linux/fs/proc_namespace.c

342 lines
7.9 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* fs/proc_namespace.c - handling of /proc/<pid>/{mounts,mountinfo,mountstats}
*
* In fact, that's a piece of procfs; it's *almost* isolated from
* the rest of fs/proc, but has rather close relationships with
* fs/namespace.c, thus here instead of fs/proc
*
*/
#include <linux/mnt_namespace.h>
#include <linux/nsproxy.h>
#include <linux/security.h>
#include <linux/fs_struct.h>
#include <linux/sched/task.h>
#include "proc/internal.h" /* only for get_proc_task() in ->open() */
#include "pnode.h"
#include "internal.h"
static __poll_t mounts_poll(struct file *file, poll_table *wait)
{
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
struct seq_file *m = file->private_data;
struct proc_mounts *p = m->private;
struct mnt_namespace *ns = p->ns;
__poll_t res = EPOLLIN | EPOLLRDNORM;
int event;
poll_wait(file, &p->ns->poll, wait);
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 21:07:29 +00:00
event = READ_ONCE(ns->event);
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
if (m->poll_event != event) {
m->poll_event = event;
res |= EPOLLERR | EPOLLPRI;
}
return res;
}
struct proc_fs_opts {
int flag;
const char *str;
};
static int show_sb_opts(struct seq_file *m, struct super_block *sb)
{
static const struct proc_fs_opts fs_opts[] = {
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 21:05:09 +00:00
{ SB_SYNCHRONOUS, ",sync" },
{ SB_DIRSYNC, ",dirsync" },
{ SB_MANDLOCK, ",mand" },
{ SB_LAZYTIME, ",lazytime" },
{ 0, NULL }
};
const struct proc_fs_opts *fs_infop;
for (fs_infop = fs_opts; fs_infop->flag; fs_infop++) {
if (sb->s_flags & fs_infop->flag)
seq_puts(m, fs_infop->str);
}
return security_sb_show_options(m, sb);
}
static void show_vfsmnt_opts(struct seq_file *m, struct vfsmount *mnt)
{
static const struct proc_fs_opts mnt_opts[] = {
{ MNT_NOSUID, ",nosuid" },
{ MNT_NODEV, ",nodev" },
{ MNT_NOEXEC, ",noexec" },
{ MNT_NOATIME, ",noatime" },
{ MNT_NODIRATIME, ",nodiratime" },
{ MNT_RELATIME, ",relatime" },
{ MNT_NOSYMFOLLOW, ",nosymfollow" },
{ 0, NULL }
};
const struct proc_fs_opts *fs_infop;
for (fs_infop = mnt_opts; fs_infop->flag; fs_infop++) {
if (mnt->mnt_flags & fs_infop->flag)
seq_puts(m, fs_infop->str);
}
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
if (is_idmapped_mnt(mnt))
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
seq_puts(m, ",idmapped");
}
static inline void mangle(struct seq_file *m, const char *s)
{
seq_escape(m, s, " \t\n\\#");
}
static void show_type(struct seq_file *m, struct super_block *sb)
{
mangle(m, sb->s_type->name);
if (sb->s_subtype) {
seq_putc(m, '.');
mangle(m, sb->s_subtype);
}
}
static int show_vfsmnt(struct seq_file *m, struct vfsmount *mnt)
{
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
struct proc_mounts *p = m->private;
struct mount *r = real_mount(mnt);
struct path mnt_path = { .dentry = mnt->mnt_root, .mnt = mnt };
struct super_block *sb = mnt_path.dentry->d_sb;
int err;
if (sb->s_op->show_devname) {
err = sb->s_op->show_devname(m, mnt_path.dentry);
if (err)
goto out;
} else {
mangle(m, r->mnt_devname ? r->mnt_devname : "none");
}
seq_putc(m, ' ');
/* mountpoints outside of chroot jail will give SEQ_SKIP on this */
err = seq_path_root(m, &mnt_path, &p->root, " \t\n\\");
if (err)
goto out;
seq_putc(m, ' ');
show_type(m, sb);
seq_puts(m, __mnt_is_readonly(mnt) ? " ro" : " rw");
err = show_sb_opts(m, sb);
if (err)
goto out;
show_vfsmnt_opts(m, mnt);
if (sb->s_op->show_options)
err = sb->s_op->show_options(m, mnt_path.dentry);
seq_puts(m, " 0 0\n");
out:
return err;
}
static int show_mountinfo(struct seq_file *m, struct vfsmount *mnt)
{
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
struct proc_mounts *p = m->private;
struct mount *r = real_mount(mnt);
struct super_block *sb = mnt->mnt_sb;
struct path mnt_path = { .dentry = mnt->mnt_root, .mnt = mnt };
int err;
seq_printf(m, "%i %i %u:%u ", r->mnt_id, r->mnt_parent->mnt_id,
MAJOR(sb->s_dev), MINOR(sb->s_dev));
err = show_path(m, mnt->mnt_root);
if (err)
goto out;
seq_putc(m, ' ');
/* mountpoints outside of chroot jail will give SEQ_SKIP on this */
err = seq_path_root(m, &mnt_path, &p->root, " \t\n\\");
if (err)
goto out;
seq_puts(m, mnt->mnt_flags & MNT_READONLY ? " ro" : " rw");
show_vfsmnt_opts(m, mnt);
