linux/include/acpi/aclocal.h

968 lines
31 KiB
C
Raw Normal View History

/******************************************************************************
*
* Name: aclocal.h - Internal data types used across the ACPI subsystem
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2008, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __ACLOCAL_H__
#define __ACLOCAL_H__
/* acpisrc:struct_defs -- for acpisrc conversion */
#define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
#define ACPI_DO_NOT_WAIT 0
#define ACPI_SERIALIZED 0xFF
typedef u32 acpi_mutex_handle;
#define ACPI_GLOBAL_LOCK (acpi_semaphore) (-1)
/* Total number of aml opcodes defined */
#define AML_NUM_OPCODES 0x7F
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 04:00:00 +00:00
/* Forward declarations */
struct acpi_walk_state;
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 04:00:00 +00:00
struct acpi_obj_mutex;
union acpi_parse_object;
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 04:00:00 +00:00
/*****************************************************************************
*
* Mutex typedefs and structs
*
****************************************************************************/
/*
* Predefined handles for the mutex objects used within the subsystem
* All mutex objects are automatically created by acpi_ut_mutex_initialize.
*
* The acquire/release ordering protocol is implied via this list. Mutexes
* with a lower value must be acquired before mutexes with a higher value.
*
* NOTE: any changes here must be reflected in the acpi_gbl_mutex_names
* table below also!
*/
#define ACPI_MTX_INTERPRETER 0 /* AML Interpreter, main lock */
#define ACPI_MTX_NAMESPACE 1 /* ACPI Namespace */
#define ACPI_MTX_TABLES 2 /* Data for ACPI tables */
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
#define ACPI_MTX_EVENTS 3 /* Data for ACPI events */
#define ACPI_MTX_CACHES 4 /* Internal caches, general purposes */
#define ACPI_MTX_MEMORY 5 /* Debug memory tracking lists */
#define ACPI_MTX_DEBUG_CMD_COMPLETE 6 /* AML debugger */
#define ACPI_MTX_DEBUG_CMD_READY 7 /* AML debugger */
#define ACPI_MAX_MUTEX 7
#define ACPI_NUM_MUTEX ACPI_MAX_MUTEX+1
#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
#ifdef DEFINE_ACPI_GLOBALS
/* Debug names for the mutexes above */
static char *acpi_gbl_mutex_names[ACPI_NUM_MUTEX] = {
"ACPI_MTX_Interpreter",
"ACPI_MTX_Tables",
"ACPI_MTX_Namespace",
"ACPI_MTX_Events",
"ACPI_MTX_Caches",
"ACPI_MTX_Memory",
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
"ACPI_MTX_CommandComplete",
"ACPI_MTX_CommandReady"
};
#endif
#endif
/*
* Predefined handles for spinlocks used within the subsystem.
* These spinlocks are created by acpi_ut_mutex_initialize
*/
#define ACPI_LOCK_GPES 0
#define ACPI_LOCK_HARDWARE 1
#define ACPI_MAX_LOCK 1
#define ACPI_NUM_LOCK ACPI_MAX_LOCK+1
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 04:00:00 +00:00
/* Owner IDs are used to track namespace nodes for selective deletion */
typedef u8 acpi_owner_id;
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 04:00:00 +00:00
#define ACPI_OWNER_ID_MAX 0xFF
/* This Thread ID means that the mutex is not in use (unlocked) */
#define ACPI_MUTEX_NOT_ACQUIRED (acpi_thread_id) 0
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 04:00:00 +00:00
/* Table for the global mutexes */
struct acpi_mutex_info {
acpi_mutex mutex;
u32 use_count;
acpi_thread_id thread_id;
};
/* Lock flag parameter for various interfaces */
#define ACPI_MTX_DO_NOT_LOCK 0
#define ACPI_MTX_LOCK 1
/* Field access granularities */
#define ACPI_FIELD_BYTE_GRANULARITY 1
#define ACPI_FIELD_WORD_GRANULARITY 2
#define ACPI_FIELD_DWORD_GRANULARITY 4
#define ACPI_FIELD_QWORD_GRANULARITY 8
#define ACPI_ENTRY_NOT_FOUND NULL
/*****************************************************************************
*
* Namespace typedefs and structs
*
****************************************************************************/
/* Operational modes of the AML interpreter/scanner */
typedef enum {
ACPI_IMODE_LOAD_PASS1 = 0x01,
ACPI_IMODE_LOAD_PASS2 = 0x02,
ACPI_IMODE_EXECUTE = 0x03
} acpi_interpreter_mode;
union acpi_name_union {
u32 integer;
char ascii[4];
};
/*
* The Namespace Node describes a named object that appears in the AML.
