linux/arch/x86/kernel/traps.c

800 lines
21 KiB
C
Raw Normal View History

/*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
*
* Pentium III FXSR, SSE support
* Gareth Hughes <gareth@valinux.com>, May 2000
*/
/*
* Handle hardware traps and faults.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/context_tracking.h>
#include <linux/interrupt.h>
#include <linux/kallsyms.h>
#include <linux/spinlock.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <linux/kdebug.h>
#include <linux/kgdb.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/ptrace.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/kexec.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/bug.h>
#include <linux/nmi.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/io.h>
#ifdef CONFIG_EISA
#include <linux/ioport.h>
#include <linux/eisa.h>
#endif
#if defined(CONFIG_EDAC)
#include <linux/edac.h>
#endif
#include <asm/kmemcheck.h>
#include <asm/stacktrace.h>
#include <asm/processor.h>
#include <asm/debugreg.h>
#include <linux/atomic.h>
#include <asm/ftrace.h>
#include <asm/traps.h>
#include <asm/desc.h>
#include <asm/i387.h>
#include <asm/fpu-internal.h>
#include <asm/mce.h>
#include <asm/fixmap.h>
#include <asm/mach_traps.h>
kprobes/x86: Call out into INT3 handler directly instead of using notifier In fd4363fff3d96 ("x86: Introduce int3 (breakpoint)-based instruction patching"), the mechanism that was introduced for notifying alternatives code from int3 exception handler that and exception occured was die_notifier. This is however problematic, as early code might be using jump labels even before the notifier registration has been performed, which will then lead to an oops due to unhandled exception. One of such occurences has been encountered by Fengguang: int3: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc1-01429-g04bf576 #8 task: ffff88000da1b040 ti: ffff88000da1c000 task.ti: ffff88000da1c000 RIP: 0010:[<ffffffff811098cc>] [<ffffffff811098cc>] ttwu_do_wakeup+0x28/0x225 RSP: 0000:ffff88000dd03f10 EFLAGS: 00000006 RAX: 0000000000000000 RBX: ffff88000dd12940 RCX: ffffffff81769c40 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88000dd03f28 R08: ffffffff8176a8c0 R09: 0000000000000002 R10: ffffffff810ff484 R11: ffff88000dd129e8 R12: ffff88000dbc90c0 R13: ffff88000dbc90c0 R14: ffff88000da1dfd8 R15: ffff88000da1dfd8 FS: 0000000000000000(0000) GS:ffff88000dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000ffffffff CR3: 0000000001c88000 CR4: 00000000000006e0 Stack: ffff88000dd12940 ffff88000dbc90c0 ffff88000da1dfd8 ffff88000dd03f48 ffffffff81109e2b ffff88000dd12940 0000000000000000 ffff88000dd03f68 ffffffff81109e9e 0000000000000000 0000000000012940 ffff88000dd03f98 Call Trace: <IRQ> [<ffffffff81109e2b>] ttwu_do_activate.constprop.56+0x6d/0x79 [<ffffffff81109e9e>] sched_ttwu_pending+0x67/0x84 [<ffffffff8110c845>] scheduler_ipi+0x15a/0x2b0 [<ffffffff8104dfb4>] smp_reschedule_interrupt+0x38/0x41 [<ffffffff8173bf5d>] reschedule_interrupt+0x6d/0x80 <EOI> [<ffffffff810ff484>] ? __atomic_notifier_call_chain+0x5/0xc1 [<ffffffff8105cc30>] ? native_safe_halt+0xd/0x16 [<ffffffff81015f10>] default_idle+0x147/0x282 [<ffffffff81017026>] arch_cpu_idle+0x3d/0x5d [<ffffffff81127d6a>] cpu_idle_loop+0x46d/0x5db [<ffffffff81127f5c>] cpu_startup_entry+0x84/0x84 [<ffffffff8104f4f8>] start_secondary+0x3c8/0x3d5 [...] Fix this by directly calling poke_int3_handler() from the int3 exception handler (analogically to what ftrace has been doing already), instead of relying on notifier, registration of which might not have yet been finalized by the time of the first trap. Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307231007490.14024@pobox.suse.cz Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-23 08:09:28 +00:00
#include <asm/alternative.h>
#ifdef CONFIG_X86_64
#include <asm/x86_init.h>
#include <asm/pgalloc.h>
#include <asm/proto.h>
/* No need to be aligned, but done to keep all IDTs defined the same way. */
gate_desc debug_idt_table[NR_VECTORS] __page_aligned_bss;
#else
#include <asm/processor-flags.h>
#include <asm/setup.h>
asmlinkage int system_call(void);
#endif
/* Must be page-aligned because the real IDT is used in a fixmap. */
gate_desc idt_table[NR_VECTORS] __page_aligned_bss;
DECLARE_BITMAP(used_vectors, NR_VECTORS);
EXPORT_SYMBOL_GPL(used_vectors);
static inline void conditional_sti(struct pt_regs *regs)
{
if (regs->flags & X86_EFLAGS_IF)
local_irq_enable();
}
static inline void preempt_conditional_sti(struct pt_regs *regs)
{
inc_preempt_count();
if (regs->flags & X86_EFLAGS_IF)
local_irq_enable();
}
static inline void conditional_cli(struct pt_regs *regs)
{
if (regs->flags & X86_EFLAGS_IF)
local_irq_disable();
}
static inline void preempt_conditional_cli(struct pt_regs *regs)
{
if (regs->flags & X86_EFLAGS_IF)
local_irq_disable();
dec_preempt_count();
}
static int __kprobes
do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str,
struct pt_regs *regs, long error_code)
{
#ifdef CONFIG_X86_32
if (regs->flags & X86_VM_MASK) {
/*
* Traps 0, 1, 3, 4, and 5 should be forwarded to vm86.
* On nmi (interrupt 2), do_trap should not be called.
