linux/fs/buffer.c

3041 lines
79 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/fs/buffer.c
*
* Copyright (C) 1991, 1992, 2002 Linus Torvalds
*/
/*
* Start bdflush() with kernel_thread not syscall - Paul Gortmaker, 12/95
*
* Removed a lot of unnecessary code and simplified things now that
* the buffer cache isn't our primary cache - Andrew Tridgell 12/96
*
* Speed up hash, lru, and free list operations. Use gfp() for allocating
* hash table, use SLAB cache for buffer heads. SMP threading. -DaveM
*
* Added 32k buffer block sizes - these are required older ARM systems. - RMK
*
* async buffer flushing, 1999 Andrea Arcangeli <andrea@suse.de>
*/
#include <linux/kernel.h>
#include <linux/sched/signal.h>
#include <linux/syscalls.h>
#include <linux/fs.h>
#include <linux/iomap.h>
#include <linux/mm.h>
#include <linux/percpu.h>
#include <linux/slab.h>
#include <linux/capability.h>
#include <linux/blkdev.h>
#include <linux/file.h>
#include <linux/quotaops.h>
#include <linux/highmem.h>
#include <linux/export.h>
#include <linux/backing-dev.h>
#include <linux/writeback.h>
#include <linux/hash.h>
#include <linux/suspend.h>
#include <linux/buffer_head.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/bio.h>
#include <linux/cpu.h>
#include <linux/bitops.h>
#include <linux/mpage.h>
[PATCH] spinlock consolidation This patch (written by me and also containing many suggestions of Arjan van de Ven) does a major cleanup of the spinlock code. It does the following things: - consolidates and enhances the spinlock/rwlock debugging code - simplifies the asm/spinlock.h files - encapsulates the raw spinlock type and moves generic spinlock features (such as ->break_lock) into the generic code. - cleans up the spinlock code hierarchy to get rid of the spaghetti. Most notably there's now only a single variant of the debugging code, located in lib/spinlock_debug.c. (previously we had one SMP debugging variant per architecture, plus a separate generic one for UP builds) Also, i've enhanced the rwlock debugging facility, it will now track write-owners. There is new spinlock-owner/CPU-tracking on SMP builds too. All locks have lockup detection now, which will work for both soft and hard spin/rwlock lockups. The arch-level include files now only contain the minimally necessary subset of the spinlock code - all the rest that can be generalized now lives in the generic headers: include/asm-i386/spinlock_types.h | 16 include/asm-x86_64/spinlock_types.h | 16 I have also split up the various spinlock variants into separate files, making it easier to see which does what. The new layout is: SMP | UP ----------------------------|----------------------------------- asm/spinlock_types_smp.h | linux/spinlock_types_up.h linux/spinlock_types.h | linux/spinlock_types.h asm/spinlock_smp.h | linux/spinlock_up.h linux/spinlock_api_smp.h | linux/spinlock_api_up.h linux/spinlock.h | linux/spinlock.h /* * here's the role of the various spinlock/rwlock related include files: * * on SMP builds: * * asm/spinlock_types.h: contains the raw_spinlock_t/raw_rwlock_t and the * initializers * * linux/spinlock_types.h: * defines the generic type and initializers * * asm/spinlock.h: contains the __raw_spin_*()/etc. lowlevel * implementations, mostly inline assembly code * * (also included on UP-debug builds:) * * linux/spinlock_api_smp.h: * contains the prototypes for the _spin_*() APIs. * * linux/spinlock.h: builds the final spin_*() APIs. * * on UP builds: * * linux/spinlock_type_up.h: * contains the generic, simplified UP spinlock type. * (which is an empty structure on non-debug builds) * * linux/spinlock_types.h: * defines the generic type and initializers * * linux/spinlock_up.h: * contains the __raw_spin_*()/etc. version of UP * builds. (which are NOPs on non-debug, non-preempt * builds) * * (included on UP-non-debug builds:) * * linux/spinlock_api_up.h: * builds the _spin_*() APIs. * * linux/spinlock.h: builds the final spin_*() APIs. */ All SMP and UP architectures are converted by this patch. arm, i386, ia64, ppc, ppc64, s390/s390x, x64 was build-tested via crosscompilers. m32r, mips, sh, sparc, have not been tested yet, but should be mostly fine. From: Grant Grundler <grundler@parisc-linux.org> Booted and lightly tested on a500-44 (64-bit, SMP kernel, dual CPU). Builds 32-bit SMP kernel (not booted or tested). I did not try to build non-SMP kernels. That should be trivial to fix up later if necessary. I converted bit ops atomic_hash lock to raw_spinlock_t. Doing so avoids some ugly nesting of linux/*.h and asm/*.h files. Those particular locks are well tested and contained entirely inside arch specific code. I do NOT expect any new issues to arise with them. If someone does ever need to use debug/metrics with them, then they will need to unravel this hairball between spinlocks, atomic ops, and bit ops that exist only because parisc has exactly one atomic instruction: LDCW (load and clear word). From: "Luck, Tony" <tony.luck@intel.com> ia64 fix Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjanv@infradead.org> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Mikael Pettersson <mikpe@csd.uu.se> Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 07:25:56 +00:00
#include <linux/bit_spinlock.h>
#include <linux/pagevec.h>
fs, mm: account buffer_head to kmemcg The buffer_head can consume a significant amount of system memory and is directly related to the amount of page cache. In our production environment we have observed that a lot of machines are spending a significant amount of memory as buffer_head and can not be left as system memory overhead. Charging buffer_head is not as simple as adding __GFP_ACCOUNT to the allocation. The buffer_heads can be allocated in a memcg different from the memcg of the page for which buffer_heads are being allocated. One concrete example is memory reclaim. The reclaim can trigger I/O of pages of any memcg on the system. So, the right way to charge buffer_head is to extract the memcg from the page for which buffer_heads are being allocated and then use targeted memcg charging API. [shakeelb@google.com: use __GFP_ACCOUNT for directed memcg charging] Link: http://lkml.kernel.org/r/20180702220208.213380-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627191250.209150-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:46:44 +00:00
#include <linux/sched/mm.h>
#include <trace/events/block.h>
#include <linux/fscrypt.h>
#include "internal.h"
static int fsync_buffers_list(spinlock_t *lock, struct list_head *list);
static void submit_bh_wbc(blk_opf_t opf, struct buffer_head *bh,
struct writeback_control *wbc);
#define BH_ENTRY(list) list_entry((list), struct buffer_head, b_assoc_buffers)
inline void touch_buffer(struct buffer_head *bh)
{
trace_block_touch_buffer(bh);
mark_page_accessed(bh->b_page);
}
EXPORT_SYMBOL(touch_buffer);
void __lock_buffer(struct buffer_head *bh)
{
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 05:16:04 +00:00
wait_on_bit_lock_io(&bh->b_state, BH_Lock, TASK_UNINTERRUPTIBLE);
}
EXPORT_SYMBOL(__lock_buffer);
void unlock_buffer(struct buffer_head *bh)
{
clear_bit_unlock(BH_Lock, &bh->b_state);
smp_mb__after_atomic();
wake_up_bit(&bh->b_state, BH_Lock);
}
EXPORT_SYMBOL(unlock_buffer);
mm: vmscan: take page buffers dirty and locked state into account Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:05 +00:00
/*
* Returns if the folio has dirty or writeback buffers. If all the buffers
* are unlocked and clean then the folio_test_dirty information is stale. If
* any of the buffers are locked, it is assumed they are locked for IO.
mm: vmscan: take page buffers dirty and locked state into account Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:05 +00:00
*/
void buffer_check_dirty_writeback(struct folio *folio,
mm: vmscan: take page buffers dirty and locked state into account Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:05 +00:00
bool *dirty, bool *writeback)
{
struct buffer_head *head, *bh;
*dirty = false;
*writeback = false;
BUG_ON(!folio_test_locked(folio));
mm: vmscan: take page buffers dirty and locked state into account Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:05 +00:00
head = folio_buffers(folio);
if (!head)
mm: vmscan: take page buffers dirty and locked state into account Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:05 +00:00
return;
if (folio_test_writeback(folio))
mm: vmscan: take page buffers dirty and locked state into account Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:05 +00:00
*writeback = true;
bh = head;
do {
if (buffer_locked(bh))
*writeback = true;
if (buffer_dirty(bh))
*dirty = true;
bh = bh->b_this_page;
} while (bh != head);
}
EXPORT_SYMBOL(buffer_check_dirty_writeback);
/*
* Block until a buffer comes unlocked. This doesn't stop it
* from becoming locked again - you have to lock it yourself
* if you want to preserve its state.
*/
void __wait_on_buffer(struct buffer_head * bh)
{
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 05:16:04 +00:00
wait_on_bit_io(&bh->b_state, BH_Lock, TASK_UNINTERRUPTIBLE);
}
EXPORT_SYMBOL(__wait_on_buffer);
static void buffer_io_error(struct buffer_head *bh, char *msg)
{
if (!test_bit(BH_Quiet, &bh->b_state))
printk_ratelimited(KERN_ERR
"Buffer I/O error on dev %pg, logical block %llu%s\n",
bh->b_bdev, (unsigned long long)bh->b_blocknr, msg);
}
/*
* End-of-IO handler helper function which does not touch the bh after
* unlocking it.
* Note: unlock_buffer() sort-of does touch the bh after unlocking it, but
* a race there is benign: unlock_buffer() only use the bh's address for
* hashing after unlocking the buffer, so it doesn't actually touch the bh
* itself.
*/
static void __end_buffer_read_notouch(struct buffer_head *bh, int uptodate)
{
if (uptodate) {
set_buffer_uptodate(bh);
} else {
/* This happens, due to failed read-ahead attempts. */
clear_buffer_uptodate(bh);
}
unlock_buffer(bh);
}
/*
* Default synchronous end-of-IO handler.. Just mark it up-to-date and
* unlock the buffer.
*/
void end_buffer_read_sync(struct buffer_head *bh, int uptodate)
{
__end_buffer_read_notouch(bh, uptodate);
put_bh(bh);
}
EXPORT_SYMBOL(end_buffer_read_sync);
void end_buffer_write_sync(struct buffer_head *bh, int uptodate)
{
if (uptodate) {
set_buffer_uptodate(bh);
} else {
buffer_io_error(bh, ", lost sync page write");
mark_buffer_write_io_error(bh);
clear_buffer_uptodate(bh);
}
unlock_buffer(bh);
put_bh(bh);
}
EXPORT_SYMBOL(end_buffer_write_sync);
/*
* Various filesystems appear to want __find_get_block to be non-blocking.
* But it's the page lock which protects the buffers. To get around this,
* we get exclusion from try_to_free_buffers with the blockdev mapping's
* private_lock.
*
* Hack idea: for the blockdev mapping, private_lock contention
* may be quite high. This code could TryLock the page, and if that
* succeeds, there is no need to take private_lock.
*/
static struct buffer_head *
__find_get_block_slow(struct block_device *bdev, sector_t block)
{
struct inode *bd_inode = bdev->bd_inode;
struct address_space *bd_mapping = bd_inode->i_mapping;
struct buffer_head *ret = NULL;
pgoff_t index;
struct buffer_head *bh;
struct buffer_head *head;
struct page *page;
int all_mapped = 1;
static DEFINE_RATELIMIT_STATE(last_warned, HZ, 1);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
index = block >> (PAGE_SHIFT - bd_inode->i_blkbits);
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:10:31 +00:00
page = find_get_page_flags(bd_mapping, index, FGP_ACCESSED);
if (!page)
goto out;
spin_lock(&bd_mapping->private_lock);
if (!page_has_buffers(page))
goto out_unlock;
head = page_buffers(page);
bh = head;
do {
if (!buffer_mapped(bh))
all_mapped = 0;
else if (bh->b_blocknr == block) {
ret = bh;
get_bh(bh);
goto out_unlock;
}
bh = bh->b_this_page;
} while (bh != head);
/* we might be here because some of the buffers on this page are
* not mapped. This is due to various races between
* file io on the block device and getblk. It gets dealt with
* elsewhere, don't buffer_error if we had some unmapped buffers
*/
ratelimit_set_flags(&last_warned, RATELIMIT_MSG_ON_RELEASE);
if (all_mapped && __ratelimit(&last_warned)) {
printk("__find_get_block_slow() failed. block=%llu, "
"b_blocknr=%llu, b_state=0x%08lx, b_size=%zu, "
"device %pg blocksize: %d\n",
(unsigned long long)block,
(unsigned long long)bh->b_blocknr,
bh->b_state, bh->b_size, bdev,
1 << bd_inode->i_blkbits);
}
out_unlock:
spin_unlock(&bd_mapping->private_lock);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(page);
out:
return ret;
}
static void end_buffer_async_read(struct buffer_head *bh, int uptodate)
{
unsigned long flags;
struct buffer_head *first;
struct buffer_head *tmp;
struct page *page;
int page_uptodate = 1;
BUG_ON(!buffer_async_read(bh));
page = bh->b_page;
if (uptodate) {
set_buffer_uptodate(bh);
} else {
clear_buffer_uptodate(bh);
buffer_io_error(bh, ", async page read");
SetPageError(page);
}
/*
* Be _very_ careful from here on. Bad things can happen if
* two buffer heads end IO at almost the same time and both
* decide that the page is now completely done.
*/
first = page_buffers(page);
spin_lock_irqsave(&first->b_uptodate_lock, flags);
clear_buffer_async_read(bh);
unlock_buffer(bh);
tmp = bh;
do {
if (!buffer_uptodate(tmp))
page_uptodate = 0;
if (buffer_async_read(tmp)) {
BUG_ON(!buffer_locked(tmp));
goto still_busy;
}
tmp = tmp->b_this_page;
} while (tmp != bh);
spin_unlock_irqrestore(&first->b_uptodate_lock, flags);
/*
* If all of the buffers are uptodate then we can set the page
* uptodate.
*/
if (page_uptodate)
SetPageUptodate(page);
unlock_page(page);
return;
still_busy:
spin_unlock_irqrestore(&first->b_uptodate_lock, flags);
return;
}
struct decrypt_bh_ctx {
struct work_struct work;
struct buffer_head *bh;
};
static void decrypt_bh(struct work_struct *work)
{
struct decrypt_bh_ctx *ctx =
container_of(work, struct decrypt_bh_ctx, work);
struct buffer_head *bh = ctx->bh;
int err;
err = fscrypt_decrypt_pagecache_blocks(bh->b_page, bh->b_size,
bh_offset(bh));
end_buffer_async_read(bh, err == 0);
kfree(ctx);
}
/*
* I/O completion handler for block_read_full_folio() - pages
* which come unlocked at the end of I/O.
*/
static void end_buffer_async_read_io(struct buffer_head *bh, int uptodate)
{
/* Decrypt if needed */
if (uptodate &&
fscrypt_inode_uses_fs_layer_crypto(bh->b_page->mapping->host)) {
struct decrypt_bh_ctx *ctx = kmalloc(sizeof(*ctx), GFP_ATOMIC);
if (ctx) {
INIT_WORK(&ctx->work, decrypt_bh);
ctx->bh = bh;
fscrypt_enqueue_decrypt_work(&ctx->work);
return;
}
uptodate = 0;
}
end_buffer_async_read(bh, uptodate);
}
/*
* Completion handler for block_write_full_page() - pages which are unlocked
* during I/O, and which have PageWriteback cleared upon I/O completion.
*/
void end_buffer_async_write(struct buffer_head *bh, int uptodate)
{
unsigned long flags;
struct buffer_head *first;
struct buffer_head *tmp;
struct page *page;
BUG_ON(!buffer_async_write(bh));
page = bh->b_page;
if (uptodate) {
set_buffer_uptodate(bh);
} else {
buffer_io_error(bh, ", lost async page write");
mark_buffer_write_io_error(bh);
clear_buffer_uptodate(bh);
SetPageError(page);
}
first = page_buffers(page);
spin_lock_irqsave(&first->b_uptodate_lock, flags);
clear_buffer_async_write(bh);
unlock_buffer(bh);
tmp = bh->b_this_page;
while (tmp != bh) {
if (buffer_async_write(tmp)) {
BUG_ON(!buffer_locked(tmp));
goto still_busy;
}
tmp = tmp->b_this_page;
}
spin_unlock_irqrestore(&first->b_uptodate_lock, flags);
end_page_writeback(page);
return;
still_busy:
spin_unlock_irqrestore(&first->b_uptodate_lock, flags);
return;
}
EXPORT_SYMBOL(end_buffer_async_write);
/*
* If a page's buffers are under async readin (end_buffer_async_read
* completion) then there is a possibility that another thread of
* control could lock one of the buffers after it has completed
* but while some of the other buffers have not completed. This
* locked buffer would confuse end_buffer_async_read() into not unlocking
* the page. So the absence of BH_Async_Read tells end_buffer_async_read()
* that this buffer is not under async I/O.
*
* The page comes unlocked when it has no locked buffer_async buffers
* left.
*
* PageLocked prevents anyone starting new async I/O reads any of
* the buffers.
*
* PageWriteback is used to prevent simultaneous writeout of the same
* page.
*
* PageLocked prevents anyone from starting writeback of a page which is
* under read I/O (PageWriteback is only ever set against a locked page).
