linux/fs/btrfs/dev-replace.c

1289 lines
38 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) STRATO AG 2012. All rights reserved.
*/
#include <linux/sched.h>
#include <linux/bio.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/math64.h>
#include "misc.h"
#include "ctree.h"
#include "extent_map.h"
#include "disk-io.h"
#include "transaction.h"
#include "print-tree.h"
#include "volumes.h"
#include "async-thread.h"
#include "dev-replace.h"
#include "sysfs.h"
#include "zoned.h"
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
#include "block-group.h"
#include "fs.h"
#include "accessors.h"
#include "scrub.h"
/*
* Device replace overview
*
* [Objective]
* To copy all extents (both new and on-disk) from source device to target
* device, while still keeping the filesystem read-write.
*
* [Method]
* There are two main methods involved:
*
* - Write duplication
*
* All new writes will be written to both target and source devices, so even
* if replace gets canceled, sources device still contains up-to-date data.
*
* Location: handle_ops_on_dev_replace() from btrfs_map_block()
* Start: btrfs_dev_replace_start()
* End: btrfs_dev_replace_finishing()
* Content: Latest data/metadata
*
* - Copy existing extents
*
* This happens by re-using scrub facility, as scrub also iterates through
* existing extents from commit root.
*
* Location: scrub_write_block_to_dev_replace() from
* scrub_block_complete()
* Content: Data/meta from commit root.
*
* Due to the content difference, we need to avoid nocow write when dev-replace
* is happening. This is done by marking the block group read-only and waiting
* for NOCOW writes.
*
* After replace is done, the finishing part is done by swapping the target and
* source devices.
*
* Location: btrfs_dev_replace_update_device_in_mapping_tree() from
* btrfs_dev_replace_finishing()
*/
static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info,
int scrub_ret);
static int btrfs_dev_replace_kthread(void *data);
int btrfs_init_dev_replace(struct btrfs_fs_info *fs_info)
{
struct btrfs_dev_lookup_args args = { .devid = BTRFS_DEV_REPLACE_DEVID };
struct btrfs_key key;
struct btrfs_root *dev_root = fs_info->dev_root;
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
struct extent_buffer *eb;
int slot;
int ret = 0;
struct btrfs_path *path = NULL;
int item_size;
struct btrfs_dev_replace_item *ptr;
u64 src_devid;
if (!dev_root)
return 0;
path = btrfs_alloc_path();
if (!path) {
ret = -ENOMEM;
goto out;
}
key.objectid = 0;
key.type = BTRFS_DEV_REPLACE_KEY;
key.offset = 0;
ret = btrfs_search_slot(NULL, dev_root, &key, path, 0, 0);
if (ret) {
no_valid_dev_replace_entry_found:
btrfs: dev-replace: fail mount if we don't have replace item with target device If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace item, then it means the filesystem is inconsistent state. This is either corruption or a crafted image. Fail the mount as this needs a closer look what is actually wrong. As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace item, in __btrfs_free_extra_devids() we determine that there is an extra device, and free those extra devices but continue to mount the device. However, we were wrong in keeping tack of the rw_devices so the syzbot testcase failed: WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 panic+0x347/0x7c0 kernel/panic.c:231 __warn.cold+0x20/0x46 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 RSP: 0018:ffffc900091777e0 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000 RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007 RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130 R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434 btrfs_fill_super fs/btrfs/super.c:1316 [inline] btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672 The fix here is, when we determine that there isn't a replace item then fail the mount if there is a replace target device (devid 0). CC: stable@vger.kernel.org # 4.19+ Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-29 22:53:56 +00:00
/*
* We don't have a replace item or it's corrupted. If there is
* a replace target, fail the mount.
*/
if (btrfs_find_device(fs_info->fs_devices, &args)) {
btrfs: dev-replace: fail mount if we don't have replace item with target device If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace item, then it means the filesystem is inconsistent state. This is either corruption or a crafted image. Fail the mount as this needs a closer look what is actually wrong. As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace item, in __btrfs_free_extra_devids() we determine that there is an extra device, and free those extra devices but continue to mount the device. However, we were wrong in keeping tack of the rw_devices so the syzbot testcase failed: WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 panic+0x347/0x7c0 kernel/panic.c:231 __warn.cold+0x20/0x46 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 RSP: 0018:ffffc900091777e0 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000 RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007 RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130 R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434 btrfs_fill_super fs/btrfs/super.c:1316 [inline] btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672 The fix here is, when we determine that there isn't a replace item then fail the mount if there is a replace target device (devid 0). CC: stable@vger.kernel.org # 4.19+ Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-29 22:53:56 +00:00
btrfs_err(fs_info,
"found replace target device without a valid replace item");
ret = -EUCLEAN;
goto out;
}
ret = 0;
dev_replace->replace_state =
BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED;
dev_replace->cont_reading_from_srcdev_mode =
BTRFS_DEV_REPLACE_ITEM_CONT_READING_FROM_SRCDEV_MODE_ALWAYS;
dev_replace->time_started = 0;
dev_replace->time_stopped = 0;
atomic64_set(&dev_replace->num_write_errors, 0);
atomic64_set(&dev_replace->num_uncorrectable_read_errors, 0);
dev_replace->cursor_left = 0;
dev_replace->committed_cursor_left = 0;
dev_replace->cursor_left_last_write_of_item = 0;
dev_replace->cursor_right = 0;
dev_replace->srcdev = NULL;
dev_replace->tgtdev = NULL;
dev_replace->is_valid = 0;
dev_replace->item_needs_writeback = 0;
goto out;
}
slot = path->slots[0];
eb = path->nodes[0];
item_size = btrfs_item_size(eb, slot);
ptr = btrfs_item_ptr(eb, slot, struct btrfs_dev_replace_item);
if (item_size != sizeof(struct btrfs_dev_replace_item)) {
btrfs_warn(fs_info,
"dev_replace entry found has unexpected size, ignore entry");
goto no_valid_dev_replace_entry_found;
}
src_devid = btrfs_dev_replace_src_devid(eb, ptr);
dev_replace->cont_reading_from_srcdev_mode =
btrfs_dev_replace_cont_reading_from_srcdev_mode(eb, ptr);
dev_replace->replace_state = btrfs_dev_replace_replace_state(eb, ptr);
dev_replace->time_started = btrfs_dev_replace_time_started(eb, ptr);
dev_replace->time_stopped =
btrfs_dev_replace_time_stopped(eb, ptr);
atomic64_set(&dev_replace->num_write_errors,
btrfs_dev_replace_num_write_errors(eb, ptr));
atomic64_set(&dev_replace->num_uncorrectable_read_errors,
btrfs_dev_replace_num_uncorrectable_read_errors(eb, ptr));
dev_replace->cursor_left = btrfs_dev_replace_cursor_left(eb, ptr);
dev_replace->committed_cursor_left = dev_replace->cursor_left;
dev_replace->cursor_left_last_write_of_item = dev_replace->cursor_left;
dev_replace->cursor_right = btrfs_dev_replace_cursor_right(eb, ptr);
dev_replace->is_valid = 1;
dev_replace->item_needs_writeback = 0;
switch (dev_replace->replace_state) {
case BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED:
btrfs: dev-replace: fail mount if we don't have replace item with target device If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace item, then it means the filesystem is inconsistent state. This is either corruption or a crafted image. Fail the mount as this needs a closer look what is actually wrong. As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace item, in __btrfs_free_extra_devids() we determine that there is an extra device, and free those extra devices but continue to mount the device. However, we were wrong in keeping tack of the rw_devices so the syzbot testcase failed: WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 panic+0x347/0x7c0 kernel/panic.c:231 __warn.cold+0x20/0x46 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 RSP: 0018:ffffc900091777e0 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000 RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007 RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130 R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434 btrfs_fill_super fs/btrfs/super.c:1316 [inline] btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672 The fix here is, when we determine that there isn't a replace item then fail the mount if there is a replace target device (devid 0). CC: stable@vger.kernel.org # 4.19+ Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-29 22:53:56 +00:00
/*
* We don't have an active replace item but if there is a
* replace target, fail the mount.
*/
if (btrfs_find_device(fs_info->fs_devices, &args)) {
btrfs: dev-replace: fail mount if we don't have replace item with target device If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace item, then it means the filesystem is inconsistent state. This is either corruption or a crafted image. Fail the mount as this needs a closer look what is actually wrong. As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace item, in __btrfs_free_extra_devids() we determine that there is an extra device, and free those extra devices but continue to mount the device. However, we were wrong in keeping tack of the rw_devices so the syzbot testcase failed: WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 panic+0x347/0x7c0 kernel/panic.c:231 __warn.cold+0x20/0x46 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 RSP: 0018:ffffc900091777e0 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000 RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007 RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130 R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434 btrfs_fill_super fs/btrfs/super.c:1316 [inline] btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672 The fix here is, when we determine that there isn't a replace item then fail the mount if there is a replace target device (devid 0). CC: stable@vger.kernel.org # 4.19+ Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-29 22:53:56 +00:00
btrfs_err(fs_info,
"replace without active item, run 'device scan --forget' on the target device");
btrfs: dev-replace: fail mount if we don't have replace item with target device If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace item, then it means the filesystem is inconsistent state. This is either corruption or a crafted image. Fail the mount as this needs a closer look what is actually wrong. As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace item, in __btrfs_free_extra_devids() we determine that there is an extra device, and free those extra devices but continue to mount the device. However, we were wrong in keeping tack of the rw_devices so the syzbot testcase failed: WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 panic+0x347/0x7c0 kernel/panic.c:231 __warn.cold+0x20/0x46 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 RSP: 0018:ffffc900091777e0 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000 RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007 RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130 R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434 btrfs_fill_super fs/btrfs/super.c:1316 [inline] btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672 The fix here is, when we determine that there isn't a replace item then fail the mount if there is a replace target device (devid 0). CC: stable@vger.kernel.org # 4.19+ Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-29 22:53:56 +00:00
ret = -EUCLEAN;
} else {
dev_replace->srcdev = NULL;
dev_replace->tgtdev = NULL;
}
break;
case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED:
dev_replace->tgtdev = btrfs_find_device(fs_info->fs_devices, &args);
args.devid = src_devid;
dev_replace->srcdev = btrfs_find_device(fs_info->fs_devices, &args);
/*
* allow 'btrfs dev replace_cancel' if src/tgt device is
* missing
*/
if (!dev_replace->srcdev &&
!btrfs_test_opt(fs_info, DEGRADED)) {
ret = -EIO;
btrfs_warn(fs_info,
"cannot mount because device replace operation is ongoing and");
btrfs_warn(fs_info,
"srcdev (devid %llu) is missing, need to run 'btrfs dev scan'?",
src_devid);
}
if (!dev_replace->tgtdev &&
!btrfs_test_opt(fs_info, DEGRADED)) {
ret = -EIO;
btrfs_warn(fs_info,
"cannot mount because device replace operation is ongoing and");
btrfs_warn(fs_info,
"tgtdev (devid %llu) is missing, need to run 'btrfs dev scan'?",
BTRFS_DEV_REPLACE_DEVID);
}
if (dev_replace->tgtdev) {
if (dev_replace->srcdev) {
dev_replace->tgtdev->total_bytes =
dev_replace->srcdev->total_bytes;
dev_replace->tgtdev->disk_total_bytes =
dev_replace->srcdev->disk_total_bytes;
dev_replace->tgtdev->commit_total_bytes =
dev_replace->srcdev->commit_total_bytes;
dev_replace->tgtdev->bytes_used =
dev_replace->srcdev->bytes_used;
dev_replace->tgtdev->commit_bytes_used =
dev_replace->srcdev->commit_bytes_used;
}
set_bit(BTRFS_DEV_STATE_REPLACE_TGT,
&dev_replace->tgtdev->dev_state);
WARN_ON(fs_info->fs_devices->rw_devices == 0);
dev_replace->tgtdev->io_width = fs_info->sectorsize;
dev_replace->tgtdev->io_align = fs_info->sectorsize;
dev_replace->tgtdev->sector_size = fs_info->sectorsize;
dev_replace->tgtdev->fs_info = fs_info;
set_bit(BTRFS_DEV_STATE_IN_FS_METADATA,
&dev_replace->tgtdev->dev_state);
}
break;
}
out:
btrfs_free_path(path);
return ret;
}
/*
* Initialize a new device for device replace target from a given source dev
* and path.
