linux/fs/nfs/nfs3acl.c

351 lines
8.2 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/fs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
#include <linux/nfs.h>
#include <linux/nfs3.h>
#include <linux/nfs_fs.h>
#include <linux/posix_acl_xattr.h>
#include <linux/nfsacl.h>
#include "internal.h"
#include "nfs3_fs.h"
#define NFSDBG_FACILITY NFSDBG_PROC
posix_acl: Inode acl caching fixes When get_acl() is called for an inode whose ACL is not cached yet, the get_acl inode operation is called to fetch the ACL from the filesystem. The inode operation is responsible for updating the cached acl with set_cached_acl(). This is done without locking at the VFS level, so another task can call set_cached_acl() or forget_cached_acl() before the get_acl inode operation gets to calling set_cached_acl(), and then get_acl's call to set_cached_acl() results in caching an outdate ACL. Prevent this from happening by setting the cached ACL pointer to a task-specific sentinel value before calling the get_acl inode operation. Move the responsibility for updating the cached ACL from the get_acl inode operations to get_acl(). There, only set the cached ACL if the sentinel value hasn't changed. The sentinel values are chosen to have odd values. Likewise, the value of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have an even value (ACLs are aligned in memory). This allows to distinguish uncached ACLs values from ACL objects. In addition, switch from guarding inode->i_acl and inode->i_default_acl upates by the inode->i_lock spinlock to using xchg() and cmpxchg(). Filesystems that do not want ACLs returned from their get_acl inode operations to be cached must call forget_cached_acl() to prevent the VFS from doing so. (Patch written by Al Viro and Andreas Gruenbacher.) Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-24 13:38:37 +00:00
/*
* nfs3_prepare_get_acl, nfs3_complete_get_acl, nfs3_abort_get_acl: Helpers for
* caching get_acl results in a race-free way. See fs/posix_acl.c:get_acl()
* for explanations.
*/
static void nfs3_prepare_get_acl(struct posix_acl **p)
{
struct posix_acl *sentinel = uncached_acl_sentinel(current);
if (cmpxchg(p, ACL_NOT_CACHED, sentinel) != ACL_NOT_CACHED) {
/* Not the first reader or sentinel already in place. */
}
}
static void nfs3_complete_get_acl(struct posix_acl **p, struct posix_acl *acl)
{
struct posix_acl *sentinel = uncached_acl_sentinel(current);
/* Only cache the ACL if our sentinel is still in place. */
posix_acl_dup(acl);
if (cmpxchg(p, sentinel, acl) != sentinel)
posix_acl_release(acl);
}
static void nfs3_abort_get_acl(struct posix_acl **p)
{
struct posix_acl *sentinel = uncached_acl_sentinel(current);
/* Remove our sentinel upon failure. */
cmpxchg(p, sentinel, ACL_NOT_CACHED);
}
struct posix_acl *nfs3_get_acl(struct inode *inode, int type, bool rcu)
{
struct nfs_server *server = NFS_SERVER(inode);
struct page *pages[NFSACL_MAXPAGES] = { };
struct nfs3_getaclargs args = {
.fh = NFS_FH(inode),
/* The xdr layer may allocate pages here. */
.pages = pages,
};
struct nfs3_getaclres res = {
NULL,
};
struct rpc_message msg = {
.rpc_argp = &args,
.rpc_resp = &res,
};
int status, count;
if (rcu)
return ERR_PTR(-ECHILD);
if (!nfs_server_capable(inode, NFS_CAP_ACLS))
return ERR_PTR(-EOPNOTSUPP);
status = nfs_revalidate_inode(inode, NFS_INO_INVALID_CHANGE);
if (status < 0)
return ERR_PTR(status);
/*
* Only get the access acl when explicitly requested: We don't
* need it for access decisions, and only some applications use
* it. Applications which request the access acl first are not
* penalized from this optimization.
