Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-15 08:31:55 +00:00
Code Issues Packages Projects Releases Wiki Activity
35ee1f4990
linux/drivers/cxl/Kconfig

102 lines
3.8 KiB
Plaintext
Raw Normal View History

cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints The CXL.mem protocol allows a device to act as a provider of "System RAM" and/or "Persistent Memory" that is fully coherent as if the memory was attached to the typical CPU memory controller. With the CXL-2.0 specification a PCI endpoint can implement a "Type-3" device interface and give the operating system control over "Host Managed Device Memory". See section 2.3 Type 3 CXL Device. The memory range exported by the device may optionally be described by the platform firmware memory map, or by infrastructure like LIBNVDIMM to provision persistent memory capacity from one, or more, CXL.mem devices. A pre-requisite for Linux-managed memory-capacity provisioning is this cxl_mem driver that can speak the mailbox protocol defined in section 8.2.8.4 Mailbox Registers. For now just land the initial driver boiler-plate and Documentation/ infrastructure. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: David Rientjes <rientjes@google.com> (v1) Cc: Jonathan Corbet <corbet@lwn.net> Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 04:09:50 +00:00
# SPDX-License-Identifier: GPL-2.0-only
menuconfig CXL_BUS
tristate "CXL (Compute Express Link) Devices Support"
depends on PCI
help
CXL is a bus that is electrically compatible with PCI Express, but
layers three protocols on that signalling (CXL.io, CXL.cache, and
CXL.mem). The CXL.cache protocol allows devices to hold cachelines
locally, the CXL.mem protocol allows devices to be fully coherent
memory targets, the CXL.io protocol is equivalent to PCI Express.
Say 'y' to enable support for the configuration and management of
devices supporting these protocols.
if CXL_BUS
cxl: Rename CXL_MEM to CXL_PCI The cxl_mem module was renamed cxl_pci in commit 21e9f76733a8 ("cxl: Rename mem to pci"). In preparation for adding an ancillary driver for cxl_memdev devices (registered on the cxl bus by cxl_pci), go ahead and rename CONFIG_CXL_MEM to CONFIG_CXL_PCI. Free up the CXL_MEM name for that new driver to manage CXL.mem endpoint operations. Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Link: https://lore.kernel.org/r/164298412409.3018233.12407355692407890752.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-01-24 00:28:44 +00:00
config CXL_PCI
tristate "PCI manageability"
cxl/Kconfig: Default drivers to CONFIG_CXL_BUS CONFIG_CXL_BUS is default 'n' as expected for new functionality. When that is enabled do not make the end user hunt for all the expected sub-options to enable. For example CONFIG_CXL_BUS without CONFIG_CXL_MEM is an odd/expert configuration, so is CONFIG_CXL_MEM without CONFIG_CXL_ACPI (on ACPI capable platforms). Default CONFIG_CXL_MEM and CONFIG_CXL_ACPI to CONFIG_CXL_BUS. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325450105.2293126.17046356425194082921.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-09 16:01:41 +00:00
default CXL_BUS
cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints The CXL.mem protocol allows a device to act as a provider of "System RAM" and/or "Persistent Memory" that is fully coherent as if the memory was attached to the typical CPU memory controller. With the CXL-2.0 specification a PCI endpoint can implement a "Type-3" device interface and give the operating system control over "Host Managed Device Memory". See section 2.3 Type 3 CXL Device. The memory range exported by the device may optionally be described by the platform firmware memory map, or by infrastructure like LIBNVDIMM to provision persistent memory capacity from one, or more, CXL.mem devices. A pre-requisite for Linux-managed memory-capacity provisioning is this cxl_mem driver that can speak the mailbox protocol defined in section 8.2.8.4 Mailbox Registers. For now just land the initial driver boiler-plate and Documentation/ infrastructure. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: David Rientjes <rientjes@google.com> (v1) Cc: Jonathan Corbet <corbet@lwn.net> Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 04:09:50 +00:00
help
cxl: Rename CXL_MEM to CXL_PCI The cxl_mem module was renamed cxl_pci in commit 21e9f76733a8 ("cxl: Rename mem to pci"). In preparation for adding an ancillary driver for cxl_memdev devices (registered on the cxl bus by cxl_pci), go ahead and rename CONFIG_CXL_MEM to CONFIG_CXL_PCI. Free up the CXL_MEM name for that new driver to manage CXL.mem endpoint operations. Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Link: https://lore.kernel.org/r/164298412409.3018233.12407355692407890752.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-01-24 00:28:44 +00:00
The CXL specification defines a "CXL memory device" sub-class in the
PCI "memory controller" base class of devices. Device's identified by
this class code provide support for volatile and / or persistent
memory to be mapped into the system address map (Host-managed Device
Memory (HDM)).
cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints The CXL.mem protocol allows a device to act as a provider of "System RAM" and/or "Persistent Memory" that is fully coherent as if the memory was attached to the typical CPU memory controller. With the CXL-2.0 specification a PCI endpoint can implement a "Type-3" device interface and give the operating system control over "Host Managed Device Memory". See section 2.3 Type 3 CXL Device. The memory range exported by the device may optionally be described by the platform firmware memory map, or by infrastructure like LIBNVDIMM to provision persistent memory capacity from one, or more, CXL.mem devices. A pre-requisite for Linux-managed memory-capacity provisioning is this cxl_mem driver that can speak the mailbox protocol defined in section 8.2.8.4 Mailbox Registers. For now just land the initial driver boiler-plate and Documentation/ infrastructure. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: David Rientjes <rientjes@google.com> (v1) Cc: Jonathan Corbet <corbet@lwn.net> Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 04:09:50 +00:00
cxl: Rename CXL_MEM to CXL_PCI The cxl_mem module was renamed cxl_pci in commit 21e9f76733a8 ("cxl: Rename mem to pci"). In preparation for adding an ancillary driver for cxl_memdev devices (registered on the cxl bus by cxl_pci), go ahead and rename CONFIG_CXL_MEM to CONFIG_CXL_PCI. Free up the CXL_MEM name for that new driver to manage CXL.mem endpoint operations. Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Link: https://lore.kernel.org/r/164298412409.3018233.12407355692407890752.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-01-24 00:28:44 +00:00
Say 'y/m' to enable a driver that will attach to CXL memory expander
devices enumerated by the memory device class code for configuration
and management primarily via the mailbox interface. See Chapter 2.3
Type 3 CXL Device in the CXL 2.0 specification for more details.
cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints The CXL.mem protocol allows a device to act as a provider of "System RAM" and/or "Persistent Memory" that is fully coherent as if the memory was attached to the typical CPU memory controller. With the CXL-2.0 specification a PCI endpoint can implement a "Type-3" device interface and give the operating system control over "Host Managed Device Memory". See section 2.3 Type 3 CXL Device. The memory range exported by the device may optionally be described by the platform firmware memory map, or by infrastructure like LIBNVDIMM to provision persistent memory capacity from one, or more, CXL.mem devices. A pre-requisite for Linux-managed memory-capacity provisioning is this cxl_mem driver that can speak the mailbox protocol defined in section 8.2.8.4 Mailbox Registers. For now just land the initial driver boiler-plate and Documentation/ infrastructure. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: David Rientjes <rientjes@google.com> (v1) Cc: Jonathan Corbet <corbet@lwn.net> Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 04:09:50 +00:00
If unsure say 'm'.
