License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2008-01-29 13:51:59 +00:00
|
|
|
#ifndef BLK_INTERNAL_H
|
|
|
|
#define BLK_INTERNAL_H
|
|
|
|
|
2024-07-02 15:10:19 +00:00
|
|
|
#include <linux/bio-integrity.h>
|
block: Inline encryption support for blk-mq
We must have some way of letting a storage device driver know what
encryption context it should use for en/decrypting a request. However,
it's the upper layers (like the filesystem/fscrypt) that know about and
manages encryption contexts. As such, when the upper layer submits a bio
to the block layer, and this bio eventually reaches a device driver with
support for inline encryption, the device driver will need to have been
told the encryption context for that bio.
We want to communicate the encryption context from the upper layer to the
storage device along with the bio, when the bio is submitted to the block
layer. To do this, we add a struct bio_crypt_ctx to struct bio, which can
represent an encryption context (note that we can't use the bi_private
field in struct bio to do this because that field does not function to pass
information across layers in the storage stack). We also introduce various
functions to manipulate the bio_crypt_ctx and make the bio/request merging
logic aware of the bio_crypt_ctx.
We also make changes to blk-mq to make it handle bios with encryption
contexts. blk-mq can merge many bios into the same request. These bios need
to have contiguous data unit numbers (the necessary changes to blk-merge
are also made to ensure this) - as such, it suffices to keep the data unit
number of just the first bio, since that's all a storage driver needs to
infer the data unit number to use for each data block in each bio in a
request. blk-mq keeps track of the encryption context to be used for all
the bios in a request with the request's rq_crypt_ctx. When the first bio
is added to an empty request, blk-mq will program the encryption context
of that bio into the request_queue's keyslot manager, and store the
returned keyslot in the request's rq_crypt_ctx. All the functions to
operate on encryption contexts are in blk-crypto.c.
Upper layers only need to call bio_crypt_set_ctx with the encryption key,
algorithm and data_unit_num; they don't have to worry about getting a
keyslot for each encryption context, as blk-mq/blk-crypto handles that.
Blk-crypto also makes it possible for request-based layered devices like
dm-rq to make use of inline encryption hardware by cloning the
rq_crypt_ctx and programming a keyslot in the new request_queue when
necessary.
Note that any user of the block layer can submit bios with an
encryption context, such as filesystems, device-mapper targets, etc.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-14 00:37:18 +00:00
|
|
|
#include <linux/blk-crypto.h>
|
2021-03-31 07:30:00 +00:00
|
|
|
#include <linux/memblock.h> /* for max_pfn/max_low_pfn */
|
2024-02-23 15:59:09 +00:00
|
|
|
#include <linux/sched/sysctl.h>
|
2024-01-15 21:45:07 +00:00
|
|
|
#include <linux/timekeeping.h>
|
2018-09-25 20:30:08 +00:00
|
|
|
#include <xen/xen.h>
|
block: Inline encryption support for blk-mq
We must have some way of letting a storage device driver know what
encryption context it should use for en/decrypting a request. However,
it's the upper layers (like the filesystem/fscrypt) that know about and
manages encryption contexts. As such, when the upper layer submits a bio
to the block layer, and this bio eventually reaches a device driver with
support for inline encryption, the device driver will need to have been
told the encryption context for that bio.
We want to communicate the encryption context from the upper layer to the
storage device along with the bio, when the bio is submitted to the block
layer. To do this, we add a struct bio_crypt_ctx to struct bio, which can
represent an encryption context (note that we can't use the bi_private
field in struct bio to do this because that field does not function to pass
information across layers in the storage stack). We also introduce various
functions to manipulate the bio_crypt_ctx and make the bio/request merging
logic aware of the bio_crypt_ctx.
We also make changes to blk-mq to make it handle bios with encryption
contexts. blk-mq can merge many bios into the same request. These bios need
to have contiguous data unit numbers (the necessary changes to blk-merge
are also made to ensure this) - as such, it suffices to keep the data unit
number of just the first bio, since that's all a storage driver needs to
infer the data unit number to use for each data block in each bio in a
request. blk-mq keeps track of the encryption context to be used for all
the bios in a request with the request's rq_crypt_ctx. When the first bio
is added to an empty request, blk-mq will program the encryption context
of that bio into the request_queue's keyslot manager, and store the
returned keyslot in the request's rq_crypt_ctx. All the functions to
operate on encryption contexts are in blk-crypto.c.
Upper layers only need to call bio_crypt_set_ctx with the encryption key,
algorithm and data_unit_num; they don't have to worry about getting a
keyslot for each encryption context, as blk-mq/blk-crypto handles that.
Blk-crypto also makes it possible for request-based layered devices like
dm-rq to make use of inline encryption hardware by cloning the
rq_crypt_ctx and programming a keyslot in the new request_queue when
necessary.
Note that any user of the block layer can submit bios with an
encryption context, such as filesystems, device-mapper targets, etc.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-14 00:37:18 +00:00
|
|
|
#include "blk-crypto-internal.h"
|
2011-12-13 23:33:37 +00:00
|
|
|
|
2021-09-20 12:33:23 +00:00
|
|
|
struct elevator_type;
|
|
|
|
|
2014-05-13 21:10:52 +00:00
|
|
|
/* Max future timer expiry for timeouts */
|
|
|
|
#define BLK_MAX_TIMEOUT (5 * HZ)
|
|
|
|
|
2017-01-31 22:53:20 +00:00
|
|
|
extern struct dentry *blk_debugfs_root;
|
|
|
|
|
2014-09-25 15:23:43 +00:00
|
|
|
struct blk_flush_queue {
|
2023-07-17 04:00:57 +00:00
|
|
|
spinlock_t mq_flush_lock;
|
2014-09-25 15:23:43 +00:00
|
|
|
unsigned int flush_pending_idx:1;
|
|
|
|
unsigned int flush_running_idx:1;
|
block: fix null pointer dereference in blk_mq_rq_timed_out()
We got a null pointer deference BUG_ON in blk_mq_rq_timed_out()
as following:
[ 108.825472] BUG: kernel NULL pointer dereference, address: 0000000000000040
[ 108.827059] PGD 0 P4D 0
[ 108.827313] Oops: 0000 [#1] SMP PTI
[ 108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431
[ 108.829503] Workqueue: kblockd blk_mq_timeout_work
[ 108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330
[ 108.838191] Call Trace:
[ 108.838406] bt_iter+0x74/0x80
[ 108.838665] blk_mq_queue_tag_busy_iter+0x204/0x450
[ 108.839074] ? __switch_to_asm+0x34/0x70
[ 108.839405] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.839823] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.840273] ? syscall_return_via_sysret+0xf/0x7f
[ 108.840732] blk_mq_timeout_work+0x74/0x200
[ 108.841151] process_one_work+0x297/0x680
[ 108.841550] worker_thread+0x29c/0x6f0
[ 108.841926] ? rescuer_thread+0x580/0x580
[ 108.842344] kthread+0x16a/0x1a0
[ 108.842666] ? kthread_flush_work+0x170/0x170
[ 108.843100] ret_from_fork+0x35/0x40
The bug is caused by the race between timeout handle and completion for
flush request.
When timeout handle function blk_mq_rq_timed_out() try to read
'req->q->mq_ops', the 'req' have completed and reinitiated by next
flush request, which would call blk_rq_init() to clear 'req' as 0.
After commit 12f5b93145 ("blk-mq: Remove generation seqeunce"),
normal requests lifetime are protected by refcount. Until 'rq->ref'
drop to zero, the request can really be free. Thus, these requests
cannot been reused before timeout handle finish.
However, flush request has defined .end_io and rq->end_io() is still
called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq'
can be reused by the next flush request handle, resulting in null
pointer deference BUG ON.
We fix this problem by covering flush request with 'rq->ref'.
If the refcount is not zero, flush_end_io() return and wait the
last holder recall it. To record the request status, we add a new
entry 'rq_status', which will be used in flush_end_io().
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org # v4.18+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
-------
v2:
- move rq_status from struct request to struct blk_flush_queue
v3:
- remove unnecessary '{}' pair.
v4:
- let spinlock to protect 'fq->rq_status'
v5:
- move rq_status after flush_running_idx member of struct blk_flush_queue
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-27 08:19:55 +00:00
|
|
|
blk_status_t rq_status;
|
2014-09-25 15:23:43 +00:00
|
|
|
unsigned long flush_pending_since;
|
|
|
|
struct list_head flush_queue[2];
|
2023-07-17 04:00:57 +00:00
|
|
|
unsigned long flush_data_in_flight;
|
2014-09-25 15:23:43 +00:00
|
|
|
struct request *flush_rq;
|
|
|
|
};
|
|
|
|
|
2021-08-18 01:09:25 +00:00
|
|
|
bool is_flush_rq(struct request *req);
|
block: fix null pointer dereference in blk_mq_rq_timed_out()
We got a null pointer deference BUG_ON in blk_mq_rq_timed_out()
as following:
[ 108.825472] BUG: kernel NULL pointer dereference, address: 0000000000000040
[ 108.827059] PGD 0 P4D 0
[ 108.827313] Oops: 0000 [#1] SMP PTI
[ 108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431
[ 108.829503] Workqueue: kblockd blk_mq_timeout_work
[ 108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330
[ 108.838191] Call Trace:
[ 108.838406] bt_iter+0x74/0x80
[ 108.838665] blk_mq_queue_tag_busy_iter+0x204/0x450
[ 108.839074] ? __switch_to_asm+0x34/0x70
[ 108.839405] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.839823] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.840273] ? syscall_return_via_sysret+0xf/0x7f
[ 108.840732] blk_mq_timeout_work+0x74/0x200
[ 108.841151] process_one_work+0x297/0x680
[ 108.841550] worker_thread+0x29c/0x6f0
[ 108.841926] ? rescuer_thread+0x580/0x580
[ 108.842344] kthread+0x16a/0x1a0
[ 108.842666] ? kthread_flush_work+0x170/0x170
[ 108.843100] ret_from_fork+0x35/0x40
The bug is caused by the race between timeout handle and completion for
flush request.
