linux/sound/soc/s6000/s6000-i2s.c

628 lines
16 KiB
C
Raw Normal View History

/*
* ALSA SoC I2S Audio Layer for the Stretch S6000 family
*
* Author: Daniel Gloeckner, <dg@emlix.com>
* Copyright: (C) 2009 emlix GmbH <info@emlix.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/io.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/initval.h>
#include <sound/soc.h>
#include "s6000-i2s.h"
#include "s6000-pcm.h"
struct s6000_i2s_dev {
dma_addr_t sifbase;
u8 __iomem *scbbase;
unsigned int wide;
unsigned int channel_in;
unsigned int channel_out;
unsigned int lines_in;
unsigned int lines_out;
struct s6000_pcm_dma_params dma_params;
};
#define S6_I2S_INTERRUPT_STATUS 0x00
#define S6_I2S_INT_OVERRUN 1
#define S6_I2S_INT_UNDERRUN 2
#define S6_I2S_INT_ALIGNMENT 4
#define S6_I2S_INTERRUPT_ENABLE 0x04
#define S6_I2S_INTERRUPT_RAW 0x08
#define S6_I2S_INTERRUPT_CLEAR 0x0C
#define S6_I2S_INTERRUPT_SET 0x10
#define S6_I2S_MODE 0x20
#define S6_I2S_DUAL 0
#define S6_I2S_WIDE 1
#define S6_I2S_TX_DEFAULT 0x24
#define S6_I2S_DATA_CFG(c) (0x40 + 0x10 * (c))
#define S6_I2S_IN 0
#define S6_I2S_OUT 1
#define S6_I2S_UNUSED 2
#define S6_I2S_INTERFACE_CFG(c) (0x44 + 0x10 * (c))
#define S6_I2S_DIV_MASK 0x001fff
#define S6_I2S_16BIT 0x000000
#define S6_I2S_20BIT 0x002000
#define S6_I2S_24BIT 0x004000
#define S6_I2S_32BIT 0x006000
#define S6_I2S_BITS_MASK 0x006000
#define S6_I2S_MEM_16BIT 0x000000
#define S6_I2S_MEM_32BIT 0x008000
#define S6_I2S_MEM_MASK 0x008000
#define S6_I2S_CHANNELS_SHIFT 16
#define S6_I2S_CHANNELS_MASK 0x030000
#define S6_I2S_SCK_IN 0x000000
#define S6_I2S_SCK_OUT 0x040000
#define S6_I2S_SCK_DIR 0x040000
#define S6_I2S_WS_IN 0x000000
#define S6_I2S_WS_OUT 0x080000
#define S6_I2S_WS_DIR 0x080000
#define S6_I2S_LEFT_FIRST 0x000000
#define S6_I2S_RIGHT_FIRST 0x100000
#define S6_I2S_FIRST 0x100000
#define S6_I2S_CUR_SCK 0x200000
#define S6_I2S_CUR_WS 0x400000
#define S6_I2S_ENABLE(c) (0x48 + 0x10 * (c))
#define S6_I2S_DISABLE_IF 0x02
#define S6_I2S_ENABLE_IF 0x03
#define S6_I2S_IS_BUSY 0x04
#define S6_I2S_DMA_ACTIVE 0x08
#define S6_I2S_IS_ENABLED 0x10
#define S6_I2S_NUM_LINES 4
#define S6_I2S_SIF_PORT0 0x0000000
#define S6_I2S_SIF_PORT1 0x0000080 /* docs say 0x0000010 */
static inline void s6_i2s_write_reg(struct s6000_i2s_dev *dev, int reg, u32 val)
{
writel(val, dev->scbbase + reg);
}
static inline u32 s6_i2s_read_reg(struct s6000_i2s_dev *dev, int reg)
{
return readl(dev->scbbase + reg);
}
static inline void s6_i2s_mod_reg(struct s6000_i2s_dev *dev, int reg,
u32 mask, u32 val)
{
val ^= s6_i2s_read_reg(dev, reg) & ~mask;
s6_i2s_write_reg(dev, reg, val);
}
static void s6000_i2s_start_channel(struct s6000_i2s_dev *dev, int channel)
{
int i, j, cur, prev;
/*
* Wait for WCLK to toggle 5 times before enabling the channel
* s6000 Family Datasheet 3.6.4:
* "At least two cycles of WS must occur between commands
* to disable or enable the interface"
*/
j = 0;
prev = ~S6_I2S_CUR_WS;
for (i = 1000000; --i && j < 6; ) {
cur = s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(channel))
& S6_I2S_CUR_WS;
if (prev != cur) {
prev = cur;
j++;
}
}
if (j < 6)
printk(KERN_WARNING "s6000-i2s: timeout waiting for WCLK\n");
s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_ENABLE_IF);
}
static void s6000_i2s_stop_channel(struct s6000_i2s_dev *dev, int channel)
{
s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_DISABLE_IF);
}
static void s6000_i2s_start(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct s6000_i2s_dev *dev = rtd->dai->cpu_dai->private_data;
int channel;
channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
dev->channel_out : dev->channel_in;
s6000_i2s_start_channel(dev, channel);
}
static void s6000_i2s_stop(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct s6000_i2s_dev *dev = rtd->dai->cpu_dai->private_data;
