linux/fs/xfs/xfs_iomap.c

1150 lines
31 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* Copyright (c) 2016 Christoph Hellwig.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/iomap.h>
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_defer.h"
#include "xfs_inode.h"
#include "xfs_btree.h"
#include "xfs_bmap_btree.h"
#include "xfs_bmap.h"
#include "xfs_bmap_util.h"
#include "xfs_error.h"
#include "xfs_trans.h"
#include "xfs_trans_space.h"
#include "xfs_iomap.h"
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:14:59 +00:00
#include "xfs_trace.h"
#include "xfs_icache.h"
#include "xfs_quota.h"
#include "xfs_dquot_item.h"
#include "xfs_dquot.h"
#include "xfs_reflink.h"
#define XFS_WRITEIO_ALIGN(mp,off) (((off) >> mp->m_writeio_log) \
<< mp->m_writeio_log)
void
xfs_bmbt_to_iomap(
struct xfs_inode *ip,
struct iomap *iomap,
struct xfs_bmbt_irec *imap)
{
struct xfs_mount *mp = ip->i_mount;
if (imap->br_startblock == HOLESTARTBLOCK) {
iomap->blkno = IOMAP_NULL_BLOCK;
iomap->type = IOMAP_HOLE;
} else if (imap->br_startblock == DELAYSTARTBLOCK) {
iomap->blkno = IOMAP_NULL_BLOCK;
iomap->type = IOMAP_DELALLOC;
} else {
iomap->blkno = xfs_fsb_to_db(ip, imap->br_startblock);
if (imap->br_state == XFS_EXT_UNWRITTEN)
iomap->type = IOMAP_UNWRITTEN;
else
iomap->type = IOMAP_MAPPED;
}
iomap->offset = XFS_FSB_TO_B(mp, imap->br_startoff);
iomap->length = XFS_FSB_TO_B(mp, imap->br_blockcount);
iomap->bdev = xfs_find_bdev_for_inode(VFS_I(ip));
}
xfs_extlen_t
xfs_eof_alignment(
struct xfs_inode *ip,
xfs_extlen_t extsize)
{
struct xfs_mount *mp = ip->i_mount;
xfs_extlen_t align = 0;
if (!XFS_IS_REALTIME_INODE(ip)) {
/*
* Round up the allocation request to a stripe unit
* (m_dalign) boundary if the file size is >= stripe unit
* size, and we are allocating past the allocation eof.
*
* If mounted with the "-o swalloc" option the alignment is
* increased from the strip unit size to the stripe width.
*/
if (mp->m_swidth && (mp->m_flags & XFS_MOUNT_SWALLOC))
align = mp->m_swidth;
else if (mp->m_dalign)
align = mp->m_dalign;
if (align && XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, align))
align = 0;
}
/*
* Always round up the allocation request to an extent boundary
* (when file on a real-time subvolume or has di_extsize hint).
*/
if (extsize) {
if (align)
align = roundup_64(align, extsize);
else
align = extsize;
}
return align;
}
STATIC int
xfs_iomap_eof_align_last_fsb(
struct xfs_inode *ip,
xfs_extlen_t extsize,
xfs_fileoff_t *last_fsb)
{
xfs_extlen_t align = xfs_eof_alignment(ip, extsize);
if (align) {
xfs_fileoff_t new_last_fsb = roundup_64(*last_fsb, align);
int eof, error;
error = xfs_bmap_eof(ip, new_last_fsb, XFS_DATA_FORK, &eof);
if (error)
return error;
if (eof)
*last_fsb = new_last_fsb;
}
return 0;
}
STATIC int
xfs_alert_fsblock_zero(
xfs_inode_t *ip,
xfs_bmbt_irec_t *imap)
{
xfs_alert_tag(ip->i_mount, XFS_PTAG_FSBLOCK_ZERO,
"Access to block zero in inode %llu "
"start_block: %llx start_off: %llx "
"blkcnt: %llx extent-state: %x",
(unsigned long long)ip->i_ino,
(unsigned long long)imap->br_startblock,
(unsigned long long)imap->br_startoff,
(unsigned long long)imap->br_blockcount,
imap->br_state);
return -EFSCORRUPTED;
}
int
xfs_iomap_write_direct(
xfs_inode_t *ip,
xfs_off_t offset,
size_t count,
xfs_bmbt_irec_t *imap,
int nmaps)
{
xfs_mount_t *mp = ip->i_mount;
xfs_fileoff_t offset_fsb;
xfs_fileoff_t last_fsb;
xfs_filblks_t count_fsb, resaligned;
xfs_fsblock_t firstfsb;
xfs_extlen_t extsz, temp;
int nimaps;
int quota_flag;
int rt;
xfs_trans_t *tp;
struct xfs_defer_ops dfops;
uint qblocks, resblks, resrtextents;
int error;
xfs: add missing ilock around dio write last extent alignment The iomap codepath (via get_blocks()) acquires and release the inode lock in the case of a direct write that requires block allocation. This is because xfs_iomap_write_direct() allocates a transaction, which means the ilock must be dropped and reacquired after the transaction is allocated and reserved. xfs_iomap_write_direct() invokes xfs_iomap_eof_align_last_fsb() before the transaction is created and thus before the ilock is reacquired. This can lead to calls to xfs_iread_extents() and reads of the in-core extent list without any synchronization (via xfs_bmap_eof() and xfs_bmap_last_extent()). xfs_iread_extents() assert fails if the ilock is not held, but this is not currently seen in practice as the current callers had already invoked xfs_bmapi_read(). What has been seen in practice are reports of crashes down in the xfs_bmap_eof() codepath on direct writes due to seemingly bogus pointer references from xfs_iext_get_ext(). While an explicit reproducer is not currently available to confirm the cause of the problem, crash analysis and code inspection from David Jeffrey had identified the insufficient locking. xfs_iomap_eof_align_last_fsb() is called from other contexts with the inode lock already held, so we cannot acquire it therein. __xfs_get_blocks() acquires and drops the ilock with variable flags to cover the event that the extent list must be read in. The common case is that __xfs_get_blocks() acquires the shared ilock. To provide locking around the last extent alignment call without adding more lock cycles to the dio path, update xfs_iomap_write_direct() to expect the shared ilock held on entry and do the extent alignment under its protection. Demote the lock, if necessary, from __xfs_get_blocks() and push the xfs_qm_dqattach() call outside of the shared lock critical section. Also, add an assert to document that the extent list is always expected to be present in this path. Otherwise, we risk a call to xfs_iread_extents() while under the shared ilock. This is safe as all current callers have executed an xfs_bmapi_read() call under the current iolock context. Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 04:34:20 +00:00
int lockmode;
xfs: Don't use unwritten extents for DAX DAX has a page fault serialisation problem with block allocation. Because it allows concurrent page faults and does not have a page lock to serialise faults to the same page, it can get two concurrent faults to the page that race. When two read faults race, this isn't a huge problem as the data underlying the page is not changing and so "detect and drop" works just fine. The issues are to do with write faults. When two write faults occur, we serialise block allocation in get_blocks() so only one faul will allocate the extent. It will, however, be marked as an unwritten extent, and that is where the problem lies - the DAX fault code cannot differentiate between a block that was just allocated and a block that was preallocated and needs zeroing. The result is that both write faults end up zeroing the block and attempting to convert it back to written. The problem is that the first fault can zero and convert before the second fault starts zeroing, resulting in the zeroing for the second fault overwriting the data that the first fault wrote with zeros. The second fault then attempts to convert the unwritten extent, which is then a no-op because it's already written. Data loss occurs as a result of this race. Because there is no sane locking construct in the page fault code that we can use for serialisation across the page faults, we need to ensure block allocation and zeroing occurs atomically in the filesystem. This means we can still take concurrent page faults and the only time they will serialise is in the filesystem mapping/allocation callback. The page fault code will always see written, initialised extents, so we will be able to remove the unwritten extent handling from the DAX code when all filesystems are converted. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-03 01:37:00 +00:00
int bmapi_flags = XFS_BMAPI_PREALLOC;
uint tflags = 0;
rt = XFS_IS_REALTIME_INODE(ip);
extsz = xfs_get_extsz_hint(ip);
xfs: add missing ilock around dio write last extent alignment The iomap codepath (via get_blocks()) acquires and release the inode lock in the case of a direct write that requires block allocation. This is because xfs_iomap_write_direct() allocates a transaction, which means the ilock must be dropped and reacquired after the transaction is allocated and reserved. xfs_iomap_write_direct() invokes xfs_iomap_eof_align_last_fsb() before the transaction is created and thus before the ilock is reacquired. This can lead to calls to xfs_iread_extents() and reads of the in-core extent list without any synchronization (via xfs_bmap_eof() and xfs_bmap_last_extent()). xfs_iread_extents() assert fails if the ilock is not held, but this is not currently seen in practice as the current callers had already invoked xfs_bmapi_read(). What has been seen in practice are reports of crashes down in the xfs_bmap_eof() codepath on direct writes due to seemingly bogus pointer references from xfs_iext_get_ext(). While an explicit reproducer is not currently available to confirm the cause of the problem, crash analysis and code inspection from David Jeffrey had identified the insufficient locking. xfs_iomap_eof_align_last_fsb() is called from other contexts with the inode lock already held, so we cannot acquire it therein. __xfs_get_blocks() acquires and drops the ilock with variable flags to cover the event that the extent list must be read in. The common case is that __xfs_get_blocks() acquires the shared ilock. To provide locking around the last extent alignment call without adding more lock cycles to the dio path, update xfs_iomap_write_direct() to expect the shared ilock held on entry and do the extent alignment under its protection. Demote the lock, if necessary, from __xfs_get_blocks() and push the xfs_qm_dqattach() call outside of the shared lock critical section. Also, add an assert to document that the extent list is always expected to be present in this path. Otherwise, we risk a call to xfs_iread_extents() while under the shared ilock. This is safe as all current callers have executed an xfs_bmapi_read() call under the current iolock context. Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 04:34:20 +00:00
