linux/mm/memblock.c

2082 lines
58 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Procedures for maintaining information about logical memory blocks.
*
* Peter Bergner, IBM Corp. June 2001.
* Copyright (C) 2001 Peter Bergner.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/poison.h>
#include <linux/pfn.h>
#include <linux/debugfs.h>
headers: untangle kmemleak.h from mm.h Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05 23:25:34 +00:00
#include <linux/kmemleak.h>
#include <linux/seq_file.h>
#include <linux/memblock.h>
#include <asm/sections.h>
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
#include <linux/io.h>
#include "internal.h"
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table In the irqchip and EFI code, we have what basically amounts to a quirk to work around a peculiarity in the GICv3 architecture, which permits the system memory address of LPI tables to be programmable only once after a CPU reset. This means kexec kernels must use the same memory as the first kernel, and thus ensure that this memory has not been given out for other purposes by the time the ITS init code runs, which is not very early for secondary CPUs. On systems with many CPUs, these reservations could overflow the memblock reservation table, and this was addressed in commit: eff896288872 ("efi/arm: Defer persistent reservations until after paging_init()") However, this turns out to have made things worse, since the allocation of page tables and heap space for the resized memblock reservation table itself may overwrite the regions we are attempting to reserve, which may cause all kinds of corruption, also considering that the ITS will still be poking bits into that memory in response to incoming MSIs. So instead, let's grow the static memblock reservation table on such systems so it can accommodate these reservations at an earlier time. This will permit us to revert the above commit in a subsequent patch. [ mingo: Minor cleanups. ] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190215123333.21209-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-15 12:33:32 +00:00
#define INIT_MEMBLOCK_REGIONS 128
#define INIT_PHYSMEM_REGIONS 4
#ifndef INIT_MEMBLOCK_RESERVED_REGIONS
# define INIT_MEMBLOCK_RESERVED_REGIONS INIT_MEMBLOCK_REGIONS
#endif
/**
* DOC: memblock overview
*
* Memblock is a method of managing memory regions during the early
* boot period when the usual kernel memory allocators are not up and
* running.
*
* Memblock views the system memory as collections of contiguous
* regions. There are several types of these collections:
*
* * ``memory`` - describes the physical memory available to the
* kernel; this may differ from the actual physical memory installed
* in the system, for instance when the memory is restricted with
* ``mem=`` command line parameter
* * ``reserved`` - describes the regions that were allocated
mm/memblock: expose only miminal interface to add/walk physmem "physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-01 14:18:29 +00:00
* * ``physmem`` - describes the actual physical memory available during
* boot regardless of the possible restrictions and memory hot(un)plug;
* the ``physmem`` type is only available on some architectures.
*
* Each region is represented by :c:type:`struct memblock_region` that
* defines the region extents, its attributes and NUMA node id on NUMA
* systems. Every memory type is described by the :c:type:`struct
* memblock_type` which contains an array of memory regions along with
mm/memblock: expose only miminal interface to add/walk physmem "physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-01 14:18:29 +00:00
* the allocator metadata. The "memory" and "reserved" types are nicely
* wrapped with :c:type:`struct memblock`. This structure is statically
* initialized at build time. The region arrays are initially sized to
* %INIT_MEMBLOCK_REGIONS for "memory" and %INIT_MEMBLOCK_RESERVED_REGIONS
* for "reserved". The region array for "physmem" is initially sized to
* %INIT_PHYSMEM_REGIONS.
* The memblock_allow_resize() enables automatic resizing of the region
* arrays during addition of new regions. This feature should be used
* with care so that memory allocated for the region array will not
* overlap with areas that should be reserved, for example initrd.
*
* The early architecture setup should tell memblock what the physical
* memory layout is by using memblock_add() or memblock_add_node()
* functions. The first function does not assign the region to a NUMA
* node and it is appropriate for UMA systems. Yet, it is possible to
* use it on NUMA systems as well and assign the region to a NUMA node
* later in the setup process using memblock_set_node(). The
* memblock_add_node() performs such an assignment directly.
*
* Once memblock is setup the memory can be allocated using one of the
* API variants:
*
* * memblock_phys_alloc*() - these functions return the **physical**
* address of the allocated memory
* * memblock_alloc*() - these functions return the **virtual** address
* of the allocated memory.
*
* Note, that both API variants use implicit assumptions about allowed
* memory ranges and the fallback methods. Consult the documentation
* of memblock_alloc_internal() and memblock_alloc_range_nid()
* functions for more elaborate description.
*
* As the system boot progresses, the architecture specific mem_init()
* function frees all the memory to the buddy page allocator.
*
* Unless an architecture enables %CONFIG_ARCH_KEEP_MEMBLOCK, the
mm/memblock: expose only miminal interface to add/walk physmem "physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-01 14:18:29 +00:00
* memblock data structures (except "physmem") will be discarded after the
* system initialization completes.
*/
mm: remove nobootmem Move a few remaining functions from nobootmem.c to memblock.c and remove nobootmem Link: http://lkml.kernel.org/r/1536927045-23536-28-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:40 +00:00
#ifndef CONFIG_NEED_MULTIPLE_NODES
struct pglist_data __refdata contig_page_data;
EXPORT_SYMBOL(contig_page_data);
#endif
unsigned long max_low_pfn;
unsigned long min_low_pfn;
unsigned long max_pfn;
unsigned long long max_possible_pfn;
static struct memblock_region memblock_memory_init_regions[INIT_MEMBLOCK_REGIONS] __initdata_memblock;
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table In the irqchip and EFI code, we have what basically amounts to a quirk to work around a peculiarity in the GICv3 architecture, which permits the system memory address of LPI tables to be programmable only once after a CPU reset. This means kexec kernels must use the same memory as the first kernel, and thus ensure that this memory has not been given out for other purposes by the time the ITS init code runs, which is not very early for secondary CPUs. On systems with many CPUs, these reservations could overflow the memblock reservation table, and this was addressed in commit: eff896288872 ("efi/arm: Defer persistent reservations until after paging_init()") However, this turns out to have made things worse, since the allocation of page tables and heap space for the resized memblock reservation table itself may overwrite the regions we are attempting to reserve, which may cause all kinds of corruption, also considering that the ITS will still be poking bits into that memory in response to incoming MSIs. So instead, let's grow the static memblock reservation table on such systems so it can accommodate these reservations at an earlier time. This will permit us to revert the above commit in a subsequent patch. [ mingo: Minor cleanups. ] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190215123333.21209-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-15 12:33:32 +00:00
static struct memblock_region memblock_reserved_init_regions[INIT_MEMBLOCK_RESERVED_REGIONS] __initdata_memblock;
#ifdef CONFIG_HAVE_MEMBLOCK_PHYS_MAP
mm/memblock: expose only miminal interface to add/walk physmem "physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-01 14:18:29 +00:00
static struct memblock_region memblock_physmem_init_regions[INIT_PHYSMEM_REGIONS];
#endif
struct memblock memblock __initdata_memblock = {
.memory.regions = memblock_memory_init_regions,
.memory.cnt = 1, /* empty dummy entry */
.memory.max = INIT_MEMBLOCK_REGIONS,
.memory.name = "memory",
.reserved.regions = memblock_reserved_init_regions,
.reserved.cnt = 1, /* empty dummy entry */
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table In the irqchip and EFI code, we have what basically amounts to a quirk to work around a peculiarity in the GICv3 architecture, which permits the system memory address of LPI tables to be programmable only once after a CPU reset. This means kexec kernels must use the same memory as the first kernel, and thus ensure that this memory has not been given out for other purposes by the time the ITS init code runs, which is not very early for secondary CPUs. On systems with many CPUs, these reservations could overflow the memblock reservation table, and this was addressed in commit: eff896288872 ("efi/arm: Defer persistent reservations until after paging_init()") However, this turns out to have made things worse, since the allocation of page tables and heap space for the resized memblock reservation table itself may overwrite the regions we are attempting to reserve, which may cause all kinds of corruption, also considering that the ITS will still be poking bits into that memory in response to incoming MSIs. So instead, let's grow the static memblock reservation table on such systems so it can accommodate these reservations at an earlier time. This will permit us to revert the above commit in a subsequent patch. [ mingo: Minor cleanups. ] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190215123333.21209-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-15 12:33:32 +00:00
.reserved.max = INIT_MEMBLOCK_RESERVED_REGIONS,
.reserved.name = "reserved",
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
.bottom_up = false,
.current_limit = MEMBLOCK_ALLOC_ANYWHERE,
};
mm/memblock: expose only miminal interface to add/walk physmem "physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-01 14:18:29 +00:00
#ifdef CONFIG_HAVE_MEMBLOCK_PHYS_MAP
struct memblock_type physmem = {
.regions = memblock_physmem_init_regions,
.cnt = 1, /* empty dummy entry */
.max = INIT_PHYSMEM_REGIONS,
.name = "physmem",
};
#endif
memblock: make for_each_memblock_type() iterator private for_each_memblock_type() is not used outside mm/memblock.c, move it there from include/linux/memblock.h Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 23:57:49 +00:00
#define for_each_memblock_type(i, memblock_type, rgn) \
for (i = 0, rgn = &memblock_type->regions[0]; \
i < memblock_type->cnt; \
i++, rgn = &memblock_type->regions[i])
int memblock_debug __initdata_memblock;
static bool system_has_some_mirror __initdata_memblock = false;
memblock: s/memblock_analyze()/memblock_allow_resize()/ and update users The only function of memblock_analyze() is now allowing resize of memblock region arrays. Rename it to memblock_allow_resize() and update its users. * The following users remain the same other than renaming. arm/mm/init.c::arm_memblock_init() microblaze/kernel/prom.c::early_init_devtree() powerpc/kernel/prom.c::early_init_devtree() openrisc/kernel/prom.c::early_init_devtree() sh/mm/init.c::paging_init() sparc/mm/init_64.c::paging_init() unicore32/mm/init.c::uc32_memblock_init() * In the following users, analyze was used to update total size which is no longer necessary. powerpc/kernel/machine_kexec.c::reserve_crashkernel() powerpc/kernel/prom.c::early_init_devtree() powerpc/mm/init_32.c::MMU_init() powerpc/mm/tlb_nohash.c::__early_init_mmu() powerpc/platforms/ps3/mm.c::ps3_mm_add_memory() powerpc/platforms/embedded6xx/wii.c::wii_memory_fixups() sh/kernel/machine_kexec.c::reserve_crashkernel() * x86/kernel/e820.c::memblock_x86_fill() was directly setting memblock_can_resize before populating memblock and calling analyze afterwards. Call memblock_allow_resize() before start populating. memblock_can_resize is now static inside memblock.c. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-12-08 18:22:08 +00:00
static int memblock_can_resize __initdata_memblock;
static int memblock_memory_in_slab __initdata_memblock = 0;
static int memblock_reserved_in_slab __initdata_memblock = 0;
memblock: make memblock_find_in_range_node() and choose_memblock_flags() static These functions are not used outside memblock. Make them static. Link: http://lkml.kernel.org/r/1548057848-15136-12-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:46 +00:00
static enum memblock_flags __init_memblock choose_memblock_flags(void)
{
return system_has_some_mirror ? MEMBLOCK_MIRROR : MEMBLOCK_NONE;
}
/* adjust *@size so that (@base + *@size) doesn't overflow, return new size */
static inline phys_addr_t memblock_cap_size(phys_addr_t base, phys_addr_t *size)
{
return *size = min(*size, PHYS_ADDR_MAX - base);
}
/*
* Address comparison utilities
*/
static unsigned long __init_memblock memblock_addrs_overlap(phys_addr_t base1, phys_addr_t size1,
phys_addr_t base2, phys_addr_t size2)
{
return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
}
mem-hotplug: handle node hole when initializing numa_meminfo. When parsing SRAT, all memory ranges are added into numa_meminfo. In numa_init(), before entering numa_cleanup_meminfo(), all possible memory ranges are in numa_meminfo. And numa_cleanup_meminfo() removes all ranges over max_pfn or empty. But, this only works if the nodes are continuous. Let's have a look at the following example: We have an SRAT like this: SRAT: Node 0 PXM 0 [mem 0x00000000-0x5fffffff] SRAT: Node 0 PXM 0 [mem 0x100000000-0x1ffffffffff] SRAT: Node 1 PXM 1 [mem 0x20000000000-0x3ffffffffff] SRAT: Node 4 PXM 2 [mem 0x40000000000-0x5ffffffffff] hotplug SRAT: Node 5 PXM 3 [mem 0x60000000000-0x7ffffffffff] hotplug SRAT: Node 2 PXM 4 [mem 0x80000000000-0x9ffffffffff] hotplug SRAT: Node 3 PXM 5 [mem 0xa0000000000-0xbffffffffff] hotplug SRAT: Node 6 PXM 6 [mem 0xc0000000000-0xdffffffffff] hotplug SRAT: Node 7 PXM 7 [mem 0xe0000000000-0xfffffffffff] hotplug On boot, only node 0,1,2,3 exist. And the numa_meminfo will look like this: numa_meminfo.nr_blks = 9 1. on node 0: [0, 60000000] 2. on node 0: [100000000, 20000000000] 3. on node 1: [20000000000, 40000000000] 4. on node 4: [40000000000, 60000000000] 5. on node 5: [60000000000, 80000000000] 6. on node 2: [80000000000, a0000000000] 7. on node 3: [a0000000000, a0800000000] 8. on node 6: [c0000000000, a0800000000] 9. on node 7: [e0000000000, a0800000000] And numa_cleanup_meminfo() will merge 1 and 2, and remove 8,9 because the end address is over max_pfn, which is a0800000000. But 4 and 5 are not removed because their end addresses are less then max_pfn. But in fact, node 4 and 5 don't exist. In a word, numa_cleanup_meminfo() is not able to handle holes between nodes. Since memory ranges in node 4 and 5 are in numa_meminfo, in numa_register_memblks(), node 4 and 5 will be mistakenly set to online. If you run lscpu, it will show: NUMA node0 CPU(s): 0-14,128-142 NUMA node1 CPU(s): 15-29,143-157 NUMA node2 CPU(s): NUMA node3 CPU(s): NUMA node4 CPU(s): 62-76,190-204 NUMA node5 CPU(s): 78-92,206-220 In this patch, we use memblock_overlaps_region() to check if ranges in numa_meminfo overlap with ranges in memory_block. Since memory_block contains all available memory at boot time, if they overlap, it means the ranges exist. If not, then remove them from numa_meminfo. After this patch, lscpu will show: NUMA node0 CPU(s): 0-14,128-142 NUMA node1 CPU(s): 15-29,143-157 NUMA node4 CPU(s): 62-76,190-204 NUMA node5 CPU(s): 78-92,206-220 Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tejun Heo <tj@kernel.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 22:02:03 +00:00
bool __init_memblock memblock_overlaps_region(struct memblock_type *type,
phys_addr_t base, phys_addr_t size)
{
unsigned long i;
for (i = 0; i < type->cnt; i++)
if (memblock_addrs_overlap(base, size, type->regions[i].base,
type->regions[i].size))
break;
return i < type->cnt;
}
/**
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
* __memblock_find_range_bottom_up - find free area utility in bottom-up
* @start: start of candidate range
* @end: end of candidate range, can be %MEMBLOCK_ALLOC_ANYWHERE or
* %MEMBLOCK_ALLOC_ACCESSIBLE
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
* @size: size of free area to find
* @align: alignment of free area to find
* @nid: nid of the free area to find, %NUMA_NO_NODE for any node
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
* @flags: pick from blocks based on memory attributes
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
*
* Utility called from memblock_find_in_range_node(), find free area bottom-up.
*
* Return:
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
* Found address on success, 0 on failure.
*/
static phys_addr_t __init_memblock
__memblock_find_range_bottom_up(phys_addr_t start, phys_addr_t end,
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
phys_addr_t size, phys_addr_t align, int nid,
enum memblock_flags flags)
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
{
phys_addr_t this_start, this_end, cand;
u64 i;
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
for_each_free_mem_range(i, nid, flags, &this_start, &this_end, NULL) {
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
this_start = clamp(this_start, start, end);
this_end = clamp(this_end, start, end);
cand = round_up(this_start, align);
if (cand < this_end && this_end - cand >= size)
return cand;
}
return 0;
}
/**
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
* __memblock_find_range_top_down - find free area utility, in top-down
* @start: start of candidate range
* @end: end of candidate range, can be %MEMBLOCK_ALLOC_ANYWHERE or
* %MEMBLOCK_ALLOC_ACCESSIBLE
* @size: size of free area to find
* @align: alignment of free area to find
* @nid: nid of the free area to find, %NUMA_NO_NODE for any node
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
* @flags: pick from blocks based on memory attributes
*
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
* Utility called from memblock_find_in_range_node(), find free area top-down.
*
* Return:
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
* Found address on success, 0 on failure.
