Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-14 16:12:02 +00:00
Code Issues Packages Projects Releases Wiki Activity
bb176f6709
linux/drivers/usb/Makefile

67 lines
1.7 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# Makefile for the kernel USB device drivers.
#
# Object files in subdirectories
obj-$(CONFIG_USB) += core/
usb: load usb phy earlier USB PHY works proper is the base for the coming USB controller operation. With this patch, it can avoid the controller drivers which are linked earlier than USB PHY always being probed deferral. Look at drivers/Makefile, it links phy first with the similar method. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-12 08:18:09 +00:00
obj-$(CONFIG_USB_SUPPORT) += phy/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 15:10:58 +00:00
obj-$(CONFIG_USB_DWC3) += dwc3/
Move DWC2 driver out of staging The DWC2 driver should now be in good enough shape to move out of staging. I have stress tested it overnight on RPI running mass storage and Ethernet transfers in parallel, and for several days on our proprietary PCI-based platform. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-13 21:50:09 +00:00
obj-$(CONFIG_USB_DWC2) += dwc2/
usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ Now that this is DRD, it doesn't make sense to keep it under drivers/usb/host. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-20 22:56:02 +00:00
obj-$(CONFIG_USB_ISP1760) += isp1760/
usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 15:10:58 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_USB_MON) += mon/
usb: Add MediaTek USB3 DRD driver This patch adds support for the MediaTek USB3 controller integrated into MT8173. It currently supports High-Speed Peripheral Only mode. Super-Speed Peripheral, Dual-Role Device and Host Only (xHCI) modes will be added in the next patchs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-19 02:28:23 +00:00
obj-$(CONFIG_USB_MTU3) += mtu3/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-25 11:20:55 +00:00
obj-$(CONFIG_USB_PCI) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_USB_EHCI_HCD) += host/
[PATCH] USB: Add isp116x-hcd USB host controller driver This patch provides an "isp116x-hcd" driver for Philips' ISP1160/ISP1161 USB host controllers. The driver: - is relatively small, meant for use on embedded platforms. - runs usbtests 1-14 without problems for days. - has been in use by 6-7 different people on ARM and PPC platforms, running a range of devices including USB hubs. - supports suspend/resume of both the platform device and the root hub; supports remote wakeup of the root hub (but NOT the platform device) by USB devices. - does NOT support ISO transfers (nobody has asked for them). - is PIO-only. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-09 19:57:39 +00:00
obj-$(CONFIG_USB_ISP116X_HCD) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
USB: Driver for Freescale QUICC Engine USB Host Controller This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-10 02:03:21 +00:00
obj-$(CONFIG_USB_FHCI_HCD) += host/
USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries. Add Makefile and Kconfig entries for the xHCI host controller driver. List Sarah Sharp as the maintainer for the xHCI driver. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 02:07:13 +00:00
obj-$(CONFIG_USB_XHCI_HCD) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_USB_SL811_HCD) += host/
USB: NXP ISP1362 USB host driver Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-17 00:51:21 +00:00
obj-$(CONFIG_USB_ISP1362_HCD) += host/
USB: u132-hcd: host controller driver for ELAN U132 adapter This "u132-hcd" module is one half of the "driver" for ELAN's U132 which is a USB to CardBus OHCI controller adapter. This module needs the "ftdi-elan" module in order to communicate to CardBus OHCI controller inserted into the U132 adapter. When the "ftdi-elan" module detects a supported CardBus OHCI controller in the U132 adapter it loads this "u132-hcd" module. Upon a successful device probe() the single workqueue is started up which does all the processing of commands from the USB core that implement the host controller. The workqueue maintains the urb queues and issues commands via the functions exported by the "ftdi-elan" module. Each such command will result in a callback. Note that the "ftdi-elan" module is a USB client driver. Note that this "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 10:27:35 +00:00
obj-$(CONFIG_USB_U132_HCD) += host/
USB: r8a66597-hcd: host controller driver for R8A66597 I would like to submit Renesas R8A66597 USB HCD driver. R8A66597 is Renesas USB 2.0 host and peripheral combined controller device originally designed for embedded products. As a limitation of this device, it does not support externel hub more than 2 tier, and cannot communicate with a USB device more than 10. Then this device is not compatible with EHCI and/or OHCI, I wrote driver support patch based on sl811 code. This driver has the following unique specifications: - Implement transfer timeout to share one pipe with plural endpoint. - Detach detection of a USB device connected to externel hub. The driver has been tested external hub, usb-hdd, usb-cdrom, usb-speaker, mice, keyboard, and usbtest driver. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-10 04:18:19 +00:00
obj-$(CONFIG_USB_R8A66597_HCD) += host/
wusb: add HWA host controller driver Add a driver for Wireless USB host controllers connected via USB (a Host Wire Adapter or HWA). Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 15:34:30 +00:00
obj-$(CONFIG_USB_HWA_HCD) += host/
USB: MXC: Add i.MX21 specific USB host controller driver. This driver is a Full / Low speed only USB host for the i.MX21. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-21 11:14:48 +00:00
obj-$(CONFIG_USB_IMX21_HCD) += host/
usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol The USB_FSL_MPH_DR_OF symbol is used to ensure the code that interprets the DR device node is built whenever one of the two drivers (EHCI or UDC) for the platform is enabled. However, if CONFIG_USB is disabled and we only support gadget mode, this causes a Kconfig warning: warning: (USB_FSL_USB2) selects USB_FSL_MPH_DR_OF which has unmet direct dependencies (USB_SUPPORT && USB) We can avoid this warning by simply no longer using the symbol, and making sure we enter the drivers/usb/host/ directory when the UDC driver is enabled that needs the file, and then we use Makefile syntax to ensure the file is built-in if needed. There is currently a dependency on CONFIG_OF, but this is redundant, as we already know that this is set unconditionally for the platforms that use this driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-01-28 16:20:54 +00:00
obj-$(CONFIG_USB_FSL_USB2) += host/
