linux/net/ipv4/inet_hashtables.c

869 lines
22 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Generic INET transport hashtables
*
* Authors: Lotsa people, from code originally in tcp
*/
#include <linux/module.h>
#include <linux/random.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/vmalloc.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:49 +00:00
#include <linux/memblock.h>
#include <net/addrconf.h>
#include <net/inet_connection_sock.h>
#include <net/inet_hashtables.h>
#include <net/secure_seq.h>
#include <net/ip.h>
net: Require exact match for TCP socket lookups if dif is l3mdev Currently, socket lookups for l3mdev (vrf) use cases can match a socket that is bound to a port but not a device (ie., a global socket). If the sysctl tcp_l3mdev_accept is not set this leads to ack packets going out based on the main table even though the packet came in from an L3 domain. The end result is that the connection does not establish creating confusion for users since the service is running and a socket shows in ss output. Fix by requiring an exact dif to sk_bound_dev_if match if the skb came through an interface enslaved to an l3mdev device and the tcp_l3mdev_accept is not set. skb's through an l3mdev interface are marked by setting a flag in inet{6}_skb_parm. The IPv6 variant is already set; this patch adds the flag for IPv4. Using an skb flag avoids a device lookup on the dif. The flag is set in the VRF driver using the IP{6}CB macros. For IPv4, the inet_skb_parm struct is moved in the cb per commit 971f10eca186, so the match function in the TCP stack needs to use TCP_SKB_CB. For IPv6, the move is done after the socket lookup, so IP6CB is used. The flags field in inet_skb_parm struct needs to be increased to add another flag. There is currently a 1-byte hole following the flags, so it can be expanded to u16 without increasing the size of the struct. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 03:02:52 +00:00
#include <net/tcp.h>
#include <net/sock_reuseport.h>
static u32 inet_ehashfn(const struct net *net, const __be32 laddr,
const __u16 lport, const __be32 faddr,
const __be16 fport)
{
static u32 inet_ehash_secret __read_mostly;
net_get_random_once(&inet_ehash_secret, sizeof(inet_ehash_secret));
return __inet_ehashfn(laddr, lport, faddr, fport,
inet_ehash_secret + net_hash_mix(net));
}
/* This function handles inet_sock, but also timewait and request sockets
* for IPv4/IPv6.
*/
static u32 sk_ehashfn(const struct sock *sk)
{
#if IS_ENABLED(CONFIG_IPV6)
if (sk->sk_family == AF_INET6 &&
!ipv6_addr_v4mapped(&sk->sk_v6_daddr))
return inet6_ehashfn(sock_net(sk),
&sk->sk_v6_rcv_saddr, sk->sk_num,
&sk->sk_v6_daddr, sk->sk_dport);
#endif
return inet_ehashfn(sock_net(sk),
sk->sk_rcv_saddr, sk->sk_num,
sk->sk_daddr, sk->sk_dport);
}
/*
* Allocate and initialize a new local port bind bucket.
* The bindhash mutex for snum's hash chain must be held here.
*/
struct inet_bind_bucket *inet_bind_bucket_create(struct kmem_cache *cachep,
struct net *net,
struct inet_bind_hashbucket *head,
const unsigned short snum,
int l3mdev)
{
struct inet_bind_bucket *tb = kmem_cache_alloc(cachep, GFP_ATOMIC);
if (tb) {
write_pnet(&tb->ib_net, net);
tb->l3mdev = l3mdev;
tb->port = snum;
tb->fastreuse = 0;
tb->fastreuseport = 0;
INIT_HLIST_HEAD(&tb->owners);
hlist_add_head(&tb->node, &head->chain);
}
return tb;
}
/*
* Caller must hold hashbucket lock for this tb with local BH disabled
*/
void inet_bind_bucket_destroy(struct kmem_cache *cachep, struct inet_bind_bucket *tb)
{
if (hlist_empty(&tb->owners)) {
__hlist_del(&tb->node);
kmem_cache_free(cachep, tb);
}
}
void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb,
const unsigned short snum)
{
inet_sk(sk)->inet_num = snum;
sk_add_bind_node(sk, &tb->owners);
inet_csk(sk)->icsk_bind_hash = tb;
}
/*
* Get rid of any references to a local port held by the given sock.
