss access address distribution on a 2 socket Intel server with Optane DC Persistent Memory Model. The test results shows that the pmbench score can improve up to 95.9%. Thanks Andrew Morton to help fix the document format error. Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:23 +00:00
for (z = pgdat->nr_zones - 1; z >= 0; z--) {
if (managed_zone(pgdat->node_zones + z))
NUMA balancing: optimize page placement for memory tiering system With the advent of various new memory types, some machines will have multiple types of memory, e.g. DRAM and PMEM (persistent memory). The memory subsystem of these machines can be called memory tiering system, because the performance of the different types of memory are usually different. In such system, because of the memory accessing pattern changing etc, some pages in the slow memory may become hot globally. So in this patch, the NUMA balancing mechanism is enhanced to optimize the page placement among the different memory types according to hot/cold dynamically. In a typical memory tiering system, there are CPUs, fast memory and slow memory in each physical NUMA node. The CPUs and the fast memory will be put in one logical node (called fast memory node), while the slow memory will be put in another (faked) logical node (called slow memory node). That is, the fast memory is regarded as local while the slow memory is regarded as remote. So it's possible for the recently accessed pages in the slow memory node to be promoted to the fast memory node via the existing NUMA balancing mechanism. The original NUMA balancing mechanism will stop to migrate pages if the free memory of the target node becomes below the high watermark. This is a reasonable policy if there's only one memory type. But this makes the original NUMA balancing mechanism almost do not work to optimize page placement among different memory types. Details are as follows. It's the common cases that the working-set size of the workload is larger than the size of the fast memory nodes. Otherwise, it's unnecessary to use the slow memory at all. So, there are almost always no enough free pages in the fast memory nodes, so that the globally hot pages in the slow memory node cannot be promoted to the fast memory node. To solve the issue, we have 2 choices as follows, a. Ignore the free pages watermark checking when promoting hot pages from the slow memory node to the fast memory node. This will create some memory pressure in the fast memory node, thus trigger the memory reclaiming. So that, the cold pages in the fast memory node will be demoted to the slow memory node. b. Define a new watermark called wmark_promo which is higher than wmark_high, and have kswapd reclaiming pages until free pages reach such watermark. The scenario is as follows: when we want to promote hot-pages from a slow memory to a fast memory, but fast memory's free pages would go lower than high watermark with such promotion, we wake up kswapd with wmark_promo watermark in order to demote cold pages and free us up some space. So, next time we want to promote hot-pages we might have a chance of doing so. The choice "a" may create high memory pressure in the fast memory node. If the memory pressure of the workload is high, the memory pressure may become so high that the memory allocation latency of the workload is influenced, e.g. the direct reclaiming may be triggered. The choice "b" works much better at this aspect. If the memory pressure of the workload is high, the hot pages promotion will stop earlier because its allocation watermark is higher than that of the normal memory allocation. So in this patch, choice "b" is implemented. A new zone watermark (WMARK_PROMO) is added. Which is larger than the high watermark and can be controlled via watermark_scale_factor. In addition to the original page placement optimization among sockets, the NUMA balancing mechanism is extended to be used to optimize page placement according to hot/cold among different memory types. So the sysctl user space interface (numa_balancing) is extended in a backward compatible way as follow, so that the users can enable/disable these functionality individually. The sysctl is converted from a Boolean value to a bits field. The definition of the flags is, - 0: NUMA_BALANCING_DISABLED - 1: NUMA_BALANCING_NORMAL - 2: NUMA_BALANCING_MEMORY_TIERING We have tested the patch with the pmbench memory accessing benchmark with the 80:20 read/write ratio and the Gauss access address distribution on a 2 socket Intel server with Optane DC Persistent Memory Model. The test results shows that the pmbench score can improve up to 95.9%. Thanks Andrew Morton to help fix the document format error. Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:23 +00:00
break;
}
mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index With numa balancing on, when a numa system is running where a numa node doesn't have its local memory so it has no managed zones, the following oops has been observed. It's because wakeup_kswapd() is called with a wrong zone index, -1. Fixed it by checking the index before calling wakeup_kswapd(). > BUG: unable to handle page fault for address: 00000000000033f3 > #PF: supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 0 P4D 0 > Oops: 0000 [#1] PREEMPT SMP NOPTI > CPU: 2 PID: 895 Comm: masim Not tainted 6.6.0-dirty #255 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS > rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 > RIP: 0010:wakeup_kswapd (./linux/mm/vmscan.c:7812) > Code: (omitted) > RSP: 0000:ffffc90004257d58 EFLAGS: 00010286 > RAX: ffffffffffffffff RBX: ffff88883fff0480 RCX: 0000000000000003 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88883fff0480 > RBP: ffffffffffffffff R08: ff0003ffffffffff R09: ffffffffffffffff > R10: ffff888106c95540 R11: 0000000055555554 R12: 0000000000000003 > R13: 0000000000000000 R14: 0000000000000000 R15: ffff88883fff0940 > FS: 00007fc4b8124740(0000) GS:ffff888827c00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00000000000033f3 CR3: 000000026cc08004 CR4: 0000000000770ee0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > PKRU: 55555554 > Call Trace: > <TASK> > ? __die > ? page_fault_oops > ? __pte_offset_map_lock > ? exc_page_fault > ? asm_exc_page_fault > ? wakeup_kswapd > migrate_misplaced_page > __handle_mm_fault > handle_mm_fault > do_user_addr_fault > exc_page_fault > asm_exc_page_fault > RIP: 0033:0x55b897ba0808 > Code: (omitted) > RSP: 002b:00007ffeefa821a0 EFLAGS: 00010287 > RAX: 000055b89983acd0 RBX: 00007ffeefa823f8 RCX: 000055b89983acd0 > RDX: 00007fc2f8122010 RSI: 0000000000020000 RDI: 000055b89983acd0 > RBP: 00007ffeefa821a0 R08: 0000000000000037 R09: 0000000000000075 > R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 > R13: 00007ffeefa82410 R14: 000055b897ba5dd8 R15: 00007fc4b8340000 > </TASK> Link: https://lkml.kernel.org/r/20240216111502.79759-1-byungchul@sk.com Signed-off-by: Byungchul Park <byungchul@sk.com> Reported-by: Hyeongtak Ji <hyeongtak.ji@sk.com> Fixes: c574bbe917036 ("NUMA balancing: optimize page placement for memory tiering system") Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-16 11:15:02 +00:00
/*
* If there are no managed zones, it should not proceed
* further.
*/
if (z < 0)
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
return -EAGAIN;
mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index With numa balancing on, when a numa system is running where a numa node doesn't have its local memory so it has no managed zones, the following oops has been observed. It's because wakeup_kswapd() is called with a wrong zone index, -1. Fixed it by checking the index before calling wakeup_kswapd(). > BUG: unable to handle page fault for address: 00000000000033f3 > #PF: supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 0 P4D 0 > Oops: 0000 [#1] PREEMPT SMP NOPTI > CPU: 2 PID: 895 Comm: masim Not tainted 6.6.0-dirty #255 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS > rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 > RIP: 0010:wakeup_kswapd (./linux/mm/vmscan.c:7812) > Code: (omitted) > RSP: 0000:ffffc90004257d58 EFLAGS: 00010286 > RAX: ffffffffffffffff RBX: ffff88883fff0480 RCX: 0000000000000003 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88883fff0480 > RBP: ffffffffffffffff R08: ff0003ffffffffff R09: ffffffffffffffff > R10: ffff888106c95540 R11: 0000000055555554 R12: 0000000000000003 > R13: 0000000000000000 R14: 0000000000000000 R15: ffff88883fff0940 > FS: 00007fc4b8124740(0000) GS:ffff888827c00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00000000000033f3 CR3: 000000026cc08004 CR4: 0000000000770ee0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > PKRU: 55555554 > Call Trace: > <TASK> > ? __die > ? page_fault_oops > ? __pte_offset_map_lock > ? exc_page_fault > ? asm_exc_page_fault > ? wakeup_kswapd > migrate_misplaced_page > __handle_mm_fault > handle_mm_fault > do_user_addr_fault > exc_page_fault > asm_exc_page_fault > RIP: 0033:0x55b897ba0808 > Code: (omitted) > RSP: 002b:00007ffeefa821a0 EFLAGS: 00010287 > RAX: 000055b89983acd0 RBX: 00007ffeefa823f8 RCX: 000055b89983acd0 > RDX: 00007fc2f8122010 RSI: 0000000000020000 RDI: 000055b89983acd0 > RBP: 00007ffeefa821a0 R08: 0000000000000037 R09: 0000000000000075 > R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 > R13: 00007ffeefa82410 R14: 000055b897ba5dd8 R15: 00007fc4b8340000 > </TASK> Link: https://lkml.kernel.org/r/20240216111502.79759-1-byungchul@sk.com Signed-off-by: Byungchul Park <byungchul@sk.com> Reported-by: Hyeongtak Ji <hyeongtak.ji@sk.com> Fixes: c574bbe917036 ("NUMA balancing: optimize page placement for memory tiering system") Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-16 11:15:02 +00:00
wakeup_kswapd(pgdat->node_zones + z, 0,
folio_order(folio), ZONE_MOVABLE);
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
return -EAGAIN;
