pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Implements pstore backend driver that write to block (or non-block) storage
|
|
|
|
* devices, using the pstore/zone API.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include "../../block/blk.h"
|
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_address.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/pstore_blk.h>
|
|
|
|
#include <linux/mount.h>
|
|
|
|
#include <linux/uio.h>
|
|
|
|
|
|
|
|
static long kmsg_size = CONFIG_PSTORE_BLK_KMSG_SIZE;
|
|
|
|
module_param(kmsg_size, long, 0400);
|
|
|
|
MODULE_PARM_DESC(kmsg_size, "kmsg dump record size in kbytes");
|
|
|
|
|
|
|
|
static int max_reason = CONFIG_PSTORE_BLK_MAX_REASON;
|
|
|
|
module_param(max_reason, int, 0400);
|
|
|
|
MODULE_PARM_DESC(max_reason,
|
|
|
|
"maximum reason for kmsg dump (default 2: Oops and Panic)");
|
|
|
|
|
2020-03-25 08:54:59 +00:00
|
|
|
#if IS_ENABLED(CONFIG_PSTORE_PMSG)
|
|
|
|
static long pmsg_size = CONFIG_PSTORE_BLK_PMSG_SIZE;
|
|
|
|
#else
|
|
|
|
static long pmsg_size = -1;
|
|
|
|
#endif
|
|
|
|
module_param(pmsg_size, long, 0400);
|
|
|
|
MODULE_PARM_DESC(pmsg_size, "pmsg size in kbytes");
|
|
|
|
|
2020-03-25 08:55:00 +00:00
|
|
|
#if IS_ENABLED(CONFIG_PSTORE_CONSOLE)
|
|
|
|
static long console_size = CONFIG_PSTORE_BLK_CONSOLE_SIZE;
|
|
|
|
#else
|
|
|
|
static long console_size = -1;
|
|
|
|
#endif
|
|
|
|
module_param(console_size, long, 0400);
|
|
|
|
MODULE_PARM_DESC(console_size, "console size in kbytes");
|
|
|
|
|
2020-03-25 08:55:01 +00:00
|
|
|
#if IS_ENABLED(CONFIG_PSTORE_FTRACE)
|
|
|
|
static long ftrace_size = CONFIG_PSTORE_BLK_FTRACE_SIZE;
|
|
|
|
#else
|
|
|
|
static long ftrace_size = -1;
|
|
|
|
#endif
|
|
|
|
module_param(ftrace_size, long, 0400);
|
|
|
|
MODULE_PARM_DESC(ftrace_size, "ftrace size in kbytes");
|
|
|
|
|
2020-05-08 15:34:01 +00:00
|
|
|
static bool best_effort;
|
|
|
|
module_param(best_effort, bool, 0400);
|
|
|
|
MODULE_PARM_DESC(best_effort, "use best effort to write (i.e. do not require storage driver pstore support, default: off)");
|
|
|
|
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
/*
|
|
|
|
* blkdev - the block device to use for pstore storage
|
|
|
|
*
|
|
|
|
* Usually, this will be a partition of a block device.
|
|
|
|
*
|
|
|
|
* blkdev accepts the following variants:
|
|
|
|
* 1) <hex_major><hex_minor> device number in hexadecimal representation,
|
|
|
|
* with no leading 0x, for example b302.
|
|
|
|
* 2) /dev/<disk_name> represents the device number of disk
|
|
|
|
* 3) /dev/<disk_name><decimal> represents the device number
|
|
|
|
* of partition - device number of disk plus the partition number
|
|
|
|
* 4) /dev/<disk_name>p<decimal> - same as the above, that form is
|
|
|
|
* used when disk name of partitioned disk ends on a digit.
|
|
|
|
* 5) PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF representing the
|
|
|
|
* unique id of a partition if the partition table provides it.
|
|
|
|
* The UUID may be either an EFI/GPT UUID, or refer to an MSDOS
|
|
|
|
* partition using the format SSSSSSSS-PP, where SSSSSSSS is a zero-
|
|
|
|
* filled hex representation of the 32-bit "NT disk signature", and PP
|
|
|
|
* is a zero-filled hex representation of the 1-based partition number.