*
* Return 0 and new device in @device_out, otherwise return < 0
*/
static int btrfs_init_dev_replace_tgtdev(struct btrfs_fs_info *fs_info,
const char *device_path,
struct btrfs_device *srcdev,
struct btrfs_device **device_out)
{
struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
struct btrfs_device *device;
struct bdev_handle *bdev_handle;
struct block_device *bdev;
u64 devid = BTRFS_DEV_REPLACE_DEVID;
int ret = 0;
*device_out = NULL;
btrfs: fix replace of seed device If you replace a seed device in a sprouted fs, it appears to have successfully replaced the seed device, but if you look closely, it didn't. Here is an example. $ mkfs.btrfs /dev/sda $ btrfstune -S1 /dev/sda $ mount /dev/sda /btrfs $ btrfs device add /dev/sdb /btrfs $ umount /btrfs $ btrfs device scan --forget $ mount -o device=/dev/sda /dev/sdb /btrfs $ btrfs replace start -f /dev/sda /dev/sdc /btrfs $ echo $? 0 BTRFS info (device sdb): dev_replace from /dev/sda (devid 1) to /dev/sdc started BTRFS info (device sdb): dev_replace from /dev/sda (devid 1) to /dev/sdc finished $ btrfs fi show Label: none uuid: ab2c88b7-be81-4a7e-9849-c3666e7f9f4f Total devices 2 FS bytes used 256.00KiB devid 1 size 3.00GiB used 520.00MiB path /dev/sdc devid 2 size 3.00GiB used 896.00MiB path /dev/sdb Label: none uuid: 10bd3202-0415-43af-96a8-d5409f310a7e Total devices 1 FS bytes used 128.00KiB devid 1 size 3.00GiB used 536.00MiB path /dev/sda So as per the replace start command and kernel log replace was successful. Now let's try to clean mount. $ umount /btrfs $ btrfs device scan --forget $ mount -o device=/dev/sdc /dev/sdb /btrfs mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error. [ 636.157517] BTRFS error (device sdc): failed to read chunk tree: -2 [ 636.180177] BTRFS error (device sdc): open_ctree failed That's because per dev items it is still looking for the original seed device. $ btrfs inspect-internal dump-tree -d /dev/sdb item 0 key (DEV_ITEMS DEV_ITEM 1) itemoff 16185 itemsize 98 devid 1 total_bytes 3221225472 bytes_used 545259520 io_align 4096 io_width 4096 sector_size 4096 type 0 generation 6 start_offset 0 dev_group 0 seek_speed 0 bandwidth 0 uuid 59368f50-9af2-4b17-91da-8a783cc418d4 <--- seed uuid fsid 10bd3202-0415-43af-96a8-d5409f310a7e <--- seed fsid item 1 key (DEV_ITEMS DEV_ITEM 2) itemoff 16087 itemsize 98 devid 2 total_bytes 3221225472 bytes_used 939524096 io_align 4096 io_width 4096 sector_size 4096 type 0 generation 0 start_offset 0 dev_group 0 seek_speed 0 bandwidth 0 uuid 56a0a6bc-4630-4998-8daf-3c3030c4256a <- sprout uuid fsid ab2c88b7-be81-4a7e-9849-c3666e7f9f4f <- sprout fsid But the replaced target has the following uuid+fsid in its superblock which doesn't match with the expected uuid+fsid in its devitem. $ btrfs in dump-super /dev/sdc | egrep '^generation|dev_item.uuid|dev_item.fsid|devid' generation 20 dev_item.uuid 59368f50-9af2-4b17-91da-8a783cc418d4 dev_item.fsid ab2c88b7-be81-4a7e-9849-c3666e7f9f4f [match] dev_item.devid 1 So if you provide the original seed device the mount shall be successful. Which so long happening in the test case btrfs/163. $ btrfs device scan --forget $ mount -o device=/dev/sda /dev/sdb /btrfs Fix in this patch: If a seed is not sprouted then there is no replacement of it, because of its read-only filesystem with a read-only device. Similarly, in the case of a sprouted filesystem, the seed device is still read only. So, mark it as you can't replace a seed device, you can only add a new device and then delete the seed device. If replace is attempted then returns -EINVAL. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-04 17:34:22 +00:00
if (srcdev->fs_devices->seeding) {
btrfs_err(fs_info, "the filesystem is a seed filesystem!");
return -EINVAL;
}
bdev_handle = bdev_open_by_path(device_path, BLK_OPEN_WRITE,
fs_info->bdev_holder, NULL);
if (IS_ERR(bdev_handle)) {
btrfs_err(fs_info, "target device %s is invalid!", device_path);
return PTR_ERR(bdev_handle);
}
bdev = bdev_handle->bdev;
if (!btrfs_check_device_zone_type(fs_info, bdev)) {
btrfs_err(fs_info,
"dev-replace: zoned type of target device mismatch with filesystem");
ret = -EINVAL;
goto error;
}
sync_blockdev(bdev);
list_for_each_entry(device, &fs_devices->devices, dev_list) {
if (device->bdev == bdev) {
btrfs_err(fs_info,
"target device is in the filesystem!");
ret = -EEXIST;
goto error;
}
}
if (bdev_nr_bytes(bdev) < btrfs_device_get_total_bytes(srcdev)) {
btrfs_err(fs_info,
"target device is smaller than source device!");
ret = -EINVAL;
goto error;
}
device = btrfs_alloc_device(NULL, &devid, NULL, device_path);
if (IS_ERR(device)) {
ret = PTR_ERR(device);
goto error;
}
ret = lookup_bdev(device_path, &device->devt);
if (ret)
goto error;
set_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state);
device->generation = 0;
device->io_width = fs_info->sectorsize;
device->io_align = fs_info->sectorsize;
device->sector_size = fs_info->sectorsize;
device->total_bytes = btrfs_device_get_total_bytes(srcdev);
device->disk_total_bytes = btrfs_device_get_disk_total_bytes(srcdev);
device->bytes_used = btrfs_device_get_bytes_used(srcdev);
device->commit_total_bytes = srcdev->commit_total_bytes;
device->commit_bytes_used = device->bytes_used;
device->fs_info = fs_info;
device->bdev = bdev;
device->bdev_handle = bdev_handle;
set_bit(BTRFS_DEV_STATE_IN_FS_METADATA, &device->dev_state);
set_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state);
device->dev_stats_valid = 1;
set_blocksize(device->bdev, BTRFS_BDEV_BLOCKSIZE);
device->fs_devices = fs_devices;
ret = btrfs_get_dev_zone_info(device, false);
if (ret)
goto error;
mutex_lock(&fs_devices->device_list_mutex);
list_add(&device->dev_list, &fs_devices->devices);
fs_devices->num_devices++;
fs_devices->open_devices++;
mutex_unlock(&fs_devices->device_list_mutex);
*device_out = device;
return 0;
error:
bdev_release(bdev_handle);
return ret;
}
/*
* called from commit_transaction. Writes changed device replace state to
* disk.
*/
int btrfs_run_dev_replace(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
int ret;
struct btrfs_root *dev_root = fs_info->dev_root;
struct btrfs_path *path;
struct btrfs_key key;
struct extent_buffer *eb;
struct btrfs_dev_replace_item *ptr;
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
down_read(&dev_replace->rwsem);
if (!dev_replace->is_valid ||
!dev_replace->item_needs_writeback) {
up_read(&dev_replace->rwsem);
return 0;
}
up_read(&dev_replace->rwsem);
key.objectid = 0;
key.type = BTRFS_DEV_REPLACE_KEY;
key.offset = 0;
path = btrfs_alloc_path();
if (!path) {
ret = -ENOMEM;
goto out;
}
ret = btrfs_search_slot(trans, dev_root, &key, path, -1, 1);
if (ret < 0) {
btrfs_warn(fs_info,
"error %d while searching for dev_replace item!",
ret);
goto out;
}
if (ret == 0 &&
btrfs_item_size(path->nodes[0], path->slots[0]) < sizeof(*ptr)) {
/*
* need to delete old one and insert a new one.
* Since no attempt is made to recover any old state, if the
* dev_replace state is 'running', the data on the target
* drive is lost.
* It would be possible to recover the state: just make sure
* that the beginning of the item is never changed and always
* contains all the essential information. Then read this
* minimal set of information and use it as a base for the
* new state.
*/
ret = btrfs_del_item(trans, dev_root, path);
if (ret != 0) {
btrfs_warn(fs_info,
"delete too small dev_replace item failed %d!",
ret);
goto out;
}
ret = 1;
}
if (ret == 1) {
/* need to insert a new item */
btrfs_release_path(path);
ret = btrfs_insert_empty_item(trans, dev_root, path,
&key, sizeof(*ptr));
if (ret < 0) {
btrfs_warn(fs_info,
"insert dev_replace item failed %d!", ret);
goto out;
}
}
eb = path->nodes[0];
ptr = btrfs_item_ptr(eb, path->slots[0],
struct btrfs_dev_replace_item);
down_write(&dev_replace->rwsem);
if (dev_replace->srcdev)
btrfs_set_dev_replace_src_devid(eb, ptr,
dev_replace->srcdev->devid);
else
btrfs_set_dev_replace_src_devid(eb, ptr, (u64)-1);
btrfs_set_dev_replace_cont_reading_from_srcdev_mode(eb, ptr,
dev_replace->cont_reading_from_srcdev_mode);
btrfs_set_dev_replace_replace_state(eb, ptr,
dev_replace->replace_state);
btrfs_set_dev_replace_time_started(eb, ptr, dev_replace->time_started);
btrfs_set_dev_replace_time_stopped(eb, ptr, dev_replace->time_stopped);
btrfs_set_dev_replace_num_write_errors(eb, ptr,
atomic64_read(&dev_replace->num_write_errors));
btrfs_set_dev_replace_num_uncorrectable_read_errors(eb, ptr,
atomic64_read(&dev_replace->num_uncorrectable_read_errors));
dev_replace->cursor_left_last_write_of_item =
dev_replace->cursor_left;
btrfs_set_dev_replace_cursor_left(eb, ptr,
dev_replace->cursor_left_last_write_of_item);
btrfs_set_dev_replace_cursor_right(eb, ptr,
dev_replace->cursor_right);
dev_replace->item_needs_writeback = 0;
up_write(&dev_replace->rwsem);
btrfs_mark_buffer_dirty(trans, eb);
out:
btrfs_free_path(path);
return ret;
}
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
static int mark_block_group_to_copy(struct btrfs_fs_info *fs_info,
struct btrfs_device *src_dev)
{
struct btrfs_path *path;
struct btrfs_key key;
struct btrfs_key found_key;
struct btrfs_root *root = fs_info->dev_root;
struct btrfs_dev_extent *dev_extent = NULL;
struct btrfs_block_group *cache;
struct btrfs_trans_handle *trans;
int iter_ret = 0;
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
int ret = 0;
u64 chunk_offset;
/* Do not use "to_copy" on non zoned filesystem for now */
if (!btrfs_is_zoned(fs_info))
return 0;
mutex_lock(&fs_info->chunk_mutex);
/* Ensure we don't have pending new block group */
spin_lock(&fs_info->trans_lock);
while (fs_info->running_transaction &&
!list_empty(&fs_info->running_transaction->dev_update_list)) {
spin_unlock(&fs_info->trans_lock);
mutex_unlock(&fs_info->chunk_mutex);
trans = btrfs_attach_transaction(root);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
mutex_lock(&fs_info->chunk_mutex);
if (ret == -ENOENT) {
spin_lock(&fs_info->trans_lock);
continue;
} else {
goto unlock;
}
}
ret = btrfs_commit_transaction(trans);
mutex_lock(&fs_info->chunk_mutex);
if (ret)
goto unlock;
spin_lock(&fs_info->trans_lock);
}
spin_unlock(&fs_info->trans_lock);
path = btrfs_alloc_path();
if (!path) {
ret = -ENOMEM;
goto unlock;
}
path->reada = READA_FORWARD;
path->search_commit_root = 1;
path->skip_locking = 1;
key.objectid = src_dev->devid;
key.type = BTRFS_DEV_EXTENT_KEY;
key.offset = 0;
btrfs_for_each_slot(root, &key, &found_key, path, iter_ret) {
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
struct extent_buffer *leaf = path->nodes[0];
if (found_key.objectid != src_dev->devid)
break;
if (found_key.type != BTRFS_DEV_EXTENT_KEY)
break;
if (found_key.offset < key.offset)
break;
dev_extent = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_dev_extent);
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
chunk_offset = btrfs_dev_extent_chunk_offset(leaf, dev_extent);
cache = btrfs_lookup_block_group(fs_info, chunk_offset);
if (!cache)
continue;
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
set_bit(BLOCK_GROUP_FLAG_TO_COPY, &cache->runtime_flags);
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
btrfs_put_block_group(cache);
}
if (iter_ret < 0)
ret = iter_ret;
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
btrfs_free_path(path);
unlock:
mutex_unlock(&fs_info->chunk_mutex);
return ret;
}
bool btrfs_finish_block_group_to_copy(struct btrfs_device *srcdev,
struct btrfs_block_group *cache,
u64 physical)
{
struct btrfs_fs_info *fs_info = cache->fs_info;
btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-11-21 13:38:38 +00:00
struct btrfs_chunk_map *map;
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
u64 chunk_offset = cache->start;
int num_extents, cur_extent;
int i;
/* Do not use "to_copy" on non zoned filesystem for now */
if (!btrfs_is_zoned(fs_info))
return true;
spin_lock(&cache->lock);
if (test_bit(BLOCK_GROUP_FLAG_REMOVED, &cache->runtime_flags)) {
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
spin_unlock(&cache->lock);
return true;
}
spin_unlock(&cache->lock);
btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-11-21 13:38:38 +00:00
map = btrfs_get_chunk_map(fs_info, chunk_offset, 1);
ASSERT(!IS_ERR(map));
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
num_extents = 0;
cur_extent = 0;
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
for (i = 0; i < map->num_stripes; i++) {
/* We have more device extent to copy */
if (srcdev != map->stripes[i].dev)
continue;
num_extents++;
if (physical == map->stripes[i].physical)
cur_extent = i;
}
btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-11-21 13:38:38 +00:00
btrfs_free_chunk_map(map);
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
if (num_extents > 1 && cur_extent < num_extents - 1) {
/*
* Has more stripes on this device. Keep this block group
* readonly until we finish all the stripes.