NUMA balancing: optimize page placement for memory tiering system With the advent of various new memory types, some machines will have multiple types of memory, e.g. DRAM and PMEM (persistent memory). The memory subsystem of these machines can be called memory tiering system, because the performance of the different types of memory are usually different. In such system, because of the memory accessing pattern changing etc, some pages in the slow memory may become hot globally. So in this patch, the NUMA balancing mechanism is enhanced to optimize the page placement among the different memory types according to hot/cold dynamically. In a typical memory tiering system, there are CPUs, fast memory and slow memory in each physical NUMA node. The CPUs and the fast memory will be put in one logical node (called fast memory node), while the slow memory will be put in another (faked) logical node (called slow memory node). That is, the fast memory is regarded as local while the slow memory is regarded as remote. So it's possible for the recently accessed pages in the slow memory node to be promoted to the fast memory node via the existing NUMA balancing mechanism. The original NUMA balancing mechanism will stop to migrate pages if the free memory of the target node becomes below the high watermark. This is a reasonable policy if there's only one memory type. But this makes the original NUMA balancing mechanism almost do not work to optimize page placement among different memory types. Details are as follows. It's the common cases that the working-set size of the workload is larger than the size of the fast memory nodes. Otherwise, it's unnecessary to use the slow memory at all. So, there are almost always no enough free pages in the fast memory nodes, so that the globally hot pages in the slow memory node cannot be promoted to the fast memory node. To solve the issue, we have 2 choices as follows, a. Ignore the free pages watermark checking when promoting hot pages from the slow memory node to the fast memory node. This will create some memory pressure in the fast memory node, thus trigger the memory reclaiming. So that, the cold pages in the fast memory node will be demoted to the slow memory node. b. Define a new watermark called wmark_promo which is higher than wmark_high, and have kswapd reclaiming pages until free pages reach such watermark. The scenario is as follows: when we want to promote hot-pages from a slow memory to a fast memory, but fast memory's free pages would go lower than high watermark with such promotion, we wake up kswapd with wmark_promo watermark in order to demote cold pages and free us up some space. So, next time we want to promote hot-pages we might have a chance of doing so. The choice "a" may create high memory pressure in the fast memory node. If the memory pressure of the workload is high, the memory pressure may become so high that the memory allocation latency of the workload is influenced, e.g. the direct reclaiming may be triggered. The choice "b" works much better at this aspect. If the memory pressure of the workload is high, the hot pages promotion will stop earlier because its allocation watermark is higher than that of the normal memory allocation. So in this patch, choice "b" is implemented. A new zone watermark (WMARK_PROMO) is added. Which is larger than the high watermark and can be controlled via watermark_scale_factor. In addition to the original page placement optimization among sockets, the NUMA balancing mechanism is extended to be used to optimize page placement according to hot/cold among different memory types. So the sysctl user space interface (numa_balancing) is extended in a backward compatible way as follow, so that the users can enable/disable these functionality individually. The sysctl is converted from a Boolean value to a bits field. The definition of the flags is, - 0: NUMA_BALANCING_DISABLED - 1: NUMA_BALANCING_NORMAL - 2: NUMA_BALANCING_MEMORY_TIERING We have tested the patch with the pmbench memory accessing benchmark with the 80:20 read/write ratio and the Gauss access address distribution on a 2 socket Intel server with Optane DC Persistent Memory Model. The test results shows that the pmbench score can improve up to 95.9%. Thanks Andrew Morton to help fix the document format error. Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:23 +00:00
}
if (!folio_isolate_lru(folio))
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
return -EAGAIN;
node_stat_mod_folio(folio, NR_ISOLATED_ANON + folio_is_file_lru(folio),
nr_pages);
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
return 0;
}
/*
* Attempt to migrate a misplaced folio to the specified destination
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
* node. Caller is expected to have isolated the folio by calling
* migrate_misplaced_folio_prepare(), which will result in an
* elevated reference count on the folio. This function will un-isolate the
* folio, dereferencing the folio before returning.
