License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2013-03-23 23:11:31 +00:00
|
|
|
/*
|
|
|
|
* bcache stats code
|
|
|
|
*
|
|
|
|
* Copyright 2012 Google, Inc.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "bcache.h"
|
|
|
|
#include "stats.h"
|
|
|
|
#include "btree.h"
|
|
|
|
#include "sysfs.h"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We keep absolute totals of various statistics, and addionally a set of three
|
|
|
|
* rolling averages.
|
|
|
|
*
|
|
|
|
* Every so often, a timer goes off and rescales the rolling averages.
|
|
|
|
* accounting_rescale[] is how many times the timer has to go off before we
|
|
|
|
* rescale each set of numbers; that gets us half lives of 5 minutes, one hour,
|
|
|
|
* and one day.
|
|
|
|
*
|
|
|
|
* accounting_delay is how often the timer goes off - 22 times in 5 minutes,
|
|
|
|
* and accounting_weight is what we use to rescale:
|
|
|
|
*
|
|
|
|
* pow(31 / 32, 22) ~= 1/2
|
|
|
|
*
|
|
|
|
* So that we don't have to increment each set of numbers every time we (say)
|
|
|
|
* get a cache hit, we increment a single atomic_t in acc->collector, and when
|
|
|
|
* the rescale function runs it resets the atomic counter to 0 and adds its
|
|
|
|
* old value to each of the exported numbers.
|
|
|
|
*
|
|
|
|
* To reduce rounding error, the numbers in struct cache_stats are all
|
|
|
|
* stored left shifted by 16, and scaled back in the sysfs show() function.
|
|
|
|
*/
|
|
|
|
|
2018-08-11 05:19:44 +00:00
|
|
|
static const unsigned int DAY_RESCALE = 288;
|
|
|
|
static const unsigned int HOUR_RESCALE = 12;
|
|
|
|
static const unsigned int FIVE_MINUTE_RESCALE = 1;
|
|
|
|
static const unsigned int accounting_delay = (HZ * 300) / 22;
|
|
|
|
static const unsigned int accounting_weight = 32;
|
2013-03-23 23:11:31 +00:00
|
|
|
|
|
|
|
/* sysfs reading/writing */
|
|
|
|
|
|
|
|
read_attribute(cache_hits);
|
|
|
|
read_attribute(cache_misses);
|
|
|
|
read_attribute(cache_bypass_hits);
|
|
|
|
read_attribute(cache_bypass_misses);
|
|
|
|
read_attribute(cache_hit_ratio);
|
|
|
|
read_attribute(cache_readaheads);
|
|
|
|
read_attribute(cache_miss_collisions);
|
|
|
|
read_attribute(bypassed);
|
|
|
|
|
|
|
|
SHOW(bch_stats)
|
|
|
|
{
|
|
|
|
struct cache_stats *s =
|
|
|
|
container_of(kobj, struct cache_stats, kobj);
|
|
|
|
#define var(stat) (s->stat >> 16)
|
|
|
|
var_print(cache_hits);
|
|
|
|
var_print(cache_misses);
|
|
|
|
var_print(cache_bypass_hits);
|
|
|
|
var_print(cache_bypass_misses);
|
|
|
|
|
|
|
|
sysfs_print(cache_hit_ratio,
|
|
|
|
DIV_SAFE(var(cache_hits) * 100,
|
|
|
|
var(cache_hits) + var(cache_misses)));
|
|
|
|
|
|
|
|
var_print(cache_readaheads);
|
|
|
|
var_print(cache_miss_collisions);
|
|
|
|
sysfs_hprint(bypassed, var(sectors_bypassed) << 9);
|
|
|
|
#undef var
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
STORE(bch_stats)
|
|
|
|
{
|
|
|
|
return size;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bch_stats_release(struct kobject *k)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct attribute *bch_stats_files[] = {
|
|
|
|
&sysfs_cache_hits,
|
|
|
|
&sysfs_cache_misses,
|
|
|
|
&sysfs_cache_bypass_hits,
|
|
|
|
&sysfs_cache_bypass_misses,
|
|
|
|
&sysfs_cache_hit_ratio,
|
|
|
|
&sysfs_cache_readaheads,
|
|
|
|
&sysfs_cache_miss_collisions,
|
|
|
|
&sysfs_bypassed,
|
|
|
|
NULL
|
|
|
|
};
|
|
|
|
static KTYPE(bch_stats);
|
|
|
|
|
|
|
|
int bch_cache_accounting_add_kobjs(struct cache_accounting *acc,
|
|
|
|
struct kobject *parent)
|
|
|
|
{
|
|
|
|
int ret = kobject_add(&acc->total.kobj, parent,
|
|
|
|
"stats_total");
|
|
|
|
ret = ret ?: kobject_add(&acc->five_minute.kobj, parent,
|
|
|
|
"stats_five_minute");
|
|
|
|
ret = ret ?: kobject_add(&acc->hour.kobj, parent,
|
|
|
|
"stats_hour");
|
|
|
|
ret = ret ?: kobject_add(&acc->day.kobj, parent,
|
|
|
|
"stats_day");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
void bch_cache_accounting_clear(struct cache_accounting *acc)
|
|
|
|
{
|
bcache: fix memory corruption in bch_cache_accounting_clear()
Commit 83ff9318c44ba ("bcache: not use hard coded memset size in
bch_cache_accounting_clear()") tries to make the code more easy to
understand by removing the hard coded number with following change,
void bch_cache_accounting_clear(...)