*/
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
static phys_addr_t __init_memblock
__memblock_find_range_top_down(phys_addr_t start, phys_addr_t end,
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
phys_addr_t size, phys_addr_t align, int nid,
enum memblock_flags flags)
{
phys_addr_t this_start, this_end, cand;
u64 i;
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
for_each_free_mem_range_reverse(i, nid, flags, &this_start, &this_end,
NULL) {
this_start = clamp(this_start, start, end);
this_end = clamp(this_end, start, end);
if (this_end < size)
continue;
cand = round_down(this_end - size, align);
if (cand >= this_start)
return cand;
}
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
return 0;
}
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
/**
* memblock_find_in_range_node - find free area in given range and node
* @size: size of free area to find
* @align: alignment of free area to find
* @start: start of candidate range
* @end: end of candidate range, can be %MEMBLOCK_ALLOC_ANYWHERE or
* %MEMBLOCK_ALLOC_ACCESSIBLE
* @nid: nid of the free area to find, %NUMA_NO_NODE for any node
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
* @flags: pick from blocks based on memory attributes
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
*
* Find @size free area aligned to @align in the specified range and node.
*
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
* When allocation direction is bottom-up, the @start should be greater
* than the end of the kernel image. Otherwise, it will be trimmed. The
* reason is that we want the bottom-up allocation just near the kernel
* image so it is highly likely that the allocated memory and the kernel
* will reside in the same node.
*
* If bottom-up allocation failed, will try to allocate memory top-down.
*
* Return:
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
* Found address on success, 0 on failure.
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
*/
memblock: make memblock_find_in_range_node() and choose_memblock_flags() static These functions are not used outside memblock. Make them static. Link: http://lkml.kernel.org/r/1548057848-15136-12-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:46 +00:00
static phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t size,
phys_addr_t align, phys_addr_t start,
phys_addr_t end, int nid,
enum memblock_flags flags)
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
{
phys_addr_t kernel_end, ret;
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
/* pump up @end */
mm/memblock.c: skip kmemleak for kasan_init() Kmemleak does not play well with KASAN (tested on both HPE Apollo 70 and Huawei TaiShan 2280 aarch64 servers). After calling start_kernel()->setup_arch()->kasan_init(), kmemleak early log buffer went from something like 280 to 260000 which caused kmemleak disabled and crash dump memory reservation failed. The multitude of kmemleak_alloc() calls is from nested loops while KASAN is setting up full memory mappings, so let early kmemleak allocations skip those memblock_alloc_internal() calls came from kasan_init() given that those early KASAN memory mappings should not reference to other memory. Hence, no kmemleak false positives. kasan_init kasan_map_populate [1] kasan_pgd_populate [2] kasan_pud_populate [3] kasan_pmd_populate [4] kasan_pte_populate [5] kasan_alloc_zeroed_page memblock_alloc_try_nid memblock_alloc_internal kmemleak_alloc [1] for_each_memblock(memory, reg) [2] while (pgdp++, addr = next, addr != end) [3] while (pudp++, addr = next, addr != end && pud_none(READ_ONCE(*pudp))) [4] while (pmdp++, addr = next, addr != end && pmd_none(READ_ONCE(*pmdp))) [5] while (ptep++, addr = next, addr != end && pte_none(READ_ONCE(*ptep))) Link: http://lkml.kernel.org/r/1543442925-17794-1-git-send-email-cai@gmx.us Signed-off-by: Qian Cai <cai@gmx.us> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 08:36:29 +00:00
if (end == MEMBLOCK_ALLOC_ACCESSIBLE ||
end == MEMBLOCK_ALLOC_KASAN)
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
end = memblock.current_limit;
/* avoid allocating the first page */
start = max_t(phys_addr_t, start, PAGE_SIZE);
end = max(start, end);
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
kernel_end = __pa_symbol(_end);
/*
* try bottom-up allocation only when bottom-up mode
* is set and @end is above the kernel image.
*/
if (memblock_bottom_up() && end > kernel_end) {
phys_addr_t bottom_up_start;
/* make sure we will allocate above the kernel */
bottom_up_start = max(start, kernel_end);
/* ok, try bottom-up allocation first */
ret = __memblock_find_range_bottom_up(bottom_up_start, end,
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
size, align, nid, flags);
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
if (ret)
return ret;
/*
* we always limit bottom-up allocation above the kernel,
* but top-down allocation doesn't have the limit, so
* retrying top-down allocation may succeed when bottom-up
* allocation failed.
*
* bottom-up allocation is expected to be fail very rarely,
* so we use WARN_ONCE() here to see the stack trace if
* fail happens.
*/
mm/memblock.c: do not complain about top-down allocations for !MEMORY_HOTREMOVE Mike Rapoport is converting architectures from bootmem to nobootmem allocator. While doing so for m68k Geert has noticed that he gets a scary looking warning: WARNING: CPU: 0 PID: 0 at mm/memblock.c:230 memblock_find_in_range_node+0x11c/0x1be memblock: bottom-up allocation failed, memory hotunplug may be affected Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.18.0-rc3-atari-01343-gf2fb5f2e09a97a3c-dirty #7 Call Trace: __warn+0xa8/0xc2 kernel_pg_dir+0x0/0x1000 netdev_lower_get_next+0x2/0x22 warn_slowpath_fmt+0x2e/0x36 memblock_find_in_range_node+0x11c/0x1be memblock_find_in_range_node+0x11c/0x1be memblock_find_in_range_node+0x0/0x1be vprintk_func+0x66/0x6e memblock_virt_alloc_internal+0xd0/0x156 netdev_lower_get_next+0x2/0x22 netdev_lower_get_next+0x2/0x22 kernel_pg_dir+0x0/0x1000 memblock_virt_alloc_try_nid_nopanic+0x58/0x7a netdev_lower_get_next+0x2/0x22 kernel_pg_dir+0x0/0x1000 kernel_pg_dir+0x0/0x1000 EXPTBL+0x234/0x400 EXPTBL+0x234/0x400 alloc_node_mem_map+0x4a/0x66 netdev_lower_get_next+0x2/0x22 free_area_init_node+0xe2/0x29e EXPTBL+0x234/0x400 paging_init+0x430/0x462 kernel_pg_dir+0x0/0x1000 printk+0x0/0x1a EXPTBL+0x234/0x400 setup_arch+0x1b8/0x22c start_kernel+0x4a/0x40a _sinittext+0x344/0x9e8 The warning is basically saying that a top-down allocation can break memory hotremove because memblock allocation is not movable. But m68k doesn't even support MEMORY_HOTREMOVE so there is no point to warn about it. Make the warning conditional only to configurations that care. Link: http://lkml.kernel.org/r/20180706061750.GH32658@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Sam Creasey <sammy@sammy.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-13 23:59:16 +00:00
WARN_ONCE(IS_ENABLED(CONFIG_MEMORY_HOTREMOVE),
"memblock: bottom-up allocation failed, memory hotremove may be affected\n");
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
}
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
return __memblock_find_range_top_down(start, end, size, align, nid,
flags);
mm/memblock.c: factor out of top-down allocation [Problem] The current Linux cannot migrate pages used by the kernel because of the kernel direct mapping. In Linux kernel space, va = pa + PAGE_OFFSET. When the pa is changed, we cannot simply update the pagetable and keep the va unmodified. So the kernel pages are not migratable. There are also some other issues will cause the kernel pages not migratable. For example, the physical address may be cached somewhere and will be used. It is not to update all the caches. When doing memory hotplug in Linux, we first migrate all the pages in one memory device somewhere else, and then remove the device. But if pages are used by the kernel, they are not migratable. As a result, memory used by the kernel cannot be hot-removed. Modifying the kernel direct mapping mechanism is too difficult to do. And it may cause the kernel performance down and unstable. So we use the following way to do memory hotplug. [What we are doing] In Linux, memory in one numa node is divided into several zones. One of the zones is ZONE_MOVABLE, which the kernel won't use. In order to implement memory hotplug in Linux, we are going to arrange all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these memory. To do this, we need ACPI's help. In ACPI, SRAT(System Resource Affinity Table) contains NUMA info. The memory affinities in SRAT record every memory range in the system, and also, flags specifying if the memory range is hotpluggable. (Please refer to ACPI spec 5.0 5.2.16) With the help of SRAT, we have to do the following two things to achieve our goal: 1. When doing memory hot-add, allow the users arranging hotpluggable as ZONE_MOVABLE. (This has been done by the MOVABLE_NODE functionality in Linux.) 2. when the system is booting, prevent bootmem allocator from allocating hotpluggable memory for the kernel before the memory initialization finishes. The problem 2 is the key problem we are going to solve. But before solving it, we need some preparation. Please see below. [Preparation] Bootloader has to load the kernel image into memory. And this memory must be unhotpluggable. We cannot prevent this anyway. So in a memory hotplug system, we can assume any node the kernel resides in is not hotpluggable. Before SRAT is parsed, we don't know which memory ranges are hotpluggable. But memblock has already started to work. In the current kernel, memblock allocates the following memory before SRAT is parsed: setup_arch() |->memblock_x86_fill() /* memblock is ready */ |...... |->early_reserve_e820_mpc_new() /* allocate memory under 1MB */ |->reserve_real_mode() /* allocate memory under 1MB */ |->init_mem_mapping() /* allocate page tables, about 2MB to map 1GB memory */ |->dma_contiguous_reserve() /* specified by user, should be low */ |->setup_log_buf() /* specified by user, several mega bytes */ |->relocate_initrd() /* could be large, but will be freed after boot, should reorder */ |->acpi_initrd_override() /* several mega bytes */ |->reserve_crashkernel() /* could be large, should reorder */ |...... |->initmem_init() /* Parse SRAT */ According to Tejun's advice, before SRAT is parsed, we should try our best to allocate memory near the kernel image. Since the whole node the kernel resides in won't be hotpluggable, and for a modern server, a node may have at least 16GB memory, allocating several mega bytes memory around the kernel image won't cross to hotpluggable memory. [About this patchset] So this patchset is the preparation for the problem 2 that we want to solve. It does the following: 1. Make memblock be able to allocate memory bottom up. 1) Keep all the memblock APIs' prototype unmodified. 2) When the direction is bottom up, keep the start address greater than the end of kernel image. 2. Improve init_mem_mapping() to support allocate page tables in bottom up direction. 3. Introduce "movable_node" boot option to enable and disable this functionality. This patch (of 6): Create a new function __memblock_find_range_top_down to factor out of top-down allocation from memblock_find_in_range_node. This is a preparation because we will introduce a new bottom-up allocation mode in the following patch. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:57 +00:00
}
/**
* memblock_find_in_range - find free area in given range
* @start: start of candidate range
* @end: end of candidate range, can be %MEMBLOCK_ALLOC_ANYWHERE or
* %MEMBLOCK_ALLOC_ACCESSIBLE
* @size: size of free area to find
* @align: alignment of free area to find
*
* Find @size free area aligned to @align in the specified range.
*
* Return:
mm/memblock.c: introduce bottom-up allocation mode The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. So the basic idea is: Allocate memory from the end of the kernel image and to the higher memory. Since memory allocation before SRAT is parsed won't be too much, it could highly likely be in the same node with kernel image. The current memblock can only allocate memory top-down. So this patch introduces a new bottom-up allocation mode to allocate memory bottom-up. And later when we use this allocation direction to allocate memory, we will limit the start address above the kernel. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12 23:07:59 +00:00
* Found address on success, 0 on failure.
*/
phys_addr_t __init_memblock memblock_find_in_range(phys_addr_t start,
phys_addr_t end, phys_addr_t size,
phys_addr_t align)
{
phys_addr_t ret;
enum memblock_flags flags = choose_memblock_flags();
again:
ret = memblock_find_in_range_node(size, align, start, end,
NUMA_NO_NODE, flags);
if (!ret && (flags & MEMBLOCK_MIRROR)) {
pr_warn("Could not allocate %pap bytes of mirrored memory\n",
&size);
flags &= ~MEMBLOCK_MIRROR;
goto again;
}
return ret;
}
static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r)
{
type->total_size -= type->regions[r].size;
memmove(&type->regions[r], &type->regions[r + 1],
(type->cnt - (r + 1)) * sizeof(type->regions[r]));
type->cnt--;
/* Special case for empty arrays */
if (type->cnt == 0) {
WARN_ON(type->total_size != 0);
type->cnt = 1;
type->regions[0].base = 0;
type->regions[0].size = 0;
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
type->regions[0].flags = 0;
memblock_set_region_node(&type->regions[0], MAX_NUMNODES);
}
}
mm: memblock: make keeping memblock memory opt-in rather than opt-out Most architectures do not need the memblock memory after the page allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the arch Kconfig. Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the logic makes it clear which architectures actually use memblock after system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK to the architectures that are still missing that option. Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:22:59 +00:00
#ifndef CONFIG_ARCH_KEEP_MEMBLOCK
mm: discard memblock data later There is existing use after free bug when deferred struct pages are enabled: The memblock_add() allocates memory for the memory array if more than 128 entries are needed. See comment in e820__memblock_setup(): * The bootstrap memblock region count maximum is 128 entries * (INIT_MEMBLOCK_REGIONS), but EFI might pass us more E820 entries * than that - so allow memblock resizing. This memblock memory is freed here: free_low_memory_core_early() We access the freed memblock.memory later in boot when deferred pages are initialized in this path: deferred_init_memmap() for_each_mem_pfn_range() __next_mem_pfn_range() type = &memblock.memory; One possible explanation for why this use-after-free hasn't been hit before is that the limit of INIT_MEMBLOCK_REGIONS has never been exceeded at least on systems where deferred struct pages were enabled. Tested by reducing INIT_MEMBLOCK_REGIONS down to 4 from the current 128, and verifying in qemu that this code is getting excuted and that the freed pages are sane. Link: http://lkml.kernel.org/r/1502485554-318703-2-git-send-email-pasha.tatashin@oracle.com Fixes: 7e18adb4f80b ("mm: meminit: initialise remaining struct pages in parallel with kswapd") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:05 +00:00
/**
* memblock_discard - discard memory and reserved arrays if they were allocated
mm: discard memblock data later There is existing use after free bug when deferred struct pages are enabled: The memblock_add() allocates memory for the memory array if more than 128 entries are needed. See comment in e820__memblock_setup(): * The bootstrap memblock region count maximum is 128 entries * (INIT_MEMBLOCK_REGIONS), but EFI might pass us more E820 entries * than that - so allow memblock resizing. This memblock memory is freed here: free_low_memory_core_early() We access the freed memblock.memory later in boot when deferred pages are initialized in this path: deferred_init_memmap() for_each_mem_pfn_range() __next_mem_pfn_range() type = &memblock.memory; One possible explanation for why this use-after-free hasn't been hit before is that the limit of INIT_MEMBLOCK_REGIONS has never been exceeded at least on systems where deferred struct pages were enabled. Tested by reducing INIT_MEMBLOCK_REGIONS down to 4 from the current 128, and verifying in qemu that this code is getting excuted and that the freed pages are sane. Link: http://lkml.kernel.org/r/1502485554-318703-2-git-send-email-pasha.tatashin@oracle.com Fixes: 7e18adb4f80b ("mm: meminit: initialise remaining struct pages in parallel with kswapd") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:05 +00:00
*/
void __init memblock_discard(void)
{
mm: discard memblock data later There is existing use after free bug when deferred struct pages are enabled: The memblock_add() allocates memory for the memory array if more than 128 entries are needed. See comment in e820__memblock_setup(): * The bootstrap memblock region count maximum is 128 entries * (INIT_MEMBLOCK_REGIONS), but EFI might pass us more E820 entries * than that - so allow memblock resizing. This memblock memory is freed here: free_low_memory_core_early() We access the freed memblock.memory later in boot when deferred pages are initialized in this path: deferred_init_memmap() for_each_mem_pfn_range() __next_mem_pfn_range() type = &memblock.memory; One possible explanation for why this use-after-free hasn't been hit before is that the limit of INIT_MEMBLOCK_REGIONS has never been exceeded at least on systems where deferred struct pages were enabled. Tested by reducing INIT_MEMBLOCK_REGIONS down to 4 from the current 128, and verifying in qemu that this code is getting excuted and that the freed pages are sane. Link: http://lkml.kernel.org/r/1502485554-318703-2-git-send-email-pasha.tatashin@oracle.com Fixes: 7e18adb4f80b ("mm: meminit: initialise remaining struct pages in parallel with kswapd") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:05 +00:00
phys_addr_t addr, size;
mm: discard memblock data later There is existing use after free bug when deferred struct pages are enabled: The memblock_add() allocates memory for the memory array if more than 128 entries are needed. See comment in e820__memblock_setup(): * The bootstrap memblock region count maximum is 128 entries * (INIT_MEMBLOCK_REGIONS), but EFI might pass us more E820 entries * than that - so allow memblock resizing. This memblock memory is freed here: free_low_memory_core_early() We access the freed memblock.memory later in boot when deferred pages are initialized in this path: deferred_init_memmap() for_each_mem_pfn_range() __next_mem_pfn_range() type = &memblock.memory; One possible explanation for why this use-after-free hasn't been hit before is that the limit of INIT_MEMBLOCK_REGIONS has never been exceeded at least on systems where deferred struct pages were enabled. Tested by reducing INIT_MEMBLOCK_REGIONS down to 4 from the current 128, and verifying in qemu that this code is getting excuted and that the freed pages are sane. Link: http://lkml.kernel.org/r/1502485554-318703-2-git-send-email-pasha.tatashin@oracle.com Fixes: 7e18adb4f80b ("mm: meminit: initialise remaining struct pages in parallel with kswapd") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:05 +00:00
if (memblock.reserved.regions != memblock_reserved_init_regions) {
addr = __pa(memblock.reserved.regions);
size = PAGE_ALIGN(sizeof(struct memblock_region) *
memblock.reserved.max);
__memblock_free_late(addr, size);
}
if (memblock.memory.regions != memblock_memory_init_regions) {
mm: discard memblock data later There is existing use after free bug when deferred struct pages are enabled: The memblock_add() allocates memory for the memory array if more than 128 entries are needed. See comment in e820__memblock_setup(): * The bootstrap memblock region count maximum is 128 entries * (INIT_MEMBLOCK_REGIONS), but EFI might pass us more E820 entries * than that - so allow memblock resizing. This memblock memory is freed here: free_low_memory_core_early() We access the freed memblock.memory later in boot when deferred pages are initialized in this path: deferred_init_memmap() for_each_mem_pfn_range() __next_mem_pfn_range() type = &memblock.memory; One possible explanation for why this use-after-free hasn't been hit before is that the limit of INIT_MEMBLOCK_REGIONS has never been exceeded at least on systems where deferred struct pages were enabled. Tested by reducing INIT_MEMBLOCK_REGIONS down to 4 from the current 128, and verifying in qemu that this code is getting excuted and that the freed pages are sane. Link: http://lkml.kernel.org/r/1502485554-318703-2-git-send-email-pasha.tatashin@oracle.com Fixes: 7e18adb4f80b ("mm: meminit: initialise remaining struct pages in parallel with kswapd") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-18 22:16:05 +00:00
addr = __pa(memblock.memory.regions);
size = PAGE_ALIGN(sizeof(struct memblock_region) *
memblock.memory.max);
__memblock_free_late(addr, size);
}
}
#endif
/**
* memblock_double_array - double the size of the memblock regions array
* @type: memblock type of the regions array being doubled
* @new_area_start: starting address of memory range to avoid overlap with
* @new_area_size: size of memory range to avoid overlap with
*
* Double the size of the @type regions array. If memblock is being used to
* allocate memory for a new reserved regions array and there is a previously
* allocated memory range [@new_area_start, @new_area_start + @new_area_size]
* waiting to be reserved, ensure the memory used by the new array does
* not overlap.
