linux/mm/memcontrol-v1.h

148 lines
5.1 KiB
C
Raw Normal View History

mm: memcg: introduce memcontrol-v1.c Patch series "mm: memcg: separate legacy cgroup v1 code and put under config option", v2. Cgroups v2 have been around for a while and many users have fully adopted them, so they never use cgroups v1 features and functionality. Yet they have to "pay" for the cgroup v1 support anyway: 1) the kernel binary contains an unused cgroup v1 code, 2) some code paths have additional checks which are not needed, 3) some common structures like task_struct and mem_cgroup contain unused cgroup v1-specific members. Cgroup v1's memory controller has a number of features that are not supported by cgroup v2 and their implementation is pretty much self contained. Most notably, these features are: soft limit reclaim, oom handling in userspace, complicated event notification system, charge migration. Cgroup v1-specific code in memcontrol.c is close to 4k lines in size and it's intervened with generic and cgroup v2-specific code. It's a burden on developers and maintainers. This patchset aims to solve these problems by: 1) moving cgroup v1-specific memcg code to the new mm/memcontrol-v1.c file, 2) putting definitions shared by memcontrol.c and memcontrol-v1.c into the mm/memcontrol-v1.h header, 3) introducing the CONFIG_MEMCG_V1 config option, turned off by default, 4) making memcontrol-v1.c to compile only if CONFIG_MEMCG_V1 is set. If CONFIG_MEMCG_V1 is not set, cgroup v1 memory controller is still available for mounting, however no memory-specific control knobs are present. This patch (of 14): This patch introduces the mm/memcontrol-v1.c source file which will be used for all legacy (cgroup v1) memory cgroup code. It also introduces mm/memcontrol-v1.h to keep declarations shared between mm/memcontrol.c and mm/memcontrol-v1.c. As of now, let's compile it if CONFIG_MEMCG is set, similar to mm/memcontrol.c. Later on it can be switched to use a separate config option, so that the legacy code won't be compiled if not required. Link: https://lkml.kernel.org/r/20240625005906.106920-1-roman.gushchin@linux.dev Link: https://lkml.kernel.org/r/20240625005906.106920-2-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-25 00:58:53 +00:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef __MM_MEMCONTROL_V1_H
#define __MM_MEMCONTROL_V1_H
#include <linux/cgroup-defs.h>
/* Cgroup v1 and v2 common declarations */
mm: memcg: introduce memcontrol-v1.c Patch series "mm: memcg: separate legacy cgroup v1 code and put under config option", v2. Cgroups v2 have been around for a while and many users have fully adopted them, so they never use cgroups v1 features and functionality. Yet they have to "pay" for the cgroup v1 support anyway: 1) the kernel binary contains an unused cgroup v1 code, 2) some code paths have additional checks which are not needed, 3) some common structures like task_struct and mem_cgroup contain unused cgroup v1-specific members. Cgroup v1's memory controller has a number of features that are not supported by cgroup v2 and their implementation is pretty much self contained. Most notably, these features are: soft limit reclaim, oom handling in userspace, complicated event notification system, charge migration. Cgroup v1-specific code in memcontrol.c is close to 4k lines in size and it's intervened with generic and cgroup v2-specific code. It's a burden on developers and maintainers. This patchset aims to solve these problems by: 1) moving cgroup v1-specific memcg code to the new mm/memcontrol-v1.c file, 2) putting definitions shared by memcontrol.c and memcontrol-v1.c into the mm/memcontrol-v1.h header, 3) introducing the CONFIG_MEMCG_V1 config option, turned off by default, 4) making memcontrol-v1.c to compile only if CONFIG_MEMCG_V1 is set. If CONFIG_MEMCG_V1 is not set, cgroup v1 memory controller is still available for mounting, however no memory-specific control knobs are present. This patch (of 14): This patch introduces the mm/memcontrol-v1.c source file which will be used for all legacy (cgroup v1) memory cgroup code. It also introduces mm/memcontrol-v1.h to keep declarations shared between mm/memcontrol.c and mm/memcontrol-v1.c. As of now, let's compile it if CONFIG_MEMCG is set, similar to mm/memcontrol.c. Later on it can be switched to use a separate config option, so that the legacy code won't be compiled if not required. Link: https://lkml.kernel.org/r/20240625005906.106920-1-roman.gushchin@linux.dev Link: https://lkml.kernel.org/r/20240625005906.106920-2-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-25 00:58:53 +00:00
void mem_cgroup_charge_statistics(struct mem_cgroup *memcg, int nr_pages);
int try_charge_memcg(struct mem_cgroup *memcg, gfp_t gfp_mask,
unsigned int nr_pages);
static inline int try_charge(struct mem_cgroup *memcg, gfp_t gfp_mask,
unsigned int nr_pages)
{
if (mem_cgroup_is_root(memcg))
return 0;
return try_charge_memcg(memcg, gfp_mask, nr_pages);
}
void mem_cgroup_id_get_many(struct mem_cgroup *memcg, unsigned int n);
void mem_cgroup_id_put_many(struct mem_cgroup *memcg, unsigned int n);
/*
* Iteration constructs for visiting all cgroups (under a tree). If
* loops are exited prematurely (break), mem_cgroup_iter_break() must
* be used for reference counting.