*/
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
static void __inet_put_port(struct sock *sk)
{
struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
const int bhash = inet_bhashfn(sock_net(sk), inet_sk(sk)->inet_num,
hashinfo->bhash_size);
struct inet_bind_hashbucket *head = &hashinfo->bhash[bhash];
struct inet_bind_bucket *tb;
spin_lock(&head->lock);
tb = inet_csk(sk)->icsk_bind_hash;
__sk_del_bind_node(sk);
inet_csk(sk)->icsk_bind_hash = NULL;
inet_sk(sk)->inet_num = 0;
inet_bind_bucket_destroy(hashinfo->bind_bucket_cachep, tb);
spin_unlock(&head->lock);
}
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
void inet_put_port(struct sock *sk)
{
local_bh_disable();
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
__inet_put_port(sk);
local_bh_enable();
}
EXPORT_SYMBOL(inet_put_port);
int __inet_inherit_port(const struct sock *sk, struct sock *child)
{
struct inet_hashinfo *table = sk->sk_prot->h.hashinfo;
unsigned short port = inet_sk(child)->inet_num;
const int bhash = inet_bhashfn(sock_net(sk), port,
table->bhash_size);
struct inet_bind_hashbucket *head = &table->bhash[bhash];
struct inet_bind_bucket *tb;
int l3mdev;
spin_lock(&head->lock);
tb = inet_csk(sk)->icsk_bind_hash;
if (unlikely(!tb)) {
spin_unlock(&head->lock);
return -ENOENT;
}
if (tb->port != port) {
l3mdev = inet_sk_bound_l3mdev(sk);
/* NOTE: using tproxy and redirecting skbs to a proxy
* on a different listener port breaks the assumption
* that the listener socket's icsk_bind_hash is the same
* as that of the child socket. We have to look up or
* create a new bind bucket for the child here. */
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:06:00 +00:00
inet_bind_bucket_for_each(tb, &head->chain) {
if (net_eq(ib_net(tb), sock_net(sk)) &&
tb->l3mdev == l3mdev && tb->port == port)
break;
}
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:06:00 +00:00
if (!tb) {
tb = inet_bind_bucket_create(table->bind_bucket_cachep,
sock_net(sk), head, port,
l3mdev);
if (!tb) {
spin_unlock(&head->lock);
return -ENOMEM;
}
}
net: initialize fastreuse on inet_inherit_port In the case of TPROXY, bind_conflict optimizations for SO_REUSEADDR or SO_REUSEPORT are broken, possibly resulting in O(n) instead of O(1) bind behaviour or in the incorrect reuse of a bind. the kernel keeps track for each bind_bucket if all sockets in the bind_bucket support SO_REUSEADDR or SO_REUSEPORT in two fastreuse flags. These flags allow skipping the costly bind_conflict check when possible (meaning when all sockets have the proper SO_REUSE option). For every socket added to a bind_bucket, these flags need to be updated. As soon as a socket that does not support reuse is added, the flag is set to false and will never go back to true, unless the bind_bucket is deleted. Note that there is no mechanism to re-evaluate these flags when a socket is removed (this might make sense when removing a socket that would not allow reuse; this leaves room for a future patch). For this optimization to work, it is mandatory that these flags are properly initialized and updated. When a child socket is created from a listen socket in __inet_inherit_port, the TPROXY case could create a new bind bucket without properly initializing these flags, thus preventing the optimization to work. Alternatively, a socket not allowing reuse could be added to an existing bind bucket without updating the flags, causing bind_conflict to never be called as it should. Call inet_csk_update_fastreuse when __inet_inherit_port decides to create a new bind_bucket or use a different bind_bucket than the one of the listen socket. Fixes: 093d282321da ("tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()") Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Tim Froidcoeur <tim.froidcoeur@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-11 18:33:24 +00:00
inet_csk_update_fastreuse(tb, child);
}
inet_bind_hash(child, tb, port);
spin_unlock(&head->lock);
return 0;
}
EXPORT_SYMBOL_GPL(__inet_inherit_port);
static struct inet_listen_hashbucket *
inet_lhash2_bucket_sk(struct inet_hashinfo *h, struct sock *sk)
{
u32 hash;
#if IS_ENABLED(CONFIG_IPV6)
if (sk->sk_family == AF_INET6)
hash = ipv6_portaddr_hash(sock_net(sk),
&sk->sk_v6_rcv_saddr,
inet_sk(sk)->inet_num);
else
#endif
hash = ipv4_portaddr_hash(sock_net(sk),
inet_sk(sk)->inet_rcv_saddr,
inet_sk(sk)->inet_num);
return inet_lhash2_bucket(h, hash);
}
static void inet_hash2(struct inet_hashinfo *h, struct sock *sk)
{
struct inet_listen_hashbucket *ilb2;
if (!h->lhash2)
return;
ilb2 = inet_lhash2_bucket_sk(h, sk);
spin_lock(&ilb2->lock);
if (sk->sk_reuseport && sk->sk_family == AF_INET6)
hlist_add_tail_rcu(&inet_csk(sk)->icsk_listen_portaddr_node,
&ilb2->head);
else
hlist_add_head_rcu(&inet_csk(sk)->icsk_listen_portaddr_node,
&ilb2->head);
ilb2->count++;
spin_unlock(&ilb2->lock);
}
static void inet_unhash2(struct inet_hashinfo *h, struct sock *sk)
{
