linux/drivers/ide/q40ide.c

166 lines
4.0 KiB
C
Raw Normal View History

/*
* Q40 I/O port IDE Driver
*
* (c) Richard Zidlicky
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
*
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/ide.h>
/*
* Bases of the IDE interfaces
*/
#define Q40IDE_NUM_HWIFS 2
#define PCIDE_BASE1 0x1f0
#define PCIDE_BASE2 0x170
#define PCIDE_BASE3 0x1e8
#define PCIDE_BASE4 0x168
#define PCIDE_BASE5 0x1e0
#define PCIDE_BASE6 0x160
static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = {
PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4 , PCIDE_BASE5,
PCIDE_BASE6 */
};
static int q40ide_default_irq(unsigned long base)
{
switch (base) {
case 0x1f0: return 14;
case 0x170: return 15;
case 0x1e8: return 11;
default:
return 0;
}
}
/*
* Addresses are pretranslated for Q40 ISA access.
*/
static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
ide_ack_intr_t *ack_intr,
int irq)
{
memset(hw, 0, sizeof(hw_regs_t));
/* BIG FAT WARNING:
assumption: only DATA port is ever used in 16 bit mode */
hw->io_ports.data_addr = Q40_ISA_IO_W(base);
hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1);
hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2);
hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3);
hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4);
hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5);
hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6);
hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7);
hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
hw->irq = irq;
hw->ack_intr = ack_intr;
hw->chipset = ide_generic;
}
static void q40ide_input_data(ide_drive_t *drive, struct request *rq,
void *buf, unsigned int len)
{
unsigned long data_addr = drive->hwif->io_ports.data_addr;
if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
return insw(data_addr, buf, (len + 1) / 2);
raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
static void q40ide_output_data(ide_drive_t *drive, struct request *rq,
void *buf, unsigned int len)
{
unsigned long data_addr = drive->hwif->io_ports.data_addr;
if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
return outsw(data_addr, buf, (len + 1) / 2);
raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
/* Q40 has a byte-swapped IDE interface */
static const struct ide_tp_ops q40ide_tp_ops = {
.exec_command = ide_exec_command,
.read_status = ide_read_status,
.read_altstatus = ide_read_altstatus,
.set_irq = ide_set_irq,
.tf_load = ide_tf_load,
.tf_read = ide_tf_read,
.input_data = q40ide_input_data,
.output_data = q40ide_output_data,
};
static const struct ide_port_info q40ide_port_info = {
.tp_ops = &q40ide_tp_ops,
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
.irq_flags = IRQF_SHARED,
};
/*
* the static array is needed to have the name reported in /proc/ioports,
* hwif->name unfortunately isn't available yet
*/
static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
"ide0", "ide1"
};
/*
* Probe for Q40 IDE interfaces
*/
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 19:13:07 +00:00
static int __init q40ide_init(void)
{
int i;
hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
if (!MACH_IS_Q40)
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 19:13:07 +00:00
return -ENODEV;
printk(KERN_INFO "ide: Q40 IDE controller\n");
for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
const char *name = q40_ide_names[i];
if (!request_region(pcide_bases[i], 8, name)) {
printk("could not reserve ports %lx-%lx for %s\n",
pcide_bases[i],pcide_bases[i]+8,name);
continue;
}
if (!request_region(pcide_bases[i]+0x206, 1, name)) {
printk("could not reserve port %lx for %s\n",
pcide_bases[i]+0x206,name);
release_region(pcide_bases[i], 8);
continue;
}
q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL,
q40ide_default_irq(pcide_bases[i]));
hws[i] = &hw[i];
}
return ide_host_add(&q40ide_port_info, hws, NULL);
}
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 19:13:07 +00:00
module_init(q40ide_init);
MODULE_LICENSE("GPL");