*/
#define for_each_mem_cgroup_tree(iter, root) \
for (iter = mem_cgroup_iter(root, NULL, NULL); \
iter != NULL; \
iter = mem_cgroup_iter(root, iter, NULL))
#define for_each_mem_cgroup(iter) \
for (iter = mem_cgroup_iter(NULL, NULL, NULL); \
iter != NULL; \
iter = mem_cgroup_iter(NULL, iter, NULL))
/* Whether legacy memory+swap accounting is active */
static bool do_memsw_account(void)
{
return !cgroup_subsys_on_dfl(memory_cgrp_subsys);
}
/*
* Per memcg event counter is incremented at every pagein/pageout. With THP,
* it will be incremented by the number of pages. This counter is used
* to trigger some periodic events. This is straightforward and better
* than using jiffies etc. to handle periodic memcg event.
*/
enum mem_cgroup_events_target {
MEM_CGROUP_TARGET_THRESH,
MEM_CGROUP_TARGET_SOFTLIMIT,
MEM_CGROUP_NTARGETS,
};
bool mem_cgroup_event_ratelimit(struct mem_cgroup *memcg,
enum mem_cgroup_events_target target);
unsigned long mem_cgroup_usage(struct mem_cgroup *memcg, bool swap);
void drain_all_stock(struct mem_cgroup *root_memcg);
unsigned long memcg_events(struct mem_cgroup *memcg, int event);
unsigned long memcg_events_local(struct mem_cgroup *memcg, int event);
unsigned long memcg_page_state_local(struct mem_cgroup *memcg, int idx);
unsigned long memcg_page_state_output(struct mem_cgroup *memcg, int item);
unsigned long memcg_page_state_local_output(struct mem_cgroup *memcg, int item);
int memory_stat_show(struct seq_file *m, void *v);
/* Cgroup v1-specific declarations */
#ifdef CONFIG_MEMCG_V1
void memcg1_memcg_init(struct mem_cgroup *memcg);
void memcg1_remove_from_trees(struct mem_cgroup *memcg);
static inline void memcg1_soft_limit_reset(struct mem_cgroup *memcg)
{
WRITE_ONCE(memcg->soft_limit, PAGE_COUNTER_MAX);
}
bool memcg1_wait_acct_move(struct mem_cgroup *memcg);
struct cgroup_taskset;
int memcg1_can_attach(struct cgroup_taskset *tset);
void memcg1_cancel_attach(struct cgroup_taskset *tset);
void memcg1_move_task(void);
void memcg1_css_offline(struct mem_cgroup *memcg);
/* for encoding cft->private value on file */
enum res_type {
_MEM,
_MEMSWAP,
_KMEM,
_TCP,
};
bool memcg1_oom_prepare(struct mem_cgroup *memcg, bool *locked);
void memcg1_oom_finish(struct mem_cgroup *memcg, bool locked);
void memcg1_oom_recover(struct mem_cgroup *memcg);
void memcg1_check_events(struct mem_cgroup *memcg, int nid);
void memcg1_stat_format(struct mem_cgroup *memcg, struct seq_buf *s);
void memcg1_account_kmem(struct mem_cgroup *memcg, int nr_pages);
static inline bool memcg1_tcpmem_active(struct mem_cgroup *memcg)
{
return memcg->tcpmem_active;
}
bool memcg1_charge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages,
gfp_t gfp_mask);
static inline void memcg1_uncharge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages)
{
page_counter_uncharge(&memcg->tcpmem, nr_pages);
}
extern struct cftype memsw_files[];
extern struct cftype mem_cgroup_legacy_files[];
#else /* CONFIG_MEMCG_V1 */
static inline void memcg1_memcg_init(struct mem_cgroup *memcg) {}
static inline void memcg1_remove_from_trees(struct mem_cgroup *memcg) {}
static inline void memcg1_soft_limit_reset(struct mem_cgroup *memcg) {}
static inline bool memcg1_wait_acct_move(struct mem_cgroup *memcg) { return false; }