lockmode = XFS_ILOCK_SHARED; /* locked by caller */
ASSERT(xfs_isilocked(ip, lockmode));
offset_fsb = XFS_B_TO_FSBT(mp, offset);
last_fsb = XFS_B_TO_FSB(mp, ((xfs_ufsize_t)(offset + count)));
if ((offset + count) > XFS_ISIZE(ip)) {
xfs: add missing ilock around dio write last extent alignment The iomap codepath (via get_blocks()) acquires and release the inode lock in the case of a direct write that requires block allocation. This is because xfs_iomap_write_direct() allocates a transaction, which means the ilock must be dropped and reacquired after the transaction is allocated and reserved. xfs_iomap_write_direct() invokes xfs_iomap_eof_align_last_fsb() before the transaction is created and thus before the ilock is reacquired. This can lead to calls to xfs_iread_extents() and reads of the in-core extent list without any synchronization (via xfs_bmap_eof() and xfs_bmap_last_extent()). xfs_iread_extents() assert fails if the ilock is not held, but this is not currently seen in practice as the current callers had already invoked xfs_bmapi_read(). What has been seen in practice are reports of crashes down in the xfs_bmap_eof() codepath on direct writes due to seemingly bogus pointer references from xfs_iext_get_ext(). While an explicit reproducer is not currently available to confirm the cause of the problem, crash analysis and code inspection from David Jeffrey had identified the insufficient locking. xfs_iomap_eof_align_last_fsb() is called from other contexts with the inode lock already held, so we cannot acquire it therein. __xfs_get_blocks() acquires and drops the ilock with variable flags to cover the event that the extent list must be read in. The common case is that __xfs_get_blocks() acquires the shared ilock. To provide locking around the last extent alignment call without adding more lock cycles to the dio path, update xfs_iomap_write_direct() to expect the shared ilock held on entry and do the extent alignment under its protection. Demote the lock, if necessary, from __xfs_get_blocks() and push the xfs_qm_dqattach() call outside of the shared lock critical section. Also, add an assert to document that the extent list is always expected to be present in this path. Otherwise, we risk a call to xfs_iread_extents() while under the shared ilock. This is safe as all current callers have executed an xfs_bmapi_read() call under the current iolock context. Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 04:34:20 +00:00
/*
* Assert that the in-core extent list is present since this can
* call xfs_iread_extents() and we only have the ilock shared.
* This should be safe because the lock was held around a bmapi
* call in the caller and we only need it to access the in-core
* list.
*/
ASSERT(XFS_IFORK_PTR(ip, XFS_DATA_FORK)->if_flags &
XFS_IFEXTENTS);
error = xfs_iomap_eof_align_last_fsb(ip, extsz, &last_fsb);
if (error)
xfs: add missing ilock around dio write last extent alignment The iomap codepath (via get_blocks()) acquires and release the inode lock in the case of a direct write that requires block allocation. This is because xfs_iomap_write_direct() allocates a transaction, which means the ilock must be dropped and reacquired after the transaction is allocated and reserved. xfs_iomap_write_direct() invokes xfs_iomap_eof_align_last_fsb() before the transaction is created and thus before the ilock is reacquired. This can lead to calls to xfs_iread_extents() and reads of the in-core extent list without any synchronization (via xfs_bmap_eof() and xfs_bmap_last_extent()). xfs_iread_extents() assert fails if the ilock is not held, but this is not currently seen in practice as the current callers had already invoked xfs_bmapi_read(). What has been seen in practice are reports of crashes down in the xfs_bmap_eof() codepath on direct writes due to seemingly bogus pointer references from xfs_iext_get_ext(). While an explicit reproducer is not currently available to confirm the cause of the problem, crash analysis and code inspection from David Jeffrey had identified the insufficient locking. xfs_iomap_eof_align_last_fsb() is called from other contexts with the inode lock already held, so we cannot acquire it therein. __xfs_get_blocks() acquires and drops the ilock with variable flags to cover the event that the extent list must be read in. The common case is that __xfs_get_blocks() acquires the shared ilock. To provide locking around the last extent alignment call without adding more lock cycles to the dio path, update xfs_iomap_write_direct() to expect the shared ilock held on entry and do the extent alignment under its protection. Demote the lock, if necessary, from __xfs_get_blocks() and push the xfs_qm_dqattach() call outside of the shared lock critical section. Also, add an assert to document that the extent list is always expected to be present in this path. Otherwise, we risk a call to xfs_iread_extents() while under the shared ilock. This is safe as all current callers have executed an xfs_bmapi_read() call under the current iolock context. Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 04:34:20 +00:00
goto out_unlock;
} else {
if (nmaps && (imap->br_startblock == HOLESTARTBLOCK))
last_fsb = MIN(last_fsb, (xfs_fileoff_t)
imap->br_blockcount +
imap->br_startoff);
}
count_fsb = last_fsb - offset_fsb;
ASSERT(count_fsb > 0);
resaligned = count_fsb;
if (unlikely(extsz)) {
if ((temp = do_mod(offset_fsb, extsz)))
resaligned += temp;
if ((temp = do_mod(resaligned, extsz)))
resaligned += extsz - temp;
}
if (unlikely(rt)) {
resrtextents = qblocks = resaligned;
resrtextents /= mp->m_sb.sb_rextsize;
resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0);
quota_flag = XFS_QMOPT_RES_RTBLKS;
} else {
resrtextents = 0;
resblks = qblocks = XFS_DIOSTRAT_SPACE_RES(mp, resaligned);
quota_flag = XFS_QMOPT_RES_REGBLKS;
}
xfs: add missing ilock around dio write last extent alignment The iomap codepath (via get_blocks()) acquires and release the inode lock in the case of a direct write that requires block allocation. This is because xfs_iomap_write_direct() allocates a transaction, which means the ilock must be dropped and reacquired after the transaction is allocated and reserved. xfs_iomap_write_direct() invokes xfs_iomap_eof_align_last_fsb() before the transaction is created and thus before the ilock is reacquired. This can lead to calls to xfs_iread_extents() and reads of the in-core extent list without any synchronization (via xfs_bmap_eof() and xfs_bmap_last_extent()). xfs_iread_extents() assert fails if the ilock is not held, but this is not currently seen in practice as the current callers had already invoked xfs_bmapi_read(). What has been seen in practice are reports of crashes down in the xfs_bmap_eof() codepath on direct writes due to seemingly bogus pointer references from xfs_iext_get_ext(). While an explicit reproducer is not currently available to confirm the cause of the problem, crash analysis and code inspection from David Jeffrey had identified the insufficient locking. xfs_iomap_eof_align_last_fsb() is called from other contexts with the inode lock already held, so we cannot acquire it therein. __xfs_get_blocks() acquires and drops the ilock with variable flags to cover the event that the extent list must be read in. The common case is that __xfs_get_blocks() acquires the shared ilock. To provide locking around the last extent alignment call without adding more lock cycles to the dio path, update xfs_iomap_write_direct() to expect the shared ilock held on entry and do the extent alignment under its protection. Demote the lock, if necessary, from __xfs_get_blocks() and push the xfs_qm_dqattach() call outside of the shared lock critical section. Also, add an assert to document that the extent list is always expected to be present in this path. Otherwise, we risk a call to xfs_iread_extents() while under the shared ilock. This is safe as all current callers have executed an xfs_bmapi_read() call under the current iolock context. Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 04:34:20 +00:00
/*
* Drop the shared lock acquired by the caller, attach the dquot if
* necessary and move on to transaction setup.