|
|
|
|
* 6) PARTUUID=<UUID>/PARTNROFF=<int> to select a partition in relation to
|
|
|
|
* a partition with a known unique id.
|
|
|
|
* 7) <major>:<minor> major and minor number of the device separated by
|
|
|
|
* a colon.
|
|
|
|
*/
|
|
|
|
static char blkdev[80] = CONFIG_PSTORE_BLK_BLKDEV;
|
|
|
|
module_param_string(blkdev, blkdev, 80, 0400);
|
|
|
|
MODULE_PARM_DESC(blkdev, "block device for pstore storage");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* All globals must only be accessed under the pstore_blk_lock
|
|
|
|
* during the register/unregister functions.
|
|
|
|
*/
|
|
|
|
static DEFINE_MUTEX(pstore_blk_lock);
|
|
|
|
static struct block_device *psblk_bdev;
|
|
|
|
static struct pstore_zone_info *pstore_zone_info;
|
|
|
|
static pstore_blk_panic_write_op blkdev_panic_write;
|
|
|
|
|
|
|
|
struct bdev_info {
|
|
|
|
dev_t devt;
|
|
|
|
sector_t nr_sects;
|
|
|
|
sector_t start_sect;
|
|
|
|
};
|
|
|
|
|
2020-03-25 08:55:04 +00:00
|
|
|
#define check_size(name, alignsize) ({ \
|
|
|
|
long _##name_ = (name); \
|
|
|
|
_##name_ = _##name_ <= 0 ? 0 : (_##name_ * 1024); \
|
|
|
|
if (_##name_ & ((alignsize) - 1)) { \
|
|
|
|
pr_info(#name " must align to %d\n", \
|
|
|
|
(alignsize)); \
|
|
|
|
_##name_ = ALIGN(name, (alignsize)); \
|
|
|
|
} \
|
|
|
|
_##name_; \
|
|
|
|
})
|
|
|
|
|
2020-03-25 08:55:05 +00:00
|
|
|
static int __register_pstore_device(struct pstore_device_info *dev)
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
2020-03-25 08:55:05 +00:00
|
|
|
lockdep_assert_held(&pstore_blk_lock);
|
|
|
|
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
if (!dev || !dev->total_size || !dev->read || !dev->write)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* someone already registered before */
|
2020-03-25 08:55:05 +00:00
|
|
|
if (pstore_zone_info)
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
return -EBUSY;
|
2020-03-25 08:55:05 +00:00
|
|
|
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
pstore_zone_info = kzalloc(sizeof(struct pstore_zone_info), GFP_KERNEL);
|
2020-03-25 08:55:05 +00:00
|
|
|
if (!pstore_zone_info)
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
/* zero means not limit on which backends to attempt to store. */
|
|
|
|
if (!dev->flags)
|
|
|
|
dev->flags = UINT_MAX;
|
|
|
|
|
|
|
|
#define verify_size(name, alignsize, enabled) { \
|
2020-03-25 08:55:04 +00:00
|
|
|
long _##name_; \
|
|
|
|
if (enabled) \
|
|
|
|
_##name_ = check_size(name, alignsize); \
|
|
|
|
else \
|
|
|
|
_##name_ = 0; \
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
name = _##name_ / 1024; \
|
|
|
|
pstore_zone_info->name = _##name_; \
|
|
|
|
}
|
|
|
|
|
|
|
|
verify_size(kmsg_size, 4096, dev->flags & PSTORE_FLAGS_DMESG);
|
2020-03-25 08:54:59 +00:00
|
|
|
verify_size(pmsg_size, 4096, dev->flags & PSTORE_FLAGS_PMSG);
|
2020-03-25 08:55:00 +00:00
|
|
|
verify_size(console_size, 4096, dev->flags & PSTORE_FLAGS_CONSOLE);
|
2020-03-25 08:55:01 +00:00
|
|
|
verify_size(ftrace_size, 4096, dev->flags & PSTORE_FLAGS_FTRACE);
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
#undef verify_size
|
|
|
|
|
|
|
|
pstore_zone_info->total_size = dev->total_size;
|
|
|
|
pstore_zone_info->max_reason = max_reason;
|
|
|
|
pstore_zone_info->read = dev->read;
|
|
|
|
pstore_zone_info->write = dev->write;
|
2020-03-25 08:55:05 +00:00
|
|
|
pstore_zone_info->erase = dev->erase;
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
pstore_zone_info->panic_write = dev->panic_write;
|
|
|
|
pstore_zone_info->name = KBUILD_MODNAME;
|
|
|
|
pstore_zone_info->owner = THIS_MODULE;
|
|
|
|
|
|
|
|
ret = register_pstore_zone(pstore_zone_info);
|
|
|
|
if (ret) {
|
|
|
|
kfree(pstore_zone_info);
|
|
|
|
pstore_zone_info = NULL;
|
|
|
|
}
|
2020-03-25 08:55:05 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
/**
|
|
|
|
* register_pstore_device() - register non-block device to pstore/blk
|
|
|
|
*
|
|
|
|
* @dev: non-block device information
|
|
|
|
*
|
|
|
|
* Return:
|
|
|
|
* * 0 - OK
|
|
|
|
* * Others - something error.
