linux/sound/soc/sof/sof-priv.h

770 lines
25 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* Copyright(c) 2018 Intel Corporation. All rights reserved.
*
* Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
*/
#ifndef __SOUND_SOC_SOF_PRIV_H
#define __SOUND_SOC_SOF_PRIV_H
#include <linux/device.h>
#include <sound/hdaudio.h>
#include <sound/sof.h>
#include <sound/sof/info.h>
#include <sound/sof/pm.h>
#include <sound/sof/trace.h>
#include <uapi/sound/sof/fw.h>
#include <sound/sof/ext_manifest.h>
/* Flag definitions used in sof_core_debug (sof_debug module parameter) */
#define SOF_DBG_ENABLE_TRACE BIT(0)
#define SOF_DBG_RETAIN_CTX BIT(1) /* prevent DSP D3 on FW exception */
#define SOF_DBG_VERIFY_TPLG BIT(2) /* verify topology during load */
#define SOF_DBG_DYNAMIC_PIPELINES_OVERRIDE BIT(3) /* 0: use topology token
* 1: override topology
*/
#define SOF_DBG_DYNAMIC_PIPELINES_ENABLE BIT(4) /* 0: use static pipelines
* 1: use dynamic pipelines
*/
#define SOF_DBG_DISABLE_MULTICORE BIT(5) /* schedule all pipelines/widgets
* on primary core
*/
#define SOF_DBG_PRINT_ALL_DUMPS BIT(6) /* Print all ipc and dsp dumps */
#define SOF_DBG_IGNORE_D3_PERSISTENT BIT(7) /* ignore the DSP D3 persistent capability
* and always download firmware upon D3 exit
*/
/* Flag definitions used for controlling the DSP dump behavior */
#define SOF_DBG_DUMP_REGS BIT(0)
#define SOF_DBG_DUMP_MBOX BIT(1)
#define SOF_DBG_DUMP_TEXT BIT(2)
#define SOF_DBG_DUMP_PCI BIT(3)
/* Output this dump (at the DEBUG level) only when SOF_DBG_PRINT_ALL_DUMPS is set */
#define SOF_DBG_DUMP_OPTIONAL BIT(4)
/* global debug state set by SOF_DBG_ flags */
bool sof_debug_check_flag(int mask);
/* max BARs mmaped devices can use */
#define SND_SOF_BARS 8
/* time in ms for runtime suspend delay */
#define SND_SOF_SUSPEND_DELAY_MS 2000
/* DMA buffer size for trace */
#define DMA_BUF_SIZE_FOR_TRACE (PAGE_SIZE * 16)
#define SOF_IPC_DSP_REPLY 0
#define SOF_IPC_HOST_REPLY 1
/* convenience constructor for DAI driver streams */
#define SOF_DAI_STREAM(sname, scmin, scmax, srates, sfmt) \
{.stream_name = sname, .channels_min = scmin, .channels_max = scmax, \
.rates = srates, .formats = sfmt}
#define SOF_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_FLOAT)
/* So far the primary core on all DSPs has ID 0 */
#define SOF_DSP_PRIMARY_CORE 0
/* max number of DSP cores */
#define SOF_MAX_DSP_NUM_CORES 8
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-29 22:07:22 +00:00
struct sof_dsp_power_state {
u32 state;
u32 substate; /* platform-specific */
};
/* System suspend target state */
enum sof_system_suspend_state {
SOF_SUSPEND_NONE = 0,
SOF_SUSPEND_S0IX,
SOF_SUSPEND_S3,
};
enum sof_dfsentry_type {
SOF_DFSENTRY_TYPE_IOMEM = 0,
SOF_DFSENTRY_TYPE_BUF,
};
enum sof_debugfs_access_type {
SOF_DEBUGFS_ACCESS_ALWAYS = 0,
SOF_DEBUGFS_ACCESS_D0_ONLY,
};
struct snd_sof_dev;
struct snd_sof_ipc_msg;
struct snd_sof_ipc;
struct snd_sof_debugfs_map;
struct snd_soc_tplg_ops;
struct snd_soc_component;
struct snd_sof_pdata;
/**
* struct snd_sof_platform_stream_params - platform dependent stream parameters
* @stream_tag: Stream tag to use
* @use_phy_addr: Use the provided @phy_addr for configuration
* @phy_addr: Platform dependent address to be used, if @use_phy_addr
* is true
* @no_ipc_position: Disable position update IPC from firmware
*/
struct snd_sof_platform_stream_params {
u16 stream_tag;
bool use_phy_address;
u32 phy_addr;
bool no_ipc_position;
};
/*
* SOF DSP HW abstraction operations.
