linux/drivers/gpu/drm/rcar-du/rcar_du_plane.c

466 lines
13 KiB
C
Raw Normal View History

/*
* rcar_du_plane.c -- R-Car Display Unit Planes
*
* Copyright (C) 2013-2014 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_plane_helper.h>
#include "rcar_du_drv.h"
#include "rcar_du_group.h"
#include "rcar_du_kms.h"
#include "rcar_du_plane.h"
#include "rcar_du_regs.h"
#define RCAR_DU_COLORKEY_NONE (0 << 24)
#define RCAR_DU_COLORKEY_SOURCE (1 << 24)
#define RCAR_DU_COLORKEY_MASK (1 << 24)
static void rcar_du_plane_write(struct rcar_du_group *rgrp,
unsigned int index, u32 reg, u32 data)
{
rcar_du_write(rgrp->dev, rgrp->mmio_offset + index * PLANE_OFF + reg,
data);
}
static void rcar_du_plane_setup_scanout(struct rcar_du_group *rgrp,
const struct rcar_du_plane_state *state)
{
unsigned int src_x = state->state.src_x >> 16;
unsigned int src_y = state->state.src_y >> 16;
unsigned int index = state->hwindex;
unsigned int pitch;
bool interlaced;
u32 dma[2];
interlaced = state->state.crtc->state->adjusted_mode.flags
& DRM_MODE_FLAG_INTERLACE;
if (state->source == RCAR_DU_PLANE_MEMORY) {
struct drm_framebuffer *fb = state->state.fb;
struct drm_gem_cma_object *gem;
unsigned int i;
if (state->format->planes == 2)
pitch = fb->pitches[0];
else
pitch = fb->pitches[0] * 8 / state->format->bpp;
for (i = 0; i < state->format->planes; ++i) {
gem = drm_fb_cma_get_gem_obj(fb, i);
dma[i] = gem->paddr + fb->offsets[i];
}
} else {
pitch = state->state.src_w >> 16;
dma[0] = 0;
dma[1] = 0;
}
/* Memory pitch (expressed in pixels). Must be doubled for interlaced
* operation with 32bpp formats.
*/
rcar_du_plane_write(rgrp, index, PnMWR,
(interlaced && state->format->bpp == 32) ?
pitch * 2 : pitch);
/* The Y position is expressed in raster line units and must be doubled
* for 32bpp formats, according to the R8A7790 datasheet. No mention of
* doubling the Y position is found in the R8A7779 datasheet, but the
* rule seems to apply there as well.
*
* Despite not being documented, doubling seem not to be needed when
* operating in interlaced mode.
*
* Similarly, for the second plane, NV12 and NV21 formats seem to
* require a halved Y position value, in both progressive and interlaced
* modes.
*/
rcar_du_plane_write(rgrp, index, PnSPXR, src_x);
rcar_du_plane_write(rgrp, index, PnSPYR, src_y *
(!interlaced && state->format->bpp == 32 ? 2 : 1));
rcar_du_plane_write(rgrp, index, PnDSA0R, dma[0]);
if (state->format->planes == 2) {
index = (index + 1) % 8;
rcar_du_plane_write(rgrp, index, PnMWR, pitch);
rcar_du_plane_write(rgrp, index, PnSPXR, src_x);
rcar_du_plane_write(rgrp, index, PnSPYR, src_y *
(state->format->bpp == 16 ? 2 : 1) / 2);
rcar_du_plane_write(rgrp, index, PnDSA0R, dma[1]);
}
}
static void rcar_du_plane_setup_mode(struct rcar_du_group *rgrp,
unsigned int index,
const struct rcar_du_plane_state *state)
{
u32 colorkey;
u32 pnmr;
/* The PnALPHAR register controls alpha-blending in 16bpp formats
* (ARGB1555 and XRGB1555).
*
* For ARGB, set the alpha value to 0, and enable alpha-blending when
* the A bit is 0. This maps A=0 to alpha=0 and A=1 to alpha=255.
*
* For XRGB, set the alpha value to the plane-wide alpha value and
* enable alpha-blending regardless of the X bit value.
