Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-16 00:52:01 +00:00
Code Issues Packages Projects Releases Wiki Activity
3401d54696
linux/arch/arm/kvm/arm.c

1037 lines
24 KiB
C
Raw Normal View History

KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
/*
* Copyright (C) 2012 - Virtual Open Systems and Columbia University
* Author: Christoffer Dall <c.dall@virtualopensystems.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/kvm_host.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/mman.h>
#include <linux/sched.h>
KVM: ARM: Inject IRQs and FIQs from userspace All interrupt injection is now based on the VM ioctl KVM_IRQ_LINE. This works semantically well for the GIC as we in fact raise/lower a line on a machine component (the gic). The IOCTL uses the follwing struct. struct kvm_irq_level { union { __u32 irq; /* GSI */ __s32 status; /* not used for KVM_IRQ_LEVEL */ }; __u32 level; /* 0 or 1 */ }; ARM can signal an interrupt either at the CPU level, or at the in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to use PPIs designated for specific cpus. The irq field is interpreted like this:  bits: | 31 ... 24 | 23 ... 16 | 15 ... 0 | field: | irq_type | vcpu_index | irq_number | The irq_type field has the following values: - irq_type[0]: out-of-kernel GIC: irq_number 0 is IRQ, irq_number 1 is FIQ - irq_type[1]: in-kernel GIC: SPI, irq_number between 32 and 1019 (incl.) (the vcpu_index field is ignored) - irq_type[2]: in-kernel GIC: PPI, irq_number between 16 and 31 (incl.) The irq_number thus corresponds to the irq ID in as in the GICv2 specs. This is documented in Documentation/kvm/api.txt. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:08 +00:00
#include <linux/kvm.h>
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
#include <trace/events/kvm.h>
#define CREATE_TRACE_POINTS
#include "trace.h"
#include <asm/unified.h>
#include <asm/uaccess.h>
#include <asm/ptrace.h>
#include <asm/mman.h>
#include <asm/cputype.h>
KVM: ARM: Hypervisor initialization Sets up KVM code to handle all exceptions taken to Hyp mode. When the kernel is booted in Hyp mode, calling an hvc instruction with r0 pointing to the new vectors, the HVBAR is changed to the the vector pointers. This allows subsystems (like KVM here) to execute code in Hyp-mode with the MMU disabled. We initialize other Hyp-mode registers and enables the MMU for Hyp-mode from the id-mapped hyp initialization code. Afterwards, the HVBAR is changed to point to KVM Hyp vectors used to catch guest faults and to switch to Hyp mode to perform a world-switch into a KVM guest. Also provides memory mapping code to map required code pages, data structures, and I/O regions accessed in Hyp mode at the same virtual address as the host kernel virtual addresses, but which conforms to the architectural requirements for translations in Hyp mode. This interface is added in arch/arm/kvm/arm_mmu.c and comprises: - create_hyp_mappings(from, to); - create_hyp_io_mappings(from, to, phys_addr); - free_hyp_pmds(); Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
#include <asm/tlbflush.h>
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
#include <asm/cacheflush.h>
KVM: ARM: Hypervisor initialization Sets up KVM code to handle all exceptions taken to Hyp mode. When the kernel is booted in Hyp mode, calling an hvc instruction with r0 pointing to the new vectors, the HVBAR is changed to the the vector pointers. This allows subsystems (like KVM here) to execute code in Hyp-mode with the MMU disabled. We initialize other Hyp-mode registers and enables the MMU for Hyp-mode from the id-mapped hyp initialization code. Afterwards, the HVBAR is changed to point to KVM Hyp vectors used to catch guest faults and to switch to Hyp mode to perform a world-switch into a KVM guest. Also provides memory mapping code to map required code pages, data structures, and I/O regions accessed in Hyp mode at the same virtual address as the host kernel virtual addresses, but which conforms to the architectural requirements for translations in Hyp mode. This interface is added in arch/arm/kvm/arm_mmu.c and comprises: - create_hyp_mappings(from, to); - create_hyp_io_mappings(from, to, phys_addr); - free_hyp_pmds(); Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
#include <asm/virt.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmu.h>
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
#include <asm/kvm_emulate.h>
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
#include <asm/kvm_coproc.h>
KVM: ARM: Power State Coordination Interface implementation Implement the PSCI specification (ARM DEN 0022A) to control virtual CPUs being "powered" on or off. PSCI/KVM is detected using the KVM_CAP_ARM_PSCI capability. A virtual CPU can now be initialized in a "powered off" state, using the KVM_ARM_VCPU_POWER_OFF feature flag. The guest can use either SMC or HVC to execute a PSCI function. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:13 +00:00
#include <asm/kvm_psci.h>
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
#include <asm/opcodes.h>
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
#ifdef REQUIRES_VIRT
__asm__(".arch_extension virt");
#endif
KVM: ARM: Hypervisor initialization Sets up KVM code to handle all exceptions taken to Hyp mode. When the kernel is booted in Hyp mode, calling an hvc instruction with r0 pointing to the new vectors, the HVBAR is changed to the the vector pointers. This allows subsystems (like KVM here) to execute code in Hyp-mode with the MMU disabled. We initialize other Hyp-mode registers and enables the MMU for Hyp-mode from the id-mapped hyp initialization code. Afterwards, the HVBAR is changed to point to KVM Hyp vectors used to catch guest faults and to switch to Hyp mode to perform a world-switch into a KVM guest. Also provides memory mapping code to map required code pages, data structures, and I/O regions accessed in Hyp mode at the same virtual address as the host kernel virtual addresses, but which conforms to the architectural requirements for translations in Hyp mode. This interface is added in arch/arm/kvm/arm_mmu.c and comprises: - create_hyp_mappings(from, to); - create_hyp_io_mappings(from, to, phys_addr); - free_hyp_pmds(); Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