*/
static void mark_buffer_async_read(struct buffer_head *bh)
{
bh->b_end_io = end_buffer_async_read_io;
set_buffer_async_read(bh);
}
static void mark_buffer_async_write_endio(struct buffer_head *bh,
bh_end_io_t *handler)
{
bh->b_end_io = handler;
set_buffer_async_write(bh);
}
void mark_buffer_async_write(struct buffer_head *bh)
{
mark_buffer_async_write_endio(bh, end_buffer_async_write);
}
EXPORT_SYMBOL(mark_buffer_async_write);
/*
* fs/buffer.c contains helper functions for buffer-backed address space's
* fsync functions. A common requirement for buffer-based filesystems is
* that certain data from the backing blockdev needs to be written out for
* a successful fsync(). For example, ext2 indirect blocks need to be
* written back and waited upon before fsync() returns.
*
* The functions mark_buffer_inode_dirty(), fsync_inode_buffers(),
* inode_has_buffers() and invalidate_inode_buffers() are provided for the
* management of a list of dependent buffers at ->i_mapping->private_list.
*
* Locking is a little subtle: try_to_free_buffers() will remove buffers
* from their controlling inode's queue when they are being freed. But
* try_to_free_buffers() will be operating against the *blockdev* mapping
* at the time, not against the S_ISREG file which depends on those buffers.
* So the locking for private_list is via the private_lock in the address_space
* which backs the buffers. Which is different from the address_space
* against which the buffers are listed. So for a particular address_space,
* mapping->private_lock does *not* protect mapping->private_list! In fact,
* mapping->private_list will always be protected by the backing blockdev's
* ->private_lock.
*
* Which introduces a requirement: all buffers on an address_space's
* ->private_list must be from the same address_space: the blockdev's.
*
* address_spaces which do not place buffers at ->private_list via these
* utility functions are free to use private_lock and private_list for
* whatever they want. The only requirement is that list_empty(private_list)
* be true at clear_inode() time.
*
* FIXME: clear_inode should not call invalidate_inode_buffers(). The
* filesystems should do that. invalidate_inode_buffers() should just go
* BUG_ON(!list_empty).
*
* FIXME: mark_buffer_dirty_inode() is a data-plane operation. It should
* take an address_space, not an inode. And it should be called
* mark_buffer_dirty_fsync() to clearly define why those buffers are being
* queued up.
*
* FIXME: mark_buffer_dirty_inode() doesn't need to add the buffer to the
* list if it is already on a list. Because if the buffer is on a list,
* it *must* already be on the right one. If not, the filesystem is being
* silly. This will save a ton of locking. But first we have to ensure
* that buffers are taken *off* the old inode's list when they are freed
* (presumably in truncate). That requires careful auditing of all
* filesystems (do it inside bforget()). It could also be done by bringing
* b_inode back.
*/
/*
* The buffer's backing address_space's private_lock must be held
*/
static void __remove_assoc_queue(struct buffer_head *bh)
{
list_del_init(&bh->b_assoc_buffers);
WARN_ON(!bh->b_assoc_map);
bh->b_assoc_map = NULL;
}
int inode_has_buffers(struct inode *inode)
{
return !list_empty(&inode->i_data.private_list);
}
/*
* osync is designed to support O_SYNC io. It waits synchronously for
* all already-submitted IO to complete, but does not queue any new
* writes to the disk.
*
* To do O_SYNC writes, just queue the buffer writes with write_dirty_buffer
* as you dirty the buffers, and then use osync_inode_buffers to wait for
* completion. Any other dirty buffers which are not yet queued for
* write will not be flushed to disk by the osync.
*/
static int osync_buffers_list(spinlock_t *lock, struct list_head *list)
{
struct buffer_head *bh;
struct list_head *p;
int err = 0;
spin_lock(lock);
repeat:
list_for_each_prev(p, list) {
bh = BH_ENTRY(p);
if (buffer_locked(bh)) {
get_bh(bh);
spin_unlock(lock);
wait_on_buffer(bh);
if (!buffer_uptodate(bh))
err = -EIO;
brelse(bh);
spin_lock(lock);
goto repeat;
}
}
spin_unlock(lock);
return err;
}
void emergency_thaw_bdev(struct super_block *sb)
{
while (sb->s_bdev && !thaw_bdev(sb->s_bdev))
printk(KERN_WARNING "Emergency Thaw on %pg\n", sb->s_bdev);
}
/**
* sync_mapping_buffers - write out & wait upon a mapping's "associated" buffers
* @mapping: the mapping which wants those buffers written
*
* Starts I/O against the buffers at mapping->private_list, and waits upon
* that I/O.
*
* Basically, this is a convenience function for fsync().
* @mapping is a file or directory which needs those buffers to be written for
* a successful fsync().
*/
int sync_mapping_buffers(struct address_space *mapping)
{
struct address_space *buffer_mapping = mapping->private_data;
if (buffer_mapping == NULL || list_empty(&mapping->private_list))
return 0;
return fsync_buffers_list(&buffer_mapping->private_lock,
&mapping->private_list);
}
EXPORT_SYMBOL(sync_mapping_buffers);
/*
* Called when we've recently written block `bblock', and it is known that
* `bblock' was for a buffer_boundary() buffer. This means that the block at
* `bblock + 1' is probably a dirty indirect block. Hunt it down and, if it's
* dirty, schedule it for IO. So that indirects merge nicely with their data.
*/
void write_boundary_block(struct block_device *bdev,
sector_t bblock, unsigned blocksize)
{
struct buffer_head *bh = __find_get_block(bdev, bblock + 1, blocksize);
if (bh) {
if (buffer_dirty(bh))
write_dirty_buffer(bh, 0);
put_bh(bh);
}
}
void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode)
{
struct address_space *mapping = inode->i_mapping;
struct address_space *buffer_mapping = bh->b_page->mapping;
mark_buffer_dirty(bh);
if (!mapping->private_data) {
mapping->private_data = buffer_mapping;
} else {
BUG_ON(mapping->private_data != buffer_mapping);
}
buffer_head: fix private_list handling There are two possible races in handling of private_list in buffer cache. 1) When fsync_buffers_list() processes a private_list, it clears b_assoc_mapping and moves buffer to its private list. Now drop_buffers() comes, sees a buffer is on list so it calls __remove_assoc_queue() which complains about b_assoc_mapping being cleared (as it cannot propagate possible IO error). This race has been actually observed in the wild. 2) When fsync_buffers_list() processes a private_list, mark_buffer_dirty_inode() can be called on bh which is already on the private list of fsync_buffers_list(). As buffer is on some list (note that the check is performed without private_lock), it is not readded to the mapping's private_list and after fsync_buffers_list() finishes, we have a dirty buffer which should be on private_list but it isn't. This race has not been reported, probably because most (but not all) callers of mark_buffer_dirty_inode() hold i_mutex and thus are serialized with fsync(). Fix these issues by not clearing b_assoc_map when fsync_buffers_list() moves buffer to a dedicated list and by reinserting buffer in private_list when it is found dirty after we have submitted buffer for IO. We also change the tests whether a buffer is on a private list from !list_empty(&bh->b_assoc_buffers) to bh->b_assoc_map so that they are single word reads and hence lockless checks are safe. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:59 +00:00
if (!bh->b_assoc_map) {
spin_lock(&buffer_mapping->private_lock);
list_move_tail(&bh->b_assoc_buffers,
&mapping->private_list);
bh->b_assoc_map = mapping;
spin_unlock(&buffer_mapping->private_lock);
}
}
EXPORT_SYMBOL(mark_buffer_dirty_inode);
/*
* Add a page to the dirty page list.
*
* It is a sad fact of life that this function is called from several places
* deeply under spinlocking. It may not sleep.
*
* If the page has buffers, the uptodate buffers are set dirty, to preserve
* dirty-state coherency between the page and the buffers. It the page does
* not have buffers then when they are later attached they will all be set
* dirty.
*
* The buffers are dirtied before the page is dirtied. There's a small race
* window in which a writepage caller may see the page cleanness but not the
* buffer dirtiness. That's fine. If this code were to set the page dirty
* before the buffers, a concurrent writepage caller could clear the page dirty
* bit, see a bunch of clean buffers and we'd end up with dirty buffers/clean
* page on the dirty page list.
*
* We use private_lock to lock against try_to_free_buffers while using the
* page's buffer list. Also use this to protect against clean buffers being
* added to the page after it was set dirty.
*
* FIXME: may need to call ->reservepage here as well. That's rather up to the
* address_space though.
*/
bool block_dirty_folio(struct address_space *mapping, struct folio *folio)
{
struct buffer_head *head;
bool newly_dirty;
spin_lock(&mapping->private_lock);
head = folio_buffers(folio);
if (head) {
struct buffer_head *bh = head;
do {
set_buffer_dirty(bh);
bh = bh->b_this_page;
} while (bh != head);
}
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 21:13:16 +00:00
/*
mm: memcontrol: Use helpers to read page's memcg data Patch series "mm: allow mapping accounted kernel pages to userspace", v6. Currently a non-slab kernel page which has been charged to a memory cgroup can't be mapped to userspace. The underlying reason is simple: PageKmemcg flag is defined as a page type (like buddy, offline, etc), so it takes a bit from a page->mapped counter. Pages with a type set can't be mapped to userspace. But in general the kmemcg flag has nothing to do with mapping to userspace. It only means that the page has been accounted by the page allocator, so it has to be properly uncharged on release. Some bpf maps are mapping the vmalloc-based memory to userspace, and their memory can't be accounted because of this implementation detail. This patchset removes this limitation by moving the PageKmemcg flag into one of the free bits of the page->mem_cgroup pointer. Also it formalizes accesses to the page->mem_cgroup and page->obj_cgroups using new helpers, adds several checks and removes a couple of obsolete functions. As the result the code became more robust with fewer open-coded bit tricks. This patch (of 4): Currently there are many open-coded reads of the page->mem_cgroup pointer, as well as a couple of read helpers, which are barely used. It creates an obstacle on a way to reuse some bits of the pointer for storing additional bits of information. In fact, we already do this for slab pages, where the last bit indicates that a pointer has an attached vector of objcg pointers instead of a regular memcg pointer. This commits uses 2 existing helpers and introduces a new helper to converts all read sides to calls of these helpers: struct mem_cgroup *page_memcg(struct page *page); struct mem_cgroup *page_memcg_rcu(struct page *page); struct mem_cgroup *page_memcg_check(struct page *page); page_memcg_check() is intended to be used in cases when the page can be a slab page and have a memcg pointer pointing at objcg vector. It does check the lowest bit, and if set, returns NULL. page_memcg() contains a VM_BUG_ON_PAGE() check for the page not being a slab page. To make sure nobody uses a direct access, struct page's mem_cgroup/obj_cgroups is converted to unsigned long memcg_data. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Link: https://lkml.kernel.org/r/20201027001657.3398190-1-guro@fb.com Link: https://lkml.kernel.org/r/20201027001657.3398190-2-guro@fb.com Link: https://lore.kernel.org/bpf/20201201215900.3569844-2-guro@fb.com
2020-12-01 21:58:27 +00:00
* Lock out page's memcg migration to keep PageDirty
* synchronized with per-memcg dirty page counters.
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 21:13:16 +00:00
*/
folio_memcg_lock(folio);
newly_dirty = !folio_test_set_dirty(folio);
spin_unlock(&mapping->private_lock);
if (newly_dirty)
__folio_mark_dirty(folio, mapping, 1);
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 21:13:16 +00:00
folio_memcg_unlock(folio);
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 21:13:16 +00:00
if (newly_dirty)
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
return newly_dirty;
}
EXPORT_SYMBOL(block_dirty_folio);
/*
* Write out and wait upon a list of buffers.
*
* We have conflicting pressures: we want to make sure that all
* initially dirty buffers get waited on, but that any subsequently
* dirtied buffers don't. After all, we don't want fsync to last
* forever if somebody is actively writing to the file.
*
* Do this in two main stages: first we copy dirty buffers to a
* temporary inode list, queueing the writes as we go. Then we clean
* up, waiting for those writes to complete.
*
* During this second stage, any subsequent updates to the file may end
* up refiling the buffer on the original inode's dirty list again, so
* there is a chance we will end up with a buffer queued for write but
* not yet completed on that list. So, as a final cleanup we go through
* the osync code to catch these locked, dirty buffers without requeuing
* any newly dirty buffers for write.
*/
static int fsync_buffers_list(spinlock_t *lock, struct list_head *list)
{
struct buffer_head *bh;
struct list_head tmp;
struct address_space *mapping;
int err = 0, err2;
struct blk_plug plug;
INIT_LIST_HEAD(&tmp);
blk_start_plug(&plug);
spin_lock(lock);
while (!list_empty(list)) {
bh = BH_ENTRY(list->next);
buffer_head: fix private_list handling There are two possible races in handling of private_list in buffer cache. 1) When fsync_buffers_list() processes a private_list, it clears b_assoc_mapping and moves buffer to its private list. Now drop_buffers() comes, sees a buffer is on list so it calls __remove_assoc_queue() which complains about b_assoc_mapping being cleared (as it cannot propagate possible IO error). This race has been actually observed in the wild. 2) When fsync_buffers_list() processes a private_list, mark_buffer_dirty_inode() can be called on bh which is already on the private list of fsync_buffers_list(). As buffer is on some list (note that the check is performed without private_lock), it is not readded to the mapping's private_list and after fsync_buffers_list() finishes, we have a dirty buffer which should be on private_list but it isn't. This race has not been reported, probably because most (but not all) callers of mark_buffer_dirty_inode() hold i_mutex and thus are serialized with fsync(). Fix these issues by not clearing b_assoc_map when fsync_buffers_list() moves buffer to a dedicated list and by reinserting buffer in private_list when it is found dirty after we have submitted buffer for IO. We also change the tests whether a buffer is on a private list from !list_empty(&bh->b_assoc_buffers) to bh->b_assoc_map so that they are single word reads and hence lockless checks are safe. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:59 +00:00
mapping = bh->b_assoc_map;
__remove_assoc_queue(bh);
buffer_head: fix private_list handling There are two possible races in handling of private_list in buffer cache. 1) When fsync_buffers_list() processes a private_list, it clears b_assoc_mapping and moves buffer to its private list. Now drop_buffers() comes, sees a buffer is on list so it calls __remove_assoc_queue() which complains about b_assoc_mapping being cleared (as it cannot propagate possible IO error). This race has been actually observed in the wild. 2) When fsync_buffers_list() processes a private_list, mark_buffer_dirty_inode() can be called on bh which is already on the private list of fsync_buffers_list(). As buffer is on some list (note that the check is performed without private_lock), it is not readded to the mapping's private_list and after fsync_buffers_list() finishes, we have a dirty buffer which should be on private_list but it isn't. This race has not been reported, probably because most (but not all) callers of mark_buffer_dirty_inode() hold i_mutex and thus are serialized with fsync(). Fix these issues by not clearing b_assoc_map when fsync_buffers_list() moves buffer to a dedicated list and by reinserting buffer in private_list when it is found dirty after we have submitted buffer for IO. We also change the tests whether a buffer is on a private list from !list_empty(&bh->b_assoc_buffers) to bh->b_assoc_map so that they are single word reads and hence lockless checks are safe. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:59 +00:00
/* Avoid race with mark_buffer_dirty_inode() which does
* a lockless check and we rely on seeing the dirty bit */
smp_mb();
if (buffer_dirty(bh) || buffer_locked(bh)) {
list_add(&bh->b_assoc_buffers, &tmp);
buffer_head: fix private_list handling There are two possible races in handling of private_list in buffer cache. 1) When fsync_buffers_list() processes a private_list, it clears b_assoc_mapping and moves buffer to its private list. Now drop_buffers() comes, sees a buffer is on list so it calls __remove_assoc_queue() which complains about b_assoc_mapping being cleared (as it cannot propagate possible IO error). This race has been actually observed in the wild. 2) When fsync_buffers_list() processes a private_list, mark_buffer_dirty_inode() can be called on bh which is already on the private list of fsync_buffers_list(). As buffer is on some list (note that the check is performed without private_lock), it is not readded to the mapping's private_list and after fsync_buffers_list() finishes, we have a dirty buffer which should be on private_list but it isn't. This race has not been reported, probably because most (but not all) callers of mark_buffer_dirty_inode() hold i_mutex and thus are serialized with fsync(). Fix these issues by not clearing b_assoc_map when fsync_buffers_list() moves buffer to a dedicated list and by reinserting buffer in private_list when it is found dirty after we have submitted buffer for IO. We also change the tests whether a buffer is on a private list from !list_empty(&bh->b_assoc_buffers) to bh->b_assoc_map so that they are single word reads and hence lockless checks are safe. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:59 +00:00
bh->b_assoc_map = mapping;
if (buffer_dirty(bh)) {
get_bh(bh);
spin_unlock(lock);
/*
* Ensure any pending I/O completes so that
* write_dirty_buffer() actually writes the
* current contents - it is a noop if I/O is
* still in flight on potentially older
* contents.