*/
if (type == ACL_TYPE_ACCESS)
args.mask |= NFS_ACLCNT|NFS_ACL;
if (S_ISDIR(inode->i_mode))
args.mask |= NFS_DFACLCNT|NFS_DFACL;
if (args.mask == 0)
return NULL;
dprintk("NFS call getacl\n");
msg.rpc_proc = &server->client_acl->cl_procinfo[ACLPROC3_GETACL];
res.fattr = nfs_alloc_fattr();
if (res.fattr == NULL)
return ERR_PTR(-ENOMEM);
posix_acl: Inode acl caching fixes When get_acl() is called for an inode whose ACL is not cached yet, the get_acl inode operation is called to fetch the ACL from the filesystem. The inode operation is responsible for updating the cached acl with set_cached_acl(). This is done without locking at the VFS level, so another task can call set_cached_acl() or forget_cached_acl() before the get_acl inode operation gets to calling set_cached_acl(), and then get_acl's call to set_cached_acl() results in caching an outdate ACL. Prevent this from happening by setting the cached ACL pointer to a task-specific sentinel value before calling the get_acl inode operation. Move the responsibility for updating the cached ACL from the get_acl inode operations to get_acl(). There, only set the cached ACL if the sentinel value hasn't changed. The sentinel values are chosen to have odd values. Likewise, the value of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have an even value (ACLs are aligned in memory). This allows to distinguish uncached ACLs values from ACL objects. In addition, switch from guarding inode->i_acl and inode->i_default_acl upates by the inode->i_lock spinlock to using xchg() and cmpxchg(). Filesystems that do not want ACLs returned from their get_acl inode operations to be cached must call forget_cached_acl() to prevent the VFS from doing so. (Patch written by Al Viro and Andreas Gruenbacher.) Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-24 13:38:37 +00:00
if (args.mask & NFS_ACL)
nfs3_prepare_get_acl(&inode->i_acl);
if (args.mask & NFS_DFACL)
nfs3_prepare_get_acl(&inode->i_default_acl);
status = rpc_call_sync(server->client_acl, &msg, 0);
dprintk("NFS reply getacl: %d\n", status);
/* pages may have been allocated at the xdr layer. */
for (count = 0; count < NFSACL_MAXPAGES && args.pages[count]; count++)
__free_page(args.pages[count]);
switch (status) {
case 0:
status = nfs_refresh_inode(inode, res.fattr);
break;
case -EPFNOSUPPORT:
case -EPROTONOSUPPORT:
dprintk("NFS_V3_ACL extension not supported; disabling\n");
server->caps &= ~NFS_CAP_ACLS;
fallthrough;
case -ENOTSUPP:
status = -EOPNOTSUPP;
goto getout;
default:
goto getout;
}
if ((args.mask & res.mask) != args.mask) {
status = -EIO;
goto getout;
}
if (res.acl_access != NULL) {
if ((posix_acl_equiv_mode(res.acl_access, NULL) == 0) ||
res.acl_access->a_count == 0) {
posix_acl_release(res.acl_access);
res.acl_access = NULL;
}
}
if (res.mask & NFS_ACL)
posix_acl: Inode acl caching fixes When get_acl() is called for an inode whose ACL is not cached yet, the get_acl inode operation is called to fetch the ACL from the filesystem. The inode operation is responsible for updating the cached acl with set_cached_acl(). This is done without locking at the VFS level, so another task can call set_cached_acl() or forget_cached_acl() before the get_acl inode operation gets to calling set_cached_acl(), and then get_acl's call to set_cached_acl() results in caching an outdate ACL. Prevent this from happening by setting the cached ACL pointer to a task-specific sentinel value before calling the get_acl inode operation. Move the responsibility for updating the cached ACL from the get_acl inode operations to get_acl(). There, only set the cached ACL if the sentinel value hasn't changed. The sentinel values are chosen to have odd values. Likewise, the value of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have an even value (ACLs are aligned in memory). This allows to distinguish uncached ACLs values from ACL objects. In addition, switch from guarding inode->i_acl and inode->i_default_acl upates by the inode->i_lock spinlock to using xchg() and cmpxchg(). Filesystems that do not want ACLs returned from their get_acl inode operations to be cached must call forget_cached_acl() to prevent the VFS from doing so. (Patch written by Al Viro and Andreas Gruenbacher.) Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-24 13:38:37 +00:00
