Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-17 01:22:07 +00:00
Code Issues Packages Projects Releases Wiki Activity
8e5fc1a732
linux/arch/x86/kernel/entry_64.S

1562 lines
38 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* linux/arch/x86_64/entry.S
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
*/
/*
* entry.S contains the system-call and fault low-level handling routines.
*
* NOTE: This code handles signal-recognition, which happens every time
* after an interrupt and after each system call.
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
*
* Normal syscalls and interrupts don't save a full stack frame, this is
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* only done for syscall tracing, signals or fork/exec et.al.
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
*
* A note on terminology:
* - top of stack: Architecture defined interrupt frame from SS to RIP
* at the top of the kernel process stack.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* - partial stack frame: partially saved registers upto R11.
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
* - full stack frame: Like partial stack frame, but all register saved.
[PATCH] Add some comments to entry.S And remove some old obsolete ones. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:29 +00:00
*
* Some macro usage:
* - CFI macros are used to generate dwarf2 unwind information for better
* backtraces. They don't change any code.
* - SAVE_ALL/RESTORE_ALL - Save/restore all registers
* - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify.
* There are unfortunately lots of special cases where some registers
* not touched. The macro is a big mess that should be cleaned up.
* - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS.
* Gives a full stack frame.
* - ENTRY/END Define functions in the symbol table.
* - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack
* frame that is otherwise undefined after a SYSCALL
* - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
* - errorentry/paranoidentry/zeroentry - Define exception entry points.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/cache.h>
#include <asm/errno.h>
#include <asm/dwarf2.h>
#include <asm/calling.h>
kbuild: alpha,x86_64 use generic asm-offsets.h support Delete obsolete stuff from arch makefiles Rename .h file to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 19:28:48 +00:00
#include <asm/asm-offsets.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/msr.h>
#include <asm/unistd.h>
#include <asm/thread_info.h>
#include <asm/hw_irq.h>
x86: use _types.h headers in asm where available In general, the only definitions that assembly files can use are in _types.S headers (where available), so convert them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-13 19:14:01 +00:00
#include <asm/page_types.h>
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
#include <asm/irqflags.h>
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
#include <asm/paravirt.h>
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-21 18:17:27 +00:00
#include <asm/ftrace.h>
x86: merge 64 and 32 SMP percpu handling Now that pda is allocated as part of percpu, percpu doesn't need to be accessed through pda. Unify x86_64 SMP percpu access with x86_32 SMP one. Other than the segment register, operand size and the base of percpu symbols, they behave identical now. This patch replaces now unnecessary pda->data_offset with a dummy field which is necessary to keep stack_canary at its place. This patch also moves per_cpu_offset initialization out of init_gdt() into setup_per_cpu_areas(). Note that this change also necessitates explicit per_cpu_offset initializations in voyager_smp.c. With this change, x86_OP_percpu()'s are as efficient on x86_64 as on x86_32 and also x86_64 can use assembly PER_CPU macros. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-13 11:41:35 +00:00
#include <asm/percpu.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 22:37:04 +00:00
/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
#include <linux/elf-em.h>
#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
#define __AUDIT_ARCH_64BIT 0x80000000
#define __AUDIT_ARCH_LE 0x40000000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.code64
ftrace: rename FTRACE to FUNCTION_TRACER Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-06 23:06:12 +00:00
#ifdef CONFIG_FUNCTION_TRACER
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(mcount)
retq
END(mcount)
ENTRY(ftrace_caller)
ftrace: add quick function trace stop Impact: quick start and stop of function tracer This patch adds a way to disable the function tracer quickly without the need to run kstop_machine. It adds a new variable called function_trace_stop which will stop the calls to functions from mcount when set. This is just an on/off switch and does not handle recursion like preempt_disable(). It's main purpose is to help other tracers/debuggers start and stop tracing fuctions without the need to call kstop_machine. The config option HAVE_FUNCTION_TRACE_MCOUNT_TEST is added for archs that implement the testing of the function_trace_stop in the mcount arch dependent code. Otherwise, the test is done in the C code. x86 is the only arch at the moment that supports this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-05 21:05:44 +00:00
cmpl $0, function_trace_stop
jne ftrace_stub
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
x86: entry_64 - introduce FTRACE_ frame macro v2 Impact: clean up Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to save a number of lines on source level. Also fix a comment in ftrace.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 21:09:08 +00:00
MCOUNT_SAVE_FRAME
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
movq 0x38(%rsp), %rdi
movq 8(%rbp), %rsi
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-21 18:17:27 +00:00
subq $MCOUNT_INSN_SIZE, %rdi
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
x86: head_64.S - use GLOBAL macro Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: heukelum@fastmail.fm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 19:57:01 +00:00
GLOBAL(ftrace_call)
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
call ftrace_stub
x86: entry_64 - introduce FTRACE_ frame macro v2 Impact: clean up Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to save a number of lines on source level. Also fix a comment in ftrace.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 21:09:08 +00:00
MCOUNT_RESTORE_FRAME
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
x86: head_64.S - use GLOBAL macro Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: heukelum@fastmail.fm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 19:57:01 +00:00
GLOBAL(ftrace_graph_call)
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
jmp ftrace_stub
#endif
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
x86: head_64.S - use GLOBAL macro Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: heukelum@fastmail.fm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 19:57:01 +00:00
GLOBAL(ftrace_stub)
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
retq
END(ftrace_caller)
#else /* ! CONFIG_DYNAMIC_FTRACE */
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
ENTRY(mcount)
ftrace: add quick function trace stop Impact: quick start and stop of function tracer This patch adds a way to disable the function tracer quickly without the need to run kstop_machine. It adds a new variable called function_trace_stop which will stop the calls to functions from mcount when set. This is just an on/off switch and does not handle recursion like preempt_disable(). It's main purpose is to help other tracers/debuggers start and stop tracing fuctions without the need to call kstop_machine. The config option HAVE_FUNCTION_TRACE_MCOUNT_TEST is added for archs that implement the testing of the function_trace_stop in the mcount arch dependent code. Otherwise, the test is done in the C code. x86 is the only arch at the moment that supports this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-05 21:05:44 +00:00
cmpl $0, function_trace_stop
jne ftrace_stub
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
cmpq $ftrace_stub, ftrace_trace_function
jnz trace
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
cmpq $ftrace_stub, ftrace_graph_return
jnz ftrace_graph_caller
ftrace: function graph return for function entry Impact: feature, let entry function decide to trace or not This patch lets the graph tracer entry function decide if the tracing should be done at the end as well. This requires all function graph entry functions return 1 if it should trace, or 0 if the return should not be traced. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 04:50:05 +00:00
cmpq $ftrace_graph_entry_stub, ftrace_graph_entry
jnz ftrace_graph_caller
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
#endif
x86: head_64.S - use GLOBAL macro Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: heukelum@fastmail.fm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 19:57:01 +00:00
GLOBAL(ftrace_stub)
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
retq
trace:
x86: entry_64 - introduce FTRACE_ frame macro v2 Impact: clean up Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to save a number of lines on source level. Also fix a comment in ftrace.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 21:09:08 +00:00
MCOUNT_SAVE_FRAME
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
movq 0x38(%rsp), %rdi
movq 8(%rbp), %rsi
ftrace: store mcount address in rec->ip Record the address of the mcount call-site. Currently all archs except sparc64 record the address of the instruction following the mcount call-site. Some general cleanups are entailed. Storing mcount addresses in rec->ip enables looking them up in the kprobe hash table later on to check if they're kprobe'd. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: davem@davemloft.net Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-21 18:17:27 +00:00
subq $MCOUNT_INSN_SIZE, %rdi
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
call *ftrace_trace_function
x86: entry_64 - introduce FTRACE_ frame macro v2 Impact: clean up Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to save a number of lines on source level. Also fix a comment in ftrace.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 21:09:08 +00:00
MCOUNT_RESTORE_FRAME
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
jmp ftrace_stub
END(mcount)
ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:43 +00:00
#endif /* CONFIG_DYNAMIC_FTRACE */
ftrace: rename FTRACE to FUNCTION_TRACER Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-06 23:06:12 +00:00
#endif /* CONFIG_FUNCTION_TRACER */
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
ENTRY(ftrace_graph_caller)
cmpl $0, function_trace_stop
jne ftrace_stub
x86: entry_64 - introduce FTRACE_ frame macro v2 Impact: clean up Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to save a number of lines on source level. Also fix a comment in ftrace.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 21:09:08 +00:00
MCOUNT_SAVE_FRAME
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
leaq 8(%rbp), %rdi
movq 0x38(%rsp), %rsi
function-graph: add stack frame test In case gcc does something funny with the stack frames, or the return from function code, we would like to detect that. An arch may implement passing of a variable that is unique to the function and can be saved on entering a function and can be tested when exiting the function. Usually the frame pointer can be used for this purpose. This patch also implements this for x86. Where it passes in the stack frame of the parent function, and will test that frame on exit. There was a case in x86_32 with optimize for size (-Os) where, for a few functions, gcc would align the stack frame and place a copy of the return address into it. The function graph tracer modified the copy and not the actual return address. On return from the funtion, it did not go to the tracer hook, but returned to the parent. This broke the function graph tracer, because the return of the parent (where gcc did not do this funky manipulation) returned to the location that the child function was suppose to. This caused strange kernel crashes. This test detected the problem and pointed out where the issue was. This modifies the parameters of one of the functions that the arch specific code calls, so it includes changes to arch code to accommodate the new prototype. Note, I notice that the parsic arch implements its own push_return_trace. This is now a generic function and the ftrace_push_return_trace should be used instead. This patch does not touch that code. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Helge Deller <deller@gmx.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-18 16:45:08 +00:00
movq (%rbp), %rdx
ftrace: have function graph use mcount caller address Impact: consistency change for function graph This patch makes function graph record the mcount caller address the same way the function tracer does. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 20:34:09 +00:00
subq $MCOUNT_INSN_SIZE, %rsi
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
call prepare_ftrace_return
x86: entry_64 - introduce FTRACE_ frame macro v2 Impact: clean up Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to save a number of lines on source level. Also fix a comment in ftrace.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 21:09:08 +00:00
MCOUNT_RESTORE_FRAME
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
retq
END(ftrace_graph_caller)
x86: head_64.S - use GLOBAL macro Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: heukelum@fastmail.fm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 19:57:01 +00:00
GLOBAL(return_to_handler)
tracing/function-graph: x86_64 stack allocation cleanup Only 24 bytes needs to be reserved on the stack for the function graph tracer on x86_64. Signed-off-by: Jiri Olsa <jolsa@redhat.com> LKML-Reference: <20090729085837.GB4998@jolsa.lab.eng.brq.redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-07-29 08:58:37 +00:00
subq $24, %rsp
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
x86, function-graph: only save return values on x86_64 Impact: speed up The return to handler portion of the function graph tracer should only need to save the return values. The caller already saved off the registers that the callee can modify. The returning function already saved the registers it modified. When we call our own trace function it too will save the registers that the callee must restore. There's no reason to save off anything more that the registers used to return the values. Note, I did a complete kernel build with this modification and the function graph tracer running on x86_64. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 18:30:04 +00:00
/* Save the return values */
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
movq %rax, (%rsp)
x86, function-graph: only save return values on x86_64 Impact: speed up The return to handler portion of the function graph tracer should only need to save the return values. The caller already saved off the registers that the callee can modify. The returning function already saved the registers it modified. When we call our own trace function it too will save the registers that the callee must restore. There's no reason to save off anything more that the registers used to return the values. Note, I did a complete kernel build with this modification and the function graph tracer running on x86_64. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 18:30:04 +00:00
movq %rdx, 8(%rsp)
function-graph: add stack frame test In case gcc does something funny with the stack frames, or the return from function code, we would like to detect that. An arch may implement passing of a variable that is unique to the function and can be saved on entering a function and can be tested when exiting the function. Usually the frame pointer can be used for this purpose. This patch also implements this for x86. Where it passes in the stack frame of the parent function, and will test that frame on exit. There was a case in x86_32 with optimize for size (-Os) where, for a few functions, gcc would align the stack frame and place a copy of the return address into it. The function graph tracer modified the copy and not the actual return address. On return from the funtion, it did not go to the tracer hook, but returned to the parent. This broke the function graph tracer, because the return of the parent (where gcc did not do this funky manipulation) returned to the location that the child function was suppose to. This caused strange kernel crashes. This test detected the problem and pointed out where the issue was. This modifies the parameters of one of the functions that the arch specific code calls, so it includes changes to arch code to accommodate the new prototype. Note, I notice that the parsic arch implements its own push_return_trace. This is now a generic function and the ftrace_push_return_trace should be used instead. This patch does not touch that code. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Helge Deller <deller@gmx.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-18 16:45:08 +00:00
movq %rbp, %rdi
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
call ftrace_return_to_handler
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
function-graph/x86: Replace unbalanced ret with jmp The function graph tracer replaces the return address with a hook to trace the exit of the function call. This hook will finish by returning to the real location the function should return to. But the current implementation uses a ret to jump to the real return location. This causes a imbalance between calls and ret. That is the original function does a call, the ret goes to the handler and then the handler does a ret without a matching call. Although the function graph tracer itself still breaks the branch predictor by replacing the original ret, by using a second ret and causing an imbalance, it breaks the predictor even more. This patch replaces the ret with a jmp to keep the calls and ret balanced. I tested this on one box and it showed a 1.7% increase in performance. Another box only showed a small 0.3% increase. But no box that I tested this on showed a decrease in performance by making this change. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091013203425.042034383@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-13 20:33:50 +00:00
movq %rax, %rdi
x86, function-graph: only save return values on x86_64 Impact: speed up The return to handler portion of the function graph tracer should only need to save the return values. The caller already saved off the registers that the callee can modify. The returning function already saved the registers it modified. When we call our own trace function it too will save the registers that the callee must restore. There's no reason to save off anything more that the registers used to return the values. Note, I did a complete kernel build with this modification and the function graph tracer running on x86_64. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 18:30:04 +00:00
movq 8(%rsp), %rdx
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
movq (%rsp), %rax
function-graph/x86: Replace unbalanced ret with jmp The function graph tracer replaces the return address with a hook to trace the exit of the function call. This hook will finish by returning to the real location the function should return to. But the current implementation uses a ret to jump to the real return location. This causes a imbalance between calls and ret. That is the original function does a call, the ret goes to the handler and then the handler does a ret without a matching call. Although the function graph tracer itself still breaks the branch predictor by replacing the original ret, by using a second ret and causing an imbalance, it breaks the predictor even more. This patch replaces the ret with a jmp to keep the calls and ret balanced. I tested this on one box and it showed a 1.7% increase in performance. Another box only showed a small 0.3% increase. But no box that I tested this on showed a decrease in performance by making this change. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091013203425.042034383@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-13 20:33:50 +00:00
addq $24, %rsp
jmp *%rdi
tracing/function-graph-tracer: support for x86-64 Impact: extend and enable the function graph tracer to 64-bit x86 This patch implements the support for function graph tracer under x86-64. Both static and dynamic tracing are supported. This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I wanted to use probe_kernel_read/write to make the return address saving/patching code more generic but it causes tracing recursion. That would be perhaps useful to implement a notrace version of these function for other archs ports. Note that arch/x86/process_64.c is not traced, as in X86-32. I first thought __switch_to() was responsible of crashes during tracing because I believed current task were changed inside but that's actually not the case (actually yes, but not the "current" pointer). So I will have to investigate to find the functions that harm here, to enable tracing of the other functions inside (but there is no issue at this time, while process_64.c stays out of -pg flags). A little possible race condition is fixed inside this patch too. When the tracer allocate a return stack dynamically, the current depth is not initialized before but after. An interrupt could occur at this time and, after seeing that the return stack is allocated, the tracer could try to trace it with a random uninitialized depth. It's a prevention, even if I hadn't problems with it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-01 23:20:39 +00:00
#endif
ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:20:42 +00:00
[PATCH] x86_64: Remove unused macro in preempt support Remove unused macro in preempt support Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:25:05 +00:00
#ifndef CONFIG_PREEMPT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define retint_kernel retint_restore_args
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
#endif
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
#ifdef CONFIG_PARAVIRT
x86/paravirt: add sysret/sysexit pvops for returning to 32-bit compatibility userspace In a 64-bit system, we need separate sysret/sysexit operations to return to a 32-bit userspace. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:28 +00:00
ENTRY(native_usergs_sysret64)
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
swapgs
sysretq
x86: entry_64.S - add missing ENDPROC native_usergs_sysret64 is described as extern void native_usergs_sysret64(void) so lets add ENDPROC here Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: heukelum@fastmail.fm Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 19:57:00 +00:00
ENDPROC(native_usergs_sysret64)
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
#endif /* CONFIG_PARAVIRT */
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
.macro TRACE_IRQS_IRETQ offset=ARGOFFSET
#ifdef CONFIG_TRACE_IRQFLAGS
bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */
jnc 1f
TRACE_IRQS_ON
1:
#endif
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
* C code is not supposed to know about undefined top of stack. Every time
* a C function with an pt_regs argument is called from the SYSCALL based
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* fast path FIXUP_TOP_OF_STACK is needed.