*
* Return:
* 0 on success, -1 on failure.
*/
static int __init_memblock memblock_double_array(struct memblock_type *type,
phys_addr_t new_area_start,
phys_addr_t new_area_size)
{
struct memblock_region *new_array, *old_array;
memblock: free allocated memblock_reserved_regions later memblock_free_reserved_regions() calls memblock_free(), but memblock_free() would double reserved.regions too, so we could free the old range for reserved.regions. Also tj said there is another bug which could be related to this. | I don't think we're saving any noticeable | amount by doing this "free - give it to page allocator - reserve | again" dancing. We should just allocate regions aligned to page | boundaries and free them later when memblock is no longer in use. in that case, when DEBUG_PAGEALLOC, will get panic: memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39 BUG: unable to handle kernel paging request at ffff88102febd948 IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447 RIP: 0010:[<ffffffff836a5774>] [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 See the discussion at https://lkml.org/lkml/2012/6/13/469 So try to allocate with PAGE_SIZE alignment and free it later. Reported-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11 21:02:56 +00:00
phys_addr_t old_alloc_size, new_alloc_size;
phys_addr_t old_size, new_size, addr, new_end;
int use_slab = slab_is_available();
int *in_slab;
/* We don't allow resizing until we know about the reserved regions
* of memory that aren't suitable for allocation
*/
if (!memblock_can_resize)
return -1;
/* Calculate new doubled size */
old_size = type->max * sizeof(struct memblock_region);
new_size = old_size << 1;
memblock: free allocated memblock_reserved_regions later memblock_free_reserved_regions() calls memblock_free(), but memblock_free() would double reserved.regions too, so we could free the old range for reserved.regions. Also tj said there is another bug which could be related to this. | I don't think we're saving any noticeable | amount by doing this "free - give it to page allocator - reserve | again" dancing. We should just allocate regions aligned to page | boundaries and free them later when memblock is no longer in use. in that case, when DEBUG_PAGEALLOC, will get panic: memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39 BUG: unable to handle kernel paging request at ffff88102febd948 IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447 RIP: 0010:[<ffffffff836a5774>] [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 See the discussion at https://lkml.org/lkml/2012/6/13/469 So try to allocate with PAGE_SIZE alignment and free it later. Reported-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11 21:02:56 +00:00
/*
* We need to allocated new one align to PAGE_SIZE,
* so we can free them completely later.
*/
old_alloc_size = PAGE_ALIGN(old_size);
new_alloc_size = PAGE_ALIGN(new_size);
/* Retrieve the slab flag */
if (type == &memblock.memory)
in_slab = &memblock_memory_in_slab;
else
in_slab = &memblock_reserved_in_slab;
/* Try to find some space for it */
if (use_slab) {
new_array = kmalloc(new_size, GFP_KERNEL);
addr = new_array ? __pa(new_array) : 0;
} else {
/* only exclude range when trying to double reserved.regions */
if (type != &memblock.reserved)
new_area_start = new_area_size = 0;
addr = memblock_find_in_range(new_area_start + new_area_size,
memblock.current_limit,
memblock: free allocated memblock_reserved_regions later memblock_free_reserved_regions() calls memblock_free(), but memblock_free() would double reserved.regions too, so we could free the old range for reserved.regions. Also tj said there is another bug which could be related to this. | I don't think we're saving any noticeable | amount by doing this "free - give it to page allocator - reserve | again" dancing. We should just allocate regions aligned to page | boundaries and free them later when memblock is no longer in use. in that case, when DEBUG_PAGEALLOC, will get panic: memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39 BUG: unable to handle kernel paging request at ffff88102febd948 IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447 RIP: 0010:[<ffffffff836a5774>] [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 See the discussion at https://lkml.org/lkml/2012/6/13/469 So try to allocate with PAGE_SIZE alignment and free it later. Reported-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11 21:02:56 +00:00
new_alloc_size, PAGE_SIZE);
if (!addr && new_area_size)
addr = memblock_find_in_range(0,
min(new_area_start, memblock.current_limit),
new_alloc_size, PAGE_SIZE);
new_array = addr ? __va(addr) : NULL;
}
if (!addr) {
pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n",
type->name, type->max, type->max * 2);
return -1;
}
new_end = addr + new_size - 1;
memblock_dbg("memblock: %s is doubled to %ld at [%pa-%pa]",
type->name, type->max * 2, &addr, &new_end);
/*
* Found space, we now need to move the array over before we add the
* reserved region since it may be our reserved array itself that is
* full.
*/
memcpy(new_array, type->regions, old_size);
memset(new_array + type->max, 0, old_size);
old_array = type->regions;
type->regions = new_array;
type->max <<= 1;
/* Free old array. We needn't free it if the array is the static one */
if (*in_slab)
kfree(old_array);
else if (old_array != memblock_memory_init_regions &&
old_array != memblock_reserved_init_regions)
memblock: free allocated memblock_reserved_regions later memblock_free_reserved_regions() calls memblock_free(), but memblock_free() would double reserved.regions too, so we could free the old range for reserved.regions. Also tj said there is another bug which could be related to this. | I don't think we're saving any noticeable | amount by doing this "free - give it to page allocator - reserve | again" dancing. We should just allocate regions aligned to page | boundaries and free them later when memblock is no longer in use. in that case, when DEBUG_PAGEALLOC, will get panic: memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39 BUG: unable to handle kernel paging request at ffff88102febd948 IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447 RIP: 0010:[<ffffffff836a5774>] [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 See the discussion at https://lkml.org/lkml/2012/6/13/469 So try to allocate with PAGE_SIZE alignment and free it later. Reported-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11 21:02:56 +00:00
memblock_free(__pa(old_array), old_alloc_size);
/*
* Reserve the new array if that comes from the memblock. Otherwise, we
* needn't do it
*/
if (!use_slab)
memblock: free allocated memblock_reserved_regions later memblock_free_reserved_regions() calls memblock_free(), but memblock_free() would double reserved.regions too, so we could free the old range for reserved.regions. Also tj said there is another bug which could be related to this. | I don't think we're saving any noticeable | amount by doing this "free - give it to page allocator - reserve | again" dancing. We should just allocate regions aligned to page | boundaries and free them later when memblock is no longer in use. in that case, when DEBUG_PAGEALLOC, will get panic: memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39 BUG: unable to handle kernel paging request at ffff88102febd948 IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447 RIP: 0010:[<ffffffff836a5774>] [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 See the discussion at https://lkml.org/lkml/2012/6/13/469 So try to allocate with PAGE_SIZE alignment and free it later. Reported-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11 21:02:56 +00:00
BUG_ON(memblock_reserve(addr, new_alloc_size));
/* Update slab flag */
*in_slab = use_slab;
return 0;
}
/**
* memblock_merge_regions - merge neighboring compatible regions
* @type: memblock type to scan
*
* Scan @type and merge neighboring compatible regions.
*/
static void __init_memblock memblock_merge_regions(struct memblock_type *type)
{
int i = 0;
/* cnt never goes below 1 */
while (i < type->cnt - 1) {
struct memblock_region *this = &type->regions[i];
struct memblock_region *next = &type->regions[i + 1];
if (this->base + this->size != next->base ||
memblock_get_region_node(this) !=
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
memblock_get_region_node(next) ||
this->flags != next->flags) {
BUG_ON(this->base + this->size > next->base);
i++;
continue;
}
this->size += next->size;
/* move forward from next + 1, index of which is i + 2 */
memmove(next, next + 1, (type->cnt - (i + 2)) * sizeof(*next));
type->cnt--;
}
}
/**
* memblock_insert_region - insert new memblock region
* @type: memblock type to insert into
* @idx: index for the insertion point
* @base: base address of the new region
* @size: size of the new region
* @nid: node id of the new region
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
* @flags: flags of the new region
*
* Insert new memblock region [@base, @base + @size) into @type at @idx.
* @type must already have extra room to accommodate the new region.
*/
static void __init_memblock memblock_insert_region(struct memblock_type *type,
int idx, phys_addr_t base,
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
phys_addr_t size,
int nid,
enum memblock_flags flags)
{
struct memblock_region *rgn = &type->regions[idx];
BUG_ON(type->cnt >= type->max);
memmove(rgn + 1, rgn, (type->cnt - idx) * sizeof(*rgn));
rgn->base = base;
rgn->size = size;
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
rgn->flags = flags;
memblock_set_region_node(rgn, nid);
type->cnt++;
type->total_size += size;
}
/**
* memblock_add_range - add new memblock region
* @type: memblock type to add new region into
* @base: base address of the new region
* @size: size of the new region
* @nid: nid of the new region
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
* @flags: flags of the new region
*
* Add new memblock region [@base, @base + @size) into @type. The new region
* is allowed to overlap with existing ones - overlaps don't affect already
* existing regions. @type is guaranteed to be minimal (all neighbouring
* compatible regions are merged) after the addition.
*
* Return:
* 0 on success, -errno on failure.
*/
static int __init_memblock memblock_add_range(struct memblock_type *type,
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
phys_addr_t base, phys_addr_t size,
int nid, enum memblock_flags flags)
{
bool insert = false;
phys_addr_t obase = base;
phys_addr_t end = base + memblock_cap_size(base, &size);
int idx, nr_new;
struct memblock_region *rgn;
if (!size)
return 0;
/* special case for empty array */
if (type->regions[0].size == 0) {
WARN_ON(type->cnt != 1 || type->total_size);
type->regions[0].base = base;
type->regions[0].size = size;
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
type->regions[0].flags = flags;
memblock_set_region_node(&type->regions[0], nid);
type->total_size = size;
return 0;
}
repeat:
/*
* The following is executed twice. Once with %false @insert and
* then with %true. The first counts the number of regions needed
* to accommodate the new area. The second actually inserts them.
*/
base = obase;
nr_new = 0;
for_each_memblock_type(idx, type, rgn) {
phys_addr_t rbase = rgn->base;
phys_addr_t rend = rbase + rgn->size;
if (rbase >= end)
break;
if (rend <= base)
continue;
/*
* @rgn overlaps. If it separates the lower part of new
* area, insert that portion.
*/
if (rbase > base) {
mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of nodes and zones structures between the systems that have region to node mapping in memblock and those that don't. Currently all the NUMA architectures enable this option and for the non-NUMA systems we can presume that all the memory belongs to node 0 and therefore the compile time configuration option is not required. The remaining few architectures that use DISCONTIGMEM without NUMA are easily updated to use memblock_add_node() instead of memblock_add() and thus have proper correspondence of memblock regions to NUMA nodes. Still, free_area_init_node() must have a backward compatible version because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is different. Once all the architectures will use the new semantics, the entire compatibility layer can be dropped. To avoid addition of extra run time memory to store node id for architectures that keep memblock but have only a single node, the node id field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and the corresponding accessors presume that in those cases it is always 0. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:57:02 +00:00
#ifdef CONFIG_NEED_MULTIPLE_NODES
WARN_ON(nid != memblock_get_region_node(rgn));
#endif
WARN_ON(flags != rgn->flags);
nr_new++;
if (insert)
memblock_insert_region(type, idx++, base,
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
rbase - base, nid,
flags);
}
/* area below @rend is dealt with, forget about it */
base = min(rend, end);
}
/* insert the remaining portion */
if (base < end) {
nr_new++;
if (insert)
memblock_insert_region(type, idx, base, end - base,
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
nid, flags);
}
if (!nr_new)
return 0;
/*
* If this was the first round, resize array and repeat for actual
* insertions; otherwise, merge and return.
*/
if (!insert) {
while (type->cnt + nr_new > type->max)
if (memblock_double_array(type, obase, size) < 0)
return -ENOMEM;
insert = true;
goto repeat;
} else {
memblock_merge_regions(type);
return 0;
}
}
/**
* memblock_add_node - add new memblock region within a NUMA node
* @base: base address of the new region
* @size: size of the new region
* @nid: nid of the new region
*
* Add new memblock region [@base, @base + @size) to the "memory"
* type. See memblock_add_range() description for mode details
*
* Return:
* 0 on success, -errno on failure.
*/
int __init_memblock memblock_add_node(phys_addr_t base, phys_addr_t size,
int nid)
{
return memblock_add_range(&memblock.memory, base, size, nid, 0);
}
/**
* memblock_add - add new memblock region
* @base: base address of the new region
* @size: size of the new region
*
* Add new memblock region [@base, @base + @size) to the "memory"
* type. See memblock_add_range() description for mode details
*
* Return:
* 0 on success, -errno on failure.
*/
int __init_memblock memblock_add(phys_addr_t base, phys_addr_t size)
{
phys_addr_t end = base + size - 1;
memblock_dbg("%s: [%pa-%pa] %pS\n", __func__,
&base, &end, (void *)_RET_IP_);
return memblock_add_range(&memblock.memory, base, size, MAX_NUMNODES, 0);
}
/**
* memblock_isolate_range - isolate given range into disjoint memblocks
* @type: memblock type to isolate range for
* @base: base of range to isolate
* @size: size of range to isolate
* @start_rgn: out parameter for the start of isolated region
* @end_rgn: out parameter for the end of isolated region
*
* Walk @type and ensure that regions don't cross the boundaries defined by
* [@base, @base + @size). Crossing regions are split at the boundaries,
* which may create at most two more regions. The index of the first
* region inside the range is returned in *@start_rgn and end in *@end_rgn.
*
* Return:
* 0 on success, -errno on failure.
*/
static int __init_memblock memblock_isolate_range(struct memblock_type *type,
phys_addr_t base, phys_addr_t size,
int *start_rgn, int *end_rgn)
{
phys_addr_t end = base + memblock_cap_size(base, &size);
int idx;
struct memblock_region *rgn;
*start_rgn = *end_rgn = 0;
if (!size)
return 0;
/* we'll create at most two more regions */
while (type->cnt + 2 > type->max)
if (memblock_double_array(type, base, size) < 0)
return -ENOMEM;
for_each_memblock_type(idx, type, rgn) {
phys_addr_t rbase = rgn->base;
phys_addr_t rend = rbase + rgn->size;
if (rbase >= end)
break;
if (rend <= base)
continue;
if (rbase < base) {
/*
* @rgn intersects from below. Split and continue
* to process the next region - the new top half.
*/
rgn->base = base;
rgn->size -= base - rbase;
type->total_size -= base - rbase;
memblock_insert_region(type, idx, rbase, base - rbase,
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
memblock_get_region_node(rgn),
rgn->flags);
} else if (rend > end) {
/*
* @rgn intersects from above. Split and redo the
* current region - the new bottom half.
*/
rgn->base = end;
rgn->size -= end - rbase;
type->total_size -= end - rbase;
memblock_insert_region(type, idx--, rbase, end - rbase,
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
memblock_get_region_node(rgn),
rgn->flags);
} else {
/* @rgn is fully contained, record it */
if (!*end_rgn)
*start_rgn = idx;
*end_rgn = idx + 1;
}
}
return 0;
}
static int __init_memblock memblock_remove_range(struct memblock_type *type,
phys_addr_t base, phys_addr_t size)
{
int start_rgn, end_rgn;
int i, ret;
ret = memblock_isolate_range(type, base, size, &start_rgn, &end_rgn);
if (ret)
return ret;
for (i = end_rgn - 1; i >= start_rgn; i--)
memblock_remove_region(type, i);
return 0;
}
int __init_memblock memblock_remove(phys_addr_t base, phys_addr_t size)
{
phys_addr_t end = base + size - 1;
memblock_dbg("%s: [%pa-%pa] %pS\n", __func__,
&base, &end, (void *)_RET_IP_);
return memblock_remove_range(&memblock.memory, base, size);
}
/**
* memblock_free - free boot memory block
* @base: phys starting address of the boot memory block
* @size: size of the boot memory block in bytes
*
* Free boot memory block previously allocated by memblock_alloc_xx() API.