* descriptor_type is used to differentiate between internal descriptors.
*
* The node is optimized for both 32-bit and 64-bit platforms:
* 20 bytes for the 32-bit case, 32 bytes for the 64-bit case.
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 05:00:00 +00:00
*
* Note: The descriptor_type and Type fields must appear in the identical
* position in both the struct acpi_namespace_node and union acpi_operand_object
* structures.
*/
struct acpi_namespace_node {
union acpi_operand_object *object; /* Interpreter object */
u8 descriptor_type; /* Differentiate object descriptor types */
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 05:00:00 +00:00
u8 type; /* ACPI Type associated with this name */
u8 flags; /* Miscellaneous flags */
acpi_owner_id owner_id; /* Node creator */
union acpi_name_union name; /* ACPI Name, always 4 chars per ACPI spec */
struct acpi_namespace_node *child; /* First child */
struct acpi_namespace_node *peer; /* Peer. Parent if ANOBJ_END_OF_PEER_LIST set */
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 04:00:00 +00:00
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 05:00:00 +00:00
/*
* The following fields are used by the ASL compiler and disassembler only
*/
#ifdef ACPI_LARGE_NAMESPACE_NODE
union acpi_parse_object *op;
u32 value;
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 05:00:00 +00:00
u32 length;
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 04:00:00 +00:00
#endif
};
/* Namespace Node flags */
#define ANOBJ_END_OF_PEER_LIST 0x01 /* End-of-list, Peer field points to parent */
#define ANOBJ_TEMPORARY 0x02 /* Node is create by a method and is temporary */
#define ANOBJ_METHOD_ARG 0x04 /* Node is a method argument */
#define ANOBJ_METHOD_LOCAL 0x08 /* Node is a method local */
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
#define ANOBJ_SUBTREE_HAS_INI 0x10 /* Used to optimize device initialization */
#define ANOBJ_IS_EXTERNAL 0x08 /* i_aSL only: This object created via External() */
#define ANOBJ_METHOD_NO_RETVAL 0x10 /* i_aSL only: Method has no return value */
#define ANOBJ_METHOD_SOME_NO_RETVAL 0x20 /* i_aSL only: Method has at least one return value */
#define ANOBJ_IS_BIT_OFFSET 0x40 /* i_aSL only: Reference is a bit offset */
#define ANOBJ_IS_REFERENCED 0x80 /* i_aSL only: Object was referenced */
/*
* ACPI Table Descriptor. One per ACPI table
*/
struct acpi_table_desc {
acpi_physical_address address;
struct acpi_table_header *pointer;
u32 length; /* Length fixed at 32 bits */
union acpi_name_union signature;
acpi_owner_id owner_id;
u8 flags;
};
/* Flags for above */
#define ACPI_TABLE_ORIGIN_UNKNOWN (0)
#define ACPI_TABLE_ORIGIN_MAPPED (1)
#define ACPI_TABLE_ORIGIN_ALLOCATED (2)
#define ACPI_TABLE_ORIGIN_MASK (3)
#define ACPI_TABLE_IS_LOADED (4)
/* One internal RSDT for table management */
struct acpi_internal_rsdt {
struct acpi_table_desc *tables;
u32 count;
u32 size;
u8 flags;
};
/* Flags for above */
#define ACPI_ROOT_ORIGIN_UNKNOWN (0) /* ~ORIGIN_ALLOCATED */
#define ACPI_ROOT_ORIGIN_ALLOCATED (1)
#define ACPI_ROOT_ALLOW_RESIZE (2)
/* Predefined (fixed) table indexes */
#define ACPI_TABLE_INDEX_DSDT (0)
#define ACPI_TABLE_INDEX_FACS (1)
struct acpi_find_context {
char *search_for;
acpi_handle *list;
u32 *count;
};
struct acpi_ns_search_data {
struct acpi_namespace_node *node;
};
/*
* Predefined Namespace items
*/
struct acpi_predefined_names {
char *name;
u8 type;
char *val;
};
/* Object types used during package copies */
#define ACPI_COPY_TYPE_SIMPLE 0
#define ACPI_COPY_TYPE_PACKAGE 1