*/
return false;
}
/* Last stripe on this device */
clear_bit(BLOCK_GROUP_FLAG_TO_COPY, &cache->runtime_flags);
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
return true;
}
static int btrfs_dev_replace_start(struct btrfs_fs_info *fs_info,
const char *tgtdev_name, u64 srcdevid, const char *srcdev_name,
int read_src)
{
struct btrfs_root *root = fs_info->dev_root;
struct btrfs_trans_handle *trans;
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
int ret;
struct btrfs_device *tgt_device = NULL;
struct btrfs_device *src_device = NULL;
src_device = btrfs_find_device_by_devspec(fs_info, srcdevid,
srcdev_name);
if (IS_ERR(src_device))
return PTR_ERR(src_device);
if (btrfs_pinned_by_swapfile(fs_info, src_device)) {
btrfs_warn_in_rcu(fs_info,
"cannot replace device %s (devid %llu) due to active swapfile",
btrfs_dev_name(src_device), src_device->devid);
return -ETXTBSY;
}
/*
* Here we commit the transaction to make sure commit_total_bytes
* of all the devices are updated.
*/
trans = btrfs_attach_transaction(root);
if (!IS_ERR(trans)) {
ret = btrfs_commit_transaction(trans);
if (ret)
return ret;
} else if (PTR_ERR(trans) != -ENOENT) {
return PTR_ERR(trans);
}
ret = btrfs_init_dev_replace_tgtdev(fs_info, tgtdev_name,
src_device, &tgt_device);
if (ret)
return ret;
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
ret = mark_block_group_to_copy(fs_info, src_device);
if (ret)
return ret;
down_write(&dev_replace->rwsem);
switch (dev_replace->replace_state) {
case BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED:
break;
case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED:
ASSERT(0);
ret = BTRFS_IOCTL_DEV_REPLACE_RESULT_ALREADY_STARTED;
up_write(&dev_replace->rwsem);
goto leave;
}
dev_replace->cont_reading_from_srcdev_mode = read_src;
dev_replace->srcdev = src_device;
dev_replace->tgtdev = tgt_device;
btrfs_info_in_rcu(fs_info,
"dev_replace from %s (devid %llu) to %s started",
btrfs_dev_name(src_device),
src_device->devid,
btrfs_dev_name(tgt_device));
/*
* from now on, the writes to the srcdev are all duplicated to
* go to the tgtdev as well (refer to btrfs_map_block()).
*/
dev_replace->replace_state = BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED;
dev_replace->time_started = ktime_get_real_seconds();
dev_replace->cursor_left = 0;
dev_replace->committed_cursor_left = 0;
dev_replace->cursor_left_last_write_of_item = 0;
dev_replace->cursor_right = 0;
dev_replace->is_valid = 1;
dev_replace->item_needs_writeback = 1;
atomic64_set(&dev_replace->num_write_errors, 0);
atomic64_set(&dev_replace->num_uncorrectable_read_errors, 0);
up_write(&dev_replace->rwsem);
ret = btrfs_sysfs_add_device(tgt_device);
if (ret)
btrfs_err(fs_info, "kobj add dev failed %d", ret);
btrfs_wait_ordered_roots(fs_info, U64_MAX, 0, (u64)-1);
btrfs: fix assertion failure during scrub due to block group reallocation During a scrub, or device replace, we can race with block group removal and allocation and trigger the following assertion failure: [7526.385524] assertion failed: cache->start == chunk_offset, in fs/btrfs/scrub.c:3817 [7526.387351] ------------[ cut here ]------------ [7526.387373] kernel BUG at fs/btrfs/ctree.h:3599! [7526.388001] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [7526.388970] CPU: 2 PID: 1158150 Comm: btrfs Not tainted 5.17.0-rc8-btrfs-next-114 #4 [7526.390279] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [7526.392430] RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs] [7526.393520] Code: f3 48 c7 c7 20 (...) [7526.396926] RSP: 0018:ffffb9154176bc40 EFLAGS: 00010246 [7526.397690] RAX: 0000000000000048 RBX: ffffa0db8a910000 RCX: 0000000000000000 [7526.398732] RDX: 0000000000000000 RSI: ffffffff9d7239a2 RDI: 00000000ffffffff [7526.399766] RBP: ffffa0db8a911e10 R08: ffffffffa71a3ca0 R09: 0000000000000001 [7526.400793] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa0db4b170800 [7526.401839] R13: 00000003494b0000 R14: ffffa0db7c55b488 R15: ffffa0db8b19a000 [7526.402874] FS: 00007f6c99c40640(0000) GS:ffffa0de6d200000(0000) knlGS:0000000000000000 [7526.404038] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7526.405040] CR2: 00007f31b0882160 CR3: 000000014b38c004 CR4: 0000000000370ee0 [7526.406112] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7526.407148] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7526.408169] Call Trace: [7526.408529] <TASK> [7526.408839] scrub_enumerate_chunks.cold+0x11/0x79 [btrfs] [7526.409690] ? do_wait_intr_irq+0xb0/0xb0 [7526.410276] btrfs_scrub_dev+0x226/0x620 [btrfs] [7526.410995] ? preempt_count_add+0x49/0xa0 [7526.411592] btrfs_ioctl+0x1ab5/0x36d0 [btrfs] [7526.412278] ? __fget_files+0xc9/0x1b0 [7526.412825] ? kvm_sched_clock_read+0x14/0x40 [7526.413459] ? lock_release+0x155/0x4a0 [7526.414022] ? __x64_sys_ioctl+0x83/0xb0 [7526.414601] __x64_sys_ioctl+0x83/0xb0 [7526.415150] do_syscall_64+0x3b/0xc0 [7526.415675] entry_SYSCALL_64_after_hwframe+0x44/0xae [7526.416408] RIP: 0033:0x7f6c99d34397 [7526.416931] Code: 3c 1c e8 1c ff (...) [7526.419641] RSP: 002b:00007f6c99c3fca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [7526.420735] RAX: ffffffffffffffda RBX: 00005624e1e007b0 RCX: 00007f6c99d34397 [7526.421779] RDX: 00005624e1e007b0 RSI: 00000000c400941b RDI: 0000000000000003 [7526.422820] RBP: 0000000000000000 R08: 00007f6c99c40640 R09: 0000000000000000 [7526.423906] R10: 00007f6c99c40640 R11: 0000000000000246 R12: 00007fff746755de [7526.424924] R13: 00007fff746755df R14: 0000000000000000 R15: 00007f6c99c40640 [7526.425950] </TASK> That assertion is relatively new, introduced with commit d04fbe19aefd2 ("btrfs: scrub: cleanup the argument list of scrub_chunk()"). The block group we get at scrub_enumerate_chunks() can actually have a start address that is smaller then the chunk offset we extracted from a device extent item we got from the commit root of the device tree. This is very rare, but it can happen due to a race with block group removal and allocation. For example, the following steps show how this can happen: 1) We are at transaction T, and we have the following blocks groups, sorted by their logical start address: [ bg A, start address A, length 1G (data) ] [ bg B, start address B, length 1G (data) ] (...) [ bg W, start address W, length 1G (data) ] --> logical address space hole of 256M, there used to be a 256M metadata block group here [ bg Y, start address Y, length 256M (metadata) ] --> Y matches W's end offset + 256M Block group Y is the block group with the highest logical address in the whole filesystem; 2) Block group Y is deleted and its extent mapping is removed by the call to remove_extent_mapping() made from btrfs_remove_block_group(). So after this point, the last element of the mapping red black tree, its rightmost node, is the mapping for block group W; 3) While still at transaction T, a new data block group is allocated, with a length of 1G. When creating the block group we do a call to find_next_chunk(), which returns the logical start address for the new block group. This calls returns X, which corresponds to the end offset of the last block group, the rightmost node in the mapping red black tree (fs_info->mapping_tree), plus one. So we get a new block group that starts at logical address X and with a length of 1G. It spans over the whole logical range of the old block group Y, that was previously removed in the same transaction. However the device extent allocated to block group X is not the same device extent that was used by block group Y, and it also does not overlap that extent, which must be always the case because we allocate extents by searching through the commit root of the device tree (otherwise it could corrupt a filesystem after a power failure or an unclean shutdown in general), so the extent allocator is behaving as expected; 4) We have a task running scrub, currently at scrub_enumerate_chunks(). There it searches for device extent items in the device tree, using its commit root. It finds a device extent item that was used by block group Y, and it extracts the value Y from that item into the local variable 'chunk_offset', using btrfs_dev_extent_chunk_offset(); It then calls btrfs_lookup_block_group() to find block group for the logical address Y - since there's currently no block group that starts at that logical address, it returns block group X, because its range contains Y. This results in triggering the assertion: ASSERT(cache->start == chunk_offset); right before calling scrub_chunk(), as cache->start is X and chunk_offset is Y. This is more likely to happen of filesystems not larger than 50G, because for these filesystems we use a 256M size for metadata block groups and a 1G size for data block groups, while for filesystems larger than 50G, we use a 1G size for both data and metadata block groups (except for zoned filesystems). It could also happen on any filesystem size due to the fact that system block groups are always smaller (32M) than both data and metadata block groups, but these are not frequently deleted, so much less likely to trigger the race. So make scrub skip any block group with a start offset that is less than the value we expect, as that means it's a new block group that was created in the current transaction. It's pointless to continue and try to scrub its extents, because scrub searches for extents using the commit root, so it won't find any. For a device replace, skip it as well for the same reasons, and we don't need to worry about the possibility of extents of the new block group not being to the new device, because we have the write duplication setup done through btrfs_map_block(). Fixes: d04fbe19aefd ("btrfs: scrub: cleanup the argument list of scrub_chunk()") CC: stable@vger.kernel.org # 5.17 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-19 13:23:57 +00:00
/*
* Commit dev_replace state and reserve 1 item for it.
* This is crucial to ensure we won't miss copying extents for new block
* groups that are allocated after we started the device replace, and
* must be done after setting up the device replace state.
*/
trans = btrfs_start_transaction(root, 1);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
down_write(&dev_replace->rwsem);
dev_replace->replace_state =
BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED;
dev_replace->srcdev = NULL;
dev_replace->tgtdev = NULL;
up_write(&dev_replace->rwsem);
goto leave;
}
ret = btrfs_commit_transaction(trans);
WARN_ON(ret);
/* the disk copy procedure reuses the scrub code */
ret = btrfs_scrub_dev(fs_info, src_device->devid, 0,
btrfs_device_get_total_bytes(src_device),
&dev_replace->scrub_progress, 0, 1);
ret = btrfs_dev_replace_finishing(fs_info, ret);
btrfs: dev-replace: remove warning for unknown return codes when finished The fstests btrfs/011 triggered a warning at the end of device replace, [ 1891.998975] BTRFS warning (device vdd): failed setting block group ro: -28 [ 1892.038338] BTRFS error (device vdd): btrfs_scrub_dev(/dev/vdd, 1, /dev/vdb) failed -28 [ 1892.059993] ------------[ cut here ]------------ [ 1892.063032] WARNING: CPU: 2 PID: 2244 at fs/btrfs/dev-replace.c:506 btrfs_dev_replace_start.cold+0xf9/0x140 [btrfs] [ 1892.074346] CPU: 2 PID: 2244 Comm: btrfs Not tainted 5.5.0-rc7-default+ #942 [ 1892.079956] RIP: 0010:btrfs_dev_replace_start.cold+0xf9/0x140 [btrfs] [ 1892.096576] RSP: 0018:ffffbb58c7b3fd10 EFLAGS: 00010286 [ 1892.098311] RAX: 00000000ffffffe4 RBX: 0000000000000001 RCX: 8888888888888889 [ 1892.100342] RDX: 0000000000000001 RSI: ffff9e889645f5d8 RDI: ffffffff92821080 [ 1892.102291] RBP: ffff9e889645c000 R08: 000001b8878fe1f6 R09: 0000000000000000 [ 1892.104239] R10: ffffbb58c7b3fd08 R11: 0000000000000000 R12: ffff9e88a0017000 [ 1892.106434] R13: ffff9e889645f608 R14: ffff9e88794e1000 R15: ffff9e88a07b5200 [ 1892.108642] FS: 00007fcaed3f18c0(0000) GS:ffff9e88bda00000(0000) knlGS:0000000000000000 [ 1892.111558] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1892.113492] CR2: 00007f52509ff420 CR3: 00000000603dd002 CR4: 0000000000160ee0 [ 1892.115814] Call Trace: [ 1892.116896] btrfs_dev_replace_by_ioctl+0x35/0x60 [btrfs] [ 1892.118962] btrfs_ioctl+0x1d62/0x2550 [btrfs] caused by the previous patch ("btrfs: scrub: Require mandatory block group RO for dev-replace"). Hitting ENOSPC is possible and could happen when the block group is set read-only, preventing NOCOW writes to the area that's being accessed by dev-replace. This has happend with scratch devices of size 12G but not with 5G and 20G, so this is depends on timing and other activity on the filesystem. The whole replace operation is restartable, the space state should be examined by the user in any case. The error code is propagated back to the ioctl caller so the kernel warning is causing false alerts. Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-25 11:35:38 +00:00
if (ret == -EINPROGRESS)
ret = BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS;
return ret;
leave:
btrfs_destroy_dev_replace_tgtdev(tgt_device);
return ret;
}
int btrfs_dev_replace_by_ioctl(struct btrfs_fs_info *fs_info,
struct btrfs_ioctl_dev_replace_args *args)
{
int ret;
switch (args->start.cont_reading_from_srcdev_mode) {
case BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_ALWAYS:
case BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_AVOID:
break;
default:
return -EINVAL;
}
if ((args->start.srcdevid == 0 && args->start.srcdev_name[0] == '\0') ||
args->start.tgtdev_name[0] == '\0')
return -EINVAL;
ret = btrfs_dev_replace_start(fs_info, args->start.tgtdev_name,
args->start.srcdevid,
args->start.srcdev_name,
args->start.cont_reading_from_srcdev_mode);
args->result = ret;
/* don't warn if EINPROGRESS, someone else might be running scrub */
if (ret == BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS ||
ret == BTRFS_IOCTL_DEV_REPLACE_RESULT_NO_ERROR)
return 0;
return ret;
}
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
/*
* blocked until all in-flight bios operations are finished.