*/
int migrate_misplaced_folio(struct folio *folio, struct vm_area_struct *vma,
int node)
{
pg_data_t *pgdat = NODE_DATA(node);
int nr_remaining;
NUMA Balancing: add page promotion counter Patch series "NUMA balancing: optimize memory placement for memory tiering system", v13 With the advent of various new memory types, some machines will have multiple types of memory, e.g. DRAM and PMEM (persistent memory). The memory subsystem of these machines can be called memory tiering system, because the performance of the different types of memory are different. After commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM"), the PMEM could be used as the cost-effective volatile memory in separate NUMA nodes. In a typical memory tiering system, there are CPUs, DRAM and PMEM in each physical NUMA node. The CPUs and the DRAM will be put in one logical node, while the PMEM will be put in another (faked) logical node. To optimize the system overall performance, the hot pages should be placed in DRAM node. To do that, we need to identify the hot pages in the PMEM node and migrate them to DRAM node via NUMA migration. In the original NUMA balancing, there are already a set of existing mechanisms to identify the pages recently accessed by the CPUs in a node and migrate the pages to the node. So we can reuse these mechanisms to build the mechanisms to optimize the page placement in the memory tiering system. This is implemented in this patchset. At the other hand, the cold pages should be placed in PMEM node. So, we also need to identify the cold pages in the DRAM node and migrate them to PMEM node. In commit 26aa2d199d6f ("mm/migrate: demote pages during reclaim"), a mechanism to demote the cold DRAM pages to PMEM node under memory pressure is implemented. Based on that, the cold DRAM pages can be demoted to PMEM node proactively to free some memory space on DRAM node to accommodate the promoted hot PMEM pages. This is implemented in this patchset too. We have tested the solution with the pmbench memory accessing benchmark with the 80:20 read/write ratio and the Gauss access address distribution on a 2 socket Intel server with Optane DC Persistent Memory Model. The test results shows that the pmbench score can improve up to 95.9%. This patch (of 3): In a system with multiple memory types, e.g. DRAM and PMEM, the CPU and DRAM in one socket will be put in one NUMA node as before, while the PMEM will be put in another NUMA node as described in the description of the commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM"). So, the NUMA balancing mechanism will identify all PMEM accesses as remote access and try to promote the PMEM pages to DRAM. To distinguish the number of the inter-type promoted pages from that of the inter-socket migrated pages. A new vmstat count is added. The counter is per-node (count in the target node). So this can be used to identify promotion imbalance among the NUMA nodes. Link: https://lkml.kernel.org/r/20220301085329.3210428-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220221084529.1052339-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220221084529.1052339-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:20 +00:00
unsigned int nr_succeeded;
LIST_HEAD(migratepages);
mm,memcg: provide per-cgroup counters for NUMA balancing operations The ability to observe the demotion and promotion decisions made by the kernel on a per-cgroup basis is important for monitoring and tuning containerized workloads on machines equipped with tiered memory. Different containers in the system may experience drastically different memory tiering actions that cannot be distinguished from the global counters alone. For example, a container running a workload that has a much hotter memory accesses will likely see more promotions and fewer demotions, potentially depriving a colocated container of top tier memory to such an extent that its performance degrades unacceptably. For another example, some containers may exhibit longer periods between data reuse, causing much more numa_hint_faults than numa_pages_migrated. In this case, tuning hot_threshold_ms may be appropriate, but the signal can easily be lost if only global counters are available. In the long term, we hope to introduce per-cgroup control of promotion and demotion actions to implement memory placement policies in tiering. This patch set adds seven counters to memory.stat in a cgroup: numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd, pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_* and pgpromote_success are also available in memory.numa_stat. count_memcg_events_mm() is added to count multiple event occurrences at once, and get_mem_cgroup_from_folio() is added because we need to get a reference to the memcg of a folio before it's migrated to track numa_pages_migrated. The accounting of PGDEMOTE_* is moved to shrink_inactive_list() before being changed to per-cgroup. [kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst] Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Wei Xu <weixugc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-14 17:42:27 +00:00
