linux/drivers/gpio/gpio-pca953x.c

1215 lines
32 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* PCA953x 4/8/16/24/40 bit I/O ports
*
* Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
* Copyright (C) 2007 Marvell International Ltd.
*
* Derived from drivers/i2c/chips/pca9539.c
*/
#include <linux/acpi.h>
#include <linux/bits.h>
#include <linux/bitops.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_data/pca953x.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <asm/unaligned.h>
#define PCA953X_INPUT 0x00
#define PCA953X_OUTPUT 0x01
#define PCA953X_INVERT 0x02
#define PCA953X_DIRECTION 0x03
#define REG_ADDR_MASK GENMASK(5, 0)
#define REG_ADDR_EXT BIT(6)
#define REG_ADDR_AI BIT(7)
#define PCA957X_IN 0x00
#define PCA957X_INVRT 0x01
#define PCA957X_BKEN 0x02
#define PCA957X_PUPD 0x03
#define PCA957X_CFG 0x04
#define PCA957X_OUT 0x05
#define PCA957X_MSK 0x06
#define PCA957X_INTS 0x07
#define PCAL953X_OUT_STRENGTH 0x20
#define PCAL953X_IN_LATCH 0x22
#define PCAL953X_PULL_EN 0x23
#define PCAL953X_PULL_SEL 0x24
#define PCAL953X_INT_MASK 0x25
#define PCAL953X_INT_STAT 0x26
#define PCAL953X_OUT_CONF 0x27
#define PCAL6524_INT_EDGE 0x28
#define PCAL6524_INT_CLR 0x2a
#define PCAL6524_IN_STATUS 0x2b
#define PCAL6524_OUT_INDCONF 0x2c
#define PCAL6524_DEBOUNCE 0x2d
#define PCA_GPIO_MASK GENMASK(7, 0)
#define PCAL_GPIO_MASK GENMASK(4, 0)
#define PCAL_PINCTRL_MASK GENMASK(6, 5)
#define PCA_INT BIT(8)
#define PCA_PCAL BIT(9)
#define PCA_LATCH_INT (PCA_PCAL | PCA_INT)
#define PCA953X_TYPE BIT(12)
#define PCA957X_TYPE BIT(13)
#define PCA_TYPE_MASK GENMASK(15, 12)
#define PCA_CHIP_TYPE(x) ((x) & PCA_TYPE_MASK)
static const struct i2c_device_id pca953x_id[] = {
{ "pca6416", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9505", 40 | PCA953X_TYPE | PCA_INT, },
{ "pca9534", 8 | PCA953X_TYPE | PCA_INT, },
{ "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9536", 4 | PCA953X_TYPE, },
{ "pca9537", 4 | PCA953X_TYPE | PCA_INT, },
{ "pca9538", 8 | PCA953X_TYPE | PCA_INT, },
{ "pca9539", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9554", 8 | PCA953X_TYPE | PCA_INT, },
{ "pca9555", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca9556", 8 | PCA953X_TYPE, },
{ "pca9557", 8 | PCA953X_TYPE, },
{ "pca9574", 8 | PCA957X_TYPE | PCA_INT, },
{ "pca9575", 16 | PCA957X_TYPE | PCA_INT, },
{ "pca9698", 40 | PCA953X_TYPE, },
{ "pcal6416", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
{ "pcal6524", 24 | PCA953X_TYPE | PCA_LATCH_INT, },
{ "pcal9555a", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
{ "max7310", 8 | PCA953X_TYPE, },
{ "max7312", 16 | PCA953X_TYPE | PCA_INT, },
{ "max7313", 16 | PCA953X_TYPE | PCA_INT, },
{ "max7315", 8 | PCA953X_TYPE | PCA_INT, },
{ "max7318", 16 | PCA953X_TYPE | PCA_INT, },
{ "pca6107", 8 | PCA953X_TYPE | PCA_INT, },
{ "tca6408", 8 | PCA953X_TYPE | PCA_INT, },
{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
{ "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
{ "tca9539", 16 | PCA953X_TYPE | PCA_INT, },
