linux/fs/splice.c

1784 lines
40 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* "splice": joining two ropes together by interweaving their strands.
*
* This is the "extended pipe" functionality, where a pipe is used as
* an arbitrary in-memory buffer. Think of a pipe as a small kernel
* buffer that you can use to transfer data from one end to the other.
*
* The traditional unix read/write is extended with a "splice()" operation
* that transfers data buffers to or from a pipe buffer.
*
* Named by Larry McVoy, original implementation from Linus, extended by
* Jens to support splicing to files, network, direct splicing, etc and
* fixing lots of bugs.
*
* Copyright (C) 2005-2006 Jens Axboe <axboe@kernel.dk>
* Copyright (C) 2005-2006 Linus Torvalds <torvalds@osdl.org>
* Copyright (C) 2006 Ingo Molnar <mingo@elte.hu>
*
*/
#include <linux/bvec.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/pagemap.h>
#include <linux/splice.h>
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 02:08:01 +00:00
#include <linux/memcontrol.h>
#include <linux/mm_inline.h>
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/export.h>
#include <linux/syscalls.h>
#include <linux/uio.h>
#include <linux/security.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
#include <linux/socket.h>
#include <linux/compat.h>
#include <linux/sched/signal.h>
#include "internal.h"
/*
* Attempt to steal a page from a pipe buffer. This should perhaps go into
* a vm helper function, it's already simplified quite a bit by the
* addition of remove_mapping(). If success is returned, the caller may
* attempt to reuse this page for another destination.
*/
static int page_cache_pipe_buf_steal(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
struct page *page = buf->page;
struct address_space *mapping;
lock_page(page);
mapping = page_mapping(page);
if (mapping) {
WARN_ON(!PageUptodate(page));
/*
* At least for ext2 with nobh option, we need to wait on
* writeback completing on this page, since we'll remove it
* from the pagecache. Otherwise truncate wont wait on the
* page, allowing the disk blocks to be reused by someone else
* before we actually wrote our data to them. fs corruption
* ensues.
*/
wait_on_page_writeback(page);
if (page_has_private(page) &&
!try_to_release_page(page, GFP_KERNEL))
goto out_unlock;
/*
* If we succeeded in removing the mapping, set LRU flag
* and return good.
*/
if (remove_mapping(mapping, page)) {
buf->flags |= PIPE_BUF_FLAG_LRU;
return 0;
}
}
/*
* Raced with truncate or failed to remove page from current
* address space, unlock and return failure.
*/
out_unlock:
unlock_page(page);
return 1;
}
static void page_cache_pipe_buf_release(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(buf->page);
buf->flags &= ~PIPE_BUF_FLAG_LRU;
}
/*
* Check whether the contents of buf is OK to access. Since the content
* is a page cache page, IO may be in flight.
*/
static int page_cache_pipe_buf_confirm(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
struct page *page = buf->page;
int err;
if (!PageUptodate(page)) {
lock_page(page);
/*
* Page got truncated/unhashed. This will cause a 0-byte
* splice, if this is the first page.
*/
if (!page->mapping) {
err = -ENODATA;
goto error;
}
/*
* Uh oh, read-error from disk.
*/
if (!PageUptodate(page)) {
err = -EIO;
goto error;
}
/*
* Page is ok afterall, we are done.
*/
unlock_page(page);
}
return 0;
error:
unlock_page(page);
return err;
}
const struct pipe_buf_operations page_cache_pipe_buf_ops = {
.confirm = page_cache_pipe_buf_confirm,
.release = page_cache_pipe_buf_release,
.steal = page_cache_pipe_buf_steal,
.get = generic_pipe_buf_get,
};
static int user_page_pipe_buf_steal(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
if (!(buf->flags & PIPE_BUF_FLAG_GIFT))
return 1;
buf->flags |= PIPE_BUF_FLAG_LRU;
return generic_pipe_buf_steal(pipe, buf);
}
static const struct pipe_buf_operations user_page_pipe_buf_ops = {
.confirm = generic_pipe_buf_confirm,
.release = page_cache_pipe_buf_release,
.steal = user_page_pipe_buf_steal,
.get = generic_pipe_buf_get,
};
static void wakeup_pipe_readers(struct pipe_inode_info *pipe)
{
smp_mb();
if (waitqueue_active(&pipe->wait))
wake_up_interruptible(&pipe->wait);
kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
}
/**
* splice_to_pipe - fill passed data into a pipe
* @pipe: pipe to fill
* @spd: data to fill
*
* Description:
* @spd contains a map of pages and len/offset tuples, along with
* the struct pipe_buf_operations associated with these pages. This
* function will link that data to the pipe.
*
*/
ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
struct splice_pipe_desc *spd)
{
unsigned int spd_pages = spd->nr_pages;
int ret = 0, page_nr = 0;
splice: handle zero nr_pages in splice_to_pipe() Running the following command: busybox cat /sys/kernel/debug/tracing/trace_pipe > /dev/null with any tracing enabled pretty very quickly leads to various NULL pointer dereferences and VM BUG_ON()s, such as these: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffff8119df6c>] generic_pipe_buf_release+0xc/0x40 Call Trace: [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0 [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10 [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0 [<ffffffff81196869>] do_sendfile+0x199/0x380 [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0 [<ffffffff8192cbee>] entry_SYSCALL_64_fastpath+0x12/0x6d page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0) kernel BUG at include/linux/mm.h:367! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC RIP: [<ffffffff8119df9c>] generic_pipe_buf_release+0x3c/0x40 Call Trace: [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0 [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10 [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0 [<ffffffff81196869>] do_sendfile+0x199/0x380 [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0 [<ffffffff8192cd1e>] tracesys_phase2+0x84/0x89 (busybox's cat uses sendfile(2), unlike the coreutils version) This is because tracing_splice_read_pipe() can call splice_to_pipe() with spd->nr_pages == 0. spd_pages underflows in splice_to_pipe() and we fill the page pointers and the other fields of the pipe_buffers with garbage. All other callers of splice_to_pipe() avoid calling it when nr_pages == 0, and we could make tracing_splice_read_pipe() do that too, but it seems reasonable to have splice_to_page() handle this condition gracefully. Cc: stable@vger.kernel.org Signed-off-by: Rabin Vincent <rabin@rab.in> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-10 20:19:06 +00:00
if (!spd_pages)
return 0;
if (unlikely(!pipe->readers)) {
send_sig(SIGPIPE, current, 0);
ret = -EPIPE;
goto out;
}
while (pipe->nrbufs < pipe->buffers) {
int newbuf = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);
struct pipe_buffer *buf = pipe->bufs + newbuf;
buf->page = spd->pages[page_nr];
buf->offset = spd->partial[page_nr].offset;
buf->len = spd->partial[page_nr].len;
buf->private = spd->partial[page_nr].private;
buf->ops = spd->ops;
buf->flags = 0;
pipe->nrbufs++;
page_nr++;
ret += buf->len;
if (!--spd->nr_pages)
break;
}
if (!ret)
ret = -EAGAIN;
out:
while (page_nr < spd_pages)
spd->spd_release(spd, page_nr++);
return ret;
}
EXPORT_SYMBOL_GPL(splice_to_pipe);
ssize_t add_to_pipe(struct pipe_inode_info *pipe, struct pipe_buffer *buf)
{
int ret;
if (unlikely(!pipe->readers)) {
send_sig(SIGPIPE, current, 0);
ret = -EPIPE;
} else if (pipe->nrbufs == pipe->buffers) {
ret = -EAGAIN;
} else {
int newbuf = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);
pipe->bufs[newbuf] = *buf;
pipe->nrbufs++;
return buf->len;
}
pipe_buf_release(pipe, buf);
return ret;
}
EXPORT_SYMBOL(add_to_pipe);
/*
* Check if we need to grow the arrays holding pages and partial page
* descriptions.