*/
write_dirty_buffer(bh, REQ_SYNC);
/*
* Kick off IO for the previous mapping. Note
* that we will not run the very last mapping,
* wait_on_buffer() will do that for us
* through sync_buffer().
*/
brelse(bh);
spin_lock(lock);
}
}
}
spin_unlock(lock);
blk_finish_plug(&plug);
spin_lock(lock);
while (!list_empty(&tmp)) {
bh = BH_ENTRY(tmp.prev);
get_bh(bh);
buffer_head: fix private_list handling There are two possible races in handling of private_list in buffer cache. 1) When fsync_buffers_list() processes a private_list, it clears b_assoc_mapping and moves buffer to its private list. Now drop_buffers() comes, sees a buffer is on list so it calls __remove_assoc_queue() which complains about b_assoc_mapping being cleared (as it cannot propagate possible IO error). This race has been actually observed in the wild. 2) When fsync_buffers_list() processes a private_list, mark_buffer_dirty_inode() can be called on bh which is already on the private list of fsync_buffers_list(). As buffer is on some list (note that the check is performed without private_lock), it is not readded to the mapping's private_list and after fsync_buffers_list() finishes, we have a dirty buffer which should be on private_list but it isn't. This race has not been reported, probably because most (but not all) callers of mark_buffer_dirty_inode() hold i_mutex and thus are serialized with fsync(). Fix these issues by not clearing b_assoc_map when fsync_buffers_list() moves buffer to a dedicated list and by reinserting buffer in private_list when it is found dirty after we have submitted buffer for IO. We also change the tests whether a buffer is on a private list from !list_empty(&bh->b_assoc_buffers) to bh->b_assoc_map so that they are single word reads and hence lockless checks are safe. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:59 +00:00
mapping = bh->b_assoc_map;
__remove_assoc_queue(bh);
/* Avoid race with mark_buffer_dirty_inode() which does
* a lockless check and we rely on seeing the dirty bit */
smp_mb();
if (buffer_dirty(bh)) {
list_add(&bh->b_assoc_buffers,
&mapping->private_list);
buffer_head: fix private_list handling There are two possible races in handling of private_list in buffer cache. 1) When fsync_buffers_list() processes a private_list, it clears b_assoc_mapping and moves buffer to its private list. Now drop_buffers() comes, sees a buffer is on list so it calls __remove_assoc_queue() which complains about b_assoc_mapping being cleared (as it cannot propagate possible IO error). This race has been actually observed in the wild. 2) When fsync_buffers_list() processes a private_list, mark_buffer_dirty_inode() can be called on bh which is already on the private list of fsync_buffers_list(). As buffer is on some list (note that the check is performed without private_lock), it is not readded to the mapping's private_list and after fsync_buffers_list() finishes, we have a dirty buffer which should be on private_list but it isn't. This race has not been reported, probably because most (but not all) callers of mark_buffer_dirty_inode() hold i_mutex and thus are serialized with fsync(). Fix these issues by not clearing b_assoc_map when fsync_buffers_list() moves buffer to a dedicated list and by reinserting buffer in private_list when it is found dirty after we have submitted buffer for IO. We also change the tests whether a buffer is on a private list from !list_empty(&bh->b_assoc_buffers) to bh->b_assoc_map so that they are single word reads and hence lockless checks are safe. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:59 +00:00
bh->b_assoc_map = mapping;
}
spin_unlock(lock);
wait_on_buffer(bh);
if (!buffer_uptodate(bh))
err = -EIO;
brelse(bh);
spin_lock(lock);
}
spin_unlock(lock);
err2 = osync_buffers_list(lock, list);
if (err)
return err;
else
return err2;
}
/*
* Invalidate any and all dirty buffers on a given inode. We are
* probably unmounting the fs, but that doesn't mean we have already
* done a sync(). Just drop the buffers from the inode list.
*
* NOTE: we take the inode's blockdev's mapping's private_lock. Which
* assumes that all the buffers are against the blockdev. Not true
* for reiserfs.
*/
void invalidate_inode_buffers(struct inode *inode)
{
if (inode_has_buffers(inode)) {
struct address_space *mapping = &inode->i_data;
struct list_head *list = &mapping->private_list;
struct address_space *buffer_mapping = mapping->private_data;
spin_lock(&buffer_mapping->private_lock);
while (!list_empty(list))
__remove_assoc_queue(BH_ENTRY(list->next));
spin_unlock(&buffer_mapping->private_lock);
}
}
EXPORT_SYMBOL(invalidate_inode_buffers);
/*
* Remove any clean buffers from the inode's buffer list. This is called
* when we're trying to free the inode itself. Those buffers can pin it.
*
* Returns true if all buffers were removed.
*/
int remove_inode_buffers(struct inode *inode)
{
int ret = 1;
if (inode_has_buffers(inode)) {
struct address_space *mapping = &inode->i_data;
struct list_head *list = &mapping->private_list;
struct address_space *buffer_mapping = mapping->private_data;
spin_lock(&buffer_mapping->private_lock);
while (!list_empty(list)) {
struct buffer_head *bh = BH_ENTRY(list->next);
if (buffer_dirty(bh)) {
ret = 0;
break;
}
__remove_assoc_queue(bh);
}
spin_unlock(&buffer_mapping->private_lock);
}
return ret;
}
/*
* Create the appropriate buffers when given a page for data area and
* the size of each buffer.. Use the bh->b_this_page linked list to
* follow the buffers created. Return NULL if unable to create more
* buffers.
*
* The retry flag is used to differentiate async IO (paging, swapping)
* which may not fail from ordinary buffer allocations.
*/
struct buffer_head *alloc_page_buffers(struct page *page, unsigned long size,
bool retry)
{
struct buffer_head *bh, *head;
fs, mm: account buffer_head to kmemcg The buffer_head can consume a significant amount of system memory and is directly related to the amount of page cache. In our production environment we have observed that a lot of machines are spending a significant amount of memory as buffer_head and can not be left as system memory overhead. Charging buffer_head is not as simple as adding __GFP_ACCOUNT to the allocation. The buffer_heads can be allocated in a memcg different from the memcg of the page for which buffer_heads are being allocated. One concrete example is memory reclaim. The reclaim can trigger I/O of pages of any memcg on the system. So, the right way to charge buffer_head is to extract the memcg from the page for which buffer_heads are being allocated and then use targeted memcg charging API. [shakeelb@google.com: use __GFP_ACCOUNT for directed memcg charging] Link: http://lkml.kernel.org/r/20180702220208.213380-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627191250.209150-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:46:44 +00:00
gfp_t gfp = GFP_NOFS | __GFP_ACCOUNT;
long offset;
mm, memcg: rework remote charging API to support nesting Currently the remote memcg charging API consists of two functions: memalloc_use_memcg() and memalloc_unuse_memcg(), which set and clear the memcg value, which overwrites the memcg of the current task. memalloc_use_memcg(target_memcg); <...> memalloc_unuse_memcg(); It works perfectly for allocations performed from a normal context, however an attempt to call it from an interrupt context or just nest two remote charging blocks will lead to an incorrect accounting. On exit from the inner block the active memcg will be cleared instead of being restored. memalloc_use_memcg(target_memcg); memalloc_use_memcg(target_memcg_2); <...> memalloc_unuse_memcg(); Error: allocation here are charged to the memcg of the current process instead of target_memcg. memalloc_unuse_memcg(); This patch extends the remote charging API by switching to a single function: struct mem_cgroup *set_active_memcg(struct mem_cgroup *memcg), which sets the new value and returns the old one. So a remote charging block will look like: old_memcg = set_active_memcg(target_memcg); <...> set_active_memcg(old_memcg); This patch is heavily based on the patch by Johannes Weiner, which can be found here: https://lkml.org/lkml/2020/5/28/806 . Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Schatzberg <dschatzberg@fb.com> Link: https://lkml.kernel.org/r/20200821212056.3769116-1-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-17 23:13:40 +00:00
struct mem_cgroup *memcg, *old_memcg;
if (retry)
gfp |= __GFP_NOFAIL;
/* The page lock pins the memcg */
memcg = page_memcg(page);
mm, memcg: rework remote charging API to support nesting Currently the remote memcg charging API consists of two functions: memalloc_use_memcg() and memalloc_unuse_memcg(), which set and clear the memcg value, which overwrites the memcg of the current task. memalloc_use_memcg(target_memcg); <...> memalloc_unuse_memcg(); It works perfectly for allocations performed from a normal context, however an attempt to call it from an interrupt context or just nest two remote charging blocks will lead to an incorrect accounting. On exit from the inner block the active memcg will be cleared instead of being restored. memalloc_use_memcg(target_memcg); memalloc_use_memcg(target_memcg_2); <...> memalloc_unuse_memcg(); Error: allocation here are charged to the memcg of the current process instead of target_memcg. memalloc_unuse_memcg(); This patch extends the remote charging API by switching to a single function: struct mem_cgroup *set_active_memcg(struct mem_cgroup *memcg), which sets the new value and returns the old one. So a remote charging block will look like: old_memcg = set_active_memcg(target_memcg); <...> set_active_memcg(old_memcg); This patch is heavily based on the patch by Johannes Weiner, which can be found here: https://lkml.org/lkml/2020/5/28/806 . Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Schatzberg <dschatzberg@fb.com> Link: https://lkml.kernel.org/r/20200821212056.3769116-1-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-17 23:13:40 +00:00
old_memcg = set_active_memcg(memcg);
fs, mm: account buffer_head to kmemcg The buffer_head can consume a significant amount of system memory and is directly related to the amount of page cache. In our production environment we have observed that a lot of machines are spending a significant amount of memory as buffer_head and can not be left as system memory overhead. Charging buffer_head is not as simple as adding __GFP_ACCOUNT to the allocation. The buffer_heads can be allocated in a memcg different from the memcg of the page for which buffer_heads are being allocated. One concrete example is memory reclaim. The reclaim can trigger I/O of pages of any memcg on the system. So, the right way to charge buffer_head is to extract the memcg from the page for which buffer_heads are being allocated and then use targeted memcg charging API. [shakeelb@google.com: use __GFP_ACCOUNT for directed memcg charging] Link: http://lkml.kernel.org/r/20180702220208.213380-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627191250.209150-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:46:44 +00:00
head = NULL;
offset = PAGE_SIZE;
while ((offset -= size) >= 0) {
bh = alloc_buffer_head(gfp);
if (!bh)
goto no_grow;
bh->b_this_page = head;
bh->b_blocknr = -1;
head = bh;
bh->b_size = size;
/* Link the buffer to its page */
set_bh_page(bh, page, offset);
}
fs, mm: account buffer_head to kmemcg The buffer_head can consume a significant amount of system memory and is directly related to the amount of page cache. In our production environment we have observed that a lot of machines are spending a significant amount of memory as buffer_head and can not be left as system memory overhead. Charging buffer_head is not as simple as adding __GFP_ACCOUNT to the allocation. The buffer_heads can be allocated in a memcg different from the memcg of the page for which buffer_heads are being allocated. One concrete example is memory reclaim. The reclaim can trigger I/O of pages of any memcg on the system. So, the right way to charge buffer_head is to extract the memcg from the page for which buffer_heads are being allocated and then use targeted memcg charging API. [shakeelb@google.com: use __GFP_ACCOUNT for directed memcg charging] Link: http://lkml.kernel.org/r/20180702220208.213380-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627191250.209150-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:46:44 +00:00
out:
mm, memcg: rework remote charging API to support nesting Currently the remote memcg charging API consists of two functions: memalloc_use_memcg() and memalloc_unuse_memcg(), which set and clear the memcg value, which overwrites the memcg of the current task. memalloc_use_memcg(target_memcg); <...> memalloc_unuse_memcg(); It works perfectly for allocations performed from a normal context, however an attempt to call it from an interrupt context or just nest two remote charging blocks will lead to an incorrect accounting. On exit from the inner block the active memcg will be cleared instead of being restored. memalloc_use_memcg(target_memcg); memalloc_use_memcg(target_memcg_2); <...> memalloc_unuse_memcg(); Error: allocation here are charged to the memcg of the current process instead of target_memcg. memalloc_unuse_memcg(); This patch extends the remote charging API by switching to a single function: struct mem_cgroup *set_active_memcg(struct mem_cgroup *memcg), which sets the new value and returns the old one. So a remote charging block will look like: old_memcg = set_active_memcg(target_memcg); <...> set_active_memcg(old_memcg); This patch is heavily based on the patch by Johannes Weiner, which can be found here: https://lkml.org/lkml/2020/5/28/806 . Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Schatzberg <dschatzberg@fb.com> Link: https://lkml.kernel.org/r/20200821212056.3769116-1-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-17 23:13:40 +00:00
set_active_memcg(old_memcg);
return head;
/*
* In case anything failed, we just free everything we got.
*/
no_grow:
if (head) {
do {
bh = head;
head = head->b_this_page;
free_buffer_head(bh);
} while (head);
}
fs, mm: account buffer_head to kmemcg The buffer_head can consume a significant amount of system memory and is directly related to the amount of page cache. In our production environment we have observed that a lot of machines are spending a significant amount of memory as buffer_head and can not be left as system memory overhead. Charging buffer_head is not as simple as adding __GFP_ACCOUNT to the allocation. The buffer_heads can be allocated in a memcg different from the memcg of the page for which buffer_heads are being allocated. One concrete example is memory reclaim. The reclaim can trigger I/O of pages of any memcg on the system. So, the right way to charge buffer_head is to extract the memcg from the page for which buffer_heads are being allocated and then use targeted memcg charging API. [shakeelb@google.com: use __GFP_ACCOUNT for directed memcg charging] Link: http://lkml.kernel.org/r/20180702220208.213380-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627191250.209150-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:46:44 +00:00
goto out;
}
EXPORT_SYMBOL_GPL(alloc_page_buffers);
static inline void
link_dev_buffers(struct page *page, struct buffer_head *head)
{
struct buffer_head *bh, *tail;
bh = head;
do {
tail = bh;
bh = bh->b_this_page;
} while (bh);
tail->b_this_page = head;
attach_page_private(page, head);
}
static sector_t blkdev_max_block(struct block_device *bdev, unsigned int size)
{
sector_t retval = ~((sector_t)0);
loff_t sz = bdev_nr_bytes(bdev);
if (sz) {
unsigned int sizebits = blksize_bits(size);
retval = (sz >> sizebits);
}
return retval;
}
/*
* Initialise the state of a blockdev page's buffers.
*/
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
static sector_t
init_page_buffers(struct page *page, struct block_device *bdev,
sector_t block, int size)
{
struct buffer_head *head = page_buffers(page);
struct buffer_head *bh = head;
int uptodate = PageUptodate(page);
sector_t end_block = blkdev_max_block(bdev, size);
do {
if (!buffer_mapped(bh)) {
bh->b_end_io = NULL;
bh->b_private = NULL;
bh->b_bdev = bdev;
bh->b_blocknr = block;
if (uptodate)
set_buffer_uptodate(bh);
block: don't mark buffers beyond end of disk as mapped Hi, We have a bug report open where a squashfs image mounted on ppc64 would exhibit errors due to trying to read beyond the end of the disk. It can easily be reproduced by doing the following: [root@ibm-p750e-02-lp3 ~]# ls -l install.img -rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img [root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test [root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null dd: reading `/dev/loop0': Input/output error 277376+0 records in 277376+0 records out 142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s In dmesg, you'll find the following: squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 43.106012] attempt to access beyond end of device [ 43.106029] loop0: rw=0, want=277410, limit=277408 [ 43.106039] Buffer I/O error on device loop0, logical block 138704 [ 43.106053] attempt to access beyond end of device [ 43.106057] loop0: rw=0, want=277412, limit=277408 [ 43.106061] Buffer I/O error on device loop0, logical block 138705 [ 43.106066] attempt to access beyond end of device [ 43.106070] loop0: rw=0, want=277414, limit=277408 [ 43.106073] Buffer I/O error on device loop0, logical block 138706 [ 43.106078] attempt to access beyond end of device [ 43.106081] loop0: rw=0, want=277416, limit=277408 [ 43.106085] Buffer I/O error on device loop0, logical block 138707 [ 43.106089] attempt to access beyond end of device [ 43.106093] loop0: rw=0, want=277418, limit=277408 [ 43.106096] Buffer I/O error on device loop0, logical block 138708 [ 43.106101] attempt to access beyond end of device [ 43.106104] loop0: rw=0, want=277420, limit=277408 [ 43.106108] Buffer I/O error on device loop0, logical block 138709 [ 43.106112] attempt to access beyond end of device [ 43.106116] loop0: rw=0, want=277422, limit=277408 [ 43.106120] Buffer I/O error on device loop0, logical block 138710 [ 43.106124] attempt to access beyond end of device [ 43.106128] loop0: rw=0, want=277424, limit=277408 [ 43.106131] Buffer I/O error on device loop0, logical block 138711 [ 43.106135] attempt to access beyond end of device [ 43.106139] loop0: rw=0, want=277426, limit=277408 [ 43.106143] Buffer I/O error on device loop0, logical block 138712 [ 43.106147] attempt to access beyond end of device [ 43.106151] loop0: rw=0, want=277428, limit=277408 [ 43.106154] Buffer I/O error on device loop0, logical block 138713 [ 43.106158] attempt to access beyond end of device [ 43.106162] loop0: rw=0, want=277430, limit=277408 [ 43.106166] attempt to access beyond end of device [ 43.106169] loop0: rw=0, want=277432, limit=277408 ... [ 43.106307] attempt to access beyond end of device [ 43.106311] loop0: rw=0, want=277470, limit=2774 Squashfs manages to read in the end block(s) of the disk during the mount operation. Then, when dd reads the block device, it leads to block_read_full_page being called with buffers that are beyond end of disk, but are marked as mapped. Thus, it would end up submitting read I/O against them, resulting in the errors mentioned above. I fixed the problem by modifying init_page_buffers to only set the buffer mapped if it fell inside of i_size. Cheers, Jeff Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Nick Piggin <npiggin@kernel.dk> -- Changes from v1->v2: re-used max_block, as suggested by Nick Piggin. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-11 14:34:10 +00:00
if (block < end_block)
set_buffer_mapped(bh);
}
block++;
bh = bh->b_this_page;
} while (bh != head);
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
/*
* Caller needs to validate requested block against end of device.