{ "tca9554", 8 | PCA953X_TYPE | PCA_INT, },
{ "xra1202", 8 | PCA953X_TYPE },
{ }
};
MODULE_DEVICE_TABLE(i2c, pca953x_id);
static const struct acpi_device_id pca953x_acpi_ids[] = {
{ "INT3491", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
{ }
};
MODULE_DEVICE_TABLE(acpi, pca953x_acpi_ids);
#define MAX_BANK 5
#define BANK_SZ 8
#define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
struct pca953x_reg_config {
int direction;
int output;
int input;
int invert;
};
static const struct pca953x_reg_config pca953x_regs = {
.direction = PCA953X_DIRECTION,
.output = PCA953X_OUTPUT,
.input = PCA953X_INPUT,
.invert = PCA953X_INVERT,
};
static const struct pca953x_reg_config pca957x_regs = {
.direction = PCA957X_CFG,
.output = PCA957X_OUT,
.input = PCA957X_IN,
.invert = PCA957X_INVRT,
};
struct pca953x_chip {
unsigned gpio_start;
struct mutex i2c_lock;
struct regmap *regmap;
#ifdef CONFIG_GPIO_PCA953X_IRQ
struct mutex irq_lock;
u8 irq_mask[MAX_BANK];
u8 irq_stat[MAX_BANK];
u8 irq_trig_raise[MAX_BANK];
u8 irq_trig_fall[MAX_BANK];
struct irq_chip irq_chip;
#endif
atomic_t wakeup_path;
struct i2c_client *client;
struct gpio_chip gpio_chip;
const char *const *names;
unsigned long driver_data;
struct regulator *regulator;
const struct pca953x_reg_config *regs;
};
static int pca953x_bank_shift(struct pca953x_chip *chip)
{
return fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
}
#define PCA953x_BANK_INPUT BIT(0)
#define PCA953x_BANK_OUTPUT BIT(1)
#define PCA953x_BANK_POLARITY BIT(2)
#define PCA953x_BANK_CONFIG BIT(3)
#define PCA957x_BANK_INPUT BIT(0)
#define PCA957x_BANK_POLARITY BIT(1)
#define PCA957x_BANK_BUSHOLD BIT(2)
#define PCA957x_BANK_CONFIG BIT(4)
#define PCA957x_BANK_OUTPUT BIT(5)
#define PCAL9xxx_BANK_IN_LATCH BIT(8 + 2)
#define PCAL9xxx_BANK_PULL_EN BIT(8 + 3)
#define PCAL9xxx_BANK_PULL_SEL BIT(8 + 4)
#define PCAL9xxx_BANK_IRQ_MASK BIT(8 + 5)
#define PCAL9xxx_BANK_IRQ_STAT BIT(8 + 6)
/*
* We care about the following registers:
* - Standard set, below 0x40, each port can be replicated up to 8 times
* - PCA953x standard
* Input port 0x00 + 0 * bank_size R
* Output port 0x00 + 1 * bank_size RW
* Polarity Inversion port 0x00 + 2 * bank_size RW
* Configuration port 0x00 + 3 * bank_size RW
* - PCA957x with mixed up registers
* Input port 0x00 + 0 * bank_size R
* Polarity Inversion port 0x00 + 1 * bank_size RW
* Bus hold port 0x00 + 2 * bank_size RW
* Configuration port 0x00 + 4 * bank_size RW
* Output port 0x00 + 5 * bank_size RW
*
* - Extended set, above 0x40, often chip specific.
* - PCAL6524/PCAL9555A with custom PCAL IRQ handling:
* Input latch register 0x40 + 2 * bank_size RW
* Pull-up/pull-down enable reg 0x40 + 3 * bank_size RW
* Pull-up/pull-down select reg 0x40 + 4 * bank_size RW
* Interrupt mask register 0x40 + 5 * bank_size RW
* Interrupt status register 0x40 + 6 * bank_size R
*
* - Registers with bit 0x80 set, the AI bit
* The bit is cleared and the registers fall into one of the
* categories above.