*/
if (trapnr < X86_TRAP_UD) {
if (!handle_vm86_trap((struct kernel_vm86_regs *) regs,
error_code, trapnr))
return 0;
}
return -1;
}
#endif
if (!user_mode(regs)) {
if (!fixup_exception(regs)) {
tsk->thread.error_code = error_code;
tsk->thread.trap_nr = trapnr;
die(str, regs, error_code);
}
return 0;
}
return -1;
}
static void __kprobes
do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
long error_code, siginfo_t *info)
{
struct task_struct *tsk = current;
if (!do_trap_no_signal(tsk, trapnr, str, regs, error_code))
return;
/*
* We want error_code and trap_nr set for userspace faults and
* kernelspace faults which result in die(), but not
* kernelspace faults which are fixed up. die() gives the
* process no chance to handle the signal and notice the
* kernel fault information, so that won't result in polluting
* the information about previously queued, but not yet
* delivered, faults. See also do_general_protection below.
*/
tsk->thread.error_code = error_code;
tsk->thread.trap_nr = trapnr;
#ifdef CONFIG_X86_64
if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
printk_ratelimit()) {
pr_info("%s[%d] trap %s ip:%lx sp:%lx error:%lx",
tsk->comm, tsk->pid, str,
regs->ip, regs->sp, error_code);
print_vma_addr(" in ", regs->ip);
pr_cont("\n");
}
#endif
if (info)
force_sig_info(signr, info, tsk);
else
force_sig(signr, tsk);
}
#define DO_ERROR(trapnr, signr, str, name) \
dotraplinkage void do_##name(struct pt_regs *regs, long error_code) \
{ \
2013-02-24 00:19:14 +00:00
enum ctx_state prev_state; \
\
prev_state = exception_enter(); \
if (notify_die(DIE_TRAP, str, regs, error_code, \
trapnr, signr) == NOTIFY_STOP) { \
2013-02-24 00:19:14 +00:00
exception_exit(prev_state); \
return; \
} \
conditional_sti(regs); \
do_trap(trapnr, signr, str, regs, error_code, NULL); \
2013-02-24 00:19:14 +00:00
exception_exit(prev_state); \
}
#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
dotraplinkage void do_##name(struct pt_regs *regs, long error_code) \
{ \
siginfo_t info; \
2013-02-24 00:19:14 +00:00
enum ctx_state prev_state; \
\
info.si_signo = signr; \
info.si_errno = 0; \
info.si_code = sicode; \
info.si_addr = (void __user *)siaddr; \
2013-02-24 00:19:14 +00:00
prev_state = exception_enter(); \
if (notify_die(DIE_TRAP, str, regs, error_code, \
trapnr, signr) == NOTIFY_STOP) { \
2013-02-24 00:19:14 +00:00
exception_exit(prev_state); \
return; \
} \
conditional_sti(regs); \
do_trap(trapnr, signr, str, regs, error_code, &info); \
2013-02-24 00:19:14 +00:00
exception_exit(prev_state); \
}
DO_ERROR_INFO(X86_TRAP_DE, SIGFPE, "divide error", divide_error, FPE_INTDIV,
regs->ip)
DO_ERROR(X86_TRAP_OF, SIGSEGV, "overflow", overflow)
DO_ERROR(X86_TRAP_BR, SIGSEGV, "bounds", bounds)
DO_ERROR_INFO(X86_TRAP_UD, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN,
regs->ip)
DO_ERROR(X86_TRAP_OLD_MF, SIGFPE, "coprocessor segment overrun",
coprocessor_segment_overrun)
DO_ERROR(X86_TRAP_TS, SIGSEGV, "invalid TSS", invalid_TSS)
DO_ERROR(X86_TRAP_NP, SIGBUS, "segment not present", segment_not_present)
#ifdef CONFIG_X86_32
DO_ERROR(X86_TRAP_SS, SIGBUS, "stack segment", stack_segment)
#endif
DO_ERROR_INFO(X86_TRAP_AC, SIGBUS, "alignment check", alignment_check,
BUS_ADRALN, 0)
#ifdef CONFIG_X86_64
/* Runs on IST stack */
dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
{
2013-02-24 00:19:14 +00:00
enum ctx_state prev_state;
prev_state = exception_enter();
if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
X86_TRAP_SS, SIGBUS) != NOTIFY_STOP) {
preempt_conditional_sti(regs);
do_trap(X86_TRAP_SS, SIGBUS, "stack segment", regs, error_code, NULL);
preempt_conditional_cli(regs);
}
2013-02-24 00:19:14 +00:00
exception_exit(prev_state);
}
dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
{
static const char str[] = "double fault";
struct task_struct *tsk = current;
2013-02-24 00:19:14 +00:00
exception_enter();
/* Return not checked because double check cannot be ignored */
notify_die(DIE_TRAP, str, regs, error_code, X86_TRAP_DF, SIGSEGV);
tsk->thread.error_code = error_code;
tsk->thread.trap_nr = X86_TRAP_DF;
#ifdef CONFIG_DOUBLEFAULT
df_debug(regs, error_code);
#endif
/*
* This is always a kernel trap and never fixable (and thus must
* never return).
*/
for (;;)
die(str, regs, error_code);
}
#endif
dotraplinkage void __kprobes
do_general_protection(struct pt_regs *regs, long error_code)
{
struct task_struct *tsk;
2013-02-24 00:19:14 +00:00
enum ctx_state prev_state;
2013-02-24 00:19:14 +00:00
prev_state = exception_enter();
conditional_sti(regs);
#ifdef CONFIG_X86_32
if (regs->flags & X86_VM_MASK) {
local_irq_enable();
handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
goto exit;
}
#endif
tsk = current;
if (!user_mode(regs)) {
if (fixup_exception(regs))
goto exit;
tsk->thread.error_code = error_code;
tsk->thread.trap_nr = X86_TRAP_GP;
if (notify_die(DIE_GPF, "general protection fault", regs, error_code,
X86_TRAP_GP, SIGSEGV) != NOTIFY_STOP)
die("general protection fault", regs, error_code);
goto exit;
}
tsk->thread.error_code = error_code;
tsk->thread.trap_nr = X86_TRAP_GP;
if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
printk_ratelimit()) {
pr_info("%s[%d] general protection ip:%lx sp:%lx error:%lx",
tsk->comm, task_pid_nr(tsk),
regs->ip, regs->sp, error_code);
print_vma_addr(" in ", regs->ip);
pr_cont("\n");
}
force_sig(SIGSEGV, tsk);
exit:
2013-02-24 00:19:14 +00:00
exception_exit(prev_state);
}
/* May run on IST stack. */
dotraplinkage void __kprobes notrace do_int3(struct pt_regs *regs, long error_code)
{
2013-02-24 00:19:14 +00:00
enum ctx_state prev_state;
#ifdef CONFIG_DYNAMIC_FTRACE
/*
* ftrace must be first, everything else may cause a recursive crash.
