linux/arch/um/sys-i386/signal.c

329 lines
9.0 KiB
C
Raw Normal View History

/*
* Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
* Licensed under the GPL
*/
#include "linux/signal.h"
#include "linux/ptrace.h"
#include "asm/current.h"
#include "asm/ucontext.h"
#include "asm/uaccess.h"
#include "asm/unistd.h"
#include "frame_kern.h"
#include "sigcontext.h"
#include "registers.h"
#include "skas.h"
void copy_sc(struct uml_pt_regs *regs, void *from)
{
struct sigcontext *sc = from;
REGS_GS(regs->regs) = sc->gs;
REGS_FS(regs->regs) = sc->fs;
REGS_ES(regs->regs) = sc->es;
REGS_DS(regs->regs) = sc->ds;
REGS_EDI(regs->regs) = sc->edi;
REGS_ESI(regs->regs) = sc->esi;
REGS_EBP(regs->regs) = sc->ebp;
REGS_SP(regs->regs) = sc->esp;
REGS_EBX(regs->regs) = sc->ebx;
REGS_EDX(regs->regs) = sc->edx;
REGS_ECX(regs->regs) = sc->ecx;
REGS_EAX(regs->regs) = sc->eax;
REGS_IP(regs->regs) = sc->eip;
REGS_CS(regs->regs) = sc->cs;
REGS_EFLAGS(regs->regs) = sc->eflags;
REGS_SS(regs->regs) = sc->ss;
}
static int copy_sc_from_user(struct pt_regs *regs,
struct sigcontext __user *from)
{
struct sigcontext sc;
unsigned long fpregs[HOST_FP_SIZE];
int err;
err = copy_from_user(&sc, from, sizeof(sc));
err |= copy_from_user(fpregs, sc.fpstate, sizeof(fpregs));
if(err)
return err;
copy_sc(&regs->regs, &sc);
err = restore_fp_registers(userspace_pid[0], fpregs);
if(err < 0) {
printk("copy_sc_from_user_skas - PTRACE_SETFPREGS failed, "
"errno = %d\n", -err);
return err;
}
return 0;
}
static int copy_sc_to_user(struct sigcontext __user *to,
struct _fpstate __user *to_fp, struct pt_regs *regs,
unsigned long sp)
{
struct sigcontext sc;
unsigned long fpregs[HOST_FP_SIZE];
[PATCH] uml: S390 preparation, abstract host page fault data This patch removes the arch-specific fault/trap-infos from thread and skas-regs. It adds a new struct faultinfo, that is arch-specific defined in sysdep/faultinfo.h. The structure is inserted in thread.arch and thread.regs.skas and thread.regs.tt Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo to thread.arch.faultinfo with one simple assignment. Also, the number of macros necessary is reduced to FAULT_ADDRESS(struct faultinfo) extracts the faulting address from faultinfo FAULT_WRITE(struct faultinfo) extracts the "is_write" flag SEGV_IS_FIXABLE(struct faultinfo) is true for the fixable segvs, i.e. (TRAP == 14) on i386 UPT_FAULTINFO(regs) result is (struct faultinfo *) to the faultinfo in regs->skas.faultinfo GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *) copies the relevant parts of the sigcontext to struct faultinfo. On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is missing, because segv-stub will provide the info. The benefit of the change is, that in case of a non-fixable SIGSEGV, we can give user processes a SIGSEGV, instead of possibly looping on pagefault handling. Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(), I changed segv() to call arch_fixup() only, if !is_user. Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 23:15:31 +00:00
struct faultinfo * fi = &current->thread.arch.faultinfo;
int err;
sc.gs = REGS_GS(regs->regs.regs);
sc.fs = REGS_FS(regs->regs.regs);
sc.es = REGS_ES(regs->regs.regs);
sc.ds = REGS_DS(regs->regs.regs);
sc.edi = REGS_EDI(regs->regs.regs);
sc.esi = REGS_ESI(regs->regs.regs);
sc.ebp = REGS_EBP(regs->regs.regs);
sc.esp = sp;
sc.ebx = REGS_EBX(regs->regs.regs);
sc.edx = REGS_EDX(regs->regs.regs);
sc.ecx = REGS_ECX(regs->regs.regs);
sc.eax = REGS_EAX(regs->regs.regs);
sc.eip = REGS_IP(regs->regs.regs);
