linux/drivers/mtd/mtdchar.c

1201 lines
26 KiB
C
Raw Normal View History

/*
* Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/mutex.h>
#include <linux/backing-dev.h>
#include <linux/compat.h>
#include <linux/mount.h>
#include <linux/blkpg.h>
#include <linux/magic.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <asm/uaccess.h>
mtd: merge mtdchar module with mtdcore The MTD subsystem has historically tried to be as configurable as possible. The side-effect of this is that its configuration menu is rather large, and we are gradually shrinking it. For example, we recently merged partitions support with the mtdcore. This patch does the next step - it merges the mtdchar module to mtdcore. And in this case this is not only about eliminating too fine-grained separation and simplifying the configuration menu. This is also about eliminating seemingly useless kernel module. Indeed, mtdchar is a module that allows user-space making use of MTD devices via /dev/mtd* character devices. If users do not enable it, they simply cannot use MTD devices at all. They cannot read or write the flash contents. Is it a sane and useful setup? I believe not. And everyone just enables mtdchar. Having mtdchar separate is also a little bit harmful. People sometimes miss the fact that they need to enable an additional configuration option to have user-space MTD interfaces, and then they wonder why on earth the kernel does not allow using the flash? They spend time asking around. Thus, let's just get rid of this module and make it part of mtd core. Note, mtdchar had additional configuration option to enable OTP interfaces, which are present on some flashes. I removed that option as well - it saves a really tiny amount space. [dwmw2: Strictly speaking, you can mount file systems on MTD devices just fine without the mtdchar (or mtdblock) devices; you just can't do other manipulations directly on the underlying device. But still I agree that it makes sense to make this unconditional. And Yay! we get to kill off an instance of checking CONFIG_foo_MODULE, which is an abomination that should never happen.] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-14 11:27:40 +00:00
#include "mtdcore.h"
static DEFINE_MUTEX(mtd_mutex);
/*
* Data structure to hold the pointer to the mtd device as well
* as mode information of various use cases.
*/
struct mtd_file_info {
struct mtd_info *mtd;
struct inode *ino;
enum mtd_file_modes mode;
};
static loff_t mtdchar_lseek(struct file *file, loff_t offset, int orig)
{
struct mtd_file_info *mfi = file->private_data;
return fixed_size_llseek(file, offset, orig, mfi->mtd->size);
}
static int count;
static struct vfsmount *mnt;
static struct file_system_type mtd_inodefs_type;
static int mtdchar_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
int devnum = minor >> 1;
int ret = 0;
struct mtd_info *mtd;
struct mtd_file_info *mfi;
struct inode *mtd_ino;
pr_debug("MTD_open\n");
/* You can't open the RO devices RW */
if ((file->f_mode & FMODE_WRITE) && (minor & 1))
return -EACCES;
ret = simple_pin_fs(&mtd_inodefs_type, &mnt, &count);
if (ret)
return ret;
mutex_lock(&mtd_mutex);
mtd = get_mtd_device(NULL, devnum);
if (IS_ERR(mtd)) {
ret = PTR_ERR(mtd);
goto out;
}
if (mtd->type == MTD_ABSENT) {
ret = -ENODEV;
goto out1;
}
mtd_ino = iget_locked(mnt->mnt_sb, devnum);
if (!mtd_ino) {
ret = -ENOMEM;
goto out1;
}
if (mtd_ino->i_state & I_NEW) {
mtd_ino->i_private = mtd;
mtd_ino->i_mode = S_IFCHR;
mtd_ino->i_data.backing_dev_info = mtd->backing_dev_info;
unlock_new_inode(mtd_ino);
}
file->f_mapping = mtd_ino->i_mapping;
/* You can't open it RW if it's not a writeable device */
if ((file->f_mode & FMODE_WRITE) && !(mtd->flags & MTD_WRITEABLE)) {
ret = -EACCES;
goto out2;
}
mfi = kzalloc(sizeof(*mfi), GFP_KERNEL);
if (!mfi) {
ret = -ENOMEM;
goto out2;
}
mfi->ino = mtd_ino;
mfi->mtd = mtd;
file->private_data = mfi;
mutex_unlock(&mtd_mutex);
return 0;
out2:
iput(mtd_ino);
out1:
put_mtd_device(mtd);
out:
mutex_unlock(&mtd_mutex);
simple_release_fs(&mnt, &count);
return ret;
} /* mtdchar_open */
/*====================================================================*/
static int mtdchar_close(struct inode *inode, struct file *file)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
pr_debug("MTD_close\n");
/* Only sync if opened RW */
if ((file->f_mode & FMODE_WRITE))
mtd_sync(mtd);
iput(mfi->ino);
put_mtd_device(mtd);
file->private_data = NULL;
kfree(mfi);
simple_release_fs(&mnt, &count);
return 0;
} /* mtdchar_close */
/* Back in June 2001, dwmw2 wrote:
*
* FIXME: This _really_ needs to die. In 2.5, we should lock the
* userspace buffer down and use it directly with readv/writev.