* See note by declaration of modifying_ftrace_code in ftrace.c
*/
if (unlikely(atomic_read(&modifying_ftrace_code)) &&
ftrace_int3_handler(regs))
return;
#endif
kprobes/x86: Call out into INT3 handler directly instead of using notifier In fd4363fff3d96 ("x86: Introduce int3 (breakpoint)-based instruction patching"), the mechanism that was introduced for notifying alternatives code from int3 exception handler that and exception occured was die_notifier. This is however problematic, as early code might be using jump labels even before the notifier registration has been performed, which will then lead to an oops due to unhandled exception. One of such occurences has been encountered by Fengguang: int3: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc1-01429-g04bf576 #8 task: ffff88000da1b040 ti: ffff88000da1c000 task.ti: ffff88000da1c000 RIP: 0010:[<ffffffff811098cc>] [<ffffffff811098cc>] ttwu_do_wakeup+0x28/0x225 RSP: 0000:ffff88000dd03f10 EFLAGS: 00000006 RAX: 0000000000000000 RBX: ffff88000dd12940 RCX: ffffffff81769c40 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88000dd03f28 R08: ffffffff8176a8c0 R09: 0000000000000002 R10: ffffffff810ff484 R11: ffff88000dd129e8 R12: ffff88000dbc90c0 R13: ffff88000dbc90c0 R14: ffff88000da1dfd8 R15: ffff88000da1dfd8 FS: 0000000000000000(0000) GS:ffff88000dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000ffffffff CR3: 0000000001c88000 CR4: 00000000000006e0 Stack: ffff88000dd12940 ffff88000dbc90c0 ffff88000da1dfd8 ffff88000dd03f48 ffffffff81109e2b ffff88000dd12940 0000000000000000 ffff88000dd03f68 ffffffff81109e9e 0000000000000000 0000000000012940 ffff88000dd03f98 Call Trace: <IRQ> [<ffffffff81109e2b>] ttwu_do_activate.constprop.56+0x6d/0x79 [<ffffffff81109e9e>] sched_ttwu_pending+0x67/0x84 [<ffffffff8110c845>] scheduler_ipi+0x15a/0x2b0 [<ffffffff8104dfb4>] smp_reschedule_interrupt+0x38/0x41 [<ffffffff8173bf5d>] reschedule_interrupt+0x6d/0x80 <EOI> [<ffffffff810ff484>] ? __atomic_notifier_call_chain+0x5/0xc1 [<ffffffff8105cc30>] ? native_safe_halt+0xd/0x16 [<ffffffff81015f10>] default_idle+0x147/0x282 [<ffffffff81017026>] arch_cpu_idle+0x3d/0x5d [<ffffffff81127d6a>] cpu_idle_loop+0x46d/0x5db [<ffffffff81127f5c>] cpu_startup_entry+0x84/0x84 [<ffffffff8104f4f8>] start_secondary+0x3c8/0x3d5 [...] Fix this by directly calling poke_int3_handler() from the int3 exception handler (analogically to what ftrace has been doing already), instead of relying on notifier, registration of which might not have yet been finalized by the time of the first trap. Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307231007490.14024@pobox.suse.cz Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-23 08:09:28 +00:00
if (poke_int3_handler(regs))
return;
2013-02-24 00:19:14 +00:00
prev_state = exception_enter();
#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
if (kgdb_ll_trap(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
SIGTRAP) == NOTIFY_STOP)
goto exit;
#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
if (notify_die(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
SIGTRAP) == NOTIFY_STOP)
goto exit;
x86: Add counter when debug stack is used with interrupts enabled Mathieu Desnoyers pointed out a case that can cause issues with NMIs running on the debug stack: int3 -> interrupt -> NMI -> int3 Because the interrupt changes the stack, the NMI will not see that it preempted the debug stack. Looking deeper at this case, interrupts only happen when the int3 is from userspace or in an a location in the exception table (fixup). userspace -> int3 -> interurpt -> NMI -> int3 All other int3s that happen in the kernel should be processed without ever enabling interrupts, as the do_trap() call will panic the kernel if it is called to process any other location within the kernel. Adding a counter around the sections that enable interrupts while using the debug stack allows the NMI to also check that case. If the NMI sees that it either interrupted a task using the debug stack or the debug counter is non-zero, then it will have to change the IDT table to make the int3 not change stacks (which will corrupt the stack if it does). Note, I had to move the debug_usage functions out of processor.h and into debugreg.h because of the static inlined functions to inc and dec the debug_usage counter. __get_cpu_var() requires smp.h which includes processor.h, and would fail to build. Link: http://lkml.kernel.org/r/1323976535.23971.112.camel@gandalf.stny.rr.com Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Turner <pjt@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-16 16:43:02 +00:00
/*
* Let others (NMI) know that the debug stack is in use
* as we may switch to the interrupt stack.