* Used to abstract DSP HW architecture and any IO busses between host CPU
* and DSP device(s).
*/
struct snd_sof_dsp_ops {
/* probe/remove/shutdown */
int (*probe)(struct snd_sof_dev *sof_dev); /* mandatory */
int (*remove)(struct snd_sof_dev *sof_dev); /* optional */
int (*shutdown)(struct snd_sof_dev *sof_dev); /* optional */
/* DSP core boot / reset */
int (*run)(struct snd_sof_dev *sof_dev); /* mandatory */
int (*stall)(struct snd_sof_dev *sof_dev, unsigned int core_mask); /* optional */
int (*reset)(struct snd_sof_dev *sof_dev); /* optional */
int (*core_get)(struct snd_sof_dev *sof_dev, int core); /* optional */
int (*core_put)(struct snd_sof_dev *sof_dev, int core); /* optional */
/*
* Register IO: only used by respective drivers themselves,
* TODO: consider removing these operations and calling respective
* implementations directly
*/
void (*write)(struct snd_sof_dev *sof_dev, void __iomem *addr,
u32 value); /* optional */
u32 (*read)(struct snd_sof_dev *sof_dev,
void __iomem *addr); /* optional */
void (*write64)(struct snd_sof_dev *sof_dev, void __iomem *addr,
u64 value); /* optional */
u64 (*read64)(struct snd_sof_dev *sof_dev,
void __iomem *addr); /* optional */
/* memcpy IO */
int (*block_read)(struct snd_sof_dev *sof_dev,
enum snd_sof_fw_blk_type type, u32 offset,
void *dest, size_t size); /* mandatory */
int (*block_write)(struct snd_sof_dev *sof_dev,
enum snd_sof_fw_blk_type type, u32 offset,
void *src, size_t size); /* mandatory */
/* Mailbox IO */
void (*mailbox_read)(struct snd_sof_dev *sof_dev,
u32 offset, void *dest,
size_t size); /* optional */
void (*mailbox_write)(struct snd_sof_dev *sof_dev,
u32 offset, void *src,
size_t size); /* optional */
/* doorbell */
irqreturn_t (*irq_handler)(int irq, void *context); /* optional */
irqreturn_t (*irq_thread)(int irq, void *context); /* optional */
/* ipc */
int (*send_msg)(struct snd_sof_dev *sof_dev,
struct snd_sof_ipc_msg *msg); /* mandatory */
/* FW loading */
int (*load_firmware)(struct snd_sof_dev *sof_dev); /* mandatory */
int (*load_module)(struct snd_sof_dev *sof_dev,
struct snd_sof_mod_hdr *hdr); /* optional */
/* connect pcm substream to a host stream */
int (*pcm_open)(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream); /* optional */
/* disconnect pcm substream to a host stream */
int (*pcm_close)(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream); /* optional */
/* host stream hw params */
int (*pcm_hw_params)(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_sof_platform_stream_params *platform_params); /* optional */
/* host stream hw_free */
int (*pcm_hw_free)(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream); /* optional */
/* host stream trigger */
int (*pcm_trigger)(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream,
int cmd); /* optional */
/* host stream pointer */
snd_pcm_uframes_t (*pcm_pointer)(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream); /* optional */
/* pcm ack */
int (*pcm_ack)(struct snd_sof_dev *sdev, struct snd_pcm_substream *substream); /* optional */
/* host read DSP stream data */
int (*ipc_msg_data)(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream,
void *p, size_t sz); /* mandatory */
/* host side configuration of the stream's data offset in stream mailbox area */
int (*set_stream_data_offset)(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream,
size_t posn_offset); /* optional */
/* pre/post firmware run */
int (*pre_fw_run)(struct snd_sof_dev *sof_dev); /* optional */
