linux/drivers/scsi/3w-sas.c

1863 lines
57 KiB
C
Raw Normal View History

/*
3w-sas.c -- LSI 3ware SAS/SATA-RAID Controller device driver for Linux.
Written By: Adam Radford <aradford@gmail.com>
Copyright (C) 2009 LSI Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
NO WARRANTY
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
solely responsible for determining the appropriateness of using and
distributing the Program and assumes all risks associated with its
exercise of rights under this Agreement, including but not limited to
the risks and costs of program errors, damage to or loss of data,
programs or equipment, and unavailability or interruption of operations.
DISCLAIMER OF LIABILITY
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Controllers supported by this driver:
LSI 3ware 9750 6Gb/s SAS/SATA-RAID
Bugs/Comments/Suggestions should be mailed to:
aradford@gmail.com
History
-------
3.26.02.000 - Initial driver release.
*/
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/time.h>
#include <linux/mutex.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/uaccess.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_cmnd.h>
#include "3w-sas.h"
/* Globals */
#define TW_DRIVER_VERSION "3.26.02.000"
static DEFINE_MUTEX(twl_chrdev_mutex);
static TW_Device_Extension *twl_device_extension_list[TW_MAX_SLOT];
static unsigned int twl_device_extension_count;
static int twl_major = -1;
extern struct timezone sys_tz;
/* Module parameters */
MODULE_AUTHOR ("LSI");
MODULE_DESCRIPTION ("LSI 3ware SAS/SATA-RAID Linux Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(TW_DRIVER_VERSION);
static int use_msi;
module_param(use_msi, int, S_IRUGO);
MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts. Default: 0");
/* Function prototypes */
static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset);
/* Functions */
/* This function returns AENs through sysfs */
static ssize_t twl_sysfs_aen_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *outbuf, loff_t offset, size_t count)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct Scsi_Host *shost = class_to_shost(dev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata;
unsigned long flags = 0;
ssize_t ret;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
spin_lock_irqsave(tw_dev->host->host_lock, flags);
ret = memory_read_from_buffer(outbuf, count, &offset, tw_dev->event_queue[0], sizeof(TW_Event) * TW_Q_LENGTH);
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
return ret;
} /* End twl_sysfs_aen_read() */
/* aen_read sysfs attribute initializer */
static struct bin_attribute twl_sysfs_aen_read_attr = {
.attr = {
.name = "3ware_aen_read",
.mode = S_IRUSR,
},
.size = 0,
.read = twl_sysfs_aen_read
};
/* This function returns driver compatibility info through sysfs */
static ssize_t twl_sysfs_compat_info(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *outbuf, loff_t offset, size_t count)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct Scsi_Host *shost = class_to_shost(dev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata;
unsigned long flags = 0;
ssize_t ret;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
spin_lock_irqsave(tw_dev->host->host_lock, flags);
ret = memory_read_from_buffer(outbuf, count, &offset, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
return ret;
} /* End twl_sysfs_compat_info() */
/* compat_info sysfs attribute initializer */
static struct bin_attribute twl_sysfs_compat_info_attr = {
.attr = {
.name = "3ware_compat_info",
.mode = S_IRUSR,
},
.size = 0,
.read = twl_sysfs_compat_info
};
/* Show some statistics about the card */
static ssize_t twl_show_stats(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *host = class_to_shost(dev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
unsigned long flags = 0;
ssize_t len;
spin_lock_irqsave(tw_dev->host->host_lock, flags);
len = snprintf(buf, PAGE_SIZE, "3w-sas Driver version: %s\n"
"Current commands posted: %4d\n"
"Max commands posted: %4d\n"
"Last sgl length: %4d\n"
"Max sgl length: %4d\n"
"Last sector count: %4d\n"
"Max sector count: %4d\n"
"SCSI Host Resets: %4d\n"
"AEN's: %4d\n",
TW_DRIVER_VERSION,
tw_dev->posted_request_count,
tw_dev->max_posted_request_count,
tw_dev->sgl_entries,
tw_dev->max_sgl_entries,
tw_dev->sector_count,
tw_dev->max_sector_count,
tw_dev->num_resets,
tw_dev->aen_count);
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
return len;
} /* End twl_show_stats() */
/* stats sysfs attribute initializer */
static struct device_attribute twl_host_stats_attr = {
.attr = {
.name = "3ware_stats",
.mode = S_IRUGO,
},
.show = twl_show_stats
};
/* Host attributes initializer */
static struct device_attribute *twl_host_attrs[] = {
&twl_host_stats_attr,
NULL,
};
/* This function will look up an AEN severity string */
static char *twl_aen_severity_lookup(unsigned char severity_code)
{
char *retval = NULL;
if ((severity_code < (unsigned char) TW_AEN_SEVERITY_ERROR) ||
(severity_code > (unsigned char) TW_AEN_SEVERITY_DEBUG))
goto out;
retval = twl_aen_severity_table[severity_code];
out:
return retval;
} /* End twl_aen_severity_lookup() */
/* This function will queue an event */
static void twl_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header)
{
u32 local_time;
TW_Event *event;
unsigned short aen;
char host[16];
char *error_str;
tw_dev->aen_count++;
/* Fill out event info */
event = tw_dev->event_queue[tw_dev->error_index];
host[0] = '\0';
if (tw_dev->host)
sprintf(host, " scsi%d:", tw_dev->host->host_no);
aen = le16_to_cpu(header->status_block.error);
memset(event, 0, sizeof(TW_Event));
event->severity = TW_SEV_OUT(header->status_block.severity__reserved);
/* event->time_stamp_sec overflows in y2106 */
local_time = (u32)(ktime_get_real_seconds() - (sys_tz.tz_minuteswest * 60));
event->time_stamp_sec = local_time;
event->aen_code = aen;
event->retrieved = TW_AEN_NOT_RETRIEVED;
event->sequence_id = tw_dev->error_sequence_id;
tw_dev->error_sequence_id++;
/* Check for embedded error string */
error_str = &(header->err_specific_desc[strlen(header->err_specific_desc)+1]);
header->err_specific_desc[sizeof(header->err_specific_desc) - 1] = '\0';
event->parameter_len = strlen(header->err_specific_desc);
memcpy(event->parameter_data, header->err_specific_desc, event->parameter_len + 1 + strlen(error_str));
if (event->severity != TW_AEN_SEVERITY_DEBUG)
printk(KERN_WARNING "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n",
host,