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
*/
static void btrfs_rm_dev_replace_blocked(struct btrfs_fs_info *fs_info)
{
set_bit(BTRFS_FS_STATE_DEV_REPLACING, &fs_info->fs_state);
wait_event(fs_info->dev_replace.replace_wait, !percpu_counter_sum(
&fs_info->dev_replace.bio_counter));
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
}
/*
* we have removed target device, it is safe to allow new bios request.
*/
static void btrfs_rm_dev_replace_unblocked(struct btrfs_fs_info *fs_info)
{
clear_bit(BTRFS_FS_STATE_DEV_REPLACING, &fs_info->fs_state);
wake_up(&fs_info->dev_replace.replace_wait);
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
}
btrfs: fix filesystem corruption after a device replace We use a device's allocation state tree to track ranges in a device used for allocated chunks, and we set ranges in this tree when allocating a new chunk. However after a device replace operation, we were not setting the allocated ranges in the new device's allocation state tree, so that tree is empty after a device replace. This means that a fitrim operation after a device replace will trim the device ranges that have allocated chunks and extents, as we trim every range for which there is not a range marked in the device's allocation state tree. It is also important during chunk allocation, since the device's allocation state is used to determine if a range is already allocated when allocating a new chunk. This is trivial to reproduce and the following script triggers the bug: $ cat reproducer.sh #!/bin/bash DEV1="/dev/sdg" DEV2="/dev/sdh" DEV3="/dev/sdi" wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null # Create a raid1 test fs on 2 devices. mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null mount $DEV1 /mnt/btrfs xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo echo "Starting to replace $DEV1 with $DEV3" btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs echo echo "Running fstrim" fstrim /mnt/btrfs echo echo "Unmounting filesystem" umount /mnt/btrfs echo "Mounting filesystem in degraded mode using $DEV3 only" wipefs -a $DEV1 $DEV2 &> /dev/null mount -o degraded $DEV3 /mnt/btrfs if [ $? -ne 0 ]; then dmesg | tail echo echo "Failed to mount in degraded mode" exit 1 fi echo echo "File foo data (expected all bytes = 0xab):" od -A d -t x1 /mnt/btrfs/foo umount /mnt/btrfs When running the reproducer: $ ./replace-test.sh wrote 10485760/10485760 bytes at offset 0 10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec) Starting to replace /dev/sdg with /dev/sdi Running fstrim Unmounting filesystem Mounting filesystem in degraded mode using /dev/sdi only mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error. [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished [19582.208293] BTRFS info (device sdi): allowing degraded mounts [19582.208298] BTRFS info (device sdi): disk space caching is enabled [19582.208301] BTRFS info (device sdi): has skinny extents [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0 [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5 [19582.231576] BTRFS error (device sdi): open_ctree failed Failed to mount in degraded mode So fix by setting all allocated ranges in the replace target device when the replace operation is finishing, when we are holding the chunk mutex and we can not race with new chunk allocations. A test case for fstests follows soon. Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree") CC: stable@vger.kernel.org # 5.2+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-23 14:30:16 +00:00
/*
* When finishing the device replace, before swapping the source device with the
* target device we must update the chunk allocation state in the target device,
* as it is empty because replace works by directly copying the chunks and not
* through the normal chunk allocation path.
*/
static int btrfs_set_target_alloc_state(struct btrfs_device *srcdev,
struct btrfs_device *tgtdev)
{
struct extent_state *cached_state = NULL;
u64 start = 0;
u64 found_start;
u64 found_end;
int ret = 0;
lockdep_assert_held(&srcdev->fs_info->chunk_mutex);
while (find_first_extent_bit(&srcdev->alloc_state, start,
&found_start, &found_end,
CHUNK_ALLOCATED, &cached_state)) {
ret = set_extent_bit(&tgtdev->alloc_state, found_start,
found_end, CHUNK_ALLOCATED, NULL);
btrfs: fix filesystem corruption after a device replace We use a device's allocation state tree to track ranges in a device used for allocated chunks, and we set ranges in this tree when allocating a new chunk. However after a device replace operation, we were not setting the allocated ranges in the new device's allocation state tree, so that tree is empty after a device replace. This means that a fitrim operation after a device replace will trim the device ranges that have allocated chunks and extents, as we trim every range for which there is not a range marked in the device's allocation state tree. It is also important during chunk allocation, since the device's allocation state is used to determine if a range is already allocated when allocating a new chunk. This is trivial to reproduce and the following script triggers the bug: $ cat reproducer.sh #!/bin/bash DEV1="/dev/sdg" DEV2="/dev/sdh" DEV3="/dev/sdi" wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null # Create a raid1 test fs on 2 devices. mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null mount $DEV1 /mnt/btrfs xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo echo "Starting to replace $DEV1 with $DEV3" btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs echo echo "Running fstrim" fstrim /mnt/btrfs echo echo "Unmounting filesystem" umount /mnt/btrfs echo "Mounting filesystem in degraded mode using $DEV3 only" wipefs -a $DEV1 $DEV2 &> /dev/null mount -o degraded $DEV3 /mnt/btrfs if [ $? -ne 0 ]; then dmesg | tail echo echo "Failed to mount in degraded mode" exit 1 fi echo echo "File foo data (expected all bytes = 0xab):" od -A d -t x1 /mnt/btrfs/foo umount /mnt/btrfs When running the reproducer: $ ./replace-test.sh wrote 10485760/10485760 bytes at offset 0 10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec) Starting to replace /dev/sdg with /dev/sdi Running fstrim Unmounting filesystem Mounting filesystem in degraded mode using /dev/sdi only mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error. [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished [19582.208293] BTRFS info (device sdi): allowing degraded mounts [19582.208298] BTRFS info (device sdi): disk space caching is enabled [19582.208301] BTRFS info (device sdi): has skinny extents [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0 [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5 [19582.231576] BTRFS error (device sdi): open_ctree failed Failed to mount in degraded mode So fix by setting all allocated ranges in the replace target device when the replace operation is finishing, when we are holding the chunk mutex and we can not race with new chunk allocations. A test case for fstests follows soon. Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree") CC: stable@vger.kernel.org # 5.2+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-23 14:30:16 +00:00
if (ret)
break;
start = found_end + 1;
}
free_extent_state(cached_state);
return ret;
}
static void btrfs_dev_replace_update_device_in_mapping_tree(
struct btrfs_fs_info *fs_info,
struct btrfs_device *srcdev,
struct btrfs_device *tgtdev)
{
u64 start = 0;
int i;
btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-11-21 13:38:38 +00:00
write_lock(&fs_info->mapping_tree_lock);
do {
btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-11-21 13:38:38 +00:00
struct btrfs_chunk_map *map;
map = btrfs_find_chunk_map_nolock(fs_info, start, U64_MAX);
if (!map)
break;
for (i = 0; i < map->num_stripes; i++)
if (srcdev == map->stripes[i].dev)
map->stripes[i].dev = tgtdev;
btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-11-21 13:38:38 +00:00
start = map->start + map->chunk_len;
btrfs_free_chunk_map(map);
} while (start);
btrfs: use a dedicated data structure for chunk maps Currently we abuse the extent_map structure for two purposes: 1) To actually represent extents for inodes; 2) To represent chunk mappings. This is odd and has several disadvantages: 1) To create a chunk map, we need to do two memory allocations: one for an extent_map structure and another one for a map_lookup structure, so more potential for an allocation failure and more complicated code to manage and link two structures; 2) For a chunk map we actually only use 3 fields (24 bytes) of the respective extent map structure: the 'start' field to have the logical start address of the chunk, the 'len' field to have the chunk's size, and the 'orig_block_len' field to contain the chunk's stripe size. Besides wasting a memory, it's also odd and not intuitive at all to have the stripe size in a field named 'orig_block_len'. We are also using 'block_len' of the extent_map structure to contain the chunk size, so we have 2 fields for the same value, 'len' and 'block_len', which is pointless; 3) When an extent map is associated to a chunk mapping, we set the bit EXTENT_FLAG_FS_MAPPING on its flags and then make its member named 'map_lookup' point to the associated map_lookup structure. This means that for an extent map associated to an inode extent, we are not using this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform); 4) Extent maps associated to a chunk mapping are never merged or split so it's pointless to use the existing extent map infrastructure. So add a dedicated data structure named 'btrfs_chunk_map' to represent chunk mappings, this is basically the existing map_lookup structure with some extra fields: 1) 'start' to contain the chunk logical address; 2) 'chunk_len' to contain the chunk's length; 3) 'stripe_size' for the stripe size; 4) 'rb_node' for insertion into a rb tree; 5) 'refs' for reference counting. This way we do a single memory allocation for chunk mappings and we don't waste memory for them with unused/unnecessary fields from an extent_map. We also save 8 bytes from the extent_map structure by removing the 'map_lookup' pointer, so the size of struct extent_map is reduced from 144 bytes down to 136 bytes, and we can now have 30 extents map per 4K page instead of 28. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-11-21 13:38:38 +00:00
write_unlock(&fs_info->mapping_tree_lock);
}
static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info,
int scrub_ret)
{
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
struct btrfs_device *tgt_device;
struct btrfs_device *src_device;
struct btrfs_root *root = fs_info->tree_root;
u8 uuid_tmp[BTRFS_UUID_SIZE];
struct btrfs_trans_handle *trans;
int ret = 0;
/* don't allow cancel or unmount to disturb the finishing procedure */
mutex_lock(&dev_replace->lock_finishing_cancel_unmount);
down_read(&dev_replace->rwsem);
/* was the operation canceled, or is it finished? */
if (dev_replace->replace_state !=
BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED) {
up_read(&dev_replace->rwsem);
mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
return 0;
}
tgt_device = dev_replace->tgtdev;
src_device = dev_replace->srcdev;
up_read(&dev_replace->rwsem);
/*
* flush all outstanding I/O and inode extent mappings before the
* copy operation is declared as being finished
*/
ret = btrfs_start_delalloc_roots(fs_info, LONG_MAX, false);
if (ret) {
mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
return ret;
}
btrfs_wait_ordered_roots(fs_info, U64_MAX, 0, (u64)-1);
btrfs: Ensure replaced device doesn't have pending chunk allocation Recent FITRIM work, namely bbbf7243d62d ("btrfs: combine device update operations during transaction commit") combined the way certain operations are recoded in a transaction. As a result an ASSERT was added in dev_replace_finish to ensure the new code works correctly. Unfortunately I got reports that it's possible to trigger the assert, meaning that during a device replace it's possible to have an unfinished chunk allocation on the source device. This is supposed to be prevented by the fact that a transaction is committed before finishing the replace oepration and alter acquiring the chunk mutex. This is not sufficient since by the time the transaction is committed and the chunk mutex acquired it's possible to allocate a chunk depending on the workload being executed on the replaced device. This bug has been present ever since device replace was introduced but there was never code which checks for it. The correct way to fix is to ensure that there is no pending device modification operation when the chunk mutex is acquire and if there is repeat transaction commit. Unfortunately it's not possible to just exclude the source device from btrfs_fs_devices::dev_alloc_list since this causes ENOSPC to be hit in transaction commit. Fixing that in another way would need to add special cases to handle the last writes and forbid new ones. The looped transaction fix is more obvious, and can be easily backported. The runtime of dev-replace is long so there's no noticeable delay caused by that. Reported-by: David Sterba <dsterba@suse.com> Fixes: 391cd9df81ac ("Btrfs: fix unprotected alloc list insertion during the finishing procedure of replace") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-05-17 07:44:25 +00:00
/*
* We have to use this loop approach because at this point src_device
* has to be available for transaction commit to complete, yet new
* chunks shouldn't be allocated on the device.
