linux/arch/x86/kernel/quirks.c

570 lines
15 KiB
C
Raw Normal View History

/*
* This file contains work-arounds for x86 and x86_64 platform bugs.
*/
#include <linux/pci.h>
#include <linux/irq.h>
#include <asm/hpet.h>
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
{
u8 config;
u16 word;
/* BIOS may enable hardware IRQ balancing for
* E7520/E7320/E7525(revision ID 0x9 and below)
* based platforms.
* Disable SW irqbalance/affinity on those platforms.
*/
if (dev->revision > 0x9)
return;
/* enable access to config space*/
pci_read_config_byte(dev, 0xf4, &config);
pci_write_config_byte(dev, 0xf4, config|0x2);
/*
* read xTPR register. We may not have a pci_dev for device 8
* because it might be hidden until the above write.
*/
pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word);
if (!(word & (1 << 13))) {
dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
"disabling irq balancing and affinity\n");
noirqdebug_setup("");
#ifdef CONFIG_PROC_FS
no_irq_affinity = 1;
#endif
}
/* put back the original value for config space*/
if (!(config & 0x2))
pci_write_config_byte(dev, 0xf4, config);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH,
quirk_intel_irqbalance);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH,
quirk_intel_irqbalance);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH,
quirk_intel_irqbalance);
#endif
#if defined(CONFIG_HPET_TIMER)
unsigned long force_hpet_address;
static enum {
NONE_FORCE_HPET_RESUME,
OLD_ICH_FORCE_HPET_RESUME,
ICH_FORCE_HPET_RESUME,
VT8237_FORCE_HPET_RESUME,
NVIDIA_FORCE_HPET_RESUME,
ATI_FORCE_HPET_RESUME,
} force_hpet_resume_type;
static void __iomem *rcba_base;
static void ich_force_hpet_resume(void)
{
u32 val;
if (!force_hpet_address)
return;
BUG_ON(rcba_base == NULL);
/* read the Function Disable register, dword mode only */
val = readl(rcba_base + 0x3404);
if (!(val & 0x80)) {
/* HPET disabled in HPTC. Trying to enable */
writel(val | 0x80, rcba_base + 0x3404);
}
val = readl(rcba_base + 0x3404);
if (!(val & 0x80))
BUG();
else
printk(KERN_DEBUG "Force enabled HPET at resume\n");
return;
}
static void ich_force_enable_hpet(struct pci_dev *dev)
{
u32 val;
u32 uninitialized_var(rcba);
int err = 0;
if (hpet_address || force_hpet_address)
return;
pci_read_config_dword(dev, 0xF0, &rcba);
rcba &= 0xFFFFC000;
if (rcba == 0) {
dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
"cannot force enable HPET\n");
return;
}
/* use bits 31:14, 16 kB aligned */
rcba_base = ioremap_nocache(rcba, 0x4000);
if (rcba_base == NULL) {
dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
"cannot force enable HPET\n");
return;
}
/* read the Function Disable register, dword mode only */
val = readl(rcba_base + 0x3404);
if (val & 0x80) {
/* HPET is enabled in HPTC. Just not reported by BIOS */
val = val & 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
"0x%lx\n", force_hpet_address);
iounmap(rcba_base);
return;
}
/* HPET disabled in HPTC. Trying to enable */
writel(val | 0x80, rcba_base + 0x3404);
val = readl(rcba_base + 0x3404);
if (!(val & 0x80)) {
err = 1;
} else {
val = val & 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
}
if (err) {
force_hpet_address = 0;
iounmap(rcba_base);
dev_printk(KERN_DEBUG, &dev->dev,
"Failed to force enable HPET\n");
} else {
force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
"0x%lx\n", force_hpet_address);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16, /* ICH10 */
ich_force_enable_hpet);
static struct pci_dev *cached_dev;
static void hpet_print_force_info(void)
{
printk(KERN_INFO "HPET not enabled in BIOS. "
"You might try hpet=force boot option\n");
}
static void old_ich_force_hpet_resume(void)
{
u32 val;
u32 uninitialized_var(gen_cntl);
if (!force_hpet_address || !cached_dev)
return;
pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
gen_cntl &= (~(0x7 << 15));
gen_cntl |= (0x4 << 15);
pci_write_config_dword(cached_dev, 0xD0, gen_cntl);
pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
val = gen_cntl >> 15;
val &= 0x7;
if (val == 0x4)
printk(KERN_DEBUG "Force enabled HPET at resume\n");
else
BUG();
}
static void old_ich_force_enable_hpet(struct pci_dev *dev)
{
u32 val;
u32 uninitialized_var(gen_cntl);
if (hpet_address || force_hpet_address)
return;
pci_read_config_dword(dev, 0xD0, &gen_cntl);
/*
* Bit 17 is HPET enable bit.