*
* The implementation below, using mtd_kmalloc_up_to, mitigates
* allocation failures when the system is under low-memory situations
* or if memory is highly fragmented at the cost of reducing the
* performance of the requested transfer due to a smaller buffer size.
*
* A more complex but more memory-efficient implementation based on
* get_user_pages and iovecs to cover extents of those pages is a
* longer-term goal, as intimated by dwmw2 above. However, for the
* write case, this requires yet more complex head and tail transfer
* handling when those head and tail offsets and sizes are such that
* alignment requirements are not met in the NAND subdriver.
*/
static ssize_t mtdchar_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
size_t retlen;
size_t total_retlen=0;
int ret=0;
int len;
size_t size = count;
char *kbuf;
pr_debug("MTD_read\n");
if (*ppos + count > mtd->size)
count = mtd->size - *ppos;
if (!count)
return 0;
kbuf = mtd_kmalloc_up_to(mtd, &size);
if (!kbuf)
return -ENOMEM;
while (count) {
len = min_t(size_t, count, size);
switch (mfi->mode) {
case MTD_FILE_MODE_OTP_FACTORY:
ret = mtd_read_fact_prot_reg(mtd, *ppos, len,
&retlen, kbuf);
break;
case MTD_FILE_MODE_OTP_USER:
ret = mtd_read_user_prot_reg(mtd, *ppos, len,
&retlen, kbuf);
break;
case MTD_FILE_MODE_RAW:
{
struct mtd_oob_ops ops;
ops.mode = MTD_OPS_RAW;
ops.datbuf = kbuf;
ops.oobbuf = NULL;
ops.len = len;
ret = mtd_read_oob(mtd, *ppos, &ops);
retlen = ops.retlen;
break;
}
default:
ret = mtd_read(mtd, *ppos, len, &retlen, kbuf);
}
/* Nand returns -EBADMSG on ECC errors, but it returns
* the data. For our userspace tools it is important
* to dump areas with ECC errors!
* For kernel internal usage it also might return -EUCLEAN
* to signal the caller that a bitflip has occurred and has
* been corrected by the ECC algorithm.
* Userspace software which accesses NAND this way
* must be aware of the fact that it deals with NAND
*/
if (!ret || mtd_is_bitflip_or_eccerr(ret)) {
*ppos += retlen;
if (copy_to_user(buf, kbuf, retlen)) {
kfree(kbuf);
return -EFAULT;
}
else
total_retlen += retlen;
count -= retlen;
buf += retlen;
if (retlen == 0)
count = 0;
}
else {
kfree(kbuf);
return ret;
}
}
kfree(kbuf);
return total_retlen;
} /* mtdchar_read */
static ssize_t mtdchar_write(struct file *file, const char __user *buf, size_t count,
loff_t *ppos)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
size_t size = count;
char *kbuf;
size_t retlen;
size_t total_retlen=0;
int ret=0;
int len;
pr_debug("MTD_write\n");
if (*ppos == mtd->size)
return -ENOSPC;
if (*ppos + count > mtd->size)
count = mtd->size - *ppos;
if (!count)
return 0;
kbuf = mtd_kmalloc_up_to(mtd, &size);
if (!kbuf)
return -ENOMEM;
while (count) {
len = min_t(size_t, count, size);
if (copy_from_user(kbuf, buf, len)) {
kfree(kbuf);
return -EFAULT;
}
switch (mfi->mode) {
case MTD_FILE_MODE_OTP_FACTORY:
ret = -EROFS;
break;
case MTD_FILE_MODE_OTP_USER:
ret = mtd_write_user_prot_reg(mtd, *ppos, len,
&retlen, kbuf);
break;
case MTD_FILE_MODE_RAW:
{
struct mtd_oob_ops ops;
ops.mode = MTD_OPS_RAW;
ops.datbuf = kbuf;
ops.oobbuf = NULL;
ops.ooboffs = 0;
ops.len = len;
ret = mtd_write_oob(mtd, *ppos, &ops);
retlen = ops.retlen;
break;
}
default:
ret = mtd_write(mtd, *ppos, len, &retlen, kbuf);
}
if (!ret) {
*ppos += retlen;
total_retlen += retlen;
count -= retlen;
buf += retlen;
}
else {
kfree(kbuf);
return ret;
}
}
kfree(kbuf);
return total_retlen;
} /* mtdchar_write */
/*======================================================================
IOCTL calls for getting device parameters.