*/
int splice_grow_spd(const struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
{
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 21:07:29 +00:00
unsigned int buffers = READ_ONCE(pipe->buffers);
spd->nr_pages_max = buffers;
if (buffers <= PIPE_DEF_BUFFERS)
return 0;
treewide: kmalloc() -> kmalloc_array() The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 20:55:00 +00:00
spd->pages = kmalloc_array(buffers, sizeof(struct page *), GFP_KERNEL);
spd->partial = kmalloc_array(buffers, sizeof(struct partial_page),
GFP_KERNEL);
if (spd->pages && spd->partial)
return 0;
kfree(spd->pages);
kfree(spd->partial);
return -ENOMEM;
}
void splice_shrink_spd(struct splice_pipe_desc *spd)
{
if (spd->nr_pages_max <= PIPE_DEF_BUFFERS)
return;
kfree(spd->pages);
kfree(spd->partial);
}
/**
* generic_file_splice_read - splice data from file to a pipe
* @in: file to splice from
* @ppos: position in @in
* @pipe: pipe to splice to
* @len: number of bytes to splice
* @flags: splice modifier flags
*
* Description:
* Will read pages from given file and fill them into a pipe. Can be
* used as long as it has more or less sane ->read_iter().
*
*/
ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
struct pipe_inode_info *pipe, size_t len,
unsigned int flags)
{
struct iov_iter to;
struct kiocb kiocb;
int idx, ret;
iov_iter_pipe(&to, READ, pipe, len);
idx = to.idx;
init_sync_kiocb(&kiocb, in);
kiocb.ki_pos = *ppos;
ret = call_read_iter(in, &kiocb, &to);
if (ret > 0) {
*ppos = kiocb.ki_pos;
file_accessed(in);
} else if (ret < 0) {
to.idx = idx;
to.iov_offset = 0;
iov_iter_advance(&to, 0); /* to free what was emitted */
/*
* callers of ->splice_read() expect -EAGAIN on
* "can't put anything in there", rather than -EFAULT.
*/
if (ret == -EFAULT)
ret = -EAGAIN;
}
return ret;
}
EXPORT_SYMBOL(generic_file_splice_read);
const struct pipe_buf_operations default_pipe_buf_ops = {
.confirm = generic_pipe_buf_confirm,
.release = generic_pipe_buf_release,
.steal = generic_pipe_buf_steal,
.get = generic_pipe_buf_get,
};
2019-04-04 21:59:25 +00:00
int generic_pipe_buf_nosteal(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
return 1;
}
/* Pipe buffer operations for a socket and similar. */
const struct pipe_buf_operations nosteal_pipe_buf_ops = {
.confirm = generic_pipe_buf_confirm,
.release = generic_pipe_buf_release,
.steal = generic_pipe_buf_nosteal,
.get = generic_pipe_buf_get,
};
EXPORT_SYMBOL(nosteal_pipe_buf_ops);
static ssize_t kernel_readv(struct file *file, const struct kvec *vec,
unsigned long vlen, loff_t offset)
{
mm_segment_t old_fs;
loff_t pos = offset;
ssize_t res;
old_fs = get_fs();
set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
res = vfs_readv(file, (const struct iovec __user *)vec, vlen, &pos, 0);
set_fs(old_fs);
return res;
}
static ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
struct pipe_inode_info *pipe, size_t len,
unsigned int flags)
{
struct kvec *vec, __vec[PIPE_DEF_BUFFERS];
struct iov_iter to;
struct page **pages;
unsigned int nr_pages;
size_t offset, base, copied = 0;
ssize_t res;
int i;
if (pipe->nrbufs == pipe->buffers)
return -EAGAIN;
/*
* Try to keep page boundaries matching to source pagecache ones -
* it probably won't be much help, but...
*/
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
offset = *ppos & ~PAGE_MASK;
iov_iter_pipe(&to, READ, pipe, len + offset);
res = iov_iter_get_pages_alloc(&to, &pages, len + offset, &base);
if (res <= 0)
return -ENOMEM;
nr_pages = DIV_ROUND_UP(res + base, PAGE_SIZE);
vec = __vec;
if (nr_pages > PIPE_DEF_BUFFERS) {
treewide: kmalloc() -> kmalloc_array() The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 20:55:00 +00:00
vec = kmalloc_array(nr_pages, sizeof(struct kvec), GFP_KERNEL);
if (unlikely(!vec)) {
res = -ENOMEM;
goto out;
}
}
pipe->bufs[to.idx].offset = offset;
pipe->bufs[to.idx].len -= offset;
for (i = 0; i < nr_pages; i++) {
size_t this_len = min_t(size_t, len, PAGE_SIZE - offset);
vec[i].iov_base = page_address(pages[i]) + offset;
vec[i].iov_len = this_len;
len -= this_len;
offset = 0;
}
res = kernel_readv(in, vec, nr_pages, *ppos);
if (res > 0) {
copied = res;
*ppos += res;
}
if (vec != __vec)
kfree(vec);
out:
for (i = 0; i < nr_pages; i++)
put_page(pages[i]);
kvfree(pages);
iov_iter_advance(&to, copied); /* truncates and discards */
return res;
}
/*
* Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
* using sendpage(). Return the number of bytes sent.
*/
static int pipe_to_sendpage(struct pipe_inode_info *pipe,
struct pipe_buffer *buf, struct splice_desc *sd)
{
struct file *file = sd->u.file;
loff_t pos = sd->pos;
int more;
if (!likely(file->f_op->sendpage))
return -EINVAL;
more = (sd->flags & SPLICE_F_MORE) ? MSG_MORE : 0;
if (sd->len < sd->total_len && pipe->nrbufs > 1)
more |= MSG_SENDPAGE_NOTLAST;
return file->f_op->sendpage(file, buf->page, buf->offset,
sd->len, &pos, more);
}
static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
{
smp_mb();
if (waitqueue_active(&pipe->wait))
wake_up_interruptible(&pipe->wait);
kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
}
/**
* splice_from_pipe_feed - feed available data from a pipe to a file
* @pipe: pipe to splice from
* @sd: information to @actor
* @actor: handler that splices the data
*
* Description:
* This function loops over the pipe and calls @actor to do the
* actual moving of a single struct pipe_buffer to the desired
* destination. It returns when there's no more buffers left in
* the pipe or if the requested number of bytes (@sd->total_len)
* have been copied. It returns a positive number (one) if the
* pipe needs to be filled with more data, zero if the required
* number of bytes have been copied and -errno on error.
*
* This, together with splice_from_pipe_{begin,end,next}, may be
* used to implement the functionality of __splice_from_pipe() when
* locking is required around copying the pipe buffers to the
* destination.
