2019-06-01 08:08:46 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2007-05-05 18:45:53 +00:00
|
|
|
/*
|
|
|
|
* mac80211 configuration hooks for cfg80211
|
|
|
|
*
|
2010-02-15 10:53:10 +00:00
|
|
|
* Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
|
2015-06-01 20:54:13 +00:00
|
|
|
* Copyright 2013-2015 Intel Mobile Communications GmbH
|
mac80211: reject/clear user rate mask if not usable
If the user rate mask results in no (basic) rates being usable,
clear it. Also, if we're already operating when it's set, reject
it instead.
Technically, selecting basic rates as the criterion is a bit too
restrictive, but calculating the usable rates over all stations
(e.g. in AP mode) is harder, and all stations must support the
basic rates. Similarly, in client mode, the basic rates will be
used anyway for control frames.
This fixes the "no supported rates (...) in rate_mask ..." warning
that occurs on TX when you've selected a rate mask that's not
compatible with the connection (e.g. an AP that enables only the
rates 36, 48, 54 and you've selected only 6, 9, 12.)
Reported-by: Kirtika Ruchandani <kirtika@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-08 10:12:10 +00:00
|
|
|
* Copyright (C) 2015-2017 Intel Deutschland GmbH
|
2020-01-31 11:12:55 +00:00
|
|
|
* Copyright (C) 2018-2020 Intel Corporation
|
2007-05-05 18:45:53 +00:00
|
|
|
*/
|
|
|
|
|
2007-12-19 01:03:30 +00:00
|
|
|
#include <linux/ieee80211.h>
|
2007-05-05 18:45:53 +00:00
|
|
|
#include <linux/nl80211.h>
|
|
|
|
#include <linux/rtnetlink.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
|
|
|
#include <linux/slab.h>
|
2007-09-17 18:56:21 +00:00
|
|
|
#include <net/net_namespace.h>
|
2007-12-19 01:03:33 +00:00
|
|
|
#include <linux/rcupdate.h>
|
2019-06-12 16:19:54 +00:00
|
|
|
#include <linux/fips.h>
|
2011-09-28 11:12:52 +00:00
|
|
|
#include <linux/if_ether.h>
|
2007-05-05 18:45:53 +00:00
|
|
|
#include <net/cfg80211.h>
|
|
|
|
#include "ieee80211_i.h"
|
2009-04-23 16:52:52 +00:00
|
|
|
#include "driver-ops.h"
|
2008-04-08 19:14:40 +00:00
|
|
|
#include "rate.h"
|
2008-02-23 14:17:17 +00:00
|
|
|
#include "mesh.h"
|
2014-10-07 07:38:50 +00:00
|
|
|
#include "wme.h"
|
2008-02-23 14:17:17 +00:00
|
|
|
|
2017-04-12 10:36:31 +00:00
|
|
|
static void ieee80211_set_mu_mimo_follow(struct ieee80211_sub_if_data *sdata,
|
|
|
|
struct vif_params *params)
|
2017-04-12 08:46:13 +00:00
|
|
|
{
|
|
|
|
bool mu_mimo_groups = false;
|
|
|
|
bool mu_mimo_follow = false;
|
|
|
|
|
|
|
|
if (params->vht_mumimo_groups) {
|
|
|
|
u64 membership;
|
|
|
|
|
|
|
|
BUILD_BUG_ON(sizeof(membership) != WLAN_MEMBERSHIP_LEN);
|
|
|
|
|
2017-04-12 10:36:31 +00:00
|
|
|
memcpy(sdata->vif.bss_conf.mu_group.membership,
|
2017-04-12 08:46:13 +00:00
|
|
|
params->vht_mumimo_groups, WLAN_MEMBERSHIP_LEN);
|
2017-04-12 10:36:31 +00:00
|
|
|
memcpy(sdata->vif.bss_conf.mu_group.position,
|
2017-04-12 08:46:13 +00:00
|
|
|
params->vht_mumimo_groups + WLAN_MEMBERSHIP_LEN,
|
|
|
|
WLAN_USER_POSITION_LEN);
|
2017-04-12 10:36:31 +00:00
|
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_MU_GROUPS);
|
2017-04-12 08:46:13 +00:00
|
|
|
/* don't care about endianness - just check for 0 */
|
|
|
|
memcpy(&membership, params->vht_mumimo_groups,
|
|
|
|
WLAN_MEMBERSHIP_LEN);
|
|
|
|
mu_mimo_groups = membership != 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (params->vht_mumimo_follow_addr) {
|
|
|
|
mu_mimo_follow =
|
|
|
|
is_valid_ether_addr(params->vht_mumimo_follow_addr);
|
2017-04-12 10:36:31 +00:00
|
|
|
ether_addr_copy(sdata->u.mntr.mu_follow_addr,
|
2017-04-12 08:46:13 +00:00
|
|
|
params->vht_mumimo_follow_addr);
|
|
|
|
}
|
|
|
|
|
2017-04-12 10:36:31 +00:00
|
|
|
sdata->vif.mu_mimo_owner = mu_mimo_groups || mu_mimo_follow;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_set_mon_options(struct ieee80211_sub_if_data *sdata,
|
|
|
|
struct vif_params *params)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
struct ieee80211_sub_if_data *monitor_sdata;
|
|
|
|
|
|
|
|
/* check flags first */
|
|
|
|
if (params->flags && ieee80211_sdata_running(sdata)) {
|
|
|
|
u32 mask = MONITOR_FLAG_COOK_FRAMES | MONITOR_FLAG_ACTIVE;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Prohibit MONITOR_FLAG_COOK_FRAMES and
|
|
|
|
* MONITOR_FLAG_ACTIVE to be changed while the
|
|
|
|
* interface is up.
|
|
|
|
* Else we would need to add a lot of cruft
|
|
|
|
* to update everything:
|
|
|
|
* cooked_mntrs, monitor and all fif_* counters
|
|
|
|
* reconfigure hardware
|
|
|
|
*/
|
|
|
|
if ((params->flags & mask) != (sdata->u.mntr.flags & mask))
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* also validate MU-MIMO change */
|
|
|
|
monitor_sdata = rtnl_dereference(local->monitor_sdata);
|
|
|
|
|
|
|
|
if (!monitor_sdata &&
|
|
|
|
(params->vht_mumimo_groups || params->vht_mumimo_follow_addr))
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
/* apply all changes now - no failures allowed */
|
|
|
|
|
|
|
|
if (monitor_sdata)
|
|
|
|
ieee80211_set_mu_mimo_follow(monitor_sdata, params);
|
|
|
|
|
|
|
|
if (params->flags) {
|
|
|
|
if (ieee80211_sdata_running(sdata)) {
|
|
|
|
ieee80211_adjust_monitor_flags(sdata, -1);
|
|
|
|
sdata->u.mntr.flags = params->flags;
|
|
|
|
ieee80211_adjust_monitor_flags(sdata, 1);
|
|
|
|
|
|
|
|
ieee80211_configure_filter(local);
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* Because the interface is down, ieee80211_do_stop
|
|
|
|
* and ieee80211_do_open take care of "everything"
|
|
|
|
* mentioned in the comment above.
|
|
|
|
*/
|
|
|
|
sdata->u.mntr.flags = params->flags;
|
|
|
|
}
|
|
|
|
}
|
2017-04-12 08:46:13 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-09-19 07:26:06 +00:00
|
|
|
static struct wireless_dev *ieee80211_add_iface(struct wiphy *wiphy,
|
|
|
|
const char *name,
|
2015-03-18 10:13:39 +00:00
|
|
|
unsigned char name_assign_type,
|
2012-06-15 22:00:26 +00:00
|
|
|
enum nl80211_iftype type,
|
|
|
|
struct vif_params *params)
|
2007-05-05 18:45:53 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2012-06-15 22:00:26 +00:00
|
|
|
struct wireless_dev *wdev;
|
2008-01-31 18:48:23 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
int err;
|
2007-05-05 18:45:53 +00:00
|
|
|
|
2015-03-18 10:13:39 +00:00
|
|
|
err = ieee80211_if_add(local, name, name_assign_type, &wdev, type, params);
|
2010-12-03 08:20:42 +00:00
|
|
|
if (err)
|
|
|
|
return ERR_PTR(err);
|
2008-01-31 18:48:23 +00:00
|
|
|
|
2017-04-12 08:46:13 +00:00
|
|
|
sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
|
|
|
|
|
|
if (type == NL80211_IFTYPE_MONITOR) {
|
2017-04-12 10:36:31 +00:00
|
|
|
err = ieee80211_set_mon_options(sdata, params);
|
2017-04-12 08:46:13 +00:00
|
|
|
if (err) {
|
|
|
|
ieee80211_if_remove(sdata);
|
|
|
|
return NULL;
|
|
|
|
}
|
2010-12-03 08:20:42 +00:00
|
|
|
}
|
|
|
|
|
2012-06-15 22:00:26 +00:00
|
|
|
return wdev;
|
2007-05-05 18:45:53 +00:00
|
|
|
}
|
|
|
|
|
2012-06-15 22:00:26 +00:00
|
|
|
static int ieee80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev)
|
2007-05-05 18:45:53 +00:00
|
|
|
{
|
2012-06-15 22:00:26 +00:00
|
|
|
ieee80211_if_remove(IEEE80211_WDEV_TO_SUB_IF(wdev));
|
2007-05-05 18:45:53 +00:00
|
|
|
|
2008-07-09 12:40:35 +00:00
|
|
|
return 0;
|
2007-05-05 18:45:53 +00:00
|
|
|
}
|
|
|
|
|
2009-06-09 19:04:43 +00:00
|
|
|
static int ieee80211_change_iface(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
2017-04-12 09:23:28 +00:00
|
|
|
enum nl80211_iftype type,
|
2008-02-23 14:17:06 +00:00
|
|
|
struct vif_params *params)
|
2007-09-28 19:52:27 +00:00
|
|
|
{
|
2009-12-23 12:15:31 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2008-07-09 12:40:36 +00:00
|
|
|
int ret;
|
2007-09-28 19:52:27 +00:00
|
|
|
|
2008-09-10 22:01:58 +00:00
|
|
|
ret = ieee80211_if_change_type(sdata, type);
|
2008-07-09 12:40:36 +00:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
2007-09-28 19:52:27 +00:00
|
|
|
|
2018-08-31 08:31:05 +00:00
|
|
|
if (type == NL80211_IFTYPE_AP_VLAN && params->use_4addr == 0) {
|
2011-08-01 16:19:00 +00:00
|
|
|
RCU_INIT_POINTER(sdata->u.vlan.sta, NULL);
|
2016-03-31 17:02:10 +00:00
|
|
|
ieee80211_check_fast_rx_iface(sdata);
|
2018-08-31 08:31:05 +00:00
|
|
|
} else if (type == NL80211_IFTYPE_STATION && params->use_4addr >= 0) {
|
2009-11-19 10:55:19 +00:00
|
|
|
sdata->u.mgd.use_4addr = params->use_4addr;
|
2016-03-31 17:02:10 +00:00
|
|
|
}
|
2009-11-19 10:55:19 +00:00
|
|
|
|
2016-08-29 20:25:16 +00:00
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
|
2017-04-12 10:36:31 +00:00
|
|
|
ret = ieee80211_set_mon_options(sdata, params);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2010-10-02 11:17:07 +00:00
|
|
|
}
|
2010-04-26 22:26:34 +00:00
|
|
|
|
2007-09-28 19:52:27 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-06-18 18:07:15 +00:00
|
|
|
static int ieee80211_start_p2p_device(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev)
|
|
|
|
{
|
2014-02-27 09:07:21 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
mutex_lock(&sdata->local->chanctx_mtx);
|
|
|
|
ret = ieee80211_check_combinations(sdata, NULL, 0, 0);
|
|
|
|
mutex_unlock(&sdata->local->chanctx_mtx);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2012-06-18 18:07:15 +00:00
|
|
|
return ieee80211_do_open(wdev, true);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ieee80211_stop_p2p_device(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev)
|
|
|
|
{
|
|
|
|
ieee80211_sdata_stop(IEEE80211_WDEV_TO_SUB_IF(wdev));
|
|
|
|
}
|
|
|
|
|
2016-09-20 14:31:14 +00:00
|
|
|
static int ieee80211_start_nan(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev,
|
|
|
|
struct cfg80211_nan_conf *conf)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
mutex_lock(&sdata->local->chanctx_mtx);
|
|
|
|
ret = ieee80211_check_combinations(sdata, NULL, 0, 0);
|
|
|
|
mutex_unlock(&sdata->local->chanctx_mtx);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = ieee80211_do_open(wdev, true);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = drv_start_nan(sdata->local, sdata, conf);
|
|
|
|
if (ret)
|
|
|
|
ieee80211_sdata_stop(sdata);
|
|
|
|
|
2016-09-20 14:31:20 +00:00
|
|
|
sdata->u.nan.conf = *conf;
|
|
|
|
|
2016-09-20 14:31:14 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ieee80211_stop_nan(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
|
|
|
|
|
|
drv_stop_nan(sdata->local, sdata);
|
|
|
|
ieee80211_sdata_stop(sdata);
|
|
|
|
}
|
|
|
|
|
2016-09-20 14:31:19 +00:00
|
|
|
static int ieee80211_nan_change_conf(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev,
|
|
|
|
struct cfg80211_nan_conf *conf,
|
|
|
|
u32 changes)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
|
|
struct cfg80211_nan_conf new_conf;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (sdata->vif.type != NL80211_IFTYPE_NAN)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
if (!ieee80211_sdata_running(sdata))
|
|
|
|
return -ENETDOWN;
|
|
|
|
|
|
|
|
new_conf = sdata->u.nan.conf;
|
|
|
|
|
|
|
|
if (changes & CFG80211_NAN_CONF_CHANGED_PREF)
|
|
|
|
new_conf.master_pref = conf->master_pref;
|
|
|
|
|
2017-02-08 13:00:34 +00:00
|
|
|
if (changes & CFG80211_NAN_CONF_CHANGED_BANDS)
|
|
|
|
new_conf.bands = conf->bands;
|
2016-09-20 14:31:19 +00:00
|
|
|
|
|
|
|
ret = drv_nan_change_conf(sdata->local, sdata, &new_conf, changes);
|
|
|
|
if (!ret)
|
|
|
|
sdata->u.nan.conf = new_conf;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2016-09-20 14:31:20 +00:00
|
|
|
static int ieee80211_add_nan_func(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev,
|
|
|
|
struct cfg80211_nan_func *nan_func)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (sdata->vif.type != NL80211_IFTYPE_NAN)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
if (!ieee80211_sdata_running(sdata))
|
|
|
|
return -ENETDOWN;
|
|
|
|
|
|
|
|
spin_lock_bh(&sdata->u.nan.func_lock);
|
|
|
|
|
|
|
|
ret = idr_alloc(&sdata->u.nan.function_inst_ids,
|
|
|
|
nan_func, 1, sdata->local->hw.max_nan_de_entries + 1,
|
|
|
|
GFP_ATOMIC);
|
|
|
|
spin_unlock_bh(&sdata->u.nan.func_lock);
|
|
|
|
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
nan_func->instance_id = ret;
|
|
|
|
|
|
|
|
WARN_ON(nan_func->instance_id == 0);
|
|
|
|
|
|
|
|
ret = drv_add_nan_func(sdata->local, sdata, nan_func);
|
|
|
|
if (ret) {
|
|
|
|
spin_lock_bh(&sdata->u.nan.func_lock);
|
|
|
|
idr_remove(&sdata->u.nan.function_inst_ids,
|
|
|
|
nan_func->instance_id);
|
|
|
|
spin_unlock_bh(&sdata->u.nan.func_lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct cfg80211_nan_func *
|
|
|
|
ieee80211_find_nan_func_by_cookie(struct ieee80211_sub_if_data *sdata,
|
|
|
|
u64 cookie)
|
|
|
|
{
|
|
|
|
struct cfg80211_nan_func *func;
|
|
|
|
int id;
|
|
|
|
|
|
|
|
lockdep_assert_held(&sdata->u.nan.func_lock);
|
|
|
|
|
|
|
|
idr_for_each_entry(&sdata->u.nan.function_inst_ids, func, id) {
|
|
|
|
if (func->cookie == cookie)
|
|
|
|
return func;
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ieee80211_del_nan_func(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev, u64 cookie)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
|
|
struct cfg80211_nan_func *func;
|
|
|
|
u8 instance_id = 0;
|
|
|
|
|
|
|
|
if (sdata->vif.type != NL80211_IFTYPE_NAN ||
|
|
|
|
!ieee80211_sdata_running(sdata))
|
|
|
|
return;
|
|
|
|
|
|
|
|
spin_lock_bh(&sdata->u.nan.func_lock);
|
|
|
|
|
|
|
|
func = ieee80211_find_nan_func_by_cookie(sdata, cookie);
|
|
|
|
if (func)
|
|
|
|
instance_id = func->instance_id;
|
|
|
|
|
|
|
|
spin_unlock_bh(&sdata->u.nan.func_lock);
|
|
|
|
|
|
|
|
if (instance_id)
|
|
|
|
drv_del_nan_func(sdata->local, sdata, instance_id);
|
|
|
|
}
|
|
|
|
|
2011-11-18 13:20:44 +00:00
|
|
|
static int ieee80211_set_noack_map(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
u16 noack_map)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
sdata->noack_map = noack_map;
|
2015-03-21 14:25:43 +00:00
|
|
|
|
|
|
|
ieee80211_check_fast_xmit_iface(sdata);
|
|
|
|
|
2011-11-18 13:20:44 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-03-19 20:34:08 +00:00
|
|
|
static int ieee80211_set_tx(struct ieee80211_sub_if_data *sdata,
|
|
|
|
const u8 *mac_addr, u8 key_idx)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
struct ieee80211_key *key;
|
|
|
|
struct sta_info *sta;
|
|
|
|
int ret = -EINVAL;
|
|
|
|
|
|
|
|
if (!wiphy_ext_feature_isset(local->hw.wiphy,
|
|
|
|
NL80211_EXT_FEATURE_EXT_KEY_ID))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
sta = sta_info_get_bss(sdata, mac_addr);
|
|
|
|
|
|
|
|
if (!sta)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (sta->ptk_idx == key_idx)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
mutex_lock(&local->key_mtx);
|
|
|
|
key = key_mtx_dereference(local, sta->ptk[key_idx]);
|
|
|
|
|
|
|
|
if (key && key->conf.flags & IEEE80211_KEY_FLAG_NO_AUTO_TX)
|
|
|
|
ret = ieee80211_set_tx_key(key);
|
|
|
|
|
|
|
|
mutex_unlock(&local->key_mtx);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2007-12-19 01:03:30 +00:00
|
|
|
static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
|
2010-10-05 17:39:30 +00:00
|
|
|
u8 key_idx, bool pairwise, const u8 *mac_addr,
|
2007-12-19 01:03:30 +00:00
|
|
|
struct key_params *params)
|
|
|
|
{
|
2010-08-27 10:35:55 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2013-03-24 12:23:27 +00:00
|
|
|
struct ieee80211_local *local = sdata->local;
|
2007-12-19 01:03:30 +00:00
|
|
|
struct sta_info *sta = NULL;
|
2013-03-24 12:23:27 +00:00
|
|
|
const struct ieee80211_cipher_scheme *cs = NULL;
|
2008-02-25 15:27:45 +00:00
|
|
|
struct ieee80211_key *key;
|
2008-04-08 15:56:52 +00:00
|
|
|
int err;
|
2007-12-19 01:03:30 +00:00
|
|
|
|
2010-08-27 10:35:55 +00:00
|
|
|
if (!ieee80211_sdata_running(sdata))
|
2010-06-01 08:19:19 +00:00
|
|
|
return -ENETDOWN;
|
|
|
|
|
2019-03-19 20:34:08 +00:00
|
|
|
if (pairwise && params->mode == NL80211_KEY_SET_TX)
|
|
|
|
return ieee80211_set_tx(sdata, mac_addr, key_idx);
|
|
|
|
|
2010-08-10 07:46:38 +00:00
|
|
|
/* reject WEP and TKIP keys if WEP failed to initialize */
|
2007-12-19 01:03:30 +00:00
|
|
|
switch (params->cipher) {
|
|
|
|
case WLAN_CIPHER_SUITE_WEP40:
|
|
|
|
case WLAN_CIPHER_SUITE_TKIP:
|
2010-08-10 07:46:38 +00:00
|
|
|
case WLAN_CIPHER_SUITE_WEP104:
|
2019-06-12 16:19:54 +00:00
|
|
|
if (WARN_ON_ONCE(fips_enabled))
|
2010-08-10 07:46:38 +00:00
|
|
|
return -EINVAL;
|
2013-03-24 12:23:27 +00:00
|
|
|
case WLAN_CIPHER_SUITE_CCMP:
|
2015-01-24 17:52:07 +00:00
|
|
|
case WLAN_CIPHER_SUITE_CCMP_256:
|
2013-03-24 12:23:27 +00:00
|
|
|
case WLAN_CIPHER_SUITE_AES_CMAC:
|
2015-01-24 17:52:08 +00:00
|
|
|
case WLAN_CIPHER_SUITE_BIP_CMAC_256:
|
2015-01-24 17:52:09 +00:00
|
|
|
case WLAN_CIPHER_SUITE_BIP_GMAC_128:
|
|
|
|
case WLAN_CIPHER_SUITE_BIP_GMAC_256:
|
2013-03-24 12:23:27 +00:00
|
|
|
case WLAN_CIPHER_SUITE_GCMP:
|
2015-01-24 17:52:06 +00:00
|
|
|
case WLAN_CIPHER_SUITE_GCMP_256:
|
2013-03-24 12:23:27 +00:00
|
|
|
break;
|
2007-12-19 01:03:30 +00:00
|
|
|
default:
|
2013-03-24 12:23:27 +00:00
|
|
|
cs = ieee80211_cs_get(local, params->cipher, sdata->vif.type);
|
2010-08-10 07:46:38 +00:00
|
|
|
break;
|
2007-12-19 01:03:30 +00:00
|
|
|
}
|
|
|
|
|
2010-08-10 07:46:38 +00:00
|
|
|
key = ieee80211_key_alloc(params->cipher, key_idx, params->key_len,
|
2013-03-24 12:23:27 +00:00
|
|
|
params->key, params->seq_len, params->seq,
|
|
|
|
cs);
|
2010-08-01 16:37:03 +00:00
|
|
|
if (IS_ERR(key))
|
|
|
|
return PTR_ERR(key);
|
2008-02-25 15:27:45 +00:00
|
|
|
|
2010-10-05 17:39:30 +00:00
|
|
|
if (pairwise)
|
|
|
|
key->conf.flags |= IEEE80211_KEY_FLAG_PAIRWISE;
|
|
|
|
|
2019-03-19 20:34:08 +00:00
|
|
|
if (params->mode == NL80211_KEY_NO_TX)
|
|
|
|
key->conf.flags |= IEEE80211_KEY_FLAG_NO_AUTO_TX;
|
|
|
|
|
2013-03-24 12:23:27 +00:00
|
|
|
mutex_lock(&local->sta_mtx);
|
2008-04-08 15:56:52 +00:00
|
|
|
|
2007-12-19 01:03:30 +00:00
|
|
|
if (mac_addr) {
|
2016-10-04 13:32:16 +00:00
|
|
|
sta = sta_info_get_bss(sdata, mac_addr);
|
2013-01-11 13:34:25 +00:00
|
|
|
/*
|
|
|
|
* The ASSOC test makes sure the driver is ready to
|
|
|
|
* receive the key. When wpa_supplicant has roamed
|
|
|
|
* using FT, it attempts to set the key before
|
|
|
|
* association has completed, this rejects that attempt
|
2014-10-30 05:55:58 +00:00
|
|
|
* so it will set the key again after association.
|
2013-01-11 13:34:25 +00:00
|
|
|
*
|
|
|
|
* TODO: accept the key if we have a station entry and
|
|
|
|
* add it to the device after the station.
|
|
|
|
*/
|
|
|
|
if (!sta || !test_sta_flag(sta, WLAN_STA_ASSOC)) {
|
2013-03-06 21:53:52 +00:00
|
|
|
ieee80211_key_free_unused(key);
|
2008-04-08 15:56:52 +00:00
|
|
|
err = -ENOENT;
|
|
|
|
goto out_unlock;
|
2008-02-25 15:27:45 +00:00
|
|
|
}
|
2007-12-19 01:03:30 +00:00
|
|
|
}
|
|
|
|
|
2012-09-04 15:08:23 +00:00
|
|
|
switch (sdata->vif.type) {
|
|
|
|
case NL80211_IFTYPE_STATION:
|
|
|
|
if (sdata->u.mgd.mfp != IEEE80211_MFP_DISABLED)
|
|
|
|
key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT;
|
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_AP:
|
|
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
|
|
/* Keys without a station are used for TX only */
|
2018-09-29 14:01:58 +00:00
|
|
|
if (sta && test_sta_flag(sta, WLAN_STA_MFP))
|
2012-09-04 15:08:23 +00:00
|
|
|
key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT;
|
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_ADHOC:
|
|
|
|
/* no MFP (yet) */
|
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
|
|
if (sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE)
|
|
|
|
key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT;
|
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
case NL80211_IFTYPE_WDS:
|
|
|
|
case NL80211_IFTYPE_MONITOR:
|
|
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
2016-09-20 14:31:13 +00:00
|
|
|
case NL80211_IFTYPE_NAN:
|
2012-09-04 15:08:23 +00:00
|
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
|
|
|
case NUM_NL80211_IFTYPES:
|
|
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
|
|
case NL80211_IFTYPE_P2P_GO:
|
2014-11-03 09:33:18 +00:00
|
|
|
case NL80211_IFTYPE_OCB:
|
2012-09-04 15:08:23 +00:00
|
|
|
/* shouldn't happen */
|
|
|
|
WARN_ON_ONCE(1);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2013-03-24 12:23:27 +00:00
|
|
|
if (sta)
|
|
|
|
sta->cipher_scheme = cs;
|
|
|
|
|
2010-08-27 11:26:52 +00:00
|
|
|
err = ieee80211_key_link(key, sdata, sta);
|
2008-02-25 15:27:45 +00:00
|
|
|
|
2008-04-08 15:56:52 +00:00
|
|
|
out_unlock:
|
2013-03-24 12:23:27 +00:00
|
|
|
mutex_unlock(&local->sta_mtx);
|
2008-04-08 15:56:52 +00:00
|
|
|
|
|
|
|
return err;
|
2007-12-19 01:03:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
|
2010-10-05 17:39:30 +00:00
|
|
|
u8 key_idx, bool pairwise, const u8 *mac_addr)
|
2007-12-19 01:03:30 +00:00
|
|
|
{
|
2011-05-12 12:31:49 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_local *local = sdata->local;
|
2007-12-19 01:03:30 +00:00
|
|
|
struct sta_info *sta;
|
2011-05-12 12:31:49 +00:00
|
|
|
struct ieee80211_key *key = NULL;
|
2007-12-19 01:03:30 +00:00
|
|
|
int ret;
|
|
|
|
|
2011-05-12 12:31:49 +00:00
|
|
|
mutex_lock(&local->sta_mtx);
|
|
|
|
mutex_lock(&local->key_mtx);
|
2008-04-08 15:56:52 +00:00
|
|
|
|
2007-12-19 01:03:30 +00:00
|
|
|
if (mac_addr) {
|
2008-04-08 15:56:52 +00:00
|
|
|
ret = -ENOENT;
|
|
|
|
|
2010-01-08 17:10:58 +00:00
|
|
|
sta = sta_info_get_bss(sdata, mac_addr);
|
2007-12-19 01:03:30 +00:00
|
|
|
if (!sta)
|
2008-04-08 15:56:52 +00:00
|
|
|
goto out_unlock;
|
2007-12-19 01:03:30 +00:00
|
|
|
|
2011-05-12 12:31:49 +00:00
|
|
|
if (pairwise)
|
2013-03-24 12:23:27 +00:00
|
|
|
key = key_mtx_dereference(local, sta->ptk[key_idx]);
|
2011-05-12 12:31:49 +00:00
|
|
|
else
|
2011-05-13 12:15:49 +00:00
|
|
|
key = key_mtx_dereference(local, sta->gtk[key_idx]);
|
2011-05-12 12:31:49 +00:00
|
|
|
} else
|
2011-05-13 12:15:49 +00:00
|
|
|
key = key_mtx_dereference(local, sdata->keys[key_idx]);
|
2007-12-19 01:03:30 +00:00
|
|
|
|
2011-05-12 12:31:49 +00:00
|
|
|
if (!key) {
|
2008-04-08 15:56:52 +00:00
|
|
|
ret = -ENOENT;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
2007-12-19 01:03:30 +00:00
|
|
|
|
mac80211: restrict delayed tailroom needed decrement
As explained in ieee80211_delayed_tailroom_dec(), during roam,
keys of the old AP will be destroyed and new keys will be
installed. Deletion of the old key causes
crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key
installation causes a transition from 0 to 1.
Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1,
we invoke synchronize_net(); the reason for doing this is to avoid
a race in the TX path as explained in increment_tailroom_need_count().
This synchronize_net() operation can be slow and can affect the station
roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt
is delayed for a while so that upon installation of new key the
transition would be from 1 to 2 instead of 0 to 1 and thereby
improving the roam time.
This is all correct for a STA iftype, but deferring the tailroom_needed
decrement for other iftypes may be unnecessary.
For example, let's consider the case of a 4-addr client connecting to
an AP for which AP_VLAN interface is also created, let the initial
value for tailroom_needed on the AP be 1.
* 4-addr client connects to the AP (AP: tailroom_needed = 1)
* AP will clear old keys, delay decrement of tailroom_needed count
* AP_VLAN is created, it takes the tailroom count from master
(AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1)
* Install new key for the station, assume key is plumbed in the HW,
there won't be any change in tailroom_needed count on AP iface
* Delayed decrement of tailroom_needed count on AP
(AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1)
Because of the delayed decrement on AP iface, tailroom_needed count goes
out of sync between AP(master iface) and AP_VLAN(slave iface) and
there would be unnecessary tailroom created for the packets going
through AP_VLAN iface.