* The freeing memory will not be released to the buddy allocator.
*/
int __init_memblock memblock_free(phys_addr_t base, phys_addr_t size)
{
phys_addr_t end = base + size - 1;
memblock_dbg("%s: [%pa-%pa] %pS\n", __func__,
&base, &end, (void *)_RET_IP_);
kmemleak_free_part_phys(base, size);
return memblock_remove_range(&memblock.reserved, base, size);
}
int __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size)
{
phys_addr_t end = base + size - 1;
memblock_dbg("%s: [%pa-%pa] %pS\n", __func__,
&base, &end, (void *)_RET_IP_);
return memblock_add_range(&memblock.reserved, base, size, MAX_NUMNODES, 0);
}
#ifdef CONFIG_HAVE_MEMBLOCK_PHYS_MAP
int __init_memblock memblock_physmem_add(phys_addr_t base, phys_addr_t size)
{
phys_addr_t end = base + size - 1;
memblock_dbg("%s: [%pa-%pa] %pS\n", __func__,
&base, &end, (void *)_RET_IP_);
mm/memblock: expose only miminal interface to add/walk physmem "physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-01 14:18:29 +00:00
return memblock_add_range(&physmem, base, size, MAX_NUMNODES, 0);
}
#endif
memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions In find_hotpluggable_memory, once we find out a memory region which is hotpluggable, we want to mark them in memblock.memory. So that we could control memblock allocator not to allocte hotpluggable memory for the kernel later. To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the hotpluggable memory regions in memblock and a function memblock_mark_hotplug() to mark hotpluggable memory if we find one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:23 +00:00
/**
* memblock_setclr_flag - set or clear flag for a memory region
* @base: base address of the region
* @size: size of the region
* @set: set or clear the flag
* @flag: the flag to udpate
memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions In find_hotpluggable_memory, once we find out a memory region which is hotpluggable, we want to mark them in memblock.memory. So that we could control memblock allocator not to allocte hotpluggable memory for the kernel later. To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the hotpluggable memory regions in memblock and a function memblock_mark_hotplug() to mark hotpluggable memory if we find one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:23 +00:00
*
* This function isolates region [@base, @base + @size), and sets/clears flag
memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions In find_hotpluggable_memory, once we find out a memory region which is hotpluggable, we want to mark them in memblock.memory. So that we could control memblock allocator not to allocte hotpluggable memory for the kernel later. To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the hotpluggable memory regions in memblock and a function memblock_mark_hotplug() to mark hotpluggable memory if we find one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:23 +00:00
*
* Return: 0 on success, -errno on failure.
memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions In find_hotpluggable_memory, once we find out a memory region which is hotpluggable, we want to mark them in memblock.memory. So that we could control memblock allocator not to allocte hotpluggable memory for the kernel later. To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the hotpluggable memory regions in memblock and a function memblock_mark_hotplug() to mark hotpluggable memory if we find one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:23 +00:00
*/
static int __init_memblock memblock_setclr_flag(phys_addr_t base,
phys_addr_t size, int set, int flag)
memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions In find_hotpluggable_memory, once we find out a memory region which is hotpluggable, we want to mark them in memblock.memory. So that we could control memblock allocator not to allocte hotpluggable memory for the kernel later. To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the hotpluggable memory regions in memblock and a function memblock_mark_hotplug() to mark hotpluggable memory if we find one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:23 +00:00
{
struct memblock_type *type = &memblock.memory;
int i, ret, start_rgn, end_rgn;
ret = memblock_isolate_range(type, base, size, &start_rgn, &end_rgn);
if (ret)
return ret;
for (i = start_rgn; i < end_rgn; i++) {
struct memblock_region *r = &type->regions[i];
if (set)
r->flags |= flag;
else
r->flags &= ~flag;
}
memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions In find_hotpluggable_memory, once we find out a memory region which is hotpluggable, we want to mark them in memblock.memory. So that we could control memblock allocator not to allocte hotpluggable memory for the kernel later. To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the hotpluggable memory regions in memblock and a function memblock_mark_hotplug() to mark hotpluggable memory if we find one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:23 +00:00
memblock_merge_regions(type);
return 0;
}
/**
* memblock_mark_hotplug - Mark hotpluggable memory with flag MEMBLOCK_HOTPLUG.
memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions In find_hotpluggable_memory, once we find out a memory region which is hotpluggable, we want to mark them in memblock.memory. So that we could control memblock allocator not to allocte hotpluggable memory for the kernel later. To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the hotpluggable memory regions in memblock and a function memblock_mark_hotplug() to mark hotpluggable memory if we find one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:23 +00:00
* @base: the base phys addr of the region
* @size: the size of the region
*
* Return: 0 on success, -errno on failure.
*/
int __init_memblock memblock_mark_hotplug(phys_addr_t base, phys_addr_t size)
{
return memblock_setclr_flag(base, size, 1, MEMBLOCK_HOTPLUG);
}
/**
* memblock_clear_hotplug - Clear flag MEMBLOCK_HOTPLUG for a specified region.
* @base: the base phys addr of the region
* @size: the size of the region
memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions In find_hotpluggable_memory, once we find out a memory region which is hotpluggable, we want to mark them in memblock.memory. So that we could control memblock allocator not to allocte hotpluggable memory for the kernel later. To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the hotpluggable memory regions in memblock and a function memblock_mark_hotplug() to mark hotpluggable memory if we find one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:23 +00:00
*
* Return: 0 on success, -errno on failure.
memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions In find_hotpluggable_memory, once we find out a memory region which is hotpluggable, we want to mark them in memblock.memory. So that we could control memblock allocator not to allocte hotpluggable memory for the kernel later. To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the hotpluggable memory regions in memblock and a function memblock_mark_hotplug() to mark hotpluggable memory if we find one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:23 +00:00
*/
int __init_memblock memblock_clear_hotplug(phys_addr_t base, phys_addr_t size)
{
return memblock_setclr_flag(base, size, 0, MEMBLOCK_HOTPLUG);
memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions In find_hotpluggable_memory, once we find out a memory region which is hotpluggable, we want to mark them in memblock.memory. So that we could control memblock allocator not to allocte hotpluggable memory for the kernel later. To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the hotpluggable memory regions in memblock and a function memblock_mark_hotplug() to mark hotpluggable memory if we find one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:23 +00:00
}
/**
* memblock_mark_mirror - Mark mirrored memory with flag MEMBLOCK_MIRROR.
* @base: the base phys addr of the region
* @size: the size of the region
*
* Return: 0 on success, -errno on failure.
*/
int __init_memblock memblock_mark_mirror(phys_addr_t base, phys_addr_t size)
{
system_has_some_mirror = true;
return memblock_setclr_flag(base, size, 1, MEMBLOCK_MIRROR);
}
/**
* memblock_mark_nomap - Mark a memory region with flag MEMBLOCK_NOMAP.
* @base: the base phys addr of the region
* @size: the size of the region
*
* Return: 0 on success, -errno on failure.
*/
int __init_memblock memblock_mark_nomap(phys_addr_t base, phys_addr_t size)
{
return memblock_setclr_flag(base, size, 1, MEMBLOCK_NOMAP);
}
/**
* memblock_clear_nomap - Clear flag MEMBLOCK_NOMAP for a specified region.
* @base: the base phys addr of the region
* @size: the size of the region
*
* Return: 0 on success, -errno on failure.
*/
int __init_memblock memblock_clear_nomap(phys_addr_t base, phys_addr_t size)
{
return memblock_setclr_flag(base, size, 0, MEMBLOCK_NOMAP);
}
memblock: introduce a for_each_reserved_mem_region iterator Struct page initialisation had been identified as one of the reasons why large machines take a long time to boot. Patches were posted a long time ago to defer initialisation until they were first used. This was rejected on the grounds it should not be necessary to hurt the fast paths. This series reuses much of the work from that time but defers the initialisation of memory to kswapd so that one thread per node initialises memory local to that node. After applying the series and setting the appropriate Kconfig variable I see this in the boot log on a 64G machine [ 7.383764] kswapd 0 initialised deferred memory in 188ms [ 7.404253] kswapd 1 initialised deferred memory in 208ms [ 7.411044] kswapd 3 initialised deferred memory in 216ms [ 7.411551] kswapd 2 initialised deferred memory in 216ms On a 1TB machine, I see [ 8.406511] kswapd 3 initialised deferred memory in 1116ms [ 8.428518] kswapd 1 initialised deferred memory in 1140ms [ 8.435977] kswapd 0 initialised deferred memory in 1148ms [ 8.437416] kswapd 2 initialised deferred memory in 1148ms Once booted the machine appears to work as normal. Boot times were measured from the time shutdown was called until ssh was available again. In the 64G case, the boot time savings are negligible. On the 1TB machine, the savings were 16 seconds. Nate Zimmer said: : On an older 8 TB box with lots and lots of cpus the boot time, as : measure from grub to login prompt, the boot time improved from 1484 : seconds to exactly 1000 seconds. Waiman Long said: : I ran a bootup timing test on a 12-TB 16-socket IvyBridge-EX system. From : grub menu to ssh login, the bootup time was 453s before the patch and 265s : after the patch - a saving of 188s (42%). Daniel Blueman said: : On a 7TB, 1728-core NumaConnect system with 108 NUMA nodes, we're seeing : stock 4.0 boot in 7136s. This drops to 2159s, or a 70% reduction with : this patchset. Non-temporal PMD init (https://lkml.org/lkml/2015/4/23/350) : drops this to 1045s. This patch (of 13): As part of initializing struct page's in 2MiB chunks, we noticed that at the end of free_all_bootmem(), there was nothing which had forced the reserved/allocated 4KiB pages to be initialized. This helper function will be used for that expansion. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Nate Zimmer <nzimmer@sgi.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Nate Zimmer <nzimmer@sgi.com> Tested-by: Waiman Long <waiman.long@hp.com> Tested-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:56:41 +00:00
/**
* __next_reserved_mem_region - next function for for_each_reserved_region()
* @idx: pointer to u64 loop variable
* @out_start: ptr to phys_addr_t for start address of the region, can be %NULL
* @out_end: ptr to phys_addr_t for end address of the region, can be %NULL
*
* Iterate over all reserved memory regions.
*/
void __init_memblock __next_reserved_mem_region(u64 *idx,
phys_addr_t *out_start,
phys_addr_t *out_end)
{
struct memblock_type *type = &memblock.reserved;
memblock: introduce a for_each_reserved_mem_region iterator Struct page initialisation had been identified as one of the reasons why large machines take a long time to boot. Patches were posted a long time ago to defer initialisation until they were first used. This was rejected on the grounds it should not be necessary to hurt the fast paths. This series reuses much of the work from that time but defers the initialisation of memory to kswapd so that one thread per node initialises memory local to that node. After applying the series and setting the appropriate Kconfig variable I see this in the boot log on a 64G machine [ 7.383764] kswapd 0 initialised deferred memory in 188ms [ 7.404253] kswapd 1 initialised deferred memory in 208ms [ 7.411044] kswapd 3 initialised deferred memory in 216ms [ 7.411551] kswapd 2 initialised deferred memory in 216ms On a 1TB machine, I see [ 8.406511] kswapd 3 initialised deferred memory in 1116ms [ 8.428518] kswapd 1 initialised deferred memory in 1140ms [ 8.435977] kswapd 0 initialised deferred memory in 1148ms [ 8.437416] kswapd 2 initialised deferred memory in 1148ms Once booted the machine appears to work as normal. Boot times were measured from the time shutdown was called until ssh was available again. In the 64G case, the boot time savings are negligible. On the 1TB machine, the savings were 16 seconds. Nate Zimmer said: : On an older 8 TB box with lots and lots of cpus the boot time, as : measure from grub to login prompt, the boot time improved from 1484 : seconds to exactly 1000 seconds. Waiman Long said: : I ran a bootup timing test on a 12-TB 16-socket IvyBridge-EX system. From : grub menu to ssh login, the bootup time was 453s before the patch and 265s : after the patch - a saving of 188s (42%). Daniel Blueman said: : On a 7TB, 1728-core NumaConnect system with 108 NUMA nodes, we're seeing : stock 4.0 boot in 7136s. This drops to 2159s, or a 70% reduction with : this patchset. Non-temporal PMD init (https://lkml.org/lkml/2015/4/23/350) : drops this to 1045s. This patch (of 13): As part of initializing struct page's in 2MiB chunks, we noticed that at the end of free_all_bootmem(), there was nothing which had forced the reserved/allocated 4KiB pages to be initialized. This helper function will be used for that expansion. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Nate Zimmer <nzimmer@sgi.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Nate Zimmer <nzimmer@sgi.com> Tested-by: Waiman Long <waiman.long@hp.com> Tested-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:56:41 +00:00
if (*idx < type->cnt) {
struct memblock_region *r = &type->regions[*idx];
memblock: introduce a for_each_reserved_mem_region iterator Struct page initialisation had been identified as one of the reasons why large machines take a long time to boot. Patches were posted a long time ago to defer initialisation until they were first used. This was rejected on the grounds it should not be necessary to hurt the fast paths. This series reuses much of the work from that time but defers the initialisation of memory to kswapd so that one thread per node initialises memory local to that node. After applying the series and setting the appropriate Kconfig variable I see this in the boot log on a 64G machine [ 7.383764] kswapd 0 initialised deferred memory in 188ms [ 7.404253] kswapd 1 initialised deferred memory in 208ms [ 7.411044] kswapd 3 initialised deferred memory in 216ms [ 7.411551] kswapd 2 initialised deferred memory in 216ms On a 1TB machine, I see [ 8.406511] kswapd 3 initialised deferred memory in 1116ms [ 8.428518] kswapd 1 initialised deferred memory in 1140ms [ 8.435977] kswapd 0 initialised deferred memory in 1148ms [ 8.437416] kswapd 2 initialised deferred memory in 1148ms Once booted the machine appears to work as normal. Boot times were measured from the time shutdown was called until ssh was available again. In the 64G case, the boot time savings are negligible. On the 1TB machine, the savings were 16 seconds. Nate Zimmer said: : On an older 8 TB box with lots and lots of cpus the boot time, as : measure from grub to login prompt, the boot time improved from 1484 : seconds to exactly 1000 seconds. Waiman Long said: : I ran a bootup timing test on a 12-TB 16-socket IvyBridge-EX system. From : grub menu to ssh login, the bootup time was 453s before the patch and 265s : after the patch - a saving of 188s (42%). Daniel Blueman said: : On a 7TB, 1728-core NumaConnect system with 108 NUMA nodes, we're seeing : stock 4.0 boot in 7136s. This drops to 2159s, or a 70% reduction with : this patchset. Non-temporal PMD init (https://lkml.org/lkml/2015/4/23/350) : drops this to 1045s. This patch (of 13): As part of initializing struct page's in 2MiB chunks, we noticed that at the end of free_all_bootmem(), there was nothing which had forced the reserved/allocated 4KiB pages to be initialized. This helper function will be used for that expansion. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Nate Zimmer <nzimmer@sgi.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Nate Zimmer <nzimmer@sgi.com> Tested-by: Waiman Long <waiman.long@hp.com> Tested-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:56:41 +00:00
phys_addr_t base = r->base;
phys_addr_t size = r->size;
if (out_start)
*out_start = base;
if (out_end)
*out_end = base + size - 1;
*idx += 1;
return;
}
/* signal end of iteration */
*idx = ULLONG_MAX;
}
static bool should_skip_region(struct memblock_region *m, int nid, int flags)
{
int m_nid = memblock_get_region_node(m);
/* only memory regions are associated with nodes, check it */
if (nid != NUMA_NO_NODE && nid != m_nid)
return true;
/* skip hotpluggable memory regions if needed */
if (movable_node_is_enabled() && memblock_is_hotpluggable(m))
return true;
/* if we want mirror memory skip non-mirror memory regions */
if ((flags & MEMBLOCK_MIRROR) && !memblock_is_mirror(m))
return true;
/* skip nomap memory unless we were asked for it explicitly */
if (!(flags & MEMBLOCK_NOMAP) && memblock_is_nomap(m))
return true;
return false;
}
/**
* __next_mem_range - next function for for_each_free_mem_range() etc.
* @idx: pointer to u64 loop variable
* @nid: node selector, %NUMA_NO_NODE for all nodes
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
* @flags: pick from blocks based on memory attributes
* @type_a: pointer to memblock_type from where the range is taken
* @type_b: pointer to memblock_type which excludes memory from being taken
* @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
* @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
* @out_nid: ptr to int for nid of the range, can be %NULL
*
* Find the first area from *@idx which matches @nid, fill the out
* parameters, and update *@idx for the next iteration. The lower 32bit of
* *@idx contains index into type_a and the upper 32bit indexes the
* areas before each region in type_b. For example, if type_b regions
* look like the following,
*
* 0:[0-16), 1:[32-48), 2:[128-130)
*
* The upper 32bit indexes the following regions.