twl_aen_severity_lookup(TW_SEV_OUT(header->status_block.severity__reserved)),
TW_MESSAGE_SOURCE_CONTROLLER_EVENT, aen, error_str,
header->err_specific_desc);
else
tw_dev->aen_count--;
tw_dev->error_index = (tw_dev->error_index + 1 ) % TW_Q_LENGTH;
} /* End twl_aen_queue_event() */
/* This function will attempt to post a command packet to the board */
static int twl_post_command_packet(TW_Device_Extension *tw_dev, int request_id)
{
dma_addr_t command_que_value;
command_que_value = tw_dev->command_packet_phys[request_id];
command_que_value += TW_COMMAND_OFFSET;
/* First write upper 4 bytes */
writel((u32)((u64)command_que_value >> 32), TWL_HIBQPH_REG_ADDR(tw_dev));
/* Then the lower 4 bytes */
writel((u32)(command_que_value | TWL_PULL_MODE), TWL_HIBQPL_REG_ADDR(tw_dev));
tw_dev->state[request_id] = TW_S_POSTED;
tw_dev->posted_request_count++;
if (tw_dev->posted_request_count > tw_dev->max_posted_request_count)
tw_dev->max_posted_request_count = tw_dev->posted_request_count;
return 0;
} /* End twl_post_command_packet() */
/* This function hands scsi cdb's to the firmware */
static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
unsigned char *cdb, int use_sg,
TW_SG_Entry_ISO *sglistarg)
{
TW_Command_Full *full_command_packet;
TW_Command_Apache *command_packet;
int i, sg_count;
struct scsi_cmnd *srb = NULL;
struct scatterlist *sg;
int retval = 1;
if (tw_dev->srb[request_id])
srb = tw_dev->srb[request_id];
/* Initialize command packet */
full_command_packet = tw_dev->command_packet_virt[request_id];
full_command_packet->header.header_desc.size_header = 128;
full_command_packet->header.status_block.error = 0;
full_command_packet->header.status_block.severity__reserved = 0;
command_packet = &full_command_packet->command.newcommand;
command_packet->status = 0;
command_packet->opcode__reserved = TW_OPRES_IN(0, TW_OP_EXECUTE_SCSI);
/* We forced 16 byte cdb use earlier */
if (!cdb)
memcpy(command_packet->cdb, srb->cmnd, TW_MAX_CDB_LEN);
else
memcpy(command_packet->cdb, cdb, TW_MAX_CDB_LEN);
if (srb) {
command_packet->unit = srb->device->id;
command_packet->request_id__lunl =
cpu_to_le16(TW_REQ_LUN_IN(srb->device->lun, request_id));
} else {
command_packet->request_id__lunl =
cpu_to_le16(TW_REQ_LUN_IN(0, request_id));
command_packet->unit = 0;
}
command_packet->sgl_offset = 16;
if (!sglistarg) {
/* Map sglist from scsi layer to cmd packet */
if (scsi_sg_count(srb)) {
sg_count = scsi_dma_map(srb);
if (sg_count <= 0)
goto out;
scsi_for_each_sg(srb, sg, sg_count, i) {
command_packet->sg_list[i].address = TW_CPU_TO_SGL(sg_dma_address(sg));
command_packet->sg_list[i].length = TW_CPU_TO_SGL(sg_dma_len(sg));
}
command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN((srb->device->lun >> 4), scsi_sg_count(tw_dev->srb[request_id])));
}
} else {
/* Internal cdb post */
for (i = 0; i < use_sg; i++) {
command_packet->sg_list[i].address = TW_CPU_TO_SGL(sglistarg[i].address);
command_packet->sg_list[i].length = TW_CPU_TO_SGL(sglistarg[i].length);
}
command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN(0, use_sg));
}
/* Update some stats */
if (srb) {
tw_dev->sector_count = scsi_bufflen(srb) / 512;
if (tw_dev->sector_count > tw_dev->max_sector_count)
tw_dev->max_sector_count = tw_dev->sector_count;
tw_dev->sgl_entries = scsi_sg_count(srb);
if (tw_dev->sgl_entries > tw_dev->max_sgl_entries)
tw_dev->max_sgl_entries = tw_dev->sgl_entries;
}
/* Now post the command to the board */
retval = twl_post_command_packet(tw_dev, request_id);
out:
return retval;
} /* End twl_scsiop_execute_scsi() */
/* This function will read the aen queue from the isr */
static int twl_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
{
unsigned char cdb[TW_MAX_CDB_LEN];
TW_SG_Entry_ISO sglist[1];
TW_Command_Full *full_command_packet;
int retval = 1;
full_command_packet = tw_dev->command_packet_virt[request_id];
memset(full_command_packet, 0, sizeof(TW_Command_Full));
/* Initialize cdb */
memset(&cdb, 0, TW_MAX_CDB_LEN);
cdb[0] = REQUEST_SENSE; /* opcode */
cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */
/* Initialize sglist */
memset(&sglist, 0, sizeof(TW_SG_Entry_ISO));
sglist[0].length = TW_SECTOR_SIZE;
sglist[0].address = tw_dev->generic_buffer_phys[request_id];
/* Mark internal command */
tw_dev->srb[request_id] = NULL;
/* Now post the command packet */
if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Post failed while reading AEN queue");
goto out;
}
retval = 0;
out:
return retval;
} /* End twl_aen_read_queue() */
/* This function will sync firmware time with the host time */
static void twl_aen_sync_time(TW_Device_Extension *tw_dev, int request_id)
{
u32 schedulertime;
TW_Command_Full *full_command_packet;
TW_Command *command_packet;
TW_Param_Apache *param;
time64_t local_time;
/* Fill out the command packet */
full_command_packet = tw_dev->command_packet_virt[request_id];
memset(full_command_packet, 0, sizeof(TW_Command_Full));
command_packet = &full_command_packet->command.oldcommand;
command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM);
command_packet->request_id = request_id;
command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE);
command_packet->size = TW_COMMAND_SIZE;
command_packet->byte6_offset.parameter_count = cpu_to_le16(1);
/* Setup the param */
param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id];
memset(param, 0, TW_SECTOR_SIZE);
param->table_id = cpu_to_le16(TW_TIMEKEEP_TABLE | 0x8000); /* Controller time keep table */
param->parameter_id = cpu_to_le16(0x3); /* SchedulerTime */
param->parameter_size_bytes = cpu_to_le16(4);
/* Convert system time in UTC to local time seconds since last
Sunday 12:00AM */
local_time = (ktime_get_real_seconds() - (sys_tz.tz_minuteswest * 60));
div_u64_rem(local_time - (3 * 86400), 604800, &schedulertime);
schedulertime = cpu_to_le32(schedulertime);
memcpy(param->data, &schedulertime, sizeof(u32));
/* Mark internal command */
tw_dev->srb[request_id] = NULL;
/* Now post the command */
twl_post_command_packet(tw_dev, request_id);
} /* End twl_aen_sync_time() */
/* This function will assign an available request id */
static void twl_get_request_id(TW_Device_Extension *tw_dev, int *request_id)
{
*request_id = tw_dev->free_queue[tw_dev->free_head];
tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH;
tw_dev->state[*request_id] = TW_S_STARTED;
} /* End twl_get_request_id() */
/* This function will free a request id */
static void twl_free_request_id(TW_Device_Extension *tw_dev, int request_id)
{
tw_dev->free_queue[tw_dev->free_tail] = request_id;