* RESTORE_TOP_OF_STACK syncs the syscall state after any possible ptregs
* manipulation.
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
*/
/* %rsp:at FRAMEEND */
x86: introduce save_rest and restructure the PTREGSCALL macro in entry_64.S Impact: cleanup The save_rest function completes a partial stack frame for use by the PTREGSCALL macro. This also avoids the indirect call in PTREGSCALLs. This adds the macro movq_cfi_restore to hide the CFI_RESTORE annotation when restoring a register from the stack frame. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:41:55 +00:00
.macro FIXUP_TOP_OF_STACK tmp offset=0
x86-64: Move oldrsp from PDA to per-cpu. tj: * in asm-offsets_64.c, pda.h inclusion shouldn't be removed as pda is still referenced in the file * s/oldrsp/old_rsp/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
movq PER_CPU_VAR(old_rsp),\tmp
x86: introduce save_rest and restructure the PTREGSCALL macro in entry_64.S Impact: cleanup The save_rest function completes a partial stack frame for use by the PTREGSCALL macro. This also avoids the indirect call in PTREGSCALLs. This adds the macro movq_cfi_restore to hide the CFI_RESTORE annotation when restoring a register from the stack frame. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:41:55 +00:00
movq \tmp,RSP+\offset(%rsp)
movq $__USER_DS,SS+\offset(%rsp)
movq $__USER_CS,CS+\offset(%rsp)
movq $-1,RCX+\offset(%rsp)
movq R11+\offset(%rsp),\tmp /* get eflags */
movq \tmp,EFLAGS+\offset(%rsp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.endm
x86: introduce save_rest and restructure the PTREGSCALL macro in entry_64.S Impact: cleanup The save_rest function completes a partial stack frame for use by the PTREGSCALL macro. This also avoids the indirect call in PTREGSCALLs. This adds the macro movq_cfi_restore to hide the CFI_RESTORE annotation when restoring a register from the stack frame. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:41:55 +00:00
.macro RESTORE_TOP_OF_STACK tmp offset=0
movq RSP+\offset(%rsp),\tmp
x86-64: Move oldrsp from PDA to per-cpu. tj: * in asm-offsets_64.c, pda.h inclusion shouldn't be removed as pda is still referenced in the file * s/oldrsp/old_rsp/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
movq \tmp,PER_CPU_VAR(old_rsp)
x86: introduce save_rest and restructure the PTREGSCALL macro in entry_64.S Impact: cleanup The save_rest function completes a partial stack frame for use by the PTREGSCALL macro. This also avoids the indirect call in PTREGSCALLs. This adds the macro movq_cfi_restore to hide the CFI_RESTORE annotation when restoring a register from the stack frame. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:41:55 +00:00
movq EFLAGS+\offset(%rsp),\tmp
movq \tmp,R11+\offset(%rsp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.endm
.macro FAKE_STACK_FRAME child_rip
/* push in order ss, rsp, eflags, cs, rip */
[PATCH] x86_64: Small assembly improvements Save a byte here and there. Ultimatively useless, but these things always catch my eyes when reading the code so just fix them for now. Also I got at least one patch fixing of them already, which gives a good excuse. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 04:15:48 +00:00
xorl %eax, %eax
x86: use __KERNEL_DS as SS when returning to a kernel thread This is needed when the kernel is running on RING3, such as under Xen. x86_64 has a weird feature that makes it #GP on iret when SS is a null descriptor. This need to be tested on bare metal to make sure it doesn't cause any problems. AMD specs say SS is always ignored (except on iret?). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:25 +00:00
pushq $__KERNEL_DS /* ss */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/*CFI_REL_OFFSET ss,0*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pushq %rax /* rsp */
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REL_OFFSET rsp,0
x86: entry_64.S - use X86_EFLAGS_IF instead of hardcoded number Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 19:17:02 +00:00
pushq $X86_EFLAGS_IF /* eflags - interrupts on */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/*CFI_REL_OFFSET rflags,0*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pushq $__KERNEL_CS /* cs */
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/*CFI_REL_OFFSET cs,0*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pushq \child_rip /* rip */
CFI_ADJUST_CFA_OFFSET 8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REL_OFFSET rip,0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pushq %rax /* orig rax */
CFI_ADJUST_CFA_OFFSET 8
.endm
.macro UNFAKE_STACK_FRAME
addq $8*6, %rsp
CFI_ADJUST_CFA_OFFSET -(6*8)
.endm
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
/*
* initial frame state for interrupts (and exceptions without error code)
*/
.macro EMPTY_FRAME start=1 offset=0
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
.if \start
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
CFI_STARTPROC simple
[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder Current gcc generates calls not jumps to noreturn functions. When that happens the return address can point to the next function, which confuses the unwinder. This patch works around it by marking asynchronous exception frames in contrast normal call frames in the unwind information. Then teach the unwinder to decode this. For normal call frames the unwinder now subtracts one from the address which avoids this problem. The standard libgcc unwinder uses the same trick. It doesn't include adjustment of the printed address (i.e. for the original example, it'd still be kernel_math_error+0 that gets displayed, but the unwinder wouldn't get confused anymore. This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16 unfortunately because earlier binutils don't support .cfi_signal_frame [AK: added automatic detection of the new binutils and wrote description] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:41 +00:00
CFI_SIGNAL_FRAME
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
CFI_DEF_CFA rsp,8+\offset
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
.else
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
CFI_DEF_CFA_OFFSET 8+\offset
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
.endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.endm
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
/*
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
* initial frame state for interrupts (and exceptions without error code)
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
*/
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
.macro INTR_FRAME start=1 offset=0
x86: clean up after: move entry_64.S register saving out of the macros, fix Impact: build fix The break builds with older binutils (2.16.1): arch/x86/kernel/entry_64.S: Assembler messages: arch/x86/kernel/entry_64.S:282: Error: too many positional arguments arch/x86/kernel/entry_64.S:283: Error: too many positional arguments arch/x86/kernel/entry_64.S:284: Error: too many positional arguments arch/x86/kernel/entry_64.S:285: Error: too many positional arguments arch/x86/kernel/entry_64.S:286: Error: too many positional arguments arch/x86/kernel/entry_64.S:287: Error: too many positional arguments arch/x86/kernel/entry_64.S:288: Error: too many positional arguments arch/x86/kernel/entry_64.S:289: Error: too many positional arguments arch/x86/kernel/entry_64.S:290: Error: too many positional arguments Took some time to figure out the detail that GAS chokes on: it's negative offsets. Rearrange the calculations to make sure we never go negative. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:11:32 +00:00
EMPTY_FRAME \start, SS+8+\offset-RIP
/*CFI_REL_OFFSET ss, SS+\offset-RIP*/
CFI_REL_OFFSET rsp, RSP+\offset-RIP
/*CFI_REL_OFFSET rflags, EFLAGS+\offset-RIP*/
/*CFI_REL_OFFSET cs, CS+\offset-RIP*/
CFI_REL_OFFSET rip, RIP+\offset-RIP
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
.endm
/*
* initial frame state for exceptions with error code (and interrupts
* with vector already pushed)
*/
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
.macro XCPT_FRAME start=1 offset=0
x86: clean up after: move entry_64.S register saving out of the macros, fix Impact: build fix The break builds with older binutils (2.16.1): arch/x86/kernel/entry_64.S: Assembler messages: arch/x86/kernel/entry_64.S:282: Error: too many positional arguments arch/x86/kernel/entry_64.S:283: Error: too many positional arguments arch/x86/kernel/entry_64.S:284: Error: too many positional arguments arch/x86/kernel/entry_64.S:285: Error: too many positional arguments arch/x86/kernel/entry_64.S:286: Error: too many positional arguments arch/x86/kernel/entry_64.S:287: Error: too many positional arguments arch/x86/kernel/entry_64.S:288: Error: too many positional arguments arch/x86/kernel/entry_64.S:289: Error: too many positional arguments arch/x86/kernel/entry_64.S:290: Error: too many positional arguments Took some time to figure out the detail that GAS chokes on: it's negative offsets. Rearrange the calculations to make sure we never go negative. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:11:32 +00:00
INTR_FRAME \start, RIP+\offset-ORIG_RAX
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
/*CFI_REL_OFFSET orig_rax, ORIG_RAX-ORIG_RAX*/
.endm
/*
* frame that enables calling into C.
*/
.macro PARTIAL_FRAME start=1 offset=0
x86: clean up after: move entry_64.S register saving out of the macros, fix Impact: build fix The break builds with older binutils (2.16.1): arch/x86/kernel/entry_64.S: Assembler messages: arch/x86/kernel/entry_64.S:282: Error: too many positional arguments arch/x86/kernel/entry_64.S:283: Error: too many positional arguments arch/x86/kernel/entry_64.S:284: Error: too many positional arguments arch/x86/kernel/entry_64.S:285: Error: too many positional arguments arch/x86/kernel/entry_64.S:286: Error: too many positional arguments arch/x86/kernel/entry_64.S:287: Error: too many positional arguments arch/x86/kernel/entry_64.S:288: Error: too many positional arguments arch/x86/kernel/entry_64.S:289: Error: too many positional arguments arch/x86/kernel/entry_64.S:290: Error: too many positional arguments Took some time to figure out the detail that GAS chokes on: it's negative offsets. Rearrange the calculations to make sure we never go negative. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:11:32 +00:00
XCPT_FRAME \start, ORIG_RAX+\offset-ARGOFFSET
CFI_REL_OFFSET rdi, RDI+\offset-ARGOFFSET
CFI_REL_OFFSET rsi, RSI+\offset-ARGOFFSET
CFI_REL_OFFSET rdx, RDX+\offset-ARGOFFSET
CFI_REL_OFFSET rcx, RCX+\offset-ARGOFFSET
CFI_REL_OFFSET rax, RAX+\offset-ARGOFFSET
CFI_REL_OFFSET r8, R8+\offset-ARGOFFSET
CFI_REL_OFFSET r9, R9+\offset-ARGOFFSET
CFI_REL_OFFSET r10, R10+\offset-ARGOFFSET
CFI_REL_OFFSET r11, R11+\offset-ARGOFFSET
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
.endm
/*
* frame that enables passing a complete pt_regs to a C function.
*/
.macro DEFAULT_FRAME start=1 offset=0
x86: clean up after: move entry_64.S register saving out of the macros, fix Impact: build fix The break builds with older binutils (2.16.1): arch/x86/kernel/entry_64.S: Assembler messages: arch/x86/kernel/entry_64.S:282: Error: too many positional arguments arch/x86/kernel/entry_64.S:283: Error: too many positional arguments arch/x86/kernel/entry_64.S:284: Error: too many positional arguments arch/x86/kernel/entry_64.S:285: Error: too many positional arguments arch/x86/kernel/entry_64.S:286: Error: too many positional arguments arch/x86/kernel/entry_64.S:287: Error: too many positional arguments arch/x86/kernel/entry_64.S:288: Error: too many positional arguments arch/x86/kernel/entry_64.S:289: Error: too many positional arguments arch/x86/kernel/entry_64.S:290: Error: too many positional arguments Took some time to figure out the detail that GAS chokes on: it's negative offsets. Rearrange the calculations to make sure we never go negative. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:11:32 +00:00
PARTIAL_FRAME \start, R11+\offset-R15
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
CFI_REL_OFFSET rbx, RBX+\offset
CFI_REL_OFFSET rbp, RBP+\offset
CFI_REL_OFFSET r12, R12+\offset
CFI_REL_OFFSET r13, R13+\offset
CFI_REL_OFFSET r14, R14+\offset
CFI_REL_OFFSET r15, R15+\offset
.endm
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
/* save partial stack frame */
ENTRY(save_args)
XCPT_FRAME
cld
x86: entry_64.S: rename Impact: cleanup Rename: CFI_PUSHQ => pushq_cfi CFI_POPQ => popq_cfi CFI_MOVQ => movq_cfi To make it blend better into regular assembly code. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:20:47 +00:00
movq_cfi rdi, RDI+16-ARGOFFSET
movq_cfi rsi, RSI+16-ARGOFFSET
movq_cfi rdx, RDX+16-ARGOFFSET
movq_cfi rcx, RCX+16-ARGOFFSET
movq_cfi rax, RAX+16-ARGOFFSET
movq_cfi r8, R8+16-ARGOFFSET
movq_cfi r9, R9+16-ARGOFFSET
movq_cfi r10, R10+16-ARGOFFSET
movq_cfi r11, R11+16-ARGOFFSET
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
leaq -ARGOFFSET+16(%rsp),%rdi /* arg1 for handler */
x86: entry_64.S: rename Impact: cleanup Rename: CFI_PUSHQ => pushq_cfi CFI_POPQ => popq_cfi CFI_MOVQ => movq_cfi To make it blend better into regular assembly code. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:20:47 +00:00
movq_cfi rbp, 8 /* push %rbp */
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
leaq 8(%rsp), %rbp /* mov %rsp, %ebp */
testl $3, CS(%rdi)
je 1f
SWAPGS
/*
x86-64: Move irqcount from PDA to per-cpu. tj: s/irqcount/irq_count/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
* irq_count is used to check if a CPU is already on an interrupt stack
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
* or not. While this is essentially redundant with preempt_count it is
* a little cheaper to use a separate counter in the PDA (short of
* moving irq_enter into assembly, which would be too much work)
*/
x86-64: Move irqcount from PDA to per-cpu. tj: s/irqcount/irq_count/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
1: incl PER_CPU_VAR(irq_count)
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
jne 2f
x86: entry_64.S: rename Impact: cleanup Rename: CFI_PUSHQ => pushq_cfi CFI_POPQ => popq_cfi CFI_MOVQ => movq_cfi To make it blend better into regular assembly code. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:20:47 +00:00
popq_cfi %rax /* move return address... */
x86-64: Convert irqstacks to per-cpu Move the irqstackptr variable from the PDA to per-cpu. Make the stacks themselves per-cpu, removing some specific allocation code. Add a seperate flag (is_boot_cpu) to simplify the per-cpu boot adjustments. tj: * sprinkle some underbars around. * irq_stack_ptr is not used till traps_init(), no reason to initialize it early. On SMP, just leaving it NULL till proper initialization in setup_per_cpu_areas() works. Dropped is_boot_cpu and early irq_stack_ptr initialization. * do DECLARE/DEFINE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack) instead of (char, irq_stack[IRQ_STACK_SIZE]). Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
mov PER_CPU_VAR(irq_stack_ptr),%rsp
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
EMPTY_FRAME 0
x86: push old stack address on irqstack for unwinder Impact: Fixes dumpstack and KDB on 64 bits This re-adds the old stack pointer to the top of the irqstack to help with unwinding. It was removed in commit d99015b1abbad743aa049b439c1e1dede6d0fa49 as part of the save_args out-of-line work. Both dumpstack and KDB require this information. Signed-off-by: Martin Hicks <mort@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-30 16:50:54 +00:00
pushq_cfi %rbp /* backlink for unwinder */
x86: entry_64.S: rename Impact: cleanup Rename: CFI_PUSHQ => pushq_cfi CFI_POPQ => popq_cfi CFI_MOVQ => movq_cfi To make it blend better into regular assembly code. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:20:47 +00:00
pushq_cfi %rax /* ... to the new stack */
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
/*
* We entered an interrupt context - irqs are off:
*/
2: TRACE_IRQS_OFF
ret
CFI_ENDPROC
END(save_args)
x86: introduce save_rest and restructure the PTREGSCALL macro in entry_64.S Impact: cleanup The save_rest function completes a partial stack frame for use by the PTREGSCALL macro. This also avoids the indirect call in PTREGSCALLs. This adds the macro movq_cfi_restore to hide the CFI_RESTORE annotation when restoring a register from the stack frame. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:41:55 +00:00
ENTRY(save_rest)
PARTIAL_FRAME 1 REST_SKIP+8
movq 5*8+16(%rsp), %r11 /* save return address */
movq_cfi rbx, RBX+16
movq_cfi rbp, RBP+16
movq_cfi r12, R12+16
movq_cfi r13, R13+16
movq_cfi r14, R14+16
movq_cfi r15, R15+16
movq %r11, 8(%rsp) /* return address */
FIXUP_TOP_OF_STACK %r11, 16
ret
CFI_ENDPROC
END(save_rest)
x86: entry_64.S: factor out save_paranoid and paranoid_exit Impact: cleanup, shrink kernel image size Also expand the paranoid_exit0 macro into nmi_exit inside the nmi stub in the case of enabled irq-tracing. This gives a few hundred bytes code size reduction. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:43:18 +00:00
/* save complete stack frame */
x86-64: move save_paranoid into .kprobes.text Impact: mark save_paranoid as non-kprobe-able code This appears to be necessary as the function gets called from kprobes-unsafe exception handling stubs (i.e. which themselves live in .kprobes.text). Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <49B8F44F.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 10:38:55 +00:00
.pushsection .kprobes.text, "ax"
x86: entry_64.S: factor out save_paranoid and paranoid_exit Impact: cleanup, shrink kernel image size Also expand the paranoid_exit0 macro into nmi_exit inside the nmi stub in the case of enabled irq-tracing. This gives a few hundred bytes code size reduction. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:43:18 +00:00
ENTRY(save_paranoid)
XCPT_FRAME 1 RDI+8
cld
movq_cfi rdi, RDI+8
movq_cfi rsi, RSI+8
movq_cfi rdx, RDX+8
movq_cfi rcx, RCX+8
movq_cfi rax, RAX+8
movq_cfi r8, R8+8
movq_cfi r9, R9+8
movq_cfi r10, R10+8
movq_cfi r11, R11+8
movq_cfi rbx, RBX+8
movq_cfi rbp, RBP+8
movq_cfi r12, R12+8
movq_cfi r13, R13+8
movq_cfi r14, R14+8
movq_cfi r15, R15+8
movl $1,%ebx
movl $MSR_GS_BASE,%ecx
rdmsr
testl %edx,%edx
js 1f /* negative -> in kernel */
SWAPGS
xorl %ebx,%ebx
1: ret
CFI_ENDPROC
END(save_paranoid)
x86-64: move save_paranoid into .kprobes.text Impact: mark save_paranoid as non-kprobe-able code This appears to be necessary as the function gets called from kprobes-unsafe exception handling stubs (i.e. which themselves live in .kprobes.text). Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <49B8F44F.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 10:38:55 +00:00
.popsection
x86: entry_64.S: factor out save_paranoid and paranoid_exit Impact: cleanup, shrink kernel image size Also expand the paranoid_exit0 macro into nmi_exit inside the nmi stub in the case of enabled irq-tracing. This gives a few hundred bytes code size reduction. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:43:18 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
x86: ret_from_fork - get rid of jump back Impact: remove dead code If we take a closer look at the rff_trace/rff_action ret_from_fork code, we have to realize that it does all the wrong things: for example it checks the TIF flag - while later on jumping back to the ret-from-syscall path - duplicating the check needlessly. But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because we clear that flag for every freshly forked task. So the whole "tracing" code here, for which there is a out of line jump optimization that makes it even harder to read, is in reality completely dead code ... Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
2008-11-27 13:41:21 +00:00
* A newly forked process directly context switches into this address.