Also, WARN_ONs were observed while trying to bring down the AP_VLAN
interface:
(warn_slowpath_common) (warn_slowpath_null+0x18/0x20)
(warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4)
(ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850)
(ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c)
(ieee80211_stop) (__dev_close_many+0x94/0xb8)
(__dev_close_many) (dev_close_many+0x5c/0xc8)
Restricting delayed decrement to station interface alone fixes the problem
and it makes sense to do so because delayed decrement is done to improve
roam time which is applicable only for client devices.
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-07-10 11:18:27 +00:00
|
|
|
ieee80211_key_free(key, sdata->vif.type == NL80211_IFTYPE_STATION);
|
2007-12-19 01:03:30 +00:00
|
|
|
|
2008-04-08 15:56:52 +00:00
|
|
|
ret = 0;
|
|
|
|
out_unlock:
|
2011-05-12 12:31:49 +00:00
|
|
|
mutex_unlock(&local->key_mtx);
|
|
|
|
mutex_unlock(&local->sta_mtx);
|
2008-04-08 15:56:52 +00:00
|
|
|
|
|
|
|
return ret;
|
2007-12-19 01:03:30 +00:00
|
|
|
}
|
|
|
|
|
2007-12-19 01:03:31 +00:00
|
|
|
static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
|
2010-10-05 17:39:30 +00:00
|
|
|
u8 key_idx, bool pairwise, const u8 *mac_addr,
|
|
|
|
void *cookie,
|
2007-12-19 01:03:31 +00:00
|
|
|
void (*callback)(void *cookie,
|
|
|
|
struct key_params *params))
|
|
|
|
{
|
2008-07-29 11:22:52 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
2007-12-19 01:03:31 +00:00
|
|
|
struct sta_info *sta = NULL;
|
|
|
|
u8 seq[6] = {0};
|
|
|
|
struct key_params params;
|
2010-10-05 17:39:30 +00:00
|
|
|
struct ieee80211_key *key = NULL;
|
2011-07-06 19:59:39 +00:00
|
|
|
u64 pn64;
|
2007-12-19 01:03:31 +00:00
|
|
|
u32 iv32;
|
|
|
|
u16 iv16;
|
|
|
|
int err = -ENOENT;
|
2015-04-20 16:12:41 +00:00
|
|
|
struct ieee80211_key_seq kseq = {};
|
2007-12-19 01:03:31 +00:00
|
|
|
|
2008-07-29 11:22:52 +00:00
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
2008-04-08 15:56:52 +00:00
|
|
|
rcu_read_lock();
|
|
|
|
|
2007-12-19 01:03:31 +00:00
|
|
|
if (mac_addr) {
|
2010-01-08 17:10:58 +00:00
|
|
|
sta = sta_info_get_bss(sdata, mac_addr);
|
2007-12-19 01:03:31 +00:00
|
|
|
if (!sta)
|
|
|
|
goto out;
|
|
|
|
|
2013-12-08 11:30:52 +00:00
|
|
|
if (pairwise && key_idx < NUM_DEFAULT_KEYS)
|
2013-03-24 12:23:27 +00:00
|
|
|
key = rcu_dereference(sta->ptk[key_idx]);
|
2013-12-08 11:31:29 +00:00
|
|
|
else if (!pairwise &&
|
2020-02-22 13:25:44 +00:00
|
|
|
key_idx < NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS +
|
|
|
|
NUM_DEFAULT_BEACON_KEYS)
|
2011-05-12 13:11:37 +00:00
|
|
|
key = rcu_dereference(sta->gtk[key_idx]);
|
2007-12-19 01:03:31 +00:00
|
|
|
} else
|
2011-05-12 13:11:37 +00:00
|
|
|
key = rcu_dereference(sdata->keys[key_idx]);
|
2007-12-19 01:03:31 +00:00
|
|
|
|
|
|
|
if (!key)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
memset(¶ms, 0, sizeof(params));
|
|
|
|
|
2010-08-10 07:46:38 +00:00
|
|
|
params.cipher = key->conf.cipher;
|
2007-12-19 01:03:31 +00:00
|
|
|
|
2010-08-10 07:46:38 +00:00
|
|
|
switch (key->conf.cipher) {
|
|
|
|
case WLAN_CIPHER_SUITE_TKIP:
|
2016-02-14 11:56:35 +00:00
|
|
|
pn64 = atomic64_read(&key->conf.tx_pn);
|
|
|
|
iv32 = TKIP_PN_TO_IV32(pn64);
|
|
|
|
iv16 = TKIP_PN_TO_IV16(pn64);
|
2007-12-19 01:03:31 +00:00
|
|
|
|
2015-04-20 16:12:41 +00:00
|
|
|
if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE &&
|
|
|
|
!(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) {
|
|
|
|
drv_get_key_seq(sdata->local, key, &kseq);
|
|
|
|
iv32 = kseq.tkip.iv32;
|
|
|
|
iv16 = kseq.tkip.iv16;
|
|
|
|
}
|
2007-12-19 01:03:31 +00:00
|
|
|
|
|
|
|
seq[0] = iv16 & 0xff;
|
|
|
|
seq[1] = (iv16 >> 8) & 0xff;
|
|
|
|
seq[2] = iv32 & 0xff;
|
|
|
|
seq[3] = (iv32 >> 8) & 0xff;
|
|
|
|
seq[4] = (iv32 >> 16) & 0xff;
|
|
|
|
seq[5] = (iv32 >> 24) & 0xff;
|
|
|
|
params.seq = seq;
|
|
|
|
params.seq_len = 6;
|
|
|
|
break;
|
2010-08-10 07:46:38 +00:00
|
|
|
case WLAN_CIPHER_SUITE_CCMP:
|
2015-01-24 17:52:07 +00:00
|
|
|
case WLAN_CIPHER_SUITE_CCMP_256:
|
2010-08-10 07:46:38 +00:00
|
|
|
case WLAN_CIPHER_SUITE_AES_CMAC:
|
2015-01-24 17:52:08 +00:00
|
|
|
case WLAN_CIPHER_SUITE_BIP_CMAC_256:
|
2015-06-01 13:36:51 +00:00
|
|
|
BUILD_BUG_ON(offsetof(typeof(kseq), ccmp) !=
|
|
|
|
offsetof(typeof(kseq), aes_cmac));
|
2017-10-17 23:14:50 +00:00
|
|
|
/* fall through */
|
2015-01-24 17:52:09 +00:00
|
|
|
case WLAN_CIPHER_SUITE_BIP_GMAC_128:
|
|
|
|
case WLAN_CIPHER_SUITE_BIP_GMAC_256:
|
2015-06-01 13:36:51 +00:00
|
|
|
BUILD_BUG_ON(offsetof(typeof(kseq), ccmp) !=
|
|
|
|
offsetof(typeof(kseq), aes_gmac));
|
2017-10-17 23:14:50 +00:00
|
|
|
/* fall through */
|
2015-01-24 17:52:06 +00:00
|
|
|
case WLAN_CIPHER_SUITE_GCMP:
|
|
|
|
case WLAN_CIPHER_SUITE_GCMP_256:
|
2015-06-01 13:36:51 +00:00
|
|
|
BUILD_BUG_ON(offsetof(typeof(kseq), ccmp) !=
|
|
|
|
offsetof(typeof(kseq), gcmp));
|
|
|
|
|
2015-04-20 16:12:41 +00:00
|
|
|
if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE &&
|
|
|
|
!(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) {
|
|
|
|
drv_get_key_seq(sdata->local, key, &kseq);
|
2015-06-01 13:36:51 +00:00
|
|
|
memcpy(seq, kseq.ccmp.pn, 6);
|
2015-04-20 16:12:41 +00:00
|
|
|
} else {
|
2015-06-01 13:36:51 +00:00
|
|
|
pn64 = atomic64_read(&key->conf.tx_pn);
|
2015-04-20 16:12:41 +00:00
|
|
|
seq[0] = pn64;
|
|
|
|
seq[1] = pn64 >> 8;
|
|
|
|
seq[2] = pn64 >> 16;
|
|
|
|
seq[3] = pn64 >> 24;
|
|
|
|
seq[4] = pn64 >> 32;
|
|
|
|
seq[5] = pn64 >> 40;
|
|
|
|
}
|
2015-01-24 17:52:06 +00:00
|
|
|
params.seq = seq;
|
|
|
|
params.seq_len = 6;
|
|
|
|
break;
|
2015-04-20 16:21:58 +00:00
|
|
|
default:
|
|
|
|
if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
|
|
|
|
break;
|
|
|
|
if (WARN_ON(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV))
|
|
|
|
break;
|
|
|
|
drv_get_key_seq(sdata->local, key, &kseq);
|
|
|
|
params.seq = kseq.hw.seq;
|
|
|
|
params.seq_len = kseq.hw.seq_len;
|
|
|
|
break;
|
2007-12-19 01:03:31 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
params.key = key->conf.key;
|
|
|
|
params.key_len = key->conf.keylen;
|
|
|
|
|
|
|
|
callback(cookie, ¶ms);
|
|
|
|
err = 0;
|
|
|
|
|
|
|
|
out:
|
2008-04-08 15:56:52 +00:00
|
|
|
rcu_read_unlock();
|
2007-12-19 01:03:31 +00:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2007-12-19 01:03:30 +00:00
|
|
|
static int ieee80211_config_default_key(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
2010-12-09 18:58:59 +00:00
|
|
|
u8 key_idx, bool uni,
|
|
|
|
bool multi)
|
2007-12-19 01:03:30 +00:00
|
|
|
{
|
2010-06-01 08:19:19 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2008-04-08 15:56:52 +00:00
|
|
|
|
2010-12-09 18:49:02 +00:00
|
|
|
ieee80211_set_default_key(sdata, key_idx, uni, multi);
|
2007-12-19 01:03:30 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-01-08 11:32:02 +00:00
|
|
|
static int ieee80211_config_default_mgmt_key(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
u8 key_idx)
|
|
|
|
{
|
2010-07-22 11:58:51 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2009-01-08 11:32:02 +00:00
|
|
|
|
|
|
|
ieee80211_set_default_mgmt_key(sdata, key_idx);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-02-22 13:25:44 +00:00
|
|
|
static int ieee80211_config_default_beacon_key(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
u8 key_idx)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
ieee80211_set_default_beacon_key(sdata, key_idx);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-03-05 23:31:48 +00:00
|
|
|
void sta_set_rate_info_tx(struct sta_info *sta,
|
|
|
|
const struct ieee80211_tx_rate *rate,
|
|
|
|
struct rate_info *rinfo)
|
|
|
|
{
|
|
|
|
rinfo->flags = 0;
|
2012-11-09 17:38:32 +00:00
|
|
|
if (rate->flags & IEEE80211_TX_RC_MCS) {
|
2012-03-05 23:31:48 +00:00
|
|
|
rinfo->flags |= RATE_INFO_FLAGS_MCS;
|
2012-11-09 17:38:32 +00:00
|
|
|
rinfo->mcs = rate->idx;
|
|
|
|
} else if (rate->flags & IEEE80211_TX_RC_VHT_MCS) {
|
|
|
|
rinfo->flags |= RATE_INFO_FLAGS_VHT_MCS;
|
|
|
|
rinfo->mcs = ieee80211_rate_get_vht_mcs(rate);
|
|
|
|
rinfo->nss = ieee80211_rate_get_vht_nss(rate);
|
|
|
|
} else {
|
|
|
|
struct ieee80211_supported_band *sband;
|
2013-07-08 14:55:53 +00:00
|
|
|
int shift = ieee80211_vif_get_shift(&sta->sdata->vif);
|
|
|
|
u16 brate;
|
|
|
|
|
2017-04-27 07:15:38 +00:00
|
|
|
sband = ieee80211_get_sband(sta->sdata);
|
|
|
|
if (sband) {
|
|
|
|
brate = sband->bitrates[rate->idx].bitrate;
|
|
|
|
rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift);
|
|
|
|
}
|
2012-11-09 17:38:32 +00:00
|
|
|
}
|
2012-03-05 23:31:48 +00:00
|
|
|
if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
|
2015-01-15 15:14:02 +00:00
|
|
|
rinfo->bw = RATE_INFO_BW_40;
|
|
|
|
else if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
|
|
|
|
rinfo->bw = RATE_INFO_BW_80;
|
|
|
|
else if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
|
|
|
|
rinfo->bw = RATE_INFO_BW_160;
|
|
|
|
else
|
|
|
|
rinfo->bw = RATE_INFO_BW_20;
|
2012-03-05 23:31:48 +00:00
|
|
|
if (rate->flags & IEEE80211_TX_RC_SHORT_GI)
|
|
|
|
rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
|
|
|
|
}
|
|
|
|
|
2008-02-23 14:17:17 +00:00
|
|
|
static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
|
2014-05-19 15:19:31 +00:00
|
|
|
int idx, u8 *mac, struct station_info *sinfo)
|
2008-02-23 14:17:17 +00:00
|
|
|
{
|
2009-11-16 11:00:37 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2012-06-21 07:56:46 +00:00
|
|
|
struct ieee80211_local *local = sdata->local;
|
2008-02-23 14:17:17 +00:00
|
|
|
struct sta_info *sta;
|
2008-02-25 15:27:46 +00:00
|
|
|
int ret = -ENOENT;
|
|
|
|
|
2012-06-21 07:56:46 +00:00
|
|
|
mutex_lock(&local->sta_mtx);
|
2008-02-23 14:17:17 +00:00
|
|
|
|
2009-11-16 11:00:37 +00:00
|
|
|
sta = sta_info_get_by_idx(sdata, idx);
|
2008-02-25 15:27:46 +00:00
|
|
|
if (sta) {
|
|
|
|
ret = 0;
|
2008-09-10 22:02:02 +00:00
|
|
|
memcpy(mac, sta->sta.addr, ETH_ALEN);
|
2018-05-18 09:40:44 +00:00
|
|
|
sta_set_sinfo(sta, sinfo, true);
|
2008-02-25 15:27:46 +00:00
|
|
|
}
|
2008-02-23 14:17:17 +00:00
|
|
|
|
2012-06-21 07:56:46 +00:00
|
|
|
mutex_unlock(&local->sta_mtx);
|
2008-02-23 14:17:17 +00:00
|
|
|
|
2008-02-25 15:27:46 +00:00
|
|
|
return ret;
|
2008-02-23 14:17:17 +00:00
|
|
|
}
|
|
|
|
|
2010-04-19 08:23:57 +00:00
|
|
|
static int ieee80211_dump_survey(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
int idx, struct survey_info *survey)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
|
|
|
|
|
|
|
|
return drv_get_survey(local, idx, survey);
|
|
|
|
}
|
|
|
|
|
2007-12-19 01:03:37 +00:00
|
|
|
static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev,
|
2014-05-19 15:19:31 +00:00
|
|
|
const u8 *mac, struct station_info *sinfo)
|
2007-12-19 01:03:37 +00:00
|
|
|
{
|
2009-11-25 16:46:18 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2012-06-21 07:56:46 +00:00
|
|
|
struct ieee80211_local *local = sdata->local;
|
2007-12-19 01:03:37 +00:00
|
|
|
struct sta_info *sta;
|
2008-02-25 15:27:46 +00:00
|
|
|
int ret = -ENOENT;
|
2007-12-19 01:03:37 +00:00
|
|
|
|
2012-06-21 07:56:46 +00:00
|
|
|
mutex_lock(&local->sta_mtx);
|
2007-12-19 01:03:37 +00:00
|
|
|
|
2010-01-08 17:10:58 +00:00
|
|
|
sta = sta_info_get_bss(sdata, mac);
|
2008-02-25 15:27:46 +00:00
|
|
|
if (sta) {
|
|
|
|
ret = 0;
|
2018-05-18 09:40:44 +00:00
|
|
|
sta_set_sinfo(sta, sinfo, true);
|
2008-02-25 15:27:46 +00:00
|
|
|
}
|
|
|
|
|
2012-06-21 07:56:46 +00:00
|
|
|
mutex_unlock(&local->sta_mtx);
|
2008-02-25 15:27:46 +00:00
|
|
|
|
|
|
|
return ret;
|
2007-12-19 01:03:37 +00:00
|
|
|
}
|
|
|
|
|
2012-07-26 15:24:39 +00:00
|
|
|
static int ieee80211_set_monitor_channel(struct wiphy *wiphy,
|
2012-11-08 20:25:48 +00:00
|
|
|
struct cfg80211_chan_def *chandef)
|
2012-05-16 21:50:16 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2012-07-26 15:24:39 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
int ret = 0;
|
2012-05-16 21:50:16 +00:00
|
|
|
|
2012-11-09 10:39:59 +00:00
|
|
|
if (cfg80211_chandef_identical(&local->monitor_chandef, chandef))
|
2012-07-26 15:24:39 +00:00
|
|
|
return 0;
|
2012-05-16 21:50:16 +00:00
|
|
|
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_lock(&local->mtx);
|
2012-07-26 15:24:39 +00:00
|
|
|
if (local->use_chanctx) {
|
2017-04-26 07:58:53 +00:00
|
|
|
sdata = rtnl_dereference(local->monitor_sdata);
|
2012-07-26 15:24:39 +00:00
|
|
|
if (sdata) {
|
|
|
|
ieee80211_vif_release_channel(sdata);
|
2012-11-09 10:39:59 +00:00
|
|
|
ret = ieee80211_vif_use_channel(sdata, chandef,
|
2012-07-26 15:24:39 +00:00
|
|
|
IEEE80211_CHANCTX_EXCLUSIVE);
|
|
|
|
}
|
|
|
|
} else if (local->open_count == local->monitors) {
|
2013-03-25 15:26:57 +00:00
|
|
|
local->_oper_chandef = *chandef;
|
2012-07-26 15:24:39 +00:00
|
|
|
ieee80211_hw_config(local, 0);
|
|
|
|
}
|
2012-05-16 21:50:16 +00:00
|
|
|
|
2012-11-09 10:39:59 +00:00
|
|
|
if (ret == 0)
|
|
|
|
local->monitor_chandef = *chandef;
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_unlock(&local->mtx);
|
2012-05-16 21:50:16 +00:00
|
|
|
|
2012-07-26 15:24:39 +00:00
|
|
|
return ret;
|
2012-06-06 06:18:22 +00:00
|
|
|
}
|
|
|
|
|
2011-11-10 09:28:57 +00:00
|
|
|
static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata,
|
2014-06-05 12:21:36 +00:00
|
|
|
const u8 *resp, size_t resp_len,
|
|
|
|
const struct ieee80211_csa_settings *csa)
|
2011-11-10 09:28:57 +00:00
|
|
|
{
|
2012-08-06 11:26:16 +00:00
|
|
|
struct probe_resp *new, *old;
|
2011-11-10 09:28:57 +00:00
|
|
|
|
|
|
|
if (!resp || !resp_len)
|
2012-08-22 08:51:07 +00:00
|
|
|
return 1;
|
2011-11-10 09:28:57 +00:00
|
|
|
|
2013-11-21 17:19:50 +00:00
|
|
|
old = sdata_dereference(sdata->u.ap.probe_resp, sdata);
|
2011-11-10 09:28:57 +00:00
|
|
|
|
2012-08-06 11:26:16 +00:00
|
|
|
new = kzalloc(sizeof(struct probe_resp) + resp_len, GFP_KERNEL);
|
2011-11-10 09:28:57 +00:00
|
|
|
if (!new)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2012-08-06 11:26:16 +00:00
|
|
|
new->len = resp_len;
|
|
|
|
memcpy(new->data, resp, resp_len);
|
2011-11-10 09:28:57 +00:00
|
|
|
|
2014-06-05 12:21:36 +00:00
|
|
|
if (csa)
|
|
|
|
memcpy(new->csa_counter_offsets, csa->counter_offsets_presp,
|
|
|
|
csa->n_counter_offsets_presp *
|
|
|
|
sizeof(new->csa_counter_offsets[0]));
|
|
|
|
|
2011-11-10 09:28:57 +00:00
|
|
|
rcu_assign_pointer(sdata->u.ap.probe_resp, new);
|
2012-08-06 11:26:16 +00:00
|
|
|
if (old)
|
|
|
|
kfree_rcu(old, rcu_head);
|
2011-11-10 09:28:57 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-10-04 03:19:20 +00:00
|
|
|
static int ieee80211_set_ftm_responder_params(
|
|
|
|
struct ieee80211_sub_if_data *sdata,
|
|
|
|
const u8 *lci, size_t lci_len,
|
|
|
|
const u8 *civicloc, size_t civicloc_len)
|
|
|
|
{
|
|
|
|
struct ieee80211_ftm_responder_params *new, *old;
|
|
|
|
struct ieee80211_bss_conf *bss_conf;
|
|
|
|
u8 *pos;
|
|
|
|
int len;
|
|
|
|
|
2018-12-15 09:03:24 +00:00
|
|
|
if (!lci_len && !civicloc_len)
|
|
|
|
return 0;
|
2018-10-04 03:19:20 +00:00
|
|
|
|
|
|
|
bss_conf = &sdata->vif.bss_conf;
|
|
|
|
old = bss_conf->ftmr_params;
|
|
|
|
len = lci_len + civicloc_len;
|
|
|
|
|
|
|
|
new = kzalloc(sizeof(*new) + len, GFP_KERNEL);
|
|
|
|
if (!new)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
pos = (u8 *)(new + 1);
|
|
|
|
if (lci_len) {
|
|
|
|
new->lci_len = lci_len;
|
|
|
|
new->lci = pos;
|
|
|
|
memcpy(pos, lci, lci_len);
|
|
|
|
pos += lci_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (civicloc_len) {
|
|
|
|
new->civicloc_len = civicloc_len;
|
|
|
|
new->civicloc = pos;
|
|
|
|
memcpy(pos, civicloc, civicloc_len);
|
|
|
|
pos += civicloc_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
bss_conf->ftmr_params = new;
|
|
|
|
kfree(old);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-12-08 07:42:25 +00:00
|
|
|
static int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata,
|
2014-06-05 12:21:36 +00:00
|
|
|
struct cfg80211_beacon_data *params,
|
|
|
|
const struct ieee80211_csa_settings *csa)
|
2007-12-19 01:03:33 +00:00
|
|
|
{
|
|
|
|
struct beacon_data *new, *old;
|
|
|
|
int new_head_len, new_tail_len;
|
2012-02-13 14:17:18 +00:00
|
|
|
int size, err;
|
|
|
|
u32 changed = BSS_CHANGED_BEACON;
|
2007-12-19 01:03:33 +00:00
|
|
|
|
2013-11-21 17:19:50 +00:00
|
|
|
old = sdata_dereference(sdata->u.ap.beacon, sdata);
|
|
|
|
|
2007-12-19 01:03:33 +00:00
|
|
|
|
|
|
|
/* Need to have a beacon head if we don't have one yet */
|
|
|
|
if (!params->head && !old)
|
2012-02-13 14:17:18 +00:00
|
|
|
return -EINVAL;
|
2007-12-19 01:03:33 +00:00
|
|
|
|
|
|
|
/* new or old head? */
|
|
|
|
if (params->head)
|
|
|
|
new_head_len = params->head_len;
|
|
|
|
else
|
|
|
|
new_head_len = old->head_len;
|
|
|
|
|
|
|
|
/* new or old tail? */
|
|
|
|
if (params->tail || !old)
|
|
|
|
/* params->tail_len will be zero for !params->tail */
|
|
|
|
new_tail_len = params->tail_len;
|
|
|
|
else
|
|
|
|
new_tail_len = old->tail_len;
|
|
|
|
|
|
|
|
size = sizeof(*new) + new_head_len + new_tail_len;
|
|
|
|
|
|
|
|
new = kzalloc(size, GFP_KERNEL);
|
|
|
|
if (!new)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
/* start filling the new info now */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* pointers go into the block we allocated,
|
|
|
|
* memory is | beacon_data | head | tail |
|
|
|
|
*/
|
|
|
|
new->head = ((u8 *) new) + sizeof(*new);
|
|
|
|
new->tail = new->head + new_head_len;
|
|
|
|
new->head_len = new_head_len;
|
|
|
|
new->tail_len = new_tail_len;
|
|
|
|
|
2014-06-05 12:21:36 +00:00
|
|
|
if (csa) {
|
|
|
|
new->csa_current_counter = csa->count;
|
|
|
|
memcpy(new->csa_counter_offsets, csa->counter_offsets_beacon,
|
|
|
|
csa->n_counter_offsets_beacon *
|
|
|
|
sizeof(new->csa_counter_offsets[0]));
|
|
|
|
}
|
|
|
|
|
2007-12-19 01:03:33 +00:00
|
|
|
/* copy in head */
|
|
|
|
if (params->head)
|
|
|
|
memcpy(new->head, params->head, new_head_len);
|
|
|
|
else
|
|
|
|
memcpy(new->head, old->head, new_head_len);
|
|
|
|
|
|
|
|
/* copy in optional tail */
|
|
|
|
if (params->tail)
|
|
|
|
memcpy(new->tail, params->tail, new_tail_len);
|
|
|
|
else
|
|
|
|
if (old)
|
|
|
|
memcpy(new->tail, old->tail, new_tail_len);
|
|
|
|
|
2011-11-10 09:28:57 +00:00
|
|
|
err = ieee80211_set_probe_resp(sdata, params->probe_resp,
|
2014-06-05 12:21:36 +00:00
|
|
|
params->probe_resp_len, csa);
|
2019-07-02 22:29:47 +00:00
|
|
|
if (err < 0) {
|
|
|
|
kfree(new);
|
2012-02-13 14:17:18 +00:00
|
|
|
return err;
|
2019-07-02 22:29:47 +00:00
|
|
|
}
|
2012-02-13 14:17:18 +00:00
|
|
|
if (err == 0)
|
2011-11-10 09:28:57 +00:00
|
|
|
changed |= BSS_CHANGED_AP_PROBE_RESP;
|
|
|
|
|
2018-10-04 03:19:20 +00:00
|
|
|
if (params->ftm_responder != -1) {
|
|
|
|
sdata->vif.bss_conf.ftm_responder = params->ftm_responder;
|
|
|
|
err = ieee80211_set_ftm_responder_params(sdata,
|
|
|
|
params->lci,
|
|
|
|
params->lci_len,
|
|
|
|
params->civicloc,
|
|
|
|
params->civicloc_len);
|
|
|
|
|
2019-07-02 22:29:47 +00:00
|
|
|
if (err < 0) {
|
|
|
|
kfree(new);
|
2018-10-04 03:19:20 +00:00
|
|
|
return err;
|
2019-07-02 22:29:47 +00:00
|
|
|
}
|
2018-10-04 03:19:20 +00:00
|
|
|
|
|
|
|
changed |= BSS_CHANGED_FTM_RESPONDER;
|
|
|
|
}
|
|
|
|
|
2012-02-13 14:17:18 +00:00
|
|
|
rcu_assign_pointer(sdata->u.ap.beacon, new);
|
|
|
|
|
|
|
|
if (old)
|
|
|
|
kfree_rcu(old, rcu_head);
|
2011-09-04 08:11:32 +00:00
|
|
|
|
2012-02-13 14:17:18 +00:00
|
|
|
return changed;
|
2007-12-19 01:03:33 +00:00
|
|
|
}
|
|
|
|
|
2012-02-13 14:17:18 +00:00
|
|
|
static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
struct cfg80211_ap_settings *params)
|
2007-12-19 01:03:33 +00:00
|
|
|
{
|
2012-02-13 14:17:18 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
struct ieee80211_local *local = sdata->local;
|
2007-12-19 01:03:33 +00:00
|
|
|
struct beacon_data *old;
|
2011-11-04 10:18:11 +00:00
|
|
|
struct ieee80211_sub_if_data *vlan;
|
2012-02-13 14:17:18 +00:00
|
|
|
u32 changed = BSS_CHANGED_BEACON_INT |
|
|
|
|
BSS_CHANGED_BEACON_ENABLED |
|
|
|
|
BSS_CHANGED_BEACON |
|
2012-11-14 14:21:17 +00:00
|
|
|
BSS_CHANGED_SSID |
|
2014-11-13 10:23:53 +00:00
|
|
|
BSS_CHANGED_P2P_PS |
|
2019-05-28 11:49:48 +00:00
|
|
|
BSS_CHANGED_TXPOWER |
|
2019-07-30 16:37:01 +00:00
|
|
|
BSS_CHANGED_TWT |
|
2019-12-17 14:19:19 +00:00
|
|
|
BSS_CHANGED_HE_OBSS_PD |
|
|
|
|
BSS_CHANGED_HE_BSS_COLOR;
|
2020-04-25 15:57:12 +00:00
|
|
|
int i, err;
|
mac80211: Restore vif beacon interval if start ap fails
The starting of AP interface can fail due to invalid
beacon interval, which does not match the minimum gcd
requirement set by the wifi driver. In such case, the
beacon interval of that interface gets updated with
that invalid beacon interval.
The next time that interface is brought up in AP mode,
an interface combination check is performed and the
beacon interval is taken from the previously set value.
In a case where an invalid beacon interval, i.e. a beacon
interval value which does not satisfy the minimum gcd criteria
set by the driver, is set, all the subsequent trials to
bring that interface in AP mode will fail, even if the
subsequent trials have a valid beacon interval.
To avoid this, in case of a failure in bringing up an
interface in AP mode due to interface combination error,
the interface beacon interval which is stored in bss
conf, needs to be restored with the last working value
of beacon interval.
Tested on ath10k using WCN3990.
Cc: stable@vger.kernel.org
Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-15 08:46:02 +00:00
|
|
|
int prev_beacon_int;
|
2008-07-29 11:22:52 +00:00
|
|
|
|
2013-11-21 17:19:50 +00:00
|
|
|
old = sdata_dereference(sdata->u.ap.beacon, sdata);
|
2007-12-19 01:03:33 +00:00
|
|
|
if (old)
|
|
|
|
return -EALREADY;
|
|
|
|
|
2020-01-31 11:12:56 +00:00
|
|
|
if (params->smps_mode != NL80211_SMPS_OFF)
|
|
|
|
return -ENOTSUPP;
|
|
|
|
|
|
|
|
sdata->smps_mode = IEEE80211_SMPS_OFF;
|
2017-06-10 10:52:45 +00:00
|
|
|
|
2012-09-11 12:34:12 +00:00
|
|
|
sdata->needed_rx_chains = sdata->local->rx_chains;
|
|
|
|
|
mac80211: Restore vif beacon interval if start ap fails
The starting of AP interface can fail due to invalid
beacon interval, which does not match the minimum gcd
requirement set by the wifi driver. In such case, the
beacon interval of that interface gets updated with
that invalid beacon interval.