tw_dev->state[request_id] = TW_S_FINISHED;
tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
} /* End twl_free_request_id() */
/* This function will complete an aen request from the isr */
static int twl_aen_complete(TW_Device_Extension *tw_dev, int request_id)
{
TW_Command_Full *full_command_packet;
TW_Command *command_packet;
TW_Command_Apache_Header *header;
unsigned short aen;
int retval = 1;
header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id];
tw_dev->posted_request_count--;
aen = le16_to_cpu(header->status_block.error);
full_command_packet = tw_dev->command_packet_virt[request_id];
command_packet = &full_command_packet->command.oldcommand;
/* First check for internal completion of set param for time sync */
if (TW_OP_OUT(command_packet->opcode__sgloffset) == TW_OP_SET_PARAM) {
/* Keep reading the queue in case there are more aen's */
if (twl_aen_read_queue(tw_dev, request_id))
goto out2;
else {
retval = 0;
goto out;
}
}
switch (aen) {
case TW_AEN_QUEUE_EMPTY:
/* Quit reading the queue if this is the last one */
break;
case TW_AEN_SYNC_TIME_WITH_HOST:
twl_aen_sync_time(tw_dev, request_id);
retval = 0;
goto out;
default:
twl_aen_queue_event(tw_dev, header);
/* If there are more aen's, keep reading the queue */
if (twl_aen_read_queue(tw_dev, request_id))
goto out2;
else {
retval = 0;
goto out;
}
}
retval = 0;
out2:
tw_dev->state[request_id] = TW_S_COMPLETED;
twl_free_request_id(tw_dev, request_id);
clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags);
out:
return retval;
} /* End twl_aen_complete() */
/* This function will poll for a response */
static int twl_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds)
{
unsigned long before;
dma_addr_t mfa;
u32 regh, regl;
u32 response;
int retval = 1;
int found = 0;
before = jiffies;
while (!found) {
if (sizeof(dma_addr_t) > 4) {
regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev));
regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
mfa = ((u64)regh << 32) | regl;
} else
mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
response = (u32)mfa;
if (TW_RESID_OUT(response) == request_id)
found = 1;
if (time_after(jiffies, before + HZ * seconds))
goto out;
msleep(50);
}
retval = 0;
out:
return retval;
} /* End twl_poll_response() */
/* This function will drain the aen queue */
static int twl_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset)
{
int request_id = 0;
unsigned char cdb[TW_MAX_CDB_LEN];
TW_SG_Entry_ISO sglist[1];
int finished = 0, count = 0;
TW_Command_Full *full_command_packet;
TW_Command_Apache_Header *header;
unsigned short aen;
int first_reset = 0, queue = 0, retval = 1;
if (no_check_reset)
first_reset = 0;
else
first_reset = 1;
full_command_packet = tw_dev->command_packet_virt[request_id];
memset(full_command_packet, 0, sizeof(TW_Command_Full));
/* Initialize cdb */
memset(&cdb, 0, TW_MAX_CDB_LEN);
cdb[0] = REQUEST_SENSE; /* opcode */
cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */
/* Initialize sglist */
memset(&sglist, 0, sizeof(TW_SG_Entry_ISO));
sglist[0].length = TW_SECTOR_SIZE;
sglist[0].address = tw_dev->generic_buffer_phys[request_id];
/* Mark internal command */
tw_dev->srb[request_id] = NULL;
do {
/* Send command to the board */
if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "Error posting request sense");
goto out;
}
/* Now poll for completion */
if (twl_poll_response(tw_dev, request_id, 30)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "No valid response while draining AEN queue");
tw_dev->posted_request_count--;
goto out;
}
tw_dev->posted_request_count--;
header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id];
aen = le16_to_cpu(header->status_block.error);
queue = 0;
count++;
switch (aen) {
case TW_AEN_QUEUE_EMPTY:
if (first_reset != 1)
goto out;
else
finished = 1;
break;
case TW_AEN_SOFT_RESET:
if (first_reset == 0)
first_reset = 1;
else
queue = 1;
break;
case TW_AEN_SYNC_TIME_WITH_HOST:
break;
default:
queue = 1;
}
/* Now queue an event info */
if (queue)
twl_aen_queue_event(tw_dev, header);
} while ((finished == 0) && (count < TW_MAX_AEN_DRAIN));
if (count == TW_MAX_AEN_DRAIN)
goto out;
retval = 0;
out:
tw_dev->state[request_id] = TW_S_INITIAL;
return retval;
} /* End twl_aen_drain_queue() */
/* This function will allocate memory and check if it is correctly aligned */
static int twl_allocate_memory(TW_Device_Extension *tw_dev, int size, int which)
{
int i;
dma_addr_t dma_handle;
unsigned long *cpu_addr;
int retval = 1;
cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev,
size * TW_Q_LENGTH, &dma_handle,
GFP_KERNEL);
if (!cpu_addr) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed");
goto out;
}
for (i = 0; i < TW_Q_LENGTH; i++) {
switch(which) {
case 0:
tw_dev->command_packet_phys[i] = dma_handle+(i*size);
tw_dev->command_packet_virt[i] = (TW_Command_Full *)((unsigned char *)cpu_addr + (i*size));
break;
case 1:
tw_dev->generic_buffer_phys[i] = dma_handle+(i*size);
tw_dev->generic_buffer_virt[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
break;
case 2:
tw_dev->sense_buffer_phys[i] = dma_handle+(i*size);
tw_dev->sense_buffer_virt[i] = (TW_Command_Apache_Header *)((unsigned char *)cpu_addr + (i*size));
break;
}
}
retval = 0;
out:
return retval;
} /* End twl_allocate_memory() */
/* This function will load the request id and various sgls for ioctls */
static void twl_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length)
{
TW_Command *oldcommand;
TW_Command_Apache *newcommand;
TW_SG_Entry_ISO *sgl;
unsigned int pae = 0;
if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4))
pae = 1;
if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) {
newcommand = &full_command_packet->command.newcommand;
newcommand->request_id__lunl =
cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id));
if (length) {
newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
newcommand->sg_list[0].length = TW_CPU_TO_SGL(length);
}
newcommand->sgl_entries__lunh =
cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0));
} else {
oldcommand = &full_command_packet->command.oldcommand;
oldcommand->request_id = request_id;
if (TW_SGL_OUT(oldcommand->opcode__sgloffset)) {
/* Load the sg list */
sgl = (TW_SG_Entry_ISO *)((u32 *)oldcommand+oldcommand->size - (sizeof(TW_SG_Entry_ISO)/4) + pae + (sizeof(dma_addr_t) > 4 ? 1 : 0));
sgl->address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
sgl->length = TW_CPU_TO_SGL(length);
oldcommand->size += pae;
oldcommand->size += sizeof(dma_addr_t) > 4 ? 1 : 0;