When timeout handle function blk_mq_rq_timed_out() try to read
'req->q->mq_ops', the 'req' have completed and reinitiated by next
flush request, which would call blk_rq_init() to clear 'req' as 0.
After commit 12f5b93145 ("blk-mq: Remove generation seqeunce"),
normal requests lifetime are protected by refcount. Until 'rq->ref'
drop to zero, the request can really be free. Thus, these requests
cannot been reused before timeout handle finish.
However, flush request has defined .end_io and rq->end_io() is still
called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq'
can be reused by the next flush request handle, resulting in null
pointer deference BUG ON.
We fix this problem by covering flush request with 'rq->ref'.
If the refcount is not zero, flush_end_io() return and wait the
last holder recall it. To record the request status, we add a new
entry 'rq_status', which will be used in flush_end_io().
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org # v4.18+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
-------
v2:
- move rq_status from struct request to struct blk_flush_queue
v3:
- remove unnecessary '{}' pair.
v4:
- let spinlock to protect 'fq->rq_status'
v5:
- move rq_status after flush_running_idx member of struct blk_flush_queue
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-27 08:19:55 +00:00
|
|
|
|
2020-03-09 21:41:37 +00:00
|
|
|
struct blk_flush_queue *blk_alloc_flush_queue(int node, int cmd_size,
|
|
|
|
gfp_t flags);
|
2014-09-25 15:23:47 +00:00
|
|
|
void blk_free_flush_queue(struct blk_flush_queue *q);
|
2014-09-25 15:23:40 +00:00
|
|
|
|
2015-10-21 17:20:12 +00:00
|
|
|
void blk_freeze_queue(struct request_queue *q);
|
2021-09-29 07:12:41 +00:00
|
|
|
void __blk_mq_unfreeze_queue(struct request_queue *q, bool force_atomic);
|
2021-09-29 07:12:40 +00:00
|
|
|
void blk_queue_start_drain(struct request_queue *q);
|
2021-11-04 18:45:51 +00:00
|
|
|
int __bio_queue_enter(struct request_queue *q, struct bio *bio);
|
2022-02-16 04:45:10 +00:00
|
|
|
void submit_bio_noacct_nocheck(struct bio *bio);
|
2024-05-06 04:20:26 +00:00
|
|
|
void bio_await_chain(struct bio *bio);
|
2021-11-04 18:45:51 +00:00
|
|
|
|
|
|
|
static inline bool blk_try_enter_queue(struct request_queue *q, bool pm)
|
|
|
|
{
|
|
|
|
rcu_read_lock();
|
|
|
|
if (!percpu_ref_tryget_live_rcu(&q->q_usage_counter))
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The code that increments the pm_only counter must ensure that the
|
|
|
|
* counter is globally visible before the queue is unfrozen.
|
|
|
|
*/
|
|
|
|
if (blk_queue_pm_only(q) &&
|
|
|
|
(!pm || queue_rpm_status(q) == RPM_SUSPENDED))
|
|
|
|
goto fail_put;
|
|
|
|
|
|
|
|
rcu_read_unlock();
|
|
|
|
return true;
|
|
|
|
|
|
|
|
fail_put:
|
|
|
|
blk_queue_exit(q);
|
|
|
|
fail:
|
|
|
|
rcu_read_unlock();
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int bio_queue_enter(struct bio *bio)
|
|
|
|
{
|
|
|
|
struct request_queue *q = bdev_get_queue(bio->bi_bdev);
|
|
|
|
|
|
|
|
if (blk_try_enter_queue(q, false))
|
|
|
|
return 0;
|
|
|
|
return __bio_queue_enter(q, bio);
|
|
|
|
}
|
2015-10-21 17:20:12 +00:00
|
|
|
|
2024-02-23 15:59:09 +00:00
|
|
|
static inline void blk_wait_io(struct completion *done)
|
|
|
|
{
|
|
|
|
/* Prevent hang_check timer from firing at us during very long I/O */
|
|
|
|
unsigned long timeout = sysctl_hung_task_timeout_secs * HZ / 2;
|
|
|
|
|
|
|
|
if (timeout)
|
|
|
|
while (!wait_for_completion_io_timeout(done, timeout))
|
|
|
|
;
|
|
|
|
else
|
|
|
|
wait_for_completion_io(done);
|
|
|
|
}
|
|
|
|
|
2021-02-02 17:19:19 +00:00
|
|
|
#define BIO_INLINE_VECS 4
|
2021-02-02 17:19:29 +00:00
|
|
|
struct bio_vec *bvec_alloc(mempool_t *pool, unsigned short *nr_vecs,
|
|
|
|
gfp_t gfp_mask);
|
|
|
|
void bvec_free(mempool_t *pool, struct bio_vec *bv, unsigned short nr_vecs);
|
2021-01-11 03:05:56 +00:00
|
|
|
|
2023-08-03 02:48:27 +00:00
|
|
|
bool bvec_try_merge_hw_page(struct request_queue *q, struct bio_vec *bv,
|
|
|
|
struct page *page, unsigned len, unsigned offset,
|
|
|
|
bool *same_page);
|
|
|
|
|
2018-09-24 07:43:52 +00:00
|
|
|
static inline bool biovec_phys_mergeable(struct request_queue *q,
|
|
|
|
struct bio_vec *vec1, struct bio_vec *vec2)
|
2018-09-24 07:43:50 +00:00
|
|
|
{
|
2018-09-24 07:43:52 +00:00
|
|
|
unsigned long mask = queue_segment_boundary(q);
|
2024-07-06 07:52:17 +00:00
|
|
|
phys_addr_t addr1 = bvec_phys(vec1);
|
|
|
|
phys_addr_t addr2 = bvec_phys(vec2);
|
2018-09-24 07:43:52 +00:00
|
|
|
|
2022-09-15 15:04:01 +00:00
|
|
|
/*
|
|
|
|
* Merging adjacent physical pages may not work correctly under KMSAN
|
|
|
|
* if their metadata pages aren't adjacent. Just disable merging.
|
|
|
|
*/
|
|
|
|
if (IS_ENABLED(CONFIG_KMSAN))
|
|
|
|
return false;
|
|
|
|
|
2018-09-24 07:43:52 +00:00
|
|
|
if (addr1 + vec1->bv_len != addr2)
|
2018-09-24 07:43:50 +00:00
|
|
|
return false;
|
2019-03-29 07:07:54 +00:00
|
|
|
if (xen_domain() && !xen_biovec_phys_mergeable(vec1, vec2->bv_page))
|
2018-09-24 07:43:50 +00:00
|
|
|
return false;
|
2018-09-24 07:43:52 +00:00
|
|
|
if ((addr1 | mask) != ((addr2 + vec2->bv_len - 1) | mask))
|
|
|
|
return false;
|
2018-09-24 07:43:50 +00:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2022-10-25 19:17:54 +00:00
|
|
|
static inline bool __bvec_gap_to_prev(const struct queue_limits *lim,
|
2018-09-24 07:43:49 +00:00
|
|
|
struct bio_vec *bprv, unsigned int offset)
|
|
|
|
{
|
2022-07-27 16:23:00 +00:00
|
|
|
return (offset & lim->virt_boundary_mask) ||
|
|
|
|
((bprv->bv_offset + bprv->bv_len) & lim->virt_boundary_mask);
|
2018-09-24 07:43:49 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check if adding a bio_vec after bprv with offset would create a gap in
|
|
|
|
* the SG list. Most drivers don't care about this, but some do.
|
|
|
|
*/
|
2022-10-25 19:17:54 +00:00
|
|
|
static inline bool bvec_gap_to_prev(const struct queue_limits *lim,
|
2018-09-24 07:43:49 +00:00
|
|
|
struct bio_vec *bprv, unsigned int offset)
|
|
|
|
{
|
2022-07-27 16:23:00 +00:00
|
|
|
if (!lim->virt_boundary_mask)
|
2018-09-24 07:43:49 +00:00
|
|
|
return false;
|
2022-07-27 16:23:00 +00:00
|
|
|
return __bvec_gap_to_prev(lim, bprv, offset);
|
2018-09-24 07:43:49 +00:00
|
|
|
}
|
|
|
|
|
2021-09-20 12:33:26 +00:00
|
|
|
static inline bool rq_mergeable(struct request *rq)
|
|
|
|
{
|
|
|
|
if (blk_rq_is_passthrough(rq))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (req_op(rq) == REQ_OP_FLUSH)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (req_op(rq) == REQ_OP_WRITE_ZEROES)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (req_op(rq) == REQ_OP_ZONE_APPEND)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (rq->cmd_flags & REQ_NOMERGE_FLAGS)
|
|
|
|
return false;
|
|
|
|
if (rq->rq_flags & RQF_NOMERGE_FLAGS)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* There are two different ways to handle DISCARD merges:
|
|
|
|
* 1) If max_discard_segments > 1, the driver treats every bio as a range and
|
|
|
|
* send the bios to controller together. The ranges don't need to be
|
|
|
|
* contiguous.
|
|
|
|
* 2) Otherwise, the request will be normal read/write requests. The ranges
|
|
|
|
* need to be contiguous.
|
|
|
|
*/
|
|
|
|
static inline bool blk_discard_mergable(struct request *req)
|
|
|
|
{
|
|
|
|
if (req_op(req) == REQ_OP_DISCARD &&
|
|
|
|
queue_max_discard_segments(req->q) > 1)
|
|
|
|
return true;
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2023-03-01 00:06:55 +00:00
|
|
|
static inline unsigned int blk_rq_get_max_segments(struct request *rq)
|
|
|
|
{
|
|
|
|
if (req_op(rq) == REQ_OP_DISCARD)
|
|
|
|
return queue_max_discard_segments(rq->q);
|
|
|
|
return queue_max_segments(rq->q);
|
|
|
|
}
|
|
|
|
|
2024-06-20 12:53:50 +00:00
|
|
|
static inline unsigned int blk_queue_get_max_sectors(struct request *rq)
|
2022-06-14 09:09:34 +00:00
|
|
|
{
|
2024-06-20 12:53:50 +00:00
|
|
|
struct request_queue *q = rq->q;
|
|
|
|
enum req_op op = req_op(rq);
|
|
|
|
|
2022-06-14 09:09:34 +00:00
|
|
|
if (unlikely(op == REQ_OP_DISCARD || op == REQ_OP_SECURE_ERASE))
|
|
|
|
return min(q->limits.max_discard_sectors,
|
|
|
|
UINT_MAX >> SECTOR_SHIFT);
|
|
|
|
|
|
|
|
if (unlikely(op == REQ_OP_WRITE_ZEROES))
|
|
|
|
return q->limits.max_write_zeroes_sectors;
|
|
|
|
|
block: Add core atomic write support
Add atomic write support, as follows:
- add helper functions to get request_queue atomic write limits
- report request_queue atomic write support limits to sysfs and update Doc
- support to safely merge atomic writes
- deal with splitting atomic writes
- misc helper functions
- add a per-request atomic write flag
New request_queue limits are added, as follows:
- atomic_write_hw_max is set by the block driver and is the maximum length
of an atomic write which the device may support. It is not
necessarily a power-of-2.