int (*post_fw_run)(struct snd_sof_dev *sof_dev); /* optional */
/* parse platform specific extended manifest, optional */
int (*parse_platform_ext_manifest)(struct snd_sof_dev *sof_dev,
const struct sof_ext_man_elem_header *hdr);
/* DSP PM */
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-29 22:07:22 +00:00
int (*suspend)(struct snd_sof_dev *sof_dev,
u32 target_state); /* optional */
int (*resume)(struct snd_sof_dev *sof_dev); /* optional */
int (*runtime_suspend)(struct snd_sof_dev *sof_dev); /* optional */
int (*runtime_resume)(struct snd_sof_dev *sof_dev); /* optional */
int (*runtime_idle)(struct snd_sof_dev *sof_dev); /* optional */
int (*set_hw_params_upon_resume)(struct snd_sof_dev *sdev); /* optional */
int (*set_power_state)(struct snd_sof_dev *sdev,
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-29 22:07:22 +00:00
const struct sof_dsp_power_state *target_state); /* optional */
/* DSP clocking */
int (*set_clk)(struct snd_sof_dev *sof_dev, u32 freq); /* optional */
/* debug */
const struct snd_sof_debugfs_map *debug_map; /* optional */
int debug_map_count; /* optional */
void (*dbg_dump)(struct snd_sof_dev *sof_dev,
u32 flags); /* optional */
void (*ipc_dump)(struct snd_sof_dev *sof_dev); /* optional */
int (*debugfs_add_region_item)(struct snd_sof_dev *sdev,
enum snd_sof_fw_blk_type blk_type, u32 offset,
size_t size, const char *name,
enum sof_debugfs_access_type access_type); /* optional */
/* host DMA trace initialization */
int (*trace_init)(struct snd_sof_dev *sdev,
struct sof_ipc_dma_trace_params_ext *dtrace_params); /* optional */
int (*trace_release)(struct snd_sof_dev *sdev); /* optional */
int (*trace_trigger)(struct snd_sof_dev *sdev,
int cmd); /* optional */
/* misc */
int (*get_bar_index)(struct snd_sof_dev *sdev,
u32 type); /* optional */
int (*get_mailbox_offset)(struct snd_sof_dev *sdev);/* mandatory for common loader code */
int (*get_window_offset)(struct snd_sof_dev *sdev,
u32 id);/* mandatory for common loader code */
/* machine driver ops */
int (*machine_register)(struct snd_sof_dev *sdev,
void *pdata); /* optional */
void (*machine_unregister)(struct snd_sof_dev *sdev,
void *pdata); /* optional */
struct snd_soc_acpi_mach * (*machine_select)(struct snd_sof_dev *sdev); /* optional */
void (*set_mach_params)(struct snd_soc_acpi_mach *mach,
struct snd_sof_dev *sdev); /* optional */
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
/* IPC client ops */
int (*register_ipc_clients)(struct snd_sof_dev *sdev); /* optional */
void (*unregister_ipc_clients)(struct snd_sof_dev *sdev); /* optional */
/* DAI ops */
struct snd_soc_dai_driver *drv;
int num_drv;
/* ALSA HW info flags, will be stored in snd_pcm_runtime.hw.info */
u32 hw_info;
const struct dsp_arch_ops *dsp_arch_ops;
};
/* DSP architecture specific callbacks for oops and stack dumps */
struct dsp_arch_ops {
void (*dsp_oops)(struct snd_sof_dev *sdev, const char *level, void *oops);
void (*dsp_stack)(struct snd_sof_dev *sdev, const char *level, void *oops,
u32 *stack, u32 stack_words);
};
#define sof_dsp_arch_ops(sdev) ((sdev)->pdata->desc->ops->dsp_arch_ops)
/* FS entry for debug files that can expose DSP memories, registers */
struct snd_sof_dfsentry {
size_t size;
size_t buf_data_size; /* length of buffered data for file read operation */
enum sof_dfsentry_type type;
/*
* access_type specifies if the
* memory -> DSP resource (memory, register etc) is always accessible
* or if it is accessible only when the DSP is in D0.
