Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-17 17:41:44 +00:00
Code Issues Packages Projects Releases Wiki Activity
b8f975545c
linux/net/dsa/Kconfig

64 lines
1.1 KiB
Plaintext
Raw Normal View History

dsa: Hide core config options; make drivers select what they need Commit 82167cb8c6b2f8166d5c7532e5ef4b5e0cc46a72 ('net: dsa/slave: Fix compilation warnings') fixed one possible invalid configuration (NET_DSA enabled with no trailer formats) but added others: drivers can select NET_DSA without its dependencies being met. It's not very useful to make either the DSA core or the tagging formats manually selectable without a driver to use them, so: 1. Define a hidden HAVE_NET_DSA option and move the dependencies of NET_DSA to that. While we're at it, drop the deprecated EXPERIMENTAL dependency. 2. Make NET_DSA and the drivers dependent on HAVE_NET_DSA. 3. Hide the tagging format options again. 4. Make drivers select both NET_DSA and the appropriate tagging format option. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 09:16:10 +00:00
config HAVE_NET_DSA
def_bool y
net: dsa: select NET_SWITCHDEV The support for DSA Ethernet switch chips depends on TCP/IP networking, thus explicit that HAVE_NET_DSA depends on INET. DSA uses SWITCHDEV, thus select it instead of depending on it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 21:49:26 +00:00
depends on INET && NETDEVICES && !S390
dsa: Hide core config options; make drivers select what they need Commit 82167cb8c6b2f8166d5c7532e5ef4b5e0cc46a72 ('net: dsa/slave: Fix compilation warnings') fixed one possible invalid configuration (NET_DSA enabled with no trailer formats) but added others: drivers can select NET_DSA without its dependencies being met. It's not very useful to make either the DSA core or the tagging formats manually selectable without a driver to use them, so: 1. Define a hidden HAVE_NET_DSA option and move the dependencies of NET_DSA to that. While we're at it, drop the deprecated EXPERIMENTAL dependency. 2. Make NET_DSA and the drivers dependent on HAVE_NET_DSA. 3. Hide the tagging format options again. 4. Make drivers select both NET_DSA and the appropriate tagging format option. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 09:16:10 +00:00
# Drivers must select NET_DSA and the appropriate tagging format
dsa: Move switch drivers to new directory drivers/net/dsa Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27 17:08:33 +00:00
config NET_DSA
net: dsa: make NET_DSA manually selectable from the config Change bd76a116707bd2381da36cf7c3183df11293f1d6 made all DSA drivers depend on NET_DSA rather than selecting them. However, as the only way to select this option was to actually select a driver, it made DSA impossible to enable at all. This patch adds an explicit entry which the user will have to enable prior selecting a driver. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-21 01:31:03 +00:00
tristate "Distributed Switch Architecture"
net: devlink: turn devlink into a built-in Being able to build devlink as a module causes growing pains. First all drivers had to add a meta dependency to make sure they are not built in when devlink is built as a module. Now we are struggling to invoke ethtool compat code reliably. Make devlink code built-in, users can still not build it at all but the dynamically loadable module option is removed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26 03:34:02 +00:00
depends on HAVE_NET_DSA
net: dsa: Fix dependencies on bridge DSA now uses one of the symbols exported by the bridge, br_vlan_enabled(). This has a stub, if the bridge is not enabled. However, if the bridge is enabled, we cannot have DSA built in and the bridge as a module, otherwise we get undefined symbols at link time: net/dsa/port.o: In function `dsa_port_vlan_add': net/dsa/port.c:255: undefined reference to `br_vlan_enabled' net/dsa/port.o: In function `dsa_port_vlan_del': net/dsa/port.c:270: undefined reference to `br_vlan_enabled' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11 15:29:41 +00:00
depends on BRIDGE || BRIDGE=n
net: dsa: select NET_SWITCHDEV The support for DSA Ethernet switch chips depends on TCP/IP networking, thus explicit that HAVE_NET_DSA depends on INET. DSA uses SWITCHDEV, thus select it instead of depending on it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 21:49:26 +00:00
select NET_SWITCHDEV
net: dsa: Add PHYLINK switch operations In preparation for adding support for PHYLINK within DSA, define a number of operations that we will need and that switch drivers can start implementing. Proper integration with PHYLINK will follow in subsequent patches. We start selecting PHYLINK (which implies PHYLIB) in net/dsa/Kconfig such that drivers can be guaranteed that this dependency is properly taken care of and can start referencing PHYLINK helper functions without requiring stubs or anything. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:32 +00:00
select PHYLINK
net: dsa: make NET_DSA manually selectable from the config Change bd76a116707bd2381da36cf7c3183df11293f1d6 made all DSA drivers depend on NET_DSA rather than selecting them. However, as the only way to select this option was to actually select a driver, it made DSA impossible to enable at all. This patch adds an explicit entry which the user will have to enable prior selecting a driver. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-21 01:31:03 +00:00
---help---
Say Y if you want to enable support for the hardware switches supported
by the Distributed Switch Architecture.