- atomic_write_max_sectors is derived from atomic_write_hw_max_sectors and
max_hw_sectors. It is always a power-of-2. Atomic writes may be merged,
and atomic_write_max_sectors would be the limit on a merged atomic write
request size. This value is not capped at max_sectors, as the value in
max_sectors can be controlled from userspace, and it would only cause
trouble if userspace could limit atomic_write_unit_max_bytes and the
other atomic write limits.
- atomic_write_hw_unit_{min,max} are set by the block driver and are the
min/max length of an atomic write unit which the device may support. They
both must be a power-of-2. Typically atomic_write_hw_unit_max will hold
the same value as atomic_write_hw_max.
- atomic_write_unit_{min,max} are derived from
atomic_write_hw_unit_{min,max}, max_hw_sectors, and block core limits.
Both min and max values must be a power-of-2.
- atomic_write_hw_boundary is set by the block driver. If non-zero, it
indicates an LBA space boundary at which an atomic write straddles no
longer is atomically executed by the disk. The value must be a
power-of-2. Note that it would be acceptable to enforce a rule that
atomic_write_hw_boundary_sectors is a multiple of
atomic_write_hw_unit_max, but the resultant code would be more
complicated.
All atomic writes limits are by default set 0 to indicate no atomic write
support. Even though it is assumed by Linux that a logical block can always
be atomically written, we ignore this as it is not of particular interest.
Stacked devices are just not supported either for now.
An atomic write must always be submitted to the block driver as part of a
single request. As such, only a single BIO must be submitted to the block
layer for an atomic write. When a single atomic write BIO is submitted, it
cannot be split. As such, atomic_write_unit_{max, min}_bytes are limited
by the maximum guaranteed BIO size which will not be required to be split.
This max size is calculated by request_queue max segments and the number
of bvecs a BIO can fit, BIO_MAX_VECS. Currently we rely on userspace
issuing a write with iovcnt=1 for pwritev2() - as such, we can rely on each
segment containing PAGE_SIZE of data, apart from the first+last, which each
can fit logical block size of data. The first+last will be LBS
length/aligned as we rely on direct IO alignment rules also.
New sysfs files are added to report the following atomic write limits:
- atomic_write_unit_max_bytes - same as atomic_write_unit_max_sectors in
bytes
- atomic_write_unit_min_bytes - same as atomic_write_unit_min_sectors in
bytes
- atomic_write_boundary_bytes - same as atomic_write_hw_boundary_sectors in
bytes
- atomic_write_max_bytes - same as atomic_write_max_sectors in bytes
Atomic writes may only be merged with other atomic writes and only under
the following conditions:
- total resultant request length <= atomic_write_max_bytes
- the merged write does not straddle a boundary
Helper function bdev_can_atomic_write() is added to indicate whether
atomic writes may be issued to a bdev. If a bdev is a partition, the
partition start must be aligned with both atomic_write_unit_min_sectors
and atomic_write_hw_boundary_sectors.
FSes will rely on the block layer to validate that an atomic write BIO
submitted will be of valid size, so add blk_validate_atomic_write_op_size()
for this purpose. Userspace expects an atomic write which is of invalid
size to be rejected with -EINVAL, so add BLK_STS_INVAL for this. Also use
BLK_STS_INVAL for when a BIO needs to be split, as this should mean an
invalid size BIO.
Flag REQ_ATOMIC is used for indicating an atomic write.
Co-developed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-20 12:53:54 +00:00
|
|
|
if (rq->cmd_flags & REQ_ATOMIC)
|
|
|
|
return q->limits.atomic_write_max_sectors;
|
|
|
|
|
2022-06-14 09:09:34 +00:00
|
|
|
return q->limits.max_sectors;
|
|
|
|
}
|
|
|
|
|
2015-10-21 17:20:23 +00:00
|
|
|
#ifdef CONFIG_BLK_DEV_INTEGRITY
|
|
|
|
void blk_flush_integrity(void);
|
2019-12-05 02:09:01 +00:00
|
|
|
void bio_integrity_free(struct bio *bio);
|
2024-07-02 15:10:23 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Integrity payloads can either be owned by the submitter, in which case
|
|
|
|
* bio_uninit will free them, or owned and generated by the block layer,
|
|
|
|
* in which case we'll verify them here (for reads) and free them before
|
|
|
|
* the bio is handed back to the submitted.
|
|
|
|
*/
|
|
|
|
bool __bio_integrity_endio(struct bio *bio);
|
2017-07-03 22:58:43 +00:00
|
|
|
static inline bool bio_integrity_endio(struct bio *bio)
|
|
|
|
{
|
2024-07-02 15:10:23 +00:00
|
|
|
struct bio_integrity_payload *bip = bio_integrity(bio);
|
|
|
|
|
|
|
|
if (bip && (bip->bip_flags & BIP_BLOCK_INTEGRITY))
|
2017-07-03 22:58:43 +00:00
|
|
|
return __bio_integrity_endio(bio);
|
|
|
|
return true;
|
|
|
|
}
|
2018-09-24 07:43:47 +00:00
|
|
|
|
2020-10-06 07:07:17 +00:00
|
|
|
bool blk_integrity_merge_rq(struct request_queue *, struct request *,
|
|
|
|
struct request *);
|
2020-10-06 07:07:18 +00:00
|
|
|
bool blk_integrity_merge_bio(struct request_queue *, struct request *,
|
|
|
|
struct bio *);
|
2020-10-06 07:07:17 +00:00
|
|
|
|
2018-09-24 07:43:47 +00:00
|
|
|
static inline bool integrity_req_gap_back_merge(struct request *req,
|
|
|
|
struct bio *next)
|
|
|
|
{
|
|
|
|
struct bio_integrity_payload *bip = bio_integrity(req->bio);
|
|
|
|
struct bio_integrity_payload *bip_next = bio_integrity(next);
|
|
|
|
|
2022-07-27 16:23:00 +00:00
|
|
|
return bvec_gap_to_prev(&req->q->limits,
|
|
|
|
&bip->bip_vec[bip->bip_vcnt - 1],
|
2018-09-24 07:43:47 +00:00
|
|
|
bip_next->bip_vec[0].bv_offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool integrity_req_gap_front_merge(struct request *req,
|
|
|
|
struct bio *bio)
|
|
|
|
{
|
|
|
|
struct bio_integrity_payload *bip = bio_integrity(bio);
|
|
|
|
struct bio_integrity_payload *bip_next = bio_integrity(req->bio);
|
|
|
|
|
2022-07-27 16:23:00 +00:00
|
|
|
return bvec_gap_to_prev(&req->q->limits,
|
|
|
|
&bip->bip_vec[bip->bip_vcnt - 1],
|
2018-09-24 07:43:47 +00:00
|
|
|
bip_next->bip_vec[0].bv_offset);
|
|
|
|
}
|
2020-03-25 15:48:41 +00:00
|
|
|
|
2023-03-18 17:36:25 +00:00
|
|
|
extern const struct attribute_group blk_integrity_attr_group;
|
2018-09-24 07:43:47 +00:00
|
|
|
#else /* CONFIG_BLK_DEV_INTEGRITY */
|
2020-10-06 07:07:17 +00:00
|
|
|
static inline bool blk_integrity_merge_rq(struct request_queue *rq,
|
|
|
|
struct request *r1, struct request *r2)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
2020-10-06 07:07:18 +00:00
|
|
|
static inline bool blk_integrity_merge_bio(struct request_queue *rq,
|
|
|
|
struct request *r, struct bio *b)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
2018-09-24 07:43:47 +00:00
|
|
|
static inline bool integrity_req_gap_back_merge(struct request *req,
|
|
|
|
struct bio *next)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
static inline bool integrity_req_gap_front_merge(struct request *req,
|
|
|
|
struct bio *bio)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2015-10-21 17:20:23 +00:00
|
|
|
static inline void blk_flush_integrity(void)
|
|
|
|
{
|
|
|
|
}
|
2017-07-03 22:58:43 +00:00
|
|
|
static inline bool bio_integrity_endio(struct bio *bio)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
2019-12-05 02:09:01 +00:00
|
|
|
static inline void bio_integrity_free(struct bio *bio)
|
|
|
|
{
|
|
|
|
}
|
2018-09-24 07:43:47 +00:00
|
|
|
#endif /* CONFIG_BLK_DEV_INTEGRITY */
|
2008-01-29 13:51:59 +00:00
|
|
|
|
2014-05-13 21:10:52 +00:00
|
|
|
unsigned long blk_rq_timeout(unsigned long timeout);
|
2014-04-24 14:51:47 +00:00
|
|
|
void blk_add_timer(struct request *req);
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
|
|
|
|
2024-04-08 01:41:05 +00:00
|
|
|
enum bio_merge_status {
|
|
|
|
BIO_MERGE_OK,
|
|
|
|
BIO_MERGE_NONE,
|
|
|
|
BIO_MERGE_FAILED,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum bio_merge_status bio_attempt_back_merge(struct request *req,
|
|
|
|
struct bio *bio, unsigned int nr_segs);
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
|
|
|
bool blk_attempt_plug_merge(struct request_queue *q, struct bio *bio,
|
2021-11-23 16:04:41 +00:00
|
|
|
unsigned int nr_segs);
|
2020-08-28 02:52:55 +00:00
|
|
|
bool blk_bio_list_merge(struct request_queue *q, struct list_head *list,
|
|
|
|
struct bio *bio, unsigned int nr_segs);
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
|
|
|
|
2021-10-06 18:01:07 +00:00
|
|
|
/*
|
|
|
|
* Plug flush limits
|
|
|
|
*/
|
|
|
|
#define BLK_MAX_REQUEST_COUNT 32
|
|
|
|
#define BLK_PLUG_FLUSH_SIZE (128 * 1024)
|
|
|
|
|
2009-04-23 02:05:18 +00:00
|
|
|
/*
|
|
|
|
* Internal elevator interface
|
|
|
|
*/
|
2016-10-20 13:12:13 +00:00
|
|
|
#define ELV_ON_HASH(rq) ((rq)->rq_flags & RQF_HASHED)
|
2009-04-23 02:05:18 +00:00
|
|
|
|
2023-05-19 04:40:46 +00:00
|
|
|
bool blk_insert_flush(struct request *rq);
|
2010-09-03 09:56:16 +00:00
|
|
|
|
2022-09-27 15:56:52 +00:00
|
|
|
int elevator_switch(struct request_queue *q, struct elevator_type *new_e);
|
2022-10-30 10:07:14 +00:00
|
|
|
void elevator_disable(struct request_queue *q);
|
2021-11-23 18:53:07 +00:00
|
|
|
void elevator_exit(struct request_queue *q);
|
block: split .sysfs_lock into two locks
The kernfs built-in lock of 'kn->count' is held in sysfs .show/.store
path. Meantime, inside block's .show/.store callback, q->sysfs_lock is
required.