*/
enum sof_debugfs_access_type access_type;
#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
char *cache_buf; /* buffer to cache the contents of debugfs memory */
#endif
struct snd_sof_dev *sdev;
struct list_head list; /* list in sdev dfsentry list */
union {
void __iomem *io_mem;
void *buf;
};
};
/* Debug mapping for any DSP memory or registers that can used for debug */
struct snd_sof_debugfs_map {
const char *name;
u32 bar;
u32 offset;
u32 size;
/*
* access_type specifies if the memory is always accessible
* or if it is accessible only when the DSP is in D0.
*/
enum sof_debugfs_access_type access_type;
};
/* mailbox descriptor, used for host <-> DSP IPC */
struct snd_sof_mailbox {
u32 offset;
size_t size;
};
/* IPC message descriptor for host <-> DSP IO */
struct snd_sof_ipc_msg {
/* message data */
void *msg_data;
void *reply_data;
size_t msg_size;
size_t reply_size;
int reply_error;
wait_queue_head_t waitq;
bool ipc_complete;
};
/**
* struct sof_ipc_pm_ops - IPC-specific PM ops
* @ctx_save: Function pointer for context save
* @ctx_restore: Function pointer for context restore
*/
struct sof_ipc_pm_ops {
int (*ctx_save)(struct snd_sof_dev *sdev);
int (*ctx_restore)(struct snd_sof_dev *sdev);
};
/**
* struct sof_ipc_fw_loader_ops - IPC/FW-specific loader ops
* @validate: Function pointer for validating the firmware image
* @parse_ext_manifest: Function pointer for parsing the manifest of the firmware
* @load_fw_to_dsp: Optional function pointer for loading the firmware to the
* DSP.
* The function implements generic, hardware independent way
* of loading the initial firmware and its modules (if any).
* @query_fw_configuration: Optional function pointer to query information and
* configuration from the booted firmware.
* Executed after the first successful firmware boot.
*/
struct sof_ipc_fw_loader_ops {
int (*validate)(struct snd_sof_dev *sdev);
size_t (*parse_ext_manifest)(struct snd_sof_dev *sdev);
int (*load_fw_to_dsp)(struct snd_sof_dev *sdev);
int (*query_fw_configuration)(struct snd_sof_dev *sdev);
};
struct sof_ipc_tplg_ops;
struct sof_ipc_pcm_ops;
/**
* struct sof_ipc_ops - IPC-specific ops
* @tplg: Pointer to IPC-specific topology ops
* @pm: Pointer to PM ops
* @pcm: Pointer to PCM ops
* @fw_loader: Pointer to Firmware Loader ops
*
* @tx_msg: Function pointer for sending a 'short' IPC message
* @set_get_data: Function pointer for set/get data ('large' IPC message). This
* function may split up the 'large' message and use the @tx_msg
* path to transfer individual chunks, or use other means to transfer
* the message.
* @get_reply: Function pointer for fetching the reply to
* sdev->ipc->msg.reply_data
* @rx_msg: Function pointer for handling a received message
*
* Note: both @tx_msg and @set_get_data considered as TX functions and they are
* serialized for the duration of the instructed transfer. A large message sent
* via @set_get_data is a single transfer even if at the hardware level it is
* handled with multiple chunks.
*/
struct sof_ipc_ops {
const struct sof_ipc_tplg_ops *tplg;
const struct sof_ipc_pm_ops *pm;
const struct sof_ipc_pcm_ops *pcm;
const struct sof_ipc_fw_loader_ops *fw_loader;
int (*tx_msg)(struct snd_sof_dev *sdev, void *msg_data, size_t msg_bytes,
void *reply_data, size_t reply_bytes, bool no_pm);
int (*set_get_data)(struct snd_sof_dev *sdev, void *data, size_t data_bytes,
bool set);
int (*get_reply)(struct snd_sof_dev *sdev);
void (*rx_msg)(struct snd_sof_dev *sdev);
};
/* SOF generic IPC data */
struct snd_sof_ipc {
struct snd_sof_dev *sdev;
/* protects messages and the disable flag */
struct mutex tx_mutex;
/* disables further sending of ipc's */
bool disable_ipc_tx;
/* Maximum allowed size of a single IPC message/reply */
size_t max_payload_size;
struct snd_sof_ipc_msg msg;
/* IPC ops based on version */
const struct sof_ipc_ops *ops;
};
enum sof_dtrace_state {
SOF_DTRACE_DISABLED,
SOF_DTRACE_STOPPED,
SOF_DTRACE_ENABLED,
};
/*
* SOF Device Level.