*/
while (1) {
trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans)) {
mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
return PTR_ERR(trans);
}
ret = btrfs_commit_transaction(trans);
WARN_ON(ret);
/* Prevent write_all_supers() during the finishing procedure */
mutex_lock(&fs_devices->device_list_mutex);
btrfs: Ensure replaced device doesn't have pending chunk allocation Recent FITRIM work, namely bbbf7243d62d ("btrfs: combine device update operations during transaction commit") combined the way certain operations are recoded in a transaction. As a result an ASSERT was added in dev_replace_finish to ensure the new code works correctly. Unfortunately I got reports that it's possible to trigger the assert, meaning that during a device replace it's possible to have an unfinished chunk allocation on the source device. This is supposed to be prevented by the fact that a transaction is committed before finishing the replace oepration and alter acquiring the chunk mutex. This is not sufficient since by the time the transaction is committed and the chunk mutex acquired it's possible to allocate a chunk depending on the workload being executed on the replaced device. This bug has been present ever since device replace was introduced but there was never code which checks for it. The correct way to fix is to ensure that there is no pending device modification operation when the chunk mutex is acquire and if there is repeat transaction commit. Unfortunately it's not possible to just exclude the source device from btrfs_fs_devices::dev_alloc_list since this causes ENOSPC to be hit in transaction commit. Fixing that in another way would need to add special cases to handle the last writes and forbid new ones. The looped transaction fix is more obvious, and can be easily backported. The runtime of dev-replace is long so there's no noticeable delay caused by that. Reported-by: David Sterba <dsterba@suse.com> Fixes: 391cd9df81ac ("Btrfs: fix unprotected alloc list insertion during the finishing procedure of replace") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-05-17 07:44:25 +00:00
/* Prevent new chunks being allocated on the source device */
mutex_lock(&fs_info->chunk_mutex);
if (!list_empty(&src_device->post_commit_list)) {
mutex_unlock(&fs_devices->device_list_mutex);
btrfs: Ensure replaced device doesn't have pending chunk allocation Recent FITRIM work, namely bbbf7243d62d ("btrfs: combine device update operations during transaction commit") combined the way certain operations are recoded in a transaction. As a result an ASSERT was added in dev_replace_finish to ensure the new code works correctly. Unfortunately I got reports that it's possible to trigger the assert, meaning that during a device replace it's possible to have an unfinished chunk allocation on the source device. This is supposed to be prevented by the fact that a transaction is committed before finishing the replace oepration and alter acquiring the chunk mutex. This is not sufficient since by the time the transaction is committed and the chunk mutex acquired it's possible to allocate a chunk depending on the workload being executed on the replaced device. This bug has been present ever since device replace was introduced but there was never code which checks for it. The correct way to fix is to ensure that there is no pending device modification operation when the chunk mutex is acquire and if there is repeat transaction commit. Unfortunately it's not possible to just exclude the source device from btrfs_fs_devices::dev_alloc_list since this causes ENOSPC to be hit in transaction commit. Fixing that in another way would need to add special cases to handle the last writes and forbid new ones. The looped transaction fix is more obvious, and can be easily backported. The runtime of dev-replace is long so there's no noticeable delay caused by that. Reported-by: David Sterba <dsterba@suse.com> Fixes: 391cd9df81ac ("Btrfs: fix unprotected alloc list insertion during the finishing procedure of replace") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-05-17 07:44:25 +00:00
mutex_unlock(&fs_info->chunk_mutex);
} else {
break;
}
}
down_write(&dev_replace->rwsem);
dev_replace->replace_state =
scrub_ret ? BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED
: BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED;
dev_replace->tgtdev = NULL;
dev_replace->srcdev = NULL;
dev_replace->time_stopped = ktime_get_real_seconds();
dev_replace->item_needs_writeback = 1;
btrfs: fix filesystem corruption after a device replace We use a device's allocation state tree to track ranges in a device used for allocated chunks, and we set ranges in this tree when allocating a new chunk. However after a device replace operation, we were not setting the allocated ranges in the new device's allocation state tree, so that tree is empty after a device replace. This means that a fitrim operation after a device replace will trim the device ranges that have allocated chunks and extents, as we trim every range for which there is not a range marked in the device's allocation state tree. It is also important during chunk allocation, since the device's allocation state is used to determine if a range is already allocated when allocating a new chunk. This is trivial to reproduce and the following script triggers the bug: $ cat reproducer.sh #!/bin/bash DEV1="/dev/sdg" DEV2="/dev/sdh" DEV3="/dev/sdi" wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null # Create a raid1 test fs on 2 devices. mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null mount $DEV1 /mnt/btrfs xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo echo "Starting to replace $DEV1 with $DEV3" btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs echo echo "Running fstrim" fstrim /mnt/btrfs echo echo "Unmounting filesystem" umount /mnt/btrfs echo "Mounting filesystem in degraded mode using $DEV3 only" wipefs -a $DEV1 $DEV2 &> /dev/null mount -o degraded $DEV3 /mnt/btrfs if [ $? -ne 0 ]; then dmesg | tail echo echo "Failed to mount in degraded mode" exit 1 fi echo echo "File foo data (expected all bytes = 0xab):" od -A d -t x1 /mnt/btrfs/foo umount /mnt/btrfs When running the reproducer: $ ./replace-test.sh wrote 10485760/10485760 bytes at offset 0 10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec) Starting to replace /dev/sdg with /dev/sdi Running fstrim Unmounting filesystem Mounting filesystem in degraded mode using /dev/sdi only mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error. [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished [19582.208293] BTRFS info (device sdi): allowing degraded mounts [19582.208298] BTRFS info (device sdi): disk space caching is enabled [19582.208301] BTRFS info (device sdi): has skinny extents [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0 [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5 [19582.231576] BTRFS error (device sdi): open_ctree failed Failed to mount in degraded mode So fix by setting all allocated ranges in the replace target device when the replace operation is finishing, when we are holding the chunk mutex and we can not race with new chunk allocations. A test case for fstests follows soon. Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree") CC: stable@vger.kernel.org # 5.2+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-23 14:30:16 +00:00
/*
* Update allocation state in the new device and replace the old device
* with the new one in the mapping tree.
*/
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
if (!scrub_ret) {
btrfs: fix filesystem corruption after a device replace We use a device's allocation state tree to track ranges in a device used for allocated chunks, and we set ranges in this tree when allocating a new chunk. However after a device replace operation, we were not setting the allocated ranges in the new device's allocation state tree, so that tree is empty after a device replace. This means that a fitrim operation after a device replace will trim the device ranges that have allocated chunks and extents, as we trim every range for which there is not a range marked in the device's allocation state tree. It is also important during chunk allocation, since the device's allocation state is used to determine if a range is already allocated when allocating a new chunk. This is trivial to reproduce and the following script triggers the bug: $ cat reproducer.sh #!/bin/bash DEV1="/dev/sdg" DEV2="/dev/sdh" DEV3="/dev/sdi" wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null # Create a raid1 test fs on 2 devices. mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null mount $DEV1 /mnt/btrfs xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo echo "Starting to replace $DEV1 with $DEV3" btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs echo echo "Running fstrim" fstrim /mnt/btrfs echo echo "Unmounting filesystem" umount /mnt/btrfs echo "Mounting filesystem in degraded mode using $DEV3 only" wipefs -a $DEV1 $DEV2 &> /dev/null mount -o degraded $DEV3 /mnt/btrfs if [ $? -ne 0 ]; then dmesg | tail echo echo "Failed to mount in degraded mode" exit 1 fi echo echo "File foo data (expected all bytes = 0xab):" od -A d -t x1 /mnt/btrfs/foo umount /mnt/btrfs When running the reproducer: $ ./replace-test.sh wrote 10485760/10485760 bytes at offset 0 10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec) Starting to replace /dev/sdg with /dev/sdi Running fstrim Unmounting filesystem Mounting filesystem in degraded mode using /dev/sdi only mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error. [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished [19582.208293] BTRFS info (device sdi): allowing degraded mounts [19582.208298] BTRFS info (device sdi): disk space caching is enabled [19582.208301] BTRFS info (device sdi): has skinny extents [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0 [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5 [19582.231576] BTRFS error (device sdi): open_ctree failed Failed to mount in degraded mode So fix by setting all allocated ranges in the replace target device when the replace operation is finishing, when we are holding the chunk mutex and we can not race with new chunk allocations. A test case for fstests follows soon. Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree") CC: stable@vger.kernel.org # 5.2+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-23 14:30:16 +00:00
scrub_ret = btrfs_set_target_alloc_state(src_device, tgt_device);
if (scrub_ret)
goto error;
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
btrfs_dev_replace_update_device_in_mapping_tree(fs_info,
src_device,
tgt_device);
} else {
if (scrub_ret != -ECANCELED)
btrfs_err_in_rcu(fs_info,
"btrfs_scrub_dev(%s, %llu, %s) failed %d",
btrfs_dev_name(src_device),
src_device->devid,
btrfs_dev_name(tgt_device), scrub_ret);
btrfs: fix filesystem corruption after a device replace We use a device's allocation state tree to track ranges in a device used for allocated chunks, and we set ranges in this tree when allocating a new chunk. However after a device replace operation, we were not setting the allocated ranges in the new device's allocation state tree, so that tree is empty after a device replace. This means that a fitrim operation after a device replace will trim the device ranges that have allocated chunks and extents, as we trim every range for which there is not a range marked in the device's allocation state tree. It is also important during chunk allocation, since the device's allocation state is used to determine if a range is already allocated when allocating a new chunk. This is trivial to reproduce and the following script triggers the bug: $ cat reproducer.sh #!/bin/bash DEV1="/dev/sdg" DEV2="/dev/sdh" DEV3="/dev/sdi" wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null # Create a raid1 test fs on 2 devices. mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null mount $DEV1 /mnt/btrfs xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo echo "Starting to replace $DEV1 with $DEV3" btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs echo echo "Running fstrim" fstrim /mnt/btrfs echo echo "Unmounting filesystem" umount /mnt/btrfs echo "Mounting filesystem in degraded mode using $DEV3 only" wipefs -a $DEV1 $DEV2 &> /dev/null mount -o degraded $DEV3 /mnt/btrfs if [ $? -ne 0 ]; then dmesg | tail echo echo "Failed to mount in degraded mode" exit 1 fi echo echo "File foo data (expected all bytes = 0xab):" od -A d -t x1 /mnt/btrfs/foo umount /mnt/btrfs When running the reproducer: $ ./replace-test.sh wrote 10485760/10485760 bytes at offset 0 10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec) Starting to replace /dev/sdg with /dev/sdi Running fstrim Unmounting filesystem Mounting filesystem in degraded mode using /dev/sdi only mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error. [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished [19582.208293] BTRFS info (device sdi): allowing degraded mounts [19582.208298] BTRFS info (device sdi): disk space caching is enabled [19582.208301] BTRFS info (device sdi): has skinny extents [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0 [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5 [19582.231576] BTRFS error (device sdi): open_ctree failed Failed to mount in degraded mode So fix by setting all allocated ranges in the replace target device when the replace operation is finishing, when we are holding the chunk mutex and we can not race with new chunk allocations. A test case for fstests follows soon. Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree") CC: stable@vger.kernel.org # 5.2+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-23 14:30:16 +00:00
error:
up_write(&dev_replace->rwsem);
mutex_unlock(&fs_info->chunk_mutex);
mutex_unlock(&fs_devices->device_list_mutex);
btrfs: Wait for in-flight bios before freeing target device for raid56 When raid56 dev-replace is cancelled by running scrub, we will free target device without waiting for in-flight bios, causing the following NULL pointer deference or general protection failure. BUG: unable to handle kernel NULL pointer dereference at 00000000000005e0 IP: generic_make_request_checks+0x4d/0x610 CPU: 1 PID: 11676 Comm: kworker/u4:14 Tainted: G O 4.11.0-rc2 #72 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 Workqueue: btrfs-endio-raid56 btrfs_endio_raid56_helper [btrfs] task: ffff88002875b4c0 task.stack: ffffc90001334000 RIP: 0010:generic_make_request_checks+0x4d/0x610 Call Trace: ? generic_make_request+0xc7/0x360 generic_make_request+0x24/0x360 ? generic_make_request+0xc7/0x360 submit_bio+0x64/0x120 ? page_in_rbio+0x4d/0x80 [btrfs] ? rbio_orig_end_io+0x80/0x80 [btrfs] finish_rmw+0x3f4/0x540 [btrfs] validate_rbio_for_rmw+0x36/0x40 [btrfs] raid_rmw_end_io+0x7a/0x90 [btrfs] bio_endio+0x56/0x60 end_workqueue_fn+0x3c/0x40 [btrfs] btrfs_scrubparity_helper+0xef/0x620 [btrfs] btrfs_endio_raid56_helper+0xe/0x10 [btrfs] process_one_work+0x2af/0x720 ? process_one_work+0x22b/0x720 worker_thread+0x4b/0x4f0 kthread+0x10f/0x150 ? process_one_work+0x720/0x720 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x2e/0x40 RIP: generic_make_request_checks+0x4d/0x610 RSP: ffffc90001337bb8 In btrfs_dev_replace_finishing(), we will call btrfs_rm_dev_replace_blocked() to wait bios before destroying the target device when scrub is finished normally. However when dev-replace is aborted, either due to error or cancelled by scrub, we didn't wait for bios, this can lead to use-after-free if there are bios holding the target device. Furthermore, for raid56 scrub, at least 2 places are calling btrfs_map_sblock() without protection of bio_counter, leading to the problem. This patch fixes the problem: 1) Wait for bio_counter before freeing target device when canceling replace 2) When calling btrfs_map_sblock() for raid56, use bio_counter to protect the call. Cc: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-03-29 01:33:21 +00:00
btrfs_rm_dev_replace_blocked(fs_info);
if (tgt_device)
btrfs_destroy_dev_replace_tgtdev(tgt_device);
btrfs: Wait for in-flight bios before freeing target device for raid56 When raid56 dev-replace is cancelled by running scrub, we will free target device without waiting for in-flight bios, causing the following NULL pointer deference or general protection failure. BUG: unable to handle kernel NULL pointer dereference at 00000000000005e0 IP: generic_make_request_checks+0x4d/0x610 CPU: 1 PID: 11676 Comm: kworker/u4:14 Tainted: G O 4.11.0-rc2 #72 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 Workqueue: btrfs-endio-raid56 btrfs_endio_raid56_helper [btrfs] task: ffff88002875b4c0 task.stack: ffffc90001334000 RIP: 0010:generic_make_request_checks+0x4d/0x610 Call Trace: ? generic_make_request+0xc7/0x360 generic_make_request+0x24/0x360 ? generic_make_request+0xc7/0x360 submit_bio+0x64/0x120 ? page_in_rbio+0x4d/0x80 [btrfs] ? rbio_orig_end_io+0x80/0x80 [btrfs] finish_rmw+0x3f4/0x540 [btrfs] validate_rbio_for_rmw+0x36/0x40 [btrfs] raid_rmw_end_io+0x7a/0x90 [btrfs] bio_endio+0x56/0x60 end_workqueue_fn+0x3c/0x40 [btrfs] btrfs_scrubparity_helper+0xef/0x620 [btrfs] btrfs_endio_raid56_helper+0xe/0x10 [btrfs] process_one_work+0x2af/0x720 ? process_one_work+0x22b/0x720 worker_thread+0x4b/0x4f0 kthread+0x10f/0x150 ? process_one_work+0x720/0x720 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x2e/0x40 RIP: generic_make_request_checks+0x4d/0x610 RSP: ffffc90001337bb8 In btrfs_dev_replace_finishing(), we will call btrfs_rm_dev_replace_blocked() to wait bios before destroying the target device when scrub is finished normally. However when dev-replace is aborted, either due to error or cancelled by scrub, we didn't wait for bios, this can lead to use-after-free if there are bios holding the target device. Furthermore, for raid56 scrub, at least 2 places are calling btrfs_map_sblock() without protection of bio_counter, leading to the problem. This patch fixes the problem: 1) Wait for bio_counter before freeing target device when canceling replace 2) When calling btrfs_map_sblock() for raid56, use bio_counter to protect the call. Cc: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-03-29 01:33:21 +00:00
btrfs_rm_dev_replace_unblocked(fs_info);
mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
return scrub_ret;
}
btrfs_info_in_rcu(fs_info,
"dev_replace from %s (devid %llu) to %s finished",
btrfs_dev_name(src_device),
src_device->devid,
btrfs_dev_name(tgt_device));
clear_bit(BTRFS_DEV_STATE_REPLACE_TGT, &tgt_device->dev_state);
tgt_device->devid = src_device->devid;
src_device->devid = BTRFS_DEV_REPLACE_DEVID;
memcpy(uuid_tmp, tgt_device->uuid, sizeof(uuid_tmp));
memcpy(tgt_device->uuid, src_device->uuid, sizeof(tgt_device->uuid));
memcpy(src_device->uuid, uuid_tmp, sizeof(src_device->uuid));
btrfs_device_set_total_bytes(tgt_device, src_device->total_bytes);
btrfs_device_set_disk_total_bytes(tgt_device,
src_device->disk_total_bytes);
btrfs_device_set_bytes_used(tgt_device, src_device->bytes_used);
tgt_device->commit_bytes_used = src_device->bytes_used;
btrfs_assign_next_active_device(src_device, tgt_device);
list_add(&tgt_device->dev_alloc_list, &fs_devices->alloc_list);
fs_devices->rw_devices++;
up_write(&dev_replace->rwsem);
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
btrfs_rm_dev_replace_blocked(fs_info);
btrfs_rm_dev_replace_remove_srcdev(src_device);
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
btrfs_rm_dev_replace_unblocked(fs_info);
/*
* Increment dev_stats_ccnt so that btrfs_run_dev_stats() will
* update on-disk dev stats value during commit transaction
*/
atomic_inc(&tgt_device->dev_stats_ccnt);
/*
* this is again a consistent state where no dev_replace procedure
* is running, the target device is part of the filesystem, the
* source device is not part of the filesystem anymore and its 1st
* superblock is scratched out so that it is no longer marked to
* belong to this filesystem.