}
}
} /* End twl_load_sgl() */
/* This function handles ioctl for the character device
This interface is used by smartmontools open source software */
static long twl_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long timeout;
unsigned long *cpu_addr, data_buffer_length_adjusted = 0, flags = 0;
dma_addr_t dma_handle;
int request_id = 0;
TW_Ioctl_Driver_Command driver_command;
struct inode *inode = file_inode(file);
TW_Ioctl_Buf_Apache *tw_ioctl;
TW_Command_Full *full_command_packet;
TW_Device_Extension *tw_dev = twl_device_extension_list[iminor(inode)];
int retval = -EFAULT;
void __user *argp = (void __user *)arg;
mutex_lock(&twl_chrdev_mutex);
/* Only let one of these through at a time */
if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) {
retval = -EINTR;
goto out;
}
/* First copy down the driver command */
if (copy_from_user(&driver_command, argp, sizeof(TW_Ioctl_Driver_Command)))
goto out2;
/* Check data buffer size */
if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) {
retval = -EINVAL;
goto out2;
}
/* Hardware can only do multiple of 512 byte transfers */
data_buffer_length_adjusted = (driver_command.buffer_length + 511) & ~511;
/* Now allocate ioctl buf memory */
cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, &dma_handle, GFP_KERNEL);
if (!cpu_addr) {
retval = -ENOMEM;
goto out2;
}
tw_ioctl = (TW_Ioctl_Buf_Apache *)cpu_addr;
/* Now copy down the entire ioctl */
if (copy_from_user(tw_ioctl, argp, driver_command.buffer_length + sizeof(TW_Ioctl_Buf_Apache) - 1))
goto out3;
/* See which ioctl we are doing */
switch (cmd) {
case TW_IOCTL_FIRMWARE_PASS_THROUGH:
spin_lock_irqsave(tw_dev->host->host_lock, flags);
twl_get_request_id(tw_dev, &request_id);
/* Flag internal command */
tw_dev->srb[request_id] = NULL;
/* Flag chrdev ioctl */
tw_dev->chrdev_request_id = request_id;
full_command_packet = (TW_Command_Full *)&tw_ioctl->firmware_command;
/* Load request id and sglist for both command types */
twl_load_sgl(tw_dev, full_command_packet, request_id, dma_handle, data_buffer_length_adjusted);
memcpy(tw_dev->command_packet_virt[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command_Full));
/* Now post the command packet to the controller */
twl_post_command_packet(tw_dev, request_id);
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ;
/* Now wait for command to complete */
timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
/* We timed out, and didn't get an interrupt */
if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
/* Now we need to reset the board */
printk(KERN_WARNING "3w-sas: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n",
tw_dev->host->host_no, TW_DRIVER, 0x6,
cmd);
retval = -EIO;
twl_reset_device_extension(tw_dev, 1);
goto out3;
}
/* Now copy in the command packet response */
memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virt[request_id], sizeof(TW_Command_Full));
/* Now complete the io */
spin_lock_irqsave(tw_dev->host->host_lock, flags);
tw_dev->posted_request_count--;
tw_dev->state[request_id] = TW_S_COMPLETED;
twl_free_request_id(tw_dev, request_id);
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
break;
default:
retval = -ENOTTY;
goto out3;
}
/* Now copy the entire response to userspace */
if (copy_to_user(argp, tw_ioctl, sizeof(TW_Ioctl_Buf_Apache) + driver_command.buffer_length - 1) == 0)
retval = 0;
out3:
/* Now free ioctl buf memory */
dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, cpu_addr, dma_handle);
out2:
mutex_unlock(&tw_dev->ioctl_lock);
out:
mutex_unlock(&twl_chrdev_mutex);
return retval;
} /* End twl_chrdev_ioctl() */
/* This function handles open for the character device */
static int twl_chrdev_open(struct inode *inode, struct file *file)
{
unsigned int minor_number;
int retval = -ENODEV;
if (!capable(CAP_SYS_ADMIN)) {
retval = -EACCES;
goto out;
}
minor_number = iminor(inode);
if (minor_number >= twl_device_extension_count)
goto out;
retval = 0;
out:
return retval;
} /* End twl_chrdev_open() */
/* File operations struct for character device */
static const struct file_operations twl_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = twl_chrdev_ioctl,
.open = twl_chrdev_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.release = NULL,
.llseek = noop_llseek,
};
/* This function passes sense data from firmware to scsi layer */
static int twl_fill_sense(TW_Device_Extension *tw_dev, int i, int request_id, int copy_sense, int print_host)
{
TW_Command_Apache_Header *header;
TW_Command_Full *full_command_packet;
unsigned short error;
char *error_str;
header = tw_dev->sense_buffer_virt[i];
full_command_packet = tw_dev->command_packet_virt[request_id];
/* Get embedded firmware error string */
error_str = &(header->err_specific_desc[strlen(header->err_specific_desc) + 1]);
/* Don't print error for Logical unit not supported during rollcall */
error = le16_to_cpu(header->status_block.error);
if ((error != TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED) && (error != TW_ERROR_UNIT_OFFLINE) && (error != TW_ERROR_INVALID_FIELD_IN_CDB)) {
if (print_host)
printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n",
tw_dev->host->host_no,
TW_MESSAGE_SOURCE_CONTROLLER_ERROR,
header->status_block.error,
error_str,
header->err_specific_desc);
else
printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n",
TW_MESSAGE_SOURCE_CONTROLLER_ERROR,
header->status_block.error,
error_str,
header->err_specific_desc);
}
if (copy_sense) {
memcpy(tw_dev->srb[request_id]->sense_buffer, header->sense_data, TW_SENSE_DATA_LENGTH);
tw_dev->srb[request_id]->result = (full_command_packet->command.newcommand.status << 1);
goto out;
}
out:
return 1;
} /* End twl_fill_sense() */
/* This function will free up device extension resources */
static void twl_free_device_extension(TW_Device_Extension *tw_dev)
{
if (tw_dev->command_packet_virt[0])
dma_free_coherent(&tw_dev->tw_pci_dev->dev,
sizeof(TW_Command_Full)*TW_Q_LENGTH,
tw_dev->command_packet_virt[0],
tw_dev->command_packet_phys[0]);
if (tw_dev->generic_buffer_virt[0])
dma_free_coherent(&tw_dev->tw_pci_dev->dev,
TW_SECTOR_SIZE*TW_Q_LENGTH,
tw_dev->generic_buffer_virt[0],
tw_dev->generic_buffer_phys[0]);
if (tw_dev->sense_buffer_virt[0])
dma_free_coherent(&tw_dev->tw_pci_dev->dev,
sizeof(TW_Command_Apache_Header)*
TW_Q_LENGTH,
tw_dev->sense_buffer_virt[0],
tw_dev->sense_buffer_phys[0]);
kfree(tw_dev->event_queue[0]);
} /* End twl_free_device_extension() */
/* This function will get parameter table entries from the firmware */