{
memset(&acc->total.cache_hits,
0,
- sizeof(unsigned long) * 7);
+ sizeof(struct cache_stats));
}
Unfortunately the change was wrong (it also tells us the original code
was not easy to correctly understand). The hard coded number 7 is used
because in struct cache_stats,
15 struct cache_stats {
16 struct kobject kobj;
17
18 unsigned long cache_hits;
19 unsigned long cache_misses;
20 unsigned long cache_bypass_hits;
21 unsigned long cache_bypass_misses;
22 unsigned long cache_readaheads;
23 unsigned long cache_miss_collisions;
24 unsigned long sectors_bypassed;
25
26 unsigned int rescale;
27 };
only members in LINE 18-24 want to be set to 0. It is wrong to use
'sizeof(struct cache_stats)' to replace 'sizeof(unsigned long) * 7), the
memory objects behind acc->total is staled by this change.
Сорокин Артем Сергеевич reports that by the following steps, kernel
panic will be triggered,
1. Create new set: make-bcache -B /dev/nvme1n1 -C /dev/sda --wipe-bcache
2. Run in /sys/fs/bcache/<uuid>:
echo 1 > clear_stats && cat stats_five_minute/cache_bypass_hits
I can reproduce the panic and get following dmesg with KASAN enabled,
[22613.172742] ==================================================================
[22613.172862] BUG: KASAN: null-ptr-deref in sysfs_kf_seq_show+0x117/0x230
[22613.172864] Read of size 8 at addr 0000000000000000 by task cat/6753
[22613.172870] CPU: 1 PID: 6753 Comm: cat Not tainted 5.5.0-rc7-lp151.28.16-default+ #11
[22613.172872] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019
[22613.172873] Call Trace:
[22613.172964] dump_stack+0x8b/0xbb
[22613.172968] ? sysfs_kf_seq_show+0x117/0x230
[22613.172970] ? sysfs_kf_seq_show+0x117/0x230
[22613.173031] __kasan_report+0x176/0x192
[22613.173064] ? pr_cont_kernfs_name+0x40/0x60
[22613.173067] ? sysfs_kf_seq_show+0x117/0x230
[22613.173070] kasan_report+0xe/0x20
[22613.173072] sysfs_kf_seq_show+0x117/0x230
[22613.173105] seq_read+0x199/0x6d0
[22613.173110] vfs_read+0xa5/0x1a0
[22613.173113] ksys_read+0x110/0x160
[22613.173115] ? kernel_write+0xb0/0xb0
[22613.173177] do_syscall_64+0x77/0x290
[22613.173238] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[22613.173241] RIP: 0033:0x7fc2c886ac61
[22613.173244] Code: fe ff ff 48 8d 3d c7 a0 09 00 48 83 ec 08 e8 46 03 02 00 66 0f 1f 44 00 00 8b 05 ca fb 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89
[22613.173245] RSP: 002b:00007ffebe776d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[22613.173248] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2c886ac61
[22613.173249] RDX: 0000000000020000 RSI: 00007fc2c8cca000 RDI: 0000000000000003
[22613.173250] RBP: 0000000000020000 R08: ffffffffffffffff R09: 0000000000000000
[22613.173251] R10: 000000000000038c R11: 0000000000000246 R12: 00007fc2c8cca000
[22613.173253] R13: 0000000000000003 R14: 00007fc2c8cca00f R15: 0000000000020000
[22613.173255] ==================================================================
[22613.173256] Disabling lock debugging due to kernel taint
[22613.173350] BUG: kernel NULL pointer dereference, address: 0000000000000000
[22613.178380] #PF: supervisor read access in kernel mode
[22613.180959] #PF: error_code(0x0000) - not-present page
[22613.183444] PGD 0 P4D 0
[22613.184867] Oops: 0000 [#1] SMP KASAN PTI
[22613.186797] CPU: 1 PID: 6753 Comm: cat Tainted: G B 5.5.0-rc7-lp151.28.16-default+ #11
[22613.191253] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019
[22613.196706] RIP: 0010:sysfs_kf_seq_show+0x117/0x230
[22613.199097] Code: ff 48 8b 0b 48 8b 44 24 08 48 01 e9 eb a6 31 f6 48 89 cf ba 00 10 00 00 48 89 4c 24 10 e8 b1 e6 e9 ff 4c 89 ff e8 19 07 ea ff <49> 8b 07 48 85 c0 48 89 44 24 08 0f 84 91 00 00 00 49 8b 6d 00 48
