linux/drivers/media/tuners/tda18271.h

140 lines
3.7 KiB
C
Raw Normal View History

/*
tda18271.h - header for the Philips / NXP TDA18271 silicon tuner
Copyright (C) 2007, 2008 Michael Krufky <mkrufky@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __TDA18271_H__
#define __TDA18271_H__
#include <linux/i2c.h>
#include "dvb_frontend.h"
struct tda18271_std_map_item {
u16 if_freq;
/* EP3[4:3] */
unsigned int agc_mode:2;
/* EP3[2:0] */
unsigned int std:3;
/* EP4[7] */
unsigned int fm_rfn:1;
/* EP4[4:2] */
unsigned int if_lvl:3;
/* EB22[6:0] */
unsigned int rfagc_top:7;
};
struct tda18271_std_map {
struct tda18271_std_map_item fm_radio;
struct tda18271_std_map_item atv_b;
struct tda18271_std_map_item atv_dk;
struct tda18271_std_map_item atv_gh;
struct tda18271_std_map_item atv_i;
struct tda18271_std_map_item atv_l;
struct tda18271_std_map_item atv_lc;
struct tda18271_std_map_item atv_mn;
struct tda18271_std_map_item atsc_6;
struct tda18271_std_map_item dvbt_6;
struct tda18271_std_map_item dvbt_7;
struct tda18271_std_map_item dvbt_8;
struct tda18271_std_map_item qam_6;
struct tda18271_std_map_item qam_7;
struct tda18271_std_map_item qam_8;
};
enum tda18271_role {
TDA18271_MASTER = 0,
TDA18271_SLAVE,
};
enum tda18271_i2c_gate {
TDA18271_GATE_AUTO = 0,
TDA18271_GATE_ANALOG,
TDA18271_GATE_DIGITAL,
};
enum tda18271_output_options {
/* slave tuner output & loop thru & xtal oscillator always on */
TDA18271_OUTPUT_LT_XT_ON = 0,
/* slave tuner output loop thru off */
TDA18271_OUTPUT_LT_OFF = 1,
/* xtal oscillator off */
TDA18271_OUTPUT_XT_OFF = 2,
};
enum tda18271_small_i2c {
TDA18271_39_BYTE_CHUNK_INIT = 0,
TDA18271_16_BYTE_CHUNK_INIT = 16,
TDA18271_08_BYTE_CHUNK_INIT = 8,
TDA18271_03_BYTE_CHUNK_INIT = 3,
};
struct tda18271_config {
/* override default if freq / std settings (optional) */
struct tda18271_std_map *std_map;
/* master / slave tuner: master uses main pll, slave uses cal pll */
enum tda18271_role role;
/* use i2c gate provided by analog or digital demod */
enum tda18271_i2c_gate gate;
/* output options that can be disabled */
enum tda18271_output_options output_opt;
/* some i2c providers can't write all 39 registers at once */
enum tda18271_small_i2c small_i2c;
/* force rf tracking filter calibration on startup */
unsigned int rf_cal_on_startup:1;
/* prevent any register access during attach(),
* delaying both IR & RF calibration until init()
* module option 'cal' overrides this delay */
unsigned int delay_cal:1;
/* interface to saa713x / tda829x */
unsigned int config;
};
#define TDA18271_CALLBACK_CMD_AGC_ENABLE 0
enum tda18271_mode {
TDA18271_ANALOG = 0,
TDA18271_DIGITAL,
};
[media] Add and use IS_REACHABLE macro In the media drivers, the v4l2 core knows about all submodules and calls into them from a common function. However this cannot work if the modules that get called are loadable and the core is built-in. In that case we get drivers/built-in.o: In function `set_type': drivers/media/v4l2-core/tuner-core.c:301: undefined reference to `tea5767_attach' drivers/media/v4l2-core/tuner-core.c:307: undefined reference to `tea5761_attach' drivers/media/v4l2-core/tuner-core.c:349: undefined reference to `tda9887_attach' drivers/media/v4l2-core/tuner-core.c:405: undefined reference to `xc4000_attach' This was working previously, until the IS_ENABLED() macro was used to replace the construct like #if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) with the difference that the new code no longer checks whether it is being built as a loadable module itself. To fix this, this new patch adds an 'IS_REACHABLE' macro, which evaluates true in exactly the condition that was used previously. The downside of this is that this trades an obvious link error for a more subtle runtime failure, but it is clear that the change that introduced the link error was unintentional and it seems better to revert it for now. Also, a similar change was originally created by Trent Piepho and then reverted by teh change to the IS_ENABLED macro. Ideally Kconfig would be used to avoid the case of a broken dependency, or the code restructured in a way to turn around the dependency, but either way would require much larger changes here. Fixes: 7b34be71db53 ("[media] use IS_ENABLED() macro") See-also: c5dec9fb248e ("V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-18 17:12:42 +00:00
#if IS_REACHABLE(CONFIG_MEDIA_TUNER_TDA18271)
extern struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
struct i2c_adapter *i2c,
struct tda18271_config *cfg);
#else
static inline struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe,
u8 addr,
struct i2c_adapter *i2c,
struct tda18271_config *cfg)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
#endif
#endif /* __TDA18271_H__ */