struct inet_listen_hashbucket *ilb2;
if (!h->lhash2 ||
WARN_ON_ONCE(hlist_unhashed(&inet_csk(sk)->icsk_listen_portaddr_node)))
return;
ilb2 = inet_lhash2_bucket_sk(h, sk);
spin_lock(&ilb2->lock);
hlist_del_init_rcu(&inet_csk(sk)->icsk_listen_portaddr_node);
ilb2->count--;
spin_unlock(&ilb2->lock);
}
static inline int compute_score(struct sock *sk, struct net *net,
const unsigned short hnum, const __be32 daddr,
const int dif, const int sdif)
{
int score = -1;
if (net_eq(sock_net(sk), net) && sk->sk_num == hnum &&
!ipv6_only_sock(sk)) {
if (sk->sk_rcv_saddr != daddr)
return -1;
if (!inet_sk_bound_dev_eq(net, sk->sk_bound_dev_if, dif, sdif))
return -1;
score = sk->sk_family == PF_INET ? 2 : 1;
net: annotate accesses to sk->sk_incoming_cpu This socket field can be read and written by concurrent cpus. Use READ_ONCE() and WRITE_ONCE() annotations to document this, and avoid some compiler 'optimizations'. KCSAN reported : BUG: KCSAN: data-race in tcp_v4_rcv / tcp_v4_rcv write to 0xffff88812220763c of 4 bytes by interrupt on cpu 0: sk_incoming_cpu_update include/net/sock.h:953 [inline] tcp_v4_rcv+0x1b3c/0x1bb0 net/ipv4/tcp_ipv4.c:1934 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124 process_backlog+0x1d3/0x420 net/core/dev.c:5955 napi_poll net/core/dev.c:6392 [inline] net_rx_action+0x3ae/0xa90 net/core/dev.c:6460 __do_softirq+0x115/0x33f kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 do_softirq.part.0+0x6b/0x80 kernel/softirq.c:337 do_softirq kernel/softirq.c:329 [inline] __local_bh_enable_ip+0x76/0x80 kernel/softirq.c:189 read to 0xffff88812220763c of 4 bytes by interrupt on cpu 1: sk_incoming_cpu_update include/net/sock.h:952 [inline] tcp_v4_rcv+0x181a/0x1bb0 net/ipv4/tcp_ipv4.c:1934 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124 process_backlog+0x1d3/0x420 net/core/dev.c:5955 napi_poll net/core/dev.c:6392 [inline] net_rx_action+0x3ae/0xa90 net/core/dev.c:6460 __do_softirq+0x115/0x33f kernel/softirq.c:292 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30 20:00:04 +00:00
if (READ_ONCE(sk->sk_incoming_cpu) == raw_smp_processor_id())
score++;
}
return score;
}
static inline struct sock *lookup_reuseport(struct net *net, struct sock *sk,
struct sk_buff *skb, int doff,
__be32 saddr, __be16 sport,
__be32 daddr, unsigned short hnum)
{
struct sock *reuse_sk = NULL;
u32 phash;
if (sk->sk_reuseport) {
phash = inet_ehashfn(net, daddr, hnum, saddr, sport);
reuse_sk = reuseport_select_sock(sk, phash, skb, doff);
}
return reuse_sk;
}
/*
* Here are some nice properties to exploit here. The BSD API
* does not allow a listening sock to specify the remote port nor the
* remote address for the connection. So always assume those are both
* wildcarded during the search since they can never be otherwise.
*/
/* called with rcu_read_lock() : No refcount taken on the socket */
static struct sock *inet_lhash2_lookup(struct net *net,
struct inet_listen_hashbucket *ilb2,
struct sk_buff *skb, int doff,
const __be32 saddr, __be16 sport,
const __be32 daddr, const unsigned short hnum,
const int dif, const int sdif)
{
struct inet_connection_sock *icsk;
struct sock *sk, *result = NULL;
int score, hiscore = 0;
inet_lhash2_for_each_icsk_rcu(icsk, &ilb2->head) {
sk = (struct sock *)icsk;
score = compute_score(sk, net, hnum, daddr, dif, sdif);
if (score > hiscore) {
result = lookup_reuseport(net, sk, skb, doff,
saddr, sport, daddr, hnum);
if (result)
return result;
result = sk;
hiscore = score;
}
}
return result;
}
inet: Run SK_LOOKUP BPF program on socket lookup Run a BPF program before looking up a listening socket on the receive path. Program selects a listening socket to yield as result of socket lookup by calling bpf_sk_assign() helper and returning SK_PASS code. Program can revert its decision by assigning a NULL socket with bpf_sk_assign(). Alternatively, BPF program can also fail the lookup by returning with SK_DROP, or let the lookup continue as usual with SK_PASS on return, when no socket has been selected with bpf_sk_assign(). This lets the user match packets with listening sockets freely at the last possible point on the receive path, where we know that packets are destined for local delivery after undergoing policing, filtering, and routing. With BPF code selecting the socket, directing packets destined to an IP range or to a port range to a single socket becomes possible. In case multiple programs are attached, they are run in series in the order in which they were attached. The end result is determined from return codes of all the programs according to following rules: 1. If any program returned SK_PASS and selected a valid socket, the socket is used as result of socket lookup. 2. If more than one program returned SK_PASS and selected a socket, last selection takes effect. 3. If any program returned SK_DROP, and no program returned SK_PASS and selected a socket, socket lookup fails with -ECONNREFUSED. 4. If all programs returned SK_PASS and none of them selected a socket, socket lookup continues to htable-based lookup. Suggested-by: Marek Majkowski <marek@cloudflare.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717103536.397595-5-jakub@cloudflare.com
