linux/fs/btrfs/bio.c

849 lines
24 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2007 Oracle. All rights reserved.
* Copyright (C) 2022 Christoph Hellwig.
*/
#include <linux/bio.h>
#include "bio.h"
#include "ctree.h"
#include "volumes.h"
#include "raid56.h"
#include "async-thread.h"
#include "check-integrity.h"
#include "dev-replace.h"
#include "rcu-string.h"
#include "zoned.h"
#include "file-item.h"
static struct bio_set btrfs_bioset;
static struct bio_set btrfs_clone_bioset;
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
static struct bio_set btrfs_repair_bioset;
static mempool_t btrfs_failed_bio_pool;
struct btrfs_failed_bio {
struct btrfs_bio *bbio;
int num_copies;
atomic_t repair_count;
};
/*
* Initialize a btrfs_bio structure. This skips the embedded bio itself as it
* is already initialized by the block layer.
*/
void btrfs_bio_init(struct btrfs_bio *bbio, struct btrfs_fs_info *fs_info,
btrfs_bio_end_io_t end_io, void *private)
{
memset(bbio, 0, offsetof(struct btrfs_bio, bio));
bbio->fs_info = fs_info;
bbio->end_io = end_io;
bbio->private = private;
atomic_set(&bbio->pending_ios, 1);
}
/*
* Allocate a btrfs_bio structure. The btrfs_bio is the main I/O container for
* btrfs, and is used for all I/O submitted through btrfs_submit_bio.
*
* Just like the underlying bio_alloc_bioset it will not fail as it is backed by
* a mempool.
*/
struct btrfs_bio *btrfs_bio_alloc(unsigned int nr_vecs, blk_opf_t opf,
struct btrfs_fs_info *fs_info,
btrfs_bio_end_io_t end_io, void *private)
{
struct btrfs_bio *bbio;
struct bio *bio;
bio = bio_alloc_bioset(NULL, nr_vecs, opf, GFP_NOFS, &btrfs_bioset);
bbio = btrfs_bio(bio);
btrfs_bio_init(bbio, fs_info, end_io, private);
return bbio;
}
static blk_status_t btrfs_bio_extract_ordered_extent(struct btrfs_bio *bbio)
{
struct btrfs_ordered_extent *ordered;
int ret;
ordered = btrfs_lookup_ordered_extent(bbio->inode, bbio->file_offset);
if (WARN_ON_ONCE(!ordered))
return BLK_STS_IOERR;
ret = btrfs_extract_ordered_extent(bbio, ordered);
btrfs_put_ordered_extent(ordered);
return errno_to_blk_status(ret);
}
static struct btrfs_bio *btrfs_split_bio(struct btrfs_fs_info *fs_info,
struct btrfs_bio *orig_bbio,
u64 map_length, bool use_append)
{
struct btrfs_bio *bbio;
struct bio *bio;
if (use_append) {
unsigned int nr_segs;
bio = bio_split_rw(&orig_bbio->bio, &fs_info->limits, &nr_segs,
&btrfs_clone_bioset, map_length);
} else {
bio = bio_split(&orig_bbio->bio, map_length >> SECTOR_SHIFT,
GFP_NOFS, &btrfs_clone_bioset);
}
bbio = btrfs_bio(bio);
btrfs_bio_init(bbio, fs_info, NULL, orig_bbio);
bbio->inode = orig_bbio->inode;
bbio->file_offset = orig_bbio->file_offset;
if (!(orig_bbio->bio.bi_opf & REQ_BTRFS_ONE_ORDERED))
orig_bbio->file_offset += map_length;
atomic_inc(&orig_bbio->pending_ios);
return bbio;
}
static void btrfs_orig_write_end_io(struct bio *bio);
static void btrfs_bbio_propagate_error(struct btrfs_bio *bbio,
struct btrfs_bio *orig_bbio)
{
/*
* For writes we tolerate nr_mirrors - 1 write failures, so we can't
* just blindly propagate a write failure here. Instead increment the
* error count in the original I/O context so that it is guaranteed to
* be larger than the error tolerance.