======================================================================*/
static void mtdchar_erase_callback (struct erase_info *instr)
{
wake_up((wait_queue_head_t *)instr->priv);
}
static int otp_select_filemode(struct mtd_file_info *mfi, int mode)
{
struct mtd_info *mtd = mfi->mtd;
size_t retlen;
switch (mode) {
case MTD_OTP_FACTORY:
if (mtd_read_fact_prot_reg(mtd, -1, 0, &retlen, NULL) ==
-EOPNOTSUPP)
return -EOPNOTSUPP;
mfi->mode = MTD_FILE_MODE_OTP_FACTORY;
break;
case MTD_OTP_USER:
if (mtd_read_user_prot_reg(mtd, -1, 0, &retlen, NULL) ==
-EOPNOTSUPP)
return -EOPNOTSUPP;
mfi->mode = MTD_FILE_MODE_OTP_USER;
break;
case MTD_OTP_OFF:
mfi->mode = MTD_FILE_MODE_NORMAL;
break;
default:
return -EINVAL;
}
return 0;
}
static int mtdchar_writeoob(struct file *file, struct mtd_info *mtd,
uint64_t start, uint32_t length, void __user *ptr,
uint32_t __user *retp)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_oob_ops ops;
uint32_t retlen;
int ret = 0;
if (!(file->f_mode & FMODE_WRITE))
return -EPERM;
if (length > 4096)
return -EINVAL;
if (!mtd->_write_oob)
ret = -EOPNOTSUPP;
else
ret = access_ok(VERIFY_READ, ptr, length) ? 0 : -EFAULT;
if (ret)
return ret;
ops.ooblen = length;
ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
MTD_OPS_PLACE_OOB;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
ops.oobbuf = memdup_user(ptr, length);
if (IS_ERR(ops.oobbuf))
return PTR_ERR(ops.oobbuf);
start &= ~((uint64_t)mtd->writesize - 1);
ret = mtd_write_oob(mtd, start, &ops);
if (ops.oobretlen > 0xFFFFFFFFU)
ret = -EOVERFLOW;
retlen = ops.oobretlen;
if (copy_to_user(retp, &retlen, sizeof(length)))
ret = -EFAULT;
kfree(ops.oobbuf);
return ret;
}
static int mtdchar_readoob(struct file *file, struct mtd_info *mtd,
uint64_t start, uint32_t length, void __user *ptr,
uint32_t __user *retp)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_oob_ops ops;
int ret = 0;
if (length > 4096)
return -EINVAL;
if (!access_ok(VERIFY_WRITE, ptr, length))
return -EFAULT;
ops.ooblen = length;
ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
MTD_OPS_PLACE_OOB;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
ops.oobbuf = kmalloc(length, GFP_KERNEL);
if (!ops.oobbuf)
return -ENOMEM;
start &= ~((uint64_t)mtd->writesize - 1);
ret = mtd_read_oob(mtd, start, &ops);
if (put_user(ops.oobretlen, retp))
ret = -EFAULT;
else if (ops.oobretlen && copy_to_user(ptr, ops.oobbuf,
ops.oobretlen))
ret = -EFAULT;
kfree(ops.oobbuf);
/*
* NAND returns -EBADMSG on ECC errors, but it returns the OOB
* data. For our userspace tools it is important to dump areas
* with ECC errors!