The next time that interface is brought up in AP mode,
an interface combination check is performed and the
beacon interval is taken from the previously set value.
In a case where an invalid beacon interval, i.e. a beacon
interval value which does not satisfy the minimum gcd criteria
set by the driver, is set, all the subsequent trials to
bring that interface in AP mode will fail, even if the
subsequent trials have a valid beacon interval.
To avoid this, in case of a failure in bringing up an
interface in AP mode due to interface combination error,
the interface beacon interval which is stored in bss
conf, needs to be restored with the last working value
of beacon interval.
Tested on ath10k using WCN3990.
Cc: stable@vger.kernel.org
Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-15 08:46:02 +00:00
|
|
|
prev_beacon_int = sdata->vif.bss_conf.beacon_int;
|
2016-10-21 12:25:14 +00:00
|
|
|
sdata->vif.bss_conf.beacon_int = params->beacon_interval;
|
|
|
|
|
2020-01-31 11:12:55 +00:00
|
|
|
if (params->he_cap && params->he_oper) {
|
2018-08-31 08:31:15 +00:00
|
|
|
sdata->vif.bss_conf.he_support = true;
|
2020-01-31 11:12:55 +00:00
|
|
|
sdata->vif.bss_conf.htc_trig_based_pkt_ext =
|
|
|
|
le32_get_bits(params->he_oper->he_oper_params,
|
|
|
|
IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK);
|
|
|
|
sdata->vif.bss_conf.frame_time_rts_th =
|
|
|
|
le32_get_bits(params->he_oper->he_oper_params,
|
|
|
|
IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
|
|
|
|
}
|
2018-08-31 08:31:15 +00:00
|
|
|
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_lock(&local->mtx);
|
2012-11-09 10:39:59 +00:00
|
|
|
err = ieee80211_vif_use_channel(sdata, ¶ms->chandef,
|
2012-07-26 15:24:39 +00:00
|
|
|
IEEE80211_CHANCTX_SHARED);
|
2014-03-05 12:14:08 +00:00
|
|
|
if (!err)
|
|
|
|
ieee80211_vif_copy_chanctx_to_vlans(sdata, false);
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_unlock(&local->mtx);
|
mac80211: Restore vif beacon interval if start ap fails
The starting of AP interface can fail due to invalid
beacon interval, which does not match the minimum gcd
requirement set by the wifi driver. In such case, the
beacon interval of that interface gets updated with
that invalid beacon interval.
The next time that interface is brought up in AP mode,
an interface combination check is performed and the
beacon interval is taken from the previously set value.
In a case where an invalid beacon interval, i.e. a beacon
interval value which does not satisfy the minimum gcd criteria
set by the driver, is set, all the subsequent trials to
bring that interface in AP mode will fail, even if the
subsequent trials have a valid beacon interval.
To avoid this, in case of a failure in bringing up an
interface in AP mode due to interface combination error,
the interface beacon interval which is stored in bss
conf, needs to be restored with the last working value
of beacon interval.
Tested on ath10k using WCN3990.
Cc: stable@vger.kernel.org
Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-15 08:46:02 +00:00
|
|
|
if (err) {
|
|
|
|
sdata->vif.bss_conf.beacon_int = prev_beacon_int;
|
2012-05-16 21:50:18 +00:00
|
|
|
return err;
|
mac80211: Restore vif beacon interval if start ap fails
The starting of AP interface can fail due to invalid
beacon interval, which does not match the minimum gcd
requirement set by the wifi driver. In such case, the
beacon interval of that interface gets updated with
that invalid beacon interval.
The next time that interface is brought up in AP mode,
an interface combination check is performed and the
beacon interval is taken from the previously set value.
In a case where an invalid beacon interval, i.e. a beacon
interval value which does not satisfy the minimum gcd criteria
set by the driver, is set, all the subsequent trials to
bring that interface in AP mode will fail, even if the
subsequent trials have a valid beacon interval.
To avoid this, in case of a failure in bringing up an
interface in AP mode due to interface combination error,
the interface beacon interval which is stored in bss
conf, needs to be restored with the last working value
of beacon interval.
Tested on ath10k using WCN3990.
Cc: stable@vger.kernel.org
Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-15 08:46:02 +00:00
|
|
|
}
|
2012-05-16 21:50:18 +00:00
|
|
|
|
2011-11-04 10:18:11 +00:00
|
|
|
/*
|
|
|
|
* Apply control port protocol, this allows us to
|
|
|
|
* not encrypt dynamic WEP control frames.
|
|
|
|
*/
|
|
|
|
sdata->control_port_protocol = params->crypto.control_port_ethertype;
|
|
|
|
sdata->control_port_no_encrypt = params->crypto.control_port_no_encrypt;
|
2018-03-26 17:52:51 +00:00
|
|
|
sdata->control_port_over_nl80211 =
|
|
|
|
params->crypto.control_port_over_nl80211;
|
2020-03-12 09:10:54 +00:00
|
|
|
sdata->control_port_no_preauth =
|
|
|
|
params->crypto.control_port_no_preauth;
|
2013-03-24 12:23:27 +00:00
|
|
|
sdata->encrypt_headroom = ieee80211_cs_headroom(sdata->local,
|
|
|
|
¶ms->crypto,
|
|
|
|
sdata->vif.type);
|
|
|
|
|
2011-11-04 10:18:11 +00:00
|
|
|
list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) {
|
|
|
|
vlan->control_port_protocol =
|
|
|
|
params->crypto.control_port_ethertype;
|
|
|
|
vlan->control_port_no_encrypt =
|
|
|
|
params->crypto.control_port_no_encrypt;
|
2018-03-26 17:52:51 +00:00
|
|
|
vlan->control_port_over_nl80211 =
|
|
|
|
params->crypto.control_port_over_nl80211;
|
2020-03-12 09:10:54 +00:00
|
|
|
vlan->control_port_no_preauth =
|
|
|
|
params->crypto.control_port_no_preauth;
|
2013-03-24 12:23:27 +00:00
|
|
|
vlan->encrypt_headroom =
|
|
|
|
ieee80211_cs_headroom(sdata->local,
|
|
|
|
¶ms->crypto,
|
|
|
|
vlan->vif.type);
|
2011-11-04 10:18:11 +00:00
|
|
|
}
|
|
|
|
|
2012-02-13 14:17:18 +00:00
|
|
|
sdata->vif.bss_conf.dtim_period = params->dtim_period;
|
2012-12-14 13:06:28 +00:00
|
|
|
sdata->vif.bss_conf.enable_beacon = true;
|
2016-03-17 13:41:39 +00:00
|
|
|
sdata->vif.bss_conf.allow_p2p_go_ps = sdata->vif.p2p;
|
2019-05-28 11:49:48 +00:00
|
|
|
sdata->vif.bss_conf.twt_responder = params->twt_responder;
|
2019-07-30 16:37:01 +00:00
|
|
|
memcpy(&sdata->vif.bss_conf.he_obss_pd, ¶ms->he_obss_pd,
|
|
|
|
sizeof(struct ieee80211_he_obss_pd));
|
2019-12-17 14:19:19 +00:00
|
|
|
memcpy(&sdata->vif.bss_conf.he_bss_color, ¶ms->he_bss_color,
|
|
|
|
sizeof(struct ieee80211_he_bss_color));
|
2012-02-13 14:17:18 +00:00
|
|
|
|
|
|
|
sdata->vif.bss_conf.ssid_len = params->ssid_len;
|
|
|
|
if (params->ssid_len)
|
|
|
|
memcpy(sdata->vif.bss_conf.ssid, params->ssid,
|
|
|
|
params->ssid_len);
|
|
|
|
sdata->vif.bss_conf.hidden_ssid =
|
|
|
|
(params->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE);
|
|
|
|
|
2013-03-21 14:47:56 +00:00
|
|
|
memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
|
|
|
|
sizeof(sdata->vif.bss_conf.p2p_noa_attr));
|
|
|
|
sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow =
|
|
|
|
params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK;
|
|
|
|
if (params->p2p_opp_ps)
|
|
|
|
sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |=
|
|
|
|
IEEE80211_P2P_OPPPS_ENABLE_BIT;
|
2012-11-14 14:21:17 +00:00
|
|
|
|
2020-04-25 15:57:12 +00:00
|
|
|
sdata->beacon_rate_set = false;
|
|
|
|
if (wiphy_ext_feature_isset(local->hw.wiphy,
|
|
|
|
NL80211_EXT_FEATURE_BEACON_RATE_LEGACY)) {
|
|
|
|
for (i = 0; i < NUM_NL80211_BANDS; i++) {
|
|
|
|
sdata->beacon_rateidx_mask[i] =
|
|
|
|
params->beacon_rate.control[i].legacy;
|
|
|
|
if (sdata->beacon_rateidx_mask[i])
|
|
|
|
sdata->beacon_rate_set = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-06-05 12:21:36 +00:00
|
|
|
err = ieee80211_assign_beacon(sdata, ¶ms->beacon, NULL);
|
2014-01-27 09:07:42 +00:00
|
|
|
if (err < 0) {
|
|
|
|
ieee80211_vif_release_channel(sdata);
|
2012-02-13 14:17:18 +00:00
|
|
|
return err;
|
2014-01-27 09:07:42 +00:00
|
|
|
}
|
2012-02-13 14:17:18 +00:00
|
|
|
changed |= err;
|
|
|
|
|
2012-10-19 13:44:42 +00:00
|
|
|
err = drv_start_ap(sdata->local, sdata);
|
|
|
|
if (err) {
|
2013-11-21 17:19:50 +00:00
|
|
|
old = sdata_dereference(sdata->u.ap.beacon, sdata);
|
|
|
|
|
2012-10-19 13:44:42 +00:00
|
|
|
if (old)
|
|
|
|
kfree_rcu(old, rcu_head);
|
|
|
|
RCU_INIT_POINTER(sdata->u.ap.beacon, NULL);
|
2014-01-27 09:07:42 +00:00
|
|
|
ieee80211_vif_release_channel(sdata);
|
2012-10-19 13:44:42 +00:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2013-12-19 18:25:15 +00:00
|
|
|
ieee80211_recalc_dtim(local, sdata);
|
2012-02-13 14:17:18 +00:00
|
|
|
ieee80211_bss_info_change_notify(sdata, changed);
|
|
|
|
|
2012-04-03 08:24:00 +00:00
|
|
|
netif_carrier_on(dev);
|
|
|
|
list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
|
|
|
|
netif_carrier_on(vlan->dev);
|
|
|
|
|
2011-11-04 10:18:11 +00:00
|
|
|
return 0;
|
2007-12-19 01:03:33 +00:00
|
|
|
}
|
|
|
|
|
2012-02-13 14:17:18 +00:00
|
|
|
static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
struct cfg80211_beacon_data *params)
|
2007-12-19 01:03:33 +00:00
|
|
|
{
|
2008-07-29 11:22:52 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
2007-12-19 01:03:33 +00:00
|
|
|
struct beacon_data *old;
|
2012-02-13 14:17:18 +00:00
|
|
|
int err;
|
2007-12-19 01:03:33 +00:00
|
|
|
|
2008-07-29 11:22:52 +00:00
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2014-01-29 06:56:21 +00:00
|
|
|
sdata_assert_lock(sdata);
|
2008-07-29 11:22:52 +00:00
|
|
|
|
2013-07-11 14:09:06 +00:00
|
|
|
/* don't allow changing the beacon while CSA is in place - offset
|
|
|
|
* of channel switch counter may change
|
|
|
|
*/
|
|
|
|
if (sdata->vif.csa_active)
|
|
|
|
return -EBUSY;
|
|
|
|
|
2013-11-21 17:19:50 +00:00
|
|
|
old = sdata_dereference(sdata->u.ap.beacon, sdata);
|
2007-12-19 01:03:33 +00:00
|
|
|
if (!old)
|
|
|
|
return -ENOENT;
|
|
|
|
|
2014-06-05 12:21:36 +00:00
|
|
|
err = ieee80211_assign_beacon(sdata, params, NULL);
|
2012-02-13 14:17:18 +00:00
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
ieee80211_bss_info_change_notify(sdata, err);
|
|
|
|
return 0;
|
2007-12-19 01:03:33 +00:00
|
|
|
}
|
|
|
|
|
2012-02-13 14:17:18 +00:00
|
|
|
static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev)
|
2007-12-19 01:03:33 +00:00
|
|
|
{
|
2012-10-25 17:02:42 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_sub_if_data *vlan;
|
|
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
struct beacon_data *old_beacon;
|
|
|
|
struct probe_resp *old_probe_resp;
|
2013-11-06 12:55:51 +00:00
|
|
|
struct cfg80211_chan_def chandef;
|
2008-07-29 11:22:52 +00:00
|
|
|
|
2014-01-29 06:56:21 +00:00
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
|
2013-11-21 17:19:50 +00:00
|
|
|
old_beacon = sdata_dereference(sdata->u.ap.beacon, sdata);
|
2012-10-25 17:02:42 +00:00
|
|
|
if (!old_beacon)
|
2007-12-19 01:03:33 +00:00
|
|
|
return -ENOENT;
|
2013-11-21 17:19:50 +00:00
|
|
|
old_probe_resp = sdata_dereference(sdata->u.ap.probe_resp, sdata);
|
2007-12-19 01:03:33 +00:00
|
|
|
|
2013-07-11 14:09:06 +00:00
|
|
|
/* abort any running channel switch */
|
2014-04-09 13:10:59 +00:00
|
|
|
mutex_lock(&local->mtx);
|
2013-07-11 14:09:06 +00:00
|
|
|
sdata->vif.csa_active = false;
|
2014-06-13 13:30:07 +00:00
|
|
|
if (sdata->csa_block_tx) {
|
|
|
|
ieee80211_wake_vif_queues(local, sdata,
|
|
|
|
IEEE80211_QUEUE_STOP_REASON_CSA);
|
|
|
|
sdata->csa_block_tx = false;
|
|
|
|
}
|
|
|
|
|
2014-04-09 13:10:59 +00:00
|
|
|
mutex_unlock(&local->mtx);
|
|
|
|
|
2013-11-21 17:19:53 +00:00
|
|
|
kfree(sdata->u.ap.next_beacon);
|
|
|
|
sdata->u.ap.next_beacon = NULL;
|
|
|
|
|
2012-10-25 17:02:42 +00:00
|
|
|
/* turn off carrier for this interface and dependent VLANs */
|
2012-04-03 08:24:00 +00:00
|
|
|
list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
|
|
|
|
netif_carrier_off(vlan->dev);
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
|
2012-10-25 17:02:42 +00:00
|
|
|
/* remove beacon and probe response */
|
2011-08-01 16:19:00 +00:00
|
|
|
RCU_INIT_POINTER(sdata->u.ap.beacon, NULL);
|
2012-10-25 17:02:42 +00:00
|
|
|
RCU_INIT_POINTER(sdata->u.ap.probe_resp, NULL);
|
|
|
|
kfree_rcu(old_beacon, rcu_head);
|
|
|
|
if (old_probe_resp)
|
|
|
|
kfree_rcu(old_probe_resp, rcu_head);
|
2012-02-13 14:17:18 +00:00
|
|
|
|
2018-10-04 03:19:20 +00:00
|
|
|
kfree(sdata->vif.bss_conf.ftmr_params);
|
|
|
|
sdata->vif.bss_conf.ftmr_params = NULL;
|
|
|
|
|
2013-12-04 22:18:37 +00:00
|
|
|
__sta_info_flush(sdata, true);
|
2013-12-04 22:47:09 +00:00
|
|
|
ieee80211_free_keys(sdata, true);
|
2012-12-14 13:56:03 +00:00
|
|
|
|
2012-12-14 13:06:28 +00:00
|
|
|
sdata->vif.bss_conf.enable_beacon = false;
|
2020-04-25 15:57:12 +00:00
|
|
|
sdata->beacon_rate_set = false;
|
2013-04-10 11:47:45 +00:00
|
|
|
sdata->vif.bss_conf.ssid_len = 0;
|
2012-12-14 13:06:28 +00:00
|
|
|
clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
|
2009-04-23 14:13:26 +00:00
|
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
|
2012-02-13 14:17:18 +00:00
|
|
|
|
2013-06-11 08:44:39 +00:00
|
|
|
if (sdata->wdev.cac_started) {
|
2013-11-06 12:55:51 +00:00
|
|
|
chandef = sdata->vif.bss_conf.chandef;
|
2013-06-11 08:44:39 +00:00
|
|
|
cancel_delayed_work_sync(&sdata->dfs_cac_timer_work);
|
2013-11-06 12:55:51 +00:00
|
|
|
cfg80211_cac_event(sdata->dev, &chandef,
|
|
|
|
NL80211_RADAR_CAC_ABORTED,
|
2013-06-11 08:44:39 +00:00
|
|
|
GFP_KERNEL);
|
|
|
|
}
|
|
|
|
|
2012-10-19 13:44:42 +00:00
|
|
|
drv_stop_ap(sdata->local, sdata);
|
|
|
|
|
2012-10-25 17:02:42 +00:00
|
|
|
/* free all potentially still buffered bcast frames */
|
|
|
|
local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps.bc_buf);
|
2016-08-02 09:13:41 +00:00
|
|
|
ieee80211_purge_tx_queue(&local->hw, &sdata->u.ap.ps.bc_buf);
|
2012-10-25 17:02:42 +00:00
|
|
|
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_lock(&local->mtx);
|
2014-03-05 12:14:08 +00:00
|
|
|
ieee80211_vif_copy_chanctx_to_vlans(sdata, true);
|
2012-07-26 15:24:39 +00:00
|
|
|
ieee80211_vif_release_channel(sdata);
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_unlock(&local->mtx);
|
2012-07-26 15:24:39 +00:00
|
|
|
|
2009-04-23 14:13:26 +00:00
|
|
|
return 0;
|
2007-12-19 01:03:33 +00:00
|
|
|
}
|
|
|
|
|
nl80211/mac80211: support full station state in AP mode
Today, stations are added already associated. That is
inefficient if, for example, the driver has no room
for stations any more because then the station will
go through the entire auth/assoc handshake, only to
be kicked out afterwards.
To address this a bit better, at least with drivers
using the new station state callback, allow hostapd
to add stations in unauthenticated mode, just after
receiving the AUTH frame, before even replying. Thus
if there's no more space at that point, it can send
a negative auth frame back. It still needs to handle
later state transition errors though, of course.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-26 15:53:44 +00:00
|
|
|
static int sta_apply_auth_flags(struct ieee80211_local *local,
|
|
|
|
struct sta_info *sta,
|
|
|
|
u32 mask, u32 set)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) &&
|
|
|
|
set & BIT(NL80211_STA_FLAG_AUTHENTICATED) &&
|
|
|
|
!test_sta_flag(sta, WLAN_STA_AUTH)) {
|
|
|
|
ret = sta_info_move_state(sta, IEEE80211_STA_AUTH);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) &&
|
|
|
|
set & BIT(NL80211_STA_FLAG_ASSOCIATED) &&
|
|
|
|
!test_sta_flag(sta, WLAN_STA_ASSOC)) {
|
2015-03-08 16:04:22 +00:00
|
|
|
/*
|
|
|
|
* When peer becomes associated, init rate control as
|
|
|
|
* well. Some drivers require rate control initialized
|
|
|
|
* before drv_sta_state() is called.
|
|
|
|
*/
|
2015-09-23 08:41:27 +00:00
|
|
|
if (!test_sta_flag(sta, WLAN_STA_RATE_CONTROL))
|
2015-03-08 16:04:22 +00:00
|
|
|
rate_control_rate_init(sta);
|
|
|
|
|
nl80211/mac80211: support full station state in AP mode
Today, stations are added already associated. That is
inefficient if, for example, the driver has no room
for stations any more because then the station will
go through the entire auth/assoc handshake, only to
be kicked out afterwards.
To address this a bit better, at least with drivers
using the new station state callback, allow hostapd
to add stations in unauthenticated mode, just after
receiving the AUTH frame, before even replying. Thus
if there's no more space at that point, it can send
a negative auth frame back. It still needs to handle
later state transition errors though, of course.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-26 15:53:44 +00:00
|
|
|
ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
|
|
|
|
if (set & BIT(NL80211_STA_FLAG_AUTHORIZED))
|
|
|
|
ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
|
|
|
|
else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
|
|
|
|
ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
|
|
|
|
else
|
|
|
|
ret = 0;
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) &&
|
|
|
|
!(set & BIT(NL80211_STA_FLAG_ASSOCIATED)) &&
|
|
|
|
test_sta_flag(sta, WLAN_STA_ASSOC)) {
|
|
|
|
ret = sta_info_move_state(sta, IEEE80211_STA_AUTH);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) &&
|
|
|
|
!(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) &&
|
|
|
|
test_sta_flag(sta, WLAN_STA_AUTH)) {
|
|
|
|
ret = sta_info_move_state(sta, IEEE80211_STA_NONE);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-06-17 08:34:54 +00:00
|
|
|
static void sta_apply_mesh_params(struct ieee80211_local *local,
|
|
|
|
struct sta_info *sta,
|
|
|
|
struct station_parameters *params)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
|
|
struct ieee80211_sub_if_data *sdata = sta->sdata;
|
|
|
|
u32 changed = 0;
|
|
|
|
|
|
|
|
if (params->sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE) {
|
|
|
|
switch (params->plink_state) {
|
|
|
|
case NL80211_PLINK_ESTAB:
|
|
|
|
if (sta->mesh->plink_state != NL80211_PLINK_ESTAB)
|
|
|
|
changed = mesh_plink_inc_estab_count(sdata);
|
|
|
|
sta->mesh->plink_state = params->plink_state;
|
2016-07-01 01:19:34 +00:00
|
|
|
sta->mesh->aid = params->peer_aid;
|
2015-06-17 08:34:54 +00:00
|
|
|
|
|
|
|
ieee80211_mps_sta_status_update(sta);
|
|
|
|
changed |= ieee80211_mps_set_sta_local_pm(sta,
|
|
|
|
sdata->u.mesh.mshcfg.power_mode);
|
2019-01-15 23:31:56 +00:00
|
|
|
|
|
|
|
ewma_mesh_tx_rate_avg_init(&sta->mesh->tx_rate_avg);
|
|
|
|
/* init at low value */
|
|
|
|
ewma_mesh_tx_rate_avg_add(&sta->mesh->tx_rate_avg, 10);
|
|
|
|
|
2015-06-17 08:34:54 +00:00
|
|
|
break;
|
|
|
|
case NL80211_PLINK_LISTEN:
|
|
|
|
case NL80211_PLINK_BLOCKED:
|
|
|
|
case NL80211_PLINK_OPN_SNT:
|
|
|
|
case NL80211_PLINK_OPN_RCVD:
|
|
|
|
case NL80211_PLINK_CNF_RCVD:
|
|
|
|
case NL80211_PLINK_HOLDING:
|
|
|
|
if (sta->mesh->plink_state == NL80211_PLINK_ESTAB)
|
|
|
|
changed = mesh_plink_dec_estab_count(sdata);
|
|
|
|
sta->mesh->plink_state = params->plink_state;
|
|
|
|
|
|
|
|
ieee80211_mps_sta_status_update(sta);
|
|
|
|
changed |= ieee80211_mps_set_sta_local_pm(sta,
|
|
|
|
NL80211_MESH_POWER_UNKNOWN);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
/* nothing */
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (params->plink_action) {
|
|
|
|
case NL80211_PLINK_ACTION_NO_ACTION:
|
|
|
|
/* nothing */
|
|
|
|
break;
|
|
|
|
case NL80211_PLINK_ACTION_OPEN:
|
|
|
|
changed |= mesh_plink_open(sta);
|
|
|
|
break;
|
|
|
|
case NL80211_PLINK_ACTION_BLOCK:
|
|
|
|
changed |= mesh_plink_block(sta);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (params->local_pm)
|
|
|
|
changed |= ieee80211_mps_set_sta_local_pm(sta,
|
|
|
|
params->local_pm);
|
|
|
|
|
|
|
|
ieee80211_mbss_info_change_notify(sdata, changed);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
2011-12-14 11:35:30 +00:00
|
|
|
static int sta_apply_parameters(struct ieee80211_local *local,
|
|
|
|
struct sta_info *sta,
|
|
|
|
struct station_parameters *params)
|
2007-12-19 01:03:35 +00:00
|
|
|
{
|
2011-12-14 11:35:30 +00:00
|
|
|
int ret = 0;
|
2008-01-24 18:38:38 +00:00
|
|
|
struct ieee80211_supported_band *sband;
|
2008-02-25 15:27:46 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = sta->sdata;
|
2009-05-11 18:57:56 +00:00
|
|
|
u32 mask, set;
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2017-04-27 07:15:38 +00:00
|
|
|
sband = ieee80211_get_sband(sdata);
|
|
|
|
if (!sband)
|
|
|
|
return -EINVAL;
|
2008-10-14 14:58:37 +00:00
|
|
|
|
2009-05-11 18:57:56 +00:00
|
|
|
mask = params->sta_flags_mask;
|
|
|
|
set = params->sta_flags_set;
|
2008-02-25 15:27:47 +00:00
|
|
|
|
nl80211/mac80211: support full station state in AP mode
Today, stations are added already associated. That is
inefficient if, for example, the driver has no room
for stations any more because then the station will
go through the entire auth/assoc handshake, only to
be kicked out afterwards.
To address this a bit better, at least with drivers
using the new station state callback, allow hostapd
to add stations in unauthenticated mode, just after
receiving the AUTH frame, before even replying. Thus
if there's no more space at that point, it can send
a negative auth frame back. It still needs to handle
later state transition errors though, of course.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-26 15:53:44 +00:00
|
|
|
if (ieee80211_vif_is_mesh(&sdata->vif)) {
|
|
|
|
/*
|
|
|
|
* In mesh mode, ASSOCIATED isn't part of the nl80211
|
|
|
|
* API but must follow AUTHENTICATED for driver state.
|
|
|
|
*/
|
|
|
|
if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED))
|
|
|
|
mask |= BIT(NL80211_STA_FLAG_ASSOCIATED);
|
|
|
|
if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED))
|
|
|
|
set |= BIT(NL80211_STA_FLAG_ASSOCIATED);
|
2013-02-14 23:48:33 +00:00
|
|
|
} else if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
|
|
|
|
/*
|
|
|
|
* TDLS -- everything follows authorized, but
|
|
|
|
* only becoming authorized is possible, not
|
|
|
|
* going back
|
|
|
|
*/
|
|
|
|
if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
|
|
|
|
set |= BIT(NL80211_STA_FLAG_AUTHENTICATED) |
|
|
|
|
BIT(NL80211_STA_FLAG_ASSOCIATED);
|
|
|
|
mask |= BIT(NL80211_STA_FLAG_AUTHENTICATED) |
|
|
|
|
BIT(NL80211_STA_FLAG_ASSOCIATED);
|
|
|
|
}
|
2009-05-11 18:57:56 +00:00
|
|
|
}
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2015-03-30 13:09:20 +00:00
|
|
|
if (mask & BIT(NL80211_STA_FLAG_WME) &&
|
|
|
|
local->hw.queues >= IEEE80211_NUM_ACS)
|
|
|
|
sta->sta.wme = set & BIT(NL80211_STA_FLAG_WME);
|
|
|
|
|
2015-09-23 08:41:27 +00:00
|
|
|
/* auth flags will be set later for TDLS,
|
|
|
|
* and for unassociated stations that move to assocaited */
|
|
|
|
if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
|
|
|
|
!((mask & BIT(NL80211_STA_FLAG_ASSOCIATED)) &&
|
|
|
|
(set & BIT(NL80211_STA_FLAG_ASSOCIATED)))) {
|
2014-06-11 14:18:19 +00:00
|
|
|
ret = sta_apply_auth_flags(local, sta, mask, set);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
2011-12-14 11:35:30 +00:00
|
|
|
|
2009-05-11 18:57:56 +00:00
|
|
|
if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) {
|
|
|
|
if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE))
|
2011-09-29 14:04:36 +00:00
|
|
|
set_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE);
|
|
|
|
else
|
|
|
|
clear_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE);
|
2009-05-11 18:57:56 +00:00
|
|
|
}
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2009-05-11 18:57:56 +00:00
|
|
|
if (mask & BIT(NL80211_STA_FLAG_MFP)) {
|
2015-10-07 05:10:04 +00:00
|
|
|
sta->sta.mfp = !!(set & BIT(NL80211_STA_FLAG_MFP));
|
2009-05-11 18:57:56 +00:00
|
|
|
if (set & BIT(NL80211_STA_FLAG_MFP))
|
2011-09-29 14:04:36 +00:00
|
|
|
set_sta_flag(sta, WLAN_STA_MFP);
|
|
|
|
else
|
|
|
|
clear_sta_flag(sta, WLAN_STA_MFP);
|
2007-12-19 01:03:35 +00:00
|
|
|
}
|
2011-04-07 22:08:30 +00:00
|
|
|
|
2011-09-28 11:12:53 +00:00
|
|
|
if (mask & BIT(NL80211_STA_FLAG_TDLS_PEER)) {
|
|
|
|
if (set & BIT(NL80211_STA_FLAG_TDLS_PEER))
|
2011-09-29 14:04:36 +00:00
|
|
|
set_sta_flag(sta, WLAN_STA_TDLS_PEER);
|
|
|
|
else
|
|
|
|
clear_sta_flag(sta, WLAN_STA_TDLS_PEER);
|
2011-09-28 11:12:53 +00:00
|
|
|
}
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2014-11-09 16:50:15 +00:00
|
|
|
/* mark TDLS channel switch support, if the AP allows it */
|
|
|
|
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
|
|
|
|
!sdata->u.mgd.tdls_chan_switch_prohibited &&
|
|
|
|
params->ext_capab_len >= 4 &&
|
|
|
|
params->ext_capab[3] & WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH)
|
|
|
|
set_sta_flag(sta, WLAN_STA_TDLS_CHAN_SWITCH);
|
|
|
|
|
2015-06-10 17:42:59 +00:00
|
|
|
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
|
2015-08-15 19:39:46 +00:00
|
|
|
!sdata->u.mgd.tdls_wider_bw_prohibited &&
|
2015-06-10 17:42:59 +00:00
|
|
|
ieee80211_hw_check(&local->hw, TDLS_WIDER_BW) &&
|
|
|
|
params->ext_capab_len >= 8 &&
|
|
|
|
params->ext_capab[7] & WLAN_EXT_CAPA8_TDLS_WIDE_BW_ENABLED)
|
|
|
|
set_sta_flag(sta, WLAN_STA_TDLS_WIDER_BW);
|
|
|
|
|
2011-09-27 18:56:12 +00:00
|
|
|
if (params->sta_modify_mask & STATION_PARAM_APPLY_UAPSD) {
|
|
|
|
sta->sta.uapsd_queues = params->uapsd_queues;
|
|
|
|
sta->sta.max_sp = params->max_sp;
|
|
|
|
}
|
2011-08-23 11:37:47 +00:00
|
|
|
|
2015-12-13 13:41:05 +00:00
|
|
|
/* The sender might not have sent the last bit, consider it to be 0 */
|
|
|
|
if (params->ext_capab_len >= 8) {
|
|
|
|
u8 val = (params->ext_capab[7] &
|
|
|
|
WLAN_EXT_CAPA8_MAX_MSDU_IN_AMSDU_LSB) >> 7;
|
|
|
|
|
|
|
|
/* we did get all the bits, take the MSB as well */
|
|
|
|
if (params->ext_capab_len >= 9) {
|
|
|
|
u8 val_msb = params->ext_capab[8] &
|
|
|
|
WLAN_EXT_CAPA9_MAX_MSDU_IN_AMSDU_MSB;
|
|
|
|
val_msb <<= 1;
|
|
|
|
val |= val_msb;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (val) {
|
|
|
|
case 1:
|
|
|
|
sta->sta.max_amsdu_subframes = 32;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
sta->sta.max_amsdu_subframes = 16;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
sta->sta.max_amsdu_subframes = 8;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
sta->sta.max_amsdu_subframes = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-05-24 14:42:30 +00:00
|
|
|
/*
|
|
|
|
* cfg80211 validates this (1-2007) and allows setting the AID
|
|
|
|
* only when creating a new station entry
|
|
|
|
*/
|
|
|
|
if (params->aid)
|
|
|
|
sta->sta.aid = params->aid;
|
|
|
|
|
2008-02-25 15:27:47 +00:00
|
|
|
/*
|
2012-12-27 16:32:09 +00:00
|
|
|
* Some of the following updates would be racy if called on an
|
|
|
|
* existing station, via ieee80211_change_station(). However,
|
|
|
|
* all such changes are rejected by cfg80211 except for updates
|
|
|
|
* changing the supported rates on an existing but not yet used
|
|
|
|
* TDLS peer.
|
2008-02-25 15:27:47 +00:00
|
|
|
*/
|
|
|
|
|
2007-12-19 01:03:35 +00:00
|
|
|
if (params->listen_interval >= 0)
|
|
|
|
sta->listen_interval = params->listen_interval;
|
|
|
|
|
2019-03-29 10:49:09 +00:00
|
|
|
if (params->sta_modify_mask & STATION_PARAM_APPLY_STA_TXPOWER) {
|
|
|
|
sta->sta.txpwr.type = params->txpwr.type;
|
|
|
|
if (params->txpwr.type == NL80211_TX_POWER_LIMITED)
|
|
|
|
sta->sta.txpwr.power = params->txpwr.power;
|
|
|
|
ret = drv_sta_set_txpwr(local, sdata, sta);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
mac80211: use STA info in rate_control_send_low()
Even if we have a station, we currently call rate_control_send_low()
with the NULL station unless further rate control (driver, minstrel)
has been initialized.