*/
static bool pca953x_check_register(struct pca953x_chip *chip, unsigned int reg,
u32 checkbank)
{
int bank_shift = pca953x_bank_shift(chip);
int bank = (reg & REG_ADDR_MASK) >> bank_shift;
int offset = reg & (BIT(bank_shift) - 1);
/* Special PCAL extended register check. */
if (reg & REG_ADDR_EXT) {
if (!(chip->driver_data & PCA_PCAL))
return false;
bank += 8;
}
/* Register is not in the matching bank. */
if (!(BIT(bank) & checkbank))
return false;
/* Register is not within allowed range of bank. */
if (offset >= NBANK(chip))
return false;
return true;
}
static bool pca953x_readable_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT |
PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG;
} else {
bank = PCA957x_BANK_INPUT | PCA957x_BANK_OUTPUT |
PCA957x_BANK_POLARITY | PCA957x_BANK_CONFIG |
PCA957x_BANK_BUSHOLD;
}
if (chip->driver_data & PCA_PCAL) {
bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK |
PCAL9xxx_BANK_IRQ_STAT;
}
return pca953x_check_register(chip, reg, bank);
}
static bool pca953x_writeable_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY |
PCA953x_BANK_CONFIG;
} else {
bank = PCA957x_BANK_OUTPUT | PCA957x_BANK_POLARITY |
PCA957x_BANK_CONFIG | PCA957x_BANK_BUSHOLD;
}
if (chip->driver_data & PCA_PCAL)
bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK;
return pca953x_check_register(chip, reg, bank);
}
static bool pca953x_volatile_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
bank = PCA953x_BANK_INPUT;
else
bank = PCA957x_BANK_INPUT;
if (chip->driver_data & PCA_PCAL)
bank |= PCAL9xxx_BANK_IRQ_STAT;
return pca953x_check_register(chip, reg, bank);
}
static const struct regmap_config pca953x_i2c_regmap = {
.reg_bits = 8,
.val_bits = 8,
.readable_reg = pca953x_readable_register,
.writeable_reg = pca953x_writeable_register,
.volatile_reg = pca953x_volatile_register,
.cache_type = REGCACHE_RBTREE,
/* REVISIT: should be 0x7f but some 24 bit chips use REG_ADDR_AI */
.max_register = 0xff,
};
static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off,
bool write, bool addrinc)
{
int bank_shift = pca953x_bank_shift(chip);
int addr = (reg & PCAL_GPIO_MASK) << bank_shift;
int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
u8 regaddr = pinctrl | addr | (off / BANK_SZ);
/* Single byte read doesn't need AI bit set. */
if (!addrinc)
return regaddr;
/* Chips with 24 and more GPIOs always support Auto Increment */
if (write && NBANK(chip) > 2)
regaddr |= REG_ADDR_AI;
/* PCA9575 needs address-increment on multi-byte writes */
if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE)
regaddr |= REG_ADDR_AI;
return regaddr;
}
static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val)
{
u8 regaddr = pca953x_recalc_addr(chip, reg, 0, true, true);
int ret;
ret = regmap_bulk_write(chip->regmap, regaddr, val, NBANK(chip));
if (ret < 0) {
dev_err(&chip->client->dev, "failed writing register\n");
return ret;
}
return 0;
}
static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val)
{
u8 regaddr = pca953x_recalc_addr(chip, reg, 0, false, true);
int ret;
ret = regmap_bulk_read(chip->regmap, regaddr, val, NBANK(chip));
if (ret < 0) {
dev_err(&chip->client->dev, "failed reading register\n");
return ret;
}
return 0;
}
static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
true, false);
u8 bit = BIT(off % BANK_SZ);
int ret;
mutex_lock(&chip->i2c_lock);
ret = regmap_write_bits(chip->regmap, dirreg, bit, bit);
mutex_unlock(&chip->i2c_lock);
return ret;
}
static int pca953x_gpio_direction_output(struct gpio_chip *gc,
unsigned off, int val)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
true, false);
u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off,
true, false);
u8 bit = BIT(off % BANK_SZ);
int ret;
mutex_lock(&chip->i2c_lock);
/* set output level */
ret = regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
if (ret)
goto exit;
/* then direction */
ret = regmap_write_bits(chip->regmap, dirreg, bit, 0);
exit:
mutex_unlock(&chip->i2c_lock);
return ret;
}
static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 inreg = pca953x_recalc_addr(chip, chip->regs->input, off,
true, false);
u8 bit = BIT(off % BANK_SZ);
u32 reg_val;
int ret;
mutex_lock(&chip->i2c_lock);
ret = regmap_read(chip->regmap, inreg, &reg_val);
mutex_unlock(&chip->i2c_lock);
if (ret < 0) {
/* NOTE: diagnostic already emitted; that's all we should
* do unless gpio_*_value_cansleep() calls become different
* from their nonsleeping siblings (and report faults).