cxl/mem: Add a "RAW" send command The CXL memory device send interface will have a number of supported commands. The raw command is not such a command. Raw commands allow userspace to send a specified opcode to the underlying hardware and bypass all driver checks on the command. The primary use for this command is to [begrudgingly] allow undocumented vendor specific hardware commands. While not the main motivation, it also allows prototyping new hardware commands without a driver patch and rebuild. While this all sounds very powerful it comes with a couple of caveats: 1. Bug reports using raw commands will not get the same level of attention as bug reports using supported commands (via taint). 2. Supported commands will be rejected by the RAW command. With this comes new debugfs knob to allow full access to your toes with your weapon of choice. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2) Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Ariel Sibley <Ariel.Sibley@microchip.com> Link: https://lore.kernel.org/r/20210217040958.1354670-6-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 04:09:54 +00:00
config CXL_MEM_RAW_COMMANDS
bool "RAW Command Interface for Memory Devices"
cxl: Rename CXL_MEM to CXL_PCI The cxl_mem module was renamed cxl_pci in commit 21e9f76733a8 ("cxl: Rename mem to pci"). In preparation for adding an ancillary driver for cxl_memdev devices (registered on the cxl bus by cxl_pci), go ahead and rename CONFIG_CXL_MEM to CONFIG_CXL_PCI. Free up the CXL_MEM name for that new driver to manage CXL.mem endpoint operations. Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Link: https://lore.kernel.org/r/164298412409.3018233.12407355692407890752.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-01-24 00:28:44 +00:00
depends on CXL_PCI
cxl/mem: Add a "RAW" send command The CXL memory device send interface will have a number of supported commands. The raw command is not such a command. Raw commands allow userspace to send a specified opcode to the underlying hardware and bypass all driver checks on the command. The primary use for this command is to [begrudgingly] allow undocumented vendor specific hardware commands. While not the main motivation, it also allows prototyping new hardware commands without a driver patch and rebuild. While this all sounds very powerful it comes with a couple of caveats: 1. Bug reports using raw commands will not get the same level of attention as bug reports using supported commands (via taint). 2. Supported commands will be rejected by the RAW command. With this comes new debugfs knob to allow full access to your toes with your weapon of choice. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2) Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Ariel Sibley <Ariel.Sibley@microchip.com> Link: https://lore.kernel.org/r/20210217040958.1354670-6-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 04:09:54 +00:00
help
Enable CXL RAW command interface.
The CXL driver ioctl interface may assign a kernel ioctl command
number for each specification defined opcode. At any given point in
time the number of opcodes that the specification defines and a device
may implement may exceed the kernel's set of associated ioctl function
numbers. The mismatch is either by omission, specification is too new,
or by design. When prototyping new hardware, or developing / debugging
the driver it is useful to be able to submit any possible command to
the hardware, even commands that may crash the kernel due to their
potential impact to memory currently in use by the kernel.
If developing CXL hardware or the driver say Y, otherwise say N.
cxl/acpi: Introduce the root of a cxl_port topology While CXL builds upon the PCI software model for enumeration and endpoint control, a static platform component is required to bootstrap the CXL memory layout. Similar to how ACPI identifies root-level PCI memory resources, ACPI data enumerates the address space and interleave configuration for CXL Memory. In addition to identifying host bridges, ACPI is responsible for enumerating the CXL memory space that can be addressed by downstream decoders. This is similar to the requirement for ACPI to publish resources via the _CRS method for PCI host bridges. Specifically, ACPI publishes a table, CXL Early Discovery Table (CEDT), which includes a list of CXL Memory resources, CXL Fixed Memory Window Structures (CFMWS). For now, introduce the core infrastructure for a cxl_port hierarchy starting with a root level anchor represented by the ACPI0017 device. Follow on changes model support for the configurable decode capabilities of cxl_port instances, i.e. CXL switch support. Co-developed-by: Alison Schofield <alison.schofield@intel.com> Signed-off-by: Alison Schofield <alison.schofield@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325449515.2293126.15303270193010154608.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-09 16:01:35 +00:00