*/
xfs_iunlock(ip, lockmode);
error = xfs_qm_dqattach(ip, 0);
if (error)
return error;
xfs: Don't use unwritten extents for DAX DAX has a page fault serialisation problem with block allocation. Because it allows concurrent page faults and does not have a page lock to serialise faults to the same page, it can get two concurrent faults to the page that race. When two read faults race, this isn't a huge problem as the data underlying the page is not changing and so "detect and drop" works just fine. The issues are to do with write faults. When two write faults occur, we serialise block allocation in get_blocks() so only one faul will allocate the extent. It will, however, be marked as an unwritten extent, and that is where the problem lies - the DAX fault code cannot differentiate between a block that was just allocated and a block that was preallocated and needs zeroing. The result is that both write faults end up zeroing the block and attempting to convert it back to written. The problem is that the first fault can zero and convert before the second fault starts zeroing, resulting in the zeroing for the second fault overwriting the data that the first fault wrote with zeros. The second fault then attempts to convert the unwritten extent, which is then a no-op because it's already written. Data loss occurs as a result of this race. Because there is no sane locking construct in the page fault code that we can use for serialisation across the page faults, we need to ensure block allocation and zeroing occurs atomically in the filesystem. This means we can still take concurrent page faults and the only time they will serialise is in the filesystem mapping/allocation callback. The page fault code will always see written, initialised extents, so we will be able to remove the unwritten extent handling from the DAX code when all filesystems are converted. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-03 01:37:00 +00:00
/*
* For DAX, we do not allocate unwritten extents, but instead we zero
* the block before we commit the transaction. Ideally we'd like to do
* this outside the transaction context, but if we commit and then crash
* we may not have zeroed the blocks and this will be exposed on
* recovery of the allocation. Hence we must zero before commit.
*
xfs: Don't use unwritten extents for DAX DAX has a page fault serialisation problem with block allocation. Because it allows concurrent page faults and does not have a page lock to serialise faults to the same page, it can get two concurrent faults to the page that race. When two read faults race, this isn't a huge problem as the data underlying the page is not changing and so "detect and drop" works just fine. The issues are to do with write faults. When two write faults occur, we serialise block allocation in get_blocks() so only one faul will allocate the extent. It will, however, be marked as an unwritten extent, and that is where the problem lies - the DAX fault code cannot differentiate between a block that was just allocated and a block that was preallocated and needs zeroing. The result is that both write faults end up zeroing the block and attempting to convert it back to written. The problem is that the first fault can zero and convert before the second fault starts zeroing, resulting in the zeroing for the second fault overwriting the data that the first fault wrote with zeros. The second fault then attempts to convert the unwritten extent, which is then a no-op because it's already written. Data loss occurs as a result of this race. Because there is no sane locking construct in the page fault code that we can use for serialisation across the page faults, we need to ensure block allocation and zeroing occurs atomically in the filesystem. This means we can still take concurrent page faults and the only time they will serialise is in the filesystem mapping/allocation callback. The page fault code will always see written, initialised extents, so we will be able to remove the unwritten extent handling from the DAX code when all filesystems are converted. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-03 01:37:00 +00:00
* Further, if we are mapping unwritten extents here, we need to zero
* and convert them to written so that we don't need an unwritten extent
* callback for DAX. This also means that we need to be able to dip into
* the reserve block pool for bmbt block allocation if there is no space
* left but we need to do unwritten extent conversion.
xfs: Don't use unwritten extents for DAX DAX has a page fault serialisation problem with block allocation. Because it allows concurrent page faults and does not have a page lock to serialise faults to the same page, it can get two concurrent faults to the page that race. When two read faults race, this isn't a huge problem as the data underlying the page is not changing and so "detect and drop" works just fine. The issues are to do with write faults. When two write faults occur, we serialise block allocation in get_blocks() so only one faul will allocate the extent. It will, however, be marked as an unwritten extent, and that is where the problem lies - the DAX fault code cannot differentiate between a block that was just allocated and a block that was preallocated and needs zeroing. The result is that both write faults end up zeroing the block and attempting to convert it back to written. The problem is that the first fault can zero and convert before the second fault starts zeroing, resulting in the zeroing for the second fault overwriting the data that the first fault wrote with zeros. The second fault then attempts to convert the unwritten extent, which is then a no-op because it's already written. Data loss occurs as a result of this race. Because there is no sane locking construct in the page fault code that we can use for serialisation across the page faults, we need to ensure block allocation and zeroing occurs atomically in the filesystem. This means we can still take concurrent page faults and the only time they will serialise is in the filesystem mapping/allocation callback. The page fault code will always see written, initialised extents, so we will be able to remove the unwritten extent handling from the DAX code when all filesystems are converted. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-03 01:37:00 +00:00
*/
if (IS_DAX(VFS_I(ip))) {
bmapi_flags = XFS_BMAPI_CONVERT | XFS_BMAPI_ZERO;
if (ISUNWRITTEN(imap)) {
tflags |= XFS_TRANS_RESERVE;
resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0) << 1;
}
xfs: Don't use unwritten extents for DAX DAX has a page fault serialisation problem with block allocation. Because it allows concurrent page faults and does not have a page lock to serialise faults to the same page, it can get two concurrent faults to the page that race. When two read faults race, this isn't a huge problem as the data underlying the page is not changing and so "detect and drop" works just fine. The issues are to do with write faults. When two write faults occur, we serialise block allocation in get_blocks() so only one faul will allocate the extent. It will, however, be marked as an unwritten extent, and that is where the problem lies - the DAX fault code cannot differentiate between a block that was just allocated and a block that was preallocated and needs zeroing. The result is that both write faults end up zeroing the block and attempting to convert it back to written. The problem is that the first fault can zero and convert before the second fault starts zeroing, resulting in the zeroing for the second fault overwriting the data that the first fault wrote with zeros. The second fault then attempts to convert the unwritten extent, which is then a no-op because it's already written. Data loss occurs as a result of this race. Because there is no sane locking construct in the page fault code that we can use for serialisation across the page faults, we need to ensure block allocation and zeroing occurs atomically in the filesystem. This means we can still take concurrent page faults and the only time they will serialise is in the filesystem mapping/allocation callback. The page fault code will always see written, initialised extents, so we will be able to remove the unwritten extent handling from the DAX code when all filesystems are converted. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-03 01:37:00 +00:00
}
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_write, resblks, resrtextents,
tflags, &tp);
if (error)
return error;
xfs: add missing ilock around dio write last extent alignment The iomap codepath (via get_blocks()) acquires and release the inode lock in the case of a direct write that requires block allocation. This is because xfs_iomap_write_direct() allocates a transaction, which means the ilock must be dropped and reacquired after the transaction is allocated and reserved. xfs_iomap_write_direct() invokes xfs_iomap_eof_align_last_fsb() before the transaction is created and thus before the ilock is reacquired. This can lead to calls to xfs_iread_extents() and reads of the in-core extent list without any synchronization (via xfs_bmap_eof() and xfs_bmap_last_extent()). xfs_iread_extents() assert fails if the ilock is not held, but this is not currently seen in practice as the current callers had already invoked xfs_bmapi_read(). What has been seen in practice are reports of crashes down in the xfs_bmap_eof() codepath on direct writes due to seemingly bogus pointer references from xfs_iext_get_ext(). While an explicit reproducer is not currently available to confirm the cause of the problem, crash analysis and code inspection from David Jeffrey had identified the insufficient locking. xfs_iomap_eof_align_last_fsb() is called from other contexts with the inode lock already held, so we cannot acquire it therein. __xfs_get_blocks() acquires and drops the ilock with variable flags to cover the event that the extent list must be read in. The common case is that __xfs_get_blocks() acquires the shared ilock. To provide locking around the last extent alignment call without adding more lock cycles to the dio path, update xfs_iomap_write_direct() to expect the shared ilock held on entry and do the extent alignment under its protection. Demote the lock, if necessary, from __xfs_get_blocks() and push the xfs_qm_dqattach() call outside of the shared lock critical section. Also, add an assert to document that the extent list is always expected to be present in this path. Otherwise, we risk a call to xfs_iread_extents() while under the shared ilock. This is safe as all current callers have executed an xfs_bmapi_read() call under the current iolock context. Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 04:34:20 +00:00
lockmode = XFS_ILOCK_EXCL;
xfs_ilock(ip, lockmode);
error = xfs_trans_reserve_quota_nblks(tp, ip, qblocks, 0, quota_flag);
if (error)
goto out_trans_cancel;
xfs_trans_ijoin(tp, ip, 0);
/*
* From this point onwards we overwrite the imap pointer that the
* caller gave to us.