2020-07-17 10:35:25 +00:00
static inline struct sock *inet_lookup_run_bpf(struct net *net,
struct inet_hashinfo *hashinfo,
struct sk_buff *skb, int doff,
__be32 saddr, __be16 sport,
__be32 daddr, u16 hnum)
{
struct sock *sk, *reuse_sk;
bool no_reuseport;
if (hashinfo != &tcp_hashinfo)
return NULL; /* only TCP is supported */
no_reuseport = bpf_sk_lookup_run_v4(net, IPPROTO_TCP,
saddr, sport, daddr, hnum, &sk);
if (no_reuseport || IS_ERR_OR_NULL(sk))
return sk;
reuse_sk = lookup_reuseport(net, sk, skb, doff, saddr, sport, daddr, hnum);
if (reuse_sk)
sk = reuse_sk;
return sk;
}
struct sock *__inet_lookup_listener(struct net *net,
struct inet_hashinfo *hashinfo,
struct sk_buff *skb, int doff,
const __be32 saddr, __be16 sport,
const __be32 daddr, const unsigned short hnum,
const int dif, const int sdif)
{
struct inet_listen_hashbucket *ilb2;
struct sock *result = NULL;
unsigned int hash2;
inet: Run SK_LOOKUP BPF program on socket lookup Run a BPF program before looking up a listening socket on the receive path. Program selects a listening socket to yield as result of socket lookup by calling bpf_sk_assign() helper and returning SK_PASS code. Program can revert its decision by assigning a NULL socket with bpf_sk_assign(). Alternatively, BPF program can also fail the lookup by returning with SK_DROP, or let the lookup continue as usual with SK_PASS on return, when no socket has been selected with bpf_sk_assign(). This lets the user match packets with listening sockets freely at the last possible point on the receive path, where we know that packets are destined for local delivery after undergoing policing, filtering, and routing. With BPF code selecting the socket, directing packets destined to an IP range or to a port range to a single socket becomes possible. In case multiple programs are attached, they are run in series in the order in which they were attached. The end result is determined from return codes of all the programs according to following rules: 1. If any program returned SK_PASS and selected a valid socket, the socket is used as result of socket lookup. 2. If more than one program returned SK_PASS and selected a socket, last selection takes effect. 3. If any program returned SK_DROP, and no program returned SK_PASS and selected a socket, socket lookup fails with -ECONNREFUSED. 4. If all programs returned SK_PASS and none of them selected a socket, socket lookup continues to htable-based lookup. Suggested-by: Marek Majkowski <marek@cloudflare.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717103536.397595-5-jakub@cloudflare.com
2020-07-17 10:35:25 +00:00
/* Lookup redirect from BPF */
if (static_branch_unlikely(&bpf_sk_lookup_enabled)) {
result = inet_lookup_run_bpf(net, hashinfo, skb, doff,
saddr, sport, daddr, hnum);
if (result)
goto done;
}
hash2 = ipv4_portaddr_hash(net, daddr, hnum);
ilb2 = inet_lhash2_bucket(hashinfo, hash2);
result = inet_lhash2_lookup(net, ilb2, skb, doff,
saddr, sport, daddr, hnum,
dif, sdif);
if (result)
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 08:01:26 +00:00
goto done;
/* Lookup lhash2 with INADDR_ANY */
hash2 = ipv4_portaddr_hash(net, htonl(INADDR_ANY), hnum);
ilb2 = inet_lhash2_bucket(hashinfo, hash2);
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 08:01:26 +00:00
result = inet_lhash2_lookup(net, ilb2, skb, doff,
saddr, sport, htonl(INADDR_ANY), hnum,
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 08:01:26 +00:00
dif, sdif);
done:
if (IS_ERR(result))
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 08:01:26 +00:00
return NULL;
return result;
}
EXPORT_SYMBOL_GPL(__inet_lookup_listener);
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
/* All sockets share common refcount, but have different destructors */
void sock_gen_put(struct sock *sk)
{
if (!refcount_dec_and_test(&sk->sk_refcnt))
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
return;
if (sk->sk_state == TCP_TIME_WAIT)
inet_twsk_free(inet_twsk(sk));
else if (sk->sk_state == TCP_NEW_SYN_RECV)
reqsk_free(inet_reqsk(sk));
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
else
sk_free(sk);
}
EXPORT_SYMBOL_GPL(sock_gen_put);
void sock_edemux(struct sk_buff *skb)
{
sock_gen_put(skb->sk);
}
EXPORT_SYMBOL(sock_edemux);
struct sock *__inet_lookup_established(struct net *net,
struct inet_hashinfo *hashinfo,
const __be32 saddr, const __be16 sport,
const __be32 daddr, const u16 hnum,
const int dif, const int sdif)
{
INET_ADDR_COOKIE(acookie, saddr, daddr);
const __portpair ports = INET_COMBINED_PORTS(sport, hnum);
struct sock *sk;
const struct hlist_nulls_node *node;
/* Optimize here for direct hit, only listening connections can
* have wildcards anyways.