*/
return 0;
}
return !!(reg_val & bit);
}
static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off,
true, false);
u8 bit = BIT(off % BANK_SZ);
mutex_lock(&chip->i2c_lock);
regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
mutex_unlock(&chip->i2c_lock);
}
static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off,
true, false);
u8 bit = BIT(off % BANK_SZ);
u32 reg_val;
int ret;
mutex_lock(&chip->i2c_lock);
ret = regmap_read(chip->regmap, dirreg, &reg_val);
mutex_unlock(&chip->i2c_lock);
if (ret < 0)
return ret;
if (reg_val & bit)
return GPIO_LINE_DIRECTION_IN;
return GPIO_LINE_DIRECTION_OUT;
}
static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
unsigned long *mask, unsigned long *bits)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
unsigned long offset;
unsigned long bank_mask;
int bank;
u8 reg_val[MAX_BANK];
int ret;
mutex_lock(&chip->i2c_lock);
ret = pca953x_read_regs(chip, chip->regs->output, reg_val);
if (ret)
goto exit;
for_each_set_clump8(offset, bank_mask, mask, gc->ngpio) {
bank = offset / 8;
reg_val[bank] &= ~bank_mask;
reg_val[bank] |= bitmap_get_value8(bits, offset) & bank_mask;
}
pca953x_write_regs(chip, chip->regs->output, reg_val);
exit:
mutex_unlock(&chip->i2c_lock);
}
static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip,
unsigned int offset,
unsigned long config)
{
u8 pull_en_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_EN, offset,
true, false);
u8 pull_sel_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_SEL, offset,
true, false);
u8 bit = BIT(offset % BANK_SZ);
int ret;
/*
* pull-up/pull-down configuration requires PCAL extended
* registers
*/
if (!(chip->driver_data & PCA_PCAL))
return -ENOTSUPP;
mutex_lock(&chip->i2c_lock);
/* Disable pull-up/pull-down */
ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0);
if (ret)
goto exit;
/* Configure pull-up/pull-down */
if (config == PIN_CONFIG_BIAS_PULL_UP)
ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, bit);
else if (config == PIN_CONFIG_BIAS_PULL_DOWN)
ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, 0);
if (ret)
goto exit;
/* Enable pull-up/pull-down */
ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit);
exit:
mutex_unlock(&chip->i2c_lock);
return ret;
}
static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
unsigned long config)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
switch (config) {
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
return pca953x_gpio_set_pull_up_down(chip, offset, config);
default:
return -ENOTSUPP;
}
}
static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
{
struct gpio_chip *gc;
gc = &chip->gpio_chip;
gc->direction_input = pca953x_gpio_direction_input;
gc->direction_output = pca953x_gpio_direction_output;
gc->get = pca953x_gpio_get_value;
gc->set = pca953x_gpio_set_value;
gc->get_direction = pca953x_gpio_get_direction;
gc->set_multiple = pca953x_gpio_set_multiple;
gc->set_config = pca953x_gpio_set_config;
gc->can_sleep = true;
gc->base = chip->gpio_start;
gc->ngpio = gpios;
gc->label = dev_name(&chip->client->dev);
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 08:56:26 +00:00
gc->parent = &chip->client->dev;
gc->owner = THIS_MODULE;
gc->names = chip->names;
}
#ifdef CONFIG_GPIO_PCA953X_IRQ
static void pca953x_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
chip->irq_mask[d->hwirq / BANK_SZ] &= ~BIT(d->hwirq % BANK_SZ);
}
static void pca953x_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
chip->irq_mask[d->hwirq / BANK_SZ] |= BIT(d->hwirq % BANK_SZ);
}
static int pca953x_irq_set_wake(struct irq_data *d, unsigned int on)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
if (on)
atomic_inc(&chip->wakeup_path);
else
atomic_dec(&chip->wakeup_path);
return irq_set_irq_wake(chip->client->irq, on);
}
static void pca953x_irq_bus_lock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
mutex_lock(&chip->irq_lock);
}
static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 new_irqs;
int level, i;
u8 invert_irq_mask[MAX_BANK];
u8 reg_direction[MAX_BANK];
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
if (chip->driver_data & PCA_PCAL) {
/* Enable latch on interrupt-enabled inputs */
pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask);
for (i = 0; i < NBANK(chip); i++)
invert_irq_mask[i] = ~chip->irq_mask[i];
/* Unmask enabled interrupts */
pca953x_write_regs(chip, PCAL953X_INT_MASK, invert_irq_mask);
}
/* Look for any newly setup interrupt */
for (i = 0; i < NBANK(chip); i++) {
new_irqs = chip->irq_trig_fall[i] | chip->irq_trig_raise[i];
new_irqs &= reg_direction[i];
while (new_irqs) {
level = __ffs(new_irqs);
pca953x_gpio_direction_input(&chip->gpio_chip,
level + (BANK_SZ * i));
new_irqs &= ~(1 << level);
}
}
mutex_unlock(&chip->irq_lock);
}
static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
int bank_nb = d->hwirq / BANK_SZ;
u8 mask = BIT(d->hwirq % BANK_SZ);
if (!(type & IRQ_TYPE_EDGE_BOTH)) {
dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
d->irq, type);
return -EINVAL;
}
if (type & IRQ_TYPE_EDGE_FALLING)
chip->irq_trig_fall[bank_nb] |= mask;