*/
static int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd,
splice_actor *actor)
{
int ret;
while (pipe->nrbufs) {
struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
sd->len = buf->len;
if (sd->len > sd->total_len)
sd->len = sd->total_len;
ret = pipe_buf_confirm(pipe, buf);
if (unlikely(ret)) {
if (ret == -ENODATA)
ret = 0;
return ret;
}
ret = actor(pipe, buf, sd);
if (ret <= 0)
return ret;
buf->offset += ret;
buf->len -= ret;
sd->num_spliced += ret;
sd->len -= ret;
sd->pos += ret;
sd->total_len -= ret;
if (!buf->len) {
pipe_buf_release(pipe, buf);
pipe->curbuf = (pipe->curbuf + 1) & (pipe->buffers - 1);
pipe->nrbufs--;
if (pipe->files)
sd->need_wakeup = true;
}
if (!sd->total_len)
return 0;
}
return 1;
}
/**
* splice_from_pipe_next - wait for some data to splice from
* @pipe: pipe to splice from
* @sd: information about the splice operation
*
* Description:
* This function will wait for some data and return a positive
* value (one) if pipe buffers are available. It will return zero
* or -errno if no more data needs to be spliced.
*/
static int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
{
/*
* Check for signal early to make process killable when there are
* always buffers available
*/
if (signal_pending(current))
return -ERESTARTSYS;
while (!pipe->nrbufs) {
if (!pipe->writers)
return 0;
if (!pipe->waiting_writers && sd->num_spliced)
return 0;
if (sd->flags & SPLICE_F_NONBLOCK)
return -EAGAIN;
if (signal_pending(current))
return -ERESTARTSYS;
if (sd->need_wakeup) {
wakeup_pipe_writers(pipe);
sd->need_wakeup = false;
}
pipe_wait(pipe);
}
return 1;
}
/**
* splice_from_pipe_begin - start splicing from pipe
* @sd: information about the splice operation
*
* Description:
* This function should be called before a loop containing
* splice_from_pipe_next() and splice_from_pipe_feed() to
* initialize the necessary fields of @sd.
*/
static void splice_from_pipe_begin(struct splice_desc *sd)
{
sd->num_spliced = 0;
sd->need_wakeup = false;
}
/**
* splice_from_pipe_end - finish splicing from pipe
* @pipe: pipe to splice from
* @sd: information about the splice operation
*
* Description:
* This function will wake up pipe writers if necessary. It should
* be called after a loop containing splice_from_pipe_next() and
* splice_from_pipe_feed().
*/
static void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd)
{
if (sd->need_wakeup)
wakeup_pipe_writers(pipe);
}
/**
* __splice_from_pipe - splice data from a pipe to given actor
* @pipe: pipe to splice from
* @sd: information to @actor
* @actor: handler that splices the data
*
* Description:
* This function does little more than loop over the pipe and call
* @actor to do the actual moving of a single struct pipe_buffer to
* the desired destination. See pipe_to_file, pipe_to_sendpage, or
* pipe_to_user.
*
*/
ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
splice_actor *actor)
{
int ret;
splice_from_pipe_begin(sd);
do {
cond_resched();
ret = splice_from_pipe_next(pipe, sd);
if (ret > 0)
ret = splice_from_pipe_feed(pipe, sd, actor);
} while (ret > 0);
splice_from_pipe_end(pipe, sd);
return sd->num_spliced ? sd->num_spliced : ret;
}
EXPORT_SYMBOL(__splice_from_pipe);
/**
* splice_from_pipe - splice data from a pipe to a file
* @pipe: pipe to splice from
* @out: file to splice to
* @ppos: position in @out
* @len: how many bytes to splice
* @flags: splice modifier flags
* @actor: handler that splices the data
*
* Description:
* See __splice_from_pipe. This function locks the pipe inode,
* otherwise it's identical to __splice_from_pipe().
*
*/
ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
loff_t *ppos, size_t len, unsigned int flags,
splice_actor *actor)
{
ssize_t ret;
struct splice_desc sd = {
.total_len = len,
.flags = flags,
.pos = *ppos,
.u.file = out,
};
pipe_lock(pipe);
ret = __splice_from_pipe(pipe, &sd, actor);
pipe_unlock(pipe);
return ret;
}
/**
* iter_file_splice_write - splice data from a pipe to a file
* @pipe: pipe info
* @out: file to write to
* @ppos: position in @out
* @len: number of bytes to splice
* @flags: splice modifier flags
*
* Description:
* Will either move or copy pages (determined by @flags options) from
* the given pipe inode to the given file.
* This one is ->write_iter-based.
*
*/
ssize_t
iter_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
loff_t *ppos, size_t len, unsigned int flags)
{
struct splice_desc sd = {
.total_len = len,
.flags = flags,
.pos = *ppos,
.u.file = out,
};
int nbufs = pipe->buffers;
struct bio_vec *array = kcalloc(nbufs, sizeof(struct bio_vec),
GFP_KERNEL);
ssize_t ret;
if (unlikely(!array))
return -ENOMEM;
pipe_lock(pipe);
splice_from_pipe_begin(&sd);
while (sd.total_len) {
struct iov_iter from;
size_t left;
int n, idx;
ret = splice_from_pipe_next(pipe, &sd);
if (ret <= 0)
break;
if (unlikely(nbufs < pipe->buffers)) {
kfree(array);
nbufs = pipe->buffers;
array = kcalloc(nbufs, sizeof(struct bio_vec),
GFP_KERNEL);
if (!array) {
ret = -ENOMEM;
break;
}
}
/* build the vector */
left = sd.total_len;
for (n = 0, idx = pipe->curbuf; left && n < pipe->nrbufs; n++, idx++) {
struct pipe_buffer *buf = pipe->bufs + idx;
size_t this_len = buf->len;
if (this_len > left)
this_len = left;
if (idx == pipe->buffers - 1)
idx = -1;
ret = pipe_buf_confirm(pipe, buf);
if (unlikely(ret)) {
if (ret == -ENODATA)
ret = 0;
goto done;
}
array[n].bv_page = buf->page;
array[n].bv_len = this_len;
array[n].bv_offset = buf->offset;
left -= this_len;
}
iov_iter_bvec(&from, WRITE, array, n, sd.total_len - left);
ret = vfs_iter_write(out, &from, &sd.pos, 0);
if (ret <= 0)
break;
sd.num_spliced += ret;
sd.total_len -= ret;
*ppos = sd.pos;
/* dismiss the fully eaten buffers, adjust the partial one */
while (ret) {
struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
if (ret >= buf->len) {
ret -= buf->len;
buf->len = 0;
pipe_buf_release(pipe, buf);
pipe->curbuf = (pipe->curbuf + 1) & (pipe->buffers - 1);
pipe->nrbufs--;
if (pipe->files)
sd.need_wakeup = true;
} else {
buf->offset += ret;
buf->len -= ret;
ret = 0;
}
}
}
done:
kfree(array);
splice_from_pipe_end(pipe, &sd);
pipe_unlock(pipe);
if (sd.num_spliced)
ret = sd.num_spliced;
return ret;
}
EXPORT_SYMBOL(iter_file_splice_write);
static int write_pipe_buf(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
struct splice_desc *sd)
{
int ret;
void *data;
loff_t tmp = sd->pos;
data = kmap(buf->page);
ret = __kernel_write(sd->u.file, data + buf->offset, sd->len, &tmp);
kunmap(buf->page);
return ret;
}
static ssize_t default_file_splice_write(struct pipe_inode_info *pipe,
struct file *out, loff_t *ppos,
size_t len, unsigned int flags)
{
ssize_t ret;
ret = splice_from_pipe(pipe, out, ppos, len, flags, write_pipe_buf);
if (ret > 0)
*ppos += ret;
return ret;
}
/**
* generic_splice_sendpage - splice data from a pipe to a socket
* @pipe: pipe to splice from
* @out: socket to write to
* @ppos: position in @out
* @len: number of bytes to splice
* @flags: splice modifier flags
*
* Description:
* Will send @len bytes from the pipe to a network socket. No data copying
* is involved.
