linux/kernel/module/main.c

3387 lines
86 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2002 Richard Henderson
* Copyright (C) 2001 Rusty Russell, 2002, 2010 Rusty Russell IBM.
module: add sanity check for ELF module section The ELF ".gnu.linkonce.this_module" section is special, it is what we use to construct the struct module __this_module, which THIS_MODULE points to. When userspace loads a module we always deal first with a copy of the userspace buffer, and twiddle with the userspace copy's version of the struct module. Eventually we allocate memory to do a memcpy() of that struct module, under the assumption that the module size is right. But we have no validity checks against the size or the requirements for the section. Add some validity checks for the special module section early and while at it, cache the module section index early, so we don't have to do that later. While at it, just move over the assigment of the info->mod to make the code clearer. The validity checker also adds an explicit size check to ensure the module section size matches the kernel's run time size for sizeof(struct module). This should prevent sloppy loads of modules which are built today *without* actually increasing the size of the struct module. A developer today can for example expand the size of struct module, rebuild a directoroy 'make fs/xfs/' for example and then try to insmode the driver there. That module would in effect have an incorrect size. This new size check would put a stop gap against such mistakes. This also makes the entire goal of ".gnu.linkonce.this_module" pretty clear. Before this patch verification of the goal / intent required some Indian Jones whips, torches and cleaning up big old spider webs. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-19 21:35:38 +00:00
* Copyright (C) 2023 Luis Chamberlain <mcgrof@kernel.org>
*/
#define INCLUDE_VERMAGIC
#include <linux/export.h>
#include <linux/extable.h>
#include <linux/moduleloader.h>
#include <linux/module_signature.h>
#include <linux/trace_events.h>
#include <linux/init.h>
#include <linux/kallsyms.h>
module: add printk formats to add module build ID to stacktraces Let's make kernel stacktraces easier to identify by including the build ID[1] of a module if the stacktrace is printing a symbol from a module. This makes it simpler for developers to locate a kernel module's full debuginfo for a particular stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the matching debuginfo from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace that match the module. This is especially useful for pstore crash debugging where the kernel crashes are recorded in something like console-ramoops and the recovery kernel/modules are different or the debuginfo doesn't exist on the device due to space concerns (the debuginfo can be too large for space limited devices). Originally, I put this on the %pS format, but that was quickly rejected given that %pS is used in other places such as ftrace where build IDs aren't meaningful. There was some discussions on the list to put every module build ID into the "Modules linked in:" section of the stacktrace message but that quickly becomes very hard to read once you have more than three or four modules linked in. It also provides too much information when we don't expect each module to be traversed in a stacktrace. Having the build ID for modules that aren't important just makes things messy. Splitting it to multiple lines for each module quickly explodes the number of lines printed in an oops too, possibly wrapping the warning off the console. And finally, trying to stash away each module used in a callstack to provide the ID of each symbol printed is cumbersome and would require changes to each architecture to stash away modules and return their build IDs once unwinding has completed. Instead, we opt for the simpler approach of introducing new printk formats '%pS[R]b' for "pointer symbolic backtrace with module build ID" and '%pBb' for "pointer backtrace with module build ID" and then updating the few places in the architecture layer where the stacktrace is printed to use this new format. Before: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm] direct_entry+0x16c/0x1b4 [lkdtm] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 After: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] direct_entry+0x16c/0x1b4 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 [akpm@linux-foundation.org: fix build with CONFIG_MODULES=n, tweak code layout] [rdunlap@infradead.org: fix build when CONFIG_MODULES is not set] Link: https://lkml.kernel.org/r/20210513171510.20328-1-rdunlap@infradead.org [akpm@linux-foundation.org: make kallsyms_lookup_buildid() static] [cuibixuan@huawei.com: fix build error when CONFIG_SYSFS is disabled] Link: https://lkml.kernel.org/r/20210525105049.34804-1-cuibixuan@huawei.com Link: https://lkml.kernel.org/r/20210511003845.2429846-6-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 01:09:20 +00:00
#include <linux/buildid.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/kernel_read_file.h>
#include <linux/kstrtox.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/elf.h>
#include <linux/seq_file.h>
#include <linux/syscalls.h>
#include <linux/fcntl.h>
#include <linux/rcupdate.h>
#include <linux/capability.h>
#include <linux/cpu.h>
#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/vermagic.h>
#include <linux/notifier.h>
#include <linux/sched.h>
#include <linux/device.h>
[PATCH] modules: add version and srcversion to sysfs This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 05:05:15 +00:00
#include <linux/string.h>
#include <linux/mutex.h>
#include <linux/rculist.h>
#include <linux/uaccess.h>
#include <asm/cacheflush.h>
#include <linux/set_memory.h>
#include <asm/mmu_context.h>
#include <linux/license.h>
#include <asm/sections.h>
tracing: Kernel Tracepoints Implementation of kernel tracepoints. Inspired from the Linux Kernel Markers. Allows complete typing verification by declaring both tracing statement inline functions and probe registration/unregistration static inline functions within the same macro "DEFINE_TRACE". No format string is required. See the tracepoint Documentation and Samples patches for usage examples. Taken from the documentation patch : "A tracepoint placed in code provides a hook to call a function (probe) that you can provide at runtime. A tracepoint can be "on" (a probe is connected to it) or "off" (no probe is attached). When a tracepoint is "off" it has no effect, except for adding a tiny time penalty (checking a condition for a branch) and space penalty (adding a few bytes for the function call at the end of the instrumented function and adds a data structure in a separate section). When a tracepoint is "on", the function you provide is called each time the tracepoint is executed, in the execution context of the caller. When the function provided ends its execution, it returns to the caller (continuing from the tracepoint site). You can put tracepoints at important locations in the code. They are lightweight hooks that can pass an arbitrary number of parameters, which prototypes are described in a tracepoint declaration placed in a header file." Addition and removal of tracepoints is synchronized by RCU using the scheduler (and preempt_disable) as guarantees to find a quiescent state (this is really RCU "classic"). The update side uses rcu_barrier_sched() with call_rcu_sched() and the read/execute side uses "preempt_disable()/preempt_enable()". We make sure the previous array containing probes, which has been scheduled for deletion by the rcu callback, is indeed freed before we proceed to the next update. It therefore limits the rate of modification of a single tracepoint to one update per RCU period. The objective here is to permit fast batch add/removal of probes on _different_ tracepoints. Changelog : - Use #name ":" #proto as string to identify the tracepoint in the tracepoint table. This will make sure not type mismatch happens due to connexion of a probe with the wrong type to a tracepoint declared with the same name in a different header. - Add tracepoint_entry_free_old. - Change __TO_TRACE to get rid of the 'i' iterator. Masami Hiramatsu <mhiramat@redhat.com> : Tested on x86-64. Performance impact of a tracepoint : same as markers, except that it adds about 70 bytes of instructions in an unlikely branch of each instrumented function (the for loop, the stack setup and the function call). It currently adds a memory read, a test and a conditional branch at the instrumentation site (in the hot path). Immediate values will eventually change this into a load immediate, test and branch, which removes the memory read which will make the i-cache impact smaller (changing the memory read for a load immediate removes 3-4 bytes per site on x86_32 (depending on mov prefixes), or 7-8 bytes on x86_64, it also saves the d-cache hit). About the performance impact of tracepoints (which is comparable to markers), even without immediate values optimizations, tests done by Hideo Aoki on ia64 show no regression. His test case was using hackbench on a kernel where scheduler instrumentation (about 5 events in code scheduler code) was added. Quoting Hideo Aoki about Markers : I evaluated overhead of kernel marker using linux-2.6-sched-fixes git tree, which includes several markers for LTTng, using an ia64 server. While the immediate trace mark feature isn't implemented on ia64, there is no major performance regression. So, I think that we don't have any issues to propose merging marker point patches into Linus's tree from the viewpoint of performance impact. I prepared two kernels to evaluate. The first one was compiled without CONFIG_MARKERS. The second one was enabled CONFIG_MARKERS. I downloaded the original hackbench from the following URL: http://devresources.linux-foundation.org/craiger/hackbench/src/hackbench.c I ran hackbench 5 times in each condition and calculated the average and difference between the kernels. The parameter of hackbench: every 50 from 50 to 800 The number of CPUs of the server: 2, 4, and 8 Below is the results. As you can see, major performance regression wasn't found in any case. Even if number of processes increases, differences between marker-enabled kernel and marker- disabled kernel doesn't increase. Moreover, if number of CPUs increases, the differences doesn't increase either. Curiously, marker-enabled kernel is better than marker-disabled kernel in more than half cases, although I guess it comes from the difference of memory access pattern. * 2 CPUs Number of | without | with | diff | diff | processes | Marker [Sec] | Marker [Sec] | [Sec] | [%] | -------------------------------------------------------------- 50 | 4.811 | 4.872 | +0.061 | +1.27 | 100 | 9.854 | 10.309 | +0.454 | +4.61 | 150 | 15.602 | 15.040 | -0.562 | -3.6 | 200 | 20.489 | 20.380 | -0.109 | -0.53 | 250 | 25.798 | 25.652 | -0.146 | -0.56 | 300 | 31.260 | 30.797 | -0.463 | -1.48 | 350 | 36.121 | 35.770 | -0.351 | -0.97 | 400 | 42.288 | 42.102 | -0.186 | -0.44 | 450 | 47.778 | 47.253 | -0.526 | -1.1 | 500 | 51.953 | 52.278 | +0.325 | +0.63 | 550 | 58.401 | 57.700 | -0.701 | -1.2 | 600 | 63.334 | 63.222 | -0.112 | -0.18 | 650 | 68.816 | 68.511 | -0.306 | -0.44 | 700 | 74.667 | 74.088 | -0.579 | -0.78 | 750 | 78.612 | 79.582 | +0.970 | +1.23 | 800 | 85.431 | 85.263 | -0.168 | -0.2 | -------------------------------------------------------------- * 4 CPUs Number of | without | with | diff | diff | processes | Marker [Sec] | Marker [Sec] | [Sec] | [%] | -------------------------------------------------------------- 50 | 2.586 | 2.584 | -0.003 | -0.1 | 100 | 5.254 | 5.283 | +0.030 | +0.56 | 150 | 8.012 | 8.074 | +0.061 | +0.76 | 200 | 11.172 | 11.000 | -0.172 | -1.54 | 250 | 13.917 | 14.036 | +0.119 | +0.86 | 300 | 16.905 | 16.543 | -0.362 | -2.14 | 350 | 19.901 | 20.036 | +0.135 | +0.68 | 400 | 22.908 | 23.094 | +0.186 | +0.81 | 450 | 26.273 | 26.101 | -0.172 | -0.66 | 500 | 29.554 | 29.092 | -0.461 | -1.56 | 550 | 32.377 | 32.274 | -0.103 | -0.32 | 600 | 35.855 | 35.322 | -0.533 | -1.49 | 650 | 39.192 | 38.388 | -0.804 | -2.05 | 700 | 41.744 | 41.719 | -0.025 | -0.06 | 750 | 45.016 | 44.496 | -0.520 | -1.16 | 800 | 48.212 | 47.603 | -0.609 | -1.26 | -------------------------------------------------------------- * 8 CPUs Number of | without | with | diff | diff | processes | Marker [Sec] | Marker [Sec] | [Sec] | [%] | -------------------------------------------------------------- 50 | 2.094 | 2.072 | -0.022 | -1.07 | 100 | 4.162 | 4.273 | +0.111 | +2.66 | 150 | 6.485 | 6.540 | +0.055 | +0.84 | 200 | 8.556 | 8.478 | -0.078 | -0.91 | 250 | 10.458 | 10.258 | -0.200 | -1.91 | 300 | 12.425 | 12.750 | +0.325 | +2.62 | 350 | 14.807 | 14.839 | +0.032 | +0.22 | 400 | 16.801 | 16.959 | +0.158 | +0.94 | 450 | 19.478 | 19.009 | -0.470 | -2.41 | 500 | 21.296 | 21.504 | +0.208 | +0.98 | 550 | 23.842 | 23.979 | +0.137 | +0.57 | 600 | 26.309 | 26.111 | -0.198 | -0.75 | 650 | 28.705 | 28.446 | -0.259 | -0.9 | 700 | 31.233 | 31.394 | +0.161 | +0.52 | 750 | 34.064 | 33.720 | -0.344 | -1.01 | 800 | 36.320 | 36.114 | -0.206 | -0.57 | -------------------------------------------------------------- Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: 'Peter Zijlstra' <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 16:16:16 +00:00
#include <linux/tracepoint.h>
#include <linux/ftrace.h>
#include <linux/livepatch.h>
#include <linux/async.h>
#include <linux/percpu.h>
#include <linux/kmemleak.h>
#include <linux/jump_label.h>
x86: Add RO/NX protection for loadable kernel modules This patch is a logical extension of the protection provided by CONFIG_DEBUG_RODATA to LKMs. The protection is provided by splitting module_core and module_init into three logical parts each and setting appropriate page access permissions for each individual section: 1. Code: RO+X 2. RO data: RO+NX 3. RW data: RW+NX In order to achieve proper protection, layout_sections() have been modified to align each of the three parts mentioned above onto page boundary. Next, the corresponding page access permissions are set right before successful exit from load_module(). Further, free_module() and sys_init_module have been modified to set module_core and module_init as RW+NX right before calling module_free(). By default, the original section layout and access flags are preserved. When compiled with CONFIG_DEBUG_SET_MODULE_RONX=y, the patch will page-align each group of sections to ensure that each page contains only one type of content and will enforce RO/NX for each group of pages. -v1: Initial proof-of-concept patch. -v2: The patch have been re-written to reduce the number of #ifdefs and to make it architecture-agnostic. Code formatting has also been corrected. -v3: Opportunistic RO/NX protection is now unconditional. Section page-alignment is enabled when CONFIG_DEBUG_RODATA=y. -v4: Removed most macros and improved coding style. -v5: Changed page-alignment and RO/NX section size calculation -v6: Fixed comments. Restricted RO/NX enforcement to x86 only -v7: Introduced CONFIG_DEBUG_SET_MODULE_RONX, added calls to set_all_modules_text_rw() and set_all_modules_text_ro() in ftrace -v8: updated for compatibility with linux 2.6.33-rc5 -v9: coding style fixes -v10: more coding style fixes -v11: minor adjustments for -tip -v12: minor adjustments for v2.6.35-rc2-tip -v13: minor adjustments for v2.6.37-rc1-tip Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com> Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <ak@muc.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dave Jones <davej@redhat.com> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4CE2F914.9070106@free.fr> [ minor cleanliness edits, -v14: build failure fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-16 21:35:16 +00:00
#include <linux/pfn.h>
#include <linux/bsearch.h>
#include <linux/dynamic_debug.h>
#include <linux/audit.h>
#include <linux/cfi.h>
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
#include <linux/debugfs.h>
#include <uapi/linux/module.h>
#include "internal.h"
tracing/events: Add module tracepoints Add trace points to trace module_load, module_free, module_get, module_put and module_request, and use trace_event facility to get the trace output. Here's the sample output: TASK-PID CPU# TIMESTAMP FUNCTION | | | | | <...>-42 [000] 1.758380: module_request: fb0 wait=1 call_site=fb_open ... <...>-60 [000] 3.269403: module_load: scsi_wait_scan <...>-60 [000] 3.269432: module_put: scsi_wait_scan call_site=sys_init_module refcnt=0 <...>-61 [001] 3.273168: module_free: scsi_wait_scan ... <...>-1021 [000] 13.836081: module_load: sunrpc <...>-1021 [000] 13.840589: module_put: sunrpc call_site=sys_init_module refcnt=-1 <...>-1027 [000] 13.848098: module_get: sunrpc call_site=try_module_get refcnt=0 <...>-1027 [000] 13.848308: module_get: sunrpc call_site=get_filesystem refcnt=1 <...>-1027 [000] 13.848692: module_put: sunrpc call_site=put_filesystem refcnt=0 ... modprobe-2587 [001] 1088.437213: module_load: trace_events_sample F modprobe-2587 [001] 1088.437786: module_put: trace_events_sample call_site=sys_init_module refcnt=0 Note: - the taints flag can be 'F', 'C' and/or 'P' if mod->taints != 0 - the module refcnt is percpu, so it can be negative in a specific cpu Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <4A891B3C.5030608@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 08:56:28 +00:00
#define CREATE_TRACE_POINTS
#include <trace/events/module.h>
/*
* Mutex protects:
* 1) List of modules (also safely readable with preempt_disable),
* 2) module_use links,
* 3) mod_tree.addr_min/mod_tree.addr_max.
* (delete and add uses RCU list operations).
*/
DEFINE_MUTEX(module_mutex);
LIST_HEAD(modules);
/* Work queue for freeing init sections in success case */
module: statically initialize init section freeing data Corentin hit the following workqueue warning when running with CRYPTO_MANAGER_EXTRA_TESTS: WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0 Modules linked in: ghash_generic CPU: 2 PID: 147 Comm: modprobe Not tainted 5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty #545 Hardware name: Pine H64 model A (DT) pc : __queue_work+0x3b8/0x3d0 Call trace: __queue_work+0x3b8/0x3d0 queue_work_on+0x6c/0x90 do_init_module+0x188/0x1f0 load_module+0x1d00/0x22b0 I wasn't able to reproduce on x86 or rpi 3b+. This is WARN_ON(!list_empty(&work->entry)) from __queue_work(), and it happens because the init_free_wq work item isn't initialized in time for a crypto test that requests the gcm module. Some crypto tests were recently moved earlier in boot as explained in commit c4741b230597 ("crypto: run initcalls for generic implementations earlier"), which went into mainline less than two weeks before the Fixes commit. Avoid the warning by statically initializing init_free_wq and the corresponding llist. Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/ Fixes: 1a7b7d922081 ("modules: Use vmalloc special flag") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-on: sun50i-h6-pine-h64 Tested-on: imx8mn-ddr4-evk Tested-on: sun50i-a64-bananapi-m64 Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-10-08 17:32:20 +00:00
static void do_free_init(struct work_struct *w);
static DECLARE_WORK(init_free_wq, do_free_init);
static LLIST_HEAD(init_free_list);
struct mod_tree_root mod_tree __cacheline_aligned = {
.addr_min = -1UL,
};
struct symsearch {
const struct kernel_symbol *start, *stop;
const s32 *crcs;
enum mod_license license;
};
/*
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
* Bounds of module memory, for speeding up __module_address.
* Protected by module_mutex.
*/
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
static void __mod_update_bounds(enum mod_mem_type type __maybe_unused, void *base,
unsigned int size, struct mod_tree_root *tree)
{
unsigned long min = (unsigned long)base;
unsigned long max = min + size;
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
#ifdef CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
if (mod_mem_type_is_core_data(type)) {
if (min < tree->data_addr_min)
tree->data_addr_min = min;
if (max > tree->data_addr_max)
tree->data_addr_max = max;
return;
}
#endif
if (min < tree->addr_min)
tree->addr_min = min;
if (max > tree->addr_max)
tree->addr_max = max;
}
static void mod_update_bounds(struct module *mod)
{
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
for_each_mod_mem_type(type) {
struct module_memory *mod_mem = &mod->mem[type];
if (mod_mem->size)
__mod_update_bounds(type, mod_mem->base, mod_mem->size, &mod_tree);
}
}
/* Block module loading/unloading? */
int modules_disabled;
core_param(nomodule, modules_disabled, bint, 0);
/* Waiting for a module to finish initializing? */
static DECLARE_WAIT_QUEUE_HEAD(module_wq);
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
static BLOCKING_NOTIFIER_HEAD(module_notify_list);
int register_module_notifier(struct notifier_block *nb)
{
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
return blocking_notifier_chain_register(&module_notify_list, nb);
}
EXPORT_SYMBOL(register_module_notifier);
int unregister_module_notifier(struct notifier_block *nb)
{
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
return blocking_notifier_chain_unregister(&module_notify_list, nb);
}
EXPORT_SYMBOL(unregister_module_notifier);
/*
* We require a truly strong try_module_get(): 0 means success.
* Otherwise an error is returned due to ongoing or failed
* initialization etc.
*/
static inline int strong_try_module_get(struct module *mod)
{
BUG_ON(mod && mod->state == MODULE_STATE_UNFORMED);
if (mod && mod->state == MODULE_STATE_COMING)
return -EBUSY;
if (try_module_get(mod))
return 0;
else
return -ENOENT;
}
static inline void add_taint_module(struct module *mod, unsigned flag,
enum lockdep_ok lockdep_ok)
{
add_taint(flag, lockdep_ok);
taint/module: Clean up global and module taint flags handling The commit 66cc69e34e86a231 ("Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE") updated module_taint_flags() to potentially print one more character. But it did not increase the size of the corresponding buffers in m_show() and print_modules(). We have recently done the same mistake when adding a taint flag for livepatching, see https://lkml.kernel.org/r/cfba2c823bb984690b73572aaae1db596b54a082.1472137475.git.jpoimboe@redhat.com Also struct module uses an incompatible type for mod-taints flags. It survived from the commit 2bc2d61a9638dab670d ("[PATCH] list module taint flags in Oops/panic"). There was used "int" for the global taint flags at these times. But only the global tain flags was later changed to "unsigned long" by the commit 25ddbb18aae33ad2 ("Make the taint flags reliable"). This patch defines TAINT_FLAGS_COUNT that can be used to create arrays and buffers of the right size. Note that we could not use enum because the taint flag indexes are used also in assembly code. Then it reworks the table that describes the taint flags. The TAINT_* numbers can be used as the index. Instead, we add information if the taint flag is also shown per-module. Finally, it uses "unsigned long", bit operations, and the updated taint_flags table also for mod->taints. It is not optimal because only few taint flags can be printed by module_taint_flags(). But better be on the safe side. IMHO, it is not worth the optimization and this is a good compromise. Signed-off-by: Petr Mladek <pmladek@suse.com> Link: http://lkml.kernel.org/r/1474458442-21581-1-git-send-email-pmladek@suse.com [jeyu@redhat.com: fix broken lkml link in changelog] Signed-off-by: Jessica Yu <jeyu@redhat.com>
2016-09-21 11:47:22 +00:00
set_bit(flag, &mod->taints);
}
/*
* A thread that wants to hold a reference to a module only while it
* is running can call this to safely exit.
*/
void __noreturn __module_put_and_kthread_exit(struct module *mod, long code)
{
module_put(mod);
kthread_exit(code);
}
EXPORT_SYMBOL(__module_put_and_kthread_exit);
/* Find a module section: 0 means not found. */
static unsigned int find_sec(const struct load_info *info, const char *name)
{
unsigned int i;
for (i = 1; i < info->hdr->e_shnum; i++) {
Elf_Shdr *shdr = &info->sechdrs[i];
/* Alloc bit cleared means "ignore it." */
if ((shdr->sh_flags & SHF_ALLOC)
&& strcmp(info->secstrings + shdr->sh_name, name) == 0)
return i;
}
return 0;
}
/* Find a module section, or NULL. */
static void *section_addr(const struct load_info *info, const char *name)
{
/* Section 0 has sh_addr 0. */
return (void *)info->sechdrs[find_sec(info, name)].sh_addr;
}
/* Find a module section, or NULL. Fill in number of "objects" in section. */
static void *section_objs(const struct load_info *info,
const char *name,
size_t object_size,
unsigned int *num)
{
unsigned int sec = find_sec(info, name);
/* Section 0 has sh_addr 0 and sh_size 0. */
*num = info->sechdrs[sec].sh_size / object_size;
return (void *)info->sechdrs[sec].sh_addr;
}
/* Find a module section: 0 means not found. Ignores SHF_ALLOC flag. */
static unsigned int find_any_sec(const struct load_info *info, const char *name)
{
unsigned int i;
for (i = 1; i < info->hdr->e_shnum; i++) {
Elf_Shdr *shdr = &info->sechdrs[i];
if (strcmp(info->secstrings + shdr->sh_name, name) == 0)
return i;
}
return 0;
}
/*
* Find a module section, or NULL. Fill in number of "objects" in section.
* Ignores SHF_ALLOC flag.
*/
static __maybe_unused void *any_section_objs(const struct load_info *info,
const char *name,
size_t object_size,
unsigned int *num)
{
unsigned int sec = find_any_sec(info, name);
/* Section 0 has sh_addr 0 and sh_size 0. */
*num = info->sechdrs[sec].sh_size / object_size;
return (void *)info->sechdrs[sec].sh_addr;
}
#ifndef CONFIG_MODVERSIONS
#define symversion(base, idx) NULL
#else
#define symversion(base, idx) ((base != NULL) ? ((base) + (idx)) : NULL)
#endif
module: use relative references for __ksymtab entries An ordinary arm64 defconfig build has ~64 KB worth of __ksymtab entries, each consisting of two 64-bit fields containing absolute references, to the symbol itself and to a char array containing its name, respectively. When we build the same configuration with KASLR enabled, we end up with an additional ~192 KB of relocations in the .init section, i.e., one 24 byte entry for each absolute reference, which all need to be processed at boot time. Given how the struct kernel_symbol that describes each entry is completely local to module.c (except for the references emitted by EXPORT_SYMBOL() itself), we can easily modify it to contain two 32-bit relative references instead. This reduces the size of the __ksymtab section by 50% for all 64-bit architectures, and gets rid of the runtime relocations entirely for architectures implementing KASLR, either via standard PIE linking (arm64) or using custom host tools (x86). Note that the binary search involving __ksymtab contents relies on each section being sorted by symbol name. This is implemented based on the input section names, not the names in the ksymtab entries, so this patch does not interfere with that. Given that the use of place-relative relocations requires support both in the toolchain and in the module loader, we cannot enable this feature for all architectures. So make it dependent on whether CONFIG_HAVE_ARCH_PREL32_RELOCATIONS is defined. Link: http://lkml.kernel.org/r/20180704083651.24360-4-ard.biesheuvel@linaro.org Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jessica Yu <jeyu@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:56:09 +00:00
static const char *kernel_symbol_name(const struct kernel_symbol *sym)
{
#ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
return offset_to_ptr(&sym->name_offset);
#else
return sym->name;
#endif
}
module: add support for symbol namespaces. The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-06 10:32:27 +00:00
static const char *kernel_symbol_namespace(const struct kernel_symbol *sym)
{
#ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
module: Fix link failure due to invalid relocation on namespace offset Commit 8651ec01daed ("module: add support for symbol namespaces.") broke linking for arm64 defconfig: | lib/crypto/arc4.o: In function `__ksymtab_arc4_setkey': | arc4.c:(___ksymtab+arc4_setkey+0x8): undefined reference to `no symbol' | lib/crypto/arc4.o: In function `__ksymtab_arc4_crypt': | arc4.c:(___ksymtab+arc4_crypt+0x8): undefined reference to `no symbol' This is because the dummy initialisation of the 'namespace_offset' field in 'struct kernel_symbol' when using EXPORT_SYMBOL on architectures with support for PREL32 locations uses an offset from an absolute address (0) in an effort to trick 'offset_to_pointer' into behaving as a NOP, allowing non-namespaced symbols to be treated in the same way as those belonging to a namespace. Unfortunately, place-relative relocations require a symbol reference rather than an absolute value and, although x86 appears to get away with this due to placing the kernel text at the top of the address space, it almost certainly results in a runtime failure if the kernel is relocated dynamically as a result of KASLR. Rework 'namespace_offset' so that a value of 0, which cannot occur for a valid namespaced symbol, indicates that the corresponding symbol does not belong to a namespace. Cc: Matthias Maennich <maennich@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Fixes: 8651ec01daed ("module: add support for symbol namespaces.") Reported-by: kbuild test robot <lkp@intel.com> Tested-by: Matthias Maennich <maennich@google.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matthias Maennich <maennich@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-11 12:26:46 +00:00
if (!sym->namespace_offset)
return NULL;
module: add support for symbol namespaces. The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-06 10:32:27 +00:00
return offset_to_ptr(&sym->namespace_offset);
#else
return sym->namespace;
#endif
}
int cmp_name(const void *name, const void *sym)
{
return strcmp(name, kernel_symbol_name(sym));
}
static bool find_exported_symbol_in_section(const struct symsearch *syms,
struct module *owner,
struct find_symbol_arg *fsa)
{
struct kernel_symbol *sym;
if (!fsa->gplok && syms->license == GPL_ONLY)
return false;
sym = bsearch(fsa->name, syms->start, syms->stop - syms->start,
sizeof(struct kernel_symbol), cmp_name);
if (!sym)
return false;
fsa->owner = owner;
fsa->crc = symversion(syms->crcs, sym - syms->start);
fsa->sym = sym;
fsa->license = syms->license;
return true;
}
/*
* Find an exported symbol and return it, along with, (optional) crc and
* (optional) module which owns it. Needs preempt disabled or module_mutex.