*/
return end_block;
}
/*
* Create the page-cache page that contains the requested block.
*
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
* This is used purely for blockdev mappings.
*/
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
static int
grow_dev_page(struct block_device *bdev, sector_t block,
pgoff_t index, int size, int sizebits, gfp_t gfp)
{
struct inode *inode = bdev->bd_inode;
struct page *page;
struct buffer_head *bh;
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
sector_t end_block;
int ret = 0;
gfp_t gfp_mask;
gfp_mask = mapping_gfp_constraint(inode->i_mapping, ~__GFP_FS) | gfp;
/*
* XXX: __getblk_slow() can not really deal with failure and
* will endlessly loop on improvised global reclaim. Prefer
* looping in the allocator rather than here, at least that
* code knows what it's doing.
*/
gfp_mask |= __GFP_NOFAIL;
page = find_or_create_page(inode->i_mapping, index, gfp_mask);
BUG_ON(!PageLocked(page));
if (page_has_buffers(page)) {
bh = page_buffers(page);
if (bh->b_size == size) {
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
end_block = init_page_buffers(page, bdev,
Fix nasty 32-bit overflow bug in buffer i/o code. On 32-bit architectures, the legacy buffer_head functions are not always handling the sector number with the proper 64-bit types, and will thus fail on 4TB+ disks. Any code that uses __getblk() (and thus bread(), breadahead(), sb_bread(), sb_breadahead(), sb_getblk()), and calls it using a 64-bit block on a 32-bit arch (where "long" is 32-bit) causes an inifinite loop in __getblk_slow() with an infinite stream of errors logged to dmesg like this: __find_get_block_slow() failed. block=6740375944, b_blocknr=2445408648 b_state=0x00000020, b_size=512 device sda1 blocksize: 512 Note how in hex block is 0x191C1F988 and b_blocknr is 0x91C1F988 i.e. the top 32-bits are missing (in this case the 0x1 at the top). This is because grow_dev_page() is broken and has a 32-bit overflow due to shifting the page index value (a pgoff_t - which is just 32 bits on 32-bit architectures) left-shifted as the block number. But the top bits to get lost as the pgoff_t is not type cast to sector_t / 64-bit before the shift. This patch fixes this issue by type casting "index" to sector_t before doing the left shift. Note this is not a theoretical bug but has been seen in the field on a 4TiB hard drive with logical sector size 512 bytes. This patch has been verified to fix the infinite loop problem on 3.17-rc5 kernel using a 4TB disk image mounted using "-o loop". Without this patch doing a "find /nt" where /nt is an NTFS volume causes the inifinite loop 100% reproducibly whilst with the patch it works fine as expected. Signed-off-by: Anton Altaparmakov <aia21@cantab.net> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-22 00:53:03 +00:00
(sector_t)index << sizebits,
size);
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
goto done;
}
if (!try_to_free_buffers(page_folio(page)))
goto failed;
}
/*
* Allocate some buffers for this page
*/
bh = alloc_page_buffers(page, size, true);
/*
* Link the page to the buffers and initialise them. Take the
* lock to be atomic wrt __find_get_block(), which does not
* run under the page lock.
*/
spin_lock(&inode->i_mapping->private_lock);
link_dev_buffers(page, bh);
Fix nasty 32-bit overflow bug in buffer i/o code. On 32-bit architectures, the legacy buffer_head functions are not always handling the sector number with the proper 64-bit types, and will thus fail on 4TB+ disks. Any code that uses __getblk() (and thus bread(), breadahead(), sb_bread(), sb_breadahead(), sb_getblk()), and calls it using a 64-bit block on a 32-bit arch (where "long" is 32-bit) causes an inifinite loop in __getblk_slow() with an infinite stream of errors logged to dmesg like this: __find_get_block_slow() failed. block=6740375944, b_blocknr=2445408648 b_state=0x00000020, b_size=512 device sda1 blocksize: 512 Note how in hex block is 0x191C1F988 and b_blocknr is 0x91C1F988 i.e. the top 32-bits are missing (in this case the 0x1 at the top). This is because grow_dev_page() is broken and has a 32-bit overflow due to shifting the page index value (a pgoff_t - which is just 32 bits on 32-bit architectures) left-shifted as the block number. But the top bits to get lost as the pgoff_t is not type cast to sector_t / 64-bit before the shift. This patch fixes this issue by type casting "index" to sector_t before doing the left shift. Note this is not a theoretical bug but has been seen in the field on a 4TiB hard drive with logical sector size 512 bytes. This patch has been verified to fix the infinite loop problem on 3.17-rc5 kernel using a 4TB disk image mounted using "-o loop". Without this patch doing a "find /nt" where /nt is an NTFS volume causes the inifinite loop 100% reproducibly whilst with the patch it works fine as expected. Signed-off-by: Anton Altaparmakov <aia21@cantab.net> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-22 00:53:03 +00:00
end_block = init_page_buffers(page, bdev, (sector_t)index << sizebits,
size);
spin_unlock(&inode->i_mapping->private_lock);
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
done:
ret = (block < end_block) ? 1 : -ENXIO;
failed:
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(page);
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
return ret;
}
/*
* Create buffers for the specified block device block's page. If
* that page was dirty, the buffers are set dirty also.
*/
static int
grow_buffers(struct block_device *bdev, sector_t block, int size, gfp_t gfp)
{
pgoff_t index;
int sizebits;
sizebits = PAGE_SHIFT - __ffs(size);
index = block >> sizebits;
/*
* Check for a block which wants to lie outside our maximum possible
* pagecache index. (this comparison is done using sector_t types).
*/
if (unlikely(index != block >> sizebits)) {
printk(KERN_ERR "%s: requested out-of-range block %llu for "
"device %pg\n",
__func__, (unsigned long long)block,
bdev);
return -EIO;
}
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
/* Create a page with the proper size buffers.. */
return grow_dev_page(bdev, block, index, size, sizebits, gfp);
}
static struct buffer_head *
__getblk_slow(struct block_device *bdev, sector_t block,
unsigned size, gfp_t gfp)
{
/* Size must be multiple of hard sectorsize */
if (unlikely(size & (bdev_logical_block_size(bdev)-1) ||
(size < 512 || size > PAGE_SIZE))) {
printk(KERN_ERR "getblk(): invalid block size %d requested\n",
size);
printk(KERN_ERR "logical block size: %d\n",
bdev_logical_block_size(bdev));
dump_stack();
return NULL;
}
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
for (;;) {
struct buffer_head *bh;
int ret;
bh = __find_get_block(bdev, block, size);
if (bh)
return bh;
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
ret = grow_buffers(bdev, block, size, gfp);
block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-23 10:17:36 +00:00
if (ret < 0)
return NULL;
}
}
/*
* The relationship between dirty buffers and dirty pages:
*
* Whenever a page has any dirty buffers, the page's dirty bit is set, and
* the page is tagged dirty in the page cache.
*
* At all times, the dirtiness of the buffers represents the dirtiness of
* subsections of the page. If the page has buffers, the page dirty bit is
* merely a hint about the true dirty state.
*
* When a page is set dirty in its entirety, all its buffers are marked dirty
* (if the page has buffers).
*
* When a buffer is marked dirty, its page is dirtied, but the page's other
* buffers are not.
*
* Also. When blockdev buffers are explicitly read with bread(), they
* individually become uptodate. But their backing page remains not
* uptodate - even if all of its buffers are uptodate. A subsequent
* block_read_full_folio() against that folio will discover all the uptodate
* buffers, will set the folio uptodate and will perform no I/O.
*/
/**
* mark_buffer_dirty - mark a buffer_head as needing writeout
* @bh: the buffer_head to mark dirty
*
* mark_buffer_dirty() will set the dirty bit against the buffer, then set
* its backing page dirty, then tag the page as dirty in the page cache
* and then attach the address_space's inode to its superblock's dirty
* inode list.
*
* mark_buffer_dirty() is atomic. It takes bh->b_page->mapping->private_lock,
* i_pages lock and mapping->host->i_lock.
*/
void mark_buffer_dirty(struct buffer_head *bh)
{
WARN_ON_ONCE(!buffer_uptodate(bh));
trace_block_dirty_buffer(bh);
/*
* Very *carefully* optimize the it-is-already-dirty case.
*
* Don't let the final "is it dirty" escape to before we
* perhaps modified the buffer.
*/
if (buffer_dirty(bh)) {
smp_mb();
if (buffer_dirty(bh))
return;
}
if (!test_set_buffer_dirty(bh)) {
struct page *page = bh->b_page;
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 21:13:16 +00:00
struct address_space *mapping = NULL;
lock_page_memcg(page);
2009-08-22 00:40:08 +00:00
if (!TestSetPageDirty(page)) {
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 21:13:16 +00:00
mapping = page_mapping(page);
2009-08-22 00:40:08 +00:00
if (mapping)
__set_page_dirty(page, mapping, 0);
2009-08-22 00:40:08 +00:00
}
unlock_page_memcg(page);
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22 21:13:16 +00:00
if (mapping)
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
}
}
EXPORT_SYMBOL(mark_buffer_dirty);
void mark_buffer_write_io_error(struct buffer_head *bh)
{
struct super_block *sb;
set_buffer_write_io_error(bh);
/* FIXME: do we need to set this in both places? */
if (bh->b_page && bh->b_page->mapping)
mapping_set_error(bh->b_page->mapping, -EIO);
if (bh->b_assoc_map)
mapping_set_error(bh->b_assoc_map, -EIO);
rcu_read_lock();
sb = READ_ONCE(bh->b_bdev->bd_super);
if (sb)
errseq_set(&sb->s_wb_err, -EIO);
rcu_read_unlock();
}
EXPORT_SYMBOL(mark_buffer_write_io_error);
/*
* Decrement a buffer_head's reference count. If all buffers against a page
* have zero reference count, are clean and unlocked, and if the page is clean
* and unlocked then try_to_free_buffers() may strip the buffers from the page
* in preparation for freeing it (sometimes, rarely, buffers are removed from
* a page but it ends up not being freed, and buffers may later be reattached).
*/
void __brelse(struct buffer_head * buf)
{
if (atomic_read(&buf->b_count)) {
put_bh(buf);
return;
}
WARN(1, KERN_ERR "VFS: brelse: Trying to free free buffer\n");
}
EXPORT_SYMBOL(__brelse);
/*
* bforget() is like brelse(), except it discards any
* potentially dirty data.
*/
void __bforget(struct buffer_head *bh)
{
clear_buffer_dirty(bh);
buffer_head: fix private_list handling There are two possible races in handling of private_list in buffer cache. 1) When fsync_buffers_list() processes a private_list, it clears b_assoc_mapping and moves buffer to its private list. Now drop_buffers() comes, sees a buffer is on list so it calls __remove_assoc_queue() which complains about b_assoc_mapping being cleared (as it cannot propagate possible IO error). This race has been actually observed in the wild. 2) When fsync_buffers_list() processes a private_list, mark_buffer_dirty_inode() can be called on bh which is already on the private list of fsync_buffers_list(). As buffer is on some list (note that the check is performed without private_lock), it is not readded to the mapping's private_list and after fsync_buffers_list() finishes, we have a dirty buffer which should be on private_list but it isn't. This race has not been reported, probably because most (but not all) callers of mark_buffer_dirty_inode() hold i_mutex and thus are serialized with fsync(). Fix these issues by not clearing b_assoc_map when fsync_buffers_list() moves buffer to a dedicated list and by reinserting buffer in private_list when it is found dirty after we have submitted buffer for IO. We also change the tests whether a buffer is on a private list from !list_empty(&bh->b_assoc_buffers) to bh->b_assoc_map so that they are single word reads and hence lockless checks are safe. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:59 +00:00
if (bh->b_assoc_map) {
struct address_space *buffer_mapping = bh->b_page->mapping;
spin_lock(&buffer_mapping->private_lock);
list_del_init(&bh->b_assoc_buffers);
bh->b_assoc_map = NULL;
spin_unlock(&buffer_mapping->private_lock);
}
__brelse(bh);
}
EXPORT_SYMBOL(__bforget);
static struct buffer_head *__bread_slow(struct buffer_head *bh)
{
lock_buffer(bh);
if (buffer_uptodate(bh)) {
unlock_buffer(bh);
return bh;
} else {
get_bh(bh);
bh->b_end_io = end_buffer_read_sync;
submit_bh(REQ_OP_READ, bh);
wait_on_buffer(bh);
if (buffer_uptodate(bh))
return bh;
}
brelse(bh);
return NULL;
}
/*
* Per-cpu buffer LRU implementation. To reduce the cost of __find_get_block().
* The bhs[] array is sorted - newest buffer is at bhs[0]. Buffers have their
* refcount elevated by one when they're in an LRU. A buffer can only appear
* once in a particular CPU's LRU. A single buffer can be present in multiple
* CPU's LRUs at the same time.
*
* This is a transparent caching front-end to sb_bread(), sb_getblk() and
* sb_find_get_block().
*
* The LRUs themselves only need locking against invalidate_bh_lrus. We use
* a local interrupt disable for that.
*/
#define BH_LRU_SIZE 16
struct bh_lru {
struct buffer_head *bhs[BH_LRU_SIZE];
};
static DEFINE_PER_CPU(struct bh_lru, bh_lrus) = {{ NULL }};
#ifdef CONFIG_SMP
#define bh_lru_lock() local_irq_disable()
#define bh_lru_unlock() local_irq_enable()
#else
#define bh_lru_lock() preempt_disable()
#define bh_lru_unlock() preempt_enable()
#endif
static inline void check_irqs_on(void)
{
#ifdef irqs_disabled
BUG_ON(irqs_disabled());
#endif
}
/*
* Install a buffer_head into this cpu's LRU. If not already in the LRU, it is
* inserted at the front, and the buffer_head at the back if any is evicted.
* Or, if already in the LRU it is moved to the front.
*/
static void bh_lru_install(struct buffer_head *bh)
{
struct buffer_head *evictee = bh;
struct bh_lru *b;
int i;
check_irqs_on();
bh_lru_lock();
/*
* the refcount of buffer_head in bh_lru prevents dropping the
* attached page(i.e., try_to_free_buffers) so it could cause
* failing page migration.
* Skip putting upcoming bh into bh_lru until migration is done.
*/
if (lru_cache_disabled()) {
bh_lru_unlock();
return;
}
b = this_cpu_ptr(&bh_lrus);
for (i = 0; i < BH_LRU_SIZE; i++) {
swap(evictee, b->bhs[i]);
if (evictee == bh) {
bh_lru_unlock();
return;
}
}
get_bh(bh);
bh_lru_unlock();
brelse(evictee);
}
/*
* Look up the bh in this cpu's LRU. If it's there, move it to the head.
*/
static struct buffer_head *
lookup_bh_lru(struct block_device *bdev, sector_t block, unsigned size)
{
struct buffer_head *ret = NULL;
unsigned int i;
check_irqs_on();
bh_lru_lock();
for (i = 0; i < BH_LRU_SIZE; i++) {
struct buffer_head *bh = __this_cpu_read(bh_lrus.bhs[i]);
if (bh && bh->b_blocknr == block && bh->b_bdev == bdev &&
bh->b_size == size) {
if (i) {
while (i) {
__this_cpu_write(bh_lrus.bhs[i],
__this_cpu_read(bh_lrus.bhs[i - 1]));
i--;
}
__this_cpu_write(bh_lrus.bhs[0], bh);
}
get_bh(bh);
ret = bh;
break;
}
}
bh_lru_unlock();
return ret;
}
/*
* Perform a pagecache lookup for the matching buffer. If it's there, refresh
* it in the LRU and mark it as accessed. If it is not present then return
* NULL
*/
struct buffer_head *
__find_get_block(struct block_device *bdev, sector_t block, unsigned size)
{
struct buffer_head *bh = lookup_bh_lru(bdev, block, size);
if (bh == NULL) {
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:10:31 +00:00
/* __find_get_block_slow will mark the page accessed */
bh = __find_get_block_slow(bdev, block);
if (bh)
bh_lru_install(bh);
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:10:31 +00:00
} else
touch_buffer(bh);
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:10:31 +00:00
return bh;
}
EXPORT_SYMBOL(__find_get_block);
/*
* __getblk_gfp() will locate (and, if necessary, create) the buffer_head
* which corresponds to the passed block_device, block and size. The
* returned buffer has its reference count incremented.