Change this so we can use more information about the station to use
a better rate. For example, when we associate with an AP, we will
now use the lowest rate it advertised as supported (that we can)
rather than the lowest mandatory rate. This aligns our behaviour
with most other 802.11 implementations.
To make this possible, we need to also ensure that we have non-zero
rates at all times, so in case we really have *nothing* pre-fill
the supp_rates bitmap with the very lowest mandatory bitmap (11b
and 11a on 2.4 and 5 GHz respectively).
Additionally, hostapd appears to be giving us an empty supported
rates bitmap (it can and should do better, since the STA must have
supported for at least the basic rates in the BSS), so ignore any
such bitmaps that would actually zero out the supp_rates, and in
that case just keep the pre-filled mandatory rates.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-05-29 12:25:35 +00:00
|
|
|
if (params->supported_rates && params->supported_rates_len) {
|
2013-07-08 14:55:53 +00:00
|
|
|
ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef,
|
|
|
|
sband, params->supported_rates,
|
|
|
|
params->supported_rates_len,
|
2017-04-27 07:15:38 +00:00
|
|
|
&sta->sta.supp_rates[sband->band]);
|
2007-12-19 01:03:35 +00:00
|
|
|
}
|
2008-02-23 14:17:17 +00:00
|
|
|
|
2008-10-09 10:13:49 +00:00
|
|
|
if (params->ht_capa)
|
2011-11-18 19:32:00 +00:00
|
|
|
ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
|
2013-02-07 10:47:44 +00:00
|
|
|
params->ht_capa, sta);
|
2008-08-25 08:58:58 +00:00
|
|
|
|
2015-12-13 13:41:05 +00:00
|
|
|
/* VHT can override some HT caps such as the A-MSDU max length */
|
2012-10-11 08:04:52 +00:00
|
|
|
if (params->vht_capa)
|
|
|
|
ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
|
2013-02-07 10:58:58 +00:00
|
|
|
params->vht_capa, sta);
|
2012-10-11 08:04:52 +00:00
|
|
|
|
2018-06-09 06:14:44 +00:00
|
|
|
if (params->he_capa)
|
|
|
|
ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband,
|
|
|
|
(void *)params->he_capa,
|
2020-05-28 19:34:38 +00:00
|
|
|
params->he_capa_len,
|
|
|
|
(void *)params->he_6ghz_capa,
|
|
|
|
sta);
|
2018-06-09 06:14:44 +00:00
|
|
|
|
2014-02-03 13:44:44 +00:00
|
|
|
if (params->opmode_notif_used) {
|
|
|
|
/* returned value is only needed for rc update, but the
|
|
|
|
* rc isn't initialized here yet, so ignore it
|
|
|
|
*/
|
2017-04-27 07:15:38 +00:00
|
|
|
__ieee80211_vht_handle_opmode(sdata, sta, params->opmode_notif,
|
|
|
|
sband->band);
|
2014-02-03 13:44:44 +00:00
|
|
|
}
|
|
|
|
|
2016-03-17 13:41:39 +00:00
|
|
|
if (params->support_p2p_ps >= 0)
|
|
|
|
sta->sta.support_p2p_ps = params->support_p2p_ps;
|
|
|
|
|
2015-06-17 08:34:54 +00:00
|
|
|
if (ieee80211_vif_is_mesh(&sdata->vif))
|
|
|
|
sta_apply_mesh_params(local, sta, params);
|
2011-12-14 11:35:30 +00:00
|
|
|
|
2018-12-19 01:02:08 +00:00
|
|
|
if (params->airtime_weight)
|
|
|
|
sta->airtime_weight = params->airtime_weight;
|
|
|
|
|
2014-06-11 14:18:19 +00:00
|
|
|
/* set the STA state after all sta info from usermode has been set */
|
2015-09-23 08:41:27 +00:00
|
|
|
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) ||
|
|
|
|
set & BIT(NL80211_STA_FLAG_ASSOCIATED)) {
|
2014-06-11 14:18:19 +00:00
|
|
|
ret = sta_apply_auth_flags(local, sta, mask, set);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2011-12-14 11:35:30 +00:00
|
|
|
return 0;
|
2007-12-19 01:03:35 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
|
2014-05-19 15:19:31 +00:00
|
|
|
const u8 *mac,
|
|
|
|
struct station_parameters *params)
|
2007-12-19 01:03:35 +00:00
|
|
|
{
|
2008-07-29 11:22:52 +00:00
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2007-12-19 01:03:35 +00:00
|
|
|
struct sta_info *sta;
|
|
|
|
struct ieee80211_sub_if_data *sdata;
|
2008-02-25 15:27:47 +00:00
|
|
|
int err;
|
2007-12-19 01:03:35 +00:00
|
|
|
|
|
|
|
if (params->vlan) {
|
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
|
|
|
|
|
2008-09-10 22:01:58 +00:00
|
|
|
if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
|
|
|
|
sdata->vif.type != NL80211_IFTYPE_AP)
|
2007-12-19 01:03:35 +00:00
|
|
|
return -EINVAL;
|
|
|
|
} else
|
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
mac80211: Convert compare_ether_addr to ether_addr_equal
Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.
Done via cocci script:
$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
- !compare_ether_addr(a, b)
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- compare_ether_addr(a, b)
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) == 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) != 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) == 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) != 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !!ether_addr_equal(a, b)
+ ether_addr_equal(a, b)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08 18:56:52 +00:00
|
|
|
if (ether_addr_equal(mac, sdata->vif.addr))
|
2008-02-27 08:56:40 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2019-07-24 09:16:10 +00:00
|
|
|
if (!is_valid_ether_addr(mac))
|
2008-02-27 08:56:40 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
2019-08-01 07:30:33 +00:00
|
|
|
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER) &&
|
|
|
|
sdata->vif.type == NL80211_IFTYPE_STATION &&
|
|
|
|
!sdata->u.mgd.associated)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2008-02-27 08:56:40 +00:00
|
|
|
sta = sta_info_alloc(sdata, mac, GFP_KERNEL);
|
2008-02-25 15:27:47 +00:00
|
|
|
if (!sta)
|
|
|
|
return -ENOMEM;
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2015-09-23 08:41:27 +00:00
|
|
|
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
|
|
|
|
sta->sta.tdls = true;
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2011-12-14 11:35:30 +00:00
|
|
|
err = sta_apply_parameters(local, sta, params);
|
|
|
|
if (err) {
|
|
|
|
sta_info_free(local, sta);
|
|
|
|
return err;
|
|
|
|
}
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2011-11-07 21:24:39 +00:00
|
|
|
/*
|
2015-09-23 08:41:27 +00:00
|
|
|
* for TDLS and for unassociated station, rate control should be
|
|
|
|
* initialized only when rates are known and station is marked
|
|
|
|
* authorized/associated
|
2011-11-07 21:24:39 +00:00
|
|
|
*/
|
2015-09-23 08:41:27 +00:00
|
|
|
if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
|
|
|
|
test_sta_flag(sta, WLAN_STA_ASSOC))
|
2011-11-07 21:24:39 +00:00
|
|
|
rate_control_rate_init(sta);
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2010-02-03 12:59:58 +00:00
|
|
|
err = sta_info_insert_rcu(sta);
|
2008-02-25 15:27:47 +00:00
|
|
|
if (err) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
2007-12-19 01:03:35 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
|
2014-10-10 17:52:40 +00:00
|
|
|
struct station_del_parameters *params)
|
2007-12-19 01:03:35 +00:00
|
|
|
{
|
2008-07-29 11:22:52 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2008-07-29 11:22:52 +00:00
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
2014-10-10 17:52:40 +00:00
|
|
|
if (params->mac)
|
|
|
|
return sta_info_destroy_addr_bss(sdata, params->mac);
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2012-12-13 22:07:46 +00:00
|
|
|
sta_info_flush(sdata);
|
2007-12-19 01:03:35 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_change_station(struct wiphy *wiphy,
|
2014-05-19 15:19:31 +00:00
|
|
|
struct net_device *dev, const u8 *mac,
|
2007-12-19 01:03:35 +00:00
|
|
|
struct station_parameters *params)
|
|
|
|
{
|
2009-11-25 16:46:18 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2008-07-29 11:22:52 +00:00
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2007-12-19 01:03:35 +00:00
|
|
|
struct sta_info *sta;
|
|
|
|
struct ieee80211_sub_if_data *vlansdata;
|
2013-02-14 23:48:33 +00:00
|
|
|
enum cfg80211_station_type statype;
|
2011-12-29 12:41:39 +00:00
|
|
|
int err;
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2011-12-14 11:20:29 +00:00
|
|
|
mutex_lock(&local->sta_mtx);
|
2008-04-10 13:36:09 +00:00
|
|
|
|
2010-01-08 17:10:58 +00:00
|
|
|
sta = sta_info_get_bss(sdata, mac);
|
2008-04-10 13:36:09 +00:00
|
|
|
if (!sta) {
|
2013-02-14 23:48:33 +00:00
|
|
|
err = -ENOENT;
|
|
|
|
goto out_err;
|
2008-04-10 13:36:09 +00:00
|
|
|
}
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2013-02-14 23:48:33 +00:00
|
|
|
switch (sdata->vif.type) {
|
|
|
|
case NL80211_IFTYPE_MESH_POINT:
|
2013-03-04 21:06:12 +00:00
|
|
|
if (sdata->u.mesh.user_mpm)
|
2013-03-04 21:06:11 +00:00
|
|
|
statype = CFG80211_STA_MESH_PEER_USER;
|
2013-02-14 23:48:33 +00:00
|
|
|
else
|
2013-03-04 21:06:11 +00:00
|
|
|
statype = CFG80211_STA_MESH_PEER_KERNEL;
|
2013-02-14 23:48:33 +00:00
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_ADHOC:
|
|
|
|
statype = CFG80211_STA_IBSS;
|
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_STATION:
|
|
|
|
if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
|
|
|
|
statype = CFG80211_STA_AP_STA;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
|
|
|
|
statype = CFG80211_STA_TDLS_PEER_ACTIVE;
|
|
|
|
else
|
|
|
|
statype = CFG80211_STA_TDLS_PEER_SETUP;
|
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_AP:
|
|
|
|
case NL80211_IFTYPE_AP_VLAN:
|
2015-09-23 08:41:27 +00:00
|
|
|
if (test_sta_flag(sta, WLAN_STA_ASSOC))
|
|
|
|
statype = CFG80211_STA_AP_CLIENT;
|
|
|
|
else
|
|
|
|
statype = CFG80211_STA_AP_CLIENT_UNASSOC;
|
2013-02-14 23:48:33 +00:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
err = -EOPNOTSUPP;
|
|
|
|
goto out_err;
|
2011-12-14 11:20:27 +00:00
|
|
|
}
|
|
|
|
|
2013-02-14 23:48:33 +00:00
|
|
|
err = cfg80211_check_station_change(wiphy, params, statype);
|
|
|
|
if (err)
|
|
|
|
goto out_err;
|
|
|
|
|
2008-02-25 15:27:46 +00:00
|
|
|
if (params->vlan && params->vlan != sta->sdata->dev) {
|
2007-12-19 01:03:35 +00:00
|
|
|
vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
|
|
|
|
|
2009-11-19 10:55:19 +00:00
|
|
|
if (params->vlan->ieee80211_ptr->use_4addr) {
|
2009-11-20 09:09:14 +00:00
|
|
|
if (vlansdata->u.vlan.sta) {
|
2013-02-14 23:48:33 +00:00
|
|
|
err = -EBUSY;
|
|
|
|
goto out_err;
|
2009-11-20 09:09:14 +00:00
|
|
|
}
|
2009-11-10 19:10:05 +00:00
|
|
|
|
2012-01-12 04:41:32 +00:00
|
|
|
rcu_assign_pointer(vlansdata->u.vlan.sta, sta);
|
2016-03-31 17:02:10 +00:00
|
|
|
__ieee80211_check_fast_rx_iface(vlansdata);
|
2012-04-23 17:49:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
|
2016-10-10 17:12:21 +00:00
|
|
|
sta->sdata->u.vlan.sta)
|
2014-03-23 19:21:43 +00:00
|
|
|
RCU_INIT_POINTER(sta->sdata->u.vlan.sta, NULL);
|
2016-10-10 17:12:21 +00:00
|
|
|
|
|
|
|
if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
|
|
|
|
ieee80211_vif_dec_num_mcast(sta->sdata);
|
2009-11-10 19:10:05 +00:00
|
|
|
|
2008-07-29 11:22:52 +00:00
|
|
|
sta->sdata = vlansdata;
|
2015-05-19 12:13:36 +00:00
|
|
|
ieee80211_check_fast_xmit(sta);
|
2012-04-23 17:49:03 +00:00
|
|
|
|
mac80211: Do not send Layer 2 Update frame before authorization
The Layer 2 Update frame is used to update bridges when a station roams
to another AP even if that STA does not transmit any frames after the
reassociation. This behavior was described in IEEE Std 802.11F-2003 as
something that would happen based on MLME-ASSOCIATE.indication, i.e.,
before completing 4-way handshake. However, this IEEE trial-use
recommended practice document was published before RSN (IEEE Std
802.11i-2004) and as such, did not consider RSN use cases. Furthermore,
IEEE Std 802.11F-2003 was withdrawn in 2006 and as such, has not been
maintained amd should not be used anymore.
Sending out the Layer 2 Update frame immediately after association is
fine for open networks (and also when using SAE, FT protocol, or FILS
authentication when the station is actually authenticated by the time
association completes). However, it is not appropriate for cases where
RSN is used with PSK or EAP authentication since the station is actually
fully authenticated only once the 4-way handshake completes after
authentication and attackers might be able to use the unauthenticated
triggering of Layer 2 Update frame transmission to disrupt bridge
behavior.
Fix this by postponing transmission of the Layer 2 Update frame from
station entry addition to the point when the station entry is marked
authorized. Similarly, send out the VLAN binding update only if the STA
entry has already been authorized.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 13:03:05 +00:00
|
|
|
if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) {
|
2016-10-10 17:12:21 +00:00
|
|
|
ieee80211_vif_inc_num_mcast(sta->sdata);
|
mac80211: Do not send Layer 2 Update frame before authorization
The Layer 2 Update frame is used to update bridges when a station roams
to another AP even if that STA does not transmit any frames after the
reassociation. This behavior was described in IEEE Std 802.11F-2003 as
something that would happen based on MLME-ASSOCIATE.indication, i.e.,
before completing 4-way handshake. However, this IEEE trial-use
recommended practice document was published before RSN (IEEE Std
802.11i-2004) and as such, did not consider RSN use cases. Furthermore,
IEEE Std 802.11F-2003 was withdrawn in 2006 and as such, has not been
maintained amd should not be used anymore.
Sending out the Layer 2 Update frame immediately after association is
fine for open networks (and also when using SAE, FT protocol, or FILS
authentication when the station is actually authenticated by the time
association completes). However, it is not appropriate for cases where
RSN is used with PSK or EAP authentication since the station is actually
fully authenticated only once the 4-way handshake completes after
authentication and attackers might be able to use the unauthenticated
triggering of Layer 2 Update frame transmission to disrupt bridge
behavior.
Fix this by postponing transmission of the Layer 2 Update frame from
station entry addition to the point when the station entry is marked
authorized. Similarly, send out the VLAN binding update only if the STA
entry has already been authorized.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 13:03:05 +00:00
|
|
|
cfg80211_send_layer2_update(sta->sdata->dev,
|
|
|
|
sta->sta.addr);
|
|
|
|
}
|
2007-12-19 01:03:35 +00:00
|
|
|
}
|
|
|
|
|
2011-12-29 12:41:39 +00:00
|
|
|
err = sta_apply_parameters(local, sta, params);
|
2013-02-14 23:48:33 +00:00
|
|
|
if (err)
|
|
|
|
goto out_err;
|
2007-12-19 01:03:35 +00:00
|
|
|
|
2011-12-14 11:20:29 +00:00
|
|
|
mutex_unlock(&local->sta_mtx);
|
2008-04-10 13:36:09 +00:00
|
|
|
|
2011-03-11 00:43:19 +00:00
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
|
2012-07-27 09:33:22 +00:00
|
|
|
params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
|
2015-10-14 16:02:43 +00:00
|
|
|
ieee80211_recalc_ps(local);
|
2012-07-27 09:33:22 +00:00
|
|
|
ieee80211_recalc_ps_vif(sdata);
|
|
|
|
}
|
2013-02-14 23:48:33 +00:00
|
|
|
|
2007-12-19 01:03:35 +00:00
|
|
|
return 0;
|
2013-02-14 23:48:33 +00:00
|
|
|
out_err:
|
|
|
|
mutex_unlock(&local->sta_mtx);
|
|
|
|
return err;
|
2007-12-19 01:03:35 +00:00
|
|
|
}
|
|
|
|
|
2008-02-23 14:17:17 +00:00
|
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
|
|
static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
|
2014-05-19 15:19:31 +00:00
|
|
|
const u8 *dst, const u8 *next_hop)
|
2008-02-23 14:17:17 +00:00
|
|
|
{
|
2008-07-29 11:22:52 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
2008-02-23 14:17:17 +00:00
|
|
|
struct mesh_path *mpath;
|
|
|
|
struct sta_info *sta;
|
|
|
|
|
2008-07-29 11:22:52 +00:00
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
2008-02-25 15:27:46 +00:00
|
|
|
rcu_read_lock();
|
2009-11-25 16:46:18 +00:00
|
|
|
sta = sta_info_get(sdata, next_hop);
|
2008-02-25 15:27:46 +00:00
|
|
|
if (!sta) {
|
|
|
|
rcu_read_unlock();
|
2008-02-23 14:17:17 +00:00
|
|
|
return -ENOENT;
|
2008-02-25 15:27:46 +00:00
|
|
|
}
|
2008-02-23 14:17:17 +00:00
|
|
|
|
2013-03-29 13:38:39 +00:00
|
|
|
mpath = mesh_path_add(sdata, dst);
|
|
|
|
if (IS_ERR(mpath)) {
|
2008-02-25 15:27:46 +00:00
|
|
|
rcu_read_unlock();
|
2013-03-29 13:38:39 +00:00
|
|
|
return PTR_ERR(mpath);
|
2008-02-25 15:27:46 +00:00
|
|
|
}
|
2008-02-23 14:17:17 +00:00
|
|
|
|
|
|
|
mesh_path_fix_nexthop(mpath, sta);
|
2008-02-25 15:27:46 +00:00
|
|
|
|
2008-02-23 14:17:17 +00:00
|
|
|
rcu_read_unlock();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev,
|
2014-05-19 15:19:31 +00:00
|
|
|
const u8 *dst)
|
2008-02-23 14:17:17 +00:00
|
|
|
{
|
2008-08-03 00:04:37 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
2008-02-23 14:17:17 +00:00
|
|
|
if (dst)
|
2013-02-15 13:40:31 +00:00
|
|
|
return mesh_path_del(sdata, dst);
|
2008-02-23 14:17:17 +00:00
|
|
|
|
2011-08-29 20:23:04 +00:00
|
|
|
mesh_path_flush_by_iface(sdata);
|
2008-02-23 14:17:17 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-05-19 15:19:31 +00:00
|
|
|
static int ieee80211_change_mpath(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
const u8 *dst, const u8 *next_hop)
|
2008-02-23 14:17:17 +00:00
|
|
|
{
|
2008-07-29 11:22:52 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
2008-02-23 14:17:17 +00:00
|
|
|
struct mesh_path *mpath;
|
|
|
|
struct sta_info *sta;
|
|
|
|
|
2008-07-29 11:22:52 +00:00
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
2008-02-25 15:27:46 +00:00
|
|
|
rcu_read_lock();
|
|
|
|
|
2009-11-25 16:46:18 +00:00
|
|
|
sta = sta_info_get(sdata, next_hop);
|
2008-02-25 15:27:46 +00:00
|
|
|
if (!sta) {
|
|
|
|
rcu_read_unlock();
|
2008-02-23 14:17:17 +00:00
|
|
|
return -ENOENT;
|
2008-02-25 15:27:46 +00:00
|
|
|
}
|
2008-02-23 14:17:17 +00:00
|
|
|
|
2013-02-15 13:40:31 +00:00
|
|
|
mpath = mesh_path_lookup(sdata, dst);
|
2008-02-23 14:17:17 +00:00
|
|
|
if (!mpath) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
mesh_path_fix_nexthop(mpath, sta);
|
2008-02-25 15:27:46 +00:00
|
|
|
|
2008-02-23 14:17:17 +00:00
|
|
|
rcu_read_unlock();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop,
|
|
|
|
struct mpath_info *pinfo)
|
|
|
|
{
|
2011-05-12 13:11:37 +00:00
|
|
|
struct sta_info *next_hop_sta = rcu_dereference(mpath->next_hop);
|
|
|
|
|
|
|
|
if (next_hop_sta)
|
|
|
|
memcpy(next_hop, next_hop_sta->sta.addr, ETH_ALEN);
|
2008-02-23 14:17:17 +00:00
|
|
|
else
|
2015-03-03 03:54:57 +00:00
|
|
|
eth_zero_addr(next_hop);
|
2008-02-23 14:17:17 +00:00
|
|
|
|
2012-08-27 13:28:16 +00:00
|
|
|
memset(pinfo, 0, sizeof(*pinfo));
|
|
|
|
|
2016-02-29 01:03:56 +00:00
|
|
|
pinfo->generation = mpath->sdata->u.mesh.mesh_paths_generation;
|
2009-08-07 14:17:38 +00:00
|
|
|
|
2008-02-23 14:17:17 +00:00
|
|
|
pinfo->filled = MPATH_INFO_FRAME_QLEN |
|
2009-11-09 23:46:55 +00:00
|
|
|
MPATH_INFO_SN |
|
2008-02-23 14:17:17 +00:00
|
|
|
MPATH_INFO_METRIC |
|
|
|
|
MPATH_INFO_EXPTIME |
|
|
|
|
MPATH_INFO_DISCOVERY_TIMEOUT |
|
|
|
|
MPATH_INFO_DISCOVERY_RETRIES |
|
2019-01-15 23:28:42 +00:00
|
|
|
MPATH_INFO_FLAGS |
|
2019-01-15 23:28:43 +00:00
|
|
|
MPATH_INFO_HOP_COUNT |
|
|
|
|
MPATH_INFO_PATH_CHANGE;
|
2008-02-23 14:17:17 +00:00
|
|
|
|
|
|
|
pinfo->frame_qlen = mpath->frame_queue.qlen;
|
2009-11-09 23:46:55 +00:00
|
|
|
pinfo->sn = mpath->sn;
|
2008-02-23 14:17:17 +00:00
|
|
|
pinfo->metric = mpath->metric;
|
|
|
|
if (time_before(jiffies, mpath->exp_time))
|
|
|
|
pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies);
|
|
|
|
pinfo->discovery_timeout =
|
|
|
|
jiffies_to_msecs(mpath->discovery_timeout);
|
|
|
|
pinfo->discovery_retries = mpath->discovery_retries;
|
|
|
|
if (mpath->flags & MESH_PATH_ACTIVE)
|
|
|
|
pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE;
|
|
|
|
if (mpath->flags & MESH_PATH_RESOLVING)
|
|
|
|
pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
|
2009-11-09 23:46:55 +00:00
|
|
|
if (mpath->flags & MESH_PATH_SN_VALID)
|
|
|
|
pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID;
|
2008-02-23 14:17:17 +00:00
|
|
|
if (mpath->flags & MESH_PATH_FIXED)
|
|
|
|
pinfo->flags |= NL80211_MPATH_FLAG_FIXED;
|
2012-08-27 13:28:16 +00:00
|
|
|
if (mpath->flags & MESH_PATH_RESOLVED)
|
|
|
|
pinfo->flags |= NL80211_MPATH_FLAG_RESOLVED;
|
2019-01-15 23:28:42 +00:00
|
|
|
pinfo->hop_count = mpath->hop_count;
|
2019-01-15 23:28:43 +00:00
|
|
|
pinfo->path_change_count = mpath->path_change_count;
|
2008-02-23 14:17:17 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
|
|
|
|
|
|
|
|
{
|
2008-07-29 11:22:52 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
2008-02-23 14:17:17 +00:00
|
|
|
struct mesh_path *mpath;
|
|
|
|
|
2008-07-29 11:22:52 +00:00
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
2008-02-23 14:17:17 +00:00
|
|
|
rcu_read_lock();
|
2013-02-15 13:40:31 +00:00
|
|
|
mpath = mesh_path_lookup(sdata, dst);
|
2008-02-23 14:17:17 +00:00
|
|
|
if (!mpath) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
memcpy(dst, mpath->dst, ETH_ALEN);
|
|
|
|
mpath_set_pinfo(mpath, next_hop, pinfo);
|
|
|
|
rcu_read_unlock();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
|
2014-05-19 15:19:31 +00:00
|
|
|
int idx, u8 *dst, u8 *next_hop,
|
|
|
|
struct mpath_info *pinfo)
|
2008-02-23 14:17:17 +00:00
|
|
|
{
|
2008-07-29 11:22:52 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
2008-02-23 14:17:17 +00:00
|
|
|
struct mesh_path *mpath;
|
|
|
|
|
2008-07-29 11:22:52 +00:00
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
2008-02-23 14:17:17 +00:00
|
|
|
rcu_read_lock();
|
2013-02-15 13:40:31 +00:00
|
|
|
mpath = mesh_path_lookup_by_idx(sdata, idx);
|
2008-02-23 14:17:17 +00:00
|
|
|
if (!mpath) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
memcpy(dst, mpath->dst, ETH_ALEN);
|
|
|
|
mpath_set_pinfo(mpath, next_hop, pinfo);
|
|
|
|
rcu_read_unlock();
|
|
|
|
return 0;
|
|
|
|
}
|
2008-10-21 19:03:48 +00:00
|
|
|
|
2014-09-12 06:58:50 +00:00
|
|
|
static void mpp_set_pinfo(struct mesh_path *mpath, u8 *mpp,
|
|
|
|
struct mpath_info *pinfo)
|
|
|
|
{
|
|
|
|
memset(pinfo, 0, sizeof(*pinfo));
|
|
|
|
memcpy(mpp, mpath->mpp, ETH_ALEN);
|
|
|
|
|
2016-02-29 01:03:56 +00:00
|
|
|
pinfo->generation = mpath->sdata->u.mesh.mpp_paths_generation;
|
2014-09-12 06:58:50 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_get_mpp(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
u8 *dst, u8 *mpp, struct mpath_info *pinfo)
|
|
|
|
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
struct mesh_path *mpath;
|
|
|
|
|
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
mpath = mpp_path_lookup(sdata, dst);
|
|
|
|
if (!mpath) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
memcpy(dst, mpath->dst, ETH_ALEN);
|
|
|
|
mpp_set_pinfo(mpath, mpp, pinfo);
|
|
|
|
rcu_read_unlock();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_dump_mpp(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
int idx, u8 *dst, u8 *mpp,
|
|
|
|
struct mpath_info *pinfo)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
struct mesh_path *mpath;
|
|
|
|
|
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
mpath = mpp_path_lookup_by_idx(sdata, idx);
|
|
|
|
if (!mpath) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
memcpy(dst, mpath->dst, ETH_ALEN);
|
|
|
|
mpp_set_pinfo(mpath, mpp, pinfo);
|
|
|
|
rcu_read_unlock();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2010-12-17 01:37:48 +00:00
|
|
|
static int ieee80211_get_mesh_config(struct wiphy *wiphy,
|
2008-10-21 19:03:48 +00:00
|
|
|
struct net_device *dev,
|
|
|
|
struct mesh_config *conf)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config));
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask)
|
|
|
|
{
|
|
|
|
return (mask >> (parm-1)) & 0x1;
|
|
|
|
}
|
|
|
|
|
2010-12-17 01:37:49 +00:00
|
|
|
static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
|
|
|
|
const struct mesh_setup *setup)
|
|
|
|
{
|
|
|
|
u8 *new_ie;
|
|
|
|
const u8 *old_ie;
|
2011-11-25 01:15:20 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = container_of(ifmsh,
|
|
|
|
struct ieee80211_sub_if_data, u.mesh);
|
2020-04-25 15:57:12 +00:00
|
|
|
int i;
|
2010-12-17 01:37:49 +00:00
|
|
|
|
2011-04-07 22:08:27 +00:00
|
|
|
/* allocate information elements */
|
2010-12-17 01:37:49 +00:00
|
|
|
new_ie = NULL;
|
2011-04-07 22:08:27 +00:00
