linux/fs/dcache.c

3238 lines
84 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* fs/dcache.c
*
* Complete reimplementation
* (C) 1997 Thomas Schoebel-Theuer,
* with heavy changes by Linus Torvalds
*/
/*
* Notes on the allocation strategy:
*
* The dcache is a master of the icache - whenever a dcache entry
* exists, the inode will always exist. "iput()" is done either when
* the dcache entry is deleted or garbage collected.
*/
#include <linux/ratelimit.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/fscrypt.h>
#include <linux/fsnotify.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/hash.h>
#include <linux/cache.h>
#include <linux/export.h>
#include <linux/security.h>
#include <linux/seqlock.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:49 +00:00
#include <linux/memblock.h>
#include <linux/bit_spinlock.h>
#include <linux/rculist_bl.h>
#include <linux/list_lru.h>
#include "internal.h"
#include "mount.h"
/*
* Usage:
* dcache->d_inode->i_lock protects:
* - i_dentry, d_u.d_alias, d_inode of aliases
* dcache_hash_bucket lock protects:
* - the dcache hash table
VFS: don't keep disconnected dentries on d_anon The original purpose of the per-superblock d_anon list was to keep disconnected dentries in the cache between consecutive requests to the NFS server. Dentries can be disconnected if a client holds a file open and repeatedly performs IO on it, and if the server drops the dentry, whether due to memory pressure, server restart, or "echo 3 > /proc/sys/vm/drop_caches". This purpose was thwarted by commit 75a6f82a0d10 ("freeing unlinked file indefinitely delayed") which caused disconnected dentries to be freed as soon as their refcount reached zero. This means that, when a dentry being used by nfsd gets disconnected, a new one needs to be allocated for every request (unless requests overlap). As the dentry has no name, no parent, and no children, there is little of value to cache. As small memory allocations are typically fast (from per-cpu free lists) this likely has little cost. This means that the original purpose of s_anon is no longer relevant: there is no longer any need to keep disconnected dentries on a list so they appear to be hashed. However, s_anon now has a new use. When you mount an NFS filesystem, the dentry stored in s_root is just a placebo. The "real" root dentry is allocated using d_obtain_root() and so it kept on the s_anon list. I don't know the reason for this, but suspect it related to NFSv4 where a mount of "server:/some/path" require NFS to look up the root filehandle on the server, then walk down "/some" and "/path" to get the filehandle to mount. Whatever the reason, NFS depends on the s_anon list and on shrink_dcache_for_umount() pruning all dentries on this list. So we cannot simply remove s_anon. We could just leave the code unchanged, but apart from that being potentially confusing, the (unfair) bit-spin-lock which protects s_anon can become a bottle neck when lots of disconnected dentries are being created. So this patch renames s_anon to s_roots, and stops storing disconnected dentries on the list. Only dentries obtained with d_obtain_root() are now stored on this list. There are many fewer of these (only NFS and NILFS2 use the call, and only during filesystem mount) so contention on the bit-lock will not be a problem. Possibly an alternate solution should be found for NFS and NILFS2, but that would require understanding their needs first. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-20 22:45:40 +00:00
* s_roots bl list spinlock protects:
* - the s_roots list (see __d_drop)
dentry: move to per-sb LRU locks With the dentry LRUs being per-sb structures, there is no real need for a global dentry_lru_lock. The locking can be made more fine-grained by moving to a per-sb LRU lock, isolating the LRU operations of different filesytsems completely from each other. The need for this is independent of any performance consideration that may arise: in the interest of abstracting the lru operations away, it is mandatory that each lru works around its own lock instead of a global lock for all of them. [glommer@openvz.org: updated changelog ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:55 +00:00
* dentry->d_sb->s_dentry_lru_lock protects:
* - the dcache lru lists and counters
* d_lock protects:
* - d_flags
* - d_name
* - d_lru
* - d_count
* - d_unhashed()
* - d_parent and d_subdirs
* - childrens' d_child and d_parent
* - d_u.d_alias, d_inode
*
* Ordering:
* dentry->d_inode->i_lock
* dentry->d_lock
dentry: move to per-sb LRU locks With the dentry LRUs being per-sb structures, there is no real need for a global dentry_lru_lock. The locking can be made more fine-grained by moving to a per-sb LRU lock, isolating the LRU operations of different filesytsems completely from each other. The need for this is independent of any performance consideration that may arise: in the interest of abstracting the lru operations away, it is mandatory that each lru works around its own lock instead of a global lock for all of them. [glommer@openvz.org: updated changelog ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:55 +00:00
* dentry->d_sb->s_dentry_lru_lock
* dcache_hash_bucket lock
VFS: don't keep disconnected dentries on d_anon The original purpose of the per-superblock d_anon list was to keep disconnected dentries in the cache between consecutive requests to the NFS server. Dentries can be disconnected if a client holds a file open and repeatedly performs IO on it, and if the server drops the dentry, whether due to memory pressure, server restart, or "echo 3 > /proc/sys/vm/drop_caches". This purpose was thwarted by commit 75a6f82a0d10 ("freeing unlinked file indefinitely delayed") which caused disconnected dentries to be freed as soon as their refcount reached zero. This means that, when a dentry being used by nfsd gets disconnected, a new one needs to be allocated for every request (unless requests overlap). As the dentry has no name, no parent, and no children, there is little of value to cache. As small memory allocations are typically fast (from per-cpu free lists) this likely has little cost. This means that the original purpose of s_anon is no longer relevant: there is no longer any need to keep disconnected dentries on a list so they appear to be hashed. However, s_anon now has a new use. When you mount an NFS filesystem, the dentry stored in s_root is just a placebo. The "real" root dentry is allocated using d_obtain_root() and so it kept on the s_anon list. I don't know the reason for this, but suspect it related to NFSv4 where a mount of "server:/some/path" require NFS to look up the root filehandle on the server, then walk down "/some" and "/path" to get the filehandle to mount. Whatever the reason, NFS depends on the s_anon list and on shrink_dcache_for_umount() pruning all dentries on this list. So we cannot simply remove s_anon. We could just leave the code unchanged, but apart from that being potentially confusing, the (unfair) bit-spin-lock which protects s_anon can become a bottle neck when lots of disconnected dentries are being created. So this patch renames s_anon to s_roots, and stops storing disconnected dentries on the list. Only dentries obtained with d_obtain_root() are now stored on this list. There are many fewer of these (only NFS and NILFS2 use the call, and only during filesystem mount) so contention on the bit-lock will not be a problem. Possibly an alternate solution should be found for NFS and NILFS2, but that would require understanding their needs first. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-20 22:45:40 +00:00
* s_roots lock
*
* If there is an ancestor relationship:
* dentry->d_parent->...->d_parent->d_lock
* ...
* dentry->d_parent->d_lock
* dentry->d_lock
*
* If no ancestor relationship:
make non-exchanging __d_move() copy ->d_parent rather than swap them Currently d_move(from, to) does the following: * name/parent of from <- old name/parent of to, from hashed there * to is unhashed * name of to is preserved * if from used to be detached, to gets detached * if from used to be attached, parent of to <- old parent of from. That's both user-visibly bogus and complicates reasoning a lot. Much saner semantics would be * name/parent of from <- name/parent of to, from hashed there. * to is unhashed * name/parent of to is unchanged. The price, of course, is that old parent of from might lose a reference. However, * all potentially cross-directory callers of d_move() have both parents pinned directly; typically, dentries themselves are grabbed only after we have grabbed and locked both parents. IOW, the decrement of old parent's refcount in case of d_move() won't reach zero. * __d_move() from d_splice_alias() is done to detached alias. No refcount decrements in that case * __d_move() from __d_unalias() *can* get the refcount to zero. So let's grab a reference to alias' old parent before calling __d_unalias() and dput() it after we'd dropped rename_lock. That does make d_splice_alias() potentially blocking. However, it has no callers in non-sleepable contexts (and the case where we'd grown that dget/dput pair is _very_ rare, so performance is not an issue). Another thing that needs adjustment is unlocking in the end of __d_move(); folded it in. And cleaned the remnants of bogus ordering from the "lock them in the beginning" counterpart - it's never been right and now (well, for 7 years now) we have that thing always serialized on rename_lock anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-11 04:15:52 +00:00
* arbitrary, since it's serialized on rename_lock
*/
int sysctl_vfs_cache_pressure __read_mostly = 100;
EXPORT_SYMBOL_GPL(sysctl_vfs_cache_pressure);
__cacheline_aligned_in_smp DEFINE_SEQLOCK(rename_lock);
EXPORT_SYMBOL(rename_lock);
static struct kmem_cache *dentry_cache __read_mostly;
const struct qstr empty_name = QSTR_INIT("", 0);
EXPORT_SYMBOL(empty_name);
const struct qstr slash_name = QSTR_INIT("/", 1);
EXPORT_SYMBOL(slash_name);
/*
* This is the single most critical data structure when it comes
* to the dcache: the hashtable for lookups. Somebody should try
* to make this good - I've just made it work.
*
* This hash-function tries to avoid losing too many bits of hash
* information, yet avoid using a prime hash-size or similar.
*/
static unsigned int d_hash_shift __read_mostly;
static struct hlist_bl_head *dentry_hashtable __read_mostly;
static inline struct hlist_bl_head *d_hash(unsigned int hash)
{
return dentry_hashtable + (hash >> d_hash_shift);
}
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
#define IN_LOOKUP_SHIFT 10
static struct hlist_bl_head in_lookup_hashtable[1 << IN_LOOKUP_SHIFT];
static inline struct hlist_bl_head *in_lookup_hash(const struct dentry *parent,
unsigned int hash)
{
hash += (unsigned long) parent / L1_CACHE_BYTES;
return in_lookup_hashtable + hash_32(hash, IN_LOOKUP_SHIFT);
}
/* Statistics gathering. */
struct dentry_stat_t dentry_stat = {
.age_limit = 45,
};
fs: bump inode and dentry counters to long This series reworks our current object cache shrinking infrastructure in two main ways: * Noticing that a lot of users copy and paste their own version of LRU lists for objects, we put some effort in providing a generic version. It is modeled after the filesystem users: dentries, inodes, and xfs (for various tasks), but we expect that other users could benefit in the near future with little or no modification. Let us know if you have any issues. * The underlying list_lru being proposed automatically and transparently keeps the elements in per-node lists, and is able to manipulate the node lists individually. Given this infrastructure, we are able to modify the up-to-now hammer called shrink_slab to proceed with node-reclaim instead of always searching memory from all over like it has been doing. Per-node lru lists are also expected to lead to less contention in the lru locks on multi-node scans, since we are now no longer fighting for a global lock. The locks usually disappear from the profilers with this change. Although we have no official benchmarks for this version - be our guest to independently evaluate this - earlier versions of this series were performance tested (details at http://permalink.gmane.org/gmane.linux.kernel.mm/100537) yielding no visible performance regressions while yielding a better qualitative behavior in NUMA machines. With this infrastructure in place, we can use the list_lru entry point to provide memcg isolation and per-memcg targeted reclaim. Historically, those two pieces of work have been posted together. This version presents only the infrastructure work, deferring the memcg work for a later time, so we can focus on getting this part tested. You can see more about the history of such work at http://lwn.net/Articles/552769/ Dave Chinner (18): dcache: convert dentry_stat.nr_unused to per-cpu counters dentry: move to per-sb LRU locks dcache: remove dentries from LRU before putting on dispose list mm: new shrinker API shrinker: convert superblock shrinkers to new API list: add a new LRU list type inode: convert inode lru list to generic lru list code. dcache: convert to use new lru list infrastructure list_lru: per-node list infrastructure shrinker: add node awareness fs: convert inode and dentry shrinking to be node aware xfs: convert buftarg LRU to generic code xfs: rework buffer dispose list tracking xfs: convert dquot cache lru to list_lru fs: convert fs shrinkers to new scan/count API drivers: convert shrinkers to new count/scan API shrinker: convert remaining shrinkers to count/scan API shrinker: Kill old ->shrink API. Glauber Costa (7): fs: bump inode and dentry counters to long super: fix calculation of shrinkable objects for small numbers list_lru: per-node API vmscan: per-node deferred work i915: bail out earlier when shrinker cannot acquire mutex hugepage: convert huge zero page shrinker to new shrinker API list_lru: dynamically adjust node arrays This patch: There are situations in very large machines in which we can have a large quantity of dirty inodes, unused dentries, etc. This is particularly true when umounting a filesystem, where eventually since every live object will eventually be discarded. Dave Chinner reported a problem with this while experimenting with the shrinker revamp patchset. So we believe it is time for a change. This patch just moves int to longs. Machines where it matters should have a big long anyway. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <dchinner@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:53 +00:00
static DEFINE_PER_CPU(long, nr_dentry);
dcache: convert dentry_stat.nr_unused to per-cpu counters Before we split up the dcache_lru_lock, the unused dentry counter needs to be made independent of the global dcache_lru_lock. Convert it to per-cpu counters to do this. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:54 +00:00
static DEFINE_PER_CPU(long, nr_dentry_unused);
static DEFINE_PER_CPU(long, nr_dentry_negative);
#if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
dcache: convert dentry_stat.nr_unused to per-cpu counters Before we split up the dcache_lru_lock, the unused dentry counter needs to be made independent of the global dcache_lru_lock. Convert it to per-cpu counters to do this. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:54 +00:00
/*
* Here we resort to our own counters instead of using generic per-cpu counters
* for consistency with what the vfs inode code does. We are expected to harvest
* better code and performance by having our own specialized counters.
*
* Please note that the loop is done over all possible CPUs, not over all online
* CPUs. The reason for this is that we don't want to play games with CPUs going
* on and off. If one of them goes off, we will just keep their counters.
*
* glommer: See cffbc8a for details, and if you ever intend to change this,
* please update all vfs counters to match.
*/
fs: bump inode and dentry counters to long This series reworks our current object cache shrinking infrastructure in two main ways: * Noticing that a lot of users copy and paste their own version of LRU lists for objects, we put some effort in providing a generic version. It is modeled after the filesystem users: dentries, inodes, and xfs (for various tasks), but we expect that other users could benefit in the near future with little or no modification. Let us know if you have any issues. * The underlying list_lru being proposed automatically and transparently keeps the elements in per-node lists, and is able to manipulate the node lists individually. Given this infrastructure, we are able to modify the up-to-now hammer called shrink_slab to proceed with node-reclaim instead of always searching memory from all over like it has been doing. Per-node lru lists are also expected to lead to less contention in the lru locks on multi-node scans, since we are now no longer fighting for a global lock. The locks usually disappear from the profilers with this change. Although we have no official benchmarks for this version - be our guest to independently evaluate this - earlier versions of this series were performance tested (details at http://permalink.gmane.org/gmane.linux.kernel.mm/100537) yielding no visible performance regressions while yielding a better qualitative behavior in NUMA machines. With this infrastructure in place, we can use the list_lru entry point to provide memcg isolation and per-memcg targeted reclaim. Historically, those two pieces of work have been posted together. This version presents only the infrastructure work, deferring the memcg work for a later time, so we can focus on getting this part tested. You can see more about the history of such work at http://lwn.net/Articles/552769/ Dave Chinner (18): dcache: convert dentry_stat.nr_unused to per-cpu counters dentry: move to per-sb LRU locks dcache: remove dentries from LRU before putting on dispose list mm: new shrinker API shrinker: convert superblock shrinkers to new API list: add a new LRU list type inode: convert inode lru list to generic lru list code. dcache: convert to use new lru list infrastructure list_lru: per-node list infrastructure shrinker: add node awareness fs: convert inode and dentry shrinking to be node aware xfs: convert buftarg LRU to generic code xfs: rework buffer dispose list tracking xfs: convert dquot cache lru to list_lru fs: convert fs shrinkers to new scan/count API drivers: convert shrinkers to new count/scan API shrinker: convert remaining shrinkers to count/scan API shrinker: Kill old ->shrink API. Glauber Costa (7): fs: bump inode and dentry counters to long super: fix calculation of shrinkable objects for small numbers list_lru: per-node API vmscan: per-node deferred work i915: bail out earlier when shrinker cannot acquire mutex hugepage: convert huge zero page shrinker to new shrinker API list_lru: dynamically adjust node arrays This patch: There are situations in very large machines in which we can have a large quantity of dirty inodes, unused dentries, etc. This is particularly true when umounting a filesystem, where eventually since every live object will eventually be discarded. Dave Chinner reported a problem with this while experimenting with the shrinker revamp patchset. So we believe it is time for a change. This patch just moves int to longs. Machines where it matters should have a big long anyway. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <dchinner@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:53 +00:00
static long get_nr_dentry(void)
fs: use fast counters for vfs caches percpu_counter library generates quite nasty code, so unless you need to dynamically allocate counters or take fast approximate value, a simple per cpu set of counters is much better. The percpu_counter can never be made to work as well, because it has an indirection from pointer to percpu memory, and it can't use direct this_cpu_inc interfaces because it doesn't use static PER_CPU data, so code will always be worse. In the fastpath, it is the difference between this: incl %gs:nr_dentry # nr_dentry and this: movl percpu_counter_batch(%rip), %edx # percpu_counter_batch, movl $1, %esi #, movq $nr_dentry, %rdi #, call __percpu_counter_add # (plus I clobber registers) __percpu_counter_add: pushq %rbp # movq %rsp, %rbp #, subq $32, %rsp #, movq %rbx, -24(%rbp) #, movq %r12, -16(%rbp) #, movq %r13, -8(%rbp) #, movq %rdi, %rbx # fbc, fbc #APP # 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1 movq %gs:kernel_stack,%rax #, pfo_ret__ # 0 "" 2 #NO_APP incl -8124(%rax) # <variable>.preempt_count movq 32(%rdi), %r12 # <variable>.counters, tcp_ptr__ #APP # 78 "lib/percpu_counter.c" 1 add %gs:this_cpu_off, %r12 # this_cpu_off, tcp_ptr__ # 0 "" 2 #NO_APP movslq (%r12),%r13 #* tcp_ptr__, tmp73 movslq %edx,%rax # batch, batch addq %rsi, %r13 # amount, count cmpq %rax, %r13 # batch, count jge .L27 #, negl %edx # tmp76 movslq %edx,%rdx # tmp76, tmp77 cmpq %rdx, %r13 # tmp77, count jg .L28 #, .L27: movq %rbx, %rdi # fbc, call _raw_spin_lock # addq %r13, 8(%rbx) # count, <variable>.count movq %rbx, %rdi # fbc, movl $0, (%r12) #,* tcp_ptr__ call _raw_spin_unlock # .L29: #APP # 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1 movq %gs:kernel_stack,%rax #, pfo_ret__ # 0 "" 2 #NO_APP decl -8124(%rax) # <variable>.preempt_count movq -8136(%rax), %rax #, D.14625 testb $8, %al #, D.14625 jne .L32 #, .L31: movq -24(%rbp), %rbx #, movq -16(%rbp), %r12 #, movq -8(%rbp), %r13 #, leave ret .p2align 4,,10 .p2align 3 .L28: movl %r13d, (%r12) # count,* jmp .L29 # .L32: call preempt_schedule # .p2align 4,,6 jmp .L31 # .size __percpu_counter_add, .-__percpu_counter_add .p2align 4,,15 Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:19 +00:00
{
int i;
fs: bump inode and dentry counters to long This series reworks our current object cache shrinking infrastructure in two main ways: * Noticing that a lot of users copy and paste their own version of LRU lists for objects, we put some effort in providing a generic version. It is modeled after the filesystem users: dentries, inodes, and xfs (for various tasks), but we expect that other users could benefit in the near future with little or no modification. Let us know if you have any issues. * The underlying list_lru being proposed automatically and transparently keeps the elements in per-node lists, and is able to manipulate the node lists individually. Given this infrastructure, we are able to modify the up-to-now hammer called shrink_slab to proceed with node-reclaim instead of always searching memory from all over like it has been doing. Per-node lru lists are also expected to lead to less contention in the lru locks on multi-node scans, since we are now no longer fighting for a global lock. The locks usually disappear from the profilers with this change. Although we have no official benchmarks for this version - be our guest to independently evaluate this - earlier versions of this series were performance tested (details at http://permalink.gmane.org/gmane.linux.kernel.mm/100537) yielding no visible performance regressions while yielding a better qualitative behavior in NUMA machines. With this infrastructure in place, we can use the list_lru entry point to provide memcg isolation and per-memcg targeted reclaim. Historically, those two pieces of work have been posted together. This version presents only the infrastructure work, deferring the memcg work for a later time, so we can focus on getting this part tested. You can see more about the history of such work at http://lwn.net/Articles/552769/ Dave Chinner (18): dcache: convert dentry_stat.nr_unused to per-cpu counters dentry: move to per-sb LRU locks dcache: remove dentries from LRU before putting on dispose list mm: new shrinker API shrinker: convert superblock shrinkers to new API list: add a new LRU list type inode: convert inode lru list to generic lru list code. dcache: convert to use new lru list infrastructure list_lru: per-node list infrastructure shrinker: add node awareness fs: convert inode and dentry shrinking to be node aware xfs: convert buftarg LRU to generic code xfs: rework buffer dispose list tracking xfs: convert dquot cache lru to list_lru fs: convert fs shrinkers to new scan/count API drivers: convert shrinkers to new count/scan API shrinker: convert remaining shrinkers to count/scan API shrinker: Kill old ->shrink API. Glauber Costa (7): fs: bump inode and dentry counters to long super: fix calculation of shrinkable objects for small numbers list_lru: per-node API vmscan: per-node deferred work i915: bail out earlier when shrinker cannot acquire mutex hugepage: convert huge zero page shrinker to new shrinker API list_lru: dynamically adjust node arrays This patch: There are situations in very large machines in which we can have a large quantity of dirty inodes, unused dentries, etc. This is particularly true when umounting a filesystem, where eventually since every live object will eventually be discarded. Dave Chinner reported a problem with this while experimenting with the shrinker revamp patchset. So we believe it is time for a change. This patch just moves int to longs. Machines where it matters should have a big long anyway. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <dchinner@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:53 +00:00
long sum = 0;
fs: use fast counters for vfs caches percpu_counter library generates quite nasty code, so unless you need to dynamically allocate counters or take fast approximate value, a simple per cpu set of counters is much better. The percpu_counter can never be made to work as well, because it has an indirection from pointer to percpu memory, and it can't use direct this_cpu_inc interfaces because it doesn't use static PER_CPU data, so code will always be worse. In the fastpath, it is the difference between this: incl %gs:nr_dentry # nr_dentry and this: movl percpu_counter_batch(%rip), %edx # percpu_counter_batch, movl $1, %esi #, movq $nr_dentry, %rdi #, call __percpu_counter_add # (plus I clobber registers) __percpu_counter_add: pushq %rbp # movq %rsp, %rbp #, subq $32, %rsp #, movq %rbx, -24(%rbp) #, movq %r12, -16(%rbp) #, movq %r13, -8(%rbp) #, movq %rdi, %rbx # fbc, fbc #APP # 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1 movq %gs:kernel_stack,%rax #, pfo_ret__ # 0 "" 2 #NO_APP incl -8124(%rax) # <variable>.preempt_count movq 32(%rdi), %r12 # <variable>.counters, tcp_ptr__ #APP # 78 "lib/percpu_counter.c" 1 add %gs:this_cpu_off, %r12 # this_cpu_off, tcp_ptr__ # 0 "" 2 #NO_APP movslq (%r12),%r13 #* tcp_ptr__, tmp73 movslq %edx,%rax # batch, batch addq %rsi, %r13 # amount, count cmpq %rax, %r13 # batch, count jge .L27 #, negl %edx # tmp76 movslq %edx,%rdx # tmp76, tmp77 cmpq %rdx, %r13 # tmp77, count jg .L28 #, .L27: movq %rbx, %rdi # fbc, call _raw_spin_lock # addq %r13, 8(%rbx) # count, <variable>.count movq %rbx, %rdi # fbc, movl $0, (%r12) #,* tcp_ptr__ call _raw_spin_unlock # .L29: #APP # 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1 movq %gs:kernel_stack,%rax #, pfo_ret__ # 0 "" 2 #NO_APP decl -8124(%rax) # <variable>.preempt_count movq -8136(%rax), %rax #, D.14625 testb $8, %al #, D.14625 jne .L32 #, .L31: movq -24(%rbp), %rbx #, movq -16(%rbp), %r12 #, movq -8(%rbp), %r13 #, leave ret .p2align 4,,10 .p2align 3 .L28: movl %r13d, (%r12) # count,* jmp .L29 # .L32: call preempt_schedule # .p2align 4,,6 jmp .L31 # .size __percpu_counter_add, .-__percpu_counter_add .p2align 4,,15 Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:19 +00:00
for_each_possible_cpu(i)
sum += per_cpu(nr_dentry, i);
return sum < 0 ? 0 : sum;
}
dcache: convert dentry_stat.nr_unused to per-cpu counters Before we split up the dcache_lru_lock, the unused dentry counter needs to be made independent of the global dcache_lru_lock. Convert it to per-cpu counters to do this. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:54 +00:00
static long get_nr_dentry_unused(void)
{
int i;
long sum = 0;
for_each_possible_cpu(i)
sum += per_cpu(nr_dentry_unused, i);
return sum < 0 ? 0 : sum;
}
static long get_nr_dentry_negative(void)
{
int i;
long sum = 0;
for_each_possible_cpu(i)
sum += per_cpu(nr_dentry_negative, i);
return sum < 0 ? 0 : sum;
}
int proc_nr_dentry(struct ctl_table *table, int write, void *buffer,
size_t *lenp, loff_t *ppos)
{
fs: use fast counters for vfs caches percpu_counter library generates quite nasty code, so unless you need to dynamically allocate counters or take fast approximate value, a simple per cpu set of counters is much better. The percpu_counter can never be made to work as well, because it has an indirection from pointer to percpu memory, and it can't use direct this_cpu_inc interfaces because it doesn't use static PER_CPU data, so code will always be worse. In the fastpath, it is the difference between this: incl %gs:nr_dentry # nr_dentry and this: movl percpu_counter_batch(%rip), %edx # percpu_counter_batch, movl $1, %esi #, movq $nr_dentry, %rdi #, call __percpu_counter_add # (plus I clobber registers) __percpu_counter_add: pushq %rbp # movq %rsp, %rbp #, subq $32, %rsp #, movq %rbx, -24(%rbp) #, movq %r12, -16(%rbp) #, movq %r13, -8(%rbp) #, movq %rdi, %rbx # fbc, fbc #APP # 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1 movq %gs:kernel_stack,%rax #, pfo_ret__ # 0 "" 2 #NO_APP incl -8124(%rax) # <variable>.preempt_count movq 32(%rdi), %r12 # <variable>.counters, tcp_ptr__ #APP # 78 "lib/percpu_counter.c" 1 add %gs:this_cpu_off, %r12 # this_cpu_off, tcp_ptr__ # 0 "" 2 #NO_APP movslq (%r12),%r13 #* tcp_ptr__, tmp73 movslq %edx,%rax # batch, batch addq %rsi, %r13 # amount, count cmpq %rax, %r13 # batch, count jge .L27 #, negl %edx # tmp76 movslq %edx,%rdx # tmp76, tmp77 cmpq %rdx, %r13 # tmp77, count jg .L28 #, .L27: movq %rbx, %rdi # fbc, call _raw_spin_lock # addq %r13, 8(%rbx) # count, <variable>.count movq %rbx, %rdi # fbc, movl $0, (%r12) #,* tcp_ptr__ call _raw_spin_unlock # .L29: #APP # 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1 movq %gs:kernel_stack,%rax #, pfo_ret__ # 0 "" 2 #NO_APP decl -8124(%rax) # <variable>.preempt_count movq -8136(%rax), %rax #, D.14625 testb $8, %al #, D.14625 jne .L32 #, .L31: movq -24(%rbp), %rbx #, movq -16(%rbp), %r12 #, movq -8(%rbp), %r13 #, leave ret .p2align 4,,10 .p2align 3 .L28: movl %r13d, (%r12) # count,* jmp .L29 # .L32: call preempt_schedule # .p2align 4,,6 jmp .L31 # .size __percpu_counter_add, .-__percpu_counter_add .p2align 4,,15 Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:19 +00:00
dentry_stat.nr_dentry = get_nr_dentry();
dcache: convert dentry_stat.nr_unused to per-cpu counters Before we split up the dcache_lru_lock, the unused dentry counter needs to be made independent of the global dcache_lru_lock. Convert it to per-cpu counters to do this. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:54 +00:00
dentry_stat.nr_unused = get_nr_dentry_unused();
dentry_stat.nr_negative = get_nr_dentry_negative();
fs: bump inode and dentry counters to long This series reworks our current object cache shrinking infrastructure in two main ways: * Noticing that a lot of users copy and paste their own version of LRU lists for objects, we put some effort in providing a generic version. It is modeled after the filesystem users: dentries, inodes, and xfs (for various tasks), but we expect that other users could benefit in the near future with little or no modification. Let us know if you have any issues. * The underlying list_lru being proposed automatically and transparently keeps the elements in per-node lists, and is able to manipulate the node lists individually. Given this infrastructure, we are able to modify the up-to-now hammer called shrink_slab to proceed with node-reclaim instead of always searching memory from all over like it has been doing. Per-node lru lists are also expected to lead to less contention in the lru locks on multi-node scans, since we are now no longer fighting for a global lock. The locks usually disappear from the profilers with this change. Although we have no official benchmarks for this version - be our guest to independently evaluate this - earlier versions of this series were performance tested (details at http://permalink.gmane.org/gmane.linux.kernel.mm/100537) yielding no visible performance regressions while yielding a better qualitative behavior in NUMA machines. With this infrastructure in place, we can use the list_lru entry point to provide memcg isolation and per-memcg targeted reclaim. Historically, those two pieces of work have been posted together. This version presents only the infrastructure work, deferring the memcg work for a later time, so we can focus on getting this part tested. You can see more about the history of such work at http://lwn.net/Articles/552769/ Dave Chinner (18): dcache: convert dentry_stat.nr_unused to per-cpu counters dentry: move to per-sb LRU locks dcache: remove dentries from LRU before putting on dispose list mm: new shrinker API shrinker: convert superblock shrinkers to new API list: add a new LRU list type inode: convert inode lru list to generic lru list code. dcache: convert to use new lru list infrastructure list_lru: per-node list infrastructure shrinker: add node awareness fs: convert inode and dentry shrinking to be node aware xfs: convert buftarg LRU to generic code xfs: rework buffer dispose list tracking xfs: convert dquot cache lru to list_lru fs: convert fs shrinkers to new scan/count API drivers: convert shrinkers to new count/scan API shrinker: convert remaining shrinkers to count/scan API shrinker: Kill old ->shrink API. Glauber Costa (7): fs: bump inode and dentry counters to long super: fix calculation of shrinkable objects for small numbers list_lru: per-node API vmscan: per-node deferred work i915: bail out earlier when shrinker cannot acquire mutex hugepage: convert huge zero page shrinker to new shrinker API list_lru: dynamically adjust node arrays This patch: There are situations in very large machines in which we can have a large quantity of dirty inodes, unused dentries, etc. This is particularly true when umounting a filesystem, where eventually since every live object will eventually be discarded. Dave Chinner reported a problem with this while experimenting with the shrinker revamp patchset. So we believe it is time for a change. This patch just moves int to longs. Machines where it matters should have a big long anyway. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <dchinner@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:53 +00:00
return proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
}
#endif
/*
* Compare 2 name strings, return 0 if they match, otherwise non-zero.
* The strings are both count bytes long, and count is non-zero.
*/
#ifdef CONFIG_DCACHE_WORD_ACCESS
#include <asm/word-at-a-time.h>
/*
* NOTE! 'cs' and 'scount' come from a dentry, so it has a
* aligned allocation for this particular component. We don't
* strictly need the load_unaligned_zeropad() safety, but it
* doesn't hurt either.
*
* In contrast, 'ct' and 'tcount' can be from a pathname, and do
* need the careful unaligned handling.
*/
static inline int dentry_string_cmp(const unsigned char *cs, const unsigned char *ct, unsigned tcount)
{
unsigned long a,b,mask;
for (;;) {
a = read_word_at_a_time(cs);
b = load_unaligned_zeropad(ct);
if (tcount < sizeof(unsigned long))
break;
if (unlikely(a != b))
return 1;
cs += sizeof(unsigned long);
ct += sizeof(unsigned long);
tcount -= sizeof(unsigned long);
if (!tcount)
return 0;
}
mask = bytemask_from_count(tcount);
return unlikely(!!((a ^ b) & mask));
}
#else
static inline int dentry_string_cmp(const unsigned char *cs, const unsigned char *ct, unsigned tcount)
{
do {
if (*cs != *ct)
return 1;
cs++;
ct++;
tcount--;
} while (tcount);
return 0;
}
#endif
static inline int dentry_cmp(const struct dentry *dentry, const unsigned char *ct, unsigned tcount)
{
/*
* Be careful about RCU walk racing with rename:
* use 'READ_ONCE' to fetch the name pointer.
*
* NOTE! Even if a rename will mean that the length
* was not loaded atomically, we don't care. The
* RCU walk will check the sequence count eventually,
* and catch it. And we won't overrun the buffer,
* because we're reading the name pointer atomically,
* and a dentry name is guaranteed to be properly
* terminated with a NUL byte.