*/
if (state->format->fourcc != DRM_FORMAT_XRGB1555)
rcar_du_plane_write(rgrp, index, PnALPHAR, PnALPHAR_ABIT_0);
else
rcar_du_plane_write(rgrp, index, PnALPHAR,
PnALPHAR_ABIT_X | state->alpha);
pnmr = PnMR_BM_MD | state->format->pnmr;
/* Disable color keying when requested. YUV formats have the
* PnMR_SPIM_TP_OFF bit set in their pnmr field, disabling color keying
* automatically.
*/
if ((state->colorkey & RCAR_DU_COLORKEY_MASK) == RCAR_DU_COLORKEY_NONE)
pnmr |= PnMR_SPIM_TP_OFF;
/* For packed YUV formats we need to select the U/V order. */
if (state->format->fourcc == DRM_FORMAT_YUYV)
pnmr |= PnMR_YCDF_YUYV;
rcar_du_plane_write(rgrp, index, PnMR, pnmr);
switch (state->format->fourcc) {
case DRM_FORMAT_RGB565:
colorkey = ((state->colorkey & 0xf80000) >> 8)
| ((state->colorkey & 0x00fc00) >> 5)
| ((state->colorkey & 0x0000f8) >> 3);
rcar_du_plane_write(rgrp, index, PnTC2R, colorkey);
break;
case DRM_FORMAT_ARGB1555:
case DRM_FORMAT_XRGB1555:
colorkey = ((state->colorkey & 0xf80000) >> 9)
| ((state->colorkey & 0x00f800) >> 6)
| ((state->colorkey & 0x0000f8) >> 3);
rcar_du_plane_write(rgrp, index, PnTC2R, colorkey);
break;
case DRM_FORMAT_XRGB8888:
case DRM_FORMAT_ARGB8888:
rcar_du_plane_write(rgrp, index, PnTC3R,
PnTC3R_CODE | (state->colorkey & 0xffffff));
break;
}
}
static void rcar_du_plane_setup_format(struct rcar_du_group *rgrp,
unsigned int index,
const struct rcar_du_plane_state *state)
{
u32 ddcr2 = PnDDCR2_CODE;
u32 ddcr4;
/* Data format
*
* The data format is selected by the DDDF field in PnMR and the EDF
* field in DDCR4.
*/
rcar_du_plane_setup_mode(rgrp, index, state);
if (state->format->planes == 2) {
if (state->hwindex != index) {
if (state->format->fourcc == DRM_FORMAT_NV12 ||
state->format->fourcc == DRM_FORMAT_NV21)
ddcr2 |= PnDDCR2_Y420;
if (state->format->fourcc == DRM_FORMAT_NV21)
ddcr2 |= PnDDCR2_NV21;
ddcr2 |= PnDDCR2_DIVU;
} else {
ddcr2 |= PnDDCR2_DIVY;
}
}
rcar_du_plane_write(rgrp, index, PnDDCR2, ddcr2);
ddcr4 = state->format->edf | PnDDCR4_CODE;
if (state->source != RCAR_DU_PLANE_MEMORY)
ddcr4 |= PnDDCR4_VSPS;
rcar_du_plane_write(rgrp, index, PnDDCR4, ddcr4);
/* Destination position and size */
rcar_du_plane_write(rgrp, index, PnDSXR, state->state.crtc_w);
rcar_du_plane_write(rgrp, index, PnDSYR, state->state.crtc_h);
rcar_du_plane_write(rgrp, index, PnDPXR, state->state.crtc_x);
rcar_du_plane_write(rgrp, index, PnDPYR, state->state.crtc_y);
/* Wrap-around and blinking, disabled */
rcar_du_plane_write(rgrp, index, PnWASPR, 0);
rcar_du_plane_write(rgrp, index, PnWAMWR, 4095);
rcar_du_plane_write(rgrp, index, PnBTR, 0);
rcar_du_plane_write(rgrp, index, PnMLR, 0);
}
void rcar_du_plane_setup(struct rcar_du_plane *plane)
{
struct rcar_du_plane_state *state =
to_rcar_plane_state(plane->plane.state);
struct rcar_du_group *rgrp = plane->group;
rcar_du_plane_setup_format(rgrp, state->hwindex, state);
if (state->format->planes == 2)
rcar_du_plane_setup_format(rgrp, (state->hwindex + 1) % 8,
state);
rcar_du_plane_setup_scanout(rgrp, state);
if (state->source == RCAR_DU_PLANE_VSPD1) {
unsigned int vspd1_sink = rgrp->index ? 2 : 0;
struct rcar_du_device *rcdu = rgrp->dev;
if (rcdu->vspd1_sink != vspd1_sink) {
rcdu->vspd1_sink = vspd1_sink;
rcar_du_set_dpad0_vsp1_routing(rcdu);
}
}
}
static int rcar_du_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