static void *twl_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes)
{
TW_Command_Full *full_command_packet;
TW_Command *command_packet;
TW_Param_Apache *param;
void *retval = NULL;
/* Setup the command packet */
full_command_packet = tw_dev->command_packet_virt[request_id];
memset(full_command_packet, 0, sizeof(TW_Command_Full));
command_packet = &full_command_packet->command.oldcommand;
command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
command_packet->size = TW_COMMAND_SIZE;
command_packet->request_id = request_id;
command_packet->byte6_offset.block_count = cpu_to_le16(1);
/* Now setup the param */
param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id];
memset(param, 0, TW_SECTOR_SIZE);
param->table_id = cpu_to_le16(table_id | 0x8000);
param->parameter_id = cpu_to_le16(parameter_id);
param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes);
command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE);
/* Post the command packet to the board */
twl_post_command_packet(tw_dev, request_id);
/* Poll for completion */
if (twl_poll_response(tw_dev, request_id, 30))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "No valid response during get param")
else
retval = (void *)&(param->data[0]);
tw_dev->posted_request_count--;
tw_dev->state[request_id] = TW_S_INITIAL;
return retval;
} /* End twl_get_param() */
/* This function will send an initconnection command to controller */
static int twl_initconnection(TW_Device_Extension *tw_dev, int message_credits,
u32 set_features, unsigned short current_fw_srl,
unsigned short current_fw_arch_id,
unsigned short current_fw_branch,
unsigned short current_fw_build,
unsigned short *fw_on_ctlr_srl,
unsigned short *fw_on_ctlr_arch_id,
unsigned short *fw_on_ctlr_branch,
unsigned short *fw_on_ctlr_build,
u32 *init_connect_result)
{
TW_Command_Full *full_command_packet;
TW_Initconnect *tw_initconnect;
int request_id = 0, retval = 1;
/* Initialize InitConnection command packet */
full_command_packet = tw_dev->command_packet_virt[request_id];
memset(full_command_packet, 0, sizeof(TW_Command_Full));
full_command_packet->header.header_desc.size_header = 128;
tw_initconnect = (TW_Initconnect *)&full_command_packet->command.oldcommand;
tw_initconnect->opcode__reserved = TW_OPRES_IN(0, TW_OP_INIT_CONNECTION);
tw_initconnect->request_id = request_id;
tw_initconnect->message_credits = cpu_to_le16(message_credits);
tw_initconnect->features = set_features;
/* Turn on 64-bit sgl support if we need to */
tw_initconnect->features |= sizeof(dma_addr_t) > 4 ? 1 : 0;
tw_initconnect->features = cpu_to_le32(tw_initconnect->features);
if (set_features & TW_EXTENDED_INIT_CONNECT) {
tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE_EXTENDED;
tw_initconnect->fw_srl = cpu_to_le16(current_fw_srl);
tw_initconnect->fw_arch_id = cpu_to_le16(current_fw_arch_id);
tw_initconnect->fw_branch = cpu_to_le16(current_fw_branch);
tw_initconnect->fw_build = cpu_to_le16(current_fw_build);
} else
tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE;
/* Send command packet to the board */
twl_post_command_packet(tw_dev, request_id);
/* Poll for completion */
if (twl_poll_response(tw_dev, request_id, 30)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x8, "No valid response during init connection");
} else {
if (set_features & TW_EXTENDED_INIT_CONNECT) {
*fw_on_ctlr_srl = le16_to_cpu(tw_initconnect->fw_srl);
*fw_on_ctlr_arch_id = le16_to_cpu(tw_initconnect->fw_arch_id);
*fw_on_ctlr_branch = le16_to_cpu(tw_initconnect->fw_branch);
*fw_on_ctlr_build = le16_to_cpu(tw_initconnect->fw_build);
*init_connect_result = le32_to_cpu(tw_initconnect->result);
}
retval = 0;
}
tw_dev->posted_request_count--;
tw_dev->state[request_id] = TW_S_INITIAL;
return retval;
} /* End twl_initconnection() */
/* This function will initialize the fields of a device extension */
static int twl_initialize_device_extension(TW_Device_Extension *tw_dev)
{
int i, retval = 1;
/* Initialize command packet buffers */
if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Full), 0)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x9, "Command packet memory allocation failed");
goto out;
}
/* Initialize generic buffer */
if (twl_allocate_memory(tw_dev, TW_SECTOR_SIZE, 1)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Generic memory allocation failed");
goto out;
}
/* Allocate sense buffers */
if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Apache_Header), 2)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xb, "Sense buffer allocation failed");
goto out;
}
/* Allocate event info space */
tw_dev->event_queue[0] = kcalloc(TW_Q_LENGTH, sizeof(TW_Event), GFP_KERNEL);
if (!tw_dev->event_queue[0]) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "Event info memory allocation failed");
goto out;
}
for (i = 0; i < TW_Q_LENGTH; i++) {
tw_dev->event_queue[i] = (TW_Event *)((unsigned char *)tw_dev->event_queue[0] + (i * sizeof(TW_Event)));
tw_dev->free_queue[i] = i;
tw_dev->state[i] = TW_S_INITIAL;
}
tw_dev->free_head = TW_Q_START;
tw_dev->free_tail = TW_Q_START;
tw_dev->error_sequence_id = 1;
tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
mutex_init(&tw_dev->ioctl_lock);
init_waitqueue_head(&tw_dev->ioctl_wqueue);
retval = 0;
out:
return retval;
} /* End twl_initialize_device_extension() */
/* This function will handle attention interrupts */
static int twl_handle_attention_interrupt(TW_Device_Extension *tw_dev)
{
int retval = 1;
u32 request_id, doorbell;
/* Read doorbell status */
doorbell = readl(TWL_HOBDB_REG_ADDR(tw_dev));
/* Check for controller errors */
if (doorbell & TWL_DOORBELL_CONTROLLER_ERROR) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "Microcontroller Error: clearing");
goto out;
}
/* Check if we need to perform an AEN drain */
if (doorbell & TWL_DOORBELL_ATTENTION_INTERRUPT) {
if (!(test_and_set_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags))) {
twl_get_request_id(tw_dev, &request_id);
if (twl_aen_read_queue(tw_dev, request_id)) {
tw_dev->state[request_id] = TW_S_COMPLETED;
twl_free_request_id(tw_dev, request_id);
clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags);
}
}
}
retval = 0;
out:
/* Clear doorbell interrupt */
TWL_CLEAR_DB_INTERRUPT(tw_dev);
/* Make sure the clear was flushed by reading it back */
readl(TWL_HOBDBC_REG_ADDR(tw_dev));
return retval;
} /* End twl_handle_attention_interrupt() */
/* Interrupt service routine */
static irqreturn_t twl_interrupt(int irq, void *dev_instance)