* For kernel internal usage it also might return -EUCLEAN
* to signal the caller that a bitflip has occured and has
* been corrected by the ECC algorithm.
*
* Note: currently the standard NAND function, nand_read_oob_std,
* does not calculate ECC for the OOB area, so do not rely on
* this behavior unless you have replaced it with your own.
*/
if (mtd_is_bitflip_or_eccerr(ret))
return 0;
return ret;
}
/*
* Copies (and truncates, if necessary) data from the larger struct,
* nand_ecclayout, to the smaller, deprecated layout struct,
* nand_ecclayout_user. This is necessary only to support the deprecated
* API ioctl ECCGETLAYOUT while allowing all new functionality to use
* nand_ecclayout flexibly (i.e. the struct may change size in new
* releases without requiring major rewrites).
*/
static int shrink_ecclayout(const struct nand_ecclayout *from,
struct nand_ecclayout_user *to)
{
int i;
if (!from || !to)
return -EINVAL;
memset(to, 0, sizeof(*to));
to->eccbytes = min((int)from->eccbytes, MTD_MAX_ECCPOS_ENTRIES);
for (i = 0; i < to->eccbytes; i++)
to->eccpos[i] = from->eccpos[i];
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES; i++) {
if (from->oobfree[i].length == 0 &&
from->oobfree[i].offset == 0)
break;
to->oobavail += from->oobfree[i].length;
to->oobfree[i] = from->oobfree[i];
}
return 0;
}
static int mtdchar_blkpg_ioctl(struct mtd_info *mtd,
struct blkpg_ioctl_arg __user *arg)
{
struct blkpg_ioctl_arg a;
struct blkpg_partition p;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (copy_from_user(&a, arg, sizeof(struct blkpg_ioctl_arg)))
return -EFAULT;
if (copy_from_user(&p, a.data, sizeof(struct blkpg_partition)))
return -EFAULT;
switch (a.op) {
case BLKPG_ADD_PARTITION:
/* Only master mtd device must be used to add partitions */
if (mtd_is_partition(mtd))
return -EINVAL;
return mtd_add_partition(mtd, p.devname, p.start, p.length);
case BLKPG_DEL_PARTITION:
if (p.pno < 0)
return -EINVAL;
return mtd_del_partition(mtd, p.pno);
default:
return -EINVAL;
}
}
static int mtdchar_write_ioctl(struct mtd_info *mtd,
struct mtd_write_req __user *argp)
{
struct mtd_write_req req;
struct mtd_oob_ops ops;
void __user *usr_data, *usr_oob;
int ret;
if (copy_from_user(&req, argp, sizeof(req)) ||
!access_ok(VERIFY_READ, req.usr_data, req.len) ||
!access_ok(VERIFY_READ, req.usr_oob, req.ooblen))
return -EFAULT;
if (!mtd->_write_oob)
return -EOPNOTSUPP;
ops.mode = req.mode;
ops.len = (size_t)req.len;
ops.ooblen = (size_t)req.ooblen;
ops.ooboffs = 0;
usr_data = (void __user *)(uintptr_t)req.usr_data;
usr_oob = (void __user *)(uintptr_t)req.usr_oob;
if (req.usr_data) {
ops.datbuf = memdup_user(usr_data, ops.len);
if (IS_ERR(ops.datbuf))
return PTR_ERR(ops.datbuf);
} else {
ops.datbuf = NULL;
}
if (req.usr_oob) {
ops.oobbuf = memdup_user(usr_oob, ops.ooblen);
if (IS_ERR(ops.oobbuf)) {
kfree(ops.datbuf);
return PTR_ERR(ops.oobbuf);
}
} else {
ops.oobbuf = NULL;
}
ret = mtd_write_oob(mtd, (loff_t)req.start, &ops);
kfree(ops.datbuf);
kfree(ops.oobbuf);
return ret;
}
static int mtdchar_ioctl(struct file *file, u_int cmd, u_long arg)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
void __user *argp = (void __user *)arg;
int ret = 0;
u_long size;
struct mtd_info_user info;
pr_debug("MTD_ioctl\n");
size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
if (cmd & IOC_IN) {
if (!access_ok(VERIFY_READ, argp, size))
return -EFAULT;
}
if (cmd & IOC_OUT) {
if (!access_ok(VERIFY_WRITE, argp, size))
return -EFAULT;
}
switch (cmd) {
case MEMGETREGIONCOUNT:
if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
return -EFAULT;
break;
case MEMGETREGIONINFO:
{
uint32_t ur_idx;
struct mtd_erase_region_info *kr;
struct region_info_user __user *ur = argp;