*/
bool find_symbol(struct find_symbol_arg *fsa)
{
static const struct symsearch arr[] = {
{ __start___ksymtab, __stop___ksymtab, __start___kcrctab,
NOT_GPL_ONLY },
{ __start___ksymtab_gpl, __stop___ksymtab_gpl,
__start___kcrctab_gpl,
GPL_ONLY },
};
struct module *mod;
unsigned int i;
module_assert_mutex_or_preempt();
for (i = 0; i < ARRAY_SIZE(arr); i++)
if (find_exported_symbol_in_section(&arr[i], NULL, fsa))
return true;
list_for_each_entry_rcu(mod, &modules, list,
lockdep_is_held(&module_mutex)) {
struct symsearch arr[] = {
{ mod->syms, mod->syms + mod->num_syms, mod->crcs,
NOT_GPL_ONLY },
{ mod->gpl_syms, mod->gpl_syms + mod->num_gpl_syms,
mod->gpl_crcs,
GPL_ONLY },
};
if (mod->state == MODULE_STATE_UNFORMED)
continue;
for (i = 0; i < ARRAY_SIZE(arr); i++)
if (find_exported_symbol_in_section(&arr[i], mod, fsa))
return true;
}
pr_debug("Failed to find symbol %s\n", fsa->name);
return false;
}
/*
* Search for module by name: must hold module_mutex (or preempt disabled
* for read-only access).
*/
struct module *find_module_all(const char *name, size_t len,
bool even_unformed)
{
struct module *mod;
module_assert_mutex_or_preempt();
list_for_each_entry_rcu(mod, &modules, list,
lockdep_is_held(&module_mutex)) {
if (!even_unformed && mod->state == MODULE_STATE_UNFORMED)
continue;
if (strlen(mod->name) == len && !memcmp(mod->name, name, len))
return mod;
}
return NULL;
}
struct module *find_module(const char *name)
{
return find_module_all(name, strlen(name), false);
}
#ifdef CONFIG_SMP
static inline void __percpu *mod_percpu(struct module *mod)
{
return mod->percpu;
}
static int percpu_modalloc(struct module *mod, struct load_info *info)
{
Elf_Shdr *pcpusec = &info->sechdrs[info->index.pcpu];
unsigned long align = pcpusec->sh_addralign;
if (!pcpusec->sh_size)
return 0;
if (align > PAGE_SIZE) {
pr_warn("%s: per-cpu alignment %li > %li\n",
mod->name, align, PAGE_SIZE);
align = PAGE_SIZE;
}
mod->percpu = __alloc_reserved_percpu(pcpusec->sh_size, align);
if (!mod->percpu) {
pr_warn("%s: Could not allocate %lu bytes percpu data\n",
mod->name, (unsigned long)pcpusec->sh_size);
return -ENOMEM;
}
mod->percpu_size = pcpusec->sh_size;
return 0;
}
static void percpu_modfree(struct module *mod)
{
free_percpu(mod->percpu);
}
static unsigned int find_pcpusec(struct load_info *info)
{
return find_sec(info, ".data..percpu");
}
static void percpu_modcopy(struct module *mod,
const void *from, unsigned long size)
{
int cpu;
for_each_possible_cpu(cpu)
memcpy(per_cpu_ptr(mod->percpu, cpu), from, size);
}
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 14:37:36 +00:00
bool __is_module_percpu_address(unsigned long addr, unsigned long *can_addr)
{
struct module *mod;
unsigned int cpu;
preempt_disable();
list_for_each_entry_rcu(mod, &modules, list) {
if (mod->state == MODULE_STATE_UNFORMED)
continue;
if (!mod->percpu_size)
continue;
for_each_possible_cpu(cpu) {
void *start = per_cpu_ptr(mod->percpu, cpu);
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 14:37:36 +00:00
void *va = (void *)addr;
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 14:37:36 +00:00
if (va >= start && va < start + mod->percpu_size) {
if (can_addr) {
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 14:37:36 +00:00
*can_addr = (unsigned long) (va - start);
*can_addr += (unsigned long)
per_cpu_ptr(mod->percpu,
get_boot_cpu_id());
}
preempt_enable();
return true;
}
}
}
preempt_enable();
return false;
}
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 14:37:36 +00:00
/**
* is_module_percpu_address() - test whether address is from module static percpu
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 14:37:36 +00:00
* @addr: address to test
*
* Test whether @addr belongs to module static percpu area.
*
* Return: %true if @addr is from module static percpu area
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 14:37:36 +00:00
*/
bool is_module_percpu_address(unsigned long addr)
{
return __is_module_percpu_address(addr, NULL);
}
#else /* ... !CONFIG_SMP */
static inline void __percpu *mod_percpu(struct module *mod)
{
return NULL;
}
static int percpu_modalloc(struct module *mod, struct load_info *info)
{
/* UP modules shouldn't have this section: ENOMEM isn't quite right */
if (info->sechdrs[info->index.pcpu].sh_size != 0)
return -ENOMEM;
return 0;
}
static inline void percpu_modfree(struct module *mod)
{
}
static unsigned int find_pcpusec(struct load_info *info)
{
return 0;
}
static inline void percpu_modcopy(struct module *mod,
const void *from, unsigned long size)
{
/* pcpusec should be 0, and size of that section should be 0. */
BUG_ON(size != 0);
}
bool is_module_percpu_address(unsigned long addr)
{
return false;
}
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 14:37:36 +00:00
bool __is_module_percpu_address(unsigned long addr, unsigned long *can_addr)
{
return false;
}
#endif /* CONFIG_SMP */
[PATCH] modules: add version and srcversion to sysfs This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 05:05:15 +00:00
#define MODINFO_ATTR(field) \
static void setup_modinfo_##field(struct module *mod, const char *s) \
{ \
mod->field = kstrdup(s, GFP_KERNEL); \
} \
static ssize_t show_modinfo_##field(struct module_attribute *mattr, \
struct module_kobject *mk, char *buffer) \
[PATCH] modules: add version and srcversion to sysfs This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 05:05:15 +00:00
{ \
return scnprintf(buffer, PAGE_SIZE, "%s\n", mk->mod->field); \
[PATCH] modules: add version and srcversion to sysfs This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 05:05:15 +00:00
} \
static int modinfo_##field##_exists(struct module *mod) \
{ \
return mod->field != NULL; \
} \
static void free_modinfo_##field(struct module *mod) \
{ \
kfree(mod->field); \
mod->field = NULL; \
[PATCH] modules: add version and srcversion to sysfs This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 05:05:15 +00:00
} \
static struct module_attribute modinfo_##field = { \
.attr = { .name = __stringify(field), .mode = 0444 }, \
[PATCH] modules: add version and srcversion to sysfs This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 05:05:15 +00:00
.show = show_modinfo_##field, \
.setup = setup_modinfo_##field, \
.test = modinfo_##field##_exists, \
.free = free_modinfo_##field, \
};
MODINFO_ATTR(version);
MODINFO_ATTR(srcversion);
static struct {
char name[MODULE_NAME_LEN + 1];
char taints[MODULE_FLAGS_BUF_SIZE];
} last_unloaded_module;
#ifdef CONFIG_MODULE_UNLOAD
EXPORT_TRACEPOINT_SYMBOL(module_get);
/* MODULE_REF_BASE is the base reference count by kmodule loader. */
#define MODULE_REF_BASE 1
/* Init the unload section of the module. */
static int module_unload_init(struct module *mod)
{
/*
* Initialize reference counter to MODULE_REF_BASE.
* refcnt == 0 means module is going.
*/
atomic_set(&mod->refcnt, MODULE_REF_BASE);
INIT_LIST_HEAD(&mod->source_list);
INIT_LIST_HEAD(&mod->target_list);
/* Hold reference count during initialization. */
atomic_inc(&mod->refcnt);
return 0;
}
/* Does a already use b? */
static int already_uses(struct module *a, struct module *b)
{
struct module_use *use;
list_for_each_entry(use, &b->source_list, source_list) {
module: already_uses() - reduce pr_debug output volume already_uses() is unnecessarily chatty. `modprobe i915` yields 491 messages like: [ 64.108744] i915 uses drm! This is a normal situation, and isn't worth all the log entries. NOTE: I've preserved the "does not use %s" messages, which happens less often, but does happen. Its not clear to me what it tells a reader, or what info might improve the pr_debug's utility. [ 6847.584999] main:already_uses:569: amdgpu does not use ttm! [ 6847.585001] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585014] main:already_uses:569: amdgpu does not use drm! [ 6847.585016] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585024] main:already_uses:569: amdgpu does not use drm_display_helper! [ 6847.585025] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585084] main:already_uses:569: amdgpu does not use drm_kms_helper! [ 6847.585086] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585175] main:already_uses:569: amdgpu does not use drm_buddy! [ 6847.585176] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585202] main:already_uses:569: amdgpu does not use i2c_algo_bit! [ 6847.585204] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585249] main:already_uses:569: amdgpu does not use gpu_sched! [ 6847.585250] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585314] main:already_uses:569: amdgpu does not use video! [ 6847.585315] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585409] main:already_uses:569: amdgpu does not use iommu_v2! [ 6847.585410] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6847.585816] main:already_uses:569: amdgpu does not use drm_ttm_helper! [ 6847.585818] main:add_module_usage:584: Allocating new usage for amdgpu. [ 6848.762268] dyndbg: add-module: amdgpu.2533 sites no functional changes. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-22 01:36:23 +00:00
if (use->source == a)
return 1;
}
pr_debug("%s does not use %s!\n", a->name, b->name);
return 0;
}
/*
* Module a uses b
* - we add 'a' as a "source", 'b' as a "target" of module use
* - the module_use is added to the list of 'b' sources (so
* 'b' can walk the list to see who sourced them), and of 'a'
* targets (so 'a' can see what modules it targets).
*/
static int add_module_usage(struct module *a, struct module *b)
{
struct module_use *use;
pr_debug("Allocating new usage for %s.\n", a->name);
use = kmalloc(sizeof(*use), GFP_ATOMIC);
if (!use)
return -ENOMEM;
use->source = a;
use->target = b;
list_add(&use->source_list, &b->source_list);
list_add(&use->target_list, &a->target_list);
return 0;
}
/* Module a uses b: caller needs module_mutex() */
static int ref_module(struct module *a, struct module *b)
{
int err;
if (b == NULL || already_uses(a, b))
return 0;
/* If module isn't available, we fail. */
err = strong_try_module_get(b);
if (err)
return err;
err = add_module_usage(a, b);
if (err) {
module_put(b);
return err;
}
return 0;
}
/* Clear the unload stuff of the module. */
static void module_unload_free(struct module *mod)
{
struct module_use *use, *tmp;
mutex_lock(&module_mutex);
list_for_each_entry_safe(use, tmp, &mod->target_list, target_list) {
struct module *i = use->target;
pr_debug("%s unusing %s\n", mod->name, i->name);
module_put(i);
list_del(&use->source_list);
list_del(&use->target_list);
kfree(use);
}
mutex_unlock(&module_mutex);
}
#ifdef CONFIG_MODULE_FORCE_UNLOAD
static inline int try_force_unload(unsigned int flags)
{
int ret = (flags & O_TRUNC);
if (ret)
add_taint(TAINT_FORCED_RMMOD, LOCKDEP_NOW_UNRELIABLE);
return ret;
}
#else
static inline int try_force_unload(unsigned int flags)
{
return 0;
}
#endif /* CONFIG_MODULE_FORCE_UNLOAD */
/* Try to release refcount of module, 0 means success. */
static int try_release_module_ref(struct module *mod)
{
int ret;
/* Try to decrement refcnt which we set at loading */
ret = atomic_sub_return(MODULE_REF_BASE, &mod->refcnt);
BUG_ON(ret < 0);
if (ret)
/* Someone can put this right now, recover with checking */
ret = atomic_add_unless(&mod->refcnt, MODULE_REF_BASE, 0);
return ret;
}
static int try_stop_module(struct module *mod, int flags, int *forced)
{
/* If it's not unused, quit unless we're forcing. */
if (try_release_module_ref(mod) != 0) {
*forced = try_force_unload(flags);
if (!(*forced))
return -EWOULDBLOCK;
}
/* Mark it as dying. */
mod->state = MODULE_STATE_GOING;
return 0;
}
/**
* module_refcount() - return the refcount or -1 if unloading
* @mod: the module we're checking
*
* Return:
* -1 if the module is in the process of unloading
* otherwise the number of references in the kernel to the module
*/
int module_refcount(struct module *mod)
{
return atomic_read(&mod->refcnt) - MODULE_REF_BASE;
}
EXPORT_SYMBOL(module_refcount);
/* This exists whether we can unload or not */
static void free_module(struct module *mod);
SYSCALL_DEFINE2(delete_module, const char __user *, name_user,
unsigned int, flags)
{
struct module *mod;
char name[MODULE_NAME_LEN];
char buf[MODULE_FLAGS_BUF_SIZE];
int ret, forced = 0;
if (!capable(CAP_SYS_MODULE) || modules_disabled)
return -EPERM;
if (strncpy_from_user(name, name_user, MODULE_NAME_LEN-1) < 0)
return -EFAULT;
name[MODULE_NAME_LEN-1] = '\0';
audit_log_kern_module(name);
if (mutex_lock_interruptible(&module_mutex) != 0)
return -EINTR;
mod = find_module(name);
if (!mod) {
ret = -ENOENT;
goto out;
}
if (!list_empty(&mod->source_list)) {
/* Other modules depend on us: get rid of them first. */
ret = -EWOULDBLOCK;
goto out;
}
/* Doing init or already dying? */
if (mod->state != MODULE_STATE_LIVE) {
/* FIXME: if (force), slam module count damn the torpedoes */
pr_debug("%s already dying\n", mod->name);
ret = -EBUSY;
goto out;
}
/* If it has an init func, it must have an exit func to unload */
if (mod->init && !mod->exit) {
forced = try_force_unload(flags);
if (!forced) {
/* This module can't be removed */
ret = -EBUSY;
goto out;
}
}
ret = try_stop_module(mod, flags, &forced);
if (ret != 0)
goto out;
mutex_unlock(&module_mutex);
/* Final destruction now no one is using it. */
if (mod->exit != NULL)
mod->exit();
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_GOING, mod);
klp_module_going(mod);
ftrace_release_mod(mod);
async_synchronize_full();
/* Store the name and taints of the last unloaded module for diagnostic purposes */
strscpy(last_unloaded_module.name, mod->name, sizeof(last_unloaded_module.name));
strscpy(last_unloaded_module.taints, module_flags(mod, buf, false), sizeof(last_unloaded_module.taints));
free_module(mod);
/* someone could wait for the module in add_unformed_module() */
wake_up_all(&module_wq);
return 0;
out:
mutex_unlock(&module_mutex);
return ret;
}
void __symbol_put(const char *symbol)
{
struct find_symbol_arg fsa = {
.name = symbol,
.gplok = true,
};
preempt_disable();
BUG_ON(!find_symbol(&fsa));
module_put(fsa.owner);
preempt_enable();
}
EXPORT_SYMBOL(__symbol_put);
/* Note this assumes addr is a function, which it currently always is. */
void symbol_put_addr(void *addr)
{
struct module *modaddr;
unsigned long a = (unsigned long)dereference_function_descriptor(addr);
if (core_kernel_text(a))
return;
/*
* Even though we hold a reference on the module; we still need to
* disable preemption in order to safely traverse the data structure.
*/
preempt_disable();
modaddr = __module_text_address(a);
BUG_ON(!modaddr);
module_put(modaddr);
preempt_enable();
}
EXPORT_SYMBOL_GPL(symbol_put_addr);
static ssize_t show_refcnt(struct module_attribute *mattr,
struct module_kobject *mk, char *buffer)
{
return sprintf(buffer, "%i\n", module_refcount(mk->mod));
}
static struct module_attribute modinfo_refcnt =
__ATTR(refcnt, 0444, show_refcnt, NULL);
void __module_get(struct module *module)
{
if (module) {
atomic_inc(&module->refcnt);
trace_module_get(module, _RET_IP_);
}
}
EXPORT_SYMBOL(__module_get);
bool try_module_get(struct module *module)
{
bool ret = true;
if (module) {
/* Note: here, we can fail to get a reference */
if (likely(module_is_live(module) &&
atomic_inc_not_zero(&module->refcnt) != 0))
trace_module_get(module, _RET_IP_);
else
ret = false;
}
return ret;
}
EXPORT_SYMBOL(try_module_get);
void module_put(struct module *module)
{
int ret;
if (module) {
ret = atomic_dec_if_positive(&module->refcnt);
WARN_ON(ret < 0); /* Failed to put refcount */
trace_module_put(module, _RET_IP_);
}
}
EXPORT_SYMBOL(module_put);
#else /* !CONFIG_MODULE_UNLOAD */
static inline void module_unload_free(struct module *mod)
{
}
static int ref_module(struct module *a, struct module *b)
{
return strong_try_module_get(b);
}
static inline int module_unload_init(struct module *mod)
{
return 0;
}
#endif /* CONFIG_MODULE_UNLOAD */
size_t module_flags_taint(unsigned long taints, char *buf)
{
size_t l = 0;
taint/module: Clean up global and module taint flags handling The commit 66cc69e34e86a231 ("Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE") updated module_taint_flags() to potentially print one more character. But it did not increase the size of the corresponding buffers in m_show() and print_modules(). We have recently done the same mistake when adding a taint flag for livepatching, see https://lkml.kernel.org/r/cfba2c823bb984690b73572aaae1db596b54a082.1472137475.git.jpoimboe@redhat.com Also struct module uses an incompatible type for mod-taints flags. It survived from the commit 2bc2d61a9638dab670d ("[PATCH] list module taint flags in Oops/panic"). There was used "int" for the global taint flags at these times. But only the global tain flags was later changed to "unsigned long" by the commit 25ddbb18aae33ad2 ("Make the taint flags reliable"). This patch defines TAINT_FLAGS_COUNT that can be used to create arrays and buffers of the right size. Note that we could not use enum because the taint flag indexes are used also in assembly code. Then it reworks the table that describes the taint flags. The TAINT_* numbers can be used as the index. Instead, we add information if the taint flag is also shown per-module. Finally, it uses "unsigned long", bit operations, and the updated taint_flags table also for mod->taints. It is not optimal because only few taint flags can be printed by module_taint_flags(). But better be on the safe side. IMHO, it is not worth the optimization and this is a good compromise. Signed-off-by: Petr Mladek <pmladek@suse.com> Link: http://lkml.kernel.org/r/1474458442-21581-1-git-send-email-pmladek@suse.com [jeyu@redhat.com: fix broken lkml link in changelog] Signed-off-by: Jessica Yu <jeyu@redhat.com>
2016-09-21 11:47:22 +00:00
int i;
for (i = 0; i < TAINT_FLAGS_COUNT; i++) {
if (taint_flags[i].module && test_bit(i, &taints))
buf[l++] = taint_flags[i].c_true;
taint/module: Clean up global and module taint flags handling The commit 66cc69e34e86a231 ("Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE") updated module_taint_flags() to potentially print one more character. But it did not increase the size of the corresponding buffers in m_show() and print_modules(). We have recently done the same mistake when adding a taint flag for livepatching, see https://lkml.kernel.org/r/cfba2c823bb984690b73572aaae1db596b54a082.1472137475.git.jpoimboe@redhat.com Also struct module uses an incompatible type for mod-taints flags. It survived from the commit 2bc2d61a9638dab670d ("[PATCH] list module taint flags in Oops/panic"). There was used "int" for the global taint flags at these times. But only the global tain flags was later changed to "unsigned long" by the commit 25ddbb18aae33ad2 ("Make the taint flags reliable"). This patch defines TAINT_FLAGS_COUNT that can be used to create arrays and buffers of the right size. Note that we could not use enum because the taint flag indexes are used also in assembly code. Then it reworks the table that describes the taint flags. The TAINT_* numbers can be used as the index. Instead, we add information if the taint flag is also shown per-module. Finally, it uses "unsigned long", bit operations, and the updated taint_flags table also for mod->taints. It is not optimal because only few taint flags can be printed by module_taint_flags(). But better be on the safe side. IMHO, it is not worth the optimization and this is a good compromise. Signed-off-by: Petr Mladek <pmladek@suse.com> Link: http://lkml.kernel.org/r/1474458442-21581-1-git-send-email-pmladek@suse.com [jeyu@redhat.com: fix broken lkml link in changelog] Signed-off-by: Jessica Yu <jeyu@redhat.com>
2016-09-21 11:47:22 +00:00
}
return l;
}
static ssize_t show_initstate(struct module_attribute *mattr,
struct module_kobject *mk, char *buffer)
{
const char *state = "unknown";
switch (mk->mod->state) {
case MODULE_STATE_LIVE:
state = "live";
break;
case MODULE_STATE_COMING:
state = "coming";
break;
case MODULE_STATE_GOING:
state = "going";
break;
default:
BUG();
}
return sprintf(buffer, "%s\n", state);
}
static struct module_attribute modinfo_initstate =
__ATTR(initstate, 0444, show_initstate, NULL);
static ssize_t store_uevent(struct module_attribute *mattr,
struct module_kobject *mk,
const char *buffer, size_t count)
{
int rc;
rc = kobject_synth_uevent(&mk->kobj, buffer, count);
return rc ? rc : count;
}
struct module_attribute module_uevent =
__ATTR(uevent, 0200, NULL, store_uevent);
static ssize_t show_coresize(struct module_attribute *mattr,
struct module_kobject *mk, char *buffer)
{
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
unsigned int size = mk->mod->mem[MOD_TEXT].size;
if (!IS_ENABLED(CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC)) {
for_class_mod_mem_type(type, core_data)
size += mk->mod->mem[type].size;
}
return sprintf(buffer, "%u\n", size);
}
static struct module_attribute modinfo_coresize =
__ATTR(coresize, 0444, show_coresize, NULL);
#ifdef CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
static ssize_t show_datasize(struct module_attribute *mattr,
struct module_kobject *mk, char *buffer)
{
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
unsigned int size = 0;
for_class_mod_mem_type(type, core_data)
size += mk->mod->mem[type].size;
return sprintf(buffer, "%u\n", size);
}
static struct module_attribute modinfo_datasize =
__ATTR(datasize, 0444, show_datasize, NULL);
#endif
static ssize_t show_initsize(struct module_attribute *mattr,
struct module_kobject *mk, char *buffer)
{
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
unsigned int size = 0;
for_class_mod_mem_type(type, init)
size += mk->mod->mem[type].size;
return sprintf(buffer, "%u\n", size);
}
static struct module_attribute modinfo_initsize =
__ATTR(initsize, 0444, show_initsize, NULL);
static ssize_t show_taint(struct module_attribute *mattr,
struct module_kobject *mk, char *buffer)
{
size_t l;
l = module_flags_taint(mk->mod->taints, buffer);
buffer[l++] = '\n';
return l;
}
static struct module_attribute modinfo_taint =
__ATTR(taint, 0444, show_taint, NULL);
struct module_attribute *modinfo_attrs[] = {
&module_uevent,
&modinfo_version,
&modinfo_srcversion,
&modinfo_initstate,
&modinfo_coresize,
#ifdef CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
&modinfo_datasize,
#endif
&modinfo_initsize,
&modinfo_taint,
#ifdef CONFIG_MODULE_UNLOAD
&modinfo_refcnt,
#endif
NULL,
};
size_t modinfo_attrs_count = ARRAY_SIZE(modinfo_attrs);
static const char vermagic[] = VERMAGIC_STRING;
int try_to_force_load(struct module *mod, const char *reason)
{
#ifdef CONFIG_MODULE_FORCE_LOAD
if (!test_taint(TAINT_FORCED_MODULE))
pr_warn("%s: %s: kernel tainted.\n", mod->name, reason);
add_taint_module(mod, TAINT_FORCED_MODULE, LOCKDEP_NOW_UNRELIABLE);
return 0;
#else
return -ENOEXEC;
#endif
}
/* Parse tag=value strings from .modinfo section */
char *module_next_tag_pair(char *string, unsigned long *secsize)
{
/* Skip non-zero chars */
while (string[0]) {
string++;
if ((*secsize)-- <= 1)
return NULL;
}
/* Skip any zero padding. */
while (!string[0]) {
string++;
if ((*secsize)-- <= 1)
return NULL;
}
return string;
}
module: add support for symbol namespaces. The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-06 10:32:27 +00:00
static char *get_next_modinfo(const struct load_info *info, const char *tag,
char *prev)
{
char *p;
unsigned int taglen = strlen(tag);
Elf_Shdr *infosec = &info->sechdrs[info->index.info];
unsigned long size = infosec->sh_size;
/*
* get_modinfo() calls made before rewrite_section_headers()
* must use sh_offset, as sh_addr isn't set!
*/
char *modinfo = (char *)info->hdr + infosec->sh_offset;
if (prev) {
size -= prev - modinfo;
modinfo = module_next_tag_pair(prev, &size);
}
for (p = modinfo; p; p = module_next_tag_pair(p, &size)) {
if (strncmp(p, tag, taglen) == 0 && p[taglen] == '=')
return p + taglen + 1;
}
return NULL;
}
static char *get_modinfo(const struct load_info *info, const char *tag)
{
return get_next_modinfo(info, tag, NULL);
}
module: add support for symbol namespaces. The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-06 10:32:27 +00:00
static int verify_namespace_is_imported(const struct load_info *info,
const struct kernel_symbol *sym,
struct module *mod)
{
const char *namespace;
char *imported_namespace;
namespace = kernel_symbol_namespace(sym);
if (namespace && namespace[0]) {
for_each_modinfo_entry(imported_namespace, info, "import_ns") {
module: add support for symbol namespaces. The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-06 10:32:27 +00:00
if (strcmp(namespace, imported_namespace) == 0)
return 0;
}
#ifdef CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
pr_warn(
#else
pr_err(
#endif
"%s: module uses symbol (%s) from namespace %s, but does not import it.\n",
mod->name, kernel_symbol_name(sym), namespace);
#ifndef CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
module: add support for symbol namespaces. The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-06 10:32:27 +00:00
return -EINVAL;
#endif
module: add support for symbol namespaces. The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-06 10:32:27 +00:00
}
return 0;
}
static bool inherit_taint(struct module *mod, struct module *owner, const char *name)
{
if (!owner || !test_bit(TAINT_PROPRIETARY_MODULE, &owner->taints))
return true;
if (mod->using_gplonly_symbols) {
pr_err("%s: module using GPL-only symbols uses symbols %s from proprietary module %s.\n",
mod->name, name, owner->name);
return false;
}
if (!test_bit(TAINT_PROPRIETARY_MODULE, &mod->taints)) {
pr_warn("%s: module uses symbols %s from proprietary module %s, inheriting taint.\n",
mod->name, name, owner->name);
set_bit(TAINT_PROPRIETARY_MODULE, &mod->taints);
}
return true;
}
module: add support for symbol namespaces. The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-06 10:32:27 +00:00
/* Resolve a symbol for this module. I.e. if we find one, record usage. */
static const struct kernel_symbol *resolve_symbol(struct module *mod,
const struct load_info *info,
const char *name,
char ownername[])
{
struct find_symbol_arg fsa = {
.name = name,
.gplok = !(mod->taints & (1 << TAINT_PROPRIETARY_MODULE)),
.warn = true,
};
int err;
/*
* The module_mutex should not be a heavily contended lock;
* if we get the occasional sleep here, we'll go an extra iteration
* in the wait_event_interruptible(), which is harmless.
*/
sched_annotate_sleep();
mutex_lock(&module_mutex);
if (!find_symbol(&fsa))
goto unlock;
if (fsa.license == GPL_ONLY)
mod->using_gplonly_symbols = true;
if (!inherit_taint(mod, fsa.owner, name)) {
fsa.sym = NULL;
goto getname;
}
if (!check_version(info, name, mod, fsa.crc)) {
fsa.sym = ERR_PTR(-EINVAL);
goto getname;
}
err = verify_namespace_is_imported(info, fsa.sym, mod);
module: add support for symbol namespaces. The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-06 10:32:27 +00:00
if (err) {
fsa.sym = ERR_PTR(err);
module: add support for symbol namespaces. The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to export a symbol to a specific namespace. There are no _GPL_FUTURE and _UNUSED variants because these are currently unused, and I'm not sure they are necessary. I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the namespace of ASM exports to NULL by default. In case of relative references, it will be relocatable to NULL. If there's a need, this should be pretty easy to add. A module that wants to use a symbol exported to a namespace must add a MODULE_IMPORT_NS() statement to their module code; otherwise, modpost will complain when building the module, and the kernel module loader will emit an error and fail when loading the module. MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That tag can be observed by the modinfo command, modpost and kernel/module.c at the time of loading the module. The ELF symbols are renamed to include the namespace with an asm label; for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes 'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace checking, without having to go through all the effort of parsing ELF and relocation records just to get to the struct kernel_symbols. On x86_64 I saw no difference in binary size (compression), but at runtime this will require a word of memory per export to hold the namespace. An alternative could be to store namespaced symbols in their own section and use a separate 'struct namespaced_kernel_symbol' for that section, at the cost of making the module loader more complex. Co-developed-by: Martijn Coenen <maco@android.com> Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-06 10:32:27 +00:00
goto getname;
}
err = ref_module(mod, fsa.owner);
if (err) {
fsa.sym = ERR_PTR(err);
goto getname;
}
getname:
/* We must make copy under the lock if we failed to get ref. */
strncpy(ownername, module_name(fsa.owner), MODULE_NAME_LEN);
unlock:
mutex_unlock(&module_mutex);
return fsa.sym;
}
static const struct kernel_symbol *
resolve_symbol_wait(struct module *mod,
const struct load_info *info,
const char *name)
{
const struct kernel_symbol *ksym;
char owner[MODULE_NAME_LEN];
if (wait_event_interruptible_timeout(module_wq,
!IS_ERR(ksym = resolve_symbol(mod, info, name, owner))
|| PTR_ERR(ksym) != -EBUSY,
30 * HZ) <= 0) {
pr_warn("%s: gave up waiting for init of module %s.\n",
mod->name, owner);
}
return ksym;
}
void __weak module_memfree(void *module_region)
{
/*
* This memory may be RO, and freeing RO memory in an interrupt is not
* supported by vmalloc.