*
* rdi: prev task we switched from
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ENTRY(ret_from_fork)
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
DEFAULT_FRAME
x86: ret_from_fork - get rid of jump back Impact: remove dead code If we take a closer look at the rff_trace/rff_action ret_from_fork code, we have to realize that it does all the wrong things: for example it checks the TIF flag - while later on jumping back to the ret-from-syscall path - duplicating the check needlessly. But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because we clear that flag for every freshly forked task. So the whole "tracing" code here, for which there is a out of line jump optimization that makes it even harder to read, is in reality completely dead code ... Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
2008-11-27 13:41:21 +00:00
x86-64: remove locked instruction from switch_to() Impact: micro-optimization The patch below removes an unnecessary locked instruction from switch_to(). TIF_FORK is only ever set in copy_thread() on initial process creation, and gets cleared during the first scheduling of the process. As such, it is safe to use an unlocked test for the flag within switch_to(). Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11 04:00:22 +00:00
LOCK ; btr $TIF_FORK,TI_flags(%r8)
[PATCH] Don't leak NT bit into next task SYSENTER can cause a NT to be set which might cause crashes on the IRET in the next task. Following similar i386 patch from Linus. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:41 +00:00
push kernel_eflags(%rip)
x86, 64-bit, dwarf2: push pushes 8 bytes and popf pops 8 The CFI_ADJUST_CFA_OFFSET dwarf2 annotation of a push/popf pair in ret_from_fork wrongly used a value of 4. It should have been 8. Fix that. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Cc: Andi Kleen <andi@firstfloor.org> Cc: heukelum@fastmail.fm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-22 16:14:16 +00:00
CFI_ADJUST_CFA_OFFSET 8
x86: ret_from_fork - get rid of jump back Impact: remove dead code If we take a closer look at the rff_trace/rff_action ret_from_fork code, we have to realize that it does all the wrong things: for example it checks the TIF flag - while later on jumping back to the ret-from-syscall path - duplicating the check needlessly. But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because we clear that flag for every freshly forked task. So the whole "tracing" code here, for which there is a out of line jump optimization that makes it even harder to read, is in reality completely dead code ... Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
2008-11-27 13:41:21 +00:00
popf # reset kernel eflags
x86, 64-bit, dwarf2: push pushes 8 bytes and popf pops 8 The CFI_ADJUST_CFA_OFFSET dwarf2 annotation of a push/popf pair in ret_from_fork wrongly used a value of 4. It should have been 8. Fix that. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Cc: Andi Kleen <andi@firstfloor.org> Cc: heukelum@fastmail.fm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-22 16:14:16 +00:00
CFI_ADJUST_CFA_OFFSET -8
x86: ret_from_fork - get rid of jump back Impact: remove dead code If we take a closer look at the rff_trace/rff_action ret_from_fork code, we have to realize that it does all the wrong things: for example it checks the TIF flag - while later on jumping back to the ret-from-syscall path - duplicating the check needlessly. But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because we clear that flag for every freshly forked task. So the whole "tracing" code here, for which there is a out of line jump optimization that makes it even harder to read, is in reality completely dead code ... Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
2008-11-27 13:41:21 +00:00
call schedule_tail # rdi: 'prev' task parameter
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
GET_THREAD_INFO(%rcx)
x86: ret_from_fork - get rid of jump back Impact: remove dead code If we take a closer look at the rff_trace/rff_action ret_from_fork code, we have to realize that it does all the wrong things: for example it checks the TIF flag - while later on jumping back to the ret-from-syscall path - duplicating the check needlessly. But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because we clear that flag for every freshly forked task. So the whole "tracing" code here, for which there is a out of line jump optimization that makes it even harder to read, is in reality completely dead code ... Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
2008-11-27 13:41:21 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
RESTORE_REST
x86: ret_from_fork - get rid of jump back Impact: remove dead code If we take a closer look at the rff_trace/rff_action ret_from_fork code, we have to realize that it does all the wrong things: for example it checks the TIF flag - while later on jumping back to the ret-from-syscall path - duplicating the check needlessly. But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because we clear that flag for every freshly forked task. So the whole "tracing" code here, for which there is a out of line jump optimization that makes it even harder to read, is in reality completely dead code ... Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
2008-11-27 13:41:21 +00:00
testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread?
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
je int_ret_from_sys_call
x86: ret_from_fork - get rid of jump back Impact: remove dead code If we take a closer look at the rff_trace/rff_action ret_from_fork code, we have to realize that it does all the wrong things: for example it checks the TIF flag - while later on jumping back to the ret-from-syscall path - duplicating the check needlessly. But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because we clear that flag for every freshly forked task. So the whole "tracing" code here, for which there is a out of line jump optimization that makes it even harder to read, is in reality completely dead code ... Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
2008-11-27 13:41:21 +00:00
testl $_TIF_IA32, TI_flags(%rcx) # 32-bit compat task needs IRET
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jnz int_ret_from_sys_call
x86: ret_from_fork - get rid of jump back Impact: remove dead code If we take a closer look at the rff_trace/rff_action ret_from_fork code, we have to realize that it does all the wrong things: for example it checks the TIF flag - while later on jumping back to the ret-from-syscall path - duplicating the check needlessly. But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because we clear that flag for every freshly forked task. So the whole "tracing" code here, for which there is a out of line jump optimization that makes it even harder to read, is in reality completely dead code ... Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
2008-11-27 13:41:21 +00:00
x86: introduce save_rest and restructure the PTREGSCALL macro in entry_64.S Impact: cleanup The save_rest function completes a partial stack frame for use by the PTREGSCALL macro. This also avoids the indirect call in PTREGSCALLs. This adds the macro movq_cfi_restore to hide the CFI_RESTORE annotation when restoring a register from the stack frame. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:41:55 +00:00
RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
x86: ret_from_fork - get rid of jump back Impact: remove dead code If we take a closer look at the rff_trace/rff_action ret_from_fork code, we have to realize that it does all the wrong things: for example it checks the TIF flag - while later on jumping back to the ret-from-syscall path - duplicating the check needlessly. But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because we clear that flag for every freshly forked task. So the whole "tracing" code here, for which there is a out of line jump optimization that makes it even harder to read, is in reality completely dead code ... Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
2008-11-27 13:41:21 +00:00
jmp ret_from_sys_call # go to the SYSRET fastpath
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
END(ret_from_fork)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* System call entry. Upto 6 arguments in registers are supported.
*
* SYSCALL does not save anything on the stack and does not change the
* stack pointer.
*/
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
* Register setup:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* rax system call number
* rdi arg0
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
* rcx return address for syscall/sysret, C arg3
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* rsi arg1
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
* rdx arg2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* r10 arg3 (--> moved to rcx for C)
* r8 arg4
* r9 arg5
* r11 eflags for syscall/sysret, temporary for C
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
* r12-r15,rbp,rbx saved by C code, not touched.
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Interrupts are off on entry.
* Only called from user space.
*
* XXX if we had a free scratch register we could save the RSP into the stack frame
* and report it properly in ps. Unfortunately we haven't.
[PATCH] x86_64: When user could have changed RIP always force IRET Intel EM64T CPUs handle uncanonical return addresses differently from AMD CPUs. The exception is reported in the SYSRET, not the next instruction. This leads to the kernel exception handler running on the user stack with the wrong GS because the kernel didn't expect exceptions on this instruction. This version of the patch has the teething problems that plagued an earlier version fixed. This is CVE-2006-0744 Thanks to Ernie Petrides and Asit B. Mallick for analysis and initial patches. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-07 17:50:00 +00:00
*
* When user can change the frames always force IRET. That is because
* it deals with uncanonical addresses better. SYSRET has trouble
* with them due to bugs in both AMD and Intel CPUs.
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ENTRY(system_call)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_STARTPROC simple
[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder Current gcc generates calls not jumps to noreturn functions. When that happens the return address can point to the next function, which confuses the unwinder. This patch works around it by marking asynchronous exception frames in contrast normal call frames in the unwind information. Then teach the unwinder to decode this. For normal call frames the unwinder now subtracts one from the address which avoids this problem. The standard libgcc unwinder uses the same trick. It doesn't include adjustment of the printed address (i.e. for the original example, it'd still be kernel_math_error+0 that gets displayed, but the unwinder wouldn't get confused anymore. This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16 unfortunately because earlier binutils don't support .cfi_signal_frame [AK: added automatic detection of the new binutils and wrote description] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:41 +00:00
CFI_SIGNAL_FRAME
x86-64: Move kernelstack from PDA to per-cpu. Also clean up PER_CPU_VAR usage in xen-asm_64.S tj: * remove now unused stack_thread_info() * s/kernelstack/kernel_stack/ * added FIXME comment in xen-asm_64.S Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
SWAPGS_UNSAFE_STACK
/*
* A hypervisor implementation might want to use a label
* after the swapgs, so that it can do the swapgs
* for the guest and jump here on syscall.
*/
ENTRY(system_call_after_swapgs)
x86-64: Move oldrsp from PDA to per-cpu. tj: * in asm-offsets_64.c, pda.h inclusion shouldn't be removed as pda is still referenced in the file * s/oldrsp/old_rsp/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
movq %rsp,PER_CPU_VAR(old_rsp)
x86-64: Move kernelstack from PDA to per-cpu. Also clean up PER_CPU_VAR usage in xen-asm_64.S tj: * remove now unused stack_thread_info() * s/kernelstack/kernel_stack/ * added FIXME comment in xen-asm_64.S Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
movq PER_CPU_VAR(kernel_stack),%rsp
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
/*
* No need to follow this irqs off/on section - it's straight
* and short:
*/
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
SAVE_ARGS 8,1
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
movq %rcx,RIP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rip,RIP-ARGOFFSET
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
GET_THREAD_INFO(%rcx)
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 09:38:07 +00:00
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jnz tracesys
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 22:37:04 +00:00
system_call_fastpath:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
cmpq $__NR_syscall_max,%rax
ja badsys
movq %r10,%rcx
call *sys_call_table(,%rax,8) # XXX: rip relative
movq %rax,RAX-ARGOFFSET(%rsp)
/*
* Syscall return path ending with SYSRET (fast path)
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
* Has incomplete stack frame and undefined top of stack.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ret_from_sys_call:
[PATCH] x86_64: Call do_notify_resume unconditionally in entry.S This removes some unnecessary code in the assembly files. Matches i386 behaviour. In addition don't clear the work check mask after work has been done. This fixes some theoretical signal/other event losses. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 22:25:02 +00:00
movl $_TIF_ALLWORK_MASK,%edi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* edi: flagmask */
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
sysret_check:
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 20:11:12 +00:00
LOCKDEP_SYS_EXIT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
GET_THREAD_INFO(%rcx)
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_OFF
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 14:19:35 +00:00
movl TI_flags(%rcx),%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
andl %edi,%edx
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
jnz sysret_careful
[PATCH] x86-64: miscellaneous entry.S adjustments This patch: - makes ret_from_sys_call no longer global (all external users were previously switched to use int_ret_from_sys_call) - adjusts placement of a CFI_{REMEMBER,RESTORE}_STATE pair to better fit logic flow - eliminates an unnecessary pair of CFI_{REMEMBER,RESTORE}_STATE - glues together function- and unwinder-wise the previously separate system_call and int_ret_from_sys_call function fragments Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07 01:14:02 +00:00
CFI_REMEMBER_STATE
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
/*
* sysretq will re-enable interrupts:
*/
TRACE_IRQS_ON
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movq RIP-ARGOFFSET(%rsp),%rcx
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REGISTER rip,rcx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
RESTORE_ARGS 0,-ARG_SKIP,1
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/*CFI_REGISTER rflags,r11*/
x86-64: Move oldrsp from PDA to per-cpu. tj: * in asm-offsets_64.c, pda.h inclusion shouldn't be removed as pda is still referenced in the file * s/oldrsp/old_rsp/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
movq PER_CPU_VAR(old_rsp), %rsp
x86/paravirt: add sysret/sysexit pvops for returning to 32-bit compatibility userspace In a 64-bit system, we need separate sysret/sysexit operations to return to a 32-bit userspace. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:28 +00:00
USERGS_SYSRET64
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] x86-64: miscellaneous entry.S adjustments This patch: - makes ret_from_sys_call no longer global (all external users were previously switched to use int_ret_from_sys_call) - adjusts placement of a CFI_{REMEMBER,RESTORE}_STATE pair to better fit logic flow - eliminates an unnecessary pair of CFI_{REMEMBER,RESTORE}_STATE - glues together function- and unwinder-wise the previously separate system_call and int_ret_from_sys_call function fragments Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07 01:14:02 +00:00
CFI_RESTORE_STATE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Handle reschedules */
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
/* edx: work, edi: workmask */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sysret_careful:
bt $TIF_NEED_RESCHED,%edx
jnc sysret_signal
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pushq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call schedule
popq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET -8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jmp sysret_check
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
/* Handle a signal */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sysret_signal:
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
ENABLE_INTERRUPTS(CLBR_NONE)
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 22:37:04 +00:00
#ifdef CONFIG_AUDITSYSCALL
bt $TIF_SYSCALL_AUDIT,%edx
jc sysret_audit
#endif
x86: ptrace: sysret path should reach syscall_trace_leave If TIF_SYSCALL_TRACE or TIF_SINGLESTEP is set while inside a syscall, the path back to user mode should get to syscall_trace_leave. This does happen in most circumstances. The exception to this is on the 64-bit syscall fastpath, when no such flag was set on syscall entry and nothing else has punted it off the fastpath for exit. That one exit fastpath fails to check for _TIF_WORK_SYSCALL_EXIT flags. This makes the behavior inconsistent with what 32-bit tasks see and what the native 32-bit kernel always does, and what 64-bit tasks see in all cases where the iret path is taken anyhow. Perhaps the only example that is affected is a ptrace stop inside do_fork (for PTRACE_O_TRACE{CLONE,FORK,VFORK,VFORKDONE}). Other syscalls with internal ptrace stop points (execve) already take the iret exit path for unrelated reasons. Test cases for both PTRACE_SYSCALL and PTRACE_SINGLESTEP variants are at: http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/syscall-from-clone.c?cvsroot=systemtap http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/step-from-clone.c?cvsroot=systemtap There was no special benefit to the sysret path's special path to call do_notify_resume, because it always takes the iret exit path at the end. So this change just makes the sysret exit path join the iret exit path for all the signals and ptrace cases. The fastpath still applies to the plain syscall-audit and resched cases. Signed-off-by: Roland McGrath <roland@redhat.com> CC: Oleg Nesterov <oleg@redhat.com>
2009-09-22 23:46:34 +00:00
/*
* We have a signal, or exit tracing or single-step.