*
*/
ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
loff_t *ppos, size_t len, unsigned int flags)
{
return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage);
}
EXPORT_SYMBOL(generic_splice_sendpage);
/*
* Attempt to initiate a splice from pipe to file.
*/
static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
loff_t *ppos, size_t len, unsigned int flags)
{
ssize_t (*splice_write)(struct pipe_inode_info *, struct file *,
loff_t *, size_t, unsigned int);
if (out->f_op->splice_write)
splice_write = out->f_op->splice_write;
else
splice_write = default_file_splice_write;
return splice_write(pipe, out, ppos, len, flags);
}
/*
* Attempt to initiate a splice from a file to a pipe.
*/
static long do_splice_to(struct file *in, loff_t *ppos,
struct pipe_inode_info *pipe, size_t len,
unsigned int flags)
{
ssize_t (*splice_read)(struct file *, loff_t *,
struct pipe_inode_info *, size_t, unsigned int);
int ret;
if (unlikely(!(in->f_mode & FMODE_READ)))
return -EBADF;
ret = rw_verify_area(READ, in, ppos, len);
if (unlikely(ret < 0))
return ret;
if (unlikely(len > MAX_RW_COUNT))
len = MAX_RW_COUNT;
if (in->f_op->splice_read)
splice_read = in->f_op->splice_read;
else
splice_read = default_file_splice_read;
return splice_read(in, ppos, pipe, len, flags);
}
/**
* splice_direct_to_actor - splices data directly between two non-pipes
* @in: file to splice from
* @sd: actor information on where to splice to
* @actor: handles the data splicing
*
* Description:
* This is a special case helper to splice directly between two
* points, without requiring an explicit pipe. Internally an allocated
* pipe is cached in the process, and reused during the lifetime of
* that process.
*
*/
ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
splice_direct_actor *actor)
{
struct pipe_inode_info *pipe;
long ret, bytes;
umode_t i_mode;
size_t len;
splice: sendfile() at once fails for big files Using sendfile with below small program to get MD5 sums of some files, it appear that big files (over 64kbytes with 4k pages system) get a wrong MD5 sum while small files get the correct sum. This program uses sendfile() to send a file to an AF_ALG socket for hashing. /* md5sum2.c */ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <sys/socket.h> #include <sys/stat.h> #include <sys/types.h> #include <linux/if_alg.h> int main(int argc, char **argv) { int sk = socket(AF_ALG, SOCK_SEQPACKET, 0); struct stat st; struct sockaddr_alg sa = { .salg_family = AF_ALG, .salg_type = "hash", .salg_name = "md5", }; int n; bind(sk, (struct sockaddr*)&sa, sizeof(sa)); for (n = 1; n < argc; n++) { int size; int offset = 0; char buf[4096]; int fd; int sko; int i; fd = open(argv[n], O_RDONLY); sko = accept(sk, NULL, 0); fstat(fd, &st); size = st.st_size; sendfile(sko, fd, &offset, size); size = read(sko, buf, sizeof(buf)); for (i = 0; i < size; i++) printf("%2.2x", buf[i]); printf(" %s\n", argv[n]); close(fd); close(sko); } exit(0); } Test below is done using official linux patch files. First result is with a software based md5sum. Second result is with the program above. root@vgoip:~# ls -l patch-3.6.* -rw-r--r-- 1 root root 64011 Aug 24 12:01 patch-3.6.2.gz -rw-r--r-- 1 root root 94131 Aug 24 12:01 patch-3.6.3.gz root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz 5fd77b24e68bb24dcc72d6e57c64790e patch-3.6.3.gz After investivation, it appears that sendfile() sends the files by blocks of 64kbytes (16 times PAGE_SIZE). The problem is that at the end of each block, the SPLICE_F_MORE flag is missing, therefore the hashing operation is reset as if it was the end of the file. This patch adds SPLICE_F_MORE to the flags when more data is pending. With the patch applied, we get the correct sums: root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-06 15:26:47 +00:00
int i, flags, more;
/*
* We require the input being a regular file, as we don't want to
* randomly drop data for eg socket -> socket splicing. Use the
* piped splicing for that!
*/
i_mode = file_inode(in)->i_mode;
if (unlikely(!S_ISREG(i_mode) && !S_ISBLK(i_mode)))
return -EINVAL;
/*
* neither in nor out is a pipe, setup an internal pipe attached to
* 'out' and transfer the wanted data from 'in' to 'out' through that
*/
pipe = current->splice_pipe;
if (unlikely(!pipe)) {
pipe = alloc_pipe_info();
if (!pipe)
return -ENOMEM;
/*
* We don't have an immediate reader, but we'll read the stuff
* out of the pipe right after the splice_to_pipe(). So set
* PIPE_READERS appropriately.
*/
pipe->readers = 1;
current->splice_pipe = pipe;
}
/*
* Do the splice.
*/
ret = 0;
bytes = 0;
len = sd->total_len;
flags = sd->flags;
/*
* Don't block on output, we have to drain the direct pipe.