* Bit 16:15 control the HPET base address.
*/
val = gen_cntl >> 15;
val &= 0x7;
if (val & 0x4) {
val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
force_hpet_address);
return;
}
/*
* HPET is disabled. Trying enabling at FED00000 and check
* whether it sticks
*/
gen_cntl &= (~(0x7 << 15));
gen_cntl |= (0x4 << 15);
pci_write_config_dword(dev, 0xD0, gen_cntl);
pci_read_config_dword(dev, 0xD0, &gen_cntl);
val = gen_cntl >> 15;
val &= 0x7;
if (val & 0x4) {
/* HPET is enabled in HPTC. Just not reported by BIOS */
val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
"0x%lx\n", force_hpet_address);
cached_dev = dev;
force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
return;
}
dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
}
/*
* Undocumented chipset features. Make sure that the user enforced
* this.
*/
static void old_ich_force_enable_hpet_user(struct pci_dev *dev)
{
if (hpet_force_user)
old_ich_force_enable_hpet(dev);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
old_ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12,
old_ich_force_enable_hpet);
static void vt8237_force_hpet_resume(void)
{
u32 val;
if (!force_hpet_address || !cached_dev)
return;
val = 0xfed00000 | 0x80;
pci_write_config_dword(cached_dev, 0x68, val);
pci_read_config_dword(cached_dev, 0x68, &val);
if (val & 0x80)
printk(KERN_DEBUG "Force enabled HPET at resume\n");
else
BUG();
}
static void vt8237_force_enable_hpet(struct pci_dev *dev)
{
u32 uninitialized_var(val);
if (hpet_address || force_hpet_address)
return;
if (!hpet_force_user) {
hpet_print_force_info();
return;
}
pci_read_config_dword(dev, 0x68, &val);
/*
* Bit 7 is HPET enable bit.
* Bit 31:10 is HPET base address (contrary to what datasheet claims)
*/
if (val & 0x80) {
force_hpet_address = (val & ~0x3ff);
dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
force_hpet_address);
return;
}
/*
* HPET is disabled. Trying enabling at FED00000 and check
* whether it sticks
*/
val = 0xfed00000 | 0x80;
pci_write_config_dword(dev, 0x68, val);
pci_read_config_dword(dev, 0x68, &val);
if (val & 0x80) {
force_hpet_address = (val & ~0x3ff);
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
"0x%lx\n", force_hpet_address);
cached_dev = dev;
force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
return;
}
dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
vt8237_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
vt8237_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700,
vt8237_force_enable_hpet);
static void ati_force_hpet_resume(void)
{
pci_write_config_dword(cached_dev, 0x14, 0xfed00000);
printk(KERN_DEBUG "Force enabled HPET at resume\n");
}
static u32 ati_ixp4x0_rev(struct pci_dev *dev)
{
u32 d;
u8 b;
pci_read_config_byte(dev, 0xac, &b);
b &= ~(1<<5);
pci_write_config_byte(dev, 0xac, b);
pci_read_config_dword(dev, 0x70, &d);
d |= 1<<8;
pci_write_config_dword(dev, 0x70, d);
pci_read_config_dword(dev, 0x8, &d);
d &= 0xff;
dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d);
return d;
}
static void ati_force_enable_hpet(struct pci_dev *dev)
{
u32 d, val;
u8 b;
if (hpet_address || force_hpet_address)
return;
if (!hpet_force_user) {
hpet_print_force_info();
return;
}
d = ati_ixp4x0_rev(dev);
if (d < 0x82)
return;
/* base address */
pci_write_config_dword(dev, 0x14, 0xfed00000);
pci_read_config_dword(dev, 0x14, &val);
/* enable interrupt */
outb(0x72, 0xcd6); b = inb(0xcd7);
b |= 0x1;
outb(0x72, 0xcd6); outb(b, 0xcd7);
outb(0x72, 0xcd6); b = inb(0xcd7);
if (!(b & 0x1))
return;
pci_read_config_dword(dev, 0x64, &d);
d |= (1<<10);
pci_write_config_dword(dev, 0x64, d);
pci_read_config_dword(dev, 0x64, &d);
if (!(d & (1<<10)))
return;
force_hpet_address = val;
force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
force_hpet_address);
cached_dev = dev;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
ati_force_enable_hpet);
/*
* Undocumented chipset feature taken from LinuxBIOS.