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
dsa: Hide core config options; make drivers select what they need Commit 82167cb8c6b2f8166d5c7532e5ef4b5e0cc46a72 ('net: dsa/slave: Fix compilation warnings') fixed one possible invalid configuration (NET_DSA enabled with no trailer formats) but added others: drivers can select NET_DSA without its dependencies being met. It's not very useful to make either the DSA core or the tagging formats manually selectable without a driver to use them, so: 1. Define a hidden HAVE_NET_DSA option and move the dependencies of NET_DSA to that. While we're at it, drop the deprecated EXPERIMENTAL dependency. 2. Make NET_DSA and the drivers dependent on HAVE_NET_DSA. 3. Hide the tagging format options again. 4. Make drivers select both NET_DSA and the appropriate tagging format option. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 09:16:10 +00:00
if NET_DSA
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
net: dsa: Allow compiling out legacy support Introduce a configuration option: CONFIG_NET_DSA_LEGACY allowing to compile out support for the old platform device and Device Tree binding registration. Support for these configurations is scheduled to be removed in 4.17. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-06 23:03:33 +00:00
config NET_DSA_LEGACY
bool "Support for older platform device and Device Tree registration"
default y
---help---
Say Y if you want to enable support for the older platform device and
deprecated Device Tree binding registration.
This feature is scheduled for removal in 4.17.
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
# tagging formats
net: dsa: add Broadcom tag RX/TX handler Add support for the 4-bytes Broadcom tag that built-in switches such as the Starfighter 2 might insert when receiving packets, or that we need to insert while targetting specific switch ports. We use a fake local EtherType value for this 4-bytes switch tag: ETH_P_BRCMTAG to make sure we can assign DSA-specific network operations within the DSA drivers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:55 +00:00
config NET_DSA_TAG_BRCM
bool
net: dsa: Support prepended Broadcom tag Add a new type: DSA_TAG_PROTO_PREPEND which allows us to support for the 4-bytes Broadcom tag that we already support, but in a format where it is pre-pended to the packet instead of located between the MAC SA and the Ethertyper (DSA_TAG_PROTO_BRCM). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10 23:22:54 +00:00
config NET_DSA_TAG_BRCM_PREPEND
bool
dsa: add support for original DSA tagging format Most of the DSA switches currently in the field do not support the Ethertype DSA tagging format that one of the previous patches added support for, but only the original DSA tagging format. The original DSA tagging format carries the same information as the Ethertype DSA tagging format, but with the difference that it does not have an ethertype field. In other words, when receiving a packet that is tagged with an original DSA tag, there is no way of telling in eth_type_trans() that this packet is in fact a DSA-tagged packet. This patch adds a hook into eth_type_trans() which is only compiled in if support for a switch chip that doesn't support Ethertype DSA is selected, and which checks whether there is a DSA switch driver instance attached to this network device which uses the old tag format. If so, it sets the protocol field to ETH_P_DSA without looking at the packet, so that the packet ends up in the right place. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:45:02 +00:00
config NET_DSA_TAG_DSA
dsa: Hide core config options; make drivers select what they need Commit 82167cb8c6b2f8166d5c7532e5ef4b5e0cc46a72 ('net: dsa/slave: Fix compilation warnings') fixed one possible invalid configuration (NET_DSA enabled with no trailer formats) but added others: drivers can select NET_DSA without its dependencies being met. It's not very useful to make either the DSA core or the tagging formats manually selectable without a driver to use them, so: 1. Define a hidden HAVE_NET_DSA option and move the dependencies of NET_DSA to that. While we're at it, drop the deprecated EXPERIMENTAL dependency. 2. Make NET_DSA and the drivers dependent on HAVE_NET_DSA. 3. Hide the tagging format options again. 4. Make drivers select both NET_DSA and the appropriate tagging format option. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 09:16:10 +00:00
bool
dsa: add support for original DSA tagging format Most of the DSA switches currently in the field do not support the Ethertype DSA tagging format that one of the previous patches added support for, but only the original DSA tagging format. The original DSA tagging format carries the same information as the Ethertype DSA tagging format, but with the difference that it does not have an ethertype field. In other words, when receiving a packet that is tagged with an original DSA tag, there is no way of telling in eth_type_trans() that this packet is in fact a DSA-tagged packet. This patch adds a hook into eth_type_trans() which is only compiled in if support for a switch chip that doesn't support Ethertype DSA is selected, and which checks whether there is a DSA switch driver instance attached to this network device which uses the old tag format. If so, it sets the protocol field to ETH_P_DSA without looking at the packet, so that the packet ends up in the right place. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:45:02 +00:00
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
config NET_DSA_TAG_EDSA