*/
sd->flags &= ~SPLICE_F_NONBLOCK;
splice: sendfile() at once fails for big files Using sendfile with below small program to get MD5 sums of some files, it appear that big files (over 64kbytes with 4k pages system) get a wrong MD5 sum while small files get the correct sum. This program uses sendfile() to send a file to an AF_ALG socket for hashing. /* md5sum2.c */ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <sys/socket.h> #include <sys/stat.h> #include <sys/types.h> #include <linux/if_alg.h> int main(int argc, char **argv) { int sk = socket(AF_ALG, SOCK_SEQPACKET, 0); struct stat st; struct sockaddr_alg sa = { .salg_family = AF_ALG, .salg_type = "hash", .salg_name = "md5", }; int n; bind(sk, (struct sockaddr*)&sa, sizeof(sa)); for (n = 1; n < argc; n++) { int size; int offset = 0; char buf[4096]; int fd; int sko; int i; fd = open(argv[n], O_RDONLY); sko = accept(sk, NULL, 0); fstat(fd, &st); size = st.st_size; sendfile(sko, fd, &offset, size); size = read(sko, buf, sizeof(buf)); for (i = 0; i < size; i++) printf("%2.2x", buf[i]); printf(" %s\n", argv[n]); close(fd); close(sko); } exit(0); } Test below is done using official linux patch files. First result is with a software based md5sum. Second result is with the program above. root@vgoip:~# ls -l patch-3.6.* -rw-r--r-- 1 root root 64011 Aug 24 12:01 patch-3.6.2.gz -rw-r--r-- 1 root root 94131 Aug 24 12:01 patch-3.6.3.gz root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz 5fd77b24e68bb24dcc72d6e57c64790e patch-3.6.3.gz After investivation, it appears that sendfile() sends the files by blocks of 64kbytes (16 times PAGE_SIZE). The problem is that at the end of each block, the SPLICE_F_MORE flag is missing, therefore the hashing operation is reset as if it was the end of the file. This patch adds SPLICE_F_MORE to the flags when more data is pending. With the patch applied, we get the correct sums: root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-06 15:26:47 +00:00
more = sd->flags & SPLICE_F_MORE;
WARN_ON_ONCE(pipe->nrbufs != 0);
while (len) {
size_t read_len;
loff_t pos = sd->pos, prev_pos = pos;
/* Don't try to read more the pipe has space for. */
read_len = min_t(size_t, len,
(pipe->buffers - pipe->nrbufs) << PAGE_SHIFT);
ret = do_splice_to(in, &pos, pipe, read_len, flags);
if (unlikely(ret <= 0))
goto out_release;
read_len = ret;
sd->total_len = read_len;
splice: sendfile() at once fails for big files Using sendfile with below small program to get MD5 sums of some files, it appear that big files (over 64kbytes with 4k pages system) get a wrong MD5 sum while small files get the correct sum. This program uses sendfile() to send a file to an AF_ALG socket for hashing. /* md5sum2.c */ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <sys/socket.h> #include <sys/stat.h> #include <sys/types.h> #include <linux/if_alg.h> int main(int argc, char **argv) { int sk = socket(AF_ALG, SOCK_SEQPACKET, 0); struct stat st; struct sockaddr_alg sa = { .salg_family = AF_ALG, .salg_type = "hash", .salg_name = "md5", }; int n; bind(sk, (struct sockaddr*)&sa, sizeof(sa)); for (n = 1; n < argc; n++) { int size; int offset = 0; char buf[4096]; int fd; int sko; int i; fd = open(argv[n], O_RDONLY); sko = accept(sk, NULL, 0); fstat(fd, &st); size = st.st_size; sendfile(sko, fd, &offset, size); size = read(sko, buf, sizeof(buf)); for (i = 0; i < size; i++) printf("%2.2x", buf[i]); printf(" %s\n", argv[n]); close(fd); close(sko); } exit(0); } Test below is done using official linux patch files. First result is with a software based md5sum. Second result is with the program above. root@vgoip:~# ls -l patch-3.6.* -rw-r--r-- 1 root root 64011 Aug 24 12:01 patch-3.6.2.gz -rw-r--r-- 1 root root 94131 Aug 24 12:01 patch-3.6.3.gz root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz 5fd77b24e68bb24dcc72d6e57c64790e patch-3.6.3.gz After investivation, it appears that sendfile() sends the files by blocks of 64kbytes (16 times PAGE_SIZE). The problem is that at the end of each block, the SPLICE_F_MORE flag is missing, therefore the hashing operation is reset as if it was the end of the file. This patch adds SPLICE_F_MORE to the flags when more data is pending. With the patch applied, we get the correct sums: root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-06 15:26:47 +00:00
/*
* If more data is pending, set SPLICE_F_MORE
* If this is the last data and SPLICE_F_MORE was not set
* initially, clears it.
*/
if (read_len < len)
sd->flags |= SPLICE_F_MORE;
else if (!more)
sd->flags &= ~SPLICE_F_MORE;
/*
* NOTE: nonblocking mode only applies to the input. We
* must not do the output in nonblocking mode as then we
* could get stuck data in the internal pipe:
*/
ret = actor(pipe, sd);
if (unlikely(ret <= 0)) {
sd->pos = prev_pos;
goto out_release;
}
bytes += ret;
len -= ret;
sd->pos = pos;
if (ret < read_len) {
sd->pos = prev_pos + ret;
goto out_release;
}
}
done:
pipe->nrbufs = pipe->curbuf = 0;
file_accessed(in);
return bytes;
out_release:
/*
* If we did an incomplete transfer we must release
* the pipe buffers in question:
*/
for (i = 0; i < pipe->buffers; i++) {
struct pipe_buffer *buf = pipe->bufs + i;
if (buf->ops)
pipe_buf_release(pipe, buf);
}
if (!bytes)
bytes = ret;
goto done;
}
EXPORT_SYMBOL(splice_direct_to_actor);
static int direct_splice_actor(struct pipe_inode_info *pipe,
struct splice_desc *sd)
{
struct file *file = sd->u.file;
return do_splice_from(pipe, file, sd->opos, sd->total_len,
sd->flags);
}
/**
* do_splice_direct - splices data directly between two files
* @in: file to splice from
* @ppos: input file offset
* @out: file to splice to
* @opos: output file offset
* @len: number of bytes to splice
* @flags: splice modifier flags
*
* Description:
* For use by do_sendfile(). splice can easily emulate sendfile, but
* doing it in the application would incur an extra system call
* (splice in + splice out, as compared to just sendfile()). So this helper
* can splice directly through a process-private pipe.
*
*/
long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
loff_t *opos, size_t len, unsigned int flags)
{
struct splice_desc sd = {
.len = len,
.total_len = len,
.flags = flags,
.pos = *ppos,
.u.file = out,
.opos = opos,
};
long ret;
if (unlikely(!(out->f_mode & FMODE_WRITE)))
return -EBADF;
if (unlikely(out->f_flags & O_APPEND))
return -EINVAL;
ret = rw_verify_area(WRITE, out, opos, len);
if (unlikely(ret < 0))
return ret;
ret = splice_direct_to_actor(in, &sd, direct_splice_actor);
if (ret > 0)
*ppos = sd.pos;
return ret;
}
EXPORT_SYMBOL(do_splice_direct);
static int wait_for_space(struct pipe_inode_info *pipe, unsigned flags)
{
for (;;) {
if (unlikely(!pipe->readers)) {
send_sig(SIGPIPE, current, 0);
return -EPIPE;
}
if (pipe->nrbufs != pipe->buffers)
return 0;
if (flags & SPLICE_F_NONBLOCK)
return -EAGAIN;
if (signal_pending(current))
return -ERESTARTSYS;
pipe->waiting_writers++;
pipe_wait(pipe);
pipe->waiting_writers--;
}
}
static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
struct pipe_inode_info *opipe,
size_t len, unsigned int flags);
/*
* Determine where to splice to/from.