config CXL_ACPI
tristate "CXL ACPI: Platform Support"
depends on ACPI
cxl/Kconfig: Default drivers to CONFIG_CXL_BUS CONFIG_CXL_BUS is default 'n' as expected for new functionality. When that is enabled do not make the end user hunt for all the expected sub-options to enable. For example CONFIG_CXL_BUS without CONFIG_CXL_MEM is an odd/expert configuration, so is CONFIG_CXL_MEM without CONFIG_CXL_ACPI (on ACPI capable platforms). Default CONFIG_CXL_MEM and CONFIG_CXL_ACPI to CONFIG_CXL_BUS. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325450105.2293126.17046356425194082921.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-09 16:01:41 +00:00
default CXL_BUS
cxl/acpi: Convert CFMWS parsing to ACPI sub-table helpers The cxl_acpi driver originally open-coded its table parsing since the ACPI subtable helpers were marked __init and only used in early NUMA initialization. Now that those helpers have been exported for driver usage replace the open-coded solution with the common one. Cc: Alison Schofield <alison.schofield@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/163553710810.2509508.14686373989517930921.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-10-29 19:51:48 +00:00
select ACPI_TABLE_LIB
cxl/acpi: Introduce the root of a cxl_port topology While CXL builds upon the PCI software model for enumeration and endpoint control, a static platform component is required to bootstrap the CXL memory layout. Similar to how ACPI identifies root-level PCI memory resources, ACPI data enumerates the address space and interleave configuration for CXL Memory. In addition to identifying host bridges, ACPI is responsible for enumerating the CXL memory space that can be addressed by downstream decoders. This is similar to the requirement for ACPI to publish resources via the _CRS method for PCI host bridges. Specifically, ACPI publishes a table, CXL Early Discovery Table (CEDT), which includes a list of CXL Memory resources, CXL Fixed Memory Window Structures (CFMWS). For now, introduce the core infrastructure for a cxl_port hierarchy starting with a root level anchor represented by the ACPI0017 device. Follow on changes model support for the configurable decode capabilities of cxl_port instances, i.e. CXL switch support. Co-developed-by: Alison Schofield <alison.schofield@intel.com> Signed-off-by: Alison Schofield <alison.schofield@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325449515.2293126.15303270193010154608.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-09 16:01:35 +00:00
help
Enable support for host managed device memory (HDM) resources
published by a platform's ACPI CXL memory layout description. See
Chapter 9.14.1 CXL Early Discovery Table (CEDT) in the CXL 2.0
specification, and CXL Fixed Memory Window Structures (CEDT.CFMWS)
(https://www.computeexpresslink.org/spec-landing). The CXL core
consumes these resource to publish the root of a cxl_port decode
hierarchy to map regions that represent System RAM, or Persistent
Memory regions to be managed by LIBNVDIMM.
cxl/pmem: Add initial infrastructure for pmem support Register an 'nvdimm-bridge' device to act as an anchor for a libnvdimm bus hierarchy. Also, flesh out the cxl_bus definition to allow a cxl_nvdimm_bridge_driver to attach to the bridge and trigger the nvdimm-bus registration. The creation of the bridge is gated on the detection of a PMEM capable address space registered to the root. The bridge indirection allows the libnvdimm module to remain unloaded on platforms without PMEM support. Given that the probing of ACPI0017 is asynchronous to CXL endpoint devices, and the expectation that CXL endpoint devices register other PMEM resources on the 'CXL' nvdimm bus, a workqueue is added. The workqueue is needed to run bus_rescan_devices() outside of the device_lock() of the nvdimm-bridge device to rendezvous nvdimm resources as they arrive. For now only the bus is taken online/offline in the workqueue. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162379909706.2993820.14051258608641140169.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-15 23:18:17 +00:00
If unsure say 'm'.
config CXL_PMEM
tristate "CXL PMEM: Persistent Memory Support"
depends on LIBNVDIMM
default CXL_BUS
help
In addition to typical memory resources a platform may also advertise
support for persistent memory attached via CXL. This support is
managed via a bridge driver from CXL to the LIBNVDIMM system
subsystem. Say 'y/m' to enable support for enumerating and
provisioning the persistent memory capacity of CXL memory expanders.