*
* 0:[0-0), 1:[16-32), 2:[48-128), 3:[130-MAX)
*
* As both region arrays are sorted, the function advances the two indices
* in lockstep and returns each intersection.
*/
mm/memblock: expose only miminal interface to add/walk physmem "physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-01 14:18:29 +00:00
void __next_mem_range(u64 *idx, int nid, enum memblock_flags flags,
struct memblock_type *type_a,
struct memblock_type *type_b, phys_addr_t *out_start,
phys_addr_t *out_end, int *out_nid)
{
int idx_a = *idx & 0xffffffff;
int idx_b = *idx >> 32;
if (WARN_ONCE(nid == MAX_NUMNODES,
"Usage of MAX_NUMNODES is deprecated. Use NUMA_NO_NODE instead\n"))
nid = NUMA_NO_NODE;
for (; idx_a < type_a->cnt; idx_a++) {
struct memblock_region *m = &type_a->regions[idx_a];
phys_addr_t m_start = m->base;
phys_addr_t m_end = m->base + m->size;
int m_nid = memblock_get_region_node(m);
if (should_skip_region(m, nid, flags))
continue;
if (!type_b) {
if (out_start)
*out_start = m_start;
if (out_end)
*out_end = m_end;
if (out_nid)
*out_nid = m_nid;
idx_a++;
*idx = (u32)idx_a | (u64)idx_b << 32;
return;
}
/* scan areas before each reservation */
for (; idx_b < type_b->cnt + 1; idx_b++) {
struct memblock_region *r;
phys_addr_t r_start;
phys_addr_t r_end;
r = &type_b->regions[idx_b];
r_start = idx_b ? r[-1].base + r[-1].size : 0;
r_end = idx_b < type_b->cnt ?
r->base : PHYS_ADDR_MAX;
/*
* if idx_b advanced past idx_a,
* break out to advance idx_a
*/
if (r_start >= m_end)
break;
/* if the two regions intersect, we're done */
if (m_start < r_end) {
if (out_start)
*out_start =
max(m_start, r_start);
if (out_end)
*out_end = min(m_end, r_end);
if (out_nid)
*out_nid = m_nid;
/*
* The region which ends first is
* advanced for the next iteration.
*/
if (m_end <= r_end)
idx_a++;
else
idx_b++;
*idx = (u32)idx_a | (u64)idx_b << 32;
return;
}
}
}
/* signal end of iteration */
*idx = ULLONG_MAX;
}
/**
* __next_mem_range_rev - generic next function for for_each_*_range_rev()
*
* @idx: pointer to u64 loop variable
* @nid: node selector, %NUMA_NO_NODE for all nodes
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
* @flags: pick from blocks based on memory attributes
* @type_a: pointer to memblock_type from where the range is taken
* @type_b: pointer to memblock_type which excludes memory from being taken
* @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
* @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
* @out_nid: ptr to int for nid of the range, can be %NULL
*
* Finds the next range from type_a which is not marked as unsuitable
* in type_b.
*
* Reverse of __next_mem_range().
*/
void __init_memblock __next_mem_range_rev(u64 *idx, int nid,
enum memblock_flags flags,
struct memblock_type *type_a,
struct memblock_type *type_b,
phys_addr_t *out_start,
phys_addr_t *out_end, int *out_nid)
{
int idx_a = *idx & 0xffffffff;
int idx_b = *idx >> 32;
if (WARN_ONCE(nid == MAX_NUMNODES, "Usage of MAX_NUMNODES is deprecated. Use NUMA_NO_NODE instead\n"))
nid = NUMA_NO_NODE;
if (*idx == (u64)ULLONG_MAX) {
idx_a = type_a->cnt - 1;
if (type_b != NULL)
idx_b = type_b->cnt;
else
idx_b = 0;
}
for (; idx_a >= 0; idx_a--) {
struct memblock_region *m = &type_a->regions[idx_a];
phys_addr_t m_start = m->base;
phys_addr_t m_end = m->base + m->size;
int m_nid = memblock_get_region_node(m);
if (should_skip_region(m, nid, flags))
continue;
if (!type_b) {
if (out_start)
*out_start = m_start;
if (out_end)
*out_end = m_end;
if (out_nid)
*out_nid = m_nid;
idx_a--;
*idx = (u32)idx_a | (u64)idx_b << 32;
return;
}
/* scan areas before each reservation */
for (; idx_b >= 0; idx_b--) {
struct memblock_region *r;
phys_addr_t r_start;
phys_addr_t r_end;
r = &type_b->regions[idx_b];
r_start = idx_b ? r[-1].base + r[-1].size : 0;
r_end = idx_b < type_b->cnt ?
r->base : PHYS_ADDR_MAX;
/*
* if idx_b advanced past idx_a,
* break out to advance idx_a
*/
if (r_end <= m_start)
break;
/* if the two regions intersect, we're done */
if (m_end > r_start) {
if (out_start)
*out_start = max(m_start, r_start);
if (out_end)
*out_end = min(m_end, r_end);
if (out_nid)
*out_nid = m_nid;
if (m_start >= r_start)
idx_a--;
else
idx_b--;
*idx = (u32)idx_a | (u64)idx_b << 32;
return;
}
}
}
/* signal end of iteration */
*idx = ULLONG_MAX;
}
/*
* Common iterator interface used to define for_each_mem_pfn_range().
*/
void __init_memblock __next_mem_pfn_range(int *idx, int nid,
unsigned long *out_start_pfn,
unsigned long *out_end_pfn, int *out_nid)
{
struct memblock_type *type = &memblock.memory;
struct memblock_region *r;
mm: memblock: replace dereferences of memblock_region.nid with API calls Patch series "mm: rework free_area_init*() funcitons". After the discussion [1] about removal of CONFIG_NODES_SPAN_OTHER_NODES and CONFIG_HAVE_MEMBLOCK_NODE_MAP options, I took it a bit further and updated the node/zone initialization. Since all architectures have memblock, it is possible to use only the newer version of free_area_init_node() that calculates the zone and node boundaries based on memblock node mapping and architectural limits on possible zone PFNs. The architectures that still determined zone and hole sizes can be switched to the generic code and the old code that took those zone and hole sizes can be simply removed. And, since it all started from the removal of CONFIG_NODES_SPAN_OTHER_NODES, the memmap_init() is now updated to iterate over memblocks and so it does not need to perform early_pfn_to_nid() query for every PFN. [1] https://lore.kernel.org/lkml/1585420282-25630-1-git-send-email-Hoan@os.amperecomputing.com This patch (of 21): There are several places in the code that directly dereference memblock_region.nid despite this field being defined only when CONFIG_HAVE_MEMBLOCK_NODE_MAP=y. Replace these with calls to memblock_get_region_nid() to improve code robustness and to avoid possible breakage when CONFIG_HAVE_MEMBLOCK_NODE_MAP will be removed. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200412194859.12663-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:56:53 +00:00
int r_nid;
while (++*idx < type->cnt) {
r = &type->regions[*idx];
mm: memblock: replace dereferences of memblock_region.nid with API calls Patch series "mm: rework free_area_init*() funcitons". After the discussion [1] about removal of CONFIG_NODES_SPAN_OTHER_NODES and CONFIG_HAVE_MEMBLOCK_NODE_MAP options, I took it a bit further and updated the node/zone initialization. Since all architectures have memblock, it is possible to use only the newer version of free_area_init_node() that calculates the zone and node boundaries based on memblock node mapping and architectural limits on possible zone PFNs. The architectures that still determined zone and hole sizes can be switched to the generic code and the old code that took those zone and hole sizes can be simply removed. And, since it all started from the removal of CONFIG_NODES_SPAN_OTHER_NODES, the memmap_init() is now updated to iterate over memblocks and so it does not need to perform early_pfn_to_nid() query for every PFN. [1] https://lore.kernel.org/lkml/1585420282-25630-1-git-send-email-Hoan@os.amperecomputing.com This patch (of 21): There are several places in the code that directly dereference memblock_region.nid despite this field being defined only when CONFIG_HAVE_MEMBLOCK_NODE_MAP=y. Replace these with calls to memblock_get_region_nid() to improve code robustness and to avoid possible breakage when CONFIG_HAVE_MEMBLOCK_NODE_MAP will be removed. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200412194859.12663-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:56:53 +00:00
r_nid = memblock_get_region_node(r);
if (PFN_UP(r->base) >= PFN_DOWN(r->base + r->size))
continue;
mm: memblock: replace dereferences of memblock_region.nid with API calls Patch series "mm: rework free_area_init*() funcitons". After the discussion [1] about removal of CONFIG_NODES_SPAN_OTHER_NODES and CONFIG_HAVE_MEMBLOCK_NODE_MAP options, I took it a bit further and updated the node/zone initialization. Since all architectures have memblock, it is possible to use only the newer version of free_area_init_node() that calculates the zone and node boundaries based on memblock node mapping and architectural limits on possible zone PFNs. The architectures that still determined zone and hole sizes can be switched to the generic code and the old code that took those zone and hole sizes can be simply removed. And, since it all started from the removal of CONFIG_NODES_SPAN_OTHER_NODES, the memmap_init() is now updated to iterate over memblocks and so it does not need to perform early_pfn_to_nid() query for every PFN. [1] https://lore.kernel.org/lkml/1585420282-25630-1-git-send-email-Hoan@os.amperecomputing.com This patch (of 21): There are several places in the code that directly dereference memblock_region.nid despite this field being defined only when CONFIG_HAVE_MEMBLOCK_NODE_MAP=y. Replace these with calls to memblock_get_region_nid() to improve code robustness and to avoid possible breakage when CONFIG_HAVE_MEMBLOCK_NODE_MAP will be removed. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200412194859.12663-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:56:53 +00:00
if (nid == MAX_NUMNODES || nid == r_nid)
break;
}
if (*idx >= type->cnt) {
*idx = -1;
return;
}
if (out_start_pfn)
*out_start_pfn = PFN_UP(r->base);
if (out_end_pfn)
*out_end_pfn = PFN_DOWN(r->base + r->size);
if (out_nid)
mm: memblock: replace dereferences of memblock_region.nid with API calls Patch series "mm: rework free_area_init*() funcitons". After the discussion [1] about removal of CONFIG_NODES_SPAN_OTHER_NODES and CONFIG_HAVE_MEMBLOCK_NODE_MAP options, I took it a bit further and updated the node/zone initialization. Since all architectures have memblock, it is possible to use only the newer version of free_area_init_node() that calculates the zone and node boundaries based on memblock node mapping and architectural limits on possible zone PFNs. The architectures that still determined zone and hole sizes can be switched to the generic code and the old code that took those zone and hole sizes can be simply removed. And, since it all started from the removal of CONFIG_NODES_SPAN_OTHER_NODES, the memmap_init() is now updated to iterate over memblocks and so it does not need to perform early_pfn_to_nid() query for every PFN. [1] https://lore.kernel.org/lkml/1585420282-25630-1-git-send-email-Hoan@os.amperecomputing.com This patch (of 21): There are several places in the code that directly dereference memblock_region.nid despite this field being defined only when CONFIG_HAVE_MEMBLOCK_NODE_MAP=y. Replace these with calls to memblock_get_region_nid() to improve code robustness and to avoid possible breakage when CONFIG_HAVE_MEMBLOCK_NODE_MAP will be removed. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200412194859.12663-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:56:53 +00:00
*out_nid = r_nid;
}
/**
* memblock_set_node - set node ID on memblock regions
* @base: base of area to set node ID for
* @size: size of area to set node ID for
* @type: memblock type to set node ID for
* @nid: node ID to set
*
* Set the nid of memblock @type regions in [@base, @base + @size) to @nid.
* Regions which cross the area boundaries are split as necessary.
*
* Return:
* 0 on success, -errno on failure.
*/
int __init_memblock memblock_set_node(phys_addr_t base, phys_addr_t size,
struct memblock_type *type, int nid)
{
mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of nodes and zones structures between the systems that have region to node mapping in memblock and those that don't. Currently all the NUMA architectures enable this option and for the non-NUMA systems we can presume that all the memory belongs to node 0 and therefore the compile time configuration option is not required. The remaining few architectures that use DISCONTIGMEM without NUMA are easily updated to use memblock_add_node() instead of memblock_add() and thus have proper correspondence of memblock regions to NUMA nodes. Still, free_area_init_node() must have a backward compatible version because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is different. Once all the architectures will use the new semantics, the entire compatibility layer can be dropped. To avoid addition of extra run time memory to store node id for architectures that keep memblock but have only a single node, the node id field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and the corresponding accessors presume that in those cases it is always 0. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:57:02 +00:00
#ifdef CONFIG_NEED_MULTIPLE_NODES
int start_rgn, end_rgn;
int i, ret;
ret = memblock_isolate_range(type, base, size, &start_rgn, &end_rgn);
if (ret)
return ret;
for (i = start_rgn; i < end_rgn; i++)
memblock_set_region_node(&type->regions[i], nid);
memblock_merge_regions(type);
mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of nodes and zones structures between the systems that have region to node mapping in memblock and those that don't. Currently all the NUMA architectures enable this option and for the non-NUMA systems we can presume that all the memory belongs to node 0 and therefore the compile time configuration option is not required. The remaining few architectures that use DISCONTIGMEM without NUMA are easily updated to use memblock_add_node() instead of memblock_add() and thus have proper correspondence of memblock regions to NUMA nodes. Still, free_area_init_node() must have a backward compatible version because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is different. Once all the architectures will use the new semantics, the entire compatibility layer can be dropped. To avoid addition of extra run time memory to store node id for architectures that keep memblock but have only a single node, the node id field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and the corresponding accessors presume that in those cases it is always 0. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:57:02 +00:00
#endif
return 0;
}
mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of nodes and zones structures between the systems that have region to node mapping in memblock and those that don't. Currently all the NUMA architectures enable this option and for the non-NUMA systems we can presume that all the memory belongs to node 0 and therefore the compile time configuration option is not required. The remaining few architectures that use DISCONTIGMEM without NUMA are easily updated to use memblock_add_node() instead of memblock_add() and thus have proper correspondence of memblock regions to NUMA nodes. Still, free_area_init_node() must have a backward compatible version because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is different. Once all the architectures will use the new semantics, the entire compatibility layer can be dropped. To avoid addition of extra run time memory to store node id for architectures that keep memblock but have only a single node, the node id field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and the corresponding accessors presume that in those cases it is always 0. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:57:02 +00:00
mm: implement new zone specific memblock iterator Introduce a new iterator for_each_free_mem_pfn_range_in_zone. This iterator will take care of making sure a given memory range provided is in fact contained within a zone. It takes are of all the bounds checking we were doing in deferred_grow_zone, and deferred_init_memmap. In addition it should help to speed up the search a bit by iterating until the end of a range is greater than the start of the zone pfn range, and will exit completely if the start is beyond the end of the zone. Link: http://lkml.kernel.org/r/20190405221225.12227.22573.stgit@localhost.localdomain Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <yi.z.zhang@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:21:17 +00:00
#ifdef CONFIG_DEFERRED_STRUCT_PAGE_INIT
/**
* __next_mem_pfn_range_in_zone - iterator for for_each_*_range_in_zone()
*
* @idx: pointer to u64 loop variable
* @zone: zone in which all of the memory blocks reside
* @out_spfn: ptr to ulong for start pfn of the range, can be %NULL
* @out_epfn: ptr to ulong for end pfn of the range, can be %NULL
*
* This function is meant to be a zone/pfn specific wrapper for the
* for_each_mem_range type iterators. Specifically they are used in the
* deferred memory init routines and as such we were duplicating much of
* this logic throughout the code. So instead of having it in multiple
* locations it seemed like it would make more sense to centralize this to
* one new iterator that does everything they need.
*/
void __init_memblock
__next_mem_pfn_range_in_zone(u64 *idx, struct zone *zone,
unsigned long *out_spfn, unsigned long *out_epfn)
{
int zone_nid = zone_to_nid(zone);
phys_addr_t spa, epa;
int nid;
__next_mem_range(idx, zone_nid, MEMBLOCK_NONE,
&memblock.memory, &memblock.reserved,
&spa, &epa, &nid);
while (*idx != U64_MAX) {
unsigned long epfn = PFN_DOWN(epa);
unsigned long spfn = PFN_UP(spa);
/*
* Verify the end is at least past the start of the zone and
* that we have at least one PFN to initialize.
*/
if (zone->zone_start_pfn < epfn && spfn < epfn) {
/* if we went too far just stop searching */
if (zone_end_pfn(zone) <= spfn) {
*idx = U64_MAX;
break;
}
if (out_spfn)
*out_spfn = max(zone->zone_start_pfn, spfn);
if (out_epfn)
*out_epfn = min(zone_end_pfn(zone), epfn);
return;
}
__next_mem_range(idx, zone_nid, MEMBLOCK_NONE,
&memblock.memory, &memblock.reserved,
&spa, &epa, &nid);
}
/* signal end of iteration */
if (out_spfn)
*out_spfn = ULONG_MAX;
if (out_epfn)
*out_epfn = 0;
}
#endif /* CONFIG_DEFERRED_STRUCT_PAGE_INIT */
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
/**
* memblock_alloc_range_nid - allocate boot memory block
* @size: size of memory block to be allocated in bytes
* @align: alignment of the region and block's size
* @start: the lower bound of the memory region to allocate (phys address)
* @end: the upper bound of the memory region to allocate (phys address)
* @nid: nid of the free area to find, %NUMA_NO_NODE for any node
* @exact_nid: control the allocation fall back to other nodes
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
*
* The allocation is performed from memory region limited by
* memblock.current_limit if @end == %MEMBLOCK_ALLOC_ACCESSIBLE.