*/
static long do_splice(struct file *in, loff_t __user *off_in,
struct file *out, loff_t __user *off_out,
size_t len, unsigned int flags)
{
struct pipe_inode_info *ipipe;
struct pipe_inode_info *opipe;
loff_t offset;
long ret;
ipipe = get_pipe_info(in);
opipe = get_pipe_info(out);
if (ipipe && opipe) {
if (off_in || off_out)
return -ESPIPE;
if (!(in->f_mode & FMODE_READ))
return -EBADF;
if (!(out->f_mode & FMODE_WRITE))
return -EBADF;
/* Splicing to self would be fun, but... */
if (ipipe == opipe)
return -EINVAL;
fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes The current implementation of splice() and tee() ignores O_NONBLOCK set on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag for blocking on pipe arguments. This is inconsistent since splice()-ing from/to non-pipe file descriptors does take O_NONBLOCK into consideration. Fix this by promoting O_NONBLOCK, when set on a pipe, to SPLICE_F_NONBLOCK. Some context for how the current implementation of splice() leads to inconsistent behavior. In the ongoing work[1] to add VM tracing capability to trace-cmd we stream tracing data over named FIFOs or vsockets from guests back to the host. When we receive SIGINT from user to stop tracing, we set O_NONBLOCK on the input file descriptor and set SPLICE_F_NONBLOCK for the next call to splice(). If splice() was blocked waiting on data from the input FIFO, after SIGINT splice() restarts with the same arguments (no SPLICE_F_NONBLOCK) and blocks again instead of returning -EAGAIN when no data is available. This differs from the splice() behavior when reading from a vsocket or when we're doing a traditional read()/write() loop (trace-cmd's --nosplice argument). With this patch applied we get the same behavior in all situations after setting O_NONBLOCK which also matches the behavior of doing a read()/write() loop instead of splice(). This change does have potential of breaking users who don't expect EAGAIN from splice() when SPLICE_F_NONBLOCK is not set. OTOH programs that set O_NONBLOCK and don't anticipate EAGAIN are arguably buggy[2]. [1] https://github.com/skaslev/trace-cmd/tree/vsock [2] https://github.com/torvalds/linux/blob/d47e3da1759230e394096fd742aad423c291ba48/fs/read_write.c#L1425 Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-07 15:45:19 +00:00
if ((in->f_flags | out->f_flags) & O_NONBLOCK)
flags |= SPLICE_F_NONBLOCK;
return splice_pipe_to_pipe(ipipe, opipe, len, flags);
}
if (ipipe) {
if (off_in)
return -ESPIPE;
if (off_out) {
if (!(out->f_mode & FMODE_PWRITE))
return -EINVAL;
if (copy_from_user(&offset, off_out, sizeof(loff_t)))
return -EFAULT;
} else {
offset = out->f_pos;
}
if (unlikely(!(out->f_mode & FMODE_WRITE)))
return -EBADF;
if (unlikely(out->f_flags & O_APPEND))
return -EINVAL;
ret = rw_verify_area(WRITE, out, &offset, len);
if (unlikely(ret < 0))
return ret;
fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes The current implementation of splice() and tee() ignores O_NONBLOCK set on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag for blocking on pipe arguments. This is inconsistent since splice()-ing from/to non-pipe file descriptors does take O_NONBLOCK into consideration. Fix this by promoting O_NONBLOCK, when set on a pipe, to SPLICE_F_NONBLOCK. Some context for how the current implementation of splice() leads to inconsistent behavior. In the ongoing work[1] to add VM tracing capability to trace-cmd we stream tracing data over named FIFOs or vsockets from guests back to the host. When we receive SIGINT from user to stop tracing, we set O_NONBLOCK on the input file descriptor and set SPLICE_F_NONBLOCK for the next call to splice(). If splice() was blocked waiting on data from the input FIFO, after SIGINT splice() restarts with the same arguments (no SPLICE_F_NONBLOCK) and blocks again instead of returning -EAGAIN when no data is available. This differs from the splice() behavior when reading from a vsocket or when we're doing a traditional read()/write() loop (trace-cmd's --nosplice argument). With this patch applied we get the same behavior in all situations after setting O_NONBLOCK which also matches the behavior of doing a read()/write() loop instead of splice(). This change does have potential of breaking users who don't expect EAGAIN from splice() when SPLICE_F_NONBLOCK is not set. OTOH programs that set O_NONBLOCK and don't anticipate EAGAIN are arguably buggy[2]. [1] https://github.com/skaslev/trace-cmd/tree/vsock [2] https://github.com/torvalds/linux/blob/d47e3da1759230e394096fd742aad423c291ba48/fs/read_write.c#L1425 Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-07 15:45:19 +00:00
if (in->f_flags & O_NONBLOCK)
flags |= SPLICE_F_NONBLOCK;
file_start_write(out);
ret = do_splice_from(ipipe, out, &offset, len, flags);
file_end_write(out);
if (!off_out)
out->f_pos = offset;
else if (copy_to_user(off_out, &offset, sizeof(loff_t)))
ret = -EFAULT;
return ret;
}
if (opipe) {
if (off_out)
return -ESPIPE;
if (off_in) {
if (!(in->f_mode & FMODE_PREAD))
return -EINVAL;
if (copy_from_user(&offset, off_in, sizeof(loff_t)))
return -EFAULT;
} else {
offset = in->f_pos;
}
fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes The current implementation of splice() and tee() ignores O_NONBLOCK set on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag for blocking on pipe arguments. This is inconsistent since splice()-ing from/to non-pipe file descriptors does take O_NONBLOCK into consideration. Fix this by promoting O_NONBLOCK, when set on a pipe, to SPLICE_F_NONBLOCK. Some context for how the current implementation of splice() leads to inconsistent behavior. In the ongoing work[1] to add VM tracing capability to trace-cmd we stream tracing data over named FIFOs or vsockets from guests back to the host. When we receive SIGINT from user to stop tracing, we set O_NONBLOCK on the input file descriptor and set SPLICE_F_NONBLOCK for the next call to splice(). If splice() was blocked waiting on data from the input FIFO, after SIGINT splice() restarts with the same arguments (no SPLICE_F_NONBLOCK) and blocks again instead of returning -EAGAIN when no data is available. This differs from the splice() behavior when reading from a vsocket or when we're doing a traditional read()/write() loop (trace-cmd's --nosplice argument). With this patch applied we get the same behavior in all situations after setting O_NONBLOCK which also matches the behavior of doing a read()/write() loop instead of splice(). This change does have potential of breaking users who don't expect EAGAIN from splice() when SPLICE_F_NONBLOCK is not set. OTOH programs that set O_NONBLOCK and don't anticipate EAGAIN are arguably buggy[2]. [1] https://github.com/skaslev/trace-cmd/tree/vsock [2] https://github.com/torvalds/linux/blob/d47e3da1759230e394096fd742aad423c291ba48/fs/read_write.c#L1425 Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-07 15:45:19 +00:00
if (out->f_flags & O_NONBLOCK)
flags |= SPLICE_F_NONBLOCK;
pipe_lock(opipe);
ret = wait_for_space(opipe, flags);
if (!ret)
ret = do_splice_to(in, &offset, opipe, len, flags);
pipe_unlock(opipe);
if (ret > 0)
wakeup_pipe_readers(opipe);
if (!off_in)
in->f_pos = offset;
else if (copy_to_user(off_in, &offset, sizeof(loff_t)))
ret = -EFAULT;
return ret;
}
return -EINVAL;
}
static int iter_to_pipe(struct iov_iter *from,
struct pipe_inode_info *pipe,
unsigned flags)
{
struct pipe_buffer buf = {
.ops = &user_page_pipe_buf_ops,
.flags = flags
};
size_t total = 0;
int ret = 0;
bool failed = false;
while (iov_iter_count(from) && !failed) {
struct page *pages[16];
ssize_t copied;
size_t start;
int n;
copied = iov_iter_get_pages(from, pages, ~0UL, 16, &start);
if (copied <= 0) {
ret = copied;
break;
}
for (n = 0; copied; n++, start = 0) {
int size = min_t(int, copied, PAGE_SIZE - start);
if (!failed) {
buf.page = pages[n];
buf.offset = start;
buf.len = size;
ret = add_to_pipe(pipe, &buf);
if (unlikely(ret < 0)) {
failed = true;
} else {
iov_iter_advance(from, ret);
total += ret;
}
} else {
put_page(pages[n]);
}
copied -= size;
}
}
return total ? total : ret;
}
static int pipe_to_user(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
struct splice_desc *sd)
{
int n = copy_page_to_iter(buf->page, buf->offset, sd->len, sd->u.data);
return n == sd->len ? n : -EFAULT;
}
/*
* For lack of a better implementation, implement vmsplice() to userspace
* as a simple copy of the pipes pages to the user iov.