*/
unsigned int hash = inet_ehashfn(net, daddr, hnum, saddr, sport);
unsigned int slot = hash & hashinfo->ehash_mask;
struct inet_ehash_bucket *head = &hashinfo->ehash[slot];
begin:
sk_nulls_for_each_rcu(sk, node, &head->chain) {
net: move inet_dport/inet_num in sock_common commit 68835aba4d9b (net: optimize INET input path further) moved some fields used for tcp/udp sockets lookup in the first cache line of struct sock_common. This patch moves inet_dport/inet_num as well, filling a 32bit hole on 64 bit arches and reducing number of cache line misses in lookups. Also change INET_MATCH()/INET_TW_MATCH() to perform the ports match before addresses match, as this check is more discriminant. Remove the hash check from MATCH() macros because we dont need to re validate the hash value after taking a refcount on socket, and use likely/unlikely compiler hints, as the sk_hash/hash check makes the following conditional tests 100% predicted by cpu. Introduce skc_addrpair/skc_portpair pair values to better document the alignment requirements of the port/addr pairs used in the various MATCH() macros, and remove some casts. The namespace check can also be done at last. This slightly improves TCP/UDP lookup times. IP/TCP early demux needs inet->rx_dst_ifindex and TCP needs inet->min_ttl, lets group them together in same cache line. With help from Ben Hutchings & Joe Perches. Idea of this patch came after Ling Ma proposal to move skc_hash to the beginning of struct sock_common, and should allow him to submit a final version of his patch. My tests show an improvement doing so. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Joe Perches <joe@perches.com> Cc: Ling Ma <ling.ma.program@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 09:49:27 +00:00
if (sk->sk_hash != hash)
continue;
if (likely(INET_MATCH(sk, net, acookie,
saddr, daddr, ports, dif, sdif))) {
if (unlikely(!refcount_inc_not_zero(&sk->sk_refcnt)))
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
goto out;
net: move inet_dport/inet_num in sock_common commit 68835aba4d9b (net: optimize INET input path further) moved some fields used for tcp/udp sockets lookup in the first cache line of struct sock_common. This patch moves inet_dport/inet_num as well, filling a 32bit hole on 64 bit arches and reducing number of cache line misses in lookups. Also change INET_MATCH()/INET_TW_MATCH() to perform the ports match before addresses match, as this check is more discriminant. Remove the hash check from MATCH() macros because we dont need to re validate the hash value after taking a refcount on socket, and use likely/unlikely compiler hints, as the sk_hash/hash check makes the following conditional tests 100% predicted by cpu. Introduce skc_addrpair/skc_portpair pair values to better document the alignment requirements of the port/addr pairs used in the various MATCH() macros, and remove some casts. The namespace check can also be done at last. This slightly improves TCP/UDP lookup times. IP/TCP early demux needs inet->rx_dst_ifindex and TCP needs inet->min_ttl, lets group them together in same cache line. With help from Ben Hutchings & Joe Perches. Idea of this patch came after Ling Ma proposal to move skc_hash to the beginning of struct sock_common, and should allow him to submit a final version of his patch. My tests show an improvement doing so. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Joe Perches <joe@perches.com> Cc: Ling Ma <ling.ma.program@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 09:49:27 +00:00
if (unlikely(!INET_MATCH(sk, net, acookie,
saddr, daddr, ports,
dif, sdif))) {
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
sock_gen_put(sk);
goto begin;
}
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
goto found;
}
}
/*
* if the nulls value we got at the end of this lookup is
* not the expected one, we must restart lookup.
* We probably met an item that was moved to another chain.
*/
if (get_nulls_value(node) != slot)
goto begin;
out:
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
sk = NULL;
found:
return sk;
}
EXPORT_SYMBOL_GPL(__inet_lookup_established);
/* called with local bh disabled */
static int __inet_check_established(struct inet_timewait_death_row *death_row,
struct sock *sk, __u16 lport,
struct inet_timewait_sock **twp)
{
struct inet_hashinfo *hinfo = death_row->hashinfo;
struct inet_sock *inet = inet_sk(sk);
__be32 daddr = inet->inet_rcv_saddr;
__be32 saddr = inet->inet_daddr;
int dif = sk->sk_bound_dev_if;
struct net *net = sock_net(sk);
int sdif = l3mdev_master_ifindex_by_index(net, dif);
INET_ADDR_COOKIE(acookie, saddr, daddr);
const __portpair ports = INET_COMBINED_PORTS(inet->inet_dport, lport);
unsigned int hash = inet_ehashfn(net, daddr, lport,
saddr, inet->inet_dport);
struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash);
spinlock_t *lock = inet_ehash_lockp(hinfo, hash);
struct sock *sk2;
const struct hlist_nulls_node *node;