*
* End result: even if 'len' is wrong, we'll exit
* early because the data cannot match (there can
* be no NUL in the ct/tcount data)
*/
const unsigned char *cs = READ_ONCE(dentry->d_name.name);
2012-05-21 23:14:04 +00:00
return dentry_string_cmp(cs, ct, tcount);
}
Allow sharing external names after __d_move() * external dentry names get a small structure prepended to them (struct external_name). * it contains an atomic refcount, matching the number of struct dentry instances that have ->d_name.name pointing to that external name. The first thing free_dentry() does is decrementing refcount of external name, so the instances that are between the call of free_dentry() and RCU-delayed actual freeing do not contribute. * __d_move(x, y, false) makes the name of x equal to the name of y, external or not. If y has an external name, extra reference is grabbed and put into x->d_name.name. If x used to have an external name, the reference to the old name is dropped and, should it reach zero, freeing is scheduled via kfree_rcu(). * free_dentry() in dentry with external name decrements the refcount of that name and, should it reach zero, does RCU-delayed call that will free both the dentry and external name. Otherwise it does what it used to do, except that __d_free() doesn't even look at ->d_name.name; it simply frees the dentry. All non-RCU accesses to dentry external name are safe wrt freeing since they all should happen before free_dentry() is called. RCU accesses might run into a dentry seen by free_dentry() or into an old name that got already dropped by __d_move(); however, in both cases dentry must have been alive and refer to that name at some point after we'd done rcu_read_lock(), which means that any freeing must be still pending. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-29 18:54:27 +00:00
struct external_name {
union {
atomic_t count;
struct rcu_head head;
} u;
unsigned char name[];
};
static inline struct external_name *external_name(struct dentry *dentry)
{
return container_of(dentry->d_name.name, struct external_name, name[0]);
}
static void __d_free(struct rcu_head *head)
{
struct dentry *dentry = container_of(head, struct dentry, d_u.d_rcu);
Allow sharing external names after __d_move() * external dentry names get a small structure prepended to them (struct external_name). * it contains an atomic refcount, matching the number of struct dentry instances that have ->d_name.name pointing to that external name. The first thing free_dentry() does is decrementing refcount of external name, so the instances that are between the call of free_dentry() and RCU-delayed actual freeing do not contribute. * __d_move(x, y, false) makes the name of x equal to the name of y, external or not. If y has an external name, extra reference is grabbed and put into x->d_name.name. If x used to have an external name, the reference to the old name is dropped and, should it reach zero, freeing is scheduled via kfree_rcu(). * free_dentry() in dentry with external name decrements the refcount of that name and, should it reach zero, does RCU-delayed call that will free both the dentry and external name. Otherwise it does what it used to do, except that __d_free() doesn't even look at ->d_name.name; it simply frees the dentry. All non-RCU accesses to dentry external name are safe wrt freeing since they all should happen before free_dentry() is called. RCU accesses might run into a dentry seen by free_dentry() or into an old name that got already dropped by __d_move(); however, in both cases dentry must have been alive and refer to that name at some point after we'd done rcu_read_lock(), which means that any freeing must be still pending. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-29 18:54:27 +00:00
kmem_cache_free(dentry_cache, dentry);
}
static void __d_free_external(struct rcu_head *head)
{
struct dentry *dentry = container_of(head, struct dentry, d_u.d_rcu);
kfree(external_name(dentry));
dcache: account external names as indirectly reclaimable memory I received a report about suspicious growth of unreclaimable slabs on some machines. I've found that it happens on machines with low memory pressure, and these unreclaimable slabs are external names attached to dentries. External names are allocated using generic kmalloc() function, so they are accounted as unreclaimable. But they are held by dentries, which are reclaimable, and they will be reclaimed under the memory pressure. In particular, this breaks MemAvailable calculation, as it doesn't take unreclaimable slabs into account. This leads to a silly situation, when a machine is almost idle, has no memory pressure and therefore has a big dentry cache. And the resulting MemAvailable is too low to start a new workload. To address the issue, the NR_INDIRECTLY_RECLAIMABLE_BYTES counter is used to track the amount of memory, consumed by external names. The counter is increased in the dentry allocation path, if an external name structure is allocated; and it's decreased in the dentry freeing path. To reproduce the problem I've used the following Python script: import os for iter in range (0, 10000000): try: name = ("/some_long_name_%d" % iter) + "_" * 220 os.stat(name) except Exception: pass Without this patch: $ cat /proc/meminfo | grep MemAvailable MemAvailable: 7811688 kB $ python indirect.py $ cat /proc/meminfo | grep MemAvailable MemAvailable: 2753052 kB With the patch: $ cat /proc/meminfo | grep MemAvailable MemAvailable: 7809516 kB $ python indirect.py $ cat /proc/meminfo | grep MemAvailable MemAvailable: 7749144 kB [guro@fb.com: fix indirectly reclaimable memory accounting for CONFIG_SLOB] Link: http://lkml.kernel.org/r/20180312194140.19517-1-guro@fb.com [guro@fb.com: fix indirectly reclaimable memory accounting] Link: http://lkml.kernel.org/r/20180313125701.7955-1-guro@fb.com Link: http://lkml.kernel.org/r/20180305133743.12746-5-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:27:44 +00:00
kmem_cache_free(dentry_cache, dentry);
}
static inline int dname_external(const struct dentry *dentry)
{
return dentry->d_name.name != dentry->d_iname;
}
void take_dentry_name_snapshot(struct name_snapshot *name, struct dentry *dentry)
{
spin_lock(&dentry->d_lock);
name->name = dentry->d_name;
if (unlikely(dname_external(dentry))) {
atomic_inc(&external_name(dentry)->u.count);
} else {
fs/dcache.c: fix kmemcheck splat at take_dentry_name_snapshot() Since only dentry->d_name.len + 1 bytes out of DNAME_INLINE_LEN bytes are initialized at __d_alloc(), we can't copy the whole size unconditionally. WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff8fa27465ac50) 636f6e66696766732e746d70000000000010000000000000020000000188ffff i i i i i i i i i i i i i u u u u u u u u u u i i i i i u u u u ^ RIP: 0010:take_dentry_name_snapshot+0x28/0x50 RSP: 0018:ffffa83000f5bdf8 EFLAGS: 00010246 RAX: 0000000000000020 RBX: ffff8fa274b20550 RCX: 0000000000000002 RDX: ffffa83000f5be40 RSI: ffff8fa27465ac50 RDI: ffffa83000f5be60 RBP: ffffa83000f5bdf8 R08: ffffa83000f5be48 R09: 0000000000000001 R10: ffff8fa27465ac00 R11: ffff8fa27465acc0 R12: ffff8fa27465ac00 R13: ffff8fa27465acc0 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f79737ac8c0(0000) GS:ffffffff8fc30000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8fa274c0b000 CR3: 0000000134aa7002 CR4: 00000000000606f0 take_dentry_name_snapshot+0x28/0x50 vfs_rename+0x128/0x870 SyS_rename+0x3b2/0x3d0 entry_SYSCALL_64_fastpath+0x1a/0xa4 0xffffffffffffffff Link: http://lkml.kernel.org/r/201709131912.GBG39012.QMJLOVFSFFOOtH@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:44:34 +00:00
memcpy(name->inline_name, dentry->d_iname,
dentry->d_name.len + 1);
name->name.name = name->inline_name;
}
spin_unlock(&dentry->d_lock);
}
EXPORT_SYMBOL(take_dentry_name_snapshot);
void release_dentry_name_snapshot(struct name_snapshot *name)
{
if (unlikely(name->name.name != name->inline_name)) {
struct external_name *p;
p = container_of(name->name.name, struct external_name, name[0]);
if (unlikely(atomic_dec_and_test(&p->u.count)))
kfree_rcu(p, u.head);
}
}
EXPORT_SYMBOL(release_dentry_name_snapshot);
static inline void __d_set_inode_and_type(struct dentry *dentry,
struct inode *inode,
unsigned type_flags)
{
unsigned flags;
dentry->d_inode = inode;
flags = READ_ONCE(dentry->d_flags);
flags &= ~(DCACHE_ENTRY_TYPE | DCACHE_FALLTHRU);
flags |= type_flags;
fs/namei.c: fix missing barriers when checking positivity Pinned negative dentries can, generally, be made positive by another thread. Conditions that prevent that are * ->d_lock on dentry in question * parent directory held at least shared * nobody else could have observed the address of dentry Most of the places working with those fall into one of those categories; however, d_lookup() and friends need to be used with some care. Fortunately, there's not a lot of call sites, and with few exceptions all of those fall under one of the cases above. Exceptions are all in fs/namei.c - in lookup_fast(), lookup_dcache() and mountpoint_last(). Another one is lookup_slow() - there dcache lookup is done with parent held shared, but the result is used after we'd drop the lock. The same happens in do_last() - the lookup (in lookup_one()) is done with parent locked, but result is used after unlocking. lookup_fast(), do_last() and mountpoint_last() flat-out reject negatives. Most of lookup_dcache() calls are made with parent locked at least shared; the only exception is lookup_one_len_unlocked(). It might return pinned negative, needs serious care from callers. Fortunately, almost nobody calls it directly anymore; all but two callers have converted to lookup_positive_unlocked(), which rejects negatives. lookup_slow() is called by the same lookup_one_len_unlocked() (see above), mountpoint_last() and walk_component(). In those two negatives are rejected. In other words, there is a small set of places where we need to check carefully if a pinned potentially negative dentry is, in fact, positive. After that check we want to be sure that both ->d_inode and type bits in ->d_flags are stable and observed. The set consists of follow_managed() (where the rejection happens for lookup_fast(), walk_component() and do_last()), last_mountpoint() and lookup_positive_unlocked(). Solution: 1) transition from negative to positive (in __d_set_inode_and_type()) stores ->d_inode, then uses smp_store_release() to set ->d_flags type bits. 2) aforementioned 3 places in fs/namei.c fetch ->d_flags with smp_load_acquire() and bugger off if it type bits say "negative". That way anyone downstream of those checks has dentry know positive pinned, with ->d_inode and type bits of ->d_flags stable and observed. I considered splitting off d_lookup_positive(), so that the checks could be done right there, under ->d_lock. However, that leads to massive duplication of rather subtle code in fs/namei.c and fs/dcache.c. It's worse than it might seem, thanks to autofs ->d_manage() getting involved ;-/ No matter what, autofs_d_manage()/autofs_d_automount() must live with the possibility of pinned negative dentry passed their way, becoming positive under them - that's the intended behaviour when lookup comes in the middle of automount in progress, so we can't keep them out of the area that has to deal with those, more's the pity... Reported-by: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-11-12 21:13:06 +00:00
smp_store_release(&dentry->d_flags, flags);
}
static inline void __d_clear_type_and_inode(struct dentry *dentry)
{
unsigned flags = READ_ONCE(dentry->d_flags);
flags &= ~(DCACHE_ENTRY_TYPE | DCACHE_FALLTHRU);
WRITE_ONCE(dentry->d_flags, flags);
dentry->d_inode = NULL;
if (dentry->d_flags & DCACHE_LRU_LIST)
this_cpu_inc(nr_dentry_negative);
}
static void dentry_free(struct dentry *dentry)
{
WARN_ON(!hlist_unhashed(&dentry->d_u.d_alias));
Allow sharing external names after __d_move() * external dentry names get a small structure prepended to them (struct external_name). * it contains an atomic refcount, matching the number of struct dentry instances that have ->d_name.name pointing to that external name. The first thing free_dentry() does is decrementing refcount of external name, so the instances that are between the call of free_dentry() and RCU-delayed actual freeing do not contribute. * __d_move(x, y, false) makes the name of x equal to the name of y, external or not. If y has an external name, extra reference is grabbed and put into x->d_name.name. If x used to have an external name, the reference to the old name is dropped and, should it reach zero, freeing is scheduled via kfree_rcu(). * free_dentry() in dentry with external name decrements the refcount of that name and, should it reach zero, does RCU-delayed call that will free both the dentry and external name. Otherwise it does what it used to do, except that __d_free() doesn't even look at ->d_name.name; it simply frees the dentry. All non-RCU accesses to dentry external name are safe wrt freeing since they all should happen before free_dentry() is called. RCU accesses might run into a dentry seen by free_dentry() or into an old name that got already dropped by __d_move(); however, in both cases dentry must have been alive and refer to that name at some point after we'd done rcu_read_lock(), which means that any freeing must be still pending. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-29 18:54:27 +00:00
if (unlikely(dname_external(dentry))) {
struct external_name *p = external_name(dentry);
if (likely(atomic_dec_and_test(&p->u.count))) {
call_rcu(&dentry->d_u.d_rcu, __d_free_external);
return;
}
}
/* if dentry was never visible to RCU, immediate free is OK */
dcache: sort the freeing-without-RCU-delay mess for good. For lockless accesses to dentries we don't have pinned we rely (among other things) upon having an RCU delay between dropping the last reference and actually freeing the memory. On the other hand, for things like pipes and sockets we neither do that kind of lockless access, nor want to deal with the overhead of an RCU delay every time a socket gets closed. So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags made sure it would happen. We tried to avoid setting it unless we knew we need it. Unfortunately, that had led to recurring class of bugs, in which we missed the need to set it. We only really need it for dentries that are created by d_alloc_pseudo(), so let's not bother with trying to be smart - just make having an RCU delay the default. The ones that do *not* get it set the replacement flag (DCACHE_NORCU) and we'd better use that sparingly. d_alloc_pseudo() is the only such user right now. FWIW, the race that finally prompted that switch had been between __lock_parent() of immediate subdirectory of what's currently the root of a disconnected tree (e.g. from open-by-handle in progress) racing with d_splice_alias() elsewhere picking another alias for the same inode, either on outright corrupted fs image, or (in case of open-by-handle on NFS) that subdirectory having been just moved on server. It's not easy to hit, so the sky is not falling, but that's not the first race on similar missed cases and the logics for settinf DCACHE_RCUACCESS has gotten ridiculously convoluted. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-16 02:23:19 +00:00
if (dentry->d_flags & DCACHE_NORCU)
__d_free(&dentry->d_u.d_rcu);
else
call_rcu(&dentry->d_u.d_rcu, __d_free);
}
/*
* Release the dentry's inode, using the filesystem
* d_iput() operation if defined.
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
*/
static void dentry_unlink_inode(struct dentry * dentry)
__releases(dentry->d_lock)
__releases(dentry->d_inode->i_lock)
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
{
struct inode *inode = dentry->d_inode;
raw_write_seqcount_begin(&dentry->d_seq);
__d_clear_type_and_inode(dentry);
hlist_del_init(&dentry->d_u.d_alias);
raw_write_seqcount_end(&dentry->d_seq);
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
spin_unlock(&dentry->d_lock);
spin_unlock(&inode->i_lock);
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
if (!inode->i_nlink)
fsnotify_inoderemove(inode);
if (dentry->d_op && dentry->d_op->d_iput)
dentry->d_op->d_iput(dentry, inode);
else
iput(inode);
}
/*
* The DCACHE_LRU_LIST bit is set whenever the 'd_lru' entry
* is in use - which includes both the "real" per-superblock
* LRU list _and_ the DCACHE_SHRINK_LIST use.
*
* The DCACHE_SHRINK_LIST bit is set whenever the dentry is
* on the shrink list (ie not on the superblock LRU list).
*
* The per-cpu "nr_dentry_unused" counters are updated with
* the DCACHE_LRU_LIST bit.
*
* The per-cpu "nr_dentry_negative" counters are only updated
* when deleted from or added to the per-superblock LRU list, not
* from/to the shrink list. That is to avoid an unneeded dec/inc
* pair when moving from LRU to shrink list in select_collect().
*
* These helper functions make sure we always follow the
* rules. d_lock must be held by the caller.
*/
#define D_FLAG_VERIFY(dentry,x) WARN_ON_ONCE(((dentry)->d_flags & (DCACHE_LRU_LIST | DCACHE_SHRINK_LIST)) != (x))
static void d_lru_add(struct dentry *dentry)
{
D_FLAG_VERIFY(dentry, 0);
dentry->d_flags |= DCACHE_LRU_LIST;
this_cpu_inc(nr_dentry_unused);
if (d_is_negative(dentry))
this_cpu_inc(nr_dentry_negative);
WARN_ON_ONCE(!list_lru_add(&dentry->d_sb->s_dentry_lru, &dentry->d_lru));
}
static void d_lru_del(struct dentry *dentry)
{
D_FLAG_VERIFY(dentry, DCACHE_LRU_LIST);
dentry->d_flags &= ~DCACHE_LRU_LIST;
this_cpu_dec(nr_dentry_unused);
if (d_is_negative(dentry))
this_cpu_dec(nr_dentry_negative);
WARN_ON_ONCE(!list_lru_del(&dentry->d_sb->s_dentry_lru, &dentry->d_lru));
}
static void d_shrink_del(struct dentry *dentry)
{
D_FLAG_VERIFY(dentry, DCACHE_SHRINK_LIST | DCACHE_LRU_LIST);
list_del_init(&dentry->d_lru);
dentry->d_flags &= ~(DCACHE_SHRINK_LIST | DCACHE_LRU_LIST);
this_cpu_dec(nr_dentry_unused);
}
static void d_shrink_add(struct dentry *dentry, struct list_head *list)
{
D_FLAG_VERIFY(dentry, 0);
list_add(&dentry->d_lru, list);
dentry->d_flags |= DCACHE_SHRINK_LIST | DCACHE_LRU_LIST;
this_cpu_inc(nr_dentry_unused);
}
/*
* These can only be called under the global LRU lock, ie during the
* callback for freeing the LRU list. "isolate" removes it from the
* LRU lists entirely, while shrink_move moves it to the indicated
* private list.
*/
list_lru: add helpers to isolate items Currently, the isolate callback passed to the list_lru_walk family of functions is supposed to just delete an item from the list upon returning LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by __list_lru_walk_one after the callback returns. Since the callback is allowed to drop the lock after removing an item (it has to return LRU_REMOVED_RETRY then), the nr_items can be less than the actual number of elements on the list even if we check them under the lock. This makes it difficult to move items from one list_lru_one to another, which is required for per-memcg list_lru reparenting - we can't just splice the lists, we have to move entries one by one. This patch therefore introduces helpers that must be used by callback functions to isolate items instead of raw list_del/list_move. These are list_lru_isolate and list_lru_isolate_move. They not only remove the entry from the list, but also fix the nr_items counter, making sure nr_items always reflects the actual number of elements on the list if checked under the appropriate lock. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:59:35 +00:00
static void d_lru_isolate(struct list_lru_one *lru, struct dentry *dentry)
{
D_FLAG_VERIFY(dentry, DCACHE_LRU_LIST);
dentry->d_flags &= ~DCACHE_LRU_LIST;
this_cpu_dec(nr_dentry_unused);
if (d_is_negative(dentry))
this_cpu_dec(nr_dentry_negative);
list_lru: add helpers to isolate items Currently, the isolate callback passed to the list_lru_walk family of functions is supposed to just delete an item from the list upon returning LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by __list_lru_walk_one after the callback returns. Since the callback is allowed to drop the lock after removing an item (it has to return LRU_REMOVED_RETRY then), the nr_items can be less than the actual number of elements on the list even if we check them under the lock. This makes it difficult to move items from one list_lru_one to another, which is required for per-memcg list_lru reparenting - we can't just splice the lists, we have to move entries one by one. This patch therefore introduces helpers that must be used by callback functions to isolate items instead of raw list_del/list_move. These are list_lru_isolate and list_lru_isolate_move. They not only remove the entry from the list, but also fix the nr_items counter, making sure nr_items always reflects the actual number of elements on the list if checked under the appropriate lock. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:59:35 +00:00
list_lru_isolate(lru, &dentry->d_lru);
}
list_lru: add helpers to isolate items Currently, the isolate callback passed to the list_lru_walk family of functions is supposed to just delete an item from the list upon returning LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by __list_lru_walk_one after the callback returns. Since the callback is allowed to drop the lock after removing an item (it has to return LRU_REMOVED_RETRY then), the nr_items can be less than the actual number of elements on the list even if we check them under the lock. This makes it difficult to move items from one list_lru_one to another, which is required for per-memcg list_lru reparenting - we can't just splice the lists, we have to move entries one by one. This patch therefore introduces helpers that must be used by callback functions to isolate items instead of raw list_del/list_move. These are list_lru_isolate and list_lru_isolate_move. They not only remove the entry from the list, but also fix the nr_items counter, making sure nr_items always reflects the actual number of elements on the list if checked under the appropriate lock. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:59:35 +00:00
static void d_lru_shrink_move(struct list_lru_one *lru, struct dentry *dentry,
struct list_head *list)
{
D_FLAG_VERIFY(dentry, DCACHE_LRU_LIST);
dentry->d_flags |= DCACHE_SHRINK_LIST;
if (d_is_negative(dentry))
this_cpu_dec(nr_dentry_negative);
list_lru: add helpers to isolate items Currently, the isolate callback passed to the list_lru_walk family of functions is supposed to just delete an item from the list upon returning LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by __list_lru_walk_one after the callback returns. Since the callback is allowed to drop the lock after removing an item (it has to return LRU_REMOVED_RETRY then), the nr_items can be less than the actual number of elements on the list even if we check them under the lock. This makes it difficult to move items from one list_lru_one to another, which is required for per-memcg list_lru reparenting - we can't just splice the lists, we have to move entries one by one. This patch therefore introduces helpers that must be used by callback functions to isolate items instead of raw list_del/list_move. These are list_lru_isolate and list_lru_isolate_move. They not only remove the entry from the list, but also fix the nr_items counter, making sure nr_items always reflects the actual number of elements on the list if checked under the appropriate lock. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:59:35 +00:00
list_lru_isolate_move(lru, &dentry->d_lru, list);
}
/**
* d_drop - drop a dentry
* @dentry: dentry to drop
*
* d_drop() unhashes the entry from the parent dentry hashes, so that it won't
* be found through a VFS lookup any more. Note that this is different from
* deleting the dentry - d_delete will try to mark the dentry negative if
* possible, giving a successful _negative_ lookup, while d_drop will
* just make the cache lookup fail.
*
* d_drop() is used mainly for stuff that wants to invalidate a dentry for some
* reason (NFS timeouts or autofs deletes).
*
* __d_drop requires dentry->d_lock
* ___d_drop doesn't mark dentry as "unhashed"
* (dentry->d_hash.pprev will be LIST_POISON2, not NULL).
*/
static void ___d_drop(struct dentry *dentry)
{
struct hlist_bl_head *b;
/*
* Hashed dentries are normally on the dentry hashtable,
* with the exception of those newly allocated by
* d_obtain_root, which are always IS_ROOT:
*/
if (unlikely(IS_ROOT(dentry)))
b = &dentry->d_sb->s_roots;
else
b = d_hash(dentry->d_name.hash);
hlist_bl_lock(b);
__hlist_bl_del(&dentry->d_hash);
hlist_bl_unlock(b);
}
void __d_drop(struct dentry *dentry)
{
if (!d_unhashed(dentry)) {
___d_drop(dentry);
dentry->d_hash.pprev = NULL;
write_seqcount_invalidate(&dentry->d_seq);
}
}
EXPORT_SYMBOL(__d_drop);
void d_drop(struct dentry *dentry)
{
spin_lock(&dentry->d_lock);
__d_drop(dentry);
spin_unlock(&dentry->d_lock);
}
EXPORT_SYMBOL(d_drop);
static inline void dentry_unlist(struct dentry *dentry, struct dentry *parent)
{
struct dentry *next;
/*
* Inform d_walk() and shrink_dentry_list() that we are no longer
* attached to the dentry tree
*/
dentry->d_flags |= DCACHE_DENTRY_KILLED;
if (unlikely(list_empty(&dentry->d_child)))
return;
__list_del_entry(&dentry->d_child);
/*
* Cursors can move around the list of children. While we'd been
* a normal list member, it didn't matter - ->d_child.next would've
* been updated. However, from now on it won't be and for the
* things like d_walk() it might end up with a nasty surprise.
* Normally d_walk() doesn't care about cursors moving around -
* ->d_lock on parent prevents that and since a cursor has no children
* of its own, we get through it without ever unlocking the parent.
* There is one exception, though - if we ascend from a child that
* gets killed as soon as we unlock it, the next sibling is found
* using the value left in its ->d_child.next. And if _that_
* pointed to a cursor, and cursor got moved (e.g. by lseek())
* before d_walk() regains parent->d_lock, we'll end up skipping
* everything the cursor had been moved past.
*
* Solution: make sure that the pointer left behind in ->d_child.next
* points to something that won't be moving around. I.e. skip the
* cursors.
*/
while (dentry->d_child.next != &parent->d_subdirs) {
next = list_entry(dentry->d_child.next, struct dentry, d_child);
if (likely(!(next->d_flags & DCACHE_DENTRY_CURSOR)))
break;
dentry->d_child.next = next->d_child.next;
}
}
static void __dentry_kill(struct dentry *dentry)
{
struct dentry *parent = NULL;
bool can_free = true;
if (!IS_ROOT(dentry))
parent = dentry->d_parent;
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
vfs: use lockred "dead" flag to mark unrecoverably dead dentries This simplifies the RCU to refcounting code in particular. I was originally intending to leave this for later, but walking through all the dput() logic (see previous commit), I realized that the dput() "might_sleep()" check was misleadingly weak. And I removed it as misleading, both for performance profiling and for debugging. However, the might_sleep() debugging case is actually true: the final dput() can indeed sleep, if the inode of the dentry that you are releasing ends up sleeping at iput time (see dentry_iput()). So the problem with the might_sleep() in dput() wasn't that it wasn't true, it was that it wasn't actually testing and triggering on the interesting case. In particular, just about *any* dput() can indeed sleep, if you happen to race with another thread deleting the file in question, and you then lose the race to the be the last dput() for that file. But because it's a very rare race, the debugging code would never trigger it in practice. Why is this problematic? The new d_rcu_to_refcount() (see commit 15570086b590: "vfs: reimplement d_rcu_to_refcount() using lockref_get_or_lock()") does a dput() for the failure case, and it does it under the RCU lock. So potentially sleeping really is a bug. But there's no way I'm going to fix this with the previous complicated "lockref_get_or_lock()" interface. And rather than revert to the old and crufty nested dentry locking code (which did get this right by delaying the reference count updates until they were verified to be safe), let's make forward progress. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-08 20:46:52 +00:00
/*
* The dentry is now unrecoverably dead to the world.
*/
lockref_mark_dead(&dentry->d_lockref);
/*
* inform the fs via d_prune that this dentry is about to be
* unhashed and destroyed.
*/
if (dentry->d_flags & DCACHE_OP_PRUNE)
dentry->d_op->d_prune(dentry);
if (dentry->d_flags & DCACHE_LRU_LIST) {
if (!(dentry->d_flags & DCACHE_SHRINK_LIST))
d_lru_del(dentry);
}
/* if it was on the hash then remove it */
__d_drop(dentry);
dentry_unlist(dentry, parent);
if (parent)
spin_unlock(&parent->d_lock);
if (dentry->d_inode)
dentry_unlink_inode(dentry);
else
spin_unlock(&dentry->d_lock);
this_cpu_dec(nr_dentry);
if (dentry->d_op && dentry->d_op->d_release)
dentry->d_op->d_release(dentry);
spin_lock(&dentry->d_lock);
if (dentry->d_flags & DCACHE_SHRINK_LIST) {
dentry->d_flags |= DCACHE_MAY_FREE;
can_free = false;
}
spin_unlock(&dentry->d_lock);
if (likely(can_free))
dentry_free(dentry);
cond_resched();
}
static struct dentry *__lock_parent(struct dentry *dentry)
shrink_dentry_list(): take parent's ->d_lock earlier The cause of livelocks there is that we are taking ->d_lock on dentry and its parent in the wrong order, forcing us to use trylock on the parent's one. d_walk() takes them in the right order, and unfortunately it's not hard to create a situation when shrink_dentry_list() can't make progress since trylock keeps failing, and shrink_dcache_parent() or check_submounts_and_drop() keeps calling d_walk() disrupting the very shrink_dentry_list() it's waiting for. Solution is straightforward - if that trylock fails, let's unlock the dentry itself and take locks in the right order. We need to stabilize ->d_parent without holding ->d_lock, but that's doable using RCU. And we'd better do that in the very beginning of the loop in shrink_dentry_list(), since the checks on refcount, etc. would need to be redone anyway. That deals with a half of the problem - killing dentries on the shrink list itself. Another one (dropping their parents) is in the next commit. locking parent is interesting - it would be easy to do rcu_read_lock(), lock whatever we think is a parent, lock dentry itself and check if the parent is still the right one. Except that we need to check that *before* locking the dentry, or we are risking taking ->d_lock out of order. Fortunately, once the D1 is locked, we can check if D2->d_parent is equal to D1 without the need to lock D2; D2->d_parent can start or stop pointing to D1 only under D1->d_lock, so taking D1->d_lock is enough. In other words, the right solution is rcu_read_lock/lock what looks like parent right now/check if it's still our parent/rcu_read_unlock/lock the child. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-29 12:54:52 +00:00
{
struct dentry *parent;
shrink_dentry_list(): take parent's ->d_lock earlier The cause of livelocks there is that we are taking ->d_lock on dentry and its parent in the wrong order, forcing us to use trylock on the parent's one. d_walk() takes them in the right order, and unfortunately it's not hard to create a situation when shrink_dentry_list() can't make progress since trylock keeps failing, and shrink_dcache_parent() or check_submounts_and_drop() keeps calling d_walk() disrupting the very shrink_dentry_list() it's waiting for. Solution is straightforward - if that trylock fails, let's unlock the dentry itself and take locks in the right order. We need to stabilize ->d_parent without holding ->d_lock, but that's doable using RCU. And we'd better do that in the very beginning of the loop in shrink_dentry_list(), since the checks on refcount, etc. would need to be redone anyway. That deals with a half of the problem - killing dentries on the shrink list itself. Another one (dropping their parents) is in the next commit. locking parent is interesting - it would be easy to do rcu_read_lock(), lock whatever we think is a parent, lock dentry itself and check if the parent is still the right one. Except that we need to check that *before* locking the dentry, or we are risking taking ->d_lock out of order. Fortunately, once the D1 is locked, we can check if D2->d_parent is equal to D1 without the need to lock D2; D2->d_parent can start or stop pointing to D1 only under D1->d_lock, so taking D1->d_lock is enough. In other words, the right solution is rcu_read_lock/lock what looks like parent right now/check if it's still our parent/rcu_read_unlock/lock the child. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-29 12:54:52 +00:00
rcu_read_lock();
spin_unlock(&dentry->d_lock);
shrink_dentry_list(): take parent's ->d_lock earlier The cause of livelocks there is that we are taking ->d_lock on dentry and its parent in the wrong order, forcing us to use trylock on the parent's one. d_walk() takes them in the right order, and unfortunately it's not hard to create a situation when shrink_dentry_list() can't make progress since trylock keeps failing, and shrink_dcache_parent() or check_submounts_and_drop() keeps calling d_walk() disrupting the very shrink_dentry_list() it's waiting for. Solution is straightforward - if that trylock fails, let's unlock the dentry itself and take locks in the right order. We need to stabilize ->d_parent without holding ->d_lock, but that's doable using RCU. And we'd better do that in the very beginning of the loop in shrink_dentry_list(), since the checks on refcount, etc. would need to be redone anyway. That deals with a half of the problem - killing dentries on the shrink list itself. Another one (dropping their parents) is in the next commit. locking parent is interesting - it would be easy to do rcu_read_lock(), lock whatever we think is a parent, lock dentry itself and check if the parent is still the right one. Except that we need to check that *before* locking the dentry, or we are risking taking ->d_lock out of order. Fortunately, once the D1 is locked, we can check if D2->d_parent is equal to D1 without the need to lock D2; D2->d_parent can start or stop pointing to D1 only under D1->d_lock, so taking D1->d_lock is enough. In other words, the right solution is rcu_read_lock/lock what looks like parent right now/check if it's still our parent/rcu_read_unlock/lock the child. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-29 12:54:52 +00:00
again:
locking/atomics, fs/dcache: Convert ACCESS_ONCE() to READ_ONCE()/WRITE_ONCE() For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the dcache code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-4-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 21:07:14 +00:00
parent = READ_ONCE(dentry->d_parent);
shrink_dentry_list(): take parent's ->d_lock earlier The cause of livelocks there is that we are taking ->d_lock on dentry and its parent in the wrong order, forcing us to use trylock on the parent's one. d_walk() takes them in the right order, and unfortunately it's not hard to create a situation when shrink_dentry_list() can't make progress since trylock keeps failing, and shrink_dcache_parent() or check_submounts_and_drop() keeps calling d_walk() disrupting the very shrink_dentry_list() it's waiting for. Solution is straightforward - if that trylock fails, let's unlock the dentry itself and take locks in the right order. We need to stabilize ->d_parent without holding ->d_lock, but that's doable using RCU. And we'd better do that in the very beginning of the loop in shrink_dentry_list(), since the checks on refcount, etc. would need to be redone anyway. That deals with a half of the problem - killing dentries on the shrink list itself. Another one (dropping their parents) is in the next commit. locking parent is interesting - it would be easy to do rcu_read_lock(), lock whatever we think is a parent, lock dentry itself and check if the parent is still the right one. Except that we need to check that *before* locking the dentry, or we are risking taking ->d_lock out of order. Fortunately, once the D1 is locked, we can check if D2->d_parent is equal to D1 without the need to lock D2; D2->d_parent can start or stop pointing to D1 only under D1->d_lock, so taking D1->d_lock is enough. In other words, the right solution is rcu_read_lock/lock what looks like parent right now/check if it's still our parent/rcu_read_unlock/lock the child. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-29 12:54:52 +00:00
spin_lock(&parent->d_lock);
/*
* We can't blindly lock dentry until we are sure
* that we won't violate the locking order.
* Any changes of dentry->d_parent must have
* been done with parent->d_lock held, so
* spin_lock() above is enough of a barrier
* for checking if it's still our child.
*/
if (unlikely(parent != dentry->d_parent)) {
spin_unlock(&parent->d_lock);
goto again;
}
rcu_read_unlock();
if (parent != dentry)
spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
else
shrink_dentry_list(): take parent's ->d_lock earlier The cause of livelocks there is that we are taking ->d_lock on dentry and its parent in the wrong order, forcing us to use trylock on the parent's one. d_walk() takes them in the right order, and unfortunately it's not hard to create a situation when shrink_dentry_list() can't make progress since trylock keeps failing, and shrink_dcache_parent() or check_submounts_and_drop() keeps calling d_walk() disrupting the very shrink_dentry_list() it's waiting for. Solution is straightforward - if that trylock fails, let's unlock the dentry itself and take locks in the right order. We need to stabilize ->d_parent without holding ->d_lock, but that's doable using RCU. And we'd better do that in the very beginning of the loop in shrink_dentry_list(), since the checks on refcount, etc. would need to be redone anyway. That deals with a half of the problem - killing dentries on the shrink list itself. Another one (dropping their parents) is in the next commit. locking parent is interesting - it would be easy to do rcu_read_lock(), lock whatever we think is a parent, lock dentry itself and check if the parent is still the right one. Except that we need to check that *before* locking the dentry, or we are risking taking ->d_lock out of order. Fortunately, once the D1 is locked, we can check if D2->d_parent is equal to D1 without the need to lock D2; D2->d_parent can start or stop pointing to D1 only under D1->d_lock, so taking D1->d_lock is enough. In other words, the right solution is rcu_read_lock/lock what looks like parent right now/check if it's still our parent/rcu_read_unlock/lock the child. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-29 12:54:52 +00:00
parent = NULL;
return parent;
}
static inline struct dentry *lock_parent(struct dentry *dentry)
{
struct dentry *parent = dentry->d_parent;
if (IS_ROOT(dentry))
return NULL;
if (likely(spin_trylock(&parent->d_lock)))
return parent;
return __lock_parent(dentry);
}
static inline bool retain_dentry(struct dentry *dentry)
{
WARN_ON(d_in_lookup(dentry));
/* Unreachable? Get rid of it */
if (unlikely(d_unhashed(dentry)))
return false;
if (unlikely(dentry->d_flags & DCACHE_DISCONNECTED))
return false;
if (unlikely(dentry->d_flags & DCACHE_OP_DELETE)) {
if (dentry->d_op->d_delete(dentry))
return false;
}
if (unlikely(dentry->d_flags & DCACHE_DONTCACHE))
return false;
/* retain; LRU fodder */
dentry->d_lockref.count--;
if (unlikely(!(dentry->d_flags & DCACHE_LRU_LIST)))
d_lru_add(dentry);
else if (unlikely(!(dentry->d_flags & DCACHE_REFERENCED)))
dentry->d_flags |= DCACHE_REFERENCED;
return true;
}
void d_mark_dontcache(struct inode *inode)
{
struct dentry *de;
spin_lock(&inode->i_lock);
hlist_for_each_entry(de, &inode->i_dentry, d_u.d_alias) {
spin_lock(&de->d_lock);
de->d_flags |= DCACHE_DONTCACHE;
spin_unlock(&de->d_lock);
}
inode->i_state |= I_DONTCACHE;
spin_unlock(&inode->i_lock);
}
EXPORT_SYMBOL(d_mark_dontcache);
/*
* Finish off a dentry we've decided to kill.
* dentry->d_lock must be held, returns with it unlocked.
* Returns dentry requiring refcount drop, or NULL if we're done.
*/
static struct dentry *dentry_kill(struct dentry *dentry)
__releases(dentry->d_lock)
{
struct inode *inode = dentry->d_inode;
struct dentry *parent = NULL;
if (inode && unlikely(!spin_trylock(&inode->i_lock)))
goto slow_positive;
if (!IS_ROOT(dentry)) {
parent = dentry->d_parent;
if (unlikely(!spin_trylock(&parent->d_lock))) {
parent = __lock_parent(dentry);
if (likely(inode || !dentry->d_inode))
goto got_locks;
/* negative that became positive */
if (parent)
spin_unlock(&parent->d_lock);
inode = dentry->d_inode;
goto slow_positive;
}
}
__dentry_kill(dentry);
return parent;
slow_positive:
spin_unlock(&dentry->d_lock);
spin_lock(&inode->i_lock);
spin_lock(&dentry->d_lock);
parent = lock_parent(dentry);
got_locks:
if (unlikely(dentry->d_lockref.count != 1)) {
dentry->d_lockref.count--;
} else if (likely(!retain_dentry(dentry))) {
__dentry_kill(dentry);
return parent;
}
/* we are keeping it, after all */
if (inode)
spin_unlock(&inode->i_lock);
if (parent)
spin_unlock(&parent->d_lock);
spin_unlock(&dentry->d_lock);
return NULL;
}
/*
* Try to do a lockless dput(), and return whether that was successful.
*
* If unsuccessful, we return false, having already taken the dentry lock.
*
* The caller needs to hold the RCU read lock, so that the dentry is
* guaranteed to stay around even if the refcount goes down to zero!
*/
static inline bool fast_dput(struct dentry *dentry)
{
int ret;
unsigned int d_flags;
/*
* If we have a d_op->d_delete() operation, we sould not
freeing unlinked file indefinitely delayed Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-08 01:42:38 +00:00
* let the dentry count go to zero, so use "put_or_lock".
*/
if (unlikely(dentry->d_flags & DCACHE_OP_DELETE))
return lockref_put_or_lock(&dentry->d_lockref);
/*
* .. otherwise, we can try to just decrement the
* lockref optimistically.
*/
ret = lockref_put_return(&dentry->d_lockref);
/*
* If the lockref_put_return() failed due to the lock being held
* by somebody else, the fast path has failed. We will need to
* get the lock, and then check the count again.
*/
if (unlikely(ret < 0)) {
spin_lock(&dentry->d_lock);
if (dentry->d_lockref.count > 1) {
dentry->d_lockref.count--;
spin_unlock(&dentry->d_lock);
return true;
}
return false;
}
/*
* If we weren't the last ref, we're done.
*/
if (ret)
return true;
/*
* Careful, careful. The reference count went down
* to zero, but we don't hold the dentry lock, so
* somebody else could get it again, and do another
* dput(), and we need to not race with that.
*
* However, there is a very special and common case
* where we don't care, because there is nothing to
* do: the dentry is still hashed, it does not have
* a 'delete' op, and it's referenced and already on
* the LRU list.
*
* NOTE! Since we aren't locked, these values are
* not "stable". However, it is sufficient that at
* some point after we dropped the reference the
* dentry was hashed and the flags had the proper
* value. Other dentry users may have re-gotten
* a reference to the dentry and change that, but
* our work is done - we can leave the dentry
* around with a zero refcount.
*/
smp_rmb();
locking/atomics, fs/dcache: Convert ACCESS_ONCE() to READ_ONCE()/WRITE_ONCE() For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the dcache code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-4-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 21:07:14 +00:00
d_flags = READ_ONCE(dentry->d_flags);
freeing unlinked file indefinitely delayed Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-08 01:42:38 +00:00
d_flags &= DCACHE_REFERENCED | DCACHE_LRU_LIST | DCACHE_DISCONNECTED;
/* Nothing to do? Dropping the reference was all we needed? */
if (d_flags == (DCACHE_REFERENCED | DCACHE_LRU_LIST) && !d_unhashed(dentry))
return true;
/*
* Not the fast normal case? Get the lock. We've already decremented
* the refcount, but we'll need to re-check the situation after
* getting the lock.
*/
spin_lock(&dentry->d_lock);
/*
* Did somebody else grab a reference to it in the meantime, and
* we're no longer the last user after all? Alternatively, somebody
* else could have killed it and marked it dead. Either way, we
* don't need to do anything else.