*/
debug_stack_usage_inc();
preempt_conditional_sti(regs);
do_trap(X86_TRAP_BP, SIGTRAP, "int3", regs, error_code, NULL);
preempt_conditional_cli(regs);
x86: Add counter when debug stack is used with interrupts enabled Mathieu Desnoyers pointed out a case that can cause issues with NMIs running on the debug stack: int3 -> interrupt -> NMI -> int3 Because the interrupt changes the stack, the NMI will not see that it preempted the debug stack. Looking deeper at this case, interrupts only happen when the int3 is from userspace or in an a location in the exception table (fixup). userspace -> int3 -> interurpt -> NMI -> int3 All other int3s that happen in the kernel should be processed without ever enabling interrupts, as the do_trap() call will panic the kernel if it is called to process any other location within the kernel. Adding a counter around the sections that enable interrupts while using the debug stack allows the NMI to also check that case. If the NMI sees that it either interrupted a task using the debug stack or the debug counter is non-zero, then it will have to change the IDT table to make the int3 not change stacks (which will corrupt the stack if it does). Note, I had to move the debug_usage functions out of processor.h and into debugreg.h because of the static inlined functions to inc and dec the debug_usage counter. __get_cpu_var() requires smp.h which includes processor.h, and would fail to build. Link: http://lkml.kernel.org/r/1323976535.23971.112.camel@gandalf.stny.rr.com Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Turner <pjt@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-16 16:43:02 +00:00
debug_stack_usage_dec();
exit:
2013-02-24 00:19:14 +00:00
exception_exit(prev_state);
}
#ifdef CONFIG_X86_64
/*
* Help handler running on IST stack to switch back to user stack
* for scheduling or signal handling. The actual stack switch is done in
* entry.S
*/
asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
{
struct pt_regs *regs = eregs;
/* Did already sync */
if (eregs == (struct pt_regs *)eregs->sp)
;
/* Exception from user space */
else if (user_mode(eregs))
regs = task_pt_regs(current);
/*
* Exception from kernel and interrupts are enabled. Move to
* kernel process stack.
*/
else if (eregs->flags & X86_EFLAGS_IF)
regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
if (eregs != regs)
*regs = *eregs;
return regs;
}
#endif
/*
* Our handling of the processor debug registers is non-trivial.
* We do not clear them on entry and exit from the kernel. Therefore
* it is possible to get a watchpoint trap here from inside the kernel.
* However, the code in ./ptrace.c has ensured that the user can
* only set watchpoints on userspace addresses. Therefore the in-kernel
* watchpoint trap can only occur in code which is reading/writing
* from user space. Such code must not hold kernel locks (since it
* can equally take a page fault), therefore it is safe to call
* force_sig_info even though that claims and releases locks.
*
* Code in ./signal.c ensures that the debug control register
* is restored before we deliver any signal, and therefore that
* user code runs with the correct debug control register even though
* we clear it here.
*
* Being careful here means that we don't have to be as careful in a
* lot of more complicated places (task switching can be a bit lazy
* about restoring all the debug state, and ptrace doesn't have to
* find every occurrence of the TF bit that could be saved away even
* by user code)
*
* May run on IST stack.
*/
dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
{
struct task_struct *tsk = current;
2013-02-24 00:19:14 +00:00
enum ctx_state prev_state;
int user_icebp = 0;
unsigned long dr6;
int si_code;
2013-02-24 00:19:14 +00:00
prev_state = exception_enter();
get_debugreg(dr6, 6);
/* Filter out all the reserved bits which are preset to 1 */
dr6 &= ~DR6_RESERVED;
/*
* If dr6 has no reason to give us about the origin of this trap,
* then it's very likely the result of an icebp/int01 trap.
* User wants a sigtrap for that.
*/
if (!dr6 && user_mode(regs))
user_icebp = 1;
/* Catch kmemcheck conditions first of all! */
if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
goto exit;
/* DR6 may or may not be cleared by the CPU */
set_debugreg(0, 6);
/*
* The processor cleared BTF, so don't mark that we need it set.
*/
clear_tsk_thread_flag(tsk, TIF_BLOCKSTEP);
/* Store the virtualized DR6 value */
tsk->thread.debugreg6 = dr6;
if (notify_die(DIE_DEBUG, "debug", regs, (long)&dr6, error_code,
SIGTRAP) == NOTIFY_STOP)
goto exit;
x86: Add counter when debug stack is used with interrupts enabled Mathieu Desnoyers pointed out a case that can cause issues with NMIs running on the debug stack: int3 -> interrupt -> NMI -> int3 Because the interrupt changes the stack, the NMI will not see that it preempted the debug stack. Looking deeper at this case, interrupts only happen when the int3 is from userspace or in an a location in the exception table (fixup). userspace -> int3 -> interurpt -> NMI -> int3 All other int3s that happen in the kernel should be processed without ever enabling interrupts, as the do_trap() call will panic the kernel if it is called to process any other location within the kernel. Adding a counter around the sections that enable interrupts while using the debug stack allows the NMI to also check that case. If the NMI sees that it either interrupted a task using the debug stack or the debug counter is non-zero, then it will have to change the IDT table to make the int3 not change stacks (which will corrupt the stack if it does). Note, I had to move the debug_usage functions out of processor.h and into debugreg.h because of the static inlined functions to inc and dec the debug_usage counter. __get_cpu_var() requires smp.h which includes processor.h, and would fail to build. Link: http://lkml.kernel.org/r/1323976535.23971.112.camel@gandalf.stny.rr.com Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Turner <pjt@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-16 16:43:02 +00:00
/*
* Let others (NMI) know that the debug stack is in use
* as we may switch to the interrupt stack.
