linux/init/do_mounts_rd.c

346 lines
8.1 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/minix_fs.h>
#include <linux/ext2_fs.h>
#include <linux/romfs_fs.h>
#include <uapi/linux/cramfs_fs.h>
#include <linux/initrd.h>
#include <linux/string.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include "do_mounts.h"
#include "../fs/squashfs/squashfs_fs.h"
#include <linux/decompress/generic.h>
int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
static int __init prompt_ramdisk(char *str)
{
rd_prompt = simple_strtol(str,NULL,0) & 1;
return 1;
}
__setup("prompt_ramdisk=", prompt_ramdisk);
int __initdata rd_image_start; /* starting block # of image */
static int __init ramdisk_start_setup(char *str)
{
rd_image_start = simple_strtol(str,NULL,0);
return 1;
}
__setup("ramdisk_start=", ramdisk_start_setup);
static int __init crd_load(int in_fd, int out_fd, decompress_fn deco);
/*
* This routine tries to find a RAM disk image to load, and returns the
* number of blocks to read for a non-compressed image, 0 if the image
* is a compressed image, and -1 if an image with the right magic
* numbers could not be found.
*
* We currently check for the following magic numbers:
* minix
* ext2
* romfs
* cramfs
* squashfs
* gzip
* bzip2
* lzma
* xz
* lzo
* lz4
*/
static int __init
identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
{
const int size = 512;
struct minix_super_block *minixsb;
struct romfs_super_block *romfsb;
struct cramfs_super *cramfsb;
struct squashfs_super_block *squashfsb;
int nblocks = -1;
unsigned char *buf;
const char *compress_name;
unsigned long n;
buf = kmalloc(size, GFP_KERNEL);
if (!buf)
return -ENOMEM;
minixsb = (struct minix_super_block *) buf;
romfsb = (struct romfs_super_block *) buf;
cramfsb = (struct cramfs_super *) buf;
squashfsb = (struct squashfs_super_block *) buf;
memset(buf, 0xe5, size);
/*
* Read block 0 to test for compressed kernel
*/
ksys_lseek(fd, start_block * BLOCK_SIZE, 0);
ksys_read(fd, buf, size);
*decompressor = decompress_method(buf, size, &compress_name);
if (compress_name) {
printk(KERN_NOTICE "RAMDISK: %s image found at block %d\n",
compress_name, start_block);
if (!*decompressor)
printk(KERN_EMERG
"RAMDISK: %s decompressor not configured!\n",
compress_name);
nblocks = 0;
goto done;
}
/* romfs is at block zero too */
if (romfsb->word0 == ROMSB_WORD0 &&
romfsb->word1 == ROMSB_WORD1) {
printk(KERN_NOTICE
"RAMDISK: romfs filesystem found at block %d\n",
start_block);
nblocks = (ntohl(romfsb->size)+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
goto done;
}
if (cramfsb->magic == CRAMFS_MAGIC) {
printk(KERN_NOTICE
"RAMDISK: cramfs filesystem found at block %d\n",
start_block);
nblocks = (cramfsb->size + BLOCK_SIZE - 1) >> BLOCK_SIZE_BITS;
goto done;
}
/* squashfs is at block zero too */
if (le32_to_cpu(squashfsb->s_magic) == SQUASHFS_MAGIC) {
printk(KERN_NOTICE
"RAMDISK: squashfs filesystem found at block %d\n",
start_block);
nblocks = (le64_to_cpu(squashfsb->bytes_used) + BLOCK_SIZE - 1)
>> BLOCK_SIZE_BITS;
goto done;
}
/*
* Read 512 bytes further to check if cramfs is padded
*/
ksys_lseek(fd, start_block * BLOCK_SIZE + 0x200, 0);
ksys_read(fd, buf, size);
if (cramfsb->magic == CRAMFS_MAGIC) {
printk(KERN_NOTICE
"RAMDISK: cramfs filesystem found at block %d\n",
start_block);
nblocks = (cramfsb->size + BLOCK_SIZE - 1) >> BLOCK_SIZE_BITS;
goto done;
}
/*
* Read block 1 to test for minix and ext2 superblock
*/
ksys_lseek(fd, (start_block+1) * BLOCK_SIZE, 0);
ksys_read(fd, buf, size);
/* Try minix */
if (minixsb->s_magic == MINIX_SUPER_MAGIC ||
minixsb->s_magic == MINIX_SUPER_MAGIC2) {
printk(KERN_NOTICE
"RAMDISK: Minix filesystem found at block %d\n",
start_block);
nblocks = minixsb->s_nzones << minixsb->s_log_zone_size;
goto done;
}
/* Try ext2 */
n = ext2_image_size(buf);
if (n) {
printk(KERN_NOTICE
"RAMDISK: ext2 filesystem found at block %d\n",
start_block);
nblocks = n;
goto done;
}
printk(KERN_NOTICE
"RAMDISK: Couldn't find valid RAM disk image starting at %d.\n",
start_block);
done:
ksys_lseek(fd, start_block * BLOCK_SIZE, 0);
kfree(buf);
return nblocks;
}
int __init rd_load_image(char *from)
{
int res = 0;
int in_fd, out_fd;
unsigned long rd_blocks, devblocks;
int nblocks, i, disk;
char *buf = NULL;
unsigned short rotate = 0;
decompress_fn decompressor = NULL;
#if !defined(CONFIG_S390)
char rotator[4] = { '|' , '/' , '-' , '\\' };
#endif
out_fd = ksys_open("/dev/ram", O_RDWR, 0);
if (out_fd < 0)
goto out;
in_fd = ksys_open(from, O_RDONLY, 0);
if (in_fd < 0)
goto noclose_input;
nblocks = identify_ramdisk_image(in_fd, rd_image_start, &decompressor);
if (nblocks < 0)
goto done;
if (nblocks == 0) {
if (crd_load(in_fd, out_fd, decompressor) == 0)
goto successful_load;
goto done;
}
/*
* NOTE NOTE: nblocks is not actually blocks but
* the number of kibibytes of data to load into a ramdisk.