static struct vfp_hard_struct __percpu *kvm_host_vfp_state;
static unsigned long hyp_default_vectors;
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
/* The VMID used in the VTTBR */
static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1);
static u8 kvm_next_vmid;
static DEFINE_SPINLOCK(kvm_vmid_lock);
KVM: ARM: Hypervisor initialization Sets up KVM code to handle all exceptions taken to Hyp mode. When the kernel is booted in Hyp mode, calling an hvc instruction with r0 pointing to the new vectors, the HVBAR is changed to the the vector pointers. This allows subsystems (like KVM here) to execute code in Hyp-mode with the MMU disabled. We initialize other Hyp-mode registers and enables the MMU for Hyp-mode from the id-mapped hyp initialization code. Afterwards, the HVBAR is changed to point to KVM Hyp vectors used to catch guest faults and to switch to Hyp mode to perform a world-switch into a KVM guest. Also provides memory mapping code to map required code pages, data structures, and I/O regions accessed in Hyp mode at the same virtual address as the host kernel virtual addresses, but which conforms to the architectural requirements for translations in Hyp mode. This interface is added in arch/arm/kvm/arm_mmu.c and comprises: - create_hyp_mappings(from, to); - create_hyp_io_mappings(from, to, phys_addr); - free_hyp_pmds(); Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
int kvm_arch_hardware_enable(void *garbage)
{
return 0;
}
int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
{
return kvm_vcpu_exiting_guest_mode(vcpu) == IN_GUEST_MODE;
}
void kvm_arch_hardware_disable(void *garbage)
{
}
int kvm_arch_hardware_setup(void)
{
return 0;
}
void kvm_arch_hardware_unsetup(void)
{
}
void kvm_arch_check_processor_compat(void *rtn)
{
*(int *)rtn = 0;
}
void kvm_arch_sync_events(struct kvm *kvm)
{
}
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:07 +00:00
/**
* kvm_arch_init_vm - initializes a VM data structure
* @kvm: pointer to the KVM struct
*/
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
{
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:07 +00:00
int ret = 0;
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
if (type)
return -EINVAL;
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:07 +00:00
ret = kvm_alloc_stage2_pgd(kvm);
if (ret)
goto out_fail_alloc;
ret = create_hyp_mappings(kvm, kvm + 1);
if (ret)
goto out_free_stage2_pgd;
/* Mark the initial VMID generation invalid */
kvm->arch.vmid_gen = 0;
return ret;
out_free_stage2_pgd:
kvm_free_stage2_pgd(kvm);
out_fail_alloc:
return ret;
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
}
int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf)
{
return VM_FAULT_SIGBUS;
}
void kvm_arch_free_memslot(struct kvm_memory_slot *free,
struct kvm_memory_slot *dont)
{
}
int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
{
return 0;
}
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:07 +00:00
/**
* kvm_arch_destroy_vm - destroy the VM data structure
* @kvm: pointer to the KVM struct
*/
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
void kvm_arch_destroy_vm(struct kvm *kvm)
{
int i;
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:07 +00:00
kvm_free_stage2_pgd(kvm);
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
for (i = 0; i < KVM_MAX_VCPUS; ++i) {
if (kvm->vcpus[i]) {
kvm_arch_vcpu_free(kvm->vcpus[i]);
kvm->vcpus[i] = NULL;
}
}
}
int kvm_dev_ioctl_check_extension(long ext)
{
int r;
switch (ext) {
case KVM_CAP_USER_MEMORY:
case KVM_CAP_SYNC_MMU:
case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
case KVM_CAP_ONE_REG:
KVM: ARM: Power State Coordination Interface implementation Implement the PSCI specification (ARM DEN 0022A) to control virtual CPUs being "powered" on or off. PSCI/KVM is detected using the KVM_CAP_ARM_PSCI capability. A virtual CPU can now be initialized in a "powered off" state, using the KVM_ARM_VCPU_POWER_OFF feature flag. The guest can use either SMC or HVC to execute a PSCI function. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:13 +00:00
case KVM_CAP_ARM_PSCI:
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
r = 1;
break;
case KVM_CAP_COALESCED_MMIO:
r = KVM_COALESCED_MMIO_PAGE_OFFSET;
break;
KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctl On ARM some bits are specific to the model being emulated for the guest and user space needs a way to tell the kernel about those bits. An example is mmio device base addresses, where KVM must know the base address for a given device to properly emulate mmio accesses within a certain address range or directly map a device with virtualiation extensions into the guest address space. We make this API ARM-specific as we haven't yet reached a consensus for a generic API for all KVM architectures that will allow us to do something like this. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-01-23 18:18:04 +00:00
case KVM_CAP_ARM_SET_DEVICE_ADDR:
r = 1;
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
case KVM_CAP_NR_VCPUS:
r = num_online_cpus();
break;
case KVM_CAP_MAX_VCPUS:
r = KVM_MAX_VCPUS;
break;
default:
r = 0;
break;
}
return r;
}
long kvm_arch_dev_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
