linux/drivers/macintosh/adb.c

899 lines
20 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Device driver for the Apple Desktop Bus
* and the /dev/adb device on macintoshes.
*
* Copyright (C) 1996 Paul Mackerras.
*
* Modified to declare controllers as structures, added
* client notification of bus reset and handles PowerBook
* sleep, by Benjamin Herrenschmidt.
*
* To do:
*
* - /sys/bus/adb to list the devices and infos
* - more /dev/adb to allow userland to receive the
* flow of auto-polling datas from a given device.
* - move bus probe to a kernel thread
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/sched/signal.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
#include <linux/notifier.h>
#include <linux/wait.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/kthread.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#ifdef CONFIG_PPC
#include <asm/prom.h>
#include <asm/machdep.h>
#endif
EXPORT_SYMBOL(adb_client_list);
extern struct adb_driver via_macii_driver;
extern struct adb_driver via_cuda_driver;
extern struct adb_driver adb_iop_driver;
extern struct adb_driver via_pmu_driver;
extern struct adb_driver macio_adb_driver;
static DEFINE_MUTEX(adb_mutex);
static struct adb_driver *adb_driver_list[] = {
#ifdef CONFIG_ADB_MACII
&via_macii_driver,
#endif
#ifdef CONFIG_ADB_CUDA
&via_cuda_driver,
#endif
#ifdef CONFIG_ADB_IOP
&adb_iop_driver,
#endif
#ifdef CONFIG_ADB_PMU
&via_pmu_driver,
#endif
#ifdef CONFIG_ADB_MACIO
&macio_adb_driver,
#endif
NULL
};
static struct class *adb_dev_class;
static struct adb_driver *adb_controller;
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
BLOCKING_NOTIFIER_HEAD(adb_client_list);
static int adb_got_sleep;
static int adb_inited;
static DEFINE_SEMAPHORE(adb_probe_mutex);
static int sleepy_trackpad;
static int autopoll_devs;
int __adb_probe_sync;
static int adb_scan_bus(void);
static int do_adb_reset_bus(void);
static void adbdev_init(void);
static int try_handler_change(int, int);
static struct adb_handler {
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
void (*handler)(unsigned char *, int, int);
int original_address;
int handler_id;
int busy;
} adb_handler[16];
/*
* The adb_handler_mutex mutex protects all accesses to the original_address
* and handler_id fields of adb_handler[i] for all i, and changes to the
* handler field.
* Accesses to the handler field are protected by the adb_handler_lock
* rwlock. It is held across all calls to any handler, so that by the
* time adb_unregister returns, we know that the old handler isn't being
* called.
*/
static DEFINE_MUTEX(adb_handler_mutex);
static DEFINE_RWLOCK(adb_handler_lock);
#if 0
static void printADBreply(struct adb_request *req)
{
int i;
printk("adb reply (%d)", req->reply_len);
for(i = 0; i < req->reply_len; i++)
printk(" %x", req->reply[i]);
printk("\n");
}
#endif
static int adb_scan_bus(void)
{
int i, highFree=0, noMovement;
int devmask = 0;
struct adb_request req;
/* assumes adb_handler[] is all zeroes at this point */
for (i = 1; i < 16; i++) {
/* see if there is anything at address i */
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(i << 4) | 0xf);
if (req.reply_len > 1)
/* one or more devices at this address */
adb_handler[i].original_address = i;
else if (i > highFree)
highFree = i;
}
/* Note we reset noMovement to 0 each time we move a device */
for (noMovement = 1; noMovement < 2 && highFree > 0; noMovement++) {
for (i = 1; i < 16; i++) {
if (adb_handler[i].original_address == 0)
continue;
/*
* Send a "talk register 3" command to address i
* to provoke a collision if there is more than
* one device at this address.
*/
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(i << 4) | 0xf);
/*
* Move the device(s) which didn't detect a
* collision to address `highFree'. Hopefully
* this only moves one device.
*/
adb_request(&req, NULL, ADBREQ_SYNC, 3,
(i<< 4) | 0xb, (highFree | 0x60), 0xfe);
/*
* See if anybody actually moved. This is suggested
* by HW TechNote 01:
*
* http://developer.apple.com/technotes/hw/hw_01.html
*/
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(highFree << 4) | 0xf);
if (req.reply_len <= 1) continue;
/*
* Test whether there are any device(s) left
* at address i.