|
|
|
old_ie = ifmsh->ie;
|
2010-12-17 01:37:49 +00:00
|
|
|
|
2011-04-07 22:08:27 +00:00
|
|
|
if (setup->ie_len) {
|
|
|
|
new_ie = kmemdup(setup->ie, setup->ie_len,
|
2010-12-17 01:37:49 +00:00
|
|
|
GFP_KERNEL);
|
|
|
|
if (!new_ie)
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
2011-04-07 22:08:27 +00:00
|
|
|
ifmsh->ie_len = setup->ie_len;
|
|
|
|
ifmsh->ie = new_ie;
|
|
|
|
kfree(old_ie);
|
2010-12-17 01:37:49 +00:00
|
|
|
|
|
|
|
/* now copy the rest of the setup parameters */
|
|
|
|
ifmsh->mesh_id_len = setup->mesh_id_len;
|
|
|
|
memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len);
|
2012-03-31 18:31:33 +00:00
|
|
|
ifmsh->mesh_sp_id = setup->sync_method;
|
2010-12-17 01:37:49 +00:00
|
|
|
ifmsh->mesh_pp_id = setup->path_sel_proto;
|
|
|
|
ifmsh->mesh_pm_id = setup->path_metric;
|
2013-03-04 21:06:12 +00:00
|
|
|
ifmsh->user_mpm = setup->user_mpm;
|
2013-05-08 18:46:00 +00:00
|
|
|
ifmsh->mesh_auth_id = setup->auth_id;
|
2011-05-03 23:57:07 +00:00
|
|
|
ifmsh->security = IEEE80211_MESH_SEC_NONE;
|
2017-05-16 09:23:13 +00:00
|
|
|
ifmsh->userspace_handles_dfs = setup->userspace_handles_dfs;
|
2011-05-03 23:57:07 +00:00
|
|
|
if (setup->is_authenticated)
|
|
|
|
ifmsh->security |= IEEE80211_MESH_SEC_AUTHED;
|
|
|
|
if (setup->is_secure)
|
|
|
|
ifmsh->security |= IEEE80211_MESH_SEC_SECURED;
|
2010-12-17 01:37:49 +00:00
|
|
|
|
2011-11-25 01:15:20 +00:00
|
|
|
/* mcast rate setting in Mesh Node */
|
|
|
|
memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate,
|
|
|
|
sizeof(setup->mcast_rate));
|
2013-06-03 17:33:36 +00:00
|
|
|
sdata->vif.bss_conf.basic_rates = setup->basic_rates;
|
2011-11-25 01:15:20 +00:00
|
|
|
|
2013-01-07 15:04:51 +00:00
|
|
|
sdata->vif.bss_conf.beacon_int = setup->beacon_interval;
|
|
|
|
sdata->vif.bss_conf.dtim_period = setup->dtim_period;
|
|
|
|
|
2020-04-25 15:57:12 +00:00
|
|
|
sdata->beacon_rate_set = false;
|
|
|
|
if (wiphy_ext_feature_isset(sdata->local->hw.wiphy,
|
|
|
|
NL80211_EXT_FEATURE_BEACON_RATE_LEGACY)) {
|
|
|
|
for (i = 0; i < NUM_NL80211_BANDS; i++) {
|
|
|
|
sdata->beacon_rateidx_mask[i] =
|
|
|
|
setup->beacon_rate.control[i].legacy;
|
|
|
|
if (sdata->beacon_rateidx_mask[i])
|
|
|
|
sdata->beacon_rate_set = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2010-12-17 01:37:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2010-12-17 01:37:48 +00:00
|
|
|
static int ieee80211_update_mesh_config(struct wiphy *wiphy,
|
2010-12-03 08:20:44 +00:00
|
|
|
struct net_device *dev, u32 mask,
|
|
|
|
const struct mesh_config *nconf)
|
2008-10-21 19:03:48 +00:00
|
|
|
{
|
|
|
|
struct mesh_config *conf;
|
|
|
|
struct ieee80211_sub_if_data *sdata;
|
2009-11-09 23:46:57 +00:00
|
|
|
struct ieee80211_if_mesh *ifmsh;
|
|
|
|
|
2008-10-21 19:03:48 +00:00
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2009-11-09 23:46:57 +00:00
|
|
|
ifmsh = &sdata->u.mesh;
|
2008-10-21 19:03:48 +00:00
|
|
|
|
|
|
|
/* Set the config options which we are interested in setting */
|
|
|
|
conf = &(sdata->u.mesh.mshcfg);
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask))
|
|
|
|
conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout;
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask))
|
|
|
|
conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout;
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask))
|
|
|
|
conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout;
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask))
|
|
|
|
conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks;
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask))
|
|
|
|
conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries;
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask))
|
|
|
|
conf->dot11MeshTTL = nconf->dot11MeshTTL;
|
2010-12-03 08:20:40 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_ELEMENT_TTL, mask))
|
2012-06-14 16:23:53 +00:00
|
|
|
conf->element_ttl = nconf->element_ttl;
|
2013-03-04 21:06:14 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask)) {
|
|
|
|
if (ifmsh->user_mpm)
|
|
|
|
return -EBUSY;
|
2008-10-21 19:03:48 +00:00
|
|
|
conf->auto_open_plinks = nconf->auto_open_plinks;
|
2013-03-04 21:06:14 +00:00
|
|
|
}
|
2012-03-31 18:31:33 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, mask))
|
|
|
|
conf->dot11MeshNbrOffsetMaxNeighbor =
|
|
|
|
nconf->dot11MeshNbrOffsetMaxNeighbor;
|
2008-10-21 19:03:48 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask))
|
|
|
|
conf->dot11MeshHWMPmaxPREQretries =
|
|
|
|
nconf->dot11MeshHWMPmaxPREQretries;
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask))
|
|
|
|
conf->path_refresh_time = nconf->path_refresh_time;
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask))
|
|
|
|
conf->min_discovery_timeout = nconf->min_discovery_timeout;
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask))
|
|
|
|
conf->dot11MeshHWMPactivePathTimeout =
|
|
|
|
nconf->dot11MeshHWMPactivePathTimeout;
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask))
|
|
|
|
conf->dot11MeshHWMPpreqMinInterval =
|
|
|
|
nconf->dot11MeshHWMPpreqMinInterval;
|
2011-11-25 01:15:24 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, mask))
|
|
|
|
conf->dot11MeshHWMPperrMinInterval =
|
|
|
|
nconf->dot11MeshHWMPperrMinInterval;
|
2008-10-21 19:03:48 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
|
|
|
|
mask))
|
|
|
|
conf->dot11MeshHWMPnetDiameterTraversalTime =
|
|
|
|
nconf->dot11MeshHWMPnetDiameterTraversalTime;
|
2009-11-09 23:46:57 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOTMODE, mask)) {
|
|
|
|
conf->dot11MeshHWMPRootMode = nconf->dot11MeshHWMPRootMode;
|
|
|
|
ieee80211_mesh_root_setup(ifmsh);
|
|
|
|
}
|
2011-08-09 23:45:11 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_GATE_ANNOUNCEMENTS, mask)) {
|
2011-08-25 17:36:14 +00:00
|
|
|
/* our current gate announcement implementation rides on root
|
|
|
|
* announcements, so require this ifmsh to also be a root node
|
|
|
|
* */
|
|
|
|
if (nconf->dot11MeshGateAnnouncementProtocol &&
|
2012-06-13 18:06:09 +00:00
|
|
|
!(conf->dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)) {
|
|
|
|
conf->dot11MeshHWMPRootMode = IEEE80211_PROACTIVE_RANN;
|
2011-08-25 17:36:14 +00:00
|
|
|
ieee80211_mesh_root_setup(ifmsh);
|
|
|
|
}
|
2011-08-09 23:45:11 +00:00
|
|
|
conf->dot11MeshGateAnnouncementProtocol =
|
|
|
|
nconf->dot11MeshGateAnnouncementProtocol;
|
|
|
|
}
|
2012-06-11 03:59:36 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask))
|
2011-08-09 23:45:10 +00:00
|
|
|
conf->dot11MeshHWMPRannInterval =
|
|
|
|
nconf->dot11MeshHWMPRannInterval;
|
2012-01-20 17:02:16 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_FORWARDING, mask))
|
|
|
|
conf->dot11MeshForwarding = nconf->dot11MeshForwarding;
|
2012-02-29 01:04:08 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_RSSI_THRESHOLD, mask)) {
|
|
|
|
/* our RSSI threshold implementation is supported only for
|
|
|
|
* devices that report signal in dBm.
|
|
|
|
*/
|
2015-06-02 19:39:54 +00:00
|
|
|
if (!ieee80211_hw_check(&sdata->local->hw, SIGNAL_DBM))
|
2012-02-29 01:04:08 +00:00
|
|
|
return -ENOTSUPP;
|
|
|
|
conf->rssi_threshold = nconf->rssi_threshold;
|
|
|
|
}
|
2012-04-30 21:20:32 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HT_OPMODE, mask)) {
|
|
|
|
conf->ht_opmode = nconf->ht_opmode;
|
|
|
|
sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode;
|
|
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
|
|
|
|
}
|
2012-06-13 18:06:06 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, mask))
|
|
|
|
conf->dot11MeshHWMPactivePathToRootTimeout =
|
|
|
|
nconf->dot11MeshHWMPactivePathToRootTimeout;
|
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOT_INTERVAL, mask))
|
|
|
|
conf->dot11MeshHWMProotInterval =
|
|
|
|
nconf->dot11MeshHWMProotInterval;
|
2012-06-13 18:06:10 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask))
|
|
|
|
conf->dot11MeshHWMPconfirmationInterval =
|
|
|
|
nconf->dot11MeshHWMPconfirmationInterval;
|
2013-01-30 17:14:08 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_POWER_MODE, mask)) {
|
|
|
|
conf->power_mode = nconf->power_mode;
|
|
|
|
ieee80211_mps_local_status_update(sdata);
|
|
|
|
}
|
2013-02-14 19:20:13 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask))
|
2013-01-30 17:14:08 +00:00
|
|
|
conf->dot11MeshAwakeWindowDuration =
|
|
|
|
nconf->dot11MeshAwakeWindowDuration;
|
2013-06-03 16:53:40 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_PLINK_TIMEOUT, mask))
|
|
|
|
conf->plink_timeout = nconf->plink_timeout;
|
2018-10-25 21:36:34 +00:00
|
|
|
if (_chg_mesh_attr(NL80211_MESHCONF_CONNECTED_TO_GATE, mask))
|
|
|
|
conf->dot11MeshConnectedToMeshGate =
|
|
|
|
nconf->dot11MeshConnectedToMeshGate;
|
2013-02-14 19:20:13 +00:00
|
|
|
ieee80211_mbss_info_change_notify(sdata, BSS_CHANGED_BEACON);
|
2008-10-21 19:03:48 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2010-12-03 08:20:44 +00:00
|
|
|
static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
const struct mesh_config *conf,
|
|
|
|
const struct mesh_setup *setup)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
|
2010-12-17 01:37:49 +00:00
|
|
|
int err;
|
2010-12-03 08:20:44 +00:00
|
|
|
|
2010-12-17 01:37:49 +00:00
|
|
|
memcpy(&ifmsh->mshcfg, conf, sizeof(struct mesh_config));
|
|
|
|
err = copy_mesh_setup(ifmsh, setup);
|
|
|
|
if (err)
|
|
|
|
return err;
|
2012-05-16 21:50:20 +00:00
|
|
|
|
2018-03-26 17:52:51 +00:00
|
|
|
sdata->control_port_over_nl80211 = setup->control_port_over_nl80211;
|
|
|
|
|
2012-09-11 12:34:12 +00:00
|
|
|
/* can mesh use other SMPS modes? */
|
|
|
|
sdata->smps_mode = IEEE80211_SMPS_OFF;
|
|
|
|
sdata->needed_rx_chains = sdata->local->rx_chains;
|
|
|
|
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_lock(&sdata->local->mtx);
|
2012-11-09 10:39:59 +00:00
|
|
|
err = ieee80211_vif_use_channel(sdata, &setup->chandef,
|
2012-07-26 15:24:39 +00:00
|
|
|
IEEE80211_CHANCTX_SHARED);
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_unlock(&sdata->local->mtx);
|
2012-05-16 21:50:20 +00:00
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
2013-02-14 19:20:13 +00:00
|
|
|
return ieee80211_start_mesh(sdata);
|
2010-12-03 08:20:44 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
ieee80211_stop_mesh(sdata);
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_lock(&sdata->local->mtx);
|
2012-07-26 15:24:39 +00:00
|
|
|
ieee80211_vif_release_channel(sdata);
|
2020-07-04 13:50:07 +00:00
|
|
|
kfree(sdata->u.mesh.ie);
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_unlock(&sdata->local->mtx);
|
2010-12-03 08:20:44 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2008-02-23 14:17:17 +00:00
|
|
|
#endif
|
|
|
|
|
2008-08-07 17:07:01 +00:00
|
|
|
static int ieee80211_change_bss(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
struct bss_parameters *params)
|
|
|
|
{
|
2012-07-26 15:24:39 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2017-04-27 07:15:38 +00:00
|
|
|
struct ieee80211_supported_band *sband;
|
2008-08-07 17:07:01 +00:00
|
|
|
u32 changed = 0;
|
|
|
|
|
2013-11-21 17:19:50 +00:00
|
|
|
if (!sdata_dereference(sdata->u.ap.beacon, sdata))
|
2012-07-26 15:24:39 +00:00
|
|
|
return -ENOENT;
|
|
|
|
|
2017-04-27 07:15:38 +00:00
|
|
|
sband = ieee80211_get_sband(sdata);
|
|
|
|
if (!sband)
|
|
|
|
return -EINVAL;
|
2008-08-07 17:07:01 +00:00
|
|
|
|
|
|
|
if (params->use_cts_prot >= 0) {
|
2008-10-10 23:51:51 +00:00
|
|
|
sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot;
|
2008-08-07 17:07:01 +00:00
|
|
|
changed |= BSS_CHANGED_ERP_CTS_PROT;
|
|
|
|
}
|
|
|
|
if (params->use_short_preamble >= 0) {
|
2008-10-10 23:51:51 +00:00
|
|
|
sdata->vif.bss_conf.use_short_preamble =
|
2008-08-07 17:07:01 +00:00
|
|
|
params->use_short_preamble;
|
|
|
|
changed |= BSS_CHANGED_ERP_PREAMBLE;
|
|
|
|
}
|
2010-01-15 02:00:48 +00:00
|
|
|
|
|
|
|
if (!sdata->vif.bss_conf.use_short_slot &&
|
2020-05-28 19:34:46 +00:00
|
|
|
(sband->band == NL80211_BAND_5GHZ ||
|
|
|
|
sband->band == NL80211_BAND_6GHZ)) {
|
2010-01-15 02:00:48 +00:00
|
|
|
sdata->vif.bss_conf.use_short_slot = true;
|
|
|
|
changed |= BSS_CHANGED_ERP_SLOT;
|
|
|
|
}
|
|
|
|
|
2008-08-07 17:07:01 +00:00
|
|
|
if (params->use_short_slot_time >= 0) {
|
2008-10-10 23:51:51 +00:00
|
|
|
sdata->vif.bss_conf.use_short_slot =
|
2008-08-07 17:07:01 +00:00
|
|
|
params->use_short_slot_time;
|
|
|
|
changed |= BSS_CHANGED_ERP_SLOT;
|
|
|
|
}
|
|
|
|
|
2008-10-30 14:59:22 +00:00
|
|
|
if (params->basic_rates) {
|
2013-07-08 14:55:53 +00:00
|
|
|
ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef,
|
2017-04-27 07:15:38 +00:00
|
|
|
wiphy->bands[sband->band],
|
2013-07-08 14:55:53 +00:00
|
|
|
params->basic_rates,
|
|
|
|
params->basic_rates_len,
|
|
|
|
&sdata->vif.bss_conf.basic_rates);
|
2008-10-30 14:59:22 +00:00
|
|
|
changed |= BSS_CHANGED_BASIC_RATES;
|
mac80211: reject/clear user rate mask if not usable
If the user rate mask results in no (basic) rates being usable,
clear it. Also, if we're already operating when it's set, reject
it instead.
Technically, selecting basic rates as the criterion is a bit too
restrictive, but calculating the usable rates over all stations
(e.g. in AP mode) is harder, and all stations must support the
basic rates. Similarly, in client mode, the basic rates will be
used anyway for control frames.
This fixes the "no supported rates (...) in rate_mask ..." warning
that occurs on TX when you've selected a rate mask that's not
compatible with the connection (e.g. an AP that enables only the
rates 36, 48, 54 and you've selected only 6, 9, 12.)
Reported-by: Kirtika Ruchandani <kirtika@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-08 10:12:10 +00:00
|
|
|
ieee80211_check_rate_mask(sdata);
|
2008-10-30 14:59:22 +00:00
|
|
|
}
|
|
|
|
|
2010-04-26 23:23:36 +00:00
|
|
|
if (params->ap_isolate >= 0) {
|
|
|
|
if (params->ap_isolate)
|
|
|
|
sdata->flags |= IEEE80211_SDATA_DONT_BRIDGE_PACKETS;
|
|
|
|
else
|
|
|
|
sdata->flags &= ~IEEE80211_SDATA_DONT_BRIDGE_PACKETS;
|
2016-03-31 17:02:10 +00:00
|
|
|
ieee80211_check_fast_rx_iface(sdata);
|
2010-04-26 23:23:36 +00:00
|
|
|
}
|
|
|
|
|
2010-11-19 11:40:26 +00:00
|
|
|
if (params->ht_opmode >= 0) {
|
|
|
|
sdata->vif.bss_conf.ht_operation_mode =
|
|
|
|
(u16) params->ht_opmode;
|
|
|
|
changed |= BSS_CHANGED_HT;
|
|
|
|
}
|
|
|
|
|
2012-11-14 14:21:17 +00:00
|
|
|
if (params->p2p_ctwindow >= 0) {
|
2013-03-21 14:47:56 +00:00
|
|
|
sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow &=
|
|
|
|
~IEEE80211_P2P_OPPPS_CTWINDOW_MASK;
|
|
|
|
sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |=
|
|
|
|
params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK;
|
2012-11-14 14:21:17 +00:00
|
|
|
changed |= BSS_CHANGED_P2P_PS;
|
|
|
|
}
|
|
|
|
|
2013-03-21 14:47:56 +00:00
|
|
|
if (params->p2p_opp_ps > 0) {
|
|
|
|
sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |=
|
|
|
|
IEEE80211_P2P_OPPPS_ENABLE_BIT;
|
|
|
|
changed |= BSS_CHANGED_P2P_PS;
|
|
|
|
} else if (params->p2p_opp_ps == 0) {
|
|
|
|
sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow &=
|
|
|
|
~IEEE80211_P2P_OPPPS_ENABLE_BIT;
|
2012-11-14 14:21:17 +00:00
|
|
|
changed |= BSS_CHANGED_P2P_PS;
|
|
|
|
}
|
|
|
|
|
2008-08-07 17:07:01 +00:00
|
|
|
ieee80211_bss_info_change_notify(sdata, changed);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-10-30 14:59:24 +00:00
|
|
|
static int ieee80211_set_txq_params(struct wiphy *wiphy,
|
2011-09-25 17:06:53 +00:00
|
|
|
struct net_device *dev,
|
2008-10-30 14:59:24 +00:00
|
|
|
struct ieee80211_txq_params *params)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2011-09-25 17:06:54 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
2008-10-30 14:59:24 +00:00
|
|
|
struct ieee80211_tx_queue_params p;
|
|
|
|
|
|
|
|
if (!local->ops->conf_tx)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
2012-03-28 09:04:25 +00:00
|
|
|
if (local->hw.queues < IEEE80211_NUM_ACS)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
2008-10-30 14:59:24 +00:00
|
|
|
memset(&p, 0, sizeof(p));
|
|
|
|
p.aifs = params->aifs;
|
|
|
|
p.cw_max = params->cwmax;
|
|
|
|
p.cw_min = params->cwmin;
|
|
|
|
p.txop = params->txop;
|
2010-01-12 08:42:31 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Setting tx queue params disables u-apsd because it's only
|
|
|
|
* called in master mode.
|
|
|
|
*/
|
|
|
|
p.uapsd = false;
|
|
|
|
|
2018-03-28 10:24:10 +00:00
|
|
|
ieee80211_regulatory_limit_wmm_params(sdata, &p, params->ac);
|
|
|
|
|
2012-03-28 09:04:24 +00:00
|
|
|
sdata->tx_conf[params->ac] = p;
|
|
|
|
if (drv_conf_tx(local, sdata, params->ac, &p)) {
|
2010-08-20 23:25:38 +00:00
|
|
|
wiphy_debug(local->hw.wiphy,
|
2012-03-28 09:04:24 +00:00
|
|
|
"failed to set TX queue parameters for AC %d\n",
|
|
|
|
params->ac);
|
2008-10-30 14:59:24 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2012-07-06 15:37:43 +00:00
|
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
|
|
|
|
|
2008-10-30 14:59:24 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-01-19 16:20:53 +00:00
|
|
|
#ifdef CONFIG_PM
|
2011-05-04 13:37:28 +00:00
|
|
|
static int ieee80211_suspend(struct wiphy *wiphy,
|
|
|
|
struct cfg80211_wowlan *wowlan)
|
2009-01-19 16:20:53 +00:00
|
|
|
{
|
2011-05-04 13:37:29 +00:00
|
|
|
return __ieee80211_suspend(wiphy_priv(wiphy), wowlan);
|
2009-01-19 16:20:53 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_resume(struct wiphy *wiphy)
|
|
|
|
{
|
|
|
|
return __ieee80211_resume(wiphy_priv(wiphy));
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
#define ieee80211_suspend NULL
|
|
|
|
#define ieee80211_resume NULL
|
|
|
|
#endif
|
|
|
|
|
2009-02-10 20:25:55 +00:00
|
|
|
static int ieee80211_scan(struct wiphy *wiphy,
|
|
|
|
struct cfg80211_scan_request *req)
|
|
|
|
{
|
2012-06-18 17:17:03 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
|
|
|
|
sdata = IEEE80211_WDEV_TO_SUB_IF(req->wdev);
|
2009-02-10 20:25:55 +00:00
|
|
|
|
2010-09-16 12:58:23 +00:00
|
|
|
switch (ieee80211_vif_type_p2p(&sdata->vif)) {
|
|
|
|
case NL80211_IFTYPE_STATION:
|
|
|
|
case NL80211_IFTYPE_ADHOC:
|
|
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
2012-06-18 18:07:15 +00:00
|
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
2010-09-16 12:58:23 +00:00
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_P2P_GO:
|
|
|
|
if (sdata->local->ops->hw_scan)
|
|
|
|
break;
|
2011-02-01 14:35:36 +00:00
|
|
|
/*
|
|
|
|
* FIXME: implement NoA while scanning in software,
|
|
|
|
* for now fall through to allow scanning only when
|
|
|
|
* beaconing hasn't been configured yet
|
|
|
|
*/
|
2017-10-17 23:14:50 +00:00
|
|
|
/* fall through */
|
2010-09-16 12:58:23 +00:00
|
|
|
case NL80211_IFTYPE_AP:
|
2012-10-16 06:39:22 +00:00
|
|
|
/*
|
|
|
|
* If the scan has been forced (and the driver supports
|
|
|
|
* forcing), don't care about being beaconing already.
|
|
|
|
* This will create problems to the attached stations (e.g. all
|
|
|
|
* the frames sent while scanning on other channel will be
|
|
|
|
* lost)
|
|
|
|
*/
|
|
|
|
if (sdata->u.ap.beacon &&
|
|
|
|
(!(wiphy->features & NL80211_FEATURE_AP_SCAN) ||
|
|
|
|
!(req->flags & NL80211_SCAN_FLAG_AP)))
|
2010-09-16 12:58:23 +00:00
|
|
|
return -EOPNOTSUPP;
|
|
|
|
break;
|
2016-09-20 14:31:13 +00:00
|
|
|
case NL80211_IFTYPE_NAN:
|
2010-09-16 12:58:23 +00:00
|
|
|
default:
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
2009-02-10 20:25:55 +00:00
|
|
|
|
|
|
|
return ieee80211_request_scan(sdata, req);
|
|
|
|
}
|
|
|
|
|
2015-10-30 13:44:50 +00:00
|
|
|
static void ieee80211_abort_scan(struct wiphy *wiphy, struct wireless_dev *wdev)
|
|
|
|
{
|
|
|
|
ieee80211_scan_cancel(wiphy_priv(wiphy));
|
|
|
|
}
|
|
|
|
|
2011-05-11 14:09:36 +00:00
|
|
|
static int
|
|
|
|
ieee80211_sched_scan_start(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
struct cfg80211_sched_scan_request *req)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
if (!sdata->local->ops->sched_scan_start)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
return ieee80211_request_sched_scan_start(sdata, req);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2017-04-21 12:05:02 +00:00
|
|
|
ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
u64 reqid)
|
2011-05-11 14:09:36 +00:00
|
|
|
{
|
2015-10-25 08:59:33 +00:00
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2011-05-11 14:09:36 +00:00
|
|
|
|
2015-10-25 08:59:33 +00:00
|
|
|
if (!local->ops->sched_scan_stop)
|
2011-05-11 14:09:36 +00:00
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
2015-10-25 08:59:33 +00:00
|
|
|
return ieee80211_request_sched_scan_stop(local);
|
2011-05-11 14:09:36 +00:00
|
|
|
}
|
|
|
|
|
2009-03-19 11:39:22 +00:00
|
|
|
static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
struct cfg80211_auth_request *req)
|
|
|
|
{
|
2009-07-07 01:45:17 +00:00
|
|
|
return ieee80211_mgd_auth(IEEE80211_DEV_TO_SUB_IF(dev), req);
|
2009-03-19 11:39:22 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
struct cfg80211_assoc_request *req)
|
|
|
|
{
|
2009-07-07 01:45:17 +00:00
|
|
|
return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req);
|
2009-03-19 11:39:22 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev,
|
2012-02-24 12:50:51 +00:00
|
|
|
struct cfg80211_deauth_request *req)
|
2009-03-19 11:39:22 +00:00
|
|
|
{
|
2012-02-24 12:50:51 +00:00
|
|
|
return ieee80211_mgd_deauth(IEEE80211_DEV_TO_SUB_IF(dev), req);
|
2009-03-19 11:39:22 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev,
|
2012-02-24 12:50:51 +00:00
|
|
|
struct cfg80211_disassoc_request *req)
|
2009-03-19 11:39:22 +00:00
|
|
|
{
|
2012-02-24 12:50:51 +00:00
|
|
|
return ieee80211_mgd_disassoc(IEEE80211_DEV_TO_SUB_IF(dev), req);
|
2009-03-19 11:39:22 +00:00
|
|
|
}
|
|
|
|
|
2009-04-19 19:25:43 +00:00
|
|
|
static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
struct cfg80211_ibss_params *params)
|
|
|
|
{
|
2012-07-26 15:24:39 +00:00
|
|
|
return ieee80211_ibss_join(IEEE80211_DEV_TO_SUB_IF(dev), params);
|
2009-04-19 19:25:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
|
|
|
|
{
|
2012-07-26 15:24:39 +00:00
|
|
|
return ieee80211_ibss_leave(IEEE80211_DEV_TO_SUB_IF(dev));
|
2009-04-19 19:25:43 +00:00
|
|
|
}
|
|
|
|
|
2014-11-03 09:33:19 +00:00
|
|
|
static int ieee80211_join_ocb(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
struct ocb_setup *setup)
|
|
|
|
{
|
|
|
|
return ieee80211_ocb_join(IEEE80211_DEV_TO_SUB_IF(dev), setup);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_leave_ocb(struct wiphy *wiphy, struct net_device *dev)
|
|
|
|
{
|
|
|
|
return ieee80211_ocb_leave(IEEE80211_DEV_TO_SUB_IF(dev));
|
|
|
|
}
|
|
|
|
|
2012-11-02 12:27:49 +00:00
|
|
|
static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev,
|
2016-04-12 13:56:15 +00:00
|
|
|
int rate[NUM_NL80211_BANDS])
|
2012-11-02 12:27:49 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
2013-02-06 16:23:45 +00:00
|
|
|
memcpy(sdata->vif.bss_conf.mcast_rate, rate,
|
2016-04-12 13:56:15 +00:00
|
|
|
sizeof(int) * NUM_NL80211_BANDS);
|
2012-11-02 12:27:49 +00:00
|
|
|
|
2018-03-22 19:18:03 +00:00
|
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_MCAST_RATE);
|
|
|
|
|
2012-11-02 12:27:49 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-04-20 16:39:05 +00:00
|
|
|
static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2009-04-23 16:52:52 +00:00
|
|
|
int err;
|
2009-04-20 16:39:05 +00:00
|
|
|
|
2010-11-08 09:51:06 +00:00
|
|
|
if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
|
2015-03-21 14:25:43 +00:00
|
|
|
ieee80211_check_fast_xmit_all(local);
|
|
|
|
|
2010-11-08 09:51:06 +00:00
|
|
|
err = drv_set_frag_threshold(local, wiphy->frag_threshold);
|
|
|
|
|
2015-03-21 14:25:43 +00:00
|
|
|
if (err) {
|
|
|
|
ieee80211_check_fast_xmit_all(local);
|
2010-11-08 09:51:06 +00:00
|
|
|
return err;
|
2015-03-21 14:25:43 +00:00
|
|
|
}
|
2010-11-08 09:51:06 +00:00
|
|
|
}
|
|
|
|
|
2014-09-04 21:57:41 +00:00
|
|
|
if ((changed & WIPHY_PARAM_COVERAGE_CLASS) ||
|
|
|
|
(changed & WIPHY_PARAM_DYN_ACK)) {
|
|
|
|
s16 coverage_class;
|
|
|
|
|
|
|
|
coverage_class = changed & WIPHY_PARAM_COVERAGE_CLASS ?