*/
static void nvidia_force_hpet_resume(void)
{
pci_write_config_dword(cached_dev, 0x44, 0xfed00001);
printk(KERN_DEBUG "Force enabled HPET at resume\n");
}
static void nvidia_force_enable_hpet(struct pci_dev *dev)
{
u32 uninitialized_var(val);
if (hpet_address || force_hpet_address)
return;
if (!hpet_force_user) {
hpet_print_force_info();
return;
}
pci_write_config_dword(dev, 0x44, 0xfed00001);
pci_read_config_dword(dev, 0x44, &val);
force_hpet_address = val & 0xfffffffe;
force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
force_hpet_address);
cached_dev = dev;
return;
}
/* ISA Bridges */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0050,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051,
nvidia_force_enable_hpet);
/* LPC bridges */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0362,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0363,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0364,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0365,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0366,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0367,
nvidia_force_enable_hpet);
void force_hpet_resume(void)
{
switch (force_hpet_resume_type) {
case ICH_FORCE_HPET_RESUME:
ich_force_hpet_resume();
return;
case OLD_ICH_FORCE_HPET_RESUME:
old_ich_force_hpet_resume();
return;
case VT8237_FORCE_HPET_RESUME:
vt8237_force_hpet_resume();
return;
case NVIDIA_FORCE_HPET_RESUME:
nvidia_force_hpet_resume();
return;
case ATI_FORCE_HPET_RESUME:
ati_force_hpet_resume();
return;
default:
break;
}
}
/*
* HPET MSI on some boards (ATI SB700/SB800) has side effect on
* floppy DMA. Disable HPET MSI on such platforms.
* See erratum #27 (Misinterpreted MSI Requests May Result in
* Corrupted LPC DMA Data) in AMD Publication #46837,
* "SB700 Family Product Errata", Rev. 1.0, March 2010.