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
struct inet_timewait_sock *tw = NULL;
spin_lock(lock);
sk_nulls_for_each(sk2, node, &head->chain) {
net: move inet_dport/inet_num in sock_common commit 68835aba4d9b (net: optimize INET input path further) moved some fields used for tcp/udp sockets lookup in the first cache line of struct sock_common. This patch moves inet_dport/inet_num as well, filling a 32bit hole on 64 bit arches and reducing number of cache line misses in lookups. Also change INET_MATCH()/INET_TW_MATCH() to perform the ports match before addresses match, as this check is more discriminant. Remove the hash check from MATCH() macros because we dont need to re validate the hash value after taking a refcount on socket, and use likely/unlikely compiler hints, as the sk_hash/hash check makes the following conditional tests 100% predicted by cpu. Introduce skc_addrpair/skc_portpair pair values to better document the alignment requirements of the port/addr pairs used in the various MATCH() macros, and remove some casts. The namespace check can also be done at last. This slightly improves TCP/UDP lookup times. IP/TCP early demux needs inet->rx_dst_ifindex and TCP needs inet->min_ttl, lets group them together in same cache line. With help from Ben Hutchings & Joe Perches. Idea of this patch came after Ling Ma proposal to move skc_hash to the beginning of struct sock_common, and should allow him to submit a final version of his patch. My tests show an improvement doing so. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Joe Perches <joe@perches.com> Cc: Ling Ma <ling.ma.program@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 09:49:27 +00:00
if (sk2->sk_hash != hash)
continue;
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
net: move inet_dport/inet_num in sock_common commit 68835aba4d9b (net: optimize INET input path further) moved some fields used for tcp/udp sockets lookup in the first cache line of struct sock_common. This patch moves inet_dport/inet_num as well, filling a 32bit hole on 64 bit arches and reducing number of cache line misses in lookups. Also change INET_MATCH()/INET_TW_MATCH() to perform the ports match before addresses match, as this check is more discriminant. Remove the hash check from MATCH() macros because we dont need to re validate the hash value after taking a refcount on socket, and use likely/unlikely compiler hints, as the sk_hash/hash check makes the following conditional tests 100% predicted by cpu. Introduce skc_addrpair/skc_portpair pair values to better document the alignment requirements of the port/addr pairs used in the various MATCH() macros, and remove some casts. The namespace check can also be done at last. This slightly improves TCP/UDP lookup times. IP/TCP early demux needs inet->rx_dst_ifindex and TCP needs inet->min_ttl, lets group them together in same cache line. With help from Ben Hutchings & Joe Perches. Idea of this patch came after Ling Ma proposal to move skc_hash to the beginning of struct sock_common, and should allow him to submit a final version of his patch. My tests show an improvement doing so. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Joe Perches <joe@perches.com> Cc: Ling Ma <ling.ma.program@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 09:49:27 +00:00
if (likely(INET_MATCH(sk2, net, acookie,
saddr, daddr, ports, dif, sdif))) {
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
if (sk2->sk_state == TCP_TIME_WAIT) {
tw = inet_twsk(sk2);
if (twsk_unique(sk, sk2, twp))
break;
}
goto not_unique;
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
}
}
/* Must record num and sport now. Otherwise we will see
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 07:22:02 +00:00
* in hash table socket with a funny identity.
*/
inet->inet_num = lport;
inet->inet_sport = htons(lport);
sk->sk_hash = hash;
WARN_ON(!sk_unhashed(sk));
__sk_nulls_add_node_rcu(sk, &head->chain);
if (tw) {
sk_nulls_del_node_init_rcu((struct sock *)tw);
__NET_INC_STATS(net, LINUX_MIB_TIMEWAITRECYCLED);
}
spin_unlock(lock);
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
if (twp) {
*twp = tw;
} else if (tw) {
/* Silly. Should hash-dance instead... */
inet_twsk_deschedule_put(tw);
}
return 0;
not_unique:
spin_unlock(lock);
return -EADDRNOTAVAIL;
}
static u32 inet_sk_port_offset(const struct sock *sk)
{
const struct inet_sock *inet = inet_sk(sk);
return secure_ipv4_port_ephemeral(inet->inet_rcv_saddr,
inet->inet_daddr,
inet->inet_dport);
}
/* insert a socket into ehash, and eventually remove another one
* (The another one can be a SYN_RECV or TIMEWAIT
*/
bool inet_ehash_insert(struct sock *sk, struct sock *osk)
{
struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
struct hlist_nulls_head *list;
struct inet_ehash_bucket *head;
spinlock_t *lock;
bool ret = true;
WARN_ON_ONCE(!sk_unhashed(sk));
sk->sk_hash = sk_ehashfn(sk);
