linux/fs/proc/array.c

823 lines
23 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/proc/array.c
*
* Copyright (C) 1992 by Linus Torvalds
* based on ideas by Darren Senn
*
* Fixes:
* Michael. K. Johnson: stat,statm extensions.
* <johnsonm@stolaf.edu>
*
* Pauline Middelink : Made cmdline,envline only break at '\0's, to
* make sure SET_PROCTITLE works. Also removed
* bad '!' which forced address recalculation for
* EVERY character on the current page.
* <middelin@polyware.iaf.nl>
*
* Danny ter Haar : added cpuinfo
* <dth@cistron.nl>
*
* Alessandro Rubini : profile extension.
* <rubini@ipvvis.unipv.it>
*
* Jeff Tranter : added BogoMips field to cpuinfo
* <Jeff_Tranter@Mitel.COM>
*
* Bruno Haible : remove 4K limit for the maps file
* <haible@ma2s2.mathematik.uni-karlsruhe.de>
*
* Yves Arrouye : remove removal of trailing spaces in get_array.
* <Yves.Arrouye@marin.fdn.fr>
*
* Jerome Forissier : added per-CPU time information to /proc/stat
* and /proc/<pid>/cpu extension
* <forissier@isia.cma.fr>
* - Incorporation and non-SMP safe operation
* of forissier patch in 2.1.78 by
* Hans Marcus <crowbar@concepts.nl>
*
* aeb@cwi.nl : /proc/partitions
*
*
* Alan Cox : security fixes.
* <alan@lxorguk.ukuu.org.uk>
*
* Al Viro : safe handling of mm_struct
*
* Gerhard Wichert : added BIGMEM support
* Siemens AG <Gerhard.Wichert@pdb.siemens.de>
*
* Al Viro & Jeff Garzik : moved most of the thing into base.c and
* : proc_misc.c. The rest may eventually go into
* : base.c too.
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/time_namespace.h>
#include <linux/kernel.h>
#include <linux/kernel_stat.h>
#include <linux/tty.h>
#include <linux/string.h>
#include <linux/mman.h>
#include <linux/sched/mm.h>
#include <linux/sched/numa_balancing.h>
fs/proc: Report eip/esp in /prod/PID/stat for coredumping Commit 0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in /proc/PID/stat") stopped reporting eip/esp because it is racy and dangerous for executing tasks. The comment adds: As far as I know, there are no use programs that make any material use of these fields, so just get rid of them. However, existing userspace core-dump-handler applications (for example, minicoredumper) are using these fields since they provide an excellent cross-platform interface to these valuable pointers. So that commit introduced a user space visible regression. Partially revert the change and make the readout possible for tasks with the proper permissions and only if the target task has the PF_DUMPCORE flag set. Fixes: 0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in> /proc/PID/stat") Reported-by: Marco Felsch <marco.felsch@preh.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: Tycho Andersen <tycho.andersen@canonical.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: stable@vger.kernel.org Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Borislav Petkov <bp@alien8.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linux API <linux-api@vger.kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/87poatfwg6.fsf@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-09-14 09:42:17 +00:00
#include <linux/sched/task_stack.h>
#include <linux/sched/task.h>
#include <linux/sched/cputime.h>
#include <linux/proc_fs.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
#include <linux/smp.h>
#include <linux/signal.h>
#include <linux/highmem.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/times.h>
#include <linux/cpuset.h>
#include <linux/rcupdate.h>
#include <linux/delayacct.h>
#include <linux/seq_file.h>
#include <linux/pid_namespace.h>
#include <linux/prctl.h>
#include <linux/ptrace.h>
#include <linux/string_helpers.h>
#include <linux/user_namespace.h>
#include <linux/fs_struct.h>
kthread: dynamically allocate memory to store kthread's full name When I was implementing a new per-cpu kthread cfs_migration, I found the comm of it "cfs_migration/%u" is truncated due to the limitation of TASK_COMM_LEN. For example, the comm of the percpu thread on CPU10~19 all have the same name "cfs_migration/1", which will confuse the user. This issue is not critical, because we can get the corresponding CPU from the task's Cpus_allowed. But for kthreads corresponding to other hardware devices, it is not easy to get the detailed device info from task comm, for example, jbd2/nvme0n1p2- xfs-reclaim/sdf Currently there are so many truncated kthreads: rcu_tasks_kthre rcu_tasks_rude_ rcu_tasks_trace poll_mpt3sas0_s ext4-rsv-conver xfs-reclaim/sd{a, b, c, ...} xfs-blockgc/sd{a, b, c, ...} xfs-inodegc/sd{a, b, c, ...} audit_send_repl ecryptfs-kthrea vfio-irqfd-clea jbd2/nvme0n1p2- ... We can shorten these names to work around this problem, but it may be not applied to all of the truncated kthreads. Take 'jbd2/nvme0n1p2-' for example, it is a nice name, and it is not a good idea to shorten it. One possible way to fix this issue is extending the task comm size, but as task->comm is used in lots of places, that may cause some potential buffer overflows. Another more conservative approach is introducing a new pointer to store kthread's full name if it is truncated, which won't introduce too much overhead as it is in the non-critical path. Finally we make a dicision to use the second approach. See also the discussions in this thread: https://lore.kernel.org/lkml/20211101060419.4682-1-laoar.shao@gmail.com/ After this change, the full name of these truncated kthreads will be displayed via /proc/[pid]/comm: rcu_tasks_kthread rcu_tasks_rude_kthread rcu_tasks_trace_kthread poll_mpt3sas0_statu ext4-rsv-conversion xfs-reclaim/sdf1 xfs-blockgc/sdf1 xfs-inodegc/sdf1 audit_send_reply ecryptfs-kthread vfio-irqfd-cleanup jbd2/nvme0n1p2-8 Link: https://lkml.kernel.org/r/20211120112850.46047-1-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Suggested-by: Petr Mladek <pmladek@suse.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-20 02:08:43 +00:00
#include <linux/kthread.h>
#include <linux/mmu_context.h>
#include <asm/processor.h>
#include "internal.h"
void proc_task_name(struct seq_file *m, struct task_struct *p, bool escape)
{
char tcomm[64];
/*
* Test before PF_KTHREAD because all workqueue worker threads are
* kernel threads.