if (get_user(ur_idx, &(ur->regionindex)))
return -EFAULT;
if (ur_idx >= mtd->numeraseregions)
return -EINVAL;
kr = &(mtd->eraseregions[ur_idx]);
if (put_user(kr->offset, &(ur->offset))
|| put_user(kr->erasesize, &(ur->erasesize))
|| put_user(kr->numblocks, &(ur->numblocks)))
return -EFAULT;
break;
}
case MEMGETINFO:
memset(&info, 0, sizeof(info));
info.type = mtd->type;
info.flags = mtd->flags;
info.size = mtd->size;
info.erasesize = mtd->erasesize;
info.writesize = mtd->writesize;
info.oobsize = mtd->oobsize;
/* The below field is obsolete */
info.padding = 0;
if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
return -EFAULT;
break;
case MEMERASE:
case MEMERASE64:
{
struct erase_info *erase;
if(!(file->f_mode & FMODE_WRITE))
return -EPERM;
erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
if (!erase)
ret = -ENOMEM;
else {
wait_queue_head_t waitq;
DECLARE_WAITQUEUE(wait, current);
init_waitqueue_head(&waitq);
if (cmd == MEMERASE64) {
struct erase_info_user64 einfo64;
if (copy_from_user(&einfo64, argp,
sizeof(struct erase_info_user64))) {
kfree(erase);
return -EFAULT;
}
erase->addr = einfo64.start;
erase->len = einfo64.length;
} else {
struct erase_info_user einfo32;
if (copy_from_user(&einfo32, argp,
sizeof(struct erase_info_user))) {
kfree(erase);
return -EFAULT;
}
erase->addr = einfo32.start;
erase->len = einfo32.length;
}
erase->mtd = mtd;
erase->callback = mtdchar_erase_callback;
erase->priv = (unsigned long)&waitq;
/*
FIXME: Allow INTERRUPTIBLE. Which means
not having the wait_queue head on the stack.
If the wq_head is on the stack, and we
leave because we got interrupted, then the
wq_head is no longer there when the
callback routine tries to wake us up.
*/
ret = mtd_erase(mtd, erase);
if (!ret) {
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&waitq, &wait);
if (erase->state != MTD_ERASE_DONE &&
erase->state != MTD_ERASE_FAILED)
schedule();
remove_wait_queue(&waitq, &wait);
set_current_state(TASK_RUNNING);
ret = (erase->state == MTD_ERASE_FAILED)?-EIO:0;
}
kfree(erase);
}
break;
}
case MEMWRITEOOB:
{
struct mtd_oob_buf buf;
struct mtd_oob_buf __user *buf_user = argp;
/* NOTE: writes return length to buf_user->length */
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
ret = mtdchar_writeoob(file, mtd, buf.start, buf.length,
buf.ptr, &buf_user->length);
break;
}
case MEMREADOOB:
{
struct mtd_oob_buf buf;
struct mtd_oob_buf __user *buf_user = argp;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 01:26:58 +00:00
/* NOTE: writes return length to buf_user->start */
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
ret = mtdchar_readoob(file, mtd, buf.start, buf.length,
buf.ptr, &buf_user->start);
break;
}
case MEMWRITEOOB64:
{
struct mtd_oob_buf64 buf;
struct mtd_oob_buf64 __user *buf_user = argp;
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
ret = mtdchar_writeoob(file, mtd, buf.start, buf.length,
(void __user *)(uintptr_t)buf.usr_ptr,
&buf_user->length);
break;
}
case MEMREADOOB64:
{
struct mtd_oob_buf64 buf;
struct mtd_oob_buf64 __user *buf_user = argp;
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
ret = mtdchar_readoob(file, mtd, buf.start, buf.length,
(void __user *)(uintptr_t)buf.usr_ptr,
&buf_user->length);
break;
}
case MEMWRITE:
{
ret = mtdchar_write_ioctl(mtd,
(struct mtd_write_req __user *)arg);
break;
}
case MEMLOCK:
{
struct erase_info_user einfo;
if (copy_from_user(&einfo, argp, sizeof(einfo)))
return -EFAULT;
ret = mtd_lock(mtd, einfo.start, einfo.length);
break;
}
case MEMUNLOCK:
{
struct erase_info_user einfo;
if (copy_from_user(&einfo, argp, sizeof(einfo)))
return -EFAULT;
ret = mtd_unlock(mtd, einfo.start, einfo.length);
break;
}
case MEMISLOCKED:
{
struct erase_info_user einfo;