*
* __getblk_gfp() will lock up the machine if grow_dev_page's
* try_to_free_buffers() attempt is failing. FIXME, perhaps?
*/
struct buffer_head *
__getblk_gfp(struct block_device *bdev, sector_t block,
unsigned size, gfp_t gfp)
{
struct buffer_head *bh = __find_get_block(bdev, block, size);
might_sleep();
if (bh == NULL)
bh = __getblk_slow(bdev, block, size, gfp);
return bh;
}
EXPORT_SYMBOL(__getblk_gfp);
/*
* Do async read-ahead on a buffer..
*/
void __breadahead(struct block_device *bdev, sector_t block, unsigned size)
{
struct buffer_head *bh = __getblk(bdev, block, size);
if (likely(bh)) {
bh_readahead(bh, REQ_RAHEAD);
brelse(bh);
}
}
EXPORT_SYMBOL(__breadahead);
/**
* __bread_gfp() - reads a specified block and returns the bh
* @bdev: the block_device to read from
* @block: number of block
* @size: size (in bytes) to read
* @gfp: page allocation flag
*
* Reads a specified block, and returns buffer head that contains it.
* The page cache can be allocated from non-movable area
* not to prevent page migration if you set gfp to zero.
* It returns NULL if the block was unreadable.
*/
struct buffer_head *
__bread_gfp(struct block_device *bdev, sector_t block,
unsigned size, gfp_t gfp)
{
struct buffer_head *bh = __getblk_gfp(bdev, block, size, gfp);
if (likely(bh) && !buffer_uptodate(bh))
bh = __bread_slow(bh);
return bh;
}
EXPORT_SYMBOL(__bread_gfp);
static void __invalidate_bh_lrus(struct bh_lru *b)
{
int i;
for (i = 0; i < BH_LRU_SIZE; i++) {
brelse(b->bhs[i]);
b->bhs[i] = NULL;
}
}
/*
* invalidate_bh_lrus() is called rarely - but not only at unmount.
* This doesn't race because it runs in each cpu either in irq
* or with preempt disabled.
*/
static void invalidate_bh_lru(void *arg)
{
struct bh_lru *b = &get_cpu_var(bh_lrus);
__invalidate_bh_lrus(b);
put_cpu_var(bh_lrus);
}
bool has_bh_in_lru(int cpu, void *dummy)
{
struct bh_lru *b = per_cpu_ptr(&bh_lrus, cpu);
int i;
for (i = 0; i < BH_LRU_SIZE; i++) {
if (b->bhs[i])
return true;
}
return false;
}
void invalidate_bh_lrus(void)
{
on_each_cpu_cond(has_bh_in_lru, invalidate_bh_lru, NULL, 1);
}
rewrite rd This is a rewrite of the ramdisk block device driver. The old one is really difficult because it effectively implements a block device which serves data out of its own buffer cache. It relies on the dirty bit being set, to pin its backing store in cache, however there are non trivial paths which can clear the dirty bit (eg. try_to_free_buffers()), which had recently lead to data corruption. And in general it is completely wrong for a block device driver to do this. The new one is more like a regular block device driver. It has no idea about vm/vfs stuff. It's backing store is similar to the buffer cache (a simple radix-tree of pages), but it doesn't know anything about page cache (the pages in the radix tree are not pagecache pages). There is one slight downside -- direct block device access and filesystem metadata access goes through an extra copy and gets stored in RAM twice. However, this downside is only slight, because the real buffercache of the device is now reclaimable (because we're not playing crazy games with it), so under memory intensive situations, footprint should effectively be the same -- maybe even a slight advantage to the new driver because it can also reclaim buffer heads. The fact that it now goes through all the regular vm/fs paths makes it much more useful for testing, too. text data bss dec hex filename 2837 849 384 4070 fe6 drivers/block/rd.o 3528 371 12 3911 f47 drivers/block/brd.o Text is larger, but data and bss are smaller, making total size smaller. A few other nice things about it: - Similar structure and layout to the new loop device handlinag. - Dynamic ramdisk creation. - Runtime flexible buffer head size (because it is no longer part of the ramdisk code). - Boot / load time flexible ramdisk size, which could easily be extended to a per-ramdisk runtime changeable size (eg. with an ioctl). - Can use highmem for the backing store. [akpm@linux-foundation.org: fix build] [byron.bbradley@gmail.com: make rd_size non-static] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Byron Bradley <byron.bbradley@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:19:49 +00:00
EXPORT_SYMBOL_GPL(invalidate_bh_lrus);
/*
* It's called from workqueue context so we need a bh_lru_lock to close
* the race with preemption/irq.
*/
void invalidate_bh_lrus_cpu(void)
{
struct bh_lru *b;
bh_lru_lock();
b = this_cpu_ptr(&bh_lrus);
__invalidate_bh_lrus(b);
bh_lru_unlock();
}
void set_bh_page(struct buffer_head *bh,
struct page *page, unsigned long offset)
{
bh->b_page = page;
BUG_ON(offset >= PAGE_SIZE);
if (PageHighMem(page))
/*
* This catches illegal uses and preserves the offset:
*/
bh->b_data = (char *)(0 + offset);
else
bh->b_data = page_address(page) + offset;
}
EXPORT_SYMBOL(set_bh_page);
/*
* Called when truncating a buffer on a page completely.
*/
/* Bits that are cleared during an invalidate */
#define BUFFER_FLAGS_DISCARD \
(1 << BH_Mapped | 1 << BH_New | 1 << BH_Req | \
1 << BH_Delay | 1 << BH_Unwritten)
static void discard_buffer(struct buffer_head * bh)
{
unsigned long b_state;
lock_buffer(bh);
clear_buffer_dirty(bh);
bh->b_bdev = NULL;
b_state = READ_ONCE(bh->b_state);
do {
} while (!try_cmpxchg(&bh->b_state, &b_state,
b_state & ~BUFFER_FLAGS_DISCARD));
unlock_buffer(bh);
}
/**
* block_invalidate_folio - Invalidate part or all of a buffer-backed folio.
* @folio: The folio which is affected.
* @offset: start of the range to invalidate
* @length: length of the range to invalidate
*
* block_invalidate_folio() is called when all or part of the folio has been
* invalidated by a truncate operation.
*
* block_invalidate_folio() does not have to release all buffers, but it must
* ensure that no dirty buffer is left outside @offset and that no I/O
* is underway against any of the blocks which are outside the truncation
* point. Because the caller is about to free (and possibly reuse) those
* blocks on-disk.
*/
void block_invalidate_folio(struct folio *folio, size_t offset, size_t length)
{
struct buffer_head *head, *bh, *next;
size_t curr_off = 0;
size_t stop = length + offset;
BUG_ON(!folio_test_locked(folio));
/*
* Check for overflow
*/
BUG_ON(stop > folio_size(folio) || stop < length);
head = folio_buffers(folio);
if (!head)
return;
bh = head;
do {
size_t next_off = curr_off + bh->b_size;
next = bh->b_this_page;
/*
* Are we still fully in range ?
*/
if (next_off > stop)
goto out;
/*
* is this block fully invalidated?
*/
if (offset <= curr_off)
discard_buffer(bh);
curr_off = next_off;
bh = next;
} while (bh != head);
/*
* We release buffers only if the entire folio is being invalidated.
* The get_block cached value has been unconditionally invalidated,
* so real IO is not possible anymore.
*/
if (length == folio_size(folio))
filemap_release_folio(folio, 0);
out:
return;
}
EXPORT_SYMBOL(block_invalidate_folio);
/*
* We attach and possibly dirty the buffers atomically wrt
* block_dirty_folio() via private_lock. try_to_free_buffers
* is already excluded via the page lock.
*/
void create_empty_buffers(struct page *page,
unsigned long blocksize, unsigned long b_state)
{
struct buffer_head *bh, *head, *tail;
head = alloc_page_buffers(page, blocksize, true);
bh = head;
do {
bh->b_state |= b_state;
tail = bh;
bh = bh->b_this_page;
} while (bh);
tail->b_this_page = head;
spin_lock(&page->mapping->private_lock);
if (PageUptodate(page) || PageDirty(page)) {
bh = head;
do {
if (PageDirty(page))
set_buffer_dirty(bh);
if (PageUptodate(page))
set_buffer_uptodate(bh);
bh = bh->b_this_page;
} while (bh != head);
}
attach_page_private(page, head);
spin_unlock(&page->mapping->private_lock);
}
EXPORT_SYMBOL(create_empty_buffers);
/**
* clean_bdev_aliases: clean a range of buffers in block device
* @bdev: Block device to clean buffers in
* @block: Start of a range of blocks to clean
* @len: Number of blocks to clean
*
* We are taking a range of blocks for data and we don't want writeback of any
* buffer-cache aliases starting from return from this function and until the
* moment when something will explicitly mark the buffer dirty (hopefully that
* will not happen until we will free that block ;-) We don't even need to mark
* it not-uptodate - nobody can expect anything from a newly allocated buffer
* anyway. We used to use unmap_buffer() for such invalidation, but that was
* wrong. We definitely don't want to mark the alias unmapped, for example - it
* would confuse anyone who might pick it with bread() afterwards...
*
* Also.. Note that bforget() doesn't lock the buffer. So there can be
* writeout I/O going on against recently-freed buffers. We don't wait on that
* I/O in bforget() - it's more efficient to wait on the I/O only if we really
* need to. That happens here.
*/
void clean_bdev_aliases(struct block_device *bdev, sector_t block, sector_t len)
{
struct inode *bd_inode = bdev->bd_inode;
struct address_space *bd_mapping = bd_inode->i_mapping;
struct folio_batch fbatch;
pgoff_t index = block >> (PAGE_SHIFT - bd_inode->i_blkbits);
pgoff_t end;
int i, count;
struct buffer_head *bh;
struct buffer_head *head;
end = (block + len - 1) >> (PAGE_SHIFT - bd_inode->i_blkbits);
folio_batch_init(&fbatch);
while (filemap_get_folios(bd_mapping, &index, end, &fbatch)) {
count = folio_batch_count(&fbatch);
for (i = 0; i < count; i++) {
struct folio *folio = fbatch.folios[i];
if (!folio_buffers(folio))
continue;
/*
* We use folio lock instead of bd_mapping->private_lock
* to pin buffers here since we can afford to sleep and
* it scales better than a global spinlock lock.
*/
folio_lock(folio);
/* Recheck when the folio is locked which pins bhs */
head = folio_buffers(folio);
if (!head)
goto unlock_page;
bh = head;
do {
if (!buffer_mapped(bh) || (bh->b_blocknr < block))
goto next;
if (bh->b_blocknr >= block + len)
break;
clear_buffer_dirty(bh);
wait_on_buffer(bh);
clear_buffer_req(bh);
next:
bh = bh->b_this_page;
} while (bh != head);
unlock_page:
folio_unlock(folio);
}
folio_batch_release(&fbatch);
cond_resched();
/* End of range already reached? */
if (index > end || !index)
break;
}
}
EXPORT_SYMBOL(clean_bdev_aliases);
/*
* Size is a power-of-two in the range 512..PAGE_SIZE,
* and the case we care about most is PAGE_SIZE.
*
* So this *could* possibly be written with those
* constraints in mind (relevant mostly if some
* architecture has a slow bit-scan instruction)
*/
static inline int block_size_bits(unsigned int blocksize)
{
return ilog2(blocksize);
}
static struct buffer_head *create_page_buffers(struct page *page, struct inode *inode, unsigned int b_state)
{
BUG_ON(!PageLocked(page));
if (!page_has_buffers(page))
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 21:07:29 +00:00
create_empty_buffers(page, 1 << READ_ONCE(inode->i_blkbits),
b_state);
return page_buffers(page);
}
/*
* NOTE! All mapped/uptodate combinations are valid:
*
* Mapped Uptodate Meaning
*
* No No "unknown" - must do get_block()
* No Yes "hole" - zero-filled
* Yes No "allocated" - allocated on disk, not read in
* Yes Yes "valid" - allocated and up-to-date in memory.
*
* "Dirty" is valid only with the last case (mapped+uptodate).
*/
/*
* While block_write_full_page is writing back the dirty buffers under
* the page lock, whoever dirtied the buffers may decide to clean them
* again at any time. We handle that by only looking at the buffer
* state inside lock_buffer().
*
* If block_write_full_page() is called for regular writeback
* (wbc->sync_mode == WB_SYNC_NONE) then it will redirty a page which has a
* locked buffer. This only can happen if someone has written the buffer
* directly, with submit_bh(). At the address_space level PageWriteback
* prevents this contention from occurring.
*
* If block_write_full_page() is called with wbc->sync_mode ==
* WB_SYNC_ALL, the writes are posted using REQ_SYNC; this
* causes the writes to be flagged as synchronous writes.
*/
int __block_write_full_page(struct inode *inode, struct page *page,
get_block_t *get_block, struct writeback_control *wbc,
bh_end_io_t *handler)
{
int err;
sector_t block;
sector_t last_block;
struct buffer_head *bh, *head;
unsigned int blocksize, bbits;
int nr_underway = 0;
blk_opf_t write_flags = wbc_to_write_flags(wbc);
head = create_page_buffers(page, inode,
(1 << BH_Dirty)|(1 << BH_Uptodate));
/*
* Be very careful. We have no exclusion from block_dirty_folio
* here, and the (potentially unmapped) buffers may become dirty at
* any time. If a buffer becomes dirty here after we've inspected it
* then we just miss that fact, and the page stays dirty.
*
* Buffers outside i_size may be dirtied by block_dirty_folio;
* handle that here by just cleaning them.
*/
bh = head;
blocksize = bh->b_size;
bbits = block_size_bits(blocksize);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
block = (sector_t)page->index << (PAGE_SHIFT - bbits);
last_block = (i_size_read(inode) - 1) >> bbits;
/*
* Get all the dirty buffers mapped to disk addresses and
* handle any aliases from the underlying blockdev's mapping.
*/
do {
if (block > last_block) {
/*
* mapped buffers outside i_size will occur, because
* this page can be outside i_size when there is a
* truncate in progress.
*/
/*
* The buffer was zeroed by block_write_full_page()
*/
clear_buffer_dirty(bh);
set_buffer_uptodate(bh);
} else if ((!buffer_mapped(bh) || buffer_delay(bh)) &&
buffer_dirty(bh)) {
WARN_ON(bh->b_size != blocksize);
err = get_block(inode, block, bh, 1);
if (err)
goto recover;
clear_buffer_delay(bh);
if (buffer_new(bh)) {
/* blockdev mappings never come here */
clear_buffer_new(bh);
clean_bdev_bh_alias(bh);
}
}
bh = bh->b_this_page;
block++;
} while (bh != head);
do {
if (!buffer_mapped(bh))
continue;
/*
* If it's a fully non-blocking write attempt and we cannot
* lock the buffer then redirty the page. Note that this can
* potentially cause a busy-wait loop from writeback threads
* and kswapd activity, but those code paths have their own
* higher-level throttling.
*/
if (wbc->sync_mode != WB_SYNC_NONE) {
lock_buffer(bh);
} else if (!trylock_buffer(bh)) {
redirty_page_for_writepage(wbc, page);
continue;
}
if (test_clear_buffer_dirty(bh)) {
mark_buffer_async_write_endio(bh, handler);
} else {
unlock_buffer(bh);
}
} while ((bh = bh->b_this_page) != head);
/*
* The page and its buffers are protected by PageWriteback(), so we can
* drop the bh refcounts early.
*/
BUG_ON(PageWriteback(page));
set_page_writeback(page);
do {
struct buffer_head *next = bh->b_this_page;
if (buffer_async_write(bh)) {
submit_bh_wbc(REQ_OP_WRITE | write_flags, bh, wbc);
nr_underway++;
}
bh = next;
} while (bh != head);
unlock_page(page);
err = 0;
done:
if (nr_underway == 0) {
/*
* The page was marked dirty, but the buffers were
* clean. Someone wrote them back by hand with
* write_dirty_buffer/submit_bh. A rare case.
*/
end_page_writeback(page);
/*
* The page and buffer_heads can be released at any time from
* here on.
*/
}
return err;
recover:
/*
* ENOSPC, or some other error. We may already have added some
* blocks to the file, so we need to write these out to avoid
* exposing stale data.
* The page is currently locked and not marked for writeback
*/
bh = head;
/* Recovery: lock and submit the mapped buffers */
do {
if (buffer_mapped(bh) && buffer_dirty(bh) &&
!buffer_delay(bh)) {
lock_buffer(bh);
mark_buffer_async_write_endio(bh, handler);
} else {
/*
* The buffer may have been set dirty during
* attachment to a dirty page.