*/
if (p->flags & PF_WQ_WORKER)
wq_worker_comm(tcomm, sizeof(tcomm), p);
kthread: dynamically allocate memory to store kthread's full name When I was implementing a new per-cpu kthread cfs_migration, I found the comm of it "cfs_migration/%u" is truncated due to the limitation of TASK_COMM_LEN. For example, the comm of the percpu thread on CPU10~19 all have the same name "cfs_migration/1", which will confuse the user. This issue is not critical, because we can get the corresponding CPU from the task's Cpus_allowed. But for kthreads corresponding to other hardware devices, it is not easy to get the detailed device info from task comm, for example, jbd2/nvme0n1p2- xfs-reclaim/sdf Currently there are so many truncated kthreads: rcu_tasks_kthre rcu_tasks_rude_ rcu_tasks_trace poll_mpt3sas0_s ext4-rsv-conver xfs-reclaim/sd{a, b, c, ...} xfs-blockgc/sd{a, b, c, ...} xfs-inodegc/sd{a, b, c, ...} audit_send_repl ecryptfs-kthrea vfio-irqfd-clea jbd2/nvme0n1p2- ... We can shorten these names to work around this problem, but it may be not applied to all of the truncated kthreads. Take 'jbd2/nvme0n1p2-' for example, it is a nice name, and it is not a good idea to shorten it. One possible way to fix this issue is extending the task comm size, but as task->comm is used in lots of places, that may cause some potential buffer overflows. Another more conservative approach is introducing a new pointer to store kthread's full name if it is truncated, which won't introduce too much overhead as it is in the non-critical path. Finally we make a dicision to use the second approach. See also the discussions in this thread: https://lore.kernel.org/lkml/20211101060419.4682-1-laoar.shao@gmail.com/ After this change, the full name of these truncated kthreads will be displayed via /proc/[pid]/comm: rcu_tasks_kthread rcu_tasks_rude_kthread rcu_tasks_trace_kthread poll_mpt3sas0_statu ext4-rsv-conversion xfs-reclaim/sdf1 xfs-blockgc/sdf1 xfs-inodegc/sdf1 audit_send_reply ecryptfs-kthread vfio-irqfd-cleanup jbd2/nvme0n1p2-8 Link: https://lkml.kernel.org/r/20211120112850.46047-1-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Suggested-by: Petr Mladek <pmladek@suse.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-20 02:08:43 +00:00
else if (p->flags & PF_KTHREAD)
get_kthread_comm(tcomm, sizeof(tcomm), p);
else
__get_task_comm(tcomm, sizeof(tcomm), p);
if (escape)
seq_escape_str(m, tcomm, ESCAPE_SPACE | ESCAPE_SPECIAL, "\n\\");
else
seq_printf(m, "%.64s", tcomm);
}
/*
* The task state array is a strange "bitmap" of
* reasons to sleep. Thus "running" is zero, and
* you can test for combinations of others with
* simple bit tests.
*/
static const char * const task_state_array[] = {
/* states in TASK_REPORT: */
"R (running)", /* 0x00 */
"S (sleeping)", /* 0x01 */
"D (disk sleep)", /* 0x02 */
"T (stopped)", /* 0x04 */
"t (tracing stop)", /* 0x08 */
"X (dead)", /* 0x10 */
"Z (zombie)", /* 0x20 */
"P (parked)", /* 0x40 */
/* states beyond TASK_REPORT: */
"I (idle)", /* 0x80 */
};
static inline const char *get_task_state(struct task_struct *tsk)
{
BUILD_BUG_ON(1 + ilog2(TASK_REPORT_MAX) != ARRAY_SIZE(task_state_array));
return task_state_array[task_state_index(tsk)];
}
static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *p)
{
struct user_namespace *user_ns = seq_user_ns(m);
struct group_info *group_info;
int g, umask = -1;
struct task_struct *tracer;
const struct cred *cred;
pid_t ppid, tpid = 0, tgid, ngid;
unsigned int max_fds = 0;
rcu_read_lock();
ppid = pid_alive(p) ?
task_tgid_nr_ns(rcu_dereference(p->real_parent), ns) : 0;
tracer = ptrace_parent(p);
if (tracer)
tpid = task_pid_nr_ns(tracer, ns);
tgid = task_tgid_nr_ns(p, ns);
ngid = task_numa_group_id(p);
CRED: Fix get_task_cred() and task_state() to not resurrect dead credentials It's possible for get_task_cred() as it currently stands to 'corrupt' a set of credentials by incrementing their usage count after their replacement by the task being accessed. What happens is that get_task_cred() can race with commit_creds(): TASK_1 TASK_2 RCU_CLEANER -->get_task_cred(TASK_2) rcu_read_lock() __cred = __task_cred(TASK_2) -->commit_creds() old_cred = TASK_2->real_cred TASK_2->real_cred = ... put_cred(old_cred) call_rcu(old_cred) [__cred->usage == 0] get_cred(__cred) [__cred->usage == 1] rcu_read_unlock() -->put_cred_rcu() [__cred->usage == 1] panic() However, since a tasks credentials are generally not changed very often, we can reasonably make use of a loop involving reading the creds pointer and using atomic_inc_not_zero() to attempt to increment it if it hasn't already hit zero. If successful, we can safely return the credentials in the knowledge that, even if the task we're accessing has released them, they haven't gone to the RCU cleanup code. We then change task_state() in procfs to use get_task_cred() rather than calling get_cred() on the result of __task_cred(), as that suffers from the same problem. Without this change, a BUG_ON in __put_cred() or in put_cred_rcu() can be tripped when it is noticed that the usage count is not zero as it ought to be, for example: kernel BUG at kernel/cred.c:168! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/kernel/mm/ksm/run CPU 0 Pid: 2436, comm: master Not tainted 2.6.33.3-85.fc13.x86_64 #1 0HR330/OptiPlex 745 RIP: 0010:[<ffffffff81069881>] [<ffffffff81069881>] __put_cred+0xc/0x45 RSP: 0018:ffff88019e7e9eb8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff880161514480 RCX: 00000000ffffffff RDX: 00000000ffffffff RSI: ffff880140c690c0 RDI: ffff880140c690c0 RBP: ffff88019e7e9eb8 R08: 00000000000000d0 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000040 R12: ffff880140c690c0 R13: ffff88019e77aea0 R14: 00007fff336b0a5c R15: 0000000000000001 FS: 00007f12f50d97c0(0000) GS:ffff880007400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f461bc000 CR3: 00000001b26ce000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process master (pid: 2436, threadinfo ffff88019e7e8000, task ffff88019e77aea0) Stack: ffff88019e7e9ec8 ffffffff810698cd ffff88019e7e9ef8 ffffffff81069b45 <0> ffff880161514180 ffff880161514480 ffff880161514180 0000000000000000 <0> ffff88019e7e9f28 ffffffff8106aace 0000000000000001 0000000000000246 Call Trace: [<ffffffff810698cd>] put_cred+0x13/0x15 [<ffffffff81069b45>] commit_creds+0x16b/0x175 [<ffffffff8106aace>] set_current_groups+0x47/0x4e [<ffffffff8106ac89>] sys_setgroups+0xf6/0x105 [<ffffffff81009b02>] system_call_fastpath+0x16/0x1b Code: 48 8d 71 ff e8 7e 4e 15 00 85 c0 78 0b 8b 75 ec 48 89 df e8 ef 4a 15 00 48 83 c4 18 5b c9 c3 55 8b 07 8b 07 48 89 e5 85 c0 74 04 <0f> 0b eb fe 65 48 8b 04 25 00 cc 00 00 48 3b b8 58 04 00 00 75 RIP [<ffffffff81069881>] __put_cred+0xc/0x45 RSP <ffff88019e7e9eb8> ---[ end trace df391256a100ebdd ]--- Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-29 11:45:49 +00:00