However, when mq & iosched kobjects are removed via
blk_mq_unregister_dev() & elv_unregister_queue(), q->sysfs_lock is held
too. This way causes AB-BA lock because the kernfs built-in lock of
'kn-count' is required inside kobject_del() too, see the lockdep warning[1].
On the other hand, it isn't necessary to acquire q->sysfs_lock for
both blk_mq_unregister_dev() & elv_unregister_queue() because
clearing REGISTERED flag prevents storing to 'queue/scheduler'
from being happened. Also sysfs write(store) is exclusive, so no
necessary to hold the lock for elv_unregister_queue() when it is
called in switching elevator path.
So split .sysfs_lock into two: one is still named as .sysfs_lock for
covering sync .store, the other one is named as .sysfs_dir_lock
for covering kobjects and related status change.
sysfs itself can handle the race between add/remove kobjects and
showing/storing attributes under kobjects. For switching scheduler
via storing to 'queue/scheduler', we use the queue flag of
QUEUE_FLAG_REGISTERED with .sysfs_lock for avoiding the race, then
we can avoid to hold .sysfs_lock during removing/adding kobjects.
[1] lockdep warning
======================================================
WARNING: possible circular locking dependency detected
5.3.0-rc3-00044-g73277fc75ea0 #1380 Not tainted
------------------------------------------------------
rmmod/777 is trying to acquire lock:
00000000ac50e981 (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x59/0x72
but task is already holding lock:
00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&q->sysfs_lock){+.+.}:
__lock_acquire+0x95f/0xa2f
lock_acquire+0x1b4/0x1e8
__mutex_lock+0x14a/0xa9b
blk_mq_hw_sysfs_show+0x63/0xb6
sysfs_kf_seq_show+0x11f/0x196
seq_read+0x2cd/0x5f2
vfs_read+0xc7/0x18c
ksys_read+0xc4/0x13e
do_syscall_64+0xa7/0x295
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (kn->count#202){++++}:
check_prev_add+0x5d2/0xc45
validate_chain+0xed3/0xf94
__lock_acquire+0x95f/0xa2f
lock_acquire+0x1b4/0x1e8
__kernfs_remove+0x237/0x40b
kernfs_remove_by_name_ns+0x59/0x72
remove_files+0x61/0x96
sysfs_remove_group+0x81/0xa4
sysfs_remove_groups+0x3b/0x44
kobject_del+0x44/0x94
blk_mq_unregister_dev+0x83/0xdd
blk_unregister_queue+0xa0/0x10b
del_gendisk+0x259/0x3fa
null_del_dev+0x8b/0x1c3 [null_blk]
null_exit+0x5c/0x95 [null_blk]
__se_sys_delete_module+0x204/0x337
do_syscall_64+0xa7/0x295
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->sysfs_lock);
lock(kn->count#202);
lock(&q->sysfs_lock);
lock(kn->count#202);
*** DEADLOCK ***
2 locks held by rmmod/777:
#0: 00000000e69bd9de (&lock){+.+.}, at: null_exit+0x2e/0x95 [null_blk]
#1: 00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b
stack backtrace:
CPU: 0 PID: 777 Comm: rmmod Not tainted 5.3.0-rc3-00044-g73277fc75ea0 #1380
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180724_192412-buildhw-07.phx4
Call Trace:
dump_stack+0x9a/0xe6
check_noncircular+0x207/0x251
? print_circular_bug+0x32a/0x32a
? find_usage_backwards+0x84/0xb0
check_prev_add+0x5d2/0xc45
validate_chain+0xed3/0xf94
? check_prev_add+0xc45/0xc45
? mark_lock+0x11b/0x804
? check_usage_forwards+0x1ca/0x1ca
__lock_acquire+0x95f/0xa2f
lock_acquire+0x1b4/0x1e8
? kernfs_remove_by_name_ns+0x59/0x72
__kernfs_remove+0x237/0x40b
? kernfs_remove_by_name_ns+0x59/0x72
? kernfs_next_descendant_post+0x7d/0x7d
? strlen+0x10/0x23
? strcmp+0x22/0x44
kernfs_remove_by_name_ns+0x59/0x72
remove_files+0x61/0x96
sysfs_remove_group+0x81/0xa4
sysfs_remove_groups+0x3b/0x44
kobject_del+0x44/0x94
blk_mq_unregister_dev+0x83/0xdd
blk_unregister_queue+0xa0/0x10b
del_gendisk+0x259/0x3fa
? disk_events_poll_msecs_store+0x12b/0x12b
? check_flags+0x1ea/0x204
? mark_held_locks+0x1f/0x7a
null_del_dev+0x8b/0x1c3 [null_blk]
null_exit+0x5c/0x95 [null_blk]
__se_sys_delete_module+0x204/0x337
? free_module+0x39f/0x39f
? blkcg_maybe_throttle_current+0x8a/0x718
? rwlock_bug+0x62/0x62
? __blkcg_punt_bio_submit+0xd0/0xd0
? trace_hardirqs_on_thunk+0x1a/0x20
? mark_held_locks+0x1f/0x7a
? do_syscall_64+0x4c/0x295
do_syscall_64+0xa7/0x295
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fb696cdbe6b
Code: 73 01 c3 48 8b 0d 1d 20 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 008
RSP: 002b:00007ffec9588788 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 0000559e589137c0 RCX: 00007fb696cdbe6b
RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559e58913828
RBP: 0000000000000000 R08: 00007ffec9587701 R09: 0000000000000000
R10: 00007fb696d4eae0 R11: 0000000000000206 R12: 00007ffec95889b0
R13: 00007ffec95896b3 R14: 0000559e58913260 R15: 0000559e589137c0
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27 11:01:48 +00:00
|
|
|
int elv_register_queue(struct request_queue *q, bool uevent);
|
2018-01-17 19:48:08 +00:00
|
|
|
void elv_unregister_queue(struct request_queue *q);
|
|
|
|
|
2020-03-24 07:25:13 +00:00
|
|
|
ssize_t part_size_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf);
|
|
|
|
ssize_t part_stat_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf);
|
|
|
|
ssize_t part_inflight_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf);
|
|
|
|
ssize_t part_fail_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf);
|
|
|
|
ssize_t part_fail_store(struct device *dev, struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count);
|
2008-09-14 12:56:33 +00:00
|
|
|
ssize_t part_timeout_show(struct device *, struct device_attribute *, char *);
|
|
|
|
ssize_t part_timeout_store(struct device *, struct device_attribute *,
|
|
|
|
const char *, size_t);
|
|
|
|
|
2024-08-26 17:37:54 +00:00
|
|
|
struct bio *bio_split_discard(struct bio *bio, const struct queue_limits *lim,
|
|
|
|
unsigned *nsegs);
|
|
|
|
struct bio *bio_split_write_zeroes(struct bio *bio,
|
|
|
|
const struct queue_limits *lim, unsigned *nsegs);
|
|
|
|
struct bio *bio_split_rw(struct bio *bio, const struct queue_limits *lim,
|
|
|
|
unsigned *nr_segs);
|
2024-08-26 17:37:56 +00:00
|
|
|
struct bio *bio_split_zone_append(struct bio *bio,
|
|
|
|
const struct queue_limits *lim, unsigned *nr_segs);
|
2024-08-26 17:37:54 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* All drivers must accept single-segments bios that are smaller than PAGE_SIZE.
|
|
|
|
*
|
|
|
|
* This is a quick and dirty check that relies on the fact that bi_io_vec[0] is
|
|
|
|
* always valid if a bio has data. The check might lead to occasional false
|
|
|
|
* positives when bios are cloned, but compared to the performance impact of
|
|
|
|
* cloned bios themselves the loop below doesn't matter anyway.
|
|
|
|
*/
|
|
|
|
static inline bool bio_may_need_split(struct bio *bio,
|
|
|
|
const struct queue_limits *lim)
|
|
|
|
{
|
|
|
|
return lim->chunk_sectors || bio->bi_vcnt != 1 ||
|
|
|
|
bio->bi_io_vec->bv_len + bio->bi_io_vec->bv_offset > PAGE_SIZE;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* __bio_split_to_limits - split a bio to fit the queue limits
|
|
|
|
* @bio: bio to be split
|
|
|
|
* @lim: queue limits to split based on
|
|
|
|
* @nr_segs: returns the number of segments in the returned bio
|
|
|
|
*
|
|
|
|
* Check if @bio needs splitting based on the queue limits, and if so split off
|
|
|
|
* a bio fitting the limits from the beginning of @bio and return it. @bio is
|
|
|
|
* shortened to the remainder and re-submitted.