*/
static void force_disable_hpet_msi(struct pci_dev *unused)
{
hpet_msi_disable = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
force_disable_hpet_msi);
#endif
#if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
/* Set correct numa_node information for AMD NB functions */
static void __devinit quirk_amd_nb_node(struct pci_dev *dev)
{
struct pci_dev *nb_ht;
unsigned int devfn;
x86: AMD Northbridge: Verify NB's node is online Fix panic seen on some IBM and HP systems on 2.6.32-rc6: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8120bf3f>] find_next_bit+0x77/0x9c [...] [<ffffffff8120bbde>] cpumask_next_and+0x2e/0x3b [<ffffffff81225c62>] pci_device_probe+0x8e/0xf5 [<ffffffff812b9be6>] ? driver_sysfs_add+0x47/0x6c [<ffffffff812b9da5>] driver_probe_device+0xd9/0x1f9 [<ffffffff812b9f1d>] __driver_attach+0x58/0x7c [<ffffffff812b9ec5>] ? __driver_attach+0x0/0x7c [<ffffffff812b9298>] bus_for_each_dev+0x54/0x89 [<ffffffff812b9b4f>] driver_attach+0x19/0x1b [<ffffffff812b97ae>] bus_add_driver+0xd3/0x23d [<ffffffff812ba1e7>] driver_register+0x98/0x109 [<ffffffff81225ed0>] __pci_register_driver+0x63/0xd3 [<ffffffff81072776>] ? up_read+0x26/0x2a [<ffffffffa0081000>] ? k8temp_init+0x0/0x20 [k8temp] [<ffffffffa008101e>] k8temp_init+0x1e/0x20 [k8temp] [<ffffffff8100a073>] do_one_initcall+0x6d/0x185 [<ffffffff8108d765>] sys_init_module+0xd3/0x236 [<ffffffff81011ac2>] system_call_fastpath+0x16/0x1b I put in a printk and commented out the set_dev_node() call when and got this output: quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x0 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x1 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x2 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x3 I.e. the issue appears to be that the HW has set val to a valid value, however, the system is only configured for a single node -- 0, the others are offline. Check to see if the node is actually online before setting the numa node for an AMD northbridge in quirk_amd_nb_node(). Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: bhavna.sarathy@amd.com Cc: jbarnes@virtuousgeek.org Cc: andreas.herrmann3@amd.com LKML-Reference: <20091112180933.12532.98685.sendpatchset@prarit.bos.redhat.com> [ v2: clean up the code and add comments ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-12 18:09:31 +00:00
u32 node;
u32 val;
devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
nb_ht = pci_get_slot(dev->bus, devfn);
if (!nb_ht)
return;
pci_read_config_dword(nb_ht, 0x60, &val);
x86: AMD Northbridge: Verify NB's node is online Fix panic seen on some IBM and HP systems on 2.6.32-rc6: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8120bf3f>] find_next_bit+0x77/0x9c [...] [<ffffffff8120bbde>] cpumask_next_and+0x2e/0x3b [<ffffffff81225c62>] pci_device_probe+0x8e/0xf5 [<ffffffff812b9be6>] ? driver_sysfs_add+0x47/0x6c [<ffffffff812b9da5>] driver_probe_device+0xd9/0x1f9 [<ffffffff812b9f1d>] __driver_attach+0x58/0x7c [<ffffffff812b9ec5>] ? __driver_attach+0x0/0x7c [<ffffffff812b9298>] bus_for_each_dev+0x54/0x89 [<ffffffff812b9b4f>] driver_attach+0x19/0x1b [<ffffffff812b97ae>] bus_add_driver+0xd3/0x23d [<ffffffff812ba1e7>] driver_register+0x98/0x109 [<ffffffff81225ed0>] __pci_register_driver+0x63/0xd3 [<ffffffff81072776>] ? up_read+0x26/0x2a [<ffffffffa0081000>] ? k8temp_init+0x0/0x20 [k8temp] [<ffffffffa008101e>] k8temp_init+0x1e/0x20 [k8temp] [<ffffffff8100a073>] do_one_initcall+0x6d/0x185 [<ffffffff8108d765>] sys_init_module+0xd3/0x236 [<ffffffff81011ac2>] system_call_fastpath+0x16/0x1b I put in a printk and commented out the set_dev_node() call when and got this output: quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x0 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x1 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x2 quirk_amd_nb_node: current numa_node = 0x0, would set to val & 7 = 0x3 I.e. the issue appears to be that the HW has set val to a valid value, however, the system is only configured for a single node -- 0, the others are offline. Check to see if the node is actually online before setting the numa node for an AMD northbridge in quirk_amd_nb_node(). Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: bhavna.sarathy@amd.com Cc: jbarnes@virtuousgeek.org Cc: andreas.herrmann3@amd.com LKML-Reference: <20091112180933.12532.98685.sendpatchset@prarit.bos.redhat.com> [ v2: clean up the code and add comments ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-12 18:09:31 +00:00
node = val & 7;
/*
* Some hardware may return an invalid node ID,
* so check it first:
*/
if (node_online(node))
set_dev_node(&dev->dev, node);
pci_dev_put(nb_ht);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_HT,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MAP,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5,
quirk_amd_nb_node);
#endif