else
chip->irq_trig_fall[bank_nb] &= ~mask;
if (type & IRQ_TYPE_EDGE_RISING)
chip->irq_trig_raise[bank_nb] |= mask;
else
chip->irq_trig_raise[bank_nb] &= ~mask;
return 0;
}
static void pca953x_irq_shutdown(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 mask = BIT(d->hwirq % BANK_SZ);
chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask;
chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask;
}
static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
{
u8 cur_stat[MAX_BANK];
u8 old_stat[MAX_BANK];
bool pending_seen = false;
bool trigger_seen = false;
u8 trigger[MAX_BANK];
u8 reg_direction[MAX_BANK];
int ret, i;
if (chip->driver_data & PCA_PCAL) {
/* Read the current interrupt status from the device */
ret = pca953x_read_regs(chip, PCAL953X_INT_STAT, trigger);
if (ret)
return false;
/* Check latched inputs and clear interrupt status */
ret = pca953x_read_regs(chip, PCA953X_INPUT, cur_stat);
if (ret)
return false;
for (i = 0; i < NBANK(chip); i++) {
/* Apply filter for rising/falling edge selection */
pending[i] = (~cur_stat[i] & chip->irq_trig_fall[i]) |
(cur_stat[i] & chip->irq_trig_raise[i]);
pending[i] &= trigger[i];
if (pending[i])
pending_seen = true;
}
return pending_seen;
}
ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
if (ret)
return false;
/* Remove output pins from the equation */
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
for (i = 0; i < NBANK(chip); i++)
cur_stat[i] &= reg_direction[i];
memcpy(old_stat, chip->irq_stat, NBANK(chip));
for (i = 0; i < NBANK(chip); i++) {
trigger[i] = (cur_stat[i] ^ old_stat[i]) & chip->irq_mask[i];
if (trigger[i])
trigger_seen = true;
}
if (!trigger_seen)
return false;
memcpy(chip->irq_stat, cur_stat, NBANK(chip));
for (i = 0; i < NBANK(chip); i++) {
pending[i] = (old_stat[i] & chip->irq_trig_fall[i]) |
(cur_stat[i] & chip->irq_trig_raise[i]);
pending[i] &= trigger[i];
if (pending[i])
pending_seen = true;
}
return pending_seen;
}
static irqreturn_t pca953x_irq_handler(int irq, void *devid)
{
struct pca953x_chip *chip = devid;
u8 pending[MAX_BANK];
u8 level;
int i;
if (!pca953x_irq_pending(chip, pending))
return IRQ_NONE;
for (i = 0; i < NBANK(chip); i++) {
while (pending[i]) {
level = __ffs(pending[i]);
handle_nested_irq(irq_find_mapping(chip->gpio_chip.irq.domain,
level + (BANK_SZ * i)));
pending[i] &= ~(1 << level);
}
}
return IRQ_HANDLED;
}
static int pca953x_irq_setup(struct pca953x_chip *chip,
int irq_base)
{
struct i2c_client *client = chip->client;
struct irq_chip *irq_chip = &chip->irq_chip;
u8 reg_direction[MAX_BANK];
int ret, i;
if (!client->irq)
return 0;
if (irq_base == -1)
return 0;
if (!(chip->driver_data & PCA_INT))
return 0;
gpio: pca953x: fix nested irqs rescheduling pca953x interrupt controller functionality is implemented using nested threaded IRQs which require parent_irq to be configured properly otherwise below warning can be seen if IRQ core will try re-schedule nested IRQ: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 12 at kernel/irq/manage.c:696 irq_nested_primary_handler+0x30/0x38() Primary handler called for nested irq 301 Modules linked in: uinput ipv6 smsc95xx usbnet mii imx2_wdt etnaviv(C) matrix_keypad matrix_keymap ar1021_i2c CPU: 1 PID: 12 Comm: ksoftirqd/1 Tainted: G WC 4.1.1 #9 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013298>] (dump_backtrace) from [<c0013488>] (show_stack+0x20/0x24) [<c0013468>] (show_stack) from [<c05743c4>] (dump_stack+0x70/0xc0) [<c0574354>] (dump_stack) from [<c002b7b8>] (warn_slowpath_common+0x88/0xc0) [<c002b730>] (warn_slowpath_common) from [<c002b8ac>] (warn_slowpath_fmt+0x40/0x48) [<c002b870>] (warn_slowpath_fmt) from [<c0075798>] (irq_nested_primary_handler+0x30/0x38) [<c0075768>] (irq_nested_primary_handler) from [<c0075200>] (handle_irq_event_percpu+0x70/0x2d0) [<c0075190>] (handle_irq_event_percpu) from [<c00754ac>] (handle_irq_event+0x4c/0x6c) [<c0075460>] (handle_irq_event) from [<c0078204>] (handle_simple_irq+0xa4/0xc8) [<c0078160>] (handle_simple_irq) from [<c0077cd4>] (resend_irqs+0x50/0x7c) [<c0077c84>] (resend_irqs) from [<c002f99c>] (tasklet_action+0x94/0x140) [<c002f908>] (tasklet_action) from [<c002eea8>] (__do_softirq+0xa0/0x3c8) [<c002ee08>] (__do_softirq) from [<c002f208>] (run_ksoftirqd+0x38/0x54) [<c002f1d0>] (run_ksoftirqd) from [<c004b1e4>] (smpboot_thread_fn+0x1f8/0x2f0) [<c004afec>] (smpboot_thread_fn) from [<c0047744>] (kthread+0xe8/0x104) [<c004765c>] (kthread) from [<c000fac8>] (ret_from_fork+0x14/0x2c) ---[ end trace 96052cda48865769 ]--- The issue was reported and described in details by Lothar Waßmann and Christian Gmeiner in https://lkml.org/lkml/2014/9/9/123. Fix it by adding missed call of gpiochip_set_chained_irqchip() so GPIO IRQ chip helpers will set parent_irq for nested IRQs properly. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-07 14:34:49 +00:00
ret = pca953x_read_regs(chip, chip->regs->input, chip->irq_stat);
if (ret)
return ret;
/*
* There is no way to know which GPIO line generated the
* interrupt. We have to rely on the previous read for
* this purpose.