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
*
* If the specified node can not hold the requested memory and @exact_nid
* is false, the allocation falls back to any node in the system.
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
*
* For systems with memory mirroring, the allocation is attempted first
* from the regions with mirroring enabled and then retried from any
* memory region.
*
* In addition, function sets the min_count to 0 using kmemleak_alloc_phys for
* allocated boot memory block, so that it is never reported as leaks.
*
* Return:
* Physical address of allocated memory block on success, %0 on failure.
*/
phys_addr_t __init memblock_alloc_range_nid(phys_addr_t size,
phys_addr_t align, phys_addr_t start,
phys_addr_t end, int nid,
bool exact_nid)
{
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
enum memblock_flags flags = choose_memblock_flags();
phys_addr_t found;
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
if (WARN_ONCE(nid == MAX_NUMNODES, "Usage of MAX_NUMNODES is deprecated. Use NUMA_NO_NODE instead\n"))
nid = NUMA_NO_NODE;
if (!align) {
/* Can't use WARNs this early in boot on powerpc */
dump_stack();
align = SMP_CACHE_BYTES;
}
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
again:
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:58:09 +00:00
found = memblock_find_in_range_node(size, align, start, end, nid,
flags);
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
if (found && !memblock_reserve(found, size))
goto done;
if (nid != NUMA_NO_NODE && !exact_nid) {
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
found = memblock_find_in_range_node(size, align, start,
end, NUMA_NO_NODE,
flags);
if (found && !memblock_reserve(found, size))
goto done;
}
if (flags & MEMBLOCK_MIRROR) {
flags &= ~MEMBLOCK_MIRROR;
pr_warn("Could not allocate %pap bytes of mirrored memory\n",
&size);
goto again;
}
return 0;
done:
/* Skip kmemleak for kasan_init() due to high volume. */
if (end != MEMBLOCK_ALLOC_KASAN)
/*
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
* The min_count is set to 0 so that memblock allocated
* blocks are never reported as leaks. This is because many
* of these blocks are only referred via the physical
* address which is not looked up by kmemleak.
*/
kmemleak_alloc_phys(found, size, 0, 0);
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
return found;
}
/**
* memblock_phys_alloc_range - allocate a memory block inside specified range
* @size: size of memory block to be allocated in bytes
* @align: alignment of the region and block's size
* @start: the lower bound of the memory region to allocate (physical address)
* @end: the upper bound of the memory region to allocate (physical address)
*
* Allocate @size bytes in the between @start and @end.
*
* Return: physical address of the allocated memory block on success,
* %0 on failure.
*/
memblock: emphasize that memblock_alloc_range() returns a physical address Rename memblock_alloc_range() to memblock_phys_alloc_range() to emphasize that it returns a physical address. While on it, remove the 'enum memblock_flags' parameter from this function as its only user anyway sets it to MEMBLOCK_NONE, which is the default for the most of memblock allocations. Link: http://lkml.kernel.org/r/1548057848-15136-6-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:16 +00:00
phys_addr_t __init memblock_phys_alloc_range(phys_addr_t size,
phys_addr_t align,
phys_addr_t start,
phys_addr_t end)
{
return memblock_alloc_range_nid(size, align, start, end, NUMA_NO_NODE,
false);
}
/**
* memblock_phys_alloc_try_nid - allocate a memory block from specified MUMA node
* @size: size of memory block to be allocated in bytes
* @align: alignment of the region and block's size
* @nid: nid of the free area to find, %NUMA_NO_NODE for any node
*
* Allocates memory block from the specified NUMA node. If the node
* has no available memory, attempts to allocated from any node in the
* system.
*
* Return: physical address of the allocated memory block on success,
* %0 on failure.
*/
memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc* Make it explicit that the caller gets a physical address rather than a virtual one. This will also allow using meblock_alloc prefix for memblock allocations returning virtual address, which is done in the following patches. The conversion is done using the following semantic patch: @@ expression e1, e2, e3; @@ ( - memblock_alloc(e1, e2) + memblock_phys_alloc(e1, e2) | - memblock_alloc_nid(e1, e2, e3) + memblock_phys_alloc_nid(e1, e2, e3) | - memblock_alloc_try_nid(e1, e2, e3) + memblock_phys_alloc_try_nid(e1, e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:07:59 +00:00
phys_addr_t __init memblock_phys_alloc_try_nid(phys_addr_t size, phys_addr_t align, int nid)
{
memblock: memblock_phys_alloc_try_nid(): don't panic The memblock_phys_alloc_try_nid() function tries to allocate memory from the requested node and then falls back to allocation from any node in the system. The memblock_alloc_base() fallback used by this function panics if the allocation fails. Replace the memblock_alloc_base() fallback with the direct call to memblock_alloc_range_nid() and update the memblock_phys_alloc_try_nid() callers to check the returned value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-7-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:21 +00:00
return memblock_alloc_range_nid(size, align, 0,
MEMBLOCK_ALLOC_ACCESSIBLE, nid, false);
}
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
/**
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:08:04 +00:00
* memblock_alloc_internal - allocate boot memory block
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
* @size: size of memory block to be allocated in bytes
* @align: alignment of the region and block's size
* @min_addr: the lower bound of the memory region to allocate (phys address)
* @max_addr: the upper bound of the memory region to allocate (phys address)
* @nid: nid of the free area to find, %NUMA_NO_NODE for any node
* @exact_nid: control the allocation fall back to other nodes
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
*
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
* Allocates memory block using memblock_alloc_range_nid() and
* converts the returned physical address to virtual.
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
*
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
* The @min_addr limit is dropped if it can not be satisfied and the allocation
* will fall back to memory below @min_addr. Other constraints, such
* as node and mirrored memory will be handled again in
* memblock_alloc_range_nid().
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
*
* Return:
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
* Virtual address of allocated memory block on success, NULL on failure.
*/
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:08:04 +00:00
static void * __init memblock_alloc_internal(
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
phys_addr_t size, phys_addr_t align,
phys_addr_t min_addr, phys_addr_t max_addr,
int nid, bool exact_nid)
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
{
phys_addr_t alloc;
/*
* Detect any accidental use of these APIs after slab is ready, as at
* this moment memblock may be deinitialized already and its
memblock: rename free_all_bootmem to memblock_free_all The conversion is done using sed -i 's@free_all_bootmem@memblock_free_all@' \ $(git grep -l free_all_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:30 +00:00
* internal data may be destroyed (after execution of memblock_free_all)
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
*/
if (WARN_ON_ONCE(slab_is_available()))
return kzalloc_node(size, GFP_NOWAIT, nid);
mm: memblock: do not enforce current limit for memblock_phys* family Until commit 92d12f9544b7 ("memblock: refactor internal allocation functions") the maximal address for memblock allocations was forced to memblock.current_limit only for the allocation functions returning virtual address. The changes introduced by that commit moved the limit enforcement into the allocation core and as a result the allocation functions returning physical address also started to limit allocations to memblock.current_limit. This caused breakage of etnaviv GPU driver: etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 etnaviv-gpu 130000.gpu: command buffer outside valid memory window etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 etnaviv-gpu 134000.gpu: command buffer outside valid memory window etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 Restore the behaviour of memblock_phys* family so that these functions will not enforce memblock.current_limit. Link: http://lkml.kernel.org/r/1570915861-17633-1-git-send-email-rppt@kernel.org Fixes: 92d12f9544b7 ("memblock: refactor internal allocation functions") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reported-by: Adam Ford <aford173@gmail.com> Tested-by: Adam Ford <aford173@gmail.com> [imx6q-logicpd] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 03:20:01 +00:00
if (max_addr > memblock.current_limit)
max_addr = memblock.current_limit;
alloc = memblock_alloc_range_nid(size, align, min_addr, max_addr, nid,
exact_nid);
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
/* retry allocation without lower limit */
if (!alloc && min_addr)
alloc = memblock_alloc_range_nid(size, align, 0, max_addr, nid,
exact_nid);
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
if (!alloc)
return NULL;
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
memblock: refactor internal allocation functions Currently, memblock has several internal functions with overlapping functionality. They all call memblock_find_in_range_node() to find free memory and then reserve the allocated range and mark it with kmemleak. However, there is difference in the allocation constraints and in fallback strategies. The allocations returning physical address first attempt to find free memory on the specified node within mirrored memory regions, then retry on the same node without the requirement for memory mirroring and finally fall back to all available memory. The allocations returning virtual address start with clamping the allowed range to memblock.current_limit, attempt to allocate from the specified node from regions with mirroring and with user defined minimal address. If such allocation fails, next attempt is done with node restriction lifted. Next, the allocation is retried with minimal address reset to zero and at last without the requirement for mirrored regions. Let's consolidate various fallbacks handling and make them more consistent for physical and virtual variants. Most of the fallback handling is moved to memblock_alloc_range_nid() and it now handles node and mirror fallbacks. The memblock_alloc_internal() uses memblock_alloc_range_nid() to get a physical address of the allocated range and converts it to virtual address. The fallback for allocation below the specified minimal address remains in memblock_alloc_internal() because memblock_alloc_range_nid() is used by CMA with exact requirement for lower bounds. The memblock_phys_alloc_nid() function is completely dropped as it is not used anywhere outside memblock and its only usage can be replaced by a call to memblock_alloc_range_nid(). [rppt@linux.ibm.com: fix parameter order in memblock_phys_alloc_try_nid()] Link: http://lkml.kernel.org/r/20190203113915.GC8620@rapoport-lnx Link: http://lkml.kernel.org/r/1548057848-15136-11-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:29:41 +00:00
return phys_to_virt(alloc);
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
}
/**
* memblock_alloc_exact_nid_raw - allocate boot memory block on the exact node
* without zeroing memory
* @size: size of memory block to be allocated in bytes
* @align: alignment of the region and block's size
* @min_addr: the lower bound of the memory region from where the allocation
* is preferred (phys address)
* @max_addr: the upper bound of the memory region from where the allocation
* is preferred (phys address), or %MEMBLOCK_ALLOC_ACCESSIBLE to
* allocate only from memory limited by memblock.current_limit value
* @nid: nid of the free area to find, %NUMA_NO_NODE for any node
*
* Public function, provides additional debug information (including caller
* info), if enabled. Does not zero allocated memory.
*
* Return:
* Virtual address of allocated memory block on success, NULL on failure.
*/
void * __init memblock_alloc_exact_nid_raw(
phys_addr_t size, phys_addr_t align,
phys_addr_t min_addr, phys_addr_t max_addr,
int nid)
{
void *ptr;
memblock_dbg("%s: %llu bytes align=0x%llx nid=%d from=%pa max_addr=%pa %pS\n",
__func__, (u64)size, (u64)align, nid, &min_addr,
&max_addr, (void *)_RET_IP_);
ptr = memblock_alloc_internal(size, align,
min_addr, max_addr, nid, true);
if (ptr && size > 0)
page_init_poison(ptr, size);
return ptr;
}
mm: define memblock_virt_alloc_try_nid_raw * A new variant of memblock_virt_alloc_* allocations: memblock_virt_alloc_try_nid_raw() - Does not zero the allocated memory - Does not panic if request cannot be satisfied * optimize early system hash allocations Clients can call alloc_large_system_hash() with flag: HASH_ZERO to specify that memory that was allocated for system hash needs to be zeroed, otherwise the memory does not need to be zeroed, and client will initialize it. If memory does not need to be zero'd, call the new memblock_virt_alloc_raw() interface, and thus improve the boot performance. * debug for raw alloctor When CONFIG_DEBUG_VM is enabled, this patch sets all the memory that is returned by memblock_virt_alloc_try_nid_raw() to ones to ensure that no places excpect zeroed memory. Link: http://lkml.kernel.org/r/20171013173214.27300-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Tested-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:36:27 +00:00
/**
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:08:04 +00:00
* memblock_alloc_try_nid_raw - allocate boot memory block without zeroing
mm: define memblock_virt_alloc_try_nid_raw * A new variant of memblock_virt_alloc_* allocations: memblock_virt_alloc_try_nid_raw() - Does not zero the allocated memory - Does not panic if request cannot be satisfied * optimize early system hash allocations Clients can call alloc_large_system_hash() with flag: HASH_ZERO to specify that memory that was allocated for system hash needs to be zeroed, otherwise the memory does not need to be zeroed, and client will initialize it. If memory does not need to be zero'd, call the new memblock_virt_alloc_raw() interface, and thus improve the boot performance. * debug for raw alloctor When CONFIG_DEBUG_VM is enabled, this patch sets all the memory that is returned by memblock_virt_alloc_try_nid_raw() to ones to ensure that no places excpect zeroed memory. Link: http://lkml.kernel.org/r/20171013173214.27300-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Tested-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:36:27 +00:00
* memory and without panicking
* @size: size of memory block to be allocated in bytes
* @align: alignment of the region and block's size
* @min_addr: the lower bound of the memory region from where the allocation
* is preferred (phys address)
* @max_addr: the upper bound of the memory region from where the allocation
memblock: replace BOOTMEM_ALLOC_* with MEMBLOCK variants Drop BOOTMEM_ALLOC_ACCESSIBLE and BOOTMEM_ALLOC_ANYWHERE in favor of identical MEMBLOCK definitions. Link: http://lkml.kernel.org/r/1536927045-23536-29-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:44 +00:00
* is preferred (phys address), or %MEMBLOCK_ALLOC_ACCESSIBLE to
mm: define memblock_virt_alloc_try_nid_raw * A new variant of memblock_virt_alloc_* allocations: memblock_virt_alloc_try_nid_raw() - Does not zero the allocated memory - Does not panic if request cannot be satisfied * optimize early system hash allocations Clients can call alloc_large_system_hash() with flag: HASH_ZERO to specify that memory that was allocated for system hash needs to be zeroed, otherwise the memory does not need to be zeroed, and client will initialize it. If memory does not need to be zero'd, call the new memblock_virt_alloc_raw() interface, and thus improve the boot performance. * debug for raw alloctor When CONFIG_DEBUG_VM is enabled, this patch sets all the memory that is returned by memblock_virt_alloc_try_nid_raw() to ones to ensure that no places excpect zeroed memory. Link: http://lkml.kernel.org/r/20171013173214.27300-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Tested-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:36:27 +00:00
* allocate only from memory limited by memblock.current_limit value
* @nid: nid of the free area to find, %NUMA_NO_NODE for any node
*
* Public function, provides additional debug information (including caller
* info), if enabled. Does not zero allocated memory, does not panic if request
* cannot be satisfied.
*
* Return:
mm: define memblock_virt_alloc_try_nid_raw * A new variant of memblock_virt_alloc_* allocations: memblock_virt_alloc_try_nid_raw() - Does not zero the allocated memory - Does not panic if request cannot be satisfied * optimize early system hash allocations Clients can call alloc_large_system_hash() with flag: HASH_ZERO to specify that memory that was allocated for system hash needs to be zeroed, otherwise the memory does not need to be zeroed, and client will initialize it. If memory does not need to be zero'd, call the new memblock_virt_alloc_raw() interface, and thus improve the boot performance. * debug for raw alloctor When CONFIG_DEBUG_VM is enabled, this patch sets all the memory that is returned by memblock_virt_alloc_try_nid_raw() to ones to ensure that no places excpect zeroed memory. Link: http://lkml.kernel.org/r/20171013173214.27300-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Tested-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:36:27 +00:00
* Virtual address of allocated memory block on success, NULL on failure.