*/
if (ksys_ioctl(out_fd, BLKGETSIZE, (unsigned long)&rd_blocks) < 0)
rd_blocks = 0;
else
rd_blocks >>= 1;
if (nblocks > rd_blocks) {
printk("RAMDISK: image too big! (%dKiB/%ldKiB)\n",
nblocks, rd_blocks);
goto done;
}
/*
* OK, time to copy in the data
*/
if (ksys_ioctl(in_fd, BLKGETSIZE, (unsigned long)&devblocks) < 0)
devblocks = 0;
else
devblocks >>= 1;
if (strcmp(from, "/initrd.image") == 0)
devblocks = nblocks;
if (devblocks == 0) {
printk(KERN_ERR "RAMDISK: could not determine device size\n");
goto done;
}
buf = kmalloc(BLOCK_SIZE, GFP_KERNEL);
if (!buf) {
printk(KERN_ERR "RAMDISK: could not allocate buffer\n");
goto done;
}
printk(KERN_NOTICE "RAMDISK: Loading %dKiB [%ld disk%s] into ram disk... ",
nblocks, ((nblocks-1)/devblocks)+1, nblocks>devblocks ? "s" : "");
for (i = 0, disk = 1; i < nblocks; i++) {
if (i && (i % devblocks == 0)) {
pr_cont("done disk #%d.\n", disk++);
rotate = 0;
if (ksys_close(in_fd)) {
printk("Error closing the disk.\n");
goto noclose_input;
}
change_floppy("disk #%d", disk);
in_fd = ksys_open(from, O_RDONLY, 0);
if (in_fd < 0) {
printk("Error opening disk.\n");
goto noclose_input;
}
printk("Loading disk #%d... ", disk);
}
ksys_read(in_fd, buf, BLOCK_SIZE);
ksys_write(out_fd, buf, BLOCK_SIZE);
#if !defined(CONFIG_S390)
if (!(i % 16)) {
pr_cont("%c\b", rotator[rotate & 0x3]);
rotate++;
}
#endif
}
pr_cont("done.\n");
successful_load:
res = 1;
done:
ksys_close(in_fd);
noclose_input:
ksys_close(out_fd);
out:
kfree(buf);
ksys_unlink("/dev/ram");
return res;
}
int __init rd_load_disk(int n)
{
if (rd_prompt)
change_floppy("root floppy disk to be loaded into RAM disk");
create_dev("/dev/root", ROOT_DEV);
create_dev("/dev/ram", MKDEV(RAMDISK_MAJOR, n));
return rd_load_image("/dev/root");
}
static int exit_code;
static int decompress_error;
static int crd_infd, crd_outfd;
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:23:14 +00:00
static long __init compr_fill(void *buf, unsigned long len)
{
long r = ksys_read(crd_infd, buf, len);
if (r < 0)
printk(KERN_ERR "RAMDISK: error while reading compressed data");
else if (r == 0)
printk(KERN_ERR "RAMDISK: EOF while reading compressed data");
return r;
}
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:23:14 +00:00
static long __init compr_flush(void *window, unsigned long outcnt)
{
long written = ksys_write(crd_outfd, window, outcnt);
if (written != outcnt) {
if (decompress_error == 0)
printk(KERN_ERR
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 21:23:14 +00:00
"RAMDISK: incomplete write (%ld != %ld)\n",
written, outcnt);
decompress_error = 1;
return -1;
}
return outcnt;
}
static void __init error(char *x)
{
printk(KERN_ERR "%s\n", x);
exit_code = 1;
decompress_error = 1;
}
static int __init crd_load(int in_fd, int out_fd, decompress_fn deco)
{
int result;
crd_infd = in_fd;
crd_outfd = out_fd;
if (!deco) {
pr_emerg("Invalid ramdisk decompression routine. "
"Select appropriate config option.\n");
panic("Could not decompress initial ramdisk image.");
}
result = deco(NULL, 0, compr_fill, compr_flush, NULL, NULL, error);
if (decompress_error)
result = 1;
return result;
}