linux/arch/arm/mach-tegra/sleep.h

185 lines
5.1 KiB
C
Raw Normal View History

/*
* Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __MACH_TEGRA_SLEEP_H
#define __MACH_TEGRA_SLEEP_H
#include "iomap.h"
#define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \
+ IO_CPU_VIRT)
#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
+ IO_PPSB_VIRT)
#define TEGRA_CLK_RESET_VIRT (TEGRA_CLK_RESET_BASE - IO_PPSB_PHYS \
+ IO_PPSB_VIRT)
#define TEGRA_APB_MISC_VIRT (TEGRA_APB_MISC_BASE - IO_APB_PHYS \
+ IO_APB_VIRT)
#define TEGRA_PMC_VIRT (TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT)
/* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */
#define PMC_SCRATCH37 0x130
#define PMC_SCRATCH38 0x134
#define PMC_SCRATCH39 0x138
#define PMC_SCRATCH41 0x140
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
#define CPU_RESETTABLE 2
#define CPU_RESETTABLE_SOON 1
#define CPU_NOT_RESETTABLE 0
#endif
/* flag of tegra_disable_clean_inv_dcache to do LoUIS or all */
#define TEGRA_FLUSH_CACHE_LOUIS 0
#define TEGRA_FLUSH_CACHE_ALL 1
#ifdef __ASSEMBLY__
ARM: tegra: add LP1 suspend support for Tegra30 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 09:40:04 +00:00
/* waits until the microsecond counter (base) is > rn */
.macro wait_until, rn, base, tmp
add \rn, \rn, #1
1001: ldr \tmp, [\base]
cmp \tmp, \rn
bmi 1001b
.endm
/* returns the offset of the flow controller halt register for a cpu */
.macro cpu_to_halt_reg rd, rcpu
cmp \rcpu, #0
subne \rd, \rcpu, #1
movne \rd, \rd, lsl #3
addne \rd, \rd, #0x14
moveq \rd, #0
.endm
/* returns the offset of the flow controller csr register for a cpu */
.macro cpu_to_csr_reg rd, rcpu
cmp \rcpu, #0
subne \rd, \rcpu, #1
movne \rd, \rd, lsl #3
addne \rd, \rd, #0x18
moveq \rd, #8
.endm
/* returns the ID of the current processor */
.macro cpu_id, rd
mrc p15, 0, \rd, c0, c0, 5
and \rd, \rd, #0xF
.endm
/* loads a 32-bit value into a register without a data access */
.macro mov32, reg, val
movw \reg, #:lower16:\val
movt \reg, #:upper16:\val
.endm
/* Marco to check CPU part num */
.macro check_cpu_part_num part_num, tmp1, tmp2
mrc p15, 0, \tmp1, c0, c0, 0
ubfx \tmp1, \tmp1, #4, #12
mov32 \tmp2, \part_num
cmp \tmp1, \tmp2
.endm
/* Macro to exit SMP coherency. */
.macro exit_smp, tmp1, tmp2
mrc p15, 0, \tmp1, c1, c0, 1 @ ACTLR
bic \tmp1, \tmp1, #(1<<6) | (1<<0) @ clear ACTLR.SMP | ACTLR.FW
mcr p15, 0, \tmp1, c1, c0, 1 @ ACTLR
isb
#ifdef CONFIG_HAVE_ARM_SCU
check_cpu_part_num 0xc09, \tmp1, \tmp2
mrceq p15, 0, \tmp1, c0, c0, 5
andeq \tmp1, \tmp1, #0xF
moveq \tmp1, \tmp1, lsl #2
moveq \tmp2, #0xf
moveq \tmp2, \tmp2, lsl \tmp1
ldreq \tmp1, =(TEGRA_ARM_PERIF_VIRT + 0xC)
streq \tmp2, [\tmp1] @ invalidate SCU tags for CPU
dsb
#endif
.endm
/* Macro to check Tegra revision */
#define APB_MISC_GP_HIDREV 0x804
.macro tegra_get_soc_id base, tmp1
mov32 \tmp1, \base
ldr \tmp1, [\tmp1, #APB_MISC_GP_HIDREV]
and \tmp1, \tmp1, #0xff00
mov \tmp1, \tmp1, lsr #8
.endm
/* Macro to resume & re-enable L2 cache */
#ifndef L2X0_CTRL_EN
#define L2X0_CTRL_EN 1
#endif
#ifdef CONFIG_CACHE_L2X0
.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
W(adr) \tmp1, \phys_l2x0_saved_regs
ldr \tmp1, [\tmp1]
ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE]
ldr \tmp3, [\tmp2, #L2X0_CTRL]
tst \tmp3, #L2X0_CTRL_EN
bne exit_l2_resume
ldr \tmp3, [\tmp1, #L2X0_R_TAG_LATENCY]
str \tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL]
ldr \tmp3, [\tmp1, #L2X0_R_DATA_LATENCY]
str \tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL]
ldr \tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL]
str \tmp3, [\tmp2, #L2X0_PREFETCH_CTRL]
ldr \tmp3, [\tmp1, #L2X0_R_PWR_CTRL]
str \tmp3, [\tmp2, #L2X0_POWER_CTRL]
ldr \tmp3, [\tmp1, #L2X0_R_AUX_CTRL]
str \tmp3, [\tmp2, #L2X0_AUX_CTRL]
mov \tmp3, #L2X0_CTRL_EN
str \tmp3, [\tmp2, #L2X0_CTRL]
exit_l2_resume:
.endm
#else /* CONFIG_CACHE_L2X0 */
.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
.endm
#endif /* CONFIG_CACHE_L2X0 */
#else
void tegra_pen_lock(void);
void tegra_pen_unlock(void);
void tegra_resume(void);
int tegra_sleep_cpu_finish(unsigned long);
void tegra_disable_clean_inv_dcache(u32 flag);
#ifdef CONFIG_HOTPLUG_CPU
void tegra20_hotplug_shutdown(void);
void tegra30_hotplug_shutdown(void);
void tegra_hotplug_init(void);
#else
static inline void tegra_hotplug_init(void) {}
#endif
void tegra20_cpu_shutdown(int cpu);
int tegra20_cpu_is_resettable_soon(void);
void tegra20_cpu_clear_resettable(void);
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void tegra20_cpu_set_resettable_soon(void);
#else
static inline void tegra20_cpu_set_resettable_soon(void) {}
#endif
int tegra20_sleep_cpu_secondary_finish(unsigned long);
void tegra20_tear_down_cpu(void);
int tegra30_sleep_cpu_secondary_finish(unsigned long);
void tegra30_tear_down_cpu(void);
#endif
#endif