cred = get_task_cred(p);
task_lock(p);
if (p->fs)
umask = p->fs->umask;
if (p->files)
max_fds = files_fdtable(p->files)->max_fds;
task_unlock(p);
rcu_read_unlock();
if (umask >= 0)
seq_printf(m, "Umask:\t%#04o\n", umask);
seq_puts(m, "State:\t");
seq_puts(m, get_task_state(p));
proc: faster /proc/*/status top(1) opens the following files for every PID: /proc/*/stat /proc/*/statm /proc/*/status This patch switches /proc/*/status away from seq_printf(). The result is 13.5% speedup. Benchmark is open("/proc/self/status")+read+close 1.000.000 million times. BEFORE $ perf stat -r 10 taskset -c 3 ./proc-self-status Performance counter stats for 'taskset -c 3 ./proc-self-status' (10 runs): 10748.474301 task-clock (msec) # 0.954 CPUs utilized ( +- 0.91% ) 12 context-switches # 0.001 K/sec ( +- 1.09% ) 1 cpu-migrations # 0.000 K/sec 104 page-faults # 0.010 K/sec ( +- 0.45% ) 37,424,127,876 cycles # 3.482 GHz ( +- 0.04% ) 8,453,010,029 stalled-cycles-frontend # 22.59% frontend cycles idle ( +- 0.12% ) 3,747,609,427 stalled-cycles-backend # 10.01% backend cycles idle ( +- 0.68% ) 65,632,764,147 instructions # 1.75 insn per cycle # 0.13 stalled cycles per insn ( +- 0.00% ) 13,981,324,775 branches # 1300.773 M/sec ( +- 0.00% ) 138,967,110 branch-misses # 0.99% of all branches ( +- 0.18% ) 11.263885428 seconds time elapsed ( +- 0.04% ) ^^^^^^^^^^^^ AFTER $ perf stat -r 10 taskset -c 3 ./proc-self-status Performance counter stats for 'taskset -c 3 ./proc-self-status' (10 runs): 9010.521776 task-clock (msec) # 0.925 CPUs utilized ( +- 1.54% ) 11 context-switches # 0.001 K/sec ( +- 1.54% ) 1 cpu-migrations # 0.000 K/sec ( +- 11.11% ) 103 page-faults # 0.011 K/sec ( +- 0.60% ) 32,352,310,603 cycles # 3.591 GHz ( +- 0.07% ) 7,849,199,578 stalled-cycles-frontend # 24.26% frontend cycles idle ( +- 0.27% ) 3,269,738,842 stalled-cycles-backend # 10.11% backend cycles idle ( +- 0.73% ) 56,012,163,567 instructions # 1.73 insn per cycle # 0.14 stalled cycles per insn ( +- 0.00% ) 11,735,778,795 branches # 1302.453 M/sec ( +- 0.00% ) 98,084,459 branch-misses # 0.84% of all branches ( +- 0.28% ) 9.741247736 seconds time elapsed ( +- 0.07% ) ^^^^^^^^^^^ Link: http://lkml.kernel.org/r/20160806125608.GB1187@p183.telecom.by Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 00:02:17 +00:00
seq_put_decimal_ull(m, "\nTgid:\t", tgid);
seq_put_decimal_ull(m, "\nNgid:\t", ngid);
seq_put_decimal_ull(m, "\nPid:\t", pid_nr_ns(pid, ns));
seq_put_decimal_ull(m, "\nPPid:\t", ppid);
seq_put_decimal_ull(m, "\nTracerPid:\t", tpid);
seq_put_decimal_ull(m, "\nUid:\t", from_kuid_munged(user_ns, cred->uid));
seq_put_decimal_ull(m, "\t", from_kuid_munged(user_ns, cred->euid));
seq_put_decimal_ull(m, "\t", from_kuid_munged(user_ns, cred->suid));
seq_put_decimal_ull(m, "\t", from_kuid_munged(user_ns, cred->fsuid));
seq_put_decimal_ull(m, "\nGid:\t", from_kgid_munged(user_ns, cred->gid));
seq_put_decimal_ull(m, "\t", from_kgid_munged(user_ns, cred->egid));
seq_put_decimal_ull(m, "\t", from_kgid_munged(user_ns, cred->sgid));
seq_put_decimal_ull(m, "\t", from_kgid_munged(user_ns, cred->fsgid));
seq_put_decimal_ull(m, "\nFDSize:\t", max_fds);
proc: faster /proc/*/status top(1) opens the following files for every PID: /proc/*/stat /proc/*/statm /proc/*/status This patch switches /proc/*/status away from seq_printf(). The result is 13.5% speedup. Benchmark is open("/proc/self/status")+read+close 1.000.000 million times. BEFORE $ perf stat -r 10 taskset -c 3 ./proc-self-status Performance counter stats for 'taskset -c 3 ./proc-self-status' (10 runs): 10748.474301 task-clock (msec) # 0.954 CPUs utilized ( +- 0.91% ) 12 context-switches # 0.001 K/sec ( +- 1.09% ) 1 cpu-migrations # 0.000 K/sec 104 page-faults # 0.010 K/sec ( +- 0.45% ) 37,424,127,876 cycles # 3.482 GHz ( +- 0.04% ) 8,453,010,029 stalled-cycles-frontend # 22.59% frontend cycles idle ( +- 0.12% ) 3,747,609,427 stalled-cycles-backend # 10.01% backend cycles idle ( +- 0.68% ) 65,632,764,147 instructions # 1.75 insn per cycle # 0.13 stalled cycles per insn ( +- 0.00% ) 13,981,324,775 branches # 1300.773 M/sec ( +- 0.00% ) 138,967,110 branch-misses # 0.99% of all branches ( +- 0.18% ) 11.263885428 seconds time elapsed ( +- 0.04% ) ^^^^^^^^^^^^ AFTER $ perf stat -r 10 taskset -c 3 ./proc-self-status Performance counter stats for 'taskset -c 3 ./proc-self-status' (10 runs): 9010.521776 task-clock (msec) # 0.925 CPUs utilized ( +- 1.54% ) 11 context-switches # 0.001 K/sec ( +- 1.54% ) 1 cpu-migrations # 0.000 K/sec ( +- 11.11% ) 103 page-faults # 0.011 K/sec ( +- 0.60% ) 32,352,310,603 cycles # 3.591 GHz ( +- 0.07% ) 7,849,199,578 stalled-cycles-frontend # 24.26% frontend cycles idle ( +- 0.27% ) 3,269,738,842 stalled-cycles-backend # 10.11% backend cycles idle ( +- 0.73% ) 56,012,163,567 instructions # 1.73 insn per cycle # 0.14 stalled cycles per insn ( +- 0.00% ) 11,735,778,795 branches # 1302.453 M/sec ( +- 0.00% ) 98,084,459 branch-misses # 0.84% of all branches ( +- 0.28% ) 9.741247736 seconds time elapsed ( +- 0.07% ) ^^^^^^^^^^^ Link: http://lkml.kernel.org/r/20160806125608.GB1187@p183.telecom.by Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 00:02:17 +00:00