/* Info structure used to convert external<->internal namestrings */
struct acpi_namestring_info {
char *external_name;
char *next_external_char;
char *internal_name;
u32 length;
u32 num_segments;
u32 num_carats;
u8 fully_qualified;
};
/* Field creation info */
struct acpi_create_field_info {
struct acpi_namespace_node *region_node;
struct acpi_namespace_node *field_node;
struct acpi_namespace_node *register_node;
struct acpi_namespace_node *data_register_node;
u32 bank_value;
u32 field_bit_position;
u32 field_bit_length;
u8 field_flags;
u8 attribute;
u8 field_type;
};
typedef
acpi_status(*ACPI_INTERNAL_METHOD) (struct acpi_walk_state * walk_state);
/*
* Bitmapped ACPI types. Used internally only
*/
#define ACPI_BTYPE_ANY 0x00000000
#define ACPI_BTYPE_INTEGER 0x00000001
#define ACPI_BTYPE_STRING 0x00000002
#define ACPI_BTYPE_BUFFER 0x00000004
#define ACPI_BTYPE_PACKAGE 0x00000008
#define ACPI_BTYPE_FIELD_UNIT 0x00000010
#define ACPI_BTYPE_DEVICE 0x00000020
#define ACPI_BTYPE_EVENT 0x00000040
#define ACPI_BTYPE_METHOD 0x00000080
#define ACPI_BTYPE_MUTEX 0x00000100
#define ACPI_BTYPE_REGION 0x00000200
#define ACPI_BTYPE_POWER 0x00000400
#define ACPI_BTYPE_PROCESSOR 0x00000800
#define ACPI_BTYPE_THERMAL 0x00001000
#define ACPI_BTYPE_BUFFER_FIELD 0x00002000
#define ACPI_BTYPE_DDB_HANDLE 0x00004000
#define ACPI_BTYPE_DEBUG_OBJECT 0x00008000
#define ACPI_BTYPE_REFERENCE 0x00010000
#define ACPI_BTYPE_RESOURCE 0x00020000
#define ACPI_BTYPE_COMPUTE_DATA (ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_BUFFER)
#define ACPI_BTYPE_DATA (ACPI_BTYPE_COMPUTE_DATA | ACPI_BTYPE_PACKAGE)
#define ACPI_BTYPE_DATA_REFERENCE (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE | ACPI_BTYPE_DDB_HANDLE)
#define ACPI_BTYPE_DEVICE_OBJECTS (ACPI_BTYPE_DEVICE | ACPI_BTYPE_THERMAL | ACPI_BTYPE_PROCESSOR)
#define ACPI_BTYPE_OBJECTS_AND_REFS 0x0001FFFF /* ARG or LOCAL */
#define ACPI_BTYPE_ALL_OBJECTS 0x0000FFFF
/*****************************************************************************
*
* Event typedefs and structs
*
****************************************************************************/
/* Dispatch info for each GPE -- either a method or handler, cannot be both */
struct acpi_handler_info {
acpi_event_handler address; /* Address of handler, if any */
void *context; /* Context to be passed to handler */
struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */
};
union acpi_gpe_dispatch_info {
struct acpi_namespace_node *method_node; /* Method node for this GPE level */
struct acpi_handler_info *handler;
};
/*
* Information about a GPE, one per each GPE in an array.
* NOTE: Important to keep this struct as small as possible.
*/
struct acpi_gpe_event_info {
union acpi_gpe_dispatch_info dispatch; /* Either Method or Handler */
struct acpi_gpe_register_info *register_info; /* Backpointer to register info */
u8 flags; /* Misc info about this GPE */
u8 gpe_number; /* This GPE */
};
/* Information about a GPE register pair, one per each status/enable pair in an array */
struct acpi_gpe_register_info {
struct acpi_generic_address status_address; /* Address of status reg */
struct acpi_generic_address enable_address; /* Address of enable reg */
u8 enable_for_wake; /* GPEs to keep enabled when sleeping */
u8 enable_for_run; /* GPEs to keep enabled when running */
u8 base_gpe_number; /* Base GPE number for this register */
};
/*
* Information about a GPE register block, one per each installed block --
* GPE0, GPE1, and one per each installed GPE Block Device.