{
TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
int i, handled = 0, error = 0;
dma_addr_t mfa = 0;
u32 reg, regl, regh, response, request_id = 0;
struct scsi_cmnd *cmd;
TW_Command_Full *full_command_packet;
spin_lock(tw_dev->host->host_lock);
/* Read host interrupt status */
reg = readl(TWL_HISTAT_REG_ADDR(tw_dev));
/* Check if this is our interrupt, otherwise bail */
if (!(reg & TWL_HISTATUS_VALID_INTERRUPT))
goto twl_interrupt_bail;
handled = 1;
/* If we are resetting, bail */
if (test_bit(TW_IN_RESET, &tw_dev->flags))
goto twl_interrupt_bail;
/* Attention interrupt */
if (reg & TWL_HISTATUS_ATTENTION_INTERRUPT) {
if (twl_handle_attention_interrupt(tw_dev)) {
TWL_MASK_INTERRUPTS(tw_dev);
goto twl_interrupt_bail;
}
}
/* Response interrupt */
while (reg & TWL_HISTATUS_RESPONSE_INTERRUPT) {
if (sizeof(dma_addr_t) > 4) {
regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev));
regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
mfa = ((u64)regh << 32) | regl;
} else
mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
error = 0;
response = (u32)mfa;
/* Check for command packet error */
if (!TW_NOTMFA_OUT(response)) {
for (i=0;i<TW_Q_LENGTH;i++) {
if (tw_dev->sense_buffer_phys[i] == mfa) {
request_id = le16_to_cpu(tw_dev->sense_buffer_virt[i]->header_desc.request_id);
if (tw_dev->srb[request_id] != NULL)
error = twl_fill_sense(tw_dev, i, request_id, 1, 1);
else {
/* Skip ioctl error prints */
if (request_id != tw_dev->chrdev_request_id)
error = twl_fill_sense(tw_dev, i, request_id, 0, 1);
else
memcpy(tw_dev->command_packet_virt[request_id], tw_dev->sense_buffer_virt[i], sizeof(TW_Command_Apache_Header));
}
/* Now re-post the sense buffer */
writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev));
writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev));
break;
}
}
} else
request_id = TW_RESID_OUT(response);
full_command_packet = tw_dev->command_packet_virt[request_id];
/* Check for correct state */
if (tw_dev->state[request_id] != TW_S_POSTED) {
if (tw_dev->srb[request_id] != NULL) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Received a request id that wasn't posted");
TWL_MASK_INTERRUPTS(tw_dev);
goto twl_interrupt_bail;
}
}
/* Check for internal command completion */
if (tw_dev->srb[request_id] == NULL) {
if (request_id != tw_dev->chrdev_request_id) {
if (twl_aen_complete(tw_dev, request_id))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "Error completing AEN during attention interrupt");
} else {
tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
wake_up(&tw_dev->ioctl_wqueue);
}
} else {
cmd = tw_dev->srb[request_id];
if (!error)
cmd->result = (DID_OK << 16);
/* Report residual bytes for single sgl */
if ((scsi_sg_count(cmd) <= 1) && (full_command_packet->command.newcommand.status == 0)) {
if (full_command_packet->command.newcommand.sg_list[0].length < scsi_bufflen(tw_dev->srb[request_id]))
scsi_set_resid(cmd, scsi_bufflen(cmd) - full_command_packet->command.newcommand.sg_list[0].length);
}
/* Now complete the io */
scsi_dma_unmap(cmd);
cmd->scsi_done(cmd);
tw_dev->state[request_id] = TW_S_COMPLETED;
twl_free_request_id(tw_dev, request_id);
tw_dev->posted_request_count--;
}
/* Check for another response interrupt */
reg = readl(TWL_HISTAT_REG_ADDR(tw_dev));
}
twl_interrupt_bail:
spin_unlock(tw_dev->host->host_lock);
return IRQ_RETVAL(handled);
} /* End twl_interrupt() */
/* This function will poll for a register change */
static int twl_poll_register(TW_Device_Extension *tw_dev, void *reg, u32 value, u32 result, int seconds)
{
unsigned long before;
int retval = 1;
u32 reg_value;
reg_value = readl(reg);
before = jiffies;
while ((reg_value & value) != result) {
reg_value = readl(reg);
if (time_after(jiffies, before + HZ * seconds))
goto out;
msleep(50);
}
retval = 0;
out:
return retval;
} /* End twl_poll_register() */
/* This function will reset a controller */
static int twl_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset)
{
int retval = 1;
int i = 0;
u32 status = 0;
unsigned short fw_on_ctlr_srl = 0, fw_on_ctlr_arch_id = 0;
unsigned short fw_on_ctlr_branch = 0, fw_on_ctlr_build = 0;
u32 init_connect_result = 0;
int tries = 0;
int do_soft_reset = soft_reset;
while (tries < TW_MAX_RESET_TRIES) {
/* Do a soft reset if one is needed */
if (do_soft_reset) {
TWL_SOFT_RESET(tw_dev);
/* Make sure controller is in a good state */
if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, 0x0, 30)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Controller never went non-ready during reset sequence");
tries++;
continue;
}
if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, TWL_CONTROLLER_READY, 60)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x11, "Controller not ready during reset sequence");
tries++;
continue;
}
}
/* Initconnect */
if (twl_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS,
TW_EXTENDED_INIT_CONNECT, TW_CURRENT_DRIVER_SRL,
TW_9750_ARCH_ID, TW_CURRENT_DRIVER_BRANCH,
TW_CURRENT_DRIVER_BUILD, &fw_on_ctlr_srl,
&fw_on_ctlr_arch_id, &fw_on_ctlr_branch,
&fw_on_ctlr_build, &init_connect_result)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x12, "Initconnection failed while checking SRL");
do_soft_reset = 1;
tries++;
continue;
}
/* Load sense buffers */
while (i < TW_Q_LENGTH) {
writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev));
writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev));
/* Check status for over-run after each write */
status = readl(TWL_STATUS_REG_ADDR(tw_dev));
if (!(status & TWL_STATUS_OVERRUN_SUBMIT))
i++;
}
/* Now check status */
status = readl(TWL_STATUS_REG_ADDR(tw_dev));
if (status) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "Bad controller status after loading sense buffers");
do_soft_reset = 1;
tries++;
continue;
}
/* Drain the AEN queue */
if (twl_aen_drain_queue(tw_dev, soft_reset)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x14, "AEN drain failed during reset sequence");
do_soft_reset = 1;
tries++;
continue;
}
/* Load rest of compatibility struct */
strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD;
tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL;
tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH;
tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD;
tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl;
tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch;
tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build;
/* If we got here, controller is in a good state */