cxl/acpi: Introduce the root of a cxl_port topology While CXL builds upon the PCI software model for enumeration and endpoint control, a static platform component is required to bootstrap the CXL memory layout. Similar to how ACPI identifies root-level PCI memory resources, ACPI data enumerates the address space and interleave configuration for CXL Memory. In addition to identifying host bridges, ACPI is responsible for enumerating the CXL memory space that can be addressed by downstream decoders. This is similar to the requirement for ACPI to publish resources via the _CRS method for PCI host bridges. Specifically, ACPI publishes a table, CXL Early Discovery Table (CEDT), which includes a list of CXL Memory resources, CXL Fixed Memory Window Structures (CFMWS). For now, introduce the core infrastructure for a cxl_port hierarchy starting with a root level anchor represented by the ACPI0017 device. Follow on changes model support for the configurable decode capabilities of cxl_port instances, i.e. CXL switch support. Co-developed-by: Alison Schofield <alison.schofield@intel.com> Signed-off-by: Alison Schofield <alison.schofield@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325449515.2293126.15303270193010154608.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-09 16:01:35 +00:00
If unsure say 'm'.
cxl/port: Add a driver for 'struct cxl_port' objects The need for a CXL port driver and a dedicated cxl_bus_type is driven by a need to simultaneously support 2 independent physical memory decode domains (cache coherent CXL.mem and uncached PCI.mmio) that also intersect at a single PCIe device node. A CXL Port is a device that advertises a CXL Component Register block with an "HDM Decoder Capability Structure". >From Documentation/driver-api/cxl/memory-devices.rst: Similar to how a RAID driver takes disk objects and assembles them into a new logical device, the CXL subsystem is tasked to take PCIe and ACPI objects and assemble them into a CXL.mem decode topology. The need for runtime configuration of the CXL.mem topology is also similar to RAID in that different environments with the same hardware configuration may decide to assemble the topology in contrasting ways. One may choose performance (RAID0) striping memory across multiple Host Bridges and endpoints while another may opt for fault tolerance and disable any striping in the CXL.mem topology. The port driver identifies whether an endpoint Memory Expander is connected to a CXL topology. If an active (bound to the 'cxl_port' driver) CXL Port is not found at every PCIe Switch Upstream port and an active "root" CXL Port then the device is just a plain PCIe endpoint only capable of participating in PCI.mmio and DMA cycles, not CXL.mem coherent interleave sets. The 'cxl_port' driver lets the CXL subsystem leverage driver-core infrastructure for setup and teardown of register resources and communicating device activation status to userspace. The cxl_bus_type can rendezvous the async arrival of platform level CXL resources (via the 'cxl_acpi' driver) with the asynchronous enumeration of Memory Expander endpoints, while also implementing a hierarchical locking model independent of the associated 'struct pci_dev' locking model. The locking for dport and decoder enumeration is now handled in the core rather than callers. For now the port driver only enumerates and registers CXL resources (downstream port metadata and decoder resources) later it will be used to take action on its decoders in response to CXL.mem region provisioning requests. Note1: cxlpci.h has long depended on pci.h, but port.c was the first to not include pci.h. Carry that dependency in cxlpci.h. Note2: cxl port enumeration and probing complicates CXL subsystem init to the point that it helps to have centralized debug logging of probe events in cxl_bus_probe(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Co-developed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/164374948116.464348.1772618057599155408.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-02-01 21:07:51 +00:00
cxl/mem: Add the cxl_mem driver At this point the subsystem can enumerate all CXL ports (CXL.mem decode resources in upstream switch ports and host bridges) in a system. The last mile is connecting those ports to endpoints. The cxl_mem driver connects an endpoint device to the platform CXL.mem protoctol decode-topology. At ->probe() time it walks its device-topology-ancestry and adds a CXL Port object at every Upstream Port hop until it gets to CXL root. The CXL root object is only present after a platform firmware driver registers platform CXL resources. For ACPI based platform this is managed by the ACPI0017 device and the cxl_acpi driver. The ports are registered such that disabling a given port automatically unregisters all descendant ports, and the chain can only be registered after the root is established. Given ACPI device scanning may run asynchronously compared to PCI device scanning the root driver is tasked with rescanning the bus after the root successfully probes. Conversely if any ports in a chain between the root and an endpoint becomes disconnected it subsequently triggers the endpoint to unregister. Given lock depenedencies the endpoint unregistration happens in a workqueue asynchronously. If userspace cares about synchronizing delayed work after port events the /sys/bus/cxl/flush attribute is available for that purpose. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [djbw: clarify changelog, rework hotplug support] Link: https://lore.kernel.org/r/164398782997.903003.9725273241627693186.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-02-04 15:18:31 +00:00
config CXL_MEM
tristate "CXL: Memory Expansion"
depends on CXL_PCI
default CXL_BUS
help
The CXL.mem protocol allows a device to act as a provider of "System
RAM" and/or "Persistent Memory" that is fully coherent as if the
memory were attached to the typical CPU memory controller. This is
known as HDM "Host-managed Device Memory".