* These all wind up with the iret return path anyway,
* so just join that path right now.
*/
FIXUP_TOP_OF_STACK %r11, -ARGOFFSET
jmp int_check_syscall_exit_work
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
badsys:
movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
jmp ret_from_sys_call
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 22:37:04 +00:00
#ifdef CONFIG_AUDITSYSCALL
/*
* Fast path for syscall audit without full syscall trace.
* We just call audit_syscall_entry() directly, and then
* jump back to the normal fast path.
*/
auditsys:
movq %r10,%r9 /* 6th arg: 4th syscall arg */
movq %rdx,%r8 /* 5th arg: 3rd syscall arg */
movq %rsi,%rcx /* 4th arg: 2nd syscall arg */
movq %rdi,%rdx /* 3rd arg: 1st syscall arg */
movq %rax,%rsi /* 2nd arg: syscall number */
movl $AUDIT_ARCH_X86_64,%edi /* 1st arg: audit arch */
call audit_syscall_entry
LOAD_ARGS 0 /* reload call-clobbered registers */
jmp system_call_fastpath
/*
* Return fast path for syscall audit. Call audit_syscall_exit()
* directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
* masked off.
*/
sysret_audit:
x86: auditsyscall: fix fastpath return value after reschedule In the CONFIG_AUDITSYSCALL fast-path for x86 64-bit system calls, we can pass a bad return value and/or error indication for the system call to audit_syscall_exit(). This happens when TIF_NEED_RESCHED was set as the system call returned, so we went out to schedule() and came back to the exit-audit fast-path. The fix is to reload the user return value register from the pt_regs before using it for audit_syscall_exit(). Both the 32-bit kernel's fast path and the 64-bit kernel's 32-bit system call fast paths work slightly differently, so that they always leave the fast path entirely to reschedule and don't return there, so they don't have the analogous bugs. Reported-by: Alexander Viro <aviro@redhat.com> Signed-off-by: Roland McGrath <roland@redhat.com>
2010-07-22 00:44:12 +00:00
movq RAX-ARGOFFSET(%rsp),%rsi /* second arg, syscall return value */
cmpq $0,%rsi /* is it < 0? */
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 22:37:04 +00:00
setl %al /* 1 if so, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
call audit_syscall_exit
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
jmp sysret_check
#endif /* CONFIG_AUDITSYSCALL */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Do syscall tracing */
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
tracesys:
x86_64 syscall audit fast-path This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-06-23 22:37:04 +00:00
#ifdef CONFIG_AUDITSYSCALL
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
jz auditsys
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
SAVE_REST
x86: ptrace vs -ENOSYS When we're stopped at syscall entry tracing, ptrace can change the %rax value from -ENOSYS to something else. If no system call is actually made because the syscall number (now in orig_rax) is bad, then we now always reset %rax to -ENOSYS again. This changes it to leave the return value alone after entry tracing. That way, the %rax value set by ptrace is there to be seen in user mode (or in syscall exit tracing). This is consistent with what the 32-bit kernel does. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-17 04:59:11 +00:00
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
FIXUP_TOP_OF_STACK %rdi
movq %rsp,%rdi
call syscall_trace_enter
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 09:38:07 +00:00
/*
* Reload arg registers from stack in case ptrace changed them.
* We don't reload %rax because syscall_trace_enter() returned
* the value it wants us to use in the table lookup.
*/
LOAD_ARGS ARGOFFSET, 1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
RESTORE_REST
cmpq $__NR_syscall_max,%rax
x86: ptrace vs -ENOSYS When we're stopped at syscall entry tracing, ptrace can change the %rax value from -ENOSYS to something else. If no system call is actually made because the syscall number (now in orig_rax) is bad, then we now always reset %rax to -ENOSYS again. This changes it to leave the return value alone after entry tracing. That way, the %rax value set by ptrace is there to be seen in user mode (or in syscall exit tracing). This is consistent with what the 32-bit kernel does. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-17 04:59:11 +00:00
ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movq %r10,%rcx /* fixup for C */
call *sys_call_table(,%rax,8)
x86: ptrace vs -ENOSYS When we're stopped at syscall entry tracing, ptrace can change the %rax value from -ENOSYS to something else. If no system call is actually made because the syscall number (now in orig_rax) is bad, then we now always reset %rax to -ENOSYS again. This changes it to leave the return value alone after entry tracing. That way, the %rax value set by ptrace is there to be seen in user mode (or in syscall exit tracing). This is consistent with what the 32-bit kernel does. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-17 04:59:11 +00:00
movq %rax,RAX-ARGOFFSET(%rsp)
[PATCH] x86_64: When user could have changed RIP always force IRET Intel EM64T CPUs handle uncanonical return addresses differently from AMD CPUs. The exception is reported in the SYSRET, not the next instruction. This leads to the kernel exception handler running on the user stack with the wrong GS because the kernel didn't expect exceptions on this instruction. This version of the patch has the teething problems that plagued an earlier version fixed. This is CVE-2006-0744 Thanks to Ernie Petrides and Asit B. Mallick for analysis and initial patches. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-07 17:50:00 +00:00
/* Use IRET because user could have changed frame */
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Syscall return path ending with IRET.
* Has correct top of stack, but partial stack frame.
[PATCH] x86-64: miscellaneous entry.S adjustments This patch: - makes ret_from_sys_call no longer global (all external users were previously switched to use int_ret_from_sys_call) - adjusts placement of a CFI_{REMEMBER,RESTORE}_STATE pair to better fit logic flow - eliminates an unnecessary pair of CFI_{REMEMBER,RESTORE}_STATE - glues together function- and unwinder-wise the previously separate system_call and int_ret_from_sys_call function fragments Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07 01:14:02 +00:00
*/
x86: head_64.S - use GLOBAL macro Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: heukelum@fastmail.fm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 19:57:01 +00:00
GLOBAL(int_ret_from_sys_call)
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
testl $3,CS-ARGOFFSET(%rsp)
je retint_restore_args
movl $_TIF_ALLWORK_MASK,%edi
/* edi: mask to check */
x86: head_64.S - use GLOBAL macro Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: heukelum@fastmail.fm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-23 19:57:01 +00:00
GLOBAL(int_with_check)
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 20:11:12 +00:00
LOCKDEP_SYS_EXIT_IRQ
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
GET_THREAD_INFO(%rcx)
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 14:19:35 +00:00
movl TI_flags(%rcx),%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
andl %edi,%edx
jnz int_careful
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 14:19:35 +00:00
andl $~TS_COMPAT,TI_status(%rcx)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jmp retint_swapgs
/* Either reschedule or signal or syscall exit tracking needed. */
/* First do a reschedule test. */
/* edx: work, edi: workmask */
int_careful:
bt $TIF_NEED_RESCHED,%edx
jnc int_very_careful
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pushq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call schedule
popq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET -8
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jmp int_with_check
/* handle signals and tracing -- both require a full stack frame */
int_very_careful:
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
ENABLE_INTERRUPTS(CLBR_NONE)
x86: ptrace: sysret path should reach syscall_trace_leave If TIF_SYSCALL_TRACE or TIF_SINGLESTEP is set while inside a syscall, the path back to user mode should get to syscall_trace_leave. This does happen in most circumstances. The exception to this is on the 64-bit syscall fastpath, when no such flag was set on syscall entry and nothing else has punted it off the fastpath for exit. That one exit fastpath fails to check for _TIF_WORK_SYSCALL_EXIT flags. This makes the behavior inconsistent with what 32-bit tasks see and what the native 32-bit kernel always does, and what 64-bit tasks see in all cases where the iret path is taken anyhow. Perhaps the only example that is affected is a ptrace stop inside do_fork (for PTRACE_O_TRACE{CLONE,FORK,VFORK,VFORKDONE}). Other syscalls with internal ptrace stop points (execve) already take the iret exit path for unrelated reasons. Test cases for both PTRACE_SYSCALL and PTRACE_SINGLESTEP variants are at: http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/syscall-from-clone.c?cvsroot=systemtap http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/step-from-clone.c?cvsroot=systemtap There was no special benefit to the sysret path's special path to call do_notify_resume, because it always takes the iret exit path at the end. So this change just makes the sysret exit path join the iret exit path for all the signals and ptrace cases. The fastpath still applies to the plain syscall-audit and resched cases. Signed-off-by: Roland McGrath <roland@redhat.com> CC: Oleg Nesterov <oleg@redhat.com>
2009-09-22 23:46:34 +00:00
int_check_syscall_exit_work:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
SAVE_REST
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
/* Check for syscall exit trace */
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 09:38:07 +00:00
testl $_TIF_WORK_SYSCALL_EXIT,%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jz int_signal
pushq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET 8
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
leaq 8(%rsp),%rdi # &ptregs -> arg1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call syscall_trace_leave
popq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET -8
x86 ptrace: unify syscall tracing This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-09 09:38:07 +00:00
andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jmp int_restore_rest
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int_signal:
sched: high-res preemption tick Use HR-timers (when available) to deliver an accurate preemption tick. The regular scheduler tick that runs at 1/HZ can be too coarse when nice level are used. The fairness system will still keep the cpu utilisation 'fair' by then delaying the task that got an excessive amount of CPU time but try to minimize this by delivering preemption points spot-on. The average frequency of this extra interrupt is sched_latency / nr_latency. Which need not be higher than 1/HZ, its just that the distribution within the sched_latency period is important. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:29 +00:00
testl $_TIF_DO_NOTIFY_MASK,%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jz 1f
movq %rsp,%rdi # &ptregs -> arg1
xorl %esi,%esi # oldset -> arg2
call do_notify_resume
x86_64: fix delayed signals On three of the several paths in entry_64.S that call do_notify_resume() on the way back to user mode, we fail to properly check again for newly-arrived work that requires another call to do_notify_resume() before going to user mode. These paths set the mask to check only _TIF_NEED_RESCHED, but this is wrong. The other paths that lead to do_notify_resume() do this correctly already, and entry_32.S does it correctly in all cases. All paths back to user mode have to check all the _TIF_WORK_MASK flags at the last possible stage, with interrupts disabled. Otherwise, we miss any flags (TIF_SIGPENDING for example) that were set any time after we entered do_notify_resume(). More work flags can be set (or left set) synchronously inside do_notify_resume(), as TIF_SIGPENDING can be, or asynchronously by interrupts or other CPUs (which then send an asynchronous interrupt). There are many different scenarios that could hit this bug, most of them races. The simplest one to demonstrate does not require any race: when one signal has done handler setup at the check before returning from a syscall, and there is another signal pending that should be handled. The second signal's handler should interrupt the first signal handler before it actually starts (so the interrupted PC is still at the handler's entry point). Instead, it runs away until the next kernel entry (next syscall, tick, etc). This test behaves correctly on 32-bit kernels, and fails on 64-bit (either 32-bit or 64-bit test binary). With this fix, it works. #define _GNU_SOURCE #include <stdio.h> #include <signal.h> #include <string.h> #include <sys/ucontext.h> #ifndef REG_RIP #define REG_RIP REG_EIP #endif static sig_atomic_t hit1, hit2; static void handler (int sig, siginfo_t *info, void *ctx) { ucontext_t *uc = ctx; if ((void *) uc->uc_mcontext.gregs[REG_RIP] == &handler) { if (sig == SIGUSR1) hit1 = 1; else hit2 = 1; } printf ("%s at %#lx\n", strsignal (sig), uc->uc_mcontext.gregs[REG_RIP]); } int main (void) { struct sigaction sa; sigset_t set; sigemptyset (&sa.sa_mask); sa.sa_flags = SA_SIGINFO; sa.sa_sigaction = &handler; if (sigaction (SIGUSR1, &sa, NULL) || sigaction (SIGUSR2, &sa, NULL)) return 2; sigemptyset (&set); sigaddset (&set, SIGUSR1); sigaddset (&set, SIGUSR2); if (sigprocmask (SIG_BLOCK, &set, NULL)) return 3; printf ("main at %p, handler at %p\n", &main, &handler); raise (SIGUSR1); raise (SIGUSR2); if (sigprocmask (SIG_UNBLOCK, &set, NULL)) return 4; if (hit1 + hit2 == 1) { puts ("PASS"); return 0; } puts ("FAIL"); return 1; } Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10 21:50:39 +00:00
1: movl $_TIF_WORK_MASK,%edi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int_restore_rest:
RESTORE_REST
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jmp int_with_check
CFI_ENDPROC
[PATCH] x86-64: miscellaneous entry.S adjustments This patch: - makes ret_from_sys_call no longer global (all external users were previously switched to use int_ret_from_sys_call) - adjusts placement of a CFI_{REMEMBER,RESTORE}_STATE pair to better fit logic flow - eliminates an unnecessary pair of CFI_{REMEMBER,RESTORE}_STATE - glues together function- and unwinder-wise the previously separate system_call and int_ret_from_sys_call function fragments Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-12-07 01:14:02 +00:00
END(system_call)
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Certain special system calls that need to save a complete full stack frame.
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.macro PTREGSCALL label,func,arg
x86: introduce save_rest and restructure the PTREGSCALL macro in entry_64.S Impact: cleanup The save_rest function completes a partial stack frame for use by the PTREGSCALL macro. This also avoids the indirect call in PTREGSCALLs. This adds the macro movq_cfi_restore to hide the CFI_RESTORE annotation when restoring a register from the stack frame. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:41:55 +00:00
ENTRY(\label)
PARTIAL_FRAME 1 8 /* offset 8: return address */
subq $REST_SKIP, %rsp
CFI_ADJUST_CFA_OFFSET REST_SKIP
call save_rest
DEFAULT_FRAME 0 8 /* offset 8: return address */
leaq 8(%rsp), \arg /* pt_regs pointer */
call \func
jmp ptregscall_common
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
END(\label)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.endm
PTREGSCALL stub_clone, sys_clone, %r8
PTREGSCALL stub_fork, sys_fork, %rdi
PTREGSCALL stub_vfork, sys_vfork, %rdi
PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx
PTREGSCALL stub_iopl, sys_iopl, %rsi
ENTRY(ptregscall_common)
x86: introduce save_rest and restructure the PTREGSCALL macro in entry_64.S Impact: cleanup The save_rest function completes a partial stack frame for use by the PTREGSCALL macro. This also avoids the indirect call in PTREGSCALLs. This adds the macro movq_cfi_restore to hide the CFI_RESTORE annotation when restoring a register from the stack frame. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:41:55 +00:00
DEFAULT_FRAME 1 8 /* offset 8: return address */
RESTORE_TOP_OF_STACK %r11, 8
movq_cfi_restore R15+8, r15
movq_cfi_restore R14+8, r14
movq_cfi_restore R13+8, r13
movq_cfi_restore R12+8, r12
movq_cfi_restore RBP+8, rbp
movq_cfi_restore RBX+8, rbx
ret $REST_SKIP /* pop extended registers */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
END(ptregscall_common)
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ENTRY(stub_execve)
CFI_STARTPROC
popq %r11
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET -8
CFI_REGISTER rip, r11
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
SAVE_REST
FIXUP_TOP_OF_STACK %r11
x86: fix execve with -fstack-protect pointed out by pageexec@freemail.hu: > what happens here is that gcc treats the argument area as owned by the > callee, not the caller and is allowed to do certain tricks. for ssp it > will make a copy of the struct passed by value into the local variable > area and pass *its* address down, and it won't copy it back into the > original instance stored in the argument area. > > so once sys_execve returns, the pt_regs passed by value hasn't at all > changed and its default content will cause a nice double fault (FWIW, > this part took me the longest to debug, being down with cold didn't > help it either ;). To fix this we pass in pt_regs by pointer. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26 11:55:57 +00:00
movq %rsp, %rcx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call sys_execve
RESTORE_TOP_OF_STACK %r11
movq %rax,RAX(%rsp)
RESTORE_REST
jmp int_ret_from_sys_call
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
END(stub_execve)
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* sigreturn is special because it needs to restore all registers on return.