head = inet_ehash_bucket(hashinfo, sk->sk_hash);
list = &head->chain;
lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
spin_lock(lock);
if (osk) {
WARN_ON_ONCE(sk->sk_hash != osk->sk_hash);
ret = sk_nulls_del_node_init_rcu(osk);
}
if (ret)
__sk_nulls_add_node_rcu(sk, list);
spin_unlock(lock);
return ret;
}
bool inet_ehash_nolisten(struct sock *sk, struct sock *osk)
{
bool ok = inet_ehash_insert(sk, osk);
if (ok) {
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
} else {
percpu_counter_inc(sk->sk_prot->orphan_count);
inet_sk_set_state(sk, TCP_CLOSE);
sock_set_flag(sk, SOCK_DEAD);
inet_csk_destroy_sock(sk);
}
return ok;
}
EXPORT_SYMBOL_GPL(inet_ehash_nolisten);
static int inet_reuseport_add_sock(struct sock *sk,
struct inet_listen_hashbucket *ilb)
{
struct inet_bind_bucket *tb = inet_csk(sk)->icsk_bind_hash;
const struct hlist_nulls_node *node;
struct sock *sk2;
kuid_t uid = sock_i_uid(sk);
sk_nulls_for_each_rcu(sk2, node, &ilb->nulls_head) {
if (sk2 != sk &&
sk2->sk_family == sk->sk_family &&
ipv6_only_sock(sk2) == ipv6_only_sock(sk) &&
sk2->sk_bound_dev_if == sk->sk_bound_dev_if &&
inet_csk(sk2)->icsk_bind_hash == tb &&
sk2->sk_reuseport && uid_eq(uid, sock_i_uid(sk2)) &&
inet_rcv_saddr_equal(sk, sk2, false))
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 08:01:25 +00:00
return reuseport_add_sock(sk, sk2,
inet_rcv_saddr_any(sk));
}
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 08:01:25 +00:00
return reuseport_alloc(sk, inet_rcv_saddr_any(sk));
}
int __inet_hash(struct sock *sk, struct sock *osk)
{
struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
struct inet_listen_hashbucket *ilb;
int err = 0;
if (sk->sk_state != TCP_LISTEN) {
inet_ehash_nolisten(sk, osk);
return 0;
}
WARN_ON(!sk_unhashed(sk));
ilb = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)];
spin_lock(&ilb->lock);
if (sk->sk_reuseport) {
err = inet_reuseport_add_sock(sk, ilb);
if (err)
goto unlock;
}
if (IS_ENABLED(CONFIG_IPV6) && sk->sk_reuseport &&
sk->sk_family == AF_INET6)
__sk_nulls_add_node_tail_rcu(sk, &ilb->nulls_head);
else
__sk_nulls_add_node_rcu(sk, &ilb->nulls_head);
inet_hash2(hashinfo, sk);
ilb->count++;
sock_set_flag(sk, SOCK_RCU_FREE);
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
unlock:
spin_unlock(&ilb->lock);
return err;
}
EXPORT_SYMBOL(__inet_hash);
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
int inet_hash(struct sock *sk)
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
{
int err = 0;
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
if (sk->sk_state != TCP_CLOSE) {
local_bh_disable();
err = __inet_hash(sk, NULL);
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
local_bh_enable();
}
return err;
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
}
EXPORT_SYMBOL_GPL(inet_hash);
void inet_unhash(struct sock *sk)
{
struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
struct inet_listen_hashbucket *ilb = NULL;
spinlock_t *lock;
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
if (sk_unhashed(sk))
return;
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
if (sk->sk_state == TCP_LISTEN) {
ilb = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)];
lock = &ilb->lock;
} else {
lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
}
spin_lock_bh(lock);
if (sk_unhashed(sk))
goto unlock;
if (rcu_access_pointer(sk->sk_reuseport_cb))
reuseport_detach_sock(sk);
if (ilb) {
inet_unhash2(hashinfo, sk);
ilb->count--;
}
__sk_nulls_del_node_init_rcu(sk);
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
unlock:
spin_unlock_bh(lock);
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 12:06:04 +00:00
}
EXPORT_SYMBOL_GPL(inet_unhash);
int __inet_hash_connect(struct inet_timewait_death_row *death_row,
struct sock *sk, u32 port_offset,
int (*check_established)(struct inet_timewait_death_row *,
struct sock *, __u16, struct inet_timewait_sock **))
{
struct inet_hashinfo *hinfo = death_row->hashinfo;
struct inet_timewait_sock *tw = NULL;
struct inet_bind_hashbucket *head;
int port = inet_sk(sk)->inet_num;
struct net *net = sock_net(sk);
struct inet_bind_bucket *tb;
u32 remaining, offset;
int ret, i, low, high;
static u32 hint;
int l3mdev;
if (port) {
head = &hinfo->bhash[inet_bhashfn(net, port,
hinfo->bhash_size)];
tb = inet_csk(sk)->icsk_bind_hash;
spin_lock_bh(&head->lock);
if (sk_head(&tb->owners) == sk && !sk->sk_bind_node.next) {
inet_ehash_nolisten(sk, NULL);
spin_unlock_bh(&head->lock);
return 0;
}
spin_unlock(&head->lock);
/* No definite answer... Walk to established hash table */
ret = check_established(death_row, sk, port, NULL);
local_bh_enable();
return ret;
}
l3mdev = inet_sk_bound_l3mdev(sk);
inet_get_local_port_range(net, &low, &high);
high++; /* [32768, 60999] -> [32768, 61000[ */
remaining = high - low;
if (likely(remaining > 1))
remaining &= ~1U;
offset = (hint + port_offset) % remaining;
/* In first pass we try ports of @low parity.
* inet_csk_get_port() does the opposite choice.