struct mem_cgroup *memcg = get_mem_cgroup_from_folio(folio);
struct lruvec *lruvec = mem_cgroup_lruvec(memcg, pgdat);
list_add(&folio->lru, &migratepages);
nr_remaining = migrate_pages(&migratepages, alloc_misplaced_dst_folio,
NULL, node, MIGRATE_ASYNC,
MR_NUMA_MISPLACED, &nr_succeeded);
if (nr_remaining && !list_empty(&migratepages))
putback_movable_pages(&migratepages);
NUMA Balancing: add page promotion counter Patch series "NUMA balancing: optimize memory placement for memory tiering system", v13 With the advent of various new memory types, some machines will have multiple types of memory, e.g. DRAM and PMEM (persistent memory). The memory subsystem of these machines can be called memory tiering system, because the performance of the different types of memory are different. After commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM"), the PMEM could be used as the cost-effective volatile memory in separate NUMA nodes. In a typical memory tiering system, there are CPUs, DRAM and PMEM in each physical NUMA node. The CPUs and the DRAM will be put in one logical node, while the PMEM will be put in another (faked) logical node. To optimize the system overall performance, the hot pages should be placed in DRAM node. To do that, we need to identify the hot pages in the PMEM node and migrate them to DRAM node via NUMA migration. In the original NUMA balancing, there are already a set of existing mechanisms to identify the pages recently accessed by the CPUs in a node and migrate the pages to the node. So we can reuse these mechanisms to build the mechanisms to optimize the page placement in the memory tiering system. This is implemented in this patchset. At the other hand, the cold pages should be placed in PMEM node. So, we also need to identify the cold pages in the DRAM node and migrate them to PMEM node. In commit 26aa2d199d6f ("mm/migrate: demote pages during reclaim"), a mechanism to demote the cold DRAM pages to PMEM node under memory pressure is implemented. Based on that, the cold DRAM pages can be demoted to PMEM node proactively to free some memory space on DRAM node to accommodate the promoted hot PMEM pages. This is implemented in this patchset too. We have tested the solution with the pmbench memory accessing benchmark with the 80:20 read/write ratio and the Gauss access address distribution on a 2 socket Intel server with Optane DC Persistent Memory Model. The test results shows that the pmbench score can improve up to 95.9%. This patch (of 3): In a system with multiple memory types, e.g. DRAM and PMEM, the CPU and DRAM in one socket will be put in one NUMA node as before, while the PMEM will be put in another NUMA node as described in the description of the commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM"). So, the NUMA balancing mechanism will identify all PMEM accesses as remote access and try to promote the PMEM pages to DRAM. To distinguish the number of the inter-type promoted pages from that of the inter-socket migrated pages. A new vmstat count is added. The counter is per-node (count in the target node). So this can be used to identify promotion imbalance among the NUMA nodes. Link: https://lkml.kernel.org/r/20220301085329.3210428-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220221084529.1052339-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220221084529.1052339-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:20 +00:00
if (nr_succeeded) {
count_vm_numa_events(NUMA_PAGE_MIGRATE, nr_succeeded);
mm,memcg: provide per-cgroup counters for NUMA balancing operations The ability to observe the demotion and promotion decisions made by the kernel on a per-cgroup basis is important for monitoring and tuning containerized workloads on machines equipped with tiered memory. Different containers in the system may experience drastically different memory tiering actions that cannot be distinguished from the global counters alone. For example, a container running a workload that has a much hotter memory accesses will likely see more promotions and fewer demotions, potentially depriving a colocated container of top tier memory to such an extent that its performance degrades unacceptably. For another example, some containers may exhibit longer periods between data reuse, causing much more numa_hint_faults than numa_pages_migrated. In this case, tuning hot_threshold_ms