retval = 0;
goto out;
}
out:
return retval;
} /* End twl_reset_sequence() */
/* This function will reset a device extension */
static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset)
{
int i = 0, retval = 1;
unsigned long flags = 0;
/* Block SCSI requests while we are resetting */
if (ioctl_reset)
scsi_block_requests(tw_dev->host);
set_bit(TW_IN_RESET, &tw_dev->flags);
TWL_MASK_INTERRUPTS(tw_dev);
TWL_CLEAR_DB_INTERRUPT(tw_dev);
spin_lock_irqsave(tw_dev->host->host_lock, flags);
/* Abort all requests that are in progress */
for (i = 0; i < TW_Q_LENGTH; i++) {
if ((tw_dev->state[i] != TW_S_FINISHED) &&
(tw_dev->state[i] != TW_S_INITIAL) &&
(tw_dev->state[i] != TW_S_COMPLETED)) {
struct scsi_cmnd *cmd = tw_dev->srb[i];
if (cmd) {
cmd->result = (DID_RESET << 16);
scsi_dma_unmap(cmd);
cmd->scsi_done(cmd);
}
}
}
/* Reset queues and counts */
for (i = 0; i < TW_Q_LENGTH; i++) {
tw_dev->free_queue[i] = i;
tw_dev->state[i] = TW_S_INITIAL;
}
tw_dev->free_head = TW_Q_START;
tw_dev->free_tail = TW_Q_START;
tw_dev->posted_request_count = 0;
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
if (twl_reset_sequence(tw_dev, 1))
goto out;
TWL_UNMASK_INTERRUPTS(tw_dev);
clear_bit(TW_IN_RESET, &tw_dev->flags);
tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
retval = 0;
out:
if (ioctl_reset)
scsi_unblock_requests(tw_dev->host);
return retval;
} /* End twl_reset_device_extension() */
/* This funciton returns unit geometry in cylinders/heads/sectors */
static int twl_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[])
{
int heads, sectors;
if (capacity >= 0x200000) {
heads = 255;
sectors = 63;
} else {
heads = 64;
sectors = 32;
}
geom[0] = heads;
geom[1] = sectors;
geom[2] = sector_div(capacity, heads * sectors); /* cylinders */
return 0;
} /* End twl_scsi_biosparam() */
/* This is the new scsi eh reset function */
static int twl_scsi_eh_reset(struct scsi_cmnd *SCpnt)
{
TW_Device_Extension *tw_dev = NULL;
int retval = FAILED;
tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
tw_dev->num_resets++;
sdev_printk(KERN_WARNING, SCpnt->device,
"WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
/* Make sure we are not issuing an ioctl or resetting from ioctl */
mutex_lock(&tw_dev->ioctl_lock);
/* Now reset the card and some of the device extension data */
if (twl_reset_device_extension(tw_dev, 0)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "Controller reset failed during scsi host reset");
goto out;
}
retval = SUCCESS;
out:
mutex_unlock(&tw_dev->ioctl_lock);
return retval;
} /* End twl_scsi_eh_reset() */
/* This is the main scsi queue function to handle scsi opcodes */
static int twl_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
int request_id, retval;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
/* If we are resetting due to timed out ioctl, report as busy */
if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
retval = SCSI_MLQUEUE_HOST_BUSY;
goto out;
}
/* Save done function into scsi_cmnd struct */
SCpnt->scsi_done = done;
/* Get a free request id */
twl_get_request_id(tw_dev, &request_id);
/* Save the scsi command for use by the ISR */
tw_dev->srb[request_id] = SCpnt;
retval = twl_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL);
if (retval) {
tw_dev->state[request_id] = TW_S_COMPLETED;
twl_free_request_id(tw_dev, request_id);
SCpnt->result = (DID_ERROR << 16);
done(SCpnt);
retval = 0;
}
out:
return retval;
} /* End twl_scsi_queue() */
static DEF_SCSI_QCMD(twl_scsi_queue)
/* This function tells the controller to shut down */
static void __twl_shutdown(TW_Device_Extension *tw_dev)
{
/* Disable interrupts */
TWL_MASK_INTERRUPTS(tw_dev);
/* Free up the IRQ */
free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
printk(KERN_WARNING "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no);
/* Tell the card we are shutting down */
if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed");
} else {
printk(KERN_WARNING "3w-sas: Shutdown complete.\n");
}
/* Clear doorbell interrupt just before exit */
TWL_CLEAR_DB_INTERRUPT(tw_dev);
} /* End __twl_shutdown() */
/* Wrapper for __twl_shutdown */
static void twl_shutdown(struct pci_dev *pdev)
{
struct Scsi_Host *host = pci_get_drvdata(pdev);
TW_Device_Extension *tw_dev;
if (!host)
return;
tw_dev = (TW_Device_Extension *)host->hostdata;
if (tw_dev->online)
__twl_shutdown(tw_dev);
} /* End twl_shutdown() */
/* This function configures unit settings when a unit is coming on-line */
static int twl_slave_configure(struct scsi_device *sdev)
{
/* Force 60 second timeout */
blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
return 0;
} /* End twl_slave_configure() */
/* scsi_host_template initializer */
static struct scsi_host_template driver_template = {
.module = THIS_MODULE,
.name = "3w-sas",
.queuecommand = twl_scsi_queue,
.eh_host_reset_handler = twl_scsi_eh_reset,
.bios_param = twl_scsi_biosparam,
.change_queue_depth = scsi_change_queue_depth,
.can_queue = TW_Q_LENGTH-2,
.slave_configure = twl_slave_configure,
.this_id = -1,
.sg_tablesize = TW_LIBERATOR_MAX_SGL_LENGTH,
.max_sectors = TW_MAX_SECTORS,
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.shost_attrs = twl_host_attrs,
.emulated = 1,
.no_write_same = 1,
};
/* This function will probe and initialize a card */
static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
{
struct Scsi_Host *host = NULL;
TW_Device_Extension *tw_dev;
int retval = -ENODEV;
int *ptr_phycount, phycount=0;
retval = pci_enable_device(pdev);
if (retval) {
TW_PRINTK(host, TW_DRIVER, 0x17, "Failed to enable pci device");
goto out_disable_device;
}
pci_set_master(pdev);
pci_try_set_mwi(pdev);
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (retval)
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (retval) {
TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask");
retval = -ENODEV;
goto out_disable_device;
}
host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
if (!host) {
TW_PRINTK(host, TW_DRIVER, 0x19, "Failed to allocate memory for device extension");
retval = -ENOMEM;
goto out_disable_device;
}
tw_dev = shost_priv(host);
/* Save values to device extension */
tw_dev->host = host;
tw_dev->tw_pci_dev = pdev;
if (twl_initialize_device_extension(tw_dev)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension");
retval = -ENOMEM;
goto out_free_device_extension;
}
/* Request IO regions */
retval = pci_request_regions(pdev, "3w-sas");
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Failed to get mem region");