*/
debug_stack_usage_inc();
/* It's safe to allow irq's after DR6 has been saved */
preempt_conditional_sti(regs);
if (regs->flags & X86_VM_MASK) {
handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code,
X86_TRAP_DB);
x86, vm86: Fix preemption bug for int1 debug and int3 breakpoint handlers. Impact: fix kernel bug such as: BUG: scheduling while atomic: dosemu.bin/19680/0x00000004 See also Ubuntu bug 455067 at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/455067 Commits 4915a35e35a037254550a2ba9f367a812bc37d40 ("Use preempt_conditional_sti/cli in do_int3, like on x86_64.") and 3d2a71a596bd9c761c8487a2178e95f8a61da083 ("x86, traps: converge do_debug handlers") started disabling preemption in int1 and int3 handlers on i386. The problem with vm86 is that the call to handle_vm86_trap() may jump straight to entry_32.S and never returns so preempt is never enabled again, and there is an imbalance in the preempt count. Commit be716615fe596ee117292dc615e95f707fb67fd1 ("x86, vm86: fix preemption bug"), which was later (accidentally?) reverted by commit 08d68323d1f0c34452e614263b212ca556dae47f ("hw-breakpoints: modifying generic debug exception to use thread-specific debug registers") fixed the problem for debug exceptions but not for breakpoints. There are three solutions to this problem. 1. Reenable preemption before calling handle_vm86_trap(). This was the approach that was later reverted. 2. Do not disable preemption for i386 in breakpoint and debug handlers. This was the situation before October 2008. As far as I understand preemption only needs to be disabled on x86_64 because a seperate stack is used, but it's nice to have things work the same way on i386 and x86_64. 3. Let handle_vm86_trap() return instead of jumping to assembly code. By setting a flag in _TIF_WORK_MASK, either TIF_IRET or TIF_NOTIFY_RESUME, the code in entry_32.S is instructed to return to 32 bit mode from V86 mode. The logic in entry_32.S was already present to handle signals. (I chose TIF_IRET because it's slightly more efficient in do_notify_resume() in signal.c, but in fact TIF_IRET can probably be replaced by TIF_NOTIFY_RESUME everywhere.) I'm submitting approach 3, because I believe it is the most elegant and prevents future confusion. Still, an obvious preempt_conditional_cli(regs); is necessary in traps.c to correct the bug. [ hpa: This is technically a regression, but because: 1. the regression is so old, 2. the patch seems relatively high risk, justifying more testing, and 3. we're late in the 2.6.36-rc cycle, I'm queuing it up for the 2.6.37 merge window. It might, however, justify as a -stable backport at a latter time, hence Cc: stable. ] Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net> LKML-Reference: <alpine.DEB.2.00.1009231312330.4732@localhost.localdomain> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander van Heukelum <heukelum@fastmail.fm> Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-23 17:16:58 +00:00
preempt_conditional_cli(regs);
x86: Add counter when debug stack is used with interrupts enabled Mathieu Desnoyers pointed out a case that can cause issues with NMIs running on the debug stack: int3 -> interrupt -> NMI -> int3 Because the interrupt changes the stack, the NMI will not see that it preempted the debug stack. Looking deeper at this case, interrupts only happen when the int3 is from userspace or in an a location in the exception table (fixup). userspace -> int3 -> interurpt -> NMI -> int3 All other int3s that happen in the kernel should be processed without ever enabling interrupts, as the do_trap() call will panic the kernel if it is called to process any other location within the kernel. Adding a counter around the sections that enable interrupts while using the debug stack allows the NMI to also check that case. If the NMI sees that it either interrupted a task using the debug stack or the debug counter is non-zero, then it will have to change the IDT table to make the int3 not change stacks (which will corrupt the stack if it does). Note, I had to move the debug_usage functions out of processor.h and into debugreg.h because of the static inlined functions to inc and dec the debug_usage counter. __get_cpu_var() requires smp.h which includes processor.h, and would fail to build. Link: http://lkml.kernel.org/r/1323976535.23971.112.camel@gandalf.stny.rr.com Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Turner <pjt@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-16 16:43:02 +00:00
debug_stack_usage_dec();
goto exit;
}
/*
* Single-stepping through system calls: ignore any exceptions in
* kernel space, but re-enable TF when returning to user mode.
*
* We already checked v86 mode above, so we can check for kernel mode
* by just checking the CPL of CS.
*/
if ((dr6 & DR_STEP) && !user_mode(regs)) {
tsk->thread.debugreg6 &= ~DR_STEP;
set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
regs->flags &= ~X86_EFLAGS_TF;
}
si_code = get_si_code(tsk->thread.debugreg6);
if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS) || user_icebp)
send_sigtrap(tsk, regs, error_code, si_code);
preempt_conditional_cli(regs);
x86: Add counter when debug stack is used with interrupts enabled Mathieu Desnoyers pointed out a case that can cause issues with NMIs running on the debug stack: int3 -> interrupt -> NMI -> int3 Because the interrupt changes the stack, the NMI will not see that it preempted the debug stack. Looking deeper at this case, interrupts only happen when the int3 is from userspace or in an a location in the exception table (fixup). userspace -> int3 -> interurpt -> NMI -> int3 All other int3s that happen in the kernel should be processed without ever enabling interrupts, as the do_trap() call will panic the kernel if it is called to process any other location within the kernel. Adding a counter around the sections that enable interrupts while using the debug stack allows the NMI to also check that case. If the NMI sees that it either interrupted a task using the debug stack or the debug counter is non-zero, then it will have to change the IDT table to make the int3 not change stacks (which will corrupt the stack if it does). Note, I had to move the debug_usage functions out of processor.h and into debugreg.h because of the static inlined functions to inc and dec the debug_usage counter. __get_cpu_var() requires smp.h which includes processor.h, and would fail to build. Link: http://lkml.kernel.org/r/1323976535.23971.112.camel@gandalf.stny.rr.com Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Turner <pjt@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-16 16:43:02 +00:00
debug_stack_usage_dec();
exit:
2013-02-24 00:19:14 +00:00
exception_exit(prev_state);
}
/*
* Note that we play around with the 'TS' bit in an attempt to get
* the correct behaviour even in the presence of the asynchronous
* IRQ13 behaviour
*/
void math_error(struct pt_regs *regs, int error_code, int trapnr)
{
struct task_struct *task = current;
siginfo_t info;
unsigned short err;
char *str = (trapnr == X86_TRAP_MF) ? "fpu exception" :
"simd exception";
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, SIGFPE) == NOTIFY_STOP)
return;
conditional_sti(regs);
if (!user_mode_vm(regs))
{
if (!fixup_exception(regs)) {
task->thread.error_code = error_code;
task->thread.trap_nr = trapnr;
die(str, regs, error_code);
}
return;
}
/*
* Save the info for the exception handler and clear the error.