*/
if (dentry->d_lockref.count) {
spin_unlock(&dentry->d_lock);
return true;
}
/*
* Re-get the reference we optimistically dropped. We hold the
* lock, and we just tested that it was zero, so we can just
* set it to 1.
*/
dentry->d_lockref.count = 1;
return false;
}
/*
* This is dput
*
* This is complicated by the fact that we do not want to put
* dentries that are no longer on any hash chain on the unused
* list: we'd much rather just get rid of them immediately.
*
* However, that implies that we have to traverse the dentry
* tree upwards to the parents which might _also_ now be
* scheduled for deletion (it may have been only waiting for
* its last child to go away).
*
* This tail recursion is done by hand as we don't want to depend
* on the compiler to always get this right (gcc generally doesn't).
* Real recursion would eat up our stack space.
*/
/*
* dput - release a dentry
* @dentry: dentry to release
*
* Release a dentry. This will drop the usage count and if appropriate
* call the dentry unlink method as well as removing it from the queues and
* releasing its resources. If the parent dentries were scheduled for release
* they too may now get deleted.
*/
void dput(struct dentry *dentry)
{
while (dentry) {
might_sleep();
rcu_read_lock();
if (likely(fast_dput(dentry))) {
rcu_read_unlock();
return;
}
/* Slow case: now with the dentry lock held */
rcu_read_unlock();
if (likely(retain_dentry(dentry))) {
spin_unlock(&dentry->d_lock);
return;
}
dentry = dentry_kill(dentry);
}
}
EXPORT_SYMBOL(dput);
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists Currently, running into a shrink list that contains dentries from different filesystems can cause several unpleasant things for shrink_dcache_parent() and for umount(2). The first problem is that there's a window during shrink_dentry_list() between __dentry_kill() takes a victim out and dropping reference to its parent. During that window the parent looks like a genuine busy dentry. shrink_dcache_parent() (or, worse yet, shrink_dcache_for_umount()) coming at that time will see no eviction candidates and no indication that it needs to wait for some shrink_dentry_list() to proceed further. That applies for any shrink list that might intersect with the subtree we are trying to shrink; the only reason it does not blow on umount(2) in the mainline is that we unregister the memory shrinker before hitting shrink_dcache_for_umount(). Another problem happens if something in a mixed-filesystem shrink list gets be stuck in e.g. iput(), getting umount of unrelated fs to spin waiting for the stuck shrinker to get around to our dentries. Solution: 1) have shrink_dentry_list() decrement the parent's refcount and make sure it's on a shrink list (ours unless it already had been on some other) before calling __dentry_kill(). That eliminates the window when shrink_dcache_parent() would've blown past the entire subtree without noticing anything with zero refcount not on shrink lists. 2) when shrink_dcache_parent() has found no eviction candidates, but some dentries are still sitting on shrink lists, rather than repeating the scan in hope that shrinkers have progressed, scan looking for something on shrink lists with zero refcount. If such a thing is found, grab rcu_read_lock() and stop the scan, with caller locking it for eviction, dropping out of RCU and doing __dentry_kill(), with the same treatment for parent as shrink_dentry_list() would do. Note that right now mixed-filesystem shrink lists do not occur, so this is not a mainline bug. Howevere, there's a bunch of uses for such beasts (e.g. the "try and evict everything we can out of given page" patches; there are potential uses in mount-related code, considerably simplifying the life in fs/namespace.c, etc.) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-06-29 22:31:24 +00:00
static void __dput_to_list(struct dentry *dentry, struct list_head *list)
__must_hold(&dentry->d_lock)
{
if (dentry->d_flags & DCACHE_SHRINK_LIST) {
/* let the owner of the list it's on deal with it */
--dentry->d_lockref.count;
} else {
if (dentry->d_flags & DCACHE_LRU_LIST)
d_lru_del(dentry);
if (!--dentry->d_lockref.count)
d_shrink_add(dentry, list);
}
}
void dput_to_list(struct dentry *dentry, struct list_head *list)
{
rcu_read_lock();
if (likely(fast_dput(dentry))) {
rcu_read_unlock();
return;
}
rcu_read_unlock();
if (!retain_dentry(dentry))
__dput_to_list(dentry, list);
spin_unlock(&dentry->d_lock);
}
/* This must be called with d_lock held */
static inline void __dget_dlock(struct dentry *dentry)
{
dentry->d_lockref.count++;
}
static inline void __dget(struct dentry *dentry)
{
lockref_get(&dentry->d_lockref);
}
struct dentry *dget_parent(struct dentry *dentry)
{
int gotref;
struct dentry *ret;
unsigned seq;
/*
* Do optimistic parent lookup without any
* locking.
*/
rcu_read_lock();
seq = raw_seqcount_begin(&dentry->d_seq);
locking/atomics, fs/dcache: Convert ACCESS_ONCE() to READ_ONCE()/WRITE_ONCE() For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the dcache code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-4-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 21:07:14 +00:00
ret = READ_ONCE(dentry->d_parent);
gotref = lockref_get_not_zero(&ret->d_lockref);
rcu_read_unlock();
if (likely(gotref)) {
if (!read_seqcount_retry(&dentry->d_seq, seq))
return ret;
dput(ret);
}
repeat:
/*
* Don't need rcu_dereference because we re-check it was correct under
* the lock.
*/
rcu_read_lock();
ret = dentry->d_parent;
spin_lock(&ret->d_lock);
if (unlikely(ret != dentry->d_parent)) {
spin_unlock(&ret->d_lock);
rcu_read_unlock();
goto repeat;
}
rcu_read_unlock();
BUG_ON(!ret->d_lockref.count);
ret->d_lockref.count++;
spin_unlock(&ret->d_lock);
return ret;
}
EXPORT_SYMBOL(dget_parent);
static struct dentry * __d_find_any_alias(struct inode *inode)
{
struct dentry *alias;
if (hlist_empty(&inode->i_dentry))
return NULL;
alias = hlist_entry(inode->i_dentry.first, struct dentry, d_u.d_alias);
__dget(alias);
return alias;
}
/**
* d_find_any_alias - find any alias for a given inode
* @inode: inode to find an alias for
*
* If any aliases exist for the given inode, take and return a
* reference for one of them. If no aliases exist, return %NULL.
*/
struct dentry *d_find_any_alias(struct inode *inode)
{
struct dentry *de;
spin_lock(&inode->i_lock);
de = __d_find_any_alias(inode);
spin_unlock(&inode->i_lock);
return de;
}
EXPORT_SYMBOL(d_find_any_alias);
/**
* d_find_alias - grab a hashed alias of inode
* @inode: inode in question
*
* If inode has a hashed alias, or is a directory and has any alias,
* acquire the reference to alias and return it. Otherwise return NULL.
* Notice that if inode is a directory there can be only one alias and
* it can be unhashed only if it has no children, or if it is the root
* of a filesystem, or if the directory was renamed and d_revalidate
* was the first vfs operation to notice.
*
[PATCH] knfsd: close a race-opportunity in d_splice_alias There is a possible race in d_splice_alias. Though __d_find_alias(inode, 1) will only return a dentry with DCACHE_DISCONNECTED set, it is possible for it to get cleared before the BUG_ON, and it is is not possible to lock against that. There are a couple of problems here. Firstly, the code doesn't match the comment. The comment describes a 'disconnected' dentry as being IS_ROOT as well as DCACHE_DISCONNECTED, however there is not testing of IS_ROOT anythere. A dentry is marked DCACHE_DISCONNECTED when allocated with d_alloc_anon, and remains DCACHE_DISCONNECTED while a path is built up towards the root. So a dentry can have a valid name and a valid parent and even grandparent, but will still be DCACHE_DISCONNECTED until a path to the root is created. Once the path to the root is complete, everything in the path gets DCACHE_DISCONNECTED cleared. So the fact that DCACHE_DISCONNECTED isn't enough to say that a dentry is free to be spliced in with a given name. This can only be allowed if the dentry does not yet have a name, so the IS_ROOT test is needed too. However even adding that test to __d_find_alias isn't enough. As d_splice_alias drops dcache_lock before calling d_move to perform the splice, it could race with another thread calling d_splice_alias to splice the inode in with a different name in a different part of the tree (in the case where a file has hard links). So that splicing code is only really safe for directories (as we know that directories only have one link). For directories, the caller of d_splice_alias will be holding i_mutex on the (unique) parent so there is no room for a race. A consequence of this is that a non-directory will never benefit from being spliced into a pre-exisiting dentry, but that isn't a problem. It is perfectly OK for a non-directory to have multiple dentries, some anonymous, some not. And the comment for d_splice_alias says that it only happens for directories anyway. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 09:16:16 +00:00
* If the inode has an IS_ROOT, DCACHE_DISCONNECTED alias, then prefer
* any other hashed alias over that one.
*/
static struct dentry *__d_find_alias(struct inode *inode)
{
struct dentry *alias;
if (S_ISDIR(inode->i_mode))
return __d_find_any_alias(inode);
hlist_for_each_entry(alias, &inode->i_dentry, d_u.d_alias) {
spin_lock(&alias->d_lock);
if (!d_unhashed(alias)) {
__dget_dlock(alias);
spin_unlock(&alias->d_lock);
return alias;
}
spin_unlock(&alias->d_lock);
}
return NULL;
}
struct dentry *d_find_alias(struct inode *inode)
{
struct dentry *de = NULL;
if (!hlist_empty(&inode->i_dentry)) {
spin_lock(&inode->i_lock);
de = __d_find_alias(inode);
spin_unlock(&inode->i_lock);
}
return de;
}
EXPORT_SYMBOL(d_find_alias);
/*
* Try to kill dentries associated with this inode.
* WARNING: you must own a reference to inode.
*/
void d_prune_aliases(struct inode *inode)
{
struct dentry *dentry;
restart:
spin_lock(&inode->i_lock);
hlist_for_each_entry(dentry, &inode->i_dentry, d_u.d_alias) {
spin_lock(&dentry->d_lock);
if (!dentry->d_lockref.count) {
struct dentry *parent = lock_parent(dentry);
if (likely(!dentry->d_lockref.count)) {
__dentry_kill(dentry);
dput(parent);
goto restart;
}
if (parent)
spin_unlock(&parent->d_lock);
}
spin_unlock(&dentry->d_lock);
}
spin_unlock(&inode->i_lock);
}
EXPORT_SYMBOL(d_prune_aliases);
/*
* Lock a dentry from shrink list.
* Called under rcu_read_lock() and dentry->d_lock; the former
* guarantees that nothing we access will be freed under us.
* Note that dentry is *not* protected from concurrent dentry_kill(),
* d_delete(), etc.
*
* Return false if dentry has been disrupted or grabbed, leaving
* the caller to kick it off-list. Otherwise, return true and have
* that dentry's inode and parent both locked.
*/
static bool shrink_lock_dentry(struct dentry *dentry)
{
struct inode *inode;
struct dentry *parent;
fix soft lock up at NFS mount via per-SB LRU-list of unused dentries [Summary] Split LRU-list of unused dentries to one per superblock to avoid soft lock up during NFS mounts and remounting of any filesystem. Previously I posted here: http://lkml.org/lkml/2008/3/5/590 [Descriptions] - background dentry_unused is a list of dentries which are not referenced. dentry_unused grows up when references on directories or files are released. This list can be very long if there is huge free memory. - the problem When shrink_dcache_sb() is called, it scans all dentry_unused linearly under spin_lock(), and if dentry->d_sb is differnt from given superblock, scan next dentry. This scan costs very much if there are many entries, and very ineffective if there are many superblocks. IOW, When we need to shrink unused dentries on one dentry, but scans unused dentries on all superblocks in the system. For example, we scan 500 dentries to unmount a filesystem, but scans 1,000,000 or more unused dentries on other superblocks. In our case , At mounting NFS*, shrink_dcache_sb() is called to shrink unused dentries on NFS, but scans 100,000,000 unused dentries on superblocks in the system such as local ext3 filesystems. I hear NFS mounting took 1 min on some system in use. * : NFS uses virtual filesystem in rpc layer, so NFS is affected by this problem. 100,000,000 is possible number on large systems. Per-superblock LRU of unused dentried can reduce the cost in reasonable manner. - How to fix I found this problem is solved by David Chinner's "Per-superblock unused dentry LRU lists V3"(1), so I rebase it and add some fix to reclaim with fairness, which is in Andrew Morton's comments(2). 1) http://lkml.org/lkml/2006/5/25/318 2) http://lkml.org/lkml/2006/5/25/320 Split LRU-list of unused dentries to each superblocks. Then, NFS mounting will check dentries under a superblock instead of all. But this spliting will break LRU of dentry-unused. So, I've attempted to make reclaim unused dentrins with fairness by calculate number of dentries to scan on this sb based on following way number of dentries to scan on this sb = count * (number of dentries on this sb / number of dentries in the machine) - ToDo - I have to measuring performance number and do stress tests. - When unmount occurs during prune_dcache(), scanning on same superblock, It is unable to reach next superblock because it is gone away. We restart scannig superblock from first one, it causes unfairness of reclaim unused dentries on first superblock. But I think this happens very rarely. - Test Results Result on 6GB boxes with excessive unused dentries. Without patch: $ cat /proc/sys/fs/dentry-state 10181835 10180203 45 0 0 0 # mount -t nfs 10.124.60.70:/work/kernel-src nfs real 0m1.830s user 0m0.001s sys 0m1.653s With this patch: $ cat /proc/sys/fs/dentry-state 10236610 10234751 45 0 0 0 # mount -t nfs 10.124.60.70:/work/kernel-src nfs real 0m0.106s user 0m0.002s sys 0m0.032s [akpm@linux-foundation.org: fix comments] Signed-off-by: Kentaro Makita <k-makita@np.css.fujitsu.com> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: David Chinner <dgc@sgi.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:13 +00:00
if (dentry->d_lockref.count)
return false;
inode = dentry->d_inode;
if (inode && unlikely(!spin_trylock(&inode->i_lock))) {
spin_unlock(&dentry->d_lock);
spin_lock(&inode->i_lock);
spin_lock(&dentry->d_lock);
if (unlikely(dentry->d_lockref.count))
goto out;
/* changed inode means that somebody had grabbed it */
if (unlikely(inode != dentry->d_inode))
goto out;
}
shrink_dentry_list(): take parent's ->d_lock earlier The cause of livelocks there is that we are taking ->d_lock on dentry and its parent in the wrong order, forcing us to use trylock on the parent's one. d_walk() takes them in the right order, and unfortunately it's not hard to create a situation when shrink_dentry_list() can't make progress since trylock keeps failing, and shrink_dcache_parent() or check_submounts_and_drop() keeps calling d_walk() disrupting the very shrink_dentry_list() it's waiting for. Solution is straightforward - if that trylock fails, let's unlock the dentry itself and take locks in the right order. We need to stabilize ->d_parent without holding ->d_lock, but that's doable using RCU. And we'd better do that in the very beginning of the loop in shrink_dentry_list(), since the checks on refcount, etc. would need to be redone anyway. That deals with a half of the problem - killing dentries on the shrink list itself. Another one (dropping their parents) is in the next commit. locking parent is interesting - it would be easy to do rcu_read_lock(), lock whatever we think is a parent, lock dentry itself and check if the parent is still the right one. Except that we need to check that *before* locking the dentry, or we are risking taking ->d_lock out of order. Fortunately, once the D1 is locked, we can check if D2->d_parent is equal to D1 without the need to lock D2; D2->d_parent can start or stop pointing to D1 only under D1->d_lock, so taking D1->d_lock is enough. In other words, the right solution is rcu_read_lock/lock what looks like parent right now/check if it's still our parent/rcu_read_unlock/lock the child. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-29 12:54:52 +00:00
parent = dentry->d_parent;
if (IS_ROOT(dentry) || likely(spin_trylock(&parent->d_lock)))
return true;
dcache: remove dentries from LRU before putting on dispose list One of the big problems with modifying the way the dcache shrinker and LRU implementation works is that the LRU is abused in several ways. One of these is shrink_dentry_list(). Basically, we can move a dentry off the LRU onto a different list without doing any accounting changes, and then use dentry_lru_prune() to remove it from what-ever list it is now on to do the LRU accounting at that point. This makes it -really hard- to change the LRU implementation. The use of the per-sb LRU lock serialises movement of the dentries between the different lists and the removal of them, and this is the only reason that it works. If we want to break up the dentry LRU lock and lists into, say, per-node lists, we remove the only serialisation that allows this lru list/dispose list abuse to work. To make this work effectively, the dispose list has to be isolated from the LRU list - dentries have to be removed from the LRU *before* being placed on the dispose list. This means that the LRU accounting and isolation is completed before disposal is started, and that means we can change the LRU implementation freely in future. This means that dentries *must* be marked with DCACHE_SHRINK_LIST when they are placed on the dispose list so that we don't think that parent dentries found in try_prune_one_dentry() are on the LRU when the are actually on the dispose list. This would result in accounting the dentry to the LRU a second time. Hence dentry_lru_del() has to handle the DCACHE_SHRINK_LIST case Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:55 +00:00
spin_unlock(&dentry->d_lock);
spin_lock(&parent->d_lock);
if (unlikely(parent != dentry->d_parent)) {
spin_unlock(&parent->d_lock);
spin_lock(&dentry->d_lock);
goto out;
}
spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
if (likely(!dentry->d_lockref.count))
return true;
spin_unlock(&parent->d_lock);
out:
if (inode)
spin_unlock(&inode->i_lock);
return false;
}
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists Currently, running into a shrink list that contains dentries from different filesystems can cause several unpleasant things for shrink_dcache_parent() and for umount(2). The first problem is that there's a window during shrink_dentry_list() between __dentry_kill() takes a victim out and dropping reference to its parent. During that window the parent looks like a genuine busy dentry. shrink_dcache_parent() (or, worse yet, shrink_dcache_for_umount()) coming at that time will see no eviction candidates and no indication that it needs to wait for some shrink_dentry_list() to proceed further. That applies for any shrink list that might intersect with the subtree we are trying to shrink; the only reason it does not blow on umount(2) in the mainline is that we unregister the memory shrinker before hitting shrink_dcache_for_umount(). Another problem happens if something in a mixed-filesystem shrink list gets be stuck in e.g. iput(), getting umount of unrelated fs to spin waiting for the stuck shrinker to get around to our dentries. Solution: 1) have shrink_dentry_list() decrement the parent's refcount and make sure it's on a shrink list (ours unless it already had been on some other) before calling __dentry_kill(). That eliminates the window when shrink_dcache_parent() would've blown past the entire subtree without noticing anything with zero refcount not on shrink lists. 2) when shrink_dcache_parent() has found no eviction candidates, but some dentries are still sitting on shrink lists, rather than repeating the scan in hope that shrinkers have progressed, scan looking for something on shrink lists with zero refcount. If such a thing is found, grab rcu_read_lock() and stop the scan, with caller locking it for eviction, dropping out of RCU and doing __dentry_kill(), with the same treatment for parent as shrink_dentry_list() would do. Note that right now mixed-filesystem shrink lists do not occur, so this is not a mainline bug. Howevere, there's a bunch of uses for such beasts (e.g. the "try and evict everything we can out of given page" patches; there are potential uses in mount-related code, considerably simplifying the life in fs/namespace.c, etc.) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-06-29 22:31:24 +00:00
void shrink_dentry_list(struct list_head *list)
{
while (!list_empty(list)) {
struct dentry *dentry, *parent;
dentry = list_entry(list->prev, struct dentry, d_lru);
spin_lock(&dentry->d_lock);
rcu_read_lock();
if (!shrink_lock_dentry(dentry)) {
bool can_free = false;
rcu_read_unlock();
d_shrink_del(dentry);
if (dentry->d_lockref.count < 0)
can_free = dentry->d_flags & DCACHE_MAY_FREE;
spin_unlock(&dentry->d_lock);
if (can_free)
dentry_free(dentry);
continue;
}
rcu_read_unlock();
d_shrink_del(dentry);
parent = dentry->d_parent;
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists Currently, running into a shrink list that contains dentries from different filesystems can cause several unpleasant things for shrink_dcache_parent() and for umount(2). The first problem is that there's a window during shrink_dentry_list() between __dentry_kill() takes a victim out and dropping reference to its parent. During that window the parent looks like a genuine busy dentry. shrink_dcache_parent() (or, worse yet, shrink_dcache_for_umount()) coming at that time will see no eviction candidates and no indication that it needs to wait for some shrink_dentry_list() to proceed further. That applies for any shrink list that might intersect with the subtree we are trying to shrink; the only reason it does not blow on umount(2) in the mainline is that we unregister the memory shrinker before hitting shrink_dcache_for_umount(). Another problem happens if something in a mixed-filesystem shrink list gets be stuck in e.g. iput(), getting umount of unrelated fs to spin waiting for the stuck shrinker to get around to our dentries. Solution: 1) have shrink_dentry_list() decrement the parent's refcount and make sure it's on a shrink list (ours unless it already had been on some other) before calling __dentry_kill(). That eliminates the window when shrink_dcache_parent() would've blown past the entire subtree without noticing anything with zero refcount not on shrink lists. 2) when shrink_dcache_parent() has found no eviction candidates, but some dentries are still sitting on shrink lists, rather than repeating the scan in hope that shrinkers have progressed, scan looking for something on shrink lists with zero refcount. If such a thing is found, grab rcu_read_lock() and stop the scan, with caller locking it for eviction, dropping out of RCU and doing __dentry_kill(), with the same treatment for parent as shrink_dentry_list() would do. Note that right now mixed-filesystem shrink lists do not occur, so this is not a mainline bug. Howevere, there's a bunch of uses for such beasts (e.g. the "try and evict everything we can out of given page" patches; there are potential uses in mount-related code, considerably simplifying the life in fs/namespace.c, etc.) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-06-29 22:31:24 +00:00
if (parent != dentry)
__dput_to_list(parent, list);
__dentry_kill(dentry);
fix soft lock up at NFS mount via per-SB LRU-list of unused dentries [Summary] Split LRU-list of unused dentries to one per superblock to avoid soft lock up during NFS mounts and remounting of any filesystem. Previously I posted here: http://lkml.org/lkml/2008/3/5/590 [Descriptions] - background dentry_unused is a list of dentries which are not referenced. dentry_unused grows up when references on directories or files are released. This list can be very long if there is huge free memory. - the problem When shrink_dcache_sb() is called, it scans all dentry_unused linearly under spin_lock(), and if dentry->d_sb is differnt from given superblock, scan next dentry. This scan costs very much if there are many entries, and very ineffective if there are many superblocks. IOW, When we need to shrink unused dentries on one dentry, but scans unused dentries on all superblocks in the system. For example, we scan 500 dentries to unmount a filesystem, but scans 1,000,000 or more unused dentries on other superblocks. In our case , At mounting NFS*, shrink_dcache_sb() is called to shrink unused dentries on NFS, but scans 100,000,000 unused dentries on superblocks in the system such as local ext3 filesystems. I hear NFS mounting took 1 min on some system in use. * : NFS uses virtual filesystem in rpc layer, so NFS is affected by this problem. 100,000,000 is possible number on large systems. Per-superblock LRU of unused dentried can reduce the cost in reasonable manner. - How to fix I found this problem is solved by David Chinner's "Per-superblock unused dentry LRU lists V3"(1), so I rebase it and add some fix to reclaim with fairness, which is in Andrew Morton's comments(2). 1) http://lkml.org/lkml/2006/5/25/318 2) http://lkml.org/lkml/2006/5/25/320 Split LRU-list of unused dentries to each superblocks. Then, NFS mounting will check dentries under a superblock instead of all. But this spliting will break LRU of dentry-unused. So, I've attempted to make reclaim unused dentrins with fairness by calculate number of dentries to scan on this sb based on following way number of dentries to scan on this sb = count * (number of dentries on this sb / number of dentries in the machine) - ToDo - I have to measuring performance number and do stress tests. - When unmount occurs during prune_dcache(), scanning on same superblock, It is unable to reach next superblock because it is gone away. We restart scannig superblock from first one, it causes unfairness of reclaim unused dentries on first superblock. But I think this happens very rarely. - Test Results Result on 6GB boxes with excessive unused dentries. Without patch: $ cat /proc/sys/fs/dentry-state 10181835 10180203 45 0 0 0 # mount -t nfs 10.124.60.70:/work/kernel-src nfs real 0m1.830s user 0m0.001s sys 0m1.653s With this patch: $ cat /proc/sys/fs/dentry-state 10236610 10234751 45 0 0 0 # mount -t nfs 10.124.60.70:/work/kernel-src nfs real 0m0.106s user 0m0.002s sys 0m0.032s [akpm@linux-foundation.org: fix comments] Signed-off-by: Kentaro Makita <k-makita@np.css.fujitsu.com> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: David Chinner <dgc@sgi.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:13 +00:00
}
}
list_lru: add helpers to isolate items Currently, the isolate callback passed to the list_lru_walk family of functions is supposed to just delete an item from the list upon returning LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by __list_lru_walk_one after the callback returns. Since the callback is allowed to drop the lock after removing an item (it has to return LRU_REMOVED_RETRY then), the nr_items can be less than the actual number of elements on the list even if we check them under the lock. This makes it difficult to move items from one list_lru_one to another, which is required for per-memcg list_lru reparenting - we can't just splice the lists, we have to move entries one by one. This patch therefore introduces helpers that must be used by callback functions to isolate items instead of raw list_del/list_move. These are list_lru_isolate and list_lru_isolate_move. They not only remove the entry from the list, but also fix the nr_items counter, making sure nr_items always reflects the actual number of elements on the list if checked under the appropriate lock. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:59:35 +00:00
static enum lru_status dentry_lru_isolate(struct list_head *item,
struct list_lru_one *lru, spinlock_t *lru_lock, void *arg)
{
struct list_head *freeable = arg;
struct dentry *dentry = container_of(item, struct dentry, d_lru);
/*
* we are inverting the lru lock/dentry->d_lock here,
* so use a trylock. If we fail to get the lock, just skip
* it
*/
if (!spin_trylock(&dentry->d_lock))
return LRU_SKIP;
/*
* Referenced dentries are still in use. If they have active
* counts, just remove them from the LRU. Otherwise give them
* another pass through the LRU.
*/
if (dentry->d_lockref.count) {
list_lru: add helpers to isolate items Currently, the isolate callback passed to the list_lru_walk family of functions is supposed to just delete an item from the list upon returning LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by __list_lru_walk_one after the callback returns. Since the callback is allowed to drop the lock after removing an item (it has to return LRU_REMOVED_RETRY then), the nr_items can be less than the actual number of elements on the list even if we check them under the lock. This makes it difficult to move items from one list_lru_one to another, which is required for per-memcg list_lru reparenting - we can't just splice the lists, we have to move entries one by one. This patch therefore introduces helpers that must be used by callback functions to isolate items instead of raw list_del/list_move. These are list_lru_isolate and list_lru_isolate_move. They not only remove the entry from the list, but also fix the nr_items counter, making sure nr_items always reflects the actual number of elements on the list if checked under the appropriate lock. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:59:35 +00:00
d_lru_isolate(lru, dentry);
spin_unlock(&dentry->d_lock);
return LRU_REMOVED;
}
if (dentry->d_flags & DCACHE_REFERENCED) {
dentry->d_flags &= ~DCACHE_REFERENCED;
spin_unlock(&dentry->d_lock);
/*
* The list move itself will be made by the common LRU code. At
* this point, we've dropped the dentry->d_lock but keep the
* lru lock. This is safe to do, since every list movement is
* protected by the lru lock even if both locks are held.
*
* This is guaranteed by the fact that all LRU management
* functions are intermediated by the LRU API calls like
* list_lru_add and list_lru_del. List movement in this file
* only ever occur through this functions or through callbacks
* like this one, that are called from the LRU API.
*
* The only exceptions to this are functions like
* shrink_dentry_list, and code that first checks for the
* DCACHE_SHRINK_LIST flag. Those are guaranteed to be
* operating only with stack provided lists after they are
* properly isolated from the main list. It is thus, always a
* local access.
*/
return LRU_ROTATE;
}
list_lru: add helpers to isolate items Currently, the isolate callback passed to the list_lru_walk family of functions is supposed to just delete an item from the list upon returning LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by __list_lru_walk_one after the callback returns. Since the callback is allowed to drop the lock after removing an item (it has to return LRU_REMOVED_RETRY then), the nr_items can be less than the actual number of elements on the list even if we check them under the lock. This makes it difficult to move items from one list_lru_one to another, which is required for per-memcg list_lru reparenting - we can't just splice the lists, we have to move entries one by one. This patch therefore introduces helpers that must be used by callback functions to isolate items instead of raw list_del/list_move. These are list_lru_isolate and list_lru_isolate_move. They not only remove the entry from the list, but also fix the nr_items counter, making sure nr_items always reflects the actual number of elements on the list if checked under the appropriate lock. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:59:35 +00:00
d_lru_shrink_move(lru, dentry, freeable);
spin_unlock(&dentry->d_lock);
return LRU_REMOVED;
}
/**
dcache: use a dispose list in select_parent select_parent currently abuses the dentry cache LRU to provide cleanup features for child dentries that need to be freed. It moves them to the tail of the LRU, then tells shrink_dcache_parent() to calls __shrink_dcache_sb to unconditionally move them to a dispose list (as DCACHE_REFERENCED is ignored). __shrink_dcache_sb() has to relock the dentries to move them off the LRU onto the dispose list, but otherwise does not touch the dentries that select_parent() moved to the tail of the LRU. It then passses the dispose list to shrink_dentry_list() which tries to free the dentries. IOWs, the use of __shrink_dcache_sb() is superfluous - we can build exactly the same list of dentries for disposal directly in select_parent() and call shrink_dentry_list() instead of calling __shrink_dcache_sb() to do that. This means that we avoid long holds on the lru lock walking the LRU moving dentries to the dispose list We also avoid the need to relock each dentry just to move it off the LRU, reducing the numebr of times we lock each dentry to dispose of them in shrink_dcache_parent() from 3 to 2 times. Further, we remove one of the two callers of __shrink_dcache_sb(). This also means that __shrink_dcache_sb can be moved into back into prune_dcache_sb() and we no longer have to handle referenced dentries conditionally, simplifying the code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-23 08:56:24 +00:00
* prune_dcache_sb - shrink the dcache
* @sb: superblock
list_lru: introduce list_lru_shrink_{count,walk} Kmem accounting of memcg is unusable now, because it lacks slab shrinker support. That means when we hit the limit we will get ENOMEM w/o any chance to recover. What we should do then is to call shrink_slab, which would reclaim old inode/dentry caches from this cgroup. This is what this patch set is intended to do. Basically, it does two things. First, it introduces the notion of per-memcg slab shrinker. A shrinker that wants to reclaim objects per cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be passed the memory cgroup to scan from in shrink_control->memcg. For such shrinkers shrink_slab iterates over the whole cgroup subtree under the target cgroup and calls the shrinker for each kmem-active memory cgroup. Secondly, this patch set makes the list_lru structure per-memcg. It's done transparently to list_lru users - everything they have to do is to tell list_lru_init that they want memcg-aware list_lru. Then the list_lru will automatically distribute objects among per-memcg lists basing on which cgroup the object is accounted to. This way to make FS shrinkers (icache, dcache) memcg-aware we only need to make them use memcg-aware list_lru, and this is what this patch set does. As before, this patch set only enables per-memcg kmem reclaim when the pressure goes from memory.limit, not from memory.kmem.limit. Handling memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and it is still unclear whether we will have this knob in the unified hierarchy. This patch (of 9): NUMA aware slab shrinkers use the list_lru structure to distribute objects coming from different NUMA nodes to different lists. Whenever such a shrinker needs to count or scan objects from a particular node, it issues commands like this: count = list_lru_count_node(lru, sc->nid); freed = list_lru_walk_node(lru, sc->nid, isolate_func, isolate_arg, &sc->nr_to_scan); where sc is an instance of the shrink_control structure passed to it from vmscan. To simplify this, let's add special list_lru functions to be used by shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which consolidate the nid and nr_to_scan arguments in the shrink_control structure. This will also allow us to avoid patching shrinkers that use list_lru when we make shrink_slab() per-memcg - all we will have to do is extend the shrink_control structure to include the target memcg and make list_lru_shrink_{count,walk} handle this appropriately. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Suggested-by: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:58:47 +00:00
* @sc: shrink control, passed to list_lru_shrink_walk()
dcache: use a dispose list in select_parent select_parent currently abuses the dentry cache LRU to provide cleanup features for child dentries that need to be freed. It moves them to the tail of the LRU, then tells shrink_dcache_parent() to calls __shrink_dcache_sb to unconditionally move them to a dispose list (as DCACHE_REFERENCED is ignored). __shrink_dcache_sb() has to relock the dentries to move them off the LRU onto the dispose list, but otherwise does not touch the dentries that select_parent() moved to the tail of the LRU. It then passses the dispose list to shrink_dentry_list() which tries to free the dentries. IOWs, the use of __shrink_dcache_sb() is superfluous - we can build exactly the same list of dentries for disposal directly in select_parent() and call shrink_dentry_list() instead of calling __shrink_dcache_sb() to do that. This means that we avoid long holds on the lru lock walking the LRU moving dentries to the dispose list We also avoid the need to relock each dentry just to move it off the LRU, reducing the numebr of times we lock each dentry to dispose of them in shrink_dcache_parent() from 3 to 2 times. Further, we remove one of the two callers of __shrink_dcache_sb(). This also means that __shrink_dcache_sb can be moved into back into prune_dcache_sb() and we no longer have to handle referenced dentries conditionally, simplifying the code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-23 08:56:24 +00:00
*
list_lru: introduce list_lru_shrink_{count,walk} Kmem accounting of memcg is unusable now, because it lacks slab shrinker support. That means when we hit the limit we will get ENOMEM w/o any chance to recover. What we should do then is to call shrink_slab, which would reclaim old inode/dentry caches from this cgroup. This is what this patch set is intended to do. Basically, it does two things. First, it introduces the notion of per-memcg slab shrinker. A shrinker that wants to reclaim objects per cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be passed the memory cgroup to scan from in shrink_control->memcg. For such shrinkers shrink_slab iterates over the whole cgroup subtree under the target cgroup and calls the shrinker for each kmem-active memory cgroup. Secondly, this patch set makes the list_lru structure per-memcg. It's done transparently to list_lru users - everything they have to do is to tell list_lru_init that they want memcg-aware list_lru. Then the list_lru will automatically distribute objects among per-memcg lists basing on which cgroup the object is accounted to. This way to make FS shrinkers (icache, dcache) memcg-aware we only need to make them use memcg-aware list_lru, and this is what this patch set does. As before, this patch set only enables per-memcg kmem reclaim when the pressure goes from memory.limit, not from memory.kmem.limit. Handling memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and it is still unclear whether we will have this knob in the unified hierarchy. This patch (of 9): NUMA aware slab shrinkers use the list_lru structure to distribute objects coming from different NUMA nodes to different lists. Whenever such a shrinker needs to count or scan objects from a particular node, it issues commands like this: count = list_lru_count_node(lru, sc->nid); freed = list_lru_walk_node(lru, sc->nid, isolate_func, isolate_arg, &sc->nr_to_scan); where sc is an instance of the shrink_control structure passed to it from vmscan. To simplify this, let's add special list_lru functions to be used by shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which consolidate the nid and nr_to_scan arguments in the shrink_control structure. This will also allow us to avoid patching shrinkers that use list_lru when we make shrink_slab() per-memcg - all we will have to do is extend the shrink_control structure to include the target memcg and make list_lru_shrink_{count,walk} handle this appropriately. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Suggested-by: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:58:47 +00:00
* Attempt to shrink the superblock dcache LRU by @sc->nr_to_scan entries. This
* is done when we need more memory and called from the superblock shrinker
dcache: use a dispose list in select_parent select_parent currently abuses the dentry cache LRU to provide cleanup features for child dentries that need to be freed. It moves them to the tail of the LRU, then tells shrink_dcache_parent() to calls __shrink_dcache_sb to unconditionally move them to a dispose list (as DCACHE_REFERENCED is ignored). __shrink_dcache_sb() has to relock the dentries to move them off the LRU onto the dispose list, but otherwise does not touch the dentries that select_parent() moved to the tail of the LRU. It then passses the dispose list to shrink_dentry_list() which tries to free the dentries. IOWs, the use of __shrink_dcache_sb() is superfluous - we can build exactly the same list of dentries for disposal directly in select_parent() and call shrink_dentry_list() instead of calling __shrink_dcache_sb() to do that. This means that we avoid long holds on the lru lock walking the LRU moving dentries to the dispose list We also avoid the need to relock each dentry just to move it off the LRU, reducing the numebr of times we lock each dentry to dispose of them in shrink_dcache_parent() from 3 to 2 times. Further, we remove one of the two callers of __shrink_dcache_sb(). This also means that __shrink_dcache_sb can be moved into back into prune_dcache_sb() and we no longer have to handle referenced dentries conditionally, simplifying the code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-23 08:56:24 +00:00
* function.