*/
WARN_ON(in_interrupt());
vfree(module_region);
}
void __weak module_arch_cleanup(struct module *mod)
{
}
void __weak module_arch_freeing_init(struct module *mod)
{
}
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
static bool mod_mem_use_vmalloc(enum mod_mem_type type)
{
return IS_ENABLED(CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC) &&
mod_mem_type_is_core_data(type);
}
static void *module_memory_alloc(unsigned int size, enum mod_mem_type type)
{
if (mod_mem_use_vmalloc(type))
return vzalloc(size);
return module_alloc(size);
}
static void module_memory_free(void *ptr, enum mod_mem_type type)
{
if (mod_mem_use_vmalloc(type))
vfree(ptr);
else
module_memfree(ptr);
}
static void free_mod_mem(struct module *mod)
{
for_each_mod_mem_type(type) {
struct module_memory *mod_mem = &mod->mem[type];
if (type == MOD_DATA)
continue;
/* Free lock-classes; relies on the preceding sync_rcu(). */
lockdep_free_key_range(mod_mem->base, mod_mem->size);
if (mod_mem->size)
module_memory_free(mod_mem->base, type);
}
/* MOD_DATA hosts mod, so free it at last */
lockdep_free_key_range(mod->mem[MOD_DATA].base, mod->mem[MOD_DATA].size);
module_memory_free(mod->mem[MOD_DATA].base, MOD_DATA);
}
/* Free a module, remove from lists, etc. */
static void free_module(struct module *mod)
{
tracing/events: Add module tracepoints Add trace points to trace module_load, module_free, module_get, module_put and module_request, and use trace_event facility to get the trace output. Here's the sample output: TASK-PID CPU# TIMESTAMP FUNCTION | | | | | <...>-42 [000] 1.758380: module_request: fb0 wait=1 call_site=fb_open ... <...>-60 [000] 3.269403: module_load: scsi_wait_scan <...>-60 [000] 3.269432: module_put: scsi_wait_scan call_site=sys_init_module refcnt=0 <...>-61 [001] 3.273168: module_free: scsi_wait_scan ... <...>-1021 [000] 13.836081: module_load: sunrpc <...>-1021 [000] 13.840589: module_put: sunrpc call_site=sys_init_module refcnt=-1 <...>-1027 [000] 13.848098: module_get: sunrpc call_site=try_module_get refcnt=0 <...>-1027 [000] 13.848308: module_get: sunrpc call_site=get_filesystem refcnt=1 <...>-1027 [000] 13.848692: module_put: sunrpc call_site=put_filesystem refcnt=0 ... modprobe-2587 [001] 1088.437213: module_load: trace_events_sample F modprobe-2587 [001] 1088.437786: module_put: trace_events_sample call_site=sys_init_module refcnt=0 Note: - the taints flag can be 'F', 'C' and/or 'P' if mod->taints != 0 - the module refcnt is percpu, so it can be negative in a specific cpu Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <4A891B3C.5030608@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 08:56:28 +00:00
trace_module_free(mod);
mod_sysfs_teardown(mod);
/*
* We leave it in list to prevent duplicate loads, but make sure
* that noone uses it while it's being deconstructed.
*/
modules, lock around setting of MODULE_STATE_UNFORMED A panic was seen in the following sitation. There are two threads running on the system. The first thread is a system monitoring thread that is reading /proc/modules. The second thread is loading and unloading a module (in this example I'm using my simple dummy-module.ko). Note, in the "real world" this occurred with the qlogic driver module. When doing this, the following panic occurred: ------------[ cut here ]------------ kernel BUG at kernel/module.c:3739! invalid opcode: 0000 [#1] SMP Modules linked in: binfmt_misc sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw igb gf128mul glue_helper iTCO_wdt iTCO_vendor_support ablk_helper ptp sb_edac cryptd pps_core edac_core shpchp i2c_i801 pcspkr wmi lpc_ich ioatdma mfd_core dca ipmi_si nfsd ipmi_msghandler auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm isci drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: dummy_module] CPU: 37 PID: 186343 Comm: cat Tainted: GF O-------------- 3.10.0+ #7 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013 task: ffff8807fd2d8000 ti: ffff88080fa7c000 task.ti: ffff88080fa7c000 RIP: 0010:[<ffffffff810d64c5>] [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP: 0018:ffff88080fa7fe18 EFLAGS: 00010246 RAX: 0000000000000003 RBX: ffffffffa03b5200 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffff88080fa7fe38 RDI: ffffffffa03b5000 RBP: ffff88080fa7fe28 R08: 0000000000000010 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000000f R12: ffffffffa03b5000 R13: ffffffffa03b5008 R14: ffffffffa03b5200 R15: ffffffffa03b5000 FS: 00007f6ae57ef740(0000) GS:ffff88101e7a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000404f70 CR3: 0000000ffed48000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa03b5200 ffff8810101e4800 ffff88080fa7fe70 ffffffff810d666c ffff88081e807300 000000002e0f2fbf 0000000000000000 ffff88100f257b00 ffffffffa03b5008 ffff88080fa7ff48 ffff8810101e4800 ffff88080fa7fee0 Call Trace: [<ffffffff810d666c>] m_show+0x19c/0x1e0 [<ffffffff811e4d7e>] seq_read+0x16e/0x3b0 [<ffffffff812281ed>] proc_reg_read+0x3d/0x80 [<ffffffff811c0f2c>] vfs_read+0x9c/0x170 [<ffffffff811c1a58>] SyS_read+0x58/0xb0 [<ffffffff81605829>] system_call_fastpath+0x16/0x1b Code: 48 63 c2 83 c2 01 c6 04 03 29 48 63 d2 eb d9 0f 1f 80 00 00 00 00 48 63 d2 c6 04 13 2d 41 8b 0c 24 8d 50 02 83 f9 01 75 b2 eb cb <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 RIP [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP <ffff88080fa7fe18> Consider the two processes running on the system. CPU 0 (/proc/modules reader) CPU 1 (loading/unloading module) CPU 0 opens /proc/modules, and starts displaying data for each module by traversing the modules list via fs/seq_file.c:seq_open() and fs/seq_file.c:seq_read(). For each module in the modules list, seq_read does op->start() <-- this is a pointer to m_start() op->show() <- this is a pointer to m_show() op->stop() <-- this is a pointer to m_stop() The m_start(), m_show(), and m_stop() module functions are defined in kernel/module.c. The m_start() and m_stop() functions acquire and release the module_mutex respectively. ie) When reading /proc/modules, the module_mutex is acquired and released for each module. m_show() is called with the module_mutex held. It accesses the module struct data and attempts to write out module data. It is in this code path that the above BUG_ON() warning is encountered, specifically m_show() calls static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); ... The other thread, CPU 1, in unloading the module calls the syscall delete_module() defined in kernel/module.c. The module_mutex is acquired for a short time, and then released. free_module() is called without the module_mutex. free_module() then sets mod->state = MODULE_STATE_UNFORMED, also without the module_mutex. Some additional code is called and then the module_mutex is reacquired to remove the module from the modules list: /* Now we can delete it from the lists */ mutex_lock(&module_mutex); stop_machine(__unlink_module, mod, NULL); mutex_unlock(&module_mutex); This is the sequence of events that leads to the panic. CPU 1 is removing dummy_module via delete_module(). It acquires the module_mutex, and then releases it. CPU 1 has NOT set dummy_module->state to MODULE_STATE_UNFORMED yet. CPU 0, which is reading the /proc/modules, acquires the module_mutex and acquires a pointer to the dummy_module which is still in the modules list. CPU 0 calls m_show for dummy_module. The check in m_show() for MODULE_STATE_UNFORMED passed for dummy_module even though it is being torn down. Meanwhile CPU 1, which has been continuing to remove dummy_module without holding the module_mutex, now calls free_module() and sets dummy_module->state to MODULE_STATE_UNFORMED. CPU 0 now calls module_flags() with dummy_module and ... static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); and BOOM. Acquire and release the module_mutex lock around the setting of MODULE_STATE_UNFORMED in the teardown path, which should resolve the problem. Testing: In the unpatched kernel I can panic the system within 1 minute by doing while (true) do insmod dummy_module.ko; rmmod dummy_module.ko; done and while (true) do cat /proc/modules; done in separate terminals. In the patched kernel I was able to run just over one hour without seeing any issues. I also verified the output of panic via sysrq-c and the output of /proc/modules looks correct for all three states for the dummy_module. dummy_module 12661 0 - Unloading 0xffffffffa03a5000 (OE-) dummy_module 12661 0 - Live 0xffffffffa03bb000 (OE) dummy_module 14015 1 - Loading 0xffffffffa03a5000 (OE+) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2014-10-13 16:21:39 +00:00
mutex_lock(&module_mutex);
module: don't unlink the module until we've removed all exposure. Otherwise we get a race between unload and reload of the same module: the new module doesn't see the old one in the list, but then fails because it can't register over the still-extant entries in sysfs: [ 103.981925] ------------[ cut here ]------------ [ 103.986902] WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xab/0xd0() [ 103.993606] Hardware name: CrownBay Platform [ 103.998075] sysfs: cannot create duplicate filename '/module/pch_gbe' [ 104.004784] Modules linked in: pch_gbe(+) [last unloaded: pch_gbe] [ 104.011362] Pid: 3021, comm: modprobe Tainted: G W 3.9.0-rc5+ #5 [ 104.018662] Call Trace: [ 104.021286] [<c103599d>] warn_slowpath_common+0x6d/0xa0 [ 104.026933] [<c1168c8b>] ? sysfs_add_one+0xab/0xd0 [ 104.031986] [<c1168c8b>] ? sysfs_add_one+0xab/0xd0 [ 104.037000] [<c1035a4e>] warn_slowpath_fmt+0x2e/0x30 [ 104.042188] [<c1168c8b>] sysfs_add_one+0xab/0xd0 [ 104.046982] [<c1168dbe>] create_dir+0x5e/0xa0 [ 104.051633] [<c1168e78>] sysfs_create_dir+0x78/0xd0 [ 104.056774] [<c1262bc3>] kobject_add_internal+0x83/0x1f0 [ 104.062351] [<c126daf6>] ? kvasprintf+0x46/0x60 [ 104.067231] [<c1262ebd>] kobject_add_varg+0x2d/0x50 [ 104.072450] [<c1262f07>] kobject_init_and_add+0x27/0x30 [ 104.078075] [<c1089240>] mod_sysfs_setup+0x80/0x540 [ 104.083207] [<c1260851>] ? module_bug_finalize+0x51/0xc0 [ 104.088720] [<c108ab29>] load_module+0x1429/0x18b0 We can teardown sysfs first, then to be sure, put the state in MODULE_STATE_UNFORMED so it's ignored while we deconstruct it. Reported-by: Veaceslav Falico <vfalico@redhat.com> Tested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-17 03:50:03 +00:00
mod->state = MODULE_STATE_UNFORMED;
modules, lock around setting of MODULE_STATE_UNFORMED A panic was seen in the following sitation. There are two threads running on the system. The first thread is a system monitoring thread that is reading /proc/modules. The second thread is loading and unloading a module (in this example I'm using my simple dummy-module.ko). Note, in the "real world" this occurred with the qlogic driver module. When doing this, the following panic occurred: ------------[ cut here ]------------ kernel BUG at kernel/module.c:3739! invalid opcode: 0000 [#1] SMP Modules linked in: binfmt_misc sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw igb gf128mul glue_helper iTCO_wdt iTCO_vendor_support ablk_helper ptp sb_edac cryptd pps_core edac_core shpchp i2c_i801 pcspkr wmi lpc_ich ioatdma mfd_core dca ipmi_si nfsd ipmi_msghandler auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm isci drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: dummy_module] CPU: 37 PID: 186343 Comm: cat Tainted: GF O-------------- 3.10.0+ #7 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013 task: ffff8807fd2d8000 ti: ffff88080fa7c000 task.ti: ffff88080fa7c000 RIP: 0010:[<ffffffff810d64c5>] [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP: 0018:ffff88080fa7fe18 EFLAGS: 00010246 RAX: 0000000000000003 RBX: ffffffffa03b5200 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffff88080fa7fe38 RDI: ffffffffa03b5000 RBP: ffff88080fa7fe28 R08: 0000000000000010 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000000f R12: ffffffffa03b5000 R13: ffffffffa03b5008 R14: ffffffffa03b5200 R15: ffffffffa03b5000 FS: 00007f6ae57ef740(0000) GS:ffff88101e7a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000404f70 CR3: 0000000ffed48000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa03b5200 ffff8810101e4800 ffff88080fa7fe70 ffffffff810d666c ffff88081e807300 000000002e0f2fbf 0000000000000000 ffff88100f257b00 ffffffffa03b5008 ffff88080fa7ff48 ffff8810101e4800 ffff88080fa7fee0 Call Trace: [<ffffffff810d666c>] m_show+0x19c/0x1e0 [<ffffffff811e4d7e>] seq_read+0x16e/0x3b0 [<ffffffff812281ed>] proc_reg_read+0x3d/0x80 [<ffffffff811c0f2c>] vfs_read+0x9c/0x170 [<ffffffff811c1a58>] SyS_read+0x58/0xb0 [<ffffffff81605829>] system_call_fastpath+0x16/0x1b Code: 48 63 c2 83 c2 01 c6 04 03 29 48 63 d2 eb d9 0f 1f 80 00 00 00 00 48 63 d2 c6 04 13 2d 41 8b 0c 24 8d 50 02 83 f9 01 75 b2 eb cb <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 RIP [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP <ffff88080fa7fe18> Consider the two processes running on the system. CPU 0 (/proc/modules reader) CPU 1 (loading/unloading module) CPU 0 opens /proc/modules, and starts displaying data for each module by traversing the modules list via fs/seq_file.c:seq_open() and fs/seq_file.c:seq_read(). For each module in the modules list, seq_read does op->start() <-- this is a pointer to m_start() op->show() <- this is a pointer to m_show() op->stop() <-- this is a pointer to m_stop() The m_start(), m_show(), and m_stop() module functions are defined in kernel/module.c. The m_start() and m_stop() functions acquire and release the module_mutex respectively. ie) When reading /proc/modules, the module_mutex is acquired and released for each module. m_show() is called with the module_mutex held. It accesses the module struct data and attempts to write out module data. It is in this code path that the above BUG_ON() warning is encountered, specifically m_show() calls static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); ... The other thread, CPU 1, in unloading the module calls the syscall delete_module() defined in kernel/module.c. The module_mutex is acquired for a short time, and then released. free_module() is called without the module_mutex. free_module() then sets mod->state = MODULE_STATE_UNFORMED, also without the module_mutex. Some additional code is called and then the module_mutex is reacquired to remove the module from the modules list: /* Now we can delete it from the lists */ mutex_lock(&module_mutex); stop_machine(__unlink_module, mod, NULL); mutex_unlock(&module_mutex); This is the sequence of events that leads to the panic. CPU 1 is removing dummy_module via delete_module(). It acquires the module_mutex, and then releases it. CPU 1 has NOT set dummy_module->state to MODULE_STATE_UNFORMED yet. CPU 0, which is reading the /proc/modules, acquires the module_mutex and acquires a pointer to the dummy_module which is still in the modules list. CPU 0 calls m_show for dummy_module. The check in m_show() for MODULE_STATE_UNFORMED passed for dummy_module even though it is being torn down. Meanwhile CPU 1, which has been continuing to remove dummy_module without holding the module_mutex, now calls free_module() and sets dummy_module->state to MODULE_STATE_UNFORMED. CPU 0 now calls module_flags() with dummy_module and ... static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); and BOOM. Acquire and release the module_mutex lock around the setting of MODULE_STATE_UNFORMED in the teardown path, which should resolve the problem. Testing: In the unpatched kernel I can panic the system within 1 minute by doing while (true) do insmod dummy_module.ko; rmmod dummy_module.ko; done and while (true) do cat /proc/modules; done in separate terminals. In the patched kernel I was able to run just over one hour without seeing any issues. I also verified the output of panic via sysrq-c and the output of /proc/modules looks correct for all three states for the dummy_module. dummy_module 12661 0 - Unloading 0xffffffffa03a5000 (OE-) dummy_module 12661 0 - Live 0xffffffffa03bb000 (OE) dummy_module 14015 1 - Loading 0xffffffffa03a5000 (OE+) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2014-10-13 16:21:39 +00:00
mutex_unlock(&module_mutex);
module: don't unlink the module until we've removed all exposure. Otherwise we get a race between unload and reload of the same module: the new module doesn't see the old one in the list, but then fails because it can't register over the still-extant entries in sysfs: [ 103.981925] ------------[ cut here ]------------ [ 103.986902] WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xab/0xd0() [ 103.993606] Hardware name: CrownBay Platform [ 103.998075] sysfs: cannot create duplicate filename '/module/pch_gbe' [ 104.004784] Modules linked in: pch_gbe(+) [last unloaded: pch_gbe] [ 104.011362] Pid: 3021, comm: modprobe Tainted: G W 3.9.0-rc5+ #5 [ 104.018662] Call Trace: [ 104.021286] [<c103599d>] warn_slowpath_common+0x6d/0xa0 [ 104.026933] [<c1168c8b>] ? sysfs_add_one+0xab/0xd0 [ 104.031986] [<c1168c8b>] ? sysfs_add_one+0xab/0xd0 [ 104.037000] [<c1035a4e>] warn_slowpath_fmt+0x2e/0x30 [ 104.042188] [<c1168c8b>] sysfs_add_one+0xab/0xd0 [ 104.046982] [<c1168dbe>] create_dir+0x5e/0xa0 [ 104.051633] [<c1168e78>] sysfs_create_dir+0x78/0xd0 [ 104.056774] [<c1262bc3>] kobject_add_internal+0x83/0x1f0 [ 104.062351] [<c126daf6>] ? kvasprintf+0x46/0x60 [ 104.067231] [<c1262ebd>] kobject_add_varg+0x2d/0x50 [ 104.072450] [<c1262f07>] kobject_init_and_add+0x27/0x30 [ 104.078075] [<c1089240>] mod_sysfs_setup+0x80/0x540 [ 104.083207] [<c1260851>] ? module_bug_finalize+0x51/0xc0 [ 104.088720] [<c108ab29>] load_module+0x1429/0x18b0 We can teardown sysfs first, then to be sure, put the state in MODULE_STATE_UNFORMED so it's ignored while we deconstruct it. Reported-by: Veaceslav Falico <vfalico@redhat.com> Tested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-17 03:50:03 +00:00
/* Arch-specific cleanup. */
module_arch_cleanup(mod);
/* Module unload stuff */
module_unload_free(mod);
/* Free any allocated parameters. */
destroy_params(mod->kp, mod->num_kp);
module: preserve Elf information for livepatch modules For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-23 00:03:16 +00:00
if (is_livepatch_module(mod))
free_module_elf(mod);
module: don't unlink the module until we've removed all exposure. Otherwise we get a race between unload and reload of the same module: the new module doesn't see the old one in the list, but then fails because it can't register over the still-extant entries in sysfs: [ 103.981925] ------------[ cut here ]------------ [ 103.986902] WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xab/0xd0() [ 103.993606] Hardware name: CrownBay Platform [ 103.998075] sysfs: cannot create duplicate filename '/module/pch_gbe' [ 104.004784] Modules linked in: pch_gbe(+) [last unloaded: pch_gbe] [ 104.011362] Pid: 3021, comm: modprobe Tainted: G W 3.9.0-rc5+ #5 [ 104.018662] Call Trace: [ 104.021286] [<c103599d>] warn_slowpath_common+0x6d/0xa0 [ 104.026933] [<c1168c8b>] ? sysfs_add_one+0xab/0xd0 [ 104.031986] [<c1168c8b>] ? sysfs_add_one+0xab/0xd0 [ 104.037000] [<c1035a4e>] warn_slowpath_fmt+0x2e/0x30 [ 104.042188] [<c1168c8b>] sysfs_add_one+0xab/0xd0 [ 104.046982] [<c1168dbe>] create_dir+0x5e/0xa0 [ 104.051633] [<c1168e78>] sysfs_create_dir+0x78/0xd0 [ 104.056774] [<c1262bc3>] kobject_add_internal+0x83/0x1f0 [ 104.062351] [<c126daf6>] ? kvasprintf+0x46/0x60 [ 104.067231] [<c1262ebd>] kobject_add_varg+0x2d/0x50 [ 104.072450] [<c1262f07>] kobject_init_and_add+0x27/0x30 [ 104.078075] [<c1089240>] mod_sysfs_setup+0x80/0x540 [ 104.083207] [<c1260851>] ? module_bug_finalize+0x51/0xc0 [ 104.088720] [<c108ab29>] load_module+0x1429/0x18b0 We can teardown sysfs first, then to be sure, put the state in MODULE_STATE_UNFORMED so it's ignored while we deconstruct it. Reported-by: Veaceslav Falico <vfalico@redhat.com> Tested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-17 03:50:03 +00:00
/* Now we can delete it from the lists */
mutex_lock(&module_mutex);
/* Unlink carefully: kallsyms could be walking list. */
list_del_rcu(&mod->list);
mod_tree_remove(mod);
/* Remove this module from bug list, this uses list_del_rcu */
module_bug_cleanup(mod);
/* Wait for RCU-sched synchronizing before releasing mod->list and buglist. */
synchronize_rcu();
if (try_add_tainted_module(mod))
pr_err("%s: adding tainted module to the unloaded tainted modules list failed.\n",
mod->name);
module: don't unlink the module until we've removed all exposure. Otherwise we get a race between unload and reload of the same module: the new module doesn't see the old one in the list, but then fails because it can't register over the still-extant entries in sysfs: [ 103.981925] ------------[ cut here ]------------ [ 103.986902] WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xab/0xd0() [ 103.993606] Hardware name: CrownBay Platform [ 103.998075] sysfs: cannot create duplicate filename '/module/pch_gbe' [ 104.004784] Modules linked in: pch_gbe(+) [last unloaded: pch_gbe] [ 104.011362] Pid: 3021, comm: modprobe Tainted: G W 3.9.0-rc5+ #5 [ 104.018662] Call Trace: [ 104.021286] [<c103599d>] warn_slowpath_common+0x6d/0xa0 [ 104.026933] [<c1168c8b>] ? sysfs_add_one+0xab/0xd0 [ 104.031986] [<c1168c8b>] ? sysfs_add_one+0xab/0xd0 [ 104.037000] [<c1035a4e>] warn_slowpath_fmt+0x2e/0x30 [ 104.042188] [<c1168c8b>] sysfs_add_one+0xab/0xd0 [ 104.046982] [<c1168dbe>] create_dir+0x5e/0xa0 [ 104.051633] [<c1168e78>] sysfs_create_dir+0x78/0xd0 [ 104.056774] [<c1262bc3>] kobject_add_internal+0x83/0x1f0 [ 104.062351] [<c126daf6>] ? kvasprintf+0x46/0x60 [ 104.067231] [<c1262ebd>] kobject_add_varg+0x2d/0x50 [ 104.072450] [<c1262f07>] kobject_init_and_add+0x27/0x30 [ 104.078075] [<c1089240>] mod_sysfs_setup+0x80/0x540 [ 104.083207] [<c1260851>] ? module_bug_finalize+0x51/0xc0 [ 104.088720] [<c108ab29>] load_module+0x1429/0x18b0 We can teardown sysfs first, then to be sure, put the state in MODULE_STATE_UNFORMED so it's ignored while we deconstruct it. Reported-by: Veaceslav Falico <vfalico@redhat.com> Tested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-17 03:50:03 +00:00
mutex_unlock(&module_mutex);
/* This may be empty, but that's OK */
module_arch_freeing_init(mod);
kfree(mod->args);
percpu_modfree(mod);
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
free_mod_mem(mod);
}
void *__symbol_get(const char *symbol)
{
struct find_symbol_arg fsa = {
.name = symbol,
.gplok = true,
.warn = true,
};
preempt_disable();
if (!find_symbol(&fsa))
goto fail;
if (fsa.license != GPL_ONLY) {
pr_warn("failing symbol_get of non-GPLONLY symbol %s.\n",
symbol);
goto fail;
}
if (strong_try_module_get(fsa.owner))
goto fail;
preempt_enable();
return (void *)kernel_symbol_value(fsa.sym);
fail:
preempt_enable();
return NULL;
}
EXPORT_SYMBOL_GPL(__symbol_get);
/*
* Ensure that an exported symbol [global namespace] does not already exist
* in the kernel or in some other module's exported symbol table.
*
* You must hold the module_mutex.
*/
static int verify_exported_symbols(struct module *mod)
{
unsigned int i;
const struct kernel_symbol *s;
struct {
const struct kernel_symbol *sym;
unsigned int num;
} arr[] = {
{ mod->syms, mod->num_syms },
{ mod->gpl_syms, mod->num_gpl_syms },
};
for (i = 0; i < ARRAY_SIZE(arr); i++) {
for (s = arr[i].sym; s < arr[i].sym + arr[i].num; s++) {
struct find_symbol_arg fsa = {
.name = kernel_symbol_name(s),
.gplok = true,
};
if (find_symbol(&fsa)) {
pr_err("%s: exports duplicate symbol %s"
" (owned by %s)\n",
module: use relative references for __ksymtab entries An ordinary arm64 defconfig build has ~64 KB worth of __ksymtab entries, each consisting of two 64-bit fields containing absolute references, to the symbol itself and to a char array containing its name, respectively. When we build the same configuration with KASLR enabled, we end up with an additional ~192 KB of relocations in the .init section, i.e., one 24 byte entry for each absolute reference, which all need to be processed at boot time. Given how the struct kernel_symbol that describes each entry is completely local to module.c (except for the references emitted by EXPORT_SYMBOL() itself), we can easily modify it to contain two 32-bit relative references instead. This reduces the size of the __ksymtab section by 50% for all 64-bit architectures, and gets rid of the runtime relocations entirely for architectures implementing KASLR, either via standard PIE linking (arm64) or using custom host tools (x86). Note that the binary search involving __ksymtab contents relies on each section being sorted by symbol name. This is implemented based on the input section names, not the names in the ksymtab entries, so this patch does not interfere with that. Given that the use of place-relative relocations requires support both in the toolchain and in the module loader, we cannot enable this feature for all architectures. So make it dependent on whether CONFIG_HAVE_ARCH_PREL32_RELOCATIONS is defined. Link: http://lkml.kernel.org/r/20180704083651.24360-4-ard.biesheuvel@linaro.org Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jessica Yu <jeyu@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:56:09 +00:00
mod->name, kernel_symbol_name(s),
module_name(fsa.owner));
return -ENOEXEC;
}
}
}
return 0;
}
static bool ignore_undef_symbol(Elf_Half emachine, const char *name)
{
/*
* On x86, PIC code and Clang non-PIC code may have call foo@PLT. GNU as
* before 2.37 produces an unreferenced _GLOBAL_OFFSET_TABLE_ on x86-64.
* i386 has a similar problem but may not deserve a fix.
*
* If we ever have to ignore many symbols, consider refactoring the code to
* only warn if referenced by a relocation.
*/
if (emachine == EM_386 || emachine == EM_X86_64)
return !strcmp(name, "_GLOBAL_OFFSET_TABLE_");
return false;
}
/* Change all symbols so that st_value encodes the pointer directly. */
static int simplify_symbols(struct module *mod, const struct load_info *info)
{
Elf_Shdr *symsec = &info->sechdrs[info->index.sym];
Elf_Sym *sym = (void *)symsec->sh_addr;
unsigned long secbase;
unsigned int i;
int ret = 0;
const struct kernel_symbol *ksym;
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
/* Ignore common symbols */
if (!strncmp(name, "__gnu_lto", 9))
break;
/*
* We compiled with -fno-common. These are not
* supposed to happen.