|
|
|
|
wiphy->coverage_class : -1;
|
|
|
|
err = drv_set_coverage_class(local, coverage_class);
|
2009-12-21 21:50:48 +00:00
|
|
|
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2009-04-20 16:39:05 +00:00
|
|
|
if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
|
2009-04-23 16:52:52 +00:00
|
|
|
err = drv_set_rts_threshold(local, wiphy->rts_threshold);
|
2009-04-20 16:39:05 +00:00
|
|
|
|
2009-04-23 16:52:52 +00:00
|
|
|
if (err)
|
|
|
|
return err;
|
2009-04-20 16:39:05 +00:00
|
|
|
}
|
|
|
|
|
2012-11-09 17:38:32 +00:00
|
|
|
if (changed & WIPHY_PARAM_RETRY_SHORT) {
|
|
|
|
if (wiphy->retry_short > IEEE80211_MAX_TX_RETRY)
|
|
|
|
return -EINVAL;
|
2009-04-20 16:39:05 +00:00
|
|
|
local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
|
2012-11-09 17:38:32 +00:00
|
|
|
}
|
|
|
|
if (changed & WIPHY_PARAM_RETRY_LONG) {
|
|
|
|
if (wiphy->retry_long > IEEE80211_MAX_TX_RETRY)
|
|
|
|
return -EINVAL;
|
2009-04-20 16:39:05 +00:00
|
|
|
local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
|
2012-11-09 17:38:32 +00:00
|
|
|
}
|
2009-04-20 16:39:05 +00:00
|
|
|
if (changed &
|
|
|
|
(WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG))
|
|
|
|
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
|
|
|
|
|
2018-05-08 11:03:50 +00:00
|
|
|
if (changed & (WIPHY_PARAM_TXQ_LIMIT |
|
|
|
|
WIPHY_PARAM_TXQ_MEMORY_LIMIT |
|
|
|
|
WIPHY_PARAM_TXQ_QUANTUM))
|
|
|
|
ieee80211_txq_set_params(local);
|
|
|
|
|
2009-04-20 16:39:05 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-06-02 11:01:39 +00:00
|
|
|
static int ieee80211_set_tx_power(struct wiphy *wiphy,
|
2012-10-24 08:17:18 +00:00
|
|
|
struct wireless_dev *wdev,
|
2010-06-23 09:12:37 +00:00
|
|
|
enum nl80211_tx_power_setting type, int mbm)
|
2009-06-02 11:01:39 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2012-10-24 08:59:25 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata;
|
2015-01-14 11:55:08 +00:00
|
|
|
enum nl80211_tx_power_setting txp_type = type;
|
|
|
|
bool update_txp_type = false;
|
2017-12-13 17:29:46 +00:00
|
|
|
bool has_monitor = false;
|
2009-06-02 11:01:39 +00:00
|
|
|
|
2012-10-24 08:59:25 +00:00
|
|
|
if (wdev) {
|
|
|
|
sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
|
|
|
2017-12-13 17:29:46 +00:00
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
|
|
|
|
sdata = rtnl_dereference(local->monitor_sdata);
|
|
|
|
if (!sdata)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
2012-10-24 08:59:25 +00:00
|
|
|
switch (type) {
|
|
|
|
case NL80211_TX_POWER_AUTOMATIC:
|
|
|
|
sdata->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
|
2015-01-14 11:55:08 +00:00
|
|
|
txp_type = NL80211_TX_POWER_LIMITED;
|
2012-10-24 08:59:25 +00:00
|
|
|
break;
|
|
|
|
case NL80211_TX_POWER_LIMITED:
|
|
|
|
case NL80211_TX_POWER_FIXED:
|
|
|
|
if (mbm < 0 || (mbm % 100))
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
sdata->user_power_level = MBM_TO_DBM(mbm);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2015-01-14 11:55:08 +00:00
|
|
|
if (txp_type != sdata->vif.bss_conf.txpower_type) {
|
|
|
|
update_txp_type = true;
|
|
|
|
sdata->vif.bss_conf.txpower_type = txp_type;
|
|
|
|
}
|
|
|
|
|
|
|
|
ieee80211_recalc_txpower(sdata, update_txp_type);
|
2012-10-24 08:59:25 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2012-07-26 15:24:39 +00:00
|
|
|
|
2009-06-02 11:01:39 +00:00
|
|
|
switch (type) {
|
2010-06-23 09:12:37 +00:00
|
|
|
case NL80211_TX_POWER_AUTOMATIC:
|
2012-10-24 08:59:25 +00:00
|
|
|
local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
|
2015-01-14 11:55:08 +00:00
|
|
|
txp_type = NL80211_TX_POWER_LIMITED;
|
2009-06-02 11:01:39 +00:00
|
|
|
break;
|
2010-06-23 09:12:37 +00:00
|
|
|
case NL80211_TX_POWER_LIMITED:
|
|
|
|
case NL80211_TX_POWER_FIXED:
|
|
|
|
if (mbm < 0 || (mbm % 100))
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
local->user_power_level = MBM_TO_DBM(mbm);
|
2009-06-02 11:01:39 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2012-10-24 08:59:25 +00:00
|
|
|
mutex_lock(&local->iflist_mtx);
|
2015-01-14 11:55:08 +00:00
|
|
|
list_for_each_entry(sdata, &local->interfaces, list) {
|
2017-12-13 17:29:46 +00:00
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
|
|
|
|
has_monitor = true;
|
|
|
|
continue;
|
|
|
|
}
|
2012-10-24 08:59:25 +00:00
|
|
|
sdata->user_power_level = local->user_power_level;
|
2015-01-14 11:55:08 +00:00
|
|
|
if (txp_type != sdata->vif.bss_conf.txpower_type)
|
|
|
|
update_txp_type = true;
|
|
|
|
sdata->vif.bss_conf.txpower_type = txp_type;
|
|
|
|
}
|
2017-12-13 17:29:46 +00:00
|
|
|
list_for_each_entry(sdata, &local->interfaces, list) {
|
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
|
|
|
|
continue;
|
2015-01-14 11:55:08 +00:00
|
|
|
ieee80211_recalc_txpower(sdata, update_txp_type);
|
2017-12-13 17:29:46 +00:00
|
|
|
}
|
2012-10-24 08:59:25 +00:00
|
|
|
mutex_unlock(&local->iflist_mtx);
|
2009-06-02 11:01:39 +00:00
|
|
|
|
2017-12-13 17:29:46 +00:00
|
|
|
if (has_monitor) {
|
|
|
|
sdata = rtnl_dereference(local->monitor_sdata);
|
|
|
|
if (sdata) {
|
|
|
|
sdata->user_power_level = local->user_power_level;
|
|
|
|
if (txp_type != sdata->vif.bss_conf.txpower_type)
|
|
|
|
update_txp_type = true;
|
|
|
|
sdata->vif.bss_conf.txpower_type = txp_type;
|
|
|
|
|
|
|
|
ieee80211_recalc_txpower(sdata, update_txp_type);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-06-02 11:01:39 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-10-24 08:17:18 +00:00
|
|
|
static int ieee80211_get_tx_power(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev,
|
|
|
|
int *dbm)
|
2009-06-02 11:01:39 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2012-10-24 08:59:25 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
2009-06-02 11:01:39 +00:00
|
|
|
|
2014-10-25 22:32:53 +00:00
|
|
|
if (local->ops->get_txpower)
|
|
|
|
return drv_get_txpower(local, sdata, dbm);
|
|
|
|
|
2012-10-24 08:59:25 +00:00
|
|
|
if (!local->use_chanctx)
|
|
|
|
*dbm = local->hw.conf.power_level;
|
|
|
|
else
|
|
|
|
*dbm = sdata->vif.bss_conf.txpower;
|
2009-06-02 11:01:39 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-07-01 19:26:58 +00:00
|
|
|
static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
|
2010-10-07 11:11:09 +00:00
|
|
|
const u8 *addr)
|
2009-07-01 19:26:58 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
memcpy(&sdata->u.wds.remote_addr, addr, ETH_ALEN);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-06-02 11:01:41 +00:00
|
|
|
static void ieee80211_rfkill_poll(struct wiphy *wiphy)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
|
|
|
|
|
|
|
drv_rfkill_poll(local);
|
|
|
|
}
|
|
|
|
|
2009-07-01 19:26:51 +00:00
|
|
|
#ifdef CONFIG_NL80211_TESTMODE
|
2013-07-31 15:04:15 +00:00
|
|
|
static int ieee80211_testmode_cmd(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev,
|
|
|
|
void *data, int len)
|
2009-07-01 19:26:51 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2013-07-31 15:06:22 +00:00
|
|
|
struct ieee80211_vif *vif = NULL;
|
2009-07-01 19:26:51 +00:00
|
|
|
|
|
|
|
if (!local->ops->testmode_cmd)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
2013-07-31 15:06:22 +00:00
|
|
|
if (wdev) {
|
|
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
|
|
|
|
sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
|
|
if (sdata->flags & IEEE80211_SDATA_IN_DRIVER)
|
|
|
|
vif = &sdata->vif;
|
|
|
|
}
|
|
|
|
|
|
|
|
return local->ops->testmode_cmd(&local->hw, vif, data, len);
|
2009-07-01 19:26:51 +00:00
|
|
|
}
|
2011-05-20 16:05:54 +00:00
|
|
|
|
|
|
|
static int ieee80211_testmode_dump(struct wiphy *wiphy,
|
|
|
|
struct sk_buff *skb,
|
|
|
|
struct netlink_callback *cb,
|
|
|
|
void *data, int len)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
|
|
|
|
|
|
|
if (!local->ops->testmode_dump)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
return local->ops->testmode_dump(&local->hw, skb, cb, data, len);
|
|
|
|
}
|
2009-07-01 19:26:51 +00:00
|
|
|
#endif
|
|
|
|
|
2013-10-01 13:45:43 +00:00
|
|
|
int __ieee80211_request_smps_mgd(struct ieee80211_sub_if_data *sdata,
|
|
|
|
enum ieee80211_smps_mode smps_mode)
|
2009-12-01 12:37:02 +00:00
|
|
|
{
|
|
|
|
const u8 *ap;
|
|
|
|
enum ieee80211_smps_mode old_req;
|
|
|
|
int err;
|
2015-06-14 13:53:46 +00:00
|
|
|
struct sta_info *sta;
|
|
|
|
bool tdls_peer_found = false;
|
2009-12-01 12:37:02 +00:00
|
|
|
|
2013-05-10 10:32:47 +00:00
|
|
|
lockdep_assert_held(&sdata->wdev.mtx);
|
2011-04-19 18:44:04 +00:00
|
|
|
|
2013-10-01 13:45:43 +00:00
|
|
|
if (WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_STATION))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2009-12-01 12:37:02 +00:00
|
|
|
old_req = sdata->u.mgd.req_smps;
|
|
|
|
sdata->u.mgd.req_smps = smps_mode;
|
|
|
|
|
|
|
|
if (old_req == smps_mode &&
|
|
|
|
smps_mode != IEEE80211_SMPS_AUTOMATIC)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If not associated, or current association is not an HT
|
2012-09-11 12:34:12 +00:00
|
|
|
* association, there's no need to do anything, just store
|
|
|
|
* the new value until we associate.
|
2009-12-01 12:37:02 +00:00
|
|
|
*/
|
|
|
|
if (!sdata->u.mgd.associated ||
|
2012-11-09 10:39:59 +00:00
|
|
|
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
|
2009-12-01 12:37:02 +00:00
|
|
|
return 0;
|
|
|
|
|
2009-12-23 12:15:39 +00:00
|
|
|
ap = sdata->u.mgd.associated->bssid;
|
2009-12-01 12:37:02 +00:00
|
|
|
|
2015-06-14 13:53:46 +00:00
|
|
|
rcu_read_lock();
|
|
|
|
list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) {
|
|
|
|
if (!sta->sta.tdls || sta->sdata != sdata || !sta->uploaded ||
|
|
|
|
!test_sta_flag(sta, WLAN_STA_AUTHORIZED))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
tdls_peer_found = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
2009-12-01 12:37:02 +00:00
|
|
|
if (smps_mode == IEEE80211_SMPS_AUTOMATIC) {
|
2015-06-14 13:53:46 +00:00
|
|
|
if (tdls_peer_found || !sdata->u.mgd.powersave)
|
2009-12-01 12:37:02 +00:00
|
|
|
smps_mode = IEEE80211_SMPS_OFF;
|
2015-06-14 13:53:46 +00:00
|
|
|
else
|
|
|
|
smps_mode = IEEE80211_SMPS_DYNAMIC;
|
2009-12-01 12:37:02 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* send SM PS frame to AP */
|
|
|
|
err = ieee80211_send_smps_action(sdata, smps_mode,
|
|
|
|
ap, ap);
|
|
|
|
if (err)
|
|
|
|
sdata->u.mgd.req_smps = old_req;
|
2015-06-14 13:53:46 +00:00
|
|
|
else if (smps_mode != IEEE80211_SMPS_OFF && tdls_peer_found)
|
|
|
|
ieee80211_teardown_tdls_peers(sdata);
|
2009-12-01 12:37:02 +00:00
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2009-07-01 19:26:57 +00:00
|
|
|
static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
bool enabled, int timeout)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
|
|
|
|
|
2013-10-29 22:11:59 +00:00
|
|
|
if (sdata->vif.type != NL80211_IFTYPE_STATION)
|
2010-01-15 11:21:37 +00:00
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
2015-06-02 19:39:54 +00:00
|
|
|
if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS))
|
2009-07-01 19:26:57 +00:00
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
if (enabled == sdata->u.mgd.powersave &&
|
2010-06-09 06:51:52 +00:00
|
|
|
timeout == local->dynamic_ps_forced_timeout)
|
2009-07-01 19:26:57 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
sdata->u.mgd.powersave = enabled;
|
2010-06-09 06:51:52 +00:00
|
|
|
local->dynamic_ps_forced_timeout = timeout;
|
2009-07-01 19:26:57 +00:00
|
|
|
|
2009-12-01 12:37:02 +00:00
|
|
|
/* no change, but if automatic follow powersave */
|
2013-06-03 11:51:59 +00:00
|
|
|
sdata_lock(sdata);
|
2013-10-01 13:45:43 +00:00
|
|
|
__ieee80211_request_smps_mgd(sdata, sdata->u.mgd.req_smps);
|
2013-06-03 11:51:59 +00:00
|
|
|
sdata_unlock(sdata);
|
2009-12-01 12:37:02 +00:00
|
|
|
|
2015-06-02 19:39:54 +00:00
|
|
|
if (ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS))
|
2009-07-01 19:26:57 +00:00
|
|
|
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
|
|
|
|
|
2015-10-14 16:02:43 +00:00
|
|
|
ieee80211_recalc_ps(local);
|
2012-07-27 09:33:22 +00:00
|
|
|
ieee80211_recalc_ps_vif(sdata);
|
2018-02-23 09:06:05 +00:00
|
|
|
ieee80211_check_fast_rx_iface(sdata);
|
2009-07-01 19:26:57 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2010-03-23 07:02:34 +00:00
|
|
|
static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
s32 rssi_thold, u32 rssi_hyst)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_vif *vif = &sdata->vif;
|
|
|
|
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
|
|
|
|
|
|
|
|
if (rssi_thold == bss_conf->cqm_rssi_thold &&
|
|
|
|
rssi_hyst == bss_conf->cqm_rssi_hyst)
|
|
|
|
return 0;
|
|
|
|
|
2015-08-28 08:44:20 +00:00
|
|
|
if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER &&
|
|
|
|
!(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI))
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
2010-03-23 07:02:34 +00:00
|
|
|
bss_conf->cqm_rssi_thold = rssi_thold;
|
|
|
|
bss_conf->cqm_rssi_hyst = rssi_hyst;
|
2017-02-10 03:50:22 +00:00
|
|
|
bss_conf->cqm_rssi_low = 0;
|
|
|
|
bss_conf->cqm_rssi_high = 0;
|
|
|
|
sdata->u.mgd.last_cqm_event_signal = 0;
|
|
|
|
|
|
|
|
/* tell the driver upon association, unless already associated */
|
|
|
|
if (sdata->u.mgd.associated &&
|
|
|
|
sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)
|
|
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_set_cqm_rssi_range_config(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
s32 rssi_low, s32 rssi_high)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_vif *vif = &sdata->vif;
|
|
|
|
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
|
|
|
|
|
|
|
|
if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
bss_conf->cqm_rssi_low = rssi_low;
|
|
|
|
bss_conf->cqm_rssi_high = rssi_high;
|
|
|
|
bss_conf->cqm_rssi_thold = 0;
|
|
|
|
bss_conf->cqm_rssi_hyst = 0;
|
2015-09-21 12:47:40 +00:00
|
|
|
sdata->u.mgd.last_cqm_event_signal = 0;
|
2010-03-23 07:02:34 +00:00
|
|
|
|
|
|
|
/* tell the driver upon association, unless already associated */
|
2012-01-19 08:29:58 +00:00
|
|
|
if (sdata->u.mgd.associated &&
|
|
|
|
sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)
|
2010-03-23 07:02:34 +00:00
|
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-07-01 19:26:59 +00:00
|
|
|
static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
const u8 *addr,
|
|
|
|
const struct cfg80211_bitrate_mask *mask)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
|
2011-04-27 11:26:51 +00:00
|
|
|
int i, ret;
|
2009-12-04 08:26:38 +00:00
|
|
|
|
2012-06-12 09:41:15 +00:00
|
|
|
if (!ieee80211_sdata_running(sdata))
|
|
|
|
return -ENETDOWN;
|
|
|
|
|
mac80211: reject/clear user rate mask if not usable
If the user rate mask results in no (basic) rates being usable,
clear it. Also, if we're already operating when it's set, reject
it instead.
Technically, selecting basic rates as the criterion is a bit too
restrictive, but calculating the usable rates over all stations
(e.g. in AP mode) is harder, and all stations must support the
basic rates. Similarly, in client mode, the basic rates will be
used anyway for control frames.
This fixes the "no supported rates (...) in rate_mask ..." warning
that occurs on TX when you've selected a rate mask that's not
compatible with the connection (e.g. an AP that enables only the
rates 36, 48, 54 and you've selected only 6, 9, 12.)
Reported-by: Kirtika Ruchandani <kirtika@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-08 10:12:10 +00:00
|
|
|
/*
|
|
|
|
* If active validate the setting and reject it if it doesn't leave
|
|
|
|
* at least one basic rate usable, since we really have to be able
|
|
|
|
* to send something, and if we're an AP we have to be able to do
|
|
|
|
* so at a basic rate so that all clients can receive it.
|
|
|
|
*/
|
|
|
|
if (rcu_access_pointer(sdata->vif.chanctx_conf) &&
|
|
|
|
sdata->vif.bss_conf.chandef.chan) {
|
|
|
|
u32 basic_rates = sdata->vif.bss_conf.basic_rates;
|
|
|
|
enum nl80211_band band = sdata->vif.bss_conf.chandef.chan->band;
|
|
|
|
|
|
|
|
if (!(mask->control[band].legacy & basic_rates))
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2017-10-18 07:36:51 +00:00
|
|
|
if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) {
|
|
|
|
ret = drv_set_bitrate_mask(local, sdata, mask);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2016-04-12 13:56:15 +00:00
|
|
|
for (i = 0; i < NUM_NL80211_BANDS; i++) {
|
2013-04-16 11:38:42 +00:00
|
|
|
struct ieee80211_supported_band *sband = wiphy->bands[i];
|
|
|
|
int j;
|
|
|
|
|
2010-01-06 11:09:08 +00:00
|
|
|
sdata->rc_rateidx_mask[i] = mask->control[i].legacy;
|
2013-12-05 09:02:15 +00:00
|
|
|
memcpy(sdata->rc_rateidx_mcs_mask[i], mask->control[i].ht_mcs,
|
|
|
|
sizeof(mask->control[i].ht_mcs));
|
2015-08-06 21:47:33 +00:00
|
|
|
memcpy(sdata->rc_rateidx_vht_mcs_mask[i],
|
|
|
|
mask->control[i].vht_mcs,
|
|
|
|
sizeof(mask->control[i].vht_mcs));
|
2013-04-16 11:38:42 +00:00
|
|
|
|
|
|
|
sdata->rc_has_mcs_mask[i] = false;
|
2015-08-06 21:47:33 +00:00
|
|
|
sdata->rc_has_vht_mcs_mask[i] = false;
|
2013-04-16 11:38:42 +00:00
|
|
|
if (!sband)
|
|
|
|
continue;
|
|
|
|
|
2015-08-06 21:47:33 +00:00
|
|
|
for (j = 0; j < IEEE80211_HT_MCS_MASK_LEN; j++) {
|
2015-08-21 12:07:13 +00:00
|
|
|
if (~sdata->rc_rateidx_mcs_mask[i][j]) {
|
2013-04-16 11:38:42 +00:00
|
|
|
sdata->rc_has_mcs_mask[i] = true;
|
2015-08-21 12:07:13 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2015-08-06 21:47:33 +00:00
|
|
|
|
2015-08-21 12:07:13 +00:00
|
|
|
for (j = 0; j < NL80211_VHT_NSS_MAX; j++) {
|
|
|
|
if (~sdata->rc_rateidx_vht_mcs_mask[i][j]) {
|
2015-08-06 21:47:33 +00:00
|
|
|
sdata->rc_has_vht_mcs_mask[i] = true;
|
2013-04-16 11:38:42 +00:00
|
|
|
break;
|
2015-08-21 12:07:13 +00:00
|
|
|
}
|
2015-08-06 21:47:33 +00:00
|
|
|
}
|
2012-01-28 16:25:33 +00:00
|
|
|
}
|
2009-07-01 19:26:59 +00:00
|
|
|
|
2010-01-06 11:09:08 +00:00
|
|
|
return 0;
|
2009-07-01 19:26:59 +00:00
|
|
|
}
|
|
|
|
|
2013-02-08 17:16:20 +00:00
|
|
|
static int ieee80211_start_radar_detection(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
2014-02-21 18:46:13 +00:00
|
|
|
struct cfg80211_chan_def *chandef,
|
|
|
|
u32 cac_time_ms)
|
2013-02-08 17:16:20 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
int err;
|
|
|
|
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
mutex_lock(&local->mtx);
|
|
|
|
if (!list_empty(&local->roc_list) || local->scanning) {
|
|
|
|
err = -EBUSY;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
2013-02-08 17:16:20 +00:00
|
|
|
|
|
|
|
/* whatever, but channel contexts should not complain about that one */
|
|
|
|
sdata->smps_mode = IEEE80211_SMPS_OFF;
|
|
|
|
sdata->needed_rx_chains = local->rx_chains;
|
|
|
|
|
|
|
|
err = ieee80211_vif_use_channel(sdata, chandef,
|
|
|
|
IEEE80211_CHANCTX_SHARED);
|
|
|
|
if (err)
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
goto out_unlock;
|
2013-02-08 17:16:20 +00:00
|
|
|
|
|
|
|
ieee80211_queue_delayed_work(&sdata->local->hw,
|
2014-02-21 18:46:13 +00:00
|
|
|
&sdata->dfs_cac_timer_work,
|
|
|
|
msecs_to_jiffies(cac_time_ms));
|
2013-02-08 17:16:20 +00:00
|
|
|
|
mac80211: fix iflist_mtx/mtx locking in radar detection
The scan code creates an iflist_mtx -> mtx locking dependency,
and a few other places, notably radar detection, were creating
the opposite dependency, causing lockdep to complain. As scan
and radar detection are mutually exclusive, the deadlock can't
really happen in practice, but it's still bad form.
A similar issue exists in the monitor mode code, but this is
only used by channel-context drivers right now and those have
to have hardware scan, so that also can't happen.
Still, fix these issues by making some of the channel context
code require the mtx to be held rather than acquiring it, thus
allowing the monitor/radar callers to keep the iflist_mtx->mtx
lock ordering.
While at it, also fix access to the local->scanning variable
in the radar code, and document that radar_detect_enabled is
now properly protected by the mtx.
All this would now introduce an ABBA deadlock between the DFS
work cancelling and local->mtx, so change the locking there a
bit to not need to use cancel_delayed_work_sync() but be able
to just use cancel_delayed_work(). The work is also safely
stopped/removed when the interface is stopped, so no extra
changes are needed.