|
|
|
|
*/
|
|
|
|
int register_pstore_device(struct pstore_device_info *dev)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
mutex_lock(&pstore_blk_lock);
|
|
|
|
ret = __register_pstore_device(dev);
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
mutex_unlock(&pstore_blk_lock);
|
2020-03-25 08:55:05 +00:00
|
|
|
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
return ret;
|
|
|
|
}
|
2020-03-25 08:55:05 +00:00
|
|
|
EXPORT_SYMBOL_GPL(register_pstore_device);
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
|
2020-03-25 08:55:05 +00:00
|
|
|
static void __unregister_pstore_device(struct pstore_device_info *dev)
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
{
|
2020-03-25 08:55:05 +00:00
|
|
|
lockdep_assert_held(&pstore_blk_lock);
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
if (pstore_zone_info && pstore_zone_info->read == dev->read) {
|
|
|
|
unregister_pstore_zone(pstore_zone_info);
|
|
|
|
kfree(pstore_zone_info);
|
|
|
|
pstore_zone_info = NULL;
|
|
|
|
}
|
2020-03-25 08:55:05 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* unregister_pstore_device() - unregister non-block device from pstore/blk
|
|
|
|
*
|
|
|
|
* @dev: non-block device information
|
|
|
|
*/
|
|
|
|
void unregister_pstore_device(struct pstore_device_info *dev)
|
|
|
|
{
|
|
|
|
mutex_lock(&pstore_blk_lock);
|
|
|
|
__unregister_pstore_device(dev);
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
mutex_unlock(&pstore_blk_lock);
|
|
|
|
}
|
2020-03-25 08:55:05 +00:00
|
|
|
EXPORT_SYMBOL_GPL(unregister_pstore_device);
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
|
|
|
|
/**
|
|
|
|
* psblk_get_bdev() - open block device
|
|
|
|
*
|
|
|
|
* @holder: Exclusive holder identifier
|
|
|
|
* @info: Information about bdev to fill in
|
|
|
|
*
|
|
|
|
* Return: pointer to block device on success and others on error.
|
|
|
|
*
|
|
|
|
* On success, the returned block_device has reference count of one.