*/
struct acpi_gpe_block_info {
struct acpi_namespace_node *node;
struct acpi_gpe_block_info *previous;
struct acpi_gpe_block_info *next;
struct acpi_gpe_xrupt_info *xrupt_block; /* Backpointer to interrupt block */
struct acpi_gpe_register_info *register_info; /* One per GPE register pair */
struct acpi_gpe_event_info *event_info; /* One for each GPE */
struct acpi_generic_address block_address; /* Base address of the block */
u32 register_count; /* Number of register pairs in block */
u8 block_base_number; /* Base GPE number for this block */
};
/* Information about GPE interrupt handlers, one per each interrupt level used for GPEs */
struct acpi_gpe_xrupt_info {
struct acpi_gpe_xrupt_info *previous;
struct acpi_gpe_xrupt_info *next;
struct acpi_gpe_block_info *gpe_block_list_head; /* List of GPE blocks for this xrupt */
u32 interrupt_number; /* System interrupt number */
};
struct acpi_gpe_walk_info {
struct acpi_namespace_node *gpe_device;
struct acpi_gpe_block_info *gpe_block;
};
typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info *
gpe_xrupt_info,
struct acpi_gpe_block_info *
gpe_block);
/* Information about each particular fixed event */
struct acpi_fixed_event_handler {
acpi_event_handler handler; /* Address of handler. */
void *context; /* Context to be passed to handler */
};
struct acpi_fixed_event_info {
u8 status_register_id;
u8 enable_register_id;
u16 status_bit_mask;
u16 enable_bit_mask;
};
/* Information used during field processing */
struct acpi_field_info {
u8 skip_field;
u8 field_flag;
u32 pkg_length;
};
/*****************************************************************************
*
* Generic "state" object for stacks
*
****************************************************************************/
#define ACPI_CONTROL_NORMAL 0xC0
#define ACPI_CONTROL_CONDITIONAL_EXECUTING 0xC1
#define ACPI_CONTROL_PREDICATE_EXECUTING 0xC2
#define ACPI_CONTROL_PREDICATE_FALSE 0xC3
#define ACPI_CONTROL_PREDICATE_TRUE 0xC4
#define ACPI_STATE_COMMON \
void *next; \
u8 descriptor_type; /* To differentiate various internal objs */\
u8 flags; \
u16 value; \
u16 state;
/* There are 2 bytes available here until the next natural alignment boundary */
struct acpi_common_state {
ACPI_STATE_COMMON};
/*
* Update state - used to traverse complex objects such as packages
*/
struct acpi_update_state {
ACPI_STATE_COMMON union acpi_operand_object *object;
};
/*
* Pkg state - used to traverse nested package structures
*/
struct acpi_pkg_state {
ACPI_STATE_COMMON u16 index;
union acpi_operand_object *source_object;
union acpi_operand_object *dest_object;
struct acpi_walk_state *walk_state;
void *this_target_obj;
u32 num_packages;
};
/*
* Control state - one per if/else and while constructs.
* Allows nesting of these constructs
*/
struct acpi_control_state {
ACPI_STATE_COMMON u16 opcode;
union acpi_parse_object *predicate_op;
u8 *aml_predicate_start; /* Start of if/while predicate */
u8 *package_end; /* End of if/while block */
};
/*
* Scope state - current scope during namespace lookups
*/
struct acpi_scope_state {
ACPI_STATE_COMMON struct acpi_namespace_node *node;
};
struct acpi_pscope_state {
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 05:00:00 +00:00
ACPI_STATE_COMMON u32 arg_count; /* Number of fixed arguments */
union acpi_parse_object *op; /* Current op being parsed */
u8 *arg_end; /* Current argument end */
u8 *pkg_end; /* Current package end */
u32 arg_list; /* Next argument to parse */
};
/*
* Thread state - one per thread across multiple walk states. Multiple walk
* states are created when there are nested control methods executing.
*/
struct acpi_thread_state {
ACPI_STATE_COMMON u8 current_sync_level; /* Mutex Sync (nested acquire) level */
struct acpi_walk_state *walk_state_list; /* Head of list of walk_states for this thread */
union acpi_operand_object *acquired_mutex_list; /* List of all currently acquired mutexes */
acpi_thread_id thread_id; /* Running thread ID */
};
/*
* Result values - used to accumulate the results of nested
* AML arguments
*/
struct acpi_result_values {
ACPI_STATE_COMMON
union acpi_operand_object *obj_desc[ACPI_RESULTS_FRAME_OBJ_NUM];
};
typedef
acpi_status(*acpi_parse_downwards) (struct acpi_walk_state * walk_state,
union acpi_parse_object ** out_op);
typedef acpi_status(*acpi_parse_upwards) (struct acpi_walk_state * walk_state);
/*
* Notify info - used to pass info to the deferred notify
* handler/dispatcher.