*/
if (bbio->bio.bi_end_io == &btrfs_orig_write_end_io) {
struct btrfs_io_stripe *orig_stripe = orig_bbio->bio.bi_private;
struct btrfs_io_context *orig_bioc = orig_stripe->bioc;
atomic_add(orig_bioc->max_errors, &orig_bioc->error);
} else {
orig_bbio->bio.bi_status = bbio->bio.bi_status;
}
}
static void btrfs_orig_bbio_end_io(struct btrfs_bio *bbio)
{
if (bbio->bio.bi_pool == &btrfs_clone_bioset) {
struct btrfs_bio *orig_bbio = bbio->private;
if (bbio->bio.bi_status)
btrfs_bbio_propagate_error(bbio, orig_bbio);
bio_put(&bbio->bio);
bbio = orig_bbio;
}
if (atomic_dec_and_test(&bbio->pending_ios))
bbio->end_io(bbio);
}
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
static int next_repair_mirror(struct btrfs_failed_bio *fbio, int cur_mirror)
{
if (cur_mirror == fbio->num_copies)
return cur_mirror + 1 - fbio->num_copies;
return cur_mirror + 1;
}
static int prev_repair_mirror(struct btrfs_failed_bio *fbio, int cur_mirror)
{
if (cur_mirror == 1)
return fbio->num_copies;
return cur_mirror - 1;
}
static void btrfs_repair_done(struct btrfs_failed_bio *fbio)
{
if (atomic_dec_and_test(&fbio->repair_count)) {
btrfs_orig_bbio_end_io(fbio->bbio);
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
mempool_free(fbio, &btrfs_failed_bio_pool);
}
}
static void btrfs_end_repair_bio(struct btrfs_bio *repair_bbio,
struct btrfs_device *dev)
{
struct btrfs_failed_bio *fbio = repair_bbio->private;
struct btrfs_inode *inode = repair_bbio->inode;
struct btrfs_fs_info *fs_info = inode->root->fs_info;
struct bio_vec *bv = bio_first_bvec_all(&repair_bbio->bio);
int mirror = repair_bbio->mirror_num;
if (repair_bbio->bio.bi_status ||
!btrfs_data_csum_ok(repair_bbio, dev, 0, bv)) {
bio_reset(&repair_bbio->bio, NULL, REQ_OP_READ);
repair_bbio->bio.bi_iter = repair_bbio->saved_iter;
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
mirror = next_repair_mirror(fbio, mirror);
if (mirror == fbio->bbio->mirror_num) {
btrfs_debug(fs_info, "no mirror left");
fbio->bbio->bio.bi_status = BLK_STS_IOERR;
goto done;
}
btrfs_submit_bio(repair_bbio, mirror);
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
return;
}
do {
mirror = prev_repair_mirror(fbio, mirror);
btrfs_repair_io_failure(fs_info, btrfs_ino(inode),
repair_bbio->file_offset, fs_info->sectorsize,
repair_bbio->saved_iter.bi_sector << SECTOR_SHIFT,
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
bv->bv_page, bv->bv_offset, mirror);
} while (mirror != fbio->bbio->mirror_num);
done:
btrfs_repair_done(fbio);
bio_put(&repair_bbio->bio);
}
/*
* Try to kick off a repair read to the next available mirror for a bad sector.
*
* This primarily tries to recover good data to serve the actual read request,
* but also tries to write the good data back to the bad mirror(s) when a
* read succeeded to restore the redundancy.