*/
save_init_fpu(task);
task->thread.trap_nr = trapnr;
task->thread.error_code = error_code;
info.si_signo = SIGFPE;
info.si_errno = 0;
info.si_addr = (void __user *)regs->ip;
if (trapnr == X86_TRAP_MF) {
unsigned short cwd, swd;
/*
* (~cwd & swd) will mask out exceptions that are not set to unmasked
* status. 0x3f is the exception bits in these regs, 0x200 is the
* C1 reg you need in case of a stack fault, 0x040 is the stack
* fault bit. We should only be taking one exception at a time,
* so if this combination doesn't produce any single exception,
* then we have a bad program that isn't synchronizing its FPU usage
* and it will suffer the consequences since we won't be able to
* fully reproduce the context of the exception
*/
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
err = swd & ~cwd;
} else {
/*
* The SIMD FPU exceptions are handled a little differently, as there
* is only a single status/control register. Thus, to determine which
* unmasked exception was caught we must mask the exception mask bits
* at 0x1f80, and then use these to mask the exception bits at 0x3f.
*/
unsigned short mxcsr = get_fpu_mxcsr(task);
err = ~(mxcsr >> 7) & mxcsr;
}
if (err & 0x001) { /* Invalid op */
/*
* swd & 0x240 == 0x040: Stack Underflow
* swd & 0x240 == 0x240: Stack Overflow
* User must clear the SF bit (0x40) if set
*/
info.si_code = FPE_FLTINV;
} else if (err & 0x004) { /* Divide by Zero */
info.si_code = FPE_FLTDIV;
} else if (err & 0x008) { /* Overflow */
info.si_code = FPE_FLTOVF;
} else if (err & 0x012) { /* Denormal, Underflow */
info.si_code = FPE_FLTUND;
} else if (err & 0x020) { /* Precision */
info.si_code = FPE_FLTRES;
} else {
/*
* If we're using IRQ 13, or supposedly even some trap
* X86_TRAP_MF implementations, it's possible
* we get a spurious trap, which is not an error.
*/
return;
}
force_sig_info(SIGFPE, &info, task);
}
dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
{
2013-02-24 00:19:14 +00:00
enum ctx_state prev_state;
prev_state = exception_enter();
math_error(regs, error_code, X86_TRAP_MF);
2013-02-24 00:19:14 +00:00
exception_exit(prev_state);
}
dotraplinkage void
do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
{
2013-02-24 00:19:14 +00:00
enum ctx_state prev_state;
prev_state = exception_enter();
math_error(regs, error_code, X86_TRAP_XF);
2013-02-24 00:19:14 +00:00
exception_exit(prev_state);
}
dotraplinkage void
do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
{
conditional_sti(regs);
#if 0
/* No need to warn about this any longer. */
pr_info("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
#endif
}
asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
{
}
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 17:07:31 +00:00
asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
{
}
/*
* 'math_state_restore()' saves the current math information in the
* old math state array, and gets the new ones from the current task
*
* Careful.. There are problems with IBM-designed IRQ13 behaviour.
* Don't touch unless you *really* know how it works.
*
* Must be called with kernel preemption disabled (eg with local
* local interrupts as in the case of do_device_not_available).
*/
void math_state_restore(void)
{
i387: move TS_USEDFPU flag from thread_info to task_struct This moves the bit that indicates whether a thread has ownership of the FPU from the TS_USEDFPU bit in thread_info->status to a word of its own (called 'has_fpu') in task_struct->thread.has_fpu. This fixes two independent bugs at the same time: - changing 'thread_info->status' from the scheduler causes nasty problems for the other users of that variable, since it is defined to be thread-synchronous (that's what the "TS_" part of the naming was supposed to indicate). So perfectly valid code could (and did) do ti->status |= TS_RESTORE_SIGMASK; and the compiler was free to do that as separate load, or and store instructions. Which can cause problems with preemption, since a task switch could happen in between, and change the TS_USEDFPU bit. The change to TS_USEDFPU would be overwritten by the final store. In practice, this seldom happened, though, because the 'status' field was seldom used more than once, so gcc would generally tend to generate code that used a read-modify-write instruction and thus happened to avoid this problem - RMW instructions are naturally low fat and preemption-safe. - On x86-32, the current_thread_info() pointer would, during interrupts and softirqs, point to a *copy* of the real thread_info, because x86-32 uses %esp to calculate the thread_info address, and thus the separate irq (and softirq) stacks would cause these kinds of odd thread_info copy aliases. This is normally not a problem, since interrupts aren't supposed to look at thread information anyway (what thread is running at interrupt time really isn't very well-defined), but it confused the heck out of irq_fpu_usable() and the code that tried to squirrel away the FPU state. (It also caused untold confusion for us poor kernel developers). It also turns out that using 'task_struct' is actually much more natural for most of the call sites that care about the FPU state, since they tend to work with the task struct for other reasons anyway (ie scheduling). And the FPU data that we are going to save/restore is found there too. Thanks to Arjan Van De Ven <arjan@linux.intel.com> for pointing us to the %esp issue. Cc: Arjan van de Ven <arjan@linux.intel.com> Reported-and-tested-by: Raphael Prevost <raphael@buro.asia> Acked-and-tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-18 05:48:54 +00:00
struct task_struct *tsk = current;
if (!tsk_used_math(tsk)) {
local_irq_enable();
/*
* does a slab alloc which can sleep
*/
if (init_fpu(tsk)) {
/*
* ran out of memory!