*/
struct acpi_notify_info {
ACPI_STATE_COMMON struct acpi_namespace_node *node;
union acpi_operand_object *handler_obj;
};
/* Generic state is union of structs above */
union acpi_generic_state {
struct acpi_common_state common;
struct acpi_control_state control;
struct acpi_update_state update;
struct acpi_scope_state scope;
struct acpi_pscope_state parse_scope;
struct acpi_pkg_state pkg;
struct acpi_thread_state thread;
struct acpi_result_values results;
struct acpi_notify_info notify;
};
/*****************************************************************************
*
* Interpreter typedefs and structs
*
****************************************************************************/
typedef acpi_status(*ACPI_EXECUTE_OP) (struct acpi_walk_state * walk_state);
/*****************************************************************************
*
* Parser typedefs and structs
*
****************************************************************************/
/*
* AML opcode, name, and argument layout
*/
struct acpi_opcode_info {
#if defined(ACPI_DISASSEMBLER) || defined(ACPI_DEBUG_OUTPUT)
char *name; /* Opcode name (disassembler/debug only) */
#endif
u32 parse_args; /* Grammar/Parse time arguments */
u32 runtime_args; /* Interpret time arguments */
u16 flags; /* Misc flags */
u8 object_type; /* Corresponding internal object type */
u8 class; /* Opcode class */
u8 type; /* Opcode type */
};
union acpi_parse_value {
acpi_integer integer; /* Integer constant (Up to 64 bits) */
struct uint64_struct integer64; /* Structure overlay for 2 32-bit Dwords */
u32 size; /* bytelist or field size */
char *string; /* NULL terminated string */
u8 *buffer; /* buffer or string */
char *name; /* NULL terminated string */
union acpi_parse_object *arg; /* arguments and contained ops */
};
#define ACPI_PARSE_COMMON \
union acpi_parse_object *parent; /* Parent op */\
u8 descriptor_type; /* To differentiate various internal objs */\
u8 flags; /* Type of Op */\
u16 aml_opcode; /* AML opcode */\
u32 aml_offset; /* Offset of declaration in AML */\
union acpi_parse_object *next; /* Next op */\
struct acpi_namespace_node *node; /* For use by interpreter */\
union acpi_parse_value value; /* Value or args associated with the opcode */\
u8 arg_list_length; /* Number of elements in the arg list */\
ACPI_DISASM_ONLY_MEMBERS (\
u8 disasm_flags; /* Used during AML disassembly */\
u8 disasm_opcode; /* Subtype used for disassembly */\
char aml_op_name[16]) /* Op name (debug only) */
#define ACPI_DASM_BUFFER 0x00
#define ACPI_DASM_RESOURCE 0x01
#define ACPI_DASM_STRING 0x02
#define ACPI_DASM_UNICODE 0x03
#define ACPI_DASM_EISAID 0x04
#define ACPI_DASM_MATCHOP 0x05
#define ACPI_DASM_LNOT_PREFIX 0x06
#define ACPI_DASM_LNOT_SUFFIX 0x07
#define ACPI_DASM_IGNORE 0x08
/*
* Generic operation (for example: If, While, Store)
*/
struct acpi_parse_obj_common {
ACPI_PARSE_COMMON};
/*
* Extended Op for named ops (Scope, Method, etc.), deferred ops (Methods and op_regions),
* and bytelists.
*/
struct acpi_parse_obj_named {
ACPI_PARSE_COMMON u8 *path;
u8 *data; /* AML body or bytelist data */
u32 length; /* AML length */
u32 name; /* 4-byte name or zero if no name */
};
/* This version is used by the i_aSL compiler only */
[ACPI] ACPICA 20051117 Fixed a problem in the AML parser where the method thread count could be decremented below zero if any errors occurred during the method parse phase. This should eliminate AE_AML_METHOD_LIMIT exceptions seen on some machines. This also fixed a related regression with the mechanism that detects and corrects methods that cannot properly handle reentrancy (related to the deployment of the new OwnerId mechanism.) Eliminated the pre-parsing of control methods (to detect errors) during table load. Related to the problem above, this was causing unwind issues if any errors occurred during the parse, and it seemed to be overkill. A table load should not be aborted if there are problems with any single control method, thus rendering this feature rather pointless. Fixed a problem with the new table-driven resource manager where an internal buffer overflow could occur for small resource templates. Implemented a new external interface, acpi_get_vendor_resource() This interface will find and return a vendor-defined resource descriptor within a _CRS or _PRS method via an ACPI 3.0 UUID match. (from Bjorn Helgaas) Removed the length limit (200) on string objects as per the upcoming ACPI 3.0A specification. This affects the following areas of the interpreter: 1) any implicit conversion of a Buffer to a String, 2) a String object result of the ASL Concatentate operator, 3) the String object result of the ASL ToString operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-11-17 18:07:00 +00:00