return -EINVAL;
}
int kvm_arch_set_memory_region(struct kvm *kvm,
struct kvm_userspace_memory_region *mem,
struct kvm_memory_slot old,
int user_alloc)
{
return 0;
}
int kvm_arch_prepare_memory_region(struct kvm *kvm,
struct kvm_memory_slot *memslot,
struct kvm_memory_slot old,
struct kvm_userspace_memory_region *mem,
int user_alloc)
{
return 0;
}
void kvm_arch_commit_memory_region(struct kvm *kvm,
struct kvm_userspace_memory_region *mem,
struct kvm_memory_slot old,
int user_alloc)
{
}
void kvm_arch_flush_shadow_all(struct kvm *kvm)
{
}
void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
struct kvm_memory_slot *slot)
{
}
struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
{
int err;
struct kvm_vcpu *vcpu;
vcpu = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
if (!vcpu) {
err = -ENOMEM;
goto out;
}
err = kvm_vcpu_init(vcpu, kvm, id);
if (err)
goto free_vcpu;
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:07 +00:00
err = create_hyp_mappings(vcpu, vcpu + 1);
if (err)
goto vcpu_uninit;
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
return vcpu;
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:07 +00:00
vcpu_uninit:
kvm_vcpu_uninit(vcpu);
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
free_vcpu:
kmem_cache_free(kvm_vcpu_cache, vcpu);
out:
return ERR_PTR(err);
}
int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
{
return 0;
}
void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
{
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:07 +00:00
kvm_mmu_free_memory_caches(vcpu);
kmem_cache_free(kvm_vcpu_cache, vcpu);
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
}
void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
{
kvm_arch_vcpu_free(vcpu);
}
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
{
return 0;
}
int __attribute_const__ kvm_target_cpu(void)
{
unsigned long implementor = read_cpuid_implementor();
unsigned long part_number = read_cpuid_part_number();
if (implementor != ARM_CPU_IMP_ARM)
return -EINVAL;
switch (part_number) {
case ARM_CPU_PART_CORTEX_A15:
return KVM_ARM_TARGET_CORTEX_A15;
default:
return -EINVAL;
}
}
int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
{
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
/* Force users to call KVM_ARM_VCPU_INIT */
vcpu->arch.target = -1;
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
return 0;
}
void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
{
}
void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
KVM: ARM: Inject IRQs and FIQs from userspace All interrupt injection is now based on the VM ioctl KVM_IRQ_LINE. This works semantically well for the GIC as we in fact raise/lower a line on a machine component (the gic). The IOCTL uses the follwing struct. struct kvm_irq_level { union { __u32 irq; /* GSI */ __s32 status; /* not used for KVM_IRQ_LEVEL */ }; __u32 level; /* 0 or 1 */ }; ARM can signal an interrupt either at the CPU level, or at the in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to use PPIs designated for specific cpus. The irq field is interpreted like this:  bits: | 31 ... 24 | 23 ... 16 | 15 ... 0 | field: | irq_type | vcpu_index | irq_number | The irq_type field has the following values: - irq_type[0]: out-of-kernel GIC: irq_number 0 is IRQ, irq_number 1 is FIQ - irq_type[1]: in-kernel GIC: SPI, irq_number between 32 and 1019 (incl.) (the vcpu_index field is ignored) - irq_type[2]: in-kernel GIC: PPI, irq_number between 16 and 31 (incl.) The irq_number thus corresponds to the irq ID in as in the GICv2 specs. This is documented in Documentation/kvm/api.txt. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:08 +00:00
vcpu->cpu = cpu;
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
vcpu->arch.vfp_host = this_cpu_ptr(kvm_host_vfp_state);
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
/*
* Check whether this vcpu requires the cache to be flushed on
* this physical CPU. This is a consequence of doing dcache
* operations by set/way on this vcpu. We do it here to be in
* a non-preemptible section.
*/
if (cpumask_test_and_clear_cpu(cpu, &vcpu->arch.require_dcache_flush))
flush_cache_all(); /* We'd really want v7_flush_dcache_all() */
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
}
int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
struct kvm_guest_debug *dbg)
{
return -EINVAL;
}
int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
struct kvm_mp_state *mp_state)
{
return -EINVAL;
}
int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
struct kvm_mp_state *mp_state)
{
return -EINVAL;
}
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
/**
* kvm_arch_vcpu_runnable - determine if the vcpu can be scheduled
* @v: The VCPU pointer
*
* If the guest CPU is not waiting for interrupts or an interrupt line is
* asserted, the CPU is by definition runnable.
*/
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
{
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
return !!v->arch.irq_lines;
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
}
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
/* Just ensure a guest exit from a particular CPU */
static void exit_vm_noop(void *info)
{
}
void force_vm_exit(const cpumask_t *mask)
{
smp_call_function_many(mask, exit_vm_noop, NULL, true);
}
/**
* need_new_vmid_gen - check that the VMID is still valid
* @kvm: The VM's VMID to checkt
*
* return true if there is a new generation of VMIDs being used
*
* The hardware supports only 256 values with the value zero reserved for the
* host, so we check if an assigned value belongs to a previous generation,
* which which requires us to assign a new value. If we're the first to use a
* VMID for the new generation, we must flush necessary caches and TLBs on all
* CPUs.