*/
static struct btrfs_failed_bio *repair_one_sector(struct btrfs_bio *failed_bbio,
u32 bio_offset,
struct bio_vec *bv,
struct btrfs_failed_bio *fbio)
{
struct btrfs_inode *inode = failed_bbio->inode;
struct btrfs_fs_info *fs_info = inode->root->fs_info;
const u32 sectorsize = fs_info->sectorsize;
const u64 logical = (failed_bbio->saved_iter.bi_sector << SECTOR_SHIFT);
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
struct btrfs_bio *repair_bbio;
struct bio *repair_bio;
int num_copies;
int mirror;
btrfs_debug(fs_info, "repair read error: read error at %llu",
failed_bbio->file_offset + bio_offset);
num_copies = btrfs_num_copies(fs_info, logical, sectorsize);
if (num_copies == 1) {
btrfs_debug(fs_info, "no copy to repair from");
failed_bbio->bio.bi_status = BLK_STS_IOERR;
return fbio;
}
if (!fbio) {
fbio = mempool_alloc(&btrfs_failed_bio_pool, GFP_NOFS);
fbio->bbio = failed_bbio;
fbio->num_copies = num_copies;
atomic_set(&fbio->repair_count, 1);
}
atomic_inc(&fbio->repair_count);
repair_bio = bio_alloc_bioset(NULL, 1, REQ_OP_READ, GFP_NOFS,
&btrfs_repair_bioset);
repair_bio->bi_iter.bi_sector = failed_bbio->saved_iter.bi_sector;
__bio_add_page(repair_bio, bv->bv_page, bv->bv_len, bv->bv_offset);
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
repair_bbio = btrfs_bio(repair_bio);
btrfs_bio_init(repair_bbio, fs_info, NULL, fbio);
repair_bbio->inode = failed_bbio->inode;
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
repair_bbio->file_offset = failed_bbio->file_offset + bio_offset;
mirror = next_repair_mirror(fbio, failed_bbio->mirror_num);
btrfs_debug(fs_info, "submitting repair read to mirror %d", mirror);
btrfs_submit_bio(repair_bbio, mirror);
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
return fbio;
}
static void btrfs_check_read_bio(struct btrfs_bio *bbio, struct btrfs_device *dev)
{
struct btrfs_inode *inode = bbio->inode;
struct btrfs_fs_info *fs_info = inode->root->fs_info;
u32 sectorsize = fs_info->sectorsize;
struct bvec_iter *iter = &bbio->saved_iter;
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
blk_status_t status = bbio->bio.bi_status;
struct btrfs_failed_bio *fbio = NULL;
u32 offset = 0;
/* Read-repair requires the inode field to be set by the submitter. */
ASSERT(inode);
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
/*
* Hand off repair bios to the repair code as there is no upper level
* submitter for them.
*/
if (bbio->bio.bi_pool == &btrfs_repair_bioset) {
btrfs_end_repair_bio(bbio, dev);
return;
}
/* Clear the I/O error. A failed repair will reset it. */
bbio->bio.bi_status = BLK_STS_OK;
while (iter->bi_size) {
struct bio_vec bv = bio_iter_iovec(&bbio->bio, *iter);
bv.bv_len = min(bv.bv_len, sectorsize);
if (status || !btrfs_data_csum_ok(bbio, dev, offset, &bv))
fbio = repair_one_sector(bbio, offset, &bv, fbio);
bio_advance_iter_single(&bbio->bio, iter, sectorsize);
offset += sectorsize;
}
if (bbio->csum != bbio->csum_inline)
kfree(bbio->csum);
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
if (fbio)
btrfs_repair_done(fbio);
else
btrfs_orig_bbio_end_io(bbio);
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
}
static void btrfs_log_dev_io_error(struct bio *bio, struct btrfs_device *dev)
{
if (!dev || !dev->bdev)
return;
if (bio->bi_status != BLK_STS_IOERR && bio->bi_status != BLK_STS_TARGET)