*/
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
for (i = 0; i < NBANK(chip); i++)
chip->irq_stat[i] &= reg_direction[i];
mutex_init(&chip->irq_lock);
ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL, pca953x_irq_handler,
IRQF_TRIGGER_LOW | IRQF_ONESHOT |
IRQF_SHARED,
dev_name(&client->dev), chip);
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
client->irq);
return ret;
}
irq_chip->name = dev_name(&chip->client->dev);
irq_chip->irq_mask = pca953x_irq_mask;
irq_chip->irq_unmask = pca953x_irq_unmask;
irq_chip->irq_set_wake = pca953x_irq_set_wake;
irq_chip->irq_bus_lock = pca953x_irq_bus_lock;
irq_chip->irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock;
irq_chip->irq_set_type = pca953x_irq_set_type;
irq_chip->irq_shutdown = pca953x_irq_shutdown;
ret = gpiochip_irqchip_add_nested(&chip->gpio_chip, irq_chip,
irq_base, handle_simple_irq,
IRQ_TYPE_NONE);
if (ret) {
dev_err(&client->dev,
"could not connect irqchip to gpiochip\n");
return ret;
}
gpiochip_set_nested_irqchip(&chip->gpio_chip, irq_chip, client->irq);
return 0;
}
#else /* CONFIG_GPIO_PCA953X_IRQ */
static int pca953x_irq_setup(struct pca953x_chip *chip,
int irq_base)
{
struct i2c_client *client = chip->client;
if (client->irq && irq_base != -1 && (chip->driver_data & PCA_INT))
dev_warn(&client->dev, "interrupt support not compiled in\n");
return 0;
}
#endif
static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
{
int ret;
u8 val[MAX_BANK];
ret = regcache_sync_region(chip->regmap, chip->regs->output,
chip->regs->output + NBANK(chip));
if (ret)
goto out;
ret = regcache_sync_region(chip->regmap, chip->regs->direction,
chip->regs->direction + NBANK(chip));
if (ret)
goto out;
/* set platform specific polarity inversion */
if (invert)
memset(val, 0xFF, NBANK(chip));
else
memset(val, 0, NBANK(chip));
ret = pca953x_write_regs(chip, chip->regs->invert, val);
out:
return ret;
}
static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
{
int ret;
u8 val[MAX_BANK];
ret = device_pca95xx_init(chip, invert);
if (ret)
goto out;
/* To enable register 6, 7 to control pull up and pull down */
memset(val, 0x02, NBANK(chip));
ret = pca953x_write_regs(chip, PCA957X_BKEN, val);
if (ret)
goto out;
return 0;
out:
return ret;
}
static const struct of_device_id pca953x_dt_ids[];
static int pca953x_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
struct pca953x_platform_data *pdata;
struct pca953x_chip *chip;
int irq_base = 0;
int ret;
u32 invert = 0;
struct regulator *reg;
chip = devm_kzalloc(&client->dev,
sizeof(struct pca953x_chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
pdata = dev_get_platdata(&client->dev);
if (pdata) {
irq_base = pdata->irq_base;
chip->gpio_start = pdata->gpio_base;
invert = pdata->invert;
chip->names = pdata->names;
} else {
struct gpio_desc *reset_gpio;
chip->gpio_start = -1;
irq_base = 0;
/*
* See if we need to de-assert a reset pin.
*
* There is no known ACPI-enabled platforms that are
* using "reset" GPIO. Otherwise any of those platform
* must use _DSD method with corresponding property.