*/
mutex_unlock(&fs_info->chunk_mutex);
mutex_unlock(&fs_devices->device_list_mutex);
btrfs: Fix a lockdep warning when running xfstest. The following lockdep warning is triggered during xfstests: [ 1702.980872] ========================================================= [ 1702.981181] [ INFO: possible irq lock inversion dependency detected ] [ 1702.981482] 3.18.0-rc1 #27 Not tainted [ 1702.981781] --------------------------------------------------------- [ 1702.982095] kswapd0/77 just changed the state of lock: [ 1702.982415] (&delayed_node->mutex){+.+.-.}, at: [<ffffffffa03b0b51>] __btrfs_release_delayed_node+0x41/0x1f0 [btrfs] [ 1702.982794] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 1702.983160] (&fs_info->dev_replace.lock){+.+.+.} and interrupts could create inverse lock ordering between them. [ 1702.984675] other info that might help us debug this: [ 1702.985524] Chain exists of: &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock [ 1702.986799] Possible interrupt unsafe locking scenario: [ 1702.987681] CPU0 CPU1 [ 1702.988137] ---- ---- [ 1702.988598] lock(&fs_info->dev_replace.lock); [ 1702.989069] local_irq_disable(); [ 1702.989534] lock(&delayed_node->mutex); [ 1702.990038] lock(&found->groups_sem); [ 1702.990494] <Interrupt> [ 1702.990938] lock(&delayed_node->mutex); [ 1702.991407] *** DEADLOCK *** It is because the btrfs_kobj_{add/rm}_device() will call memory allocation with GFP_KERNEL, which may flush fs page cache to free space, waiting for it self to do the commit, causing the deadlock. To solve the problem, move btrfs_kobj_{add/rm}_device() out of the dev_replace lock range, also involing split the btrfs_rm_dev_replace_srcdev() function into remove and free parts. Now only btrfs_rm_dev_replace_remove_srcdev() is called in dev_replace lock range, and kobj_{add/rm} and btrfs_rm_dev_replace_free_srcdev() are called out of the lock range. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-30 08:52:31 +00:00
/* replace the sysfs entry */
btrfs_sysfs_remove_device(src_device);
btrfs: sysfs, add devid/dev_state kobject and device attributes New sysfs attributes that track the filesystem status of devices, stored in the per-filesystem directory in /sys/fs/btrfs/FSID/devinfo . There's a directory for each device, with name corresponding to the numerical device id. in_fs_metadata - device is in the list of fs metadata missing - device is missing (no device node or block device) replace_target - device is target of replace writeable - writes from fs are allowed These attributes reflect the state of the device::dev_state and created at mount time. Sample output: $ pwd /sys/fs/btrfs/6e1961f1-5918-4ecc-a22f-948897b409f7/devinfo/1/ $ ls in_fs_metadata missing replace_target writeable $ cat missing 0 The output from these attributes are 0 or 1. 0 indicates unset and 1 indicates set. These attributes are readonly. It is observed that the device delete thread and sysfs read thread will not race because the delete thread calls sysfs kobject_put() which in turn waits for existing sysfs read to complete. Note for device replace devid swap: During the replace the target device temporarily assumes devid 0 before assigning the devid of the soruce device. In btrfs_dev_replace_finishing() we remove source sysfs devid using the function btrfs_sysfs_remove_devices_attr(), so after that call kobject_rename() to update the devid in the sysfs. This adds and calls btrfs_sysfs_update_devid() helper function to update the device id. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-06 11:38:31 +00:00
btrfs_sysfs_update_devid(tgt_device);
if (test_bit(BTRFS_DEV_STATE_WRITEABLE, &src_device->dev_state))
btrfs_scratch_superblocks(fs_info, src_device->bdev,
src_device->name->str);
btrfs: Fix a lockdep warning when running xfstest. The following lockdep warning is triggered during xfstests: [ 1702.980872] ========================================================= [ 1702.981181] [ INFO: possible irq lock inversion dependency detected ] [ 1702.981482] 3.18.0-rc1 #27 Not tainted [ 1702.981781] --------------------------------------------------------- [ 1702.982095] kswapd0/77 just changed the state of lock: [ 1702.982415] (&delayed_node->mutex){+.+.-.}, at: [<ffffffffa03b0b51>] __btrfs_release_delayed_node+0x41/0x1f0 [btrfs] [ 1702.982794] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 1702.983160] (&fs_info->dev_replace.lock){+.+.+.} and interrupts could create inverse lock ordering between them. [ 1702.984675] other info that might help us debug this: [ 1702.985524] Chain exists of: &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock [ 1702.986799] Possible interrupt unsafe locking scenario: [ 1702.987681] CPU0 CPU1 [ 1702.988137] ---- ---- [ 1702.988598] lock(&fs_info->dev_replace.lock); [ 1702.989069] local_irq_disable(); [ 1702.989534] lock(&delayed_node->mutex); [ 1702.990038] lock(&found->groups_sem); [ 1702.990494] <Interrupt> [ 1702.990938] lock(&delayed_node->mutex); [ 1702.991407] *** DEADLOCK *** It is because the btrfs_kobj_{add/rm}_device() will call memory allocation with GFP_KERNEL, which may flush fs page cache to free space, waiting for it self to do the commit, causing the deadlock. To solve the problem, move btrfs_kobj_{add/rm}_device() out of the dev_replace lock range, also involing split the btrfs_rm_dev_replace_srcdev() function into remove and free parts. Now only btrfs_rm_dev_replace_remove_srcdev() is called in dev_replace lock range, and kobj_{add/rm} and btrfs_rm_dev_replace_free_srcdev() are called out of the lock range. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-30 08:52:31 +00:00
/* write back the superblocks */
trans = btrfs_start_transaction(root, 0);
if (!IS_ERR(trans))
btrfs_commit_transaction(trans);
mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locks When closing and freeing the source device we could end up doing our final blkdev_put() on the bdev, which will grab the bd_mutex. As such we want to be holding as few locks as possible, so move this call outside of the dev_replace->lock_finishing_cancel_unmount lock. Since we're modifying the fs_devices we need to make sure we're holding the uuid_mutex here, so take that as well. There's a report from syzbot probably hitting one of the cases where the bd_mutex and device_list_mutex are taken in the wrong order, however it's not with device replace, like this patch fixes. As there's no reproducer available so far, we can't verify the fix. https://lore.kernel.org/lkml/000000000000fc04d105afcf86d7@google.com/ dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419 WARNING: possible circular locking dependency detected 5.9.0-rc5-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.0/6878 is trying to acquire lock: ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804 but task is already holding lock: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255 btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109 __btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916 find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline] find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #3 (sb_internal#2){.+.+}-{0:0}: percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x234/0x470 fs/super.c:1672 sb_start_intwrite include/linux/fs.h:1690 [inline] start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624 find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline] find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __flush_work+0x60e/0xac0 kernel/workqueue.c:3041 wb_shutdown+0x180/0x220 mm/backing-dev.c:355 bdi_unregister+0x174/0x590 mm/backing-dev.c:872 del_gendisk+0x820/0xa10 block/genhd.c:933 loop_remove drivers/block/loop.c:2192 [inline] loop_control_ioctl drivers/block/loop.c:2291 [inline] loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (loop_ctl_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 lo_open+0x19/0xd0 drivers/block/loop.c:1893 __blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507 blkdev_get fs/block_dev.c:1639 [inline] blkdev_open+0x227/0x300 fs/block_dev.c:1753 do_dentry_open+0x4b9/0x11b0 fs/open.c:817 do_open fs/namei.c:3251 [inline] path_openat+0x1b9a/0x2730 fs/namei.c:3368 do_filp_open+0x17e/0x3c0 fs/namei.c:3395 do_sys_openat2+0x16d/0x420 fs/open.c:1168 do_sys_open fs/open.c:1184 [inline] __do_sys_open fs/open.c:1192 [inline] __se_sys_open fs/open.c:1188 [inline] __x64_sys_open+0x119/0x1c0 fs/open.c:1188 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&bdev->bd_mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_devs->device_list_mutex); lock(sb_internal#2); lock(&fs_devs->device_list_mutex); lock(&bdev->bd_mutex); *** DEADLOCK *** 3 locks held by syz-executor.0/6878: #0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365 #1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178 #2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 stack backtrace: CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x460027 RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027 RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0 RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460 R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460 Signed-off-by: Josef Bacik <josef@toxicpanda.com> [ add syzbot reference ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-20 15:18:27 +00:00
btrfs_rm_dev_replace_free_srcdev(src_device);
return 0;
}
/*
* Read progress of device replace status according to the state and last
* stored position. The value format is the same as for
* btrfs_dev_replace::progress_1000
*/
static u64 btrfs_dev_replace_progress(struct btrfs_fs_info *fs_info)
{
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
u64 ret = 0;
switch (dev_replace->replace_state) {
case BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED:
ret = 0;
break;
case BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED:
ret = 1000;
break;
case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED:
ret = div64_u64(dev_replace->cursor_left,
div_u64(btrfs_device_get_total_bytes(
dev_replace->srcdev), 1000));
break;
}
return ret;
}
void btrfs_dev_replace_status(struct btrfs_fs_info *fs_info,
struct btrfs_ioctl_dev_replace_args *args)
{
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
down_read(&dev_replace->rwsem);
/* even if !dev_replace_is_valid, the values are good enough for
* the replace_status ioctl */
args->result = BTRFS_IOCTL_DEV_REPLACE_RESULT_NO_ERROR;
args->status.replace_state = dev_replace->replace_state;
args->status.time_started = dev_replace->time_started;
args->status.time_stopped = dev_replace->time_stopped;
args->status.num_write_errors =
atomic64_read(&dev_replace->num_write_errors);
args->status.num_uncorrectable_read_errors =
atomic64_read(&dev_replace->num_uncorrectable_read_errors);
args->status.progress_1000 = btrfs_dev_replace_progress(fs_info);
up_read(&dev_replace->rwsem);
}
int btrfs_dev_replace_cancel(struct btrfs_fs_info *fs_info)
{
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
struct btrfs_device *tgt_device = NULL;
struct btrfs_device *src_device = NULL;
struct btrfs_trans_handle *trans;
struct btrfs_root *root = fs_info->tree_root;
int result;
int ret;
if (sb_rdonly(fs_info->sb))
return -EROFS;
mutex_lock(&dev_replace->lock_finishing_cancel_unmount);
down_write(&dev_replace->rwsem);
switch (dev_replace->replace_state) {
case BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED:
result = BTRFS_IOCTL_DEV_REPLACE_RESULT_NOT_STARTED;
up_write(&dev_replace->rwsem);
btrfs: fix use-after-free due to race between replace start and cancel The device replace cancel thread can race with the replace start thread and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will fail to stop the scrub thread. The scrub thread continues with the scrub for replace which then will try to write to the target device and which is already freed by the cancel thread. scrub_setup_ctx() warns as tgtdev is NULL. struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace) { ... if (is_dev_replace) { WARN_ON(!fs_info->dev_replace.tgtdev); <=== sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO; sctx->wr_tgtdev = fs_info->dev_replace.tgtdev; sctx->flush_all_writes = false; } [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.432970] Call Trace: [ 6852.433202] btrfs_scrub_dev+0x19b/0x5c0 [btrfs] [ 6852.433471] btrfs_dev_replace_start+0x48c/0x6a0 [btrfs] [ 6852.433800] btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs] [ 6852.434097] btrfs_ioctl+0x2476/0x2d20 [btrfs] [ 6852.434365] ? do_sigaction+0x7d/0x1e0 [ 6852.434623] do_vfs_ioctl+0xa9/0x6c0 [ 6852.434865] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435124] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435387] ksys_ioctl+0x60/0x90 [ 6852.435663] __x64_sys_ioctl+0x16/0x20 [ 6852.435907] do_syscall_64+0x50/0x180 [ 6852.436150] entry_SYSCALL_64_after_hwframe+0x49/0xbe Further, as the replace thread enters scrub_write_page_to_dev_replace() without the target device it panics: static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx, struct scrub_page *spage) { ... bio_set_dev(bio, sbio->dev->bdev); <====== [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 .. [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs] [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260 [btrfs] .. [ 6929.721430] Call Trace: [ 6929.721663] scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs] [ 6929.721975] scrub_bio_end_io_worker+0x1af/0x490 [btrfs] [ 6929.722277] normal_work_helper+0xf0/0x4c0 [btrfs] [ 6929.722552] process_one_work+0x1f4/0x520 [ 6929.722805] ? process_one_work+0x16e/0x520 [ 6929.723063] worker_thread+0x46/0x3d0 [ 6929.723313] kthread+0xf8/0x130 [ 6929.723544] ? process_one_work+0x520/0x520 [ 6929.723800] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 6929.724081] ret_from_fork+0x3a/0x50 Fix this by letting the btrfs_dev_replace_finishing() to do the job of cleaning after the cancel, including freeing of the target device. btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns along with the scrub return status. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-14 05:50:26 +00:00