int channel;
channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
dev->channel_out : dev->channel_in;
s6000_i2s_stop_channel(dev, channel);
}
static int s6000_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
int after)
{
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
if ((substream->stream == SNDRV_PCM_STREAM_CAPTURE) ^ !after)
s6000_i2s_start(substream);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
if (!after)
s6000_i2s_stop(substream);
}
return 0;
}
static unsigned int s6000_i2s_int_sources(struct s6000_i2s_dev *dev)
{
unsigned int pending;
pending = s6_i2s_read_reg(dev, S6_I2S_INTERRUPT_RAW);
pending &= S6_I2S_INT_ALIGNMENT |
S6_I2S_INT_UNDERRUN |
S6_I2S_INT_OVERRUN;
s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, pending);
return pending;
}
static unsigned int s6000_i2s_check_xrun(struct snd_soc_dai *cpu_dai)
{
struct s6000_i2s_dev *dev = cpu_dai->private_data;
unsigned int errors;
unsigned int ret;
errors = s6000_i2s_int_sources(dev);
if (likely(!errors))
return 0;
ret = 0;
if (errors & S6_I2S_INT_ALIGNMENT)
printk(KERN_ERR "s6000-i2s: WCLK misaligned\n");
if (errors & S6_I2S_INT_UNDERRUN)
ret |= 1 << SNDRV_PCM_STREAM_PLAYBACK;
if (errors & S6_I2S_INT_OVERRUN)
ret |= 1 << SNDRV_PCM_STREAM_CAPTURE;
return ret;
}
static void s6000_i2s_wait_disabled(struct s6000_i2s_dev *dev)
{
int channel;
int n = 50;
for (channel = 0; channel < 2; channel++) {
while (--n >= 0) {
int v = s6_i2s_read_reg(dev, S6_I2S_ENABLE(channel));
if ((v & S6_I2S_IS_ENABLED)
|| !(v & (S6_I2S_DMA_ACTIVE | S6_I2S_IS_BUSY)))
break;
udelay(20);
}
}
if (n < 0)
printk(KERN_WARNING "s6000-i2s: timeout disabling interfaces");
}
static int s6000_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
unsigned int fmt)
{
struct s6000_i2s_dev *dev = cpu_dai->private_data;
u32 w;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
w = S6_I2S_SCK_IN | S6_I2S_WS_IN;
break;
case SND_SOC_DAIFMT_CBS_CFM:
w = S6_I2S_SCK_OUT | S6_I2S_WS_IN;
break;
case SND_SOC_DAIFMT_CBM_CFS:
w = S6_I2S_SCK_IN | S6_I2S_WS_OUT;
break;
case SND_SOC_DAIFMT_CBS_CFS:
w = S6_I2S_SCK_OUT | S6_I2S_WS_OUT;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
w |= S6_I2S_LEFT_FIRST;
break;
case SND_SOC_DAIFMT_NB_IF:
w |= S6_I2S_RIGHT_FIRST;
break;
default:
return -EINVAL;
}
s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(0),
S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(1),
S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
return 0;
}
static int s6000_i2s_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
{
struct s6000_i2s_dev *dev = dai->private_data;
if (!div || (div & 1) || div > (S6_I2S_DIV_MASK + 1) * 2)
return -EINVAL;
s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(div_id),
S6_I2S_DIV_MASK, div / 2 - 1);
return 0;
}
static int s6000_i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct s6000_i2s_dev *dev = dai->private_data;
int interf;
u32 w = 0;
if (dev->wide)
interf = 0;
else {
w |= (((params_channels(params) - 2) / 2)
<< S6_I2S_CHANNELS_SHIFT) & S6_I2S_CHANNELS_MASK;
interf = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
? dev->channel_out : dev->channel_in;
}
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
w |= S6_I2S_16BIT | S6_I2S_MEM_16BIT;
break;
case SNDRV_PCM_FORMAT_S32_LE:
w |= S6_I2S_32BIT | S6_I2S_MEM_32BIT;
break;
default:
printk(KERN_WARNING "s6000-i2s: unsupported PCM format %x\n",
params_format(params));
return -EINVAL;
}
if (s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(interf))
& S6_I2S_IS_ENABLED) {
printk(KERN_ERR "s6000-i2s: interface already enabled\n");
return -EBUSY;
}
s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(interf),
S6_I2S_CHANNELS_MASK|S6_I2S_MEM_MASK|S6_I2S_BITS_MASK,