*/
pr_debug("Common symbol: %s\n", name);
pr_warn("%s: please compile with -fno-common\n",
mod->name);
ret = -ENOEXEC;
break;
case SHN_ABS:
/* Don't need to do anything */
pr_debug("Absolute symbol: 0x%08lx %s\n",
(long)sym[i].st_value, name);
break;
module: preserve Elf information for livepatch modules For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-23 00:03:16 +00:00
case SHN_LIVEPATCH:
/* Livepatch symbols are resolved by livepatch */
break;
case SHN_UNDEF:
ksym = resolve_symbol_wait(mod, info, name);
/* Ok if resolved. */
if (ksym && !IS_ERR(ksym)) {
module: use relative references for __ksymtab entries An ordinary arm64 defconfig build has ~64 KB worth of __ksymtab entries, each consisting of two 64-bit fields containing absolute references, to the symbol itself and to a char array containing its name, respectively. When we build the same configuration with KASLR enabled, we end up with an additional ~192 KB of relocations in the .init section, i.e., one 24 byte entry for each absolute reference, which all need to be processed at boot time. Given how the struct kernel_symbol that describes each entry is completely local to module.c (except for the references emitted by EXPORT_SYMBOL() itself), we can easily modify it to contain two 32-bit relative references instead. This reduces the size of the __ksymtab section by 50% for all 64-bit architectures, and gets rid of the runtime relocations entirely for architectures implementing KASLR, either via standard PIE linking (arm64) or using custom host tools (x86). Note that the binary search involving __ksymtab contents relies on each section being sorted by symbol name. This is implemented based on the input section names, not the names in the ksymtab entries, so this patch does not interfere with that. Given that the use of place-relative relocations requires support both in the toolchain and in the module loader, we cannot enable this feature for all architectures. So make it dependent on whether CONFIG_HAVE_ARCH_PREL32_RELOCATIONS is defined. Link: http://lkml.kernel.org/r/20180704083651.24360-4-ard.biesheuvel@linaro.org Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jessica Yu <jeyu@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 04:56:09 +00:00
sym[i].st_value = kernel_symbol_value(ksym);
break;
}
/* Ok if weak or ignored. */
if (!ksym &&
(ELF_ST_BIND(sym[i].st_info) == STB_WEAK ||
ignore_undef_symbol(info->hdr->e_machine, name)))
break;
ret = PTR_ERR(ksym) ?: -ENOENT;
pr_warn("%s: Unknown symbol %s (err %d)\n",
mod->name, name, ret);
break;
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
return ret;
}
static int apply_relocations(struct module *mod, const struct load_info *info)
{
unsigned int i;
int err = 0;
/* Now do relocations. */
for (i = 1; i < info->hdr->e_shnum; i++) {
unsigned int infosec = info->sechdrs[i].sh_info;
/* Not a valid relocation section? */
if (infosec >= info->hdr->e_shnum)
continue;
/* Don't bother with non-allocated sections */
if (!(info->sechdrs[infosec].sh_flags & SHF_ALLOC))
continue;
module: preserve Elf information for livepatch modules For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-23 00:03:16 +00:00
if (info->sechdrs[i].sh_flags & SHF_RELA_LIVEPATCH)
livepatch: Apply vmlinux-specific KLP relocations early KLP relocations are livepatch-specific relocations which are applied to a KLP module's text or data. They exist for two reasons: 1) Unexported symbols: replacement functions often need to access unexported symbols (e.g. static functions), which "normal" relocations don't allow. 2) Late module patching: this is the ability for a KLP module to bypass normal module dependencies, such that the KLP module can be loaded *before* a to-be-patched module. This means that relocations which need to access symbols in the to-be-patched module might need to be applied to the KLP module well after it has been loaded. Non-late-patched KLP relocations are applied from the KLP module's init function. That usually works fine, unless the patched code wants to use alternatives, paravirt patching, jump tables, or some other special section which needs relocations. Then we run into ordering issues and crashes. In order for those special sections to work properly, the KLP relocations should be applied *before* the special section init code runs, such as apply_paravirt(), apply_alternatives(), or jump_label_apply_nops(). You might think the obvious solution would be to move the KLP relocation initialization earlier, but it's not necessarily that simple. The problem is the above-mentioned late module patching, for which KLP relocations can get applied well after the KLP module is loaded. To "fix" this issue in the past, we created .klp.arch sections: .klp.arch.{module}..altinstructions .klp.arch.{module}..parainstructions Those sections allow KLP late module patching code to call apply_paravirt() and apply_alternatives() after the module-specific KLP relocations (.klp.rela.{module}.{section}) have been applied. But that has a lot of drawbacks, including code complexity, the need for arch-specific code, and the (per-arch) danger that we missed some special section -- for example the __jump_table section which is used for jump labels. It turns out there's a simpler and more functional approach. There are two kinds of KLP relocation sections: 1) vmlinux-specific KLP relocation sections .klp.rela.vmlinux.{sec} These are relocations (applied to the KLP module) which reference unexported vmlinux symbols. 2) module-specific KLP relocation sections .klp.rela.{module}.{sec}: These are relocations (applied to the KLP module) which reference unexported or exported module symbols. Up until now, these have been treated the same. However, they're inherently different. Because of late module patching, module-specific KLP relocations can be applied very late, thus they can create the ordering headaches described above. But vmlinux-specific KLP relocations don't have that problem. There's nothing to prevent them from being applied earlier. So apply them at the same time as normal relocations, when the KLP module is being loaded. This means that for vmlinux-specific KLP relocations, we no longer have any ordering issues. vmlinux-referencing jump labels, alternatives, and paravirt patching will work automatically, without the need for the .klp.arch hacks. All that said, for module-specific KLP relocations, the ordering problems still exist and we *do* still need .klp.arch. Or do we? Stay tuned. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29 15:24:44 +00:00
err = klp_apply_section_relocs(mod, info->sechdrs,
info->secstrings,
info->strtab,
info->index.sym, i,
NULL);
else if (info->sechdrs[i].sh_type == SHT_REL)
err = apply_relocate(info->sechdrs, info->strtab,
info->index.sym, i, mod);
else if (info->sechdrs[i].sh_type == SHT_RELA)
err = apply_relocate_add(info->sechdrs, info->strtab,
info->index.sym, i, mod);
if (err < 0)
break;
}
return err;
}
/* Additional bytes needed by arch in front of individual sections */
unsigned int __weak arch_mod_section_prepend(struct module *mod,
unsigned int section)
{
/* default implementation just returns zero */
return 0;
}
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
long module_get_offset_and_type(struct module *mod, enum mod_mem_type type,
Elf_Shdr *sechdr, unsigned int section)
{
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
long offset;
long mask = ((unsigned long)(type) & SH_ENTSIZE_TYPE_MASK) << SH_ENTSIZE_TYPE_SHIFT;
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
mod->mem[type].size += arch_mod_section_prepend(mod, section);
offset = ALIGN(mod->mem[type].size, sechdr->sh_addralign ?: 1);
mod->mem[type].size = offset + sechdr->sh_size;
WARN_ON_ONCE(offset & mask);
return offset | mask;
}
module: Expose module_init_layout_section() module_init_layout_section() choses whether the core module loader considers a section as init or not. This affects the placement of the exit section when module unloading is disabled. This code will never run, so it can be free()d once the module has been initialised. arm and arm64 need to count the number of PLTs they need before applying relocations based on the section name. The init PLTs are stored separately so they can be free()d. arm and arm64 both use within_module_init() to decide which list of PLTs to use when applying the relocation. Because within_module_init()'s behaviour changes when module unloading is disabled, both architecture would need to take this into account when counting the PLTs. Today neither architecture does this, meaning when module unloading is disabled there are insufficient PLTs in the init section to load some modules, resulting in warnings: | WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc | Modules linked in: crct10dif_common | CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : module_emit_plt_entry+0x184/0x1cc | lr : module_emit_plt_entry+0x94/0x1cc | sp : ffffffc0803bba60 [...] | Call trace: | module_emit_plt_entry+0x184/0x1cc | apply_relocate_add+0x2bc/0x8e4 | load_module+0xe34/0x1bd4 | init_module_from_file+0x84/0xc0 | __arm64_sys_finit_module+0x1b8/0x27c | invoke_syscall.constprop.0+0x5c/0x104 | do_el0_svc+0x58/0x160 | el0_svc+0x38/0x110 | el0t_64_sync_handler+0xc0/0xc4 | el0t_64_sync+0x190/0x194 Instead of duplicating module_init_layout_section()s logic, expose it. Reported-by: Adam Johnston <adam.johnston@arm.com> Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()") Cc: stable@vger.kernel.org Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-08-01 14:54:07 +00:00
bool module_init_layout_section(const char *sname)
module: check for exit sections in layout_sections() instead of module_init_section() Previously, when CONFIG_MODULE_UNLOAD=n, the module loader just does not attempt to load exit sections since it never expects that any code in those sections will ever execute. However, dynamic code patching (alternatives, jump_label and static_call) can have sites in __exit code, even if __exit is never executed. Therefore __exit must be present at runtime, at least for as long as __init code is. Commit 33121347fb1c ("module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD") solves the requirements of jump_labels and static_calls by putting the exit sections in the init region of the module so that they are at least present at init, and discarded afterwards. It does this by including a check for exit sections in module_init_section(), so that it also returns true for exit sections, and the module loader will automatically sort them in the init region of the module. However, the solution there was not completely arch-independent. ARM is a special case where it supplies its own module_{init, exit}_section() functions. Instead of pushing the exit section checks into module_init_section(), just implement the exit section check in layout_sections(), so that we don't have to touch arch-dependent code. Fixes: 33121347fb1c ("module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD") Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-05-12 13:45:46 +00:00
{
#ifndef CONFIG_MODULE_UNLOAD
if (module_exit_section(sname))
return true;
#endif
return module_init_section(sname);
}
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
static void __layout_sections(struct module *mod, struct load_info *info, bool is_init)
{
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
unsigned int m, i;
static const unsigned long masks[][2] = {
/*
* NOTE: all executable code must be the first section
* in this array; otherwise modify the text_size
* finder in the two loops below
*/
{ SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL },
{ SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL },
{ SHF_RO_AFTER_INIT | SHF_ALLOC, ARCH_SHF_SMALL },
{ SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL },
{ ARCH_SHF_SMALL | SHF_ALLOC, 0 }
};
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
static const int core_m_to_mem_type[] = {
MOD_TEXT,
MOD_RODATA,
MOD_RO_AFTER_INIT,
MOD_DATA,
module: fix module load for ia64 Frank reported boot regression in ia64 as: ELILO v3.16 for EFI/IA-64 .. Uncompressing Linux... done Loading file AC100221.initrd.img...done [ 0.000000] Linux version 6.4.0-rc3 (root@x4270) (ia64-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Thu May 25 15:52:20 CEST 2023 [ 0.000000] efi: EFI v1.1 by HP [ 0.000000] efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fe2a000 ESI=0x3ee7b000 SMBIOS=0x3ee7c000 HCDP=0x3fe28000 [ 0.000000] PCDP: v3 at 0x3fe28000 [ 0.000000] earlycon: uart8250 at MMIO 0x00000000f4050000 (options '9600n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000003FE2A000 000028 (v02 HP ) [ 0.000000] ACPI: XSDT 0x000000003FE2A02C 0000CC (v01 HP rx2620 00000000 HP 00000000) [...] [ 3.793350] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.6-1 [ 3.951100] ------------[ cut here ]------------ [ 3.951100] WARNING: CPU: 6 PID: 140 at kernel/module/main.c:1547 __layout_sections+0x370/0x3c0 [ 3.949512] Unable to handle kernel paging request at virtual address 1000000000000000 [ 3.951100] Modules linked in: [ 3.951100] CPU: 6 PID: 140 Comm: (udev-worker) Not tainted 6.4.0-rc3 #1 [ 3.956161] (udev-worker)[142]: Oops 11003706212352 [1] [ 3.951774] Hardware name: hp server rx2620 , BIOS 04.29 11/30/2007 [ 3.951774] [ 3.951774] Call Trace: [ 3.958339] Unable to handle kernel paging request at virtual address 1000000000000000 [ 3.956161] Modules linked in: [ 3.951774] [<a0000001000156d0>] show_stack.part.0+0x30/0x60 [ 3.951774] sp=e000000183a67b20 bsp=e000000183a61628 [ 3.956161] [ 3.956161] which bisect to module_memory change [1]. Debug showed that ia64 uses some special sections: __layout_sections: section .got (sh_flags 10000002) matched to MOD_INVALID __layout_sections: section .sdata (sh_flags 10000003) matched to MOD_INVALID __layout_sections: section .sbss (sh_flags 10000003) matched to MOD_INVALID All these sections are loaded to module core memory before [1]. Fix ia64 boot by loading these sections to MOD_DATA (core rw data). [1] commit ac3b43283923 ("module: replace module_layout with module_memory") Fixes: ac3b43283923 ("module: replace module_layout with module_memory") Reported-by: Frank Scheiner <frank.scheiner@web.de> Closes: https://lists.debian.org/debian-ia64/2023/05/msg00010.html Closes: https://marc.info/?l=linux-ia64&m=168509859125505 Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Song Liu <song@kernel.org> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-05-28 23:00:41 +00:00
MOD_DATA,
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
};
static const int init_m_to_mem_type[] = {
MOD_INIT_TEXT,
MOD_INIT_RODATA,
MOD_INVALID,
MOD_INIT_DATA,
module: fix module load for ia64 Frank reported boot regression in ia64 as: ELILO v3.16 for EFI/IA-64 .. Uncompressing Linux... done Loading file AC100221.initrd.img...done [ 0.000000] Linux version 6.4.0-rc3 (root@x4270) (ia64-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Thu May 25 15:52:20 CEST 2023 [ 0.000000] efi: EFI v1.1 by HP [ 0.000000] efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fe2a000 ESI=0x3ee7b000 SMBIOS=0x3ee7c000 HCDP=0x3fe28000 [ 0.000000] PCDP: v3 at 0x3fe28000 [ 0.000000] earlycon: uart8250 at MMIO 0x00000000f4050000 (options '9600n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000003FE2A000 000028 (v02 HP ) [ 0.000000] ACPI: XSDT 0x000000003FE2A02C 0000CC (v01 HP rx2620 00000000 HP 00000000) [...] [ 3.793350] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.6-1 [ 3.951100] ------------[ cut here ]------------ [ 3.951100] WARNING: CPU: 6 PID: 140 at kernel/module/main.c:1547 __layout_sections+0x370/0x3c0 [ 3.949512] Unable to handle kernel paging request at virtual address 1000000000000000 [ 3.951100] Modules linked in: [ 3.951100] CPU: 6 PID: 140 Comm: (udev-worker) Not tainted 6.4.0-rc3 #1 [ 3.956161] (udev-worker)[142]: Oops 11003706212352 [1] [ 3.951774] Hardware name: hp server rx2620 , BIOS 04.29 11/30/2007 [ 3.951774] [ 3.951774] Call Trace: [ 3.958339] Unable to handle kernel paging request at virtual address 1000000000000000 [ 3.956161] Modules linked in: [ 3.951774] [<a0000001000156d0>] show_stack.part.0+0x30/0x60 [ 3.951774] sp=e000000183a67b20 bsp=e000000183a61628 [ 3.956161] [ 3.956161] which bisect to module_memory change [1]. Debug showed that ia64 uses some special sections: __layout_sections: section .got (sh_flags 10000002) matched to MOD_INVALID __layout_sections: section .sdata (sh_flags 10000003) matched to MOD_INVALID __layout_sections: section .sbss (sh_flags 10000003) matched to MOD_INVALID All these sections are loaded to module core memory before [1]. Fix ia64 boot by loading these sections to MOD_DATA (core rw data). [1] commit ac3b43283923 ("module: replace module_layout with module_memory") Fixes: ac3b43283923 ("module: replace module_layout with module_memory") Reported-by: Frank Scheiner <frank.scheiner@web.de> Closes: https://lists.debian.org/debian-ia64/2023/05/msg00010.html Closes: https://marc.info/?l=linux-ia64&m=168509859125505 Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Song Liu <song@kernel.org> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-05-28 23:00:41 +00:00
MOD_INIT_DATA,
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
};
for (m = 0; m < ARRAY_SIZE(masks); ++m) {
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
enum mod_mem_type type = is_init ? init_m_to_mem_type[m] : core_m_to_mem_type[m];
for (i = 0; i < info->hdr->e_shnum; ++i) {
Elf_Shdr *s = &info->sechdrs[i];
const char *sname = info->secstrings + s->sh_name;
if ((s->sh_flags & masks[m][0]) != masks[m][0]
|| (s->sh_flags & masks[m][1])
|| s->sh_entsize != ~0UL
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
|| is_init != module_init_layout_section(sname))
continue;
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
if (WARN_ON_ONCE(type == MOD_INVALID))
continue;
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
s->sh_entsize = module_get_offset_and_type(mod, type, s, i);
pr_debug("\t%s\n", sname);
}
}
}
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
/*
* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
* might -- code, read-only data, read-write data, small data. Tally
* sizes, and place the offsets into sh_entsize fields: high bit means it
* belongs in init.
*/
static void layout_sections(struct module *mod, struct load_info *info)
{
unsigned int i;
for (i = 0; i < info->hdr->e_shnum; i++)
info->sechdrs[i].sh_entsize = ~0UL;
pr_debug("Core section allocation order for %s:\n", mod->name);
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
__layout_sections(mod, info, false);
pr_debug("Init section allocation order for %s:\n", mod->name);
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
__layout_sections(mod, info, true);
}
static void module_license_taint_check(struct module *mod, const char *license)
{
if (!license)
license = "unspecified";
if (!license_is_gpl_compatible(license)) {
if (!test_taint(TAINT_PROPRIETARY_MODULE))
pr_warn("%s: module license '%s' taints kernel.\n",
mod->name, license);
add_taint_module(mod, TAINT_PROPRIETARY_MODULE,
LOCKDEP_NOW_UNRELIABLE);
}
}
static void setup_modinfo(struct module *mod, struct load_info *info)
[PATCH] modules: add version and srcversion to sysfs This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 05:05:15 +00:00
{
struct module_attribute *attr;
int i;
for (i = 0; (attr = modinfo_attrs[i]); i++) {
if (attr->setup)
attr->setup(mod, get_modinfo(info, attr->attr.name));
[PATCH] modules: add version and srcversion to sysfs This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 05:05:15 +00:00
}
}
static void free_modinfo(struct module *mod)
{
struct module_attribute *attr;
int i;
for (i = 0; (attr = modinfo_attrs[i]); i++) {
if (attr->free)
attr->free(mod);
}
}
void * __weak module_alloc(unsigned long size)
{
return __vmalloc_node_range(size, 1, VMALLOC_START, VMALLOC_END,
GFP_KERNEL, PAGE_KERNEL_EXEC, VM_FLUSH_RESET_PERMS,
NUMA_NO_NODE, __builtin_return_address(0));
}
bool __weak module_init_section(const char *name)
{
return strstarts(name, ".init");
}
bool __weak module_exit_section(const char *name)
{
return strstarts(name, ".exit");
}
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
static int validate_section_offset(struct load_info *info, Elf_Shdr *shdr)
{
#if defined(CONFIG_64BIT)
unsigned long long secend;
#else
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
unsigned long secend;
#endif
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
/*
* Check for both overflow and offset/size being
* too large.
*/
secend = shdr->sh_offset + shdr->sh_size;
if (secend < shdr->sh_offset || secend > info->len)
return -ENOEXEC;
return 0;
}
/*
* Check userspace passed ELF module against our expectations, and cache
* useful variables for further processing as we go.
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
*
* This does basic validity checks against section offsets and sizes, the
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
* section name string table, and the indices used for it (sh_name).
*
* As a last step, since we're already checking the ELF sections we cache
* useful variables which will be used later for our convenience:
*
* o pointers to section headers
* o cache the modinfo symbol section
* o cache the string symbol section
* o cache the module section
*
* As a last step we set info->mod to the temporary copy of the module in
* info->hdr. The final one will be allocated in move_module(). Any
* modifications we make to our copy of the module will be carried over
* to the final minted module.
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
*/
static int elf_validity_cache_copy(struct load_info *info, int flags)
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
{
unsigned int i;
Elf_Shdr *shdr, *strhdr;
int err;
module: add sanity check for ELF module section The ELF ".gnu.linkonce.this_module" section is special, it is what we use to construct the struct module __this_module, which THIS_MODULE points to. When userspace loads a module we always deal first with a copy of the userspace buffer, and twiddle with the userspace copy's version of the struct module. Eventually we allocate memory to do a memcpy() of that struct module, under the assumption that the module size is right. But we have no validity checks against the size or the requirements for the section. Add some validity checks for the special module section early and while at it, cache the module section index early, so we don't have to do that later. While at it, just move over the assigment of the info->mod to make the code clearer. The validity checker also adds an explicit size check to ensure the module section size matches the kernel's run time size for sizeof(struct module). This should prevent sloppy loads of modules which are built today *without* actually increasing the size of the struct module. A developer today can for example expand the size of struct module, rebuild a directoroy 'make fs/xfs/' for example and then try to insmode the driver there. That module would in effect have an incorrect size. This new size check would put a stop gap against such mistakes. This also makes the entire goal of ".gnu.linkonce.this_module" pretty clear. Before this patch verification of the goal / intent required some Indian Jones whips, torches and cleaning up big old spider webs. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-19 21:35:38 +00:00
unsigned int num_mod_secs = 0, mod_idx;
unsigned int num_info_secs = 0, info_idx;
unsigned int num_sym_secs = 0, sym_idx;
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
if (info->len < sizeof(*(info->hdr))) {
pr_err("Invalid ELF header len %lu\n", info->len);
goto no_exec;
}
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
if (memcmp(info->hdr->e_ident, ELFMAG, SELFMAG) != 0) {
pr_err("Invalid ELF header magic: != %s\n", ELFMAG);
goto no_exec;
}
if (info->hdr->e_type != ET_REL) {
pr_err("Invalid ELF header type: %u != %u\n",
info->hdr->e_type, ET_REL);
goto no_exec;
}
if (!elf_check_arch(info->hdr)) {
pr_err("Invalid architecture in ELF header: %u\n",
info->hdr->e_machine);
goto no_exec;
}
if (!module_elf_check_arch(info->hdr)) {
pr_err("Invalid module architecture in ELF header: %u\n",
info->hdr->e_machine);
goto no_exec;
}
if (info->hdr->e_shentsize != sizeof(Elf_Shdr)) {
pr_err("Invalid ELF section header size\n");
goto no_exec;
}
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
/*
* e_shnum is 16 bits, and sizeof(Elf_Shdr) is
* known and small. So e_shnum * sizeof(Elf_Shdr)
* will not overflow unsigned long on any platform.
*/
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
if (info->hdr->e_shoff >= info->len
|| (info->hdr->e_shnum * sizeof(Elf_Shdr) >
info->len - info->hdr->e_shoff)) {
pr_err("Invalid ELF section header overflow\n");
goto no_exec;
}
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
info->sechdrs = (void *)info->hdr + info->hdr->e_shoff;
/*
* Verify if the section name table index is valid.
*/
if (info->hdr->e_shstrndx == SHN_UNDEF
|| info->hdr->e_shstrndx >= info->hdr->e_shnum) {
pr_err("Invalid ELF section name index: %d || e_shstrndx (%d) >= e_shnum (%d)\n",
info->hdr->e_shstrndx, info->hdr->e_shstrndx,
info->hdr->e_shnum);
goto no_exec;
}
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
strhdr = &info->sechdrs[info->hdr->e_shstrndx];
err = validate_section_offset(info, strhdr);
if (err < 0) {
pr_err("Invalid ELF section hdr(type %u)\n", strhdr->sh_type);
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
return err;
}
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
/*
* The section name table must be NUL-terminated, as required
* by the spec. This makes strcmp and pr_* calls that access
* strings in the section safe.
*/
info->secstrings = (void *)info->hdr + strhdr->sh_offset;
if (strhdr->sh_size == 0) {
pr_err("empty section name table\n");
goto no_exec;
}
if (info->secstrings[strhdr->sh_size - 1] != '\0') {
pr_err("ELF Spec violation: section name table isn't null terminated\n");
goto no_exec;
}
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
/*
* The code assumes that section 0 has a length of zero and
* an addr of zero, so check for it.
*/
if (info->sechdrs[0].sh_type != SHT_NULL
|| info->sechdrs[0].sh_size != 0
|| info->sechdrs[0].sh_addr != 0) {
pr_err("ELF Spec violation: section 0 type(%d)!=SH_NULL or non-zero len or addr\n",
info->sechdrs[0].sh_type);
goto no_exec;
}
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
for (i = 1; i < info->hdr->e_shnum; i++) {
shdr = &info->sechdrs[i];
switch (shdr->sh_type) {
case SHT_NULL:
case SHT_NOBITS:
continue;
case SHT_SYMTAB:
if (shdr->sh_link == SHN_UNDEF
|| shdr->sh_link >= info->hdr->e_shnum) {
pr_err("Invalid ELF sh_link!=SHN_UNDEF(%d) or (sh_link(%d) >= hdr->e_shnum(%d)\n",
shdr->sh_link, shdr->sh_link,
info->hdr->e_shnum);
goto no_exec;
}
num_sym_secs++;
sym_idx = i;
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
fallthrough;
default:
err = validate_section_offset(info, shdr);
if (err < 0) {
pr_err("Invalid ELF section in module (section %u type %u)\n",
i, shdr->sh_type);
return err;
}
module: add sanity check for ELF module section The ELF ".gnu.linkonce.this_module" section is special, it is what we use to construct the struct module __this_module, which THIS_MODULE points to. When userspace loads a module we always deal first with a copy of the userspace buffer, and twiddle with the userspace copy's version of the struct module. Eventually we allocate memory to do a memcpy() of that struct module, under the assumption that the module size is right. But we have no validity checks against the size or the requirements for the section. Add some validity checks for the special module section early and while at it, cache the module section index early, so we don't have to do that later. While at it, just move over the assigment of the info->mod to make the code clearer. The validity checker also adds an explicit size check to ensure the module section size matches the kernel's run time size for sizeof(struct module). This should prevent sloppy loads of modules which are built today *without* actually increasing the size of the struct module. A developer today can for example expand the size of struct module, rebuild a directoroy 'make fs/xfs/' for example and then try to insmode the driver there. That module would in effect have an incorrect size. This new size check would put a stop gap against such mistakes. This also makes the entire goal of ".gnu.linkonce.this_module" pretty clear. Before this patch verification of the goal / intent required some Indian Jones whips, torches and cleaning up big old spider webs. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-19 21:35:38 +00:00
if (strcmp(info->secstrings + shdr->sh_name,
".gnu.linkonce.this_module") == 0) {
num_mod_secs++;
mod_idx = i;
} else if (strcmp(info->secstrings + shdr->sh_name,
".modinfo") == 0) {
num_info_secs++;
info_idx = i;
module: add sanity check for ELF module section The ELF ".gnu.linkonce.this_module" section is special, it is what we use to construct the struct module __this_module, which THIS_MODULE points to. When userspace loads a module we always deal first with a copy of the userspace buffer, and twiddle with the userspace copy's version of the struct module. Eventually we allocate memory to do a memcpy() of that struct module, under the assumption that the module size is right. But we have no validity checks against the size or the requirements for the section. Add some validity checks for the special module section early and while at it, cache the module section index early, so we don't have to do that later. While at it, just move over the assigment of the info->mod to make the code clearer. The validity checker also adds an explicit size check to ensure the module section size matches the kernel's run time size for sizeof(struct module). This should prevent sloppy loads of modules which are built today *without* actually increasing the size of the struct module. A developer today can for example expand the size of struct module, rebuild a directoroy 'make fs/xfs/' for example and then try to insmode the driver there. That module would in effect have an incorrect size. This new size check would put a stop gap against such mistakes. This also makes the entire goal of ".gnu.linkonce.this_module" pretty clear. Before this patch verification of the goal / intent required some Indian Jones whips, torches and cleaning up big old spider webs. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-19 21:35:38 +00:00
}
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
if (shdr->sh_flags & SHF_ALLOC) {
if (shdr->sh_name >= strhdr->sh_size) {
pr_err("Invalid ELF section name in module (section %u type %u)\n",
i, shdr->sh_type);
return -ENOEXEC;
}
}
break;
}
}
if (num_info_secs > 1) {
pr_err("Only one .modinfo section must exist.\n");
goto no_exec;
} else if (num_info_secs == 1) {
/* Try to find a name early so we can log errors with a module name */
info->index.info = info_idx;
info->name = get_modinfo(info, "name");
}
if (num_sym_secs != 1) {
pr_warn("%s: module has no symbols (stripped?)\n",
info->name ?: "(missing .modinfo section or name field)");
goto no_exec;
}
/* Sets internal symbols and strings. */
info->index.sym = sym_idx;
shdr = &info->sechdrs[sym_idx];
info->index.str = shdr->sh_link;
info->strtab = (char *)info->hdr + info->sechdrs[info->index.str].sh_offset;
module: add sanity check for ELF module section The ELF ".gnu.linkonce.this_module" section is special, it is what we use to construct the struct module __this_module, which THIS_MODULE points to. When userspace loads a module we always deal first with a copy of the userspace buffer, and twiddle with the userspace copy's version of the struct module. Eventually we allocate memory to do a memcpy() of that struct module, under the assumption that the module size is right. But we have no validity checks against the size or the requirements for the section. Add some validity checks for the special module section early and while at it, cache the module section index early, so we don't have to do that later. While at it, just move over the assigment of the info->mod to make the code clearer. The validity checker also adds an explicit size check to ensure the module section size matches the kernel's run time size for sizeof(struct module). This should prevent sloppy loads of modules which are built today *without* actually increasing the size of the struct module. A developer today can for example expand the size of struct module, rebuild a directoroy 'make fs/xfs/' for example and then try to insmode the driver there. That module would in effect have an incorrect size. This new size check would put a stop gap against such mistakes. This also makes the entire goal of ".gnu.linkonce.this_module" pretty clear. Before this patch verification of the goal / intent required some Indian Jones whips, torches and cleaning up big old spider webs. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-19 21:35:38 +00:00
/*
* The ".gnu.linkonce.this_module" ELF section is special. It is
* what modpost uses to refer to __this_module and let's use rely
* on THIS_MODULE to point to &__this_module properly. The kernel's
* modpost declares it on each modules's *.mod.c file. If the struct
* module of the kernel changes a full kernel rebuild is required.