break;
case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED:
btrfs: fix use-after-free due to race between replace start and cancel The device replace cancel thread can race with the replace start thread and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will fail to stop the scrub thread. The scrub thread continues with the scrub for replace which then will try to write to the target device and which is already freed by the cancel thread. scrub_setup_ctx() warns as tgtdev is NULL. struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace) { ... if (is_dev_replace) { WARN_ON(!fs_info->dev_replace.tgtdev); <=== sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO; sctx->wr_tgtdev = fs_info->dev_replace.tgtdev; sctx->flush_all_writes = false; } [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.432970] Call Trace: [ 6852.433202] btrfs_scrub_dev+0x19b/0x5c0 [btrfs] [ 6852.433471] btrfs_dev_replace_start+0x48c/0x6a0 [btrfs] [ 6852.433800] btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs] [ 6852.434097] btrfs_ioctl+0x2476/0x2d20 [btrfs] [ 6852.434365] ? do_sigaction+0x7d/0x1e0 [ 6852.434623] do_vfs_ioctl+0xa9/0x6c0 [ 6852.434865] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435124] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435387] ksys_ioctl+0x60/0x90 [ 6852.435663] __x64_sys_ioctl+0x16/0x20 [ 6852.435907] do_syscall_64+0x50/0x180 [ 6852.436150] entry_SYSCALL_64_after_hwframe+0x49/0xbe Further, as the replace thread enters scrub_write_page_to_dev_replace() without the target device it panics: static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx, struct scrub_page *spage) { ... bio_set_dev(bio, sbio->dev->bdev); <====== [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 .. [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs] [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260 [btrfs] .. [ 6929.721430] Call Trace: [ 6929.721663] scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs] [ 6929.721975] scrub_bio_end_io_worker+0x1af/0x490 [btrfs] [ 6929.722277] normal_work_helper+0xf0/0x4c0 [btrfs] [ 6929.722552] process_one_work+0x1f4/0x520 [ 6929.722805] ? process_one_work+0x16e/0x520 [ 6929.723063] worker_thread+0x46/0x3d0 [ 6929.723313] kthread+0xf8/0x130 [ 6929.723544] ? process_one_work+0x520/0x520 [ 6929.723800] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 6929.724081] ret_from_fork+0x3a/0x50 Fix this by letting the btrfs_dev_replace_finishing() to do the job of cleaning after the cancel, including freeing of the target device. btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns along with the scrub return status. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-14 05:50:26 +00:00
tgt_device = dev_replace->tgtdev;
src_device = dev_replace->srcdev;
up_write(&dev_replace->rwsem);
ret = btrfs_scrub_cancel(fs_info);
if (ret < 0) {
result = BTRFS_IOCTL_DEV_REPLACE_RESULT_NOT_STARTED;
} else {
result = BTRFS_IOCTL_DEV_REPLACE_RESULT_NO_ERROR;
/*
* btrfs_dev_replace_finishing() will handle the
* cleanup part
*/
btrfs_info_in_rcu(fs_info,
"dev_replace from %s (devid %llu) to %s canceled",
btrfs_dev_name(src_device), src_device->devid,
btrfs_dev_name(tgt_device));
}
btrfs: fix use-after-free due to race between replace start and cancel The device replace cancel thread can race with the replace start thread and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will fail to stop the scrub thread. The scrub thread continues with the scrub for replace which then will try to write to the target device and which is already freed by the cancel thread. scrub_setup_ctx() warns as tgtdev is NULL. struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace) { ... if (is_dev_replace) { WARN_ON(!fs_info->dev_replace.tgtdev); <=== sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO; sctx->wr_tgtdev = fs_info->dev_replace.tgtdev; sctx->flush_all_writes = false; } [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.432970] Call Trace: [ 6852.433202] btrfs_scrub_dev+0x19b/0x5c0 [btrfs] [ 6852.433471] btrfs_dev_replace_start+0x48c/0x6a0 [btrfs] [ 6852.433800] btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs] [ 6852.434097] btrfs_ioctl+0x2476/0x2d20 [btrfs] [ 6852.434365] ? do_sigaction+0x7d/0x1e0 [ 6852.434623] do_vfs_ioctl+0xa9/0x6c0 [ 6852.434865] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435124] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435387] ksys_ioctl+0x60/0x90 [ 6852.435663] __x64_sys_ioctl+0x16/0x20 [ 6852.435907] do_syscall_64+0x50/0x180 [ 6852.436150] entry_SYSCALL_64_after_hwframe+0x49/0xbe Further, as the replace thread enters scrub_write_page_to_dev_replace() without the target device it panics: static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx, struct scrub_page *spage) { ... bio_set_dev(bio, sbio->dev->bdev); <====== [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 .. [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs] [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260 [btrfs] .. [ 6929.721430] Call Trace: [ 6929.721663] scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs] [ 6929.721975] scrub_bio_end_io_worker+0x1af/0x490 [btrfs] [ 6929.722277] normal_work_helper+0xf0/0x4c0 [btrfs] [ 6929.722552] process_one_work+0x1f4/0x520 [ 6929.722805] ? process_one_work+0x16e/0x520 [ 6929.723063] worker_thread+0x46/0x3d0 [ 6929.723313] kthread+0xf8/0x130 [ 6929.723544] ? process_one_work+0x520/0x520 [ 6929.723800] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 6929.724081] ret_from_fork+0x3a/0x50 Fix this by letting the btrfs_dev_replace_finishing() to do the job of cleaning after the cancel, including freeing of the target device. btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns along with the scrub return status. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-14 05:50:26 +00:00
break;
case BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED:
btrfs: fix use-after-free due to race between replace start and cancel The device replace cancel thread can race with the replace start thread and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will fail to stop the scrub thread. The scrub thread continues with the scrub for replace which then will try to write to the target device and which is already freed by the cancel thread. scrub_setup_ctx() warns as tgtdev is NULL. struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace) { ... if (is_dev_replace) { WARN_ON(!fs_info->dev_replace.tgtdev); <=== sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO; sctx->wr_tgtdev = fs_info->dev_replace.tgtdev; sctx->flush_all_writes = false; } [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.432970] Call Trace: [ 6852.433202] btrfs_scrub_dev+0x19b/0x5c0 [btrfs] [ 6852.433471] btrfs_dev_replace_start+0x48c/0x6a0 [btrfs] [ 6852.433800] btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs] [ 6852.434097] btrfs_ioctl+0x2476/0x2d20 [btrfs] [ 6852.434365] ? do_sigaction+0x7d/0x1e0 [ 6852.434623] do_vfs_ioctl+0xa9/0x6c0 [ 6852.434865] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435124] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435387] ksys_ioctl+0x60/0x90 [ 6852.435663] __x64_sys_ioctl+0x16/0x20 [ 6852.435907] do_syscall_64+0x50/0x180 [ 6852.436150] entry_SYSCALL_64_after_hwframe+0x49/0xbe Further, as the replace thread enters scrub_write_page_to_dev_replace() without the target device it panics: static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx, struct scrub_page *spage) { ... bio_set_dev(bio, sbio->dev->bdev); <====== [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 .. [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs] [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260 [btrfs] .. [ 6929.721430] Call Trace: [ 6929.721663] scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs] [ 6929.721975] scrub_bio_end_io_worker+0x1af/0x490 [btrfs] [ 6929.722277] normal_work_helper+0xf0/0x4c0 [btrfs] [ 6929.722552] process_one_work+0x1f4/0x520 [ 6929.722805] ? process_one_work+0x16e/0x520 [ 6929.723063] worker_thread+0x46/0x3d0 [ 6929.723313] kthread+0xf8/0x130 [ 6929.723544] ? process_one_work+0x520/0x520 [ 6929.723800] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 6929.724081] ret_from_fork+0x3a/0x50 Fix this by letting the btrfs_dev_replace_finishing() to do the job of cleaning after the cancel, including freeing of the target device. btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns along with the scrub return status. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-14 05:50:26 +00:00
/*
* Scrub doing the replace isn't running so we need to do the
* cleanup step of btrfs_dev_replace_finishing() here
*/
result = BTRFS_IOCTL_DEV_REPLACE_RESULT_NO_ERROR;
tgt_device = dev_replace->tgtdev;
src_device = dev_replace->srcdev;
dev_replace->tgtdev = NULL;
dev_replace->srcdev = NULL;
btrfs: fix use-after-free due to race between replace start and cancel The device replace cancel thread can race with the replace start thread and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will fail to stop the scrub thread. The scrub thread continues with the scrub for replace which then will try to write to the target device and which is already freed by the cancel thread. scrub_setup_ctx() warns as tgtdev is NULL. struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace) { ... if (is_dev_replace) { WARN_ON(!fs_info->dev_replace.tgtdev); <=== sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO; sctx->wr_tgtdev = fs_info->dev_replace.tgtdev; sctx->flush_all_writes = false; } [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.432970] Call Trace: [ 6852.433202] btrfs_scrub_dev+0x19b/0x5c0 [btrfs] [ 6852.433471] btrfs_dev_replace_start+0x48c/0x6a0 [btrfs] [ 6852.433800] btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs] [ 6852.434097] btrfs_ioctl+0x2476/0x2d20 [btrfs] [ 6852.434365] ? do_sigaction+0x7d/0x1e0 [ 6852.434623] do_vfs_ioctl+0xa9/0x6c0 [ 6852.434865] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435124] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435387] ksys_ioctl+0x60/0x90 [ 6852.435663] __x64_sys_ioctl+0x16/0x20 [ 6852.435907] do_syscall_64+0x50/0x180 [ 6852.436150] entry_SYSCALL_64_after_hwframe+0x49/0xbe Further, as the replace thread enters scrub_write_page_to_dev_replace() without the target device it panics: static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx, struct scrub_page *spage) { ... bio_set_dev(bio, sbio->dev->bdev); <====== [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 .. [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs] [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260 [btrfs] .. [ 6929.721430] Call Trace: [ 6929.721663] scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs] [ 6929.721975] scrub_bio_end_io_worker+0x1af/0x490 [btrfs] [ 6929.722277] normal_work_helper+0xf0/0x4c0 [btrfs] [ 6929.722552] process_one_work+0x1f4/0x520 [ 6929.722805] ? process_one_work+0x16e/0x520 [ 6929.723063] worker_thread+0x46/0x3d0 [ 6929.723313] kthread+0xf8/0x130 [ 6929.723544] ? process_one_work+0x520/0x520 [ 6929.723800] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 6929.724081] ret_from_fork+0x3a/0x50 Fix this by letting the btrfs_dev_replace_finishing() to do the job of cleaning after the cancel, including freeing of the target device. btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns along with the scrub return status. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-14 05:50:26 +00:00
dev_replace->replace_state =
BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED;
dev_replace->time_stopped = ktime_get_real_seconds();
dev_replace->item_needs_writeback = 1;
up_write(&dev_replace->rwsem);
/* Scrub for replace must not be running in suspended state */
btrfs_scrub_cancel(fs_info);