return;
if (btrfs_op(bio) == BTRFS_MAP_WRITE)
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS);
else if (!(bio->bi_opf & REQ_RAHEAD))
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_READ_ERRS);
if (bio->bi_opf & REQ_PREFLUSH)
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_FLUSH_ERRS);
}
static struct workqueue_struct *btrfs_end_io_wq(struct btrfs_fs_info *fs_info,
struct bio *bio)
{
if (bio->bi_opf & REQ_META)
return fs_info->endio_meta_workers;
return fs_info->endio_workers;
}
static void btrfs_end_bio_work(struct work_struct *work)
{
struct btrfs_bio *bbio = container_of(work, struct btrfs_bio, end_io_work);
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
/* Metadata reads are checked and repaired by the submitter. */
if (bbio->inode && !(bbio->bio.bi_opf & REQ_META))
btrfs_check_read_bio(bbio, bbio->bio.bi_private);
else
btrfs_orig_bbio_end_io(bbio);
}
static void btrfs_simple_end_io(struct bio *bio)
{
struct btrfs_bio *bbio = btrfs_bio(bio);
struct btrfs_device *dev = bio->bi_private;
struct btrfs_fs_info *fs_info = bbio->fs_info;
btrfs_bio_counter_dec(fs_info);
if (bio->bi_status)
btrfs_log_dev_io_error(bio, dev);
if (bio_op(bio) == REQ_OP_READ) {
INIT_WORK(&bbio->end_io_work, btrfs_end_bio_work);
queue_work(btrfs_end_io_wq(fs_info, bio), &bbio->end_io_work);
} else {
if (bio_op(bio) == REQ_OP_ZONE_APPEND && !bio->bi_status)
btrfs_record_physical_zoned(bbio);
btrfs_orig_bbio_end_io(bbio);
}
}
static void btrfs_raid56_end_io(struct bio *bio)
{
struct btrfs_io_context *bioc = bio->bi_private;
struct btrfs_bio *bbio = btrfs_bio(bio);
btrfs_bio_counter_dec(bioc->fs_info);
bbio->mirror_num = bioc->mirror_num;
if (bio_op(bio) == REQ_OP_READ && bbio->inode &&
!(bbio->bio.bi_opf & REQ_META))
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
btrfs_check_read_bio(bbio, NULL);
else
btrfs_orig_bbio_end_io(bbio);
btrfs_put_bioc(bioc);
}
static void btrfs_orig_write_end_io(struct bio *bio)
{
struct btrfs_io_stripe *stripe = bio->bi_private;
struct btrfs_io_context *bioc = stripe->bioc;
struct btrfs_bio *bbio = btrfs_bio(bio);
btrfs_bio_counter_dec(bioc->fs_info);
if (bio->bi_status) {
atomic_inc(&bioc->error);
btrfs_log_dev_io_error(bio, stripe->dev);
}
/*
* Only send an error to the higher layers if it is beyond the tolerance
* threshold.
*/
if (atomic_read(&bioc->error) > bioc->max_errors)
bio->bi_status = BLK_STS_IOERR;
else
bio->bi_status = BLK_STS_OK;
btrfs_orig_bbio_end_io(bbio);
btrfs_put_bioc(bioc);
}
static void btrfs_clone_write_end_io(struct bio *bio)
{
struct btrfs_io_stripe *stripe = bio->bi_private;
if (bio->bi_status) {
atomic_inc(&stripe->bioc->error);
btrfs_log_dev_io_error(bio, stripe->dev);
}
/* Pass on control to the original bio this one was cloned from */
bio_endio(stripe->bioc->orig_bio);
bio_put(bio);
}
static void btrfs_submit_dev_bio(struct btrfs_device *dev, struct bio *bio)
{
if (!dev || !dev->bdev ||
test_bit(BTRFS_DEV_STATE_MISSING, &dev->dev_state) ||
(btrfs_op(bio) == BTRFS_MAP_WRITE &&
!test_bit(BTRFS_DEV_STATE_WRITEABLE, &dev->dev_state))) {
bio_io_error(bio);
return;
}
bio_set_dev(bio, dev->bdev);
/*
* For zone append writing, bi_sector must point the beginning of the
* zone
*/
if (bio_op(bio) == REQ_OP_ZONE_APPEND) {
u64 physical = bio->bi_iter.bi_sector << SECTOR_SHIFT;