if (copy_from_user(&einfo, argp, sizeof(einfo)))
return -EFAULT;
ret = mtd_is_locked(mtd, einfo.start, einfo.length);
break;
}
/* Legacy interface */
case MEMGETOOBSEL:
{
struct nand_oobinfo oi;
if (!mtd->ecclayout)
return -EOPNOTSUPP;
if (mtd->ecclayout->eccbytes > ARRAY_SIZE(oi.eccpos))
return -EINVAL;
oi.useecc = MTD_NANDECC_AUTOPLACE;
memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos));
memcpy(&oi.oobfree, mtd->ecclayout->oobfree,
sizeof(oi.oobfree));
oi.eccbytes = mtd->ecclayout->eccbytes;
if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo)))
return -EFAULT;
break;
}
case MEMGETBADBLOCK:
{
loff_t offs;
if (copy_from_user(&offs, argp, sizeof(loff_t)))
return -EFAULT;
return mtd_block_isbad(mtd, offs);
break;
}
case MEMSETBADBLOCK:
{
loff_t offs;
if (copy_from_user(&offs, argp, sizeof(loff_t)))
return -EFAULT;
return mtd_block_markbad(mtd, offs);
break;
}
case OTPSELECT:
{
int mode;
if (copy_from_user(&mode, argp, sizeof(int)))
return -EFAULT;
mfi->mode = MTD_FILE_MODE_NORMAL;
ret = otp_select_filemode(mfi, mode);
file->f_pos = 0;
break;
}
case OTPGETREGIONCOUNT:
case OTPGETREGIONINFO:
{
struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
if (!buf)
return -ENOMEM;
switch (mfi->mode) {
case MTD_FILE_MODE_OTP_FACTORY:
ret = mtd_get_fact_prot_info(mtd, buf, 4096);
break;
case MTD_FILE_MODE_OTP_USER:
ret = mtd_get_user_prot_info(mtd, buf, 4096);
break;
default:
ret = -EINVAL;
break;
}
if (ret >= 0) {
if (cmd == OTPGETREGIONCOUNT) {
int nbr = ret / sizeof(struct otp_info);
ret = copy_to_user(argp, &nbr, sizeof(int));
} else
ret = copy_to_user(argp, buf, ret);
if (ret)
ret = -EFAULT;
}
kfree(buf);
break;
}
case OTPLOCK:
{
struct otp_info oinfo;
if (mfi->mode != MTD_FILE_MODE_OTP_USER)
return -EINVAL;
if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
return -EFAULT;
ret = mtd_lock_user_prot_reg(mtd, oinfo.start, oinfo.length);
break;
}
/* This ioctl is being deprecated - it truncates the ECC layout */
case ECCGETLAYOUT:
{
struct nand_ecclayout_user *usrlay;
if (!mtd->ecclayout)
return -EOPNOTSUPP;
usrlay = kmalloc(sizeof(*usrlay), GFP_KERNEL);
if (!usrlay)
return -ENOMEM;
shrink_ecclayout(mtd->ecclayout, usrlay);
if (copy_to_user(argp, usrlay, sizeof(*usrlay)))
ret = -EFAULT;
kfree(usrlay);
break;
}
case ECCGETSTATS:
{
if (copy_to_user(argp, &mtd->ecc_stats,
sizeof(struct mtd_ecc_stats)))
return -EFAULT;
break;
}
case MTDFILEMODE:
{
mfi->mode = 0;
switch(arg) {
case MTD_FILE_MODE_OTP_FACTORY:
case MTD_FILE_MODE_OTP_USER:
ret = otp_select_filemode(mfi, arg);
break;
case MTD_FILE_MODE_RAW:
if (!mtd_has_oob(mtd))
return -EOPNOTSUPP;
mfi->mode = arg;
case MTD_FILE_MODE_NORMAL:
break;
default:
ret = -EINVAL;
}
file->f_pos = 0;
break;
}
case BLKPG:
{
ret = mtdchar_blkpg_ioctl(mtd,
(struct blkpg_ioctl_arg __user *)arg);
break;
}
case BLKRRPART:
{
/* No reread partition feature. Just return ok */
ret = 0;
break;
}
default:
ret = -ENOTTY;
}
return ret;
} /* memory_ioctl */
static long mtdchar_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
{
int ret;
mutex_lock(&mtd_mutex);
ret = mtdchar_ioctl(file, cmd, arg);
mutex_unlock(&mtd_mutex);
return ret;
}
#ifdef CONFIG_COMPAT
struct mtd_oob_buf32 {
u_int32_t start;
u_int32_t length;
compat_caddr_t ptr; /* unsigned char* */
};
#define MEMWRITEOOB32 _IOWR('M', 3, struct mtd_oob_buf32)
#define MEMREADOOB32 _IOWR('M', 4, struct mtd_oob_buf32)
static long mtdchar_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
void __user *argp = compat_ptr(arg);
int ret = 0;
mutex_lock(&mtd_mutex);
switch (cmd) {
case MEMWRITEOOB32:
{
struct mtd_oob_buf32 buf;
struct mtd_oob_buf32 __user *buf_user = argp;
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
ret = mtdchar_writeoob(file, mtd, buf.start,