*/
static bool need_new_vmid_gen(struct kvm *kvm)
{
return unlikely(kvm->arch.vmid_gen != atomic64_read(&kvm_vmid_gen));
}
/**
* update_vttbr - Update the VTTBR with a valid VMID before the guest runs
* @kvm The guest that we are about to run
*
* Called from kvm_arch_vcpu_ioctl_run before entering the guest to ensure the
* VM has a valid VMID, otherwise assigns a new one and flushes corresponding
* caches and TLBs.
*/
static void update_vttbr(struct kvm *kvm)
{
phys_addr_t pgd_phys;
u64 vmid;
if (!need_new_vmid_gen(kvm))
return;
spin_lock(&kvm_vmid_lock);
/*
* We need to re-check the vmid_gen here to ensure that if another vcpu
* already allocated a valid vmid for this vm, then this vcpu should
* use the same vmid.
*/
if (!need_new_vmid_gen(kvm)) {
spin_unlock(&kvm_vmid_lock);
return;
}
/* First user of a new VMID generation? */
if (unlikely(kvm_next_vmid == 0)) {
atomic64_inc(&kvm_vmid_gen);
kvm_next_vmid = 1;
/*
* On SMP we know no other CPUs can use this CPU's or each
* other's VMID after force_vm_exit returns since the
* kvm_vmid_lock blocks them from reentry to the guest.
*/
force_vm_exit(cpu_all_mask);
/*
* Now broadcast TLB + ICACHE invalidation over the inner
* shareable domain to make sure all data structures are
* clean.
*/
kvm_call_hyp(__kvm_flush_vm_context);
}
kvm->arch.vmid_gen = atomic64_read(&kvm_vmid_gen);
kvm->arch.vmid = kvm_next_vmid;
kvm_next_vmid++;
/* update vttbr to be used with the new vmid */
pgd_phys = virt_to_phys(kvm->arch.pgd);
vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK;
kvm->arch.vttbr = pgd_phys & VTTBR_BADDR_MASK;
kvm->arch.vttbr |= vmid;
spin_unlock(&kvm_vmid_lock);
}
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
/* SVC called from Hyp mode should never get here */
kvm_debug("SVC called from Hyp mode shouldn't go here\n");
BUG();
return -EINVAL; /* Squash warning */
}
static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0),
vcpu->arch.hsr & HSR_HVC_IMM_MASK);
KVM: ARM: Power State Coordination Interface implementation Implement the PSCI specification (ARM DEN 0022A) to control virtual CPUs being "powered" on or off. PSCI/KVM is detected using the KVM_CAP_ARM_PSCI capability. A virtual CPU can now be initialized in a "powered off" state, using the KVM_ARM_VCPU_POWER_OFF feature flag. The guest can use either SMC or HVC to execute a PSCI function. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:13 +00:00
if (kvm_psci_call(vcpu))
return 1;
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
kvm_inject_undefined(vcpu);
return 1;
}
static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
KVM: ARM: Power State Coordination Interface implementation Implement the PSCI specification (ARM DEN 0022A) to control virtual CPUs being "powered" on or off. PSCI/KVM is detected using the KVM_CAP_ARM_PSCI capability. A virtual CPU can now be initialized in a "powered off" state, using the KVM_ARM_VCPU_POWER_OFF feature flag. The guest can use either SMC or HVC to execute a PSCI function. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:13 +00:00
if (kvm_psci_call(vcpu))
return 1;
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
kvm_inject_undefined(vcpu);
return 1;
}
static int handle_pabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
/* The hypervisor should never cause aborts */
kvm_err("Prefetch Abort taken from Hyp mode at %#08x (HSR: %#08x)\n",
vcpu->arch.hxfar, vcpu->arch.hsr);
return -EFAULT;
}
static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
/* This is either an error in the ws. code or an external abort */
kvm_err("Data Abort taken from Hyp mode at %#08x (HSR: %#08x)\n",
vcpu->arch.hxfar, vcpu->arch.hsr);
return -EFAULT;
}
typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *);
static exit_handle_fn arm_exit_handlers[] = {
[HSR_EC_WFI] = kvm_handle_wfi,
[HSR_EC_CP15_32] = kvm_handle_cp15_32,
[HSR_EC_CP15_64] = kvm_handle_cp15_64,
[HSR_EC_CP14_MR] = kvm_handle_cp14_access,
[HSR_EC_CP14_LS] = kvm_handle_cp14_load_store,
[HSR_EC_CP14_64] = kvm_handle_cp14_access,
[HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access,
[HSR_EC_CP10_ID] = kvm_handle_cp10_id,
[HSR_EC_SVC_HYP] = handle_svc_hyp,
[HSR_EC_HVC] = handle_hvc,
[HSR_EC_SMC] = handle_smc,
[HSR_EC_IABT] = kvm_handle_guest_abort,
[HSR_EC_IABT_HYP] = handle_pabt_hyp,
[HSR_EC_DABT] = kvm_handle_guest_abort,
[HSR_EC_DABT_HYP] = handle_dabt_hyp,
};
/*
* A conditional instruction is allowed to trap, even though it
* wouldn't be executed. So let's re-implement the hardware, in
* software!
*/
static bool kvm_condition_valid(struct kvm_vcpu *vcpu)
{
unsigned long cpsr, cond, insn;
/*
* Exception Code 0 can only happen if we set HCR.TGE to 1, to
* catch undefined instructions, and then we won't get past
* the arm_exit_handlers test anyway.