seq_puts(m, "\nGroups:\t");
group_info = cred->group_info;
for (g = 0; g < group_info->ngroups; g++)
seq_put_decimal_ull(m, g ? " " : "",
cred: simpler, 1D supplementary groups Current supplementary groups code can massively overallocate memory and is implemented in a way so that access to individual gid is done via 2D array. If number of gids is <= 32, memory allocation is more or less tolerable (140/148 bytes). But if it is not, code allocates full page (!) regardless and, what's even more fun, doesn't reuse small 32-entry array. 2D array means dependent shifts, loads and LEAs without possibility to optimize them (gid is never known at compile time). All of the above is unnecessary. Switch to the usual trailing-zero-len-array scheme. Memory is allocated with kmalloc/vmalloc() and only as much as needed. Accesses become simpler (LEA 8(gi,idx,4) or even without displacement). Maximum number of gids is 65536 which translates to 256KB+8 bytes. I think kernel can handle such allocation. On my usual desktop system with whole 9 (nine) aux groups, struct group_info shrinks from 148 bytes to 44 bytes, yay! Nice side effects: - "gi->gid[i]" is shorter than "GROUP_AT(gi, i)", less typing, - fix little mess in net/ipv4/ping.c should have been using GROUP_AT macro but this point becomes moot, - aux group allocation is persistent and should be accounted as such. Link: http://lkml.kernel.org/r/20160817201927.GA2096@p183.telecom.by Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Vasily Kulikov <segoon@openwall.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 00:03:12 +00:00
from_kgid_munged(user_ns, group_info->gid[g]));
put_cred(cred);
proc: faster /proc/*/status top(1) opens the following files for every PID: /proc/*/stat /proc/*/statm /proc/*/status This patch switches /proc/*/status away from seq_printf(). The result is 13.5% speedup. Benchmark is open("/proc/self/status")+read+close 1.000.000 million times. BEFORE $ perf stat -r 10 taskset -c 3 ./proc-self-status Performance counter stats for 'taskset -c 3 ./proc-self-status' (10 runs): 10748.474301 task-clock (msec) # 0.954 CPUs utilized ( +- 0.91% ) 12 context-switches # 0.001 K/sec ( +- 1.09% ) 1 cpu-migrations # 0.000 K/sec 104 page-faults # 0.010 K/sec ( +- 0.45% ) 37,424,127,876 cycles # 3.482 GHz ( +- 0.04% ) 8,453,010,029 stalled-cycles-frontend # 22.59% frontend cycles idle ( +- 0.12% ) 3,747,609,427 stalled-cycles-backend # 10.01% backend cycles idle ( +- 0.68% ) 65,632,764,147 instructions # 1.75 insn per cycle # 0.13 stalled cycles per insn ( +- 0.00% ) 13,981,324,775 branches # 1300.773 M/sec ( +- 0.00% ) 138,967,110 branch-misses # 0.99% of all branches ( +- 0.18% ) 11.263885428 seconds time elapsed ( +- 0.04% ) ^^^^^^^^^^^^ AFTER $ perf stat -r 10 taskset -c 3 ./proc-self-status Performance counter stats for 'taskset -c 3 ./proc-self-status' (10 runs): 9010.521776 task-clock (msec) # 0.925 CPUs utilized ( +- 1.54% ) 11 context-switches # 0.001 K/sec ( +- 1.54% ) 1 cpu-migrations # 0.000 K/sec ( +- 11.11% ) 103 page-faults # 0.011 K/sec ( +- 0.60% ) 32,352,310,603 cycles # 3.591 GHz ( +- 0.07% ) 7,849,199,578 stalled-cycles-frontend # 24.26% frontend cycles idle ( +- 0.27% ) 3,269,738,842 stalled-cycles-backend # 10.11% backend cycles idle ( +- 0.73% ) 56,012,163,567 instructions # 1.73 insn per cycle # 0.14 stalled cycles per insn ( +- 0.00% ) 11,735,778,795 branches # 1302.453 M/sec ( +- 0.00% ) 98,084,459 branch-misses # 0.84% of all branches ( +- 0.28% ) 9.741247736 seconds time elapsed ( +- 0.07% ) ^^^^^^^^^^^ Link: http://lkml.kernel.org/r/20160806125608.GB1187@p183.telecom.by Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 00:02:17 +00:00
/* Trailing space shouldn't have been added in the first place. */
seq_putc(m, ' ');
#ifdef CONFIG_PID_NS
seq_puts(m, "\nNStgid:");
for (g = ns->level; g <= pid->level; g++)
seq_put_decimal_ull(m, "\t", task_tgid_nr_ns(p, pid->numbers[g].ns));
seq_puts(m, "\nNSpid:");
for (g = ns->level; g <= pid->level; g++)
seq_put_decimal_ull(m, "\t", task_pid_nr_ns(p, pid->numbers[g].ns));
seq_puts(m, "\nNSpgid:");
for (g = ns->level; g <= pid->level; g++)
seq_put_decimal_ull(m, "\t", task_pgrp_nr_ns(p, pid->numbers[g].ns));
seq_puts(m, "\nNSsid:");
for (g = ns->level; g <= pid->level; g++)
seq_put_decimal_ull(m, "\t", task_session_nr_ns(p, pid->numbers[g].ns));
#endif
seq_putc(m, '\n');
seq_printf(m, "Kthread:\t%c\n", p->flags & PF_KTHREAD ? '1' : '0');
}
void render_sigset_t(struct seq_file *m, const char *header,
sigset_t *set)
{
int i;
seq_puts(m, header);
i = _NSIG;
do {
int x = 0;
i -= 4;
if (sigismember(set, i+1)) x |= 1;
if (sigismember(set, i+2)) x |= 2;
if (sigismember(set, i+3)) x |= 4;
if (sigismember(set, i+4)) x |= 8;
seq_putc(m, hex_asc[x]);
} while (i >= 4);
seq_putc(m, '\n');
}
static void collect_sigign_sigcatch(struct task_struct *p, sigset_t *sigign,
sigset_t *sigcatch)
{
struct k_sigaction *k;
int i;
k = p->sighand->action;
for (i = 1; i <= _NSIG; ++i, ++k) {
if (k->sa.sa_handler == SIG_IGN)
sigaddset(sigign, i);
else if (k->sa.sa_handler != SIG_DFL)
sigaddset(sigcatch, i);
}
}
static inline void task_sig(struct seq_file *m, struct task_struct *p)
{
unsigned long flags;
sigset_t pending, shpending, blocked, ignored, caught;
int num_threads = 0;
unsigned int qsize = 0;
unsigned long qlim = 0;
sigemptyset(&pending);
sigemptyset(&shpending);
sigemptyset(&blocked);
sigemptyset(&ignored);
sigemptyset(&caught);
if (lock_task_sighand(p, &flags)) {
pending = p->pending.signal;
shpending = p->signal->shared_pending.signal;
blocked = p->blocked;
collect_sigign_sigcatch(p, &ignored, &caught);
num_threads = get_nr_threads(p);
rcu_read_lock(); /* FIXME: is this correct? */
qsize = get_rlimit_value(task_ucounts(p), UCOUNT_RLIMIT_SIGPENDING);
rcu_read_unlock();
qlim = task_rlimit(p, RLIMIT_SIGPENDING);
unlock_task_sighand(p, &flags);
}
seq_put_decimal_ull(m, "Threads:\t", num_threads);
seq_put_decimal_ull(m, "\nSigQ:\t", qsize);
seq_put_decimal_ull(m, "/", qlim);
/* render them all */