*
* We have a few expectaions for this special section, the following
* code validates all this for us:
*
* o Only one section must exist
* o We expect the kernel to always have to allocate it: SHF_ALLOC
* o The section size must match the kernel's run time's struct module
* size
*/
if (num_mod_secs != 1) {
pr_err("module %s: Only one .gnu.linkonce.this_module section must exist.\n",
info->name ?: "(missing .modinfo section or name field)");
module: add sanity check for ELF module section The ELF ".gnu.linkonce.this_module" section is special, it is what we use to construct the struct module __this_module, which THIS_MODULE points to. When userspace loads a module we always deal first with a copy of the userspace buffer, and twiddle with the userspace copy's version of the struct module. Eventually we allocate memory to do a memcpy() of that struct module, under the assumption that the module size is right. But we have no validity checks against the size or the requirements for the section. Add some validity checks for the special module section early and while at it, cache the module section index early, so we don't have to do that later. While at it, just move over the assigment of the info->mod to make the code clearer. The validity checker also adds an explicit size check to ensure the module section size matches the kernel's run time size for sizeof(struct module). This should prevent sloppy loads of modules which are built today *without* actually increasing the size of the struct module. A developer today can for example expand the size of struct module, rebuild a directoroy 'make fs/xfs/' for example and then try to insmode the driver there. That module would in effect have an incorrect size. This new size check would put a stop gap against such mistakes. This also makes the entire goal of ".gnu.linkonce.this_module" pretty clear. Before this patch verification of the goal / intent required some Indian Jones whips, torches and cleaning up big old spider webs. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-19 21:35:38 +00:00
goto no_exec;
}
shdr = &info->sechdrs[mod_idx];
/*
* This is already implied on the switch above, however let's be
* pedantic about it.
*/
if (shdr->sh_type == SHT_NOBITS) {
pr_err("module %s: .gnu.linkonce.this_module section must have a size set\n",
info->name ?: "(missing .modinfo section or name field)");
module: add sanity check for ELF module section The ELF ".gnu.linkonce.this_module" section is special, it is what we use to construct the struct module __this_module, which THIS_MODULE points to. When userspace loads a module we always deal first with a copy of the userspace buffer, and twiddle with the userspace copy's version of the struct module. Eventually we allocate memory to do a memcpy() of that struct module, under the assumption that the module size is right. But we have no validity checks against the size or the requirements for the section. Add some validity checks for the special module section early and while at it, cache the module section index early, so we don't have to do that later. While at it, just move over the assigment of the info->mod to make the code clearer. The validity checker also adds an explicit size check to ensure the module section size matches the kernel's run time size for sizeof(struct module). This should prevent sloppy loads of modules which are built today *without* actually increasing the size of the struct module. A developer today can for example expand the size of struct module, rebuild a directoroy 'make fs/xfs/' for example and then try to insmode the driver there. That module would in effect have an incorrect size. This new size check would put a stop gap against such mistakes. This also makes the entire goal of ".gnu.linkonce.this_module" pretty clear. Before this patch verification of the goal / intent required some Indian Jones whips, torches and cleaning up big old spider webs. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-19 21:35:38 +00:00
goto no_exec;
}
if (!(shdr->sh_flags & SHF_ALLOC)) {
pr_err("module %s: .gnu.linkonce.this_module must occupy memory during process execution\n",
info->name ?: "(missing .modinfo section or name field)");
module: add sanity check for ELF module section The ELF ".gnu.linkonce.this_module" section is special, it is what we use to construct the struct module __this_module, which THIS_MODULE points to. When userspace loads a module we always deal first with a copy of the userspace buffer, and twiddle with the userspace copy's version of the struct module. Eventually we allocate memory to do a memcpy() of that struct module, under the assumption that the module size is right. But we have no validity checks against the size or the requirements for the section. Add some validity checks for the special module section early and while at it, cache the module section index early, so we don't have to do that later. While at it, just move over the assigment of the info->mod to make the code clearer. The validity checker also adds an explicit size check to ensure the module section size matches the kernel's run time size for sizeof(struct module). This should prevent sloppy loads of modules which are built today *without* actually increasing the size of the struct module. A developer today can for example expand the size of struct module, rebuild a directoroy 'make fs/xfs/' for example and then try to insmode the driver there. That module would in effect have an incorrect size. This new size check would put a stop gap against such mistakes. This also makes the entire goal of ".gnu.linkonce.this_module" pretty clear. Before this patch verification of the goal / intent required some Indian Jones whips, torches and cleaning up big old spider webs. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-19 21:35:38 +00:00
goto no_exec;
}
if (shdr->sh_size != sizeof(struct module)) {
pr_err("module %s: .gnu.linkonce.this_module section size must match the kernel's built struct module size at run time\n",
info->name ?: "(missing .modinfo section or name field)");
module: add sanity check for ELF module section The ELF ".gnu.linkonce.this_module" section is special, it is what we use to construct the struct module __this_module, which THIS_MODULE points to. When userspace loads a module we always deal first with a copy of the userspace buffer, and twiddle with the userspace copy's version of the struct module. Eventually we allocate memory to do a memcpy() of that struct module, under the assumption that the module size is right. But we have no validity checks against the size or the requirements for the section. Add some validity checks for the special module section early and while at it, cache the module section index early, so we don't have to do that later. While at it, just move over the assigment of the info->mod to make the code clearer. The validity checker also adds an explicit size check to ensure the module section size matches the kernel's run time size for sizeof(struct module). This should prevent sloppy loads of modules which are built today *without* actually increasing the size of the struct module. A developer today can for example expand the size of struct module, rebuild a directoroy 'make fs/xfs/' for example and then try to insmode the driver there. That module would in effect have an incorrect size. This new size check would put a stop gap against such mistakes. This also makes the entire goal of ".gnu.linkonce.this_module" pretty clear. Before this patch verification of the goal / intent required some Indian Jones whips, torches and cleaning up big old spider webs. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-19 21:35:38 +00:00
goto no_exec;
}
info->index.mod = mod_idx;
/* This is temporary: point mod into copy of data. */
info->mod = (void *)info->hdr + shdr->sh_offset;
/*
* If we didn't load the .modinfo 'name' field earlier, fall back to
* on-disk struct mod 'name' field.
*/
if (!info->name)
info->name = info->mod->name;
if (flags & MODULE_INIT_IGNORE_MODVERSIONS)
info->index.vers = 0; /* Pretend no __versions section! */
else
info->index.vers = find_sec(info, "__versions");
info->index.pcpu = find_pcpusec(info);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
return 0;
no_exec:
return -ENOEXEC;
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
}
#define COPY_CHUNK_SIZE (16*PAGE_SIZE)
static int copy_chunked_from_user(void *dst, const void __user *usrc, unsigned long len)
{
do {
unsigned long n = min(len, COPY_CHUNK_SIZE);
if (copy_from_user(dst, usrc, n) != 0)
return -EFAULT;
cond_resched();
dst += n;
usrc += n;
len -= n;
} while (len);
return 0;
}
static int check_modinfo_livepatch(struct module *mod, struct load_info *info)
module: preserve Elf information for livepatch modules For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-23 00:03:16 +00:00
{
if (!get_modinfo(info, "livepatch"))
/* Nothing more to do */
return 0;
if (set_livepatch_module(mod))
return 0;
module: preserve Elf information for livepatch modules For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-23 00:03:16 +00:00
pr_err("%s: module is marked as livepatch module, but livepatch support is disabled",
mod->name);
return -ENOEXEC;
module: preserve Elf information for livepatch modules For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-23 00:03:16 +00:00
}
static void check_modinfo_retpoline(struct module *mod, struct load_info *info)
{
if (retpoline_module_ok(get_modinfo(info, "retpoline")))
return;
pr_warn("%s: loading module not compiled with retpoline compiler.\n",
mod->name);
}
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
/* Sets info->hdr and info->len. */
static int copy_module_from_user(const void __user *umod, unsigned long len,
struct load_info *info)
{
int err;
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
info->len = len;
if (info->len < sizeof(*(info->hdr)))
return -ENOEXEC;
err = security_kernel_load_data(LOADING_MODULE, true);
if (err)
return err;
/* Suck in entire file: we'll want most of it. */
2020-06-02 04:51:40 +00:00
info->hdr = __vmalloc(info->len, GFP_KERNEL | __GFP_NOWARN);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
if (!info->hdr)
return -ENOMEM;
if (copy_chunked_from_user(info->hdr, umod, info->len) != 0) {
err = -EFAULT;
goto out;
}
err = security_kernel_post_load_data((char *)info->hdr, info->len,
LOADING_MODULE, "init_module");
out:
if (err)
vfree(info->hdr);
return err;
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
}
static void free_copy(struct load_info *info, int flags)
{
if (flags & MODULE_INIT_COMPRESSED_FILE)
module_decompress_cleanup(info);
else
vfree(info->hdr);
}
static int rewrite_section_headers(struct load_info *info, int flags)
{
unsigned int i;
/* This should always be true, but let's be sure. */
info->sechdrs[0].sh_addr = 0;
for (i = 1; i < info->hdr->e_shnum; i++) {
Elf_Shdr *shdr = &info->sechdrs[i];
/*
* Mark all sections sh_addr with their address in the
* temporary image.
*/
shdr->sh_addr = (size_t)info->hdr + shdr->sh_offset;
}
/* Track but don't keep modinfo and version sections. */
info->sechdrs[info->index.vers].sh_flags &= ~(unsigned long)SHF_ALLOC;
info->sechdrs[info->index.info].sh_flags &= ~(unsigned long)SHF_ALLOC;
return 0;
}
/*
* These calls taint the kernel depending certain module circumstances */
static void module_augment_kernel_taints(struct module *mod, struct load_info *info)
{
int prev_taint = test_taint(TAINT_PROPRIETARY_MODULE);
if (!get_modinfo(info, "intree")) {
if (!test_taint(TAINT_OOT_MODULE))
pr_warn("%s: loading out-of-tree module taints kernel.\n",
mod->name);
add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
}
check_modinfo_retpoline(mod, info);
if (get_modinfo(info, "staging")) {
add_taint_module(mod, TAINT_CRAP, LOCKDEP_STILL_OK);
pr_warn("%s: module is from the staging directory, the quality "
"is unknown, you have been warned.\n", mod->name);
}
if (is_livepatch_module(mod)) {
add_taint_module(mod, TAINT_LIVEPATCH, LOCKDEP_STILL_OK);
pr_notice_once("%s: tainting kernel with TAINT_LIVEPATCH\n",
mod->name);
}
module_license_taint_check(mod, get_modinfo(info, "license"));
if (get_modinfo(info, "test")) {
if (!test_taint(TAINT_TEST))
pr_warn("%s: loading test module taints kernel.\n",
mod->name);
add_taint_module(mod, TAINT_TEST, LOCKDEP_STILL_OK);
}
#ifdef CONFIG_MODULE_SIG
mod->sig_ok = info->sig_ok;
if (!mod->sig_ok) {
pr_notice_once("%s: module verification failed: signature "
"and/or required key missing - tainting "
"kernel\n", mod->name);
add_taint_module(mod, TAINT_UNSIGNED_MODULE, LOCKDEP_STILL_OK);
}
#endif
/*
* ndiswrapper is under GPL by itself, but loads proprietary modules.
* Don't use add_taint_module(), as it would prevent ndiswrapper from
* using GPL-only symbols it needs.
*/
if (strcmp(mod->name, "ndiswrapper") == 0)
add_taint(TAINT_PROPRIETARY_MODULE, LOCKDEP_NOW_UNRELIABLE);
/* driverloader was caught wrongly pretending to be under GPL */
if (strcmp(mod->name, "driverloader") == 0)
add_taint_module(mod, TAINT_PROPRIETARY_MODULE,
LOCKDEP_NOW_UNRELIABLE);
/* lve claims to be GPL but upstream won't provide source */
if (strcmp(mod->name, "lve") == 0)
add_taint_module(mod, TAINT_PROPRIETARY_MODULE,
LOCKDEP_NOW_UNRELIABLE);
if (!prev_taint && test_taint(TAINT_PROPRIETARY_MODULE))
pr_warn("%s: module license taints kernel.\n", mod->name);
}
static int check_modinfo(struct module *mod, struct load_info *info, int flags)
{
const char *modmagic = get_modinfo(info, "vermagic");
int err;
if (flags & MODULE_INIT_IGNORE_VERMAGIC)
modmagic = NULL;
/* This is allowed: modprobe --force will invalidate it. */
if (!modmagic) {
err = try_to_force_load(mod, "bad vermagic");
if (err)
return err;
} else if (!same_magic(modmagic, vermagic, info->index.vers)) {
pr_err("%s: version magic '%s' should be '%s'\n",
info->name, modmagic, vermagic);
return -ENOEXEC;
}
err = check_modinfo_livepatch(mod, info);
if (err)
return err;
return 0;
}
static int find_module_sections(struct module *mod, struct load_info *info)
{
mod->kp = section_objs(info, "__param",
sizeof(*mod->kp), &mod->num_kp);
mod->syms = section_objs(info, "__ksymtab",
sizeof(*mod->syms), &mod->num_syms);
mod->crcs = section_addr(info, "__kcrctab");
mod->gpl_syms = section_objs(info, "__ksymtab_gpl",
sizeof(*mod->gpl_syms),
&mod->num_gpl_syms);
mod->gpl_crcs = section_addr(info, "__kcrctab_gpl");
#ifdef CONFIG_CONSTRUCTORS
mod->ctors = section_objs(info, ".ctors",
sizeof(*mod->ctors), &mod->num_ctors);
if (!mod->ctors)
mod->ctors = section_objs(info, ".init_array",
sizeof(*mod->ctors), &mod->num_ctors);
else if (find_sec(info, ".init_array")) {
/*
* This shouldn't happen with same compiler and binutils
* building all parts of the module.
*/
pr_warn("%s: has both .ctors and .init_array.\n",
mod->name);
return -EINVAL;
}
#endif
mod->noinstr_text_start = section_objs(info, ".noinstr.text", 1,
&mod->noinstr_text_size);
#ifdef CONFIG_TRACEPOINTS
tracepoints: Fix section alignment using pointer array Make the tracepoints more robust, making them solid enough to handle compiler changes by not relying on anything based on compiler-specific behavior with respect to structure alignment. Implement an approach proposed by David Miller: use an array of const pointers to refer to the individual structures, and export this pointer array through the linker script rather than the structures per se. It will consume 32 extra bytes per tracepoint (24 for structure padding and 8 for the pointers), but are less likely to break due to compiler changes. History: commit 7e066fb8 tracepoints: add DECLARE_TRACE() and DEFINE_TRACE() added the aligned(32) type and variable attribute to the tracepoint structures to deal with gcc happily aligning statically defined structures on 32-byte multiples. One attempt was to use a 8-byte alignment for tracepoint structures by applying both the variable and type attribute to tracepoint structures definitions and declarations. It worked fine with gcc 4.5.1, but broke with gcc 4.4.4 and 4.4.5. The reason is that the "aligned" attribute only specify the _minimum_ alignment for a structure, leaving both the compiler and the linker free to align on larger multiples. Because tracepoint.c expects the structures to be placed as an array within each section, up-alignment cause NULL-pointer exceptions due to the extra unexpected padding. (this patch applies on top of -tip) Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: David S. Miller <davem@davemloft.net> LKML-Reference: <20110126222622.GA10794@Krystal> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Ingo Molnar <mingo@elte.hu> CC: Thomas Gleixner <tglx@linutronix.de> CC: Andrew Morton <akpm@linux-foundation.org> CC: Peter Zijlstra <peterz@infradead.org> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-01-26 22:26:22 +00:00
mod->tracepoints_ptrs = section_objs(info, "__tracepoints_ptrs",
sizeof(*mod->tracepoints_ptrs),
&mod->num_tracepoints);
#endif
srcu: Allocate per-CPU data for DEFINE_SRCU() in modules Adding DEFINE_SRCU() or DEFINE_STATIC_SRCU() to a loadable module requires that the size of the reserved region be increased, which is not something we want to be doing all that often. One approach would be to require that loadable modules define an srcu_struct and invoke init_srcu_struct() from their module_init function and cleanup_srcu_struct() from their module_exit function. However, this is more than a bit user unfriendly. This commit therefore creates an ___srcu_struct_ptrs linker section, and pointers to srcu_struct structures created by DEFINE_SRCU() and DEFINE_STATIC_SRCU() within a module are placed into that module's ___srcu_struct_ptrs section. The required init_srcu_struct() and cleanup_srcu_struct() functions are then automatically invoked as needed when that module is loaded and unloaded, thus allowing modules to continue to use DEFINE_SRCU() and DEFINE_STATIC_SRCU() while avoiding the need to increase the size of the reserved region. Many of the algorithms and some of the code was cheerfully cherry-picked from other code making use of linker sections, perhaps most notably from tracepoints. All bugs are nevertheless the sole property of the author. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> [ paulmck: Use __section() and use "default" in srcu_module_notify()'s "switch" statement as suggested by Joel Fernandes. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2019-04-05 23:15:00 +00:00
#ifdef CONFIG_TREE_SRCU
mod->srcu_struct_ptrs = section_objs(info, "___srcu_struct_ptrs",
sizeof(*mod->srcu_struct_ptrs),
&mod->num_srcu_structs);
#endif
#ifdef CONFIG_BPF_EVENTS
mod->bpf_raw_events = section_objs(info, "__bpf_raw_tp_map",
sizeof(*mod->bpf_raw_events),
&mod->num_bpf_raw_events);
#endif
#ifdef CONFIG_DEBUG_INFO_BTF_MODULES
mod->btf_data = any_section_objs(info, ".BTF", 1, &mod->btf_data_size);
#endif
#ifdef CONFIG_JUMP_LABEL
mod->jump_entries = section_objs(info, "__jump_table",
sizeof(*mod->jump_entries),
&mod->num_jump_entries);
#endif
#ifdef CONFIG_EVENT_TRACING
mod->trace_events = section_objs(info, "_ftrace_events",
sizeof(*mod->trace_events),
&mod->num_trace_events);
mod->trace_evals = section_objs(info, "_ftrace_eval_map",
sizeof(*mod->trace_evals),
&mod->num_trace_evals);
#endif
tracing: Fix module use of trace_bprintk() On use of trace_printk() there's a macro that determines if the format is static or a variable. If it is static, it defaults to __trace_bprintk() otherwise it uses __trace_printk(). A while ago, Lai Jiangshan added __trace_bprintk(). In that patch, we discussed a way to allow modules to use it. The difference between __trace_bprintk() and __trace_printk() is that for faster processing, just the format and args are stored in the trace instead of running it through a sprintf function. In order to do this, the format used by the __trace_bprintk() had to be persistent. See commit 1ba28e02a18cbdbea123836f6c98efb09cbf59ec The problem comes with trace_bprintk() where the module is unloaded. The pointer left in the buffer is still pointing to the format. To solve this issue, the formats in the module were copied into kernel core. If the same format was used, they would use the same copy (to prevent memory leak). This all worked well until we tried to merge everything. At the time this was written, Lai Jiangshan, Frederic Weisbecker, Ingo Molnar and myself were all touching the same code. When this was merged, we lost the part of it that was in module.c. This kept out the copying of the formats and unloading the module could cause bad pointers left in the ring buffer. This patch adds back (with updates required for current kernel) the module code that sets up the necessary pointers. Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-11 03:19:24 +00:00
#ifdef CONFIG_TRACING
mod->trace_bprintk_fmt_start = section_objs(info, "__trace_printk_fmt",
sizeof(*mod->trace_bprintk_fmt_start),
&mod->num_trace_bprintk_fmt);
#endif
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
/* sechdrs[0].sh_size is always zero */
module/ftrace: handle patchable-function-entry When using patchable-function-entry, the compiler will record the callsites into a section named "__patchable_function_entries" rather than "__mcount_loc". Let's abstract this difference behind a new FTRACE_CALLSITE_SECTION, so that architectures don't have to handle this explicitly (e.g. with custom module linker scripts). As parisc currently handles this explicitly, it is fixed up accordingly, with its custom linker script removed. Since FTRACE_CALLSITE_SECTION is only defined when DYNAMIC_FTRACE is selected, the parisc module loading code is updated to only use the definition in that case. When DYNAMIC_FTRACE is not selected, modules shouldn't have this section, so this removes some redundant work in that case. To make sure that this is keep up-to-date for modules and the main kernel, a comment is added to vmlinux.lds.h, with the existing ifdeffery simplified for legibility. I built parisc generic-{32,64}bit_defconfig with DYNAMIC_FTRACE enabled, and verified that the section made it into the .ko files for modules. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Helge Deller <deller@gmx.de> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Torsten Duwe <duwe@suse.de> Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Tested-by: Sven Schnelle <svens@stackframe.org> Tested-by: Torsten Duwe <duwe@suse.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: linux-parisc@vger.kernel.org
2019-10-16 17:17:11 +00:00
mod->ftrace_callsites = section_objs(info, FTRACE_CALLSITE_SECTION,
sizeof(*mod->ftrace_callsites),
&mod->num_ftrace_callsites);
#endif
#ifdef CONFIG_FUNCTION_ERROR_INJECTION
mod->ei_funcs = section_objs(info, "_error_injection_whitelist",
sizeof(*mod->ei_funcs),
&mod->num_ei_funcs);
#endif
#ifdef CONFIG_KPROBES
mod->kprobes_text_start = section_objs(info, ".kprobes.text", 1,
&mod->kprobes_text_size);
mod->kprobe_blacklist = section_objs(info, "_kprobe_blacklist",
sizeof(unsigned long),
&mod->num_kprobe_blacklist);
#endif
printk: Userspace format indexing support We have a number of systems industry-wide that have a subset of their functionality that works as follows: 1. Receive a message from local kmsg, serial console, or netconsole; 2. Apply a set of rules to classify the message; 3. Do something based on this classification (like scheduling a remediation for the machine), rinse, and repeat. As a couple of examples of places we have this implemented just inside Facebook, although this isn't a Facebook-specific problem, we have this inside our netconsole processing (for alarm classification), and as part of our machine health checking. We use these messages to determine fairly important metrics around production health, and it's important that we get them right. While for some kinds of issues we have counters, tracepoints, or metrics with a stable interface which can reliably indicate the issue, in order to react to production issues quickly we need to work with the interface which most kernel developers naturally use when developing: printk. Most production issues come from unexpected phenomena, and as such usually the code in question doesn't have easily usable tracepoints or other counters available for the specific problem being mitigated. We have a number of lines of monitoring defence against problems in production (host metrics, process metrics, service metrics, etc), and where it's not feasible to reliably monitor at another level, this kind of pragmatic netconsole monitoring is essential. As one would expect, monitoring using printk is rather brittle for a number of reasons -- most notably that the message might disappear entirely in a new version of the kernel, or that the message may change in some way that the regex or other classification methods start to silently fail. One factor that makes this even harder is that, under normal operation, many of these messages are never expected to be hit. For example, there may be a rare hardware bug which one wants to detect if it was to ever happen again, but its recurrence is not likely or anticipated. This precludes using something like checking whether the printk in question was printed somewhere fleetwide recently to determine whether the message in question is still present or not, since we don't anticipate that it should be printed anywhere, but still need to monitor for its future presence in the long-term. This class of issue has happened on a number of occasions, causing unhealthy machines with hardware issues to remain in production for longer than ideal. As a recent example, some monitoring around blk_update_request fell out of date and caused semi-broken machines to remain in production for longer than would be desirable. Searching through the codebase to find the message is also extremely fragile, because many of the messages are further constructed beyond their callsite (eg. btrfs_printk and other module-specific wrappers, each with their own functionality). Even if they aren't, guessing the format and formulation of the underlying message based on the aesthetics of the message emitted is not a recipe for success at scale, and our previous issues with fleetwide machine health checking demonstrate as much. This provides a solution to the issue of silently changed or deleted printks: we record pointers to all printk format strings known at compile time into a new .printk_index section, both in vmlinux and modules. At runtime, this can then be iterated by looking at <debugfs>/printk/index/<module>, which emits the following format, both readable by humans and able to be parsed by machines: $ head -1 vmlinux; shuf -n 5 vmlinux # <level[,flags]> filename:line function "format" <5> block/blk-settings.c:661 disk_stack_limits "%s: Warning: Device %s is misaligned\n" <4> kernel/trace/trace.c:8296 trace_create_file "Could not create tracefs '%s' entry\n" <6> arch/x86/kernel/hpet.c:144 _hpet_print_config "hpet: %s(%d):\n" <6> init/do_mounts.c:605 prepare_namespace "Waiting for root device %s...\n" <6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n" This mitigates the majority of cases where we have a highly-specific printk which we want to match on, as we can now enumerate and check whether the format changed or the printk callsite disappeared entirely in userspace. This allows us to catch changes to printks we monitor earlier and decide what to do about it before it becomes problematic. There is no additional runtime cost for printk callers or printk itself, and the assembly generated is exactly the same. Signed-off-by: Chris Down <chris@chrisdown.name> Cc: Petr Mladek <pmladek@suse.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kees Cook <keescook@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Jessica Yu <jeyu@kernel.org> # for module.{c,h} Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/e42070983637ac5e384f17fbdbe86d19c7b212a5.1623775748.git.chris@chrisdown.name
2021-06-15 16:52:53 +00:00
#ifdef CONFIG_PRINTK_INDEX
mod->printk_index_start = section_objs(info, ".printk_index",
sizeof(*mod->printk_index_start),
&mod->printk_index_size);
#endif
#ifdef CONFIG_HAVE_STATIC_CALL_INLINE
mod->static_call_sites = section_objs(info, ".static_call_sites",
sizeof(*mod->static_call_sites),
&mod->num_static_call_sites);
#endif
#if IS_ENABLED(CONFIG_KUNIT)
mod->kunit_suites = section_objs(info, ".kunit_test_suites",
sizeof(*mod->kunit_suites),
&mod->num_kunit_suites);
mod->kunit_init_suites = section_objs(info, ".kunit_init_test_suites",
sizeof(*mod->kunit_init_suites),
&mod->num_kunit_init_suites);
#endif
mod->extable = section_objs(info, "__ex_table",
sizeof(*mod->extable), &mod->num_exentries);
if (section_addr(info, "__obsparm"))
pr_warn("%s: Ignoring obsolete parameters\n", mod->name);
dyndbg: use the module notifier callbacks Bring dynamic debug in line with other subsystems by using the module notifier callbacks. This results in a net decrease in core module code. Additionally, Jim Cromie has a new dynamic debug classmap feature, which requires that jump labels be initialized prior to dynamic debug. Specifically, the new feature toggles a jump label from the existing dynamic_debug_setup() function. However, this does not currently work properly, because jump labels are initialized via the 'module_notify_list' notifier chain, which is invoked after the current call to dynamic_debug_setup(). Thus, this patch ensures that jump labels are initialized prior to dynamic debug by setting the dynamic debug notifier priority to 0, while jump labels have the higher priority of 1. Tested by Jim using his new test case, and I've verfied the correct printing via: # modprobe test_dynamic_debug dyndbg. Link: https://lore.kernel.org/lkml/20230113193016.749791-21-jim.cromie@gmail.com/ Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202302190427.9iIK2NfJ-lkp@intel.com/ Tested-by: Jim Cromie <jim.cromie@gmail.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> CC: Jim Cromie <jim.cromie@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-03 16:50:56 +00:00
#ifdef CONFIG_DYNAMIC_DEBUG_CORE
mod->dyndbg_info.descs = section_objs(info, "__dyndbg",
sizeof(*mod->dyndbg_info.descs),
&mod->dyndbg_info.num_descs);
mod->dyndbg_info.classes = section_objs(info, "__dyndbg_classes",
sizeof(*mod->dyndbg_info.classes),
&mod->dyndbg_info.num_classes);
#endif
return 0;
}
static int move_module(struct module *mod, struct load_info *info)
{
int i;
void *ptr;
enum mod_mem_type t = 0;
int ret = -ENOMEM;
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
for_each_mod_mem_type(type) {
if (!mod->mem[type].size) {
mod->mem[type].base = NULL;
continue;
}
mod->mem[type].size = PAGE_ALIGN(mod->mem[type].size);
ptr = module_memory_alloc(mod->mem[type].size, type);
/*
* The pointer to these blocks of memory are stored on the module
* structure and we keep that around so long as the module is
* around. We only free that memory when we unload the module.
* Just mark them as not being a leak then. The .init* ELF
* sections *do* get freed after boot so we *could* treat them
* slightly differently with kmemleak_ignore() and only grey
* them out as they work as typical memory allocations which
* *do* eventually get freed, but let's just keep things simple
* and avoid *any* false positives.