*
dcache: use a dispose list in select_parent select_parent currently abuses the dentry cache LRU to provide cleanup features for child dentries that need to be freed. It moves them to the tail of the LRU, then tells shrink_dcache_parent() to calls __shrink_dcache_sb to unconditionally move them to a dispose list (as DCACHE_REFERENCED is ignored). __shrink_dcache_sb() has to relock the dentries to move them off the LRU onto the dispose list, but otherwise does not touch the dentries that select_parent() moved to the tail of the LRU. It then passses the dispose list to shrink_dentry_list() which tries to free the dentries. IOWs, the use of __shrink_dcache_sb() is superfluous - we can build exactly the same list of dentries for disposal directly in select_parent() and call shrink_dentry_list() instead of calling __shrink_dcache_sb() to do that. This means that we avoid long holds on the lru lock walking the LRU moving dentries to the dispose list We also avoid the need to relock each dentry just to move it off the LRU, reducing the numebr of times we lock each dentry to dispose of them in shrink_dcache_parent() from 3 to 2 times. Further, we remove one of the two callers of __shrink_dcache_sb(). This also means that __shrink_dcache_sb can be moved into back into prune_dcache_sb() and we no longer have to handle referenced dentries conditionally, simplifying the code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-23 08:56:24 +00:00
* This function may fail to free any resources if all the dentries are in
* use.
*/
list_lru: introduce list_lru_shrink_{count,walk} Kmem accounting of memcg is unusable now, because it lacks slab shrinker support. That means when we hit the limit we will get ENOMEM w/o any chance to recover. What we should do then is to call shrink_slab, which would reclaim old inode/dentry caches from this cgroup. This is what this patch set is intended to do. Basically, it does two things. First, it introduces the notion of per-memcg slab shrinker. A shrinker that wants to reclaim objects per cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be passed the memory cgroup to scan from in shrink_control->memcg. For such shrinkers shrink_slab iterates over the whole cgroup subtree under the target cgroup and calls the shrinker for each kmem-active memory cgroup. Secondly, this patch set makes the list_lru structure per-memcg. It's done transparently to list_lru users - everything they have to do is to tell list_lru_init that they want memcg-aware list_lru. Then the list_lru will automatically distribute objects among per-memcg lists basing on which cgroup the object is accounted to. This way to make FS shrinkers (icache, dcache) memcg-aware we only need to make them use memcg-aware list_lru, and this is what this patch set does. As before, this patch set only enables per-memcg kmem reclaim when the pressure goes from memory.limit, not from memory.kmem.limit. Handling memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and it is still unclear whether we will have this knob in the unified hierarchy. This patch (of 9): NUMA aware slab shrinkers use the list_lru structure to distribute objects coming from different NUMA nodes to different lists. Whenever such a shrinker needs to count or scan objects from a particular node, it issues commands like this: count = list_lru_count_node(lru, sc->nid); freed = list_lru_walk_node(lru, sc->nid, isolate_func, isolate_arg, &sc->nr_to_scan); where sc is an instance of the shrink_control structure passed to it from vmscan. To simplify this, let's add special list_lru functions to be used by shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which consolidate the nid and nr_to_scan arguments in the shrink_control structure. This will also allow us to avoid patching shrinkers that use list_lru when we make shrink_slab() per-memcg - all we will have to do is extend the shrink_control structure to include the target memcg and make list_lru_shrink_{count,walk} handle this appropriately. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Suggested-by: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:58:47 +00:00
long prune_dcache_sb(struct super_block *sb, struct shrink_control *sc)
{
LIST_HEAD(dispose);
long freed;
list_lru: introduce list_lru_shrink_{count,walk} Kmem accounting of memcg is unusable now, because it lacks slab shrinker support. That means when we hit the limit we will get ENOMEM w/o any chance to recover. What we should do then is to call shrink_slab, which would reclaim old inode/dentry caches from this cgroup. This is what this patch set is intended to do. Basically, it does two things. First, it introduces the notion of per-memcg slab shrinker. A shrinker that wants to reclaim objects per cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be passed the memory cgroup to scan from in shrink_control->memcg. For such shrinkers shrink_slab iterates over the whole cgroup subtree under the target cgroup and calls the shrinker for each kmem-active memory cgroup. Secondly, this patch set makes the list_lru structure per-memcg. It's done transparently to list_lru users - everything they have to do is to tell list_lru_init that they want memcg-aware list_lru. Then the list_lru will automatically distribute objects among per-memcg lists basing on which cgroup the object is accounted to. This way to make FS shrinkers (icache, dcache) memcg-aware we only need to make them use memcg-aware list_lru, and this is what this patch set does. As before, this patch set only enables per-memcg kmem reclaim when the pressure goes from memory.limit, not from memory.kmem.limit. Handling memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and it is still unclear whether we will have this knob in the unified hierarchy. This patch (of 9): NUMA aware slab shrinkers use the list_lru structure to distribute objects coming from different NUMA nodes to different lists. Whenever such a shrinker needs to count or scan objects from a particular node, it issues commands like this: count = list_lru_count_node(lru, sc->nid); freed = list_lru_walk_node(lru, sc->nid, isolate_func, isolate_arg, &sc->nr_to_scan); where sc is an instance of the shrink_control structure passed to it from vmscan. To simplify this, let's add special list_lru functions to be used by shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which consolidate the nid and nr_to_scan arguments in the shrink_control structure. This will also allow us to avoid patching shrinkers that use list_lru when we make shrink_slab() per-memcg - all we will have to do is extend the shrink_control structure to include the target memcg and make list_lru_shrink_{count,walk} handle this appropriately. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Suggested-by: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:58:47 +00:00
freed = list_lru_shrink_walk(&sb->s_dentry_lru, sc,
dentry_lru_isolate, &dispose);
shrink_dentry_list(&dispose);
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
return freed;
fix soft lock up at NFS mount via per-SB LRU-list of unused dentries [Summary] Split LRU-list of unused dentries to one per superblock to avoid soft lock up during NFS mounts and remounting of any filesystem. Previously I posted here: http://lkml.org/lkml/2008/3/5/590 [Descriptions] - background dentry_unused is a list of dentries which are not referenced. dentry_unused grows up when references on directories or files are released. This list can be very long if there is huge free memory. - the problem When shrink_dcache_sb() is called, it scans all dentry_unused linearly under spin_lock(), and if dentry->d_sb is differnt from given superblock, scan next dentry. This scan costs very much if there are many entries, and very ineffective if there are many superblocks. IOW, When we need to shrink unused dentries on one dentry, but scans unused dentries on all superblocks in the system. For example, we scan 500 dentries to unmount a filesystem, but scans 1,000,000 or more unused dentries on other superblocks. In our case , At mounting NFS*, shrink_dcache_sb() is called to shrink unused dentries on NFS, but scans 100,000,000 unused dentries on superblocks in the system such as local ext3 filesystems. I hear NFS mounting took 1 min on some system in use. * : NFS uses virtual filesystem in rpc layer, so NFS is affected by this problem. 100,000,000 is possible number on large systems. Per-superblock LRU of unused dentried can reduce the cost in reasonable manner. - How to fix I found this problem is solved by David Chinner's "Per-superblock unused dentry LRU lists V3"(1), so I rebase it and add some fix to reclaim with fairness, which is in Andrew Morton's comments(2). 1) http://lkml.org/lkml/2006/5/25/318 2) http://lkml.org/lkml/2006/5/25/320 Split LRU-list of unused dentries to each superblocks. Then, NFS mounting will check dentries under a superblock instead of all. But this spliting will break LRU of dentry-unused. So, I've attempted to make reclaim unused dentrins with fairness by calculate number of dentries to scan on this sb based on following way number of dentries to scan on this sb = count * (number of dentries on this sb / number of dentries in the machine) - ToDo - I have to measuring performance number and do stress tests. - When unmount occurs during prune_dcache(), scanning on same superblock, It is unable to reach next superblock because it is gone away. We restart scannig superblock from first one, it causes unfairness of reclaim unused dentries on first superblock. But I think this happens very rarely. - Test Results Result on 6GB boxes with excessive unused dentries. Without patch: $ cat /proc/sys/fs/dentry-state 10181835 10180203 45 0 0 0 # mount -t nfs 10.124.60.70:/work/kernel-src nfs real 0m1.830s user 0m0.001s sys 0m1.653s With this patch: $ cat /proc/sys/fs/dentry-state 10236610 10234751 45 0 0 0 # mount -t nfs 10.124.60.70:/work/kernel-src nfs real 0m0.106s user 0m0.002s sys 0m0.032s [akpm@linux-foundation.org: fix comments] Signed-off-by: Kentaro Makita <k-makita@np.css.fujitsu.com> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: David Chinner <dgc@sgi.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:13 +00:00
}
list_lru: remove special case function list_lru_dispose_all. The list_lru implementation has one function, list_lru_dispose_all, with only one user (the dentry code). At first, such function appears to make sense because we are really not interested in the result of isolating each dentry separately - all of them are going away anyway. However, it's implementation is buggy in the following way: When we call list_lru_dispose_all in fs/dcache.c, we scan all dentries marking them with DCACHE_SHRINK_LIST. However, this is done without the nlru->lock taken. The imediate result of that is that someone else may add or remove the dentry from the LRU at the same time. When list_lru_del happens in that scenario we will see an element that is not yet marked with DCACHE_SHRINK_LIST (even though it will be in the future) and obviously remove it from an lru where the element no longer is. Since list_lru_dispose_all will in effect count down nlru's nr_items and list_lru_del will do the same, this will lead to an imbalance. The solution for this would not be so simple: we can obviously just keep the lru_lock taken, but then we have no guarantees that we will be able to acquire the dentry lock (dentry->d_lock). To properly solve this, we need a communication mechanism between the lru and dentry code, so they can coordinate this with each other. Such mechanism already exists in the form of the list_lru_walk_cb callback. So it is possible to construct a dcache-side prune function that does the right thing only by calling list_lru_walk in a loop until no more dentries are available. With only one user, plus the fact that a sane solution for the problem would involve boucing between dcache and list_lru anyway, I see little justification to keep the special case list_lru_dispose_all in tree. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:03 +00:00
static enum lru_status dentry_lru_isolate_shrink(struct list_head *item,
list_lru: add helpers to isolate items Currently, the isolate callback passed to the list_lru_walk family of functions is supposed to just delete an item from the list upon returning LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by __list_lru_walk_one after the callback returns. Since the callback is allowed to drop the lock after removing an item (it has to return LRU_REMOVED_RETRY then), the nr_items can be less than the actual number of elements on the list even if we check them under the lock. This makes it difficult to move items from one list_lru_one to another, which is required for per-memcg list_lru reparenting - we can't just splice the lists, we have to move entries one by one. This patch therefore introduces helpers that must be used by callback functions to isolate items instead of raw list_del/list_move. These are list_lru_isolate and list_lru_isolate_move. They not only remove the entry from the list, but also fix the nr_items counter, making sure nr_items always reflects the actual number of elements on the list if checked under the appropriate lock. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:59:35 +00:00
struct list_lru_one *lru, spinlock_t *lru_lock, void *arg)
dcache: remove dentries from LRU before putting on dispose list One of the big problems with modifying the way the dcache shrinker and LRU implementation works is that the LRU is abused in several ways. One of these is shrink_dentry_list(). Basically, we can move a dentry off the LRU onto a different list without doing any accounting changes, and then use dentry_lru_prune() to remove it from what-ever list it is now on to do the LRU accounting at that point. This makes it -really hard- to change the LRU implementation. The use of the per-sb LRU lock serialises movement of the dentries between the different lists and the removal of them, and this is the only reason that it works. If we want to break up the dentry LRU lock and lists into, say, per-node lists, we remove the only serialisation that allows this lru list/dispose list abuse to work. To make this work effectively, the dispose list has to be isolated from the LRU list - dentries have to be removed from the LRU *before* being placed on the dispose list. This means that the LRU accounting and isolation is completed before disposal is started, and that means we can change the LRU implementation freely in future. This means that dentries *must* be marked with DCACHE_SHRINK_LIST when they are placed on the dispose list so that we don't think that parent dentries found in try_prune_one_dentry() are on the LRU when the are actually on the dispose list. This would result in accounting the dentry to the LRU a second time. Hence dentry_lru_del() has to handle the DCACHE_SHRINK_LIST case Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:55 +00:00
{
list_lru: remove special case function list_lru_dispose_all. The list_lru implementation has one function, list_lru_dispose_all, with only one user (the dentry code). At first, such function appears to make sense because we are really not interested in the result of isolating each dentry separately - all of them are going away anyway. However, it's implementation is buggy in the following way: When we call list_lru_dispose_all in fs/dcache.c, we scan all dentries marking them with DCACHE_SHRINK_LIST. However, this is done without the nlru->lock taken. The imediate result of that is that someone else may add or remove the dentry from the LRU at the same time. When list_lru_del happens in that scenario we will see an element that is not yet marked with DCACHE_SHRINK_LIST (even though it will be in the future) and obviously remove it from an lru where the element no longer is. Since list_lru_dispose_all will in effect count down nlru's nr_items and list_lru_del will do the same, this will lead to an imbalance. The solution for this would not be so simple: we can obviously just keep the lru_lock taken, but then we have no guarantees that we will be able to acquire the dentry lock (dentry->d_lock). To properly solve this, we need a communication mechanism between the lru and dentry code, so they can coordinate this with each other. Such mechanism already exists in the form of the list_lru_walk_cb callback. So it is possible to construct a dcache-side prune function that does the right thing only by calling list_lru_walk in a loop until no more dentries are available. With only one user, plus the fact that a sane solution for the problem would involve boucing between dcache and list_lru anyway, I see little justification to keep the special case list_lru_dispose_all in tree. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:03 +00:00
struct list_head *freeable = arg;
struct dentry *dentry = container_of(item, struct dentry, d_lru);
dcache: remove dentries from LRU before putting on dispose list One of the big problems with modifying the way the dcache shrinker and LRU implementation works is that the LRU is abused in several ways. One of these is shrink_dentry_list(). Basically, we can move a dentry off the LRU onto a different list without doing any accounting changes, and then use dentry_lru_prune() to remove it from what-ever list it is now on to do the LRU accounting at that point. This makes it -really hard- to change the LRU implementation. The use of the per-sb LRU lock serialises movement of the dentries between the different lists and the removal of them, and this is the only reason that it works. If we want to break up the dentry LRU lock and lists into, say, per-node lists, we remove the only serialisation that allows this lru list/dispose list abuse to work. To make this work effectively, the dispose list has to be isolated from the LRU list - dentries have to be removed from the LRU *before* being placed on the dispose list. This means that the LRU accounting and isolation is completed before disposal is started, and that means we can change the LRU implementation freely in future. This means that dentries *must* be marked with DCACHE_SHRINK_LIST when they are placed on the dispose list so that we don't think that parent dentries found in try_prune_one_dentry() are on the LRU when the are actually on the dispose list. This would result in accounting the dentry to the LRU a second time. Hence dentry_lru_del() has to handle the DCACHE_SHRINK_LIST case Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:55 +00:00
list_lru: remove special case function list_lru_dispose_all. The list_lru implementation has one function, list_lru_dispose_all, with only one user (the dentry code). At first, such function appears to make sense because we are really not interested in the result of isolating each dentry separately - all of them are going away anyway. However, it's implementation is buggy in the following way: When we call list_lru_dispose_all in fs/dcache.c, we scan all dentries marking them with DCACHE_SHRINK_LIST. However, this is done without the nlru->lock taken. The imediate result of that is that someone else may add or remove the dentry from the LRU at the same time. When list_lru_del happens in that scenario we will see an element that is not yet marked with DCACHE_SHRINK_LIST (even though it will be in the future) and obviously remove it from an lru where the element no longer is. Since list_lru_dispose_all will in effect count down nlru's nr_items and list_lru_del will do the same, this will lead to an imbalance. The solution for this would not be so simple: we can obviously just keep the lru_lock taken, but then we have no guarantees that we will be able to acquire the dentry lock (dentry->d_lock). To properly solve this, we need a communication mechanism between the lru and dentry code, so they can coordinate this with each other. Such mechanism already exists in the form of the list_lru_walk_cb callback. So it is possible to construct a dcache-side prune function that does the right thing only by calling list_lru_walk in a loop until no more dentries are available. With only one user, plus the fact that a sane solution for the problem would involve boucing between dcache and list_lru anyway, I see little justification to keep the special case list_lru_dispose_all in tree. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:03 +00:00
/*
* we are inverting the lru lock/dentry->d_lock here,
* so use a trylock. If we fail to get the lock, just skip
* it
*/
if (!spin_trylock(&dentry->d_lock))
return LRU_SKIP;
list_lru: add helpers to isolate items Currently, the isolate callback passed to the list_lru_walk family of functions is supposed to just delete an item from the list upon returning LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by __list_lru_walk_one after the callback returns. Since the callback is allowed to drop the lock after removing an item (it has to return LRU_REMOVED_RETRY then), the nr_items can be less than the actual number of elements on the list even if we check them under the lock. This makes it difficult to move items from one list_lru_one to another, which is required for per-memcg list_lru reparenting - we can't just splice the lists, we have to move entries one by one. This patch therefore introduces helpers that must be used by callback functions to isolate items instead of raw list_del/list_move. These are list_lru_isolate and list_lru_isolate_move. They not only remove the entry from the list, but also fix the nr_items counter, making sure nr_items always reflects the actual number of elements on the list if checked under the appropriate lock. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:59:35 +00:00
d_lru_shrink_move(lru, dentry, freeable);
list_lru: remove special case function list_lru_dispose_all. The list_lru implementation has one function, list_lru_dispose_all, with only one user (the dentry code). At first, such function appears to make sense because we are really not interested in the result of isolating each dentry separately - all of them are going away anyway. However, it's implementation is buggy in the following way: When we call list_lru_dispose_all in fs/dcache.c, we scan all dentries marking them with DCACHE_SHRINK_LIST. However, this is done without the nlru->lock taken. The imediate result of that is that someone else may add or remove the dentry from the LRU at the same time. When list_lru_del happens in that scenario we will see an element that is not yet marked with DCACHE_SHRINK_LIST (even though it will be in the future) and obviously remove it from an lru where the element no longer is. Since list_lru_dispose_all will in effect count down nlru's nr_items and list_lru_del will do the same, this will lead to an imbalance. The solution for this would not be so simple: we can obviously just keep the lru_lock taken, but then we have no guarantees that we will be able to acquire the dentry lock (dentry->d_lock). To properly solve this, we need a communication mechanism between the lru and dentry code, so they can coordinate this with each other. Such mechanism already exists in the form of the list_lru_walk_cb callback. So it is possible to construct a dcache-side prune function that does the right thing only by calling list_lru_walk in a loop until no more dentries are available. With only one user, plus the fact that a sane solution for the problem would involve boucing between dcache and list_lru anyway, I see little justification to keep the special case list_lru_dispose_all in tree. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:03 +00:00
spin_unlock(&dentry->d_lock);
list_lru: remove special case function list_lru_dispose_all. The list_lru implementation has one function, list_lru_dispose_all, with only one user (the dentry code). At first, such function appears to make sense because we are really not interested in the result of isolating each dentry separately - all of them are going away anyway. However, it's implementation is buggy in the following way: When we call list_lru_dispose_all in fs/dcache.c, we scan all dentries marking them with DCACHE_SHRINK_LIST. However, this is done without the nlru->lock taken. The imediate result of that is that someone else may add or remove the dentry from the LRU at the same time. When list_lru_del happens in that scenario we will see an element that is not yet marked with DCACHE_SHRINK_LIST (even though it will be in the future) and obviously remove it from an lru where the element no longer is. Since list_lru_dispose_all will in effect count down nlru's nr_items and list_lru_del will do the same, this will lead to an imbalance. The solution for this would not be so simple: we can obviously just keep the lru_lock taken, but then we have no guarantees that we will be able to acquire the dentry lock (dentry->d_lock). To properly solve this, we need a communication mechanism between the lru and dentry code, so they can coordinate this with each other. Such mechanism already exists in the form of the list_lru_walk_cb callback. So it is possible to construct a dcache-side prune function that does the right thing only by calling list_lru_walk in a loop until no more dentries are available. With only one user, plus the fact that a sane solution for the problem would involve boucing between dcache and list_lru anyway, I see little justification to keep the special case list_lru_dispose_all in tree. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:03 +00:00
return LRU_REMOVED;
fix soft lock up at NFS mount via per-SB LRU-list of unused dentries [Summary] Split LRU-list of unused dentries to one per superblock to avoid soft lock up during NFS mounts and remounting of any filesystem. Previously I posted here: http://lkml.org/lkml/2008/3/5/590 [Descriptions] - background dentry_unused is a list of dentries which are not referenced. dentry_unused grows up when references on directories or files are released. This list can be very long if there is huge free memory. - the problem When shrink_dcache_sb() is called, it scans all dentry_unused linearly under spin_lock(), and if dentry->d_sb is differnt from given superblock, scan next dentry. This scan costs very much if there are many entries, and very ineffective if there are many superblocks. IOW, When we need to shrink unused dentries on one dentry, but scans unused dentries on all superblocks in the system. For example, we scan 500 dentries to unmount a filesystem, but scans 1,000,000 or more unused dentries on other superblocks. In our case , At mounting NFS*, shrink_dcache_sb() is called to shrink unused dentries on NFS, but scans 100,000,000 unused dentries on superblocks in the system such as local ext3 filesystems. I hear NFS mounting took 1 min on some system in use. * : NFS uses virtual filesystem in rpc layer, so NFS is affected by this problem. 100,000,000 is possible number on large systems. Per-superblock LRU of unused dentried can reduce the cost in reasonable manner. - How to fix I found this problem is solved by David Chinner's "Per-superblock unused dentry LRU lists V3"(1), so I rebase it and add some fix to reclaim with fairness, which is in Andrew Morton's comments(2). 1) http://lkml.org/lkml/2006/5/25/318 2) http://lkml.org/lkml/2006/5/25/320 Split LRU-list of unused dentries to each superblocks. Then, NFS mounting will check dentries under a superblock instead of all. But this spliting will break LRU of dentry-unused. So, I've attempted to make reclaim unused dentrins with fairness by calculate number of dentries to scan on this sb based on following way number of dentries to scan on this sb = count * (number of dentries on this sb / number of dentries in the machine) - ToDo - I have to measuring performance number and do stress tests. - When unmount occurs during prune_dcache(), scanning on same superblock, It is unable to reach next superblock because it is gone away. We restart scannig superblock from first one, it causes unfairness of reclaim unused dentries on first superblock. But I think this happens very rarely. - Test Results Result on 6GB boxes with excessive unused dentries. Without patch: $ cat /proc/sys/fs/dentry-state 10181835 10180203 45 0 0 0 # mount -t nfs 10.124.60.70:/work/kernel-src nfs real 0m1.830s user 0m0.001s sys 0m1.653s With this patch: $ cat /proc/sys/fs/dentry-state 10236610 10234751 45 0 0 0 # mount -t nfs 10.124.60.70:/work/kernel-src nfs real 0m0.106s user 0m0.002s sys 0m0.032s [akpm@linux-foundation.org: fix comments] Signed-off-by: Kentaro Makita <k-makita@np.css.fujitsu.com> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: David Chinner <dgc@sgi.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 04:27:13 +00:00
}
list_lru: remove special case function list_lru_dispose_all. The list_lru implementation has one function, list_lru_dispose_all, with only one user (the dentry code). At first, such function appears to make sense because we are really not interested in the result of isolating each dentry separately - all of them are going away anyway. However, it's implementation is buggy in the following way: When we call list_lru_dispose_all in fs/dcache.c, we scan all dentries marking them with DCACHE_SHRINK_LIST. However, this is done without the nlru->lock taken. The imediate result of that is that someone else may add or remove the dentry from the LRU at the same time. When list_lru_del happens in that scenario we will see an element that is not yet marked with DCACHE_SHRINK_LIST (even though it will be in the future) and obviously remove it from an lru where the element no longer is. Since list_lru_dispose_all will in effect count down nlru's nr_items and list_lru_del will do the same, this will lead to an imbalance. The solution for this would not be so simple: we can obviously just keep the lru_lock taken, but then we have no guarantees that we will be able to acquire the dentry lock (dentry->d_lock). To properly solve this, we need a communication mechanism between the lru and dentry code, so they can coordinate this with each other. Such mechanism already exists in the form of the list_lru_walk_cb callback. So it is possible to construct a dcache-side prune function that does the right thing only by calling list_lru_walk in a loop until no more dentries are available. With only one user, plus the fact that a sane solution for the problem would involve boucing between dcache and list_lru anyway, I see little justification to keep the special case list_lru_dispose_all in tree. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:03 +00:00
/**
* shrink_dcache_sb - shrink dcache for a superblock
* @sb: superblock
*
* Shrink the dcache for the specified super block. This is used to free
* the dcache before unmounting a file system.
*/
void shrink_dcache_sb(struct super_block *sb)
{
list_lru: remove special case function list_lru_dispose_all. The list_lru implementation has one function, list_lru_dispose_all, with only one user (the dentry code). At first, such function appears to make sense because we are really not interested in the result of isolating each dentry separately - all of them are going away anyway. However, it's implementation is buggy in the following way: When we call list_lru_dispose_all in fs/dcache.c, we scan all dentries marking them with DCACHE_SHRINK_LIST. However, this is done without the nlru->lock taken. The imediate result of that is that someone else may add or remove the dentry from the LRU at the same time. When list_lru_del happens in that scenario we will see an element that is not yet marked with DCACHE_SHRINK_LIST (even though it will be in the future) and obviously remove it from an lru where the element no longer is. Since list_lru_dispose_all will in effect count down nlru's nr_items and list_lru_del will do the same, this will lead to an imbalance. The solution for this would not be so simple: we can obviously just keep the lru_lock taken, but then we have no guarantees that we will be able to acquire the dentry lock (dentry->d_lock). To properly solve this, we need a communication mechanism between the lru and dentry code, so they can coordinate this with each other. Such mechanism already exists in the form of the list_lru_walk_cb callback. So it is possible to construct a dcache-side prune function that does the right thing only by calling list_lru_walk in a loop until no more dentries are available. With only one user, plus the fact that a sane solution for the problem would involve boucing between dcache and list_lru anyway, I see little justification to keep the special case list_lru_dispose_all in tree. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:03 +00:00
do {
LIST_HEAD(dispose);
list_lru_walk(&sb->s_dentry_lru,
fs/dcache.c: fix spin lockup issue on nlru->lock __list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer duration if there are more number of items in the lru list. As per the current code, it can hold the spin lock for upto maximum UINT_MAX entries at a time. So if there are more number of items in the lru list, then "BUG: spinlock lockup suspected" is observed in the below path: spin_bug+0x90 do_raw_spin_lock+0xfc _raw_spin_lock+0x28 list_lru_add+0x28 dput+0x1c8 path_put+0x20 terminate_walk+0x3c path_lookupat+0x100 filename_lookup+0x6c user_path_at_empty+0x54 SyS_faccessat+0xd0 el0_svc_naked+0x24 This nlru->lock is acquired by another CPU in this path - d_lru_shrink_move+0x34 dentry_lru_isolate_shrink+0x48 __list_lru_walk_one.isra.10+0x94 list_lru_walk_node+0x40 shrink_dcache_sb+0x60 do_remount_sb+0xbc do_emergency_remount+0xb0 process_one_work+0x228 worker_thread+0x2e0 kthread+0xf4 ret_from_fork+0x10 Fix this lockup by reducing the number of entries to be shrinked from the lru list to 1024 at once. Also, add cond_resched() before processing the lru list again. Link: http://marc.info/?t=149722864900001&r=1&w=2 Link: http://lkml.kernel.org/r/1498707575-2472-1-git-send-email-stummala@codeaurora.org Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Suggested-by: Jan Kara <jack@suse.cz> Suggested-by: Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Alexander Polakov <apolyakov@beget.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 22:50:00 +00:00
dentry_lru_isolate_shrink, &dispose, 1024);
list_lru: remove special case function list_lru_dispose_all. The list_lru implementation has one function, list_lru_dispose_all, with only one user (the dentry code). At first, such function appears to make sense because we are really not interested in the result of isolating each dentry separately - all of them are going away anyway. However, it's implementation is buggy in the following way: When we call list_lru_dispose_all in fs/dcache.c, we scan all dentries marking them with DCACHE_SHRINK_LIST. However, this is done without the nlru->lock taken. The imediate result of that is that someone else may add or remove the dentry from the LRU at the same time. When list_lru_del happens in that scenario we will see an element that is not yet marked with DCACHE_SHRINK_LIST (even though it will be in the future) and obviously remove it from an lru where the element no longer is. Since list_lru_dispose_all will in effect count down nlru's nr_items and list_lru_del will do the same, this will lead to an imbalance. The solution for this would not be so simple: we can obviously just keep the lru_lock taken, but then we have no guarantees that we will be able to acquire the dentry lock (dentry->d_lock). To properly solve this, we need a communication mechanism between the lru and dentry code, so they can coordinate this with each other. Such mechanism already exists in the form of the list_lru_walk_cb callback. So it is possible to construct a dcache-side prune function that does the right thing only by calling list_lru_walk in a loop until no more dentries are available. With only one user, plus the fact that a sane solution for the problem would involve boucing between dcache and list_lru anyway, I see little justification to keep the special case list_lru_dispose_all in tree. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:03 +00:00
shrink_dentry_list(&dispose);
fs/dcache.c: fix spin lockup issue on nlru->lock __list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer duration if there are more number of items in the lru list. As per the current code, it can hold the spin lock for upto maximum UINT_MAX entries at a time. So if there are more number of items in the lru list, then "BUG: spinlock lockup suspected" is observed in the below path: spin_bug+0x90 do_raw_spin_lock+0xfc _raw_spin_lock+0x28 list_lru_add+0x28 dput+0x1c8 path_put+0x20 terminate_walk+0x3c path_lookupat+0x100 filename_lookup+0x6c user_path_at_empty+0x54 SyS_faccessat+0xd0 el0_svc_naked+0x24 This nlru->lock is acquired by another CPU in this path - d_lru_shrink_move+0x34 dentry_lru_isolate_shrink+0x48 __list_lru_walk_one.isra.10+0x94 list_lru_walk_node+0x40 shrink_dcache_sb+0x60 do_remount_sb+0xbc do_emergency_remount+0xb0 process_one_work+0x228 worker_thread+0x2e0 kthread+0xf4 ret_from_fork+0x10 Fix this lockup by reducing the number of entries to be shrinked from the lru list to 1024 at once. Also, add cond_resched() before processing the lru list again. Link: http://marc.info/?t=149722864900001&r=1&w=2 Link: http://lkml.kernel.org/r/1498707575-2472-1-git-send-email-stummala@codeaurora.org Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Suggested-by: Jan Kara <jack@suse.cz> Suggested-by: Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Alexander Polakov <apolyakov@beget.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 22:50:00 +00:00
} while (list_lru_count(&sb->s_dentry_lru) > 0);
}
EXPORT_SYMBOL(shrink_dcache_sb);
/**
* enum d_walk_ret - action to talke during tree walk
* @D_WALK_CONTINUE: contrinue walk
* @D_WALK_QUIT: quit walk
* @D_WALK_NORETRY: quit when retry is needed
* @D_WALK_SKIP: skip this dentry and its children
*/
enum d_walk_ret {
D_WALK_CONTINUE,
D_WALK_QUIT,
D_WALK_NORETRY,
D_WALK_SKIP,
};
/**
* d_walk - walk the dentry tree
* @parent: start of walk
* @data: data passed to @enter() and @finish()
* @enter: callback when first entering the dentry
*
* The @enter() callbacks are called with d_lock held.
*/
static void d_walk(struct dentry *parent, void *data,
enum d_walk_ret (*enter)(void *, struct dentry *))
{
struct dentry *this_parent;
struct list_head *next;
unsigned seq = 0;
enum d_walk_ret ret;
bool retry = true;
again:
read_seqbegin_or_lock(&rename_lock, &seq);
this_parent = parent;
spin_lock(&this_parent->d_lock);
ret = enter(data, this_parent);
switch (ret) {
case D_WALK_CONTINUE:
break;
case D_WALK_QUIT:
case D_WALK_SKIP:
goto out_unlock;
case D_WALK_NORETRY:
retry = false;
break;
}
repeat:
next = this_parent->d_subdirs.next;
resume:
while (next != &this_parent->d_subdirs) {
struct list_head *tmp = next;
struct dentry *dentry = list_entry(tmp, struct dentry, d_child);
next = tmp->next;
if (unlikely(dentry->d_flags & DCACHE_DENTRY_CURSOR))
continue;
spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
ret = enter(data, dentry);
switch (ret) {
case D_WALK_CONTINUE:
break;
case D_WALK_QUIT:
spin_unlock(&dentry->d_lock);
goto out_unlock;
case D_WALK_NORETRY:
retry = false;
break;
case D_WALK_SKIP:
spin_unlock(&dentry->d_lock);
continue;
}
if (!list_empty(&dentry->d_subdirs)) {
spin_unlock(&this_parent->d_lock);
2019-09-19 16:09:40 +00:00
spin_release(&dentry->d_lock.dep_map, _RET_IP_);
this_parent = dentry;
spin_acquire(&this_parent->d_lock.dep_map, 0, 1, _RET_IP_);
goto repeat;
}
spin_unlock(&dentry->d_lock);
}
/*
* All done at this level ... ascend and resume the search.
*/
rcu_read_lock();
ascend:
if (this_parent != parent) {
struct dentry *child = this_parent;
this_parent = child->d_parent;
spin_unlock(&child->d_lock);
spin_lock(&this_parent->d_lock);
/* might go back up the wrong parent if we have had a rename. */
if (need_seqretry(&rename_lock, seq))
goto rename_retry;
/* go into the first sibling still alive */
do {
next = child->d_child.next;
if (next == &this_parent->d_subdirs)
goto ascend;
child = list_entry(next, struct dentry, d_child);
} while (unlikely(child->d_flags & DCACHE_DENTRY_KILLED));
rcu_read_unlock();
goto resume;
}
if (need_seqretry(&rename_lock, seq))
goto rename_retry;
rcu_read_unlock();
out_unlock:
spin_unlock(&this_parent->d_lock);
done_seqretry(&rename_lock, seq);
return;
rename_retry:
spin_unlock(&this_parent->d_lock);
rcu_read_unlock();
BUG_ON(seq & 1);
if (!retry)
return;
seq = 1;
goto again;
}
struct check_mount {
struct vfsmount *mnt;
unsigned int mounted;
};
static enum d_walk_ret path_check_mount(void *data, struct dentry *dentry)
{
struct check_mount *info = data;
struct path path = { .mnt = info->mnt, .dentry = dentry };
if (likely(!d_mountpoint(dentry)))
return D_WALK_CONTINUE;
if (__path_is_mountpoint(&path)) {
info->mounted = 1;
return D_WALK_QUIT;
}
return D_WALK_CONTINUE;
}
/**
* path_has_submounts - check for mounts over a dentry in the
* current namespace.
* @parent: path to check.
*
* Return true if the parent or its subdirectories contain
* a mount point in the current namespace.
*/
int path_has_submounts(const struct path *parent)
{
struct check_mount data = { .mnt = parent->mnt, .mounted = 0 };
read_seqlock_excl(&mount_lock);
d_walk(parent->dentry, &data, path_check_mount);
read_sequnlock_excl(&mount_lock);
return data.mounted;
}
EXPORT_SYMBOL(path_has_submounts);
/*
* Called by mount code to set a mountpoint and check if the mountpoint is
* reachable (e.g. NFS can unhash a directory dentry and then the complete
* subtree can become unreachable).
*
* Only one of d_invalidate() and d_set_mounted() must succeed. For
* this reason take rename_lock and d_lock on dentry and ancestors.
*/
int d_set_mounted(struct dentry *dentry)
{
struct dentry *p;
int ret = -ENOENT;
write_seqlock(&rename_lock);
for (p = dentry->d_parent; !IS_ROOT(p); p = p->d_parent) {
/* Need exclusion wrt. d_invalidate() */
spin_lock(&p->d_lock);
if (unlikely(d_unhashed(p))) {
spin_unlock(&p->d_lock);
goto out;
}
spin_unlock(&p->d_lock);
}
spin_lock(&dentry->d_lock);
if (!d_unlinked(dentry)) {
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
ret = -EBUSY;
if (!d_mountpoint(dentry)) {
dentry->d_flags |= DCACHE_MOUNTED;
ret = 0;
}
}
spin_unlock(&dentry->d_lock);
out:
write_sequnlock(&rename_lock);
return ret;
}
/*
* Search the dentry child list of the specified parent,
* and move any unused dentries to the end of the unused
* list for prune_dcache(). We descend to the next level
* whenever the d_subdirs list is non-empty and continue
* searching.
*
* It returns zero iff there are no unused children,
* otherwise it returns the number of children moved to
* the end of the unused list. This may not be the total
* number of unused children, because select_parent can
* drop the lock and return early due to latency
* constraints.