u64 zone_start = round_down(physical, dev->fs_info->zone_size);
ASSERT(btrfs_dev_is_sequential(dev, physical));
bio->bi_iter.bi_sector = zone_start >> SECTOR_SHIFT;
}
btrfs_debug_in_rcu(dev->fs_info,
"%s: rw %d 0x%x, sector=%llu, dev=%lu (%s id %llu), size=%u",
__func__, bio_op(bio), bio->bi_opf, bio->bi_iter.bi_sector,
(unsigned long)dev->bdev->bd_dev, btrfs_dev_name(dev),
dev->devid, bio->bi_iter.bi_size);
btrfsic_check_bio(bio);
if (bio->bi_opf & REQ_BTRFS_CGROUP_PUNT)
blkcg_punt_bio_submit(bio);
else
submit_bio(bio);
}
static void btrfs_submit_mirrored_bio(struct btrfs_io_context *bioc, int dev_nr)
{
struct bio *orig_bio = bioc->orig_bio, *bio;
ASSERT(bio_op(orig_bio) != REQ_OP_READ);
/* Reuse the bio embedded into the btrfs_bio for the last mirror */
if (dev_nr == bioc->num_stripes - 1) {
bio = orig_bio;
bio->bi_end_io = btrfs_orig_write_end_io;
} else {
bio = bio_alloc_clone(NULL, orig_bio, GFP_NOFS, &fs_bio_set);
bio_inc_remaining(orig_bio);
bio->bi_end_io = btrfs_clone_write_end_io;
}
bio->bi_private = &bioc->stripes[dev_nr];
bio->bi_iter.bi_sector = bioc->stripes[dev_nr].physical >> SECTOR_SHIFT;
bioc->stripes[dev_nr].bioc = bioc;
btrfs_submit_dev_bio(bioc->stripes[dev_nr].dev, bio);
}
static void __btrfs_submit_bio(struct bio *bio, struct btrfs_io_context *bioc,
struct btrfs_io_stripe *smap, int mirror_num)
{
/* Do not leak our private flag into the block layer. */
bio->bi_opf &= ~REQ_BTRFS_ONE_ORDERED;
if (!bioc) {
/* Single mirror read/write fast path. */
btrfs_bio(bio)->mirror_num = mirror_num;
bio->bi_iter.bi_sector = smap->physical >> SECTOR_SHIFT;
bio->bi_private = smap->dev;
bio->bi_end_io = btrfs_simple_end_io;
btrfs_submit_dev_bio(smap->dev, bio);
} else if (bioc->map_type & BTRFS_BLOCK_GROUP_RAID56_MASK) {
/* Parity RAID write or read recovery. */
bio->bi_private = bioc;
bio->bi_end_io = btrfs_raid56_end_io;
if (bio_op(bio) == REQ_OP_READ)
raid56_parity_recover(bio, bioc, mirror_num);
else
raid56_parity_write(bio, bioc);
} else {
/* Write to multiple mirrors. */
int total_devs = bioc->num_stripes;
bioc->orig_bio = bio;
for (int dev_nr = 0; dev_nr < total_devs; dev_nr++)
btrfs_submit_mirrored_bio(bioc, dev_nr);
}
}
static blk_status_t btrfs_bio_csum(struct btrfs_bio *bbio)
{
if (bbio->bio.bi_opf & REQ_META)
return btree_csum_one_bio(bbio);
return btrfs_csum_one_bio(bbio);
}
/*
* Async submit bios are used to offload expensive checksumming onto the worker
* threads.
*/
struct async_submit_bio {
struct btrfs_bio *bbio;
struct btrfs_io_context *bioc;
struct btrfs_io_stripe smap;
int mirror_num;
struct btrfs_work work;
};
/*
* In order to insert checksums into the metadata in large chunks, we wait
* until bio submission time. All the pages in the bio are checksummed and
* sums are attached onto the ordered extent record.
*
* At IO completion time the csums attached on the ordered extent record are
* inserted into the btree.
*/
static void run_one_async_start(struct btrfs_work *work)
{
struct async_submit_bio *async =
container_of(work, struct async_submit_bio, work);
blk_status_t ret;
ret = btrfs_bio_csum(async->bbio);
if (ret)
async->bbio->bio.bi_status = ret;
}
/*
* In order to insert checksums into the metadata in large chunks, we wait
* until bio submission time. All the pages in the bio are checksummed and
* sums are attached onto the ordered extent record.