usb: host: Faraday fotg210-hcd driver FOTG210 is an OTG controller which can be configured as an USB2.0 host. FOTG210 host is an ehci-like controller with some differences. First, register layout of FOTG210 is incompatible with EHCI. Furthermore, FOTG210 is lack of siTDs which means iTDs are used for both HS and FS ISO transfer. Signed-off-by: Feng-Hsin Chiang <john453@faraday-tech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-29 16:48:32 +00:00
obj-$(CONFIG_USB_FOTG210_HCD) += host/
Add support for using a MAX3421E chip as a host driver. Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-29 04:14:07 +00:00
obj-$(CONFIG_USB_MAX3421_HCD) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
USB: add Cypress c67x00 OTG controller HCD driver This patch adds HCD support for the Cypress c67x00 family of devices. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-27 06:59:45 +00:00
obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
wusb: add the Wireless USB core (build-system) Add the WUSB build system (Kconfig and Kbuild) files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 15:34:26 +00:00
obj-$(CONFIG_USB_WUSB) += wusbcore/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/
USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work. If CONFIG_USB_ACM and CONFIG_USB_PRINTER are not set, then cdc-wdm and usbtmc won't get built. Signed-off-by: Andy Lutomirski <amluto@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 19:53:02 +00:00
obj-$(CONFIG_USB_WDM) += class/
obj-$(CONFIG_USB_TMC) += class/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_USB_STORAGE) += storage/
[PATCH] USB: drivers/usb/storage/libusual This patch adds a shim driver libusual, which routes devices between usb-storage and ub according to the common table, based on unusual_devs.h. The help and example syntax is in Kconfig. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-23 03:15:09 +00:00
obj-$(CONFIG_USB) += storage/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_USB_MDC800) += image/
obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
USB: always visit drivers/usb/misc/ Currently, every driver under drivers/usb/misc/ also has to be listed in drivers/usb/Makefile. This has been forgotten more than once, and this patch changes drivers/usb/Makefile to simply always visit drivers/usb/misc/ when building the USB code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Toralf Förster <toralf.foerster@gmx.de> Acked-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-11 17:10:21 +00:00
obj-$(CONFIG_USB) += misc/
usb/early: Add driver for xhci debug capability XHCI debug capability (DbC) is an optional but standalone functionality provided by an xHCI host controller. Software learns this capability by walking through the extended capability list of the host. XHCI specification describes DbC in section 7.6. This patch introduces the code to probe and initialize the debug capability hardware during early boot. With hardware initialized, the debug target (system on which this code is running) will present a debug device through the debug port (normally the first USB3 port). The debug device is fully compliant with the USB framework and provides the equivalent of a very high performance (USB3) full-duplex serial link between the debug host and target. The DbC functionality is independent of the xHCI host. There isn't any precondition from the xHCI host side for the DbC to work. One use for this feature is kernel debugging, for example when your machine crashes very early before the regular console code is initialized. Other uses include simpler, lockless logging instead of a full-blown printk console driver and klogd. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-3-git-send-email-baolu.lu@linux.intel.com [ Small fix to the Kconfig help text. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-21 08:01:30 +00:00
obj-$(CONFIG_EARLY_PRINTK_USB) += early/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
obj-$(CONFIG_USB_ATM) += atm/
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
usb: don't enter usb subdirectories directly Instead, make we enter usb/ directory on all needed cases and enter the subdirectories from drivers/usb/Makefile. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07 07:59:34 +00:00
obj-$(CONFIG_USB_MUSB_HDRC) += musb/
usb: move ci13xxx and related code to drivers/usb/chipidea Since chipidea is a dual role controller, it makes sense to move it to its own directory, where we can also have host, otg and platform code related to this controller. It also makes sense to break out the driver into several compilation units like udc, host, debugging code, etc. Firstly, let's move the udc and platform code to drivers/usb/chipidea. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 14:25:45 +00:00
obj-$(CONFIG_USB_CHIPIDEA) += chipidea/
usb: don't enter usb subdirectories directly Instead, make we enter usb/ directory on all needed cases and enter the subdirectories from drivers/usb/Makefile. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07 07:59:34 +00:00
obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
obj-$(CONFIG_USB_GADGET) += gadget/
usb: Provide usb_speed_string() function In a few places in the kernel, the code prints a human-readable USB device speed (eg. "high speed"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To mitigate this issue, this commit introduces usb_speed_string() function, which returns a human-readable name of provided speed. It also changes a few places switch was used to use this new function. This changes a bit the way the speed is printed in few instances at the same time standardising it. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-30 15:11:19 +00:00
usb: move usb/usb-common.c to usb/common/usb-common.c Since we will have more usb-common things, and it will let usb-common.c be larger and larger, we create a folder named usb/common for all usb common things. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-29 00:35:58 +00:00
obj-$(CONFIG_USB_COMMON) += common/
usbip: move usbip kernel code out of staging At this point, USB/IP kernel code is fully functional and can be moved out of staging. Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-20 04:31:00 +00:00
obj-$(CONFIG_USBIP_CORE) += usbip/
usb: USB Type-C connector class The purpose of USB Type-C connector class is to provide unified interface for the user space to get the status and basic information about USB Type-C connectors on a system, control over data role swapping, and when the port supports USB Power Delivery, also control over power role swapping and Alternate Modes. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-and-Tested-by: Felipe Balbi <felipe.balbi@linux.intel.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-21 11:56:47 +00:00
obj-$(CONFIG_TYPEC) += typec/
Reference in New Issue Copy Permalink