|
|
|
|
*
|
|
|
|
* The split bio is allocated from @q->bio_split, which is provided by the
|
|
|
|
* block layer.
|
|
|
|
*/
|
|
|
|
static inline struct bio *__bio_split_to_limits(struct bio *bio,
|
|
|
|
const struct queue_limits *lim, unsigned int *nr_segs)
|
2021-10-13 18:43:41 +00:00
|
|
|
{
|
|
|
|
switch (bio_op(bio)) {
|
2024-08-26 17:37:57 +00:00
|
|
|
case REQ_OP_READ:
|
|
|
|
case REQ_OP_WRITE:
|
2024-08-26 17:37:54 +00:00
|
|
|
if (bio_may_need_split(bio, lim))
|
|
|
|
return bio_split_rw(bio, lim, nr_segs);
|
|
|
|
*nr_segs = 1;
|
|
|
|
return bio;
|
2024-08-26 17:37:56 +00:00
|
|
|
case REQ_OP_ZONE_APPEND:
|
|
|
|
return bio_split_zone_append(bio, lim, nr_segs);
|
2021-10-13 18:43:41 +00:00
|
|
|
case REQ_OP_DISCARD:
|
|
|
|
case REQ_OP_SECURE_ERASE:
|
2024-08-26 17:37:54 +00:00
|
|
|
return bio_split_discard(bio, lim, nr_segs);
|
2021-10-13 18:43:41 +00:00
|
|
|
case REQ_OP_WRITE_ZEROES:
|
2024-08-26 17:37:54 +00:00
|
|
|
return bio_split_write_zeroes(bio, lim, nr_segs);
|
2024-08-26 17:37:57 +00:00
|
|
|
default:
|
|
|
|
/* other operations can't be split */
|
|
|
|
*nr_segs = 0;
|
|
|
|
return bio;
|
2021-10-13 18:43:41 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-06-06 10:29:01 +00:00
|
|
|
int ll_back_merge_fn(struct request *req, struct bio *bio,
|
|
|
|
unsigned int nr_segs);
|
2021-06-23 09:36:34 +00:00
|
|
|
bool blk_attempt_req_merge(struct request_queue *q, struct request *rq,
|
2011-03-21 09:14:27 +00:00
|
|
|
struct request *next);
|
2019-06-06 10:29:02 +00:00
|
|
|
unsigned int blk_recalc_rq_segments(struct request *rq);
|
2012-02-08 08:19:38 +00:00
|
|
|
bool blk_rq_merge_ok(struct request *rq, struct bio *bio);
|
2017-02-08 13:46:48 +00:00
|
|
|
enum elv_merge blk_try_merge(struct request *rq, struct bio *bio);
|
2008-01-29 13:04:06 +00:00
|
|
|
|
2024-02-13 07:34:14 +00:00
|
|
|
int blk_set_default_limits(struct queue_limits *lim);
|
2024-06-26 14:26:27 +00:00
|
|
|
void blk_apply_bdi_limits(struct backing_dev_info *bdi,
|
|
|
|
struct queue_limits *lim);
|
2008-03-04 10:23:45 +00:00
|
|
|
int blk_dev_init(void);
|
|
|
|
|
2009-04-24 06:10:11 +00:00
|
|
|
/*
|
|
|
|
* Contribute to IO statistics IFF:
|
|
|
|
*
|
|
|
|
* a) it's attached to a gendisk, and
|
2019-10-10 23:36:26 +00:00
|
|
|
* b) the queue had IO stats enabled when this request was started
|
2009-04-24 06:10:11 +00:00
|
|
|
*/
|
2018-08-16 14:51:40 +00:00
|
|
|
static inline bool blk_do_io_stat(struct request *rq)
|
2009-02-02 07:42:32 +00:00
|
|
|
{
|
2022-03-08 05:51:47 +00:00
|
|
|
return (rq->rq_flags & RQF_IO_STAT) && !blk_rq_is_passthrough(rq);
|
2021-10-09 12:25:41 +00:00
|
|
|
}
|
|
|
|
|
2021-11-17 06:14:01 +00:00
|
|
|
void update_io_ticks(struct block_device *part, unsigned long now, bool end);
|
block: support to account io_ticks precisely
Currently, io_ticks is accounted based on sampling, specifically
update_io_ticks() will always account io_ticks by 1 jiffies from
bdev_start_io_acct()/blk_account_io_start(), and the result can be
inaccurate, for example(HZ is 250):
Test script:
fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms
Test result: util is about 90%, while the disk is really idle.
This behaviour is introduced by commit 5b18b5a73760 ("block: delete
part_round_stats and switch to less precise counting"), however, there
was a key point that is missed that this patch also improve performance
a lot:
Before the commit:
part_round_stats:
if (part->stamp != now)
stats |= 1;
part_in_flight()
-> there can be lots of task here in 1 jiffies.
part_round_stats_single()
__part_stat_add()
part->stamp = now;
After the commit:
update_io_ticks:
stamp = part->bd_stamp;
if (time_after(now, stamp))
if (try_cmpxchg())
__part_stat_add()
-> only one task can reach here in 1 jiffies.
Hence in order to account io_ticks precisely, we only need to know if
there are IO inflight at most once in one jiffies. Noted that for
rq-based device, iterating tags should not be used here because
'tags->lock' is grabbed in blk_mq_find_and_get_req(), hence
part_stat_lock_inc/dec() and part_in_flight() is used to trace inflight.
The additional overhead is quite little:
- per cpu add/dec for each IO for rq-based device;
- per cpu sum for each jiffies;
And it's verified by null-blk that there are no performance degration
under heavy IO pressure.
Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240509123717.3223892-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-09 12:37:16 +00:00
|
|
|
unsigned int part_in_flight(struct block_device *part);
|
2009-02-02 07:42:32 +00:00
|
|
|
|
2017-02-08 13:46:47 +00:00
|
|
|
static inline void req_set_nomerge(struct request_queue *q, struct request *req)
|
|
|
|
{
|
|
|
|
req->cmd_flags |= REQ_NOMERGE;
|
|
|
|
if (req == q->last_merge)
|
|
|
|
q->last_merge = NULL;
|
|
|
|
}
|
|
|
|
|
2011-12-13 23:33:40 +00:00
|
|
|
/*
|
|
|
|
* Internal io_context interface
|
|
|
|
*/
|
2021-11-26 11:58:10 +00:00
|
|
|
struct io_cq *ioc_find_get_icq(struct request_queue *q);
|
2021-11-26 11:58:17 +00:00
|
|
|
struct io_cq *ioc_lookup_icq(struct request_queue *q);
|
2021-12-09 06:31:31 +00:00
|
|
|
#ifdef CONFIG_BLK_ICQ
|
2011-12-13 23:33:42 +00:00
|
|
|
void ioc_clear_queue(struct request_queue *q);
|
2021-12-09 06:31:31 +00:00
|
|
|
#else
|
|
|
|
static inline void ioc_clear_queue(struct request_queue *q)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_BLK_ICQ */
|
2011-12-13 23:33:40 +00:00
|
|
|
|
2022-07-27 16:22:56 +00:00
|
|
|
struct bio *__blk_queue_bounce(struct bio *bio, struct request_queue *q);
|
2021-03-31 07:30:00 +00:00
|
|
|
|
|
|
|
static inline bool blk_queue_may_bounce(struct request_queue *q)
|
|
|
|
{
|
|
|
|
return IS_ENABLED(CONFIG_BOUNCE) &&
|
2024-06-17 06:04:53 +00:00
|
|
|
(q->limits.features & BLK_FEAT_BOUNCE_HIGH) &&
|
2021-03-31 07:30:00 +00:00
|
|
|
max_low_pfn >= max_pfn;
|
|
|
|
}
|
|
|
|
|
2022-07-27 16:22:56 +00:00
|
|
|
static inline struct bio *blk_queue_bounce(struct bio *bio,
|
|
|
|
struct request_queue *q)
|
2017-06-19 07:26:21 +00:00
|
|
|
{
|
2022-07-27 16:22:56 +00:00
|
|
|
if (unlikely(blk_queue_may_bounce(q) && bio_has_data(bio)))
|
|
|
|
return __blk_queue_bounce(bio, q);
|
|
|
|
return bio;
|
2017-06-19 07:26:21 +00:00
|
|
|
}
|
|
|
|
|
2018-10-12 10:08:50 +00:00
|
|
|
#ifdef CONFIG_BLK_DEV_ZONED
|
block: Introduce zone write plugging
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-08 01:41:07 +00:00
|
|
|
void disk_init_zone_resources(struct gendisk *disk);
|
|
|
|
void disk_free_zone_resources(struct gendisk *disk);
|
|
|
|
static inline bool bio_zone_write_plugging(struct bio *bio)
|
|
|
|
{
|
|
|
|
return bio_flagged(bio, BIO_ZONE_WRITE_PLUGGING);
|
|
|
|
}
|
2024-04-08 01:41:10 +00:00
|
|
|
static inline bool bio_is_zone_append(struct bio *bio)
|
|
|
|
{
|
|
|
|
return bio_op(bio) == REQ_OP_ZONE_APPEND ||
|
|
|
|
bio_flagged(bio, BIO_EMULATES_ZONE_APPEND);
|
|
|
|
}
|
block: Introduce zone write plugging
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-08 01:41:07 +00:00
|
|
|
void blk_zone_write_plug_bio_merged(struct bio *bio);
|
2024-05-01 11:09:02 +00:00
|
|
|
void blk_zone_write_plug_init_request(struct request *rq);
|
2024-04-08 01:41:03 +00:00
|
|
|
static inline void blk_zone_update_request_bio(struct request *rq,
|
|
|
|
struct bio *bio)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* For zone append requests, the request sector indicates the location
|
|
|
|
* at which the BIO data was written. Return this value to the BIO
|
|
|
|
* issuer through the BIO iter sector.