nfs3_complete_get_acl(&inode->i_acl, res.acl_access);
else
forget_cached_acl(inode, ACL_TYPE_ACCESS);
if (res.mask & NFS_DFACL)
posix_acl: Inode acl caching fixes When get_acl() is called for an inode whose ACL is not cached yet, the get_acl inode operation is called to fetch the ACL from the filesystem. The inode operation is responsible for updating the cached acl with set_cached_acl(). This is done without locking at the VFS level, so another task can call set_cached_acl() or forget_cached_acl() before the get_acl inode operation gets to calling set_cached_acl(), and then get_acl's call to set_cached_acl() results in caching an outdate ACL. Prevent this from happening by setting the cached ACL pointer to a task-specific sentinel value before calling the get_acl inode operation. Move the responsibility for updating the cached ACL from the get_acl inode operations to get_acl(). There, only set the cached ACL if the sentinel value hasn't changed. The sentinel values are chosen to have odd values. Likewise, the value of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have an even value (ACLs are aligned in memory). This allows to distinguish uncached ACLs values from ACL objects. In addition, switch from guarding inode->i_acl and inode->i_default_acl upates by the inode->i_lock spinlock to using xchg() and cmpxchg(). Filesystems that do not want ACLs returned from their get_acl inode operations to be cached must call forget_cached_acl() to prevent the VFS from doing so. (Patch written by Al Viro and Andreas Gruenbacher.) Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-24 13:38:37 +00:00
nfs3_complete_get_acl(&inode->i_default_acl, res.acl_default);
else
forget_cached_acl(inode, ACL_TYPE_DEFAULT);
nfs_free_fattr(res.fattr);
if (type == ACL_TYPE_ACCESS) {
posix_acl_release(res.acl_default);
return res.acl_access;
} else {
posix_acl_release(res.acl_access);
return res.acl_default;
}
getout:
posix_acl: Inode acl caching fixes When get_acl() is called for an inode whose ACL is not cached yet, the get_acl inode operation is called to fetch the ACL from the filesystem. The inode operation is responsible for updating the cached acl with set_cached_acl(). This is done without locking at the VFS level, so another task can call set_cached_acl() or forget_cached_acl() before the get_acl inode operation gets to calling set_cached_acl(), and then get_acl's call to set_cached_acl() results in caching an outdate ACL. Prevent this from happening by setting the cached ACL pointer to a task-specific sentinel value before calling the get_acl inode operation. Move the responsibility for updating the cached ACL from the get_acl inode operations to get_acl(). There, only set the cached ACL if the sentinel value hasn't changed. The sentinel values are chosen to have odd values. Likewise, the value of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have an even value (ACLs are aligned in memory). This allows to distinguish uncached ACLs values from ACL objects. In addition, switch from guarding inode->i_acl and inode->i_default_acl upates by the inode->i_lock spinlock to using xchg() and cmpxchg(). Filesystems that do not want ACLs returned from their get_acl inode operations to be cached must call forget_cached_acl() to prevent the VFS from doing so. (Patch written by Al Viro and Andreas Gruenbacher.) Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-24 13:38:37 +00:00
nfs3_abort_get_acl(&inode->i_acl);
nfs3_abort_get_acl(&inode->i_default_acl);
posix_acl_release(res.acl_access);
posix_acl_release(res.acl_default);
nfs_free_fattr(res.fattr);
return ERR_PTR(status);
}
static int __nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
struct posix_acl *dfacl)
{
struct nfs_server *server = NFS_SERVER(inode);
struct nfs_fattr *fattr;
struct page *pages[NFSACL_MAXPAGES];
struct nfs3_setaclargs args = {
.inode = inode,
.mask = NFS_ACL,
.acl_access = acl,
.pages = pages,
};
struct rpc_message msg = {
.rpc_argp = &args,
.rpc_resp = &fattr,
};
int status = 0;
if (acl == NULL && (!S_ISDIR(inode->i_mode) || dfacl == NULL))
goto out;
status = -EOPNOTSUPP;
if (!nfs_server_capable(inode, NFS_CAP_ACLS))
goto out;
/* We are doing this here because XDR marshalling does not
* return any results, it BUGs. */
status = -ENOSPC;
if (acl != NULL && acl->a_count > NFS_ACL_MAX_ENTRIES)