* This cannot be done with SYSRET, so use the IRET return path instead.
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ENTRY(stub_rt_sigreturn)
CFI_STARTPROC
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
addq $8, %rsp
CFI_ADJUST_CFA_OFFSET -8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
SAVE_REST
movq %rsp,%rdi
FIXUP_TOP_OF_STACK %r11
call sys_rt_sigreturn
movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer
RESTORE_REST
jmp int_ret_from_sys_call
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
END(stub_rt_sigreturn)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86: 64 bits: shrink and align IRQ stubs Move the IRQ stub generation to assembly to simplify it and for consistency with 32 bits. Doing it in a C file with asm() statements doesn't help clarity, and it prevents some optimizations. Shrink the IRQ stubs down to just over four bytes per (we fit seven into a 32-byte chunk.) This shrinks the total icache consumption of the IRQ stubs down to an even kilobyte, if all of them are in active use. The downside is that we end up with a double jump, which could have a negative effect on some pipelines. The double jump is always inside the same cacheline on any modern chips. To get the most effect, cache-align the IRQ stubs. This makes the 64-bit code match changes already done to the 32-bit code, and should open up irqinit*.c for unification. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-11 21:51:52 +00:00
/*
* Build the entry stubs and pointer table with some assembler magic.
* We pack 7 stubs into a single 32-byte chunk, which will fit in a
* single cache line on all modern x86 implementations.
*/
.section .init.rodata,"a"
ENTRY(interrupt)
.text
.p2align 5
.p2align CONFIG_X86_L1_CACHE_SHIFT
ENTRY(irq_entries_start)
INTR_FRAME
vector=FIRST_EXTERNAL_VECTOR
.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7
.balign 32
.rept 7
.if vector < NR_VECTORS
x86: fix up the new IRQ code for older versions of gas Older versions of gas don't implement the C-style != operator, they instead want the Pascal-style <> operator. Change != to <> so we don't break compilation with those old versions of gas. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-12 18:27:35 +00:00
.if vector <> FIRST_EXTERNAL_VECTOR
x86: 64 bits: shrink and align IRQ stubs Move the IRQ stub generation to assembly to simplify it and for consistency with 32 bits. Doing it in a C file with asm() statements doesn't help clarity, and it prevents some optimizations. Shrink the IRQ stubs down to just over four bytes per (we fit seven into a 32-byte chunk.) This shrinks the total icache consumption of the IRQ stubs down to an even kilobyte, if all of them are in active use. The downside is that we end up with a double jump, which could have a negative effect on some pipelines. The double jump is always inside the same cacheline on any modern chips. To get the most effect, cache-align the IRQ stubs. This makes the 64-bit code match changes already done to the 32-bit code, and should open up irqinit*.c for unification. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-11 21:51:52 +00:00
CFI_ADJUST_CFA_OFFSET -8
.endif
1: pushq $(~vector+0x80) /* Note: always in signed byte range */
CFI_ADJUST_CFA_OFFSET 8
x86: fix up the new IRQ code for older versions of gas Older versions of gas don't implement the C-style != operator, they instead want the Pascal-style <> operator. Change != to <> so we don't break compilation with those old versions of gas. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-12 18:27:35 +00:00
.if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
x86: 64 bits: shrink and align IRQ stubs Move the IRQ stub generation to assembly to simplify it and for consistency with 32 bits. Doing it in a C file with asm() statements doesn't help clarity, and it prevents some optimizations. Shrink the IRQ stubs down to just over four bytes per (we fit seven into a 32-byte chunk.) This shrinks the total icache consumption of the IRQ stubs down to an even kilobyte, if all of them are in active use. The downside is that we end up with a double jump, which could have a negative effect on some pipelines. The double jump is always inside the same cacheline on any modern chips. To get the most effect, cache-align the IRQ stubs. This makes the 64-bit code match changes already done to the 32-bit code, and should open up irqinit*.c for unification. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-11 21:51:52 +00:00
jmp 2f
.endif
.previous
.quad 1b
.text
vector=vector+1
.endif
.endr
2: jmp common_interrupt
.endr
CFI_ENDPROC
END(irq_entries_start)
.previous
END(interrupt)
.previous
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* Interrupt entry/exit.
*
* Interrupt entry points save only callee clobbered registers in fast path.
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
*
* Entry runs with interrupts off.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86: irq: fix apicinterrupts on 64 bits Impact: Fix interrupt via the apicinterrupt macro Checkin 939b787130bf22887a09d8fd2641a094dcef8c22 changed the "interrupt" macro, but the "interrupt" macro is also invoked indirectly from the "apicinterrupt" macro. The "apicinterrupt" macro probably should have its own collection of systematic stubs for the same reason the main IRQ code does; as is it is a huge amount of replicated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-13 12:50:20 +00:00
/* 0(%rsp): ~(interrupt number) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.macro interrupt func
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
subq $10*8, %rsp
CFI_ADJUST_CFA_OFFSET 10*8
call save_args
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
PARTIAL_FRAME 0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call \func
.endm
kprobes/x86-64: Fix to move common_interrupt to .kprobes.text Since nmi, debug and int3 returns to irq_return inside common_interrupt, probing this function will cause int3-loop, so it should be marked as __kprobes. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20090827172325.8246.40000.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-27 17:23:25 +00:00
/*
* Interrupt entry/exit should be protected against kprobes
*/
.pushsection .kprobes.text, "ax"
x86: irq: fix apicinterrupts on 64 bits Impact: Fix interrupt via the apicinterrupt macro Checkin 939b787130bf22887a09d8fd2641a094dcef8c22 changed the "interrupt" macro, but the "interrupt" macro is also invoked indirectly from the "apicinterrupt" macro. The "apicinterrupt" macro probably should have its own collection of systematic stubs for the same reason the main IRQ code does; as is it is a huge amount of replicated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-13 12:50:20 +00:00
/*
* The interrupt stubs push (~vector+0x80) onto the stack and
* then jump to common_interrupt.
*/
x86: 64 bits: shrink and align IRQ stubs Move the IRQ stub generation to assembly to simplify it and for consistency with 32 bits. Doing it in a C file with asm() statements doesn't help clarity, and it prevents some optimizations. Shrink the IRQ stubs down to just over four bytes per (we fit seven into a 32-byte chunk.) This shrinks the total icache consumption of the IRQ stubs down to an even kilobyte, if all of them are in active use. The downside is that we end up with a double jump, which could have a negative effect on some pipelines. The double jump is always inside the same cacheline on any modern chips. To get the most effect, cache-align the IRQ stubs. This makes the 64-bit code match changes already done to the 32-bit code, and should open up irqinit*.c for unification. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-11 21:51:52 +00:00
.p2align CONFIG_X86_L1_CACHE_SHIFT
common_interrupt:
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
XCPT_FRAME
x86: irq: fix apicinterrupts on 64 bits Impact: Fix interrupt via the apicinterrupt macro Checkin 939b787130bf22887a09d8fd2641a094dcef8c22 changed the "interrupt" macro, but the "interrupt" macro is also invoked indirectly from the "apicinterrupt" macro. The "apicinterrupt" macro probably should have its own collection of systematic stubs for the same reason the main IRQ code does; as is it is a huge amount of replicated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-13 12:50:20 +00:00
addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
interrupt do_IRQ
x86-64: Move oldrsp from PDA to per-cpu. tj: * in asm-offsets_64.c, pda.h inclusion shouldn't be removed as pda is still referenced in the file * s/oldrsp/old_rsp/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
/* 0(%rsp): old_rsp-ARGOFFSET */
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
ret_from_intr:
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_OFF
x86-64: Move irqcount from PDA to per-cpu. tj: s/irqcount/irq_count/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
decl PER_CPU_VAR(irq_count)
[PATCH] x86_64: reliable stack trace support (x86-64 IRQ stack Change the switching to/from the IRQ stack so that unwind annotations can be added for it without requiring CFA expressions. AK: I cleaned it up a bit, making it unconditional and removing the obsolete DEBUG_INFO full frame code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:57:35 +00:00
leaveq
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_DEF_CFA_REGISTER rsp
[PATCH] x86_64: reliable stack trace support (x86-64 IRQ stack Change the switching to/from the IRQ stack so that unwind annotations can be added for it without requiring CFA expressions. AK: I cleaned it up a bit, making it unconditional and removing the obsolete DEBUG_INFO full frame code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:57:35 +00:00
CFI_ADJUST_CFA_OFFSET -8
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
exit_intr:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
GET_THREAD_INFO(%rcx)
testl $3,CS-ARGOFFSET(%rsp)
je retint_kernel
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Interrupt came from user space */
/*
* Has a correct top of stack, but a partial stack frame
* %rcx: thread info. Interrupts off.
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
retint_with_reschedule:
movl $_TIF_WORK_MASK,%edi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
retint_check:
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 20:11:12 +00:00
LOCKDEP_SYS_EXIT_IRQ
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 14:19:35 +00:00
movl TI_flags(%rcx),%edx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
andl %edi,%edx
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_REMEMBER_STATE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jnz retint_careful
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 20:11:12 +00:00
retint_swapgs: /* return to user-space */
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
/*
* The iretq could re-enable interrupts:
*/
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
DISABLE_INTERRUPTS(CLBR_ANY)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_IRETQ
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
SWAPGS
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
jmp restore_args
lockdep: x86_64: connect the sysexit hook Run the lockdep_sys_exit hook after all other C code on the syscall return path. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 20:11:12 +00:00
retint_restore_args: /* return to kernel space */
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
DISABLE_INTERRUPTS(CLBR_ANY)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
/*
* The iretq could re-enable interrupts:
*/
TRACE_IRQS_IRETQ
restore_args:
x86: fixup more paravirt fallout Use a common irq_return entry point for all the iret places, which need the paravirt INTERRUPT return wrapper. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 22:24:08 +00:00
RESTORE_ARGS 0,8,0
x86: don't make irq_return global Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: hpa@zytor.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-13 21:29:53 +00:00
irq_return:
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
INTERRUPT_RETURN
x86: fixup more paravirt fallout Use a common irq_return entry point for all the iret places, which need the paravirt INTERRUPT return wrapper. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 22:24:08 +00:00
.section __ex_table, "a"
.quad irq_return, bad_iret
.previous
#ifdef CONFIG_PARAVIRT
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
ENTRY(native_iret)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
iretq
.section __ex_table,"a"
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
.quad native_iret, bad_iret
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.previous
x86: fixup more paravirt fallout Use a common irq_return entry point for all the iret places, which need the paravirt INTERRUPT return wrapper. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 22:24:08 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.section .fixup,"ax"
bad_iret:
x86: make traps on entry code be debuggable in user space, 64-bit Unify the x86-64 behavior for 32-bit processes that set bogus %cs/%ss values (the only ones that can fault in iret) match what the native i386 behavior is. (do not kill the task via do_exit but generate a SIGSEGV signal) [ tglx@linutronix.de: build fix ] Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06 21:39:43 +00:00
/*
* The iret traps when the %cs or %ss being restored is bogus.
* We've lost the original trap vector and error code.
* #GPF is the most likely one to get for an invalid selector.
* So pretend we completed the iret and took the #GPF in user mode.
*
* We are now running with the kernel GS after exception recovery.
* But error_entry expects us to have user GS to match the user %cs,
* so swap back.
*/
pushq $0
SWAPGS
jmp general_protection
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
.previous
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
/* edi: workmask, edx: work */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
retint_careful:
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_RESTORE_STATE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
bt $TIF_NEED_RESCHED,%edx
jnc retint_signal
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pushq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call schedule
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
popq %rdi
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET -8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
GET_THREAD_INFO(%rcx)
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_OFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jmp retint_check
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
retint_signal:
sched: high-res preemption tick Use HR-timers (when available) to deliver an accurate preemption tick. The regular scheduler tick that runs at 1/HZ can be too coarse when nice level are used. The fairness system will still keep the cpu utilisation 'fair' by then delaying the task that got an excessive amount of CPU time but try to minimize this by delivering preemption points spot-on. The average frequency of this extra interrupt is sched_latency / nr_latency. Which need not be higher than 1/HZ, its just that the distribution within the sched_latency period is important. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:29 +00:00
testl $_TIF_DO_NOTIFY_MASK,%edx
[PATCH] x86_64: Readd missing tests in entry.S Cleans up the system exit call slightly and synchronizes with my tree again. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 04:53:19 +00:00
jz retint_swapgs
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_ON
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
ENABLE_INTERRUPTS(CLBR_NONE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
SAVE_REST
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
movq $-1,ORIG_RAX(%rsp)
[PATCH] x86_64: Small assembly improvements Save a byte here and there. Ultimatively useless, but these things always catch my eyes when reading the code so just fix them for now. Also I got at least one patch fixing of them already, which gives a good excuse. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 04:15:48 +00:00
xorl %esi,%esi # oldset
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
movq %rsp,%rdi # &pt_regs
call do_notify_resume
RESTORE_REST
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
DISABLE_INTERRUPTS(CLBR_NONE)
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
TRACE_IRQS_OFF
[PATCH] x86_64: interrupt handling fix - Initialize workmask correctly on interrupt signal handling - Readd missing cli's in the interrupt return path. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 15:58:51 +00:00
GET_THREAD_INFO(%rcx)
x86_64: fix delayed signals On three of the several paths in entry_64.S that call do_notify_resume() on the way back to user mode, we fail to properly check again for newly-arrived work that requires another call to do_notify_resume() before going to user mode. These paths set the mask to check only _TIF_NEED_RESCHED, but this is wrong. The other paths that lead to do_notify_resume() do this correctly already, and entry_32.S does it correctly in all cases. All paths back to user mode have to check all the _TIF_WORK_MASK flags at the last possible stage, with interrupts disabled. Otherwise, we miss any flags (TIF_SIGPENDING for example) that were set any time after we entered do_notify_resume(). More work flags can be set (or left set) synchronously inside do_notify_resume(), as TIF_SIGPENDING can be, or asynchronously by interrupts or other CPUs (which then send an asynchronous interrupt). There are many different scenarios that could hit this bug, most of them races. The simplest one to demonstrate does not require any race: when one signal has done handler setup at the check before returning from a syscall, and there is another signal pending that should be handled. The second signal's handler should interrupt the first signal handler before it actually starts (so the interrupted PC is still at the handler's entry point). Instead, it runs away until the next kernel entry (next syscall, tick, etc). This test behaves correctly on 32-bit kernels, and fails on 64-bit (either 32-bit or 64-bit test binary). With this fix, it works. #define _GNU_SOURCE #include <stdio.h> #include <signal.h> #include <string.h> #include <sys/ucontext.h> #ifndef REG_RIP #define REG_RIP REG_EIP #endif static sig_atomic_t hit1, hit2; static void handler (int sig, siginfo_t *info, void *ctx) { ucontext_t *uc = ctx; if ((void *) uc->uc_mcontext.gregs[REG_RIP] == &handler) { if (sig == SIGUSR1) hit1 = 1; else hit2 = 1; } printf ("%s at %#lx\n", strsignal (sig), uc->uc_mcontext.gregs[REG_RIP]); } int main (void) { struct sigaction sa; sigset_t set; sigemptyset (&sa.sa_mask); sa.sa_flags = SA_SIGINFO; sa.sa_sigaction = &handler; if (sigaction (SIGUSR1, &sa, NULL) || sigaction (SIGUSR2, &sa, NULL)) return 2; sigemptyset (&set); sigaddset (&set, SIGUSR1); sigaddset (&set, SIGUSR2); if (sigprocmask (SIG_BLOCK, &set, NULL)) return 3; printf ("main at %p, handler at %p\n", &main, &handler); raise (SIGUSR1); raise (SIGUSR2); if (sigprocmask (SIG_UNBLOCK, &set, NULL)) return 4; if (hit1 + hit2 == 1) { puts ("PASS"); return 0; } puts ("FAIL"); return 1; } Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10 21:50:39 +00:00
jmp retint_with_reschedule
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_PREEMPT
/* Returning to kernel space. Check if we need preemption */
/* rcx: threadinfo. interrupts off. */
[PATCH] Add proper alignment to ENTRY Previously it didn't align. Use the same one as the C compiler in blended mode, which is good for K8 and Core2 and doesn't hurt on P4. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 08:52:29 +00:00
ENTRY(retint_kernel)
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 14:19:35 +00:00
cmpl $0,TI_preempt_count(%rcx)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jnz retint_restore_args
x86: rename threadinfo to TI. This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 14:19:35 +00:00
bt $TIF_NEED_RESCHED,TI_flags(%rcx)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jnc retint_restore_args
bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
jnc retint_restore_args
call preempt_schedule_irq
jmp exit_intr
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
#endif
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CFI_ENDPROC
[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 11:56:55 +00:00
END(common_interrupt)
kprobes/x86-64: Fix to move common_interrupt to .kprobes.text Since nmi, debug and int3 returns to irq_return inside common_interrupt, probing this function will cause int3-loop, so it should be marked as __kprobes. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20090827172325.8246.40000.stgit@localhost.localdomain> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-27 17:23:25 +00:00
/*
* End of kprobes section
*/
.popsection
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* APIC interrupts.