*/
reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(reset_gpio))
return PTR_ERR(reset_gpio);
}
chip->client = client;
reg = devm_regulator_get(&client->dev, "vcc");
if (IS_ERR(reg)) {
ret = PTR_ERR(reg);
if (ret != -EPROBE_DEFER)
dev_err(&client->dev, "reg get err: %d\n", ret);
return ret;
}
ret = regulator_enable(reg);
if (ret) {
dev_err(&client->dev, "reg en err: %d\n", ret);
return ret;
}
chip->regulator = reg;
if (i2c_id) {
chip->driver_data = i2c_id->driver_data;
} else {
const void *match;
match = device_get_match_data(&client->dev);
if (!match) {
ret = -ENODEV;
goto err_exit;
}
chip->driver_data = (uintptr_t)match;
}
i2c_set_clientdata(client, chip);
chip->regmap = devm_regmap_init_i2c(client, &pca953x_i2c_regmap);
if (IS_ERR(chip->regmap)) {
ret = PTR_ERR(chip->regmap);
goto err_exit;
}
regcache_mark_dirty(chip->regmap);
mutex_init(&chip->i2c_lock);
/*
* In case we have an i2c-mux controlled by a GPIO provided by an
* expander using the same driver higher on the device tree, read the
* i2c adapter nesting depth and use the retrieved value as lockdep
* subclass for chip->i2c_lock.
*
* REVISIT: This solution is not complete. It protects us from lockdep
* false positives when the expander controlling the i2c-mux is on
* a different level on the device tree, but not when it's on the same
* level on a different branch (in which case the subclass number
* would be the same).
*
* TODO: Once a correct solution is developed, a similar fix should be
* applied to all other i2c-controlled GPIO expanders (and potentially
* regmap-i2c).
*/
gpio: pca953x: fix an incorrect lockdep warning If an I2C GPIO multiplexer is driven by a GPIO provided by an expander when there's a second expander using the same device driver on one of the I2C bus segments, lockdep prints a deadlock warning when trying to set the direction or the value of the GPIOs provided by the second expander. The below diagram presents the setup: - - - - - ------- --------- Bus segment 1 | | | | | |--------------- Devices | | SCL/SDA | | | | | Linux |-----------| I2C MUX | - - - - - | | | | | Bus segment 2 | | | | |------------------- ------- | --------- | | | - - - - - ------------ | MUX GPIO | | | | | Devices | GPIO | | | | | Expander 1 |---- - - - - - | | | ------------ | SCL/SDA | ------------ | | | GPIO | | Expander 2 | | | ------------ The reason for lockdep warning is that we take the chip->i2c_lock in pca953x_gpio_set_value() or pca953x_gpio_direction_output() and then come right back to pca953x_gpio_set_value() when the GPIO mux kicks in. The locks actually protect different expanders, but for lockdep both are of the same class, so it says: Possible unsafe locking scenario: CPU0 ---- lock(&chip->i2c_lock); lock(&chip->i2c_lock); *** DEADLOCK *** May be due to missing lock nesting notation In order to get rid of the warning, retrieve the adapter nesting depth and use it as lockdep subclass for chip->i2c_lock. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-16 16:02:45 +00:00
lockdep_set_subclass(&chip->i2c_lock,
i2c_adapter_depth(client->adapter));
/* initialize cached registers from their original values.
* we can't share this chip with another i2c master.
*/
pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
chip->regs = &pca953x_regs;
ret = device_pca95xx_init(chip, invert);
} else {
chip->regs = &pca957x_regs;
ret = device_pca957x_init(chip, invert);
}
if (ret)
goto err_exit;
ret = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
if (ret)
goto err_exit;
ret = pca953x_irq_setup(chip, irq_base);
if (ret)
goto err_exit;
if (pdata && pdata->setup) {
ret = pdata->setup(client, chip->gpio_chip.base,
chip->gpio_chip.ngpio, pdata->context);
if (ret < 0)
dev_warn(&client->dev, "setup failed, %d\n", ret);
}
return 0;
err_exit:
regulator_disable(chip->regulator);
return ret;
}
static int pca953x_remove(struct i2c_client *client)
{
struct pca953x_platform_data *pdata = dev_get_platdata(&client->dev);
struct pca953x_chip *chip = i2c_get_clientdata(client);
int ret;
if (pdata && pdata->teardown) {
ret = pdata->teardown(client, chip->gpio_chip.base,
chip->gpio_chip.ngpio, pdata->context);
if (ret < 0)
dev_err(&client->dev, "teardown failed, %d\n", ret);
} else {
ret = 0;
}
regulator_disable(chip->regulator);
return ret;
}
#ifdef CONFIG_PM_SLEEP
static int pca953x_regcache_sync(struct device *dev)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
int ret;
/*
* The ordering between direction and output is important,
* sync these registers first and only then sync the rest.