w);
return 0;
}
static int s6000_i2s_dai_probe(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
struct s6000_i2s_dev *dev = dai->private_data;
struct s6000_snd_platform_data *pdata = pdev->dev.platform_data;
if (!pdata)
return -EINVAL;
dev->wide = pdata->wide;
dev->channel_in = pdata->channel_in;
dev->channel_out = pdata->channel_out;
dev->lines_in = pdata->lines_in;
dev->lines_out = pdata->lines_out;
s6_i2s_write_reg(dev, S6_I2S_MODE,
dev->wide ? S6_I2S_WIDE : S6_I2S_DUAL);
if (dev->wide) {
int i;
if (dev->lines_in + dev->lines_out > S6_I2S_NUM_LINES)
return -EINVAL;
dev->channel_in = 0;
dev->channel_out = 1;
dai->capture.channels_min = 2 * dev->lines_in;
dai->capture.channels_max = dai->capture.channels_min;
dai->playback.channels_min = 2 * dev->lines_out;
dai->playback.channels_max = dai->playback.channels_min;
for (i = 0; i < dev->lines_out; i++)
s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_OUT);
for (; i < S6_I2S_NUM_LINES - dev->lines_in; i++)
s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i),
S6_I2S_UNUSED);
for (; i < S6_I2S_NUM_LINES; i++)
s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_IN);
} else {
unsigned int cfg[2] = {S6_I2S_UNUSED, S6_I2S_UNUSED};
if (dev->lines_in > 1 || dev->lines_out > 1)
return -EINVAL;
dai->capture.channels_min = 2 * dev->lines_in;
dai->capture.channels_max = 8 * dev->lines_in;
dai->playback.channels_min = 2 * dev->lines_out;
dai->playback.channels_max = 8 * dev->lines_out;
if (dev->lines_in)
cfg[dev->channel_in] = S6_I2S_IN;
if (dev->lines_out)
cfg[dev->channel_out] = S6_I2S_OUT;
s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(0), cfg[0]);
s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(1), cfg[1]);
}
if (dev->lines_out) {
if (dev->lines_in) {
if (!dev->dma_params.dma_out)
return -ENODEV;
} else {
dev->dma_params.dma_out = dev->dma_params.dma_in;
dev->dma_params.dma_in = 0;
}
}
dev->dma_params.sif_in = dev->sifbase + (dev->channel_in ?
S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
dev->dma_params.sif_out = dev->sifbase + (dev->channel_out ?
S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
dev->dma_params.same_rate = pdata->same_rate | pdata->wide;
return 0;
}
#define S6000_I2S_RATES (SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \
SNDRV_PCM_RATE_8000_192000)
#define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
static struct snd_soc_dai_ops s6000_i2s_dai_ops = {
.set_fmt = s6000_i2s_set_dai_fmt,
.set_clkdiv = s6000_i2s_set_clkdiv,
.hw_params = s6000_i2s_hw_params,
};
struct snd_soc_dai s6000_i2s_dai = {
.name = "s6000-i2s",
.id = 0,
.probe = s6000_i2s_dai_probe,
.playback = {
.channels_min = 2,
.channels_max = 8,
.formats = S6000_I2S_FORMATS,
.rates = S6000_I2S_RATES,
.rate_min = 0,
.rate_max = 1562500,
},
.capture = {
.channels_min = 2,
.channels_max = 8,
.formats = S6000_I2S_FORMATS,
.rates = S6000_I2S_RATES,
.rate_min = 0,
.rate_max = 1562500,
},
.ops = &s6000_i2s_dai_ops,
}
EXPORT_SYMBOL_GPL(s6000_i2s_dai);
static int __devinit s6000_i2s_probe(struct platform_device *pdev)
{
struct s6000_i2s_dev *dev;
struct resource *scbmem, *sifmem, *region, *dma1, *dma2;
u8 __iomem *mmio;
int ret;
scbmem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!scbmem) {
dev_err(&pdev->dev, "no mem resource?\n");
ret = -ENODEV;
goto err_release_none;
}
region = request_mem_region(scbmem->start, resource_size(scbmem),
pdev->name);
if (!region) {
dev_err(&pdev->dev, "I2S SCB region already claimed\n");
ret = -EBUSY;
goto err_release_none;
}
mmio = ioremap(scbmem->start, resource_size(scbmem));
if (!mmio) {
dev_err(&pdev->dev, "can't ioremap SCB region\n");
ret = -ENOMEM;
goto err_release_scb;
}
sifmem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!sifmem) {