*/
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(i << 4) | 0xf);
if (req.reply_len > 1) {
/*
* There are still one or more devices
* left at address i. Register the one(s)
* we moved to `highFree', and find a new
* value for highFree.
*/
adb_handler[highFree].original_address =
adb_handler[i].original_address;
while (highFree > 0 &&
adb_handler[highFree].original_address)
highFree--;
if (highFree <= 0)
break;
noMovement = 0;
} else {
/*
* No devices left at address i; move the
* one(s) we moved to `highFree' back to i.
*/
adb_request(&req, NULL, ADBREQ_SYNC, 3,
(highFree << 4) | 0xb,
(i | 0x60), 0xfe);
}
}
}
/* Now fill in the handler_id field of the adb_handler entries. */
for (i = 1; i < 16; i++) {
if (adb_handler[i].original_address == 0)
continue;
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(i << 4) | 0xf);
adb_handler[i].handler_id = req.reply[2];
printk(KERN_DEBUG "adb device [%d]: %d 0x%X\n", i,
adb_handler[i].original_address,
adb_handler[i].handler_id);
devmask |= 1 << i;
}
return devmask;
}
/*
* This kernel task handles ADB probing. It dies once probing is
* completed.
*/
static int
adb_probe_task(void *x)
{
pr_debug("adb: starting probe task...\n");
do_adb_reset_bus();
pr_debug("adb: finished probe task...\n");
up(&adb_probe_mutex);
return 0;
}
static void
__adb_probe_task(struct work_struct *bullshit)
{
kthread_run(adb_probe_task, NULL, "kadbprobe");
}
static DECLARE_WORK(adb_reset_work, __adb_probe_task);
int
adb_reset_bus(void)
{
if (__adb_probe_sync) {
do_adb_reset_bus();
return 0;
}
down(&adb_probe_mutex);
schedule_work(&adb_reset_work);
return 0;
}
#ifdef CONFIG_PM
/*
* notify clients before sleep
*/
static int __adb_suspend(struct platform_device *dev, pm_message_t state)
{
adb_got_sleep = 1;
/* We need to get a lock on the probe thread */
down(&adb_probe_mutex);
/* Stop autopoll */
if (adb_controller->autopoll)
adb_controller->autopoll(0);
blocking_notifier_call_chain(&adb_client_list, ADB_MSG_POWERDOWN, NULL);
return 0;
}
static int adb_suspend(struct device *dev)
{
return __adb_suspend(to_platform_device(dev), PMSG_SUSPEND);
}
static int adb_freeze(struct device *dev)
{
return __adb_suspend(to_platform_device(dev), PMSG_FREEZE);
}
static int adb_poweroff(struct device *dev)
{
return __adb_suspend(to_platform_device(dev), PMSG_HIBERNATE);
}
/*
* reset bus after sleep
*/
static int __adb_resume(struct platform_device *dev)
{
adb_got_sleep = 0;
up(&adb_probe_mutex);
adb_reset_bus();
return 0;
}
static int adb_resume(struct device *dev)
{
return __adb_resume(to_platform_device(dev));
}
#endif /* CONFIG_PM */
static int __init adb_init(void)
{
struct adb_driver *driver;
int i;
#ifdef CONFIG_PPC32
if (!machine_is(chrp) && !machine_is(powermac))
return 0;
#endif
#ifdef CONFIG_MAC
if (!MACH_IS_MAC)
return 0;
#endif
/* xmon may do early-init */
if (adb_inited)
return 0;
adb_inited = 1;
adb_controller = NULL;
i = 0;
while ((driver = adb_driver_list[i++]) != NULL) {
if (!driver->probe()) {
adb_controller = driver;
break;
}
}
if (adb_controller != NULL && adb_controller->init &&
adb_controller->init())
adb_controller = NULL;
if (adb_controller == NULL) {
pr_warn("Warning: no ADB interface detected\n");
} else {
#ifdef CONFIG_PPC
if (of_machine_is_compatible("AAPL,PowerBook1998") ||
of_machine_is_compatible("PowerBook1,1"))
sleepy_trackpad = 1;
#endif /* CONFIG_PPC */
adbdev_init();
adb_reset_bus();
}
return 0;
}
device_initcall(adb_init);
static int
do_adb_reset_bus(void)
{
int ret;
if (adb_controller == NULL)
return -ENXIO;
if (adb_controller->autopoll)
adb_controller->autopoll(0);
blocking_notifier_call_chain(&adb_client_list,
ADB_MSG_PRE_RESET, NULL);
if (sleepy_trackpad) {
/* Let the trackpad settle down */
msleep(500);
}
mutex_lock(&adb_handler_mutex);
write_lock_irq(&adb_handler_lock);
memset(adb_handler, 0, sizeof(adb_handler));
write_unlock_irq(&adb_handler_lock);
/* That one is still a bit synchronous, oh well... */
if (adb_controller->reset_bus)
ret = adb_controller->reset_bus();
else
ret = 0;
if (sleepy_trackpad) {
/* Let the trackpad settle down */
msleep(1500);
}
if (!ret) {
autopoll_devs = adb_scan_bus();
if (adb_controller->autopoll)
adb_controller->autopoll(autopoll_devs);
}
mutex_unlock(&adb_handler_mutex);
blocking_notifier_call_chain(&adb_client_list,
ADB_MSG_POST_RESET, NULL);
return ret;
}
void
adb_poll(void)
{
if ((adb_controller == NULL)||(adb_controller->poll == NULL))
return;
adb_controller->poll();
}
EXPORT_SYMBOL(adb_poll);
static void adb_sync_req_done(struct adb_request *req)
{
struct completion *comp = req->arg;
complete(comp);
}
int
adb_request(struct adb_request *req, void (*done)(struct adb_request *),
int flags, int nbytes, ...)