goto out;
if (dfacl != NULL && dfacl->a_count > NFS_ACL_MAX_ENTRIES)
goto out;
if (S_ISDIR(inode->i_mode)) {
args.mask |= NFS_DFACL;
args.acl_default = dfacl;
args.len = nfsacl_size(acl, dfacl);
} else
args.len = nfsacl_size(acl, NULL);
if (args.len > NFS_ACL_INLINE_BUFSIZE) {
unsigned int npages = 1 + ((args.len - 1) >> PAGE_SHIFT);
status = -ENOMEM;
do {
args.pages[args.npages] = alloc_page(GFP_KERNEL);
if (args.pages[args.npages] == NULL)
goto out_freepages;
args.npages++;
} while (args.npages < npages);
}
dprintk("NFS call setacl\n");
status = -ENOMEM;
fattr = nfs_alloc_fattr();
if (fattr == NULL)
goto out_freepages;
msg.rpc_proc = &server->client_acl->cl_procinfo[ACLPROC3_SETACL];
msg.rpc_resp = fattr;
status = rpc_call_sync(server->client_acl, &msg, 0);
nfs_access_zap_cache(inode);
nfs_zap_acl_cache(inode);
dprintk("NFS reply setacl: %d\n", status);
switch (status) {
case 0:
status = nfs_refresh_inode(inode, fattr);
break;
case -EPFNOSUPPORT:
case -EPROTONOSUPPORT:
dprintk("NFS_V3_ACL SETACL RPC not supported"
"(will not retry)\n");
server->caps &= ~NFS_CAP_ACLS;
fallthrough;
case -ENOTSUPP:
status = -EOPNOTSUPP;
}
nfs_free_fattr(fattr);
out_freepages:
while (args.npages != 0) {
args.npages--;
__free_page(args.pages[args.npages]);
}
out:
return status;
}
int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
struct posix_acl *dfacl)
{
int ret;
ret = __nfs3_proc_setacls(inode, acl, dfacl);
return (ret == -EOPNOTSUPP) ? 0 : ret;
}
fs: pass dentry to set acl method The current way of setting and getting posix acls through the generic xattr interface is error prone and type unsafe. The vfs needs to interpret and fixup posix acls before storing or reporting it to userspace. Various hacks exist to make this work. The code is hard to understand and difficult to maintain in it's current form. Instead of making this work by hacking posix acls through xattr handlers we are building a dedicated posix acl api around the get and set inode operations. This removes a lot of hackiness and makes the codepaths easier to maintain. A lot of background can be found in [1]. Since some filesystem rely on the dentry being available to them when setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode operation. But since ->set_acl() is required in order to use the generic posix acl xattr handlers filesystems that do not implement this inode operation cannot use the handler and need to implement their own dedicated posix acl handlers. Update the ->set_acl() inode method to take a dentry argument. This allows all filesystems to rely on ->set_acl(). As far as I can tell all codepaths can be switched to rely on the dentry instead of just the inode. Note that the original motivation for passing the dentry separate from the inode instead of just the dentry in the xattr handlers was because of security modules that call security_d_instantiate(). This hook is called during d_instantiate_new(), d_add(), __d_instantiate_anon(), and d_splice_alias() to initialize the inode's security context and possibly to set security.* xattrs. Since this only affects security.* xattrs this is completely irrelevant for posix acls. Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1] Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-09-23 08:29:39 +00:00
int nfs3_set_acl(struct user_namespace *mnt_userns, struct dentry *dentry,
struct posix_acl *acl, int type)
{
struct posix_acl *orig = acl, *dfacl = NULL, *alloc;
fs: pass dentry to set acl method The current way of setting and getting posix acls through the generic xattr interface is error prone and type unsafe. The vfs needs to interpret and fixup posix acls before storing or reporting it to userspace. Various hacks exist to make this work. The code is hard to understand and difficult to maintain in it's current form. Instead of making this work by hacking posix acls through xattr handlers we are building a dedicated posix acl api around the get and set inode operations. This removes a lot of hackiness and makes the codepaths easier to maintain. A lot of background can be found in [1]. Since some filesystem rely on the dentry being available to them when setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode operation. But since ->set_acl() is required in order to use the generic posix