*/
struct snd_sof_dev {
struct device *dev;
spinlock_t ipc_lock; /* lock for IPC users */
spinlock_t hw_lock; /* lock for HW IO access */
/*
* ASoC components. plat_drv fields are set dynamically so
* can't use const
*/
struct snd_soc_component_driver plat_drv;
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-29 22:07:22 +00:00
/* current DSP power state */
struct sof_dsp_power_state dsp_power_state;
/* mutex to protect the dsp_power_state access */
struct mutex power_state_access;
/* Intended power target of system suspend */
enum sof_system_suspend_state system_suspend_target;
/* DSP firmware boot */
wait_queue_head_t boot_wait;
enum sof_fw_state fw_state;
bool first_boot;
/* work queue in case the probe is implemented in two steps */
struct work_struct probe_work;
bool probe_completed;
/* DSP HW differentiation */
struct snd_sof_pdata *pdata;
/* IPC */
struct snd_sof_ipc *ipc;
struct snd_sof_mailbox dsp_box; /* DSP initiated IPC */
struct snd_sof_mailbox host_box; /* Host initiated IPC */
struct snd_sof_mailbox stream_box; /* Stream position update */
struct snd_sof_mailbox debug_box; /* Debug info updates */
struct snd_sof_ipc_msg *msg;
int ipc_irq;
u32 next_comp_id; /* monotonic - reset during S3 */
/* memory bases for mmaped DSPs - set by dsp_init() */
void __iomem *bar[SND_SOF_BARS]; /* DSP base address */
int mmio_bar;
int mailbox_bar;
size_t dsp_oops_offset;
/* debug */
struct dentry *debugfs_root;
struct list_head dfsentry_list;
bool dbg_dump_printed;
bool ipc_dump_printed;
/* firmware loader */
struct sof_ipc_fw_ready fw_ready;
struct sof_ipc_fw_version fw_version;
struct sof_ipc_cc_version *cc_version;
/* topology */
struct snd_soc_tplg_ops *tplg_ops;
struct list_head pcm_list;
struct list_head kcontrol_list;
struct list_head widget_list;
struct list_head dai_list;
struct list_head dai_link_list;
struct list_head route_list;
struct snd_soc_component *component;
u32 enabled_cores_mask; /* keep track of enabled cores */
bool led_present;
/* FW configuration */
struct sof_ipc_window *info_window;
/* IPC timeouts in ms */
int ipc_timeout;
int boot_timeout;
/* DMA for Trace */
struct snd_dma_buffer dmatb;
struct snd_dma_buffer dmatp;
int dma_trace_pages;
wait_queue_head_t trace_sleep;
u32 host_offset;
bool dtrace_is_supported; /* set with Kconfig or module parameter */
bool dtrace_error;
bool dtrace_draining;
enum sof_dtrace_state dtrace_state;
bool msi_enabled;
/* DSP core context */
u32 num_cores;
/*
* ref count per core that will be modified during system suspend/resume and during pcm
* hw_params/hw_free. This doesn't need to be protected with a mutex because pcm
* hw_params/hw_free are already protected by the PCM mutex in the ALSA framework in
* sound/core/ when streams are active and during system suspend/resume, streams are
* already suspended.
*/
int dsp_core_ref_count[SOF_MAX_DSP_NUM_CORES];
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
/*
* Used to keep track of registered IPC client devices so that they can
* be removed when the parent SOF module is removed.
*/
struct list_head ipc_client_list;
/* mutex to protect client list */
struct mutex ipc_client_mutex;
/*
* Used for tracking the IPC client's RX registration for DSP initiated
* message handling.
*/
struct list_head ipc_rx_handler_list;
/*
* Used for tracking the IPC client's registration for DSP state change
* notification
*/
struct list_head fw_state_handler_list;
/* to protect the ipc_rx_handler_list and dsp_state_handler_list list */
struct mutex client_event_handler_mutex;
void *private; /* core does not touch this */
};
/*
* Device Level.