*/
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:08:04 +00:00
void * __init memblock_alloc_try_nid_raw(
mm: define memblock_virt_alloc_try_nid_raw * A new variant of memblock_virt_alloc_* allocations: memblock_virt_alloc_try_nid_raw() - Does not zero the allocated memory - Does not panic if request cannot be satisfied * optimize early system hash allocations Clients can call alloc_large_system_hash() with flag: HASH_ZERO to specify that memory that was allocated for system hash needs to be zeroed, otherwise the memory does not need to be zeroed, and client will initialize it. If memory does not need to be zero'd, call the new memblock_virt_alloc_raw() interface, and thus improve the boot performance. * debug for raw alloctor When CONFIG_DEBUG_VM is enabled, this patch sets all the memory that is returned by memblock_virt_alloc_try_nid_raw() to ones to ensure that no places excpect zeroed memory. Link: http://lkml.kernel.org/r/20171013173214.27300-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Tested-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:36:27 +00:00
phys_addr_t size, phys_addr_t align,
phys_addr_t min_addr, phys_addr_t max_addr,
int nid)
{
void *ptr;
2019-03-25 19:32:28 +00:00
memblock_dbg("%s: %llu bytes align=0x%llx nid=%d from=%pa max_addr=%pa %pS\n",
__func__, (u64)size, (u64)align, nid, &min_addr,
&max_addr, (void *)_RET_IP_);
mm: define memblock_virt_alloc_try_nid_raw * A new variant of memblock_virt_alloc_* allocations: memblock_virt_alloc_try_nid_raw() - Does not zero the allocated memory - Does not panic if request cannot be satisfied * optimize early system hash allocations Clients can call alloc_large_system_hash() with flag: HASH_ZERO to specify that memory that was allocated for system hash needs to be zeroed, otherwise the memory does not need to be zeroed, and client will initialize it. If memory does not need to be zero'd, call the new memblock_virt_alloc_raw() interface, and thus improve the boot performance. * debug for raw alloctor When CONFIG_DEBUG_VM is enabled, this patch sets all the memory that is returned by memblock_virt_alloc_try_nid_raw() to ones to ensure that no places excpect zeroed memory. Link: http://lkml.kernel.org/r/20171013173214.27300-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Tested-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:36:27 +00:00
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:08:04 +00:00
ptr = memblock_alloc_internal(size, align,
min_addr, max_addr, nid, false);
mm: define memblock_virt_alloc_try_nid_raw * A new variant of memblock_virt_alloc_* allocations: memblock_virt_alloc_try_nid_raw() - Does not zero the allocated memory - Does not panic if request cannot be satisfied * optimize early system hash allocations Clients can call alloc_large_system_hash() with flag: HASH_ZERO to specify that memory that was allocated for system hash needs to be zeroed, otherwise the memory does not need to be zeroed, and client will initialize it. If memory does not need to be zero'd, call the new memblock_virt_alloc_raw() interface, and thus improve the boot performance. * debug for raw alloctor When CONFIG_DEBUG_VM is enabled, this patch sets all the memory that is returned by memblock_virt_alloc_try_nid_raw() to ones to ensure that no places excpect zeroed memory. Link: http://lkml.kernel.org/r/20171013173214.27300-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Tested-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:36:27 +00:00
if (ptr && size > 0)
mm: provide kernel parameter to allow disabling page init poisoning Patch series "Address issues slowing persistent memory initialization", v5. The main thing this patch set achieves is that it allows us to initialize each node worth of persistent memory independently. As a result we reduce page init time by about 2 minutes because instead of taking 30 to 40 seconds per node and going through each node one at a time, we process all 4 nodes in parallel in the case of a 12TB persistent memory setup spread evenly over 4 nodes. This patch (of 3): On systems with a large amount of memory it can take a significant amount of time to initialize all of the page structs with the PAGE_POISON_PATTERN value. I have seen it take over 2 minutes to initialize a system with over 12TB of RAM. In order to work around the issue I had to disable CONFIG_DEBUG_VM and then the boot time returned to something much more reasonable as the arch_add_memory call completed in milliseconds versus seconds. However in doing that I had to disable all of the other VM debugging on the system. In order to work around a kernel that might have CONFIG_DEBUG_VM enabled on a system that has a large amount of memory I have added a new kernel parameter named "vm_debug" that can be set to "-" in order to disable it. Link: http://lkml.kernel.org/r/20180925201921.3576.84239.stgit@localhost.localdomain Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 22:07:45 +00:00
page_init_poison(ptr, size);
mm: define memblock_virt_alloc_try_nid_raw * A new variant of memblock_virt_alloc_* allocations: memblock_virt_alloc_try_nid_raw() - Does not zero the allocated memory - Does not panic if request cannot be satisfied * optimize early system hash allocations Clients can call alloc_large_system_hash() with flag: HASH_ZERO to specify that memory that was allocated for system hash needs to be zeroed, otherwise the memory does not need to be zeroed, and client will initialize it. If memory does not need to be zero'd, call the new memblock_virt_alloc_raw() interface, and thus improve the boot performance. * debug for raw alloctor When CONFIG_DEBUG_VM is enabled, this patch sets all the memory that is returned by memblock_virt_alloc_try_nid_raw() to ones to ensure that no places excpect zeroed memory. Link: http://lkml.kernel.org/r/20171013173214.27300-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Tested-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:36:27 +00:00
return ptr;
}
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
/**
memblock: memblock_alloc_try_nid: don't panic As all the memblock_alloc*() users are now checking the return value and panic() in case of error, the panic() call can be removed from the core memblock allocator, namely memblock_alloc_try_nid(). Link: http://lkml.kernel.org/r/1548057848-15136-21-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:30:37 +00:00
* memblock_alloc_try_nid - allocate boot memory block
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
* @size: size of memory block to be allocated in bytes
* @align: alignment of the region and block's size
* @min_addr: the lower bound of the memory region from where the allocation
* is preferred (phys address)
* @max_addr: the upper bound of the memory region from where the allocation
memblock: replace BOOTMEM_ALLOC_* with MEMBLOCK variants Drop BOOTMEM_ALLOC_ACCESSIBLE and BOOTMEM_ALLOC_ANYWHERE in favor of identical MEMBLOCK definitions. Link: http://lkml.kernel.org/r/1536927045-23536-29-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:44 +00:00
* is preferred (phys address), or %MEMBLOCK_ALLOC_ACCESSIBLE to
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
* allocate only from memory limited by memblock.current_limit value
* @nid: nid of the free area to find, %NUMA_NO_NODE for any node
*
memblock: memblock_alloc_try_nid: don't panic As all the memblock_alloc*() users are now checking the return value and panic() in case of error, the panic() call can be removed from the core memblock allocator, namely memblock_alloc_try_nid(). Link: http://lkml.kernel.org/r/1548057848-15136-21-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:30:37 +00:00
* Public function, provides additional debug information (including caller
* info), if enabled. This function zeroes the allocated memory.
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
*
* Return:
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
* Virtual address of allocated memory block on success, NULL on failure.
*/
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:08:04 +00:00
void * __init memblock_alloc_try_nid(
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
phys_addr_t size, phys_addr_t align,
phys_addr_t min_addr, phys_addr_t max_addr,
int nid)
{
void *ptr;
2019-03-25 19:32:28 +00:00
memblock_dbg("%s: %llu bytes align=0x%llx nid=%d from=%pa max_addr=%pa %pS\n",
__func__, (u64)size, (u64)align, nid, &min_addr,
&max_addr, (void *)_RET_IP_);
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:08:04 +00:00
ptr = memblock_alloc_internal(size, align,
min_addr, max_addr, nid, false);
memblock: memblock_alloc_try_nid: don't panic As all the memblock_alloc*() users are now checking the return value and panic() in case of error, the panic() call can be removed from the core memblock allocator, namely memblock_alloc_try_nid(). Link: http://lkml.kernel.org/r/1548057848-15136-21-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:30:37 +00:00
if (ptr)
mm: define memblock_virt_alloc_try_nid_raw * A new variant of memblock_virt_alloc_* allocations: memblock_virt_alloc_try_nid_raw() - Does not zero the allocated memory - Does not panic if request cannot be satisfied * optimize early system hash allocations Clients can call alloc_large_system_hash() with flag: HASH_ZERO to specify that memory that was allocated for system hash needs to be zeroed, otherwise the memory does not need to be zeroed, and client will initialize it. If memory does not need to be zero'd, call the new memblock_virt_alloc_raw() interface, and thus improve the boot performance. * debug for raw alloctor When CONFIG_DEBUG_VM is enabled, this patch sets all the memory that is returned by memblock_virt_alloc_try_nid_raw() to ones to ensure that no places excpect zeroed memory. Link: http://lkml.kernel.org/r/20171013173214.27300-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Tested-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:36:27 +00:00
memset(ptr, 0, size);
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
memblock: memblock_alloc_try_nid: don't panic As all the memblock_alloc*() users are now checking the return value and panic() in case of error, the panic() call can be removed from the core memblock allocator, namely memblock_alloc_try_nid(). Link: http://lkml.kernel.org/r/1548057848-15136-21-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 06:30:37 +00:00
return ptr;
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
}
/**
* __memblock_free_late - free pages directly to buddy allocator
* @base: phys starting address of the boot memory block
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
* @size: size of the boot memory block in bytes
*
* This is only useful when the memblock allocator has already been torn
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
* down, but we are still initializing the system. Pages are released directly
* to the buddy allocator.
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
*/
void __init __memblock_free_late(phys_addr_t base, phys_addr_t size)
{
phys_addr_t cursor, end;
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
end = base + size - 1;
2019-03-25 19:32:28 +00:00
memblock_dbg("%s: [%pa-%pa] %pS\n",
__func__, &base, &end, (void *)_RET_IP_);
kmemleak_free_part_phys(base, size);
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
cursor = PFN_UP(base);
end = PFN_DOWN(base + size);
for (; cursor < end; cursor++) {
memblock: rename __free_pages_bootmem to memblock_free_pages The conversion is done using sed -i 's@__free_pages_bootmem@memblock_free_pages@' \ $(git grep -l __free_pages_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-27-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:36 +00:00
memblock_free_pages(pfn_to_page(cursor), cursor, 0);
totalram_pages_inc();
mm/memblock: add memblock memory allocation apis Introduce memblock memory allocation APIs which allow to support PAE or LPAE extension on 32 bits archs where the physical memory start address can be beyond 4GB. In such cases, existing bootmem APIs which operate on 32 bit addresses won't work and needs memblock layer which operates on 64 bit addresses. So we add equivalent APIs so that we can replace usage of bootmem with memblock interfaces. Architectures already converted to NO_BOOTMEM use these new memblock interfaces. The architectures which are still not converted to NO_BOOTMEM continue to function as is because we still maintain the fal lback option of bootmem back-end supporting these new interfaces. So no functional change as such. In long run, once all the architectures moves to NO_BOOTMEM, we can get rid of bootmem layer completely. This is one step to remove the core code dependency with bootmem and also gives path for architectures to move away from bootmem. The proposed interface will became active if both CONFIG_HAVE_MEMBLOCK and CONFIG_NO_BOOTMEM are specified by arch. In case !CONFIG_NO_BOOTMEM, the memblock() wrappers will fallback to the existing bootmem apis so that arch's not converted to NO_BOOTMEM continue to work as is. The meaning of MEMBLOCK_ALLOC_ACCESSIBLE and MEMBLOCK_ALLOC_ANYWHERE is kept same. [akpm@linux-foundation.org: s/depricated/deprecated/] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:50:19 +00:00
}
}
/*
* Remaining API functions
*/
phys_addr_t __init_memblock memblock_phys_mem_size(void)
{
return memblock.memory.total_size;
}
phys_addr_t __init_memblock memblock_reserved_size(void)
{
return memblock.reserved.total_size;
}
phys_addr_t __init memblock_mem_size(unsigned long limit_pfn)
{
unsigned long pages = 0;
struct memblock_region *r;
unsigned long start_pfn, end_pfn;
for_each_memblock(memory, r) {
start_pfn = memblock_region_memory_base_pfn(r);
end_pfn = memblock_region_memory_end_pfn(r);
start_pfn = min_t(unsigned long, start_pfn, limit_pfn);
end_pfn = min_t(unsigned long, end_pfn, limit_pfn);
pages += end_pfn - start_pfn;
}
return PFN_PHYS(pages);
}
/* lowest address */
phys_addr_t __init_memblock memblock_start_of_DRAM(void)
{
return memblock.memory.regions[0].base;
}
phys_addr_t __init_memblock memblock_end_of_DRAM(void)
{
int idx = memblock.memory.cnt - 1;
return (memblock.memory.regions[idx].base + memblock.memory.regions[idx].size);
}
mm/memblock.c: add new infrastructure to address the mem limit issue In some cases, memblock is queried by kernel to determine whether a specified address is RAM or not. For example, the ACPI core needs this information to determine which attributes to use when mapping ACPI regions(acpi_os_ioremap). Use of incorrect memory types can result in faults, data corruption, or other issues. Removing memory with memblock_enforce_memory_limit() throws away this information, and so a kernel booted with 'mem=' may suffer from the issues described above. To avoid this, we need to keep those NOMAP regions instead of removing all above the limit, which preserves the information we need while preventing other use of those regions. This patch adds new infrastructure to retain all NOMAP memblock regions while removing others, to cater for this. Link: http://lkml.kernel.org/r/1468475036-5852-2-git-send-email-dennis.chen@arm.com Signed-off-by: Dennis Chen <dennis.chen@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Kaly Xin <kaly.xin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 22:48:26 +00:00
static phys_addr_t __init_memblock __find_max_addr(phys_addr_t limit)
{
phys_addr_t max_addr = PHYS_ADDR_MAX;
struct memblock_region *r;
mm/memblock.c: add new infrastructure to address the mem limit issue In some cases, memblock is queried by kernel to determine whether a specified address is RAM or not. For example, the ACPI core needs this information to determine which attributes to use when mapping ACPI regions(acpi_os_ioremap). Use of incorrect memory types can result in faults, data corruption, or other issues. Removing memory with memblock_enforce_memory_limit() throws away this information, and so a kernel booted with 'mem=' may suffer from the issues described above. To avoid this, we need to keep those NOMAP regions instead of removing all above the limit, which preserves the information we need while preventing other use of those regions. This patch adds new infrastructure to retain all NOMAP memblock regions while removing others, to cater for this. Link: http://lkml.kernel.org/r/1468475036-5852-2-git-send-email-dennis.chen@arm.com Signed-off-by: Dennis Chen <dennis.chen@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Kaly Xin <kaly.xin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 22:48:26 +00:00
/*
* translate the memory @limit size into the max address within one of
* the memory memblock regions, if the @limit exceeds the total size
* of those regions, max_addr will keep original value PHYS_ADDR_MAX
mm/memblock.c: add new infrastructure to address the mem limit issue In some cases, memblock is queried by kernel to determine whether a specified address is RAM or not. For example, the ACPI core needs this information to determine which attributes to use when mapping ACPI regions(acpi_os_ioremap). Use of incorrect memory types can result in faults, data corruption, or other issues. Removing memory with memblock_enforce_memory_limit() throws away this information, and so a kernel booted with 'mem=' may suffer from the issues described above. To avoid this, we need to keep those NOMAP regions instead of removing all above the limit, which preserves the information we need while preventing other use of those regions. This patch adds new infrastructure to retain all NOMAP memblock regions while removing others, to cater for this. Link: http://lkml.kernel.org/r/1468475036-5852-2-git-send-email-dennis.chen@arm.com Signed-off-by: Dennis Chen <dennis.chen@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Kaly Xin <kaly.xin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 22:48:26 +00:00
*/
for_each_memblock(memory, r) {
if (limit <= r->size) {
max_addr = r->base + limit;
break;
}
limit -= r->size;
}
mm/memblock.c: add new infrastructure to address the mem limit issue In some cases, memblock is queried by kernel to determine whether a specified address is RAM or not. For example, the ACPI core needs this information to determine which attributes to use when mapping ACPI regions(acpi_os_ioremap). Use of incorrect memory types can result in faults, data corruption, or other issues. Removing memory with memblock_enforce_memory_limit() throws away this information, and so a kernel booted with 'mem=' may suffer from the issues described above. To avoid this, we need to keep those NOMAP regions instead of removing all above the limit, which preserves the information we need while preventing other use of those regions. This patch adds new infrastructure to retain all NOMAP memblock regions while removing others, to cater for this. Link: http://lkml.kernel.org/r/1468475036-5852-2-git-send-email-dennis.chen@arm.com Signed-off-by: Dennis Chen <dennis.chen@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Kaly Xin <kaly.xin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 22:48:26 +00:00
return max_addr;
}
void __init memblock_enforce_memory_limit(phys_addr_t limit)
{
phys_addr_t max_addr;
mm/memblock.c: add new infrastructure to address the mem limit issue In some cases, memblock is queried by kernel to determine whether a specified address is RAM or not. For example, the ACPI core needs this information to determine which attributes to use when mapping ACPI regions(acpi_os_ioremap). Use of incorrect memory types can result in faults, data corruption, or other issues. Removing memory with memblock_enforce_memory_limit() throws away this information, and so a kernel booted with 'mem=' may suffer from the issues described above. To avoid this, we need to keep those NOMAP regions instead of removing all above the limit, which preserves the information we need while preventing other use of those regions. This patch adds new infrastructure to retain all NOMAP memblock regions while removing others, to cater for this. Link: http://lkml.kernel.org/r/1468475036-5852-2-git-send-email-dennis.chen@arm.com Signed-off-by: Dennis Chen <dennis.chen@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Kaly Xin <kaly.xin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 22:48:26 +00:00