acl xattr handlers filesystems that do not implement this inode operation cannot use the handler and need to implement their own dedicated posix acl handlers. Update the ->set_acl() inode method to take a dentry argument. This allows all filesystems to rely on ->set_acl(). As far as I can tell all codepaths can be switched to rely on the dentry instead of just the inode. Note that the original motivation for passing the dentry separate from the inode instead of just the dentry in the xattr handlers was because of security modules that call security_d_instantiate(). This hook is called during d_instantiate_new(), d_add(), __d_instantiate_anon(), and d_splice_alias() to initialize the inode's security context and possibly to set security.* xattrs. Since this only affects security.* xattrs this is completely irrelevant for posix acls. Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1] Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-09-23 08:29:39 +00:00
struct inode *inode = d_inode(dentry);
int status;
if (S_ISDIR(inode->i_mode)) {
switch(type) {
case ACL_TYPE_ACCESS:
fs: rename current get acl method The current way of setting and getting posix acls through the generic xattr interface is error prone and type unsafe. The vfs needs to interpret and fixup posix acls before storing or reporting it to userspace. Various hacks exist to make this work. The code is hard to understand and difficult to maintain in it's current form. Instead of making this work by hacking posix acls through xattr handlers we are building a dedicated posix acl api around the get and set inode operations. This removes a lot of hackiness and makes the codepaths easier to maintain. A lot of background can be found in [1]. The current inode operation for getting posix acls takes an inode argument but various filesystems (e.g., 9p, cifs, overlayfs) need access to the dentry. In contrast to the ->set_acl() inode operation we cannot simply extend ->get_acl() to take a dentry argument. The ->get_acl() inode operation is called from: acl_permission_check() -> check_acl() -> get_acl() which is part of generic_permission() which in turn is part of inode_permission(). Both generic_permission() and inode_permission() are called in the ->permission() handler of various filesystems (e.g., overlayfs). So simply passing a dentry argument to ->get_acl() would amount to also having to pass a dentry argument to ->permission(). We should avoid this unnecessary change. So instead of extending the existing inode operation rename it from ->get_acl() to ->get_inode_acl() and add a ->get_acl() method later that passes a dentry argument and which filesystems that need access to the dentry can implement instead of ->get_inode_acl(). Filesystems like cifs which allow setting and getting posix acls but not using them for permission checking during lookup can simply not implement ->get_inode_acl(). This is intended to be a non-functional change. Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1] Suggested-by/Inspired-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-09-22 15:17:00 +00:00
alloc = get_inode_acl(inode, ACL_TYPE_DEFAULT);
if (IS_ERR(alloc))
goto fail;
dfacl = alloc;
break;
case ACL_TYPE_DEFAULT:
fs: rename current get acl method The current way of setting and getting posix acls through the generic xattr interface is error prone and type unsafe. The vfs needs to interpret and fixup posix acls before storing or reporting it to userspace. Various hacks exist to make this work. The code is hard to understand and difficult to maintain in it's current form. Instead of making this work by hacking posix acls through xattr handlers we are building a dedicated posix acl api around the get and set inode operations. This removes a lot of hackiness and makes the codepaths easier to maintain. A lot of background can be found in [1]. The current inode operation for getting posix acls takes an inode argument but various filesystems (e.g., 9p, cifs, overlayfs) need access to the dentry. In contrast to the ->set_acl() inode operation we cannot simply extend ->get_acl() to take a dentry argument. The ->get_acl() inode operation is called from: acl_permission_check() -> check_acl() -> get_acl() which is part of generic_permission() which in turn is part of inode_permission(). Both