2005-04-16 22:20:36 +00:00
|
|
|
/*
|
2007-02-06 00:28:25 +00:00
|
|
|
* TURBOchannel bus services.
|
2005-04-16 22:20:36 +00:00
|
|
|
*
|
2007-02-06 00:28:25 +00:00
|
|
|
* Copyright (c) Harald Koerfgen, 1998
|
TC: Set DMA masks for devices
Fix a TURBOchannel support regression with commit 205e1b7f51e4
("dma-mapping: warn when there is no coherent_dma_mask") that caused
coherent DMA allocations to produce a warning such as:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2
Stack : ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650
0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff
0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8
98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff
0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0
0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000
9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940
0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940
...
Call Trace:
[<ffffffff8004dc78>] show_stack+0xa0/0x130
[<ffffffff80067940>] __warn+0x128/0x170
---[ end trace b1d1e094f67f3bb2 ]---
This is because the TURBOchannel bus driver fails to set the coherent
DMA mask for devices enumerated.
Set the regular and coherent DMA masks for TURBOchannel devices then,
observing that the bus protocol supports a 34-bit (16GiB) DMA address
space, by interpreting the value presented in the address cycle across
the 32 `ad' lines as a 32-bit word rather than byte address[1]. The
architectural size of the TURBOchannel DMA address space exceeds the
maximum amount of RAM any actual TURBOchannel system in existence may
have, hence both masks are the same.
This removes the warning shown above.
References:
[1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital
Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20835/
Fixes: 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask")
Cc: stable@vger.kernel.org # 4.16+
Cc: Ralf Baechle <ralf@linux-mips.org>
2018-10-03 12:21:07 +00:00
|
|
|
* Copyright (c) 2001, 2003, 2005, 2006, 2018 Maciej W. Rozycki
|
2007-02-06 00:28:25 +00:00
|
|
|
* Copyright (c) 2005 James Simmons
|
2005-04-16 22:20:36 +00:00
|
|
|
*
|
2007-02-06 00:28:25 +00:00
|
|
|
* This file is subject to the terms and conditions of the GNU
|
|
|
|
* General Public License. See the file "COPYING" in the main
|
|
|
|
* directory of this archive for more details.
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
2007-02-06 00:28:25 +00:00
|
|
|
#include <linux/compiler.h>
|
TC: Set DMA masks for devices
Fix a TURBOchannel support regression with commit 205e1b7f51e4
("dma-mapping: warn when there is no coherent_dma_mask") that caused
coherent DMA allocations to produce a warning such as:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2
Stack : ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650
0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff
0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8
98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff
0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0
0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000
9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940
0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940
...
Call Trace:
[<ffffffff8004dc78>] show_stack+0xa0/0x130
[<ffffffff80067940>] __warn+0x128/0x170
---[ end trace b1d1e094f67f3bb2 ]---
This is because the TURBOchannel bus driver fails to set the coherent
DMA mask for devices enumerated.
Set the regular and coherent DMA masks for TURBOchannel devices then,
observing that the bus protocol supports a 34-bit (16GiB) DMA address
space, by interpreting the value presented in the address cycle across
the 32 `ad' lines as a 32-bit word rather than byte address[1]. The
architectural size of the TURBOchannel DMA address space exceeds the
maximum amount of RAM any actual TURBOchannel system in existence may
have, hence both masks are the same.
This removes the warning shown above.
References:
[1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital
Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20835/
Fixes: 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask")
Cc: stable@vger.kernel.org # 4.16+
Cc: Ralf Baechle <ralf@linux-mips.org>
2018-10-03 12:21:07 +00:00
|
|
|
#include <linux/dma-mapping.h>
|
2007-02-06 00:28:25 +00:00
|
|
|
#include <linux/errno.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/init.h>
|
2007-02-06 00:28:25 +00:00
|
|
|
#include <linux/ioport.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/kernel.h>
|
2007-02-06 00:28:25 +00:00
|
|
|
#include <linux/list.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/module.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
|
|
|
#include <linux/slab.h>
|
2005-07-01 16:10:40 +00:00
|
|
|
#include <linux/string.h>
|
2007-02-06 00:28:25 +00:00
|
|
|
#include <linux/tc.h>
|
2005-07-01 16:10:40 +00:00
|
|
|
#include <linux/types.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-07-01 16:10:40 +00:00
|
|
|
#include <asm/io.h>
|
|
|
|
|
2007-02-06 00:28:25 +00:00
|
|
|
static struct tc_bus tc_bus = {
|
|
|
|
.name = "TURBOchannel",
|
|
|
|
};
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
2007-02-06 00:28:25 +00:00
|
|
|
* Probing for TURBOchannel modules.