*/
static long vmsplice_to_user(struct file *file, struct iov_iter *iter,
unsigned int flags)
{
struct pipe_inode_info *pipe = get_pipe_info(file);
struct splice_desc sd = {
.total_len = iov_iter_count(iter),
.flags = flags,
.u.data = iter
};
long ret = 0;
if (!pipe)
return -EBADF;
if (sd.total_len) {
pipe_lock(pipe);
ret = __splice_from_pipe(pipe, &sd, pipe_to_user);
pipe_unlock(pipe);
}
return ret;
}
/*
* vmsplice splices a user address range into a pipe. It can be thought of
* as splice-from-memory, where the regular splice is splice-from-file (or
* to file). In both cases the output is a pipe, naturally.
*/
static long vmsplice_to_pipe(struct file *file, struct iov_iter *iter,
unsigned int flags)
{
struct pipe_inode_info *pipe;
long ret = 0;
unsigned buf_flag = 0;
if (flags & SPLICE_F_GIFT)
buf_flag = PIPE_BUF_FLAG_GIFT;
pipe = get_pipe_info(file);
if (!pipe)
return -EBADF;
pipe_lock(pipe);
ret = wait_for_space(pipe, flags);
if (!ret)
ret = iter_to_pipe(iter, pipe, buf_flag);
pipe_unlock(pipe);
if (ret > 0)
wakeup_pipe_readers(pipe);
return ret;
}
static int vmsplice_type(struct fd f, int *type)
{
if (!f.file)
return -EBADF;
if (f.file->f_mode & FMODE_WRITE) {
*type = WRITE;
} else if (f.file->f_mode & FMODE_READ) {
*type = READ;
} else {
fdput(f);
return -EBADF;
}
return 0;
}
/*
* Note that vmsplice only really supports true splicing _from_ user memory
* to a pipe, not the other way around. Splicing from user memory is a simple
* operation that can be supported without any funky alignment restrictions
* or nasty vm tricks. We simply map in the user memory and fill them into
* a pipe. The reverse isn't quite as easy, though. There are two possible
* solutions for that:
*
* - memcpy() the data internally, at which point we might as well just
* do a regular read() on the buffer anyway.
* - Lots of nasty vm tricks, that are neither fast nor flexible (it
* has restriction limitations on both ends of the pipe).
*
* Currently we punt and implement it as a normal copy, see pipe_to_user().
*
*/
static long do_vmsplice(struct file *f, struct iov_iter *iter, unsigned int flags)
{
if (unlikely(flags & ~SPLICE_F_ALL))
return -EINVAL;
if (!iov_iter_count(iter))
return 0;
if (iov_iter_rw(iter) == WRITE)
return vmsplice_to_pipe(f, iter, flags);
else
return vmsplice_to_user(f, iter, flags);
}
SYSCALL_DEFINE4(vmsplice, int, fd, const struct iovec __user *, uiov,
unsigned long, nr_segs, unsigned int, flags)
{
struct iovec iovstack[UIO_FASTIOV];
struct iovec *iov = iovstack;
struct iov_iter iter;
ssize_t error;
struct fd f;
int type;
f = fdget(fd);
error = vmsplice_type(f, &type);
if (error)
return error;
error = import_iovec(type, uiov, nr_segs,
ARRAY_SIZE(iovstack), &iov, &iter);
if (error >= 0) {
error = do_vmsplice(f.file, &iter, flags);
kfree(iov);
}
fdput(f);
return error;
}
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE4(vmsplice, int, fd, const struct compat_iovec __user *, iov32,
unsigned int, nr_segs, unsigned int, flags)
{
struct iovec iovstack[UIO_FASTIOV];
struct iovec *iov = iovstack;
struct iov_iter iter;
ssize_t error;
struct fd f;
int type;
f = fdget(fd);
error = vmsplice_type(f, &type);
if (error)
return error;
error = compat_import_iovec(type, iov32, nr_segs,
ARRAY_SIZE(iovstack), &iov, &iter);
if (error >= 0) {
error = do_vmsplice(f.file, &iter, flags);
kfree(iov);
}
fdput(f);
return error;
}
#endif
SYSCALL_DEFINE6(splice, int, fd_in, loff_t __user *, off_in,
int, fd_out, loff_t __user *, off_out,
size_t, len, unsigned int, flags)
{
struct fd in, out;
long error;
if (unlikely(!len))
return 0;
if (unlikely(flags & ~SPLICE_F_ALL))
return -EINVAL;
error = -EBADF;
in = fdget(fd_in);
if (in.file) {
if (in.file->f_mode & FMODE_READ) {
out = fdget(fd_out);
if (out.file) {
if (out.file->f_mode & FMODE_WRITE)
error = do_splice(in.file, off_in,
out.file, off_out,
len, flags);
fdput(out);
}
}
fdput(in);
}
return error;
}
/*
* Make sure there's data to read. Wait for input if we can, otherwise
* return an appropriate error.
*/
static int ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
{
int ret;
/*
* Check ->nrbufs without the inode lock first. This function
* is speculative anyways, so missing one is ok.
*/
if (pipe->nrbufs)
return 0;
ret = 0;
pipe_lock(pipe);
while (!pipe->nrbufs) {
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
if (!pipe->writers)
break;
if (!pipe->waiting_writers) {
if (flags & SPLICE_F_NONBLOCK) {
ret = -EAGAIN;
break;
}
}
pipe_wait(pipe);
}
pipe_unlock(pipe);
return ret;
}
/*
* Make sure there's writeable room. Wait for room if we can, otherwise
* return an appropriate error.
*/
static int opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
{
int ret;
/*
* Check ->nrbufs without the inode lock first. This function
* is speculative anyways, so missing one is ok.
*/
if (pipe->nrbufs < pipe->buffers)
return 0;
ret = 0;
pipe_lock(pipe);
while (pipe->nrbufs >= pipe->buffers) {
if (!pipe->readers) {
send_sig(SIGPIPE, current, 0);
ret = -EPIPE;
break;
}
if (flags & SPLICE_F_NONBLOCK) {
ret = -EAGAIN;
break;
}
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
pipe->waiting_writers++;
pipe_wait(pipe);
pipe->waiting_writers--;
}
pipe_unlock(pipe);
return ret;
}
/*
* Splice contents of ipipe to opipe.
*/
static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
struct pipe_inode_info *opipe,
size_t len, unsigned int flags)
{
struct pipe_buffer *ibuf, *obuf;
int ret = 0, nbuf;
bool input_wakeup = false;
retry:
ret = ipipe_prep(ipipe, flags);
if (ret)
return ret;
ret = opipe_prep(opipe, flags);
if (ret)
return ret;
/*
* Potential ABBA deadlock, work around it by ordering lock
* grabbing by pipe info address. Otherwise two different processes
* could deadlock (one doing tee from A -> B, the other from B -> A).
*/
pipe_double_lock(ipipe, opipe);
do {
if (!opipe->readers) {
send_sig(SIGPIPE, current, 0);
if (!ret)
ret = -EPIPE;
break;
}
if (!ipipe->nrbufs && !ipipe->writers)
break;
/*
* Cannot make any progress, because either the input
* pipe is empty or the output pipe is full.