if (!limit)
return;
max_addr = __find_max_addr(limit);
/* @limit exceeds the total size of the memory, do nothing */
if (max_addr == PHYS_ADDR_MAX)
mm/memblock.c: add new infrastructure to address the mem limit issue In some cases, memblock is queried by kernel to determine whether a specified address is RAM or not. For example, the ACPI core needs this information to determine which attributes to use when mapping ACPI regions(acpi_os_ioremap). Use of incorrect memory types can result in faults, data corruption, or other issues. Removing memory with memblock_enforce_memory_limit() throws away this information, and so a kernel booted with 'mem=' may suffer from the issues described above. To avoid this, we need to keep those NOMAP regions instead of removing all above the limit, which preserves the information we need while preventing other use of those regions. This patch adds new infrastructure to retain all NOMAP memblock regions while removing others, to cater for this. Link: http://lkml.kernel.org/r/1468475036-5852-2-git-send-email-dennis.chen@arm.com Signed-off-by: Dennis Chen <dennis.chen@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Kaly Xin <kaly.xin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 22:48:26 +00:00
return;
/* truncate both memory and reserved regions */
memblock_remove_range(&memblock.memory, max_addr,
PHYS_ADDR_MAX);
memblock_remove_range(&memblock.reserved, max_addr,
PHYS_ADDR_MAX);
}
void __init memblock_cap_memory_range(phys_addr_t base, phys_addr_t size)
{
int start_rgn, end_rgn;
int i, ret;
if (!size)
return;
ret = memblock_isolate_range(&memblock.memory, base, size,
&start_rgn, &end_rgn);
if (ret)
return;
/* remove all the MAP regions */
for (i = memblock.memory.cnt - 1; i >= end_rgn; i--)
if (!memblock_is_nomap(&memblock.memory.regions[i]))
memblock_remove_region(&memblock.memory, i);
for (i = start_rgn - 1; i >= 0; i--)
if (!memblock_is_nomap(&memblock.memory.regions[i]))
memblock_remove_region(&memblock.memory, i);
/* truncate the reserved regions */
memblock_remove_range(&memblock.reserved, 0, base);
memblock_remove_range(&memblock.reserved,
base + size, PHYS_ADDR_MAX);
}
mm/memblock.c: add new infrastructure to address the mem limit issue In some cases, memblock is queried by kernel to determine whether a specified address is RAM or not. For example, the ACPI core needs this information to determine which attributes to use when mapping ACPI regions(acpi_os_ioremap). Use of incorrect memory types can result in faults, data corruption, or other issues. Removing memory with memblock_enforce_memory_limit() throws away this information, and so a kernel booted with 'mem=' may suffer from the issues described above. To avoid this, we need to keep those NOMAP regions instead of removing all above the limit, which preserves the information we need while preventing other use of those regions. This patch adds new infrastructure to retain all NOMAP memblock regions while removing others, to cater for this. Link: http://lkml.kernel.org/r/1468475036-5852-2-git-send-email-dennis.chen@arm.com Signed-off-by: Dennis Chen <dennis.chen@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Kaly Xin <kaly.xin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 22:48:26 +00:00
void __init memblock_mem_limit_remove_map(phys_addr_t limit)
{
phys_addr_t max_addr;
if (!limit)
return;
max_addr = __find_max_addr(limit);
/* @limit exceeds the total size of the memory, do nothing */
if (max_addr == PHYS_ADDR_MAX)
mm/memblock.c: add new infrastructure to address the mem limit issue In some cases, memblock is queried by kernel to determine whether a specified address is RAM or not. For example, the ACPI core needs this information to determine which attributes to use when mapping ACPI regions(acpi_os_ioremap). Use of incorrect memory types can result in faults, data corruption, or other issues. Removing memory with memblock_enforce_memory_limit() throws away this information, and so a kernel booted with 'mem=' may suffer from the issues described above. To avoid this, we need to keep those NOMAP regions instead of removing all above the limit, which preserves the information we need while preventing other use of those regions. This patch adds new infrastructure to retain all NOMAP memblock regions while removing others, to cater for this. Link: http://lkml.kernel.org/r/1468475036-5852-2-git-send-email-dennis.chen@arm.com Signed-off-by: Dennis Chen <dennis.chen@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Kaly Xin <kaly.xin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 22:48:26 +00:00
return;
memblock_cap_memory_range(0, max_addr);
mm/memblock.c: add new infrastructure to address the mem limit issue In some cases, memblock is queried by kernel to determine whether a specified address is RAM or not. For example, the ACPI core needs this information to determine which attributes to use when mapping ACPI regions(acpi_os_ioremap). Use of incorrect memory types can result in faults, data corruption, or other issues. Removing memory with memblock_enforce_memory_limit() throws away this information, and so a kernel booted with 'mem=' may suffer from the issues described above. To avoid this, we need to keep those NOMAP regions instead of removing all above the limit, which preserves the information we need while preventing other use of those regions. This patch adds new infrastructure to retain all NOMAP memblock regions while removing others, to cater for this. Link: http://lkml.kernel.org/r/1468475036-5852-2-git-send-email-dennis.chen@arm.com Signed-off-by: Dennis Chen <dennis.chen@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Kaly Xin <kaly.xin@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 22:48:26 +00:00
}
static int __init_memblock memblock_search(struct memblock_type *type, phys_addr_t addr)
{
unsigned int left = 0, right = type->cnt;
do {
unsigned int mid = (right + left) / 2;
if (addr < type->regions[mid].base)
right = mid;
else if (addr >= (type->regions[mid].base +
type->regions[mid].size))
left = mid + 1;
else
return mid;
} while (left < right);
return -1;
}
bool __init_memblock memblock_is_reserved(phys_addr_t addr)
{
return memblock_search(&memblock.reserved, addr) != -1;
}
bool __init_memblock memblock_is_memory(phys_addr_t addr)
{
return memblock_search(&memblock.memory, addr) != -1;
}
bool __init_memblock memblock_is_map_memory(phys_addr_t addr)
{
int i = memblock_search(&memblock.memory, addr);
if (i == -1)
return false;
return !memblock_is_nomap(&memblock.memory.regions[i]);
}
int __init_memblock memblock_search_pfn_nid(unsigned long pfn,
unsigned long *start_pfn, unsigned long *end_pfn)
{
struct memblock_type *type = &memblock.memory;
int mid = memblock_search(type, PFN_PHYS(pfn));
if (mid == -1)
return -1;
*start_pfn = PFN_DOWN(type->regions[mid].base);
*end_pfn = PFN_DOWN(type->regions[mid].base + type->regions[mid].size);
mm: memblock: replace dereferences of memblock_region.nid with API calls Patch series "mm: rework free_area_init*() funcitons". After the discussion [1] about removal of CONFIG_NODES_SPAN_OTHER_NODES and CONFIG_HAVE_MEMBLOCK_NODE_MAP options, I took it a bit further and updated the node/zone initialization. Since all architectures have memblock, it is possible to use only the newer version of free_area_init_node() that calculates the zone and node boundaries based on memblock node mapping and architectural limits on possible zone PFNs. The architectures that still determined zone and hole sizes can be switched to the generic code and the old code that took those zone and hole sizes can be simply removed. And, since it all started from the removal of CONFIG_NODES_SPAN_OTHER_NODES, the memmap_init() is now updated to iterate over memblocks and so it does not need to perform early_pfn_to_nid() query for every PFN. [1] https://lore.kernel.org/lkml/1585420282-25630-1-git-send-email-Hoan@os.amperecomputing.com This patch (of 21): There are several places in the code that directly dereference memblock_region.nid despite this field being defined only when CONFIG_HAVE_MEMBLOCK_NODE_MAP=y. Replace these with calls to memblock_get_region_nid() to improve code robustness and to avoid possible breakage when CONFIG_HAVE_MEMBLOCK_NODE_MAP will be removed. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200412194859.12663-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:56:53 +00:00
return memblock_get_region_node(&type->regions[mid]);
}
/**
* memblock_is_region_memory - check if a region is a subset of memory
* @base: base of region to check
* @size: size of region to check
*
* Check if the region [@base, @base + @size) is a subset of a memory block.
*
* Return:
* 0 if false, non-zero if true
*/
bool __init_memblock memblock_is_region_memory(phys_addr_t base, phys_addr_t size)
{
int idx = memblock_search(&memblock.memory, base);
phys_addr_t end = base + memblock_cap_size(base, &size);
if (idx == -1)
return false;
return (memblock.memory.regions[idx].base +
memblock.memory.regions[idx].size) >= end;
}
/**
* memblock_is_region_reserved - check if a region intersects reserved memory
* @base: base of region to check
* @size: size of region to check
*
* Check if the region [@base, @base + @size) intersects a reserved
* memory block.
*
* Return:
* True if they intersect, false if not.
*/
bool __init_memblock memblock_is_region_reserved(phys_addr_t base, phys_addr_t size)
{
memblock_cap_size(base, &size);
return memblock_overlaps_region(&memblock.reserved, base, size);
}
void __init_memblock memblock_trim_memory(phys_addr_t align)
{
phys_addr_t start, end, orig_start, orig_end;
struct memblock_region *r;
for_each_memblock(memory, r) {
orig_start = r->base;
orig_end = r->base + r->size;
start = round_up(orig_start, align);
end = round_down(orig_end, align);
if (start == orig_start && end == orig_end)
continue;
if (start < end) {
r->base = start;
r->size = end - start;
} else {
memblock_remove_region(&memblock.memory,
r - memblock.memory.regions);
r--;
}
}
}
void __init_memblock memblock_set_current_limit(phys_addr_t limit)
{
memblock.current_limit = limit;
}
phys_addr_t __init_memblock memblock_get_current_limit(void)
{
return memblock.current_limit;
}
static void __init_memblock memblock_dump(struct memblock_type *type)
{
phys_addr_t base, end, size;
enum memblock_flags flags;
int idx;
struct memblock_region *rgn;
pr_info(" %s.cnt = 0x%lx\n", type->name, type->cnt);
for_each_memblock_type(idx, type, rgn) {
char nid_buf[32] = "";
base = rgn->base;
size = rgn->size;
end = base + size - 1;
memblock, numa: introduce flags field into memblock There is no flag in memblock to describe what type the memory is. Sometimes, we may use memblock to reserve some memory for special usage. And we want to know what kind of memory it is. So we need a way to In hotplug environment, we want to reserve hotpluggable memory so the kernel won't be able to use it. And when the system is up, we have to free these hotpluggable memory to buddy. So we need to mark these memory first. In order to do so, we need to mark out these special memory in memblock. In this patch, we introduce a new "flags" member into memblock_region: struct memblock_region { phys_addr_t base; phys_addr_t size; unsigned long flags; /* This is new. */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP int nid; #endif }; This patch does the following things: 1) Add "flags" member to memblock_region. 2) Modify the following APIs' prototype: memblock_add_region() memblock_insert_region() 3) Add memblock_reserve_region() to support reserve memory with flags, and keep memblock_reserve()'s prototype unmodified. 4) Modify other APIs to support flags, but keep their prototype unmodified. The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>. Suggested-by: Wen Congyang <wency@cn.fujitsu.com> Suggested-by: Liu Jiang <jiang.liu@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 23:49:20 +00:00
flags = rgn->flags;
mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of nodes and zones structures between the systems that have region to node mapping in memblock and those that don't. Currently all the NUMA architectures enable this option and for the non-NUMA systems we can presume that all the memory belongs to node 0 and therefore the compile time configuration option is not required. The remaining few architectures that use DISCONTIGMEM without NUMA are easily updated to use memblock_add_node() instead of memblock_add() and thus have proper correspondence of memblock regions to NUMA nodes. Still, free_area_init_node() must have a backward compatible version because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is different. Once all the architectures will use the new semantics, the entire compatibility layer can be dropped. To avoid addition of extra run time memory to store node id for architectures that keep memblock but have only a single node, the node id field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and the corresponding accessors presume that in those cases it is always 0. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 22:57:02 +00:00
#ifdef CONFIG_NEED_MULTIPLE_NODES
if (memblock_get_region_node(rgn) != MAX_NUMNODES)
snprintf(nid_buf, sizeof(nid_buf), " on node %d",
memblock_get_region_node(rgn));
#endif
pr_info(" %s[%#x]\t[%pa-%pa], %pa bytes%s flags: %#x\n",
type->name, idx, &base, &end, &size, nid_buf, flags);
}
}
void __init_memblock __memblock_dump_all(void)
{
pr_info("MEMBLOCK configuration:\n");
pr_info(" memory size = %pa reserved size = %pa\n",
&memblock.memory.total_size,
&memblock.reserved.total_size);
memblock_dump(&memblock.memory);
memblock_dump(&memblock.reserved);
#ifdef CONFIG_HAVE_MEMBLOCK_PHYS_MAP
mm/memblock: expose only miminal interface to add/walk physmem "physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-01 14:18:29 +00:00
memblock_dump(&physmem);
#endif
}
memblock: s/memblock_analyze()/memblock_allow_resize()/ and update users The only function of memblock_analyze() is now allowing resize of memblock region arrays. Rename it to memblock_allow_resize() and update its users. * The following users remain the same other than renaming. arm/mm/init.c::arm_memblock_init() microblaze/kernel/prom.c::early_init_devtree() powerpc/kernel/prom.c::early_init_devtree() openrisc/kernel/prom.c::early_init_devtree() sh/mm/init.c::paging_init() sparc/mm/init_64.c::paging_init() unicore32/mm/init.c::uc32_memblock_init() * In the following users, analyze was used to update total size which is no longer necessary. powerpc/kernel/machine_kexec.c::reserve_crashkernel() powerpc/kernel/prom.c::early_init_devtree() powerpc/mm/init_32.c::MMU_init() powerpc/mm/tlb_nohash.c::__early_init_mmu() powerpc/platforms/ps3/mm.c::ps3_mm_add_memory() powerpc/platforms/embedded6xx/wii.c::wii_memory_fixups() sh/kernel/machine_kexec.c::reserve_crashkernel() * x86/kernel/e820.c::memblock_x86_fill() was directly setting memblock_can_resize before populating memblock and calling analyze afterwards. Call memblock_allow_resize() before start populating. memblock_can_resize is now static inside memblock.c. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-12-08 18:22:08 +00:00
void __init memblock_allow_resize(void)
{
memblock_can_resize = 1;
}
static int __init early_memblock(char *p)
{
if (p && strstr(p, "debug"))
memblock_debug = 1;
return 0;
}
early_param("memblock", early_memblock);
mm: remove nobootmem Move a few remaining functions from nobootmem.c to memblock.c and remove nobootmem Link: http://lkml.kernel.org/r/1536927045-23536-28-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:40 +00:00
static void __init __free_pages_memory(unsigned long start, unsigned long end)
{
int order;
while (start < end) {
order = min(MAX_ORDER - 1UL, __ffs(start));
while (start + (1UL << order) > end)
order--;
memblock_free_pages(pfn_to_page(start), start, order);
start += (1UL << order);
}
}
static unsigned long __init __free_memory_core(phys_addr_t start,
phys_addr_t end)
{
unsigned long start_pfn = PFN_UP(start);
unsigned long end_pfn = min_t(unsigned long,
PFN_DOWN(end), max_low_pfn);
if (start_pfn >= end_pfn)
return 0;
__free_pages_memory(start_pfn, end_pfn);
return end_pfn - start_pfn;
}
static unsigned long __init free_low_memory_core_early(void)
{
unsigned long count = 0;
phys_addr_t start, end;
u64 i;
memblock_clear_hotplug(0, -1);
for_each_reserved_mem_region(i, &start, &end)
reserve_bootmem_region(start, end);
/*
* We need to use NUMA_NO_NODE instead of NODE_DATA(0)->node_id
* because in some case like Node0 doesn't have RAM installed
* low ram will be on Node1
*/
for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE, &start, &end,
NULL)
count += __free_memory_core(start, end);
return count;
}
static int reset_managed_pages_done __initdata;
void reset_node_managed_pages(pg_data_t *pgdat)
{
struct zone *z;
for (z = pgdat->node_zones; z < pgdat->node_zones + MAX_NR_ZONES; z++)
atomic_long_set(&z->managed_pages, 0);
mm: remove nobootmem Move a few remaining functions from nobootmem.c to memblock.c and remove nobootmem Link: http://lkml.kernel.org/r/1536927045-23536-28-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:40 +00:00
}
void __init reset_all_zones_managed_pages(void)
{
struct pglist_data *pgdat;
if (reset_managed_pages_done)
return;
for_each_online_pgdat(pgdat)
reset_node_managed_pages(pgdat);
reset_managed_pages_done = 1;
}
/**
* memblock_free_all - release free pages to the buddy allocator
*
* Return: the number of pages actually released.
*/
unsigned long __init memblock_free_all(void)
{
unsigned long pages;
reset_all_zones_managed_pages();
pages = free_low_memory_core_early();
totalram_pages_add(pages);
mm: remove nobootmem Move a few remaining functions from nobootmem.c to memblock.c and remove nobootmem Link: http://lkml.kernel.org/r/1536927045-23536-28-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:40 +00:00
return pages;
}
mm: memblock: make keeping memblock memory opt-in rather than opt-out Most architectures do not need the memblock memory after the page allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the arch Kconfig. Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the logic makes it clear which architectures actually use memblock after system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK to the architectures that are still missing that option. Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:22:59 +00:00
#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_ARCH_KEEP_MEMBLOCK)
static int memblock_debug_show(struct seq_file *m, void *private)
{
struct memblock_type *type = m->private;
struct memblock_region *reg;
int i;
phys_addr_t end;
for (i = 0; i < type->cnt; i++) {
reg = &type->regions[i];
end = reg->base + reg->size - 1;
seq_printf(m, "%4d: ", i);
seq_printf(m, "%pa..%pa\n", &reg->base, &end);
}
return 0;
}
DEFINE_SHOW_ATTRIBUTE(memblock_debug);
static int __init memblock_init_debugfs(void)
{
struct dentry *root = debugfs_create_dir("memblock", NULL);
debugfs_create_file("memory", 0444, root,
&memblock.memory, &memblock_debug_fops);
debugfs_create_file("reserved", 0444, root,
&memblock.reserved, &memblock_debug_fops);
#ifdef CONFIG_HAVE_MEMBLOCK_PHYS_MAP
mm/memblock: expose only miminal interface to add/walk physmem "physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-01 14:18:29 +00:00
debugfs_create_file("physmem", 0444, root, &physmem,
&memblock_debug_fops);
#endif
return 0;
}
__initcall(memblock_init_debugfs);
#endif /* CONFIG_DEBUG_FS */