|
2024-04-08 01:41:10 +00:00
|
|
|
* For plugged zone writes, which include emulated zone append, we need
|
|
|
|
* the original BIO sector so that blk_zone_write_plug_bio_endio() can
|
|
|
|
* lookup the zone write plug.
|
2024-04-08 01:41:03 +00:00
|
|
|
*/
|
block: Introduce zone write plugging
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-08 01:41:07 +00:00
|
|
|
if (req_op(rq) == REQ_OP_ZONE_APPEND || bio_zone_write_plugging(bio))
|
2024-04-08 01:41:03 +00:00
|
|
|
bio->bi_iter.bi_sector = rq->__sector;
|
|
|
|
}
|
block: Introduce zone write plugging
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-08 01:41:07 +00:00
|
|
|
void blk_zone_write_plug_bio_endio(struct bio *bio);
|
|
|
|
static inline void blk_zone_bio_endio(struct bio *bio)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* For write BIOs to zoned devices, signal the completion of the BIO so
|
|
|
|
* that the next write BIO can be submitted by zone write plugging.
|
|
|
|
*/
|
|
|
|
if (bio_zone_write_plugging(bio))
|
|
|
|
blk_zone_write_plug_bio_endio(bio);
|
|
|
|
}
|
|
|
|
|
2024-05-01 11:09:04 +00:00
|
|
|
void blk_zone_write_plug_finish_request(struct request *rq);
|
|
|
|
static inline void blk_zone_finish_request(struct request *rq)
|
block: Introduce zone write plugging
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-08 01:41:07 +00:00
|
|
|
{
|
|
|
|
if (rq->rq_flags & RQF_ZONE_WRITE_PLUGGING)
|
2024-05-01 11:09:04 +00:00
|
|
|
blk_zone_write_plug_finish_request(rq);
|
block: Introduce zone write plugging
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-08 01:41:07 +00:00
|
|
|
}
|
2023-06-08 11:02:54 +00:00
|
|
|
int blkdev_report_zones_ioctl(struct block_device *bdev, unsigned int cmd,
|
|
|
|
unsigned long arg);
|
2023-06-08 11:02:55 +00:00
|
|
|
int blkdev_zone_mgmt_ioctl(struct block_device *bdev, blk_mode_t mode,
|
2023-06-08 11:02:53 +00:00
|
|
|
unsigned int cmd, unsigned long arg);
|
|
|
|
#else /* CONFIG_BLK_DEV_ZONED */
|
block: Introduce zone write plugging
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-08 01:41:07 +00:00
|
|
|
static inline void disk_init_zone_resources(struct gendisk *disk)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
static inline void disk_free_zone_resources(struct gendisk *disk)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
static inline bool bio_zone_write_plugging(struct bio *bio)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
2024-04-08 01:41:10 +00:00
|
|
|
static inline bool bio_is_zone_append(struct bio *bio)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
block: Introduce zone write plugging
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-08 01:41:07 +00:00
|
|
|
static inline void blk_zone_write_plug_bio_merged(struct bio *bio)
|
|
|
|
{
|
|
|
|
}
|
2024-05-01 11:09:02 +00:00
|
|
|
static inline void blk_zone_write_plug_init_request(struct request *rq)
|
2024-04-08 01:41:03 +00:00
|
|
|
{
|
|
|
|
}
|
|
|
|
static inline void blk_zone_update_request_bio(struct request *rq,
|
|
|
|
struct bio *bio)
|
|
|
|
{
|
|
|
|
}
|
block: Introduce zone write plugging
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-08 01:41:07 +00:00
|
|
|
static inline void blk_zone_bio_endio(struct bio *bio)
|
|
|
|
{
|
|
|
|
}
|
2024-05-01 11:09:04 +00:00
|
|
|
static inline void blk_zone_finish_request(struct request *rq)
|
block: Introduce zone write plugging
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-08 01:41:07 +00:00
|
|
|
{
|
|
|
|
}
|
2023-06-08 11:02:53 +00:00
|
|
|
static inline int blkdev_report_zones_ioctl(struct block_device *bdev,
|
2023-06-08 11:02:54 +00:00
|
|
|
unsigned int cmd, unsigned long arg)
|
2023-06-08 11:02:53 +00:00
|
|
|
{
|
|
|
|
return -ENOTTY;
|
|
|
|
}
|
|
|
|
static inline int blkdev_zone_mgmt_ioctl(struct block_device *bdev,
|
2023-06-08 11:02:55 +00:00
|
|
|
blk_mode_t mode, unsigned int cmd, unsigned long arg)
|
2023-06-08 11:02:53 +00:00
|
|
|
{
|
|
|
|
return -ENOTTY;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_BLK_DEV_ZONED */
|
|
|
|
|
|
|
|
struct block_device *bdev_alloc(struct gendisk *disk, u8 partno);
|
|
|
|
void bdev_add(struct block_device *bdev, dev_t dev);
|
2024-04-28 23:01:39 +00:00
|
|
|
void bdev_unhash(struct block_device *bdev);
|
|
|
|
void bdev_drop(struct block_device *bdev);
|
2018-10-12 10:08:50 +00:00
|
|
|
|
2021-05-21 05:50:51 +00:00
|
|
|
int blk_alloc_ext_minor(void);
|
|
|
|
void blk_free_ext_minor(unsigned int minor);
|
2020-03-25 15:48:41 +00:00
|
|
|
#define ADDPART_FLAG_NONE 0
|
|
|
|
#define ADDPART_FLAG_RAID 1
|
|
|
|
#define ADDPART_FLAG_WHOLEDISK 2
|
2021-08-10 15:45:10 +00:00
|
|
|
int bdev_add_partition(struct gendisk *disk, int partno, sector_t start,
|
|
|
|
sector_t length);
|
2021-08-10 15:45:11 +00:00
|
|
|
int bdev_del_partition(struct gendisk *disk, int partno);
|
2021-08-10 15:45:12 +00:00
|
|
|
int bdev_resize_partition(struct gendisk *disk, int partno, sector_t start,
|
|
|
|
sector_t length);
|
2023-06-01 09:44:50 +00:00
|
|
|
void drop_partition(struct block_device *part);
|
2020-03-25 15:48:41 +00:00
|
|
|
|
2023-04-24 13:13:18 +00:00
|
|
|
void bdev_set_nr_sectors(struct block_device *bdev, sector_t sectors);
|
|
|
|
|
2022-06-19 06:05:51 +00:00
|
|
|
struct gendisk *__alloc_disk_node(struct request_queue *q, int node_id,
|
|
|
|
struct lock_class_key *lkclass);
|
|
|
|
|
2020-05-12 08:55:46 +00:00
|
|
|
int bio_add_hw_page(struct request_queue *q, struct bio *bio,
|
2020-03-27 17:48:37 +00:00
|
|
|
struct page *page, unsigned int len, unsigned int offset,
|
2020-05-12 08:55:46 +00:00
|
|
|
unsigned int max_sectors, bool *same_page);
|
2020-03-27 17:48:37 +00:00
|
|
|
|
2024-09-11 06:49:32 +00:00
|
|
|
int bio_add_hw_folio(struct request_queue *q, struct bio *bio,
|
|
|
|
struct folio *folio, size_t len, size_t offset,
|
|
|
|
unsigned int max_sectors, bool *same_page);
|
|
|
|
|
2023-05-22 20:57:42 +00:00
|
|
|
/*
|
|
|
|
* Clean up a page appropriately, where the page may be pinned, may have a
|
|
|
|
* ref taken on it or neither.
|
|
|
|
*/
|
|
|
|
static inline void bio_release_page(struct bio *bio, struct page *page)
|
|
|
|
{
|
|
|
|
if (bio_flagged(bio, BIO_PAGE_PINNED))
|
|
|
|
unpin_user_page(page);
|
|
|
|
}
|
|
|
|
|
2024-02-13 07:34:18 +00:00
|
|
|
struct request_queue *blk_alloc_queue(struct queue_limits *lim, int node_id);
|
2021-12-03 13:15:32 +00:00
|
|
|
|
2023-06-08 11:02:55 +00:00
|
|
|
int disk_scan_partitions(struct gendisk *disk, blk_mode_t mode);
|
2021-05-21 05:51:16 +00:00
|
|
|
|
2021-08-18 14:45:39 +00:00
|
|
|
int disk_alloc_events(struct gendisk *disk);
|
2021-06-24 07:38:42 +00:00
|
|
|
void disk_add_events(struct gendisk *disk);
|
|
|
|
void disk_del_events(struct gendisk *disk);
|
|
|
|
void disk_release_events(struct gendisk *disk);
|
2022-01-24 09:39:11 +00:00
|
|
|
void disk_block_events(struct gendisk *disk);
|
|
|
|
void disk_unblock_events(struct gendisk *disk);
|
|
|
|
void disk_flush_events(struct gendisk *disk, unsigned int mask);
|
2021-06-24 07:38:43 +00:00
|
|
|
extern struct device_attribute dev_attr_events;
|
|
|
|
extern struct device_attribute dev_attr_events_async;
|
|
|
|
extern struct device_attribute dev_attr_events_poll_msecs;
|
2021-06-24 07:38:42 +00:00
|
|
|
|
2022-06-28 17:18:45 +00:00
|
|
|
extern struct attribute_group blk_trace_attr_group;
|
|
|
|
|
2023-06-08 11:02:55 +00:00
|
|
|
blk_mode_t file_to_blk_mode(struct file *file);
|
|
|
|
int truncate_bdev_range(struct block_device *bdev, blk_mode_t mode,
|
|
|
|
loff_t lstart, loff_t lend);
|
2021-10-12 10:44:50 +00:00
|
|
|
long blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg);
|
block: implement async io_uring discard cmd
io_uring allows implementing custom file specific asynchronous
operations via the fops->uring_cmd callback, a.k.a. IORING_OP_URING_CMD
requests or just io_uring commands. Use it to add support for async
discards.