*/
offset &= ~1U;
other_parity_scan:
port = low + offset;
for (i = 0; i < remaining; i += 2, port += 2) {
if (unlikely(port >= high))
port -= remaining;
if (inet_is_local_reserved_port(net, port))
continue;
head = &hinfo->bhash[inet_bhashfn(net, port,
hinfo->bhash_size)];
spin_lock_bh(&head->lock);
/* Does not bother with rcv_saddr checks, because
* the established check is already unique enough.
*/
inet_bind_bucket_for_each(tb, &head->chain) {
if (net_eq(ib_net(tb), net) && tb->l3mdev == l3mdev &&
tb->port == port) {
if (tb->fastreuse >= 0 ||
tb->fastreuseport >= 0)
goto next_port;
WARN_ON(hlist_empty(&tb->owners));
if (!check_established(death_row, sk,
port, &tw))
goto ok;
goto next_port;
}
}
tb = inet_bind_bucket_create(hinfo->bind_bucket_cachep,
net, head, port, l3mdev);
if (!tb) {
spin_unlock_bh(&head->lock);
return -ENOMEM;
}
tb->fastreuse = -1;
tb->fastreuseport = -1;
goto ok;
next_port:
spin_unlock_bh(&head->lock);
cond_resched();
}
offset++;
if ((offset & 1) && remaining > 1)
goto other_parity_scan;
return -EADDRNOTAVAIL;
ok:
hint += i + 2;
/* Head lock still held and bh's disabled */
inet_bind_hash(sk, tb, port);
if (sk_unhashed(sk)) {
inet_sk(sk)->inet_sport = htons(port);
inet_ehash_nolisten(sk, (struct sock *)tw);
}
if (tw)
inet_twsk_bind_unhash(tw, hinfo);
spin_unlock(&head->lock);
if (tw)
inet_twsk_deschedule_put(tw);
local_bh_enable();
return 0;
}
/*
* Bind a port for a connect operation and hash it.
*/
int inet_hash_connect(struct inet_timewait_death_row *death_row,
struct sock *sk)
{
u32 port_offset = 0;
if (!inet_sk(sk)->inet_num)
port_offset = inet_sk_port_offset(sk);
return __inet_hash_connect(death_row, sk, port_offset,
__inet_check_established);
}
EXPORT_SYMBOL_GPL(inet_hash_connect);
void inet_hashinfo_init(struct inet_hashinfo *h)
{
int i;
for (i = 0; i < INET_LHTABLE_SIZE; i++) {
spin_lock_init(&h->listening_hash[i].lock);
INIT_HLIST_NULLS_HEAD(&h->listening_hash[i].nulls_head,
i + LISTENING_NULLS_BASE);
h->listening_hash[i].count = 0;
}
h->lhash2 = NULL;
}
EXPORT_SYMBOL_GPL(inet_hashinfo_init);
static void init_hashinfo_lhash2(struct inet_hashinfo *h)
{
int i;
for (i = 0; i <= h->lhash2_mask; i++) {
spin_lock_init(&h->lhash2[i].lock);
INIT_HLIST_HEAD(&h->lhash2[i].head);
h->lhash2[i].count = 0;
}
}
void __init inet_hashinfo2_init(struct inet_hashinfo *h, const char *name,
unsigned long numentries, int scale,
unsigned long low_limit,
unsigned long high_limit)
{
h->lhash2 = alloc_large_system_hash(name,
sizeof(*h->lhash2),
numentries,
scale,
0,
NULL,
&h->lhash2_mask,
low_limit,
high_limit);
init_hashinfo_lhash2(h);
}
int inet_hashinfo2_init_mod(struct inet_hashinfo *h)
{
h->lhash2 = kmalloc_array(INET_LHTABLE_SIZE, sizeof(*h->lhash2), GFP_KERNEL);
if (!h->lhash2)
return -ENOMEM;
h->lhash2_mask = INET_LHTABLE_SIZE - 1;
/* INET_LHTABLE_SIZE must be a power of 2 */
BUG_ON(INET_LHTABLE_SIZE & h->lhash2_mask);
init_hashinfo_lhash2(h);
return 0;
}
EXPORT_SYMBOL_GPL(inet_hashinfo2_init_mod);
int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo)
{
unsigned int locksz = sizeof(spinlock_t);
unsigned int i, nblocks = 1;
if (locksz != 0) {
/* allocate 2 cache lines or at least one spinlock per cpu */
nblocks = max(2U * L1_CACHE_BYTES / locksz, 1U);
nblocks = roundup_pow_of_two(nblocks * num_possible_cpus());
/* no more locks than number of hash buckets */
nblocks = min(nblocks, hashinfo->ehash_mask + 1);
treewide: use kv[mz]alloc* rather than opencoded variants There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 22:57:27 +00:00
hashinfo->ehash_locks = kvmalloc_array(nblocks, locksz, GFP_KERNEL);
if (!hashinfo->ehash_locks)
return -ENOMEM;
for (i = 0; i < nblocks; i++)
spin_lock_init(&hashinfo->ehash_locks[i]);
}
hashinfo->ehash_locks_mask = nblocks - 1;
return 0;
}
EXPORT_SYMBOL_GPL(inet_ehash_locks_alloc);