*/
xfs_defer_init(&dfops, &firstfsb);
nimaps = 1;
error = xfs_bmapi_write(tp, ip, offset_fsb, count_fsb,
bmapi_flags, &firstfsb, resblks, imap,
&nimaps, &dfops);
if (error)
goto out_bmap_cancel;
/*
* Complete the transaction
*/
error = xfs_defer_finish(&tp, &dfops, NULL);
if (error)
goto out_bmap_cancel;
xfs: Don't use unwritten extents for DAX DAX has a page fault serialisation problem with block allocation. Because it allows concurrent page faults and does not have a page lock to serialise faults to the same page, it can get two concurrent faults to the page that race. When two read faults race, this isn't a huge problem as the data underlying the page is not changing and so "detect and drop" works just fine. The issues are to do with write faults. When two write faults occur, we serialise block allocation in get_blocks() so only one faul will allocate the extent. It will, however, be marked as an unwritten extent, and that is where the problem lies - the DAX fault code cannot differentiate between a block that was just allocated and a block that was preallocated and needs zeroing. The result is that both write faults end up zeroing the block and attempting to convert it back to written. The problem is that the first fault can zero and convert before the second fault starts zeroing, resulting in the zeroing for the second fault overwriting the data that the first fault wrote with zeros. The second fault then attempts to convert the unwritten extent, which is then a no-op because it's already written. Data loss occurs as a result of this race. Because there is no sane locking construct in the page fault code that we can use for serialisation across the page faults, we need to ensure block allocation and zeroing occurs atomically in the filesystem. This means we can still take concurrent page faults and the only time they will serialise is in the filesystem mapping/allocation callback. The page fault code will always see written, initialised extents, so we will be able to remove the unwritten extent handling from the DAX code when all filesystems are converted. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-03 01:37:00 +00:00
error = xfs_trans_commit(tp);
if (error)
goto out_unlock;
/*
* Copy any maps to caller's array and return any error.
*/
if (nimaps == 0) {
error = -ENOSPC;
goto out_unlock;
}
if (!(imap->br_startblock || XFS_IS_REALTIME_INODE(ip)))
error = xfs_alert_fsblock_zero(ip, imap);
out_unlock:
xfs: add missing ilock around dio write last extent alignment The iomap codepath (via get_blocks()) acquires and release the inode lock in the case of a direct write that requires block allocation. This is because xfs_iomap_write_direct() allocates a transaction, which means the ilock must be dropped and reacquired after the transaction is allocated and reserved. xfs_iomap_write_direct() invokes xfs_iomap_eof_align_last_fsb() before the transaction is created and thus before the ilock is reacquired. This can lead to calls to xfs_iread_extents() and reads of the in-core extent list without any synchronization (via xfs_bmap_eof() and xfs_bmap_last_extent()). xfs_iread_extents() assert fails if the ilock is not held, but this is not currently seen in practice as the current callers had already invoked xfs_bmapi_read(). What has been seen in practice are reports of crashes down in the xfs_bmap_eof() codepath on direct writes due to seemingly bogus pointer references from xfs_iext_get_ext(). While an explicit reproducer is not currently available to confirm the cause of the problem, crash analysis and code inspection from David Jeffrey had identified the insufficient locking. xfs_iomap_eof_align_last_fsb() is called from other contexts with the inode lock already held, so we cannot acquire it therein. __xfs_get_blocks() acquires and drops the ilock with variable flags to cover the event that the extent list must be read in. The common case is that __xfs_get_blocks() acquires the shared ilock. To provide locking around the last extent alignment call without adding more lock cycles to the dio path, update xfs_iomap_write_direct() to expect the shared ilock held on entry and do the extent alignment under its protection. Demote the lock, if necessary, from __xfs_get_blocks() and push the xfs_qm_dqattach() call outside of the shared lock critical section. Also, add an assert to document that the extent list is always expected to be present in this path. Otherwise, we risk a call to xfs_iread_extents() while under the shared ilock. This is safe as all current callers have executed an xfs_bmapi_read() call under the current iolock context. Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 04:34:20 +00:00
xfs_iunlock(ip, lockmode);
return error;
out_bmap_cancel:
xfs_defer_cancel(&dfops);
xfs_trans_unreserve_quota_nblks(tp, ip, (long)qblocks, 0, quota_flag);
out_trans_cancel:
xfs_trans_cancel(tp);
goto out_unlock;
}
STATIC bool
xfs_quota_need_throttle(
struct xfs_inode *ip,
int type,
xfs_fsblock_t alloc_blocks)
{
struct xfs_dquot *dq = xfs_inode_dquot(ip, type);
if (!dq || !xfs_this_quota_on(ip->i_mount, type))
return false;
/* no hi watermark, no throttle */
if (!dq->q_prealloc_hi_wmark)
return false;
/* under the lo watermark, no throttle */
if (dq->q_res_bcount + alloc_blocks < dq->q_prealloc_lo_wmark)
return false;
return true;
}
STATIC void
xfs_quota_calc_throttle(
struct xfs_inode *ip,
int type,
xfs_fsblock_t *qblocks,
int *qshift,
int64_t *qfreesp)
{
int64_t freesp;
int shift = 0;
struct xfs_dquot *dq = xfs_inode_dquot(ip, type);
/* no dq, or over hi wmark, squash the prealloc completely */
if (!dq || dq->q_res_bcount >= dq->q_prealloc_hi_wmark) {
*qblocks = 0;
*qfreesp = 0;
return;
}
freesp = dq->q_prealloc_hi_wmark - dq->q_res_bcount;
if (freesp < dq->q_low_space[XFS_QLOWSP_5_PCNT]) {
shift = 2;
if (freesp < dq->q_low_space[XFS_QLOWSP_3_PCNT])
shift += 2;
if (freesp < dq->q_low_space[XFS_QLOWSP_1_PCNT])
shift += 2;
}
if (freesp < *qfreesp)
*qfreesp = freesp;
/* only overwrite the throttle values if we are more aggressive */
if ((freesp >> shift) < (*qblocks >> *qshift)) {
*qblocks = freesp;
*qshift = shift;
}
}
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
/*
* If we are doing a write at the end of the file and there are no allocations
* past this one, then extend the allocation out to the file system's write
* iosize.
*
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
* If we don't have a user specified preallocation size, dynamically increase
* the preallocation size as the size of the file grows. Cap the maximum size
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
* at a single extent or less if the filesystem is near full. The closer the
* filesystem is to full, the smaller the maximum prealocation.
*
* As an exception we don't do any preallocation at all if the file is smaller
* than the minimum preallocation and we are using the default dynamic
* preallocation scheme, as it is likely this is the only write to the file that
* is going to be done.