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18 08:43:33 +00:00
|
|
|
out_unlock:
|
|
|
|
mutex_unlock(&local->mtx);
|
|
|
|
return err;
|
2013-02-08 17:16:20 +00:00
|
|
|
}
|
|
|
|
|
2019-12-22 14:55:31 +00:00
|
|
|
static void ieee80211_end_cac(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
|
|
|
|
mutex_lock(&local->mtx);
|
|
|
|
list_for_each_entry(sdata, &local->interfaces, list) {
|
|
|
|
/* it might be waiting for the local->mtx, but then
|
|
|
|
* by the time it gets it, sdata->wdev.cac_started
|
|
|
|
* will no longer be true
|
|
|
|
*/
|
|
|
|
cancel_delayed_work(&sdata->dfs_cac_timer_work);
|
|
|
|
|
|
|
|
if (sdata->wdev.cac_started) {
|
|
|
|
ieee80211_vif_release_channel(sdata);
|
|
|
|
sdata->wdev.cac_started = false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
mutex_unlock(&local->mtx);
|
|
|
|
}
|
|
|
|
|
2013-07-11 14:09:06 +00:00
|
|
|
static struct cfg80211_beacon_data *
|
|
|
|
cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon)
|
|
|
|
{
|
|
|
|
struct cfg80211_beacon_data *new_beacon;
|
|
|
|
u8 *pos;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
len = beacon->head_len + beacon->tail_len + beacon->beacon_ies_len +
|
|
|
|
beacon->proberesp_ies_len + beacon->assocresp_ies_len +
|
2018-10-30 08:17:45 +00:00
|
|
|
beacon->probe_resp_len + beacon->lci_len + beacon->civicloc_len;
|
2013-07-11 14:09:06 +00:00
|
|
|
|
|
|
|
new_beacon = kzalloc(sizeof(*new_beacon) + len, GFP_KERNEL);
|
|
|
|
if (!new_beacon)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
pos = (u8 *)(new_beacon + 1);
|
|
|
|
if (beacon->head_len) {
|
|
|
|
new_beacon->head_len = beacon->head_len;
|
|
|
|
new_beacon->head = pos;
|
|
|
|
memcpy(pos, beacon->head, beacon->head_len);
|
|
|
|
pos += beacon->head_len;
|
|
|
|
}
|
|
|
|
if (beacon->tail_len) {
|
|
|
|
new_beacon->tail_len = beacon->tail_len;
|
|
|
|
new_beacon->tail = pos;
|
|
|
|
memcpy(pos, beacon->tail, beacon->tail_len);
|
|
|
|
pos += beacon->tail_len;
|
|
|
|
}
|
|
|
|
if (beacon->beacon_ies_len) {
|
|
|
|
new_beacon->beacon_ies_len = beacon->beacon_ies_len;
|
|
|
|
new_beacon->beacon_ies = pos;
|
|
|
|
memcpy(pos, beacon->beacon_ies, beacon->beacon_ies_len);
|
|
|
|
pos += beacon->beacon_ies_len;
|
|
|
|
}
|
|
|
|
if (beacon->proberesp_ies_len) {
|
|
|
|
new_beacon->proberesp_ies_len = beacon->proberesp_ies_len;
|
|
|
|
new_beacon->proberesp_ies = pos;
|
|
|
|
memcpy(pos, beacon->proberesp_ies, beacon->proberesp_ies_len);
|
|
|
|
pos += beacon->proberesp_ies_len;
|
|
|
|
}
|
|
|
|
if (beacon->assocresp_ies_len) {
|
|
|
|
new_beacon->assocresp_ies_len = beacon->assocresp_ies_len;
|
|
|
|
new_beacon->assocresp_ies = pos;
|
|
|
|
memcpy(pos, beacon->assocresp_ies, beacon->assocresp_ies_len);
|
|
|
|
pos += beacon->assocresp_ies_len;
|
|
|
|
}
|
|
|
|
if (beacon->probe_resp_len) {
|
|
|
|
new_beacon->probe_resp_len = beacon->probe_resp_len;
|
2018-02-02 15:31:23 +00:00
|
|
|
new_beacon->probe_resp = pos;
|
2013-07-11 14:09:06 +00:00
|
|
|
memcpy(pos, beacon->probe_resp, beacon->probe_resp_len);
|
|
|
|
pos += beacon->probe_resp_len;
|
|
|
|
}
|
2018-10-30 08:17:45 +00:00
|
|
|
|
|
|
|
/* might copy -1, meaning no changes requested */
|
|
|
|
new_beacon->ftm_responder = beacon->ftm_responder;
|
2018-10-04 03:19:20 +00:00
|
|
|
if (beacon->lci) {
|
|
|
|
new_beacon->lci_len = beacon->lci_len;
|
|
|
|
new_beacon->lci = pos;
|
|
|
|
memcpy(pos, beacon->lci, beacon->lci_len);
|
|
|
|
pos += beacon->lci_len;
|
|
|
|
}
|
|
|
|
if (beacon->civicloc) {
|
|
|
|
new_beacon->civicloc_len = beacon->civicloc_len;
|
|
|
|
new_beacon->civicloc = pos;
|
|
|
|
memcpy(pos, beacon->civicloc, beacon->civicloc_len);
|
|
|
|
pos += beacon->civicloc_len;
|
|
|
|
}
|
2013-07-11 14:09:06 +00:00
|
|
|
|
|
|
|
return new_beacon;
|
|
|
|
}
|
|
|
|
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
void ieee80211_csa_finish(struct ieee80211_vif *vif)
|
2013-07-11 14:09:06 +00:00
|
|
|
{
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
|
2013-07-11 14:09:06 +00:00
|
|
|
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
ieee80211_queue_work(&sdata->local->hw,
|
|
|
|
&sdata->csa_finalize_work);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_csa_finish);
|
2013-11-21 17:19:51 +00:00
|
|
|
|
2014-04-09 13:11:00 +00:00
|
|
|
static int ieee80211_set_after_csa_beacon(struct ieee80211_sub_if_data *sdata,
|
|
|
|
u32 *changed)
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
{
|
2014-04-09 13:11:00 +00:00
|
|
|
int err;
|
2013-09-01 14:15:51 +00:00
|
|
|
|
2013-08-28 11:41:31 +00:00
|
|
|
switch (sdata->vif.type) {
|
|
|
|
case NL80211_IFTYPE_AP:
|
2014-06-05 12:21:36 +00:00
|
|
|
err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon,
|
|
|
|
NULL);
|
2014-01-29 06:56:18 +00:00
|
|
|
kfree(sdata->u.ap.next_beacon);
|
|
|
|
sdata->u.ap.next_beacon = NULL;
|
|
|
|
|
2013-08-28 11:41:31 +00:00
|
|
|
if (err < 0)
|
2014-04-09 13:11:00 +00:00
|
|
|
return err;
|
|
|
|
*changed |= err;
|
2013-08-28 11:41:31 +00:00
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_ADHOC:
|
2014-01-29 06:56:17 +00:00
|
|
|
err = ieee80211_ibss_finish_csa(sdata);
|
|
|
|
if (err < 0)
|
2014-04-09 13:11:00 +00:00
|
|
|
return err;
|
|
|
|
*changed |= err;
|
2013-08-28 11:41:31 +00:00
|
|
|
break;
|
2013-10-17 22:55:02 +00:00
|
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
|
|
err = ieee80211_mesh_finish_csa(sdata);
|
|
|
|
if (err < 0)
|
2014-04-09 13:11:00 +00:00
|
|
|
return err;
|
|
|
|
*changed |= err;
|
2013-10-17 22:55:02 +00:00
|
|
|
break;
|
|
|
|
#endif
|
2013-08-28 11:41:31 +00:00
|
|
|
default:
|
|
|
|
WARN_ON(1);
|
2014-04-09 13:11:00 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-05-08 07:10:02 +00:00
|
|
|
static int __ieee80211_csa_finalize(struct ieee80211_sub_if_data *sdata)
|
2014-04-09 13:11:00 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
u32 changed = 0;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
lockdep_assert_held(&local->mtx);
|
2014-06-25 10:35:08 +00:00
|
|
|
lockdep_assert_held(&local->chanctx_mtx);
|
2014-04-09 13:11:00 +00:00
|
|
|
|
2014-06-25 10:35:08 +00:00
|
|
|
/*
|
|
|
|
* using reservation isn't immediate as it may be deferred until later
|
|
|
|
* with multi-vif. once reservation is complete it will re-schedule the
|
|
|
|
* work with no reserved_chanctx so verify chandef to check if it
|
|
|
|
* completed successfully
|
|
|
|
*/
|
2014-04-09 13:11:00 +00:00
|
|
|
|
2014-06-25 10:35:08 +00:00
|
|
|
if (sdata->reserved_chanctx) {
|
|
|
|
/*
|
|
|
|
* with multi-vif csa driver may call ieee80211_csa_finish()
|
|
|
|
* many times while waiting for other interfaces to use their
|
|
|
|
* reservations
|
|
|
|
*/
|
|
|
|
if (sdata->reserved_ready)
|
|
|
|
return 0;
|
|
|
|
|
2014-10-09 18:36:22 +00:00
|
|
|
return ieee80211_vif_use_reserved_context(sdata);
|
2013-08-28 11:41:31 +00:00
|
|
|
}
|
2013-07-11 14:09:06 +00:00
|
|
|
|
2014-06-25 10:35:08 +00:00
|
|
|
if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
|
|
|
|
&sdata->csa_chandef))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2014-04-09 13:11:00 +00:00
|
|
|
sdata->vif.csa_active = false;
|
|
|
|
|
|
|
|
err = ieee80211_set_after_csa_beacon(sdata, &changed);
|
|
|
|
if (err)
|
2014-05-08 07:10:02 +00:00
|
|
|
return err;
|
2014-01-29 06:56:17 +00:00
|
|
|
|
2014-04-09 13:11:00 +00:00
|
|
|
ieee80211_bss_info_change_notify(sdata, changed);
|
2014-04-09 13:10:59 +00:00
|
|
|
|
2014-06-13 13:30:07 +00:00
|
|
|
if (sdata->csa_block_tx) {
|
|
|
|
ieee80211_wake_vif_queues(local, sdata,
|
|
|
|
IEEE80211_QUEUE_STOP_REASON_CSA);
|
|
|
|
sdata->csa_block_tx = false;
|
|
|
|
}
|
2014-05-08 07:10:02 +00:00
|
|
|
|
2014-10-08 06:48:38 +00:00
|
|
|
err = drv_post_channel_switch(sdata);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
cfg80211_ch_switch_notify(sdata->dev, &sdata->csa_chandef);
|
|
|
|
|
2014-05-08 07:10:02 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ieee80211_csa_finalize(struct ieee80211_sub_if_data *sdata)
|
|
|
|
{
|
|
|
|
if (__ieee80211_csa_finalize(sdata)) {
|
|
|
|
sdata_info(sdata, "failed to finalize CSA, disconnecting\n");
|
|
|
|
cfg80211_stop_iface(sdata->local->hw.wiphy, &sdata->wdev,
|
|
|
|
GFP_KERNEL);
|
|
|
|
}
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void ieee80211_csa_finalize_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata =
|
|
|
|
container_of(work, struct ieee80211_sub_if_data,
|
|
|
|
csa_finalize_work);
|
2014-04-09 13:10:59 +00:00
|
|
|
struct ieee80211_local *local = sdata->local;
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
|
|
|
|
sdata_lock(sdata);
|
2014-04-09 13:10:59 +00:00
|
|
|
mutex_lock(&local->mtx);
|
2014-06-25 10:35:08 +00:00
|
|
|
mutex_lock(&local->chanctx_mtx);
|
2014-04-09 13:10:59 +00:00
|
|
|
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
/* AP might have been stopped while waiting for the lock. */
|
|
|
|
if (!sdata->vif.csa_active)
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
if (!ieee80211_sdata_running(sdata))
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
ieee80211_csa_finalize(sdata);
|
2013-11-21 17:19:51 +00:00
|
|
|
|
|
|
|
unlock:
|
2014-06-25 10:35:08 +00:00
|
|
|
mutex_unlock(&local->chanctx_mtx);
|
2014-04-09 13:10:59 +00:00
|
|
|
mutex_unlock(&local->mtx);
|
2013-11-21 17:19:51 +00:00
|
|
|
sdata_unlock(sdata);
|
2013-07-11 14:09:06 +00:00
|
|
|
}
|
|
|
|
|
2014-02-28 14:59:06 +00:00
|
|
|
static int ieee80211_set_csa_beacon(struct ieee80211_sub_if_data *sdata,
|
|
|
|
struct cfg80211_csa_settings *params,
|
|
|
|
u32 *changed)
|
2013-07-11 14:09:06 +00:00
|
|
|
{
|
2014-06-05 12:21:36 +00:00
|
|
|
struct ieee80211_csa_settings csa = {};
|
2014-02-28 14:59:06 +00:00
|
|
|
int err;
|
2013-07-11 14:09:06 +00:00
|
|
|
|
|
|
|
switch (sdata->vif.type) {
|
|
|
|
case NL80211_IFTYPE_AP:
|
2013-08-28 11:41:31 +00:00
|
|
|
sdata->u.ap.next_beacon =
|
|
|
|
cfg80211_beacon_dup(¶ms->beacon_after);
|
|
|
|
if (!sdata->u.ap.next_beacon)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
/*
|
|
|
|
* With a count of 0, we don't have to wait for any
|
|
|
|
* TBTT before switching, so complete the CSA
|
|
|
|
* immediately. In theory, with a count == 1 we
|
|
|
|
* should delay the switch until just before the next
|
|
|
|
* TBTT, but that would complicate things so we switch
|
|
|
|
* immediately too. If we would delay the switch
|
|
|
|
* until the next TBTT, we would have to set the probe
|
|
|
|
* response here.
|
|
|
|
*
|
|
|
|
* TODO: A channel switch with count <= 1 without
|
|
|
|
* sending a CSA action frame is kind of useless,
|
|
|
|
* because the clients won't know we're changing
|
|
|
|
* channels. The action frame must be implemented
|
|
|
|
* either here or in the userspace.
|
|
|
|
*/
|
|
|
|
if (params->count <= 1)
|
|
|
|
break;
|
|
|
|
|
2014-05-09 11:11:47 +00:00
|
|
|
if ((params->n_counter_offsets_beacon >
|
|
|
|
IEEE80211_MAX_CSA_COUNTERS_NUM) ||
|
|
|
|
(params->n_counter_offsets_presp >
|
|
|
|
IEEE80211_MAX_CSA_COUNTERS_NUM))
|
|
|
|
return -EINVAL;
|
2014-05-09 11:11:46 +00:00
|
|
|
|
2014-06-05 12:21:36 +00:00
|
|
|
csa.counter_offsets_beacon = params->counter_offsets_beacon;
|
|
|
|
csa.counter_offsets_presp = params->counter_offsets_presp;
|
|
|
|
csa.n_counter_offsets_beacon = params->n_counter_offsets_beacon;
|
|
|
|
csa.n_counter_offsets_presp = params->n_counter_offsets_presp;
|
|
|
|
csa.count = params->count;
|
2014-05-09 11:11:46 +00:00
|
|
|
|
2014-06-05 12:21:36 +00:00
|
|
|
err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa, &csa);
|
2013-08-28 11:41:31 +00:00
|
|
|
if (err < 0) {
|
|
|
|
kfree(sdata->u.ap.next_beacon);
|
|
|
|
return err;
|
|
|
|
}
|
2014-02-28 14:59:06 +00:00
|
|
|
*changed |= err;
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
|
2013-08-28 11:41:31 +00:00
|
|
|
break;
|
|
|
|
case NL80211_IFTYPE_ADHOC:
|
|
|
|
if (!sdata->vif.bss_conf.ibss_joined)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (params->chandef.width != sdata->u.ibss.chandef.width)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
switch (params->chandef.width) {
|
|
|
|
case NL80211_CHAN_WIDTH_40:
|
|
|
|
if (cfg80211_get_chandef_type(¶ms->chandef) !=
|
|
|
|
cfg80211_get_chandef_type(&sdata->u.ibss.chandef))
|
|
|
|
return -EINVAL;
|
|
|
|
case NL80211_CHAN_WIDTH_5:
|
|
|
|
case NL80211_CHAN_WIDTH_10:
|
|
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
|
|
case NL80211_CHAN_WIDTH_20:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* changes into another band are not supported */
|
|
|
|
if (sdata->u.ibss.chandef.chan->band !=
|
|
|
|
params->chandef.chan->band)
|
|
|
|
return -EINVAL;
|
|
|
|
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
/* see comments in the NL80211_IFTYPE_AP block */
|
|
|
|
if (params->count > 1) {
|
|
|
|
err = ieee80211_ibss_csa_beacon(sdata, params);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
2014-02-28 14:59:06 +00:00
|
|
|
*changed |= err;
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
ieee80211_send_action_csa(sdata, params);
|
|
|
|
|
2013-07-11 14:09:06 +00:00
|
|
|
break;
|
2013-10-15 02:08:28 +00:00
|
|
|
#ifdef CONFIG_MAC80211_MESH
|
2014-02-28 14:59:06 +00:00
|
|
|
case NL80211_IFTYPE_MESH_POINT: {
|
|
|
|
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
|
2013-10-15 02:08:28 +00:00
|
|
|
|
|
|
|
if (params->chandef.width != sdata->vif.bss_conf.chandef.width)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* changes into another band are not supported */
|
|
|
|
if (sdata->vif.bss_conf.chandef.chan->band !=
|
|
|
|
params->chandef.chan->band)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2014-01-22 06:53:04 +00:00
|
|
|
if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_NONE) {
|
2014-01-13 17:42:58 +00:00
|
|
|
ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_INIT;
|
2014-01-22 06:53:04 +00:00
|
|
|
if (!ifmsh->pre_value)
|
|
|
|
ifmsh->pre_value = 1;
|
|
|
|
else
|
|
|
|
ifmsh->pre_value++;
|
|
|
|
}
|
2014-01-13 17:42:58 +00:00
|
|
|
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
/* see comments in the NL80211_IFTYPE_AP block */
|
|
|
|
if (params->count > 1) {
|
|
|
|
err = ieee80211_mesh_csa_beacon(sdata, params);
|
|
|
|
if (err < 0) {
|
|
|
|
ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
|
|
|
|
return err;
|
|
|
|
}
|
2014-02-28 14:59:06 +00:00
|
|
|
*changed |= err;
|
2013-11-08 07:09:43 +00:00
|
|
|
}
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
|
|
|
|
if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT)
|
|
|
|
ieee80211_send_action_csa(sdata, params);
|
|
|
|
|
2013-10-15 02:08:28 +00:00
|
|
|
break;
|
2014-02-28 14:59:06 +00:00
|
|
|
}
|
2013-10-15 02:08:28 +00:00
|
|
|
#endif
|
2013-07-11 14:09:06 +00:00
|
|
|
default:
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
2014-02-28 14:59:06 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-05-07 17:05:12 +00:00
|
|
|
static int
|
|
|
|
__ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
struct cfg80211_csa_settings *params)
|
2014-02-28 14:59:06 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_local *local = sdata->local;
|
2014-10-08 06:48:37 +00:00
|
|
|
struct ieee80211_channel_switch ch_switch;
|
2014-04-09 13:29:32 +00:00
|
|
|
struct ieee80211_chanctx_conf *conf;
|
2014-02-28 14:59:06 +00:00
|
|
|
struct ieee80211_chanctx *chanctx;
|
2014-10-20 19:36:04 +00:00
|
|
|
u32 changed = 0;
|
|
|
|
int err;
|
2014-02-28 14:59:06 +00:00
|
|
|
|
|
|
|
sdata_assert_lock(sdata);
|
2014-04-09 13:10:59 +00:00
|
|
|
lockdep_assert_held(&local->mtx);
|
2014-02-28 14:59:06 +00:00
|
|
|
|
|
|
|
if (!list_empty(&local->roc_list) || local->scanning)
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
if (sdata->wdev.cac_started)
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
if (cfg80211_chandef_identical(¶ms->chandef,
|
|
|
|
&sdata->vif.bss_conf.chandef))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2014-06-25 10:35:08 +00:00
|
|
|
/* don't allow another channel switch if one is already active. */
|
|
|
|
if (sdata->vif.csa_active)
|
|
|
|
return -EBUSY;
|
|
|
|
|
2014-04-09 13:29:32 +00:00
|
|
|
mutex_lock(&local->chanctx_mtx);
|
|
|
|
conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
|
|
|
|
lockdep_is_held(&local->chanctx_mtx));
|
|
|
|
if (!conf) {
|
2014-06-25 10:35:08 +00:00
|
|
|
err = -EBUSY;
|
|
|
|
goto out;
|
2014-02-28 14:59:06 +00:00
|
|
|
}
|
|
|
|
|
2020-04-02 01:18:04 +00:00
|
|
|
if (params->chandef.chan->freq_offset) {
|
|
|
|
/* this may work, but is untested */
|
|
|
|
err = -EOPNOTSUPP;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2014-04-09 13:29:32 +00:00
|
|
|
chanctx = container_of(conf, struct ieee80211_chanctx, conf);
|
2014-02-28 14:59:06 +00:00
|
|
|
|
2014-11-07 13:28:33 +00:00
|
|
|
ch_switch.timestamp = 0;
|
|
|
|
ch_switch.device_timestamp = 0;
|
|
|
|
ch_switch.block_tx = params->block_tx;
|
|
|
|
ch_switch.chandef = params->chandef;
|
|
|
|
ch_switch.count = params->count;
|
|
|
|
|
2014-10-08 06:48:37 +00:00
|
|
|
err = drv_pre_channel_switch(sdata, &ch_switch);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
2014-06-25 10:35:08 +00:00
|
|
|
err = ieee80211_vif_reserve_chanctx(sdata, ¶ms->chandef,
|
|
|
|
chanctx->mode,
|
|
|
|
params->radar_required);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
2014-02-28 14:59:06 +00:00
|
|
|
|
2014-06-25 10:35:08 +00:00
|
|
|
/* if reservation is invalid then this will fail */
|
|
|
|
err = ieee80211_check_combinations(sdata, NULL, chanctx->mode, 0);
|
|
|
|
if (err) {
|
|
|
|
ieee80211_vif_unreserve_chanctx(sdata);
|
|
|
|
goto out;
|
|
|
|
}
|
2014-02-28 14:59:06 +00:00
|
|
|
|
|
|
|
err = ieee80211_set_csa_beacon(sdata, params, &changed);
|
2014-06-25 10:35:08 +00:00
|
|
|
if (err) {
|
|
|
|
ieee80211_vif_unreserve_chanctx(sdata);
|
|
|
|
goto out;
|
|
|
|
}
|
2014-02-28 14:59:06 +00:00
|
|
|
|
2013-11-11 18:34:54 +00:00
|
|
|
sdata->csa_chandef = params->chandef;
|
2014-04-09 13:10:59 +00:00
|
|
|
sdata->csa_block_tx = params->block_tx;
|
2013-07-11 14:09:06 +00:00
|
|
|
sdata->vif.csa_active = true;
|
|
|
|
|
2014-04-09 13:10:59 +00:00
|
|
|
if (sdata->csa_block_tx)
|
2014-06-13 13:30:07 +00:00
|
|
|
ieee80211_stop_vif_queues(local, sdata,
|
|
|
|
IEEE80211_QUEUE_STOP_REASON_CSA);
|
2014-04-09 13:10:59 +00:00
|
|
|
|
2014-11-07 12:31:36 +00:00
|
|
|
cfg80211_ch_switch_started_notify(sdata->dev, &sdata->csa_chandef,
|
|
|
|
params->count);
|
|
|
|
|
mac80211: only set CSA beacon when at least one beacon must be transmitted
A beacon should never have a Channel Switch Announcement information
element with a count of 0, because a count of 1 means switch just
before the next beacon. So, if a count of 0 was valid in a beacon, it
would have been transmitted in the next channel already, which is
useless. A CSA count equal to zero is only meaningful in action
frames or probe_responses.
Fix the ieee80211_csa_is_complete() and ieee80211_update_csa()
functions accordingly.
With a CSA count of 0, we won't transmit any CSA beacons, because the
switch will happen before the next TBTT. To avoid extra work and
potential confusion in the drivers, complete the CSA immediately,
instead of waiting for the driver to call ieee80211_csa_finish().
To keep things simpler, we also switch immediately when the CSA count
is 1, while in theory we should delay the switch until just before the
next TBTT.
Additionally, move the ieee80211_csa_finish() function to cfg.c,
where it makes more sense.
Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-13 17:43:00 +00:00
|
|
|
if (changed) {
|
|
|
|
ieee80211_bss_info_change_notify(sdata, changed);
|
|
|
|
drv_channel_switch_beacon(sdata, ¶ms->chandef);
|
|
|
|
} else {
|
|
|
|
/* if the beacon didn't change, we can finalize immediately */
|
|
|
|
ieee80211_csa_finalize(sdata);
|
|
|
|
}
|
2013-07-11 14:09:06 +00:00
|
|
|
|
2014-06-25 10:35:08 +00:00
|
|
|
out:
|
|
|
|
mutex_unlock(&local->chanctx_mtx);
|
|
|
|
return err;
|
2013-07-11 14:09:06 +00:00
|
|
|
}
|
|
|
|
|
2014-04-09 13:10:59 +00:00
|
|
|
int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
struct cfg80211_csa_settings *params)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
mutex_lock(&local->mtx);
|
|
|
|
err = __ieee80211_channel_switch(wiphy, dev, params);
|
|
|
|
mutex_unlock(&local->mtx);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2015-11-23 16:18:35 +00:00
|
|
|
u64 ieee80211_mgmt_tx_cookie(struct ieee80211_local *local)
|
|
|
|
{
|
|
|
|
lockdep_assert_held(&local->mtx);
|
|
|
|
|
|
|
|
local->roc_cookie_counter++;
|
|
|
|
|
|
|
|
/* wow, you wrapped 64 bits ... more likely a bug */
|
|
|
|
if (WARN_ON(local->roc_cookie_counter == 0))
|
|
|
|
local->roc_cookie_counter++;
|
|
|
|
|
|
|
|
return local->roc_cookie_counter;
|
|
|
|
}
|
|
|
|
|
2015-11-24 13:25:49 +00:00
|
|
|
int ieee80211_attach_ack_skb(struct ieee80211_local *local, struct sk_buff *skb,
|
|
|
|
u64 *cookie, gfp_t gfp)
|
2015-06-01 21:14:59 +00:00
|
|
|
{
|
|
|
|
unsigned long spin_flags;
|
|
|
|
struct sk_buff *ack_skb;
|
|
|
|
int id;
|
|
|
|
|
|
|
|
ack_skb = skb_copy(skb, gfp);
|
|
|
|
if (!ack_skb)
|
2015-11-24 13:25:49 +00:00
|
|
|
return -ENOMEM;
|
2015-06-01 21:14:59 +00:00
|
|
|
|
|
|
|
spin_lock_irqsave(&local->ack_status_lock, spin_flags);
|
|
|
|
id = idr_alloc(&local->ack_status_frames, ack_skb,
|
2020-01-15 11:25:50 +00:00
|
|
|
1, 0x2000, GFP_ATOMIC);
|
2015-06-01 21:14:59 +00:00
|
|
|
spin_unlock_irqrestore(&local->ack_status_lock, spin_flags);
|
|
|
|
|
|
|
|
if (id < 0) {
|
|
|
|
kfree_skb(ack_skb);
|
2015-11-24 13:25:49 +00:00
|
|
|
return -ENOMEM;
|
2015-06-01 21:14:59 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
IEEE80211_SKB_CB(skb)->ack_frame_id = id;
|
|
|
|
|
|
|
|
*cookie = ieee80211_mgmt_tx_cookie(local);
|
|
|
|
IEEE80211_SKB_CB(ack_skb)->ack.cookie = *cookie;
|
|
|
|
|
2015-11-24 13:25:49 +00:00
|
|
|
return 0;
|
2015-06-01 21:14:59 +00:00
|
|
|
}
|
|
|
|
|
2020-04-17 10:43:01 +00:00
|
|
|
static void
|
|
|
|
ieee80211_update_mgmt_frame_registrations(struct wiphy *wiphy,
|
2012-06-15 13:30:18 +00:00
|
|
|
struct wireless_dev *wdev,
|
2020-04-17 10:43:01 +00:00
|
|
|
struct mgmt_frame_regs *upd)
|
2010-10-13 10:06:24 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2015-08-15 19:39:50 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
2020-04-17 10:43:01 +00:00
|
|
|
u32 preq_mask = BIT(IEEE80211_STYPE_PROBE_REQ >> 4);
|
2020-04-21 14:48:15 +00:00
|
|
|
u32 action_mask = BIT(IEEE80211_STYPE_ACTION >> 4);
|
2020-04-17 10:43:01 +00:00
|
|
|
bool global_change, intf_change;
|
2010-10-13 10:06:24 +00:00
|
|
|
|
2020-04-17 10:43:01 +00:00
|
|
|
global_change =
|
2020-04-21 14:48:15 +00:00
|
|
|
(local->probe_req_reg != !!(upd->global_stypes & preq_mask)) ||
|
|
|
|
(local->rx_mcast_action_reg !=
|
|
|
|
!!(upd->global_mcast_stypes & action_mask));
|
2020-04-17 10:43:01 +00:00
|
|
|
local->probe_req_reg = upd->global_stypes & preq_mask;
|
2020-04-21 14:48:15 +00:00
|
|
|
local->rx_mcast_action_reg = upd->global_mcast_stypes & action_mask;
|
2015-08-15 19:39:50 +00:00
|
|
|
|
2020-04-21 14:48:15 +00:00
|
|
|
intf_change = (sdata->vif.probe_req_reg !=
|
|
|
|
!!(upd->interface_stypes & preq_mask)) ||
|
|
|
|
(sdata->vif.rx_mcast_action_reg !=
|
|
|
|
!!(upd->interface_mcast_stypes & action_mask));
|
2020-04-17 10:43:01 +00:00
|
|
|
sdata->vif.probe_req_reg = upd->interface_stypes & preq_mask;
|
2020-04-21 14:48:15 +00:00
|
|
|
sdata->vif.rx_mcast_action_reg =
|
|
|
|
upd->interface_mcast_stypes & action_mask;
|
2010-10-13 10:06:24 +00:00
|
|
|
|
2020-04-17 10:43:01 +00:00
|
|
|
if (!local->open_count)
|
|
|
|
return;
|
2012-10-31 14:50:34 +00:00
|
|
|
|
2020-04-17 10:43:01 +00:00
|
|
|
if (intf_change && ieee80211_sdata_running(sdata))
|
|
|
|
drv_config_iface_filter(local, sdata,
|
|
|
|
sdata->vif.probe_req_reg ?
|
|
|
|
FIF_PROBE_REQ : 0,
|
|
|
|
FIF_PROBE_REQ);
|
2015-08-15 19:39:50 +00:00
|
|
|
|
2020-04-17 10:43:01 +00:00
|
|
|
if (global_change)
|
2015-08-15 19:39:50 +00:00
|
|
|
ieee80211_configure_filter(local);
|
2010-10-13 10:06:24 +00:00
|
|
|
}
|
|
|
|
|
2010-11-10 03:50:56 +00:00
|
|
|
static int ieee80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
|
|
|
|
|
|
|
if (local->started)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
return drv_set_antenna(local, tx_ant, rx_ant);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_get_antenna(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
|
|
|
|
|
|
|
return drv_get_antenna(local, tx_ant, rx_ant);
|
|
|
|
}
|
|
|
|
|
2011-07-05 14:35:41 +00:00
|
|
|
static int ieee80211_set_rekey_data(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
struct cfg80211_gtk_rekey_data *data)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
if (!local->ops->set_rekey_data)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
drv_set_rekey_data(local, sdata, data);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-11-04 10:18:16 +00:00
|
|
|
static int ieee80211_probe_client(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
const u8 *peer, u64 *cookie)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
struct ieee80211_qos_hdr *nullfunc;
|
2015-11-24 13:25:49 +00:00
|
|
|
struct sk_buff *skb;
|
2011-11-04 10:18:16 +00:00
|
|
|
int size = sizeof(*nullfunc);
|
|
|
|
__le16 fc;
|
|
|
|
bool qos;
|
|
|
|
struct ieee80211_tx_info *info;
|
|
|
|
struct sta_info *sta;
|
2012-07-26 15:24:39 +00:00
|
|
|
struct ieee80211_chanctx_conf *chanctx_conf;
|
2016-04-12 13:56:15 +00:00
|
|
|
enum nl80211_band band;
|
2015-06-01 21:14:59 +00:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* the lock is needed to assign the cookie later */
|
|
|
|
mutex_lock(&local->mtx);
|
2011-11-04 10:18:16 +00:00
|
|
|
|
|
|
|
rcu_read_lock();
|
2012-07-26 15:24:39 +00:00
|
|
|
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
|
|
|
|
if (WARN_ON(!chanctx_conf)) {
|
2015-06-01 21:14:59 +00:00
|
|
|
ret = -EINVAL;
|
|
|
|
goto unlock;
|
2012-07-26 15:24:39 +00:00
|
|
|
}
|
2012-11-09 10:39:59 +00:00
|
|
|
band = chanctx_conf->def.chan->band;
|
2013-09-29 19:39:33 +00:00
|
|
|
sta = sta_info_get_bss(sdata, peer);
|
2011-11-11 19:22:30 +00:00
|
|
|
if (sta) {
|
2014-07-22 12:50:47 +00:00
|
|
|
qos = sta->sta.wme;
|
2011-11-11 19:22:30 +00:00
|
|
|
} else {
|
2015-06-01 21:14:59 +00:00
|
|
|
ret = -ENOLINK;
|
|
|
|
goto unlock;
|
2011-11-11 19:22:30 +00:00
|
|
|
}
|
2011-11-04 10:18:16 +00:00
|
|
|
|
|
|
|
if (qos) {
|
|
|
|
fc = cpu_to_le16(IEEE80211_FTYPE_DATA |
|
|
|
|
IEEE80211_STYPE_QOS_NULLFUNC |
|
|
|
|
IEEE80211_FCTL_FROMDS);
|
|
|
|
} else {
|
|
|
|
size -= 2;
|
|
|
|
fc = cpu_to_le16(IEEE80211_FTYPE_DATA |
|
|
|
|
IEEE80211_STYPE_NULLFUNC |
|
|
|
|
IEEE80211_FCTL_FROMDS);
|
|
|
|
}
|
|
|
|
|
|
|
|
skb = dev_alloc_skb(local->hw.extra_tx_headroom + size);
|
2012-07-26 15:24:39 +00:00
|
|
|
if (!skb) {
|
2015-06-01 21:14:59 +00:00
|
|
|
ret = -ENOMEM;
|
|
|
|
goto unlock;
|
2012-07-26 15:24:39 +00:00
|
|
|
}
|
2011-11-04 10:18:16 +00:00
|
|
|
|
|
|
|
skb->dev = dev;
|
|
|
|
|
|
|
|
skb_reserve(skb, local->hw.extra_tx_headroom);
|
|
|
|
|
networking: make skb_put & friends return void pointers
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions (skb_put, __skb_put and pskb_put) return void *
and remove all the casts across the tree, adding a (u8 *) cast only
where the unsigned char pointer was used directly, all done with the
following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_put, __skb_put };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = { skb_put, __skb_put };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
which actually doesn't cover pskb_put since there are only three
users overall.