{
va_list list;
int i;
int rc;
struct completion comp;
if ((adb_controller == NULL) || (adb_controller->send_request == NULL))
return -ENXIO;
if (nbytes < 1)
return -EINVAL;
req->nbytes = nbytes+1;
req->done = done;
req->reply_expected = flags & ADBREQ_REPLY;
req->data[0] = ADB_PACKET;
va_start(list, nbytes);
for (i = 0; i < nbytes; ++i)
req->data[i+1] = va_arg(list, int);
va_end(list);
if (flags & ADBREQ_NOSEND)
return 0;
/* Synchronous requests block using an on-stack completion */
if (flags & ADBREQ_SYNC) {
WARN_ON(done);
req->done = adb_sync_req_done;
req->arg = &comp;
init_completion(&comp);
}
rc = adb_controller->send_request(req, 0);
if ((flags & ADBREQ_SYNC) && !rc && !req->complete)
wait_for_completion(&comp);
return rc;
}
EXPORT_SYMBOL(adb_request);
/* Ultimately this should return the number of devices with
the given default id.
And it does it now ! Note: changed behaviour: This function
will now register if default_id _and_ handler_id both match
but handler_id can be left to 0 to match with default_id only.
When handler_id is set, this function will try to adjust
the handler_id id it doesn't match. */
int
adb_register(int default_id, int handler_id, struct adb_ids *ids,
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
void (*handler)(unsigned char *, int, int))
{
int i;
mutex_lock(&adb_handler_mutex);
ids->nids = 0;
for (i = 1; i < 16; i++) {
if ((adb_handler[i].original_address == default_id) &&
(!handler_id || (handler_id == adb_handler[i].handler_id) ||
try_handler_change(i, handler_id))) {
if (adb_handler[i].handler != 0) {
pr_err("Two handlers for ADB device %d\n",
default_id);
continue;
}
write_lock_irq(&adb_handler_lock);
adb_handler[i].handler = handler;
write_unlock_irq(&adb_handler_lock);
ids->id[ids->nids++] = i;
}
}
mutex_unlock(&adb_handler_mutex);
return ids->nids;
}
EXPORT_SYMBOL(adb_register);
int
adb_unregister(int index)
{
int ret = -ENODEV;
mutex_lock(&adb_handler_mutex);
write_lock_irq(&adb_handler_lock);
if (adb_handler[index].handler) {
while(adb_handler[index].busy) {
write_unlock_irq(&adb_handler_lock);
yield();
write_lock_irq(&adb_handler_lock);
}
ret = 0;
adb_handler[index].handler = NULL;
}
write_unlock_irq(&adb_handler_lock);
mutex_unlock(&adb_handler_mutex);
return ret;
}
EXPORT_SYMBOL(adb_unregister);
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
adb_input(unsigned char *buf, int nb, int autopoll)
{
int i, id;
static int dump_adb_input;
unsigned long flags;
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
void (*handler)(unsigned char *, int, int);
/* We skip keystrokes and mouse moves when the sleep process
* has been started. We stop autopoll, but this is another security
*/
if (adb_got_sleep)
return;
id = buf[0] >> 4;
if (dump_adb_input) {
pr_info("adb packet: ");
for (i = 0; i < nb; ++i)
pr_cont(" %x", buf[i]);
pr_cont(", id = %d\n", id);
}
write_lock_irqsave(&adb_handler_lock, flags);
handler = adb_handler[id].handler;
if (handler != NULL)
adb_handler[id].busy = 1;
write_unlock_irqrestore(&adb_handler_lock, flags);
if (handler != NULL) {
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
(*handler)(buf, nb, autopoll);
wmb();
adb_handler[id].busy = 0;
}
}
/* Try to change handler to new_id. Will return 1 if successful. */
static int try_handler_change(int address, int new_id)
{
struct adb_request req;
if (adb_handler[address].handler_id == new_id)
return 1;
adb_request(&req, NULL, ADBREQ_SYNC, 3,