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
2007-02-06 00:28:25 +00:00
|
|
|
static void __init tc_bus_add_devices(struct tc_bus *tbus)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2007-02-06 00:28:25 +00:00
|
|
|
resource_size_t slotsize = tbus->info.slot_size << 20;
|
|
|
|
resource_size_t extslotsize = tbus->ext_slot_size;
|
|
|
|
resource_size_t slotaddr;
|
|
|
|
resource_size_t extslotaddr;
|
|
|
|
resource_size_t devsize;
|
|
|
|
void __iomem *module;
|
|
|
|
struct tc_dev *tdev;
|
2005-04-16 22:20:36 +00:00
|
|
|
int i, slot, err;
|
2005-07-01 16:10:40 +00:00
|
|
|
u8 pattern[4];
|
2007-02-06 00:28:25 +00:00
|
|
|
long offset;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-02-06 00:28:25 +00:00
|
|
|
for (slot = 0; slot < tbus->num_tcslots; slot++) {
|
|
|
|
slotaddr = tbus->slot_base + slot * slotsize;
|
|
|
|
extslotaddr = tbus->ext_slot_base + slot * extslotsize;
|
2020-01-06 08:43:50 +00:00
|
|
|
module = ioremap(slotaddr, slotsize);
|
2005-07-01 16:10:40 +00:00
|
|
|
BUG_ON(!module);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-02-06 00:28:25 +00:00
|
|
|
offset = TC_OLDCARD;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
err = 0;
|
2007-02-06 00:28:25 +00:00
|
|
|
err |= tc_preadb(pattern + 0, module + offset + TC_PATTERN0);
|
|
|
|
err |= tc_preadb(pattern + 1, module + offset + TC_PATTERN1);
|
|
|
|
err |= tc_preadb(pattern + 2, module + offset + TC_PATTERN2);
|
|
|
|
err |= tc_preadb(pattern + 3, module + offset + TC_PATTERN3);
|
|
|
|
if (err)
|
|
|
|
goto out_err;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (pattern[0] != 0x55 || pattern[1] != 0x00 ||
|
|
|
|
pattern[2] != 0xaa || pattern[3] != 0xff) {
|
2007-02-06 00:28:25 +00:00
|
|
|
offset = TC_NEWCARD;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
err = 0;
|
2007-02-06 00:28:25 +00:00
|
|
|
err |= tc_preadb(pattern + 0,
|
|
|
|
module + offset + TC_PATTERN0);
|
|
|
|
err |= tc_preadb(pattern + 1,
|
|
|
|
module + offset + TC_PATTERN1);
|
|
|
|
err |= tc_preadb(pattern + 2,
|
|
|
|
module + offset + TC_PATTERN2);
|
|
|
|
err |= tc_preadb(pattern + 3,
|
|
|
|
module + offset + TC_PATTERN3);
|
|
|
|
if (err)
|
|
|
|
goto out_err;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (pattern[0] != 0x55 || pattern[1] != 0x00 ||
|
2007-02-06 00:28:25 +00:00
|
|
|
pattern[2] != 0xaa || pattern[3] != 0xff)
|
|
|
|
goto out_err;
|
|
|
|
|
|
|
|
/* Found a board, allocate it an entry in the list */
|
|
|
|
tdev = kzalloc(sizeof(*tdev), GFP_KERNEL);
|
|
|
|
if (!tdev) {
|
2014-04-06 19:52:37 +00:00
|
|
|
pr_err("tc%x: unable to allocate tc_dev\n", slot);
|
2007-02-06 00:28:25 +00:00
|
|
|
goto out_err;
|
2005-07-01 16:10:40 +00:00
|
|
|
}
|
2009-03-24 23:38:22 +00:00
|
|
|
dev_set_name(&tdev->dev, "tc%x", slot);
|
2007-02-06 00:28:25 +00:00
|
|
|
tdev->bus = tbus;
|
|
|
|
tdev->dev.parent = &tbus->dev;
|
|
|
|
tdev->dev.bus = &tc_bus_type;
|
|
|
|
tdev->slot = slot;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
TC: Set DMA masks for devices
Fix a TURBOchannel support regression with commit 205e1b7f51e4
("dma-mapping: warn when there is no coherent_dma_mask") that caused
coherent DMA allocations to produce a warning such as:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2
Stack : ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650
0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff
0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8
98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff
0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0
0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000
9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940
0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940
...