*/
struct select_data {
struct dentry *start;
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists Currently, running into a shrink list that contains dentries from different filesystems can cause several unpleasant things for shrink_dcache_parent() and for umount(2). The first problem is that there's a window during shrink_dentry_list() between __dentry_kill() takes a victim out and dropping reference to its parent. During that window the parent looks like a genuine busy dentry. shrink_dcache_parent() (or, worse yet, shrink_dcache_for_umount()) coming at that time will see no eviction candidates and no indication that it needs to wait for some shrink_dentry_list() to proceed further. That applies for any shrink list that might intersect with the subtree we are trying to shrink; the only reason it does not blow on umount(2) in the mainline is that we unregister the memory shrinker before hitting shrink_dcache_for_umount(). Another problem happens if something in a mixed-filesystem shrink list gets be stuck in e.g. iput(), getting umount of unrelated fs to spin waiting for the stuck shrinker to get around to our dentries. Solution: 1) have shrink_dentry_list() decrement the parent's refcount and make sure it's on a shrink list (ours unless it already had been on some other) before calling __dentry_kill(). That eliminates the window when shrink_dcache_parent() would've blown past the entire subtree without noticing anything with zero refcount not on shrink lists. 2) when shrink_dcache_parent() has found no eviction candidates, but some dentries are still sitting on shrink lists, rather than repeating the scan in hope that shrinkers have progressed, scan looking for something on shrink lists with zero refcount. If such a thing is found, grab rcu_read_lock() and stop the scan, with caller locking it for eviction, dropping out of RCU and doing __dentry_kill(), with the same treatment for parent as shrink_dentry_list() would do. Note that right now mixed-filesystem shrink lists do not occur, so this is not a mainline bug. Howevere, there's a bunch of uses for such beasts (e.g. the "try and evict everything we can out of given page" patches; there are potential uses in mount-related code, considerably simplifying the life in fs/namespace.c, etc.) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-06-29 22:31:24 +00:00
union {
long found;
struct dentry *victim;
};
struct list_head dispose;
};
static enum d_walk_ret select_collect(void *_data, struct dentry *dentry)
{
struct select_data *data = _data;
enum d_walk_ret ret = D_WALK_CONTINUE;
if (data->start == dentry)
goto out;
if (dentry->d_flags & DCACHE_SHRINK_LIST) {
data->found++;
} else {
if (dentry->d_flags & DCACHE_LRU_LIST)
d_lru_del(dentry);
if (!dentry->d_lockref.count) {
d_shrink_add(dentry, &data->dispose);
data->found++;
}
}
/*
* We can return to the caller if we have found some (this
* ensures forward progress). We'll be coming back to find
* the rest.
*/
if (!list_empty(&data->dispose))
ret = need_resched() ? D_WALK_QUIT : D_WALK_NORETRY;
out:
return ret;
}
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists Currently, running into a shrink list that contains dentries from different filesystems can cause several unpleasant things for shrink_dcache_parent() and for umount(2). The first problem is that there's a window during shrink_dentry_list() between __dentry_kill() takes a victim out and dropping reference to its parent. During that window the parent looks like a genuine busy dentry. shrink_dcache_parent() (or, worse yet, shrink_dcache_for_umount()) coming at that time will see no eviction candidates and no indication that it needs to wait for some shrink_dentry_list() to proceed further. That applies for any shrink list that might intersect with the subtree we are trying to shrink; the only reason it does not blow on umount(2) in the mainline is that we unregister the memory shrinker before hitting shrink_dcache_for_umount(). Another problem happens if something in a mixed-filesystem shrink list gets be stuck in e.g. iput(), getting umount of unrelated fs to spin waiting for the stuck shrinker to get around to our dentries. Solution: 1) have shrink_dentry_list() decrement the parent's refcount and make sure it's on a shrink list (ours unless it already had been on some other) before calling __dentry_kill(). That eliminates the window when shrink_dcache_parent() would've blown past the entire subtree without noticing anything with zero refcount not on shrink lists. 2) when shrink_dcache_parent() has found no eviction candidates, but some dentries are still sitting on shrink lists, rather than repeating the scan in hope that shrinkers have progressed, scan looking for something on shrink lists with zero refcount. If such a thing is found, grab rcu_read_lock() and stop the scan, with caller locking it for eviction, dropping out of RCU and doing __dentry_kill(), with the same treatment for parent as shrink_dentry_list() would do. Note that right now mixed-filesystem shrink lists do not occur, so this is not a mainline bug. Howevere, there's a bunch of uses for such beasts (e.g. the "try and evict everything we can out of given page" patches; there are potential uses in mount-related code, considerably simplifying the life in fs/namespace.c, etc.) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-06-29 22:31:24 +00:00
static enum d_walk_ret select_collect2(void *_data, struct dentry *dentry)
{
struct select_data *data = _data;
enum d_walk_ret ret = D_WALK_CONTINUE;
if (data->start == dentry)
goto out;
if (dentry->d_flags & DCACHE_SHRINK_LIST) {
if (!dentry->d_lockref.count) {
rcu_read_lock();
data->victim = dentry;
return D_WALK_QUIT;
}
} else {
if (dentry->d_flags & DCACHE_LRU_LIST)
d_lru_del(dentry);
if (!dentry->d_lockref.count)
d_shrink_add(dentry, &data->dispose);
}
/*
* We can return to the caller if we have found some (this
* ensures forward progress). We'll be coming back to find
* the rest.
*/
if (!list_empty(&data->dispose))
ret = need_resched() ? D_WALK_QUIT : D_WALK_NORETRY;
out:
return ret;
}
/**
* shrink_dcache_parent - prune dcache
* @parent: parent of entries to prune
*
* Prune the dcache to remove unused children of the parent dentry.
*/
void shrink_dcache_parent(struct dentry *parent)
{
for (;;) {
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists Currently, running into a shrink list that contains dentries from different filesystems can cause several unpleasant things for shrink_dcache_parent() and for umount(2). The first problem is that there's a window during shrink_dentry_list() between __dentry_kill() takes a victim out and dropping reference to its parent. During that window the parent looks like a genuine busy dentry. shrink_dcache_parent() (or, worse yet, shrink_dcache_for_umount()) coming at that time will see no eviction candidates and no indication that it needs to wait for some shrink_dentry_list() to proceed further. That applies for any shrink list that might intersect with the subtree we are trying to shrink; the only reason it does not blow on umount(2) in the mainline is that we unregister the memory shrinker before hitting shrink_dcache_for_umount(). Another problem happens if something in a mixed-filesystem shrink list gets be stuck in e.g. iput(), getting umount of unrelated fs to spin waiting for the stuck shrinker to get around to our dentries. Solution: 1) have shrink_dentry_list() decrement the parent's refcount and make sure it's on a shrink list (ours unless it already had been on some other) before calling __dentry_kill(). That eliminates the window when shrink_dcache_parent() would've blown past the entire subtree without noticing anything with zero refcount not on shrink lists. 2) when shrink_dcache_parent() has found no eviction candidates, but some dentries are still sitting on shrink lists, rather than repeating the scan in hope that shrinkers have progressed, scan looking for something on shrink lists with zero refcount. If such a thing is found, grab rcu_read_lock() and stop the scan, with caller locking it for eviction, dropping out of RCU and doing __dentry_kill(), with the same treatment for parent as shrink_dentry_list() would do. Note that right now mixed-filesystem shrink lists do not occur, so this is not a mainline bug. Howevere, there's a bunch of uses for such beasts (e.g. the "try and evict everything we can out of given page" patches; there are potential uses in mount-related code, considerably simplifying the life in fs/namespace.c, etc.) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-06-29 22:31:24 +00:00
struct select_data data = {.start = parent};
INIT_LIST_HEAD(&data.dispose);
d_walk(parent, &data, select_collect);
if (!list_empty(&data.dispose)) {
shrink_dentry_list(&data.dispose);
continue;
}
cond_resched();
if (!data.found)
break;
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists Currently, running into a shrink list that contains dentries from different filesystems can cause several unpleasant things for shrink_dcache_parent() and for umount(2). The first problem is that there's a window during shrink_dentry_list() between __dentry_kill() takes a victim out and dropping reference to its parent. During that window the parent looks like a genuine busy dentry. shrink_dcache_parent() (or, worse yet, shrink_dcache_for_umount()) coming at that time will see no eviction candidates and no indication that it needs to wait for some shrink_dentry_list() to proceed further. That applies for any shrink list that might intersect with the subtree we are trying to shrink; the only reason it does not blow on umount(2) in the mainline is that we unregister the memory shrinker before hitting shrink_dcache_for_umount(). Another problem happens if something in a mixed-filesystem shrink list gets be stuck in e.g. iput(), getting umount of unrelated fs to spin waiting for the stuck shrinker to get around to our dentries. Solution: 1) have shrink_dentry_list() decrement the parent's refcount and make sure it's on a shrink list (ours unless it already had been on some other) before calling __dentry_kill(). That eliminates the window when shrink_dcache_parent() would've blown past the entire subtree without noticing anything with zero refcount not on shrink lists. 2) when shrink_dcache_parent() has found no eviction candidates, but some dentries are still sitting on shrink lists, rather than repeating the scan in hope that shrinkers have progressed, scan looking for something on shrink lists with zero refcount. If such a thing is found, grab rcu_read_lock() and stop the scan, with caller locking it for eviction, dropping out of RCU and doing __dentry_kill(), with the same treatment for parent as shrink_dentry_list() would do. Note that right now mixed-filesystem shrink lists do not occur, so this is not a mainline bug. Howevere, there's a bunch of uses for such beasts (e.g. the "try and evict everything we can out of given page" patches; there are potential uses in mount-related code, considerably simplifying the life in fs/namespace.c, etc.) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-06-29 22:31:24 +00:00
data.victim = NULL;
d_walk(parent, &data, select_collect2);
if (data.victim) {
struct dentry *parent;
spin_lock(&data.victim->d_lock);
if (!shrink_lock_dentry(data.victim)) {
spin_unlock(&data.victim->d_lock);
rcu_read_unlock();
} else {
rcu_read_unlock();
parent = data.victim->d_parent;
if (parent != data.victim)
__dput_to_list(parent, &data.dispose);
__dentry_kill(data.victim);
}
}
if (!list_empty(&data.dispose))
shrink_dentry_list(&data.dispose);
fs/dcache.c: add cond_resched() to shrink_dcache_parent() Call cond_resched() in shrink_dcache_parent() to maintain interactivity. Before this patch: void shrink_dcache_parent(struct dentry * parent) { while ((found = select_parent(parent, &dispose)) != 0) shrink_dentry_list(&dispose); } select_parent() populates the dispose list with dentries which shrink_dentry_list() then deletes. select_parent() carefully uses need_resched() to avoid doing too much work at once. But neither shrink_dcache_parent() nor its called functions call cond_resched(). So once need_resched() is set select_parent() will return single dentry dispose list which is then deleted by shrink_dentry_list(). This is inefficient when there are a lot of dentry to process. This can cause softlockup and hurts interactivity on non preemptable kernels. This change adds cond_resched() in shrink_dcache_parent(). The benefit of this is that need_resched() is quickly cleared so that future calls to select_parent() are able to efficiently return a big batch of dentry. These additional cond_resched() do not seem to impact performance, at least for the workload below. Here is a program which can cause soft lockup if other system activity sets need_resched(). int main() { struct rlimit rlim; int i; int f[100000]; char buf[20]; struct timeval t1, t2; double diff; /* cleanup past run */ system("rm -rf x"); /* boost nfile rlimit */ rlim.rlim_cur = 200000; rlim.rlim_max = 200000; if (setrlimit(RLIMIT_NOFILE, &rlim)) err(1, "setrlimit"); /* make directory for files */ if (mkdir("x", 0700)) err(1, "mkdir"); if (gettimeofday(&t1, NULL)) err(1, "gettimeofday"); /* populate directory with open files */ for (i = 0; i < 100000; i++) { snprintf(buf, sizeof(buf), "x/%d", i); f[i] = open(buf, O_CREAT); if (f[i] == -1) err(1, "open"); } /* close some of the files */ for (i = 0; i < 85000; i++) close(f[i]); /* unlink all files, even open ones */ system("rm -rf x"); if (gettimeofday(&t2, NULL)) err(1, "gettimeofday"); diff = (((double)t2.tv_sec * 1000000 + t2.tv_usec) - ((double)t1.tv_sec * 1000000 + t1.tv_usec)); printf("done: %g elapsed\n", diff/1e6); return 0; } Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 22:26:48 +00:00
}
}
EXPORT_SYMBOL(shrink_dcache_parent);
static enum d_walk_ret umount_check(void *_data, struct dentry *dentry)
{
/* it has busy descendents; complain about those instead */
if (!list_empty(&dentry->d_subdirs))
return D_WALK_CONTINUE;
/* root with refcount 1 is fine */
if (dentry == _data && dentry->d_lockref.count == 1)
return D_WALK_CONTINUE;
printk(KERN_ERR "BUG: Dentry %p{i=%lx,n=%pd} "
" still in use (%d) [unmount of %s %s]\n",
dentry,
dentry->d_inode ?
dentry->d_inode->i_ino : 0UL,
dentry,
dentry->d_lockref.count,
dentry->d_sb->s_type->name,
dentry->d_sb->s_id);
WARN_ON(1);
return D_WALK_CONTINUE;
}
static void do_one_tree(struct dentry *dentry)
{
shrink_dcache_parent(dentry);
d_walk(dentry, dentry, umount_check);
d_drop(dentry);
dput(dentry);
}
/*
* destroy the dentries attached to a superblock on unmounting
*/
void shrink_dcache_for_umount(struct super_block *sb)
{
struct dentry *dentry;
WARN(down_read_trylock(&sb->s_umount), "s_umount should've been locked");
dentry = sb->s_root;
sb->s_root = NULL;
do_one_tree(dentry);
VFS: don't keep disconnected dentries on d_anon The original purpose of the per-superblock d_anon list was to keep disconnected dentries in the cache between consecutive requests to the NFS server. Dentries can be disconnected if a client holds a file open and repeatedly performs IO on it, and if the server drops the dentry, whether due to memory pressure, server restart, or "echo 3 > /proc/sys/vm/drop_caches". This purpose was thwarted by commit 75a6f82a0d10 ("freeing unlinked file indefinitely delayed") which caused disconnected dentries to be freed as soon as their refcount reached zero. This means that, when a dentry being used by nfsd gets disconnected, a new one needs to be allocated for every request (unless requests overlap). As the dentry has no name, no parent, and no children, there is little of value to cache. As small memory allocations are typically fast (from per-cpu free lists) this likely has little cost. This means that the original purpose of s_anon is no longer relevant: there is no longer any need to keep disconnected dentries on a list so they appear to be hashed. However, s_anon now has a new use. When you mount an NFS filesystem, the dentry stored in s_root is just a placebo. The "real" root dentry is allocated using d_obtain_root() and so it kept on the s_anon list. I don't know the reason for this, but suspect it related to NFSv4 where a mount of "server:/some/path" require NFS to look up the root filehandle on the server, then walk down "/some" and "/path" to get the filehandle to mount. Whatever the reason, NFS depends on the s_anon list and on shrink_dcache_for_umount() pruning all dentries on this list. So we cannot simply remove s_anon. We could just leave the code unchanged, but apart from that being potentially confusing, the (unfair) bit-spin-lock which protects s_anon can become a bottle neck when lots of disconnected dentries are being created. So this patch renames s_anon to s_roots, and stops storing disconnected dentries on the list. Only dentries obtained with d_obtain_root() are now stored on this list. There are many fewer of these (only NFS and NILFS2 use the call, and only during filesystem mount) so contention on the bit-lock will not be a problem. Possibly an alternate solution should be found for NFS and NILFS2, but that would require understanding their needs first. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-20 22:45:40 +00:00
while (!hlist_bl_empty(&sb->s_roots)) {
dentry = dget(hlist_bl_entry(hlist_bl_first(&sb->s_roots), struct dentry, d_hash));
do_one_tree(dentry);
}
}
static enum d_walk_ret find_submount(void *_data, struct dentry *dentry)
{
struct dentry **victim = _data;
if (d_mountpoint(dentry)) {
vfs: Lazily remove mounts on unlinked files and directories. With the introduction of mount namespaces and bind mounts it became possible to access files and directories that on some paths are mount points but are not mount points on other paths. It is very confusing when rm -rf somedir returns -EBUSY simply because somedir is mounted somewhere else. With the addition of user namespaces allowing unprivileged mounts this condition has gone from annoying to allowing a DOS attack on other users in the system. The possibility for mischief is removed by updating the vfs to support rename, unlink and rmdir on a dentry that is a mountpoint and by lazily unmounting mountpoints on deleted dentries. In particular this change allows rename, unlink and rmdir system calls on a dentry without a mountpoint in the current mount namespace to succeed, and it allows rename, unlink, and rmdir performed on a distributed filesystem to update the vfs cache even if when there is a mount in some namespace on the original dentry. There are two common patterns of maintaining mounts: Mounts on trusted paths with the parent directory of the mount point and all ancestory directories up to / owned by root and modifiable only by root (i.e. /media/xxx, /dev, /dev/pts, /proc, /sys, /sys/fs/cgroup/{cpu, cpuacct, ...}, /usr, /usr/local). Mounts on unprivileged directories maintained by fusermount. In the case of mounts in trusted directories owned by root and modifiable only by root the current parent directory permissions are sufficient to ensure a mount point on a trusted path is not removed or renamed by anyone other than root, even if there is a context where the there are no mount points to prevent this. In the case of mounts in directories owned by less privileged users races with users modifying the path of a mount point are already a danger. fusermount already uses a combination of chdir, /proc/<pid>/fd/NNN, and UMOUNT_NOFOLLOW to prevent these races. The removable of global rename, unlink, and rmdir protection really adds nothing new to consider only a widening of the attack window, and fusermount is already safe against unprivileged users modifying the directory simultaneously. In principle for perfect userspace programs returning -EBUSY for unlink, rmdir, and rename of dentires that have mounts in the local namespace is actually unnecessary. Unfortunately not all userspace programs are perfect so retaining -EBUSY for unlink, rmdir and rename of dentries that have mounts in the current mount namespace plays an important role of maintaining consistency with historical behavior and making imperfect userspace applications hard to exploit. v2: Remove spurious old_dentry. v3: Optimized shrink_submounts_and_drop Removed unsued afs label v4: Simplified the changes to check_submounts_and_drop Do not rename check_submounts_and_drop shrink_submounts_and_drop Document what why we need atomicity in check_submounts_and_drop Rely on the parent inode mutex to make d_revalidate and d_invalidate an atomic unit. v5: Refcount the mountpoint to detach in case of simultaneous renames. Reviewed-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-02 01:33:48 +00:00
__dget_dlock(dentry);
*victim = dentry;
return D_WALK_QUIT;
}
return D_WALK_CONTINUE;
}
/**
* d_invalidate - detach submounts, prune dcache, and drop
* @dentry: dentry to invalidate (aka detach, prune and drop)
*/
void d_invalidate(struct dentry *dentry)
{
bool had_submounts = false;
spin_lock(&dentry->d_lock);
if (d_unhashed(dentry)) {
spin_unlock(&dentry->d_lock);
return;
}
__d_drop(dentry);
spin_unlock(&dentry->d_lock);
/* Negative dentries can be dropped without further checks */
if (!dentry->d_inode)
return;
shrink_dcache_parent(dentry);
for (;;) {
struct dentry *victim = NULL;
d_walk(dentry, &victim, find_submount);
if (!victim) {
if (had_submounts)
shrink_dcache_parent(dentry);
return;
vfs: Lazily remove mounts on unlinked files and directories. With the introduction of mount namespaces and bind mounts it became possible to access files and directories that on some paths are mount points but are not mount points on other paths. It is very confusing when rm -rf somedir returns -EBUSY simply because somedir is mounted somewhere else. With the addition of user namespaces allowing unprivileged mounts this condition has gone from annoying to allowing a DOS attack on other users in the system. The possibility for mischief is removed by updating the vfs to support rename, unlink and rmdir on a dentry that is a mountpoint and by lazily unmounting mountpoints on deleted dentries. In particular this change allows rename, unlink and rmdir system calls on a dentry without a mountpoint in the current mount namespace to succeed, and it allows rename, unlink, and rmdir performed on a distributed filesystem to update the vfs cache even if when there is a mount in some namespace on the original dentry. There are two common patterns of maintaining mounts: Mounts on trusted paths with the parent directory of the mount point and all ancestory directories up to / owned by root and modifiable only by root (i.e. /media/xxx, /dev, /dev/pts, /proc, /sys, /sys/fs/cgroup/{cpu, cpuacct, ...}, /usr, /usr/local). Mounts on unprivileged directories maintained by fusermount. In the case of mounts in trusted directories owned by root and modifiable only by root the current parent directory permissions are sufficient to ensure a mount point on a trusted path is not removed or renamed by anyone other than root, even if there is a context where the there are no mount points to prevent this. In the case of mounts in directories owned by less privileged users races with users modifying the path of a mount point are already a danger. fusermount already uses a combination of chdir, /proc/<pid>/fd/NNN, and UMOUNT_NOFOLLOW to prevent these races. The removable of global rename, unlink, and rmdir protection really adds nothing new to consider only a widening of the attack window, and fusermount is already safe against unprivileged users modifying the directory simultaneously. In principle for perfect userspace programs returning -EBUSY for unlink, rmdir, and rename of dentires that have mounts in the local namespace is actually unnecessary. Unfortunately not all userspace programs are perfect so retaining -EBUSY for unlink, rmdir and rename of dentries that have mounts in the current mount namespace plays an important role of maintaining consistency with historical behavior and making imperfect userspace applications hard to exploit. v2: Remove spurious old_dentry. v3: Optimized shrink_submounts_and_drop Removed unsued afs label v4: Simplified the changes to check_submounts_and_drop Do not rename check_submounts_and_drop shrink_submounts_and_drop Document what why we need atomicity in check_submounts_and_drop Rely on the parent inode mutex to make d_revalidate and d_invalidate an atomic unit. v5: Refcount the mountpoint to detach in case of simultaneous renames. Reviewed-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-02 01:33:48 +00:00
}
had_submounts = true;
detach_mounts(victim);
dput(victim);
}
}
EXPORT_SYMBOL(d_invalidate);
/**
* __d_alloc - allocate a dcache entry
* @sb: filesystem it will belong to
* @name: qstr of the name
*
* Allocates a dentry. It returns %NULL if there is insufficient memory
* available. On a success the dentry is returned. The name passed in is
* copied and the copy passed in may be reused after this call.
*/
static struct dentry *__d_alloc(struct super_block *sb, const struct qstr *name)
{
struct dentry *dentry;
char *dname;
int err;
dentry = kmem_cache_alloc(dentry_cache, GFP_KERNEL);
if (!dentry)
return NULL;
2012-05-21 23:14:04 +00:00
/*
* We guarantee that the inline name is always NUL-terminated.
* This way the memcpy() done by the name switching in rename
* will still always have a NUL at the end, even if we might
* be overwriting an internal NUL character
*/
dentry->d_iname[DNAME_INLINE_LEN-1] = 0;
if (unlikely(!name)) {
name = &slash_name;
dname = dentry->d_iname;
} else if (name->len > DNAME_INLINE_LEN-1) {
Allow sharing external names after __d_move() * external dentry names get a small structure prepended to them (struct external_name). * it contains an atomic refcount, matching the number of struct dentry instances that have ->d_name.name pointing to that external name. The first thing free_dentry() does is decrementing refcount of external name, so the instances that are between the call of free_dentry() and RCU-delayed actual freeing do not contribute. * __d_move(x, y, false) makes the name of x equal to the name of y, external or not. If y has an external name, extra reference is grabbed and put into x->d_name.name. If x used to have an external name, the reference to the old name is dropped and, should it reach zero, freeing is scheduled via kfree_rcu(). * free_dentry() in dentry with external name decrements the refcount of that name and, should it reach zero, does RCU-delayed call that will free both the dentry and external name. Otherwise it does what it used to do, except that __d_free() doesn't even look at ->d_name.name; it simply frees the dentry. All non-RCU accesses to dentry external name are safe wrt freeing since they all should happen before free_dentry() is called. RCU accesses might run into a dentry seen by free_dentry() or into an old name that got already dropped by __d_move(); however, in both cases dentry must have been alive and refer to that name at some point after we'd done rcu_read_lock(), which means that any freeing must be still pending. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-29 18:54:27 +00:00
size_t size = offsetof(struct external_name, name[1]);
struct external_name *p = kmalloc(size + name->len,
GFP_KERNEL_ACCOUNT |
__GFP_RECLAIMABLE);
if (!p) {
kmem_cache_free(dentry_cache, dentry);
return NULL;
}
atomic_set(&p->u.count, 1);
dname = p->name;
} else {
dname = dentry->d_iname;
}
dentry->d_name.len = name->len;
dentry->d_name.hash = name->hash;
memcpy(dname, name->name, name->len);
dname[name->len] = 0;
2012-05-21 23:14:04 +00:00
/* Make sure we always see the terminating NUL character */
smp_store_release(&dentry->d_name.name, dname); /* ^^^ */
2012-05-21 23:14:04 +00:00
dentry->d_lockref.count = 1;
vfs: get rid of insane dentry hashing rules The dentry hashing rules have been really quite complicated for a long while, in odd ways. That made functions like __d_drop() very fragile and non-obvious. In particular, whether a dentry was hashed or not was indicated with an explicit DCACHE_UNHASHED bit. That's despite the fact that the hash abstraction that the dentries use actually have a 'is this entry hashed or not' model (which is a simple test of the 'pprev' pointer). The reason that was done is because we used the normal 'is this entry unhashed' model to mark whether the dentry had _ever_ been hashed in the dentry hash tables, and that logic goes back many years (commit b3423415fbc2: "dcache: avoid RCU for never-hashed dentries"). That, in turn, meant that __d_drop had totally different unhashing logic for the dentry hash table case and for the anonymous dcache case, because in order to use the "is this dentry hashed" logic as a flag for whether it had ever been on the RCU hash table, we had to unhash such a dentry differently so that we'd never think that it wasn't 'unhashed' and wouldn't be free'd correctly. That's just insane. It made the logic really hard to follow, when there were two different kinds of "unhashed" states, and one of them (the one that used "list_bl_unhashed()") really had nothing at all to do with being unhashed per se, but with a very subtle lifetime rule instead. So turn all of it around, and make it logical. Instead of having a DENTRY_UNHASHED bit in d_flags to indicate whether the dentry is on the hash chains or not, use the hash chain unhashed logic for that. Suddenly "d_unhashed()" just uses "list_bl_unhashed()", and everything makes sense. And for the lifetime rule, just use an explicit DENTRY_RCUACCEES bit. If we ever insert the dentry into the dentry hash table so that it is visible to RCU lookup, we mark it DENTRY_RCUACCESS to show that it now needs the RCU lifetime rules. Now suddently that test at dentry free time makes sense too. And because unhashing now is sane and doesn't depend on where the dentry got unhashed from (because the dentry hash chain details doesn't have some subtle side effects), we can re-unify the __d_drop() logic and use common code for the unhashing. Also fix one more open-coded hash chain bit_spin_lock() that I missed in the previous chain locking cleanup commit. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-24 14:58:46 +00:00
dentry->d_flags = 0;
spin_lock_init(&dentry->d_lock);
seqcount_spinlock_init(&dentry->d_seq, &dentry->d_lock);
dentry->d_inode = NULL;
dentry->d_parent = dentry;
dentry->d_sb = sb;
dentry->d_op = NULL;
dentry->d_fsdata = NULL;
INIT_HLIST_BL_NODE(&dentry->d_hash);
INIT_LIST_HEAD(&dentry->d_lru);
INIT_LIST_HEAD(&dentry->d_subdirs);
INIT_HLIST_NODE(&dentry->d_u.d_alias);
INIT_LIST_HEAD(&dentry->d_child);
d_set_d_op(dentry, dentry->d_sb->s_d_op);
if (dentry->d_op && dentry->d_op->d_init) {
err = dentry->d_op->d_init(dentry);
if (err) {
if (dname_external(dentry))
kfree(external_name(dentry));
kmem_cache_free(dentry_cache, dentry);
return NULL;
}
}
fs: use fast counters for vfs caches percpu_counter library generates quite nasty code, so unless you need to dynamically allocate counters or take fast approximate value, a simple per cpu set of counters is much better. The percpu_counter can never be made to work as well, because it has an indirection from pointer to percpu memory, and it can't use direct this_cpu_inc interfaces because it doesn't use static PER_CPU data, so code will always be worse. In the fastpath, it is the difference between this: incl %gs:nr_dentry # nr_dentry and this: movl percpu_counter_batch(%rip), %edx # percpu_counter_batch, movl $1, %esi #, movq $nr_dentry, %rdi #, call __percpu_counter_add # (plus I clobber registers) __percpu_counter_add: pushq %rbp # movq %rsp, %rbp #, subq $32, %rsp #, movq %rbx, -24(%rbp) #, movq %r12, -16(%rbp) #, movq %r13, -8(%rbp) #, movq %rdi, %rbx # fbc, fbc #APP # 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1 movq %gs:kernel_stack,%rax #, pfo_ret__ # 0 "" 2 #NO_APP incl -8124(%rax) # <variable>.preempt_count movq 32(%rdi), %r12 # <variable>.counters, tcp_ptr__ #APP # 78 "lib/percpu_counter.c" 1 add %gs:this_cpu_off, %r12 # this_cpu_off, tcp_ptr__ # 0 "" 2 #NO_APP movslq (%r12),%r13 #* tcp_ptr__, tmp73 movslq %edx,%rax # batch, batch addq %rsi, %r13 # amount, count cmpq %rax, %r13 # batch, count jge .L27 #, negl %edx # tmp76 movslq %edx,%rdx # tmp76, tmp77 cmpq %rdx, %r13 # tmp77, count jg .L28 #, .L27: movq %rbx, %rdi # fbc, call _raw_spin_lock # addq %r13, 8(%rbx) # count, <variable>.count movq %rbx, %rdi # fbc, movl $0, (%r12) #,* tcp_ptr__ call _raw_spin_unlock # .L29: #APP # 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1 movq %gs:kernel_stack,%rax #, pfo_ret__ # 0 "" 2 #NO_APP decl -8124(%rax) # <variable>.preempt_count movq -8136(%rax), %rax #, D.14625 testb $8, %al #, D.14625 jne .L32 #, .L31: movq -24(%rbp), %rbx #, movq -16(%rbp), %r12 #, movq -8(%rbp), %r13 #, leave ret .p2align 4,,10 .p2align 3 .L28: movl %r13d, (%r12) # count,* jmp .L29 # .L32: call preempt_schedule # .p2align 4,,6 jmp .L31 # .size __percpu_counter_add, .-__percpu_counter_add .p2align 4,,15 Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:19 +00:00
this_cpu_inc(nr_dentry);
return dentry;
}
/**
* d_alloc - allocate a dcache entry
* @parent: parent of entry to allocate
* @name: qstr of the name
*
* Allocates a dentry. It returns %NULL if there is insufficient memory
* available. On a success the dentry is returned. The name passed in is
* copied and the copy passed in may be reused after this call.
*/
struct dentry *d_alloc(struct dentry * parent, const struct qstr *name)
{
struct dentry *dentry = __d_alloc(parent->d_sb, name);
if (!dentry)
return NULL;
spin_lock(&parent->d_lock);
/*
* don't need child lock because it is not subject
* to concurrency here
*/
__dget_dlock(parent);
dentry->d_parent = parent;
list_add(&dentry->d_child, &parent->d_subdirs);
spin_unlock(&parent->d_lock);
return dentry;
}
EXPORT_SYMBOL(d_alloc);
struct dentry *d_alloc_anon(struct super_block *sb)
{
return __d_alloc(sb, NULL);
}
EXPORT_SYMBOL(d_alloc_anon);
struct dentry *d_alloc_cursor(struct dentry * parent)
{
struct dentry *dentry = d_alloc_anon(parent->d_sb);
if (dentry) {
dcache: sort the freeing-without-RCU-delay mess for good. For lockless accesses to dentries we don't have pinned we rely (among other things) upon having an RCU delay between dropping the last reference and actually freeing the memory. On the other hand, for things like pipes and sockets we neither do that kind of lockless access, nor want to deal with the overhead of an RCU delay every time a socket gets closed. So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags made sure it would happen. We tried to avoid setting it unless we knew we need it. Unfortunately, that had led to recurring class of bugs, in which we missed the need to set it. We only really need it for dentries that are created by d_alloc_pseudo(), so let's not bother with trying to be smart - just make having an RCU delay the default. The ones that do *not* get it set the replacement flag (DCACHE_NORCU) and we'd better use that sparingly. d_alloc_pseudo() is the only such user right now. FWIW, the race that finally prompted that switch had been between __lock_parent() of immediate subdirectory of what's currently the root of a disconnected tree (e.g. from open-by-handle in progress) racing with d_splice_alias() elsewhere picking another alias for the same inode, either on outright corrupted fs image, or (in case of open-by-handle on NFS) that subdirectory having been just moved on server. It's not easy to hit, so the sky is not falling, but that's not the first race on similar missed cases and the logics for settinf DCACHE_RCUACCESS has gotten ridiculously convoluted. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-16 02:23:19 +00:00
dentry->d_flags |= DCACHE_DENTRY_CURSOR;
dentry->d_parent = dget(parent);
}
return dentry;
}
/**
* d_alloc_pseudo - allocate a dentry (for lookup-less filesystems)
* @sb: the superblock
* @name: qstr of the name
*
* For a filesystem that just pins its dentries in memory and never
* performs lookups at all, return an unhashed IS_ROOT dentry.
dcache: sort the freeing-without-RCU-delay mess for good. For lockless accesses to dentries we don't have pinned we rely (among other things) upon having an RCU delay between dropping the last reference and actually freeing the memory. On the other hand, for things like pipes and sockets we neither do that kind of lockless access, nor want to deal with the overhead of an RCU delay every time a socket gets closed. So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags made sure it would happen. We tried to avoid setting it unless we knew we need it. Unfortunately, that had led to recurring class of bugs, in which we missed the need to set it. We only really need it for dentries that are created by d_alloc_pseudo(), so let's not bother with trying to be smart - just make having an RCU delay the default. The ones that do *not* get it set the replacement flag (DCACHE_NORCU) and we'd better use that sparingly. d_alloc_pseudo() is the only such user right now. FWIW, the race that finally prompted that switch had been between __lock_parent() of immediate subdirectory of what's currently the root of a disconnected tree (e.g. from open-by-handle in progress) racing with d_splice_alias() elsewhere picking another alias for the same inode, either on outright corrupted fs image, or (in case of open-by-handle on NFS) that subdirectory having been just moved on server. It's not easy to hit, so the sky is not falling, but that's not the first race on similar missed cases and the logics for settinf DCACHE_RCUACCESS has gotten ridiculously convoluted. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-16 02:23:19 +00:00
* This is used for pipes, sockets et.al. - the stuff that should
* never be anyone's children or parents. Unlike all other
* dentries, these will not have RCU delay between dropping the
* last reference and freeing them.
*
* The only user is alloc_file_pseudo() and that's what should
* be considered a public interface. Don't use directly.