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
*/
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
.macro apicinterrupt num sym do_sym
ENTRY(\sym)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
INTR_FRAME
[PATCH] x86: increase interrupt vector range Remove the limit of 256 interrupt vectors by changing the value stored in orig_{e,r}ax to be the complemented interrupt vector. The orig_{e,r}ax needs to be < 0 to allow the signal code to distinguish between return from interrupt and return from syscall. With this change applied, NR_IRQS can be > 256. Xen extends the IRQ numbering space to include room for dynamically allocated virtual interrupts (in the range 256-511), which requires a more permissive interface to do_IRQ. Signed-off-by: Ian Pratt <ian.pratt@xensource.com> Signed-off-by: Christian Limpach <Christian.Limpach@cl.cam.ac.uk> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 09:53:44 +00:00
pushq $~(\num)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET 8
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
interrupt \do_sym
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jmp ret_from_intr
CFI_ENDPROC
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
END(\sym)
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
#ifdef CONFIG_SMP
apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \
irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
x86: fix panic with interrupts off (needed for MCE) For some time each panic() called with interrupts disabled triggered the !irqs_disabled() WARN_ON in smp_call_function(), producing ugly backtraces and confusing users. This is a common situation with machine checks for example which tend to call panic with interrupts disabled, but will also hit in other situations e.g. panic during early boot. In fact it means that panic cannot be called in many circumstances, which would be bad. This all started with the new fancy queued smp_call_function, which is then used by the shutdown path to shut down the other CPUs. On closer examination it turned out that the fancy RCU smp_call_function() does lots of things not suitable in a panic situation anyways, like allocating memory and relying on complex system state. I originally tried to patch this over by checking for panic there, but it was quite complicated and the original patch was also not very popular. This also didn't fix some of the underlying complexity problems. The new code in post 2.6.29 tries to patch around this by checking for oops_in_progress, but that is not enough to make this fully safe and I don't think that's a real solution because panic has to be reliable. So instead use an own vector to reboot. This makes the reboot code extremly straight forward, which is definitely a big plus in a panic situation where it is important to avoid relying on too much kernel state. The new simple code is also safe to be called from interupts off region because it is very very simple. There can be situations where it is important that panic is reliable. For example on a fatal machine check the panic is needed to get the system up again and running as quickly as possible. So it's important that panic is reliable and all function it calls simple. This is why I came up with this simple vector scheme. It's very hard to beat in simplicity. Vectors are not particularly precious anymore since all big systems are using per CPU vectors. Another possibility would have been to use an NMI similar to kdump, but there is still the problem that NMIs don't work reliably on some systems due to BIOS issues. NMIs would have been able to stop CPUs running with interrupts off too. In the sake of universal reliability I opted for using a non NMI vector for now. I put the reboot vector into the highest priority bucket of the APIC vectors and moved the 64bit UV_BAU message down instead into the next lower priority. [ Impact: bug fix, fixes an old regression ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-27 19:56:52 +00:00
apicinterrupt REBOOT_VECTOR \
reboot_interrupt smp_reboot_interrupt
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86: make UV support configurable Make X86 SGI Ultraviolet support configurable. Saves about 13K of text size on my modest config. text data bss dec hex filename 6770537 1158680 694356 8623573 8395d5 vmlinux 6757492 1157664 694228 8609384 835e68 vmlinux.nouv Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 03:36:04 +00:00
#ifdef CONFIG_X86_UV
x86: uv bau interrupt -- use proper interrupt number Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Cliff Wickman <cpw@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 21:02:10 +00:00
apicinterrupt UV_BAU_MESSAGE \
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
uv_bau_message_intr1 uv_bau_message_interrupt
x86: make UV support configurable Make X86 SGI Ultraviolet support configurable. Saves about 13K of text size on my modest config. text data bss dec hex filename 6770537 1158680 694356 8623573 8395d5 vmlinux 6757492 1157664 694228 8609384 835e68 vmlinux.nouv Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 03:36:04 +00:00
#endif
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
apicinterrupt LOCAL_TIMER_VECTOR \
apic_timer_interrupt smp_apic_timer_interrupt
x86: UV RTC: Rename generic_interrupt to x86_platform_ipi Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> LKML-Reference: <20091014142257.GE11048@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14 14:22:57 +00:00
apicinterrupt X86_PLATFORM_IPI_VECTOR \
x86_platform_ipi smp_x86_platform_ipi
[PATCH] x86_64: Support for AMD specific MCE Threshold. MC4_MISC - DRAM Errors Threshold Register realized under AMD K8 Rev F. This register is used to count correctable and uncorrectable ECC errors that occur during DRAM read operations. The user may interface through sysfs files in order to change the threshold configuration. bank%d/error_count - reads current error count, write to clear. bank%d/interrupt_enable - set/clear interrupt enable. bank%d/threshold_limit - read/write the threshold limit. APIC vector 0xF9 in hw_irq.h. 5 software defined bank ids in mce.h. new apic.c function to setup threshold apic lvt. defaults to interrupt off, count enabled, and threshold limit max. sysfs interface created on /sys/devices/system/threshold. AK: added some ifdefs to make it compile on UP Signed-off-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05 16:25:53 +00:00
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
#ifdef CONFIG_SMP
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
apicinterrupt INVALIDATE_TLB_VECTOR_START+0 \
invalidate_interrupt0 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+1 \
invalidate_interrupt1 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+2 \
invalidate_interrupt2 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+3 \
invalidate_interrupt3 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+4 \
invalidate_interrupt4 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+5 \
invalidate_interrupt5 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+6 \
invalidate_interrupt6 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+7 \
invalidate_interrupt7 smp_invalidate_interrupt
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
apicinterrupt THRESHOLD_APIC_VECTOR \
x86, mce: enable MCE_INTEL for 32bit new MCE Enable the 64bit MCE_INTEL code (CMCI, thermal interrupts) for 32bit NEW_MCE. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 21:32:56 +00:00
threshold_interrupt smp_threshold_interrupt
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
apicinterrupt THERMAL_APIC_VECTOR \
thermal_interrupt smp_thermal_interrupt
x86, SGI UV: TLB shootdown using broadcast assist unit TLB shootdown for SGI UV. Depends on patch (in tip/x86/irq): x86-update-macros-used-by-uv-platform.patch Jack Steiner May 29 This patch provides the ability to flush TLB's in cpu's that are not on the local node. The hardware mechanism for distributing the flush messages is the UV's "broadcast assist unit". The hook to intercept TLB shootdown requests is a 2-line change to native_flush_tlb_others() (arch/x86/kernel/tlb_64.c). This code has been tested on a hardware simulator. The real hardware is not yet available. The shootdown statistics are provided through /proc/sgi_uv/ptc_statistics. The use of /sys was considered, but would have required the use of many /sys files. The debugfs was also considered, but these statistics should be available on an ongoing basis, not just for debugging. Issues to be fixed later: - The IRQ for the messaging interrupt is currently hardcoded as 200 (see UV_BAU_MESSAGE). It should be dynamically assigned in the future. - The use of appropriate udelay()'s is untested, as they are a problem in the simulator. Signed-off-by: Cliff Wickman <cpw@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 13:56:14 +00:00
x86, mce: implement bootstrapping for machine check wakeups Machine checks support waking up the mcelog daemon quickly. The original wake up code for this was pretty ugly, relying on a idle notifier and a special process flag. The reason it did it this way is that the machine check handler is not subject to normal interrupt locking rules so it's not safe to call wake_up(). Instead it set a process flag and then either did the wakeup in the syscall return or in the idle notifier. This patch adds a new "bootstraping" method as replacement. The idea is that the handler checks if it's in a state where it is unsafe to call wake_up(). If it's safe it calls it directly. When it's not safe -- that is it interrupted in a critical section with interrupts disables -- it uses a new "self IPI" to trigger an IPI to its own CPU. This can be done safely because IPI triggers are atomic with some care. The IPI is raised once the interrupts are reenabled and can then safely call wake_up(). When APICs are disabled the event is just queued and will be picked up eventually by the next polling timer. I think that's a reasonable compromise, since it should only happen quite rarely. Contains fixes from Ying Huang. [ solve conflict on irqinit, make it work on 32bit (entry_arch.h) - HS ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-27 19:56:54 +00:00
#ifdef CONFIG_X86_MCE
apicinterrupt MCE_SELF_VECTOR \
mce_self_interrupt smp_mce_self_interrupt
#endif
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
#ifdef CONFIG_SMP
apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
call_function_single_interrupt smp_call_function_single_interrupt
apicinterrupt CALL_FUNCTION_VECTOR \
call_function_interrupt smp_call_function_interrupt
apicinterrupt RESCHEDULE_VECTOR \
reschedule_interrupt smp_reschedule_interrupt
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
apicinterrupt ERROR_APIC_VECTOR \
error_interrupt smp_error_interrupt
apicinterrupt SPURIOUS_APIC_VECTOR \
spurious_interrupt smp_spurious_interrupt
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
#ifdef CONFIG_PERF_EVENTS
perf_counter: x86: self-IPI for pending work Implement set_perf_counter_pending() with a self-IPI so that it will run ASAP in a usable context. For now use a second IRQ vector, because the primary vector pokes the apic in funny ways that seem to confuse things. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> LKML-Reference: <20090406094517.724626696@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-06 09:45:03 +00:00
apicinterrupt LOCAL_PENDING_VECTOR \
perf_pending_interrupt smp_perf_pending_interrupt
performance counters: x86 support Implement performance counters for x86 Intel CPUs. It's simplified right now: the PERFMON CPU feature is assumed, which is available in Core2 and later Intel CPUs. The design is flexible to be extended to more CPU types as well. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 09:39:53 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Exception entry points.