*
* At IO completion time the csums attached on the ordered extent record are
* inserted into the tree.
*/
static void run_one_async_done(struct btrfs_work *work)
{
struct async_submit_bio *async =
container_of(work, struct async_submit_bio, work);
struct bio *bio = &async->bbio->bio;
/* If an error occurred we just want to clean up the bio and move on. */
if (bio->bi_status) {
btrfs_orig_bbio_end_io(async->bbio);
return;
}
/*
* All of the bios that pass through here are from async helpers.
* Use REQ_BTRFS_CGROUP_PUNT to issue them from the owning cgroup's
* context. This changes nothing when cgroups aren't in use.
*/
bio->bi_opf |= REQ_BTRFS_CGROUP_PUNT;
__btrfs_submit_bio(bio, async->bioc, &async->smap, async->mirror_num);
}
static void run_one_async_free(struct btrfs_work *work)
{
kfree(container_of(work, struct async_submit_bio, work));
}
static bool should_async_write(struct btrfs_bio *bbio)
{
/* Submit synchronously if the checksum implementation is fast. */
if (test_bit(BTRFS_FS_CSUM_IMPL_FAST, &bbio->fs_info->flags))
return false;
/*
* Try to defer the submission to a workqueue to parallelize the
* checksum calculation unless the I/O is issued synchronously.
*/
if (op_is_sync(bbio->bio.bi_opf))
return false;
/* Zoned devices require I/O to be submitted in order. */
if ((bbio->bio.bi_opf & REQ_META) && btrfs_is_zoned(bbio->fs_info))
return false;
return true;
}
/*
* Submit bio to an async queue.
*
* Return true if the work has been succesfuly submitted, else false.
*/
static bool btrfs_wq_submit_bio(struct btrfs_bio *bbio,
struct btrfs_io_context *bioc,
struct btrfs_io_stripe *smap, int mirror_num)
{
struct btrfs_fs_info *fs_info = bbio->fs_info;
struct async_submit_bio *async;
async = kmalloc(sizeof(*async), GFP_NOFS);
if (!async)
return false;
async->bbio = bbio;
async->bioc = bioc;
async->smap = *smap;
async->mirror_num = mirror_num;
btrfs_init_work(&async->work, run_one_async_start, run_one_async_done,
run_one_async_free);
btrfs_queue_work(fs_info->workers, &async->work);
return true;
}
static bool btrfs_submit_chunk(struct btrfs_bio *bbio, int mirror_num)
{
struct btrfs_inode *inode = bbio->inode;
struct btrfs_fs_info *fs_info = bbio->fs_info;
struct btrfs_bio *orig_bbio = bbio;
struct bio *bio = &bbio->bio;
u64 logical = bio->bi_iter.bi_sector << SECTOR_SHIFT;
u64 length = bio->bi_iter.bi_size;
u64 map_length = length;
bool use_append = btrfs_use_zone_append(bbio);
struct btrfs_io_context *bioc = NULL;
struct btrfs_io_stripe smap;
blk_status_t ret;
int error;
btrfs_bio_counter_inc_blocked(fs_info);
error = __btrfs_map_block(fs_info, btrfs_op(bio), logical, &map_length,
&bioc, &smap, &mirror_num, 1);
if (error) {
ret = errno_to_blk_status(error);
goto fail;
}
map_length = min(map_length, length);
if (use_append)
map_length = min(map_length, fs_info->max_zone_append_size);
if (map_length < length) {
bbio = btrfs_split_bio(fs_info, bbio, map_length, use_append);
bio = &bbio->bio;
}
/*
* Save the iter for the end_io handler and preload the checksums for
* data reads.