/* Tagged fields ("foo:X" or "bar") */
if (IS_MNT_SHARED(r))
seq_printf(m, " shared:%i", r->mnt_group_id);
if (IS_MNT_SLAVE(r)) {
int master = r->mnt_master->mnt_group_id;
int dom = get_dominating_id(r, &p->root);
seq_printf(m, " master:%i", master);
if (dom && dom != master)
seq_printf(m, " propagate_from:%i", dom);
}
if (IS_MNT_UNBINDABLE(r))
seq_puts(m, " unbindable");
/* Filesystem specific data */
seq_puts(m, " - ");
show_type(m, sb);
seq_putc(m, ' ');
if (sb->s_op->show_devname) {
err = sb->s_op->show_devname(m, mnt->mnt_root);
if (err)
goto out;
} else {
mangle(m, r->mnt_devname ? r->mnt_devname : "none");
}
seq_puts(m, sb_rdonly(sb) ? " ro" : " rw");
err = show_sb_opts(m, sb);
if (err)
goto out;
if (sb->s_op->show_options)
err = sb->s_op->show_options(m, mnt->mnt_root);
seq_putc(m, '\n');
out:
return err;
}
static int show_vfsstat(struct seq_file *m, struct vfsmount *mnt)
{
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
struct proc_mounts *p = m->private;
struct mount *r = real_mount(mnt);
struct path mnt_path = { .dentry = mnt->mnt_root, .mnt = mnt };
struct super_block *sb = mnt_path.dentry->d_sb;
int err;
/* device */
if (sb->s_op->show_devname) {
seq_puts(m, "device ");
err = sb->s_op->show_devname(m, mnt_path.dentry);
if (err)
goto out;
} else {
if (r->mnt_devname) {
seq_puts(m, "device ");
mangle(m, r->mnt_devname);
} else
seq_puts(m, "no device");
}
/* mount point */
seq_puts(m, " mounted on ");
/* mountpoints outside of chroot jail will give SEQ_SKIP on this */
err = seq_path_root(m, &mnt_path, &p->root, " \t\n\\");
if (err)
goto out;
seq_putc(m, ' ');
/* file system type */
seq_puts(m, "with fstype ");
show_type(m, sb);
/* optional statistics */
if (sb->s_op->show_stats) {
seq_putc(m, ' ');
err = sb->s_op->show_stats(m, mnt_path.dentry);
}
seq_putc(m, '\n');
out:
return err;
}
static int mounts_open_common(struct inode *inode, struct file *file,
int (*show)(struct seq_file *, struct vfsmount *))
{
struct task_struct *task = get_proc_task(inode);
struct nsproxy *nsp;
struct mnt_namespace *ns = NULL;
struct path root;
struct proc_mounts *p;
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
struct seq_file *m;
int ret = -EINVAL;
if (!task)
goto err;
task_lock(task);
nsp = task->nsproxy;
if (!nsp || !nsp->mnt_ns) {
task_unlock(task);
put_task_struct(task);
goto err;
}
ns = nsp->mnt_ns;
get_mnt_ns(ns);
if (!task->fs) {
task_unlock(task);
put_task_struct(task);
ret = -ENOENT;
goto err_put_ns;
}
get_fs_root(task->fs, &root);
task_unlock(task);
put_task_struct(task);
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
ret = seq_open_private(file, &mounts_op, sizeof(struct proc_mounts));
if (ret)
goto err_put_path;
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
m = file->private_data;
m->poll_event = ns->event;
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
p = m->private;
p->ns = ns;
p->root = root;
p->show = show;
return 0;
err_put_path:
path_put(&root);
err_put_ns:
put_mnt_ns(ns);
err:
return ret;
}
static int mounts_release(struct inode *inode, struct file *file)
{
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
struct seq_file *m = file->private_data;
struct proc_mounts *p = m->private;
path_put(&p->root);
put_mnt_ns(p->ns);
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
return seq_release_private(inode, file);
}
static int mounts_open(struct inode *inode, struct file *file)
{
return mounts_open_common(inode, file, show_vfsmnt);
}
static int mountinfo_open(struct inode *inode, struct file *file)
{
return mounts_open_common(inode, file, show_mountinfo);
}
static int mountstats_open(struct inode *inode, struct file *file)
{
return mounts_open_common(inode, file, show_vfsstat);
}
const struct file_operations proc_mounts_operations = {
.open = mounts_open,
.read_iter = seq_read_iter,
.splice_read = copy_splice_read,
.llseek = seq_lseek,
.release = mounts_release,
.poll = mounts_poll,
};
const struct file_operations proc_mountinfo_operations = {
.open = mountinfo_open,
.read_iter = seq_read_iter,
.splice_read = copy_splice_read,
.llseek = seq_lseek,
.release = mounts_release,
.poll = mounts_poll,
};
const struct file_operations proc_mountstats_operations = {
.open = mountstats_open,
.read_iter = seq_read_iter,
.splice_read = copy_splice_read,
.llseek = seq_lseek,
.release = mounts_release,
};