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
*/
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
.macro zeroentry sym do_sym
ENTRY(\sym)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
INTR_FRAME
x86/paravirt, 64-bit: add adjust_exception_frame 64-bit Xen pushes a couple of extra words onto an exception frame. Add a hook to deal with them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:31 +00:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
x86: entry_64.S: rename Impact: cleanup Rename: CFI_PUSHQ => pushq_cfi CFI_POPQ => popq_cfi CFI_MOVQ => movq_cfi To make it blend better into regular assembly code. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:20:47 +00:00
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
subq $15*8,%rsp
CFI_ADJUST_CFA_OFFSET 15*8
call error_entry
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
DEFAULT_FRAME 0
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
movq %rsp,%rdi /* pt_regs pointer */
xorl %esi,%esi /* no error code */
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
call \do_sym
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
jmp error_exit /* %ebx: no swapgs flag */
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ENDPROC
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
END(\sym)
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
.macro paranoidzeroentry sym do_sym
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
ENTRY(\sym)
x86: entry_64.S: split out some macro's and move common code to paranoid_exit Impact: cleanup DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always executed just before paranoid_exit. Move it there. Split out paranoidzeroentry, paranoiderrorentry, and paranoidzeroentry_ist to get more readable macro's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:44:28 +00:00
INTR_FRAME
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq $-1 /* ORIG_RAX: no syscall to restart */
CFI_ADJUST_CFA_OFFSET 8
subq $15*8, %rsp
call save_paranoid
TRACE_IRQS_OFF
movq %rsp,%rdi /* pt_regs pointer */
xorl %esi,%esi /* no error code */
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
call \do_sym
x86: entry_64.S: split out some macro's and move common code to paranoid_exit Impact: cleanup DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always executed just before paranoid_exit. Move it there. Split out paranoidzeroentry, paranoiderrorentry, and paranoidzeroentry_ist to get more readable macro's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:44:28 +00:00
jmp paranoid_exit /* %ebx: no swapgs flag */
CFI_ENDPROC
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
END(\sym)
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
.endm
x86: entry_64.S: split out some macro's and move common code to paranoid_exit Impact: cleanup DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always executed just before paranoid_exit. Move it there. Split out paranoidzeroentry, paranoiderrorentry, and paranoidzeroentry_ist to get more readable macro's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:44:28 +00:00
x86-64, asm: Directly access per-cpu IST Use a direct per-cpu reference for the IST instead of using a scratch register. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1280594903-6341-1-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-07-31 16:48:22 +00:00
#define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8)
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
.macro paranoidzeroentry_ist sym do_sym ist
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
ENTRY(\sym)
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
INTR_FRAME
x86: entry_64.S: split out some macro's and move common code to paranoid_exit Impact: cleanup DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always executed just before paranoid_exit. Move it there. Split out paranoidzeroentry, paranoiderrorentry, and paranoidzeroentry_ist to get more readable macro's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:44:28 +00:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq $-1 /* ORIG_RAX: no syscall to restart */
CFI_ADJUST_CFA_OFFSET 8
subq $15*8, %rsp
call save_paranoid
TRACE_IRQS_OFF
movq %rsp,%rdi /* pt_regs pointer */
xorl %esi,%esi /* no error code */
x86-64, asm: Directly access per-cpu IST Use a direct per-cpu reference for the IST instead of using a scratch register. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1280594903-6341-1-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-07-31 16:48:22 +00:00
subq $EXCEPTION_STKSZ, INIT_TSS_IST(\ist)
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
call \do_sym
x86-64, asm: Directly access per-cpu IST Use a direct per-cpu reference for the IST instead of using a scratch register. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1280594903-6341-1-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-07-31 16:48:22 +00:00
addq $EXCEPTION_STKSZ, INIT_TSS_IST(\ist)
x86: entry_64.S: split out some macro's and move common code to paranoid_exit Impact: cleanup DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always executed just before paranoid_exit. Move it there. Split out paranoidzeroentry, paranoiderrorentry, and paranoidzeroentry_ist to get more readable macro's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:44:28 +00:00
jmp paranoid_exit /* %ebx: no swapgs flag */
CFI_ENDPROC
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
END(\sym)
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
.endm
x86: entry_64.S: split out some macro's and move common code to paranoid_exit Impact: cleanup DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always executed just before paranoid_exit. Move it there. Split out paranoidzeroentry, paranoiderrorentry, and paranoidzeroentry_ist to get more readable macro's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:44:28 +00:00
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
.macro errorentry sym do_sym
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
ENTRY(\sym)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
XCPT_FRAME
x86/paravirt, 64-bit: add adjust_exception_frame 64-bit Xen pushes a couple of extra words onto an exception frame. Add a hook to deal with them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:31 +00:00
PARAVIRT_ADJUST_EXCEPTION_FRAME
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
subq $15*8,%rsp
CFI_ADJUST_CFA_OFFSET 15*8
call error_entry
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
DEFAULT_FRAME 0
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
movq %rsp,%rdi /* pt_regs pointer */
movq ORIG_RAX(%rsp),%rsi /* get error code */
movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
call \do_sym
x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: <common_interrupt>: (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80214290 <do_IRQ> <ret_from_intr>: ... An apic interrupt stub now look like this: <thermal_interrupt>: (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 <save_args> (5) callq ffffffff80212b8f <smp_thermal_interrupt> (5) jmpq ffffffff80211f93 <ret_from_intr> Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: <overflow>: (6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 <do_overflow> (5) jmpq ffffffff8030e460 <error_exit> And one for an exception with errorcode like this: <segment_not_present>: (6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38> (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 <error_entry> (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 <do_segment_not_present> (5) jmpq ffffffff8030e460 <error_exit> Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:11 +00:00
jmp error_exit /* %ebx: no swapgs flag */
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ENDPROC
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
END(\sym)
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* error code is on the stack already */
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
.macro paranoiderrorentry sym do_sym
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
ENTRY(\sym)
x86: entry_64.S: split out some macro's and move common code to paranoid_exit Impact: cleanup DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always executed just before paranoid_exit. Move it there. Split out paranoidzeroentry, paranoiderrorentry, and paranoidzeroentry_ist to get more readable macro's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:44:28 +00:00
XCPT_FRAME
PARAVIRT_ADJUST_EXCEPTION_FRAME
subq $15*8,%rsp
x86: entry_64.S: factor out save_paranoid and paranoid_exit Impact: cleanup, shrink kernel image size Also expand the paranoid_exit0 macro into nmi_exit inside the nmi stub in the case of enabled irq-tracing. This gives a few hundred bytes code size reduction. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:43:18 +00:00
CFI_ADJUST_CFA_OFFSET 15*8
call save_paranoid
DEFAULT_FRAME 0
traps: x86_64: add TRACE_IRQS_OFF in paranoidentry macro Add TRACE_IRQS_OFF just before entering the C code. All exceptions are taken via interrupt gates. If irq tracing is enabled, it should be notified as soon as possible. Interrupts are only (conditionally) re-enabled in C code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-26 12:03:03 +00:00
TRACE_IRQS_OFF
x86: entry_64.S: split out some macro's and move common code to paranoid_exit Impact: cleanup DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always executed just before paranoid_exit. Move it there. Split out paranoidzeroentry, paranoiderrorentry, and paranoidzeroentry_ist to get more readable macro's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:44:28 +00:00
movq %rsp,%rdi /* pt_regs pointer */
movq ORIG_RAX(%rsp),%rsi /* get error code */
movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
call \do_sym
x86: entry_64.S: split out some macro's and move common code to paranoid_exit Impact: cleanup DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always executed just before paranoid_exit. Move it there. Split out paranoidzeroentry, paranoiderrorentry, and paranoidzeroentry_ist to get more readable macro's. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 15:44:28 +00:00
jmp paranoid_exit /* %ebx: no swapgs flag */
CFI_ENDPROC
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
END(\sym)
.endm
zeroentry divide_error do_divide_error
zeroentry overflow do_overflow
zeroentry bounds do_bounds
zeroentry invalid_op do_invalid_op
zeroentry device_not_available do_device_not_available
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
paranoiderrorentry double_fault do_double_fault
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
zeroentry coprocessor_segment_overrun do_coprocessor_segment_overrun
errorentry invalid_TSS do_invalid_TSS
errorentry segment_not_present do_segment_not_present
zeroentry spurious_interrupt_bug do_spurious_interrupt_bug
zeroentry coprocessor_error do_coprocessor_error
errorentry alignment_check do_alignment_check
zeroentry simd_coprocessor_error do_simd_coprocessor_error
[PATCH] lockdep: irqtrace subsystem, x86_64 support Add irqflags-tracing support to x86_64. [akpm@osdl.org: build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 07:24:45 +00:00
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
/* Reload gs selector with exception handling */
/* edi: new selector */
x86/paravirt, 64-bit: make load_gs_index() a paravirt operation Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-25 04:19:32 +00:00
ENTRY(native_load_gs_index)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_STARTPROC
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
pushf
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET 8
x86: fix paravirt clobber in entry_64.S Impact: Fix latent bug The clobber is trying to say that anything except RDI is available for clobbering, but actually clobbers everything. This hasn't mattered because the clobbers were basically ignored, but subsequent patches will rely on them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-28 22:35:03 +00:00
DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
SWAPGS
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
gs_change:
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
movl %edi,%gs
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
2: mfence /* workaround */
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
SWAPGS
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
popf
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ADJUST_CFA_OFFSET -8
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
ret
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ENDPROC
x86: KPROBE_ENTRY should be paired wth KPROBE_END Impact: move some code out of .kprobes.text KPROBE_ENTRY switches code generation to .kprobes.text, and KPROBE_END uses .popsection to get back to the previous section (.text, normally). Also replace ENDPROC by END, for consistency. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:15:32 +00:00
END(native_load_gs_index)
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
.section __ex_table,"a"
.align 8
.quad gs_change,bad_gs
.previous
.section .fixup,"ax"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* running with kernelgs */
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
bad_gs:
x86: replace privileged instructions with paravirt macros The assembly code in entry_64.S issues a bunch of privileged instructions, like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so, and we then replace them with macros that will do the right thing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 12:32:08 +00:00
SWAPGS /* switch back to user gs */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
xorl %eax,%eax
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
movl %eax,%gs
jmp 2b
.previous
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
x86, 64-bit: Move kernel_thread to C Prepare for merging with 32-bit. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1260380084-3707-2-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-09 17:34:40 +00:00
ENTRY(kernel_thread_helper)
[PATCH] x86_64: Add kernel thread stack frame termination for properly stopping stack unwinds. One open question: Should these added pushes perhaps be made conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO? [AK: Not needed -- these are all very slow paths] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30 17:37:08 +00:00
pushq $0 # fake return address
CFI_STARTPROC
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Here we are in the child and the registers are set as they were
* at kernel_thread() invocation in the parent.
*/
x86, 64-bit: Move kernel_thread to C Prepare for merging with 32-bit. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1260380084-3707-2-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-09 17:34:40 +00:00
call *%rsi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
# exit
x86: return correct error code from child_rip in x86_64 entry.S Right now register edi is just cleared before calling do_exit. That is wrong because correct return value will be ignored. Value from rax should be copied to rdi instead of clearing edi. AK: changed to 32bit move because it's strictly an int [ tglx: arch/x86 adaptation ] Signed-off-by: Andrey Mirkin <major@openvz.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17 16:04:33 +00:00
mov %eax, %edi
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call do_exit
x86, debug: remove the confusing entry in call trace Impact: improve backtrace quality avoid the confusion in call trace because of the lack of padding at the tail of function. When do_exit gets called, the return address behind call instruction is pushed into stack. If something get wrong in do_exit, for x86_64, the entry "kernel_execve +0x00/0xXX" rather than "child_rip +0xYY/0xZZ" is in the call trace. That looks confusing, so add a u2d to make the return address still part of the original call site. (This also catches any instances of us returning from that function somehow.) Signed-off-by: jia zhang <jia.zhang2008@gmail.com> Acked-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 14:47:10 +00:00
ud2 # padding for call trace
[PATCH] x86_64: Add kernel thread stack frame termination for properly stopping stack unwinds. One open question: Should these added pushes perhaps be made conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO? [AK: Not needed -- these are all very slow paths] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30 17:37:08 +00:00
CFI_ENDPROC
x86, 64-bit: Move kernel_thread to C Prepare for merging with 32-bit. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1260380084-3707-2-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-09 17:34:40 +00:00
END(kernel_thread_helper)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* execve(). This function needs to use IRET, not SYSRET, to set up all state properly.
*
* C extern interface:
Mark arguments to certain syscalls as being const Mark arguments to certain system calls as being const where they should be but aren't. The list includes: (*) The filename arguments of various stat syscalls, execve(), various utimes syscalls and some mount syscalls. (*) The filename arguments of some syscall helpers relating to the above. (*) The buffer argument of various write syscalls. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 10:26:22 +00:00
* extern long execve(const char *name, char **argv, char **envp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
* asm input arguments:
* rdi: name, rsi: argv, rdx: envp
*
* We want to fallback into:
Mark arguments to certain syscalls as being const Mark arguments to certain system calls as being const where they should be but aren't. The list includes: (*) The filename arguments of various stat syscalls, execve(), various utimes syscalls and some mount syscalls. (*) The filename arguments of some syscall helpers relating to the above. (*) The buffer argument of various write syscalls. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 10:26:22 +00:00
* extern long sys_execve(const char *name, char **argv,char **envp, struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
* do_sys_execve asm fallback arguments:
x86: fix execve with -fstack-protect pointed out by pageexec@freemail.hu: > what happens here is that gcc treats the argument area as owned by the > callee, not the caller and is allowed to do certain tricks. for ssp it > will make a copy of the struct passed by value into the local variable > area and pass *its* address down, and it won't copy it back into the > original instance stored in the argument area. > > so once sys_execve returns, the pt_regs passed by value hasn't at all > changed and its default content will cause a nice double fault (FWIW, > this part took me the longest to debug, being down with cold didn't > help it either ;). To fix this we pass in pt_regs by pointer. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26 11:55:57 +00:00
* rdi: name, rsi: argv, rdx: envp, rcx: fake frame on the stack
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
[PATCH] rename the provided execve functions to kernel_execve Some architectures provide an execve function that does not set errno, but instead returns the result code directly. Rename these to kernel_execve to get the right semantics there. Moreover, there is no reasone for any of these architectures to still provide __KERNEL_SYSCALLS__ or _syscallN macros, so remove these right away. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andi Kleen <ak@muc.de> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Hirokazu Takata <takata.hirokazu@renesas.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 09:18:31 +00:00
ENTRY(kernel_execve)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
CFI_STARTPROC
FAKE_STACK_FRAME $0
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
SAVE_ALL
x86: fix execve with -fstack-protect pointed out by pageexec@freemail.hu: > what happens here is that gcc treats the argument area as owned by the > callee, not the caller and is allowed to do certain tricks. for ssp it > will make a copy of the struct passed by value into the local variable > area and pass *its* address down, and it won't copy it back into the > original instance stored in the argument area. > > so once sys_execve returns, the pt_regs passed by value hasn't at all > changed and its default content will cause a nice double fault (FWIW, > this part took me the longest to debug, being down with cold didn't > help it either ;). To fix this we pass in pt_regs by pointer. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26 11:55:57 +00:00
movq %rsp,%rcx
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call sys_execve
x86: entry_64.S: remove whitespace at end of lines Impact: cleanup All blame goes to: color white,red "[^[:graph:]]+$" in .nanorc ;). Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 14:29:00 +00:00
movq %rax, RAX(%rsp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
RESTORE_REST
testq %rax,%rax
je int_ret_from_sys_call
RESTORE_ARGS
UNFAKE_STACK_FRAME
ret
CFI_ENDPROC
x86: KPROBE_ENTRY should be paired wth KPROBE_END Impact: move some code out of .kprobes.text KPROBE_ENTRY switches code generation to .kprobes.text, and KPROBE_END uses .popsection to get back to the previous section (.text, normally). Also replace ENDPROC by END, for consistency. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:15:32 +00:00
END(kernel_execve)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 20:37:28 +00:00
/* Call softirq on interrupt stack. Interrupts are off. */
[PATCH] x86_64: Switch to the interrupt stack when running a softirq in local_bh_enable() This avoids some potential stack overflows with very deep softirq callchains. i386 does this too. TOADD CFI annotation Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 04:15:49 +00:00
ENTRY(call_softirq)
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_STARTPROC
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 20:37:28 +00:00
push %rbp
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rbp,0
mov %rsp,%rbp
CFI_DEF_CFA_REGISTER rbp
x86-64: Move irqcount from PDA to per-cpu. tj: s/irqcount/irq_count/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
incl PER_CPU_VAR(irq_count)
x86-64: Convert irqstacks to per-cpu Move the irqstackptr variable from the PDA to per-cpu. Make the stacks themselves per-cpu, removing some specific allocation code. Add a seperate flag (is_boot_cpu) to simplify the per-cpu boot adjustments. tj: * sprinkle some underbars around. * irq_stack_ptr is not used till traps_init(), no reason to initialize it early. On SMP, just leaving it NULL till proper initialization in setup_per_cpu_areas() works. Dropped is_boot_cpu and early irq_stack_ptr initialization. * do DECLARE/DEFINE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack) instead of (char, irq_stack[IRQ_STACK_SIZE]). Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
cmove PER_CPU_VAR(irq_stack_ptr),%rsp
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 20:37:28 +00:00
push %rbp # backlink for old unwinder
[PATCH] x86_64: Switch to the interrupt stack when running a softirq in local_bh_enable() This avoids some potential stack overflows with very deep softirq callchains. i386 does this too. TOADD CFI annotation Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 04:15:49 +00:00
call __do_softirq
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 20:37:28 +00:00
leaveq
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_DEF_CFA_REGISTER rsp
[PATCH] x86_64: Fix backtracing for interrupt stacks Re-add backlink for old style unwinder to stack switching. Add proper stack frame and CFI annotations to call_softirq This prevents a oops when backtracing with fallback through the interrupt stack top. Suggested by Jan Beulich and Herbert Xu wanted it in 2.6.18. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-02 20:37:28 +00:00
CFI_ADJUST_CFA_OFFSET -8
x86-64: Move irqcount from PDA to per-cpu. tj: s/irqcount/irq_count/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
decl PER_CPU_VAR(irq_count)
[PATCH] x86_64: Switch to the interrupt stack when running a softirq in local_bh_enable() This avoids some potential stack overflows with very deep softirq callchains. i386 does this too. TOADD CFI annotation Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 04:15:49 +00:00
ret
[PATCH] x86-64: Fix CFI information Being the foundation for reliable stack unwinding, this fixes CFI unwind annotations in many low-level x86_64 routines, plus a config option (available to all architectures, and also present in the previously sent patch adding such annotations to i386 code) to enable them separatly rather than only along with adding full debug information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 16:49:24 +00:00
CFI_ENDPROC
x86: KPROBE_ENTRY should be paired wth KPROBE_END Impact: move some code out of .kprobes.text KPROBE_ENTRY switches code generation to .kprobes.text, and KPROBE_END uses .popsection to get back to the previous section (.text, normally). Also replace ENDPROC by END, for consistency. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:15:32 +00:00
END(call_softirq)
x86_64: Ignore compat mode SYSCALL when IA32_EMULATION is not defined Previously a program could switch to a compat mode segment and then execute SYSCALL and it would jump to an uninitialized MSR and crash the kernel. Instead supply a dummy target for this case. Pointed out by Jan Beulich Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-23 00:29:25 +00:00
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
#ifdef CONFIG_XEN
x86: include ENTRY/END in entry handlers in entry_64.S Impact: cleanup of entry_64.S Except for the order and the place of the functions, this patch should not change the generated code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:08:28 +00:00
zeroentry xen_hypervisor_callback xen_do_hypervisor_callback
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
/*
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
* A note on the "critical region" in our callback handler.
* We want to avoid stacking callback handlers due to events occurring
* during handling of the last event. To do this, we keep events disabled
* until we've done all processing. HOWEVER, we must enable events before
* popping the stack frame (can't be done atomically) and so it would still
* be possible to get enough handler activations to overflow the stack.
* Although unlikely, bugs of that kind are hard to track down, so we'd
* like to avoid the possibility.
* So, on entry to the handler we detect whether we interrupted an
* existing activation in its critical region -- if so, we pop the current
* activation and restart the handler using the previous one.