*/
if (!ipipe->nrbufs || opipe->nrbufs >= opipe->buffers) {
/* Already processed some buffers, break */
if (ret)
break;
if (flags & SPLICE_F_NONBLOCK) {
ret = -EAGAIN;
break;
}
/*
* We raced with another reader/writer and haven't
* managed to process any buffers. A zero return
* value means EOF, so retry instead.
*/
pipe_unlock(ipipe);
pipe_unlock(opipe);
goto retry;
}
ibuf = ipipe->bufs + ipipe->curbuf;
nbuf = (opipe->curbuf + opipe->nrbufs) & (opipe->buffers - 1);
obuf = opipe->bufs + nbuf;
if (len >= ibuf->len) {
/*
* Simply move the whole buffer from ipipe to opipe
*/
*obuf = *ibuf;
ibuf->ops = NULL;
opipe->nrbufs++;
ipipe->curbuf = (ipipe->curbuf + 1) & (ipipe->buffers - 1);
ipipe->nrbufs--;
input_wakeup = true;
} else {
/*
* Get a reference to this pipe buffer,
* so we can copy the contents over.
*/
if (!pipe_buf_get(ipipe, ibuf)) {
if (ret == 0)
ret = -EFAULT;
break;
}
*obuf = *ibuf;
/*
* Don't inherit the gift flag, we need to
* prevent multiple steals of this page.
*/
obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
pipe_buf_mark_unmergeable(obuf);
obuf->len = len;
opipe->nrbufs++;
ibuf->offset += obuf->len;
ibuf->len -= obuf->len;
}
ret += obuf->len;
len -= obuf->len;
} while (len);
pipe_unlock(ipipe);
pipe_unlock(opipe);
/*
* If we put data in the output pipe, wakeup any potential readers.
*/
if (ret > 0)
wakeup_pipe_readers(opipe);
if (input_wakeup)
wakeup_pipe_writers(ipipe);
return ret;
}
/*
* Link contents of ipipe to opipe.
*/
static int link_pipe(struct pipe_inode_info *ipipe,
struct pipe_inode_info *opipe,
size_t len, unsigned int flags)
{
struct pipe_buffer *ibuf, *obuf;
int ret = 0, i = 0, nbuf;
/*
* Potential ABBA deadlock, work around it by ordering lock
* grabbing by pipe info address. Otherwise two different processes
* could deadlock (one doing tee from A -> B, the other from B -> A).
*/
pipe_double_lock(ipipe, opipe);
do {
if (!opipe->readers) {
send_sig(SIGPIPE, current, 0);
if (!ret)
ret = -EPIPE;
break;
}
/*
* If we have iterated all input buffers or ran out of
* output room, break.
*/
if (i >= ipipe->nrbufs || opipe->nrbufs >= opipe->buffers)
break;
ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (ipipe->buffers-1));
nbuf = (opipe->curbuf + opipe->nrbufs) & (opipe->buffers - 1);
/*
* Get a reference to this pipe buffer,
* so we can copy the contents over.
*/
if (!pipe_buf_get(ipipe, ibuf)) {
if (ret == 0)
ret = -EFAULT;
break;
}
obuf = opipe->bufs + nbuf;
*obuf = *ibuf;
/*
* Don't inherit the gift flag, we need to
* prevent multiple steals of this page.
*/
obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
pipe_buf_mark_unmergeable(obuf);
if (obuf->len > len)
obuf->len = len;
opipe->nrbufs++;
ret += obuf->len;
len -= obuf->len;
i++;
} while (len);
/*
* return EAGAIN if we have the potential of some data in the
* future, otherwise just return 0
*/
if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK))
ret = -EAGAIN;
pipe_unlock(ipipe);
pipe_unlock(opipe);
/*
* If we put data in the output pipe, wakeup any potential readers.
*/
if (ret > 0)
wakeup_pipe_readers(opipe);
return ret;
}
/*
* This is a tee(1) implementation that works on pipes. It doesn't copy
* any data, it simply references the 'in' pages on the 'out' pipe.
* The 'flags' used are the SPLICE_F_* variants, currently the only
* applicable one is SPLICE_F_NONBLOCK.
*/
static long do_tee(struct file *in, struct file *out, size_t len,
unsigned int flags)
{
struct pipe_inode_info *ipipe = get_pipe_info(in);
struct pipe_inode_info *opipe = get_pipe_info(out);
int ret = -EINVAL;
/*
* Duplicate the contents of ipipe to opipe without actually
* copying the data.
*/
if (ipipe && opipe && ipipe != opipe) {
fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes The current implementation of splice() and tee() ignores O_NONBLOCK set on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag for blocking on pipe arguments. This is inconsistent since splice()-ing from/to non-pipe file descriptors does take O_NONBLOCK into consideration. Fix this by promoting O_NONBLOCK, when set on a pipe, to SPLICE_F_NONBLOCK. Some context for how the current implementation of splice() leads to inconsistent behavior. In the ongoing work[1] to add VM tracing capability to trace-cmd we stream tracing data over named FIFOs or vsockets from guests back to the host. When we receive SIGINT from user to stop tracing, we set O_NONBLOCK on the input file descriptor and set SPLICE_F_NONBLOCK for the next call to splice(). If splice() was blocked waiting on data from the input FIFO, after SIGINT splice() restarts with the same arguments (no SPLICE_F_NONBLOCK) and blocks again instead of returning -EAGAIN when no data is available. This differs from the splice() behavior when reading from a vsocket or when we're doing a traditional read()/write() loop (trace-cmd's --nosplice argument). With this patch applied we get the same behavior in all situations after setting O_NONBLOCK which also matches the behavior of doing a read()/write() loop instead of splice(). This change does have potential of breaking users who don't expect EAGAIN from splice() when SPLICE_F_NONBLOCK is not set. OTOH programs that set O_NONBLOCK and don't anticipate EAGAIN are arguably buggy[2]. [1] https://github.com/skaslev/trace-cmd/tree/vsock [2] https://github.com/torvalds/linux/blob/d47e3da1759230e394096fd742aad423c291ba48/fs/read_write.c#L1425 Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-07 15:45:19 +00:00
if ((in->f_flags | out->f_flags) & O_NONBLOCK)
flags |= SPLICE_F_NONBLOCK;
/*
* Keep going, unless we encounter an error. The ipipe/opipe
* ordering doesn't really matter.
*/
ret = ipipe_prep(ipipe, flags);
if (!ret) {
ret = opipe_prep(opipe, flags);
if (!ret)
ret = link_pipe(ipipe, opipe, len, flags);
}
}
return ret;
}
SYSCALL_DEFINE4(tee, int, fdin, int, fdout, size_t, len, unsigned int, flags)
{
struct fd in;
int error;
if (unlikely(flags & ~SPLICE_F_ALL))
return -EINVAL;
if (unlikely(!len))
return 0;
error = -EBADF;
in = fdget(fdin);
if (in.file) {
if (in.file->f_mode & FMODE_READ) {
struct fd out = fdget(fdout);
if (out.file) {
if (out.file->f_mode & FMODE_WRITE)
error = do_tee(in.file, out.file,
len, flags);
fdput(out);
}
}
fdput(in);
}
return error;
}