proc: faster /proc/*/status top(1) opens the following files for every PID: /proc/*/stat /proc/*/statm /proc/*/status This patch switches /proc/*/status away from seq_printf(). The result is 13.5% speedup. Benchmark is open("/proc/self/status")+read+close 1.000.000 million times. BEFORE $ perf stat -r 10 taskset -c 3 ./proc-self-status Performance counter stats for 'taskset -c 3 ./proc-self-status' (10 runs): 10748.474301 task-clock (msec) # 0.954 CPUs utilized ( +- 0.91% ) 12 context-switches # 0.001 K/sec ( +- 1.09% ) 1 cpu-migrations # 0.000 K/sec 104 page-faults # 0.010 K/sec ( +- 0.45% ) 37,424,127,876 cycles # 3.482 GHz ( +- 0.04% ) 8,453,010,029 stalled-cycles-frontend # 22.59% frontend cycles idle ( +- 0.12% ) 3,747,609,427 stalled-cycles-backend # 10.01% backend cycles idle ( +- 0.68% ) 65,632,764,147 instructions # 1.75 insn per cycle # 0.13 stalled cycles per insn ( +- 0.00% ) 13,981,324,775 branches # 1300.773 M/sec ( +- 0.00% ) 138,967,110 branch-misses # 0.99% of all branches ( +- 0.18% ) 11.263885428 seconds time elapsed ( +- 0.04% ) ^^^^^^^^^^^^ AFTER $ perf stat -r 10 taskset -c 3 ./proc-self-status Performance counter stats for 'taskset -c 3 ./proc-self-status' (10 runs): 9010.521776 task-clock (msec) # 0.925 CPUs utilized ( +- 1.54% ) 11 context-switches # 0.001 K/sec ( +- 1.54% ) 1 cpu-migrations # 0.000 K/sec ( +- 11.11% ) 103 page-faults # 0.011 K/sec ( +- 0.60% ) 32,352,310,603 cycles # 3.591 GHz ( +- 0.07% ) 7,849,199,578 stalled-cycles-frontend # 24.26% frontend cycles idle ( +- 0.27% ) 3,269,738,842 stalled-cycles-backend # 10.11% backend cycles idle ( +- 0.73% ) 56,012,163,567 instructions # 1.73 insn per cycle # 0.14 stalled cycles per insn ( +- 0.00% ) 11,735,778,795 branches # 1302.453 M/sec ( +- 0.00% ) 98,084,459 branch-misses # 0.84% of all branches ( +- 0.28% ) 9.741247736 seconds time elapsed ( +- 0.07% ) ^^^^^^^^^^^ Link: http://lkml.kernel.org/r/20160806125608.GB1187@p183.telecom.by Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 00:02:17 +00:00
render_sigset_t(m, "\nSigPnd:\t", &pending);
render_sigset_t(m, "ShdPnd:\t", &shpending);
render_sigset_t(m, "SigBlk:\t", &blocked);
render_sigset_t(m, "SigIgn:\t", &ignored);
render_sigset_t(m, "SigCgt:\t", &caught);
}
static void render_cap_t(struct seq_file *m, const char *header,
kernel_cap_t *a)
{
seq_puts(m, header);
capability: just use a 'u64' instead of a 'u32[2]' array Back in 2008 we extended the capability bits from 32 to 64, and we did it by extending the single 32-bit capability word from one word to an array of two words. It was then obfuscated by hiding the "2" behind two macro expansions, with the reasoning being that maybe it gets extended further some day. That reasoning may have been valid at the time, but the last thing we want to do is to extend the capability set any more. And the array of values not only causes source code oddities (with loops to deal with it), but also results in worse code generation. It's a lose-lose situation. So just change the 'u32[2]' into a 'u64' and be done with it. We still have to deal with the fact that the user space interface is designed around an array of these 32-bit values, but that was the case before too, since the array layouts were different (ie user space doesn't use an array of 32-bit values for individual capability masks, but an array of 32-bit slices of multiple masks). So that marshalling of data is actually simplified too, even if it does remain somewhat obscure and odd. This was all triggered by my reaction to the new "cap_isidentical()" introduced recently. By just using a saner data structure, it went from unsigned __capi; CAP_FOR_EACH_U32(__capi) { if (a.cap[__capi] != b.cap[__capi]) return false; } return true; to just being return a.val == b.val; instead. Which is rather more obvious both to humans and to compilers. Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Paul Moore <paul@paul-moore.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-02-28 19:39:09 +00:00
seq_put_hex_ll(m, NULL, a->val, 16);
seq_putc(m, '\n');
}
static inline void task_cap(struct seq_file *m, struct task_struct *p)
{
const struct cred *cred;
capabilities: ambient capabilities Credit where credit is due: this idea comes from Christoph Lameter with a lot of valuable input from Serge Hallyn. This patch is heavily based on Christoph's patch. ===== The status quo ===== On Linux, there are a number of capabilities defined by the kernel. To perform various privileged tasks, processes can wield capabilities that they hold. Each task has four capability masks: effective (pE), permitted (pP), inheritable (pI), and a bounding set (X). When the kernel checks for a capability, it checks pE. The other capability masks serve to modify what capabilities can be in pE. Any task can remove capabilities from pE, pP, or pI at any time. If a task has a capability in pP, it can add that capability to pE and/or pI. If a task has CAP_SETPCAP, then it can add any capability to pI, and it can remove capabilities from X. Tasks are not the only things that can have capabilities; files can also have capabilities. A file can have no capabilty information at all [1]. If a file has capability information, then it has a permitted mask (fP) and an inheritable mask (fI) as well as a single effective bit (fE) [2]. File capabilities modify the capabilities of tasks that execve(2) them. A task that successfully calls execve has its capabilities modified for the file ultimately being excecuted (i.e. the binary itself if that binary is ELF or for the interpreter if the binary is a script.) [3] In the capability evolution rules, for each mask Z, pZ represents the old value and pZ' represents the new value. The rules are: pP' = (X & fP) | (pI & fI) pI' = pI pE' = (fE ? pP' : 0) X is unchanged For setuid binaries, fP, fI, and fE are modified by a moderately complicated set of rules that emulate POSIX behavior. Similarly, if euid == 0 or ruid == 0, then fP, fI, and fE are modified