[22613.208016] RSP: 0018:ffff8881d4f8fd78 EFLAGS: 00010246
[22613.210448] RAX: 0000000000000000 RBX: ffff8881eb99b180 RCX: ffffffff810d9ef6
[22613.213691] RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246
[22613.216893] RBP: 0000000000001000 R08: fffffbfff072ddcd R09: fffffbfff072ddcd
[22613.220075] R10: 0000000000000001 R11: fffffbfff072ddcc R12: ffff8881de5c0200
[22613.223256] R13: ffff8881ed175500 R14: ffff8881eb99b198 R15: 0000000000000000
[22613.226290] FS: 00007fc2c8d3d500(0000) GS:ffff8881f2a80000(0000) knlGS:0000000000000000
[22613.229637] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[22613.231993] CR2: 0000000000000000 CR3: 00000001ec89a004 CR4: 00000000003606e0
[22613.234909] Call Trace:
[22613.235931] seq_read+0x199/0x6d0
[22613.237259] vfs_read+0xa5/0x1a0
[22613.239229] ksys_read+0x110/0x160
[22613.240590] ? kernel_write+0xb0/0xb0
[22613.242040] do_syscall_64+0x77/0x290
[22613.243625] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[22613.245450] RIP: 0033:0x7fc2c886ac61
[22613.246706] Code: fe ff ff 48 8d 3d c7 a0 09 00 48 83 ec 08 e8 46 03 02 00 66 0f 1f 44 00 00 8b 05 ca fb 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89
[22613.253296] RSP: 002b:00007ffebe776d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[22613.255835] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2c886ac61
[22613.258472] RDX: 0000000000020000 RSI: 00007fc2c8cca000 RDI: 0000000000000003
[22613.260807] RBP: 0000000000020000 R08: ffffffffffffffff R09: 0000000000000000
[22613.263188] R10: 000000000000038c R11: 0000000000000246 R12: 00007fc2c8cca000
[22613.265598] R13: 0000000000000003 R14: 00007fc2c8cca00f R15: 0000000000020000
[22613.268729] Modules linked in: scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock fuse bnep kvm_intel kvm irqbypass crc32_pclmul crc32c_intel ghash_clmulni_intel snd_ens1371 snd_ac97_codec ac97_bus bcache snd_pcm btusb btrtl btbcm btintel crc64 aesni_intel glue_helper crypto_simd vmw_balloon cryptd bluetooth snd_timer snd_rawmidi snd joydev pcspkr e1000 rfkill vmw_vmci soundcore ecdh_generic ecc gameport i2c_piix4 mptctl ac button hid_generic usbhid sr_mod cdrom ata_generic ehci_pci vmwgfx uhci_hcd drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ttm ehci_hcd mptspi scsi_transport_spi mptscsih ata_piix mptbase ahci usbcore libahci drm sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua
[22613.292429] CR2: 0000000000000000
[22613.293563] ---[ end trace a074b26a8508f378 ]---
[22613.295138] RIP: 0010:sysfs_kf_seq_show+0x117/0x230
[22613.296769] Code: ff 48 8b 0b 48 8b 44 24 08 48 01 e9 eb a6 31 f6 48 89 cf ba 00 10 00 00 48 89 4c 24 10 e8 b1 e6 e9 ff 4c 89 ff e8 19 07 ea ff <49> 8b 07 48 85 c0 48 89 44 24 08 0f 84 91 00 00 00 49 8b 6d 00 48
[22613.303553] RSP: 0018:ffff8881d4f8fd78 EFLAGS: 00010246
[22613.305280] RAX: 0000000000000000 RBX: ffff8881eb99b180 RCX: ffffffff810d9ef6
[22613.307924] RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246
[22613.310272] RBP: 0000000000001000 R08: fffffbfff072ddcd R09: fffffbfff072ddcd
[22613.312685] R10: 0000000000000001 R11: fffffbfff072ddcc R12: ffff8881de5c0200
[22613.315076] R13: ffff8881ed175500 R14: ffff8881eb99b198 R15: 0000000000000000
[22613.318116] FS: 00007fc2c8d3d500(0000) GS:ffff8881f2a80000(0000) knlGS:0000000000000000
[22613.320743] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[22613.322628] CR2: 0000000000000000 CR3: 00000001ec89a004 CR4: 00000000003606e0
Here this patch fixes the following problem by explicity set all the 7
members to 0 in bch_cache_accounting_clear().