struct rcar_du_plane_state *rstate = to_rcar_plane_state(state);
struct rcar_du_plane *rplane = to_rcar_plane(plane);
struct rcar_du_device *rcdu = rplane->group->dev;
if (!state->fb || !state->crtc) {
rstate->format = NULL;
return 0;
}
if (state->src_w >> 16 != state->crtc_w ||
state->src_h >> 16 != state->crtc_h) {
dev_dbg(rcdu->dev, "%s: scaling not supported\n", __func__);
return -EINVAL;
}
rstate->format = rcar_du_format_info(state->fb->pixel_format);
if (rstate->format == NULL) {
dev_dbg(rcdu->dev, "%s: unsupported format %08x\n", __func__,
state->fb->pixel_format);
return -EINVAL;
}
return 0;
}
static void rcar_du_plane_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct rcar_du_plane *rplane = to_rcar_plane(plane);
struct rcar_du_plane_state *old_rstate;
struct rcar_du_plane_state *new_rstate;
if (!plane->state->crtc)
return;
rcar_du_plane_setup(rplane);
/* Check whether the source has changed from memory to live source or
* from live source to memory. The source has been configured by the
* VSPS bit in the PnDDCR4 register. Although the datasheet states that
* the bit is updated during vertical blanking, it seems that updates
* only occur when the DU group is held in reset through the DSYSR.DRES
* bit. We thus need to restart the group if the source changes.
*/
old_rstate = to_rcar_plane_state(old_state);
new_rstate = to_rcar_plane_state(plane->state);
if ((old_rstate->source == RCAR_DU_PLANE_MEMORY) !=
(new_rstate->source == RCAR_DU_PLANE_MEMORY))
rplane->group->need_restart = true;
}
static const struct drm_plane_helper_funcs rcar_du_plane_helper_funcs = {
.atomic_check = rcar_du_plane_atomic_check,
.atomic_update = rcar_du_plane_atomic_update,
};
static struct drm_plane_state *
rcar_du_plane_atomic_duplicate_state(struct drm_plane *plane)
{
struct rcar_du_plane_state *state;
struct rcar_du_plane_state *copy;
if (WARN_ON(!plane->state))
return NULL;
state = to_rcar_plane_state(plane->state);
copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
if (copy == NULL)
return NULL;
__drm_atomic_helper_plane_duplicate_state(plane, &copy->state);
return &copy->state;
}
static void rcar_du_plane_atomic_destroy_state(struct drm_plane *plane,
struct drm_plane_state *state)
{
__drm_atomic_helper_plane_destroy_state(plane, state);
kfree(to_rcar_plane_state(state));
}
static void rcar_du_plane_reset(struct drm_plane *plane)
{
struct rcar_du_plane_state *state;
if (plane->state) {
rcar_du_plane_atomic_destroy_state(plane, plane->state);
plane->state = NULL;
}
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (state == NULL)
return;
state->hwindex = -1;
state->source = RCAR_DU_PLANE_MEMORY;
state->alpha = 255;
state->colorkey = RCAR_DU_COLORKEY_NONE;
state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : 1;
plane->state = &state->state;
plane->state->plane = plane;
}
static int rcar_du_plane_atomic_set_property(struct drm_plane *plane,
struct drm_plane_state *state,
struct drm_property *property,
uint64_t val)
{
struct rcar_du_plane_state *rstate = to_rcar_plane_state(state);
struct rcar_du_device *rcdu = to_rcar_plane(plane)->group->dev;
if (property == rcdu->props.alpha)
rstate->alpha = val;
else if (property == rcdu->props.colorkey)
rstate->colorkey = val;
else if (property == rcdu->props.zpos)
rstate->zpos = val;
else
return -EINVAL;
return 0;
}