*/
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs)
CFI_STARTPROC
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
/*
* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
* see the correct pointer to the pt_regs
*/
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
movq %rdi, %rsp # we don't return, adjust the stack frame
CFI_ENDPROC
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
DEFAULT_FRAME
x86-64: Move irqcount from PDA to per-cpu. tj: s/irqcount/irq_count/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
11: incl PER_CPU_VAR(irq_count)
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
movq %rsp,%rbp
CFI_DEF_CFA_REGISTER rbp
x86-64: Convert irqstacks to per-cpu Move the irqstackptr variable from the PDA to per-cpu. Make the stacks themselves per-cpu, removing some specific allocation code. Add a seperate flag (is_boot_cpu) to simplify the per-cpu boot adjustments. tj: * sprinkle some underbars around. * irq_stack_ptr is not used till traps_init(), no reason to initialize it early. On SMP, just leaving it NULL till proper initialization in setup_per_cpu_areas() works. Dropped is_boot_cpu and early irq_stack_ptr initialization. * do DECLARE/DEFINE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack) instead of (char, irq_stack[IRQ_STACK_SIZE]). Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
pushq %rbp # backlink for old unwinder
call xen_evtchn_do_upcall
popq %rsp
CFI_DEF_CFA_REGISTER rsp
x86-64: Move irqcount from PDA to per-cpu. tj: s/irqcount/irq_count/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-18 15:38:58 +00:00
decl PER_CPU_VAR(irq_count)
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
jmp error_exit
CFI_ENDPROC
END(do_hypervisor_callback)
/*
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
* Hypervisor uses this for application faults while it executes.
* We get here for two reasons:
* 1. Fault while reloading DS, ES, FS or GS
* 2. Fault while executing IRET
* Category 1 we do not need to fix up as Xen has already reloaded all segment
* registers that could be reloaded and zeroed the others.
* Category 2 we fix up by killing the current process. We cannot use the
* normal Linux return path in this case because if we use the IRET hypercall
* to pop the stack frame we end up in an infinite loop of failsafe callbacks.
* We distinguish between categories by comparing each saved segment register
* with its current contents: any discrepancy means we in category 1.
*/
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
ENTRY(xen_failsafe_callback)
x86: clean up after: move entry_64.S register saving out of the macros This add-on patch to x86: move entry_64.S register saving out of the macros visually cleans up the appearance of the code by introducing some basic helper macro's. It also adds some cfi annotations which were missing. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-20 13:40:11 +00:00
INTR_FRAME 1 (6*8)
/*CFI_REL_OFFSET gs,GS*/
/*CFI_REL_OFFSET fs,FS*/
/*CFI_REL_OFFSET es,ES*/
/*CFI_REL_OFFSET ds,DS*/
CFI_REL_OFFSET r11,8
CFI_REL_OFFSET rcx,0
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
movw %ds,%cx
cmpw %cx,0x10(%rsp)
CFI_REMEMBER_STATE
jne 1f
movw %es,%cx
cmpw %cx,0x18(%rsp)
jne 1f
movw %fs,%cx
cmpw %cx,0x20(%rsp)
jne 1f
movw %gs,%cx
cmpw %cx,0x28(%rsp)
jne 1f
/* All segments match their saved values => Category 2 (Bad IRET). */
movq (%rsp),%rcx
CFI_RESTORE rcx
movq 8(%rsp),%r11
CFI_RESTORE r11
addq $0x30,%rsp
CFI_ADJUST_CFA_OFFSET -0x30
x86: entry_64.S: rename Impact: cleanup Rename: CFI_PUSHQ => pushq_cfi CFI_POPQ => popq_cfi CFI_MOVQ => movq_cfi To make it blend better into regular assembly code. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:20:47 +00:00
pushq_cfi $0 /* RIP */
pushq_cfi %r11
pushq_cfi %rcx
xen64: implement failsafe callback Implement the failsafe callback, so that iret and segment register load exceptions are reported to the kernel. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:07:09 +00:00
jmp general_protection
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
CFI_RESTORE_STATE
1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
movq (%rsp),%rcx
CFI_RESTORE rcx
movq 8(%rsp),%r11
CFI_RESTORE r11
addq $0x30,%rsp
CFI_ADJUST_CFA_OFFSET -0x30
x86: entry_64.S: rename Impact: cleanup Rename: CFI_PUSHQ => pushq_cfi CFI_POPQ => popq_cfi CFI_MOVQ => movq_cfi To make it blend better into regular assembly code. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 14:20:47 +00:00
pushq_cfi $0
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
SAVE_ALL
jmp error_exit
CFI_ENDPROC
END(xen_failsafe_callback)
x86/xen: event channels delivery on HVM. Set the callback to receive evtchns from Xen, using the callback vector delivery mechanism. The traditional way for receiving event channel notifications from Xen is via the interrupts from the platform PCI device. The callback vector is a newer alternative that allow us to receive notifications on any vcpu and doesn't need any PCI support: we allocate a vector exclusively to receive events, in the vector handler we don't need to interact with the vlapic, therefore we avoid a VMEXIT. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-05-14 11:40:51 +00:00
apicinterrupt XEN_HVM_EVTCHN_CALLBACK \
xen_hvm_callback_vector xen_evtchn_do_upcall
xen64: add hypervisor callbacks for events, etc Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 22:06:49 +00:00
#endif /* CONFIG_XEN */
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
/*
* Some functions should be protected against kprobes
*/
.pushsection .kprobes.text, "ax"
paranoidzeroentry_ist debug do_debug DEBUG_STACK
paranoidzeroentry_ist int3 do_int3 DEBUG_STACK
paranoiderrorentry stack_segment do_stack_segment
xen/x86-64: fix breakpoints and hardware watchpoints Native x86-64 uses the IST mechanism to run int3 and debug traps on an alternative stack. Xen does not do this, and so the frames were being misinterpreted by the ptrace code. This change special-cases these two exceptions by using Xen variants which run on the normal kernel stack properly. Impact: avoid crash or bad data when IST trap is invoked under Xen Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30 02:56:29 +00:00
#ifdef CONFIG_XEN
zeroentry xen_debug do_debug
zeroentry xen_int3 do_int3
errorentry xen_stack_segment do_stack_segment
#endif
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
errorentry general_protection do_general_protection
errorentry page_fault do_page_fault
#ifdef CONFIG_X86_MCE
x86, mce: use a call vector to call the 64bit mce handler Allows to call different machine check handlers from the low level machine check entry vector. This is needed for later when it will be used for 32bit too. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-27 17:25:48 +00:00
paranoidzeroentry machine_check *machine_check_vector(%rip)
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
#endif
/*
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
* "Paranoid" exit path from exception stack.
* Paranoid because this is used by NMIs and cannot take
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
* any kernel state for granted.
* We don't do kernel preemption checks here, because only
* NMI should be common and it does not enable IRQs and
* cannot get reschedule ticks.
*
* "trace" is 0 for the NMI handler only, because irq-tracing
* is fundamentally NMI-unsafe. (we cannot change the soft and
* hard flags at once, atomically)
*/
/* ebx: no swapgs flag */
ENTRY(paranoid_exit)
INTR_FRAME
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl %ebx,%ebx /* swapgs needed? */
jnz paranoid_restore
testl $3,CS(%rsp)
jnz paranoid_userspace
paranoid_swapgs:
TRACE_IRQS_IRETQ 0
SWAPGS_UNSAFE_STACK
lockdep, x86: account for irqs enabled in paranoid_exit I hit the check_flags error of lockdep: WARNING: at kernel/lockdep.c:2893 check_flags+0x1a7/0x1d0() [...] hardirqs last enabled at (12567): [<ffffffff8026206a>] local_bh_enable+0xaa/0x110 hardirqs last disabled at (12569): [<ffffffff80610c76>] int3+0x16/0x40 softirqs last enabled at (12566): [<ffffffff80514d2b>] lock_sock_nested+0xfb/0x110 softirqs last disabled at (12568): [<ffffffff8058454e>] tcp_prequeue_process+0x2e/0xa0 The check_flags warning of lockdep tells me that lockdep thought interrupts were disabled, but they were really enabled. The numbers in the above parenthesis show the order of events: 12566: softirqs last enabled: lock_sock_nested 12567: hardirqs last enabled: local_bh_enable 12568: softirqs last disabled: tcp_prequeue_process 12566: hardirqs last disabled: int3 int3 is a breakpoint! Examining this further, I have CONFIG_NET_TCPPROBE enabled which adds break points into the kernel. The paranoid_exit of the return of int3 does not account for enabling interrupts on return to kernel. This code is a bit tricky since it is also used by the nmi handler (when lockdep is off), and we must be careful about the swapgs. We can not call kernel code after the swapgs has been performed. [ Impact: fix lockdep check_flags warning + self-turn-off ] Acked-by: Peter Zijlsta <a.p.zijlstra@chello.nl> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-17 12:33:52 +00:00
RESTORE_ALL 8
jmp irq_return
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
paranoid_restore:
lockdep, x86: account for irqs enabled in paranoid_exit I hit the check_flags error of lockdep: WARNING: at kernel/lockdep.c:2893 check_flags+0x1a7/0x1d0() [...] hardirqs last enabled at (12567): [<ffffffff8026206a>] local_bh_enable+0xaa/0x110 hardirqs last disabled at (12569): [<ffffffff80610c76>] int3+0x16/0x40 softirqs last enabled at (12566): [<ffffffff80514d2b>] lock_sock_nested+0xfb/0x110 softirqs last disabled at (12568): [<ffffffff8058454e>] tcp_prequeue_process+0x2e/0xa0 The check_flags warning of lockdep tells me that lockdep thought interrupts were disabled, but they were really enabled. The numbers in the above parenthesis show the order of events: 12566: softirqs last enabled: lock_sock_nested 12567: hardirqs last enabled: local_bh_enable 12568: softirqs last disabled: tcp_prequeue_process 12566: hardirqs last disabled: int3 int3 is a breakpoint! Examining this further, I have CONFIG_NET_TCPPROBE enabled which adds break points into the kernel. The paranoid_exit of the return of int3 does not account for enabling interrupts on return to kernel. This code is a bit tricky since it is also used by the nmi handler (when lockdep is off), and we must be careful about the swapgs. We can not call kernel code after the swapgs has been performed. [ Impact: fix lockdep check_flags warning + self-turn-off ] Acked-by: Peter Zijlsta <a.p.zijlstra@chello.nl> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-17 12:33:52 +00:00
TRACE_IRQS_IRETQ 0
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
RESTORE_ALL 8
jmp irq_return
paranoid_userspace:
GET_THREAD_INFO(%rcx)
movl TI_flags(%rcx),%ebx
andl $_TIF_WORK_MASK,%ebx
jz paranoid_swapgs
movq %rsp,%rdi /* &pt_regs */
call sync_regs
movq %rax,%rsp /* switch stack for scheduling */
testl $_TIF_NEED_RESCHED,%ebx
jnz paranoid_schedule
movl %ebx,%edx /* arg3: thread flags */
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
xorl %esi,%esi /* arg2: oldset */
movq %rsp,%rdi /* arg1: &pt_regs */
call do_notify_resume
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp paranoid_userspace
paranoid_schedule:
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_ANY)
call schedule
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF
jmp paranoid_userspace
CFI_ENDPROC
END(paranoid_exit)
/*
* Exception entry point. This expects an error code/orig_rax on the stack.
* returns in "no swapgs flag" in %ebx.
*/
ENTRY(error_entry)
XCPT_FRAME
CFI_ADJUST_CFA_OFFSET 15*8
/* oldrax contains error code */
cld
movq_cfi rdi, RDI+8
movq_cfi rsi, RSI+8
movq_cfi rdx, RDX+8
movq_cfi rcx, RCX+8
movq_cfi rax, RAX+8
movq_cfi r8, R8+8
movq_cfi r9, R9+8
movq_cfi r10, R10+8
movq_cfi r11, R11+8
movq_cfi rbx, RBX+8
movq_cfi rbp, RBP+8
movq_cfi r12, R12+8
movq_cfi r13, R13+8
movq_cfi r14, R14+8
movq_cfi r15, R15+8
xorl %ebx,%ebx
testl $3,CS+8(%rsp)
je error_kernelspace
error_swapgs:
SWAPGS
error_sti:
TRACE_IRQS_OFF
ret
CFI_ENDPROC
/*
* There are two places in the kernel that can potentially fault with
* usergs. Handle them here. The exception handlers after iret run with
* kernel gs again, so don't set the user space flag. B stepping K8s
* sometimes report an truncated RIP for IRET exceptions returning to
* compat mode. Check for these here too.
*/
error_kernelspace:
incl %ebx
leaq irq_return(%rip),%rcx
cmpq %rcx,RIP+8(%rsp)
je error_swapgs
x86, 64-bit: Move K8 B step iret fixup to fault entry asm Move the handling of truncated %rip from an iret fault to the fault entry path. This allows x86-64 to use the standard search_extable() function. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jan Beulich <jbeulich@novell.com> LKML-Reference: <1255357103-5418-1-git-send-email-brgerst@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 14:18:23 +00:00
movl %ecx,%eax /* zero extend */
cmpq %rax,RIP+8(%rsp)
je bstep_iret
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
cmpq $gs_change,RIP+8(%rsp)
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
je error_swapgs
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
jmp error_sti
x86, 64-bit: Move K8 B step iret fixup to fault entry asm Move the handling of truncated %rip from an iret fault to the fault entry path. This allows x86-64 to use the standard search_extable() function. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jan Beulich <jbeulich@novell.com> LKML-Reference: <1255357103-5418-1-git-send-email-brgerst@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 14:18:23 +00:00
bstep_iret:
/* Fix truncated RIP */
movq %rcx,RIP+8(%rsp)
x86, 64-bit: Fix bstep_iret jump This jump should be unconditional. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1257274925-15713-1-git-send-email-brgerst@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-03 19:02:05 +00:00
jmp error_swapgs
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
END(error_entry)
/* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */
ENTRY(error_exit)
DEFAULT_FRAME
movl %ebx,%eax
RESTORE_REST
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
GET_THREAD_INFO(%rcx)
testl %eax,%eax
jne retint_kernel
LOCKDEP_SYS_EXIT_IRQ
movl TI_flags(%rcx),%edx
movl $_TIF_WORK_MASK,%edi
andl %edi,%edx
jnz retint_careful
jmp retint_swapgs
CFI_ENDPROC
END(error_exit)
/* runs on exception stack */
ENTRY(nmi)
INTR_FRAME
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq_cfi $-1
subq $15*8, %rsp
CFI_ADJUST_CFA_OFFSET 15*8
call save_paranoid
DEFAULT_FRAME 0
/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
movq %rsp,%rdi
movq $-1,%rsi
call do_nmi
#ifdef CONFIG_TRACE_IRQFLAGS
/* paranoidexit; without TRACE_IRQS_OFF */
/* ebx: no swapgs flag */
DISABLE_INTERRUPTS(CLBR_NONE)
testl %ebx,%ebx /* swapgs needed? */
jnz nmi_restore
testl $3,CS(%rsp)
jnz nmi_userspace
nmi_swapgs:
SWAPGS_UNSAFE_STACK
nmi_restore:
RESTORE_ALL 8
jmp irq_return
nmi_userspace:
GET_THREAD_INFO(%rcx)
movl TI_flags(%rcx),%ebx
andl $_TIF_WORK_MASK,%ebx
jz nmi_swapgs
movq %rsp,%rdi /* &pt_regs */
call sync_regs
movq %rax,%rsp /* switch stack for scheduling */
testl $_TIF_NEED_RESCHED,%ebx
jnz nmi_schedule
movl %ebx,%edx /* arg3: thread flags */
ENABLE_INTERRUPTS(CLBR_NONE)
xorl %esi,%esi /* arg2: oldset */
movq %rsp,%rdi /* arg1: &pt_regs */
call do_notify_resume
DISABLE_INTERRUPTS(CLBR_NONE)
jmp nmi_userspace
nmi_schedule:
ENABLE_INTERRUPTS(CLBR_ANY)
call schedule
DISABLE_INTERRUPTS(CLBR_ANY)
jmp nmi_userspace
CFI_ENDPROC
#else
jmp paranoid_exit
x86: entry_64.S - trivial: space, comments fixup Impact: cleanup Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-27 18:10:08 +00:00
CFI_ENDPROC
x86_64: get rid of the use of KPROBE_ENTRY / KPROBE_END Impact: clean up assembly macros and annotations - with some object impact entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on x86_64. This patch reorders entry_64.S and explicitly generates a separate section for functions that need the protection. The generated code before and after the patch is equal. Implicitly changing sections in assembly files makes it more difficult to follow why the assembler is doing certain things. For example, .p2align 5 KPROBE_ENTRY(...) was not doing what you would expect. Other section changes (__ex_table, .fixup, .init.rodata) are done explicitly already. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 12:24:28 +00:00
#endif
END(nmi)
ENTRY(ignore_sysret)
CFI_STARTPROC
mov $-ENOSYS,%eax
sysret
CFI_ENDPROC
END(ignore_sysret)
/*
* End of kprobes section
*/
.popsection
Reference in New Issue Copy Permalink