goto out_free_device_extension;
}
/* Save base address, use region 1 */
tw_dev->base_addr = pci_iomap(pdev, 1, 0);
if (!tw_dev->base_addr) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap");
retval = -ENOMEM;
goto out_release_mem_region;
}
/* Disable interrupts on the card */
TWL_MASK_INTERRUPTS(tw_dev);
/* Initialize the card */
if (twl_reset_sequence(tw_dev, 0)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe");
retval = -ENOMEM;
goto out_iounmap;
}
/* Set host specific parameters */
host->max_id = TW_MAX_UNITS;
host->max_cmd_len = TW_MAX_CDB_LEN;
host->max_lun = TW_MAX_LUNS;
host->max_channel = 0;
/* Register the card with the kernel SCSI layer */
retval = scsi_add_host(host, &pdev->dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "scsi add host failed");
goto out_iounmap;
}
pci_set_drvdata(pdev, host);
printk(KERN_WARNING "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n",
host->host_no,
(char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE,
TW_PARAM_MODEL, TW_PARAM_MODEL_LENGTH),
(u64)pci_resource_start(pdev, 1), pdev->irq);
ptr_phycount = twl_get_param(tw_dev, 2, TW_PARAM_PHY_SUMMARY_TABLE,
TW_PARAM_PHYCOUNT, TW_PARAM_PHYCOUNT_LENGTH);
if (ptr_phycount)
phycount = le32_to_cpu(*(int *)ptr_phycount);
printk(KERN_WARNING "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n",
host->host_no,
(char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE,
TW_PARAM_FWVER, TW_PARAM_FWVER_LENGTH),
(char *)twl_get_param(tw_dev, 2, TW_VERSION_TABLE,
TW_PARAM_BIOSVER, TW_PARAM_BIOSVER_LENGTH),
phycount);
/* Try to enable MSI */
if (use_msi && !pci_enable_msi(pdev))
set_bit(TW_USING_MSI, &tw_dev->flags);
/* Now setup the interrupt handler */
retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Error requesting IRQ");
goto out_remove_host;
}
twl_device_extension_list[twl_device_extension_count] = tw_dev;
twl_device_extension_count++;
/* Re-enable interrupts on the card */
TWL_UNMASK_INTERRUPTS(tw_dev);
/* Finally, scan the host */
scsi_scan_host(host);
/* Add sysfs binary files */
if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Failed to create sysfs binary file: 3ware_aen_read");
if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Failed to create sysfs binary file: 3ware_compat_info");
if (twl_major == -1) {
if ((twl_major = register_chrdev (0, "twl", &twl_fops)) < 0)
TW_PRINTK(host, TW_DRIVER, 0x22, "Failed to register character device");
}
tw_dev->online = 1;
return 0;
out_remove_host:
if (test_bit(TW_USING_MSI, &tw_dev->flags))
pci_disable_msi(pdev);
scsi_remove_host(host);
out_iounmap:
iounmap(tw_dev->base_addr);
out_release_mem_region:
pci_release_regions(pdev);
out_free_device_extension:
twl_free_device_extension(tw_dev);
scsi_host_put(host);
out_disable_device:
pci_disable_device(pdev);
return retval;
} /* End twl_probe() */
/* This function is called to remove a device */
static void twl_remove(struct pci_dev *pdev)
{
struct Scsi_Host *host = pci_get_drvdata(pdev);
TW_Device_Extension *tw_dev;
if (!host)
return;
tw_dev = (TW_Device_Extension *)host->hostdata;
if (!tw_dev->online)
return;
/* Remove sysfs binary files */
sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr);
sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr);
scsi_remove_host(tw_dev->host);
/* Unregister character device */
if (twl_major >= 0) {
unregister_chrdev(twl_major, "twl");
twl_major = -1;
}
/* Shutdown the card */
__twl_shutdown(tw_dev);
/* Disable MSI if enabled */
if (test_bit(TW_USING_MSI, &tw_dev->flags))
pci_disable_msi(pdev);
/* Free IO remapping */
iounmap(tw_dev->base_addr);
/* Free up the mem region */
pci_release_regions(pdev);
/* Free up device extension resources */
twl_free_device_extension(tw_dev);
scsi_host_put(tw_dev->host);
pci_disable_device(pdev);
twl_device_extension_count--;
} /* End twl_remove() */
/* This function is called on PCI suspend */
static int __maybe_unused twl_suspend(struct device *dev)
{
struct Scsi_Host *host = dev_get_drvdata(dev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
printk(KERN_WARNING "3w-sas: Suspending host %d.\n", tw_dev->host->host_no);
/* Disable interrupts */
TWL_MASK_INTERRUPTS(tw_dev);
free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
/* Tell the card we are shutting down */
if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend");
} else {
printk(KERN_WARNING "3w-sas: Suspend complete.\n");
}
/* Clear doorbell interrupt */
TWL_CLEAR_DB_INTERRUPT(tw_dev);
return 0;
} /* End twl_suspend() */
/* This function is called on PCI resume */
static int __maybe_unused twl_resume(struct device *dev)
{
int retval = 0;
struct pci_dev *pdev = to_pci_dev(dev);
struct Scsi_Host *host = pci_get_drvdata(pdev);
TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no);
pci_try_set_mwi(pdev);
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (retval)
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (retval) {
TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume");
retval = -ENODEV;
goto out_disable_device;
}
/* Initialize the card */
if (twl_reset_sequence(tw_dev, 0)) {
retval = -ENODEV;
goto out_disable_device;
}
/* Now setup the interrupt handler */
retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Error requesting IRQ during resume");
retval = -ENODEV;
goto out_disable_device;
}
/* Now enable MSI if enabled */
if (test_bit(TW_USING_MSI, &tw_dev->flags))
pci_enable_msi(pdev);
/* Re-enable interrupts on the card */
TWL_UNMASK_INTERRUPTS(tw_dev);
printk(KERN_WARNING "3w-sas: Resume complete.\n");
return 0;
out_disable_device:
scsi_remove_host(host);
return retval;
} /* End twl_resume() */
/* PCI Devices supported by this driver */
static struct pci_device_id twl_pci_tbl[] = {
{ PCI_VDEVICE(3WARE, PCI_DEVICE_ID_3WARE_9750) },
{ }
};
MODULE_DEVICE_TABLE(pci, twl_pci_tbl);
static SIMPLE_DEV_PM_OPS(twl_pm_ops, twl_suspend, twl_resume);
/* pci_driver initializer */
static struct pci_driver twl_driver = {
.name = "3w-sas",
.id_table = twl_pci_tbl,
.probe = twl_probe,
.remove = twl_remove,
.driver.pm = &twl_pm_ops,
.shutdown = twl_shutdown
};
/* This function is called on driver initialization */
static int __init twl_init(void)
{
printk(KERN_INFO "LSI 3ware SAS/SATA-RAID Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
return pci_register_driver(&twl_driver);
} /* End twl_init() */
/* This function is called on driver exit */
static void __exit twl_exit(void)
{
pci_unregister_driver(&twl_driver);
} /* End twl_exit() */
module_init(twl_init);
module_exit(twl_exit);