buf.length, compat_ptr(buf.ptr),
&buf_user->length);
break;
}
case MEMREADOOB32:
{
struct mtd_oob_buf32 buf;
struct mtd_oob_buf32 __user *buf_user = argp;
/* NOTE: writes return length to buf->start */
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
ret = mtdchar_readoob(file, mtd, buf.start,
buf.length, compat_ptr(buf.ptr),
&buf_user->start);
break;
}
default:
ret = mtdchar_ioctl(file, cmd, (unsigned long)argp);
}
mutex_unlock(&mtd_mutex);
return ret;
}
#endif /* CONFIG_COMPAT */
/*
* try to determine where a shared mapping can be made
* - only supported for NOMMU at the moment (MMU can't doesn't copy private
* mappings)
*/
#ifndef CONFIG_MMU
static unsigned long mtdchar_get_unmapped_area(struct file *file,
unsigned long addr,
unsigned long len,
unsigned long pgoff,
unsigned long flags)
{
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
unsigned long offset;
int ret;
if (addr != 0)
return (unsigned long) -EINVAL;
if (len > mtd->size || pgoff >= (mtd->size >> PAGE_SHIFT))
return (unsigned long) -EINVAL;
offset = pgoff << PAGE_SHIFT;
if (offset > mtd->size - len)
return (unsigned long) -EINVAL;
ret = mtd_get_unmapped_area(mtd, len, offset, flags);
return ret == -EOPNOTSUPP ? -ENOSYS : ret;
}
#endif
/*
* set up a mapping for shared memory segments
*/
static int mtdchar_mmap(struct file *file, struct vm_area_struct *vma)
{
#ifdef CONFIG_MMU
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
struct map_info *map = mtd->priv;
/* This is broken because it assumes the MTD device is map-based
and that mtd->priv is a valid struct map_info. It should be
replaced with something that uses the mtd_get_unmapped_area()
operation properly. */
if (0 /*mtd->type == MTD_RAM || mtd->type == MTD_ROM*/) {
#ifdef pgprot_noncached
if (file->f_flags & O_DSYNC || map->phys >= __pa(high_memory))
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
#endif
return vm_iomap_memory(vma, map->phys, map->size);
}
return -ENOSYS;
#else
return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS;
#endif
}
static const struct file_operations mtd_fops = {
.owner = THIS_MODULE,
.llseek = mtdchar_lseek,
.read = mtdchar_read,
.write = mtdchar_write,
.unlocked_ioctl = mtdchar_unlocked_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = mtdchar_compat_ioctl,
#endif
.open = mtdchar_open,
.release = mtdchar_close,
.mmap = mtdchar_mmap,
#ifndef CONFIG_MMU
.get_unmapped_area = mtdchar_get_unmapped_area,
#endif
};
static const struct super_operations mtd_ops = {
.drop_inode = generic_delete_inode,
.statfs = simple_statfs,
};
static struct dentry *mtd_inodefs_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data)
{
return mount_pseudo(fs_type, "mtd_inode:", &mtd_ops, NULL, MTD_INODE_FS_MAGIC);
}
static struct file_system_type mtd_inodefs_type = {
.name = "mtd_inodefs",
.mount = mtd_inodefs_mount,
.kill_sb = kill_anon_super,
};
fs: Limit sys_mount to only request filesystem modules. Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 03:39:14 +00:00
MODULE_ALIAS_FS("mtd_inodefs");
mtd: merge mtdchar module with mtdcore The MTD subsystem has historically tried to be as configurable as possible. The side-effect of this is that its configuration menu is rather large, and we are gradually shrinking it. For example, we recently merged partitions support with the mtdcore. This patch does the next step - it merges the mtdchar module to mtdcore. And in this case this is not only about eliminating too fine-grained separation and simplifying the configuration menu. This is also about eliminating seemingly useless kernel module. Indeed, mtdchar is a module that allows user-space making use of MTD devices via /dev/mtd* character devices. If users do