*
* We clean up any extra space left over when the file is closed in
* xfs_inactive().
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
*/
STATIC xfs_fsblock_t
xfs_iomap_prealloc_size(
xfs: limit speculative prealloc size on sparse files Speculative preallocation based on the current file size works well for contiguous files, but is sub-optimal for sparse files where the EOF preallocation can fill holes and result in large amounts of zeros being written when it is not necessary. The algorithm is modified to prevent EOF speculative preallocation from triggering larger allocations on IO patterns of truncate--to-zero-seek-write-seek-write-.... which results in non-sparse files for large files. This, unfortunately, is the way cp now behaves when copying sparse files and so needs to be fixed. What this code does is that it looks at the existing extent adjacent to the current EOF and if it determines that it is a hole we disable speculative preallocation altogether. To avoid the next write from doing a large prealloc, it takes the size of subsequent preallocations from the current size of the existing EOF extent. IOWs, if you leave a hole in the file, it resets preallocation behaviour to the same as if it was a zero size file. Example new behaviour: $ xfs_io -f -c "pwrite 0 31m" \ -c "pwrite 33m 1m" \ -c "pwrite 128m 1m" \ -c "fiemap -v" /mnt/scratch/blah wrote 32505856/32505856 bytes at offset 0 31 MiB, 7936 ops; 0.0000 sec (1.608 GiB/sec and 421432.7439 ops/sec) wrote 1048576/1048576 bytes at offset 34603008 1 MiB, 256 ops; 0.0000 sec (1.462 GiB/sec and 383233.5329 ops/sec) wrote 1048576/1048576 bytes at offset 134217728 1 MiB, 256 ops; 0.0000 sec (1.719 GiB/sec and 450704.2254 ops/sec) /mnt/scratch/blah: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..65535]: 96..65631 65536 0x0 1: [65536..67583]: hole 2048 2: [67584..69631]: 67680..69727 2048 0x0 3: [69632..262143]: hole 192512 4: [262144..264191]: 262240..264287 2048 0x1 Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-02-11 05:05:01 +00:00
struct xfs_inode *ip,
loff_t offset,
loff_t count,
xfs_extnum_t idx,
struct xfs_bmbt_irec *prev)
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
{
struct xfs_mount *mp = ip->i_mount;
xfs_fileoff_t offset_fsb = XFS_B_TO_FSBT(mp, offset);
int shift = 0;
int64_t freesp;
xfs_fsblock_t qblocks;
int qshift = 0;
xfs_fsblock_t alloc_blocks = 0;
if (offset + count <= XFS_ISIZE(ip))
return 0;
if (!(mp->m_flags & XFS_MOUNT_DFLT_IOSIZE) &&
(XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_writeio_blocks)))
return 0;
/*
* If an explicit allocsize is set, the file is small, or we
* are writing behind a hole, then use the minimum prealloc:
*/
if ((mp->m_flags & XFS_MOUNT_DFLT_IOSIZE) ||
XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_dalign) ||
idx == 0 ||
prev->br_startoff + prev->br_blockcount < offset_fsb)
return mp->m_writeio_blocks;
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
/*
* Determine the initial size of the preallocation. We are beyond the
* current EOF here, but we need to take into account whether this is
* a sparse write or an extending write when determining the
* preallocation size. Hence we need to look up the extent that ends
* at the current write offset and use the result to determine the
* preallocation size.
*
* If the extent is a hole, then preallocation is essentially disabled.
* Otherwise we take the size of the preceding data extent as the basis
* for the preallocation size. If the size of the extent is greater than
* half the maximum extent length, then use the current offset as the
* basis. This ensures that for large files the preallocation size
* always extends to MAXEXTLEN rather than falling short due to things
* like stripe unit/width alignment of real extents.
*/
if (prev->br_blockcount <= (MAXEXTLEN >> 1))
alloc_blocks = prev->br_blockcount << 1;
else
alloc_blocks = XFS_B_TO_FSB(mp, offset);
if (!alloc_blocks)
goto check_writeio;
qblocks = alloc_blocks;
/*
* MAXEXTLEN is not a power of two value but we round the prealloc down
* to the nearest power of two value after throttling. To prevent the
* round down from unconditionally reducing the maximum supported prealloc
* size, we round up first, apply appropriate throttling, round down and
* cap the value to MAXEXTLEN.
*/
alloc_blocks = XFS_FILEOFF_MIN(roundup_pow_of_two(MAXEXTLEN),
alloc_blocks);
freesp = percpu_counter_read_positive(&mp->m_fdblocks);
if (freesp < mp->m_low_space[XFS_LOWSP_5_PCNT]) {
shift = 2;
if (freesp < mp->m_low_space[XFS_LOWSP_4_PCNT])
shift++;
if (freesp < mp->m_low_space[XFS_LOWSP_3_PCNT])
shift++;
if (freesp < mp->m_low_space[XFS_LOWSP_2_PCNT])
shift++;
if (freesp < mp->m_low_space[XFS_LOWSP_1_PCNT])
shift++;
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
}
/*
* Check each quota to cap the prealloc size, provide a shift value to
* throttle with and adjust amount of available space.
*/
if (xfs_quota_need_throttle(ip, XFS_DQ_USER, alloc_blocks))
xfs_quota_calc_throttle(ip, XFS_DQ_USER, &qblocks, &qshift,
&freesp);
if (xfs_quota_need_throttle(ip, XFS_DQ_GROUP, alloc_blocks))
xfs_quota_calc_throttle(ip, XFS_DQ_GROUP, &qblocks, &qshift,
&freesp);
if (xfs_quota_need_throttle(ip, XFS_DQ_PROJ, alloc_blocks))
xfs_quota_calc_throttle(ip, XFS_DQ_PROJ, &qblocks, &qshift,
&freesp);
/*
* The final prealloc size is set to the minimum of free space available
* in each of the quotas and the overall filesystem.
*
* The shift throttle value is set to the maximum value as determined by
* the global low free space values and per-quota low free space values.
*/
alloc_blocks = MIN(alloc_blocks, qblocks);
shift = MAX(shift, qshift);
if (shift)
alloc_blocks >>= shift;
/*
* rounddown_pow_of_two() returns an undefined result if we pass in
* alloc_blocks = 0.
*/
if (alloc_blocks)
alloc_blocks = rounddown_pow_of_two(alloc_blocks);
if (alloc_blocks > MAXEXTLEN)
alloc_blocks = MAXEXTLEN;
/*
* If we are still trying to allocate more space than is
* available, squash the prealloc hard. This can happen if we
* have a large file on a small filesystem and the above
* lowspace thresholds are smaller than MAXEXTLEN.