|
|
|
|
*/
|
|
|
|
static struct block_device *psblk_get_bdev(void *holder,
|
|
|
|
struct bdev_info *info)
|
|
|
|
{
|
|
|
|
struct block_device *bdev = ERR_PTR(-ENODEV);
|
|
|
|
fmode_t mode = FMODE_READ | FMODE_WRITE;
|
|
|
|
sector_t nr_sects;
|
|
|
|
|
|
|
|
lockdep_assert_held(&pstore_blk_lock);
|
|
|
|
|
|
|
|
if (pstore_zone_info)
|
|
|
|
return ERR_PTR(-EBUSY);
|
|
|
|
|
|
|
|
if (!blkdev[0])
|
|
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
|
|
|
|
if (holder)
|
|
|
|
mode |= FMODE_EXCL;
|
|
|
|
bdev = blkdev_get_by_path(blkdev, mode, holder);
|
|
|
|
if (IS_ERR(bdev)) {
|
|
|
|
dev_t devt;
|
|
|
|
|
|
|
|
devt = name_to_dev_t(blkdev);
|
|
|
|
if (devt == 0)
|
|
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
bdev = blkdev_get_by_dev(devt, mode, holder);
|
|
|
|
if (IS_ERR(bdev))
|
|
|
|
return bdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
nr_sects = part_nr_sects_read(bdev->bd_part);
|
|
|
|
if (!nr_sects) {
|
|
|
|
pr_err("not enough space for '%s'\n", blkdev);
|
|
|
|
blkdev_put(bdev, mode);
|
|
|
|
return ERR_PTR(-ENOSPC);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (info) {
|
|
|
|
info->devt = bdev->bd_dev;
|
|
|
|
info->nr_sects = nr_sects;
|
|
|
|
info->start_sect = get_start_sect(bdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
return bdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void psblk_put_bdev(struct block_device *bdev, void *holder)
|
|
|
|
{
|
|
|
|
fmode_t mode = FMODE_READ | FMODE_WRITE;
|
|
|
|
|
|
|
|
lockdep_assert_held(&pstore_blk_lock);
|
|
|
|
|
|
|
|
if (!bdev)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (holder)
|
|
|
|
mode |= FMODE_EXCL;
|
|
|
|
blkdev_put(bdev, mode);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t psblk_generic_blk_read(char *buf, size_t bytes, loff_t pos)
|
|
|
|
{
|
|
|
|
struct block_device *bdev = psblk_bdev;
|
|
|
|
struct file file;
|
|
|
|
struct kiocb kiocb;
|
|
|
|
struct iov_iter iter;
|
|
|
|
struct kvec iov = {.iov_base = buf, .iov_len = bytes};
|
|
|
|
|
|
|
|
if (!bdev)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
memset(&file, 0, sizeof(struct file));
|
|
|
|
file.f_mapping = bdev->bd_inode->i_mapping;
|
|
|
|
file.f_flags = O_DSYNC | __O_SYNC | O_NOATIME;
|
|
|
|
file.f_inode = bdev->bd_inode;
|
|
|
|
file_ra_state_init(&file.f_ra, file.f_mapping);
|
|
|
|
|
|
|
|
init_sync_kiocb(&kiocb, &file);
|
|
|
|
kiocb.ki_pos = pos;
|
|
|
|
iov_iter_kvec(&iter, READ, &iov, 1, bytes);
|
|
|
|
|
|
|
|
return generic_file_read_iter(&kiocb, &iter);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t psblk_generic_blk_write(const char *buf, size_t bytes,
|
|
|
|
loff_t pos)
|
|
|
|
{
|
|
|
|
struct block_device *bdev = psblk_bdev;
|
|
|
|
struct iov_iter iter;
|
|
|
|
struct kiocb kiocb;
|
|
|
|
struct file file;
|
|
|
|
ssize_t ret;
|
|
|
|
struct kvec iov = {.iov_base = (void *)buf, .iov_len = bytes};
|
|
|
|
|
|
|
|
if (!bdev)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
/* Console/Ftrace backend may handle buffer until flush dirty zones */
|
|
|
|
if (in_interrupt() || irqs_disabled())
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
memset(&file, 0, sizeof(struct file));
|
|
|
|
file.f_mapping = bdev->bd_inode->i_mapping;
|
|
|
|
file.f_flags = O_DSYNC | __O_SYNC | O_NOATIME;
|
|
|
|
file.f_inode = bdev->bd_inode;
|
|
|
|
|
|
|
|
init_sync_kiocb(&kiocb, &file);
|
|
|
|
kiocb.ki_pos = pos;
|
|
|
|
iov_iter_kvec(&iter, WRITE, &iov, 1, bytes);
|
|
|
|
|
|
|
|
inode_lock(bdev->bd_inode);
|
|