*/
int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data);
int snd_sof_device_remove(struct device *dev);
int snd_sof_device_shutdown(struct device *dev);
bool snd_sof_device_probe_completed(struct device *dev);
int snd_sof_runtime_suspend(struct device *dev);
int snd_sof_runtime_resume(struct device *dev);
int snd_sof_runtime_idle(struct device *dev);
int snd_sof_resume(struct device *dev);
int snd_sof_suspend(struct device *dev);
int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev);
int snd_sof_prepare(struct device *dev);
void snd_sof_complete(struct device *dev);
void snd_sof_new_platform_drv(struct snd_sof_dev *sdev);
/*
* Compress support
*/
extern struct snd_compress_ops sof_compressed_ops;
/*
* Firmware loading.
*/
int snd_sof_load_firmware_raw(struct snd_sof_dev *sdev);
int snd_sof_load_firmware_memcpy(struct snd_sof_dev *sdev);
int snd_sof_run_firmware(struct snd_sof_dev *sdev);
void snd_sof_fw_unload(struct snd_sof_dev *sdev);
/*
* IPC low level APIs.
*/
struct snd_sof_ipc *snd_sof_ipc_init(struct snd_sof_dev *sdev);
void snd_sof_ipc_free(struct snd_sof_dev *sdev);
void snd_sof_ipc_get_reply(struct snd_sof_dev *sdev);
void snd_sof_ipc_reply(struct snd_sof_dev *sdev, u32 msg_id);
static inline void snd_sof_ipc_msgs_rx(struct snd_sof_dev *sdev)
{
sdev->ipc->ops->rx_msg(sdev);
}
int sof_ipc_tx_message(struct snd_sof_ipc *ipc, void *msg_data, size_t msg_bytes,
void *reply_data, size_t reply_bytes);
int sof_ipc_tx_message_no_pm(struct snd_sof_ipc *ipc, void *msg_data, size_t msg_bytes,
void *reply_data, size_t reply_bytes);
int sof_ipc_send_msg(struct snd_sof_dev *sdev, void *msg_data, size_t msg_bytes,
size_t reply_bytes);
static inline void snd_sof_ipc_process_reply(struct snd_sof_dev *sdev, u32 msg_id)
{
snd_sof_ipc_get_reply(sdev);
snd_sof_ipc_reply(sdev, msg_id);
}
/*
* Trace/debug
*/
int snd_sof_init_trace(struct snd_sof_dev *sdev);
void snd_sof_free_trace(struct snd_sof_dev *sdev);
int snd_sof_dbg_init(struct snd_sof_dev *sdev);
void snd_sof_free_debug(struct snd_sof_dev *sdev);
int snd_sof_debugfs_buf_item(struct snd_sof_dev *sdev,
void *base, size_t size,
const char *name, mode_t mode);
int snd_sof_trace_update_pos(struct snd_sof_dev *sdev,
struct sof_ipc_dma_trace_posn *posn);
void snd_sof_trace_notify_for_error(struct snd_sof_dev *sdev);
void sof_print_oops_and_stack(struct snd_sof_dev *sdev, const char *level,
u32 panic_code, u32 tracep_code, void *oops,
struct sof_ipc_panic_info *panic_info,
void *stack, size_t stack_words);
void snd_sof_trace_suspend(struct snd_sof_dev *sdev, pm_message_t pm_state);
int snd_sof_trace_resume(struct snd_sof_dev *sdev);
void snd_sof_handle_fw_exception(struct snd_sof_dev *sdev);
int snd_sof_dbg_memory_info_init(struct snd_sof_dev *sdev);
int snd_sof_debugfs_add_region_item_iomem(struct snd_sof_dev *sdev,
enum snd_sof_fw_blk_type blk_type, u32 offset, size_t size,
const char *name, enum sof_debugfs_access_type access_type);
/*
* DSP Architectures.