ADB_WRITEREG(address, 3), address | 0x20, new_id);
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
ADB_READREG(address, 3));
if (req.reply_len < 2)
return 0;
if (req.reply[2] != new_id)
return 0;
adb_handler[address].handler_id = req.reply[2];
return 1;
}
int
adb_try_handler_change(int address, int new_id)
{
int ret;
mutex_lock(&adb_handler_mutex);
ret = try_handler_change(address, new_id);
mutex_unlock(&adb_handler_mutex);
if (ret)
pr_debug("adb handler change: [%d] 0x%X\n", address, new_id);
return ret;
}
EXPORT_SYMBOL(adb_try_handler_change);
int
adb_get_infos(int address, int *original_address, int *handler_id)
{
mutex_lock(&adb_handler_mutex);
*original_address = adb_handler[address].original_address;
*handler_id = adb_handler[address].handler_id;
mutex_unlock(&adb_handler_mutex);
return (*original_address != 0);
}
/*
* /dev/adb device driver.
*/
#define ADB_MAJOR 56 /* major number for /dev/adb */
struct adbdev_state {
spinlock_t lock;
atomic_t n_pending;
struct adb_request *completed;
wait_queue_head_t wait_queue;
int inuse;
};
static void adb_write_done(struct adb_request *req)
{
struct adbdev_state *state = (struct adbdev_state *) req->arg;
unsigned long flags;
if (!req->complete) {
req->reply_len = 0;
req->complete = 1;
}
spin_lock_irqsave(&state->lock, flags);
atomic_dec(&state->n_pending);
if (!state->inuse) {
kfree(req);
if (atomic_read(&state->n_pending) == 0) {
spin_unlock_irqrestore(&state->lock, flags);
kfree(state);
return;
}
} else {
struct adb_request **ap = &state->completed;
while (*ap != NULL)
ap = &(*ap)->next;
req->next = NULL;
*ap = req;
wake_up_interruptible(&state->wait_queue);
}
spin_unlock_irqrestore(&state->lock, flags);
}
static int
do_adb_query(struct adb_request *req)
{
int ret = -EINVAL;
switch(req->data[1]) {
case ADB_QUERY_GETDEVINFO:
if (req->nbytes < 3)
break;
mutex_lock(&adb_handler_mutex);
req->reply[0] = adb_handler[req->data[2]].original_address;
req->reply[1] = adb_handler[req->data[2]].handler_id;
mutex_unlock(&adb_handler_mutex);
req->complete = 1;
req->reply_len = 2;
adb_write_done(req);
ret = 0;
break;
}
return ret;
}
static int adb_open(struct inode *inode, struct file *file)
{
struct adbdev_state *state;
int ret = 0;
mutex_lock(&adb_mutex);
if (iminor(inode) > 0 || adb_controller == NULL) {
ret = -ENXIO;
goto out;
}
state = kmalloc(sizeof(struct adbdev_state), GFP_KERNEL);
if (state == 0) {
ret = -ENOMEM;
goto out;
}
file->private_data = state;
spin_lock_init(&state->lock);
atomic_set(&state->n_pending, 0);
state->completed = NULL;
init_waitqueue_head(&state->wait_queue);
state->inuse = 1;
out:
mutex_unlock(&adb_mutex);
return ret;
}
static int adb_release(struct inode *inode, struct file *file)
{
struct adbdev_state *state = file->private_data;
unsigned long flags;
mutex_lock(&adb_mutex);
if (state) {
file->private_data = NULL;
spin_lock_irqsave(&state->lock, flags);
if (atomic_read(&state->n_pending) == 0
&& state->completed == NULL) {
spin_unlock_irqrestore(&state->lock, flags);
kfree(state);
} else {
state->inuse = 0;
spin_unlock_irqrestore(&state->lock, flags);
}
}
mutex_unlock(&adb_mutex);
return 0;
}
static ssize_t adb_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
int ret = 0;
struct adbdev_state *state = file->private_data;
struct adb_request *req;
DECLARE_WAITQUEUE(wait, current);
unsigned long flags;
if (count < 2)
return -EINVAL;
if (count > sizeof(req->reply))
count = sizeof(req->reply);
req = NULL;
spin_lock_irqsave(&state->lock, flags);