dev_err(&pdev->dev, "no second mem resource?\n");
ret = -ENODEV;
goto err_release_map;
}
region = request_mem_region(sifmem->start, resource_size(sifmem),
pdev->name);
if (!region) {
dev_err(&pdev->dev, "I2S SIF region already claimed\n");
ret = -EBUSY;
goto err_release_map;
}
dma1 = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (!dma1) {
dev_err(&pdev->dev, "no dma resource?\n");
ret = -ENODEV;
goto err_release_sif;
}
region = request_mem_region(dma1->start, resource_size(dma1),
pdev->name);
if (!region) {
dev_err(&pdev->dev, "I2S DMA region already claimed\n");
ret = -EBUSY;
goto err_release_sif;
}
dma2 = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (dma2) {
region = request_mem_region(dma2->start, resource_size(dma2),
pdev->name);
if (!region) {
dev_err(&pdev->dev,
"I2S DMA region already claimed\n");
ret = -EBUSY;
goto err_release_dma1;
}
}
dev = kzalloc(sizeof(struct s6000_i2s_dev), GFP_KERNEL);
if (!dev) {
ret = -ENOMEM;
goto err_release_dma2;
}
s6000_i2s_dai.dev = &pdev->dev;
s6000_i2s_dai.private_data = dev;
s6000_i2s_dai.capture.dma_data = &dev->dma_params;
s6000_i2s_dai.playback.dma_data = &dev->dma_params;
dev->sifbase = sifmem->start;
dev->scbbase = mmio;
s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR,
S6_I2S_INT_ALIGNMENT |
S6_I2S_INT_UNDERRUN |
S6_I2S_INT_OVERRUN);
s6000_i2s_stop_channel(dev, 0);
s6000_i2s_stop_channel(dev, 1);
s6000_i2s_wait_disabled(dev);
dev->dma_params.check_xrun = s6000_i2s_check_xrun;
dev->dma_params.trigger = s6000_i2s_trigger;
dev->dma_params.dma_in = dma1->start;
dev->dma_params.dma_out = dma2 ? dma2->start : 0;
dev->dma_params.irq = platform_get_irq(pdev, 0);
if (dev->dma_params.irq < 0) {
dev_err(&pdev->dev, "no irq resource?\n");
ret = -ENODEV;
goto err_release_dev;
}
s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE,
S6_I2S_INT_ALIGNMENT |
S6_I2S_INT_UNDERRUN |
S6_I2S_INT_OVERRUN);
ret = snd_soc_register_dai(&s6000_i2s_dai);
if (ret)
goto err_release_dev;
return 0;
err_release_dev:
kfree(dev);
err_release_dma2:
if (dma2)
release_mem_region(dma2->start, resource_size(dma2));
err_release_dma1:
release_mem_region(dma1->start, resource_size(dma1));
err_release_sif:
release_mem_region(sifmem->start, resource_size(sifmem));
err_release_map:
iounmap(mmio);
err_release_scb:
release_mem_region(scbmem->start, resource_size(scbmem));
err_release_none:
return ret;
}
static void __devexit s6000_i2s_remove(struct platform_device *pdev)
{
struct s6000_i2s_dev *dev = s6000_i2s_dai.private_data;
struct resource *region;
void __iomem *mmio = dev->scbbase;
snd_soc_unregister_dai(&s6000_i2s_dai);
s6000_i2s_stop_channel(dev, 0);
s6000_i2s_stop_channel(dev, 1);
s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
s6000_i2s_dai.private_data = 0;
kfree(dev);
region = platform_get_resource(pdev, IORESOURCE_DMA, 0);
release_mem_region(region->start, resource_size(region));
region = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (region)
release_mem_region(region->start, resource_size(region));
region = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(region->start, resource_size(region));
iounmap(mmio);
region = platform_get_resource(pdev, IORESOURCE_IO, 0);
release_mem_region(region->start, resource_size(region));
}
static struct platform_driver s6000_i2s_driver = {
.probe = s6000_i2s_probe,
.remove = __devexit_p(s6000_i2s_remove),
.driver = {
.name = "s6000-i2s",
.owner = THIS_MODULE,
},
};
static int __init s6000_i2s_init(void)
{
return platform_driver_register(&s6000_i2s_driver);
}
module_init(s6000_i2s_init);
static void __exit s6000_i2s_exit(void)
{
platform_driver_unregister(&s6000_i2s_driver);
}
module_exit(s6000_i2s_exit);
MODULE_AUTHOR("Daniel Gloeckner");
MODULE_DESCRIPTION("Stretch s6000 family I2S SoC Interface");
MODULE_LICENSE("GPL");