*/
while (alloc_blocks && alloc_blocks >= freesp)
alloc_blocks >>= 4;
check_writeio:
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
if (alloc_blocks < mp->m_writeio_blocks)
alloc_blocks = mp->m_writeio_blocks;
trace_xfs_iomap_prealloc_size(ip, alloc_blocks, shift,
mp->m_writeio_blocks);
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
return alloc_blocks;
}
static int
xfs_file_iomap_begin_delay(
struct inode *inode,
loff_t offset,
loff_t count,
unsigned flags,
struct iomap *iomap)
{
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
struct xfs_ifork *ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
xfs_fileoff_t offset_fsb = XFS_B_TO_FSBT(mp, offset);
xfs_fileoff_t maxbytes_fsb =
XFS_B_TO_FSB(mp, mp->m_super->s_maxbytes);
xfs_fileoff_t end_fsb, orig_end_fsb;
int error = 0, eof = 0;
struct xfs_bmbt_irec got;
struct xfs_bmbt_irec prev;
xfs_extnum_t idx;
ASSERT(!XFS_IS_REALTIME_INODE(ip));
ASSERT(!xfs_get_extsz_hint(ip));
xfs_ilock(ip, XFS_ILOCK_EXCL);
if (unlikely(XFS_TEST_ERROR(
(XFS_IFORK_FORMAT(ip, XFS_DATA_FORK) != XFS_DINODE_FMT_EXTENTS &&
XFS_IFORK_FORMAT(ip, XFS_DATA_FORK) != XFS_DINODE_FMT_BTREE),
mp, XFS_ERRTAG_BMAPIFORMAT, XFS_RANDOM_BMAPIFORMAT))) {
XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, mp);
error = -EFSCORRUPTED;
goto out_unlock;
}
xfs: limit speculative prealloc size on sparse files Speculative preallocation based on the current file size works well for contiguous files, but is sub-optimal for sparse files where the EOF preallocation can fill holes and result in large amounts of zeros being written when it is not necessary. The algorithm is modified to prevent EOF speculative preallocation from triggering larger allocations on IO patterns of truncate--to-zero-seek-write-seek-write-.... which results in non-sparse files for large files. This, unfortunately, is the way cp now behaves when copying sparse files and so needs to be fixed. What this code does is that it looks at the existing extent adjacent to the current EOF and if it determines that it is a hole we disable speculative preallocation altogether. To avoid the next write from doing a large prealloc, it takes the size of subsequent preallocations from the current size of the existing EOF extent. IOWs, if you leave a hole in the file, it resets preallocation behaviour to the same as if it was a zero size file. Example new behaviour: $ xfs_io -f -c "pwrite 0 31m" \ -c "pwrite 33m 1m" \ -c "pwrite 128m 1m" \ -c "fiemap -v" /mnt/scratch/blah wrote 32505856/32505856 bytes at offset 0 31 MiB, 7936 ops; 0.0000 sec (1.608 GiB/sec and 421432.7439 ops/sec) wrote 1048576/1048576 bytes at offset 34603008 1 MiB, 256 ops; 0.0000 sec (1.462 GiB/sec and 383233.5329 ops/sec) wrote 1048576/1048576 bytes at offset 134217728 1 MiB, 256 ops; 0.0000 sec (1.719 GiB/sec and 450704.2254 ops/sec) /mnt/scratch/blah: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..65535]: 96..65631 65536 0x0 1: [65536..67583]: hole 2048 2: [67584..69631]: 67680..69727 2048 0x0 3: [69632..262143]: hole 192512 4: [262144..264191]: 262240..264287 2048 0x1 Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-02-11 05:05:01 +00:00
XFS_STATS_INC(mp, xs_blk_mapw);
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
if (!(ifp->if_flags & XFS_IFEXTENTS)) {
error = xfs_iread_extents(NULL, ip, XFS_DATA_FORK);
if (error)
goto out_unlock;
}
xfs_bmap_search_extents(ip, offset_fsb, XFS_DATA_FORK, &eof, &idx,
&got, &prev);
if (!eof && got.br_startoff <= offset_fsb) {
trace_xfs_iomap_found(ip, offset, count, 0, &got);
goto done;
}
error = xfs_qm_dqattach_locked(ip, 0);
if (error)
goto out_unlock;
/*
* We cap the maximum length we map here to MAX_WRITEBACK_PAGES pages
* to keep the chunks of work done where somewhat symmetric with the
* work writeback does. This is a completely arbitrary number pulled
* out of thin air as a best guess for initial testing.
*
* Note that the values needs to be less than 32-bits wide until
* the lower level functions are updated.
*/
count = min_t(loff_t, count, 1024 * PAGE_SIZE);
end_fsb = orig_end_fsb =
min(XFS_B_TO_FSB(mp, offset + count), maxbytes_fsb);
if (eof) {
xfs_fsblock_t prealloc_blocks;
prealloc_blocks =
xfs_iomap_prealloc_size(ip, offset, count, idx, &prev);
if (prealloc_blocks) {
xfs_extlen_t align;
xfs_off_t end_offset;
end_offset = XFS_WRITEIO_ALIGN(mp, offset + count - 1);
end_fsb = XFS_B_TO_FSBT(mp, end_offset) +
prealloc_blocks;
align = xfs_eof_alignment(ip, 0);
if (align)
end_fsb = roundup_64(end_fsb, align);
end_fsb = min(end_fsb, maxbytes_fsb);
ASSERT(end_fsb > offset_fsb);
}
}
retry:
error = xfs_bmapi_reserve_delalloc(ip, XFS_DATA_FORK, offset_fsb,
end_fsb - offset_fsb, &got,
&prev, &idx, eof);
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
switch (error) {
case 0:
break;
case -ENOSPC:
case -EDQUOT:
/* retry without any preallocation */
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:14:59 +00:00
trace_xfs_delalloc_enospc(ip, offset, count);
if (end_fsb != orig_end_fsb) {
end_fsb = orig_end_fsb;
xfs: xfs_sync_data is redundant. We don't do any data writeback from XFS any more - the VFS is completely responsible for that, including for freeze. We can replace the remaining caller with a VFS level function that achieves the same thing, but without conflicting with current writeback work. This means we can remove the flush_work and xfs_flush_inodes() - the VFS functionality completely replaces the internal flush queue for doing this writeback work in a separate context to avoid stack overruns. This does have one complication - it cannot be called with page locks held. Hence move the flushing of delalloc space when ENOSPC occurs back up into xfs_file_aio_buffered_write when we don't hold any locks that will stall writeback. Unfortunately, writeback_inodes_sb_if_idle() is not sufficient to trigger delalloc conversion fast enough to prevent spurious ENOSPC whent here are hundreds of writers, thousands of small files and GBs of free RAM. Hence we need to use sync_sb_inodes() to block callers while we wait for writeback like the previous xfs_flush_inodes implementation did. That means we have to hold the s_umount lock here, but because this call can nest inside i_mutex (the parent directory in the create case, held by the VFS), we have to use down_read_trylock() to avoid potential deadlocks. In practice, this trylock will succeed on almost every attempt as unmount/remount type operations are exceedingly rare. Note: we always need to pass a count of zero to generic_file_buffered_write() as the previously written byte count. We only do this by accident before this patch by the virtue of ret always being zero when there are no errors. Make this explicit rather than needing to specifically zero ret in the ENOSPC retry case. Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 10:56:04 +00:00
goto retry;
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
}
/*FALLTHRU*/
default:
goto out_unlock;
}
/*
* Tag the inode as speculatively preallocated so we can reclaim this
* space on demand, if necessary.
*/
if (end_fsb != orig_end_fsb)
xfs_inode_set_eofblocks_tag(ip);
trace_xfs_iomap_alloc(ip, offset, count, 0, &got);
done:
if (isnullstartblock(got.br_startblock))
got.br_startblock = DELAYSTARTBLOCK;
if (!got.br_startblock) {
error = xfs_alert_fsblock_zero(ip, &got);
if (error)
goto out_unlock;
}
xfs_bmbt_to_iomap(ip, iomap, &got);
out_unlock:
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return error;
}
/*
* Pass in a delayed allocate extent, convert it to real extents;
* return to the caller the extent we create which maps on top of
* the originating callers request.
*
* Called without a lock on the inode.
*
* We no longer bother to look at the incoming map - all we have to
* guarantee is that whatever we allocate fills the required range.
*/
int
xfs_iomap_write_allocate(
xfs_inode_t *ip,
int whichfork,
xfs_off_t offset,
xfs_bmbt_irec_t *imap)
{
xfs_mount_t *mp = ip->i_mount;
xfs_fileoff_t offset_fsb, last_block;
xfs_fileoff_t end_fsb, map_start_fsb;
xfs_fsblock_t first_block;
struct xfs_defer_ops dfops;
xfs_filblks_t count_fsb;
xfs_trans_t *tp;
int nimaps;
int error = 0;
int flags = 0;
int nres;
if (whichfork == XFS_COW_FORK)
flags |= XFS_BMAPI_COWFORK;
/*
* Make sure that the dquots are there.
*/
error = xfs_qm_dqattach(ip, 0);
if (error)
return error;
offset_fsb = XFS_B_TO_FSBT(mp, offset);
count_fsb = imap->br_blockcount;
map_start_fsb = imap->br_startoff;
XFS_STATS_ADD(mp, xs_xstrat_bytes, XFS_FSB_TO_B(mp, count_fsb));
while (count_fsb != 0) {
/*
* Set up a transaction with which to allocate the
* backing store for the file. Do allocations in a
* loop until we get some space in the range we are
* interested in. The other space that might be allocated
* is in the delayed allocation extent on which we sit
* but before our buffer starts.