*/
ret = regcache_sync_region(chip->regmap, chip->regs->direction,
chip->regs->direction + NBANK(chip));
if (ret) {
dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
return ret;
}
ret = regcache_sync_region(chip->regmap, chip->regs->output,
chip->regs->output + NBANK(chip));
if (ret) {
dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
return ret;
}
#ifdef CONFIG_GPIO_PCA953X_IRQ
if (chip->driver_data & PCA_PCAL) {
ret = regcache_sync_region(chip->regmap, PCAL953X_IN_LATCH,
PCAL953X_IN_LATCH + NBANK(chip));
if (ret) {
dev_err(dev, "Failed to sync INT latch registers: %d\n",
ret);
return ret;
}
ret = regcache_sync_region(chip->regmap, PCAL953X_INT_MASK,
PCAL953X_INT_MASK + NBANK(chip));
if (ret) {
dev_err(dev, "Failed to sync INT mask registers: %d\n",
ret);
return ret;
}
}
#endif
return 0;
}
static int pca953x_suspend(struct device *dev)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
regcache_cache_only(chip->regmap, true);
if (atomic_read(&chip->wakeup_path))
device_set_wakeup_path(dev);
else
regulator_disable(chip->regulator);
return 0;
}
static int pca953x_resume(struct device *dev)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
int ret;
if (!atomic_read(&chip->wakeup_path)) {
ret = regulator_enable(chip->regulator);
if (ret) {
dev_err(dev, "Failed to enable regulator: %d\n", ret);
return 0;
}
}
regcache_cache_only(chip->regmap, false);
regcache_mark_dirty(chip->regmap);
ret = pca953x_regcache_sync(dev);
if (ret)
return ret;
ret = regcache_sync(chip->regmap);
if (ret) {
dev_err(dev, "Failed to restore register map: %d\n", ret);
return ret;
}
return 0;
}
#endif
/* convenience to stop overlong match-table lines */
#define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int)
#define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int)
static const struct of_device_id pca953x_dt_ids[] = {
{ .compatible = "nxp,pca6416", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), },
{ .compatible = "nxp,pca9534", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9536", .data = OF_953X( 4, 0), },
{ .compatible = "nxp,pca9537", .data = OF_953X( 4, PCA_INT), },
{ .compatible = "nxp,pca9538", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "nxp,pca9539", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9554", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "nxp,pca9555", .data = OF_953X(16, PCA_INT), },
{ .compatible = "nxp,pca9556", .data = OF_953X( 8, 0), },
{ .compatible = "nxp,pca9557", .data = OF_953X( 8, 0), },
{ .compatible = "nxp,pca9574", .data = OF_957X( 8, PCA_INT), },
{ .compatible = "nxp,pca9575", .data = OF_957X(16, PCA_INT), },
{ .compatible = "nxp,pca9698", .data = OF_953X(40, 0), },
{ .compatible = "nxp,pcal6416", .data = OF_953X(16, PCA_LATCH_INT), },
{ .compatible = "nxp,pcal6524", .data = OF_953X(24, PCA_LATCH_INT), },
{ .compatible = "nxp,pcal9555a", .data = OF_953X(16, PCA_LATCH_INT), },
{ .compatible = "maxim,max7310", .data = OF_953X( 8, 0), },
{ .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), },
{ .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), },
{ .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), },
{ .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "ti,pca9536", .data = OF_953X( 4, 0), },
{ .compatible = "ti,tca6408", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "ti,tca6416", .data = OF_953X(16, PCA_INT), },
{ .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), },
{ .compatible = "ti,tca9539", .data = OF_953X(16, PCA_INT), },
{ .compatible = "onnn,cat9554", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "onnn,pca9654", .data = OF_953X( 8, PCA_INT), },
{ .compatible = "exar,xra1202", .data = OF_953X( 8, 0), },
{ }
};
MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
static SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
static struct i2c_driver pca953x_driver = {
.driver = {
.name = "pca953x",
.pm = &pca953x_pm_ops,
.of_match_table = pca953x_dt_ids,
.acpi_match_table = ACPI_PTR(pca953x_acpi_ids),
},
.probe = pca953x_probe,
.remove = pca953x_remove,
.id_table = pca953x_id,
};
static int __init pca953x_init(void)
{
return i2c_add_driver(&pca953x_driver);
}
/* register after i2c postcore initcall and before
* subsys initcalls that may rely on these GPIOs
*/
subsys_initcall(pca953x_init);
static void __exit pca953x_exit(void)
{
i2c_del_driver(&pca953x_driver);
}
module_exit(pca953x_exit);
MODULE_AUTHOR("eric miao <eric.miao@marvell.com>");
MODULE_DESCRIPTION("GPIO expander driver for PCA953x");
MODULE_LICENSE("GPL");