#define ACPI_MAX_PARSEOP_NAME 20
struct acpi_parse_obj_asl {
ACPI_PARSE_COMMON union acpi_parse_object *child;
union acpi_parse_object *parent_method;
char *filename;
char *external_name;
char *namepath;
char name_seg[4];
u32 extra_value;
u32 column;
u32 line_number;
u32 logical_line_number;
u32 logical_byte_offset;
u32 end_line;
u32 end_logical_line;
u32 acpi_btype;
u32 aml_length;
u32 aml_subtree_length;
u32 final_aml_length;
u32 final_aml_offset;
u32 compile_flags;
u16 parse_opcode;
u8 aml_opcode_length;
u8 aml_pkg_len_bytes;
u8 extra;
[ACPI] ACPICA 20051117 Fixed a problem in the AML parser where the method thread count could be decremented below zero if any errors occurred during the method parse phase. This should eliminate AE_AML_METHOD_LIMIT exceptions seen on some machines. This also fixed a related regression with the mechanism that detects and corrects methods that cannot properly handle reentrancy (related to the deployment of the new OwnerId mechanism.) Eliminated the pre-parsing of control methods (to detect errors) during table load. Related to the problem above, this was causing unwind issues if any errors occurred during the parse, and it seemed to be overkill. A table load should not be aborted if there are problems with any single control method, thus rendering this feature rather pointless. Fixed a problem with the new table-driven resource manager where an internal buffer overflow could occur for small resource templates. Implemented a new external interface, acpi_get_vendor_resource() This interface will find and return a vendor-defined resource descriptor within a _CRS or _PRS method via an ACPI 3.0 UUID match. (from Bjorn Helgaas) Removed the length limit (200) on string objects as per the upcoming ACPI 3.0A specification. This affects the following areas of the interpreter: 1) any implicit conversion of a Buffer to a String, 2) a String object result of the ASL Concatentate operator, 3) the String object result of the ASL ToString operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-11-17 18:07:00 +00:00
char parse_op_name[ACPI_MAX_PARSEOP_NAME];
};
union acpi_parse_object {
struct acpi_parse_obj_common common;
struct acpi_parse_obj_named named;
struct acpi_parse_obj_asl asl;
};
/*
* Parse state - one state per parser invocation and each control
* method.
*/
struct acpi_parse_state {
u8 *aml_start; /* First AML byte */
u8 *aml; /* Next AML byte */
u8 *aml_end; /* (last + 1) AML byte */
u8 *pkg_start; /* Current package begin */
u8 *pkg_end; /* Current package end */
union acpi_parse_object *start_op; /* Root of parse tree */
struct acpi_namespace_node *start_node;
union acpi_generic_state *scope; /* Current scope */
union acpi_parse_object *start_scope;
u32 aml_size;
};
/* Parse object flags */
#define ACPI_PARSEOP_GENERIC 0x01
#define ACPI_PARSEOP_NAMED 0x02
#define ACPI_PARSEOP_DEFERRED 0x04
#define ACPI_PARSEOP_BYTELIST 0x08
#define ACPI_PARSEOP_IN_STACK 0x10
#define ACPI_PARSEOP_TARGET 0x20
#define ACPI_PARSEOP_IN_CACHE 0x80
/* Parse object disasm_flags */
#define ACPI_PARSEOP_IGNORE 0x01
#define ACPI_PARSEOP_PARAMLIST 0x02
#define ACPI_PARSEOP_EMPTY_TERMLIST 0x04
#define ACPI_PARSEOP_SPECIAL 0x10
/*****************************************************************************
*
* Hardware (ACPI registers) and PNP
*
****************************************************************************/
#define PCI_ROOT_HID_STRING "PNP0A03"
#define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08"
struct acpi_bit_register_info {