*/
nimaps = 0;
while (nimaps == 0) {
nres = XFS_EXTENTADD_SPACE_RES(mp, XFS_DATA_FORK);
/*
* We have already reserved space for the extent and any
* indirect blocks when creating the delalloc extent,
* there is no need to reserve space in this transaction
* again.
*/
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_write, 0,
0, XFS_TRANS_RESERVE, &tp);
if (error)
return error;
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, 0);
xfs_defer_init(&dfops, &first_block);
/*
* it is possible that the extents have changed since
* we did the read call as we dropped the ilock for a
* while. We have to be careful about truncates or hole
* punchs here - we are not allowed to allocate
* non-delalloc blocks here.
*
* The only protection against truncation is the pages
* for the range we are being asked to convert are
* locked and hence a truncate will block on them
* first.
*
* As a result, if we go beyond the range we really
* need and hit an delalloc extent boundary followed by
* a hole while we have excess blocks in the map, we
* will fill the hole incorrectly and overrun the
* transaction reservation.
*
* Using a single map prevents this as we are forced to
* check each map we look for overlap with the desired
* range and abort as soon as we find it. Also, given
* that we only return a single map, having one beyond
* what we can return is probably a bit silly.
*
* We also need to check that we don't go beyond EOF;
* this is a truncate optimisation as a truncate sets
* the new file size before block on the pages we
* currently have locked under writeback. Because they
* are about to be tossed, we don't need to write them
* back....
*/
nimaps = 1;
end_fsb = XFS_B_TO_FSB(mp, XFS_ISIZE(ip));
error = xfs_bmap_last_offset(ip, &last_block,
XFS_DATA_FORK);
if (error)
goto trans_cancel;
last_block = XFS_FILEOFF_MAX(last_block, end_fsb);
if ((map_start_fsb + count_fsb) > last_block) {
count_fsb = last_block - map_start_fsb;
if (count_fsb == 0) {
error = -EAGAIN;
goto trans_cancel;
}
}
/*
* From this point onwards we overwrite the imap
* pointer that the caller gave to us.
*/
error = xfs_bmapi_write(tp, ip, map_start_fsb,
count_fsb, flags, &first_block,
xfs: pass total block res. as total xfs_bmapi_write() parameter The total field from struct xfs_alloc_arg is a bit of an unknown commodity. It is documented as the total block requirement for the transaction and is used in this manner from most call sites by virtue of passing the total block reservation of the transaction associated with an allocation. Several xfs_bmapi_write() callers pass hardcoded values of 0 or 1 for the total block requirement, which is a historical oddity without any clear reasoning. The xfs_iomap_write_direct() caller, for example, passes 0 for the total block requirement. This has been determined to cause problems in the form of ABBA deadlocks of AGF buffers due to incorrect AG selection in the block allocator. Specifically, the xfs_alloc_space_available() function incorrectly selects an AG that doesn't actually have sufficient space for the allocation. This occurs because the args.total field is 0 and thus the remaining free space check on the AG doesn't actually consider the size of the allocation request. This locks the AGF buffer, the allocation attempt proceeds and ultimately fails (in xfs_alloc_fix_minleft()), and xfs_alloc_vexent() moves on to the next AG. In turn, this can lead to incorrect AG locking order (if the allocator wraps around, attempting to lock AG 0 after acquiring AG N) and thus deadlock if racing with another operation. This problem has been reproduced via generic/299 on smallish (1GB) ramdisk test devices. To avoid this problem, replace the undocumented hardcoded total parameters from the iomap and utility callers to pass the block reservation used for the associated transaction. This is consistent with other xfs_bmapi_write() callers throughout XFS. The assumption is that the total field allows the selection of an AG that can handle the entire operation rather than simply the allocation/range being requested (e.g., resulting btree splits, etc.). This addresses the aforementioned generic/299 hang by ensuring AG selection only occurs when the allocation can be satisfied by the AG. Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 05:04:13 +00:00
nres, imap, &nimaps,
&dfops);
if (error)
goto trans_cancel;
error = xfs_defer_finish(&tp, &dfops, NULL);
if (error)
goto trans_cancel;
error = xfs_trans_commit(tp);
if (error)
goto error0;
xfs_iunlock(ip, XFS_ILOCK_EXCL);
}
/*
* See if we were able to allocate an extent that
* covers at least part of the callers request
*/
if (!(imap->br_startblock || XFS_IS_REALTIME_INODE(ip)))
return xfs_alert_fsblock_zero(ip, imap);
if ((offset_fsb >= imap->br_startoff) &&
(offset_fsb < (imap->br_startoff +
imap->br_blockcount))) {
XFS_STATS_INC(mp, xs_xstrat_quick);
return 0;
}
/*
* So far we have not mapped the requested part of the
* file, just surrounding data, try again.
*/
count_fsb -= imap->br_blockcount;
map_start_fsb = imap->br_startoff + imap->br_blockcount;
}
trans_cancel:
xfs_defer_cancel(&dfops);
xfs_trans_cancel(tp);
error0:
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return error;
}
int
xfs_iomap_write_unwritten(
xfs_inode_t *ip,
xfs_off_t offset,
xfs_off_t count)
{
xfs_mount_t *mp = ip->i_mount;
xfs_fileoff_t offset_fsb;
xfs_filblks_t count_fsb;
xfs_filblks_t numblks_fsb;
xfs_fsblock_t firstfsb;
int nimaps;
xfs_trans_t *tp;
xfs_bmbt_irec_t imap;
struct xfs_defer_ops dfops;
xfs_fsize_t i_size;
uint resblks;
int error;
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:14:59 +00:00
trace_xfs_unwritten_convert(ip, offset, count);
offset_fsb = XFS_B_TO_FSBT(mp, offset);
count_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + count);
count_fsb = (xfs_filblks_t)(count_fsb - offset_fsb);
/*
* Reserve enough blocks in this transaction for two complete extent
* btree splits. We may be converting the middle part of an unwritten
* extent and in this case we will insert two new extents in the btree
* each of which could cause a full split.
*
* This reservation amount will be used in the first call to
* xfs_bmbt_split() to select an AG with enough space to satisfy the
* rest of the operation.
*/
resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0) << 1;
do {
/*
* Set up a transaction to convert the range of extents
* from unwritten to real. Do allocations in a loop until
* we have covered the range passed in.
*
* Note that we can't risk to recursing back into the filesystem
* here as we might be asked to write out the same inode that we
* complete here and might deadlock on the iolock.
*/
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_write, resblks, 0,
XFS_TRANS_RESERVE | XFS_TRANS_NOFS, &tp);
if (error)
return error;
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, 0);
/*
* Modify the unwritten extent state of the buffer.
*/
xfs_defer_init(&dfops, &firstfsb);
nimaps = 1;
error = xfs_bmapi_write(tp, ip, offset_fsb, count_fsb,
xfs: pass total block res. as total xfs_bmapi_write() parameter The total field from struct xfs_alloc_arg is a bit of an unknown commodity. It is documented as the total block requirement for the transaction and is used in this manner from most call sites by virtue of passing the total block reservation of the transaction associated with an allocation. Several xfs_bmapi_write() callers pass hardcoded values of 0 or 1 for the total block requirement, which is a historical oddity without any clear reasoning. The xfs_iomap_write_direct() caller, for example, passes 0 for the total block requirement. This has been determined to cause problems in the form of ABBA deadlocks of AGF buffers due to incorrect AG selection in the block allocator. Specifically, the xfs_alloc_space_available() function incorrectly selects an AG that doesn't actually have sufficient space for the allocation. This occurs because the args.total field is 0 and thus the remaining free space check on the AG doesn't actually consider the size of the allocation request. This locks the AGF buffer, the allocation attempt proceeds and ultimately fails (in xfs_alloc_fix_minleft()), and xfs_alloc_vexent() moves on to the next AG. In turn, this can lead to incorrect AG locking order (if the allocator wraps around, attempting to lock AG 0 after acquiring AG N) and thus deadlock if racing with another operation. This problem has been reproduced via generic/299 on smallish (1GB) ramdisk test devices. To avoid this problem, replace the undocumented hardcoded total parameters from the iomap and utility callers to pass the block reservation used for the associated transaction. This is consistent with other xfs_bmapi_write() callers throughout XFS. The assumption is that the total field allows the selection of an AG that can handle the entire operation rather than simply the allocation/range being requested (e.g., resulting btree splits, etc.). This addresses the aforementioned generic/299 hang by ensuring AG selection only occurs when the allocation can be satisfied by the AG. Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 05:04:13 +00:00
XFS_BMAPI_CONVERT, &firstfsb, resblks,
&imap, &nimaps, &dfops);
if (error)
goto error_on_bmapi_transaction;
/*
* Log the updated inode size as we go. We have to be careful
* to only log it up to the actual write offset if it is
* halfway into a block.