Reported-by: Сорокин Артем Сергеевич <a.sorokin@bank-hlynov.ru>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-01 14:42:31 +00:00
|
|
|
acc->total.cache_hits = 0;
|
|
|
|
acc->total.cache_misses = 0;
|
|
|
|
acc->total.cache_bypass_hits = 0;
|
|
|
|
acc->total.cache_bypass_misses = 0;
|
|
|
|
acc->total.cache_readaheads = 0;
|
|
|
|
acc->total.cache_miss_collisions = 0;
|
|
|
|
acc->total.sectors_bypassed = 0;
|
2013-03-23 23:11:31 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void bch_cache_accounting_destroy(struct cache_accounting *acc)
|
|
|
|
{
|
|
|
|
kobject_put(&acc->total.kobj);
|
|
|
|
kobject_put(&acc->five_minute.kobj);
|
|
|
|
kobject_put(&acc->hour.kobj);
|
|
|
|
kobject_put(&acc->day.kobj);
|
|
|
|
|
|
|
|
atomic_set(&acc->closing, 1);
|
|
|
|
if (del_timer_sync(&acc->timer))
|
|
|
|
closure_return(&acc->cl);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* EWMA scaling */
|
|
|
|
|
|
|
|
static void scale_stat(unsigned long *stat)
|
|
|
|
{
|
|
|
|
*stat = ewma_add(*stat, 0, accounting_weight, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void scale_stats(struct cache_stats *stats, unsigned long rescale_at)
|
|
|
|
{
|
|
|
|
if (++stats->rescale == rescale_at) {
|
|
|
|
stats->rescale = 0;
|
|
|
|
scale_stat(&stats->cache_hits);
|
|
|
|
scale_stat(&stats->cache_misses);
|
|
|
|
scale_stat(&stats->cache_bypass_hits);
|
|
|
|
scale_stat(&stats->cache_bypass_misses);
|
|
|
|
scale_stat(&stats->cache_readaheads);
|
|
|
|
scale_stat(&stats->cache_miss_collisions);
|
|
|
|
scale_stat(&stats->sectors_bypassed);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-10-17 00:01:48 +00:00
|
|
|
static void scale_accounting(struct timer_list *t)
|
2013-03-23 23:11:31 +00:00
|
|
|
{
|
2017-10-17 00:01:48 +00:00
|
|
|
struct cache_accounting *acc = from_timer(acc, t, timer);
|
2013-03-23 23:11:31 +00:00
|
|
|
|
|
|
|
#define move_stat(name) do { \
|
2018-08-11 05:19:44 +00:00
|
|
|
unsigned int t = atomic_xchg(&acc->collector.name, 0); \
|
2013-03-23 23:11:31 +00:00
|
|
|
t <<= 16; \
|
|
|
|
acc->five_minute.name += t; \
|
|
|
|
acc->hour.name += t; \
|
|
|
|
acc->day.name += t; \
|
|
|
|
acc->total.name += t; \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
move_stat(cache_hits);
|
|
|
|
move_stat(cache_misses);
|
|
|
|
move_stat(cache_bypass_hits);
|
|
|
|
move_stat(cache_bypass_misses);
|
|
|
|
move_stat(cache_readaheads);
|
|
|
|
move_stat(cache_miss_collisions);
|
|
|
|
move_stat(sectors_bypassed);
|
|
|
|
|
|
|
|
scale_stats(&acc->total, 0);
|
|
|
|
scale_stats(&acc->day, DAY_RESCALE);
|
|
|
|
scale_stats(&acc->hour, HOUR_RESCALE);
|
|
|
|
scale_stats(&acc->five_minute, FIVE_MINUTE_RESCALE);
|
|
|
|
|
|
|
|
acc->timer.expires += accounting_delay;
|
|
|
|
|
|
|
|
if (!atomic_read(&acc->closing))
|
|
|
|
add_timer(&acc->timer);
|
|
|
|
else
|
|
|
|
closure_return(&acc->cl);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mark_cache_stats(struct cache_stat_collector *stats,