*/
kmemleak_not_leak(ptr);
if (!ptr) {
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
t = type;
goto out_enomem;
}
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
memset(ptr, 0, mod->mem[type].size);
mod->mem[type].base = ptr;
}
/* Transfer each section which specifies SHF_ALLOC */
pr_debug("Final section addresses for %s:\n", mod->name);
for (i = 0; i < info->hdr->e_shnum; i++) {
void *dest;
Elf_Shdr *shdr = &info->sechdrs[i];
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
enum mod_mem_type type = shdr->sh_entsize >> SH_ENTSIZE_TYPE_SHIFT;
if (!(shdr->sh_flags & SHF_ALLOC))
continue;
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
dest = mod->mem[type].base + (shdr->sh_entsize & SH_ENTSIZE_OFFSET_MASK);
if (shdr->sh_type != SHT_NOBITS) {
/*
* Our ELF checker already validated this, but let's
* be pedantic and make the goal clearer. We actually
* end up copying over all modifications made to the
* userspace copy of the entire struct module.
*/
if (i == info->index.mod &&
(WARN_ON_ONCE(shdr->sh_size != sizeof(struct module)))) {
ret = -ENOEXEC;
goto out_enomem;
}
memcpy(dest, (void *)shdr->sh_addr, shdr->sh_size);
}
/*
* Update the userspace copy's ELF section address to point to
* our newly allocated memory as a pure convenience so that
* users of info can keep taking advantage and using the newly
* minted official memory area.
*/
shdr->sh_addr = (unsigned long)dest;
pr_debug("\t0x%lx 0x%.8lx %s\n", (long)shdr->sh_addr,
(long)shdr->sh_size, info->secstrings + shdr->sh_name);
}
return 0;
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
out_enomem:
for (t--; t >= 0; t--)
module_memory_free(mod->mem[t].base, t);
return ret;
}
static int check_export_symbol_versions(struct module *mod)
{
#ifdef CONFIG_MODVERSIONS
if ((mod->num_syms && !mod->crcs) ||
(mod->num_gpl_syms && !mod->gpl_crcs)) {
return try_to_force_load(mod,
"no versions for exported symbols");
}
#endif
return 0;
}
static void flush_module_icache(const struct module *mod)
{
/*
* Flush the instruction cache, since we've played with text.
* Do it before processing of module parameters, so the module
* can provide parameter accessor functions of its own.
*/
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
for_each_mod_mem_type(type) {
const struct module_memory *mod_mem = &mod->mem[type];
if (mod_mem->size) {
flush_icache_range((unsigned long)mod_mem->base,
(unsigned long)mod_mem->base + mod_mem->size);
}
}
}
bool __weak module_elf_check_arch(Elf_Ehdr *hdr)
{
return true;
}
int __weak module_frob_arch_sections(Elf_Ehdr *hdr,
Elf_Shdr *sechdrs,
char *secstrings,
struct module *mod)
{
return 0;
}
/* module_blacklist is a comma-separated list of module names */
static char *module_blacklist;
static bool blacklisted(const char *module_name)
{
const char *p;
size_t len;
if (!module_blacklist)
return false;
for (p = module_blacklist; *p; p += len) {
len = strcspn(p, ",");
if (strlen(module_name) == len && !memcmp(module_name, p, len))
return true;
if (p[len] == ',')
len++;
}
return false;
}
core_param(module_blacklist, module_blacklist, charp, 0400);
static struct module *layout_and_allocate(struct load_info *info, int flags)
{
struct module *mod;
unsigned int ndx;
int err;
module: fix up CONFIG_KALLSYMS=n build. Starting from commit 4a4962263f07d14660849ec134ee42b63e95ea9a "reduce symbol table for loaded modules (v2)", the kernel/module.c build is broken with CONFIG_KALLSYMS disabled. CC kernel/module.o kernel/module.c:1995: warning: type defaults to 'int' in declaration of 'Elf_Hdr' kernel/module.c:1995: error: expected ';', ',' or ')' before '*' token kernel/module.c: In function 'load_module': kernel/module.c:2203: error: 'strmap' undeclared (first use in this function) kernel/module.c:2203: error: (Each undeclared identifier is reported only once kernel/module.c:2203: error: for each function it appears in.) kernel/module.c:2239: error: 'symoffs' undeclared (first use in this function) kernel/module.c:2239: error: implicit declaration of function 'layout_symtab' kernel/module.c:2240: error: 'stroffs' undeclared (first use in this function) make[1]: *** [kernel/module.o] Error 1 make: *** [kernel/module.o] Error 2 There are three different issues: - layout_symtab() takes a const Elf_Ehdr - layout_symtab() needs to return a value - symoffs/stroffs/strmap are referenced by the load_module() code despite being ifdefed out, which seems unnecessary given the noop behaviour of layout_symtab()/add_kallsyms() in the case of CONFIG_KALLSYMS=n. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Jan Beulich <jbeulich@novell.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 22:43:54 +00:00
/* Allow arches to frob section contents and sizes. */
err = module_frob_arch_sections(info->hdr, info->sechdrs,
info->secstrings, info->mod);
if (err < 0)
return ERR_PTR(err);
err = module_enforce_rwx_sections(info->hdr, info->sechdrs,
info->secstrings, info->mod);
if (err < 0)
return ERR_PTR(err);
/* We will do a special allocation for per-cpu sections later. */
info->sechdrs[info->index.pcpu].sh_flags &= ~(unsigned long)SHF_ALLOC;
/*
* Mark ro_after_init section with SHF_RO_AFTER_INIT so that
* layout_sections() can put it in the right place.
* Note: ro_after_init sections also have SHF_{WRITE,ALLOC} set.
*/
ndx = find_sec(info, ".data..ro_after_init");
if (ndx)
info->sechdrs[ndx].sh_flags |= SHF_RO_AFTER_INIT;
/*
* Mark the __jump_table section as ro_after_init as well: these data
* structures are never modified, with the exception of entries that
* refer to code in the __init section, which are annotated as such
* at module load time.
*/
ndx = find_sec(info, "__jump_table");
if (ndx)
info->sechdrs[ndx].sh_flags |= SHF_RO_AFTER_INIT;
/*
* Determine total sizes, and put offsets in sh_entsize. For now
* this is done generically; there doesn't appear to be any
* special cases for the architectures.
*/
layout_sections(info->mod, info);
layout_symtab(info->mod, info);
/* Allocate and move to the final place */
err = move_module(info->mod, info);
if (err)
return ERR_PTR(err);
/* Module has been copied to its final place now: return it. */
mod = (void *)info->sechdrs[info->index.mod].sh_addr;
kmemleak_load_module(mod, info);
return mod;
}
/* mod is no longer valid after this! */
static void module_deallocate(struct module *mod, struct load_info *info)
{
percpu_modfree(mod);
module_arch_freeing_init(mod);
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
free_mod_mem(mod);
}
int __weak module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
{
return 0;
}
static int post_relocation(struct module *mod, const struct load_info *info)
{
/* Sort exception table now relocations are done. */
sort_extable(mod->extable, mod->extable + mod->num_exentries);
/* Copy relocated percpu area over. */
percpu_modcopy(mod, (void *)info->sechdrs[info->index.pcpu].sh_addr,
info->sechdrs[info->index.pcpu].sh_size);
/* Setup kallsyms-specific fields. */
add_kallsyms(mod, info);
/* Arch-specific module finalizing. */
return module_finalize(info->hdr, info->sechdrs, mod);
}
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
/* Call module constructors. */
static void do_mod_ctors(struct module *mod)
{
#ifdef CONFIG_CONSTRUCTORS
unsigned long i;
for (i = 0; i < mod->num_ctors; i++)
mod->ctors[i]();
#endif
}
/* For freeing module_init on success, in case kallsyms traversing */
struct mod_initfree {
struct llist_node node;
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
void *init_text;
void *init_data;
void *init_rodata;
};
static void do_free_init(struct work_struct *w)
{
struct llist_node *pos, *n, *list;
struct mod_initfree *initfree;
list = llist_del_all(&init_free_list);
synchronize_rcu();
llist_for_each_safe(pos, n, list) {
initfree = container_of(pos, struct mod_initfree, node);
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
module_memfree(initfree->init_text);
module_memfree(initfree->init_data);
module_memfree(initfree->init_rodata);
kfree(initfree);
}
}
modules: wait do_free_init correctly The synchronization here is to ensure the ordering of freeing of a module init so that it happens before W+X checking. It is worth noting it is not that the freeing was not happening, it is just that our sanity checkers raced against the permission checkers which assume init memory is already gone. Commit 1a7b7d922081 ("modules: Use vmalloc special flag") moved calling do_free_init() into a global workqueue instead of relying on it being called through call_rcu(..., do_free_init), which used to allowed us call do_free_init() asynchronously after the end of a subsequent grace period. The move to a global workqueue broke the gaurantees for code which needed to be sure the do_free_init() would complete with rcu_barrier(). To fix this callers which used to rely on rcu_barrier() must now instead use flush_work(&init_free_wq). Without this fix, we still could encounter false positive reports in W+X checking since the rcu_barrier() here can not ensure the ordering now. Even worse, the rcu_barrier() can introduce significant delay. Eric Chanudet reported that the rcu_barrier introduces ~0.1s delay on a PREEMPT_RT kernel. [ 0.291444] Freeing unused kernel memory: 5568K [ 0.402442] Run /sbin/init as init process With this fix, the above delay can be eliminated. Link: https://lkml.kernel.org/r/20240227023546.2490667-1-changbin.du@huawei.com Fixes: 1a7b7d922081 ("modules: Use vmalloc special flag") Signed-off-by: Changbin Du <changbin.du@huawei.com> Tested-by: Eric Chanudet <echanude@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Xiaoyi Su <suxiaoyi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-27 02:35:46 +00:00
void flush_module_init_free_work(void)
{
flush_work(&init_free_wq);
}
#undef MODULE_PARAM_PREFIX
#define MODULE_PARAM_PREFIX "module."
/* Default value for module->async_probe_requested */
static bool async_probe;
module_param(async_probe, bool, 0644);
/*
* This is where the real work happens.
*
* Keep it uninlined to provide a reliable breakpoint target, e.g. for the gdb
* helper command 'lx-symbols'.
*/
static noinline int do_init_module(struct module *mod)
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
{
int ret = 0;
struct mod_initfree *freeinit;
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
#if defined(CONFIG_MODULE_STATS)
unsigned int text_size = 0, total_size = 0;
for_each_mod_mem_type(type) {
const struct module_memory *mod_mem = &mod->mem[type];
if (mod_mem->size) {
total_size += mod_mem->size;
if (type == MOD_TEXT || type == MOD_INIT_TEXT)
text_size += mod_mem->size;
}
}
#endif
freeinit = kmalloc(sizeof(*freeinit), GFP_KERNEL);
if (!freeinit) {
ret = -ENOMEM;
goto fail;
}
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
freeinit->init_text = mod->mem[MOD_INIT_TEXT].base;
freeinit->init_data = mod->mem[MOD_INIT_DATA].base;
freeinit->init_rodata = mod->mem[MOD_INIT_RODATA].base;
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
do_mod_ctors(mod);
/* Start the module */
if (mod->init != NULL)
ret = do_one_initcall(mod->init);
if (ret < 0) {
goto fail_free_freeinit;
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
}
if (ret > 0) {
pr_warn("%s: '%s'->init suspiciously returned %d, it should "
"follow 0/-E convention\n"
"%s: loading module anyway...\n",
__func__, mod->name, ret, __func__);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
dump_stack();
}
/* Now it's a first class citizen! */
mod->state = MODULE_STATE_LIVE;
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_LIVE, mod);
/* Delay uevent until module has finished its init routine */
kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
module, async: async_synchronize_full() on module init iff async is used If the default iosched is built as module, the kernel may deadlock while trying to load the iosched module on device probe if the probing was running off async. This is because async_synchronize_full() at the end of module init ends up waiting for the async job which initiated the module loading. async A modprobe 1. finds a device 2. registers the block device 3. request_module(default iosched) 4. modprobe in userland 5. load and init module 6. async_synchronize_full() Async A waits for modprobe to finish in request_module() and modprobe waits for async A to finish in async_synchronize_full(). Because there's no easy to track dependency once control goes out to userland, implementing properly nested flushing is difficult. For now, make module init perform async_synchronize_full() iff module init has queued async jobs as suggested by Linus. This avoids the described deadlock because iosched module doesn't use async and thus wouldn't invoke async_synchronize_full(). This is hacky and incomplete. It will deadlock if async module loading nests; however, this works around the known problem case and seems to be the best of bad options. For more details, please refer to the following thread. http://thread.gmane.org/gmane.linux.kernel/1420814 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alex Riesen <raa.lkml@gmail.com> Tested-by: Ming Lei <ming.lei@canonical.com> Tested-by: Alex Riesen <raa.lkml@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-16 02:52:51 +00:00
/*
* We need to finish all async code before the module init sequence
Revert "module, async: async_synchronize_full() on module init iff async is used" This reverts commit 774a1221e862b343388347bac9b318767336b20b. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d28007 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221e862 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Changyuan Lyu <changyuanl@google.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-27 23:39:53 +00:00
* is done. This has potential to deadlock if synchronous module
* loading is requested from async (which is not allowed!).
module, async: async_synchronize_full() on module init iff async is used If the default iosched is built as module, the kernel may deadlock while trying to load the iosched module on device probe if the probing was running off async. This is because async_synchronize_full() at the end of module init ends up waiting for the async job which initiated the module loading. async A modprobe 1. finds a device 2. registers the block device 3. request_module(default iosched) 4. modprobe in userland 5. load and init module 6. async_synchronize_full() Async A waits for modprobe to finish in request_module() and modprobe waits for async A to finish in async_synchronize_full(). Because there's no easy to track dependency once control goes out to userland, implementing properly nested flushing is difficult. For now, make module init perform async_synchronize_full() iff module init has queued async jobs as suggested by Linus. This avoids the described deadlock because iosched module doesn't use async and thus wouldn't invoke async_synchronize_full(). This is hacky and incomplete. It will deadlock if async module loading nests; however, this works around the known problem case and seems to be the best of bad options. For more details, please refer to the following thread. http://thread.gmane.org/gmane.linux.kernel/1420814 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alex Riesen <raa.lkml@gmail.com> Tested-by: Ming Lei <ming.lei@canonical.com> Tested-by: Alex Riesen <raa.lkml@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-16 02:52:51 +00:00
*
Revert "module, async: async_synchronize_full() on module init iff async is used" This reverts commit 774a1221e862b343388347bac9b318767336b20b. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d28007 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221e862 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Changyuan Lyu <changyuanl@google.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-27 23:39:53 +00:00
* See commit 0fdff3ec6d87 ("async, kmod: warn on synchronous
* request_module() from async workers") for more details.
module, async: async_synchronize_full() on module init iff async is used If the default iosched is built as module, the kernel may deadlock while trying to load the iosched module on device probe if the probing was running off async. This is because async_synchronize_full() at the end of module init ends up waiting for the async job which initiated the module loading. async A modprobe 1. finds a device 2. registers the block device 3. request_module(default iosched) 4. modprobe in userland 5. load and init module 6. async_synchronize_full() Async A waits for modprobe to finish in request_module() and modprobe waits for async A to finish in async_synchronize_full(). Because there's no easy to track dependency once control goes out to userland, implementing properly nested flushing is difficult. For now, make module init perform async_synchronize_full() iff module init has queued async jobs as suggested by Linus. This avoids the described deadlock because iosched module doesn't use async and thus wouldn't invoke async_synchronize_full(). This is hacky and incomplete. It will deadlock if async module loading nests; however, this works around the known problem case and seems to be the best of bad options. For more details, please refer to the following thread. http://thread.gmane.org/gmane.linux.kernel/1420814 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alex Riesen <raa.lkml@gmail.com> Tested-by: Ming Lei <ming.lei@canonical.com> Tested-by: Alex Riesen <raa.lkml@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-16 02:52:51 +00:00
*/
Revert "module, async: async_synchronize_full() on module init iff async is used" This reverts commit 774a1221e862b343388347bac9b318767336b20b. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d28007 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221e862 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Changyuan Lyu <changyuanl@google.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-27 23:39:53 +00:00
if (!mod->async_probe_requested)
module, async: async_synchronize_full() on module init iff async is used If the default iosched is built as module, the kernel may deadlock while trying to load the iosched module on device probe if the probing was running off async. This is because async_synchronize_full() at the end of module init ends up waiting for the async job which initiated the module loading. async A modprobe 1. finds a device 2. registers the block device 3. request_module(default iosched) 4. modprobe in userland 5. load and init module 6. async_synchronize_full() Async A waits for modprobe to finish in request_module() and modprobe waits for async A to finish in async_synchronize_full(). Because there's no easy to track dependency once control goes out to userland, implementing properly nested flushing is difficult. For now, make module init perform async_synchronize_full() iff module init has queued async jobs as suggested by Linus. This avoids the described deadlock because iosched module doesn't use async and thus wouldn't invoke async_synchronize_full(). This is hacky and incomplete. It will deadlock if async module loading nests; however, this works around the known problem case and seems to be the best of bad options. For more details, please refer to the following thread. http://thread.gmane.org/gmane.linux.kernel/1420814 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alex Riesen <raa.lkml@gmail.com> Tested-by: Ming Lei <ming.lei@canonical.com> Tested-by: Alex Riesen <raa.lkml@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-16 02:52:51 +00:00
async_synchronize_full();
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
ftrace_free_mem(mod, mod->mem[MOD_INIT_TEXT].base,
mod->mem[MOD_INIT_TEXT].base + mod->mem[MOD_INIT_TEXT].size);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
mutex_lock(&module_mutex);
/* Drop initial reference. */
module_put(mod);
trim_init_extable(mod);
#ifdef CONFIG_KALLSYMS
modules: fix longstanding /proc/kallsyms vs module insertion race. For CONFIG_KALLSYMS, we keep two symbol tables and two string tables. There's one full copy, marked SHF_ALLOC and laid out at the end of the module's init section. There's also a cut-down version that only contains core symbols and strings, and lives in the module's core section. After module init (and before we free the module memory), we switch the mod->symtab, mod->num_symtab and mod->strtab to point to the core versions. We do this under the module_mutex. However, kallsyms doesn't take the module_mutex: it uses preempt_disable() and rcu tricks to walk through the modules, because it's used in the oops path. It's also used in /proc/kallsyms. There's nothing atomic about the change of these variables, so we can get the old (larger!) num_symtab and the new symtab pointer; in fact this is what I saw when trying to reproduce. By grouping these variables together, we can use a carefully-dereferenced pointer to ensure we always get one or the other (the free of the module init section is already done in an RCU callback, so that's safe). We allocate the init one at the end of the module init section, and keep the core one inside the struct module itself (it could also have been allocated at the end of the module core, but that's probably overkill). Reported-by: Weilong Chen <chenweilong@huawei.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111541 Cc: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-02-03 06:25:26 +00:00
/* Switch to core kallsyms now init is done: kallsyms may be walking! */
rcu_assign_pointer(mod->kallsyms, &mod->core_kallsyms);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
#endif
ret = module_enable_rodata_ro(mod, true);
if (ret)
goto fail_mutex_unlock;
mod_tree_remove_init(mod);
module_arch_freeing_init(mod);
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
for_class_mod_mem_type(type, init) {
mod->mem[type].base = NULL;
mod->mem[type].size = 0;
}
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
#ifdef CONFIG_DEBUG_INFO_BTF_MODULES
/* .BTF is not SHF_ALLOC and will get removed, so sanitize pointer */
mod->btf_data = NULL;
#endif
/*
* We want to free module_init, but be aware that kallsyms may be
* walking this with preempt disabled. In all the failure paths, we
* call synchronize_rcu(), but we don't want to slow down the success
* path. module_memfree() cannot be called in an interrupt, so do the
* work and call synchronize_rcu() in a work queue.
*
init: fix false positives in W+X checking load_module() creates W+X mappings via __vmalloc_node_range() (from layout_and_allocate()->move_module()->module_alloc()) by using PAGE_KERNEL_EXEC. These mappings are later cleaned up via "call_rcu_sched(&freeinit->rcu, do_free_init)" from do_init_module(). This is a problem because call_rcu_sched() queues work, which can be run after debug_checkwx() is run, resulting in a race condition. If hit, the race results in a nasty splat about insecure W+X mappings, which results in a poor user experience as these are not the mappings that debug_checkwx() is intended to catch. This issue is observed on multiple arm64 platforms, and has been artificially triggered on an x86 platform. Address the race by flushing the queued work before running the arch-defined mark_rodata_ro() which then calls debug_checkwx(). Link: http://lkml.kernel.org/r/1525103946-29526-1-git-send-email-jhugo@codeaurora.org Fixes: e1a58320a38d ("x86/mm: Warn on W^X mappings") Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reported-by: Timur Tabi <timur@codeaurora.org> Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-11 23:01:42 +00:00
* Note that module_alloc() on most architectures creates W+X page
* mappings which won't be cleaned up until do_free_init() runs. Any
* code such as mark_rodata_ro() which depends on those mappings to
modules: wait do_free_init correctly The synchronization here is to ensure the ordering of freeing of a module init so that it happens before W+X checking. It is worth noting it is not that the freeing was not happening, it is just that our sanity checkers raced against the permission checkers which assume init memory is already gone. Commit 1a7b7d922081 ("modules: Use vmalloc special flag") moved calling do_free_init() into a global workqueue instead of relying on it being called through call_rcu(..., do_free_init), which used to allowed us call do_free_init() asynchronously after the end of a subsequent grace period. The move to a global workqueue broke the gaurantees for code which needed to be sure the do_free_init() would complete with rcu_barrier(). To fix this callers which used to rely on rcu_barrier() must now instead use flush_work(&init_free_wq). Without this fix, we still could encounter false positive reports in W+X checking since the rcu_barrier() here can not ensure the ordering now. Even worse, the rcu_barrier() can introduce significant delay. Eric Chanudet reported that the rcu_barrier introduces ~0.1s delay on a PREEMPT_RT kernel. [ 0.291444] Freeing unused kernel memory: 5568K [ 0.402442] Run /sbin/init as init process With this fix, the above delay can be eliminated. Link: https://lkml.kernel.org/r/20240227023546.2490667-1-changbin.du@huawei.com Fixes: 1a7b7d922081 ("modules: Use vmalloc special flag") Signed-off-by: Changbin Du <changbin.du@huawei.com> Tested-by: Eric Chanudet <echanude@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Xiaoyi Su <suxiaoyi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-27 02:35:46 +00:00
* be cleaned up needs to sync with the queued work by invoking
* flush_module_init_free_work().
*/
if (llist_add(&freeinit->node, &init_free_list))
schedule_work(&init_free_wq);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
mutex_unlock(&module_mutex);
wake_up_all(&module_wq);
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
mod_stat_add_long(text_size, &total_text_size);
mod_stat_add_long(total_size, &total_mod_size);
mod_stat_inc(&modcount);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
return 0;
fail_mutex_unlock:
mutex_unlock(&module_mutex);
fail_free_freeinit:
kfree(freeinit);
fail:
/* Try to protect us from buggy refcounters. */
mod->state = MODULE_STATE_GOING;
synchronize_rcu();
module_put(mod);
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_GOING, mod);
klp_module_going(mod);
ftrace_release_mod(mod);
free_module(mod);
wake_up_all(&module_wq);
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
return ret;
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
}
static int may_init_module(void)
{
if (!capable(CAP_SYS_MODULE) || modules_disabled)
return -EPERM;
return 0;
}
/* Is this module of this name done loading? No locks held. */
static bool finished_loading(const char *name)
{
struct module *mod;
bool ret;
/*
* The module_mutex should not be a heavily contended lock;
* if we get the occasional sleep here, we'll go an extra iteration
* in the wait_event_interruptible(), which is harmless.
*/
sched_annotate_sleep();
mutex_lock(&module_mutex);
mod = find_module_all(name, strlen(name), true);
ret = !mod || mod->state == MODULE_STATE_LIVE
|| mod->state == MODULE_STATE_GOING;
mutex_unlock(&module_mutex);
return ret;
}
/* Must be called with module_mutex held */
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
static int module_patient_check_exists(const char *name,
enum fail_dup_mod_reason reason)
{
struct module *old;
int err = 0;
old = find_module_all(name, strlen(name), true);
if (old == NULL)
return 0;
if (old->state == MODULE_STATE_COMING ||
old->state == MODULE_STATE_UNFORMED) {
/* Wait in case it fails to load. */
mutex_unlock(&module_mutex);
err = wait_event_interruptible(module_wq,
finished_loading(name));
mutex_lock(&module_mutex);
if (err)
return err;
/* The module might have gone in the meantime. */
old = find_module_all(name, strlen(name), true);
}
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
if (try_add_failed_module(name, reason))
pr_warn("Could not add fail-tracking for module: %s\n", name);
/*
* We are here only when the same module was being loaded. Do
* not try to load it again right now. It prevents long delays
* caused by serialized module load failures. It might happen
* when more devices of the same type trigger load of
* a particular module.
*/
if (old && old->state == MODULE_STATE_LIVE)
return -EEXIST;
return -EBUSY;
}
/*
* We try to place it in the list now to make sure it's unique before
* we dedicate too many resources. In particular, temporary percpu
* memory exhaustion.
*/
static int add_unformed_module(struct module *mod)
{
int err;
mod->state = MODULE_STATE_UNFORMED;
mutex_lock(&module_mutex);
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
err = module_patient_check_exists(mod->name, FAIL_DUP_MOD_LOAD);
if (err)
goto out;
mod_update_bounds(mod);
list_add_rcu(&mod->list, &modules);
mod_tree_insert(mod);
err = 0;
out:
mutex_unlock(&module_mutex);
return err;
}
static int complete_formation(struct module *mod, struct load_info *info)
{
int err;
mutex_lock(&module_mutex);
/* Find duplicate symbols (must be called under lock). */
err = verify_exported_symbols(mod);
if (err < 0)
goto out;
/* These rely on module_mutex for list integrity. */
module_bug_finalize(info->hdr, info->sechdrs, mod);
module_cfi_finalize(info->hdr, info->sechdrs, mod);
err = module_enable_rodata_ro(mod, false);
if (err)
goto out_strict_rwx;
err = module_enable_data_nx(mod);
if (err)
goto out_strict_rwx;
err = module_enable_text_rox(mod);
if (err)
goto out_strict_rwx;
/*
* Mark state as coming so strong_try_module_get() ignores us,
* but kallsyms etc. can see us.
*/
mod->state = MODULE_STATE_COMING;
mutex_unlock(&module_mutex);
return 0;
out_strict_rwx:
module_bug_cleanup(mod);
out:
mutex_unlock(&module_mutex);
return err;
}
static int prepare_coming_module(struct module *mod)
{
int err;
ftrace_module_enable(mod);
err = klp_module_coming(mod);
if (err)
return err;
err = blocking_notifier_call_chain_robust(&module_notify_list,
MODULE_STATE_COMING, MODULE_STATE_GOING, mod);
err = notifier_to_errno(err);
if (err)
klp_module_going(mod);
return err;
}
module: add extra argument for parse_params() callback This adds an extra argument onto parse_params() to be used as a way to make the unused callback a bit more useful and generic by allowing the caller to pass on a data structure of its choice. An example use case is to allow us to easily make module parameters for every module which we will do next. @ parse @ identifier name, args, params, num, level_min, level_max; identifier unknown, param, val, doing; type s16; @@ extern char *parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, s16 level_min, s16 level_max, + void *arg, int (*unknown)(char *param, char *val, const char *doing + , void *arg )); @ parse_mod @ identifier name, args, params, num, level_min, level_max; identifier unknown, param, val, doing; type s16; @@ char *parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, s16 level_min, s16 level_max, + void *arg, int (*unknown)(char *param, char *val, const char *doing + , void *arg )) { ... } @ parse_args_found @ expression R, E1, E2, E3, E4, E5, E6; identifier func; @@ ( R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, func); | R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, &func); | R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, NULL); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, func); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, &func); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, NULL); ) @ parse_args_unused depends on parse_args_found @ identifier parse_args_found.func; @@ int func(char *param, char *val, const char *unused + , void *arg ) { ... } @ mod_unused depends on parse_args_found @ identifier parse_args_found.func; expression A1, A2, A3; @@ - func(A1, A2, A3); + func(A1, A2, A3, NULL); Generated-by: Coccinelle SmPL Cc: cocci@systeme.lip6.fr Cc: Tejun Heo <tj@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Ewan Milne <emilne@redhat.com> Cc: Jean Delvare <jdelvare@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Cc: linux-kernel@vger.kernel.org Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-30 23:20:03 +00:00
static int unknown_module_param_cb(char *param, char *val, const char *modname,
void *arg)
{
struct module *mod = arg;
int ret;
if (strcmp(param, "async_probe") == 0) {
if (kstrtobool(val, &mod->async_probe_requested))
mod->async_probe_requested = true;
return 0;
}
/* Check for magic 'dyndbg' arg */
ret = ddebug_dyndbg_module_param_cb(param, val, modname);
if (ret != 0)
pr_warn("%s: unknown parameter '%s' ignored\n", modname, param);
return 0;
}
/* Module within temporary copy, this doesn't do any allocation */
static int early_mod_check(struct load_info *info, int flags)
{
int err;
/*
* Now that we know we have the correct module name, check
* if it's blacklisted.