dsa: Hide core config options; make drivers select what they need Commit 82167cb8c6b2f8166d5c7532e5ef4b5e0cc46a72 ('net: dsa/slave: Fix compilation warnings') fixed one possible invalid configuration (NET_DSA enabled with no trailer formats) but added others: drivers can select NET_DSA without its dependencies being met. It's not very useful to make either the DSA core or the tagging formats manually selectable without a driver to use them, so: 1. Define a hidden HAVE_NET_DSA option and move the dependencies of NET_DSA to that. While we're at it, drop the deprecated EXPERIMENTAL dependency. 2. Make NET_DSA and the drivers dependent on HAVE_NET_DSA. 3. Hide the tagging format options again. 4. Make drivers select both NET_DSA and the appropriate tagging format option. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 09:16:10 +00:00
bool
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
net: dsa: Add Lantiq / Intel GSWIP tag support This handles the tag added by the PMAC on the VRX200 SoC line. The GSWIP uses internally a GSWIP special tag which is located after the Ethernet header. The PMAC which connects the GSWIP to the CPU converts this special tag used by the GSWIP into the PMAC special tag which is added in front of the Ethernet header. This was tested with GSWIP 2.1 found in the VRX200 SoCs, other GSWIP versions use slightly different PMAC special tags. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-09 20:16:43 +00:00
config NET_DSA_TAG_GSWIP
bool
dsa: add support for Microchip KSZ tail tagging Adding support for the Microchip KSZ switch family tail tagging. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31 20:19:06 +00:00
config NET_DSA_TAG_KSZ
bool
net: dsa: ksz: Rename NET_DSA_TAG_KSZ to _KSZ9477 Rename the tag Kconfig option and related macros in preparation for addition of new KSZ family switches with different tag formats. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15 00:58:04 +00:00
config NET_DSA_TAG_KSZ9477
bool
select NET_DSA_TAG_KSZ
net: dsa: Sort DSA tagging protocol drivers With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16 20:40:07 +00:00
config NET_DSA_TAG_LAN9303
dsa: Hide core config options; make drivers select what they need Commit 82167cb8c6b2f8166d5c7532e5ef4b5e0cc46a72 ('net: dsa/slave: Fix compilation warnings') fixed one possible invalid configuration (NET_DSA enabled with no trailer formats) but added others: drivers can select NET_DSA without its dependencies being met. It's not very useful to make either the DSA core or the tagging formats manually selectable without a driver to use them, so: 1. Define a hidden HAVE_NET_DSA option and move the dependencies of NET_DSA to that. While we're at it, drop the deprecated EXPERIMENTAL dependency. 2. Make NET_DSA and the drivers dependent on HAVE_NET_DSA. 3. Hide the tagging format options again. 4. Make drivers select both NET_DSA and the appropriate tagging format option. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 09:16:10 +00:00
bool
net: dsa: Sort DSA tagging protocol drivers With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16 20:40:07 +00:00
config NET_DSA_TAG_MTK
net-next: dsa: add Qualcomm tag RX/TX handler Add support for the 2-bytes Qualcomm tag that gigabit switches such as the QCA8337/N might insert when receiving packets, or that we need to insert while targeting specific switch ports. The tag is inserted directly behind the ethernet header. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-15 14:26:40 +00:00
bool
net: dsa: Sort DSA tagging protocol drivers With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16 20:40:07 +00:00
config NET_DSA_TAG_TRAILER
net-next: dsa: add Mediatek tag RX/TX handler Add the support for the 4-bytes tag for DSA port distinguishing inserted allowing receiving and transmitting the packet via the particular port. The tag is being added after the source MAC address in the ethernet header. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Landen Chao <Landen.Chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07 08:45:06 +00:00
bool
net: dsa: add support for the SMSC-LAN9303 tagging format To define the outgoing port and to discover the incoming port a regular VLAN tag is used by the LAN9303. But its VID meaning is 'special'. This tag handler/filter depends on some hardware features which must be enabled in the device to provide and make use of this special VLAN tag to control the destination and the source of an ethernet packet. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18 08:48:24 +00:00
net: dsa: Sort DSA tagging protocol drivers With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16 20:40:07 +00:00
config NET_DSA_TAG_QCA
net: dsa: add support for the SMSC-LAN9303 tagging format To define the outgoing port and to discover the incoming port a regular VLAN tag is used by the LAN9303. But its VID meaning is 'special'. This tag handler/filter depends on some hardware features which must be enabled in the device to provide and make use of this special VLAN tag to control the destination and the source of an ethernet packet. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18 08:48:24 +00:00
bool
dsa: Hide core config options; make drivers select what they need Commit 82167cb8c6b2f8166d5c7532e5ef4b5e0cc46a72 ('net: dsa/slave: Fix compilation warnings') fixed one possible invalid configuration (NET_DSA enabled with no trailer formats) but added others: drivers can select NET_DSA without its dependencies being met. It's not very useful to make either the DSA core or the tagging formats manually selectable without a driver to use them, so: 1. Define a hidden HAVE_NET_DSA option and move the dependencies of NET_DSA to that. While we're at it, drop the deprecated EXPERIMENTAL dependency. 2. Make NET_DSA and the drivers dependent on HAVE_NET_DSA. 3. Hide the tagging format options again. 4. Make drivers select both NET_DSA and the appropriate tagging format option. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 09:16:10 +00:00
endif
Reference in New Issue Copy Permalink