Normally, it first tries to queue up bios in a non-blocking context,
and if that fails, we'd retry from a blocking context by returning
-EAGAIN to the core io_uring. We always get the result from bios
asynchronously by setting a custom bi_end_io callback, at which point
we drag the request into the task context to either reissue or complete
it and post a completion to the user.
Unlike ioctl(BLKDISCARD) with stronger guarantees against races, we only
do a best effort attempt to invalidate page cache, and it can race with
any writes and reads and leave page cache stale. It's the same kind of
races we allow to direct writes.
Also, apart from cases where discarding is not allowed at all, e.g.
discards are not supported or the file/device is read only, the user
should assume that the sector range on disk is not valid anymore, even
when an error was returned to the user.
Suggested-by: Conrad Meyer <conradmeyer@meta.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2b5210443e4fa0257934f73dfafcc18a77cd0e09.1726072086.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-11 16:34:41 +00:00
|
|
|
int blkdev_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags);
|
2021-10-12 10:44:49 +00:00
|
|
|
long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg);
|
|
|
|
|
2021-09-07 14:13:02 +00:00
|
|
|
extern const struct address_space_operations def_blk_aops;
|
|
|
|
|
2022-06-29 06:20:13 +00:00
|
|
|
int disk_register_independent_access_ranges(struct gendisk *disk);
|
block: Add independent access ranges support
The Concurrent Positioning Ranges VPD page (for SCSI) and data log page
(for ATA) contain parameters describing the set of contiguous LBAs that
can be served independently by a single LUN multi-actuator hard-disk.
Similarly, a logically defined block device composed of multiple disks
can in some cases execute requests directed at different sector ranges
in parallel. A dm-linear device aggregating 2 block devices together is
an example.
This patch implements support for exposing a block device independent
access ranges to the user through sysfs to allow optimizing device
accesses to increase performance.
To describe the set of independent sector ranges of a device (actuators
of a multi-actuator HDDs or table entries of a dm-linear device),
The type struct blk_independent_access_ranges is introduced. This
structure describes the sector ranges using an array of
struct blk_independent_access_range structures. This range structure
defines the start sector and number of sectors of the access range.
The ranges in the array cannot overlap and must contain all sectors
within the device capacity.
The function disk_set_independent_access_ranges() allows a device
driver to signal to the block layer that a device has multiple
independent access ranges. In this case, a struct
blk_independent_access_ranges is attached to the device request queue
by the function disk_set_independent_access_ranges(). The function
disk_alloc_independent_access_ranges() is provided for drivers to
allocate this structure.
struct blk_independent_access_ranges contains kobjects (struct kobject)
to expose to the user through sysfs the set of independent access ranges
supported by a device. When the device is initialized, sysfs
registration of the ranges information is done from blk_register_queue()
using the block layer internal function
disk_register_independent_access_ranges(). If a driver calls
disk_set_independent_access_ranges() for a registered queue, e.g. when a
device is revalidated, disk_set_independent_access_ranges() will execute
disk_register_independent_access_ranges() to update the sysfs attribute
files. The sysfs file structure created starts from the
independent_access_ranges sub-directory and contains the start sector
and number of sectors of each range, with the information for each range
grouped in numbered sub-directories.
E.g. for a dual actuator HDD, the user sees:
$ tree /sys/block/sdk/queue/independent_access_ranges/
/sys/block/sdk/queue/independent_access_ranges/
|-- 0
| |-- nr_sectors
| `-- sector
`-- 1
|-- nr_sectors
`-- sector
For a regular device with a single access range, the
independent_access_ranges sysfs directory does not exist.
Device revalidation may lead to changes to this structure and to the
attribute values. When manipulated, the queue sysfs_lock and
sysfs_dir_lock mutexes are held for atomicity, similarly to how the
blk-mq and elevator sysfs queue sub-directories are protected.
The code related to the management of independent access ranges is
added in the new file block/blk-ia-ranges.c.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 02:22:19 +00:00
|
|
|
void disk_unregister_independent_access_ranges(struct gendisk *disk);
|
|
|
|
|
2021-11-17 06:13:58 +00:00
|
|
|
#ifdef CONFIG_FAIL_MAKE_REQUEST
|
|
|
|
bool should_fail_request(struct block_device *part, unsigned int bytes);
|
|
|
|
#else /* CONFIG_FAIL_MAKE_REQUEST */
|
|
|
|
static inline bool should_fail_request(struct block_device *part,
|
|
|
|
unsigned int bytes)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_FAIL_MAKE_REQUEST */
|
|
|
|
|
2021-10-14 20:39:59 +00:00
|
|
|
/*
|
|
|
|
* Optimized request reference counting. Ideally we'd make timeouts be more
|
|
|
|
* clever, as that's the only reason we need references at all... But until
|
|
|
|
* this happens, this is faster than using refcount_t. Also see:
|
|
|
|
*
|
|
|
|
* abc54d634334 ("io_uring: switch to atomic_t for io_kiocb reference count")
|
|
|
|
*/
|
|
|
|
#define req_ref_zero_or_close_to_overflow(req) \
|
|
|
|
((unsigned int) atomic_read(&(req->ref)) + 127u <= 127u)
|
|
|
|
|
|
|
|
static inline bool req_ref_inc_not_zero(struct request *req)
|
|
|
|
{
|
|
|
|
return atomic_inc_not_zero(&req->ref);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool req_ref_put_and_test(struct request *req)
|
|
|
|
{
|
|
|
|
WARN_ON_ONCE(req_ref_zero_or_close_to_overflow(req));
|
|
|
|
return atomic_dec_and_test(&req->ref);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void req_ref_set(struct request *req, int value)
|
|
|
|
{
|
|
|
|
atomic_set(&req->ref, value);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int req_ref_read(struct request *req)
|
|
|
|
{
|
|
|
|
return atomic_read(&req->ref);
|
|
|
|
}
|
|
|
|
|
2024-01-15 21:45:07 +00:00
|
|
|
static inline u64 blk_time_get_ns(void)
|
|
|
|
{
|
block: cache current nsec time in struct blk_plug
Querying the current time is the most costly thing we do in the block
layer per IO, and depending on kernel config settings, we may do it
many times per IO.
None of the callers actually need nsec granularity. Take advantage of
that by caching the current time in the plug, with the assumption here
being that any time checking will be temporally close enough that the
slight loss of precision doesn't matter.
If the block plug gets flushed, eg on preempt or schedule out, then
we invalidate the cached clock.
On a basic peak IOPS test case with iostats enabled, this changes
the performance from:
IOPS=108.41M, BW=52.93GiB/s, IOS/call=31/31
IOPS=108.43M, BW=52.94GiB/s, IOS/call=32/32
IOPS=108.29M, BW=52.88GiB/s, IOS/call=31/32
IOPS=108.35M, BW=52.91GiB/s, IOS/call=32/32
IOPS=108.42M, BW=52.94GiB/s, IOS/call=31/31
IOPS=108.40M, BW=52.93GiB/s, IOS/call=32/32
IOPS=108.31M, BW=52.89GiB/s, IOS/call=32/31
to
IOPS=118.79M, BW=58.00GiB/s, IOS/call=31/32
IOPS=118.62M, BW=57.92GiB/s, IOS/call=31/31
IOPS=118.80M, BW=58.01GiB/s, IOS/call=32/31
IOPS=118.78M, BW=58.00GiB/s, IOS/call=32/32
IOPS=118.69M, BW=57.95GiB/s, IOS/call=32/31
IOPS=118.62M, BW=57.92GiB/s, IOS/call=32/31
IOPS=118.63M, BW=57.92GiB/s, IOS/call=31/32
which is more than a 9% improvement in performance. Looking at perf diff,
we can see a huge reduction in time overhead:
10.55% -9.88% [kernel.vmlinux] [k] read_tsc
1.31% -1.22% [kernel.vmlinux] [k] ktime_get
Note that since this relies on blk_plug for the caching, it's only
applicable to the issue side. But this is where most of the time calls
happen anyway. On the completion side, cached time stamping is done with
struct io_comp patch, as long as the driver supports it.
It's also worth noting that the above testing doesn't enable any of the
higher cost CPU items on the block layer side, like wbt, cgroups,
iocost, etc, which all would add additional time querying and hence
overhead. IOW, results would likely look even better in comparison with
those enabled, as distros would do.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-15 21:46:03 +00:00
|
|
|
struct blk_plug *plug = current->plug;
|
|
|
|
|
2024-03-12 21:58:41 +00:00
|
|
|
if (!plug || !in_task())
|
block: cache current nsec time in struct blk_plug
Querying the current time is the most costly thing we do in the block
layer per IO, and depending on kernel config settings, we may do it
many times per IO.
None of the callers actually need nsec granularity. Take advantage of
that by caching the current time in the plug, with the assumption here
being that any time checking will be temporally close enough that the
slight loss of precision doesn't matter.
If the block plug gets flushed, eg on preempt or schedule out, then
we invalidate the cached clock.
On a basic peak IOPS test case with iostats enabled, this changes
the performance from:
IOPS=108.41M, BW=52.93GiB/s, IOS/call=31/31
IOPS=108.43M, BW=52.94GiB/s, IOS/call=32/32
IOPS=108.29M, BW=52.88GiB/s, IOS/call=31/32
IOPS=108.35M, BW=52.91GiB/s, IOS/call=32/32
IOPS=108.42M, BW=52.94GiB/s, IOS/call=31/31
IOPS=108.40M, BW=52.93GiB/s, IOS/call=32/32
IOPS=108.31M, BW=52.89GiB/s, IOS/call=32/31
to
IOPS=118.79M, BW=58.00GiB/s, IOS/call=31/32
IOPS=118.62M, BW=57.92GiB/s, IOS/call=31/31
IOPS=118.80M, BW=58.01GiB/s, IOS/call=32/31
IOPS=118.78M, BW=58.00GiB/s, IOS/call=32/32
IOPS=118.69M, BW=57.95GiB/s, IOS/call=32/31
IOPS=118.62M, BW=57.92GiB/s, IOS/call=32/31
IOPS=118.63M, BW=57.92GiB/s, IOS/call=31/32
which is more than a 9% improvement in performance. Looking at perf diff,
we can see a huge reduction in time overhead:
10.55% -9.88% [kernel.vmlinux] [k] read_tsc
1.31% -1.22% [kernel.vmlinux] [k] ktime_get
Note that since this relies on blk_plug for the caching, it's only
applicable to the issue side. But this is where most of the time calls
happen anyway. On the completion side, cached time stamping is done with
struct io_comp patch, as long as the driver supports it.