|
|
|
|
bool hit, bool bypass)
|
|
|
|
{
|
|
|
|
if (!bypass)
|
|
|
|
if (hit)
|
|
|
|
atomic_inc(&stats->cache_hits);
|
|
|
|
else
|
|
|
|
atomic_inc(&stats->cache_misses);
|
|
|
|
else
|
|
|
|
if (hit)
|
|
|
|
atomic_inc(&stats->cache_bypass_hits);
|
|
|
|
else
|
|
|
|
atomic_inc(&stats->cache_bypass_misses);
|
|
|
|
}
|
|
|
|
|
2013-09-11 02:02:45 +00:00
|
|
|
void bch_mark_cache_accounting(struct cache_set *c, struct bcache_device *d,
|
|
|
|
bool hit, bool bypass)
|
2013-03-23 23:11:31 +00:00
|
|
|
{
|
2013-09-11 02:02:45 +00:00
|
|
|
struct cached_dev *dc = container_of(d, struct cached_dev, disk);
|
2018-08-11 05:19:45 +00:00
|
|
|
|
2013-03-23 23:11:31 +00:00
|
|
|
mark_cache_stats(&dc->accounting.collector, hit, bypass);
|
2013-09-11 02:02:45 +00:00
|
|
|
mark_cache_stats(&c->accounting.collector, hit, bypass);
|
2013-03-23 23:11:31 +00:00
|
|
|
}
|
|
|
|
|
2013-09-11 02:02:45 +00:00
|
|
|
void bch_mark_cache_readahead(struct cache_set *c, struct bcache_device *d)
|
2013-03-23 23:11:31 +00:00
|
|
|
{
|
2013-09-11 02:02:45 +00:00
|
|
|
struct cached_dev *dc = container_of(d, struct cached_dev, disk);
|
2018-08-11 05:19:45 +00:00
|
|
|
|
2013-03-23 23:11:31 +00:00
|
|
|
atomic_inc(&dc->accounting.collector.cache_readaheads);
|
2013-09-11 02:02:45 +00:00
|
|
|
atomic_inc(&c->accounting.collector.cache_readaheads);
|
2013-03-23 23:11:31 +00:00
|
|
|
}
|
|
|
|
|
2013-09-11 02:02:45 +00:00
|
|
|
void bch_mark_cache_miss_collision(struct cache_set *c, struct bcache_device *d)
|
2013-03-23 23:11:31 +00:00
|
|
|
{
|
2013-09-11 02:02:45 +00:00
|
|
|
struct cached_dev *dc = container_of(d, struct cached_dev, disk);
|
2018-08-11 05:19:45 +00:00
|
|
|
|
2013-03-23 23:11:31 +00:00
|
|
|
atomic_inc(&dc->accounting.collector.cache_miss_collisions);
|
2013-09-11 02:02:45 +00:00
|
|
|
atomic_inc(&c->accounting.collector.cache_miss_collisions);
|
2013-03-23 23:11:31 +00:00
|
|
|
}
|
|
|
|
|
2013-09-11 02:02:45 +00:00
|
|
|
void bch_mark_sectors_bypassed(struct cache_set *c, struct cached_dev *dc,
|
|
|
|
int sectors)
|
2013-03-23 23:11:31 +00:00
|
|
|
{
|
|
|
|
atomic_add(sectors, &dc->accounting.collector.sectors_bypassed);
|
2013-09-11 02:02:45 +00:00
|
|
|
atomic_add(sectors, &c->accounting.collector.sectors_bypassed);
|
2013-03-23 23:11:31 +00:00
|
|
|
}
|
2013-05-15 07:11:26 +00:00
|
|
|
|
|
|
|
void bch_cache_accounting_init(struct cache_accounting *acc,
|
|
|
|
struct closure *parent)
|
|
|
|
{
|
|
|
|
kobject_init(&acc->total.kobj, &bch_stats_ktype);
|
|
|
|
kobject_init(&acc->five_minute.kobj, &bch_stats_ktype);
|
|
|
|
kobject_init(&acc->hour.kobj, &bch_stats_ktype);
|
|
|
|
kobject_init(&acc->day.kobj, &bch_stats_ktype);
|
|
|
|
|
|
|
|
closure_init(&acc->cl, parent);
|
2017-10-17 00:01:48 +00:00
|
|
|
timer_setup(&acc->timer, scale_accounting, 0);
|
2013-05-15 07:11:26 +00:00
|
|
|
acc->timer.expires = jiffies + accounting_delay;
|
|
|
|
add_timer(&acc->timer);
|
|
|
|
}
|