*/
BUG_ON(((vcpu->arch.hsr & HSR_EC) >> HSR_EC_SHIFT) == 0);
/* Top two bits non-zero? Unconditional. */
if (vcpu->arch.hsr >> 30)
return true;
cpsr = *vcpu_cpsr(vcpu);
/* Is condition field valid? */
if ((vcpu->arch.hsr & HSR_CV) >> HSR_CV_SHIFT)
cond = (vcpu->arch.hsr & HSR_COND) >> HSR_COND_SHIFT;
else {
/* This can happen in Thumb mode: examine IT state. */
unsigned long it;
it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3);
/* it == 0 => unconditional. */
if (it == 0)
return true;
/* The cond for this insn works out as the top 4 bits. */
cond = (it >> 4);
}
/* Shift makes it look like an ARM-mode instruction */
insn = cond << 28;
return arm_check_condition(insn, cpsr) != ARM_OPCODE_CONDTEST_FAIL;
}
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
/*
* Return > 0 to return to guest, < 0 on error, 0 (and set exit_reason) on
* proper exit to QEMU.
*/
static int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
int exception_index)
{
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
unsigned long hsr_ec;
switch (exception_index) {
case ARM_EXCEPTION_IRQ:
return 1;
case ARM_EXCEPTION_UNDEFINED:
kvm_err("Undefined exception in Hyp mode at: %#08x\n",
vcpu->arch.hyp_pc);
BUG();
panic("KVM: Hypervisor undefined exception!\n");
case ARM_EXCEPTION_DATA_ABORT:
case ARM_EXCEPTION_PREF_ABORT:
case ARM_EXCEPTION_HVC:
hsr_ec = (vcpu->arch.hsr & HSR_EC) >> HSR_EC_SHIFT;
if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers)
|| !arm_exit_handlers[hsr_ec]) {
kvm_err("Unkown exception class: %#08lx, "
"hsr: %#08x\n", hsr_ec,
(unsigned int)vcpu->arch.hsr);
BUG();
}
/*
* See ARM ARM B1.14.1: "Hyp traps on instructions
* that fail their condition code check"
*/
if (!kvm_condition_valid(vcpu)) {
bool is_wide = vcpu->arch.hsr & HSR_IL;
kvm_skip_instr(vcpu, is_wide);
return 1;
}
return arm_exit_handlers[hsr_ec](vcpu, run);
default:
kvm_pr_unimpl("Unsupported exception type: %d",
exception_index);
run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
return 0;
}
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
}
static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu)
{
if (likely(vcpu->arch.has_run_once))
return 0;
vcpu->arch.has_run_once = true;
KVM: ARM: Power State Coordination Interface implementation Implement the PSCI specification (ARM DEN 0022A) to control virtual CPUs being "powered" on or off. PSCI/KVM is detected using the KVM_CAP_ARM_PSCI capability. A virtual CPU can now be initialized in a "powered off" state, using the KVM_ARM_VCPU_POWER_OFF feature flag. The guest can use either SMC or HVC to execute a PSCI function. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:13 +00:00
/*
* Handle the "start in power-off" case by calling into the
* PSCI code.
*/
if (test_and_clear_bit(KVM_ARM_VCPU_POWER_OFF, vcpu->arch.features)) {
*vcpu_reg(vcpu, 0) = KVM_PSCI_FN_CPU_OFF;
kvm_psci_call(vcpu);
}
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
return 0;
}
KVM: ARM: Power State Coordination Interface implementation Implement the PSCI specification (ARM DEN 0022A) to control virtual CPUs being "powered" on or off. PSCI/KVM is detected using the KVM_CAP_ARM_PSCI capability. A virtual CPU can now be initialized in a "powered off" state, using the KVM_ARM_VCPU_POWER_OFF feature flag. The guest can use either SMC or HVC to execute a PSCI function. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:13 +00:00
static void vcpu_pause(struct kvm_vcpu *vcpu)
{
wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
wait_event_interruptible(*wq, !vcpu->arch.pause);
}
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
/**
* kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
* @vcpu: The VCPU pointer
* @run: The kvm_run structure pointer used for userspace state exchange
*
* This function is called through the VCPU_RUN ioctl called from user space. It
* will execute VM code in a loop until the time slice for the process is used
* or some emulation is needed from user space in which case the function will
* return with return value 0 and with the kvm_run structure filled in with the
* required data for the requested emulation.