sc.cs = REGS_CS(regs->regs.regs);
sc.eflags = REGS_EFLAGS(regs->regs.regs);
sc.esp_at_signal = regs->regs.regs[UESP];
sc.ss = regs->regs.regs[SS];
[PATCH] uml: S390 preparation, abstract host page fault data This patch removes the arch-specific fault/trap-infos from thread and skas-regs. It adds a new struct faultinfo, that is arch-specific defined in sysdep/faultinfo.h. The structure is inserted in thread.arch and thread.regs.skas and thread.regs.tt Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo to thread.arch.faultinfo with one simple assignment. Also, the number of macros necessary is reduced to FAULT_ADDRESS(struct faultinfo) extracts the faulting address from faultinfo FAULT_WRITE(struct faultinfo) extracts the "is_write" flag SEGV_IS_FIXABLE(struct faultinfo) is true for the fixable segvs, i.e. (TRAP == 14) on i386 UPT_FAULTINFO(regs) result is (struct faultinfo *) to the faultinfo in regs->skas.faultinfo GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *) copies the relevant parts of the sigcontext to struct faultinfo. On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is missing, because segv-stub will provide the info. The benefit of the change is, that in case of a non-fixable SIGSEGV, we can give user processes a SIGSEGV, instead of possibly looping on pagefault handling. Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(), I changed segv() to call arch_fixup() only, if !is_user. Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 23:15:31 +00:00
sc.cr2 = fi->cr2;
sc.err = fi->error_code;
sc.trapno = fi->trap_no;
err = save_fp_registers(userspace_pid[0], fpregs);
if(err < 0){
printk("copy_sc_to_user_skas - PTRACE_GETFPREGS failed, "
"errno = %d\n", err);
return 1;
}
to_fp = (to_fp ? to_fp : (struct _fpstate __user *) (to + 1));
sc.fpstate = to_fp;
if(err)
return err;
return copy_to_user(to, &sc, sizeof(sc)) ||
copy_to_user(to_fp, fpregs, sizeof(fpregs));
}
static int copy_ucontext_to_user(struct ucontext __user *uc, struct _fpstate __user *fp,
sigset_t *set, unsigned long sp)
{
int err = 0;
err |= put_user(current->sas_ss_sp, &uc->uc_stack.ss_sp);
err |= put_user(sas_ss_flags(sp), &uc->uc_stack.ss_flags);
err |= put_user(current->sas_ss_size, &uc->uc_stack.ss_size);
err |= copy_sc_to_user(&uc->uc_mcontext, fp, &current->thread.regs, sp);
err |= copy_to_user(&uc->uc_sigmask, set, sizeof(*set));
return err;
}
struct sigframe
{
char __user *pretcode;
int sig;
struct sigcontext sc;
struct _fpstate fpstate;
unsigned long extramask[_NSIG_WORDS-1];
char retcode[8];
};
struct rt_sigframe
{
char __user *pretcode;
int sig;
struct siginfo __user *pinfo;
void __user *puc;
struct siginfo info;
struct ucontext uc;
struct _fpstate fpstate;
char retcode[8];
};
int setup_signal_stack_sc(unsigned long stack_top, int sig,
struct k_sigaction *ka, struct pt_regs *regs,
sigset_t *mask)
{
struct sigframe __user *frame;
void __user *restorer;
unsigned long save_sp = PT_REGS_SP(regs);
int err = 0;
/* This is the same calculation as i386 - ((sp + 4) & 15) == 0 */
stack_top = ((stack_top + 4) & -16UL) - 4;
frame = (struct sigframe __user *) stack_top - 1;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return 1;
restorer = frame->retcode;
if(ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
/* Update SP now because the page fault handler refuses to extend
* the stack if the faulting address is too far below the current
* SP, which frame now certainly is. If there's an error, the original
* value is restored on the way out.