u8 parent_register;
u8 bit_position;
u16 access_bit_mask;
};
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
/*
* Some ACPI registers have bits that must be ignored -- meaning that they
* must be preserved.
*/
#define ACPI_PM1_STATUS_PRESERVED_BITS 0x0800 /* Bit 11 */
#define ACPI_PM1_CONTROL_PRESERVED_BITS 0x0200 /* Bit 9 (whatever) */
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 21:04:00 +00:00
/*
* Register IDs
* These are the full ACPI registers
*/
#define ACPI_REGISTER_PM1_STATUS 0x01
#define ACPI_REGISTER_PM1_ENABLE 0x02
#define ACPI_REGISTER_PM1_CONTROL 0x03
#define ACPI_REGISTER_PM1A_CONTROL 0x04
#define ACPI_REGISTER_PM1B_CONTROL 0x05
#define ACPI_REGISTER_PM2_CONTROL 0x06
#define ACPI_REGISTER_PM_TIMER 0x07
#define ACPI_REGISTER_PROCESSOR_BLOCK 0x08
#define ACPI_REGISTER_SMI_COMMAND_BLOCK 0x09
/* Masks used to access the bit_registers */
#define ACPI_BITMASK_TIMER_STATUS 0x0001
#define ACPI_BITMASK_BUS_MASTER_STATUS 0x0010
#define ACPI_BITMASK_GLOBAL_LOCK_STATUS 0x0020
#define ACPI_BITMASK_POWER_BUTTON_STATUS 0x0100
#define ACPI_BITMASK_SLEEP_BUTTON_STATUS 0x0200
#define ACPI_BITMASK_RT_CLOCK_STATUS 0x0400
#define ACPI_BITMASK_PCIEXP_WAKE_STATUS 0x4000 /* ACPI 3.0 */
#define ACPI_BITMASK_WAKE_STATUS 0x8000
#define ACPI_BITMASK_ALL_FIXED_STATUS (\
ACPI_BITMASK_TIMER_STATUS | \
ACPI_BITMASK_BUS_MASTER_STATUS | \
ACPI_BITMASK_GLOBAL_LOCK_STATUS | \
ACPI_BITMASK_POWER_BUTTON_STATUS | \
ACPI_BITMASK_SLEEP_BUTTON_STATUS | \
ACPI_BITMASK_RT_CLOCK_STATUS | \
ACPI_BITMASK_WAKE_STATUS)
#define ACPI_BITMASK_TIMER_ENABLE 0x0001
#define ACPI_BITMASK_GLOBAL_LOCK_ENABLE 0x0020
#define ACPI_BITMASK_POWER_BUTTON_ENABLE 0x0100
#define ACPI_BITMASK_SLEEP_BUTTON_ENABLE 0x0200
#define ACPI_BITMASK_RT_CLOCK_ENABLE 0x0400
#define ACPI_BITMASK_PCIEXP_WAKE_DISABLE 0x4000 /* ACPI 3.0 */
#define ACPI_BITMASK_SCI_ENABLE 0x0001
#define ACPI_BITMASK_BUS_MASTER_RLD 0x0002
#define ACPI_BITMASK_GLOBAL_LOCK_RELEASE 0x0004
#define ACPI_BITMASK_SLEEP_TYPE_X 0x1C00
#define ACPI_BITMASK_SLEEP_ENABLE 0x2000
#define ACPI_BITMASK_ARB_DISABLE 0x0001
/* Raw bit position of each bit_register */
#define ACPI_BITPOSITION_TIMER_STATUS 0x00
#define ACPI_BITPOSITION_BUS_MASTER_STATUS 0x04
#define ACPI_BITPOSITION_GLOBAL_LOCK_STATUS 0x05
#define ACPI_BITPOSITION_POWER_BUTTON_STATUS 0x08
#define ACPI_BITPOSITION_SLEEP_BUTTON_STATUS 0x09
#define ACPI_BITPOSITION_RT_CLOCK_STATUS 0x0A
#define ACPI_BITPOSITION_PCIEXP_WAKE_STATUS 0x0E /* ACPI 3.0 */
#define ACPI_BITPOSITION_WAKE_STATUS 0x0F
#define ACPI_BITPOSITION_TIMER_ENABLE 0x00
#define ACPI_BITPOSITION_GLOBAL_LOCK_ENABLE 0x05
#define ACPI_BITPOSITION_POWER_BUTTON_ENABLE 0x08
#define ACPI_BITPOSITION_SLEEP_BUTTON_ENABLE 0x09
#define ACPI_BITPOSITION_RT_CLOCK_ENABLE 0x0A
#define ACPI_BITPOSITION_PCIEXP_WAKE_DISABLE 0x0E /* ACPI 3.0 */
#define ACPI_BITPOSITION_SCI_ENABLE 0x00
#define ACPI_BITPOSITION_BUS_MASTER_RLD 0x01
#define ACPI_BITPOSITION_GLOBAL_LOCK_RELEASE 0x02
#define ACPI_BITPOSITION_SLEEP_TYPE_X 0x0A
#define ACPI_BITPOSITION_SLEEP_ENABLE 0x0D
#define ACPI_BITPOSITION_ARB_DISABLE 0x00
/*****************************************************************************
*
* Resource descriptors
*
****************************************************************************/
/* resource_type values */
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 23:03:00 +00:00
#define ACPI_ADDRESS_TYPE_MEMORY_RANGE 0
#define ACPI_ADDRESS_TYPE_IO_RANGE 1
#define ACPI_ADDRESS_TYPE_BUS_NUMBER_RANGE 2
/* Resource descriptor types and masks */
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 23:03:00 +00:00
#define ACPI_RESOURCE_NAME_LARGE 0x80
#define ACPI_RESOURCE_NAME_SMALL 0x00
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 23:03:00 +00:00
#define ACPI_RESOURCE_NAME_SMALL_MASK 0x78 /* Bits 6:3 contain the type */
#define ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK 0x07 /* Bits 2:0 contain the length */
#define ACPI_RESOURCE_NAME_LARGE_MASK 0x7F /* Bits 6:0 contain the type */
/*
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 23:03:00 +00:00
* Small resource descriptor "names" as defined by the ACPI specification.
