Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-10 06:01:57 +00:00
Code Issues Packages Projects Releases Wiki Activity
baeb9a7d8b
linux/lib/trace_readwrite.c

48 lines
1.5 KiB
C
Raw Normal View History

lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-18 16:44:14 +00:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* Register read and write tracepoints
*
* Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/ftrace.h>
#include <linux/module.h>
lib/trace_readwrite.c:: replace asm-generic/io with linux/io asm-generic/io.h can be replaced with linux/io.h and the file will still build correctly. It is an asm-generic file which should be avoided if possible. Link: https://lkml.kernel.org/r/20231221-tracereadwrite-v1-1-a434f25180c7@google.com Signed-off-by: Tanzir Hasan <tanzirh@google.com> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-21 20:32:33 +00:00
#include <linux/io.h>
lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-18 16:44:14 +00:00
#define CREATE_TRACE_POINTS
#include <trace/events/rwmmio.h>
#ifdef CONFIG_TRACE_MMIO_ACCESS
void log_write_mmio(u64 val, u8 width, volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 14:34:50 +00:00
unsigned long caller_addr, unsigned long caller_addr0)
lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-18 16:44:14 +00:00
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 14:34:50 +00:00
trace_rwmmio_write(caller_addr, caller_addr0, val, width, addr);
lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-18 16:44:14 +00:00
}
EXPORT_SYMBOL_GPL(log_write_mmio);
EXPORT_TRACEPOINT_SYMBOL_GPL(rwmmio_write);
void log_post_write_mmio(u64 val, u8 width, volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 14:34:50 +00:00
unsigned long caller_addr, unsigned long caller_addr0)
lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-18 16:44:14 +00:00
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 14:34:50 +00:00
trace_rwmmio_post_write(caller_addr, caller_addr0, val, width, addr);
lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-18 16:44:14 +00:00
}
EXPORT_SYMBOL_GPL(log_post_write_mmio);
EXPORT_TRACEPOINT_SYMBOL_GPL(rwmmio_post_write);
void log_read_mmio(u8 width, const volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 14:34:50 +00:00
unsigned long caller_addr, unsigned long caller_addr0)
lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-18 16:44:14 +00:00
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 14:34:50 +00:00
trace_rwmmio_read(caller_addr, caller_addr0, width, addr);
lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-18 16:44:14 +00:00
}
EXPORT_SYMBOL_GPL(log_read_mmio);
EXPORT_TRACEPOINT_SYMBOL_GPL(rwmmio_read);
void log_post_read_mmio(u64 val, u8 width, const volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 14:34:50 +00:00
unsigned long caller_addr, unsigned long caller_addr0)
lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-18 16:44:14 +00:00
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 14:34:50 +00:00
trace_rwmmio_post_read(caller_addr, caller_addr0, val, width, addr);
lib: Add register read/write tracing support Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-18 16:44:14 +00:00
}
EXPORT_SYMBOL_GPL(log_post_read_mmio);
EXPORT_TRACEPOINT_SYMBOL_GPL(rwmmio_post_read);
#endif /* CONFIG_TRACE_MMIO_ACCESS */
Reference in New Issue Copy Permalink