A handful of stragglers were converted manually, notably a macro in
drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many
instances in net/bluetooth/hci_sock.c. In the former file, I also
had to fix one whitespace problem spatch introduced.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 12:29:21 +00:00
|
|
|
nullfunc = skb_put(skb, size);
|
2011-11-04 10:18:16 +00:00
|
|
|
nullfunc->frame_control = fc;
|
|
|
|
nullfunc->duration_id = 0;
|
|
|
|
memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN);
|
|
|
|
memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
|
|
|
|
memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN);
|
|
|
|
nullfunc->seq_ctrl = 0;
|
|
|
|
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
|
|
|
|
|
|
info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
|
|
|
|
IEEE80211_TX_INTFL_NL80211_FRAME_TX;
|
2014-11-09 16:50:09 +00:00
|
|
|
info->band = band;
|
2011-11-04 10:18:16 +00:00
|
|
|
|
|
|
|
skb_set_queue_mapping(skb, IEEE80211_AC_VO);
|
|
|
|
skb->priority = 7;
|
|
|
|
if (qos)
|
|
|
|
nullfunc->qos_ctrl = cpu_to_le16(7);
|
|
|
|
|
2015-11-24 13:25:49 +00:00
|
|
|
ret = ieee80211_attach_ack_skb(local, skb, cookie, GFP_ATOMIC);
|
|
|
|
if (ret) {
|
2015-06-01 21:14:59 +00:00
|
|
|
kfree_skb(skb);
|
|
|
|
goto unlock;
|
|
|
|
}
|
|
|
|
|
2011-11-04 10:18:16 +00:00
|
|
|
local_bh_disable();
|
2018-05-28 13:47:41 +00:00
|
|
|
ieee80211_xmit(sdata, sta, skb, 0);
|
2011-11-04 10:18:16 +00:00
|
|
|
local_bh_enable();
|
2015-06-01 21:14:59 +00:00
|
|
|
|
|
|
|
ret = 0;
|
|
|
|
unlock:
|
2012-07-26 15:24:39 +00:00
|
|
|
rcu_read_unlock();
|
2015-06-01 21:14:59 +00:00
|
|
|
mutex_unlock(&local->mtx);
|
2011-11-04 10:18:16 +00:00
|
|
|
|
2015-06-01 21:14:59 +00:00
|
|
|
return ret;
|
2011-11-04 10:18:16 +00:00
|
|
|
}
|
|
|
|
|
2012-11-08 20:25:48 +00:00
|
|
|
static int ieee80211_cfg_get_channel(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev,
|
|
|
|
struct cfg80211_chan_def *chandef)
|
2012-07-12 17:45:08 +00:00
|
|
|
{
|
2012-07-26 15:24:39 +00:00
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
2013-02-23 18:02:14 +00:00
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
2012-07-26 15:24:39 +00:00
|
|
|
struct ieee80211_chanctx_conf *chanctx_conf;
|
2012-11-08 20:25:48 +00:00
|
|
|
int ret = -ENODATA;
|
2012-07-26 15:24:39 +00:00
|
|
|
|
|
|
|
rcu_read_lock();
|
2013-02-28 08:59:22 +00:00
|
|
|
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
|
|
|
|
if (chanctx_conf) {
|
2014-09-30 04:08:02 +00:00
|
|
|
*chandef = sdata->vif.bss_conf.chandef;
|
2013-02-28 08:59:22 +00:00
|
|
|
ret = 0;
|
|
|
|
} else if (local->open_count > 0 &&
|
|
|
|
local->open_count == local->monitors &&
|
|
|
|
sdata->vif.type == NL80211_IFTYPE_MONITOR) {
|
|
|
|
if (local->use_chanctx)
|
|
|
|
*chandef = local->monitor_chandef;
|
|
|
|
else
|
2013-03-25 15:26:57 +00:00
|
|
|
*chandef = local->_oper_chandef;
|
2012-11-08 20:25:48 +00:00
|
|
|
ret = 0;
|
2012-07-26 15:24:39 +00:00
|
|
|
}
|
|
|
|
rcu_read_unlock();
|
2012-07-12 17:45:08 +00:00
|
|
|
|
2012-11-08 20:25:48 +00:00
|
|
|
return ret;
|
2012-07-12 17:45:08 +00:00
|
|
|
}
|
|
|
|
|
2012-04-04 13:05:25 +00:00
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static void ieee80211_set_wakeup(struct wiphy *wiphy, bool enabled)
|
|
|
|
{
|
|
|
|
drv_set_wakeup(wiphy_priv(wiphy), enabled);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2013-12-17 07:04:43 +00:00
|
|
|
static int ieee80211_set_qos_map(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
struct cfg80211_qos_map *qos_map)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct mac80211_qos_map *new_qos_map, *old_qos_map;
|
|
|
|
|
|
|
|
if (qos_map) {
|
|
|
|
new_qos_map = kzalloc(sizeof(*new_qos_map), GFP_KERNEL);
|
|
|
|
if (!new_qos_map)
|
|
|
|
return -ENOMEM;
|
|
|
|
memcpy(&new_qos_map->qos_map, qos_map, sizeof(*qos_map));
|
|
|
|
} else {
|
|
|
|
/* A NULL qos_map was passed to disable QoS mapping */
|
|
|
|
new_qos_map = NULL;
|
|
|
|
}
|
|
|
|
|
2013-12-30 22:12:37 +00:00
|
|
|
old_qos_map = sdata_dereference(sdata->qos_map, sdata);
|
2013-12-17 07:04:43 +00:00
|
|
|
rcu_assign_pointer(sdata->qos_map, new_qos_map);
|
|
|
|
if (old_qos_map)
|
|
|
|
kfree_rcu(old_qos_map, rcu_head);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-04-28 08:22:25 +00:00
|
|
|
static int ieee80211_set_ap_chanwidth(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
struct cfg80211_chan_def *chandef)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
int ret;
|
|
|
|
u32 changed = 0;
|
|
|
|
|
|
|
|
ret = ieee80211_vif_change_bandwidth(sdata, chandef, &changed);
|
|
|
|
if (ret == 0)
|
|
|
|
ieee80211_bss_info_change_notify(sdata, changed);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-10-07 07:38:50 +00:00
|
|
|
static int ieee80211_add_tx_ts(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
u8 tsid, const u8 *peer, u8 up,
|
|
|
|
u16 admitted_time)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
|
|
int ac = ieee802_1d_to_ac[up];
|
|
|
|
|
|
|
|
if (sdata->vif.type != NL80211_IFTYPE_STATION)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
if (!(sdata->wmm_acm & BIT(up)))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (ifmgd->tx_tspec[ac].admitted_time)
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
if (admitted_time) {
|
|
|
|
ifmgd->tx_tspec[ac].admitted_time = 32 * admitted_time;
|
|
|
|
ifmgd->tx_tspec[ac].tsid = tsid;
|
|
|
|
ifmgd->tx_tspec[ac].up = up;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_del_tx_ts(struct wiphy *wiphy, struct net_device *dev,
|
|
|
|
u8 tsid, const u8 *peer)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
|
|
|
int ac;
|
|
|
|
|
|
|
|
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
|
|
|
|
struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
|
|
|
|
|
|
|
|
/* skip unused entries */
|
|
|
|
if (!tx_tspec->admitted_time)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (tx_tspec->tsid != tsid)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* due to this new packets will be reassigned to non-ACM ACs */
|
|
|
|
tx_tspec->up = -1;
|
|
|
|
|
|
|
|
/* Make sure that all packets have been sent to avoid to
|
|
|
|
* restore the QoS params on packets that are still on the
|
|
|
|
* queues.
|
|
|
|
*/
|
|
|
|
synchronize_net();
|
2015-01-07 13:42:39 +00:00
|
|
|
ieee80211_flush_queues(local, sdata, false);
|
2014-10-07 07:38:50 +00:00
|
|
|
|
|
|
|
/* restore the normal QoS parameters
|
|
|
|
* (unconditionally to avoid races)
|
|
|
|
*/
|
|
|
|
tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
|
|
|
|
tx_tspec->downgraded = false;
|
|
|
|
ieee80211_sta_handle_tspec_ac_params(sdata);
|
|
|
|
|
|
|
|
/* finally clear all the data */
|
|
|
|
memset(tx_tspec, 0, sizeof(*tx_tspec));
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
2016-09-20 14:31:20 +00:00
|
|
|
void ieee80211_nan_func_terminated(struct ieee80211_vif *vif,
|
|
|
|
u8 inst_id,
|
|
|
|
enum nl80211_nan_func_term_reason reason,
|
|
|
|
gfp_t gfp)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
|
|
|
|
struct cfg80211_nan_func *func;
|
|
|
|
u64 cookie;
|
|
|
|
|
|
|
|
if (WARN_ON(vif->type != NL80211_IFTYPE_NAN))
|
|
|
|
return;
|
|
|
|
|
|
|
|
spin_lock_bh(&sdata->u.nan.func_lock);
|
|
|
|
|
|
|
|
func = idr_find(&sdata->u.nan.function_inst_ids, inst_id);
|
|
|
|
if (WARN_ON(!func)) {
|
|
|
|
spin_unlock_bh(&sdata->u.nan.func_lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
cookie = func->cookie;
|
|
|
|
idr_remove(&sdata->u.nan.function_inst_ids, inst_id);
|
|
|
|
|
|
|
|
spin_unlock_bh(&sdata->u.nan.func_lock);
|
|
|
|
|
|
|
|
cfg80211_free_nan_func(func);
|
|
|
|
|
|
|
|
cfg80211_nan_func_terminated(ieee80211_vif_to_wdev(vif), inst_id,
|
|
|
|
reason, cookie, gfp);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_nan_func_terminated);
|
|
|
|
|
2016-09-20 14:31:21 +00:00
|
|
|
void ieee80211_nan_func_match(struct ieee80211_vif *vif,
|
|
|
|
struct cfg80211_nan_match_params *match,
|
|
|
|
gfp_t gfp)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
|
|
|
|
struct cfg80211_nan_func *func;
|
|
|
|
|
|
|
|
if (WARN_ON(vif->type != NL80211_IFTYPE_NAN))
|
|
|
|
return;
|
|
|
|
|
|
|
|
spin_lock_bh(&sdata->u.nan.func_lock);
|
|
|
|
|
|
|
|
func = idr_find(&sdata->u.nan.function_inst_ids, match->inst_id);
|
|
|
|
if (WARN_ON(!func)) {
|
|
|
|
spin_unlock_bh(&sdata->u.nan.func_lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
match->cookie = func->cookie;
|
|
|
|
|
|
|
|
spin_unlock_bh(&sdata->u.nan.func_lock);
|
|
|
|
|
|
|
|
cfg80211_nan_match(ieee80211_vif_to_wdev(vif), match, gfp);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_nan_func_match);
|
|
|
|
|
2016-11-22 10:52:18 +00:00
|
|
|
static int ieee80211_set_multicast_to_unicast(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
const bool enabled)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
sdata->u.ap.multicast_to_unicast = enabled;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-05-08 11:03:50 +00:00
|
|
|
void ieee80211_fill_txq_stats(struct cfg80211_txq_stats *txqstats,
|
|
|
|
struct txq_info *txqi)
|
|
|
|
{
|
|
|
|
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_BACKLOG_BYTES))) {
|
|
|
|
txqstats->filled |= BIT(NL80211_TXQ_STATS_BACKLOG_BYTES);
|
|
|
|
txqstats->backlog_bytes = txqi->tin.backlog_bytes;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_BACKLOG_PACKETS))) {
|
|
|
|
txqstats->filled |= BIT(NL80211_TXQ_STATS_BACKLOG_PACKETS);
|
|
|
|
txqstats->backlog_packets = txqi->tin.backlog_packets;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_FLOWS))) {
|
|
|
|
txqstats->filled |= BIT(NL80211_TXQ_STATS_FLOWS);
|
|
|
|
txqstats->flows = txqi->tin.flows;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_DROPS))) {
|
|
|
|
txqstats->filled |= BIT(NL80211_TXQ_STATS_DROPS);
|
|
|
|
txqstats->drops = txqi->cstats.drop_count;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_ECN_MARKS))) {
|
|
|
|
txqstats->filled |= BIT(NL80211_TXQ_STATS_ECN_MARKS);
|
|
|
|
txqstats->ecn_marks = txqi->cstats.ecn_mark;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_OVERLIMIT))) {
|
|
|
|
txqstats->filled |= BIT(NL80211_TXQ_STATS_OVERLIMIT);
|
|
|
|
txqstats->overlimit = txqi->tin.overlimit;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_COLLISIONS))) {
|
|
|
|
txqstats->filled |= BIT(NL80211_TXQ_STATS_COLLISIONS);
|
|
|
|
txqstats->collisions = txqi->tin.collisions;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_TX_BYTES))) {
|
|
|
|
txqstats->filled |= BIT(NL80211_TXQ_STATS_TX_BYTES);
|
|
|
|
txqstats->tx_bytes = txqi->tin.tx_bytes;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(txqstats->filled & BIT(NL80211_TXQ_STATS_TX_PACKETS))) {
|
|
|
|
txqstats->filled |= BIT(NL80211_TXQ_STATS_TX_PACKETS);
|
|
|
|
txqstats->tx_packets = txqi->tin.tx_packets;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_get_txq_stats(struct wiphy *wiphy,
|
|
|
|
struct wireless_dev *wdev,
|
|
|
|
struct cfg80211_txq_stats *txqstats)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
|
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (!local->ops->wake_tx_queue)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
spin_lock_bh(&local->fq.lock);
|
|
|
|
rcu_read_lock();
|
|
|
|
|
|
|
|
if (wdev) {
|
|
|
|
sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
|
|
if (!sdata->vif.txq) {
|
|
|
|
ret = 1;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
ieee80211_fill_txq_stats(txqstats, to_txq_info(sdata->vif.txq));
|
|
|
|
} else {
|
|
|
|
/* phy stats */
|
|
|
|
txqstats->filled |= BIT(NL80211_TXQ_STATS_BACKLOG_PACKETS) |
|
|
|
|
BIT(NL80211_TXQ_STATS_BACKLOG_BYTES) |
|
|
|
|
BIT(NL80211_TXQ_STATS_OVERLIMIT) |
|
|
|
|
BIT(NL80211_TXQ_STATS_OVERMEMORY) |
|
|
|
|
BIT(NL80211_TXQ_STATS_COLLISIONS) |
|
|
|
|
BIT(NL80211_TXQ_STATS_MAX_FLOWS);
|
|
|
|
txqstats->backlog_packets = local->fq.backlog;
|
|
|
|
txqstats->backlog_bytes = local->fq.memory_usage;
|
|
|
|
txqstats->overlimit = local->fq.overlimit;
|
|
|
|
txqstats->overmemory = local->fq.overmemory;
|
|
|
|
txqstats->collisions = local->fq.collisions;
|
|
|
|
txqstats->max_flows = local->fq.flows_cnt;
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
rcu_read_unlock();
|
|
|
|
spin_unlock_bh(&local->fq.lock);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2018-10-04 03:19:20 +00:00
|
|
|
static int
|
|
|
|
ieee80211_get_ftm_responder_stats(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
struct cfg80211_ftm_responder_stats *ftm_stats)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
return drv_get_ftm_responder_stats(local, sdata, ftm_stats);
|
|
|
|
}
|
|
|
|
|
2018-10-16 09:24:47 +00:00
|
|
|
static int
|
|
|
|
ieee80211_start_pmsr(struct wiphy *wiphy, struct wireless_dev *dev,
|
|
|
|
struct cfg80211_pmsr_request *request)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
return drv_start_pmsr(local, sdata, request);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ieee80211_abort_pmsr(struct wiphy *wiphy, struct wireless_dev *dev,
|
|
|
|
struct cfg80211_pmsr_request *request)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = wiphy_priv(wiphy);
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(dev);
|
|
|
|
|
|
|
|
return drv_abort_pmsr(local, sdata, request);
|
|
|
|
}
|
|
|
|
|
2020-01-20 07:51:27 +00:00
|
|
|
static int ieee80211_set_tid_config(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
|
|
|
struct cfg80211_tid_config *tid_conf)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct sta_info *sta;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!sdata->local->ops->set_tid_config)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
if (!tid_conf->peer)
|
|
|
|
return drv_set_tid_config(sdata->local, sdata, NULL, tid_conf);
|
|
|
|
|
|
|
|
mutex_lock(&sdata->local->sta_mtx);
|
|
|
|
sta = sta_info_get_bss(sdata, tid_conf->peer);
|
|
|
|
if (!sta) {
|
|
|
|
mutex_unlock(&sdata->local->sta_mtx);
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = drv_set_tid_config(sdata->local, sdata, &sta->sta, tid_conf);
|
|
|
|
mutex_unlock(&sdata->local->sta_mtx);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ieee80211_reset_tid_config(struct wiphy *wiphy,
|
|
|
|
struct net_device *dev,
|
2020-04-24 11:29:02 +00:00
|
|
|
const u8 *peer, u8 tids)
|
2020-01-20 07:51:27 +00:00
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
struct sta_info *sta;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!sdata->local->ops->reset_tid_config)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
if (!peer)
|
2020-04-24 11:29:02 +00:00
|
|
|
return drv_reset_tid_config(sdata->local, sdata, NULL, tids);
|
2020-01-20 07:51:27 +00:00
|
|
|
|
|
|
|
mutex_lock(&sdata->local->sta_mtx);
|
|
|
|
sta = sta_info_get_bss(sdata, peer);
|
|
|
|
if (!sta) {
|
|
|
|
mutex_unlock(&sdata->local->sta_mtx);
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
2020-04-24 11:29:02 +00:00
|
|
|
ret = drv_reset_tid_config(sdata->local, sdata, &sta->sta, tids);
|
2020-01-20 07:51:27 +00:00
|
|
|
mutex_unlock(&sdata->local->sta_mtx);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-01-20 22:55:44 +00:00
|
|
|
const struct cfg80211_ops mac80211_config_ops = {
|
2007-05-05 18:45:53 +00:00
|
|
|
.add_virtual_intf = ieee80211_add_iface,
|
|
|
|
.del_virtual_intf = ieee80211_del_iface,
|
2007-09-28 19:52:27 +00:00
|
|
|
.change_virtual_intf = ieee80211_change_iface,
|
2012-06-18 18:07:15 +00:00
|
|
|
.start_p2p_device = ieee80211_start_p2p_device,
|
|
|
|
.stop_p2p_device = ieee80211_stop_p2p_device,
|
2007-12-19 01:03:30 +00:00
|
|
|
.add_key = ieee80211_add_key,
|
|
|
|
.del_key = ieee80211_del_key,
|
2007-12-19 01:03:31 +00:00
|
|
|
.get_key = ieee80211_get_key,
|
2007-12-19 01:03:30 +00:00
|
|
|
.set_default_key = ieee80211_config_default_key,
|
2009-01-08 11:32:02 +00:00
|
|
|
.set_default_mgmt_key = ieee80211_config_default_mgmt_key,
|
2020-02-22 13:25:44 +00:00
|
|
|
.set_default_beacon_key = ieee80211_config_default_beacon_key,
|
2012-02-13 14:17:18 +00:00
|
|
|
.start_ap = ieee80211_start_ap,
|
|
|
|
.change_beacon = ieee80211_change_beacon,
|
|
|
|
.stop_ap = ieee80211_stop_ap,
|
2007-12-19 01:03:35 +00:00
|
|
|
.add_station = ieee80211_add_station,
|
|
|
|
.del_station = ieee80211_del_station,
|
|
|
|
.change_station = ieee80211_change_station,
|
2007-12-19 01:03:37 +00:00
|
|
|
.get_station = ieee80211_get_station,
|
2008-02-23 14:17:17 +00:00
|
|
|
.dump_station = ieee80211_dump_station,
|
2010-04-19 08:23:57 +00:00
|
|
|
.dump_survey = ieee80211_dump_survey,
|
2008-02-23 14:17:17 +00:00
|
|
|
#ifdef CONFIG_MAC80211_MESH
|
|
|
|
.add_mpath = ieee80211_add_mpath,
|
|
|
|
.del_mpath = ieee80211_del_mpath,
|
|
|
|
.change_mpath = ieee80211_change_mpath,
|
|
|
|
.get_mpath = ieee80211_get_mpath,
|
|
|
|
.dump_mpath = ieee80211_dump_mpath,
|
2014-09-12 06:58:50 +00:00
|
|
|
.get_mpp = ieee80211_get_mpp,
|
|
|
|
.dump_mpp = ieee80211_dump_mpp,
|
2010-12-17 01:37:48 +00:00
|
|
|
.update_mesh_config = ieee80211_update_mesh_config,
|
|
|
|
.get_mesh_config = ieee80211_get_mesh_config,
|
2010-12-03 08:20:44 +00:00
|
|
|
.join_mesh = ieee80211_join_mesh,
|
|
|
|
.leave_mesh = ieee80211_leave_mesh,
|
2008-02-23 14:17:17 +00:00
|
|
|
#endif
|
2014-11-03 09:33:19 +00:00
|
|
|
.join_ocb = ieee80211_join_ocb,
|
|
|
|
.leave_ocb = ieee80211_leave_ocb,
|
2008-08-07 17:07:01 +00:00
|
|
|
.change_bss = ieee80211_change_bss,
|
2008-10-30 14:59:24 +00:00
|
|
|
.set_txq_params = ieee80211_set_txq_params,
|
2012-06-06 06:18:22 +00:00
|
|
|
.set_monitor_channel = ieee80211_set_monitor_channel,
|
2009-01-19 16:20:53 +00:00
|
|
|
.suspend = ieee80211_suspend,
|
|
|
|
.resume = ieee80211_resume,
|
2009-02-10 20:25:55 +00:00
|
|
|
.scan = ieee80211_scan,
|
2015-10-30 13:44:50 +00:00
|
|
|
.abort_scan = ieee80211_abort_scan,
|
2011-05-11 14:09:36 +00:00
|
|
|
.sched_scan_start = ieee80211_sched_scan_start,
|
|
|
|
.sched_scan_stop = ieee80211_sched_scan_stop,
|
2009-03-19 11:39:22 +00:00
|
|
|
.auth = ieee80211_auth,
|
|
|
|
.assoc = ieee80211_assoc,
|
|
|
|
.deauth = ieee80211_deauth,
|
|
|
|
.disassoc = ieee80211_disassoc,
|
2009-04-19 19:25:43 +00:00
|
|
|
.join_ibss = ieee80211_join_ibss,
|
|
|
|
.leave_ibss = ieee80211_leave_ibss,
|
2012-11-02 12:27:49 +00:00
|
|
|
.set_mcast_rate = ieee80211_set_mcast_rate,
|
2009-04-20 16:39:05 +00:00
|
|
|
.set_wiphy_params = ieee80211_set_wiphy_params,
|
2009-06-02 11:01:39 +00:00
|
|
|
.set_tx_power = ieee80211_set_tx_power,
|
|
|
|
.get_tx_power = ieee80211_get_tx_power,
|
2009-07-01 19:26:58 +00:00
|
|
|
.set_wds_peer = ieee80211_set_wds_peer,
|
2009-06-02 11:01:41 +00:00
|
|
|
.rfkill_poll = ieee80211_rfkill_poll,
|
2009-07-01 19:26:51 +00:00
|
|
|
CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
|
2011-05-20 16:05:54 +00:00
|
|
|
CFG80211_TESTMODE_DUMP(ieee80211_testmode_dump)
|
2009-07-01 19:26:57 +00:00
|
|
|
.set_power_mgmt = ieee80211_set_power_mgmt,
|
2009-07-01 19:26:59 +00:00
|
|
|
.set_bitrate_mask = ieee80211_set_bitrate_mask,
|
2009-12-23 12:15:42 +00:00
|
|
|
.remain_on_channel = ieee80211_remain_on_channel,
|
|
|
|
.cancel_remain_on_channel = ieee80211_cancel_remain_on_channel,
|
2010-08-12 13:38:38 +00:00
|
|
|
.mgmt_tx = ieee80211_mgmt_tx,
|
2010-11-25 09:02:30 +00:00
|
|
|
.mgmt_tx_cancel_wait = ieee80211_mgmt_tx_cancel_wait,
|
2010-03-23 07:02:34 +00:00
|
|
|
.set_cqm_rssi_config = ieee80211_set_cqm_rssi_config,
|
2017-02-10 03:50:22 +00:00
|
|
|
.set_cqm_rssi_range_config = ieee80211_set_cqm_rssi_range_config,
|
2020-04-17 10:43:01 +00:00
|
|
|
.update_mgmt_frame_registrations =
|
|
|
|
ieee80211_update_mgmt_frame_registrations,
|
2010-11-10 03:50:56 +00:00
|
|
|
.set_antenna = ieee80211_set_antenna,
|
|
|
|
.get_antenna = ieee80211_get_antenna,
|
2011-07-05 14:35:41 +00:00
|
|
|
.set_rekey_data = ieee80211_set_rekey_data,
|
2011-09-28 11:12:52 +00:00
|
|
|
.tdls_oper = ieee80211_tdls_oper,
|
|
|
|
.tdls_mgmt = ieee80211_tdls_mgmt,
|
2014-11-09 16:50:19 +00:00
|
|
|
.tdls_channel_switch = ieee80211_tdls_channel_switch,
|
|
|
|
.tdls_cancel_channel_switch = ieee80211_tdls_cancel_channel_switch,
|
2011-11-04 10:18:16 +00:00
|
|
|
.probe_client = ieee80211_probe_client,
|
2011-11-18 13:20:44 +00:00
|
|
|
.set_noack_map = ieee80211_set_noack_map,
|
2012-04-04 13:05:25 +00:00
|
|
|
#ifdef CONFIG_PM
|
|
|
|
.set_wakeup = ieee80211_set_wakeup,
|
|
|
|
#endif
|
2012-07-12 17:45:08 +00:00
|
|
|
.get_channel = ieee80211_cfg_get_channel,
|
2013-02-08 17:16:20 +00:00
|
|
|
.start_radar_detection = ieee80211_start_radar_detection,
|
2019-12-22 14:55:31 +00:00
|
|
|
.end_cac = ieee80211_end_cac,
|
2013-07-11 14:09:06 +00:00
|
|
|
.channel_switch = ieee80211_channel_switch,
|
2013-12-17 07:04:43 +00:00
|
|
|
.set_qos_map = ieee80211_set_qos_map,
|
2014-04-28 08:22:25 +00:00
|
|
|
.set_ap_chanwidth = ieee80211_set_ap_chanwidth,
|
2014-10-07 07:38:50 +00:00
|
|
|
.add_tx_ts = ieee80211_add_tx_ts,
|
|
|
|
.del_tx_ts = ieee80211_del_tx_ts,
|
2016-09-20 14:31:14 +00:00
|
|
|
.start_nan = ieee80211_start_nan,
|
|
|
|
.stop_nan = ieee80211_stop_nan,
|
2016-09-20 14:31:19 +00:00
|
|
|
.nan_change_conf = ieee80211_nan_change_conf,
|
2016-09-20 14:31:20 +00:00
|
|
|
.add_nan_func = ieee80211_add_nan_func,
|
|
|
|
.del_nan_func = ieee80211_del_nan_func,
|
2016-11-22 10:52:18 +00:00
|
|
|
.set_multicast_to_unicast = ieee80211_set_multicast_to_unicast,
|
2018-03-26 17:52:50 +00:00
|
|
|
.tx_control_port = ieee80211_tx_control_port,
|
2018-05-08 11:03:50 +00:00
|
|
|
.get_txq_stats = ieee80211_get_txq_stats,
|
2018-10-04 03:19:20 +00:00
|
|
|
.get_ftm_responder_stats = ieee80211_get_ftm_responder_stats,
|
2018-10-16 09:24:47 +00:00
|
|
|
.start_pmsr = ieee80211_start_pmsr,
|
|
|
|
.abort_pmsr = ieee80211_abort_pmsr,
|
2019-04-11 20:47:26 +00:00
|
|
|
.probe_mesh_link = ieee80211_probe_mesh_link,
|
2020-01-20 07:51:27 +00:00
|
|
|
.set_tid_config = ieee80211_set_tid_config,
|
|
|
|
.reset_tid_config = ieee80211_reset_tid_config,
|
2007-05-05 18:45:53 +00:00
|
|
|
};
|