* Note: Bits 2:0 are used for the descriptor length
*/
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 23:03:00 +00:00
#define ACPI_RESOURCE_NAME_IRQ 0x20
#define ACPI_RESOURCE_NAME_DMA 0x28
#define ACPI_RESOURCE_NAME_START_DEPENDENT 0x30
#define ACPI_RESOURCE_NAME_END_DEPENDENT 0x38
#define ACPI_RESOURCE_NAME_IO 0x40
#define ACPI_RESOURCE_NAME_FIXED_IO 0x48
#define ACPI_RESOURCE_NAME_RESERVED_S1 0x50
#define ACPI_RESOURCE_NAME_RESERVED_S2 0x58
#define ACPI_RESOURCE_NAME_RESERVED_S3 0x60
#define ACPI_RESOURCE_NAME_RESERVED_S4 0x68
#define ACPI_RESOURCE_NAME_VENDOR_SMALL 0x70
#define ACPI_RESOURCE_NAME_END_TAG 0x78
/*
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 23:03:00 +00:00
* Large resource descriptor "names" as defined by the ACPI specification.
* Note: includes the Large Descriptor bit in bit[7]
*/
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 23:03:00 +00:00
#define ACPI_RESOURCE_NAME_MEMORY24 0x81
#define ACPI_RESOURCE_NAME_GENERIC_REGISTER 0x82
#define ACPI_RESOURCE_NAME_RESERVED_L1 0x83
#define ACPI_RESOURCE_NAME_VENDOR_LARGE 0x84
#define ACPI_RESOURCE_NAME_MEMORY32 0x85
#define ACPI_RESOURCE_NAME_FIXED_MEMORY32 0x86
#define ACPI_RESOURCE_NAME_ADDRESS32 0x87
#define ACPI_RESOURCE_NAME_ADDRESS16 0x88
#define ACPI_RESOURCE_NAME_EXTENDED_IRQ 0x89
#define ACPI_RESOURCE_NAME_ADDRESS64 0x8A
#define ACPI_RESOURCE_NAME_EXTENDED_ADDRESS64 0x8B
#define ACPI_RESOURCE_NAME_LARGE_MAX 0x8B
/*****************************************************************************
*
* Miscellaneous
*
****************************************************************************/
#define ACPI_ASCII_ZERO 0x30
/*****************************************************************************
*
* Debugger
*
****************************************************************************/
struct acpi_db_method_info {
acpi_handle main_thread_gate;
acpi_handle thread_complete_gate;
u32 *threads;
u32 num_threads;
u32 num_created;
u32 num_completed;
char *name;
u32 flags;
u32 num_loops;
char pathname[128];
char **args;
/*
* Arguments to be passed to method for the command
* Threads -
* the Number of threads, ID of current thread and
* Index of current thread inside all them created.
*/
char init_args;
char *arguments[4];
char num_threads_str[11];
char id_of_thread_str[11];
char index_of_thread_str[11];
};
struct acpi_integrity_info {
u32 nodes;
u32 objects;
};
#define ACPI_DB_REDIRECTABLE_OUTPUT 0x01
#define ACPI_DB_CONSOLE_OUTPUT 0x02
#define ACPI_DB_DUPLICATE_OUTPUT 0x03
/*****************************************************************************
*
* Debug
*
****************************************************************************/
/* Entry for a memory allocation (debug only) */
#define ACPI_MEM_MALLOC 0
#define ACPI_MEM_CALLOC 1
#define ACPI_MAX_MODULE_NAME 16
#define ACPI_COMMON_DEBUG_MEM_HEADER \
struct acpi_debug_mem_block *previous; \
struct acpi_debug_mem_block *next; \
u32 size; \
u32 component; \
u32 line; \
char module[ACPI_MAX_MODULE_NAME]; \
u8 alloc_type;
struct acpi_debug_mem_header {
ACPI_COMMON_DEBUG_MEM_HEADER};
struct acpi_debug_mem_block {
ACPI_COMMON_DEBUG_MEM_HEADER u64 user_space;
};
#define ACPI_MEM_LIST_GLOBAL 0
#define ACPI_MEM_LIST_NSNODE 1
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 04:00:00 +00:00
#define ACPI_MEM_LIST_MAX 1
#define ACPI_NUM_MEM_LISTS 2
struct acpi_memory_list {
char *list_name;
void *list_head;
u16 object_size;
u16 max_depth;
u16 current_depth;
u16 link_offset;
#ifdef ACPI_DBG_TRACK_ALLOCATIONS
/* Statistics for debug memory tracking only */
u32 total_allocated;
u32 total_freed;
u32 max_occupied;
u32 total_size;
u32 current_total_size;
u32 requests;
u32 hits;
#endif
};
#endif /* __ACLOCAL_H__ */