differently (primary, fP and fI usually end up being the full set). For nonroot users executing binaries with neither setuid nor file caps, fI and fP are empty and fE is false. As an extra complication, if you execute a process as nonroot and fE is set, then the "secure exec" rules are in effect: AT_SECURE gets set, LD_PRELOAD doesn't work, etc. This is rather messy. We've learned that making any changes is dangerous, though: if a new kernel version allows an unprivileged program to change its security state in a way that persists cross execution of a setuid program or a program with file caps, this persistent state is surprisingly likely to allow setuid or file-capped programs to be exploited for privilege escalation. ===== The problem ===== Capability inheritance is basically useless. If you aren't root and you execute an ordinary binary, fI is zero, so your capabilities have no effect whatsoever on pP'. This means that you can't usefully execute a helper process or a shell command with elevated capabilities if you aren't root. On current kernels, you can sort of work around this by setting fI to the full set for most or all non-setuid executable files. This causes pP' = pI for nonroot, and inheritance works. No one does this because it's a PITA and it isn't even supported on most filesystems. If you try this, you'll discover that every nonroot program ends up with secure exec rules, breaking many things. This is a problem that has bitten many people who have tried to use capabilities for anything useful. ===== The proposed change ===== This patch adds a fifth capability mask called the ambient mask (pA). pA does what most people expect pI to do. pA obeys the invariant that no bit can ever be set in pA if it is not set in both pP and pI. Dropping a bit from pP or pI drops that bit from pA. This ensures that existing programs that try to drop capabilities still do so, with a complication. Because capability inheritance is so broken, setting KEEPCAPS, using setresuid to switch to nonroot uids, and then calling execve effectively drops capabilities. Therefore, setresuid from root to nonroot conditionally clears pA unless SECBIT_NO_SETUID_FIXUP is set. Processes that don't like this can re-add bits to pA afterwards. The capability evolution rules are changed: pA' = (file caps or setuid or setgid ? 0 : pA) pP' = (X & fP) | (pI & fI) | pA' pI' = pI pE' = (fE ? pP' : pA') X is unchanged If you are nonroot but you have a capability, you can add it to pA. If you do so, your children get that capability in pA, pP, and pE. For example, you can set pA = CAP_NET_BIND_SERVICE, and your children can automatically bind low-numbered ports. Hallelujah! Unprivileged users can create user namespaces, map themselves to a nonzero uid, and create both privileged (relative to their namespace) and unprivileged process trees. This is currently more or less impossible. Hallelujah! You cannot use pA to try to subvert a setuid, setgid, or file-capped program: if you execute any such program, pA gets cleared and the resulting evolution rules are unchanged by this patch. Users with nonzero pA are unlikely to unintentionally leak that capability. If they run programs that try to drop privileges, dropping privileges will still work. It's worth noting that the degree of paranoia in this patch could possibly be reduced without causing serious problems. Specifically, if we allowed pA to persist across executing non-pA-aware setuid binaries and across setresuid, then, naively, the only capabilities that could leak as a result would be the capabilities in pA, and any attacker *already* has those capabilities. This would make me nervous, though -- setuid binaries that tried to privilege-separate might fail to do so, and putting CAP_DAC_READ_SEARCH or CAP_DAC_OVERRIDE into pA could have unexpected side effects. (Whether these unexpected side effects would be exploitable is an open question.) I've therefore taken the more paranoid route. We can revisit this later. An alternative would be to require PR_SET_NO_NEW_PRIVS before setting ambient capabilities. I think that this would be annoying and would make granting otherwise unprivileged users minor ambient capabilities (CAP_NET_BIND_SERVICE or CAP_NET_RAW for example) much less useful than it is with this patch. ===== Footnotes ===== [1] Files that are missing the "security.capability" xattr or that have unrecognized values for that xattr end up with has_cap set to false. The code that does that appears to be complicated for no good reason. [2] The libcap capability mask parsers and formatters are dangerously misleading and the documentation is flat-out wrong. fE is *not* a mask; it's a single bit. This has probably confused every single person who has tried to use file capabilities. [3] Linux very confusingly processes both the script and the interpreter if applicable, for reasons that elude me. The results from thinking about a script's file capabilities and/or setuid bits are mostly discarded. Preliminary userspace code is here, but it needs updating: https://git.kernel.org/cgit/linux/kernel/git/luto/util-linux-playground.git/commit/?h=cap_ambient&id=7f5afbd175d2 Here is a test program that can be used to verify the functionality (from Christoph): /* * Test program for the ambient capabilities. This program spawns a shell * that allows running processes with a defined set of capabilities. * * (C) 2015 Christoph Lameter <cl@linux.com> * Released under: GPL v3 or later. * * * Compile using: * * gcc -o ambient_test ambient_test.o -lcap-ng * * This program must have the following capabilities to run properly: * Permissions for CAP_NET_RAW, CAP_NET_ADMIN, CAP_SYS_NICE * * A command to equip the binary with the right caps is: * * setcap cap_net_raw,cap_net_admin,cap_sys_nice+p ambient_test * * * To get a shell with additional caps that can be inherited by other processes: * * ./ambient_test /bin/bash * * * Verifying that it works: * * From the bash spawed by ambient_test run * * cat /proc/$$/status * * and have a look at the capabilities. */ #include <stdlib.h> #include <stdio.h> #include <errno.h> #include <cap-ng.h> #include <sys/prctl.h> #include <linux/capability.h> /* * Definitions from the kernel header files. These are going to be removed * when the /usr/include files have these defined. */ #define PR_CAP_AMBIENT 47 #define PR_CAP_AMBIENT_IS_SET 1 #define PR_CAP_AMBIENT_RAISE 2 #define PR_CAP_AMBIENT_LOWER 3 #define PR_CAP_AMBIENT_CLEAR_ALL 4 static void set_ambient_cap(int cap) { int rc; capng_get_caps_process(); rc = capng_update(CAPNG_ADD, CAPNG_INHERITABLE, cap); if (rc) { printf("Cannot add inheritable cap\n"); exit(2); } capng_apply(CAPNG_SELECT_CAPS); /* Note the two 0s at the end. Kernel checks for these */ if (prctl(PR_CAP_AMBIENT, PR_CAP_AMBIENT_RAISE, cap, 0, 0)) { perror("Cannot set cap"); exit(1); } } int main(int argc, char **argv) { int rc; set_ambient_cap(CAP_NET_RAW); set_ambient_cap(CAP_NET_ADMIN); set_ambient_cap(CAP_SYS_NICE); printf("Ambient_test forking shell\n"); if (execv(argv[1], argv + 1)) perror("Cannot exec"); return 0; } Signed-off-by: Christoph Lameter <cl@linux.com> # Original author Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Aaron Jones <aaronmdjones@gmail.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Andrew G. Morgan <morgan@kernel.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: Markku Savela <msa@moth.iki.fi> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: James Morris <james.l.morris@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:42:45 +00:00
kernel_cap_t cap_inheritable, cap_permitted, cap_effective,
cap_bset, cap_ambient;
rcu_read_lock();
cred = __task_cred(p);
cap_inheritable = cred->cap_inheritable;
cap_permitted = cred->cap_permitted;
cap_effective = cred->cap_effective;
cap_bset = cred->cap_bset;
capabilities: ambient capabilities Credit where credit is due: this idea comes from Christoph Lameter with a lot of valuable input from Serge Hallyn. This patch is heavily based on Christoph's patch. ===== The status quo ===== On Linux, there are a number of capabilities defined by the kernel. To perform various privileged tasks, processes can wield capabilities that they hold. Each task has four capability masks: effective (pE), permitted (pP), inheritable (pI), and a bounding set (X). When the kernel checks for a capability, it checks pE. The other capability masks serve to modify what capabilities can be in pE. Any task can remove capabilities from pE, pP, or pI at any time. If a task has a capability in pP, it can add that capability to pE and/or pI. If a task has CAP_SETPCAP, then it can add any capability to pI, and it can remove capabilities from X. Tasks are not the only things that can have capabilities; files can also have capabilities. A file can have no capabilty information at all [1]. If a file has capability information, then it has a permitted mask (fP) and an inheritable mask (fI) as well as a single effective bit (fE) [2]. File capabilities modify the capabilities of tasks that execve(2) them. A task that successfully calls execve has its capabilities modified for the file ultimately being excecuted (i.e. the binary itself if that binary is ELF or for the interpreter if the binary is a script.) [3] In the capability evolution rules, for each mask Z, pZ represents the old value and pZ' represents the new value. The rules are: pP' = (X & fP) | (pI & fI) pI' = pI pE' = (fE ? pP' : 0) X is unchanged For setuid binaries, fP, fI, and fE are modified by a moderately complicated set of rules that emulate POSIX behavior. Similarly, if euid == 0 or ruid == 0, then fP, fI, and fE are modified differently (primary, fP and fI usually end up being the full set). For nonroot users executing binaries with neither setuid nor file caps, fI and fP are empty and fE is false. As an extra complication, if you execute a process as nonroot and fE is set, then the "secure exec" rules are in effect: AT_SECURE gets set, LD_PRELOAD doesn't work, etc. This is rather messy. We've learned that making any changes is dangerous, though: if a new kernel version allows an unprivileged program to change its security state in a way that persists cross execution of a setuid program or a program with file caps, this persistent state is surprisingly likely to allow setuid or file-capped programs to be exploited for privilege escalation. ===== The problem ===== Capability inheritance is basically useless. If you aren't root and you execute an ordinary binary, fI is zero, so your capabilities have no effect whatsoever on pP'. This means that you can't usefully execute a helper process or a shell command with elevated capabilities if you aren't root. On current kernels, you can sort of work around this by setting fI to the full set for most or all non-setuid executable files. This causes pP' = pI for nonroot, and inheritance works. No one does this because it's a PITA and it isn't even supported on most filesystems. If you try this, you'll discover that every nonroot program ends up with secure exec rules, breaking many things. This is a problem that has bitten many people who have tried to use capabilities for anything useful. ===== The proposed change ===== This patch adds a fifth capability mask called the ambient mask (pA). pA does what most people expect pI to do. pA obeys the invariant that no bit can ever be set in pA if it is not set in both pP and pI. Dropping a bit from pP or pI drops that bit from pA. This ensures that existing programs that try to drop capabilities still do so, with a complication. Because capability inheritance is so broken, setting KEEPCAPS, using setresuid to switch to nonroot uids, and then calling execve effectively drops capabilities. Therefore, setresuid from root to nonroot conditionally clears pA unless SECBIT_NO_SETUID_FIXUP is set. Processes that don't like this can re-add bits to pA afterwards. The capability evolution rules are changed: pA' = (file caps or setuid or setgid ? 