*/
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
int ret;
sigset_t sigsaved;
/* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */
if (unlikely(vcpu->arch.target < 0))
return -ENOEXEC;
ret = kvm_vcpu_first_run_init(vcpu);
if (ret)
return ret;
KVM: ARM: Handle I/O aborts When the guest accesses I/O memory this will create data abort exceptions and they are handled by decoding the HSR information (physical address, read/write, length, register) and forwarding reads and writes to QEMU which performs the device emulation. Certain classes of load/store operations do not support the syndrome information provided in the HSR. We don't support decoding these (patches are available elsewhere), so we report an error to user space in this case. This requires changing the general flow somewhat since new calls to run the VCPU must check if there's a pending MMIO load and perform the write after userspace has made the data available. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:43:58 +00:00
if (run->exit_reason == KVM_EXIT_MMIO) {
ret = kvm_handle_mmio_return(vcpu, vcpu->run);
if (ret)
return ret;
}
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
ret = 1;
run->exit_reason = KVM_EXIT_UNKNOWN;
while (ret > 0) {
/*
* Check conditions before entering the guest
*/
cond_resched();
update_vttbr(vcpu->kvm);
KVM: ARM: Power State Coordination Interface implementation Implement the PSCI specification (ARM DEN 0022A) to control virtual CPUs being "powered" on or off. PSCI/KVM is detected using the KVM_CAP_ARM_PSCI capability. A virtual CPU can now be initialized in a "powered off" state, using the KVM_ARM_VCPU_POWER_OFF feature flag. The guest can use either SMC or HVC to execute a PSCI function. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:13 +00:00
if (vcpu->arch.pause)
vcpu_pause(vcpu);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
local_irq_disable();
/*
* Re-check atomic conditions
*/
if (signal_pending(current)) {
ret = -EINTR;
run->exit_reason = KVM_EXIT_INTR;
}
if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) {
local_irq_enable();
continue;
}
/**************************************************************
* Enter the guest
*/
trace_kvm_entry(*vcpu_pc(vcpu));
kvm_guest_enter();
vcpu->mode = IN_GUEST_MODE;
ret = kvm_call_hyp(__kvm_vcpu_run, vcpu);
vcpu->mode = OUTSIDE_GUEST_MODE;
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
vcpu->arch.last_pcpu = smp_processor_id();
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:47:42 +00:00
kvm_guest_exit();
trace_kvm_exit(*vcpu_pc(vcpu));
/*
* We may have taken a host interrupt in HYP mode (ie
* while executing the guest). This interrupt is still
* pending, as we haven't serviced it yet!
*
* We're now back in SVC mode, with interrupts
* disabled. Enabling the interrupts now will have
* the effect of taking the interrupt again, in SVC
* mode this time.
*/
local_irq_enable();
/*
* Back from guest
*************************************************************/
ret = handle_exit(vcpu, run, ret);
}
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
return ret;
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
}
KVM: ARM: Inject IRQs and FIQs from userspace All interrupt injection is now based on the VM ioctl KVM_IRQ_LINE. This works semantically well for the GIC as we in fact raise/lower a line on a machine component (the gic). The IOCTL uses the follwing struct. struct kvm_irq_level { union { __u32 irq; /* GSI */ __s32 status; /* not used for KVM_IRQ_LEVEL */ }; __u32 level; /* 0 or 1 */ }; ARM can signal an interrupt either at the CPU level, or at the in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to use PPIs designated for specific cpus. The irq field is interpreted like this:  bits: | 31 ... 24 | 23 ... 16 | 15 ... 0 | field: | irq_type | vcpu_index | irq_number | The irq_type field has the following values: - irq_type[0]: out-of-kernel GIC: irq_number 0 is IRQ, irq_number 1 is FIQ - irq_type[1]: in-kernel GIC: SPI, irq_number between 32 and 1019 (incl.) (the vcpu_index field is ignored) - irq_type[2]: in-kernel GIC: PPI, irq_number between 16 and 31 (incl.) The irq_number thus corresponds to the irq ID in as in the GICv2 specs. This is documented in Documentation/kvm/api.txt. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:08 +00:00
static int vcpu_interrupt_line(struct kvm_vcpu *vcpu, int number, bool level)
{
int bit_index;
bool set;
unsigned long *ptr;
if (number == KVM_ARM_IRQ_CPU_IRQ)
bit_index = __ffs(HCR_VI);
else /* KVM_ARM_IRQ_CPU_FIQ */
bit_index = __ffs(HCR_VF);
ptr = (unsigned long *)&vcpu->arch.irq_lines;
if (level)
set = test_and_set_bit(bit_index, ptr);
else
set = test_and_clear_bit(bit_index, ptr);
/*
* If we didn't change anything, no need to wake up or kick other CPUs
*/
if (set == level)
return 0;
/*
* The vcpu irq_lines field was updated, wake up sleeping VCPUs and
* trigger a world-switch round on the running physical CPU to set the
* virtual IRQ/FIQ fields in the HCR appropriately.