*/
struct dentry *d_alloc_pseudo(struct super_block *sb, const struct qstr *name)
{
dcache: sort the freeing-without-RCU-delay mess for good. For lockless accesses to dentries we don't have pinned we rely (among other things) upon having an RCU delay between dropping the last reference and actually freeing the memory. On the other hand, for things like pipes and sockets we neither do that kind of lockless access, nor want to deal with the overhead of an RCU delay every time a socket gets closed. So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags made sure it would happen. We tried to avoid setting it unless we knew we need it. Unfortunately, that had led to recurring class of bugs, in which we missed the need to set it. We only really need it for dentries that are created by d_alloc_pseudo(), so let's not bother with trying to be smart - just make having an RCU delay the default. The ones that do *not* get it set the replacement flag (DCACHE_NORCU) and we'd better use that sparingly. d_alloc_pseudo() is the only such user right now. FWIW, the race that finally prompted that switch had been between __lock_parent() of immediate subdirectory of what's currently the root of a disconnected tree (e.g. from open-by-handle in progress) racing with d_splice_alias() elsewhere picking another alias for the same inode, either on outright corrupted fs image, or (in case of open-by-handle on NFS) that subdirectory having been just moved on server. It's not easy to hit, so the sky is not falling, but that's not the first race on similar missed cases and the logics for settinf DCACHE_RCUACCESS has gotten ridiculously convoluted. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-16 02:23:19 +00:00
struct dentry *dentry = __d_alloc(sb, name);
if (likely(dentry))
dentry->d_flags |= DCACHE_NORCU;
return dentry;
}
struct dentry *d_alloc_name(struct dentry *parent, const char *name)
{
struct qstr q;
q.name = name;
q.hash_len = hashlen_string(parent, name);
return d_alloc(parent, &q);
}
EXPORT_SYMBOL(d_alloc_name);
void d_set_d_op(struct dentry *dentry, const struct dentry_operations *op)
{
WARN_ON_ONCE(dentry->d_op);
WARN_ON_ONCE(dentry->d_flags & (DCACHE_OP_HASH |
DCACHE_OP_COMPARE |
DCACHE_OP_REVALIDATE |
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op The following set of operations on a NFS client and server will cause server# mkdir a client# cd a server# mv a a.bak client# sleep 30 # (or whatever the dir attrcache timeout is) client# stat . stat: cannot stat `.': Stale NFS file handle Obviously, we should not be getting an ESTALE error back there since the inode still exists on the server. The problem is that the lookup code will call d_revalidate on the dentry that "." refers to, because NFS has FS_REVAL_DOT set. nfs_lookup_revalidate will see that the parent directory has changed and will try to reverify the dentry by redoing a LOOKUP. That of course fails, so the lookup code returns ESTALE. The problem here is that d_revalidate is really a bad fit for this case. What we really want to know at this point is whether the inode is still good or not, but we don't really care what name it goes by or whether the dcache is still valid. Add a new d_op->d_weak_revalidate operation and have complete_walk call that instead of d_revalidate. The intent there is to allow for a "weaker" d_revalidate that just checks to see whether the inode is still good. This is also gives us an opportunity to kill off the FS_REVAL_DOT special casing. [AV: changed method name, added note in porting, fixed confusion re having it possibly called from RCU mode (it won't be)] Cc: NeilBrown <neilb@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-20 16:19:05 +00:00
DCACHE_OP_WEAK_REVALIDATE |
overlayfs: Make f_path always point to the overlay and f_inode to the underlay Make file->f_path always point to the overlay dentry so that the path in /proc/pid/fd is correct and to ensure that label-based LSMs have access to the overlay as well as the underlay (path-based LSMs probably don't need it). Using my union testsuite to set things up, before the patch I see: [root@andromeda union-testsuite]# bash 5</mnt/a/foo107 [root@andromeda union-testsuite]# ls -l /proc/$$/fd/ ... lr-x------. 1 root root 64 Jun 5 14:38 5 -> /a/foo107 [root@andromeda union-testsuite]# stat /mnt/a/foo107 ... Device: 23h/35d Inode: 13381 Links: 1 ... [root@andromeda union-testsuite]# stat -L /proc/$$/fd/5 ... Device: 23h/35d Inode: 13381 Links: 1 ... After the patch: [root@andromeda union-testsuite]# bash 5</mnt/a/foo107 [root@andromeda union-testsuite]# ls -l /proc/$$/fd/ ... lr-x------. 1 root root 64 Jun 5 14:22 5 -> /mnt/a/foo107 [root@andromeda union-testsuite]# stat /mnt/a/foo107 ... Device: 23h/35d Inode: 40346 Links: 1 ... [root@andromeda union-testsuite]# stat -L /proc/$$/fd/5 ... Device: 23h/35d Inode: 40346 Links: 1 ... Note the change in where /proc/$$/fd/5 points to in the ls command. It was pointing to /a/foo107 (which doesn't exist) and now points to /mnt/a/foo107 (which is correct). The inode accessed, however, is the lower layer. The union layer is on device 25h/37d and the upper layer on 24h/36d. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-06-18 13:32:31 +00:00
DCACHE_OP_DELETE |
DCACHE_OP_REAL));
dentry->d_op = op;
if (!op)
return;
if (op->d_hash)
dentry->d_flags |= DCACHE_OP_HASH;
if (op->d_compare)
dentry->d_flags |= DCACHE_OP_COMPARE;
if (op->d_revalidate)
dentry->d_flags |= DCACHE_OP_REVALIDATE;
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op The following set of operations on a NFS client and server will cause server# mkdir a client# cd a server# mv a a.bak client# sleep 30 # (or whatever the dir attrcache timeout is) client# stat . stat: cannot stat `.': Stale NFS file handle Obviously, we should not be getting an ESTALE error back there since the inode still exists on the server. The problem is that the lookup code will call d_revalidate on the dentry that "." refers to, because NFS has FS_REVAL_DOT set. nfs_lookup_revalidate will see that the parent directory has changed and will try to reverify the dentry by redoing a LOOKUP. That of course fails, so the lookup code returns ESTALE. The problem here is that d_revalidate is really a bad fit for this case. What we really want to know at this point is whether the inode is still good or not, but we don't really care what name it goes by or whether the dcache is still valid. Add a new d_op->d_weak_revalidate operation and have complete_walk call that instead of d_revalidate. The intent there is to allow for a "weaker" d_revalidate that just checks to see whether the inode is still good. This is also gives us an opportunity to kill off the FS_REVAL_DOT special casing. [AV: changed method name, added note in porting, fixed confusion re having it possibly called from RCU mode (it won't be)] Cc: NeilBrown <neilb@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-20 16:19:05 +00:00
if (op->d_weak_revalidate)
dentry->d_flags |= DCACHE_OP_WEAK_REVALIDATE;
if (op->d_delete)
dentry->d_flags |= DCACHE_OP_DELETE;
if (op->d_prune)
dentry->d_flags |= DCACHE_OP_PRUNE;
if (op->d_real)
dentry->d_flags |= DCACHE_OP_REAL;
}
EXPORT_SYMBOL(d_set_d_op);
/*
* d_set_fallthru - Mark a dentry as falling through to a lower layer
* @dentry - The dentry to mark
*
* Mark a dentry as falling through to the lower layer (as set with
* d_pin_lower()). This flag may be recorded on the medium.
*/
void d_set_fallthru(struct dentry *dentry)
{
spin_lock(&dentry->d_lock);
dentry->d_flags |= DCACHE_FALLTHRU;
spin_unlock(&dentry->d_lock);
}
EXPORT_SYMBOL(d_set_fallthru);
static unsigned d_flags_for_inode(struct inode *inode)
{
unsigned add_flags = DCACHE_REGULAR_TYPE;
if (!inode)
return DCACHE_MISS_TYPE;
if (S_ISDIR(inode->i_mode)) {
add_flags = DCACHE_DIRECTORY_TYPE;
if (unlikely(!(inode->i_opflags & IOP_LOOKUP))) {
if (unlikely(!inode->i_op->lookup))
add_flags = DCACHE_AUTODIR_TYPE;
else
inode->i_opflags |= IOP_LOOKUP;
}
goto type_determined;
}
if (unlikely(!(inode->i_opflags & IOP_NOFOLLOW))) {
if (unlikely(inode->i_op->get_link)) {
add_flags = DCACHE_SYMLINK_TYPE;
goto type_determined;
}
inode->i_opflags |= IOP_NOFOLLOW;
}
if (unlikely(!S_ISREG(inode->i_mode)))
add_flags = DCACHE_SPECIAL_TYPE;
type_determined:
if (unlikely(IS_AUTOMOUNT(inode)))
add_flags |= DCACHE_NEED_AUTOMOUNT;
return add_flags;
}
static void __d_instantiate(struct dentry *dentry, struct inode *inode)
{
unsigned add_flags = d_flags_for_inode(inode);
beginning of transition to parallel lookups - marking in-lookup dentries marked as such when (would be) parallel lookup is about to pass them to actual ->lookup(); unmarked when * __d_add() is about to make it hashed, positive or not. * __d_move() (from d_splice_alias(), directly or via __d_unalias()) puts a preexisting dentry in its place * in caller of ->lookup() if it has escaped all of the above. Bug (WARN_ON, actually) if it reaches the final dput() or d_instantiate() while still marked such. As the result, we are guaranteed that for as long as the flag is set, dentry will * remain negative unhashed with positive refcount * never have its ->d_alias looked at * never have its ->d_lru looked at * never have its ->d_parent and ->d_name changed Right now we have at most one such for any given parent directory. With parallel lookups that restriction will weaken to * only exist when parent is locked shared * at most one with given (parent,name) pair (comparison of names is according to ->d_compare()) * only exist when there's no hashed dentry with the same (parent,name) Transition will take the next several commits; unfortunately, we'll only be able to switch to rwsem at the end of this series. The reason for not making it a single patch is to simplify review. New primitives: d_in_lookup() (a predicate checking if dentry is in the in-lookup state) and d_lookup_done() (tells the system that we are done with lookup and if it's still marked as in-lookup, it should cease to be such). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-14 23:52:13 +00:00
WARN_ON(d_in_lookup(dentry));
spin_lock(&dentry->d_lock);
/*
* Decrement negative dentry count if it was in the LRU list.
*/
if (dentry->d_flags & DCACHE_LRU_LIST)
this_cpu_dec(nr_dentry_negative);
hlist_add_head(&dentry->d_u.d_alias, &inode->i_dentry);
raw_write_seqcount_begin(&dentry->d_seq);
__d_set_inode_and_type(dentry, inode, add_flags);
raw_write_seqcount_end(&dentry->d_seq);
fsnotify_update_flags(dentry);
spin_unlock(&dentry->d_lock);
}
/**
* d_instantiate - fill in inode information for a dentry
* @entry: dentry to complete
* @inode: inode to attach to this dentry
*
* Fill in inode information in the entry.
*
* This turns negative dentries into productive full members
* of society.
*
* NOTE! This assumes that the inode count has been incremented
* (or otherwise set) by the caller to indicate that it is now
* in use by the dcache.
*/
void d_instantiate(struct dentry *entry, struct inode * inode)
{
BUG_ON(!hlist_unhashed(&entry->d_u.d_alias));
if (inode) {
security_d_instantiate(entry, inode);
spin_lock(&inode->i_lock);
__d_instantiate(entry, inode);
spin_unlock(&inode->i_lock);
}
}
EXPORT_SYMBOL(d_instantiate);
/*
* This should be equivalent to d_instantiate() + unlock_new_inode(),
* with lockdep-related part of unlock_new_inode() done before
* anything else. Use that instead of open-coding d_instantiate()/
* unlock_new_inode() combinations.
*/
void d_instantiate_new(struct dentry *entry, struct inode *inode)
{
BUG_ON(!hlist_unhashed(&entry->d_u.d_alias));
BUG_ON(!inode);
lockdep_annotate_inode_mutex_key(inode);
security_d_instantiate(entry, inode);
spin_lock(&inode->i_lock);
__d_instantiate(entry, inode);
WARN_ON(!(inode->i_state & I_NEW));
inode->i_state &= ~I_NEW & ~I_CREATING;
smp_mb();
wake_up_bit(&inode->i_state, __I_NEW);
spin_unlock(&inode->i_lock);
}
EXPORT_SYMBOL(d_instantiate_new);
struct dentry *d_make_root(struct inode *root_inode)
{
struct dentry *res = NULL;
if (root_inode) {
res = d_alloc_anon(root_inode->i_sb);
dcache: sort the freeing-without-RCU-delay mess for good. For lockless accesses to dentries we don't have pinned we rely (among other things) upon having an RCU delay between dropping the last reference and actually freeing the memory. On the other hand, for things like pipes and sockets we neither do that kind of lockless access, nor want to deal with the overhead of an RCU delay every time a socket gets closed. So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags made sure it would happen. We tried to avoid setting it unless we knew we need it. Unfortunately, that had led to recurring class of bugs, in which we missed the need to set it. We only really need it for dentries that are created by d_alloc_pseudo(), so let's not bother with trying to be smart - just make having an RCU delay the default. The ones that do *not* get it set the replacement flag (DCACHE_NORCU) and we'd better use that sparingly. d_alloc_pseudo() is the only such user right now. FWIW, the race that finally prompted that switch had been between __lock_parent() of immediate subdirectory of what's currently the root of a disconnected tree (e.g. from open-by-handle in progress) racing with d_splice_alias() elsewhere picking another alias for the same inode, either on outright corrupted fs image, or (in case of open-by-handle on NFS) that subdirectory having been just moved on server. It's not easy to hit, so the sky is not falling, but that's not the first race on similar missed cases and the logics for settinf DCACHE_RCUACCESS has gotten ridiculously convoluted. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-16 02:23:19 +00:00
if (res)
d_instantiate(res, root_inode);
dcache: sort the freeing-without-RCU-delay mess for good. For lockless accesses to dentries we don't have pinned we rely (among other things) upon having an RCU delay between dropping the last reference and actually freeing the memory. On the other hand, for things like pipes and sockets we neither do that kind of lockless access, nor want to deal with the overhead of an RCU delay every time a socket gets closed. So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags made sure it would happen. We tried to avoid setting it unless we knew we need it. Unfortunately, that had led to recurring class of bugs, in which we missed the need to set it. We only really need it for dentries that are created by d_alloc_pseudo(), so let's not bother with trying to be smart - just make having an RCU delay the default. The ones that do *not* get it set the replacement flag (DCACHE_NORCU) and we'd better use that sparingly. d_alloc_pseudo() is the only such user right now. FWIW, the race that finally prompted that switch had been between __lock_parent() of immediate subdirectory of what's currently the root of a disconnected tree (e.g. from open-by-handle in progress) racing with d_splice_alias() elsewhere picking another alias for the same inode, either on outright corrupted fs image, or (in case of open-by-handle on NFS) that subdirectory having been just moved on server. It's not easy to hit, so the sky is not falling, but that's not the first race on similar missed cases and the logics for settinf DCACHE_RCUACCESS has gotten ridiculously convoluted. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-16 02:23:19 +00:00
else
iput(root_inode);
}
return res;
}
EXPORT_SYMBOL(d_make_root);
static struct dentry *__d_instantiate_anon(struct dentry *dentry,
struct inode *inode,
bool disconnected)
{
struct dentry *res;
unsigned add_flags;
security_d_instantiate(dentry, inode);
spin_lock(&inode->i_lock);
fs/dcache: allow d_obtain_alias() to return unhashed dentries Without this patch, inodes are not promptly freed on last close of an unlinked file by an nfs client: client$ mount -tnfs4 server:/export/ /mnt/ client$ tail -f /mnt/FOO ... server$ df -i /export server$ rm /export/FOO (^C the tail -f) server$ df -i /export server$ echo 2 >/proc/sys/vm/drop_caches server$ df -i /export the df's will show that the inode is not freed on the filesystem until the last step, when it could have been freed after killing the client's tail -f. On-disk data won't be deallocated either, leading to possible spurious ENOSPC. This occurs because when the client does the close, it arrives in a compound with a putfh and a close, processed like: - putfh: look up the filehandle.  The only alias found for the inode will be DCACHE_UNHASHED alias referenced by the filp this, so it creates a new DCACHE_DISCONECTED dentry and returns that instead. - close: closes the existing filp, which is destroyed immediately by dput() since it's DCACHE_UNHASHED. - end of the compound: release the reference to the current filehandle, and dput() the new DCACHE_DISCONECTED dentry, which gets put on the unused list instead of being destroyed immediately. Nick Piggin suggested fixing this by allowing d_obtain_alias to return the unhashed dentry that is referenced by the filp, instead of making it create a new dentry. Leave __d_find_alias() alone to avoid changing behavior of other callers. Also nfsd doesn't need all the checks of __d_find_alias(); any dentry, hashed or unhashed, disconnected or not, should work. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-18 20:45:09 +00:00
res = __d_find_any_alias(inode);
if (res) {
spin_unlock(&inode->i_lock);
dput(dentry);
goto out_iput;
}
/* attach a disconnected dentry */
add_flags = d_flags_for_inode(inode);
if (disconnected)
add_flags |= DCACHE_DISCONNECTED;
spin_lock(&dentry->d_lock);
__d_set_inode_and_type(dentry, inode, add_flags);
hlist_add_head(&dentry->d_u.d_alias, &inode->i_dentry);
VFS: don't keep disconnected dentries on d_anon The original purpose of the per-superblock d_anon list was to keep disconnected dentries in the cache between consecutive requests to the NFS server. Dentries can be disconnected if a client holds a file open and repeatedly performs IO on it, and if the server drops the dentry, whether due to memory pressure, server restart, or "echo 3 > /proc/sys/vm/drop_caches". This purpose was thwarted by commit 75a6f82a0d10 ("freeing unlinked file indefinitely delayed") which caused disconnected dentries to be freed as soon as their refcount reached zero. This means that, when a dentry being used by nfsd gets disconnected, a new one needs to be allocated for every request (unless requests overlap). As the dentry has no name, no parent, and no children, there is little of value to cache. As small memory allocations are typically fast (from per-cpu free lists) this likely has little cost. This means that the original purpose of s_anon is no longer relevant: there is no longer any need to keep disconnected dentries on a list so they appear to be hashed. However, s_anon now has a new use. When you mount an NFS filesystem, the dentry stored in s_root is just a placebo. The "real" root dentry is allocated using d_obtain_root() and so it kept on the s_anon list. I don't know the reason for this, but suspect it related to NFSv4 where a mount of "server:/some/path" require NFS to look up the root filehandle on the server, then walk down "/some" and "/path" to get the filehandle to mount. Whatever the reason, NFS depends on the s_anon list and on shrink_dcache_for_umount() pruning all dentries on this list. So we cannot simply remove s_anon. We could just leave the code unchanged, but apart from that being potentially confusing, the (unfair) bit-spin-lock which protects s_anon can become a bottle neck when lots of disconnected dentries are being created. So this patch renames s_anon to s_roots, and stops storing disconnected dentries on the list. Only dentries obtained with d_obtain_root() are now stored on this list. There are many fewer of these (only NFS and NILFS2 use the call, and only during filesystem mount) so contention on the bit-lock will not be a problem. Possibly an alternate solution should be found for NFS and NILFS2, but that would require understanding their needs first. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-20 22:45:40 +00:00
if (!disconnected) {
Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: "This work from Amir adds NFS export capability to overlayfs. NFS exporting an overlay filesystem is a challange because we want to keep track of any copy-up of a file or directory between encoding the file handle and decoding it. This is achieved by indexing copied up objects by lower layer file handle. The index is already used for hard links, this patchset extends the use to NFS file handle decoding" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (51 commits) ovl: check ERR_PTR() return value from ovl_encode_fh() ovl: fix regression in fsnotify of overlay merge dir ovl: wire up NFS export operations ovl: lookup indexed ancestor of lower dir ovl: lookup connected ancestor of dir in inode cache ovl: hash non-indexed dir by upper inode for NFS export ovl: decode pure lower dir file handles ovl: decode indexed dir file handles ovl: decode lower file handles of unlinked but open files ovl: decode indexed non-dir file handles ovl: decode lower non-dir file handles ovl: encode lower file handles ovl: copy up before encoding non-connectable dir file handle ovl: encode non-indexed upper file handles ovl: decode connected upper dir file handles ovl: decode pure upper file handles ovl: encode pure upper file handles ovl: document NFS export vfs: factor out helpers d_instantiate_anon() and d_alloc_anon() ovl: store 'has_upper' and 'opaque' as bit flags ...
2018-02-05 21:05:20 +00:00
hlist_bl_lock(&dentry->d_sb->s_roots);
hlist_bl_add_head(&dentry->d_hash, &dentry->d_sb->s_roots);
hlist_bl_unlock(&dentry->d_sb->s_roots);
VFS: don't keep disconnected dentries on d_anon The original purpose of the per-superblock d_anon list was to keep disconnected dentries in the cache between consecutive requests to the NFS server. Dentries can be disconnected if a client holds a file open and repeatedly performs IO on it, and if the server drops the dentry, whether due to memory pressure, server restart, or "echo 3 > /proc/sys/vm/drop_caches". This purpose was thwarted by commit 75a6f82a0d10 ("freeing unlinked file indefinitely delayed") which caused disconnected dentries to be freed as soon as their refcount reached zero. This means that, when a dentry being used by nfsd gets disconnected, a new one needs to be allocated for every request (unless requests overlap). As the dentry has no name, no parent, and no children, there is little of value to cache. As small memory allocations are typically fast (from per-cpu free lists) this likely has little cost. This means that the original purpose of s_anon is no longer relevant: there is no longer any need to keep disconnected dentries on a list so they appear to be hashed. However, s_anon now has a new use. When you mount an NFS filesystem, the dentry stored in s_root is just a placebo. The "real" root dentry is allocated using d_obtain_root() and so it kept on the s_anon list. I don't know the reason for this, but suspect it related to NFSv4 where a mount of "server:/some/path" require NFS to look up the root filehandle on the server, then walk down "/some" and "/path" to get the filehandle to mount. Whatever the reason, NFS depends on the s_anon list and on shrink_dcache_for_umount() pruning all dentries on this list. So we cannot simply remove s_anon. We could just leave the code unchanged, but apart from that being potentially confusing, the (unfair) bit-spin-lock which protects s_anon can become a bottle neck when lots of disconnected dentries are being created. So this patch renames s_anon to s_roots, and stops storing disconnected dentries on the list. Only dentries obtained with d_obtain_root() are now stored on this list. There are many fewer of these (only NFS and NILFS2 use the call, and only during filesystem mount) so contention on the bit-lock will not be a problem. Possibly an alternate solution should be found for NFS and NILFS2, but that would require understanding their needs first. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-20 22:45:40 +00:00
}
spin_unlock(&dentry->d_lock);
spin_unlock(&inode->i_lock);
return dentry;
out_iput:
iput(inode);
return res;
}
struct dentry *d_instantiate_anon(struct dentry *dentry, struct inode *inode)
{
return __d_instantiate_anon(dentry, inode, true);
}
EXPORT_SYMBOL(d_instantiate_anon);
static struct dentry *__d_obtain_alias(struct inode *inode, bool disconnected)
{
struct dentry *tmp;
struct dentry *res;
if (!inode)
return ERR_PTR(-ESTALE);
if (IS_ERR(inode))
return ERR_CAST(inode);
res = d_find_any_alias(inode);
if (res)
goto out_iput;
tmp = d_alloc_anon(inode->i_sb);
if (!tmp) {
res = ERR_PTR(-ENOMEM);
goto out_iput;
}
return __d_instantiate_anon(tmp, inode, disconnected);
out_iput:
iput(inode);
return res;
}
/**
* d_obtain_alias - find or allocate a DISCONNECTED dentry for a given inode
* @inode: inode to allocate the dentry for
*
* Obtain a dentry for an inode resulting from NFS filehandle conversion or
* similar open by handle operations. The returned dentry may be anonymous,
* or may have a full name (if the inode was already in the cache).
*
* When called on a directory inode, we must ensure that the inode only ever
* has one dentry. If a dentry is found, that is returned instead of
* allocating a new one.
*
* On successful return, the reference to the inode has been transferred
* to the dentry. In case of an error the reference on the inode is released.
* To make it easier to use in export operations a %NULL or IS_ERR inode may
* be passed in and the error will be propagated to the return value,
* with a %NULL @inode replaced by ERR_PTR(-ESTALE).
*/
struct dentry *d_obtain_alias(struct inode *inode)
{
return __d_obtain_alias(inode, true);
}
EXPORT_SYMBOL(d_obtain_alias);
/**
* d_obtain_root - find or allocate a dentry for a given inode
* @inode: inode to allocate the dentry for
*
* Obtain an IS_ROOT dentry for the root of a filesystem.
*
* We must ensure that directory inodes only ever have one dentry. If a
* dentry is found, that is returned instead of allocating a new one.
*
* On successful return, the reference to the inode has been transferred
* to the dentry. In case of an error the reference on the inode is
* released. A %NULL or IS_ERR inode may be passed in and will be the
* error will be propagate to the return value, with a %NULL @inode
* replaced by ERR_PTR(-ESTALE).
*/
struct dentry *d_obtain_root(struct inode *inode)
{
return __d_obtain_alias(inode, false);
}
EXPORT_SYMBOL(d_obtain_root);
/**
* d_add_ci - lookup or allocate new dentry with case-exact name
* @inode: the inode case-insensitive lookup has found
* @dentry: the negative dentry that was passed to the parent's lookup func
* @name: the case-exact name to be associated with the returned dentry
*
* This is to avoid filling the dcache with case-insensitive names to the
* same inode, only the actual correct case is stored in the dcache for
* case-insensitive filesystems.
*
* For a case-insensitive lookup match and if the the case-exact dentry
* already exists in in the dcache, use it and return it.
*
* If no entry exists with the exact case name, allocate new dentry with
* the exact case, and return the spliced entry.
*/
struct dentry *d_add_ci(struct dentry *dentry, struct inode *inode,
struct qstr *name)
{
struct dentry *found, *res;
/*
* First check if a dentry matching the name already exists,
* if not go ahead and create it now.
*/
found = d_hash_and_lookup(dentry->d_parent, name);
if (found) {
iput(inode);
return found;
}
if (d_in_lookup(dentry)) {
found = d_alloc_parallel(dentry->d_parent, name,
dentry->d_wait);
if (IS_ERR(found) || !d_in_lookup(found)) {
iput(inode);
return found;
}
} else {
found = d_alloc(dentry->d_parent, name);
if (!found) {
iput(inode);
return ERR_PTR(-ENOMEM);
}
}
res = d_splice_alias(inode, found);
if (res) {
dput(found);
return res;
}
return found;
}
EXPORT_SYMBOL(d_add_ci);
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
static inline bool d_same_name(const struct dentry *dentry,
const struct dentry *parent,
const struct qstr *name)
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
{
if (likely(!(parent->d_flags & DCACHE_OP_COMPARE))) {
if (dentry->d_name.len != name->len)
return false;
return dentry_cmp(dentry, name->name, name->len) == 0;
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
}
return parent->d_op->d_compare(dentry,
dentry->d_name.len, dentry->d_name.name,
name) == 0;
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
}
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
/**
* __d_lookup_rcu - search for a dentry (racy, store-free)
* @parent: parent dentry
* @name: qstr of name we wish to find
* @seqp: returns d_seq value at the point where the dentry was found
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
* Returns: dentry, or NULL
*
* __d_lookup_rcu is the dcache lookup function for rcu-walk name
* resolution (store-free path walking) design described in
* Documentation/filesystems/path-lookup.txt.
*
* This is not to be used outside core vfs.
*
* __d_lookup_rcu must only be used in rcu-walk mode, ie. with vfsmount lock
* held, and rcu_read_lock held. The returned dentry must not be stored into
* without taking d_lock and checking d_seq sequence count against @seq
* returned here.
*
* A refcount may be taken on the found dentry with the d_rcu_to_refcount
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
* function.
*
* Alternatively, __d_lookup_rcu may be called again to look up the child of
* the returned dentry, so long as its parent's seqlock is checked after the
* child is looked up. Thus, an interlocking stepping of sequence lock checks
* is formed, giving integrity down the path walk.
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
*
* NOTE! The caller *has* to check the resulting dentry against the sequence
* number we've returned before using any of the resulting dentry state!
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
*/
struct dentry *__d_lookup_rcu(const struct dentry *parent,
const struct qstr *name,
unsigned *seqp)
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
{
u64 hashlen = name->hash_len;
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
const unsigned char *str = name->name;
struct hlist_bl_head *b = d_hash(hashlen_hash(hashlen));
struct hlist_bl_node *node;
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
struct dentry *dentry;
/*
* Note: There is significant duplication with __d_lookup_rcu which is
* required to prevent single threaded performance regressions
* especially on architectures where smp_rmb (in seqcounts) are costly.
* Keep the two functions in sync.
*/
/*
* The hash list is protected using RCU.
*
* Carefully use d_seq when comparing a candidate dentry, to avoid
* races with d_move().
*
* It is possible that concurrent renames can mess up our list
* walk here and result in missing our dentry, resulting in the
* false-negative result. d_lookup() protects against concurrent
* renames using rename_lock seqlock.
*
* See Documentation/filesystems/path-lookup.txt for more details.
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
*/
hlist_bl_for_each_entry_rcu(dentry, node, b, d_hash) {
unsigned seq;
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
seqretry:
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
/*
* The dentry sequence count protects us from concurrent
* renames, and thus protects parent and name fields.
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
*
* The caller must perform a seqcount check in order
* to do anything useful with the returned dentry.
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
*
* NOTE! We do a "raw" seqcount_begin here. That means that
* we don't wait for the sequence count to stabilize if it
* is in the middle of a sequence change. If we do the slow
* dentry compare, we will do seqretries until it is stable,
* and if we end up with a successful lookup, we actually
* want to exit RCU lookup anyway.
*
* Note that raw_seqcount_begin still *does* smp_rmb(), so
* we are still guaranteed NUL-termination of ->d_name.name.
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
*/
seq = raw_seqcount_begin(&dentry->d_seq);
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
if (dentry->d_parent != parent)
continue;
if (d_unhashed(dentry))
continue;
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
if (unlikely(parent->d_flags & DCACHE_OP_COMPARE)) {
int tlen;
const char *tname;
if (dentry->d_name.hash != hashlen_hash(hashlen))
continue;
tlen = dentry->d_name.len;
tname = dentry->d_name.name;
/* we want a consistent (name,len) pair */
if (read_seqcount_retry(&dentry->d_seq, seq)) {
cpu_relax();
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces The calling conventions for __d_lookup_rcu() and dentry_cmp() are annoying in different ways, and there is actually one single underlying reason for both of the annoyances. The fundamental reason is that we do the returned dentry sequence number check inside __d_lookup_rcu() instead of doing it in the caller. This results in two annoyances: - __d_lookup_rcu() now not only needs to return the dentry and the sequence number that goes along with the lookup, it also needs to return the inode pointer that was validated by that sequence number check. - and because we did the sequence number check early (to validate the name pointer and length) we also couldn't just pass the dentry itself to dentry_cmp(), we had to pass the counted string that contained the name. So that sequence number decision caused two separate ugly calling conventions. Both of these problems would be solved if we just did the sequence number check in the caller instead. There's only one caller, and that caller already has to do the sequence number check for the parent anyway, so just do that. That allows us to stop returning the dentry->d_inode in that in-out argument (pointer-to-pointer-to-inode), so we can make the inode argument just a regular input inode pointer. The caller can just load the inode from dentry->d_inode, and then do the sequence number check after that to make sure that it's synchronized with the name we looked up. And it allows us to just pass in the dentry to dentry_cmp(), which is what all the callers really wanted. Sure, dentry_cmp() has to be a bit careful about the dentry (which is not stable during RCU lookup), but that's actually very simple. And now that dentry_cmp() can clearly see that the first string argument is a dentry, we can use the direct word access for that, instead of the careful unaligned zero-padding. The dentry name is always properly aligned, since it is a single path component that is either embedded into the dentry itself, or was allocated with kmalloc() (see __d_alloc). Finally, this also uninlines the nasty slow-case for dentry comparisons: that one *does* need to do a sequence number check, since it will call in to the low-level filesystems, and we want to give those a stable inode pointer and path component length/start arguments. Doing an extra sequence check for that slow case is not a problem, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04 21:59:14 +00:00
goto seqretry;
}
if (parent->d_op->d_compare(dentry,
tlen, tname, name) != 0)
continue;
} else {
if (dentry->d_name.hash_len != hashlen)
continue;
if (dentry_cmp(dentry, str, hashlen_len(hashlen)) != 0)
continue;
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
}
*seqp = seq;
return dentry;
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
}
return NULL;
}
/**
* d_lookup - search for a dentry
* @parent: parent dentry
* @name: qstr of name we wish to find
* Returns: dentry, or NULL
*
* d_lookup searches the children of the parent dentry for the name in
* question. If the dentry is found its reference count is incremented and the
* dentry is returned. The caller must use dput to free the entry when it has
* finished using it. %NULL is returned if the dentry does not exist.
*/
struct dentry *d_lookup(const struct dentry *parent, const struct qstr *name)
{
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
struct dentry *dentry;
unsigned seq;
do {
seq = read_seqbegin(&rename_lock);
dentry = __d_lookup(parent, name);
if (dentry)
break;
} while (read_seqretry(&rename_lock, seq));
return dentry;
}
EXPORT_SYMBOL(d_lookup);
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
/**
* __d_lookup - search for a dentry (racy)
* @parent: parent dentry
* @name: qstr of name we wish to find
* Returns: dentry, or NULL
*
* __d_lookup is like d_lookup, however it may (rarely) return a
* false-negative result due to unrelated rename activity.
*
* __d_lookup is slightly faster by avoiding rename_lock read seqlock,
* however it must be used carefully, eg. with a following d_lookup in
* the case of failure.
*
* __d_lookup callers must be commented.
*/
struct dentry *__d_lookup(const struct dentry *parent, const struct qstr *name)
{
unsigned int hash = name->hash;
struct hlist_bl_head *b = d_hash(hash);
struct hlist_bl_node *node;
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
struct dentry *found = NULL;
struct dentry *dentry;
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
/*
* Note: There is significant duplication with __d_lookup_rcu which is
* required to prevent single threaded performance regressions
* especially on architectures where smp_rmb (in seqcounts) are costly.
* Keep the two functions in sync.
*/
/*
* The hash list is protected using RCU.
*
* Take d_lock when comparing a candidate dentry, to avoid races
* with d_move().
*
* It is possible that concurrent renames can mess up our list
* walk here and result in missing our dentry, resulting in the
* false-negative result. d_lookup() protects against concurrent
* renames using rename_lock seqlock.
*
* See Documentation/filesystems/path-lookup.txt for more details.
*/
rcu_read_lock();
hlist_bl_for_each_entry_rcu(dentry, node, b, d_hash) {
if (dentry->d_name.hash != hash)
continue;
spin_lock(&dentry->d_lock);
if (dentry->d_parent != parent)
goto next;
Fix NULL pointer dereference in proc_sys_compare The VFS interface for the 'd_compare()' is a bit special (read: 'odd'), because it really just essentially replaces a memcmp(). The filesystem is supposed to just compare the two names with whatever case-independent or other function. And when I say 'is supposed to', I obviously mean that 'procfs does odd things, and actually looks at the dentry that we don't even pass down, rather than just the name'. Which results in problems, because we actually call d_compare before we have even verified that the dentry is still hashed at all. And that causes a problm since the inode that procfs looks at may have been free'd and the d_inode pointer is NULL. procfs just assumes that all dentries are positive, since procfs itself never generates a negative one. But memory pressure will still result in the dentry getting torn down, and as it is removed by RCU, it still remains visible on some lists - and to d_compare. If the filesystem just did a name comparison, we wouldn't care. And we could just fix procfs to know about negative dentries too. But rather than have the low-level filesystems know about internal VFS details, just move the check for a unhashed dentry up a bit, so that we will only call d_compare on dentries that are still active. The actual oops this caused didn't look like a NULL pointer dereference because procfs did a 'container_of(inode, struct proc_inode, vfs_inode)' to get at its internal proc_inode information from the inode pointer, and accessed a field below the inode. So the oops would look something like BUG: unable to handle kernel paging request at fffffffffffffff0 IP: [<ffffffff802bc6c6>] proc_sys_compare+0x36/0x50 and was seen on both x86-64 (Alexey Dobriyan and Hugh Dickins) and ppc64 (Hugh Dickins). Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-29 14:42:57 +00:00
if (d_unhashed(dentry))
goto next;
if (!d_same_name(dentry, parent, name))
goto next;
dentry->d_lockref.count++;
Fix NULL pointer dereference in proc_sys_compare The VFS interface for the 'd_compare()' is a bit special (read: 'odd'), because it really just essentially replaces a memcmp(). The filesystem is supposed to just compare the two names with whatever case-independent or other function. And when I say 'is supposed to', I obviously mean that 'procfs does odd things, and actually looks at the dentry that we don't even pass down, rather than just the name'. Which results in problems, because we actually call d_compare before we have even verified that the dentry is still hashed at all. And that causes a problm since the inode that procfs looks at may have been free'd and the d_inode pointer is NULL. procfs just assumes that all dentries are positive, since procfs itself never generates a negative one. But memory pressure will still result in the dentry getting torn down, and as it is removed by RCU, it still remains visible on some lists - and to d_compare. If the filesystem just did a name comparison, we wouldn't care. And we could just fix procfs to know about negative dentries too. But rather than have the low-level filesystems know about internal VFS details, just move the check for a unhashed dentry up a bit, so that we will only call d_compare on dentries that are still active. The actual oops this caused didn't look like a NULL pointer dereference because procfs did a 'container_of(inode, struct proc_inode, vfs_inode)' to get at its internal proc_inode information from the inode pointer, and accessed a field below the inode. So the oops would look something like BUG: unable to handle kernel paging request at fffffffffffffff0 IP: [<ffffffff802bc6c6>] proc_sys_compare+0x36/0x50 and was seen on both x86-64 (Alexey Dobriyan and Hugh Dickins) and ppc64 (Hugh Dickins). Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-29 14:42:57 +00:00
found = dentry;
spin_unlock(&dentry->d_lock);
break;
next:
spin_unlock(&dentry->d_lock);
}
rcu_read_unlock();
return found;
}
/**
* d_hash_and_lookup - hash the qstr then search for a dentry
* @dir: Directory to search in
* @name: qstr of name we wish to find
*
* On lookup failure NULL is returned; on bad name - ERR_PTR(-error)
*/
struct dentry *d_hash_and_lookup(struct dentry *dir, struct qstr *name)
{
/*
* Check for a fs-specific hash function. Note that we must
* calculate the standard hash first, as the d_op->d_hash()
* routine may choose to leave the hash value unchanged.
*/
name->hash = full_name_hash(dir, name->name, name->len);
if (dir->d_flags & DCACHE_OP_HASH) {
int err = dir->d_op->d_hash(dir, name);
if (unlikely(err < 0))
return ERR_PTR(err);
}
return d_lookup(dir, name);
}
EXPORT_SYMBOL(d_hash_and_lookup);
/*
* When a file is deleted, we have two options:
* - turn this dentry into a negative dentry
* - unhash this dentry and free it.
*
* Usually, we want to just turn this into
* a negative dentry, but if anybody else is
* currently using the dentry or the inode
* we can't do that and we fall back on removing
* it from the hash queues and waiting for
* it to be deleted later when it has no users
*/
/**
* d_delete - delete a dentry
* @dentry: The dentry to delete
*
* Turn the dentry into a negative dentry if possible, otherwise
* remove it from the hash queues so it can be deleted later
*/
void d_delete(struct dentry * dentry)
{
struct inode *inode = dentry->d_inode;
spin_lock(&inode->i_lock);
spin_lock(&dentry->d_lock);
/*
* Are we the only user?
*/
if (dentry->d_lockref.count == 1) {
dentry->d_flags &= ~DCACHE_CANT_MOUNT;
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
dentry_unlink_inode(dentry);
} else {
__d_drop(dentry);
spin_unlock(&dentry->d_lock);
spin_unlock(&inode->i_lock);
}
}
EXPORT_SYMBOL(d_delete);
static void __d_rehash(struct dentry *entry)
{
struct hlist_bl_head *b = d_hash(entry->d_name.hash);
hlist_bl_lock(b);
hlist_bl_add_head_rcu(&entry->d_hash, b);
hlist_bl_unlock(b);
}
/**
* d_rehash - add an entry back to the hash
* @entry: dentry to add to the hash
*
* Adds a dentry to the hash according to its name.
