linux/drivers/firmware/Makefile

32 lines
1.1 KiB
Makefile
Raw Normal View History

#
# Makefile for the linux kernel.
#
obj-$(CONFIG_ARM_PSCI_FW) += psci.o
drivers: psci: PSCI checker module On arm and arm64, PSCI is one of the possible firmware interfaces used for power management. This includes both turning CPUs on and off, and suspending them (entering idle states). This patch adds a PSCI checker module that enables basic testing of PSCI operations during startup. There are two main tests: CPU hotplugging and suspending. In the hotplug tests, the hotplug API is used to turn off and on again all CPUs in the system, and then all CPUs in each cluster, checking the consistency of the return codes. In the suspend tests, a high-priority thread is created on each core and uses low-level cpuidle functionalities to enter suspend, in all the possible states and multiple times. This should allow a maximum number of CPUs to enter the same sleep state at the same or slightly different time. In essence, the suspend tests use a principle similar to that of the intel_powerclamp driver (drivers/thermal/intel_powerclamp.c), but the threads are only kept for the duration of the test (they are already gone when userspace is started) and it does not require to stop/start the tick. While in theory power management PSCI functions (CPU_{ON,OFF,SUSPEND}) could be directly called, this proved too difficult as it would imply the duplication of all the logic used by the kernel to allow for a clean shutdown/bringup/suspend of the CPU (the deepest sleep states implying potentially the shutdown of the CPU). Note that this file cannot be compiled as a loadable module, since it uses a number of non-exported identifiers (essentially for PSCI-specific checks and direct use of cpuidle) and relies on the absence of userspace to avoid races when calling hotplug and cpuidle functions. For now at least, CONFIG_PSCI_CHECKER is mutually exclusive with CONFIG_TORTURE_TEST, because torture tests may also use hotplug and cause false positives in the hotplug tests. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kevin Hilman <khilman@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: James Morse <james.morse@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> [torture test config] Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> [lpieralisi: added cpuidle locking, reworded commit log/kconfig entry] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-08 17:55:46 +00:00
obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o
obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
obj-$(CONFIG_DMI) += dmi_scan.o
obj-$(CONFIG_DMI_SYSFS) += dmi-sysfs.o
obj-$(CONFIG_EDD) += edd.o
obj-$(CONFIG_EFI_PCDP) += pcdp.o
obj-$(CONFIG_DELL_RBU) += dell_rbu.o
obj-$(CONFIG_DCDBAS) += dcdbas.o
DMI-based module autoloading The patch below adds DMI/SMBIOS based module autoloading to the Linux kernel. The idea is to load laptop drivers automatically (and other drivers which cannot be autoloaded otherwise), based on the DMI system identification information of the BIOS. Right now most distros manually try to load all available laptop drivers on bootup in the hope that at least one of them loads successfully. This patch does away with all that, and uses udev to automatically load matching drivers on the right machines. Basically the patch just exports the DMI information that has been parsed by the kernel anyway to userspace via a sysfs device /sys/class/dmi/id and makes sure that proper modalias attributes are available. Besides adding the "modalias" attribute it also adds attributes for a few other DMI fields which might be useful for writing udev rules. This patch is not an attempt to export the entire DMI/SMBIOS data to userspace. We already have "dmidecode" which parses the complete DMI info from userspace. The purpose of this patch is machine model identification and good udev integration. To take advantage of DMI based module autoloading, a driver should export one or more MODULE_ALIAS fields similar to these: MODULE_ALIAS("dmi:*:svnMICRO-STARINT'LCO.,LTD:pnMS-1013:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1058:pvr0581:rvnMSI:rnMS-1058:*:ct10:*"); MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1412:*:rvnMSI:rnMS-1412:*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); MODULE_ALIAS("dmi:*:svnNOTEBOOK:pnSAM2000:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); These lines are specific to my msi-laptop.c driver. They are basically just a concatenation of a few carefully selected DMI fields with all potentially bad characters stripped. Besides laptop drivers, modules like "hdaps", the i2c modules and the hwmon modules are good candidates for "dmi:" MODULE_ALIAS lines. Besides merely exporting the DMI data via sysfs the patch adds support for a few more DMI fields. Especially the CHASSIS fields are very useful to identify different laptop modules. The patch also adds working MODULE_ALIAS lines to my msi-laptop.c driver. I'd like to thank Kay Sievers for helping me to clean up this patch for posting it on lkml. Patch is against Linus' current GIT HEAD. Should probably apply to older kernels as well without modification. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-08 20:07:02 +00:00
obj-$(CONFIG_DMIID) += dmi-id.o
Firmware: add iSCSI iBFT Support Add /sysfs/firmware/ibft/[initiator|targetX|ethernetX] directories along with text properties which export the the iSCSI Boot Firmware Table (iBFT) structure. What is iSCSI Boot Firmware Table? It is a mechanism for the iSCSI tools to extract from the machine NICs the iSCSI connection information so that they can automagically mount the iSCSI share/target. Currently the iSCSI information is hard-coded in the initrd. The /sysfs entries are read-only one-name-and-value fields. The usual set of data exposed is: # for a in `find /sys/firmware/ibft/ -type f -print`; do echo -n "$a: "; cat $a; done /sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb /sys/firmware/ibft/target0/nic-assoc: 0 /sys/firmware/ibft/target0/chap-type: 0 /sys/firmware/ibft/target0/lun: 00000000 /sys/firmware/ibft/target0/port: 3260 /sys/firmware/ibft/target0/ip-addr: 192.168.79.116 /sys/firmware/ibft/target0/flags: 3 /sys/firmware/ibft/target0/index: 0 /sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01 /sys/firmware/ibft/ethernet0/vlan: 0 /sys/firmware/ibft/ethernet0/gateway: 192.168.79.254 /sys/firmware/ibft/ethernet0/origin: 0 /sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0 /sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41 /sys/firmware/ibft/ethernet0/flags: 7 /sys/firmware/ibft/ethernet0/index: 0 /sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator /sys/firmware/ibft/initiator/flags: 3 /sys/firmware/ibft/initiator/index: 0 For full details of the IBFT structure please take a look at: ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf [akpm@linux-foundation.org: fix build] Signed-off-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Peter Jones <pjones@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-10 02:50:41 +00:00
obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 11:12:54 +00:00
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o
obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
obj-$(CONFIG_QCOM_SCM_64) += qcom_scm-64.o
obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o
CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-y += broadcom/
obj-y += meson/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
obj-$(CONFIG_EFI) += efi/
obj-$(CONFIG_UEFI_CPER) += efi/
obj-y += tegra/