may be appropriate, but the signal can easily be lost if only global counters are available. In the long term, we hope to introduce per-cgroup control of promotion and demotion actions to implement memory placement policies in tiering. This patch set adds seven counters to memory.stat in a cgroup: numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd, pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_* and pgpromote_success are also available in memory.numa_stat. count_memcg_events_mm() is added to count multiple event occurrences at once, and get_mem_cgroup_from_folio() is added because we need to get a reference to the memcg of a folio before it's migrated to track numa_pages_migrated. The accounting of PGDEMOTE_* is moved to shrink_inactive_list() before being changed to per-cgroup. [kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst] Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Wei Xu <weixugc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-14 17:42:27 +00:00
count_memcg_events(memcg, NUMA_PAGE_MIGRATE, nr_succeeded);
if ((sysctl_numa_balancing_mode & NUMA_BALANCING_MEMORY_TIERING)
&& !node_is_toptier(folio_nid(folio))
&& node_is_toptier(node))
mm,memcg: provide per-cgroup counters for NUMA balancing operations The ability to observe the demotion and promotion decisions made by the kernel on a per-cgroup basis is important for monitoring and tuning containerized workloads on machines equipped with tiered memory. Different containers in the system may experience drastically different memory tiering actions that cannot be distinguished from the global counters alone. For example, a container running a workload that has a much hotter memory accesses will likely see more promotions and fewer demotions, potentially depriving a colocated container of top tier memory to such an extent that its performance degrades unacceptably. For another example, some containers may exhibit longer periods between data reuse, causing much more numa_hint_faults than numa_pages_migrated. In this case, tuning hot_threshold_ms may be appropriate, but the signal can easily be lost if only global counters are available. In the long term, we hope to introduce per-cgroup control of promotion and demotion actions to implement memory placement policies in tiering. This patch set adds seven counters to memory.stat in a cgroup: numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd, pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_* and pgpromote_success are also available in memory.numa_stat. count_memcg_events_mm() is added to count multiple event occurrences at once, and get_mem_cgroup_from_folio() is added because we need to get a reference to the memcg of a folio before it's migrated to track numa_pages_migrated. The accounting of PGDEMOTE_* is moved to shrink_inactive_list() before being changed to per-cgroup. [kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst] Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Wei Xu <weixugc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-14 17:42:27 +00:00
mod_lruvec_state(lruvec, PGPROMOTE_SUCCESS, nr_succeeded);
NUMA Balancing: add page promotion counter Patch series "NUMA balancing: optimize memory placement for memory tiering system", v13 With the advent of various new memory types, some machines will have multiple types of memory, e.g. DRAM and PMEM (persistent memory). The memory subsystem of these machines can be called memory tiering system, because the performance of the different types of memory are different. After commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM"), the PMEM could be used as the cost-effective volatile memory in separate NUMA nodes. In a typical memory tiering system, there are CPUs, DRAM and PMEM in each physical NUMA node. The CPUs and the DRAM will be put in one logical node, while the PMEM will be put in another (faked) logical node. To optimize the system overall performance, the hot pages should be placed in DRAM node. To do that, we need to identify the hot pages in the PMEM node and migrate them to DRAM node via NUMA migration. In the original NUMA balancing, there are already a set of existing mechanisms to identify the pages recently accessed by the CPUs in a node and migrate the pages to the node. So we can reuse these mechanisms to build the mechanisms to optimize the page placement in the memory tiering system. This is implemented in this patchset. At the other hand, the cold pages should be placed in PMEM node. So, we also need to identify the cold pages in the DRAM node and migrate them to PMEM node. In commit 26aa2d199d6f ("mm/migrate: demote pages during reclaim"), a mechanism to demote the cold DRAM pages to PMEM node under memory pressure is