not enable it, they simply cannot use MTD devices at all. They cannot read or write the flash contents. Is it a sane and useful setup? I believe not. And everyone just enables mtdchar. Having mtdchar separate is also a little bit harmful. People sometimes miss the fact that they need to enable an additional configuration option to have user-space MTD interfaces, and then they wonder why on earth the kernel does not allow using the flash? They spend time asking around. Thus, let's just get rid of this module and make it part of mtd core. Note, mtdchar had additional configuration option to enable OTP interfaces, which are present on some flashes. I removed that option as well - it saves a really tiny amount space. [dwmw2: Strictly speaking, you can mount file systems on MTD devices just fine without the mtdchar (or mtdblock) devices; you just can't do other manipulations directly on the underlying device. But still I agree that it makes sense to make this unconditional. And Yay! we get to kill off an instance of checking CONFIG_foo_MODULE, which is an abomination that should never happen.] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-14 11:27:40 +00:00
int __init init_mtdchar(void)
{
int ret;
ret = __register_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS,
"mtd", &mtd_fops);
if (ret < 0) {
pr_err("Can't allocate major number %d for MTD\n",
MTD_CHAR_MAJOR);
return ret;
}
ret = register_filesystem(&mtd_inodefs_type);
if (ret) {
pr_err("Can't register mtd_inodefs filesystem, error %d\n",
ret);
goto err_unregister_chdev;
}
return ret;
err_unregister_chdev:
__unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd");
return ret;
}
mtd: merge mtdchar module with mtdcore The MTD subsystem has historically tried to be as configurable as possible. The side-effect of this is that its configuration menu is rather large, and we are gradually shrinking it. For example, we recently merged partitions support with the mtdcore. This patch does the next step - it merges the mtdchar module to mtdcore. And in this case this is not only about eliminating too fine-grained separation and simplifying the configuration menu. This is also about eliminating seemingly useless kernel module. Indeed, mtdchar is a module that allows user-space making use of MTD devices via /dev/mtd* character devices. If users do not enable it, they simply cannot use MTD devices at all. They cannot read or write the flash contents. Is it a sane and useful setup? I believe not. And everyone just enables mtdchar. Having mtdchar separate is also a little bit harmful. People sometimes miss the fact that they need to enable an additional configuration option to have user-space MTD interfaces, and then they wonder why on earth the kernel does not allow using the flash? They spend time asking around. Thus, let's just get rid of this module and make it part of mtd core. Note, mtdchar had additional configuration option to enable OTP interfaces, which are present on some flashes. I removed that option as well - it saves a really tiny amount space. [dwmw2: Strictly speaking, you can mount file systems on MTD devices just fine without the mtdchar (or mtdblock) devices; you just can't do other manipulations directly on the underlying device. But still I agree that it makes sense to make this unconditional. And Yay! we get to kill off an instance of checking CONFIG_foo_MODULE, which is an abomination that should never happen.] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-14 11:27:40 +00:00
void __exit cleanup_mtdchar(void)
{
unregister_filesystem(&mtd_inodefs_type);
__unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd");
}
MODULE_ALIAS_CHARDEV_MAJOR(MTD_CHAR_MAJOR);