Call Trace:
[<ffffffff8004dc78>] show_stack+0xa0/0x130
[<ffffffff80067940>] __warn+0x128/0x170
---[ end trace b1d1e094f67f3bb2 ]---
This is because the TURBOchannel bus driver fails to set the coherent
DMA mask for devices enumerated.
Set the regular and coherent DMA masks for TURBOchannel devices then,
observing that the bus protocol supports a 34-bit (16GiB) DMA address
space, by interpreting the value presented in the address cycle across
the 32 `ad' lines as a 32-bit word rather than byte address[1]. The
architectural size of the TURBOchannel DMA address space exceeds the
maximum amount of RAM any actual TURBOchannel system in existence may
have, hence both masks are the same.
This removes the warning shown above.
References:
[1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital
Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20835/
Fixes: 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask")
Cc: stable@vger.kernel.org # 4.16+
Cc: Ralf Baechle <ralf@linux-mips.org>
2018-10-03 12:21:07 +00:00
|
|
|
/* TURBOchannel has 34-bit DMA addressing (16GiB space). */
|
|
|
|
tdev->dma_mask = DMA_BIT_MASK(34);
|
|
|
|
tdev->dev.dma_mask = &tdev->dma_mask;
|
|
|
|
tdev->dev.coherent_dma_mask = DMA_BIT_MASK(34);
|
|
|
|
|
2005-07-01 16:10:40 +00:00
|
|
|
for (i = 0; i < 8; i++) {
|
2007-02-06 00:28:25 +00:00
|
|
|
tdev->firmware[i] =
|
|
|
|
readb(module + offset + TC_FIRM_VER + 4 * i);
|
|
|
|
tdev->vendor[i] =
|
|
|
|
readb(module + offset + TC_VENDOR + 4 * i);
|
|
|
|
tdev->name[i] =
|
|
|
|
readb(module + offset + TC_MODULE + 4 * i);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2007-02-06 00:28:25 +00:00
|
|
|
tdev->firmware[8] = 0;
|
|
|
|
tdev->vendor[8] = 0;
|
|
|
|
tdev->name[8] = 0;
|
|
|
|
|
2009-03-24 23:38:22 +00:00
|
|
|
pr_info("%s: %s %s %s\n", dev_name(&tdev->dev), tdev->vendor,
|
2007-02-06 00:28:25 +00:00
|
|
|
tdev->name, tdev->firmware);
|
|
|
|
|
|
|
|
devsize = readb(module + offset + TC_SLOT_SIZE);
|
|
|
|
devsize <<= 22;
|
|
|
|
if (devsize <= slotsize) {
|
|
|
|
tdev->resource.start = slotaddr;
|
|
|
|
tdev->resource.end = slotaddr + devsize - 1;
|
|
|
|
} else if (devsize <= extslotsize) {
|
|
|
|
tdev->resource.start = extslotaddr;
|
|
|
|
tdev->resource.end = extslotaddr + devsize - 1;
|
|
|
|
} else {
|
2014-04-06 19:52:37 +00:00
|
|
|
pr_err("%s: Cannot provide slot space "
|
|
|
|
"(%ldMiB required, up to %ldMiB supported)\n",
|
|
|
|
dev_name(&tdev->dev), (long)(devsize >> 20),
|
|
|
|
(long)(max(slotsize, extslotsize) >> 20));
|
2007-02-06 00:28:25 +00:00
|
|
|
kfree(tdev);
|
|
|
|
goto out_err;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2007-02-06 00:28:25 +00:00
|
|
|
tdev->resource.name = tdev->name;
|
|
|
|
tdev->resource.flags = IORESOURCE_MEM;
|
|
|
|
|
|
|
|
tc_device_get_irq(tdev);
|
2005-07-01 16:10:40 +00:00
|
|
|
|
2014-04-02 10:00:37 +00:00
|
|
|
if (device_register(&tdev->dev)) {
|
|
|
|
put_device(&tdev->dev);
|
|
|
|
goto out_err;
|
|
|
|
}
|
2007-02-06 00:28:25 +00:00
|
|
|
list_add_tail(&tdev->node, &tbus->devices);
|
|
|
|
|
|
|
|
out_err:
|
2005-07-01 16:10:40 +00:00
|
|
|
iounmap(module);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2007-02-06 00:28:25 +00:00
|
|
|
* The main entry.