* When writing the sigcontext to the stack, we have to write the
* original value, so that's passed to copy_sc_to_user, which does
* the right thing with it.
*/
PT_REGS_SP(regs) = (unsigned long) frame;
err |= __put_user(restorer, &frame->pretcode);
err |= __put_user(sig, &frame->sig);
err |= copy_sc_to_user(&frame->sc, NULL, regs, save_sp);
err |= __put_user(mask->sig[0], &frame->sc.oldmask);
if (_NSIG_WORDS > 1)
err |= __copy_to_user(&frame->extramask, &mask->sig[1],
sizeof(frame->extramask));
/*
* This is popl %eax ; movl $,%eax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
if(err)
goto err;
PT_REGS_SP(regs) = (unsigned long) frame;
PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
PT_REGS_EAX(regs) = (unsigned long) sig;
PT_REGS_EDX(regs) = (unsigned long) 0;
PT_REGS_ECX(regs) = (unsigned long) 0;
if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
ptrace_notify(SIGTRAP);
return 0;
err:
PT_REGS_SP(regs) = save_sp;
return err;
}
int setup_signal_stack_si(unsigned long stack_top, int sig,
struct k_sigaction *ka, struct pt_regs *regs,
siginfo_t *info, sigset_t *mask)
{
struct rt_sigframe __user *frame;
void __user *restorer;
unsigned long save_sp = PT_REGS_SP(regs);
int err = 0;
stack_top &= -8UL;
frame = (struct rt_sigframe __user *) stack_top - 1;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return 1;
restorer = frame->retcode;
if(ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
/* See comment above about why this is here */
PT_REGS_SP(regs) = (unsigned long) frame;
err |= __put_user(restorer, &frame->pretcode);
err |= __put_user(sig, &frame->sig);
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
err |= copy_ucontext_to_user(&frame->uc, &frame->fpstate, mask,
save_sp);
/*
* This is movl $,%eax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
if(err)
goto err;
PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
PT_REGS_EAX(regs) = (unsigned long) sig;
PT_REGS_EDX(regs) = (unsigned long) &frame->info;
PT_REGS_ECX(regs) = (unsigned long) &frame->uc;
if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
ptrace_notify(SIGTRAP);
return 0;
err:
PT_REGS_SP(regs) = save_sp;
return err;
}
long sys_sigreturn(struct pt_regs regs)
{
unsigned long sp = PT_REGS_SP(&current->thread.regs);
struct sigframe __user *frame = (struct sigframe __user *)(sp - 8);
sigset_t set;
struct sigcontext __user *sc = &frame->sc;
unsigned long __user *oldmask = &sc->oldmask;
unsigned long __user *extramask = frame->extramask;
int sig_size = (_NSIG_WORDS - 1) * sizeof(unsigned long);
if(copy_from_user(&set.sig[0], oldmask, sizeof(set.sig[0])) ||
copy_from_user(&set.sig[1], extramask, sig_size))
goto segfault;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if(copy_sc_from_user(&current->thread.regs, sc))
goto segfault;
/* Avoid ERESTART handling */
PT_REGS_SYSCALL_NR(&current->thread.regs) = -1;
return PT_REGS_SYSCALL_RET(&current->thread.regs);
segfault:
force_sig(SIGSEGV, current);
return 0;
}
long sys_rt_sigreturn(struct pt_regs regs)
{
unsigned long sp = PT_REGS_SP(&current->thread.regs);
struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (sp - 4);
sigset_t set;
struct ucontext __user *uc = &frame->uc;
int sig_size = _NSIG_WORDS * sizeof(unsigned long);
if(copy_from_user(&set, &uc->uc_sigmask, sig_size))
goto segfault;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if(copy_sc_from_user(&current->thread.regs, &uc->uc_mcontext))
goto segfault;
/* Avoid ERESTART handling */
PT_REGS_SYSCALL_NR(&current->thread.regs) = -1;
return PT_REGS_SYSCALL_RET(&current->thread.regs);
segfault:
force_sig(SIGSEGV, current);
return 0;
}