*/
if (blacklisted(info->name)) {
pr_err("Module %s is blacklisted\n", info->name);
return -EPERM;
}
err = rewrite_section_headers(info, flags);
if (err)
return err;
/* Check module struct version now, before we try to use module. */
if (!check_modstruct_version(info, info->mod))
return -ENOEXEC;
err = check_modinfo(info->mod, info, flags);
if (err)
return err;
module: avoid allocation if module is already present and ready The finit_module() system call can create unnecessary virtual memory pressure for duplicate modules. This is because load_module() can in the worse case allocate more than twice the size of a module in virtual memory. This saves at least a full size of the module in wasted vmalloc space memory by trying to avoid duplicates as soon as we can validate the module name in the read module structure. This can only be an issue if a system is getting hammered with userspace loading modules. There are two ways to load modules typically on systems, one is the kernel moduile auto-loading (*request_module*() calls in-kernel) and the other is things like udev. The auto-loading is in-kernel, but that pings back to userspace to just call modprobe. We already have a way to restrict the amount of concurrent kernel auto-loads in a given time, however that still allows multiple requests for the same module to go through and force two threads in userspace racing to call modprobe for the same exact module. Even though libkmod which both modprobe and udev does check if a module is already loaded prior calling finit_module() races are still possible and this is clearly evident today when you have multiple CPUs. To avoid memory pressure for such stupid cases put a stop gap for them. The *earliest* we can detect duplicates from the modules side of things is once we have blessed the module name, sadly after the first vmalloc allocation. We can check for the module being present *before* a secondary vmalloc() allocation. There is a linear relationship between wasted virtual memory bytes and the number of CPU counts. The reason is that udev ends up racing to call tons of the same modules for each of the CPUs. We can see the different linear relationships between wasted virtual memory and CPU count during after boot in the following graph: +----------------------------------------------------------------------------+ 14GB |-+ + + + + *+ +-| | **** | | *** | | ** | 12GB |-+ ** +-| | ** | | ** | | ** | | ** | 10GB |-+ ** +-| | ** | | ** | | ** | 8GB |-+ ** +-| waste | ** ### | | ** #### | | ** ####### | 6GB |-+ **** #### +-| | * #### | | * #### | | ***** #### | 4GB |-+ ** #### +-| | ** #### | | ** #### | | ** #### | 2GB |-+ ** ##### +-| | * #### | | * #### Before ******* | | **## + + + + After ####### | +----------------------------------------------------------------------------+ 0 50 100 150 200 250 300 CPUs count On the y-axis we can see gigabytes of wasted virtual memory during boot due to duplicate module requests which just end up failing. Trying to infer the slope this ends up being about ~463 MiB per CPU lost prior to this patch. After this patch we only loose about ~230 MiB per CPU, for a total savings of about ~233 MiB per CPU. This is all *just on bootup*! On a 8vcpu 8 GiB RAM system using kdevops and testing against selftests kmod.sh -t 0008 I see a saving in the *highest* side of memory consumption of up to ~ 84 MiB with the Linux kernel selftests kmod test 0008. With the new stress-ng module test I see a 145 MiB difference in max memory consumption with 100 ops. The stress-ng module ops tests can be pretty pathalogical -- it is not realistic, however it was used to finally successfully reproduce issues which are only reported to happen on system with over 400 CPUs [0] by just usign 100 ops on a 8vcpu 8 GiB RAM system. Running out of virtual memory space is no surprise given the above graph, since at least on x86_64 we're capped at 128 MiB, eventually we'd hit a series of errors and once can use the above graph to guestimate when. This of course will vary depending on the features you have enabled. So for instance, enabling KASAN seems to make this much worse. The results with kmod and stress-ng can be observed and visualized below. The time it takes to run the test is also not affected. The kmod tests 0008: The gnuplot is set to a range from 400000 KiB (390 Mib) - 580000 (566 Mib) given the tests peak around that range. cat kmod.plot set term dumb set output fileout set yrange [400000:580000] plot filein with linespoints title "Memory usage (KiB)" Before: root@kmod ~ # /data/linux-next/tools/testing/selftests/kmod/kmod.sh -t 0008 root@kmod ~ # free -k -s 1 -c 40 | grep Mem | awk '{print $3}' > log-0008-before.txt ^C root@kmod ~ # sort -n -r log-0008-before.txt | head -1 528732 So ~516.33 MiB After: root@kmod ~ # /data/linux-next/tools/testing/selftests/kmod/kmod.sh -t 0008 root@kmod ~ # free -k -s 1 -c 40 | grep Mem | awk '{print $3}' > log-0008-after.txt ^C root@kmod ~ # sort -n -r log-0008-after.txt | head -1 442516 So ~432.14 MiB That's about 84 ~MiB in savings in the worst case. The graphs: root@kmod ~ # gnuplot -e "filein='log-0008-before.txt'; fileout='graph-0008-before.txt'" kmod.plot root@kmod ~ # gnuplot -e "filein='log-0008-after.txt'; fileout='graph-0008-after.txt'" kmod.plot root@kmod ~ # cat graph-0008-before.txt 580000 +-----------------------------------------------------------------+ | + + + + + + + | 560000 |-+ Memory usage (KiB) ***A***-| | | 540000 |-+ +-| | | | *A *AA*AA*A*AA *A*AA A*A*A *AA*A*AA*A A | 520000 |-+A*A*AA *AA*A *A*AA*A*AA *A*A A *A+-| |*A | 500000 |-+ +-| | | 480000 |-+ +-| | | 460000 |-+ +-| | | | | 440000 |-+ +-| | | 420000 |-+ +-| | + + + + + + + | 400000 +-----------------------------------------------------------------+ 0 5 10 15 20 25 30 35 40 root@kmod ~ # cat graph-0008-after.txt 580000 +-----------------------------------------------------------------+ | + + + + + + + | 560000 |-+ Memory usage (KiB) ***A***-| | | 540000 |-+ +-| | | | | 520000 |-+ +-| | | 500000 |-+ +-| | | 480000 |-+ +-| | | 460000 |-+ +-| | | | *A *A*A | 440000 |-+A*A*AA*A A A*A*AA A*A*AA*A*AA*A*AA*A*AA*AA*A*AA*A*AA-| |*A *A*AA*A | 420000 |-+ +-| | + + + + + + + | 400000 +-----------------------------------------------------------------+ 0 5 10 15 20 25 30 35 40 The stress-ng module tests: This is used to run the test to try to reproduce the vmap issues reported by David: echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Prior to this commit: root@kmod ~ # free -k -s 1 -c 40 | grep Mem | awk '{print $3}' > baseline-stress-ng.txt root@kmod ~ # sort -n -r baseline-stress-ng.txt | head -1 5046456 After this commit: root@kmod ~ # free -k -s 1 -c 40 | grep Mem | awk '{print $3}' > after-stress-ng.txt root@kmod ~ # sort -n -r after-stress-ng.txt | head -1 4896972 5046456 - 4896972 149484 149484/1024 145.98046875000000000000 So this commit using stress-ng reveals saving about 145 MiB in memory using 100 ops from stress-ng which reproduced the vmap issue reported. cat kmod.plot set term dumb set output fileout set yrange [4700000:5070000] plot filein with linespoints title "Memory usage (KiB)" root@kmod ~ # gnuplot -e "filein='baseline-stress-ng.txt'; fileout='graph-stress-ng-before.txt'" kmod-simple-stress-ng.plot root@kmod ~ # gnuplot -e "filein='after-stress-ng.txt'; fileout='graph-stress-ng-after.txt'" kmod-simple-stress-ng.plot root@kmod ~ # cat graph-stress-ng-before.txt +---------------------------------------------------------------+ 5.05e+06 |-+ + A + + + + + + +-| | * Memory usage (KiB) ***A*** | | * A | 5e+06 |-+ ** ** +-| | ** * * A | 4.95e+06 |-+ * * A * A* +-| | * * A A * * * * A | | * * * * * * *A * * * A * | 4.9e+06 |-+ * * * A*A * A*AA*A A *A **A **A*A *+-| | A A*A A * A * * A A * A * ** | | * ** ** * * * * * * * | 4.85e+06 |-+ A A A ** * * ** *-| | * * * * ** * | | * A * * * * | 4.8e+06 |-+ * * * A A-| | * * * | 4.75e+06 |-+ * * * +-| | * ** | | * + + + + + + ** + | 4.7e+06 +---------------------------------------------------------------+ 0 5 10 15 20 25 30 35 40 root@kmod ~ # cat graph-stress-ng-after.txt +---------------------------------------------------------------+ 5.05e+06 |-+ + + + + + + + +-| | Memory usage (KiB) ***A*** | | | 5e+06 |-+ +-| | | 4.95e+06 |-+ +-| | | | | 4.9e+06 |-+ *AA +-| | A*AA*A*A A A*AA*AA*A*AA*A A A A*A *AA*A*A A A*AA*AA | | * * ** * * * ** * *** * | 4.85e+06 |-+* *** * * * * *** A * * +-| | * A * * ** * * A * * | | * * * * ** * * | 4.8e+06 |-+* * * A * * * +-| | * * * A * * | 4.75e+06 |-* * * * * +-| | * * * * * | | * + * *+ + + + + * *+ | 4.7e+06 +---------------------------------------------------------------+ 0 5 10 15 20 25 30 35 40 [0] https://lkml.kernel.org/r/20221013180518.217405-1-david@redhat.com Reported-by: David Hildenbrand <david@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-11 04:48:03 +00:00
mutex_lock(&module_mutex);
err = module_patient_check_exists(info->mod->name, FAIL_DUP_MOD_BECOMING);
mutex_unlock(&module_mutex);
return err;
}
/*
* Allocate and load the module: note that size of section 0 is always
* zero, and we rely on this for optional sections.
*/
static int load_module(struct load_info *info, const char __user *uargs,
int flags)
{
struct module *mod;
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
bool module_allocated = false;
long err = 0;
char *after_dashes;
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
/*
* Do the signature check (if any) first. All that
* the signature check needs is info->len, it does
* not need any of the section info. That can be
* set up later. This will minimize the chances
* of a corrupt module causing problems before
* we even get to the signature check.
*
* The check will also adjust info->len by stripping
* off the sig length at the end of the module, making
* checks against info->len more correct.
*/
err = module_sig_check(info, flags);
if (err)
goto free_copy;
/*
* Do basic sanity checks against the ELF header and
* sections. Cache useful sections and set the
* info->mod to the userspace passed struct module.
module: harden ELF info handling 5fdc7db644 ("module: setup load info before module_sig_check()") moved the ELF setup, so that it was done before the signature check. This made the module name available to signature error messages. However, the checks for ELF correctness in setup_load_info are not sufficient to prevent bad memory references due to corrupted offset fields, indices, etc. So, there's a regression in behavior here: a corrupt and unsigned (or badly signed) module, which might previously have been rejected immediately, can now cause an oops/crash. Harden ELF handling for module loading by doing the following: - Move the signature check back up so that it comes before ELF initialization. It's best to do the signature check to see if we can trust the module, before using the ELF structures inside it. This also makes checks against info->len more accurate again, as this field will be reduced by the length of the signature in mod_check_sig(). The module name is now once again not available for error messages during the signature check, but that seems like a fair tradeoff. - Check if sections have offset / size fields that at least don't exceed the length of the module. - Check if sections have section name offsets that don't fall outside the section name table. - Add a few other sanity checks against invalid section indices, etc. This is not an exhaustive consistency check, but the idea is to at least get through the signature and blacklist checks without crashing because of corrupted ELF info, and to error out gracefully for most issues that would have caused problems later on. Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-01-14 22:21:46 +00:00
*/
err = elf_validity_cache_copy(info, flags);
if (err)
goto free_copy;
err = early_mod_check(info, flags);
if (err)
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
goto free_copy;
/* Figure out module layout, and allocate all the memory. */
mod = layout_and_allocate(info, flags);
if (IS_ERR(mod)) {
err = PTR_ERR(mod);
goto free_copy;
}
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
module_allocated = true;
audit_log_kern_module(mod->name);
/* Reserve our place in the list. */
err = add_unformed_module(mod);
if (err)
goto free_module;
/*
* We are tainting your kernel if your module gets into
* the modules linked list somehow.
*/
module_augment_kernel_taints(mod, info);
/* To avoid stressing percpu allocator, do this once we're unique. */
err = percpu_modalloc(mod, info);
if (err)
goto unlink_mod;
/* Now module is in final location, initialize linked lists, etc. */
err = module_unload_init(mod);
if (err)
goto unlink_mod;
init_param_lock(mod);
module: add per-module param_lock Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-16 20:48:52 +00:00
/*
* Now we've got everything in the final locations, we can
* find optional sections.
*/
err = find_module_sections(mod, info);
if (err)
goto free_unload;
err = check_export_symbol_versions(mod);
if (err)
goto free_unload;
[PATCH] modules: add version and srcversion to sysfs This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 05:05:15 +00:00
/* Set up MODINFO_ATTR fields */
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
setup_modinfo(mod, info);
[PATCH] modules: add version and srcversion to sysfs This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 05:05:15 +00:00
/* Fix up syms, so that st_value is a pointer to location. */
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
err = simplify_symbols(mod, info);
if (err < 0)
goto free_modinfo;
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
err = apply_relocations(mod, info);
if (err < 0)
goto free_modinfo;
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
err = post_relocation(mod, info);
if (err < 0)
goto free_modinfo;
flush_module_icache(mod);
/* Now copy in args */
mod->args = strndup_user(uargs, ~0UL >> 1);
if (IS_ERR(mod->args)) {
err = PTR_ERR(mod->args);
goto free_arch_cleanup;
}
module: add printk formats to add module build ID to stacktraces Let's make kernel stacktraces easier to identify by including the build ID[1] of a module if the stacktrace is printing a symbol from a module. This makes it simpler for developers to locate a kernel module's full debuginfo for a particular stacktrace. Combined with scripts/decode_stracktrace.sh, a developer can download the matching debuginfo from a debuginfod[2] server and find the exact file and line number for the functions plus offsets in a stacktrace that match the module. This is especially useful for pstore crash debugging where the kernel crashes are recorded in something like console-ramoops and the recovery kernel/modules are different or the debuginfo doesn't exist on the device due to space concerns (the debuginfo can be too large for space limited devices). Originally, I put this on the %pS format, but that was quickly rejected given that %pS is used in other places such as ftrace where build IDs aren't meaningful. There was some discussions on the list to put every module build ID into the "Modules linked in:" section of the stacktrace message but that quickly becomes very hard to read once you have more than three or four modules linked in. It also provides too much information when we don't expect each module to be traversed in a stacktrace. Having the build ID for modules that aren't important just makes things messy. Splitting it to multiple lines for each module quickly explodes the number of lines printed in an oops too, possibly wrapping the warning off the console. And finally, trying to stash away each module used in a callstack to provide the ID of each symbol printed is cumbersome and would require changes to each architecture to stash away modules and return their build IDs once unwinding has completed. Instead, we opt for the simpler approach of introducing new printk formats '%pS[R]b' for "pointer symbolic backtrace with module build ID" and '%pBb' for "pointer backtrace with module build ID" and then updating the few places in the architecture layer where the stacktrace is printed to use this new format. Before: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm] direct_entry+0x16c/0x1b4 [lkdtm] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 After: Call trace: lkdtm_WARNING+0x28/0x30 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] direct_entry+0x16c/0x1b4 [lkdtm 6c2215028606bda50de823490723dc4bc5bf46f9] full_proxy_write+0x74/0xa4 vfs_write+0xec/0x2e8 [akpm@linux-foundation.org: fix build with CONFIG_MODULES=n, tweak code layout] [rdunlap@infradead.org: fix build when CONFIG_MODULES is not set] Link: https://lkml.kernel.org/r/20210513171510.20328-1-rdunlap@infradead.org [akpm@linux-foundation.org: make kallsyms_lookup_buildid() static] [cuibixuan@huawei.com: fix build error when CONFIG_SYSFS is disabled] Link: https://lkml.kernel.org/r/20210525105049.34804-1-cuibixuan@huawei.com Link: https://lkml.kernel.org/r/20210511003845.2429846-6-swboyd@chromium.org Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1] Link: https://sourceware.org/elfutils/Debuginfod.html [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Evan Green <evgreen@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Sasha Levin <sashal@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 01:09:20 +00:00
init_build_id(mod, info);
ftrace/module: Hardcode ftrace_module_init() call into load_module() A race exists between module loading and enabling of function tracer. CPU 1 CPU 2 ----- ----- load_module() module->state = MODULE_STATE_COMING register_ftrace_function() mutex_lock(&ftrace_lock); ftrace_startup() update_ftrace_function(); ftrace_arch_code_modify_prepare() set_all_module_text_rw(); <enables-ftrace> ftrace_arch_code_modify_post_process() set_all_module_text_ro(); [ here all module text is set to RO, including the module that is loading!! ] blocking_notifier_call_chain(MODULE_STATE_COMING); ftrace_init_module() [ tries to modify code, but it's RO, and fails! ftrace_bug() is called] When this race happens, ftrace_bug() will produces a nasty warning and all of the function tracing features will be disabled until reboot. The simple solution is to treate module load the same way the core kernel is treated at boot. To hardcode the ftrace function modification of converting calls to mcount into nops. This is done in init/main.c there's no reason it could not be done in load_module(). This gives a better control of the changes and doesn't tie the state of the module to its notifiers as much. Ftrace is special, it needs to be treated as such. The reason this would work, is that the ftrace_module_init() would be called while the module is in MODULE_STATE_UNFORMED, which is ignored by the set_all_module_text_ro() call. Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.com Reported-by: Takao Indoh <indou.takao@jp.fujitsu.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-24 14:40:12 +00:00
/* Ftrace init must be called in the MODULE_STATE_UNFORMED state */
ftrace_module_init(mod);
/* Finally it's fully formed, ready to start executing. */
err = complete_formation(mod, info);
if (err)
goto ddebug_cleanup;
err = prepare_coming_module(mod);
if (err)
goto bug_cleanup;
mod->async_probe_requested = async_probe;
/* Module is ready to execute: parsing args may do that. */
after_dashes = parse_args(mod->name, mod->args, mod->kp, mod->num_kp,
-32768, 32767, mod,
module: add extra argument for parse_params() callback This adds an extra argument onto parse_params() to be used as a way to make the unused callback a bit more useful and generic by allowing the caller to pass on a data structure of its choice. An example use case is to allow us to easily make module parameters for every module which we will do next. @ parse @ identifier name, args, params, num, level_min, level_max; identifier unknown, param, val, doing; type s16; @@ extern char *parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, s16 level_min, s16 level_max, + void *arg, int (*unknown)(char *param, char *val, const char *doing + , void *arg )); @ parse_mod @ identifier name, args, params, num, level_min, level_max; identifier unknown, param, val, doing; type s16; @@ char *parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, s16 level_min, s16 level_max, + void *arg, int (*unknown)(char *param, char *val, const char *doing + , void *arg )) { ... } @ parse_args_found @ expression R, E1, E2, E3, E4, E5, E6; identifier func; @@ ( R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, func); | R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, &func); | R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, NULL); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, func); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, &func); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, NULL); ) @ parse_args_unused depends on parse_args_found @ identifier parse_args_found.func; @@ int func(char *param, char *val, const char *unused + , void *arg ) { ... } @ mod_unused depends on parse_args_found @ identifier parse_args_found.func; expression A1, A2, A3; @@ - func(A1, A2, A3); + func(A1, A2, A3, NULL); Generated-by: Coccinelle SmPL Cc: cocci@systeme.lip6.fr Cc: Tejun Heo <tj@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Ewan Milne <emilne@redhat.com> Cc: Jean Delvare <jdelvare@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Cc: linux-kernel@vger.kernel.org Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-30 23:20:03 +00:00
unknown_module_param_cb);
if (IS_ERR(after_dashes)) {
err = PTR_ERR(after_dashes);
goto coming_cleanup;
} else if (after_dashes) {
pr_warn("%s: parameters '%s' after `--' ignored\n",
mod->name, after_dashes);
}
/* Link in to sysfs. */
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
err = mod_sysfs_setup(mod, info, mod->kp, mod->num_kp);
if (err < 0)
goto coming_cleanup;
module: preserve Elf information for livepatch modules For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-23 00:03:16 +00:00
if (is_livepatch_module(mod)) {
err = copy_module_elf(mod, info);
if (err < 0)
goto sysfs_cleanup;
}
/* Get rid of temporary copy. */
free_copy(info, flags);
/* Done! */
trace_module_load(mod);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
return do_init_module(mod);
module: preserve Elf information for livepatch modules For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-23 00:03:16 +00:00
sysfs_cleanup:
mod_sysfs_teardown(mod);
coming_cleanup:
mod->state = MODULE_STATE_GOING;
module: fix memory leak on early load_module() failures While looking for early possible module loading failures I was able to reproduce a memory leak possible with kmemleak. There are a few rare ways to trigger a failure: o we've run into a failure while processing kernel parameters (parse_args() returns an error) o mod_sysfs_setup() fails o we're a live patch module and copy_module_elf() fails Chances of running into this issue is really low. kmemleak splat: unreferenced object 0xffff9f2c4ada1b00 (size 32): comm "kworker/u16:4", pid 82, jiffies 4294897636 (age 681.816s) hex dump (first 32 bytes): 6d 65 6d 73 74 69 63 6b 30 00 00 00 00 00 00 00 memstick0....... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8c6cfeba>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8c200046>] __kmalloc_track_caller+0x126/0x230 [<ffffffff8c1bc581>] kstrdup+0x31/0x60 [<ffffffff8c1bc5d4>] kstrdup_const+0x24/0x30 [<ffffffff8c3c23aa>] kvasprintf_const+0x7a/0x90 [<ffffffff8c3b5481>] kobject_set_name_vargs+0x21/0x90 [<ffffffff8c4fbdd7>] dev_set_name+0x47/0x50 [<ffffffffc07819e5>] memstick_check+0x95/0x33c [memstick] [<ffffffff8c09c893>] process_one_work+0x1f3/0x4b0 [<ffffffff8c09cb98>] worker_thread+0x48/0x4e0 [<ffffffff8c0a2b79>] kthread+0xc9/0xe0 [<ffffffff8c6dab5f>] ret_from_fork+0x1f/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Cc: stable <stable@vger.kernel.org> # v2.6.30 Fixes: e180a6b7759a ("param: fix charp parameters set via sysfs") Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Jessica Yu <jeyu@redhat.com>
2017-02-10 22:06:22 +00:00
destroy_params(mod->kp, mod->num_kp);
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_GOING, mod);
klp_module_going(mod);
bug_cleanup:
mod->state = MODULE_STATE_GOING;
/* module_bug_cleanup needs module_mutex protection */
mutex_lock(&module_mutex);
2010-10-05 18:29:27 +00:00
module_bug_cleanup(mod);
mutex_unlock(&module_mutex);
ddebug_cleanup:
ftrace_release_mod(mod);
synchronize_rcu();
kfree(mod->args);
free_arch_cleanup:
module_arch_cleanup(mod);
free_modinfo:
free_modinfo(mod);
free_unload:
module_unload_free(mod);
unlink_mod:
mutex_lock(&module_mutex);
/* Unlink carefully: kallsyms could be walking list. */
list_del_rcu(&mod->list);
mod_tree_remove(mod);
wake_up_all(&module_wq);
/* Wait for RCU-sched synchronizing before releasing mod->list. */
synchronize_rcu();
mutex_unlock(&module_mutex);
free_module:
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
mod_stat_bump_invalid(info, flags);
/* Free lock-classes; relies on the preceding sync_rcu() */
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
for_class_mod_mem_type(type, core_data) {
lockdep_free_key_range(mod->mem[type].base,
mod->mem[type].size);
}
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
module_deallocate(mod, info);
free_copy:
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
/*
* The info->len is always set. We distinguish between
* failures once the proper module was allocated and
* before that.
*/
if (!module_allocated)
mod_stat_bump_becoming(info, flags);
free_copy(info, flags);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
return err;
}
SYSCALL_DEFINE3(init_module, void __user *, umod,
unsigned long, len, const char __user *, uargs)
{
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
int err;
struct load_info info = { };
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
err = may_init_module();
if (err)
return err;
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
pr_debug("init_module: umod=%p, len=%lu, uargs=%p\n",
umod, len, uargs);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
err = copy_module_from_user(umod, len, &info);
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
if (err) {
mod_stat_inc(&failed_kreads);
mod_stat_add_long(len, &invalid_kread_bytes);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
return err;
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
}
return load_module(&info, uargs, 0);
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
}
module: Move RO/NX module protection to after ftrace module update The commit: 84e1c6bb38eb318e456558b610396d9f1afaabf0 x86: Add RO/NX protection for loadable kernel modules Broke the function tracer with this output: ------------[ cut here ]------------ WARNING: at kernel/trace/ftrace.c:1014 ftrace_bug+0x114/0x171() Hardware name: Precision WorkStation 470 Modules linked in: i2c_core(+) Pid: 86, comm: modprobe Not tainted 2.6.37-rc2+ #68 Call Trace: [<ffffffff8104e957>] warn_slowpath_common+0x85/0x9d [<ffffffffa00026db>] ? __process_new_adapter+0x7/0x34 [i2c_core] [<ffffffffa00026db>] ? __process_new_adapter+0x7/0x34 [i2c_core] [<ffffffff8104e989>] warn_slowpath_null+0x1a/0x1c [<ffffffff810a9dfe>] ftrace_bug+0x114/0x171 [<ffffffffa00026db>] ? __process_new_adapter+0x7/0x34 [i2c_core] [<ffffffff810aa0db>] ftrace_process_locs+0x1ae/0x274 [<ffffffffa00026db>] ? __process_new_adapter+0x7/0x34 [i2c_core] [<ffffffff810aa29e>] ftrace_module_notify+0x39/0x44 [<ffffffff814405cf>] notifier_call_chain+0x37/0x63 [<ffffffff8106e054>] __blocking_notifier_call_chain+0x46/0x5b [<ffffffff8106e07d>] blocking_notifier_call_chain+0x14/0x16 [<ffffffff8107ffde>] sys_init_module+0x73/0x1f3 [<ffffffff8100acf2>] system_call_fastpath+0x16/0x1b ---[ end trace 2aff4f4ca53ec746 ]--- ftrace faulted on writing [<ffffffffa00026db>] __process_new_adapter+0x7/0x34 [i2c_core] The cause was that the module text was set to read only before ftrace could convert the calls to mcount to nops. Thus, the conversions failed due to not being able to write to the text locations. The simple fix is to move setting the module to read only after the module notifiers are called (where ftrace sets the module mcounts to nops). Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-29 18:15:42 +00:00
modules: catch concurrent module loads, treat them as idempotent This is the new-and-improved attempt at avoiding huge memory load spikes when the user space boot sequence tries to load hundreds (or even thousands) of redundant duplicate modules in parallel. See commit 9828ed3f695a ("module: error out early on concurrent load of the same module file") for background and an earlier failed attempt that was reverted. That earlier attempt just said "concurrently loading the same module is silly, just open the module file exclusively and return -ETXTBSY if somebody else is already loading it". While it is true that concurrent module loads of the same module is silly, the reason that earlier attempt then failed was that the concurrently loaded module would often be a prerequisite for another module. Thus failing to load the prerequisite would then cause cascading failures of the other modules, rather than just short-circuiting that one unnecessary module load. At the same time, we still really don't want to load the contents of the same module file hundreds of times, only to then wait for an eventually successful load, and have everybody else return -EEXIST. As a result, this takes another approach, and treats concurrent module loads from the same file as "idempotent" in the inode. So if one module load is ongoing, we don't start a new one, but instead just wait for the first one to complete and return the same return value as it did. So unlike the first attempt, this does not return early: the intent is not to speed up the boot, but to avoid a thundering herd problem in allocating memory (both physical and virtual) for a module more than once. Also note that this does change behavior: it used to be that when you had concurrent loads, you'd have one "winner" that would return success, and everybody else would return -EEXIST. In contrast, this idempotent logic goes all Oprah on the problem, and says "You are a winner! And you are a winner! We are ALL winners". But since there's no possible actual real semantic difference between "you loaded the module" and "somebody else already loaded the module", this is more of a feel-good change than an actual honest-to-goodness semantic change. Of course, any true Johnny-come-latelies that don't get caught in the concurrency filter will still return -EEXIST. It's no different from not even getting a seat at an Oprah taping. That's life. See the long thread on the kernel mailing list about this all, which includes some numbers for memory use before and after the patch. Link: https://lore.kernel.org/lkml/20230524213620.3509138-1-mcgrof@kernel.org/ Reviewed-by: Johan Hovold <johan@kernel.org> Tested-by: Johan Hovold <johan@kernel.org> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Rudi Heitbaum <rudi@heitbaum..com> Tested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-30 01:39:51 +00:00
struct idempotent {
const void *cookie;
struct hlist_node entry;
struct completion complete;
int ret;
};
#define IDEM_HASH_BITS 8
static struct hlist_head idem_hash[1 << IDEM_HASH_BITS];
static DEFINE_SPINLOCK(idem_lock);
static bool idempotent(struct idempotent *u, const void *cookie)
{
int hash = hash_ptr(cookie, IDEM_HASH_BITS);
struct hlist_head *head = idem_hash + hash;
struct idempotent *existing;
bool first;
u->ret = 0;
u->cookie = cookie;
init_completion(&u->complete);
spin_lock(&idem_lock);
first = true;
hlist_for_each_entry(existing, head, entry) {
if (existing->cookie != cookie)
continue;
first = false;
break;
}
hlist_add_head(&u->entry, idem_hash + hash);
spin_unlock(&idem_lock);
return !first;
}
/*
* We were the first one with 'cookie' on the list, and we ended
* up completing the operation. We now need to walk the list,
* remove everybody - which includes ourselves - fill in the return
* value, and then complete the operation.