*/
clear_buffer_dirty(bh);
}
} while ((bh = bh->b_this_page) != head);
SetPageError(page);
BUG_ON(PageWriteback(page));
mapping_set_error(page->mapping, err);
set_page_writeback(page);
do {
struct buffer_head *next = bh->b_this_page;
if (buffer_async_write(bh)) {
clear_buffer_dirty(bh);
submit_bh_wbc(REQ_OP_WRITE | write_flags, bh, wbc);
nr_underway++;
}
bh = next;
} while (bh != head);
unlock_page(page);
goto done;
}
EXPORT_SYMBOL(__block_write_full_page);
/*
* If a page has any new buffers, zero them out here, and mark them uptodate
* and dirty so they'll be written out (in order to prevent uninitialised
* block data from leaking). And clear the new bit.
*/
void page_zero_new_buffers(struct page *page, unsigned from, unsigned to)
{
unsigned int block_start, block_end;
struct buffer_head *head, *bh;
BUG_ON(!PageLocked(page));
if (!page_has_buffers(page))
return;
bh = head = page_buffers(page);
block_start = 0;
do {
block_end = block_start + bh->b_size;
if (buffer_new(bh)) {
if (block_end > from && block_start < to) {
if (!PageUptodate(page)) {
unsigned start, size;
start = max(from, block_start);
size = min(to, block_end) - start;
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 06:28:29 +00:00
zero_user(page, start, size);
set_buffer_uptodate(bh);
}
clear_buffer_new(bh);
mark_buffer_dirty(bh);
}
}
block_start = block_end;
bh = bh->b_this_page;
} while (bh != head);
}
EXPORT_SYMBOL(page_zero_new_buffers);
static void
iomap_to_bh(struct inode *inode, sector_t block, struct buffer_head *bh,
const struct iomap *iomap)
{
loff_t offset = block << inode->i_blkbits;
bh->b_bdev = iomap->bdev;
/*
* Block points to offset in file we need to map, iomap contains
* the offset at which the map starts. If the map ends before the
* current block, then do not map the buffer and let the caller
* handle it.
*/
BUG_ON(offset >= iomap->offset + iomap->length);
switch (iomap->type) {
case IOMAP_HOLE:
/*
* If the buffer is not up to date or beyond the current EOF,
* we need to mark it as new to ensure sub-block zeroing is
* executed if necessary.
*/
if (!buffer_uptodate(bh) ||
(offset >= i_size_read(inode)))
set_buffer_new(bh);
break;
case IOMAP_DELALLOC:
if (!buffer_uptodate(bh) ||
(offset >= i_size_read(inode)))
set_buffer_new(bh);
set_buffer_uptodate(bh);
set_buffer_mapped(bh);
set_buffer_delay(bh);
break;
case IOMAP_UNWRITTEN:
/*
* For unwritten regions, we always need to ensure that regions
* in the block we are not writing to are zeroed. Mark the
* buffer as new to ensure this.
*/
set_buffer_new(bh);
set_buffer_unwritten(bh);
fallthrough;
case IOMAP_MAPPED:
if ((iomap->flags & IOMAP_F_NEW) ||
offset >= i_size_read(inode))
set_buffer_new(bh);
bh->b_blocknr = (iomap->addr + offset - iomap->offset) >>
inode->i_blkbits;
set_buffer_mapped(bh);
break;
}
}
int __block_write_begin_int(struct folio *folio, loff_t pos, unsigned len,
get_block_t *get_block, const struct iomap *iomap)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
unsigned from = pos & (PAGE_SIZE - 1);
unsigned to = from + len;
struct inode *inode = folio->mapping->host;
unsigned block_start, block_end;
sector_t block;
int err = 0;
unsigned blocksize, bbits;
struct buffer_head *bh, *head, *wait[2], **wait_bh=wait;
BUG_ON(!folio_test_locked(folio));
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
BUG_ON(from > PAGE_SIZE);
BUG_ON(to > PAGE_SIZE);
BUG_ON(from > to);
head = create_page_buffers(&folio->page, inode, 0);
blocksize = head->b_size;
bbits = block_size_bits(blocksize);
block = (sector_t)folio->index << (PAGE_SHIFT - bbits);
for(bh = head, block_start = 0; bh != head || !block_start;
block++, block_start=block_end, bh = bh->b_this_page) {
block_end = block_start + blocksize;
if (block_end <= from || block_start >= to) {
if (folio_test_uptodate(folio)) {
if (!buffer_uptodate(bh))
set_buffer_uptodate(bh);
}
continue;
}
if (buffer_new(bh))
clear_buffer_new(bh);
if (!buffer_mapped(bh)) {
WARN_ON(bh->b_size != blocksize);
if (get_block) {
err = get_block(inode, block, bh, 1);
if (err)
break;
} else {
iomap_to_bh(inode, block, bh, iomap);
}
if (buffer_new(bh)) {
clean_bdev_bh_alias(bh);
if (folio_test_uptodate(folio)) {
clear_buffer_new(bh);
set_buffer_uptodate(bh);
mark_buffer_dirty(bh);
continue;
}
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 06:28:29 +00:00
if (block_end > to || block_start < from)
folio_zero_segments(folio,
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 06:28:29 +00:00
to, block_end,
block_start, from);
continue;
}
}
if (folio_test_uptodate(folio)) {
if (!buffer_uptodate(bh))
set_buffer_uptodate(bh);
continue;
}
if (!buffer_uptodate(bh) && !buffer_delay(bh) &&
!buffer_unwritten(bh) &&
(block_start < from || block_end > to)) {
bh_read_nowait(bh, 0);
*wait_bh++=bh;
}
}
/*
* If we issued read requests - let them complete.
*/
while(wait_bh > wait) {
wait_on_buffer(*--wait_bh);
if (!buffer_uptodate(*wait_bh))
err = -EIO;
}
if (unlikely(err))
page_zero_new_buffers(&folio->page, from, to);
return err;
}
int __block_write_begin(struct page *page, loff_t pos, unsigned len,
get_block_t *get_block)
{
return __block_write_begin_int(page_folio(page), pos, len, get_block,
NULL);
}
EXPORT_SYMBOL(__block_write_begin);
static int __block_commit_write(struct inode *inode, struct page *page,
unsigned from, unsigned to)
{
unsigned block_start, block_end;
int partial = 0;
unsigned blocksize;
struct buffer_head *bh, *head;
bh = head = page_buffers(page);
blocksize = bh->b_size;
block_start = 0;
do {
block_end = block_start + blocksize;
if (block_end <= from || block_start >= to) {
if (!buffer_uptodate(bh))
partial = 1;
} else {
set_buffer_uptodate(bh);
mark_buffer_dirty(bh);
}
if (buffer_new(bh))
clear_buffer_new(bh);
block_start = block_end;
bh = bh->b_this_page;
} while (bh != head);
/*
* If this is a partial write which happened to make all buffers
* uptodate then we can optimize away a bogus read_folio() for
* the next read(). Here we 'discover' whether the page went
* uptodate as a result of this (potentially partial) write.
*/
if (!partial)
SetPageUptodate(page);
return 0;
}
/*
* block_write_begin takes care of the basic task of block allocation and
* bringing partial write blocks uptodate first.
*
fs: introduce new truncate sequence Introduce a new truncate calling sequence into fs/mm subsystems. Rather than setattr > vmtruncate > truncate, have filesystems call their truncate sequence from ->setattr if filesystem specific operations are required. vmtruncate is deprecated, and truncate_pagecache and inode_newsize_ok helpers introduced previously should be used. simple_setattr is introduced for simple in-ram filesystems to implement the new truncate sequence. Eventually all filesystems should be converted to implement a setattr, and the default code in notify_change should go away. simple_setsize is also introduced to perform just the ATTR_SIZE portion of simple_setattr (ie. changing i_size and trimming pagecache). To implement the new truncate sequence: - filesystem specific manipulations (eg freeing blocks) must be done in the setattr method rather than ->truncate. - vmtruncate can not be used by core code to trim blocks past i_size in the event of write failure after allocation, so this must be performed in the fs code. - convert usage of helpers block_write_begin, nobh_write_begin, cont_write_begin, and *blockdev_direct_IO* to use _newtrunc postfixed variants. These avoid calling vmtruncate to trim blocks (see previous). - inode_setattr should not be used. generic_setattr is a new function to be used to copy simple attributes into the generic inode. - make use of the better opportunity to handle errors with the new sequence. Big problem with the previous calling sequence: the filesystem is not called until i_size has already changed. This means it is not allowed to fail the call, and also it does not know what the previous i_size was. Also, generic code calling vmtruncate to truncate allocated blocks in case of error had no good way to return a meaningful error (or, for example, atomically handle block deallocation). Cc: Christoph Hellwig <hch@lst.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-26 15:05:33 +00:00
* The filesystem needs to handle block truncation upon failure.
*/
int block_write_begin(struct address_space *mapping, loff_t pos, unsigned len,
struct page **pagep, get_block_t *get_block)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
pgoff_t index = pos >> PAGE_SHIFT;
struct page *page;
int status;
page = grab_cache_page_write_begin(mapping, index);
if (!page)
return -ENOMEM;
status = __block_write_begin(page, pos, len, get_block);
if (unlikely(status)) {
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(page);
page = NULL;
}
*pagep = page;
return status;
}
EXPORT_SYMBOL(block_write_begin);
int block_write_end(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
struct inode *inode = mapping->host;
unsigned start;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
start = pos & (PAGE_SIZE - 1);
if (unlikely(copied < len)) {
/*
* The buffers that were written will now be uptodate, so
* we don't have to worry about a read_folio reading them
* and overwriting a partial write. However if we have
* encountered a short write and only partially written
* into a buffer, it will not be marked uptodate, so a
* read_folio might come in and destroy our partial write.
*
* Do the simplest thing, and just treat any short write to a
* non uptodate page as a zero-length write, and force the
* caller to redo the whole thing.
*/
if (!PageUptodate(page))
copied = 0;
page_zero_new_buffers(page, start+copied, start+len);
}
flush_dcache_page(page);
/* This could be a short (even 0-length) commit */
__block_commit_write(inode, page, start, start+copied);
return copied;
}
EXPORT_SYMBOL(block_write_end);
int generic_write_end(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
struct inode *inode = mapping->host;
loff_t old_size = inode->i_size;
bool i_size_changed = false;
copied = block_write_end(file, mapping, pos, len, copied, page, fsdata);
/*
* No need to use i_size_read() here, the i_size cannot change under us
* because we hold i_rwsem.
*
* But it's important to update i_size while still holding page lock:
* page writeout could otherwise come in and zero beyond i_size.
*/
if (pos + copied > inode->i_size) {
i_size_write(inode, pos + copied);
i_size_changed = true;
}
unlock_page(page);
put_page(page);
if (old_size < pos)
pagecache_isize_extended(inode, old_size, pos);
/*
* Don't mark the inode dirty under page lock. First, it unnecessarily
* makes the holding time of page lock longer. Second, it forces lock
* ordering of page lock and transaction start for journaling
* filesystems.
*/
if (i_size_changed)
mark_inode_dirty(inode);
return copied;
}
EXPORT_SYMBOL(generic_write_end);
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:36 +00:00
/*
* block_is_partially_uptodate checks whether buffers within a folio are
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:36 +00:00
* uptodate or not.
*
* Returns true if all buffers which correspond to the specified part
* of the folio are uptodate.
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:36 +00:00
*/
bool block_is_partially_uptodate(struct folio *folio, size_t from, size_t count)
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:36 +00:00
{
unsigned block_start, block_end, blocksize;
unsigned to;
struct buffer_head *bh, *head;
bool ret = true;
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:36 +00:00
head = folio_buffers(folio);
if (!head)
return false;
blocksize = head->b_size;
to = min_t(unsigned, folio_size(folio) - from, count);
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:36 +00:00
to = from + to;
if (from < blocksize && to > folio_size(folio) - blocksize)
return false;
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:36 +00:00
bh = head;
block_start = 0;
do {
block_end = block_start + blocksize;
if (block_end > from && block_start < to) {
if (!buffer_uptodate(bh)) {
ret = false;
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:36 +00:00
break;
}
if (block_end >= to)
break;
}
block_start = block_end;
bh = bh->b_this_page;
} while (bh != head);
return ret;
}
EXPORT_SYMBOL(block_is_partially_uptodate);
/*
* Generic "read_folio" function for block devices that have the normal
* get_block functionality. This is most of the block device filesystems.
* Reads the folio asynchronously --- the unlock_buffer() and
* set/clear_buffer_uptodate() functions propagate buffer state into the
* folio once IO has completed.
*/
int block_read_full_folio(struct folio *folio, get_block_t *get_block)
{
struct inode *inode = folio->mapping->host;
sector_t iblock, lblock;
struct buffer_head *bh, *head, *arr[MAX_BUF_PER_PAGE];
unsigned int blocksize, bbits;
int nr, i;
int fully_mapped = 1;
bool page_error = false;
VM_BUG_ON_FOLIO(folio_test_large(folio), folio);
head = create_page_buffers(&folio->page, inode, 0);
blocksize = head->b_size;
bbits = block_size_bits(blocksize);
iblock = (sector_t)folio->index << (PAGE_SHIFT - bbits);
lblock = (i_size_read(inode)+blocksize-1) >> bbits;
bh = head;
nr = 0;
i = 0;
do {
if (buffer_uptodate(bh))
continue;
if (!buffer_mapped(bh)) {
int err = 0;
fully_mapped = 0;
if (iblock < lblock) {
WARN_ON(bh->b_size != blocksize);
err = get_block(inode, iblock, bh, 0);
if (err) {
folio_set_error(folio);
page_error = true;
}
}
if (!buffer_mapped(bh)) {
folio_zero_range(folio, i * blocksize,
blocksize);
if (!err)
set_buffer_uptodate(bh);
continue;
}
/*
* get_block() might have updated the buffer
* synchronously
*/
if (buffer_uptodate(bh))
continue;
}
arr[nr++] = bh;
} while (i++, iblock++, (bh = bh->b_this_page) != head);
if (fully_mapped)
folio_set_mappedtodisk(folio);
if (!nr) {
/*
* All buffers are uptodate - we can set the folio uptodate
* as well. But not if get_block() returned an error.
*/
if (!page_error)
folio_mark_uptodate(folio);
folio_unlock(folio);
return 0;
}
/* Stage two: lock the buffers */
for (i = 0; i < nr; i++) {
bh = arr[i];
lock_buffer(bh);
mark_buffer_async_read(bh);
}
/*
* Stage 3: start the IO. Check for uptodateness
* inside the buffer lock in case another process reading
* the underlying blockdev brought it uptodate (the sct fix).
*/
for (i = 0; i < nr; i++) {
bh = arr[i];
if (buffer_uptodate(bh))
end_buffer_async_read(bh, 1);
else
submit_bh(REQ_OP_READ, bh);
}
return 0;
}
EXPORT_SYMBOL(block_read_full_folio);
/* utility function for filesystems that need to do work on expanding
* truncates. Uses filesystem pagecache writes to allow the filesystem to
* deal with the hole.
*/
int generic_cont_expand_simple(struct inode *inode, loff_t size)
{
struct address_space *mapping = inode->i_mapping;
const struct address_space_operations *aops = mapping->a_ops;
struct page *page;
mm: fs: initialize fsdata passed to write_begin/write_end interface Functions implementing the a_ops->write_end() interface accept the `void *fsdata` parameter that is supposed to be initialized by the corresponding a_ops->write_begin() (which accepts `void **fsdata`). However not all a_ops->write_begin() implementations initialize `fsdata` unconditionally, so it may get passed uninitialized to a_ops->write_end(), resulting in undefined behavior. Fix this by initializing fsdata with NULL before the call to write_begin(), rather than doing so in all possible a_ops implementations. This patch covers only the following cases found by running x86 KMSAN under syzkaller: - generic_perform_write() - cont_expand_zero() and generic_cont_expand_simple() - page_symlink() Other cases of passing uninitialized fsdata may persist in the codebase. Link: https://lkml.kernel.org/r/20220915150417.722975-43-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-15 15:04:16 +00:00
void *fsdata = NULL;
int err;
err = inode_newsize_ok(inode, size);
if (err)
goto out;
err = aops->write_begin(NULL, mapping, size, 0, &page, &fsdata);
if (err)
goto out;
err = aops->write_end(NULL, mapping, size, 0, 0, page, fsdata);
BUG_ON(err > 0);
out:
return err;
}
EXPORT_SYMBOL(generic_cont_expand_simple);
static int cont_expand_zero(struct file *file, struct address_space *mapping,
loff_t pos, loff_t *bytes)
{
struct inode *inode = mapping->host;
const struct address_space_operations *aops = mapping->a_ops;
unsigned int blocksize = i_blocksize(inode);
struct page *page;
mm: fs: initialize fsdata passed to write_begin/write_end interface Functions implementing the a_ops->write_end() interface accept the `void *fsdata` parameter that is supposed to be initialized by the corresponding a_ops->write_begin() (which accepts `void **fsdata`). However not all a_ops->write_begin() implementations initialize `fsdata` unconditionally, so it may get passed uninitialized to a_ops->write_end(), resulting in undefined behavior. Fix this by initializing fsdata with NULL before the call to write_begin(), rather than doing so in all possible a_ops implementations. This patch covers only the following cases found by running x86 KMSAN under syzkaller: - generic_perform_write() - cont_expand_zero() and generic_cont_expand_simple() - page_symlink() Other cases of passing uninitialized fsdata may persist in the codebase. Link: https://lkml.kernel.org/r/20220915150417.722975-43-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-15 15:04:16 +00:00
void *fsdata = NULL;
pgoff_t index, curidx;
loff_t curpos;
unsigned zerofrom, offset, len;
int err = 0;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
index = pos >> PAGE_SHIFT;
offset = pos & ~PAGE_MASK;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
while (index > (curidx = (curpos = *bytes)>>PAGE_SHIFT)) {
zerofrom = curpos & ~PAGE_MASK;
if (zerofrom & (blocksize-1)) {
*bytes |= (blocksize-1);
(*bytes)++;
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
len = PAGE_SIZE - zerofrom;
err = aops->write_begin(file, mapping, curpos, len,
&page, &fsdata);
if (err)
goto out;
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 06:28:29 +00:00
zero_user(page, zerofrom, len);
err = aops->write_end(file, mapping, curpos, len, len,
page, fsdata);
if (err < 0)
goto out;
BUG_ON(err != len);
err = 0;
balance_dirty_pages_ratelimited(mapping);
if (fatal_signal_pending(current)) {
err = -EINTR;
goto out;
}
}
/* page covers the boundary, find the boundary offset */
if (index == curidx) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
zerofrom = curpos & ~PAGE_MASK;
/* if we will expand the thing last block will be filled */
if (offset <= zerofrom) {
goto out;
}
if (zerofrom & (blocksize-1)) {
*bytes |= (blocksize-1);
(*bytes)++;
}
len = offset - zerofrom;
err = aops->write_begin(file, mapping, curpos, len,
&page, &fsdata);
if (err)
goto out;
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 06:28:29 +00:00
zero_user(page, zerofrom, len);
err = aops->write_end(file, mapping, curpos, len, len,
page, fsdata);
if (err < 0)
goto out;
BUG_ON(err != len);
err = 0;
}
out:
return err;
}
/*
* For moronic filesystems that do not allow holes in file.