It's also worth noting that the above testing doesn't enable any of the
higher cost CPU items on the block layer side, like wbt, cgroups,
iocost, etc, which all would add additional time querying and hence
overhead. IOW, results would likely look even better in comparison with
those enabled, as distros would do.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-15 21:46:03 +00:00
|
|
|
return ktime_get_ns();
|
|
|
|
|
|
|
|
/*
|
|
|
|
* 0 could very well be a valid time, but rather than flag "this is
|
|
|
|
* a valid timestamp" separately, just accept that we'll do an extra
|
|
|
|
* ktime_get_ns() if we just happen to get 0 as the current time.
|
|
|
|
*/
|
2024-01-16 16:18:39 +00:00
|
|
|
if (!plug->cur_ktime) {
|
block: cache current nsec time in struct blk_plug
Querying the current time is the most costly thing we do in the block
layer per IO, and depending on kernel config settings, we may do it
many times per IO.
None of the callers actually need nsec granularity. Take advantage of
that by caching the current time in the plug, with the assumption here
being that any time checking will be temporally close enough that the
slight loss of precision doesn't matter.
If the block plug gets flushed, eg on preempt or schedule out, then
we invalidate the cached clock.
On a basic peak IOPS test case with iostats enabled, this changes
the performance from:
IOPS=108.41M, BW=52.93GiB/s, IOS/call=31/31
IOPS=108.43M, BW=52.94GiB/s, IOS/call=32/32
IOPS=108.29M, BW=52.88GiB/s, IOS/call=31/32
IOPS=108.35M, BW=52.91GiB/s, IOS/call=32/32
IOPS=108.42M, BW=52.94GiB/s, IOS/call=31/31
IOPS=108.40M, BW=52.93GiB/s, IOS/call=32/32
IOPS=108.31M, BW=52.89GiB/s, IOS/call=32/31
to
IOPS=118.79M, BW=58.00GiB/s, IOS/call=31/32
IOPS=118.62M, BW=57.92GiB/s, IOS/call=31/31
IOPS=118.80M, BW=58.01GiB/s, IOS/call=32/31
IOPS=118.78M, BW=58.00GiB/s, IOS/call=32/32
IOPS=118.69M, BW=57.95GiB/s, IOS/call=32/31
IOPS=118.62M, BW=57.92GiB/s, IOS/call=32/31
IOPS=118.63M, BW=57.92GiB/s, IOS/call=31/32
which is more than a 9% improvement in performance. Looking at perf diff,
we can see a huge reduction in time overhead:
10.55% -9.88% [kernel.vmlinux] [k] read_tsc
1.31% -1.22% [kernel.vmlinux] [k] ktime_get
Note that since this relies on blk_plug for the caching, it's only
applicable to the issue side. But this is where most of the time calls
happen anyway. On the completion side, cached time stamping is done with
struct io_comp patch, as long as the driver supports it.
It's also worth noting that the above testing doesn't enable any of the
higher cost CPU items on the block layer side, like wbt, cgroups,
iocost, etc, which all would add additional time querying and hence
overhead. IOW, results would likely look even better in comparison with
those enabled, as distros would do.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-15 21:46:03 +00:00
|
|
|
plug->cur_ktime = ktime_get_ns();
|
2024-01-16 16:18:39 +00:00
|
|
|
current->flags |= PF_BLOCK_TS;
|
|
|
|
}
|
block: cache current nsec time in struct blk_plug
Querying the current time is the most costly thing we do in the block
layer per IO, and depending on kernel config settings, we may do it
many times per IO.
None of the callers actually need nsec granularity. Take advantage of
that by caching the current time in the plug, with the assumption here
being that any time checking will be temporally close enough that the
slight loss of precision doesn't matter.
If the block plug gets flushed, eg on preempt or schedule out, then
we invalidate the cached clock.
On a basic peak IOPS test case with iostats enabled, this changes
the performance from:
IOPS=108.41M, BW=52.93GiB/s, IOS/call=31/31
IOPS=108.43M, BW=52.94GiB/s, IOS/call=32/32
IOPS=108.29M, BW=52.88GiB/s, IOS/call=31/32
IOPS=108.35M, BW=52.91GiB/s, IOS/call=32/32
IOPS=108.42M, BW=52.94GiB/s, IOS/call=31/31
IOPS=108.40M, BW=52.93GiB/s, IOS/call=32/32
IOPS=108.31M, BW=52.89GiB/s, IOS/call=32/31
to
IOPS=118.79M, BW=58.00GiB/s, IOS/call=31/32
IOPS=118.62M, BW=57.92GiB/s, IOS/call=31/31
IOPS=118.80M, BW=58.01GiB/s, IOS/call=32/31
IOPS=118.78M, BW=58.00GiB/s, IOS/call=32/32
IOPS=118.69M, BW=57.95GiB/s, IOS/call=32/31
IOPS=118.62M, BW=57.92GiB/s, IOS/call=32/31
IOPS=118.63M, BW=57.92GiB/s, IOS/call=31/32
which is more than a 9% improvement in performance. Looking at perf diff,
we can see a huge reduction in time overhead:
10.55% -9.88% [kernel.vmlinux] [k] read_tsc
1.31% -1.22% [kernel.vmlinux] [k] ktime_get
Note that since this relies on blk_plug for the caching, it's only
applicable to the issue side. But this is where most of the time calls
happen anyway. On the completion side, cached time stamping is done with
struct io_comp patch, as long as the driver supports it.
It's also worth noting that the above testing doesn't enable any of the
higher cost CPU items on the block layer side, like wbt, cgroups,
iocost, etc, which all would add additional time querying and hence
overhead. IOW, results would likely look even better in comparison with
those enabled, as distros would do.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-15 21:46:03 +00:00
|
|
|
return plug->cur_ktime;
|
2024-01-15 21:45:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline ktime_t blk_time_get(void)
|
|
|
|
{
|
|
|
|
return ns_to_ktime(blk_time_get_ns());
|
|
|
|
}
|
|
|
|
|
2024-01-16 21:14:59 +00:00
|
|
|
/*
|
|
|
|
* From most significant bit:
|
|
|
|
* 1 bit: reserved for other usage, see below
|
|
|
|
* 12 bits: original size of bio
|
|
|
|
* 51 bits: issue time of bio
|
|
|
|
*/
|
|
|
|
#define BIO_ISSUE_RES_BITS 1
|
|
|
|
#define BIO_ISSUE_SIZE_BITS 12
|
|
|
|
#define BIO_ISSUE_RES_SHIFT (64 - BIO_ISSUE_RES_BITS)
|
|
|
|
#define BIO_ISSUE_SIZE_SHIFT (BIO_ISSUE_RES_SHIFT - BIO_ISSUE_SIZE_BITS)
|
|
|
|
#define BIO_ISSUE_TIME_MASK ((1ULL << BIO_ISSUE_SIZE_SHIFT) - 1)
|
|
|
|
#define BIO_ISSUE_SIZE_MASK \
|
|
|
|
(((1ULL << BIO_ISSUE_SIZE_BITS) - 1) << BIO_ISSUE_SIZE_SHIFT)
|
|
|
|
#define BIO_ISSUE_RES_MASK (~((1ULL << BIO_ISSUE_RES_SHIFT) - 1))
|
|
|
|
|
|
|
|
/* Reserved bit for blk-throtl */
|
|
|
|
#define BIO_ISSUE_THROTL_SKIP_LATENCY (1ULL << 63)
|
|
|
|
|
|
|
|
static inline u64 __bio_issue_time(u64 time)
|
|
|
|
{
|
|
|
|
return time & BIO_ISSUE_TIME_MASK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u64 bio_issue_time(struct bio_issue *issue)
|
|
|
|
{
|
|
|
|
return __bio_issue_time(issue->value);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline sector_t bio_issue_size(struct bio_issue *issue)
|
|
|
|
{
|
|
|
|
return ((issue->value & BIO_ISSUE_SIZE_MASK) >> BIO_ISSUE_SIZE_SHIFT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void bio_issue_init(struct bio_issue *issue,
|
|
|
|
sector_t size)
|
|
|
|
{
|
|
|
|
size &= (1ULL << BIO_ISSUE_SIZE_BITS) - 1;
|
|
|
|
issue->value = ((issue->value & BIO_ISSUE_RES_MASK) |
|
2024-01-15 21:45:07 +00:00
|
|
|
(blk_time_get_ns() & BIO_ISSUE_TIME_MASK) |
|
2024-01-16 21:14:59 +00:00
|
|
|
((u64)size << BIO_ISSUE_SIZE_SHIFT));
|
|
|
|
}
|
|
|
|
|
2024-01-23 13:26:47 +00:00
|
|
|
void bdev_release(struct file *bdev_file);
|
2024-01-23 13:26:46 +00:00
|
|
|
int bdev_open(struct block_device *bdev, blk_mode_t mode, void *holder,
|
|
|
|
const struct blk_holder_ops *hops, struct file *bdev_file);
|
|
|
|
int bdev_permission(dev_t dev, blk_mode_t mode, void *holder);
|
for-6.9/block-20240310
-----BEGIN PGP SIGNATURE-----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=WlVL
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
2024-03-11 18:43:44 +00:00
|
|
|
|
2024-06-26 04:59:38 +00:00
|
|
|
void blk_integrity_generate(struct bio *bio);
|
|
|
|
void blk_integrity_verify(struct bio *bio);
|
2024-06-13 08:48:15 +00:00
|
|
|
void blk_integrity_prepare(struct request *rq);
|
|
|
|
void blk_integrity_complete(struct request *rq, unsigned int nr_bytes);
|
|
|
|
|
2011-10-19 12:31:18 +00:00
|
|
|
#endif /* BLK_INTERNAL_H */
|