implemented. Based on that, the cold DRAM pages can be demoted to PMEM node proactively to free some memory space on DRAM node to accommodate the promoted hot PMEM pages. This is implemented in this patchset too. We have tested the solution with the pmbench memory accessing benchmark with the 80:20 read/write ratio and the Gauss access address distribution on a 2 socket Intel server with Optane DC Persistent Memory Model. The test results shows that the pmbench score can improve up to 95.9%. This patch (of 3): In a system with multiple memory types, e.g. DRAM and PMEM, the CPU and DRAM in one socket will be put in one NUMA node as before, while the PMEM will be put in another NUMA node as described in the description of the commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM"). So, the NUMA balancing mechanism will identify all PMEM accesses as remote access and try to promote the PMEM pages to DRAM. To distinguish the number of the inter-type promoted pages from that of the inter-socket migrated pages. A new vmstat count is added. The counter is per-node (count in the target node). So this can be used to identify promotion imbalance among the NUMA nodes. Link: https://lkml.kernel.org/r/20220301085329.3210428-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220221084529.1052339-1-ying.huang@intel.com Link: https://lkml.kernel.org/r/20220221084529.1052339-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Wei Xu <weixugc@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:46:20 +00:00
}
mm,memcg: provide per-cgroup counters for NUMA balancing operations The ability to observe the demotion and promotion decisions made by the kernel on a per-cgroup basis is important for monitoring and tuning containerized workloads on machines equipped with tiered memory. Different containers in the system may experience drastically different memory tiering actions that cannot be distinguished from the global counters alone. For example, a container running a workload that has a much hotter memory accesses will likely see more promotions and fewer demotions, potentially depriving a colocated container of top tier memory to such an extent that its performance degrades unacceptably. For another example, some containers may exhibit longer periods between data reuse, causing much more numa_hint_faults than numa_pages_migrated. In this case, tuning hot_threshold_ms may be appropriate, but the signal can easily be lost if only global counters are available. In the long term, we hope to introduce per-cgroup control of promotion and demotion actions to implement memory placement policies in tiering. This patch set adds seven counters to memory.stat in a cgroup: numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd, pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_* and pgpromote_success are also available in memory.numa_stat. count_memcg_events_mm() is added to count multiple event occurrences at once, and get_mem_cgroup_from_folio() is added because we need to get a reference to the memcg of a folio before it's migrated to track numa_pages_migrated. The accounting of PGDEMOTE_* is moved to shrink_inactive_list() before being changed to per-cgroup. [kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst] Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Wei Xu <weixugc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-14 17:42:27 +00:00
mem_cgroup_put(memcg);
BUG_ON(!list_empty(&migratepages));
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL Currently we always take a folio reference even if migration will not even be tried or isolation failed, requiring us to grab+drop an additional reference. Further, we end up calling folio_likely_mapped_shared() while the folio might have already been unmapped, because after we dropped the PTL, that can easily happen. We want to stop touching mapcounts and friends from such context, and only call folio_likely_mapped_shared() while the folio is still mapped: mapcount information is pretty much stale and unreliable otherwise. So let's move checks into numamigrate_isolate_folio(), rename that function to migrate_misplaced_folio_prepare(), and call that function from callsites where we call migrate_misplaced_folio(), but still with the PTL held. We can now stop taking temporary folio references, and really only take a reference if folio isolation succeeded. Doing the folio_likely_mapped_shared() + folio isolation under PT lock is now similar to how we handle MADV_PAGEOUT. While at it, combine the folio_is_file_lru() checks. [david@redhat.com: fix list_del() corruption] Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 21:29:35 +00:00
return nr_remaining ? -EAGAIN : 0;
}
#endif /* CONFIG_NUMA_BALANCING */
#endif /* CONFIG_NUMA */