*/
void d_rehash(struct dentry * entry)
{
spin_lock(&entry->d_lock);
__d_rehash(entry);
spin_unlock(&entry->d_lock);
}
EXPORT_SYMBOL(d_rehash);
parallel lookups machinery, part 2 We'll need to verify that there's neither a hashed nor in-lookup dentry with desired parent/name before adding to in-lookup set. One possible solution would be to hold the parent's ->d_lock through both checks, but while the in-lookup set is relatively small at any time, dcache is not. And holding the parent's ->d_lock through something like __d_lookup_rcu() would suck too badly. So we leave the parent's ->d_lock alone, which means that we watch out for the following scenario: * we verify that there's no hashed match * existing in-lookup match gets hashed by another process * we verify that there's no in-lookup matches and decide that everything's fine. Solution: per-directory kinda-sorta seqlock, bumped around the times we hash something that used to be in-lookup or move (and hash) something in place of in-lookup. Then the above would turn into * read the counter * do dcache lookup * if no matches found, check for in-lookup matches * if there had been none of those either, check if the counter has changed; repeat if it has. The "kinda-sorta" part is due to the fact that we don't have much spare space in inode. There is a spare word (shared with i_bdev/i_cdev/i_pipe), so the counter part is not a problem, but spinlock is a different story. We could use the parent's ->d_lock, and it would be less painful in terms of contention, for __d_add() it would be rather inconvenient to grab; we could do that (using lock_parent()), but... Fortunately, we can get serialization on the counter itself, and it might be a good idea in general; we can use cmpxchg() in a loop to get from even to odd and smp_store_release() from odd to even. This commit adds the counter and updating logics; the readers will be added in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 04:58:55 +00:00
static inline unsigned start_dir_add(struct inode *dir)
{
for (;;) {
unsigned n = dir->i_dir_seq;
if (!(n & 1) && cmpxchg(&dir->i_dir_seq, n, n + 1) == n)
return n;
cpu_relax();
}
}
static inline void end_dir_add(struct inode *dir, unsigned n)
{
smp_store_release(&dir->i_dir_seq, n + 2);
}
static void d_wait_lookup(struct dentry *dentry)
{
if (d_in_lookup(dentry)) {
DECLARE_WAITQUEUE(wait, current);
add_wait_queue(dentry->d_wait, &wait);
do {
set_current_state(TASK_UNINTERRUPTIBLE);
spin_unlock(&dentry->d_lock);
schedule();
spin_lock(&dentry->d_lock);
} while (d_in_lookup(dentry));
}
}
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
struct dentry *d_alloc_parallel(struct dentry *parent,
const struct qstr *name,
wait_queue_head_t *wq)
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
{
unsigned int hash = name->hash;
struct hlist_bl_head *b = in_lookup_hash(parent, hash);
struct hlist_bl_node *node;
struct dentry *new = d_alloc(parent, name);
struct dentry *dentry;
unsigned seq, r_seq, d_seq;
if (unlikely(!new))
return ERR_PTR(-ENOMEM);
retry:
rcu_read_lock();
2018-02-19 14:55:54 +00:00
seq = smp_load_acquire(&parent->d_inode->i_dir_seq);
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
r_seq = read_seqbegin(&rename_lock);
dentry = __d_lookup_rcu(parent, name, &d_seq);
if (unlikely(dentry)) {
if (!lockref_get_not_dead(&dentry->d_lockref)) {
rcu_read_unlock();
goto retry;
}
if (read_seqcount_retry(&dentry->d_seq, d_seq)) {
rcu_read_unlock();
dput(dentry);
goto retry;
}
rcu_read_unlock();
dput(new);
return dentry;
}
if (unlikely(read_seqretry(&rename_lock, r_seq))) {
rcu_read_unlock();
goto retry;
}
2018-02-19 14:55:54 +00:00
if (unlikely(seq & 1)) {
rcu_read_unlock();
goto retry;
}
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
hlist_bl_lock(b);
if (unlikely(READ_ONCE(parent->d_inode->i_dir_seq) != seq)) {
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
hlist_bl_unlock(b);
rcu_read_unlock();
goto retry;
}
/*
* No changes for the parent since the beginning of d_lookup().
* Since all removals from the chain happen with hlist_bl_lock(),
* any potential in-lookup matches are going to stay here until
* we unlock the chain. All fields are stable in everything
* we encounter.
*/
hlist_bl_for_each_entry(dentry, node, b, d_u.d_in_lookup_hash) {
if (dentry->d_name.hash != hash)
continue;
if (dentry->d_parent != parent)
continue;
if (!d_same_name(dentry, parent, name))
continue;
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
hlist_bl_unlock(b);
/* now we can try to grab a reference */
if (!lockref_get_not_dead(&dentry->d_lockref)) {
rcu_read_unlock();
goto retry;
}
rcu_read_unlock();
/*
* somebody is likely to be still doing lookup for it;
* wait for them to finish
*/
spin_lock(&dentry->d_lock);
d_wait_lookup(dentry);
/*
* it's not in-lookup anymore; in principle we should repeat
* everything from dcache lookup, but it's likely to be what
* d_lookup() would've found anyway. If it is, just return it;
* otherwise we really have to repeat the whole thing.
*/
if (unlikely(dentry->d_name.hash != hash))
goto mismatch;
if (unlikely(dentry->d_parent != parent))
goto mismatch;
if (unlikely(d_unhashed(dentry)))
goto mismatch;
if (unlikely(!d_same_name(dentry, parent, name)))
goto mismatch;
/* OK, it *is* a hashed match; return it */
spin_unlock(&dentry->d_lock);
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
dput(new);
return dentry;
}
rcu_read_unlock();
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
/* we can't take ->d_lock here; it's OK, though. */
new->d_flags |= DCACHE_PAR_LOOKUP;
new->d_wait = wq;
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
hlist_bl_add_head_rcu(&new->d_u.d_in_lookup_hash, b);
hlist_bl_unlock(b);
return new;
mismatch:
spin_unlock(&dentry->d_lock);
dput(dentry);
goto retry;
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
}
EXPORT_SYMBOL(d_alloc_parallel);
beginning of transition to parallel lookups - marking in-lookup dentries marked as such when (would be) parallel lookup is about to pass them to actual ->lookup(); unmarked when * __d_add() is about to make it hashed, positive or not. * __d_move() (from d_splice_alias(), directly or via __d_unalias()) puts a preexisting dentry in its place * in caller of ->lookup() if it has escaped all of the above. Bug (WARN_ON, actually) if it reaches the final dput() or d_instantiate() while still marked such. As the result, we are guaranteed that for as long as the flag is set, dentry will * remain negative unhashed with positive refcount * never have its ->d_alias looked at * never have its ->d_lru looked at * never have its ->d_parent and ->d_name changed Right now we have at most one such for any given parent directory. With parallel lookups that restriction will weaken to * only exist when parent is locked shared * at most one with given (parent,name) pair (comparison of names is according to ->d_compare()) * only exist when there's no hashed dentry with the same (parent,name) Transition will take the next several commits; unfortunately, we'll only be able to switch to rwsem at the end of this series. The reason for not making it a single patch is to simplify review. New primitives: d_in_lookup() (a predicate checking if dentry is in the in-lookup state) and d_lookup_done() (tells the system that we are done with lookup and if it's still marked as in-lookup, it should cease to be such). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-14 23:52:13 +00:00
void __d_lookup_done(struct dentry *dentry)
{
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
struct hlist_bl_head *b = in_lookup_hash(dentry->d_parent,
dentry->d_name.hash);
hlist_bl_lock(b);
beginning of transition to parallel lookups - marking in-lookup dentries marked as such when (would be) parallel lookup is about to pass them to actual ->lookup(); unmarked when * __d_add() is about to make it hashed, positive or not. * __d_move() (from d_splice_alias(), directly or via __d_unalias()) puts a preexisting dentry in its place * in caller of ->lookup() if it has escaped all of the above. Bug (WARN_ON, actually) if it reaches the final dput() or d_instantiate() while still marked such. As the result, we are guaranteed that for as long as the flag is set, dentry will * remain negative unhashed with positive refcount * never have its ->d_alias looked at * never have its ->d_lru looked at * never have its ->d_parent and ->d_name changed Right now we have at most one such for any given parent directory. With parallel lookups that restriction will weaken to * only exist when parent is locked shared * at most one with given (parent,name) pair (comparison of names is according to ->d_compare()) * only exist when there's no hashed dentry with the same (parent,name) Transition will take the next several commits; unfortunately, we'll only be able to switch to rwsem at the end of this series. The reason for not making it a single patch is to simplify review. New primitives: d_in_lookup() (a predicate checking if dentry is in the in-lookup state) and d_lookup_done() (tells the system that we are done with lookup and if it's still marked as in-lookup, it should cease to be such). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-14 23:52:13 +00:00
dentry->d_flags &= ~DCACHE_PAR_LOOKUP;
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
__hlist_bl_del(&dentry->d_u.d_in_lookup_hash);
wake_up_all(dentry->d_wait);
dentry->d_wait = NULL;
parallel lookups machinery, part 3 We will need to be able to check if there is an in-lookup dentry with matching parent/name. Right now it's impossible, but as soon as start locking directories shared such beasts will appear. Add a secondary hash for locating those. Hash chains go through the same space where d_alias will be once it's not in-lookup anymore. Search is done under the same bitlock we use for modifications - with the primary hash we can rely on d_rehash() into the wrong chain being the worst that could happen, but here the pointers are buggered once it's removed from the chain. On the other hand, the chains are not going to be long and normally we'll end up adding to the chain anyway. That allows us to avoid bothering with ->d_lock when doing the comparisons - everything is stable until removed from chain. New helper: d_alloc_parallel(). Right now it allocates, verifies that no hashed and in-lookup matches exist and adds to in-lookup hash. Returns ERR_PTR() for error, hashed match (in the unlikely case it's been found) or new dentry. In-lookup matches trigger BUG() for now; that will change in the next commit when we introduce waiting for ongoing lookup to finish. Note that in-lookup matches won't be possible until we actually go for shared locking. lookup_slow() switched to use of d_alloc_parallel(). Again, these commits are separated only for making it easier to review. All this machinery will start doing something useful only when we go for shared locking; it's just that the combination is too large for my taste. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 06:42:04 +00:00
hlist_bl_unlock(b);
INIT_HLIST_NODE(&dentry->d_u.d_alias);
INIT_LIST_HEAD(&dentry->d_lru);
beginning of transition to parallel lookups - marking in-lookup dentries marked as such when (would be) parallel lookup is about to pass them to actual ->lookup(); unmarked when * __d_add() is about to make it hashed, positive or not. * __d_move() (from d_splice_alias(), directly or via __d_unalias()) puts a preexisting dentry in its place * in caller of ->lookup() if it has escaped all of the above. Bug (WARN_ON, actually) if it reaches the final dput() or d_instantiate() while still marked such. As the result, we are guaranteed that for as long as the flag is set, dentry will * remain negative unhashed with positive refcount * never have its ->d_alias looked at * never have its ->d_lru looked at * never have its ->d_parent and ->d_name changed Right now we have at most one such for any given parent directory. With parallel lookups that restriction will weaken to * only exist when parent is locked shared * at most one with given (parent,name) pair (comparison of names is according to ->d_compare()) * only exist when there's no hashed dentry with the same (parent,name) Transition will take the next several commits; unfortunately, we'll only be able to switch to rwsem at the end of this series. The reason for not making it a single patch is to simplify review. New primitives: d_in_lookup() (a predicate checking if dentry is in the in-lookup state) and d_lookup_done() (tells the system that we are done with lookup and if it's still marked as in-lookup, it should cease to be such). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-14 23:52:13 +00:00
}
EXPORT_SYMBOL(__d_lookup_done);
/* inode->i_lock held if inode is non-NULL */
static inline void __d_add(struct dentry *dentry, struct inode *inode)
{
parallel lookups machinery, part 2 We'll need to verify that there's neither a hashed nor in-lookup dentry with desired parent/name before adding to in-lookup set. One possible solution would be to hold the parent's ->d_lock through both checks, but while the in-lookup set is relatively small at any time, dcache is not. And holding the parent's ->d_lock through something like __d_lookup_rcu() would suck too badly. So we leave the parent's ->d_lock alone, which means that we watch out for the following scenario: * we verify that there's no hashed match * existing in-lookup match gets hashed by another process * we verify that there's no in-lookup matches and decide that everything's fine. Solution: per-directory kinda-sorta seqlock, bumped around the times we hash something that used to be in-lookup or move (and hash) something in place of in-lookup. Then the above would turn into * read the counter * do dcache lookup * if no matches found, check for in-lookup matches * if there had been none of those either, check if the counter has changed; repeat if it has. The "kinda-sorta" part is due to the fact that we don't have much spare space in inode. There is a spare word (shared with i_bdev/i_cdev/i_pipe), so the counter part is not a problem, but spinlock is a different story. We could use the parent's ->d_lock, and it would be less painful in terms of contention, for __d_add() it would be rather inconvenient to grab; we could do that (using lock_parent()), but... Fortunately, we can get serialization on the counter itself, and it might be a good idea in general; we can use cmpxchg() in a loop to get from even to odd and smp_store_release() from odd to even. This commit adds the counter and updating logics; the readers will be added in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 04:58:55 +00:00
struct inode *dir = NULL;
unsigned n;
spin_lock(&dentry->d_lock);
parallel lookups machinery, part 2 We'll need to verify that there's neither a hashed nor in-lookup dentry with desired parent/name before adding to in-lookup set. One possible solution would be to hold the parent's ->d_lock through both checks, but while the in-lookup set is relatively small at any time, dcache is not. And holding the parent's ->d_lock through something like __d_lookup_rcu() would suck too badly. So we leave the parent's ->d_lock alone, which means that we watch out for the following scenario: * we verify that there's no hashed match * existing in-lookup match gets hashed by another process * we verify that there's no in-lookup matches and decide that everything's fine. Solution: per-directory kinda-sorta seqlock, bumped around the times we hash something that used to be in-lookup or move (and hash) something in place of in-lookup. Then the above would turn into * read the counter * do dcache lookup * if no matches found, check for in-lookup matches * if there had been none of those either, check if the counter has changed; repeat if it has. The "kinda-sorta" part is due to the fact that we don't have much spare space in inode. There is a spare word (shared with i_bdev/i_cdev/i_pipe), so the counter part is not a problem, but spinlock is a different story. We could use the parent's ->d_lock, and it would be less painful in terms of contention, for __d_add() it would be rather inconvenient to grab; we could do that (using lock_parent()), but... Fortunately, we can get serialization on the counter itself, and it might be a good idea in general; we can use cmpxchg() in a loop to get from even to odd and smp_store_release() from odd to even. This commit adds the counter and updating logics; the readers will be added in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 04:58:55 +00:00
if (unlikely(d_in_lookup(dentry))) {
dir = dentry->d_parent->d_inode;
n = start_dir_add(dir);
beginning of transition to parallel lookups - marking in-lookup dentries marked as such when (would be) parallel lookup is about to pass them to actual ->lookup(); unmarked when * __d_add() is about to make it hashed, positive or not. * __d_move() (from d_splice_alias(), directly or via __d_unalias()) puts a preexisting dentry in its place * in caller of ->lookup() if it has escaped all of the above. Bug (WARN_ON, actually) if it reaches the final dput() or d_instantiate() while still marked such. As the result, we are guaranteed that for as long as the flag is set, dentry will * remain negative unhashed with positive refcount * never have its ->d_alias looked at * never have its ->d_lru looked at * never have its ->d_parent and ->d_name changed Right now we have at most one such for any given parent directory. With parallel lookups that restriction will weaken to * only exist when parent is locked shared * at most one with given (parent,name) pair (comparison of names is according to ->d_compare()) * only exist when there's no hashed dentry with the same (parent,name) Transition will take the next several commits; unfortunately, we'll only be able to switch to rwsem at the end of this series. The reason for not making it a single patch is to simplify review. New primitives: d_in_lookup() (a predicate checking if dentry is in the in-lookup state) and d_lookup_done() (tells the system that we are done with lookup and if it's still marked as in-lookup, it should cease to be such). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-14 23:52:13 +00:00
__d_lookup_done(dentry);
parallel lookups machinery, part 2 We'll need to verify that there's neither a hashed nor in-lookup dentry with desired parent/name before adding to in-lookup set. One possible solution would be to hold the parent's ->d_lock through both checks, but while the in-lookup set is relatively small at any time, dcache is not. And holding the parent's ->d_lock through something like __d_lookup_rcu() would suck too badly. So we leave the parent's ->d_lock alone, which means that we watch out for the following scenario: * we verify that there's no hashed match * existing in-lookup match gets hashed by another process * we verify that there's no in-lookup matches and decide that everything's fine. Solution: per-directory kinda-sorta seqlock, bumped around the times we hash something that used to be in-lookup or move (and hash) something in place of in-lookup. Then the above would turn into * read the counter * do dcache lookup * if no matches found, check for in-lookup matches * if there had been none of those either, check if the counter has changed; repeat if it has. The "kinda-sorta" part is due to the fact that we don't have much spare space in inode. There is a spare word (shared with i_bdev/i_cdev/i_pipe), so the counter part is not a problem, but spinlock is a different story. We could use the parent's ->d_lock, and it would be less painful in terms of contention, for __d_add() it would be rather inconvenient to grab; we could do that (using lock_parent()), but... Fortunately, we can get serialization on the counter itself, and it might be a good idea in general; we can use cmpxchg() in a loop to get from even to odd and smp_store_release() from odd to even. This commit adds the counter and updating logics; the readers will be added in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 04:58:55 +00:00
}
if (inode) {
unsigned add_flags = d_flags_for_inode(inode);
hlist_add_head(&dentry->d_u.d_alias, &inode->i_dentry);
raw_write_seqcount_begin(&dentry->d_seq);
__d_set_inode_and_type(dentry, inode, add_flags);
raw_write_seqcount_end(&dentry->d_seq);
fsnotify_update_flags(dentry);
}
__d_rehash(dentry);
parallel lookups machinery, part 2 We'll need to verify that there's neither a hashed nor in-lookup dentry with desired parent/name before adding to in-lookup set. One possible solution would be to hold the parent's ->d_lock through both checks, but while the in-lookup set is relatively small at any time, dcache is not. And holding the parent's ->d_lock through something like __d_lookup_rcu() would suck too badly. So we leave the parent's ->d_lock alone, which means that we watch out for the following scenario: * we verify that there's no hashed match * existing in-lookup match gets hashed by another process * we verify that there's no in-lookup matches and decide that everything's fine. Solution: per-directory kinda-sorta seqlock, bumped around the times we hash something that used to be in-lookup or move (and hash) something in place of in-lookup. Then the above would turn into * read the counter * do dcache lookup * if no matches found, check for in-lookup matches * if there had been none of those either, check if the counter has changed; repeat if it has. The "kinda-sorta" part is due to the fact that we don't have much spare space in inode. There is a spare word (shared with i_bdev/i_cdev/i_pipe), so the counter part is not a problem, but spinlock is a different story. We could use the parent's ->d_lock, and it would be less painful in terms of contention, for __d_add() it would be rather inconvenient to grab; we could do that (using lock_parent()), but... Fortunately, we can get serialization on the counter itself, and it might be a good idea in general; we can use cmpxchg() in a loop to get from even to odd and smp_store_release() from odd to even. This commit adds the counter and updating logics; the readers will be added in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 04:58:55 +00:00
if (dir)
end_dir_add(dir, n);
spin_unlock(&dentry->d_lock);
if (inode)
spin_unlock(&inode->i_lock);
}
/**
* d_add - add dentry to hash queues
* @entry: dentry to add
* @inode: The inode to attach to this dentry
*
* This adds the entry to the hash queues and initializes @inode.
* The entry was actually filled in earlier during d_alloc().
*/
void d_add(struct dentry *entry, struct inode *inode)
{
if (inode) {
security_d_instantiate(entry, inode);
spin_lock(&inode->i_lock);
}
__d_add(entry, inode);
}
EXPORT_SYMBOL(d_add);
/**
* d_exact_alias - find and hash an exact unhashed alias
* @entry: dentry to add
* @inode: The inode to go with this dentry
*
* If an unhashed dentry with the same name/parent and desired
* inode already exists, hash and return it. Otherwise, return
* NULL.
*
* Parent directory should be locked.
*/
struct dentry *d_exact_alias(struct dentry *entry, struct inode *inode)
{
struct dentry *alias;
unsigned int hash = entry->d_name.hash;
spin_lock(&inode->i_lock);
hlist_for_each_entry(alias, &inode->i_dentry, d_u.d_alias) {
/*
* Don't need alias->d_lock here, because aliases with
* d_parent == entry->d_parent are not subject to name or
* parent changes, because the parent inode i_mutex is held.
*/
if (alias->d_name.hash != hash)
continue;
if (alias->d_parent != entry->d_parent)
continue;
if (!d_same_name(alias, entry->d_parent, &entry->d_name))
continue;
spin_lock(&alias->d_lock);
if (!d_unhashed(alias)) {
spin_unlock(&alias->d_lock);
alias = NULL;
} else {
__dget_dlock(alias);
__d_rehash(alias);
spin_unlock(&alias->d_lock);
}
spin_unlock(&inode->i_lock);
return alias;
}
spin_unlock(&inode->i_lock);
return NULL;
}
EXPORT_SYMBOL(d_exact_alias);
Allow sharing external names after __d_move() * external dentry names get a small structure prepended to them (struct external_name). * it contains an atomic refcount, matching the number of struct dentry instances that have ->d_name.name pointing to that external name. The first thing free_dentry() does is decrementing refcount of external name, so the instances that are between the call of free_dentry() and RCU-delayed actual freeing do not contribute. * __d_move(x, y, false) makes the name of x equal to the name of y, external or not. If y has an external name, extra reference is grabbed and put into x->d_name.name. If x used to have an external name, the reference to the old name is dropped and, should it reach zero, freeing is scheduled via kfree_rcu(). * free_dentry() in dentry with external name decrements the refcount of that name and, should it reach zero, does RCU-delayed call that will free both the dentry and external name. Otherwise it does what it used to do, except that __d_free() doesn't even look at ->d_name.name; it simply frees the dentry. All non-RCU accesses to dentry external name are safe wrt freeing since they all should happen before free_dentry() is called. RCU accesses might run into a dentry seen by free_dentry() or into an old name that got already dropped by __d_move(); however, in both cases dentry must have been alive and refer to that name at some point after we'd done rcu_read_lock(), which means that any freeing must be still pending. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-29 18:54:27 +00:00
static void swap_names(struct dentry *dentry, struct dentry *target)
{
Allow sharing external names after __d_move() * external dentry names get a small structure prepended to them (struct external_name). * it contains an atomic refcount, matching the number of struct dentry instances that have ->d_name.name pointing to that external name. The first thing free_dentry() does is decrementing refcount of external name, so the instances that are between the call of free_dentry() and RCU-delayed actual freeing do not contribute. * __d_move(x, y, false) makes the name of x equal to the name of y, external or not. If y has an external name, extra reference is grabbed and put into x->d_name.name. If x used to have an external name, the reference to the old name is dropped and, should it reach zero, freeing is scheduled via kfree_rcu(). * free_dentry() in dentry with external name decrements the refcount of that name and, should it reach zero, does RCU-delayed call that will free both the dentry and external name. Otherwise it does what it used to do, except that __d_free() doesn't even look at ->d_name.name; it simply frees the dentry. All non-RCU accesses to dentry external name are safe wrt freeing since they all should happen before free_dentry() is called. RCU accesses might run into a dentry seen by free_dentry() or into an old name that got already dropped by __d_move(); however, in both cases dentry must have been alive and refer to that name at some point after we'd done rcu_read_lock(), which means that any freeing must be still pending. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-29 18:54:27 +00:00
if (unlikely(dname_external(target))) {
if (unlikely(dname_external(dentry))) {
/*
* Both external: swap the pointers
*/
swap(target->d_name.name, dentry->d_name.name);
} else {
/*
* dentry:internal, target:external. Steal target's
* storage and make target internal.
*/
memcpy(target->d_iname, dentry->d_name.name,
dentry->d_name.len + 1);
dentry->d_name.name = target->d_name.name;
target->d_name.name = target->d_iname;
}
} else {
Allow sharing external names after __d_move() * external dentry names get a small structure prepended to them (struct external_name). * it contains an atomic refcount, matching the number of struct dentry instances that have ->d_name.name pointing to that external name. The first thing free_dentry() does is decrementing refcount of external name, so the instances that are between the call of free_dentry() and RCU-delayed actual freeing do not contribute. * __d_move(x, y, false) makes the name of x equal to the name of y, external or not. If y has an external name, extra reference is grabbed and put into x->d_name.name. If x used to have an external name, the reference to the old name is dropped and, should it reach zero, freeing is scheduled via kfree_rcu(). * free_dentry() in dentry with external name decrements the refcount of that name and, should it reach zero, does RCU-delayed call that will free both the dentry and external name. Otherwise it does what it used to do, except that __d_free() doesn't even look at ->d_name.name; it simply frees the dentry. All non-RCU accesses to dentry external name are safe wrt freeing since they all should happen before free_dentry() is called. RCU accesses might run into a dentry seen by free_dentry() or into an old name that got already dropped by __d_move(); however, in both cases dentry must have been alive and refer to that name at some point after we'd done rcu_read_lock(), which means that any freeing must be still pending. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-29 18:54:27 +00:00
if (unlikely(dname_external(dentry))) {
/*
* dentry:external, target:internal. Give dentry's
* storage to target and make dentry internal
*/
memcpy(dentry->d_iname, target->d_name.name,
target->d_name.len + 1);
target->d_name.name = dentry->d_name.name;
dentry->d_name.name = dentry->d_iname;
} else {
/*
* Both are internal.
*/
unsigned int i;
BUILD_BUG_ON(!IS_ALIGNED(DNAME_INLINE_LEN, sizeof(long)));
for (i = 0; i < DNAME_INLINE_LEN / sizeof(long); i++) {
swap(((long *) &dentry->d_iname)[i],
((long *) &target->d_iname)[i]);
}
}
}
swap(dentry->d_name.hash_len, target->d_name.hash_len);
}
Allow sharing external names after __d_move() * external dentry names get a small structure prepended to them (struct external_name). * it contains an atomic refcount, matching the number of struct dentry instances that have ->d_name.name pointing to that external name. The first thing free_dentry() does is decrementing refcount of external name, so the instances that are between the call of free_dentry() and RCU-delayed actual freeing do not contribute. * __d_move(x, y, false) makes the name of x equal to the name of y, external or not. If y has an external name, extra reference is grabbed and put into x->d_name.name. If x used to have an external name, the reference to the old name is dropped and, should it reach zero, freeing is scheduled via kfree_rcu(). * free_dentry() in dentry with external name decrements the refcount of that name and, should it reach zero, does RCU-delayed call that will free both the dentry and external name. Otherwise it does what it used to do, except that __d_free() doesn't even look at ->d_name.name; it simply frees the dentry. All non-RCU accesses to dentry external name are safe wrt freeing since they all should happen before free_dentry() is called. RCU accesses might run into a dentry seen by free_dentry() or into an old name that got already dropped by __d_move(); however, in both cases dentry must have been alive and refer to that name at some point after we'd done rcu_read_lock(), which means that any freeing must be still pending. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-29 18:54:27 +00:00
static void copy_name(struct dentry *dentry, struct dentry *target)
{
struct external_name *old_name = NULL;
if (unlikely(dname_external(dentry)))
old_name = external_name(dentry);
if (unlikely(dname_external(target))) {
atomic_inc(&external_name(target)->u.count);
dentry->d_name = target->d_name;
} else {
memcpy(dentry->d_iname, target->d_name.name,
target->d_name.len + 1);
dentry->d_name.name = dentry->d_iname;
dentry->d_name.hash_len = target->d_name.hash_len;
}
if (old_name && likely(atomic_dec_and_test(&old_name->u.count)))
kfree_rcu(old_name, u.head);
Allow sharing external names after __d_move() * external dentry names get a small structure prepended to them (struct external_name). * it contains an atomic refcount, matching the number of struct dentry instances that have ->d_name.name pointing to that external name. The first thing free_dentry() does is decrementing refcount of external name, so the instances that are between the call of free_dentry() and RCU-delayed actual freeing do not contribute. * __d_move(x, y, false) makes the name of x equal to the name of y, external or not. If y has an external name, extra reference is grabbed and put into x->d_name.name. If x used to have an external name, the reference to the old name is dropped and, should it reach zero, freeing is scheduled via kfree_rcu(). * free_dentry() in dentry with external name decrements the refcount of that name and, should it reach zero, does RCU-delayed call that will free both the dentry and external name. Otherwise it does what it used to do, except that __d_free() doesn't even look at ->d_name.name; it simply frees the dentry. All non-RCU accesses to dentry external name are safe wrt freeing since they all should happen before free_dentry() is called. RCU accesses might run into a dentry seen by free_dentry() or into an old name that got already dropped by __d_move(); however, in both cases dentry must have been alive and refer to that name at some point after we'd done rcu_read_lock(), which means that any freeing must be still pending. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-29 18:54:27 +00:00
}
/*
* __d_move - move a dentry
* @dentry: entry to move
* @target: new dentry
* @exchange: exchange the two dentries
*
* Update the dcache to reflect the move of a file name. Negative
* dcache entries should not be moved in this way. Caller must hold
* rename_lock, the i_mutex of the source and target directories,
* and the sb->s_vfs_rename_mutex if they differ. See lock_rename().