static int rcar_du_plane_atomic_get_property(struct drm_plane *plane,
const struct drm_plane_state *state, struct drm_property *property,
uint64_t *val)
{
const struct rcar_du_plane_state *rstate =
container_of(state, const struct rcar_du_plane_state, state);
struct rcar_du_device *rcdu = to_rcar_plane(plane)->group->dev;
if (property == rcdu->props.alpha)
*val = rstate->alpha;
else if (property == rcdu->props.colorkey)
*val = rstate->colorkey;
else if (property == rcdu->props.zpos)
*val = rstate->zpos;
else
return -EINVAL;
return 0;
}
static const struct drm_plane_funcs rcar_du_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.reset = rcar_du_plane_reset,
.set_property = drm_atomic_helper_plane_set_property,
.destroy = drm_plane_cleanup,
.atomic_duplicate_state = rcar_du_plane_atomic_duplicate_state,
.atomic_destroy_state = rcar_du_plane_atomic_destroy_state,
.atomic_set_property = rcar_du_plane_atomic_set_property,
.atomic_get_property = rcar_du_plane_atomic_get_property,
};
static const uint32_t formats[] = {
DRM_FORMAT_RGB565,
DRM_FORMAT_ARGB1555,
DRM_FORMAT_XRGB1555,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_UYVY,
DRM_FORMAT_YUYV,
DRM_FORMAT_NV12,
DRM_FORMAT_NV21,
DRM_FORMAT_NV16,
};
int rcar_du_planes_init(struct rcar_du_group *rgrp)
{
struct rcar_du_device *rcdu = rgrp->dev;
unsigned int crtcs;
unsigned int i;
int ret;
/* Create one primary plane per CRTC in this group and seven overlay
* planes.
*/
rgrp->num_planes = rgrp->num_crtcs + 7;
crtcs = ((1 << rcdu->num_crtcs) - 1) & (3 << (2 * rgrp->index));
for (i = 0; i < rgrp->num_planes; ++i) {
enum drm_plane_type type = i < rgrp->num_crtcs
? DRM_PLANE_TYPE_PRIMARY
: DRM_PLANE_TYPE_OVERLAY;
struct rcar_du_plane *plane = &rgrp->planes[i];
plane->group = rgrp;
ret = drm_universal_plane_init(rcdu->ddev, &plane->plane, crtcs,
&rcar_du_plane_funcs, formats,
drm: Pass 'name' to drm_universal_plane_init() Done with coccinelle for the most part. It choked on msm/mdp/mdp5/mdp5_plane.c like so: "BAD:!!!!! enum drm_plane_type type;" No idea how to deal with that, so I just fixed that up by hand. Also it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. I didn't convert drm_plane_init() since passing the varargs through would mean either cpp macros or va_list, and I figured we don't care about these legacy functions enough to warrant the extra pain. @@ typedef uint32_t; identifier dev, plane, possible_crtcs, funcs, formats, format_count, type; @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, plane, possible_crtcs, funcs, formats, format_count, type; @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4, E5, E6, E7; @@ drm_universal_plane_init(E1, E2, E3, E4, E5, E6, E7 + ,NULL ) v2: Split crtc and plane changes apart Pass NUL for no-name instead of "" Leave drm_plane_init() alone v3: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670795-2853-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-09 14:19:55 +00:00
ARRAY_SIZE(formats), type,
NULL);
if (ret < 0)
return ret;
drm_plane_helper_add(&plane->plane,
&rcar_du_plane_helper_funcs);
if (type == DRM_PLANE_TYPE_PRIMARY)
continue;
drm_object_attach_property(&plane->plane.base,
rcdu->props.alpha, 255);
drm_object_attach_property(&plane->plane.base,
rcdu->props.colorkey,
RCAR_DU_COLORKEY_NONE);
drm_object_attach_property(&plane->plane.base,
rcdu->props.zpos, 1);
}
return 0;
}