generic_permission() and inode_permission() are called in the ->permission() handler of various filesystems (e.g., overlayfs). So simply passing a dentry argument to ->get_acl() would amount to also having to pass a dentry argument to ->permission(). We should avoid this unnecessary change. So instead of extending the existing inode operation rename it from ->get_acl() to ->get_inode_acl() and add a ->get_acl() method later that passes a dentry argument and which filesystems that need access to the dentry can implement instead of ->get_inode_acl(). Filesystems like cifs which allow setting and getting posix acls but not using them for permission checking during lookup can simply not implement ->get_inode_acl(). This is intended to be a non-functional change. Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1] Suggested-by/Inspired-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-09-22 15:17:00 +00:00
alloc = get_inode_acl(inode, ACL_TYPE_ACCESS);
if (IS_ERR(alloc))
goto fail;
dfacl = acl;
acl = alloc;
break;
}
}
if (acl == NULL) {
alloc = posix_acl_from_mode(inode->i_mode, GFP_KERNEL);
if (IS_ERR(alloc))
goto fail;
acl = alloc;
}
status = __nfs3_proc_setacls(inode, acl, dfacl);
out:
if (acl != orig)
posix_acl_release(acl);
if (dfacl != orig)
posix_acl_release(dfacl);
return status;
fail:
status = PTR_ERR(alloc);
goto out;
}
const struct xattr_handler *nfs3_xattr_handlers[] = {
&posix_acl_access_xattr_handler,
&posix_acl_default_xattr_handler,
NULL,
};
static int
nfs3_list_one_acl(struct inode *inode, int type, const char *name, void *data,
size_t size, ssize_t *result)
{
struct posix_acl *acl;
char *p = data + *result;
fs: rename current get acl method The current way of setting and getting posix acls through the generic xattr interface is error prone and type unsafe. The vfs needs to interpret and fixup posix acls before storing or reporting it to userspace. Various hacks exist to make this work. The code is hard to understand and difficult to maintain in it's current form. Instead of making this work by hacking posix acls through xattr handlers we are building a dedicated posix acl api around the get and set inode operations. This removes a lot of hackiness and makes the codepaths easier to maintain. A lot of background can be found in [1]. The current inode operation for getting posix acls takes an inode argument but various filesystems (e.g., 9p, cifs, overlayfs) need access to the dentry. In contrast to the ->set_acl() inode operation we cannot simply extend ->get_acl() to take a dentry argument. The ->get_acl() inode operation is called from: acl_permission_check() -> check_acl() -> get_acl() which is part of generic_permission() which in turn is part of inode_permission(). Both generic_permission() and inode_permission() are called in the ->permission() handler of various filesystems (e.g., overlayfs). So simply passing a dentry argument to ->get_acl() would amount to also having to pass a dentry argument to ->permission(). We should avoid this unnecessary change. So instead of extending the existing inode operation rename it from ->get_acl() to ->get_inode_acl() and add a ->get_acl() method later that passes a dentry argument and which filesystems that need access to the dentry can implement instead of ->get_inode_acl(). Filesystems like cifs which allow setting and getting posix acls but not using them for permission checking during lookup can simply not implement ->get_inode_acl(). This is intended to be a non-functional change. Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1] Suggested-by/Inspired-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-09-22 15:17:00 +00:00
acl = get_inode_acl(inode, type);
if (IS_ERR_OR_NULL(acl))
return 0;
posix_acl_release(acl);
*result += strlen(name);
*result += 1;
if (!size)
return 0;
if (*result > size)
return -ERANGE;
strcpy(p, name);
return 0;
}
ssize_t
nfs3_listxattr(struct dentry *dentry, char *data, size_t size)
{
struct inode *inode = d_inode(dentry);
ssize_t result = 0;
int error;
error = nfs3_list_one_acl(inode, ACL_TYPE_ACCESS,
XATTR_NAME_POSIX_ACL_ACCESS, data, size, &result);
if (error)
return error;
error = nfs3_list_one_acl(inode, ACL_TYPE_DEFAULT,
XATTR_NAME_POSIX_ACL_DEFAULT, data, size, &result);
if (error)
return error;
return result;
}