*/
if (bio_op(bio) == REQ_OP_READ && inode && !(bio->bi_opf & REQ_META)) {
bbio->saved_iter = bio->bi_iter;
ret = btrfs_lookup_bio_sums(bbio);
if (ret)
goto fail_put_bio;
}
if (btrfs_op(bio) == BTRFS_MAP_WRITE) {
if (use_append) {
bio->bi_opf &= ~REQ_OP_WRITE;
bio->bi_opf |= REQ_OP_ZONE_APPEND;
ret = btrfs_bio_extract_ordered_extent(bbio);
if (ret)
goto fail_put_bio;
}
/*
* Csum items for reloc roots have already been cloned at this
* point, so they are handled as part of the no-checksum case.
*/
if (inode && !(inode->flags & BTRFS_INODE_NODATASUM) &&
!test_bit(BTRFS_FS_STATE_NO_CSUMS, &fs_info->fs_state) &&
!btrfs_is_data_reloc_root(inode->root)) {
if (should_async_write(bbio) &&
btrfs_wq_submit_bio(bbio, bioc, &smap, mirror_num))
goto done;
ret = btrfs_bio_csum(bbio);
if (ret)
goto fail_put_bio;
}
}
__btrfs_submit_bio(bio, bioc, &smap, mirror_num);
done:
return map_length == length;
fail_put_bio:
if (map_length < length)
bio_put(bio);
fail:
btrfs_bio_counter_dec(fs_info);
btrfs_bio_end_io(orig_bbio, ret);
/* Do not submit another chunk */
return true;
}
void btrfs_submit_bio(struct btrfs_bio *bbio, int mirror_num)
{
/* If bbio->inode is not populated, its file_offset must be 0. */
ASSERT(bbio->inode || bbio->file_offset == 0);
while (!btrfs_submit_chunk(bbio, mirror_num))
;
}
/*
* Submit a repair write.
*
* This bypasses btrfs_submit_bio deliberately, as that writes all copies in a
* RAID setup. Here we only want to write the one bad copy, so we do the
* mapping ourselves and submit the bio directly.
*
* The I/O is issued synchronously to block the repair read completion from
* freeing the bio.
*/
int btrfs_repair_io_failure(struct btrfs_fs_info *fs_info, u64 ino, u64 start,
u64 length, u64 logical, struct page *page,
unsigned int pg_offset, int mirror_num)
{
struct btrfs_io_stripe smap = { 0 };
struct bio_vec bvec;
struct bio bio;
int ret = 0;
ASSERT(!(fs_info->sb->s_flags & SB_RDONLY));
BUG_ON(!mirror_num);
if (btrfs_repair_one_zone(fs_info, logical))
return 0;
/*
* Avoid races with device replace and make sure our bioc has devices
* associated to its stripes that don't go away while we are doing the
* read repair operation.
*/
btrfs_bio_counter_inc_blocked(fs_info);
ret = btrfs_map_repair_block(fs_info, &smap, logical, length, mirror_num);
if (ret < 0)
goto out_counter_dec;
if (!smap.dev->bdev ||
!test_bit(BTRFS_DEV_STATE_WRITEABLE, &smap.dev->dev_state)) {
ret = -EIO;
goto out_counter_dec;
}
bio_init(&bio, smap.dev->bdev, &bvec, 1, REQ_OP_WRITE | REQ_SYNC);
bio.bi_iter.bi_sector = smap.physical >> SECTOR_SHIFT;
__bio_add_page(&bio, page, length, pg_offset);
btrfsic_check_bio(&bio);
ret = submit_bio_wait(&bio);
if (ret) {
/* try to remap that extent elsewhere? */
btrfs_dev_stat_inc_and_print(smap.dev, BTRFS_DEV_STAT_WRITE_ERRS);
goto out_bio_uninit;
}
btrfs_info_rl_in_rcu(fs_info,
"read error corrected: ino %llu off %llu (dev %s sector %llu)",
ino, start, btrfs_dev_name(smap.dev),
smap.physical >> SECTOR_SHIFT);
ret = 0;
out_bio_uninit:
bio_uninit(&bio);
out_counter_dec:
btrfs_bio_counter_dec(fs_info);
return ret;
}
/*
* Submit a btrfs_bio based repair write.
