linux/scripts/gcc-x86_32-has-stack-protector.sh

9 lines
405 B
Bash
Raw Normal View History

#!/bin/sh
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
# SPDX-License-Identifier: GPL-2.0
x86/stackprotector/32: Make the canary into a regular percpu variable On 32-bit kernels, the stackprotector canary is quite nasty -- it is stored at %gs:(20), which is nasty because 32-bit kernels use %fs for percpu storage. It's even nastier because it means that whether %gs contains userspace state or kernel state while running kernel code depends on whether stackprotector is enabled (this is CONFIG_X86_32_LAZY_GS), and this setting radically changes the way that segment selectors work. Supporting both variants is a maintenance and testing mess. Merely rearranging so that percpu and the stack canary share the same segment would be messy as the 32-bit percpu address layout isn't currently compatible with putting a variable at a fixed offset. Fortunately, GCC 8.1 added options that allow the stack canary to be accessed as %fs:__stack_chk_guard, effectively turning it into an ordinary percpu variable. This lets us get rid of all of the code to manage the stack canary GDT descriptor and the CONFIG_X86_32_LAZY_GS mess. (That name is special. We could use any symbol we want for the %fs-relative mode, but for CONFIG_SMP=n, gcc refuses to let us use any name other than __stack_chk_guard.) Forcibly disable stackprotector on older compilers that don't support the new options and turn the stack canary into a percpu variable. The "lazy GS" approach is now used for all 32-bit configurations. Also makes load_gs_index() work on 32-bit kernels. On 64-bit kernels, it loads the GS selector and updates the user GSBASE accordingly. (This is unchanged.) On 32-bit kernels, it loads the GS selector and updates GSBASE, which is now always the user base. This means that the overall effect is the same on 32-bit and 64-bit, which avoids some ifdeffery. [ bp: Massage commit message. ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/c0ff7dba14041c7e5d1cae5d4df052f03759bef3.1613243844.git.luto@kernel.org
2021-02-13 19:19:44 +00:00
# This requires GCC 8.1 or better. Specifically, we require
# -mstack-protector-guard-reg, added by
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81708
kbuild: Fix '-S -c' in x86 stack protector scripts After a recent change in clang to stop consuming all instances of '-S' and '-c' [1], the stack protector scripts break due to the kernel's use of -Werror=unused-command-line-argument to catch cases where flags are not being properly consumed by the compiler driver: $ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument] This results in CONFIG_STACKPROTECTOR getting disabled because CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set. '-c' and '-S' both instruct the compiler to stop at different stages of the pipeline ('-S' after compiling, '-c' after assembling), so having them present together in the same command makes little sense. In this case, the test wants to stop before assembling because it is looking at the textual assembly output of the compiler for either '%fs' or '%gs', so remove '-c' from the list of arguments to resolve the error. All versions of GCC continue to work after this change, along with versions of clang that do or do not contain the change mentioned above. Cc: stable@vger.kernel.org Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS") Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector") Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-07-26 18:05:00 +00:00
echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -m32 -O0 -fstack-protector -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard - -o - 2> /dev/null | grep -q "%fs"