add_wait_queue(&state->wait_queue, &wait);
set_current_state(TASK_INTERRUPTIBLE);
for (;;) {
req = state->completed;
if (req != NULL)
state->completed = req->next;
else if (atomic_read(&state->n_pending) == 0)
ret = -EIO;
if (req != NULL || ret != 0)
break;
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
break;
}
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
spin_unlock_irqrestore(&state->lock, flags);
schedule();
spin_lock_irqsave(&state->lock, flags);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&state->wait_queue, &wait);
spin_unlock_irqrestore(&state->lock, flags);
if (ret)
return ret;
ret = req->reply_len;
if (ret > count)
ret = count;
if (ret > 0 && copy_to_user(buf, req->reply, ret))
ret = -EFAULT;
kfree(req);
return ret;
}
static ssize_t adb_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
int ret/*, i*/;
struct adbdev_state *state = file->private_data;
struct adb_request *req;
if (count < 2 || count > sizeof(req->data))
return -EINVAL;
if (adb_controller == NULL)
return -ENXIO;
[PATCH] getting rid of all casts of k[cmz]alloc() calls Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 08:35:56 +00:00
req = kmalloc(sizeof(struct adb_request),
GFP_KERNEL);
if (req == NULL)
return -ENOMEM;
req->nbytes = count;
req->done = adb_write_done;
req->arg = (void *) state;
req->complete = 0;
ret = -EFAULT;
if (copy_from_user(req->data, buf, count))
goto out;
atomic_inc(&state->n_pending);
/* If a probe is in progress or we are sleeping, wait for it to complete */
down(&adb_probe_mutex);
/* Queries are special requests sent to the ADB driver itself */
if (req->data[0] == ADB_QUERY) {
if (count > 1)
ret = do_adb_query(req);
else
ret = -EINVAL;
up(&adb_probe_mutex);
}
/* Special case for ADB_BUSRESET request, all others are sent to
the controller */
else if ((req->data[0] == ADB_PACKET) && (count > 1)
&& (req->data[1] == ADB_BUSRESET)) {
ret = do_adb_reset_bus();
up(&adb_probe_mutex);
atomic_dec(&state->n_pending);
if (ret == 0)
ret = count;
goto out;
} else {
req->reply_expected = ((req->data[1] & 0xc) == 0xc);
if (adb_controller && adb_controller->send_request)
ret = adb_controller->send_request(req, 0);
else
ret = -ENXIO;
up(&adb_probe_mutex);
}
if (ret != 0) {
atomic_dec(&state->n_pending);
goto out;
}
return count;
out:
kfree(req);
return ret;
}
static const struct file_operations adb_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = adb_read,
.write = adb_write,
.open = adb_open,
.release = adb_release,
};
#ifdef CONFIG_PM
static const struct dev_pm_ops adb_dev_pm_ops = {
.suspend = adb_suspend,
.resume = adb_resume,
/* Hibernate hooks */
.freeze = adb_freeze,
.thaw = adb_resume,
.poweroff = adb_poweroff,
.restore = adb_resume,
};
#endif
static struct platform_driver adb_pfdrv = {
.driver = {
.name = "adb",
#ifdef CONFIG_PM
.pm = &adb_dev_pm_ops,
#endif
},
};
static struct platform_device adb_pfdev = {
.name = "adb",
};
static int __init
adb_dummy_probe(struct platform_device *dev)
{
if (dev == &adb_pfdev)
return 0;
return -ENODEV;
}
static void __init
adbdev_init(void)
{
if (register_chrdev(ADB_MAJOR, "adb", &adb_fops)) {
pr_err("adb: unable to get major %d\n", ADB_MAJOR);
return;
}
adb_dev_class = class_create(THIS_MODULE, "adb");
if (IS_ERR(adb_dev_class))
return;
device_create(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), NULL, "adb");
platform_device_register(&adb_pfdev);
platform_driver_probe(&adb_pfdrv, adb_dummy_probe);
}