Say 'y/m' to enable a driver that will attach to CXL.mem devices for
memory expansion and control of HDM. See Chapter 9.13 in the CXL 2.0
specification for a detailed description of HDM.
If unsure say 'm'.
cxl/port: Add a driver for 'struct cxl_port' objects The need for a CXL port driver and a dedicated cxl_bus_type is driven by a need to simultaneously support 2 independent physical memory decode domains (cache coherent CXL.mem and uncached PCI.mmio) that also intersect at a single PCIe device node. A CXL Port is a device that advertises a CXL Component Register block with an "HDM Decoder Capability Structure". >From Documentation/driver-api/cxl/memory-devices.rst: Similar to how a RAID driver takes disk objects and assembles them into a new logical device, the CXL subsystem is tasked to take PCIe and ACPI objects and assemble them into a CXL.mem decode topology. The need for runtime configuration of the CXL.mem topology is also similar to RAID in that different environments with the same hardware configuration may decide to assemble the topology in contrasting ways. One may choose performance (RAID0) striping memory across multiple Host Bridges and endpoints while another may opt for fault tolerance and disable any striping in the CXL.mem topology. The port driver identifies whether an endpoint Memory Expander is connected to a CXL topology. If an active (bound to the 'cxl_port' driver) CXL Port is not found at every PCIe Switch Upstream port and an active "root" CXL Port then the device is just a plain PCIe endpoint only capable of participating in PCI.mmio and DMA cycles, not CXL.mem coherent interleave sets. The 'cxl_port' driver lets the CXL subsystem leverage driver-core infrastructure for setup and teardown of register resources and communicating device activation status to userspace. The cxl_bus_type can rendezvous the async arrival of platform level CXL resources (via the 'cxl_acpi' driver) with the asynchronous enumeration of Memory Expander endpoints, while also implementing a hierarchical locking model independent of the associated 'struct pci_dev' locking model. The locking for dport and decoder enumeration is now handled in the core rather than callers. For now the port driver only enumerates and registers CXL resources (downstream port metadata and decoder resources) later it will be used to take action on its decoders in response to CXL.mem region provisioning requests. Note1: cxlpci.h has long depended on pci.h, but port.c was the first to not include pci.h. Carry that dependency in cxlpci.h. Note2: cxl port enumeration and probing complicates CXL subsystem init to the point that it helps to have centralized debug logging of probe events in cxl_bus_probe(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Co-developed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/164374948116.464348.1772618057599155408.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-02-01 21:07:51 +00:00
config CXL_PORT
default CXL_BUS
tristate
cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints The CXL.mem protocol allows a device to act as a provider of "System RAM" and/or "Persistent Memory" that is fully coherent as if the memory was attached to the typical CPU memory controller. With the CXL-2.0 specification a PCI endpoint can implement a "Type-3" device interface and give the operating system control over "Host Managed Device Memory". See section 2.3 Type 3 CXL Device. The memory range exported by the device may optionally be described by the platform firmware memory map, or by infrastructure like LIBNVDIMM to provision persistent memory capacity from one, or more, CXL.mem devices. A pre-requisite for Linux-managed memory-capacity provisioning is this cxl_mem driver that can speak the mailbox protocol defined in section 8.2.8.4 Mailbox Registers. For now just land the initial driver boiler-plate and Documentation/ infrastructure. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: David Rientjes <rientjes@google.com> (v1) Cc: Jonathan Corbet <corbet@lwn.net> Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 04:09:50 +00:00
endif
Reference in New Issue Copy Permalink