*/
do_group_exit(SIGKILL);
return;
}
local_irq_disable();
}
i387: move TS_USEDFPU flag from thread_info to task_struct This moves the bit that indicates whether a thread has ownership of the FPU from the TS_USEDFPU bit in thread_info->status to a word of its own (called 'has_fpu') in task_struct->thread.has_fpu. This fixes two independent bugs at the same time: - changing 'thread_info->status' from the scheduler causes nasty problems for the other users of that variable, since it is defined to be thread-synchronous (that's what the "TS_" part of the naming was supposed to indicate). So perfectly valid code could (and did) do ti->status |= TS_RESTORE_SIGMASK; and the compiler was free to do that as separate load, or and store instructions. Which can cause problems with preemption, since a task switch could happen in between, and change the TS_USEDFPU bit. The change to TS_USEDFPU would be overwritten by the final store. In practice, this seldom happened, though, because the 'status' field was seldom used more than once, so gcc would generally tend to generate code that used a read-modify-write instruction and thus happened to avoid this problem - RMW instructions are naturally low fat and preemption-safe. - On x86-32, the current_thread_info() pointer would, during interrupts and softirqs, point to a *copy* of the real thread_info, because x86-32 uses %esp to calculate the thread_info address, and thus the separate irq (and softirq) stacks would cause these kinds of odd thread_info copy aliases. This is normally not a problem, since interrupts aren't supposed to look at thread information anyway (what thread is running at interrupt time really isn't very well-defined), but it confused the heck out of irq_fpu_usable() and the code that tried to squirrel away the FPU state. (It also caused untold confusion for us poor kernel developers). It also turns out that using 'task_struct' is actually much more natural for most of the call sites that care about the FPU state, since they tend to work with the task struct for other reasons anyway (ie scheduling). And the FPU data that we are going to save/restore is found there too. Thanks to Arjan Van De Ven <arjan@linux.intel.com> for pointing us to the %esp issue. Cc: Arjan van de Ven <arjan@linux.intel.com> Reported-and-tested-by: Raphael Prevost <raphael@buro.asia> Acked-and-tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-18 05:48:54 +00:00
__thread_fpu_begin(tsk);
x86, fpu: use non-lazy fpu restore for processors supporting xsave Fundamental model of the current Linux kernel is to lazily init and restore FPU instead of restoring the task state during context switch. This changes that fundamental lazy model to the non-lazy model for the processors supporting xsave feature. Reasons driving this model change are: i. Newer processors support optimized state save/restore using xsaveopt and xrstor by tracking the INIT state and MODIFIED state during context-switch. This is faster than modifying the cr0.TS bit which has serializing semantics. ii. Newer glibc versions use SSE for some of the optimized copy/clear routines. With certain workloads (like boot, kernel-compilation etc), application completes its work with in the first 5 task switches, thus taking upto 5 #DNA traps with the kernel not getting a chance to apply the above mentioned pre-load heuristic. iii. Some xstate features (like AMD's LWP feature) don't honor the cr0.TS bit and thus will not work correctly in the presence of lazy restore. Non-lazy state restore is needed for enabling such features. Some data on a two socket SNB system: * Saved 20K DNA exceptions during boot on a two socket SNB system. * Saved 50K DNA exceptions during kernel-compilation workload. * Improved throughput of the AVX based checksumming function inside the kernel by ~15% as xsave/xrstor is faster than the serializing clts/stts pair. Also now kernel_fpu_begin/end() relies on the patched alternative instructions. So move check_fpu() which uses the kernel_fpu_begin/end() after alternative_instructions(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1345842782-24175-7-git-send-email-suresh.b.siddha@intel.com Merge 32-bit boot fix from, Link: http://lkml.kernel.org/r/1347300665-6209-4-git-send-email-suresh.b.siddha@intel.com Cc: Jim Kukunas <james.t.kukunas@linux.intel.com> Cc: NeilBrown <neilb@suse.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-08-24 21:13:02 +00:00
/*
* Paranoid restore. send a SIGSEGV if we fail to restore the state.
*/
if (unlikely(restore_fpu_checking(tsk))) {
x86, fpu: use non-lazy fpu restore for processors supporting xsave Fundamental model of the current Linux kernel is to lazily init and restore FPU instead of restoring the task state during context switch. This changes that fundamental lazy model to the non-lazy model for the processors supporting xsave feature. Reasons driving this model change are: i. Newer processors support optimized state save/restore using xsaveopt and xrstor by tracking the INIT state and MODIFIED state during context-switch. This is faster than modifying the cr0.TS bit which has serializing semantics. ii. Newer glibc versions use SSE for some of the optimized copy/clear routines. With certain workloads (like boot, kernel-compilation etc), application completes its work with in the first 5 task switches, thus taking upto 5 #DNA traps with the kernel not getting a chance to apply the above mentioned pre-load heuristic. iii. Some xstate features (like AMD's LWP feature) don't honor the cr0.TS bit and thus will not work correctly in the presence of lazy restore. Non-lazy state restore is needed for enabling such features. Some data on a two socket SNB system: * Saved 20K DNA exceptions during boot on a two socket SNB system. * Saved 50K DNA exceptions during kernel-compilation workload. * Improved throughput of the AVX based checksumming function inside the kernel by ~15% as xsave/xrstor is faster than the serializing clts/stts pair. Also now kernel_fpu_begin/end() relies on the patched alternative instructions. So move check_fpu() which uses the kernel_fpu_begin/end() after alternative_instructions(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1345842782-24175-7-git-send-email-suresh.b.siddha@intel.com Merge 32-bit boot fix from, Link: http://lkml.kernel.org/r/1347300665-6209-4-git-send-email-suresh.b.siddha@intel.com Cc: Jim Kukunas <james.t.kukunas@linux.intel.com> Cc: NeilBrown <neilb@suse.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-08-24 21:13:02 +00:00