*/
static void __d_move(struct dentry *dentry, struct dentry *target,
bool exchange)
{
struct dentry *old_parent, *p;
parallel lookups machinery, part 2 We'll need to verify that there's neither a hashed nor in-lookup dentry with desired parent/name before adding to in-lookup set. One possible solution would be to hold the parent's ->d_lock through both checks, but while the in-lookup set is relatively small at any time, dcache is not. And holding the parent's ->d_lock through something like __d_lookup_rcu() would suck too badly. So we leave the parent's ->d_lock alone, which means that we watch out for the following scenario: * we verify that there's no hashed match * existing in-lookup match gets hashed by another process * we verify that there's no in-lookup matches and decide that everything's fine. Solution: per-directory kinda-sorta seqlock, bumped around the times we hash something that used to be in-lookup or move (and hash) something in place of in-lookup. Then the above would turn into * read the counter * do dcache lookup * if no matches found, check for in-lookup matches * if there had been none of those either, check if the counter has changed; repeat if it has. The "kinda-sorta" part is due to the fact that we don't have much spare space in inode. There is a spare word (shared with i_bdev/i_cdev/i_pipe), so the counter part is not a problem, but spinlock is a different story. We could use the parent's ->d_lock, and it would be less painful in terms of contention, for __d_add() it would be rather inconvenient to grab; we could do that (using lock_parent()), but... Fortunately, we can get serialization on the counter itself, and it might be a good idea in general; we can use cmpxchg() in a loop to get from even to odd and smp_store_release() from odd to even. This commit adds the counter and updating logics; the readers will be added in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 04:58:55 +00:00
struct inode *dir = NULL;
unsigned n;
WARN_ON(!dentry->d_inode);
if (WARN_ON(dentry == target))
return;
BUG_ON(d_ancestor(target, dentry));
old_parent = dentry->d_parent;
p = d_ancestor(old_parent, target);
if (IS_ROOT(dentry)) {
BUG_ON(p);
spin_lock(&target->d_parent->d_lock);
} else if (!p) {
/* target is not a descendent of dentry->d_parent */
spin_lock(&target->d_parent->d_lock);
spin_lock_nested(&old_parent->d_lock, DENTRY_D_LOCK_NESTED);
} else {
BUG_ON(p == dentry);
spin_lock(&old_parent->d_lock);
if (p != target)
spin_lock_nested(&target->d_parent->d_lock,
DENTRY_D_LOCK_NESTED);
}
spin_lock_nested(&dentry->d_lock, 2);
spin_lock_nested(&target->d_lock, 3);
parallel lookups machinery, part 2 We'll need to verify that there's neither a hashed nor in-lookup dentry with desired parent/name before adding to in-lookup set. One possible solution would be to hold the parent's ->d_lock through both checks, but while the in-lookup set is relatively small at any time, dcache is not. And holding the parent's ->d_lock through something like __d_lookup_rcu() would suck too badly. So we leave the parent's ->d_lock alone, which means that we watch out for the following scenario: * we verify that there's no hashed match * existing in-lookup match gets hashed by another process * we verify that there's no in-lookup matches and decide that everything's fine. Solution: per-directory kinda-sorta seqlock, bumped around the times we hash something that used to be in-lookup or move (and hash) something in place of in-lookup. Then the above would turn into * read the counter * do dcache lookup * if no matches found, check for in-lookup matches * if there had been none of those either, check if the counter has changed; repeat if it has. The "kinda-sorta" part is due to the fact that we don't have much spare space in inode. There is a spare word (shared with i_bdev/i_cdev/i_pipe), so the counter part is not a problem, but spinlock is a different story. We could use the parent's ->d_lock, and it would be less painful in terms of contention, for __d_add() it would be rather inconvenient to grab; we could do that (using lock_parent()), but... Fortunately, we can get serialization on the counter itself, and it might be a good idea in general; we can use cmpxchg() in a loop to get from even to odd and smp_store_release() from odd to even. This commit adds the counter and updating logics; the readers will be added in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 04:58:55 +00:00
if (unlikely(d_in_lookup(target))) {
dir = target->d_parent->d_inode;
n = start_dir_add(dir);
beginning of transition to parallel lookups - marking in-lookup dentries marked as such when (would be) parallel lookup is about to pass them to actual ->lookup(); unmarked when * __d_add() is about to make it hashed, positive or not. * __d_move() (from d_splice_alias(), directly or via __d_unalias()) puts a preexisting dentry in its place * in caller of ->lookup() if it has escaped all of the above. Bug (WARN_ON, actually) if it reaches the final dput() or d_instantiate() while still marked such. As the result, we are guaranteed that for as long as the flag is set, dentry will * remain negative unhashed with positive refcount * never have its ->d_alias looked at * never have its ->d_lru looked at * never have its ->d_parent and ->d_name changed Right now we have at most one such for any given parent directory. With parallel lookups that restriction will weaken to * only exist when parent is locked shared * at most one with given (parent,name) pair (comparison of names is according to ->d_compare()) * only exist when there's no hashed dentry with the same (parent,name) Transition will take the next several commits; unfortunately, we'll only be able to switch to rwsem at the end of this series. The reason for not making it a single patch is to simplify review. New primitives: d_in_lookup() (a predicate checking if dentry is in the in-lookup state) and d_lookup_done() (tells the system that we are done with lookup and if it's still marked as in-lookup, it should cease to be such). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-14 23:52:13 +00:00
__d_lookup_done(target);
parallel lookups machinery, part 2 We'll need to verify that there's neither a hashed nor in-lookup dentry with desired parent/name before adding to in-lookup set. One possible solution would be to hold the parent's ->d_lock through both checks, but while the in-lookup set is relatively small at any time, dcache is not. And holding the parent's ->d_lock through something like __d_lookup_rcu() would suck too badly. So we leave the parent's ->d_lock alone, which means that we watch out for the following scenario: * we verify that there's no hashed match * existing in-lookup match gets hashed by another process * we verify that there's no in-lookup matches and decide that everything's fine. Solution: per-directory kinda-sorta seqlock, bumped around the times we hash something that used to be in-lookup or move (and hash) something in place of in-lookup. Then the above would turn into * read the counter * do dcache lookup * if no matches found, check for in-lookup matches * if there had been none of those either, check if the counter has changed; repeat if it has. The "kinda-sorta" part is due to the fact that we don't have much spare space in inode. There is a spare word (shared with i_bdev/i_cdev/i_pipe), so the counter part is not a problem, but spinlock is a different story. We could use the parent's ->d_lock, and it would be less painful in terms of contention, for __d_add() it would be rather inconvenient to grab; we could do that (using lock_parent()), but... Fortunately, we can get serialization on the counter itself, and it might be a good idea in general; we can use cmpxchg() in a loop to get from even to odd and smp_store_release() from odd to even. This commit adds the counter and updating logics; the readers will be added in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 04:58:55 +00:00
}
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
write_seqcount_begin(&dentry->d_seq);
write_seqcount_begin_nested(&target->d_seq, DENTRY_D_LOCK_NESTED);
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
/* unhash both */
if (!d_unhashed(dentry))
___d_drop(dentry);
if (!d_unhashed(target))
___d_drop(target);
make non-exchanging __d_move() copy ->d_parent rather than swap them Currently d_move(from, to) does the following: * name/parent of from <- old name/parent of to, from hashed there * to is unhashed * name of to is preserved * if from used to be detached, to gets detached * if from used to be attached, parent of to <- old parent of from. That's both user-visibly bogus and complicates reasoning a lot. Much saner semantics would be * name/parent of from <- name/parent of to, from hashed there. * to is unhashed * name/parent of to is unchanged. The price, of course, is that old parent of from might lose a reference. However, * all potentially cross-directory callers of d_move() have both parents pinned directly; typically, dentries themselves are grabbed only after we have grabbed and locked both parents. IOW, the decrement of old parent's refcount in case of d_move() won't reach zero. * __d_move() from d_splice_alias() is done to detached alias. No refcount decrements in that case * __d_move() from __d_unalias() *can* get the refcount to zero. So let's grab a reference to alias' old parent before calling __d_unalias() and dput() it after we'd dropped rename_lock. That does make d_splice_alias() potentially blocking. However, it has no callers in non-sleepable contexts (and the case where we'd grown that dget/dput pair is _very_ rare, so performance is not an issue). Another thing that needs adjustment is unlocking in the end of __d_move(); folded it in. And cleaned the remnants of bogus ordering from the "lock them in the beginning" counterpart - it's never been right and now (well, for 7 years now) we have that thing always serialized on rename_lock anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-11 04:15:52 +00:00
/* ... and switch them in the tree */
dentry->d_parent = target->d_parent;
if (!exchange) {
Allow sharing external names after __d_move() * external dentry names get a small structure prepended to them (struct external_name). * it contains an atomic refcount, matching the number of struct dentry instances that have ->d_name.name pointing to that external name. The first thing free_dentry() does is decrementing refcount of external name, so the instances that are between the call of free_dentry() and RCU-delayed actual freeing do not contribute. * __d_move(x, y, false) makes the name of x equal to the name of y, external or not. If y has an external name, extra reference is grabbed and put into x->d_name.name. If x used to have an external name, the reference to the old name is dropped and, should it reach zero, freeing is scheduled via kfree_rcu(). * free_dentry() in dentry with external name decrements the refcount of that name and, should it reach zero, does RCU-delayed call that will free both the dentry and external name. Otherwise it does what it used to do, except that __d_free() doesn't even look at ->d_name.name; it simply frees the dentry. All non-RCU accesses to dentry external name are safe wrt freeing since they all should happen before free_dentry() is called. RCU accesses might run into a dentry seen by free_dentry() or into an old name that got already dropped by __d_move(); however, in both cases dentry must have been alive and refer to that name at some point after we'd done rcu_read_lock(), which means that any freeing must be still pending. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-29 18:54:27 +00:00
copy_name(dentry, target);
target->d_hash.pprev = NULL;
make non-exchanging __d_move() copy ->d_parent rather than swap them Currently d_move(from, to) does the following: * name/parent of from <- old name/parent of to, from hashed there * to is unhashed * name of to is preserved * if from used to be detached, to gets detached * if from used to be attached, parent of to <- old parent of from. That's both user-visibly bogus and complicates reasoning a lot. Much saner semantics would be * name/parent of from <- name/parent of to, from hashed there. * to is unhashed * name/parent of to is unchanged. The price, of course, is that old parent of from might lose a reference. However, * all potentially cross-directory callers of d_move() have both parents pinned directly; typically, dentries themselves are grabbed only after we have grabbed and locked both parents. IOW, the decrement of old parent's refcount in case of d_move() won't reach zero. * __d_move() from d_splice_alias() is done to detached alias. No refcount decrements in that case * __d_move() from __d_unalias() *can* get the refcount to zero. So let's grab a reference to alias' old parent before calling __d_unalias() and dput() it after we'd dropped rename_lock. That does make d_splice_alias() potentially blocking. However, it has no callers in non-sleepable contexts (and the case where we'd grown that dget/dput pair is _very_ rare, so performance is not an issue). Another thing that needs adjustment is unlocking in the end of __d_move(); folded it in. And cleaned the remnants of bogus ordering from the "lock them in the beginning" counterpart - it's never been right and now (well, for 7 years now) we have that thing always serialized on rename_lock anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-11 04:15:52 +00:00
dentry->d_parent->d_lockref.count++;
dcache: sort the freeing-without-RCU-delay mess for good. For lockless accesses to dentries we don't have pinned we rely (among other things) upon having an RCU delay between dropping the last reference and actually freeing the memory. On the other hand, for things like pipes and sockets we neither do that kind of lockless access, nor want to deal with the overhead of an RCU delay every time a socket gets closed. So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags made sure it would happen. We tried to avoid setting it unless we knew we need it. Unfortunately, that had led to recurring class of bugs, in which we missed the need to set it. We only really need it for dentries that are created by d_alloc_pseudo(), so let's not bother with trying to be smart - just make having an RCU delay the default. The ones that do *not* get it set the replacement flag (DCACHE_NORCU) and we'd better use that sparingly. d_alloc_pseudo() is the only such user right now. FWIW, the race that finally prompted that switch had been between __lock_parent() of immediate subdirectory of what's currently the root of a disconnected tree (e.g. from open-by-handle in progress) racing with d_splice_alias() elsewhere picking another alias for the same inode, either on outright corrupted fs image, or (in case of open-by-handle on NFS) that subdirectory having been just moved on server. It's not easy to hit, so the sky is not falling, but that's not the first race on similar missed cases and the logics for settinf DCACHE_RCUACCESS has gotten ridiculously convoluted. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-03-16 02:23:19 +00:00
if (dentry != old_parent) /* wasn't IS_ROOT */
make non-exchanging __d_move() copy ->d_parent rather than swap them Currently d_move(from, to) does the following: * name/parent of from <- old name/parent of to, from hashed there * to is unhashed * name of to is preserved * if from used to be detached, to gets detached * if from used to be attached, parent of to <- old parent of from. That's both user-visibly bogus and complicates reasoning a lot. Much saner semantics would be * name/parent of from <- name/parent of to, from hashed there. * to is unhashed * name/parent of to is unchanged. The price, of course, is that old parent of from might lose a reference. However, * all potentially cross-directory callers of d_move() have both parents pinned directly; typically, dentries themselves are grabbed only after we have grabbed and locked both parents. IOW, the decrement of old parent's refcount in case of d_move() won't reach zero. * __d_move() from d_splice_alias() is done to detached alias. No refcount decrements in that case * __d_move() from __d_unalias() *can* get the refcount to zero. So let's grab a reference to alias' old parent before calling __d_unalias() and dput() it after we'd dropped rename_lock. That does make d_splice_alias() potentially blocking. However, it has no callers in non-sleepable contexts (and the case where we'd grown that dget/dput pair is _very_ rare, so performance is not an issue). Another thing that needs adjustment is unlocking in the end of __d_move(); folded it in. And cleaned the remnants of bogus ordering from the "lock them in the beginning" counterpart - it's never been right and now (well, for 7 years now) we have that thing always serialized on rename_lock anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-11 04:15:52 +00:00
WARN_ON(!--old_parent->d_lockref.count);
} else {
make non-exchanging __d_move() copy ->d_parent rather than swap them Currently d_move(from, to) does the following: * name/parent of from <- old name/parent of to, from hashed there * to is unhashed * name of to is preserved * if from used to be detached, to gets detached * if from used to be attached, parent of to <- old parent of from. That's both user-visibly bogus and complicates reasoning a lot. Much saner semantics would be * name/parent of from <- name/parent of to, from hashed there. * to is unhashed * name/parent of to is unchanged. The price, of course, is that old parent of from might lose a reference. However, * all potentially cross-directory callers of d_move() have both parents pinned directly; typically, dentries themselves are grabbed only after we have grabbed and locked both parents. IOW, the decrement of old parent's refcount in case of d_move() won't reach zero. * __d_move() from d_splice_alias() is done to detached alias. No refcount decrements in that case * __d_move() from __d_unalias() *can* get the refcount to zero. So let's grab a reference to alias' old parent before calling __d_unalias() and dput() it after we'd dropped rename_lock. That does make d_splice_alias() potentially blocking. However, it has no callers in non-sleepable contexts (and the case where we'd grown that dget/dput pair is _very_ rare, so performance is not an issue). Another thing that needs adjustment is unlocking in the end of __d_move(); folded it in. And cleaned the remnants of bogus ordering from the "lock them in the beginning" counterpart - it's never been right and now (well, for 7 years now) we have that thing always serialized on rename_lock anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-11 04:15:52 +00:00
target->d_parent = old_parent;
swap_names(dentry, target);
list_move(&target->d_child, &target->d_parent->d_subdirs);
make non-exchanging __d_move() copy ->d_parent rather than swap them Currently d_move(from, to) does the following: * name/parent of from <- old name/parent of to, from hashed there * to is unhashed * name of to is preserved * if from used to be detached, to gets detached * if from used to be attached, parent of to <- old parent of from. That's both user-visibly bogus and complicates reasoning a lot. Much saner semantics would be * name/parent of from <- name/parent of to, from hashed there. * to is unhashed * name/parent of to is unchanged. The price, of course, is that old parent of from might lose a reference. However, * all potentially cross-directory callers of d_move() have both parents pinned directly; typically, dentries themselves are grabbed only after we have grabbed and locked both parents. IOW, the decrement of old parent's refcount in case of d_move() won't reach zero. * __d_move() from d_splice_alias() is done to detached alias. No refcount decrements in that case * __d_move() from __d_unalias() *can* get the refcount to zero. So let's grab a reference to alias' old parent before calling __d_unalias() and dput() it after we'd dropped rename_lock. That does make d_splice_alias() potentially blocking. However, it has no callers in non-sleepable contexts (and the case where we'd grown that dget/dput pair is _very_ rare, so performance is not an issue). Another thing that needs adjustment is unlocking in the end of __d_move(); folded it in. And cleaned the remnants of bogus ordering from the "lock them in the beginning" counterpart - it's never been right and now (well, for 7 years now) we have that thing always serialized on rename_lock anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-11 04:15:52 +00:00
__d_rehash(target);
fsnotify_update_flags(target);
}
make non-exchanging __d_move() copy ->d_parent rather than swap them Currently d_move(from, to) does the following: * name/parent of from <- old name/parent of to, from hashed there * to is unhashed * name of to is preserved * if from used to be detached, to gets detached * if from used to be attached, parent of to <- old parent of from. That's both user-visibly bogus and complicates reasoning a lot. Much saner semantics would be * name/parent of from <- name/parent of to, from hashed there. * to is unhashed * name/parent of to is unchanged. The price, of course, is that old parent of from might lose a reference. However, * all potentially cross-directory callers of d_move() have both parents pinned directly; typically, dentries themselves are grabbed only after we have grabbed and locked both parents. IOW, the decrement of old parent's refcount in case of d_move() won't reach zero. * __d_move() from d_splice_alias() is done to detached alias. No refcount decrements in that case * __d_move() from __d_unalias() *can* get the refcount to zero. So let's grab a reference to alias' old parent before calling __d_unalias() and dput() it after we'd dropped rename_lock. That does make d_splice_alias() potentially blocking. However, it has no callers in non-sleepable contexts (and the case where we'd grown that dget/dput pair is _very_ rare, so performance is not an issue). Another thing that needs adjustment is unlocking in the end of __d_move(); folded it in. And cleaned the remnants of bogus ordering from the "lock them in the beginning" counterpart - it's never been right and now (well, for 7 years now) we have that thing always serialized on rename_lock anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-11 04:15:52 +00:00
list_move(&dentry->d_child, &dentry->d_parent->d_subdirs);
__d_rehash(dentry);
fsnotify_update_flags(dentry);
fscrypt_handle_d_move(dentry);
fs: rcu-walk for path lookup Perform common cases of path lookups without any stores or locking in the ancestor dentry elements. This is called rcu-walk, as opposed to the current algorithm which is a refcount based walk, or ref-walk. This results in far fewer atomic operations on every path element, significantly improving path lookup performance. It also avoids cacheline bouncing on common dentries, significantly improving scalability. The overall design is like this: * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. * Take the RCU lock for the entire path walk, starting with the acquiring of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are not required for dentry persistence. * synchronize_rcu is called when unregistering a filesystem, so we can access d_ops and i_ops during rcu-walk. * Similarly take the vfsmount lock for the entire path walk. So now mnt refcounts are not required for persistence. Also we are free to perform mount lookups, and to assume dentry mount points and mount roots are stable up and down the path. * Have a per-dentry seqlock to protect the dentry name, parent, and inode, so we can load this tuple atomically, and also check whether any of its members have changed. * Dentry lookups (based on parent, candidate string tuple) recheck the parent sequence after the child is found in case anything changed in the parent during the path walk. * inode is also RCU protected so we can load d_inode and use the inode for limited things. * i_mode, i_uid, i_gid can be tested for exec permissions during path walk. * i_op can be loaded. When we reach the destination dentry, we lock it, recheck lookup sequence, and increment its refcount and mountpoint refcount. RCU and vfsmount locks are dropped. This is termed "dropping rcu-walk". If the dentry refcount does not match, we can not drop rcu-walk gracefully at the current point in the lokup, so instead return -ECHILD (for want of a better errno). This signals the path walking code to re-do the entire lookup with a ref-walk. Aside from the final dentry, there are other situations that may be encounted where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take a reference on the last good dentry) and continue with a ref-walk. Again, if we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup using ref-walk. But it is very important that we can continue with ref-walk for most cases, particularly to avoid the overhead of double lookups, and to gain the scalability advantages on common path elements (like cwd and root). The cases where rcu-walk cannot continue are: * NULL dentry (ie. any uncached path element) * parent with d_inode->i_op->permission or ACLs * dentries with d_revalidate * Following links In future patches, permission checks and d_revalidate become rcu-walk aware. It may be possible eventually to make following links rcu-walk aware. Uncached path elements will always require dropping to ref-walk mode, at the very least because i_mutex needs to be grabbed, and objects allocated. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:49:52 +00:00
write_seqcount_end(&target->d_seq);
write_seqcount_end(&dentry->d_seq);
parallel lookups machinery, part 2 We'll need to verify that there's neither a hashed nor in-lookup dentry with desired parent/name before adding to in-lookup set. One possible solution would be to hold the parent's ->d_lock through both checks, but while the in-lookup set is relatively small at any time, dcache is not. And holding the parent's ->d_lock through something like __d_lookup_rcu() would suck too badly. So we leave the parent's ->d_lock alone, which means that we watch out for the following scenario: * we verify that there's no hashed match * existing in-lookup match gets hashed by another process * we verify that there's no in-lookup matches and decide that everything's fine. Solution: per-directory kinda-sorta seqlock, bumped around the times we hash something that used to be in-lookup or move (and hash) something in place of in-lookup. Then the above would turn into * read the counter * do dcache lookup * if no matches found, check for in-lookup matches * if there had been none of those either, check if the counter has changed; repeat if it has. The "kinda-sorta" part is due to the fact that we don't have much spare space in inode. There is a spare word (shared with i_bdev/i_cdev/i_pipe), so the counter part is not a problem, but spinlock is a different story. We could use the parent's ->d_lock, and it would be less painful in terms of contention, for __d_add() it would be rather inconvenient to grab; we could do that (using lock_parent()), but... Fortunately, we can get serialization on the counter itself, and it might be a good idea in general; we can use cmpxchg() in a loop to get from even to odd and smp_store_release() from odd to even. This commit adds the counter and updating logics; the readers will be added in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 04:58:55 +00:00
if (dir)
end_dir_add(dir, n);
make non-exchanging __d_move() copy ->d_parent rather than swap them Currently d_move(from, to) does the following: * name/parent of from <- old name/parent of to, from hashed there * to is unhashed * name of to is preserved * if from used to be detached, to gets detached * if from used to be attached, parent of to <- old parent of from. That's both user-visibly bogus and complicates reasoning a lot. Much saner semantics would be * name/parent of from <- name/parent of to, from hashed there. * to is unhashed * name/parent of to is unchanged. The price, of course, is that old parent of from might lose a reference. However, * all potentially cross-directory callers of d_move() have both parents pinned directly; typically, dentries themselves are grabbed only after we have grabbed and locked both parents. IOW, the decrement of old parent's refcount in case of d_move() won't reach zero. * __d_move() from d_splice_alias() is done to detached alias. No refcount decrements in that case * __d_move() from __d_unalias() *can* get the refcount to zero. So let's grab a reference to alias' old parent before calling __d_unalias() and dput() it after we'd dropped rename_lock. That does make d_splice_alias() potentially blocking. However, it has no callers in non-sleepable contexts (and the case where we'd grown that dget/dput pair is _very_ rare, so performance is not an issue). Another thing that needs adjustment is unlocking in the end of __d_move(); folded it in. And cleaned the remnants of bogus ordering from the "lock them in the beginning" counterpart - it's never been right and now (well, for 7 years now) we have that thing always serialized on rename_lock anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-11 04:15:52 +00:00
if (dentry->d_parent != old_parent)
spin_unlock(&dentry->d_parent->d_lock);
if (dentry != old_parent)
spin_unlock(&old_parent->d_lock);
spin_unlock(&target->d_lock);
spin_unlock(&dentry->d_lock);
}
/*
* d_move - move a dentry
* @dentry: entry to move
* @target: new dentry
*
* Update the dcache to reflect the move of a file name. Negative
* dcache entries should not be moved in this way. See the locking
* requirements for __d_move.
*/
void d_move(struct dentry *dentry, struct dentry *target)
{
write_seqlock(&rename_lock);
__d_move(dentry, target, false);
write_sequnlock(&rename_lock);
}
EXPORT_SYMBOL(d_move);
/*
* d_exchange - exchange two dentries
* @dentry1: first dentry
* @dentry2: second dentry
*/
void d_exchange(struct dentry *dentry1, struct dentry *dentry2)
{
write_seqlock(&rename_lock);
WARN_ON(!dentry1->d_inode);
WARN_ON(!dentry2->d_inode);
WARN_ON(IS_ROOT(dentry1));
WARN_ON(IS_ROOT(dentry2));
__d_move(dentry1, dentry2, true);
write_sequnlock(&rename_lock);
}
/**
* d_ancestor - search for an ancestor
* @p1: ancestor dentry
* @p2: child dentry
*
* Returns the ancestor dentry of p2 which is a child of p1, if p1 is
* an ancestor of p2, else NULL.
*/
struct dentry *d_ancestor(struct dentry *p1, struct dentry *p2)
{
struct dentry *p;
for (p = p2; !IS_ROOT(p); p = p->d_parent) {
if (p->d_parent == p1)
return p;
}
return NULL;
}
/*
* This helper attempts to cope with remotely renamed directories
*
* It assumes that the caller is already holding
* dentry->d_parent->d_inode->i_mutex, and rename_lock
*
* Note: If ever the locking in lock_rename() changes, then please
* remember to update this too...
*/
static int __d_unalias(struct inode *inode,
struct dentry *dentry, struct dentry *alias)
{
struct mutex *m1 = NULL;
struct rw_semaphore *m2 = NULL;
dcache: return -ESTALE not -EBUSY on distributed fs race On a distributed filesystem it's possible for lookup to discover that a directory it just found is already cached elsewhere in the directory heirarchy. The dcache won't let us keep the directory in both places, so we have to move the dentry to the new location from the place we previously had it cached. If the parent has changed, then this requires all the same locks as we'd need to do a cross-directory rename. But we're already in lookup holding one parent's i_mutex, so it's too late to acquire those locks in the right order. The (unreliable) solution in __d_unalias is to trylock() the required locks and return -EBUSY if it fails. I see no particular reason for returning -EBUSY, and -ESTALE is already the result of some other lookup races on NFS. I think -ESTALE is the more helpful error return. It also allows us to take advantage of the logic Jeff Layton added in c6a9428401c0 "vfs: fix renameat to retry on ESTALE errors" and ancestors, which hopefully resolves some of these errors before they're returned to userspace. I can reproduce these cases using NFS with: ssh root@$client ' mount -olookupcache=pos '$server':'$export' /mnt/ mkdir /mnt/TO mkdir /mnt/DIR touch /mnt/DIR/test.txt while true; do strace -e open cat /mnt/DIR/test.txt 2>&1 | grep EBUSY done ' ssh root@$server ' while true; do mv $export/DIR $export/TO/DIR mv $export/TO/DIR $export/DIR done ' It also helps to add some other concurrent use of the directory on the client (e.g., "ls /mnt/TO"). And you can replace the server-side mv's by client-side mv's that are repeatedly killed. (If the client is interrupted while waiting for the RENAME response then it's left with a dentry that has to go under one parent or the other, but it doesn't yet know which.) Acked-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-10 15:55:53 +00:00
int ret = -ESTALE;
/* If alias and dentry share a parent, then no extra locks required */
if (alias->d_parent == dentry->d_parent)
goto out_unalias;
/* See lock_rename() */
if (!mutex_trylock(&dentry->d_sb->s_vfs_rename_mutex))
goto out_err;
m1 = &dentry->d_sb->s_vfs_rename_mutex;
if (!inode_trylock_shared(alias->d_parent->d_inode))
goto out_err;
m2 = &alias->d_parent->d_inode->i_rwsem;
out_unalias:
vfs: Lazily remove mounts on unlinked files and directories. With the introduction of mount namespaces and bind mounts it became possible to access files and directories that on some paths are mount points but are not mount points on other paths. It is very confusing when rm -rf somedir returns -EBUSY simply because somedir is mounted somewhere else. With the addition of user namespaces allowing unprivileged mounts this condition has gone from annoying to allowing a DOS attack on other users in the system. The possibility for mischief is removed by updating the vfs to support rename, unlink and rmdir on a dentry that is a mountpoint and by lazily unmounting mountpoints on deleted dentries. In particular this change allows rename, unlink and rmdir system calls on a dentry without a mountpoint in the current mount namespace to succeed, and it allows rename, unlink, and rmdir performed on a distributed filesystem to update the vfs cache even if when there is a mount in some namespace on the original dentry. There are two common patterns of maintaining mounts: Mounts on trusted paths with the parent directory of the mount point and all ancestory directories up to / owned by root and modifiable only by root (i.e. /media/xxx, /dev, /dev/pts, /proc, /sys, /sys/fs/cgroup/{cpu, cpuacct, ...}, /usr, /usr/local). Mounts on unprivileged directories maintained by fusermount. In the case of mounts in trusted directories owned by root and modifiable only by root the current parent directory permissions are sufficient to ensure a mount point on a trusted path is not removed or renamed by anyone other than root, even if there is a context where the there are no mount points to prevent this. In the case of mounts in directories owned by less privileged users races with users modifying the path of a mount point are already a danger. fusermount already uses a combination of chdir, /proc/<pid>/fd/NNN, and UMOUNT_NOFOLLOW to prevent these races. The removable of global rename, unlink, and rmdir protection really adds nothing new to consider only a widening of the attack window, and fusermount is already safe against unprivileged users modifying the directory simultaneously. In principle for perfect userspace programs returning -EBUSY for unlink, rmdir, and rename of dentires that have mounts in the local namespace is actually unnecessary. Unfortunately not all userspace programs are perfect so retaining -EBUSY for unlink, rmdir and rename of dentries that have mounts in the current mount namespace plays an important role of maintaining consistency with historical behavior and making imperfect userspace applications hard to exploit. v2: Remove spurious old_dentry. v3: Optimized shrink_submounts_and_drop Removed unsued afs label v4: Simplified the changes to check_submounts_and_drop Do not rename check_submounts_and_drop shrink_submounts_and_drop Document what why we need atomicity in check_submounts_and_drop Rely on the parent inode mutex to make d_revalidate and d_invalidate an atomic unit. v5: Refcount the mountpoint to detach in case of simultaneous renames. Reviewed-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-02 01:33:48 +00:00
__d_move(alias, dentry, false);
ret = 0;
out_err:
if (m2)
up_read(m2);
if (m1)
mutex_unlock(m1);
return ret;
}
/**
* d_splice_alias - splice a disconnected dentry into the tree if one exists
* @inode: the inode which may have a disconnected dentry
* @dentry: a negative dentry which we want to point to the inode.
*
* If inode is a directory and has an IS_ROOT alias, then d_move that in
* place of the given dentry and return it, else simply d_add the inode
* to the dentry and return NULL.
*
* If a non-IS_ROOT directory is found, the filesystem is corrupt, and
* we should error out: directories can't have multiple aliases.
*
* This is needed in the lookup routine of any filesystem that is exportable
* (via knfsd) so that we can build dcache paths to directories effectively.
*
* If a dentry was found and moved, then it is returned. Otherwise NULL
* is returned. This matches the expected return value of ->lookup.
*
* Cluster filesystems may call this function with a negative, hashed dentry.
* In that case, we know that the inode will be a regular file, and also this
* will only occur during atomic_open. So we need to check for the dentry
* being already hashed only in the final case.
*/
struct dentry *d_splice_alias(struct inode *inode, struct dentry *dentry)
{
if (IS_ERR(inode))
return ERR_CAST(inode);
BUG_ON(!d_unhashed(dentry));
if (!inode)
goto out;
security_d_instantiate(dentry, inode);
spin_lock(&inode->i_lock);
if (S_ISDIR(inode->i_mode)) {
struct dentry *new = __d_find_any_alias(inode);
if (unlikely(new)) {
/* The reference to new ensures it remains an alias */
spin_unlock(&inode->i_lock);
write_seqlock(&rename_lock);
if (unlikely(d_ancestor(new, dentry))) {
write_sequnlock(&rename_lock);
dput(new);
new = ERR_PTR(-ELOOP);
pr_warn_ratelimited(
"VFS: Lookup of '%s' in %s %s"
" would have caused loop\n",
dentry->d_name.name,
inode->i_sb->s_type->name,
inode->i_sb->s_id);
} else if (!IS_ROOT(new)) {
make non-exchanging __d_move() copy ->d_parent rather than swap them Currently d_move(from, to) does the following: * name/parent of from <- old name/parent of to, from hashed there * to is unhashed * name of to is preserved * if from used to be detached, to gets detached * if from used to be attached, parent of to <- old parent of from. That's both user-visibly bogus and complicates reasoning a lot. Much saner semantics would be * name/parent of from <- name/parent of to, from hashed there. * to is unhashed * name/parent of to is unchanged. The price, of course, is that old parent of from might lose a reference. However, * all potentially cross-directory callers of d_move() have both parents pinned directly; typically, dentries themselves are grabbed only after we have grabbed and locked both parents. IOW, the decrement of old parent's refcount in case of d_move() won't reach zero. * __d_move() from d_splice_alias() is done to detached alias. No refcount decrements in that case * __d_move() from __d_unalias() *can* get the refcount to zero. So let's grab a reference to alias' old parent before calling __d_unalias() and dput() it after we'd dropped rename_lock. That does make d_splice_alias() potentially blocking. However, it has no callers in non-sleepable contexts (and the case where we'd grown that dget/dput pair is _very_ rare, so performance is not an issue). Another thing that needs adjustment is unlocking in the end of __d_move(); folded it in. And cleaned the remnants of bogus ordering from the "lock them in the beginning" counterpart - it's never been right and now (well, for 7 years now) we have that thing always serialized on rename_lock anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-11 04:15:52 +00:00
struct dentry *old_parent = dget(new->d_parent);
int err = __d_unalias(inode, dentry, new);
write_sequnlock(&rename_lock);
if (err) {
dput(new);
new = ERR_PTR(err);
}
make non-exchanging __d_move() copy ->d_parent rather than swap them Currently d_move(from, to) does the following: * name/parent of from <- old name/parent of to, from hashed there * to is unhashed * name of to is preserved * if from used to be detached, to gets detached * if from used to be attached, parent of to <- old parent of from. That's both user-visibly bogus and complicates reasoning a lot. Much saner semantics would be * name/parent of from <- name/parent of to, from hashed there. * to is unhashed * name/parent of to is unchanged. The price, of course, is that old parent of from might lose a reference. However, * all potentially cross-directory callers of d_move() have both parents pinned directly; typically, dentries themselves are grabbed only after we have grabbed and locked both parents. IOW, the decrement of old parent's refcount in case of d_move() won't reach zero. * __d_move() from d_splice_alias() is done to detached alias. No refcount decrements in that case * __d_move() from __d_unalias() *can* get the refcount to zero. So let's grab a reference to alias' old parent before calling __d_unalias() and dput() it after we'd dropped rename_lock. That does make d_splice_alias() potentially blocking. However, it has no callers in non-sleepable contexts (and the case where we'd grown that dget/dput pair is _very_ rare, so performance is not an issue). Another thing that needs adjustment is unlocking in the end of __d_move(); folded it in. And cleaned the remnants of bogus ordering from the "lock them in the beginning" counterpart - it's never been right and now (well, for 7 years now) we have that thing always serialized on rename_lock anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-11 04:15:52 +00:00
dput(old_parent);
} else {
__d_move(new, dentry, false);
write_sequnlock(&rename_lock);
}
iput(inode);
return new;
}
}
out:
__d_add(dentry, inode);
return NULL;
}
EXPORT_SYMBOL(d_splice_alias);
/*
* Test whether new_dentry is a subdirectory of old_dentry.
*
* Trivially implemented using the dcache structure
*/
/**
* is_subdir - is new dentry a subdirectory of old_dentry
* @new_dentry: new dentry
* @old_dentry: old dentry
*
* Returns true if new_dentry is a subdirectory of the parent (at any depth).
* Returns false otherwise.
* Caller must ensure that "new_dentry" is pinned before calling is_subdir()
*/
bool is_subdir(struct dentry *new_dentry, struct dentry *old_dentry)
{
bool result;
unsigned seq;
if (new_dentry == old_dentry)
return true;
do {
/* for restarting inner loop in case of seq retry */
seq = read_seqbegin(&rename_lock);
/*
* Need rcu_readlock to protect against the d_parent trashing
* due to d_move
*/
rcu_read_lock();
if (d_ancestor(old_dentry, new_dentry))
result = true;
else
result = false;
rcu_read_unlock();
} while (read_seqretry(&rename_lock, seq));
return result;
}
EXPORT_SYMBOL(is_subdir);
static enum d_walk_ret d_genocide_kill(void *data, struct dentry *dentry)
{
struct dentry *root = data;
if (dentry != root) {
if (d_unhashed(dentry) || !dentry->d_inode)
return D_WALK_SKIP;
if (!(dentry->d_flags & DCACHE_GENOCIDE)) {
dentry->d_flags |= DCACHE_GENOCIDE;
dentry->d_lockref.count--;
}
}
return D_WALK_CONTINUE;
}
void d_genocide(struct dentry *parent)
{
d_walk(parent, parent, d_genocide_kill);
}
EXPORT_SYMBOL(d_genocide);
void d_tmpfile(struct dentry *dentry, struct inode *inode)
{
inode_dec_link_count(inode);
BUG_ON(dentry->d_name.name != dentry->d_iname ||
!hlist_unhashed(&dentry->d_u.d_alias) ||
!d_unlinked(dentry));
spin_lock(&dentry->d_parent->d_lock);
spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
dentry->d_name.len = sprintf(dentry->d_iname, "#%llu",
(unsigned long long)inode->i_ino);
spin_unlock(&dentry->d_lock);
spin_unlock(&dentry->d_parent->d_lock);
d_instantiate(dentry, inode);
}
EXPORT_SYMBOL(d_tmpfile);
static __initdata unsigned long dhash_entries;
static int __init set_dhash_entries(char *str)
{
if (!str)
return 0;
dhash_entries = simple_strtoul(str, &str, 0);
return 1;
}
__setup("dhash_entries=", set_dhash_entries);
static void __init dcache_init_early(void)
{
/* If hashes are distributed across NUMA nodes, defer
* hash allocation until vmalloc space is available.
*/
if (hashdist)
return;
dentry_hashtable =
alloc_large_system_hash("Dentry cache",
sizeof(struct hlist_bl_head),
dhash_entries,
13,
mm: update callers to use HASH_ZERO flag Update dcache, inode, pid, mountpoint, and mount hash tables to use HASH_ZERO, and remove initialization after allocations. In case of places where HASH_EARLY was used such as in __pv_init_lock_hash the zeroed hash table was already assumed, because memblock zeroes the memory. CPU: SPARC M6, Memory: 7T Before fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 11.798s After fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 3.198s CPU: Intel Xeon E5-2630, Memory: 2.2T: Before fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.245s After fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.244s Link: http://lkml.kernel.org/r/1488432825-92126-4-git-send-email-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:39:11 +00:00
HASH_EARLY | HASH_ZERO,
&d_hash_shift,
NULL,
0,
0);
d_hash_shift = 32 - d_hash_shift;
}
static void __init dcache_init(void)
{
mm: update callers to use HASH_ZERO flag Update dcache, inode, pid, mountpoint, and mount hash tables to use HASH_ZERO, and remove initialization after allocations. In case of places where HASH_EARLY was used such as in __pv_init_lock_hash the zeroed hash table was already assumed, because memblock zeroes the memory. CPU: SPARC M6, Memory: 7T Before fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 11.798s After fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 3.198s CPU: Intel Xeon E5-2630, Memory: 2.2T: Before fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.245s After fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.244s Link: http://lkml.kernel.org/r/1488432825-92126-4-git-send-email-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:39:11 +00:00
/*
* A constructor could be added for stable state like the lists,
* but it is probably not worth it because of the cache nature
mm: update callers to use HASH_ZERO flag Update dcache, inode, pid, mountpoint, and mount hash tables to use HASH_ZERO, and remove initialization after allocations. In case of places where HASH_EARLY was used such as in __pv_init_lock_hash the zeroed hash table was already assumed, because memblock zeroes the memory. CPU: SPARC M6, Memory: 7T Before fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 11.798s After fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 3.198s CPU: Intel Xeon E5-2630, Memory: 2.2T: Before fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.245s After fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.244s Link: http://lkml.kernel.org/r/1488432825-92126-4-git-send-email-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:39:11 +00:00
* of the dcache.
*/
dcache: Define usercopy region in dentry_cache slab cache When a dentry name is short enough, it can be stored directly in the dentry itself (instead in a separate kmalloc allocation). These dentry short names, stored in struct dentry.d_iname and therefore contained in the dentry_cache slab cache, need to be coped to userspace. cache object allocation: fs/dcache.c: __d_alloc(...): ... dentry = kmem_cache_alloc(dentry_cache, ...); ... dentry->d_name.name = dentry->d_iname; example usage trace: filldir+0xb0/0x140 dcache_readdir+0x82/0x170 iterate_dir+0x142/0x1b0 SyS_getdents+0xb5/0x160 fs/readdir.c: (called via ctx.actor by dir_emit) filldir(..., const char *name, ...): ... copy_to_user(..., name, namlen) fs/libfs.c: dcache_readdir(...): ... next = next_positive(dentry, p, 1) ... dir_emit(..., next->d_name.name, ...) In support of usercopy hardening, this patch defines a region in the dentry_cache slab cache in which userspace copy operations are allowed. This region is known as the slab cache's usercopy region. Slab caches can now check that each dynamic copy operation involving cache-managed memory falls entirely within the slab's usercopy region. This patch is modified from Brad Spengler/PaX Team's PAX_USERCOPY whitelisting code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Signed-off-by: David Windsor <dave@nullcore.net> [kees: adjust hunks for kmalloc-specific things moved later] [kees: adjust commit log, provide usage trace] Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-06-11 02:50:44 +00:00
dentry_cache = KMEM_CACHE_USERCOPY(dentry,
SLAB_RECLAIM_ACCOUNT|SLAB_PANIC|SLAB_MEM_SPREAD|SLAB_ACCOUNT,
d_iname);
/* Hash may have been set up in dcache_init_early */
if (!hashdist)
return;
dentry_hashtable =
alloc_large_system_hash("Dentry cache",
sizeof(struct hlist_bl_head),
dhash_entries,
13,
mm: update callers to use HASH_ZERO flag Update dcache, inode, pid, mountpoint, and mount hash tables to use HASH_ZERO, and remove initialization after allocations. In case of places where HASH_EARLY was used such as in __pv_init_lock_hash the zeroed hash table was already assumed, because memblock zeroes the memory. CPU: SPARC M6, Memory: 7T Before fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 11.798s After fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 3.198s CPU: Intel Xeon E5-2630, Memory: 2.2T: Before fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.245s After fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.244s Link: http://lkml.kernel.org/r/1488432825-92126-4-git-send-email-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:39:11 +00:00
HASH_ZERO,
&d_hash_shift,
NULL,
0,
0);
d_hash_shift = 32 - d_hash_shift;
}
/* SLAB cache for __getname() consumers */
struct kmem_cache *names_cachep __read_mostly;
EXPORT_SYMBOL(names_cachep);
void __init vfs_caches_init_early(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(in_lookup_hashtable); i++)
INIT_HLIST_BL_HEAD(&in_lookup_hashtable[i]);
dcache_init_early();
inode_init_early();
}
void __init vfs_caches_init(void)
{
vfs: Define usercopy region in names_cache slab caches VFS pathnames are stored in the names_cache slab cache, either inline or across an entire allocation entry (when approaching PATH_MAX). These are copied to/from userspace, so they must be entirely whitelisted. cache object allocation: include/linux/fs.h: #define __getname() kmem_cache_alloc(names_cachep, GFP_KERNEL) example usage trace: strncpy_from_user+0x4d/0x170 getname_flags+0x6f/0x1f0 user_path_at_empty+0x23/0x40 do_mount+0x69/0xda0 SyS_mount+0x83/0xd0 fs/namei.c: getname_flags(...): ... result = __getname(); ... kname = (char *)result->iname; result->name = kname; len = strncpy_from_user(kname, filename, EMBEDDED_NAME_MAX); ... if (unlikely(len == EMBEDDED_NAME_MAX)) { const size_t size = offsetof(struct filename, iname[1]); kname = (char *)result; result = kzalloc(size, GFP_KERNEL); ... result->name = kname; len = strncpy_from_user(kname, filename, PATH_MAX); In support of usercopy hardening, this patch defines the entire cache object in the names_cache slab cache as whitelisted, since it may entirely hold name strings to be copied to/from userspace. This patch is verbatim from Brad Spengler/PaX Team's PAX_USERCOPY whitelisting code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Signed-off-by: David Windsor <dave@nullcore.net> [kees: adjust commit log, add usage trace] Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-06-11 02:50:30 +00:00
names_cachep = kmem_cache_create_usercopy("names_cache", PATH_MAX, 0,
SLAB_HWCACHE_ALIGN|SLAB_PANIC, 0, PATH_MAX, NULL);
dcache_init();
inode_init();
files_init();
files_maxfiles_init();
mnt_init();
bdev_cache_init();
chrdev_init();
}