|
|
ret = generic_write_checks(&kiocb, &iter);
|
|
|
|
if (ret > 0)
|
|
|
|
ret = generic_perform_write(&file, &iter, pos);
|
|
|
|
inode_unlock(bdev->bd_inode);
|
|
|
|
|
|
|
|
if (likely(ret > 0)) {
|
|
|
|
const struct file_operations f_op = {.fsync = blkdev_fsync};
|
|
|
|
|
|
|
|
file.f_op = &f_op;
|
|
|
|
kiocb.ki_pos += ret;
|
|
|
|
ret = generic_write_sync(&kiocb, ret);
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t psblk_blk_panic_write(const char *buf, size_t size,
|
|
|
|
loff_t off)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!blkdev_panic_write)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
/* size and off must align to SECTOR_SIZE for block device */
|
|
|
|
ret = blkdev_panic_write(buf, off >> SECTOR_SHIFT,
|
|
|
|
size >> SECTOR_SHIFT);
|
2020-03-25 08:55:03 +00:00
|
|
|
/* try next zone */
|
|
|
|
if (ret == -ENOMSG)
|
|
|
|
return ret;
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
return ret ? -EIO : size;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __register_pstore_blk(struct pstore_blk_info *info)
|
|
|
|
{
|
|
|
|
char bdev_name[BDEVNAME_SIZE];
|
|
|
|
struct block_device *bdev;
|
|
|
|
struct pstore_device_info dev;
|
|
|
|
struct bdev_info binfo;
|
|
|
|
void *holder = blkdev;
|
|
|
|
int ret = -ENODEV;
|
|
|
|
|
|
|
|
lockdep_assert_held(&pstore_blk_lock);
|
|
|
|
|
|
|
|
/* hold bdev exclusively */
|
|
|
|
memset(&binfo, 0, sizeof(binfo));
|
|
|
|
bdev = psblk_get_bdev(holder, &binfo);
|
|
|
|
if (IS_ERR(bdev)) {
|
|
|
|
pr_err("failed to open '%s'!\n", blkdev);
|
|
|
|
return PTR_ERR(bdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* only allow driver matching the @blkdev */
|
2020-05-08 15:34:01 +00:00
|
|
|
if (!binfo.devt || (!best_effort &&
|
|
|
|
MAJOR(binfo.devt) != info->major)) {
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
pr_debug("invalid major %u (expect %u)\n",
|
|
|
|
info->major, MAJOR(binfo.devt));
|
|
|
|
ret = -ENODEV;
|
|
|
|
goto err_put_bdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* psblk_bdev must be assigned before register to pstore/blk */
|
|
|
|
psblk_bdev = bdev;
|
|
|
|
blkdev_panic_write = info->panic_write;
|
|
|
|
|
|
|
|
/* Copy back block device details. */
|
|
|
|
info->devt = binfo.devt;
|
|
|
|
info->nr_sects = binfo.nr_sects;
|
|
|
|
info->start_sect = binfo.start_sect;
|
|
|
|
|
|
|
|
memset(&dev, 0, sizeof(dev));
|
|
|
|
dev.total_size = info->nr_sects << SECTOR_SHIFT;
|
|
|
|
dev.flags = info->flags;
|
|
|
|
dev.read = psblk_generic_blk_read;
|
|
|
|
dev.write = psblk_generic_blk_write;
|
2020-03-25 08:55:05 +00:00
|
|
|
dev.erase = NULL;
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
dev.panic_write = info->panic_write ? psblk_blk_panic_write : NULL;
|
|
|
|
|
2020-03-25 08:55:05 +00:00
|
|
|
ret = __register_pstore_device(&dev);
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
if (ret)
|
|
|
|
goto err_put_bdev;
|
|
|
|
|
|
|
|
bdevname(bdev, bdev_name);
|
|
|
|
pr_info("attached %s%s\n", bdev_name,
|
|
|
|
info->panic_write ? "" : " (no dedicated panic_write!)");
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_put_bdev:
|
|
|
|
psblk_bdev = NULL;
|
|
|
|
blkdev_panic_write = NULL;
|
|
|
|
psblk_put_bdev(bdev, holder);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* register_pstore_blk() - register block device to pstore/blk
|
|
|
|
*
|
|
|
|
* @info: details on the desired block device interface
|
|
|
|
*
|
|
|
|
* Return:
|
|
|
|
* * 0 - OK
|
|
|
|
* * Others - something error.