* We may have to extend the file.
*/
int cont_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len,
struct page **pagep, void **fsdata,
get_block_t *get_block, loff_t *bytes)
{
struct inode *inode = mapping->host;
unsigned int blocksize = i_blocksize(inode);
unsigned int zerofrom;
int err;
err = cont_expand_zero(file, mapping, pos, bytes);
if (err)
return err;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
zerofrom = *bytes & ~PAGE_MASK;
if (pos+len > *bytes && zerofrom & (blocksize-1)) {
*bytes |= (blocksize-1);
(*bytes)++;
}
return block_write_begin(mapping, pos, len, pagep, get_block);
}
EXPORT_SYMBOL(cont_write_begin);
int block_commit_write(struct page *page, unsigned from, unsigned to)
{
struct inode *inode = page->mapping->host;
__block_commit_write(inode,page,from,to);
return 0;
}
EXPORT_SYMBOL(block_commit_write);
/*
* block_page_mkwrite() is not allowed to change the file size as it gets
* called from a page fault handler when a page is first dirtied. Hence we must
* be careful to check for EOF conditions here. We set the page up correctly
* for a written page which means we get ENOSPC checking when writing into
* holes and correct delalloc and unwritten extent mapping on filesystems that
* support these features.
*
* We are not allowed to take the i_mutex here so we have to play games to
* protect against truncate races as the page could now be beyond EOF. Because
fs: introduce new truncate sequence Introduce a new truncate calling sequence into fs/mm subsystems. Rather than setattr > vmtruncate > truncate, have filesystems call their truncate sequence from ->setattr if filesystem specific operations are required. vmtruncate is deprecated, and truncate_pagecache and inode_newsize_ok helpers introduced previously should be used. simple_setattr is introduced for simple in-ram filesystems to implement the new truncate sequence. Eventually all filesystems should be converted to implement a setattr, and the default code in notify_change should go away. simple_setsize is also introduced to perform just the ATTR_SIZE portion of simple_setattr (ie. changing i_size and trimming pagecache). To implement the new truncate sequence: - filesystem specific manipulations (eg freeing blocks) must be done in the setattr method rather than ->truncate. - vmtruncate can not be used by core code to trim blocks past i_size in the event of write failure after allocation, so this must be performed in the fs code. - convert usage of helpers block_write_begin, nobh_write_begin, cont_write_begin, and *blockdev_direct_IO* to use _newtrunc postfixed variants. These avoid calling vmtruncate to trim blocks (see previous). - inode_setattr should not be used. generic_setattr is a new function to be used to copy simple attributes into the generic inode. - make use of the better opportunity to handle errors with the new sequence. Big problem with the previous calling sequence: the filesystem is not called until i_size has already changed. This means it is not allowed to fail the call, and also it does not know what the previous i_size was. Also, generic code calling vmtruncate to truncate allocated blocks in case of error had no good way to return a meaningful error (or, for example, atomically handle block deallocation). Cc: Christoph Hellwig <hch@lst.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-26 15:05:33 +00:00
* truncate writes the inode size before removing pages, once we have the
* page lock we can determine safely if the page is beyond EOF. If it is not
* beyond EOF, then the page is guaranteed safe against truncation until we
* unlock the page.
*
* Direct callers of this function should protect against filesystem freezing
* using sb_start_pagefault() - sb_end_pagefault() functions.
*/
int block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
get_block_t get_block)
{
struct page *page = vmf->page;
struct inode *inode = file_inode(vma->vm_file);
unsigned long end;
loff_t size;
int ret;
lock_page(page);
size = i_size_read(inode);
if ((page->mapping != inode->i_mapping) ||
(page_offset(page) > size)) {
/* We overload EFAULT to mean page got truncated */
ret = -EFAULT;
goto out_unlock;
}
/* page is wholly or partially inside EOF */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
if (((page->index + 1) << PAGE_SHIFT) > size)
end = size & ~PAGE_MASK;
else
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
end = PAGE_SIZE;
ret = __block_write_begin(page, 0, end, get_block);
if (!ret)
ret = block_commit_write(page, 0, end);
if (unlikely(ret < 0))
goto out_unlock;
set_page_dirty(page);
mm: only enforce stable page writes if the backing device requires it Create a helper function to check if a backing device requires stable page writes and, if so, performs the necessary wait. Then, make it so that all points in the memory manager that handle making pages writable use the helper function. This should provide stable page write support to most filesystems, while eliminating unnecessary waiting for devices that don't require the feature. Before this patchset, all filesystems would block, regardless of whether or not it was necessary. ext3 would wait, but still generate occasional checksum errors. The network filesystems were left to do their own thing, so they'd wait too. After this patchset, all the disk filesystems except ext3 and btrfs will wait only if the hardware requires it. ext3 (if necessary) snapshots pages instead of blocking, and btrfs provides its own bdi so the mm will never wait. Network filesystems haven't been touched, so either they provide their own stable page guarantees or they don't block at all. The blocking behavior is back to what it was before 3.0 if you don't have a disk requiring stable page writes. Here's the result of using dbench to test latency on ext2: 3.8.0-rc3: Operation Count AvgLat MaxLat ---------------------------------------- WriteX 109347 0.028 59.817 ReadX 347180 0.004 3.391 Flush 15514 29.828 287.283 Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms 3.8.0-rc3 + patches: WriteX 105556 0.029 4.273 ReadX 335004 0.005 4.112 Flush 14982 30.540 298.634 Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms As you can see, the maximum write latency drops considerably with this patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave similarly, but see the cover letter for those results. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:42:51 +00:00
wait_for_stable_page(page);
return 0;
out_unlock:
unlock_page(page);
return ret;
}
EXPORT_SYMBOL(block_page_mkwrite);
int block_truncate_page(struct address_space *mapping,
loff_t from, get_block_t *get_block)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
pgoff_t index = from >> PAGE_SHIFT;
unsigned offset = from & (PAGE_SIZE-1);
unsigned blocksize;
[PATCH] fix possible PAGE_CACHE_SHIFT overflows We've had two instances recently of overflows when doing 64_bit_value = (32_bit_value << PAGE_CACHE_SHIFT) I did a tree-wide grep of `<<.*PAGE_CACHE_SHIFT' and this is the result. - afs_rxfs_fetch_descriptor.offset is of type off_t, which seems broken. - jfs and jffs are limited to 4GB anyway. - reiserfs map_block_for_writepage() takes an unsigned long for the block - it should take sector_t. (It'll fail for huge filesystems with blocksize<PAGE_CACHE_SIZE) - cramfs_read() needs to use sector_t (I think cramsfs is busted on large filesystems anyway) - affs is limited in file size anyway. - I generally didn't fix 32-bit overflows in directory operations. - arm's __flush_dcache_page() is peculiar. What if the page lies beyond 4G? - gss_wrap_req_priv() needs checking (snd_buf->page_base) Cc: Oleg Drokin <green@linuxhacker.ru> Cc: David Howells <dhowells@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: <reiserfs-dev@namesys.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: <linux-fsdevel@vger.kernel.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:03:05 +00:00
sector_t iblock;
unsigned length, pos;
struct inode *inode = mapping->host;
struct page *page;
struct buffer_head *bh;
int err;
blocksize = i_blocksize(inode);
length = offset & (blocksize - 1);
/* Block boundary? Nothing to do */
if (!length)
return 0;
length = blocksize - length;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
iblock = (sector_t)index << (PAGE_SHIFT - inode->i_blkbits);
page = grab_cache_page(mapping, index);
err = -ENOMEM;
if (!page)
goto out;
if (!page_has_buffers(page))
create_empty_buffers(page, blocksize, 0);
/* Find the buffer that contains "offset" */
bh = page_buffers(page);
pos = blocksize;
while (offset >= pos) {
bh = bh->b_this_page;
iblock++;
pos += blocksize;
}
err = 0;
if (!buffer_mapped(bh)) {
WARN_ON(bh->b_size != blocksize);
err = get_block(inode, iblock, bh, 0);
if (err)
goto unlock;
/* unmapped? It's a hole - nothing to do */
if (!buffer_mapped(bh))
goto unlock;
}
/* Ok, it's mapped. Make sure it's up-to-date */
if (PageUptodate(page))
set_buffer_uptodate(bh);
if (!buffer_uptodate(bh) && !buffer_delay(bh) && !buffer_unwritten(bh)) {
err = bh_read(bh, 0);
/* Uhhuh. Read error. Complain and punt. */
if (err < 0)
goto unlock;
}
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 06:28:29 +00:00
zero_user(page, offset, length);
mark_buffer_dirty(bh);
err = 0;
unlock:
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(page);
out:
return err;
}
EXPORT_SYMBOL(block_truncate_page);
/*
* The generic ->writepage function for buffer-backed address_spaces
*/
int block_write_full_page(struct page *page, get_block_t *get_block,
struct writeback_control *wbc)
{
struct inode * const inode = page->mapping->host;
loff_t i_size = i_size_read(inode);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
const pgoff_t end_index = i_size >> PAGE_SHIFT;
unsigned offset;
/* Is the page fully inside i_size? */
if (page->index < end_index)
return __block_write_full_page(inode, page, get_block, wbc,
end_buffer_async_write);
/* Is the page fully outside i_size? (truncate in progress) */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
offset = i_size & (PAGE_SIZE-1);
if (page->index >= end_index+1 || !offset) {
unlock_page(page);
return 0; /* don't care */
}
/*
* The page straddles i_size. It must be zeroed out on each and every
* writepage invocation because it may be mmapped. "A file is mapped
* in multiples of the page size. For a file that is not a multiple of
* the page size, the remaining memory is zeroed when mapped, and
* writes to that region are not written out to the file."
*/
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
zero_user_segment(page, offset, PAGE_SIZE);
return __block_write_full_page(inode, page, get_block, wbc,
end_buffer_async_write);
}
EXPORT_SYMBOL(block_write_full_page);
sector_t generic_block_bmap(struct address_space *mapping, sector_t block,
get_block_t *get_block)
{
struct inode *inode = mapping->host;
fs: generic_block_bmap(): initialize all of the fields in the temp bh KMSAN (KernelMemorySanitizer, a new error detection tool) reports the use of uninitialized memory in ext4_update_bh_state(): ================================================================== BUG: KMSAN: use of unitialized memory CPU: 3 PID: 1 Comm: swapper/0 Tainted: G B 4.8.0-rc6+ #597 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000282 ffff88003cc96f68 ffffffff81f30856 0000003000000008 ffff88003cc96f78 0000000000000096 ffffffff8169742a ffff88003cc96ff8 ffffffff812fc1fc 0000000000000008 ffff88003a1980e8 0000000100000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f30856>] dump_stack+0xa6/0xc0 lib/dump_stack.c:51 [<ffffffff812fc1fc>] kmsan_report+0x1ec/0x300 mm/kmsan/kmsan.c:? [<ffffffff812fc33b>] __msan_warning+0x2b/0x40 ??:? [< inline >] ext4_update_bh_state fs/ext4/inode.c:727 [<ffffffff8169742a>] _ext4_get_block+0x6ca/0x8a0 fs/ext4/inode.c:759 [<ffffffff81696d4c>] ext4_get_block+0x8c/0xa0 fs/ext4/inode.c:769 [<ffffffff814a2d36>] generic_block_bmap+0x246/0x2b0 fs/buffer.c:2991 [<ffffffff816ca30e>] ext4_bmap+0x5ee/0x660 fs/ext4/inode.c:3177 ... origin description: ----tmp@generic_block_bmap ================================================================== (the line numbers are relative to 4.8-rc6, but the bug persists upstream) The local |tmp| is created in generic_block_bmap() and then passed into ext4_bmap() => ext4_get_block() => _ext4_get_block() => ext4_update_bh_state(). Along the way tmp.b_page is never initialized before ext4_update_bh_state() checks its value. [ Use the approach suggested by Kees Cook of initializing the whole bh structure.] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-07-05 04:56:21 +00:00
struct buffer_head tmp = {
.b_size = i_blocksize(inode),
};
get_block(inode, block, &tmp, 0);
return tmp.b_blocknr;
}
EXPORT_SYMBOL(generic_block_bmap);
static void end_bio_bh_io_sync(struct bio *bio)
{
struct buffer_head *bh = bio->bi_private;
if (unlikely(bio_flagged(bio, BIO_QUIET)))
block: Supress Buffer I/O errors when SCSI REQ_QUIET flag set Allow the scsi request REQ_QUIET flag to be propagated to the buffer file system layer. The basic ideas is to pass the flag from the scsi request to the bio (block IO) and then to the buffer layer. The buffer layer can then suppress needless printks. This patch declutters the kernel log by removed the 40-50 (per lun) buffer io error messages seen during a boot in my multipath setup . It is a good chance any real errors will be missed in the "noise" it the logs without this patch. During boot I see blocks of messages like " __ratelimit: 211 callbacks suppressed Buffer I/O error on device sdm, logical block 5242879 Buffer I/O error on device sdm, logical block 5242879 Buffer I/O error on device sdm, logical block 5242847 Buffer I/O error on device sdm, logical block 1 Buffer I/O error on device sdm, logical block 5242878 Buffer I/O error on device sdm, logical block 5242879 Buffer I/O error on device sdm, logical block 5242879 Buffer I/O error on device sdm, logical block 5242879 Buffer I/O error on device sdm, logical block 5242879 Buffer I/O error on device sdm, logical block 5242872 " in my logs. My disk environment is multipath fiber channel using the SCSI_DH_RDAC code and multipathd. This topology includes an "active" and "ghost" path for each lun. IO's to the "ghost" path will never complete and the SCSI layer, via the scsi device handler rdac code, quick returns the IOs to theses paths and sets the REQ_QUIET scsi flag to suppress the scsi layer messages. I am wanting to extend the QUIET behavior to include the buffer file system layer to deal with these errors as well. I have been running this patch for a while now on several boxes without issue. A few runs of bonnie++ show no noticeable difference in performance in my setup. Thanks for John Stultz for the quiet_error finalization. Submitted-by: Keith Mannthey <kmannth@us.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-25 09:24:35 +00:00
set_bit(BH_Quiet, &bh->b_state);
bh->b_end_io(bh, !bio->bi_status);
bio_put(bio);
}
static void submit_bh_wbc(blk_opf_t opf, struct buffer_head *bh,
struct writeback_control *wbc)
{
const enum req_op op = opf & REQ_OP_MASK;
struct bio *bio;
BUG_ON(!buffer_locked(bh));
BUG_ON(!buffer_mapped(bh));
BUG_ON(!bh->b_end_io);
BUG_ON(buffer_delay(bh));
BUG_ON(buffer_unwritten(bh));
/*
* Only clear out a write error when rewriting
*/
if (test_set_buffer_req(bh) && (op == REQ_OP_WRITE))
clear_buffer_write_io_error(bh);
if (buffer_meta(bh))
opf |= REQ_META;
if (buffer_prio(bh))
opf |= REQ_PRIO;
bio = bio_alloc(bh->b_bdev, 1, opf, GFP_NOIO);
fscrypt_set_bio_crypt_ctx_bh(bio, bh, GFP_NOIO);
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 22:44:27 +00:00
bio->bi_iter.bi_sector = bh->b_blocknr * (bh->b_size >> 9);
bio_add_page(bio, bh->b_page, bh->b_size, bh_offset(bh));
BUG_ON(bio->bi_iter.bi_size != bh->b_size);
bio->bi_end_io = end_bio_bh_io_sync;
bio->bi_private = bh;
/* Take care of bh's that straddle the end of the device */
guard_bio_eod(bio);
if (wbc) {
wbc_init_bio(wbc, bio);
wbc_account_cgroup_owner(wbc, bh->b_page, bh->b_size);
}
submit_bio(bio);
}
void submit_bh(blk_opf_t opf, struct buffer_head *bh)
{
submit_bh_wbc(opf, bh, NULL);
}
EXPORT_SYMBOL(submit_bh);
void write_dirty_buffer(struct buffer_head *bh, blk_opf_t op_flags)
{
lock_buffer(bh);
if (!test_clear_buffer_dirty(bh)) {
unlock_buffer(bh);
return;
}
bh->b_end_io = end_buffer_write_sync;
get_bh(bh);
submit_bh(REQ_OP_WRITE | op_flags, bh);
}
EXPORT_SYMBOL(write_dirty_buffer);
/*
* For a data-integrity writeout, we need to wait upon any in-progress I/O
* and then start new I/O and then wait upon it. The caller must have a ref on
* the buffer_head.