*/
kvm_vcpu_kick(vcpu);
return 0;
}
int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level)
{
u32 irq = irq_level->irq;
unsigned int irq_type, vcpu_idx, irq_num;
int nrcpus = atomic_read(&kvm->online_vcpus);
struct kvm_vcpu *vcpu = NULL;
bool level = irq_level->level;
irq_type = (irq >> KVM_ARM_IRQ_TYPE_SHIFT) & KVM_ARM_IRQ_TYPE_MASK;
vcpu_idx = (irq >> KVM_ARM_IRQ_VCPU_SHIFT) & KVM_ARM_IRQ_VCPU_MASK;
irq_num = (irq >> KVM_ARM_IRQ_NUM_SHIFT) & KVM_ARM_IRQ_NUM_MASK;
trace_kvm_irq_line(irq_type, vcpu_idx, irq_num, irq_level->level);
if (irq_type != KVM_ARM_IRQ_TYPE_CPU)
return -EINVAL;
if (vcpu_idx >= nrcpus)
return -EINVAL;
vcpu = kvm_get_vcpu(kvm, vcpu_idx);
if (!vcpu)
return -EINVAL;
if (irq_num > KVM_ARM_IRQ_CPU_FIQ)
return -EINVAL;
return vcpu_interrupt_line(vcpu, irq_num, level);
}
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
long kvm_arch_vcpu_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
struct kvm_vcpu *vcpu = filp->private_data;
void __user *argp = (void __user *)arg;
switch (ioctl) {
case KVM_ARM_VCPU_INIT: {
struct kvm_vcpu_init init;
if (copy_from_user(&init, argp, sizeof(init)))
return -EFAULT;
return kvm_vcpu_set_target(vcpu, &init);
}
case KVM_SET_ONE_REG:
case KVM_GET_ONE_REG: {
struct kvm_one_reg reg;
if (copy_from_user(&reg, argp, sizeof(reg)))
return -EFAULT;
if (ioctl == KVM_SET_ONE_REG)
return kvm_arm_set_reg(vcpu, &reg);
else
return kvm_arm_get_reg(vcpu, &reg);
}
case KVM_GET_REG_LIST: {
struct kvm_reg_list __user *user_list = argp;
struct kvm_reg_list reg_list;
unsigned n;
if (copy_from_user(&reg_list, user_list, sizeof(reg_list)))
return -EFAULT;
n = reg_list.n;
reg_list.n = kvm_arm_num_regs(vcpu);
if (copy_to_user(user_list, &reg_list, sizeof(reg_list)))
return -EFAULT;
if (n < reg_list.n)
return -E2BIG;
return kvm_arm_copy_reg_indices(vcpu, user_list->reg);
}
default:
return -EINVAL;
}
}
int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
{
return -EINVAL;
}
KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctl On ARM some bits are specific to the model being emulated for the guest and user space needs a way to tell the kernel about those bits. An example is mmio device base addresses, where KVM must know the base address for a given device to properly emulate mmio accesses within a certain address range or directly map a device with virtualiation extensions into the guest address space. We make this API ARM-specific as we haven't yet reached a consensus for a generic API for all KVM architectures that will allow us to do something like this. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-01-23 18:18:04 +00:00
static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm,
struct kvm_arm_device_addr *dev_addr)
{
return -ENODEV;
}
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
long kvm_arch_vm_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctl On ARM some bits are specific to the model being emulated for the guest and user space needs a way to tell the kernel about those bits. An example is mmio device base addresses, where KVM must know the base address for a given device to properly emulate mmio accesses within a certain address range or directly map a device with virtualiation extensions into the guest address space. We make this API ARM-specific as we haven't yet reached a consensus for a generic API for all KVM architectures that will allow us to do something like this. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-01-23 18:18:04 +00:00
struct kvm *kvm = filp->private_data;
void __user *argp = (void __user *)arg;
switch (ioctl) {
case KVM_ARM_SET_DEVICE_ADDR: {
struct kvm_arm_device_addr dev_addr;
if (copy_from_user(&dev_addr, argp, sizeof(dev_addr)))
return -EFAULT;
return kvm_vm_ioctl_set_device_addr(kvm, &dev_addr);
}
default:
return -EINVAL;
}
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
}
KVM: ARM: Hypervisor initialization Sets up KVM code to handle all exceptions taken to Hyp mode. When the kernel is booted in Hyp mode, calling an hvc instruction with r0 pointing to the new vectors, the HVBAR is changed to the the vector pointers. This allows subsystems (like KVM here) to execute code in Hyp-mode with the MMU disabled. We initialize other Hyp-mode registers and enables the MMU for Hyp-mode from the id-mapped hyp initialization code. Afterwards, the HVBAR is changed to point to KVM Hyp vectors used to catch guest faults and to switch to Hyp mode to perform a world-switch into a KVM guest. Also provides memory mapping code to map required code pages, data structures, and I/O regions accessed in Hyp mode at the same virtual address as the host kernel virtual addresses, but which conforms to the architectural requirements for translations in Hyp mode. This interface is added in arch/arm/kvm/arm_mmu.c and comprises: - create_hyp_mappings(from, to); - create_hyp_io_mappings(from, to, phys_addr); - free_hyp_pmds(); Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
static void cpu_init_hyp_mode(void *vector)
{
unsigned long long pgd_ptr;
unsigned long pgd_low, pgd_high;
unsigned long hyp_stack_ptr;
unsigned long stack_page;
unsigned long vector_ptr;
/* Switch from the HYP stub to our own HYP init vector */
__hyp_set_vectors((unsigned long)vector);
pgd_ptr = (unsigned long long)kvm_mmu_get_httbr();
pgd_low = (pgd_ptr & ((1ULL << 32) - 1));
pgd_high = (pgd_ptr >> 32ULL);
stack_page = __get_cpu_var(kvm_arm_hyp_stack_page);
hyp_stack_ptr = stack_page + PAGE_SIZE;
vector_ptr = (unsigned long)__kvm_hyp_vector;
/*
* Call initialization code, and switch to the full blown
* HYP code. The init code doesn't need to preserve these registers as
* r1-r3 and r12 are already callee save according to the AAPCS.
* Note that we slightly misuse the prototype by casing the pgd_low to
* a void *.
*/
kvm_call_hyp((void *)pgd_low, pgd_high, hyp_stack_ptr, vector_ptr);
}
/**
* Inits Hyp-mode on all online CPUs
*/
static int init_hyp_mode(void)
{
phys_addr_t init_phys_addr;
int cpu;
int err = 0;
/*
* Allocate Hyp PGD and setup Hyp identity mapping
*/
err = kvm_mmu_init();
if (err)
goto out_err;
/*
* It is probably enough to obtain the default on one
* CPU. It's unlikely to be different on the others.