*
* If @dev_replace is true, the write would be submitted to dev-replace target.
*/
void btrfs_submit_repair_write(struct btrfs_bio *bbio, int mirror_num, bool dev_replace)
{
struct btrfs_fs_info *fs_info = bbio->fs_info;
u64 logical = bbio->bio.bi_iter.bi_sector << SECTOR_SHIFT;
u64 length = bbio->bio.bi_iter.bi_size;
struct btrfs_io_stripe smap = { 0 };
int ret;
ASSERT(fs_info);
ASSERT(mirror_num > 0);
ASSERT(btrfs_op(&bbio->bio) == BTRFS_MAP_WRITE);
ASSERT(!bbio->inode);
btrfs_bio_counter_inc_blocked(fs_info);
ret = btrfs_map_repair_block(fs_info, &smap, logical, length, mirror_num);
if (ret < 0)
goto fail;
if (dev_replace) {
ASSERT(smap.dev == fs_info->dev_replace.srcdev);
smap.dev = fs_info->dev_replace.tgtdev;
}
__btrfs_submit_bio(&bbio->bio, NULL, &smap, mirror_num);
return;
fail:
btrfs_bio_counter_dec(fs_info);
btrfs_bio_end_io(bbio, errno_to_blk_status(ret));
}
int __init btrfs_bioset_init(void)
{
if (bioset_init(&btrfs_bioset, BIO_POOL_SIZE,
offsetof(struct btrfs_bio, bio),
BIOSET_NEED_BVECS))
return -ENOMEM;
if (bioset_init(&btrfs_clone_bioset, BIO_POOL_SIZE,
offsetof(struct btrfs_bio, bio), 0))
goto out_free_bioset;
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
if (bioset_init(&btrfs_repair_bioset, BIO_POOL_SIZE,
offsetof(struct btrfs_bio, bio),
BIOSET_NEED_BVECS))
goto out_free_clone_bioset;
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
if (mempool_init_kmalloc_pool(&btrfs_failed_bio_pool, BIO_POOL_SIZE,
sizeof(struct btrfs_failed_bio)))
goto out_free_repair_bioset;
return 0;
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
out_free_repair_bioset:
bioset_exit(&btrfs_repair_bioset);
out_free_clone_bioset:
bioset_exit(&btrfs_clone_bioset);
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
out_free_bioset:
bioset_exit(&btrfs_bioset);
return -ENOMEM;
}
void __cold btrfs_bioset_exit(void)
{
btrfs: handle checksum validation and repair at the storage layer Currently btrfs handles checksum validation and repair in the end I/O handler for the btrfs_bio. This leads to a lot of duplicate code plus issues with varying semantics or bugs, e.g. - the until recently broken repair for compressed extents - the fact that encoded reads validate the checksums but do not kick of read repair - the inconsistent checking of the BTRFS_FS_STATE_NO_CSUMS flag This commit revamps the checksum validation and repair code to instead work below the btrfs_submit_bio interfaces. In case of a checksum failure (or a plain old I/O error), the repair is now kicked off before the upper level ->end_io handler is invoked. Progress of an in-progress repair is tracked by a small structure that is allocated using a mempool for each original bio with failed sectors, which holds a reference to the original bio. This new structure is allocated using a mempool to guarantee forward progress even under memory pressure. The mempool will be replenished when the repair completes, just as the mempools backing the bios. There is one significant behavior change here: If repair fails or is impossible to start with, the whole bio will be failed to the upper layer. This is the behavior that all I/O submitters except for buffered I/O already emulated in their end_io handler. For buffered I/O this now means that a large readahead request can fail due to a single bad sector, but as readahead errors are ignored the following readpage if the sector is actually accessed will still be able to read. This also matches the I/O failure handling in other file systems. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-21 06:50:07 +00:00
mempool_exit(&btrfs_failed_bio_pool);
bioset_exit(&btrfs_repair_bioset);
bioset_exit(&btrfs_clone_bioset);
bioset_exit(&btrfs_bioset);
}