|
|
|
|
*/
|
|
|
|
int register_pstore_blk(struct pstore_blk_info *info)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
mutex_lock(&pstore_blk_lock);
|
|
|
|
ret = __register_pstore_blk(info);
|
|
|
|
mutex_unlock(&pstore_blk_lock);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(register_pstore_blk);
|
|
|
|
|
|
|
|
static void __unregister_pstore_blk(unsigned int major)
|
|
|
|
{
|
|
|
|
struct pstore_device_info dev = { .read = psblk_generic_blk_read };
|
|
|
|
void *holder = blkdev;
|
|
|
|
|
|
|
|
lockdep_assert_held(&pstore_blk_lock);
|
|
|
|
if (psblk_bdev && MAJOR(psblk_bdev->bd_dev) == major) {
|
2020-03-25 08:55:05 +00:00
|
|
|
__unregister_pstore_device(&dev);
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
psblk_put_bdev(psblk_bdev, holder);
|
|
|
|
blkdev_panic_write = NULL;
|
|
|
|
psblk_bdev = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* unregister_pstore_blk() - unregister block device from pstore/blk
|
|
|
|
*
|
|
|
|
* @major: the major device number of device
|
|
|
|
*/
|
|
|
|
void unregister_pstore_blk(unsigned int major)
|
|
|
|
{
|
|
|
|
mutex_lock(&pstore_blk_lock);
|
|
|
|
__unregister_pstore_blk(major);
|
|
|
|
mutex_unlock(&pstore_blk_lock);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(unregister_pstore_blk);
|
|
|
|
|
2020-03-25 08:55:04 +00:00
|
|
|
/* get information of pstore/blk */
|
|
|
|
int pstore_blk_get_config(struct pstore_blk_config *info)
|
|
|
|
{
|
|
|
|
strncpy(info->device, blkdev, 80);
|
|
|
|
info->max_reason = max_reason;
|
|
|
|
info->kmsg_size = check_size(kmsg_size, 4096);
|
|
|
|
info->pmsg_size = check_size(pmsg_size, 4096);
|
|
|
|
info->ftrace_size = check_size(ftrace_size, 4096);
|
|
|
|
info->console_size = check_size(console_size, 4096);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(pstore_blk_get_config);
|
|
|
|
|
2020-05-08 15:34:01 +00:00
|
|
|
static int __init pstore_blk_init(void)
|
|
|
|
{
|
|
|
|
struct pstore_blk_info info = { };
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
mutex_lock(&pstore_blk_lock);
|
|
|
|
if (!pstore_zone_info && best_effort && blkdev[0])
|
|
|
|
ret = __register_pstore_blk(&info);
|
|
|
|
mutex_unlock(&pstore_blk_lock);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
late_initcall(pstore_blk_init);
|
|
|
|
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
static void __exit pstore_blk_exit(void)
|
|
|
|
{
|
|
|
|
mutex_lock(&pstore_blk_lock);
|
|
|
|
if (psblk_bdev)
|
|
|
|
__unregister_pstore_blk(MAJOR(psblk_bdev->bd_dev));
|
2020-03-25 08:55:05 +00:00
|
|
|
else {
|
|
|
|
struct pstore_device_info dev = { };
|
|
|
|
|
|
|
|
if (pstore_zone_info)
|
|
|
|
dev.read = pstore_zone_info->read;
|
|
|
|
__unregister_pstore_device(&dev);
|
|
|
|
}
|
pstore/blk: Introduce backend for block devices
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25 08:54:57 +00:00
|
|
|
mutex_unlock(&pstore_blk_lock);
|
|
|
|
}
|
|
|
|
module_exit(pstore_blk_exit);
|
|
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR("WeiXiong Liao <liaoweixiong@allwinnertech.com>");
|
|
|
|
MODULE_AUTHOR("Kees Cook <keescook@chromium.org>");
|
|
|
|
MODULE_DESCRIPTION("pstore backend for block devices");
|