btrfs: fix use-after-free due to race between replace start and cancel The device replace cancel thread can race with the replace start thread and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will fail to stop the scrub thread. The scrub thread continues with the scrub for replace which then will try to write to the target device and which is already freed by the cancel thread. scrub_setup_ctx() warns as tgtdev is NULL. struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace) { ... if (is_dev_replace) { WARN_ON(!fs_info->dev_replace.tgtdev); <=== sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO; sctx->wr_tgtdev = fs_info->dev_replace.tgtdev; sctx->flush_all_writes = false; } [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.432970] Call Trace: [ 6852.433202] btrfs_scrub_dev+0x19b/0x5c0 [btrfs] [ 6852.433471] btrfs_dev_replace_start+0x48c/0x6a0 [btrfs] [ 6852.433800] btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs] [ 6852.434097] btrfs_ioctl+0x2476/0x2d20 [btrfs] [ 6852.434365] ? do_sigaction+0x7d/0x1e0 [ 6852.434623] do_vfs_ioctl+0xa9/0x6c0 [ 6852.434865] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435124] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435387] ksys_ioctl+0x60/0x90 [ 6852.435663] __x64_sys_ioctl+0x16/0x20 [ 6852.435907] do_syscall_64+0x50/0x180 [ 6852.436150] entry_SYSCALL_64_after_hwframe+0x49/0xbe Further, as the replace thread enters scrub_write_page_to_dev_replace() without the target device it panics: static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx, struct scrub_page *spage) { ... bio_set_dev(bio, sbio->dev->bdev); <====== [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 .. [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs] [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260 [btrfs] .. [ 6929.721430] Call Trace: [ 6929.721663] scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs] [ 6929.721975] scrub_bio_end_io_worker+0x1af/0x490 [btrfs] [ 6929.722277] normal_work_helper+0xf0/0x4c0 [btrfs] [ 6929.722552] process_one_work+0x1f4/0x520 [ 6929.722805] ? process_one_work+0x16e/0x520 [ 6929.723063] worker_thread+0x46/0x3d0 [ 6929.723313] kthread+0xf8/0x130 [ 6929.723544] ? process_one_work+0x520/0x520 [ 6929.723800] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 6929.724081] ret_from_fork+0x3a/0x50 Fix this by letting the btrfs_dev_replace_finishing() to do the job of cleaning after the cancel, including freeing of the target device. btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns along with the scrub return status. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-14 05:50:26 +00:00
trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans)) {
mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
return PTR_ERR(trans);
}
ret = btrfs_commit_transaction(trans);
WARN_ON(ret);
btrfs: fix use-after-free due to race between replace start and cancel The device replace cancel thread can race with the replace start thread and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will fail to stop the scrub thread. The scrub thread continues with the scrub for replace which then will try to write to the target device and which is already freed by the cancel thread. scrub_setup_ctx() warns as tgtdev is NULL. struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace) { ... if (is_dev_replace) { WARN_ON(!fs_info->dev_replace.tgtdev); <=== sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO; sctx->wr_tgtdev = fs_info->dev_replace.tgtdev; sctx->flush_all_writes = false; } [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.432970] Call Trace: [ 6852.433202] btrfs_scrub_dev+0x19b/0x5c0 [btrfs] [ 6852.433471] btrfs_dev_replace_start+0x48c/0x6a0 [btrfs] [ 6852.433800] btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs] [ 6852.434097] btrfs_ioctl+0x2476/0x2d20 [btrfs] [ 6852.434365] ? do_sigaction+0x7d/0x1e0 [ 6852.434623] do_vfs_ioctl+0xa9/0x6c0 [ 6852.434865] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435124] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435387] ksys_ioctl+0x60/0x90 [ 6852.435663] __x64_sys_ioctl+0x16/0x20 [ 6852.435907] do_syscall_64+0x50/0x180 [ 6852.436150] entry_SYSCALL_64_after_hwframe+0x49/0xbe Further, as the replace thread enters scrub_write_page_to_dev_replace() without the target device it panics: static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx, struct scrub_page *spage) { ... bio_set_dev(bio, sbio->dev->bdev); <====== [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 .. [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs] [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260 [btrfs] .. [ 6929.721430] Call Trace: [ 6929.721663] scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs] [ 6929.721975] scrub_bio_end_io_worker+0x1af/0x490 [btrfs] [ 6929.722277] normal_work_helper+0xf0/0x4c0 [btrfs] [ 6929.722552] process_one_work+0x1f4/0x520 [ 6929.722805] ? process_one_work+0x16e/0x520 [ 6929.723063] worker_thread+0x46/0x3d0 [ 6929.723313] kthread+0xf8/0x130 [ 6929.723544] ? process_one_work+0x520/0x520 [ 6929.723800] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 6929.724081] ret_from_fork+0x3a/0x50 Fix this by letting the btrfs_dev_replace_finishing() to do the job of cleaning after the cancel, including freeing of the target device. btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns along with the scrub return status. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-14 05:50:26 +00:00
btrfs_info_in_rcu(fs_info,
"suspended dev_replace from %s (devid %llu) to %s canceled",
btrfs_dev_name(src_device), src_device->devid,
btrfs_dev_name(tgt_device));
if (tgt_device)
btrfs_destroy_dev_replace_tgtdev(tgt_device);
break;
default:
up_write(&dev_replace->rwsem);
btrfs: fix use-after-free due to race between replace start and cancel The device replace cancel thread can race with the replace start thread and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will fail to stop the scrub thread. The scrub thread continues with the scrub for replace which then will try to write to the target device and which is already freed by the cancel thread. scrub_setup_ctx() warns as tgtdev is NULL. struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace) { ... if (is_dev_replace) { WARN_ON(!fs_info->dev_replace.tgtdev); <=== sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO; sctx->wr_tgtdev = fs_info->dev_replace.tgtdev; sctx->flush_all_writes = false; } [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.432970] Call Trace: [ 6852.433202] btrfs_scrub_dev+0x19b/0x5c0 [btrfs] [ 6852.433471] btrfs_dev_replace_start+0x48c/0x6a0 [btrfs] [ 6852.433800] btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs] [ 6852.434097] btrfs_ioctl+0x2476/0x2d20 [btrfs] [ 6852.434365] ? do_sigaction+0x7d/0x1e0 [ 6852.434623] do_vfs_ioctl+0xa9/0x6c0 [ 6852.434865] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435124] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435387] ksys_ioctl+0x60/0x90 [ 6852.435663] __x64_sys_ioctl+0x16/0x20 [ 6852.435907] do_syscall_64+0x50/0x180 [ 6852.436150] entry_SYSCALL_64_after_hwframe+0x49/0xbe Further, as the replace thread enters scrub_write_page_to_dev_replace() without the target device it panics: static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx, struct scrub_page *spage) { ... bio_set_dev(bio, sbio->dev->bdev); <====== [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 .. [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs] [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260 [btrfs] .. [ 6929.721430] Call Trace: [ 6929.721663] scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs] [ 6929.721975] scrub_bio_end_io_worker+0x1af/0x490 [btrfs] [ 6929.722277] normal_work_helper+0xf0/0x4c0 [btrfs] [ 6929.722552] process_one_work+0x1f4/0x520 [ 6929.722805] ? process_one_work+0x16e/0x520 [ 6929.723063] worker_thread+0x46/0x3d0 [ 6929.723313] kthread+0xf8/0x130 [ 6929.723544] ? process_one_work+0x520/0x520 [ 6929.723800] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 6929.724081] ret_from_fork+0x3a/0x50 Fix this by letting the btrfs_dev_replace_finishing() to do the job of cleaning after the cancel, including freeing of the target device. btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns along with the scrub return status. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-14 05:50:26 +00:00
result = -EINVAL;
}
mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
return result;
}
void btrfs_dev_replace_suspend_for_unmount(struct btrfs_fs_info *fs_info)
{
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
mutex_lock(&dev_replace->lock_finishing_cancel_unmount);
down_write(&dev_replace->rwsem);
switch (dev_replace->replace_state) {
case BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED:
break;
case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED:
dev_replace->replace_state =
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED;
dev_replace->time_stopped = ktime_get_real_seconds();
dev_replace->item_needs_writeback = 1;
btrfs_info(fs_info, "suspending dev_replace for unmount");
break;
}
up_write(&dev_replace->rwsem);
mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
}
/* resume dev_replace procedure that was interrupted by unmount */
int btrfs_resume_dev_replace_async(struct btrfs_fs_info *fs_info)
{
struct task_struct *task;
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
down_write(&dev_replace->rwsem);
switch (dev_replace->replace_state) {
case BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED:
up_write(&dev_replace->rwsem);
return 0;
case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED:
break;
case BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED:
dev_replace->replace_state =
BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED;
break;
}
if (!dev_replace->tgtdev || !dev_replace->tgtdev->bdev) {
btrfs_info(fs_info,
"cannot continue dev_replace, tgtdev is missing");
btrfs_info(fs_info,
"you may cancel the operation after 'mount -o degraded'");
dev_replace->replace_state =
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED;
up_write(&dev_replace->rwsem);
return 0;
}
up_write(&dev_replace->rwsem);
/*
* This could collide with a paused balance, but the exclusive op logic
* should never allow both to start and pause. We don't want to allow
* dev-replace to start anyway.
*/
if (!btrfs_exclop_start(fs_info, BTRFS_EXCLOP_DEV_REPLACE)) {
down_write(&dev_replace->rwsem);
dev_replace->replace_state =
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED;
up_write(&dev_replace->rwsem);
btrfs_info(fs_info,
"cannot resume dev-replace, other exclusive operation running");
return 0;
}
task = kthread_run(btrfs_dev_replace_kthread, fs_info, "btrfs-devrepl");
return PTR_ERR_OR_ZERO(task);
}
static int btrfs_dev_replace_kthread(void *data)
{
struct btrfs_fs_info *fs_info = data;
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
u64 progress;
int ret;
progress = btrfs_dev_replace_progress(fs_info);
progress = div_u64(progress, 10);
btrfs_info_in_rcu(fs_info,
"continuing dev_replace from %s (devid %llu) to target %s @%u%%",
btrfs_dev_name(dev_replace->srcdev),
dev_replace->srcdev->devid,
btrfs_dev_name(dev_replace->tgtdev),
(unsigned int)progress);
ret = btrfs_scrub_dev(fs_info, dev_replace->srcdev->devid,
dev_replace->committed_cursor_left,
btrfs_device_get_total_bytes(dev_replace->srcdev),
&dev_replace->scrub_progress, 0, 1);
ret = btrfs_dev_replace_finishing(fs_info, ret);
WARN_ON(ret && ret != -ECANCELED);
btrfs_exclop_finish(fs_info);
return 0;
}
int __pure btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace)
{
if (!dev_replace->is_valid)
return 0;
switch (dev_replace->replace_state) {
case BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED:
return 0;
case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED:
case BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED:
/*
* return true even if tgtdev is missing (this is
* something that can happen if the dev_replace
* procedure is suspended by an umount and then
* the tgtdev is missing (or "btrfs dev scan") was
* not called and the filesystem is remounted
* in degraded state. This does not stop the
* dev_replace procedure. It needs to be canceled
* manually if the cancellation is wanted.
*/
break;
}
return 1;
}
void btrfs_bio_counter_sub(struct btrfs_fs_info *fs_info, s64 amount)
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
{
percpu_counter_sub(&fs_info->dev_replace.bio_counter, amount);
cond_wake_up_nomb(&fs_info->dev_replace.replace_wait);
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
}
void btrfs_bio_counter_inc_blocked(struct btrfs_fs_info *fs_info)
{
while (1) {
percpu_counter_inc(&fs_info->dev_replace.bio_counter);
if (likely(!test_bit(BTRFS_FS_STATE_DEV_REPLACING,
&fs_info->fs_state)))
break;
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
btrfs_bio_counter_dec(fs_info);
wait_event(fs_info->dev_replace.replace_wait,
Btrfs: fix use-after-free in the finishing procedure of the device replace During device replace test, we hit a null pointer deference (It was very easy to reproduce it by running xfstests' btrfs/011 on the devices with the virtio scsi driver). There were two bugs that caused this problem: - We might allocate new chunks on the replaced device after we updated the mapping tree. And we forgot to replace the source device in those mapping of the new chunks. - We might get the mapping information which including the source device before the mapping information update. And then submit the bio which was based on that mapping information after we freed the source device. For the first bug, we can fix it by doing mapping tree update and source device remove in the same context of the chunk mutex. The chunk mutex is used to protect the allocable device list, the above method can avoid the new chunk allocation, and after we remove the source device, all the new chunks will be allocated on the new device. So it can fix the first bug. For the second bug, we need make sure all flighting bios are finished and no new bios are produced during we are removing the source device. To fix this problem, we introduced a global @bio_counter, we not only inc/dec @bio_counter outsize of map_blocks, but also inc it before submitting bio and dec @bio_counter when ending bios. Since Raid56 is a little different and device replace dosen't support raid56 yet, it is not addressed in the patch and I add comments to make sure we will fix it in the future. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-01-30 08:46:55 +00:00
!test_bit(BTRFS_FS_STATE_DEV_REPLACING,
&fs_info->fs_state));
}
}