*/
i_size = XFS_FSB_TO_B(mp, offset_fsb + count_fsb);
if (i_size > offset + count)
i_size = offset + count;
i_size = xfs_new_eof(ip, i_size);
if (i_size) {
ip->i_d.di_size = i_size;
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
}
error = xfs_defer_finish(&tp, &dfops, NULL);
if (error)
goto error_on_bmapi_transaction;
error = xfs_trans_commit(tp);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
if (error)
return error;
if (!(imap.br_startblock || XFS_IS_REALTIME_INODE(ip)))
return xfs_alert_fsblock_zero(ip, &imap);
if ((numblks_fsb = imap.br_blockcount) == 0) {
/*
* The numblks_fsb value should always get
* smaller, otherwise the loop is stuck.
*/
ASSERT(imap.br_blockcount);
break;
}
offset_fsb += numblks_fsb;
count_fsb -= numblks_fsb;
} while (count_fsb > 0);
return 0;
error_on_bmapi_transaction:
xfs_defer_cancel(&dfops);
xfs_trans_cancel(tp);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return error;
}
static inline bool imap_needs_alloc(struct inode *inode,
struct xfs_bmbt_irec *imap, int nimaps)
{
return !nimaps ||
imap->br_startblock == HOLESTARTBLOCK ||
imap->br_startblock == DELAYSTARTBLOCK ||
(IS_DAX(inode) && ISUNWRITTEN(imap));
}
static int
xfs_file_iomap_begin(
struct inode *inode,
loff_t offset,
loff_t length,
unsigned flags,
struct iomap *iomap)
{
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
struct xfs_bmbt_irec imap;
xfs_fileoff_t offset_fsb, end_fsb;
bool shared, trimmed;
int nimaps = 1, error = 0;
unsigned lockmode;
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
if ((flags & (IOMAP_WRITE | IOMAP_ZERO)) && xfs_is_reflink_inode(ip)) {
error = xfs_reflink_reserve_cow_range(ip, offset, length);
if (error < 0)
return error;
}
if ((flags & IOMAP_WRITE) && !IS_DAX(inode) &&
!xfs_get_extsz_hint(ip)) {
/* Reserve delalloc blocks for regular writeback. */
return xfs_file_iomap_begin_delay(inode, offset, length, flags,
iomap);
}
lockmode = xfs_ilock_data_map_shared(ip);
ASSERT(offset <= mp->m_super->s_maxbytes);
if ((xfs_fsize_t)offset + length > mp->m_super->s_maxbytes)
length = mp->m_super->s_maxbytes - offset;
offset_fsb = XFS_B_TO_FSBT(mp, offset);
end_fsb = XFS_B_TO_FSB(mp, offset + length);
error = xfs_bmapi_read(ip, offset_fsb, end_fsb - offset_fsb, &imap,
&nimaps, 0);
if (error) {
xfs_iunlock(ip, lockmode);
return error;
}
if (flags & (IOMAP_WRITE | IOMAP_ZERO | IOMAP_REPORT)) {
/* Trim the mapping to the nearest shared extent boundary. */
error = xfs_reflink_trim_around_shared(ip, &imap, &shared,
&trimmed);
if (error) {
xfs_iunlock(ip, lockmode);
return error;
}
}
if ((flags & IOMAP_WRITE) && imap_needs_alloc(inode, &imap, nimaps)) {
/*
* We cap the maximum length we map here to MAX_WRITEBACK_PAGES
* pages to keep the chunks of work done where somewhat symmetric
* with the work writeback does. This is a completely arbitrary
* number pulled out of thin air as a best guess for initial
* testing.
*
* Note that the values needs to be less than 32-bits wide until
* the lower level functions are updated.
*/
length = min_t(loff_t, length, 1024 * PAGE_SIZE);
/*
* xfs_iomap_write_direct() expects the shared lock. It
* is unlocked on return.
*/
if (lockmode == XFS_ILOCK_EXCL)
xfs_ilock_demote(ip, lockmode);
error = xfs_iomap_write_direct(ip, offset, length, &imap,
nimaps);
if (error)
return error;
iomap->flags = IOMAP_F_NEW;
trace_xfs_iomap_alloc(ip, offset, length, 0, &imap);
} else {
ASSERT(nimaps);
xfs_iunlock(ip, lockmode);
trace_xfs_iomap_found(ip, offset, length, 0, &imap);
}
xfs_bmbt_to_iomap(ip, iomap, &imap);
if (shared)
iomap->flags |= IOMAP_F_SHARED;
return 0;
}
static int
xfs_file_iomap_end_delalloc(
struct xfs_inode *ip,
loff_t offset,
loff_t length,
ssize_t written)
{
struct xfs_mount *mp = ip->i_mount;
xfs_fileoff_t start_fsb;
xfs_fileoff_t end_fsb;
int error = 0;
start_fsb = XFS_B_TO_FSB(mp, offset + written);
end_fsb = XFS_B_TO_FSB(mp, offset + length);
/*
* Trim back delalloc blocks if we didn't manage to write the whole
* range reserved.
*
* We don't need to care about racing delalloc as we hold i_mutex
* across the reserve/allocate/unreserve calls. If there are delalloc
* blocks in the range, they are ours.
*/
if (start_fsb < end_fsb) {
xfs_ilock(ip, XFS_ILOCK_EXCL);
error = xfs_bmap_punch_delalloc_range(ip, start_fsb,
end_fsb - start_fsb);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
if (error && !XFS_FORCED_SHUTDOWN(mp)) {
xfs_alert(mp, "%s: unable to clean up ino %lld",
__func__, ip->i_ino);
return error;
}
}
return 0;
}
static int
xfs_file_iomap_end(
struct inode *inode,
loff_t offset,
loff_t length,
ssize_t written,
unsigned flags,
struct iomap *iomap)
{
if ((flags & IOMAP_WRITE) && iomap->type == IOMAP_DELALLOC)
return xfs_file_iomap_end_delalloc(XFS_I(inode), offset,
length, written);
return 0;
}
struct iomap_ops xfs_iomap_ops = {
.iomap_begin = xfs_file_iomap_begin,
.iomap_end = xfs_file_iomap_end,
};
static int
xfs_xattr_iomap_begin(
struct inode *inode,
loff_t offset,
loff_t length,
unsigned flags,
struct iomap *iomap)
{
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
xfs_fileoff_t offset_fsb = XFS_B_TO_FSBT(mp, offset);
xfs_fileoff_t end_fsb = XFS_B_TO_FSB(mp, offset + length);
struct xfs_bmbt_irec imap;
int nimaps = 1, error = 0;
unsigned lockmode;
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
lockmode = xfs_ilock_data_map_shared(ip);
/* if there are no attribute fork or extents, return ENOENT */
if (XFS_IFORK_Q(ip) || !ip->i_d.di_anextents) {
error = -ENOENT;
goto out_unlock;
}
ASSERT(ip->i_d.di_aformat != XFS_DINODE_FMT_LOCAL);
error = xfs_bmapi_read(ip, offset_fsb, end_fsb - offset_fsb, &imap,
&nimaps, XFS_BMAPI_ENTIRE | XFS_BMAPI_ATTRFORK);
out_unlock:
xfs_iunlock(ip, lockmode);
if (!error) {
ASSERT(nimaps);
xfs_bmbt_to_iomap(ip, iomap, &imap);
}
return error;
}
struct iomap_ops xfs_xattr_iomap_ops = {
.iomap_begin = xfs_xattr_iomap_begin,
};