*/
int __sync_dirty_buffer(struct buffer_head *bh, blk_opf_t op_flags)
{
WARN_ON(atomic_read(&bh->b_count) < 1);
lock_buffer(bh);
if (test_clear_buffer_dirty(bh)) {
fs: prevent BUG_ON in submit_bh_wbc() If a device is hot-removed --- for example, when a physical device is unplugged from pcie slot or a nbd device's network is shutdown --- this can result in a BUG_ON() crash in submit_bh_wbc(). This is because the when the block device dies, the buffer heads will have their Buffer_Mapped flag get cleared, leading to the crash in submit_bh_wbc. We had attempted to work around this problem in commit a17712c8 ("ext4: check superblock mapped prior to committing"). Unfortunately, it's still possible to hit the BUG_ON(!buffer_mapped(bh)) if the device dies between when the work-around check in ext4_commit_super() and when submit_bh_wbh() is finally called: Code path: ext4_commit_super judge if 'buffer_mapped(sbh)' is false, return <== commit a17712c8 lock_buffer(sbh) ... unlock_buffer(sbh) __sync_dirty_buffer(sbh,... lock_buffer(sbh) judge if 'buffer_mapped(sbh))' is false, return <== added by this patch submit_bh(...,sbh) submit_bh_wbc(...,sbh,...) [100722.966497] kernel BUG at fs/buffer.c:3095! <== BUG_ON(!buffer_mapped(bh))' in submit_bh_wbc() [100722.966503] invalid opcode: 0000 [#1] SMP [100722.966566] task: ffff8817e15a9e40 task.stack: ffffc90024744000 [100722.966574] RIP: 0010:submit_bh_wbc+0x180/0x190 [100722.966575] RSP: 0018:ffffc90024747a90 EFLAGS: 00010246 [100722.966576] RAX: 0000000000620005 RBX: ffff8818a80603a8 RCX: 0000000000000000 [100722.966576] RDX: ffff8818a80603a8 RSI: 0000000000020800 RDI: 0000000000000001 [100722.966577] RBP: ffffc90024747ac0 R08: 0000000000000000 R09: ffff88207f94170d [100722.966578] R10: 00000000000437c8 R11: 0000000000000001 R12: 0000000000020800 [100722.966578] R13: 0000000000000001 R14: 000000000bf9a438 R15: ffff88195f333000 [100722.966580] FS: 00007fa2eee27700(0000) GS:ffff88203d840000(0000) knlGS:0000000000000000 [100722.966580] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [100722.966581] CR2: 0000000000f0b008 CR3: 000000201a622003 CR4: 00000000007606e0 [100722.966582] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [100722.966583] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [100722.966583] PKRU: 55555554 [100722.966583] Call Trace: [100722.966588] __sync_dirty_buffer+0x6e/0xd0 [100722.966614] ext4_commit_super+0x1d8/0x290 [ext4] [100722.966626] __ext4_std_error+0x78/0x100 [ext4] [100722.966635] ? __ext4_journal_get_write_access+0xca/0x120 [ext4] [100722.966646] ext4_reserve_inode_write+0x58/0xb0 [ext4] [100722.966655] ? ext4_dirty_inode+0x48/0x70 [ext4] [100722.966663] ext4_mark_inode_dirty+0x53/0x1e0 [ext4] [100722.966671] ? __ext4_journal_start_sb+0x6d/0xf0 [ext4] [100722.966679] ext4_dirty_inode+0x48/0x70 [ext4] [100722.966682] __mark_inode_dirty+0x17f/0x350 [100722.966686] generic_update_time+0x87/0xd0 [100722.966687] touch_atime+0xa9/0xd0 [100722.966690] generic_file_read_iter+0xa09/0xcd0 [100722.966694] ? page_cache_tree_insert+0xb0/0xb0 [100722.966704] ext4_file_read_iter+0x4a/0x100 [ext4] [100722.966707] ? __inode_security_revalidate+0x4f/0x60 [100722.966709] __vfs_read+0xec/0x160 [100722.966711] vfs_read+0x8c/0x130 [100722.966712] SyS_pread64+0x87/0xb0 [100722.966716] do_syscall_64+0x67/0x1b0 [100722.966719] entry_SYSCALL64_slow_path+0x25/0x25 To address this, add the check of 'buffer_mapped(bh)' to __sync_dirty_buffer(). This also has the benefit of fixing this for other file systems. With this addition, we can drop the workaround in ext4_commit_supper(). [ Commit description rewritten by tytso. ] Signed-off-by: Xianting Tian <xianting_tian@126.com> Link: https://lore.kernel.org/r/1596211825-8750-1-git-send-email-xianting_tian@126.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-31 16:10:25 +00:00
/*
* The bh should be mapped, but it might not be if the
* device was hot-removed. Not much we can do but fail the I/O.
*/
if (!buffer_mapped(bh)) {
unlock_buffer(bh);
return -EIO;
}
get_bh(bh);
bh->b_end_io = end_buffer_write_sync;
submit_bh(REQ_OP_WRITE | op_flags, bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh))
return -EIO;
} else {
unlock_buffer(bh);
}
return 0;
}
EXPORT_SYMBOL(__sync_dirty_buffer);
int sync_dirty_buffer(struct buffer_head *bh)
{
return __sync_dirty_buffer(bh, REQ_SYNC);
}
EXPORT_SYMBOL(sync_dirty_buffer);
/*
* try_to_free_buffers() checks if all the buffers on this particular folio
* are unused, and releases them if so.
*
* Exclusion against try_to_free_buffers may be obtained by either
* locking the folio or by holding its mapping's private_lock.
*
* If the folio is dirty but all the buffers are clean then we need to
* be sure to mark the folio clean as well. This is because the folio
* may be against a block device, and a later reattachment of buffers
* to a dirty folio will set *all* buffers dirty. Which would corrupt
* filesystem data on the same device.
*
* The same applies to regular filesystem folios: if all the buffers are
* clean then we set the folio clean and proceed. To do that, we require
* total exclusion from block_dirty_folio(). That is obtained with
* private_lock.
*
* try_to_free_buffers() is non-blocking.
*/
static inline int buffer_busy(struct buffer_head *bh)
{
return atomic_read(&bh->b_count) |
(bh->b_state & ((1 << BH_Dirty) | (1 << BH_Lock)));
}
static bool
drop_buffers(struct folio *folio, struct buffer_head **buffers_to_free)
{
struct buffer_head *head = folio_buffers(folio);
struct buffer_head *bh;
bh = head;
do {
if (buffer_busy(bh))
goto failed;
bh = bh->b_this_page;
} while (bh != head);
do {
struct buffer_head *next = bh->b_this_page;
buffer_head: fix private_list handling There are two possible races in handling of private_list in buffer cache. 1) When fsync_buffers_list() processes a private_list, it clears b_assoc_mapping and moves buffer to its private list. Now drop_buffers() comes, sees a buffer is on list so it calls __remove_assoc_queue() which complains about b_assoc_mapping being cleared (as it cannot propagate possible IO error). This race has been actually observed in the wild. 2) When fsync_buffers_list() processes a private_list, mark_buffer_dirty_inode() can be called on bh which is already on the private list of fsync_buffers_list(). As buffer is on some list (note that the check is performed without private_lock), it is not readded to the mapping's private_list and after fsync_buffers_list() finishes, we have a dirty buffer which should be on private_list but it isn't. This race has not been reported, probably because most (but not all) callers of mark_buffer_dirty_inode() hold i_mutex and thus are serialized with fsync(). Fix these issues by not clearing b_assoc_map when fsync_buffers_list() moves buffer to a dedicated list and by reinserting buffer in private_list when it is found dirty after we have submitted buffer for IO. We also change the tests whether a buffer is on a private list from !list_empty(&bh->b_assoc_buffers) to bh->b_assoc_map so that they are single word reads and hence lockless checks are safe. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 12:21:59 +00:00
if (bh->b_assoc_map)
__remove_assoc_queue(bh);
bh = next;
} while (bh != head);
*buffers_to_free = head;
folio_detach_private(folio);
return true;
failed:
return false;
}
bool try_to_free_buffers(struct folio *folio)
{
struct address_space * const mapping = folio->mapping;
struct buffer_head *buffers_to_free = NULL;
bool ret = 0;
BUG_ON(!folio_test_locked(folio));
if (folio_test_writeback(folio))
return false;
if (mapping == NULL) { /* can this still happen? */
ret = drop_buffers(folio, &buffers_to_free);
goto out;
}
spin_lock(&mapping->private_lock);
ret = drop_buffers(folio, &buffers_to_free);
/*
* If the filesystem writes its buffers by hand (eg ext3)
* then we can have clean buffers against a dirty folio. We
* clean the folio here; otherwise the VM will never notice
* that the filesystem did any IO at all.
*
* Also, during truncate, discard_buffer will have marked all
* the folio's buffers clean. We discover that here and clean
* the folio also.
*
* private_lock must be held over this entire operation in order
* to synchronise against block_dirty_folio and prevent the
* dirty bit from being lost.
*/
if (ret)
folio_cancel_dirty(folio);
spin_unlock(&mapping->private_lock);
out:
if (buffers_to_free) {
struct buffer_head *bh = buffers_to_free;
do {
struct buffer_head *next = bh->b_this_page;
free_buffer_head(bh);
bh = next;
} while (bh != buffers_to_free);
}
return ret;
}
EXPORT_SYMBOL(try_to_free_buffers);
/*
* Buffer-head allocation
*/
static struct kmem_cache *bh_cachep __read_mostly;
/*
* Once the number of bh's in the machine exceeds this level, we start
* stripping them in writeback.
*/
static unsigned long max_buffer_heads;
int buffer_heads_over_limit;
struct bh_accounting {
int nr; /* Number of live bh's */
int ratelimit; /* Limit cacheline bouncing */
};
static DEFINE_PER_CPU(struct bh_accounting, bh_accounting) = {0, 0};
static void recalc_bh_state(void)
{
int i;
int tot = 0;
if (__this_cpu_inc_return(bh_accounting.ratelimit) - 1 < 4096)
return;
__this_cpu_write(bh_accounting.ratelimit, 0);
for_each_online_cpu(i)
tot += per_cpu(bh_accounting, i).nr;
buffer_heads_over_limit = (tot > max_buffer_heads);
}
struct buffer_head *alloc_buffer_head(gfp_t gfp_flags)
{
struct buffer_head *ret = kmem_cache_zalloc(bh_cachep, gfp_flags);
if (ret) {
INIT_LIST_HEAD(&ret->b_assoc_buffers);
spin_lock_init(&ret->b_uptodate_lock);
preempt_disable();
__this_cpu_inc(bh_accounting.nr);
recalc_bh_state();
preempt_enable();
}
return ret;
}
EXPORT_SYMBOL(alloc_buffer_head);
void free_buffer_head(struct buffer_head *bh)
{
BUG_ON(!list_empty(&bh->b_assoc_buffers));
kmem_cache_free(bh_cachep, bh);
preempt_disable();
__this_cpu_dec(bh_accounting.nr);
recalc_bh_state();
preempt_enable();
}
EXPORT_SYMBOL(free_buffer_head);
static int buffer_exit_cpu_dead(unsigned int cpu)
{
int i;
struct bh_lru *b = &per_cpu(bh_lrus, cpu);
for (i = 0; i < BH_LRU_SIZE; i++) {
brelse(b->bhs[i]);
b->bhs[i] = NULL;
}
this_cpu_add(bh_accounting.nr, per_cpu(bh_accounting, cpu).nr);
per_cpu(bh_accounting, cpu).nr = 0;
return 0;
}
/**
fs: fix kernel-doc notation warnings Fix kernel-doc notation warnings in fs/. Warning(mmotm-2008-0314-1449//fs/super.c:560): missing initial short description on line: * mark_files_ro Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line: * lease_get_mtime Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line: * lease_get_mtime Warning(mmotm-2008-0314-1449//fs/namei.c:1368): missing initial short description on line: * lookup_one_len: filesystem helper to lookup single pathname component Warning(mmotm-2008-0314-1449//fs/buffer.c:3221): missing initial short description on line: * bh_uptodate_or_lock: Test whether the buffer is uptodate Warning(mmotm-2008-0314-1449//fs/buffer.c:3240): missing initial short description on line: * bh_submit_read: Submit a locked buffer for reading Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:30): missing initial short description on line: * writeback_acquire: attempt to get exclusive writeback access to a device Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:47): missing initial short description on line: * writeback_in_progress: determine whether there is writeback in progress Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:58): missing initial short description on line: * writeback_release: relinquish exclusive writeback access against a device. Warning(mmotm-2008-0314-1449//include/linux/jbd.h:351): contents before sections Warning(mmotm-2008-0314-1449//include/linux/jbd.h:561): contents before sections Warning(mmotm-2008-0314-1449//fs/jbd/transaction.c:1935): missing initial short description on line: * void journal_invalidatepage() Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-20 00:01:00 +00:00
* bh_uptodate_or_lock - Test whether the buffer is uptodate
* @bh: struct buffer_head
*
* Return true if the buffer is up-to-date and false,
* with the buffer locked, if not.
*/
int bh_uptodate_or_lock(struct buffer_head *bh)
{
if (!buffer_uptodate(bh)) {
lock_buffer(bh);
if (!buffer_uptodate(bh))
return 0;
unlock_buffer(bh);
}
return 1;
}
EXPORT_SYMBOL(bh_uptodate_or_lock);
/**
* __bh_read - Submit read for a locked buffer
* @bh: struct buffer_head
* @op_flags: appending REQ_OP_* flags besides REQ_OP_READ
* @wait: wait until reading finish
*
* Returns zero on success or don't wait, and -EIO on error.
*/
int __bh_read(struct buffer_head *bh, blk_opf_t op_flags, bool wait)
{
int ret = 0;
BUG_ON(!buffer_locked(bh));
get_bh(bh);
bh->b_end_io = end_buffer_read_sync;
submit_bh(REQ_OP_READ | op_flags, bh);
if (wait) {
wait_on_buffer(bh);
if (!buffer_uptodate(bh))
ret = -EIO;
}
return ret;
}
EXPORT_SYMBOL(__bh_read);
/**
* __bh_read_batch - Submit read for a batch of unlocked buffers
* @nr: entry number of the buffer batch
* @bhs: a batch of struct buffer_head
* @op_flags: appending REQ_OP_* flags besides REQ_OP_READ
* @force_lock: force to get a lock on the buffer if set, otherwise drops any
* buffer that cannot lock.
*
* Returns zero on success or don't wait, and -EIO on error.
*/
void __bh_read_batch(int nr, struct buffer_head *bhs[],
blk_opf_t op_flags, bool force_lock)
{
int i;
for (i = 0; i < nr; i++) {
struct buffer_head *bh = bhs[i];
if (buffer_uptodate(bh))
continue;
if (force_lock)
lock_buffer(bh);
else
if (!trylock_buffer(bh))
continue;
if (buffer_uptodate(bh)) {
unlock_buffer(bh);
continue;
}
bh->b_end_io = end_buffer_read_sync;
get_bh(bh);
submit_bh(REQ_OP_READ | op_flags, bh);
}
}
EXPORT_SYMBOL(__bh_read_batch);
void __init buffer_init(void)
{
unsigned long nrpages;
int ret;
bh_cachep = kmem_cache_create("buffer_head",
sizeof(struct buffer_head), 0,
(SLAB_RECLAIM_ACCOUNT|SLAB_PANIC|
SLAB_MEM_SPREAD),
NULL);
/*
* Limit the bh occupancy to 10% of ZONE_NORMAL
*/
nrpages = (nr_free_buffer_pages() * 10) / 100;
max_buffer_heads = nrpages * (PAGE_SIZE / sizeof(struct buffer_head));
ret = cpuhp_setup_state_nocalls(CPUHP_FS_BUFF_DEAD, "fs/buffer:dead",
NULL, buffer_exit_cpu_dead);
WARN_ON(ret < 0);
}