*/
module: fix init_module_from_file() error handling Vegard Nossum pointed out two different problems with the error handling in init_module_from_file(): (a) the idempotent loading code didn't clean up properly in some error cases, leaving the on-stack 'struct idempotent' element still in the hash table (b) failure to read the module file would nonsensically update the 'invalid_kread_bytes' stat counter with the error value The first error is quite nasty, in that it can then cause subsequent idempotent loads of that same file to access stale stack contents of the previous failure. The case may not happen in any normal situation (explaining all the "Tested-by's on the original change), and requires admin privileges, but syzkaller triggers random bad behavior as a result: BUG: soft lockup in sys_finit_module BUG: unable to handle kernel paging request in init_module_from_file general protection fault in init_module_from_file INFO: task hung in init_module_from_file KASAN: out-of-bounds Read in init_module_from_file KASAN: slab-out-of-bounds Read in init_module_from_file ... The second error is fairly benign and just leads to nonsensical stats (and has been around since the debug stats were added). Vegard also provided a patch for the idempotent loading issue, but I'd rather re-organize the code and make it more legible using another level of helper functions than add the usual "goto out" error handling. Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/ Fixes: 9b9879fc0327 ("modules: catch concurrent module loads, treat them as idempotent") Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reported-by: syzbot+9c2bdc9d24e4a7abe741@syzkaller.appspotmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-04 13:37:32 +00:00
static int idempotent_complete(struct idempotent *u, int ret)
modules: catch concurrent module loads, treat them as idempotent This is the new-and-improved attempt at avoiding huge memory load spikes when the user space boot sequence tries to load hundreds (or even thousands) of redundant duplicate modules in parallel. See commit 9828ed3f695a ("module: error out early on concurrent load of the same module file") for background and an earlier failed attempt that was reverted. That earlier attempt just said "concurrently loading the same module is silly, just open the module file exclusively and return -ETXTBSY if somebody else is already loading it". While it is true that concurrent module loads of the same module is silly, the reason that earlier attempt then failed was that the concurrently loaded module would often be a prerequisite for another module. Thus failing to load the prerequisite would then cause cascading failures of the other modules, rather than just short-circuiting that one unnecessary module load. At the same time, we still really don't want to load the contents of the same module file hundreds of times, only to then wait for an eventually successful load, and have everybody else return -EEXIST. As a result, this takes another approach, and treats concurrent module loads from the same file as "idempotent" in the inode. So if one module load is ongoing, we don't start a new one, but instead just wait for the first one to complete and return the same return value as it did. So unlike the first attempt, this does not return early: the intent is not to speed up the boot, but to avoid a thundering herd problem in allocating memory (both physical and virtual) for a module more than once. Also note that this does change behavior: it used to be that when you had concurrent loads, you'd have one "winner" that would return success, and everybody else would return -EEXIST. In contrast, this idempotent logic goes all Oprah on the problem, and says "You are a winner! And you are a winner! We are ALL winners". But since there's no possible actual real semantic difference between "you loaded the module" and "somebody else already loaded the module", this is more of a feel-good change than an actual honest-to-goodness semantic change. Of course, any true Johnny-come-latelies that don't get caught in the concurrency filter will still return -EEXIST. It's no different from not even getting a seat at an Oprah taping. That's life. See the long thread on the kernel mailing list about this all, which includes some numbers for memory use before and after the patch. Link: https://lore.kernel.org/lkml/20230524213620.3509138-1-mcgrof@kernel.org/ Reviewed-by: Johan Hovold <johan@kernel.org> Tested-by: Johan Hovold <johan@kernel.org> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Rudi Heitbaum <rudi@heitbaum..com> Tested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-30 01:39:51 +00:00
{
const void *cookie = u->cookie;
int hash = hash_ptr(cookie, IDEM_HASH_BITS);
struct hlist_head *head = idem_hash + hash;
struct hlist_node *next;
struct idempotent *pos;
spin_lock(&idem_lock);
hlist_for_each_entry_safe(pos, next, head, entry) {
if (pos->cookie != cookie)
continue;
hlist_del(&pos->entry);
pos->ret = ret;
complete(&pos->complete);
}
spin_unlock(&idem_lock);
module: fix init_module_from_file() error handling Vegard Nossum pointed out two different problems with the error handling in init_module_from_file(): (a) the idempotent loading code didn't clean up properly in some error cases, leaving the on-stack 'struct idempotent' element still in the hash table (b) failure to read the module file would nonsensically update the 'invalid_kread_bytes' stat counter with the error value The first error is quite nasty, in that it can then cause subsequent idempotent loads of that same file to access stale stack contents of the previous failure. The case may not happen in any normal situation (explaining all the "Tested-by's on the original change), and requires admin privileges, but syzkaller triggers random bad behavior as a result: BUG: soft lockup in sys_finit_module BUG: unable to handle kernel paging request in init_module_from_file general protection fault in init_module_from_file INFO: task hung in init_module_from_file KASAN: out-of-bounds Read in init_module_from_file KASAN: slab-out-of-bounds Read in init_module_from_file ... The second error is fairly benign and just leads to nonsensical stats (and has been around since the debug stats were added). Vegard also provided a patch for the idempotent loading issue, but I'd rather re-organize the code and make it more legible using another level of helper functions than add the usual "goto out" error handling. Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/ Fixes: 9b9879fc0327 ("modules: catch concurrent module loads, treat them as idempotent") Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reported-by: syzbot+9c2bdc9d24e4a7abe741@syzkaller.appspotmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-04 13:37:32 +00:00
return ret;
modules: catch concurrent module loads, treat them as idempotent This is the new-and-improved attempt at avoiding huge memory load spikes when the user space boot sequence tries to load hundreds (or even thousands) of redundant duplicate modules in parallel. See commit 9828ed3f695a ("module: error out early on concurrent load of the same module file") for background and an earlier failed attempt that was reverted. That earlier attempt just said "concurrently loading the same module is silly, just open the module file exclusively and return -ETXTBSY if somebody else is already loading it". While it is true that concurrent module loads of the same module is silly, the reason that earlier attempt then failed was that the concurrently loaded module would often be a prerequisite for another module. Thus failing to load the prerequisite would then cause cascading failures of the other modules, rather than just short-circuiting that one unnecessary module load. At the same time, we still really don't want to load the contents of the same module file hundreds of times, only to then wait for an eventually successful load, and have everybody else return -EEXIST. As a result, this takes another approach, and treats concurrent module loads from the same file as "idempotent" in the inode. So if one module load is ongoing, we don't start a new one, but instead just wait for the first one to complete and return the same return value as it did. So unlike the first attempt, this does not return early: the intent is not to speed up the boot, but to avoid a thundering herd problem in allocating memory (both physical and virtual) for a module more than once. Also note that this does change behavior: it used to be that when you had concurrent loads, you'd have one "winner" that would return success, and everybody else would return -EEXIST. In contrast, this idempotent logic goes all Oprah on the problem, and says "You are a winner! And you are a winner! We are ALL winners". But since there's no possible actual real semantic difference between "you loaded the module" and "somebody else already loaded the module", this is more of a feel-good change than an actual honest-to-goodness semantic change. Of course, any true Johnny-come-latelies that don't get caught in the concurrency filter will still return -EEXIST. It's no different from not even getting a seat at an Oprah taping. That's life. See the long thread on the kernel mailing list about this all, which includes some numbers for memory use before and after the patch. Link: https://lore.kernel.org/lkml/20230524213620.3509138-1-mcgrof@kernel.org/ Reviewed-by: Johan Hovold <johan@kernel.org> Tested-by: Johan Hovold <johan@kernel.org> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Rudi Heitbaum <rudi@heitbaum..com> Tested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-30 01:39:51 +00:00
}
static int init_module_from_file(struct file *f, const char __user * uargs, int flags)
module: add syscall to load module from fd As part of the effort to create a stronger boundary between root and kernel, Chrome OS wants to be able to enforce that kernel modules are being loaded only from our read-only crypto-hash verified (dm_verity) root filesystem. Since the init_module syscall hands the kernel a module as a memory blob, no reasoning about the origin of the blob can be made. Earlier proposals for appending signatures to kernel modules would not be useful in Chrome OS, since it would involve adding an additional set of keys to our kernel and builds for no good reason: we already trust the contents of our root filesystem. We don't need to verify those kernel modules a second time. Having to do signature checking on module loading would slow us down and be redundant. All we need to know is where a module is coming from so we can say yes/no to loading it. If a file descriptor is used as the source of a kernel module, many more things can be reasoned about. In Chrome OS's case, we could enforce that the module lives on the filesystem we expect it to live on. In the case of IMA (or other LSMs), it would be possible, for example, to examine extended attributes that may contain signatures over the contents of the module. This introduces a new syscall (on x86), similar to init_module, that has only two arguments. The first argument is used as a file descriptor to the module and the second argument is a pointer to the NULL terminated string of module arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (merge fixes)
2012-10-15 21:01:07 +00:00
{
struct load_info info = { };
void *buf = NULL;
module: fix init_module_from_file() error handling Vegard Nossum pointed out two different problems with the error handling in init_module_from_file(): (a) the idempotent loading code didn't clean up properly in some error cases, leaving the on-stack 'struct idempotent' element still in the hash table (b) failure to read the module file would nonsensically update the 'invalid_kread_bytes' stat counter with the error value The first error is quite nasty, in that it can then cause subsequent idempotent loads of that same file to access stale stack contents of the previous failure. The case may not happen in any normal situation (explaining all the "Tested-by's on the original change), and requires admin privileges, but syzkaller triggers random bad behavior as a result: BUG: soft lockup in sys_finit_module BUG: unable to handle kernel paging request in init_module_from_file general protection fault in init_module_from_file INFO: task hung in init_module_from_file KASAN: out-of-bounds Read in init_module_from_file KASAN: slab-out-of-bounds Read in init_module_from_file ... The second error is fairly benign and just leads to nonsensical stats (and has been around since the debug stats were added). Vegard also provided a patch for the idempotent loading issue, but I'd rather re-organize the code and make it more legible using another level of helper functions than add the usual "goto out" error handling. Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/ Fixes: 9b9879fc0327 ("modules: catch concurrent module loads, treat them as idempotent") Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reported-by: syzbot+9c2bdc9d24e4a7abe741@syzkaller.appspotmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-04 13:37:32 +00:00
int len;
modules: catch concurrent module loads, treat them as idempotent This is the new-and-improved attempt at avoiding huge memory load spikes when the user space boot sequence tries to load hundreds (or even thousands) of redundant duplicate modules in parallel. See commit 9828ed3f695a ("module: error out early on concurrent load of the same module file") for background and an earlier failed attempt that was reverted. That earlier attempt just said "concurrently loading the same module is silly, just open the module file exclusively and return -ETXTBSY if somebody else is already loading it". While it is true that concurrent module loads of the same module is silly, the reason that earlier attempt then failed was that the concurrently loaded module would often be a prerequisite for another module. Thus failing to load the prerequisite would then cause cascading failures of the other modules, rather than just short-circuiting that one unnecessary module load. At the same time, we still really don't want to load the contents of the same module file hundreds of times, only to then wait for an eventually successful load, and have everybody else return -EEXIST. As a result, this takes another approach, and treats concurrent module loads from the same file as "idempotent" in the inode. So if one module load is ongoing, we don't start a new one, but instead just wait for the first one to complete and return the same return value as it did. So unlike the first attempt, this does not return early: the intent is not to speed up the boot, but to avoid a thundering herd problem in allocating memory (both physical and virtual) for a module more than once. Also note that this does change behavior: it used to be that when you had concurrent loads, you'd have one "winner" that would return success, and everybody else would return -EEXIST. In contrast, this idempotent logic goes all Oprah on the problem, and says "You are a winner! And you are a winner! We are ALL winners". But since there's no possible actual real semantic difference between "you loaded the module" and "somebody else already loaded the module", this is more of a feel-good change than an actual honest-to-goodness semantic change. Of course, any true Johnny-come-latelies that don't get caught in the concurrency filter will still return -EEXIST. It's no different from not even getting a seat at an Oprah taping. That's life. See the long thread on the kernel mailing list about this all, which includes some numbers for memory use before and after the patch. Link: https://lore.kernel.org/lkml/20230524213620.3509138-1-mcgrof@kernel.org/ Reviewed-by: Johan Hovold <johan@kernel.org> Tested-by: Johan Hovold <johan@kernel.org> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Rudi Heitbaum <rudi@heitbaum..com> Tested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-30 01:39:51 +00:00
len = kernel_read_file(f, 0, &buf, INT_MAX, NULL, READING_MODULE);
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
if (len < 0) {
mod_stat_inc(&failed_kreads);
return len;
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
}
if (flags & MODULE_INIT_COMPRESSED_FILE) {
int err = module_decompress(&info, buf, len);
vfree(buf); /* compressed data is no longer needed */
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
if (err) {
mod_stat_inc(&failed_decompress);
mod_stat_add_long(len, &invalid_decompress_bytes);
return err;
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
}
} else {
info.hdr = buf;
info.len = len;
}
module: fix init_module_from_file() error handling Vegard Nossum pointed out two different problems with the error handling in init_module_from_file(): (a) the idempotent loading code didn't clean up properly in some error cases, leaving the on-stack 'struct idempotent' element still in the hash table (b) failure to read the module file would nonsensically update the 'invalid_kread_bytes' stat counter with the error value The first error is quite nasty, in that it can then cause subsequent idempotent loads of that same file to access stale stack contents of the previous failure. The case may not happen in any normal situation (explaining all the "Tested-by's on the original change), and requires admin privileges, but syzkaller triggers random bad behavior as a result: BUG: soft lockup in sys_finit_module BUG: unable to handle kernel paging request in init_module_from_file general protection fault in init_module_from_file INFO: task hung in init_module_from_file KASAN: out-of-bounds Read in init_module_from_file KASAN: slab-out-of-bounds Read in init_module_from_file ... The second error is fairly benign and just leads to nonsensical stats (and has been around since the debug stats were added). Vegard also provided a patch for the idempotent loading issue, but I'd rather re-organize the code and make it more legible using another level of helper functions than add the usual "goto out" error handling. Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/ Fixes: 9b9879fc0327 ("modules: catch concurrent module loads, treat them as idempotent") Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reported-by: syzbot+9c2bdc9d24e4a7abe741@syzkaller.appspotmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-04 13:37:32 +00:00
return load_module(&info, uargs, flags);
}
static int idempotent_init_module(struct file *f, const char __user * uargs, int flags)
{
struct idempotent idem;
if (!f || !(f->f_mode & FMODE_READ))
return -EBADF;
/* See if somebody else is doing the operation? */
if (idempotent(&idem, file_inode(f))) {
wait_for_completion(&idem.complete);
return idem.ret;
}
/* Otherwise, we'll do it and complete others */
return idempotent_complete(&idem,
init_module_from_file(f, uargs, flags));
}
SYSCALL_DEFINE3(finit_module, int, fd, const char __user *, uargs, int, flags)
{
int err;
struct fd f;
err = may_init_module();
if (err)
return err;
pr_debug("finit_module: fd=%d, uargs=%p, flags=%i\n", fd, uargs, flags);
if (flags & ~(MODULE_INIT_IGNORE_MODVERSIONS
|MODULE_INIT_IGNORE_VERMAGIC
|MODULE_INIT_COMPRESSED_FILE))
return -EINVAL;
f = fdget(fd);
module: fix init_module_from_file() error handling Vegard Nossum pointed out two different problems with the error handling in init_module_from_file(): (a) the idempotent loading code didn't clean up properly in some error cases, leaving the on-stack 'struct idempotent' element still in the hash table (b) failure to read the module file would nonsensically update the 'invalid_kread_bytes' stat counter with the error value The first error is quite nasty, in that it can then cause subsequent idempotent loads of that same file to access stale stack contents of the previous failure. The case may not happen in any normal situation (explaining all the "Tested-by's on the original change), and requires admin privileges, but syzkaller triggers random bad behavior as a result: BUG: soft lockup in sys_finit_module BUG: unable to handle kernel paging request in init_module_from_file general protection fault in init_module_from_file INFO: task hung in init_module_from_file KASAN: out-of-bounds Read in init_module_from_file KASAN: slab-out-of-bounds Read in init_module_from_file ... The second error is fairly benign and just leads to nonsensical stats (and has been around since the debug stats were added). Vegard also provided a patch for the idempotent loading issue, but I'd rather re-organize the code and make it more legible using another level of helper functions than add the usual "goto out" error handling. Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/ Fixes: 9b9879fc0327 ("modules: catch concurrent module loads, treat them as idempotent") Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reported-by: syzbot+9c2bdc9d24e4a7abe741@syzkaller.appspotmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-04 13:37:32 +00:00
err = idempotent_init_module(f.file, uargs, flags);
fdput(f);
return err;
}
taint/module: Clean up global and module taint flags handling The commit 66cc69e34e86a231 ("Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE") updated module_taint_flags() to potentially print one more character. But it did not increase the size of the corresponding buffers in m_show() and print_modules(). We have recently done the same mistake when adding a taint flag for livepatching, see https://lkml.kernel.org/r/cfba2c823bb984690b73572aaae1db596b54a082.1472137475.git.jpoimboe@redhat.com Also struct module uses an incompatible type for mod-taints flags. It survived from the commit 2bc2d61a9638dab670d ("[PATCH] list module taint flags in Oops/panic"). There was used "int" for the global taint flags at these times. But only the global tain flags was later changed to "unsigned long" by the commit 25ddbb18aae33ad2 ("Make the taint flags reliable"). This patch defines TAINT_FLAGS_COUNT that can be used to create arrays and buffers of the right size. Note that we could not use enum because the taint flag indexes are used also in assembly code. Then it reworks the table that describes the taint flags. The TAINT_* numbers can be used as the index. Instead, we add information if the taint flag is also shown per-module. Finally, it uses "unsigned long", bit operations, and the updated taint_flags table also for mod->taints. It is not optimal because only few taint flags can be printed by module_taint_flags(). But better be on the safe side. IMHO, it is not worth the optimization and this is a good compromise. Signed-off-by: Petr Mladek <pmladek@suse.com> Link: http://lkml.kernel.org/r/1474458442-21581-1-git-send-email-pmladek@suse.com [jeyu@redhat.com: fix broken lkml link in changelog] Signed-off-by: Jessica Yu <jeyu@redhat.com>
2016-09-21 11:47:22 +00:00
/* Keep in sync with MODULE_FLAGS_BUF_SIZE !!! */
char *module_flags(struct module *mod, char *buf, bool show_state)
{
int bx = 0;
BUG_ON(mod->state == MODULE_STATE_UNFORMED);
if (!mod->taints && !show_state)
goto out;
if (mod->taints ||
mod->state == MODULE_STATE_GOING ||
mod->state == MODULE_STATE_COMING) {
buf[bx++] = '(';
bx += module_flags_taint(mod->taints, buf + bx);
/* Show a - for module-is-being-unloaded */
if (mod->state == MODULE_STATE_GOING && show_state)
buf[bx++] = '-';
/* Show a + for module-is-being-loaded */
if (mod->state == MODULE_STATE_COMING && show_state)
buf[bx++] = '+';
buf[bx++] = ')';
}
out:
buf[bx] = '\0';
return buf;
}
/* Given an address, look for it in the module exception tables. */
const struct exception_table_entry *search_module_extables(unsigned long addr)
{
const struct exception_table_entry *e = NULL;
struct module *mod;
preempt_disable();
mod = __module_address(addr);
if (!mod)
goto out;
if (!mod->num_exentries)
goto out;
e = search_extable(mod->extable,
mod->num_exentries,
addr);
out:
preempt_enable();
/*
* Now, if we found one, we are running inside it now, hence
* we cannot unload the module, hence no refcnt needed.
*/
return e;
}
/**
* is_module_address() - is this address inside a module?
* @addr: the address to check.
*
* See is_module_text_address() if you simply want to see if the address
* is code (not data).
*/
bool is_module_address(unsigned long addr)
{
bool ret;
preempt_disable();
ret = __module_address(addr) != NULL;
preempt_enable();
return ret;
}
/**
* __module_address() - get the module which contains an address.
* @addr: the address.
*
* Must be called with preempt disabled or module mutex held so that
* module doesn't get freed during this.
*/
struct module *__module_address(unsigned long addr)
{
struct module *mod;
if (addr >= mod_tree.addr_min && addr <= mod_tree.addr_max)
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
goto lookup;
#ifdef CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
if (addr >= mod_tree.data_addr_min && addr <= mod_tree.data_addr_max)
goto lookup;
#endif
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
return NULL;
lookup:
module_assert_mutex_or_preempt();
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
mod = mod_find(addr, &mod_tree);
if (mod) {
BUG_ON(!within_module(addr, mod));
if (mod->state == MODULE_STATE_UNFORMED)
mod = NULL;
}
return mod;
}
/**
* is_module_text_address() - is this address inside module code?
* @addr: the address to check.
*
* See is_module_address() if you simply want to see if the address is
* anywhere in a module. See kernel_text_address() for testing if an
* address corresponds to kernel or module code.
*/
bool is_module_text_address(unsigned long addr)
{
bool ret;
preempt_disable();
ret = __module_text_address(addr) != NULL;
preempt_enable();
return ret;
}
/**
* __module_text_address() - get the module whose code contains an address.
* @addr: the address.
*
* Must be called with preempt disabled or module mutex held so that
* module doesn't get freed during this.
*/
struct module *__module_text_address(unsigned long addr)
{
struct module *mod = __module_address(addr);
if (mod) {
/* Make sure it's within the text section. */
module: replace module_layout with module_memory module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-07 00:28:02 +00:00
if (!within_module_mem_type(addr, mod, MOD_TEXT) &&
!within_module_mem_type(addr, mod, MOD_INIT_TEXT))
mod = NULL;
}
return mod;
}
/* Don't grab lock, we're oopsing. */
void print_modules(void)
{
struct module *mod;
taint/module: Clean up global and module taint flags handling The commit 66cc69e34e86a231 ("Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE") updated module_taint_flags() to potentially print one more character. But it did not increase the size of the corresponding buffers in m_show() and print_modules(). We have recently done the same mistake when adding a taint flag for livepatching, see https://lkml.kernel.org/r/cfba2c823bb984690b73572aaae1db596b54a082.1472137475.git.jpoimboe@redhat.com Also struct module uses an incompatible type for mod-taints flags. It survived from the commit 2bc2d61a9638dab670d ("[PATCH] list module taint flags in Oops/panic"). There was used "int" for the global taint flags at these times. But only the global tain flags was later changed to "unsigned long" by the commit 25ddbb18aae33ad2 ("Make the taint flags reliable"). This patch defines TAINT_FLAGS_COUNT that can be used to create arrays and buffers of the right size. Note that we could not use enum because the taint flag indexes are used also in assembly code. Then it reworks the table that describes the taint flags. The TAINT_* numbers can be used as the index. Instead, we add information if the taint flag is also shown per-module. Finally, it uses "unsigned long", bit operations, and the updated taint_flags table also for mod->taints. It is not optimal because only few taint flags can be printed by module_taint_flags(). But better be on the safe side. IMHO, it is not worth the optimization and this is a good compromise. Signed-off-by: Petr Mladek <pmladek@suse.com> Link: http://lkml.kernel.org/r/1474458442-21581-1-git-send-email-pmladek@suse.com [jeyu@redhat.com: fix broken lkml link in changelog] Signed-off-by: Jessica Yu <jeyu@redhat.com>
2016-09-21 11:47:22 +00:00
char buf[MODULE_FLAGS_BUF_SIZE];
printk(KERN_DEFAULT "Modules linked in:");
/* Most callers should already have preempt disabled, but make sure */
preempt_disable();
list_for_each_entry_rcu(mod, &modules, list) {
if (mod->state == MODULE_STATE_UNFORMED)
continue;
pr_cont(" %s%s", mod->name, module_flags(mod, buf, true));
}
print_unloaded_tainted_modules();
preempt_enable();
if (last_unloaded_module.name[0])
pr_cont(" [last unloaded: %s%s]", last_unloaded_module.name,
last_unloaded_module.taints);
pr_cont("\n");
}
module: add debug stats to help identify memory pressure Loading modules with finit_module() can end up using vmalloc(), vmap() and vmalloc() again, for a total of up to 3 separate allocations in the worst case for a single module. We always kernel_read*() the module, that's a vmalloc(). Then vmap() is used for the module decompression, and if so the last read buffer is freed as we use the now decompressed module buffer to stuff data into our copy module. The last allocation is specific to each architectures but pretty much that's generally a series of vmalloc() calls or a variation of vmalloc to handle ELF sections with special permissions. Evaluation with new stress-ng module support [1] with just 100 ops is proving that you can end up using GiBs of data easily even with all care we have in the kernel and userspace today in trying to not load modules which are already loaded. 100 ops seems to resemble the sort of pressure a system with about 400 CPUs can create on module loading. Although issues relating to duplicate module requests due to each CPU inucurring a new module reuest is silly and some of these are being fixed, we currently lack proper tooling to help diagnose easily what happened, when it happened and who likely is to blame -- userspace or kernel module autoloading. Provide an initial set of stats which use debugfs to let us easily scrape post-boot information about failed loads. This sort of information can be used on production worklaods to try to optimize *avoiding* redundant memory pressure using finit_module(). There's a few examples that can be provided: A 255 vCPU system without the next patch in this series applied: Startup finished in 19.143s (kernel) + 7.078s (userspace) = 26.221s graphical.target reached after 6.988s in userspace And 13.58 GiB of virtual memory space lost due to failed module loading: root@big ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 0 Mods failed on load 1411 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 0 Failed kmod bytes 14588526272 Virtual mem wasted bytes 14588526272 Average mod size 171115 Average mod text size 62602 Average fail load bytes 10339140 Duplicate failed modules: module-name How-many-times Reason kvm_intel 249 Load kvm 249 Load irqbypass 8 Load crct10dif_pclmul 128 Load ghash_clmulni_intel 27 Load sha512_ssse3 50 Load sha512_generic 200 Load aesni_intel 249 Load crypto_simd 41 Load cryptd 131 Load evdev 2 Load serio_raw 1 Load virtio_pci 3 Load nvme 3 Load nvme_core 3 Load virtio_pci_legacy_dev 3 Load virtio_pci_modern_dev 3 Load t10_pi 3 Load virtio 3 Load crc32_pclmul 6 Load crc64_rocksoft 3 Load crc32c_intel 40 Load virtio_ring 3 Load crc64 3 Load The following screen shot, of a simple 8vcpu 8 GiB KVM guest with the next patch in this series applied, shows 226.53 MiB are wasted in virtual memory allocations which due to duplicate module requests during boot. It also shows an average module memory size of 167.10 KiB and an an average module .text + .init.text size of 61.13 KiB. The end shows all modules which were detected as duplicate requests and whether or not they failed early after just the first kernel_read*() call or late after we've already allocated the private space for the module in layout_and_allocate(). A system with module decompression would reveal more wasted virtual memory space. We should put effort now into identifying the source of these duplicate module requests and trimming these down as much possible. Larger systems will obviously show much more wasted virtual memory allocations. root@kmod ~ # cat /sys/kernel/debug/modules/stats Mods ever loaded 67 Mods failed on kread 0 Mods failed on decompress 0 Mods failed on becoming 83 Mods failed on load 16 Total module size 11464704 Total mod text size 4194304 Failed kread bytes 0 Failed decompress bytes 0 Failed becoming bytes 228959096 Failed kmod bytes 8578080 Virtual mem wasted bytes 237537176 Average mod size 171115 Average mod text size 62602 Avg fail becoming bytes 2758544 Average fail load bytes 536130 Duplicate failed modules: module-name How-many-times Reason kvm_intel 7 Becoming kvm 7 Becoming irqbypass 6 Becoming & Load crct10dif_pclmul 7 Becoming & Load ghash_clmulni_intel 7 Becoming & Load sha512_ssse3 6 Becoming & Load sha512_generic 7 Becoming & Load aesni_intel 7 Becoming crypto_simd 7 Becoming & Load cryptd 3 Becoming & Load evdev 1 Becoming serio_raw 1 Becoming nvme 3 Becoming nvme_core 3 Becoming t10_pi 3 Becoming virtio_pci 3 Becoming crc32_pclmul 6 Becoming & Load crc64_rocksoft 3 Becoming crc32c_intel 3 Becoming virtio_pci_modern_dev 2 Becoming virtio_pci_legacy_dev 1 Becoming crc64 2 Becoming virtio 2 Becoming virtio_ring 2 Becoming [0] https://github.com/ColinIanKing/stress-ng.git [1] echo 0 > /proc/sys/vm/oom_dump_tasks ./stress-ng --module 100 --module-name xfs Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-03-29 03:03:19 +00:00
#ifdef CONFIG_MODULE_DEBUGFS
struct dentry *mod_debugfs_root;
static int module_debugfs_init(void)
{
mod_debugfs_root = debugfs_create_dir("modules", NULL);
return 0;
}
module_init(module_debugfs_init);
#endif