static inline void memcg1_css_offline(struct mem_cgroup *memcg) {}
static inline bool memcg1_oom_prepare(struct mem_cgroup *memcg, bool *locked) { return true; }
static inline void memcg1_oom_finish(struct mem_cgroup *memcg, bool locked) {}
static inline void memcg1_oom_recover(struct mem_cgroup *memcg) {}
static inline void memcg1_check_events(struct mem_cgroup *memcg, int nid) {}
static inline void memcg1_stat_format(struct mem_cgroup *memcg, struct seq_buf *s) {}
static inline void memcg1_account_kmem(struct mem_cgroup *memcg, int nr_pages) {}
static inline bool memcg1_tcpmem_active(struct mem_cgroup *memcg) { return false; }
static inline bool memcg1_charge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages,
gfp_t gfp_mask) { return true; }
static inline void memcg1_uncharge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages) {}
extern struct cftype memsw_files[];
extern struct cftype mem_cgroup_legacy_files[];
#endif /* CONFIG_MEMCG_V1 */
mm: memcg: introduce memcontrol-v1.c Patch series "mm: memcg: separate legacy cgroup v1 code and put under config option", v2. Cgroups v2 have been around for a while and many users have fully adopted them, so they never use cgroups v1 features and functionality. Yet they have to "pay" for the cgroup v1 support anyway: 1) the kernel binary contains an unused cgroup v1 code, 2) some code paths have additional checks which are not needed, 3) some common structures like task_struct and mem_cgroup contain unused cgroup v1-specific members. Cgroup v1's memory controller has a number of features that are not supported by cgroup v2 and their implementation is pretty much self contained. Most notably, these features are: soft limit reclaim, oom handling in userspace, complicated event notification system, charge migration. Cgroup v1-specific code in memcontrol.c is close to 4k lines in size and it's intervened with generic and cgroup v2-specific code. It's a burden on developers and maintainers. This patchset aims to solve these problems by: 1) moving cgroup v1-specific memcg code to the new mm/memcontrol-v1.c file, 2) putting definitions shared by memcontrol.c and memcontrol-v1.c into the mm/memcontrol-v1.h header, 3) introducing the CONFIG_MEMCG_V1 config option, turned off by default, 4) making memcontrol-v1.c to compile only if CONFIG_MEMCG_V1 is set. If CONFIG_MEMCG_V1 is not set, cgroup v1 memory controller is still available for mounting, however no memory-specific control knobs are present. This patch (of 14): This patch introduces the mm/memcontrol-v1.c source file which will be used for all legacy (cgroup v1) memory cgroup code. It also introduces mm/memcontrol-v1.h to keep declarations shared between mm/memcontrol.c and mm/memcontrol-v1.c. As of now, let's compile it if CONFIG_MEMCG is set, similar to mm/memcontrol.c. Later on it can be switched to use a separate config option, so that the legacy code won't be compiled if not required. Link: https://lkml.kernel.org/r/20240625005906.106920-1-roman.gushchin@linux.dev Link: https://lkml.kernel.org/r/20240625005906.106920-2-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-25 00:58:53 +00:00
#endif /* __MM_MEMCONTROL_V1_H */