drop_init_fpu(tsk);
force_sig(SIGSEGV, tsk);
return;
}
tsk->fpu_counter++;
}
EXPORT_SYMBOL_GPL(math_state_restore);
dotraplinkage void __kprobes
do_device_not_available(struct pt_regs *regs, long error_code)
{
2013-02-24 00:19:14 +00:00
enum ctx_state prev_state;
prev_state = exception_enter();
BUG_ON(use_eager_fpu());
x86, fpu: use non-lazy fpu restore for processors supporting xsave Fundamental model of the current Linux kernel is to lazily init and restore FPU instead of restoring the task state during context switch. This changes that fundamental lazy model to the non-lazy model for the processors supporting xsave feature. Reasons driving this model change are: i. Newer processors support optimized state save/restore using xsaveopt and xrstor by tracking the INIT state and MODIFIED state during context-switch. This is faster than modifying the cr0.TS bit which has serializing semantics. ii. Newer glibc versions use SSE for some of the optimized copy/clear routines. With certain workloads (like boot, kernel-compilation etc), application completes its work with in the first 5 task switches, thus taking upto 5 #DNA traps with the kernel not getting a chance to apply the above mentioned pre-load heuristic. iii. Some xstate features (like AMD's LWP feature) don't honor the cr0.TS bit and thus will not work correctly in the presence of lazy restore. Non-lazy state restore is needed for enabling such features. Some data on a two socket SNB system: * Saved 20K DNA exceptions during boot on a two socket SNB system. * Saved 50K DNA exceptions during kernel-compilation workload. * Improved throughput of the AVX based checksumming function inside the kernel by ~15% as xsave/xrstor is faster than the serializing clts/stts pair. Also now kernel_fpu_begin/end() relies on the patched alternative instructions. So move check_fpu() which uses the kernel_fpu_begin/end() after alternative_instructions(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1345842782-24175-7-git-send-email-suresh.b.siddha@intel.com Merge 32-bit boot fix from, Link: http://lkml.kernel.org/r/1347300665-6209-4-git-send-email-suresh.b.siddha@intel.com Cc: Jim Kukunas <james.t.kukunas@linux.intel.com> Cc: NeilBrown <neilb@suse.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-08-24 21:13:02 +00:00
#ifdef CONFIG_MATH_EMULATION
if (read_cr0() & X86_CR0_EM) {
struct math_emu_info info = { };
conditional_sti(regs);
info.regs = regs;
math_emulate(&info);
2013-02-24 00:19:14 +00:00
exception_exit(prev_state);
return;
}
#endif
math_state_restore(); /* interrupts still off */
#ifdef CONFIG_X86_32
conditional_sti(regs);
#endif
2013-02-24 00:19:14 +00:00
exception_exit(prev_state);
}
#ifdef CONFIG_X86_32
dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
{
siginfo_t info;
2013-02-24 00:19:14 +00:00
enum ctx_state prev_state;
2013-02-24 00:19:14 +00:00
prev_state = exception_enter();
local_irq_enable();
info.si_signo = SIGILL;
info.si_errno = 0;
info.si_code = ILL_BADSTK;
info.si_addr = NULL;
if (notify_die(DIE_TRAP, "iret exception", regs, error_code,
X86_TRAP_IRET, SIGILL) != NOTIFY_STOP) {
do_trap(X86_TRAP_IRET, SIGILL, "iret exception", regs, error_code,
&info);
}
2013-02-24 00:19:14 +00:00
exception_exit(prev_state);
}
#endif
/* Set of traps needed for early debugging. */
void __init early_trap_init(void)
{
set_intr_gate_ist(X86_TRAP_DB, &debug, DEBUG_STACK);
/* int3 can be called from all */
set_system_intr_gate_ist(X86_TRAP_BP, &int3, DEBUG_STACK);
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
#ifdef CONFIG_X86_32
set_intr_gate(X86_TRAP_PF, &page_fault);
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
#endif
load_idt(&idt_descr);
}
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-24 20:19:52 +00:00
void __init early_trap_pf_init(void)
{
#ifdef CONFIG_X86_64
set_intr_gate(X86_TRAP_PF, &page_fault);
#endif
}
void __init trap_init(void)
{
int i;
#ifdef CONFIG_EISA
void __iomem *p = early_ioremap(0x0FFFD9, 4);
if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
EISA_bus = 1;
early_iounmap(p, 4);
#endif
set_intr_gate(X86_TRAP_DE, &divide_error);
set_intr_gate_ist(X86_TRAP_NMI, &nmi, NMI_STACK);
/* int4 can be called from all */
set_system_intr_gate(X86_TRAP_OF, &overflow);
set_intr_gate(X86_TRAP_BR, &bounds);
set_intr_gate(X86_TRAP_UD, &invalid_op);
set_intr_gate(X86_TRAP_NM, &device_not_available);
#ifdef CONFIG_X86_32
set_task_gate(X86_TRAP_DF, GDT_ENTRY_DOUBLEFAULT_TSS);
#else
set_intr_gate_ist(X86_TRAP_DF, &double_fault, DOUBLEFAULT_STACK);
#endif
set_intr_gate(X86_TRAP_OLD_MF, &coprocessor_segment_overrun);
set_intr_gate(X86_TRAP_TS, &invalid_TSS);
set_intr_gate(X86_TRAP_NP, &segment_not_present);
set_intr_gate_ist(X86_TRAP_SS, &stack_segment, STACKFAULT_STACK);
set_intr_gate(X86_TRAP_GP, &general_protection);
set_intr_gate(X86_TRAP_SPURIOUS, &spurious_interrupt_bug);
set_intr_gate(X86_TRAP_MF, &coprocessor_error);
set_intr_gate(X86_TRAP_AC, &alignment_check);
#ifdef CONFIG_X86_MCE
set_intr_gate_ist(X86_TRAP_MC, &machine_check, MCE_STACK);
#endif
set_intr_gate(X86_TRAP_XF, &simd_coprocessor_error);
/* Reserve all the builtin and the syscall vector: */
for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
set_bit(i, used_vectors);
#ifdef CONFIG_IA32_EMULATION
set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
set_bit(IA32_SYSCALL_VECTOR, used_vectors);
#endif
#ifdef CONFIG_X86_32
set_system_trap_gate(SYSCALL_VECTOR, &system_call);
set_bit(SYSCALL_VECTOR, used_vectors);
#endif
/*
* Set the IDT descriptor to a fixed read-only location, so that the
* "sidt" instruction will not leak the location of the kernel, and
* to defend the IDT against arbitrary memory write vulnerabilities.
* It will be reloaded in cpu_init() */
__set_fixmap(FIX_RO_IDT, __pa_symbol(idt_table), PAGE_KERNEL_RO);
idt_descr.address = fix_to_virt(FIX_RO_IDT);
/*
* Should be a barrier for any external CPU state:
*/
cpu_init();
x86_init.irqs.trap_init();
#ifdef CONFIG_X86_64
memcpy(&debug_idt_table, &idt_table, IDT_ENTRIES * 16);
set_nmi_gate(X86_TRAP_DB, &debug);
set_nmi_gate(X86_TRAP_BP, &int3);
#endif
}