*/
hyp_default_vectors = __hyp_get_vectors();
/*
* Allocate stack pages for Hypervisor-mode
*/
for_each_possible_cpu(cpu) {
unsigned long stack_page;
stack_page = __get_free_page(GFP_KERNEL);
if (!stack_page) {
err = -ENOMEM;
goto out_free_stack_pages;
}
per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page;
}
/*
* Execute the init code on each CPU.
*
* Note: The stack is not mapped yet, so don't do anything else than
* initializing the hypervisor mode on each CPU using a local stack
* space for temporary storage.
*/
init_phys_addr = virt_to_phys(__kvm_hyp_init);
for_each_online_cpu(cpu) {
smp_call_function_single(cpu, cpu_init_hyp_mode,
(void *)(long)init_phys_addr, 1);
}
/*
* Unmap the identity mapping
*/
kvm_clear_hyp_idmap();
/*
* Map the Hyp-code called directly from the host
*/
err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end);
if (err) {
kvm_err("Cannot map world-switch code\n");
goto out_free_mappings;
}
/*
* Map the Hyp stack pages
*/
for_each_possible_cpu(cpu) {
char *stack_page = (char *)per_cpu(kvm_arm_hyp_stack_page, cpu);
err = create_hyp_mappings(stack_page, stack_page + PAGE_SIZE);
if (err) {
kvm_err("Cannot map hyp stack\n");
goto out_free_mappings;
}
}
/*
* Map the host VFP structures
*/
kvm_host_vfp_state = alloc_percpu(struct vfp_hard_struct);
if (!kvm_host_vfp_state) {
err = -ENOMEM;
kvm_err("Cannot allocate host VFP state\n");
goto out_free_mappings;
}
for_each_possible_cpu(cpu) {
struct vfp_hard_struct *vfp;
vfp = per_cpu_ptr(kvm_host_vfp_state, cpu);
err = create_hyp_mappings(vfp, vfp + 1);
if (err) {
kvm_err("Cannot map host VFP state: %d\n", err);
goto out_free_vfp;
}
}
kvm_info("Hyp mode initialized successfully\n");
return 0;
out_free_vfp:
free_percpu(kvm_host_vfp_state);
out_free_mappings:
free_hyp_pmds();
out_free_stack_pages:
for_each_possible_cpu(cpu)
free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
out_err:
kvm_err("error initializing Hyp mode: %d\n", err);
return err;
}
/**
* Initialize Hyp-mode and memory mappings on all CPUs.
*/
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
int kvm_arch_init(void *opaque)
{
KVM: ARM: Hypervisor initialization Sets up KVM code to handle all exceptions taken to Hyp mode. When the kernel is booted in Hyp mode, calling an hvc instruction with r0 pointing to the new vectors, the HVBAR is changed to the the vector pointers. This allows subsystems (like KVM here) to execute code in Hyp-mode with the MMU disabled. We initialize other Hyp-mode registers and enables the MMU for Hyp-mode from the id-mapped hyp initialization code. Afterwards, the HVBAR is changed to point to KVM Hyp vectors used to catch guest faults and to switch to Hyp mode to perform a world-switch into a KVM guest. Also provides memory mapping code to map required code pages, data structures, and I/O regions accessed in Hyp mode at the same virtual address as the host kernel virtual addresses, but which conforms to the architectural requirements for translations in Hyp mode. This interface is added in arch/arm/kvm/arm_mmu.c and comprises: - create_hyp_mappings(from, to); - create_hyp_io_mappings(from, to, phys_addr); - free_hyp_pmds(); Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
int err;
if (!is_hyp_mode_available()) {
kvm_err("HYP mode not available\n");
return -ENODEV;
}
if (kvm_target_cpu() < 0) {
kvm_err("Target CPU not supported!\n");
return -ENODEV;
}
err = init_hyp_mode();
if (err)
goto out_err;
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:09 +00:00
kvm_coproc_table_init();
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
return 0;
KVM: ARM: Hypervisor initialization Sets up KVM code to handle all exceptions taken to Hyp mode. When the kernel is booted in Hyp mode, calling an hvc instruction with r0 pointing to the new vectors, the HVBAR is changed to the the vector pointers. This allows subsystems (like KVM here) to execute code in Hyp-mode with the MMU disabled. We initialize other Hyp-mode registers and enables the MMU for Hyp-mode from the id-mapped hyp initialization code. Afterwards, the HVBAR is changed to point to KVM Hyp vectors used to catch guest faults and to switch to Hyp mode to perform a world-switch into a KVM guest. Also provides memory mapping code to map required code pages, data structures, and I/O regions accessed in Hyp mode at the same virtual address as the host kernel virtual addresses, but which conforms to the architectural requirements for translations in Hyp mode. This interface is added in arch/arm/kvm/arm_mmu.c and comprises: - create_hyp_mappings(from, to); - create_hyp_io_mappings(from, to, phys_addr); - free_hyp_pmds(); Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
out_err:
return err;
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 23:28:06 +00:00
}
/* NOP: Compiling as a module not supported */
void kvm_arch_exit(void)
{
}
static int arm_init(void)
{
int rc = kvm_init(NULL, sizeof(struct kvm_vcpu), 0, THIS_MODULE);
return rc;
}
module_init(arm_init);
Reference in New Issue Copy Permalink