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
2005-06-16 20:37:40 +00:00
|
|
|
static int __init tc_init(void)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2007-02-06 00:28:25 +00:00
|
|
|
/* Initialize the TURBOchannel bus */
|
|
|
|
if (tc_bus_get_info(&tc_bus))
|
2014-04-06 19:52:37 +00:00
|
|
|
goto out_err;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-02-06 00:28:25 +00:00
|
|
|
INIT_LIST_HEAD(&tc_bus.devices);
|
2009-03-24 23:38:22 +00:00
|
|
|
dev_set_name(&tc_bus.dev, "tc");
|
2014-04-06 19:52:37 +00:00
|
|
|
if (device_register(&tc_bus.dev))
|
|
|
|
goto out_err_device;
|
2007-02-06 00:28:25 +00:00
|
|
|
|
|
|
|
if (tc_bus.info.slot_size) {
|
|
|
|
unsigned int tc_clock = tc_get_speed(&tc_bus) / 100000;
|
|
|
|
|
|
|
|
pr_info("tc: TURBOchannel rev. %d at %d.%d MHz "
|
|
|
|
"(with%s parity)\n", tc_bus.info.revision,
|
|
|
|
tc_clock / 10, tc_clock % 10,
|
|
|
|
tc_bus.info.parity ? "" : "out");
|
|
|
|
|
|
|
|
tc_bus.resource[0].start = tc_bus.slot_base;
|
|
|
|
tc_bus.resource[0].end = tc_bus.slot_base +
|
|
|
|
(tc_bus.info.slot_size << 20) *
|
2007-02-06 00:28:26 +00:00
|
|
|
tc_bus.num_tcslots - 1;
|
2007-02-06 00:28:25 +00:00
|
|
|
tc_bus.resource[0].name = tc_bus.name;
|
|
|
|
tc_bus.resource[0].flags = IORESOURCE_MEM;
|
|
|
|
if (request_resource(&iomem_resource,
|
|
|
|
&tc_bus.resource[0]) < 0) {
|
2014-04-06 19:52:37 +00:00
|
|
|
pr_err("tc: Cannot reserve resource\n");
|
|
|
|
goto out_err_device;
|
2007-02-06 00:28:25 +00:00
|
|
|
}
|
|
|
|
if (tc_bus.ext_slot_size) {
|
|
|
|
tc_bus.resource[1].start = tc_bus.ext_slot_base;
|
|
|
|
tc_bus.resource[1].end = tc_bus.ext_slot_base +
|
|
|
|
tc_bus.ext_slot_size *
|
2007-02-06 00:28:26 +00:00
|
|
|
tc_bus.num_tcslots - 1;
|
2007-02-06 00:28:25 +00:00
|
|
|
tc_bus.resource[1].name = tc_bus.name;
|
|
|
|
tc_bus.resource[1].flags = IORESOURCE_MEM;
|
|
|
|
if (request_resource(&iomem_resource,
|
|
|
|
&tc_bus.resource[1]) < 0) {
|
2014-04-06 19:52:37 +00:00
|
|
|
pr_err("tc: Cannot reserve resource\n");
|
|
|
|
goto out_err_resource;
|
2007-02-06 00:28:25 +00:00
|
|
|
}
|
2005-07-01 16:10:40 +00:00
|
|
|
}
|
2007-02-06 00:28:25 +00:00
|
|
|
|
|
|
|
tc_bus_add_devices(&tc_bus);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2005-06-16 20:37:40 +00:00
|
|
|
|
|
|
|
return 0;
|
2014-04-06 19:52:37 +00:00
|
|
|
|
|
|
|
out_err_resource:
|
|
|
|
release_resource(&tc_bus.resource[0]);
|
|
|
|
out_err_device:
|
|
|
|
put_device(&tc_bus.dev);
|
|
|
|
out_err:
|
|
|
|
return 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
subsys_initcall(tc_init);
|