*/
static inline void sof_stack(struct snd_sof_dev *sdev, const char *level,
void *oops, u32 *stack, u32 stack_words)
{
sof_dsp_arch_ops(sdev)->dsp_stack(sdev, level, oops, stack,
stack_words);
}
static inline void sof_oops(struct snd_sof_dev *sdev, const char *level, void *oops)
{
if (sof_dsp_arch_ops(sdev)->dsp_oops)
sof_dsp_arch_ops(sdev)->dsp_oops(sdev, level, oops);
}
extern const struct dsp_arch_ops sof_xtensa_arch_ops;
/*
* Firmware state tracking
*/
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
void sof_set_fw_state(struct snd_sof_dev *sdev, enum sof_fw_state new_state);
/*
* Utilities
*/
void sof_io_write(struct snd_sof_dev *sdev, void __iomem *addr, u32 value);
void sof_io_write64(struct snd_sof_dev *sdev, void __iomem *addr, u64 value);
u32 sof_io_read(struct snd_sof_dev *sdev, void __iomem *addr);
u64 sof_io_read64(struct snd_sof_dev *sdev, void __iomem *addr);
void sof_mailbox_write(struct snd_sof_dev *sdev, u32 offset,
void *message, size_t bytes);
void sof_mailbox_read(struct snd_sof_dev *sdev, u32 offset,
void *message, size_t bytes);
int sof_block_write(struct snd_sof_dev *sdev, enum snd_sof_fw_blk_type blk_type,
u32 offset, void *src, size_t size);
int sof_block_read(struct snd_sof_dev *sdev, enum snd_sof_fw_blk_type blk_type,
u32 offset, void *dest, size_t size);
int sof_ipc_msg_data(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream,
void *p, size_t sz);
int sof_set_stream_data_offset(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream,
size_t posn_offset);
int sof_stream_pcm_open(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream);
int sof_stream_pcm_close(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream);
int sof_machine_check(struct snd_sof_dev *sdev);
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
/* SOF client support */
#if IS_ENABLED(CONFIG_SND_SOC_SOF_CLIENT)
int sof_client_dev_register(struct snd_sof_dev *sdev, const char *name, u32 id,
const void *data, size_t size);
void sof_client_dev_unregister(struct snd_sof_dev *sdev, const char *name, u32 id);
int sof_register_clients(struct snd_sof_dev *sdev);
void sof_unregister_clients(struct snd_sof_dev *sdev);
void sof_client_ipc_rx_dispatcher(struct snd_sof_dev *sdev, void *msg_buf);
void sof_client_fw_state_dispatcher(struct snd_sof_dev *sdev);
int sof_suspend_clients(struct snd_sof_dev *sdev, pm_message_t state);
int sof_resume_clients(struct snd_sof_dev *sdev);
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
#else /* CONFIG_SND_SOC_SOF_CLIENT */
static inline int sof_client_dev_register(struct snd_sof_dev *sdev, const char *name,
u32 id, const void *data, size_t size)
{
return 0;
}
static inline void sof_client_dev_unregister(struct snd_sof_dev *sdev,
const char *name, u32 id)
{
}
static inline int sof_register_clients(struct snd_sof_dev *sdev)
{
return 0;
}
static inline void sof_unregister_clients(struct snd_sof_dev *sdev)
{
}
static inline void sof_client_ipc_rx_dispatcher(struct snd_sof_dev *sdev, void *msg_buf)
{
}
static inline void sof_client_fw_state_dispatcher(struct snd_sof_dev *sdev)
{
}
static inline int sof_suspend_clients(struct snd_sof_dev *sdev, pm_message_t state)
{
return 0;
}
static inline int sof_resume_clients(struct snd_sof_dev *sdev)
{
return 0;
}
ASoC: SOF: Introduce IPC SOF client support A client in the SOF (Sound Open Firmware) context is a driver that needs to communicate with the DSP via IPC messages. The SOF core is responsible for serializing the IPC messages to the DSP from the different clients. One example of an SOF client would be an IPC test client that floods the DSP with test IPC messages to validate if the serialization works as expected. Multi-client support will also add the ability to split the existing audio cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated client instead of adding HDMI to all cards. This patch introduces descriptors for SOF client driver and SOF client device along with APIs for registering and unregistering a SOF client driver, sending IPCs from a client device and accessing the SOF core debugfs root entry. Along with this, add a couple of new members to struct snd_sof_dev that will be used for maintaining the list of clients. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10 15:05:21 +00:00
#endif /* CONFIG_SND_SOC_SOF_CLIENT */
/* Main ops for IPC implementations */
extern const struct sof_ipc_ops ipc3_ops;
#endif