0 : pA) pP' = (X & fP) | (pI & fI) | pA' pI' = pI pE' = (fE ? pP' : pA') X is unchanged If you are nonroot but you have a capability, you can add it to pA. If you do so, your children get that capability in pA, pP, and pE. For example, you can set pA = CAP_NET_BIND_SERVICE, and your children can automatically bind low-numbered ports. Hallelujah! Unprivileged users can create user namespaces, map themselves to a nonzero uid, and create both privileged (relative to their namespace) and unprivileged process trees. This is currently more or less impossible. Hallelujah! You cannot use pA to try to subvert a setuid, setgid, or file-capped program: if you execute any such program, pA gets cleared and the resulting evolution rules are unchanged by this patch. Users with nonzero pA are unlikely to unintentionally leak that capability. If they run programs that try to drop privileges, dropping privileges will still work. It's worth noting that the degree of paranoia in this patch could possibly be reduced without causing serious problems. Specifically, if we allowed pA to persist across executing non-pA-aware setuid binaries and across setresuid, then, naively, the only capabilities that could leak as a result would be the capabilities in pA, and any attacker *already* has those capabilities. This would make me nervous, though -- setuid binaries that tried to privilege-separate might fail to do so, and putting CAP_DAC_READ_SEARCH or CAP_DAC_OVERRIDE into pA could have unexpected side effects. (Whether these unexpected side effects would be exploitable is an open question.) I've therefore taken the more paranoid route. We can revisit this later. An alternative would be to require PR_SET_NO_NEW_PRIVS before setting ambient capabilities. I think that this would be annoying and would make granting otherwise unprivileged users minor ambient capabilities (CAP_NET_BIND_SERVICE or CAP_NET_RAW for example) much less useful than it is with this patch. ===== Footnotes ===== [1] Files that are missing the "security.capability" xattr or that have unrecognized values for that xattr end up with has_cap set to false. The code that does that appears to be complicated for no good reason. [2] The libcap capability mask parsers and formatters are dangerously misleading and the documentation is flat-out wrong. fE is *not* a mask; it's a single bit. This has probably confused every single person who has tried to use file capabilities. [3] Linux very confusingly processes both the script and the interpreter if applicable, for reasons that elude me. The results from thinking about a script's file capabilities and/or setuid bits are mostly discarded. Preliminary userspace code is here, but it needs updating: https://git.kernel.org/cgit/linux/kernel/git/luto/util-linux-playground.git/commit/?h=cap_ambient&id=7f5afbd175d2 Here is a test program that can be used to verify the functionality (from Christoph): /* * Test program for the ambient capabilities. This program spawns a shell * that allows running processes with a defined set of capabilities. * * (C) 2015 Christoph Lameter <cl@linux.com> * Released under: GPL v3 or later. * * * Compile using: * * gcc -o ambient_test ambient_test.o -lcap-ng * * This program must have the following capabilities to run properly: * Permissions for CAP_NET_RAW, CAP_NET_ADMIN, CAP_SYS_NICE * * A command to equip the binary with the right caps is: * * setcap cap_net_raw,cap_net_admin,cap_sys_nice+p ambient_test * * * To get a shell with additional caps that can be inherited by other processes: * * ./ambient_test /bin/bash * * * Verifying that it works: * * From the bash spawed by ambient_test run * * cat /proc/$$/status * * and have a look at the capabilities. */ #include <stdlib.h> #include <stdio.h> #include <errno.h> #include <cap-ng.h> #include <sys/prctl.h> #include <linux/capability.h> /* * Definitions from the kernel header files. These are going to be removed * when the /usr/include files have these defined. */ #define PR_CAP_AMBIENT 47 #define PR_CAP_AMBIENT_IS_SET 1 #define PR_CAP_AMBIENT_RAISE 2 #define PR_CAP_AMBIENT_LOWER 3 #define PR_CAP_AMBIENT_CLEAR_ALL 4 static void set_ambient_cap(int cap) { int rc; capng_get_caps_process(); rc = capng_update(CAPNG_ADD, CAPNG_INHERITABLE, cap); if (rc) { printf("Cannot add inheritable cap\n"); exit(2); } capng_apply(CAPNG_SELECT_CAPS); /* Note the two 0s at the end. Kernel checks for these */ if (prctl(PR_CAP_AMBIENT, PR_CAP_AMBIENT_RAISE, cap, 0, 0)) { perror("Cannot set cap"); exit(1); } } int main(int argc, char **argv) { int rc; set_ambient_cap(CAP_NET_RAW); set_ambient_cap(CAP_NET_ADMIN); set_ambient_cap(CAP_SYS_NICE); printf("Ambient_test forking shell\n"); if (execv(argv[1], argv + 1)) perror("Cannot exec"); return 0; } Signed-off-by: Christoph Lameter <cl@linux.com> # Original author Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Aaron Jones <aaronmdjones@gmail.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Andrew G. Morgan <morgan@kernel.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: Markku Savela <msa@moth.iki.fi> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: James Morris <james.l.morris@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:42:45 +00:00
cap_ambient = cred->cap_ambient;
rcu_read_unlock();
render_cap_t(m, "CapInh:\t", &cap_inheritable);
render_cap_t(m, "CapPrm:\t", &cap_permitted);
render_cap_t(m, "CapEff:\t", &cap_effective);
render_cap_t(m, "CapBnd:\t", &cap_bset);
capabilities: ambient capabilities Credit where credit is due: this idea comes from Christoph Lameter with a lot of valuable input from Serge Hallyn. This patch is heavily based on Christoph's patch. ===== The status quo ===== On Linux, there are a number of capabilities defined by the kernel. To perform various privileged tasks, processes can wield capabilities that they hold. Each task has four capability masks: effective (pE), permitted (pP), inheritable (pI), and a bounding set (X). When the kernel checks for a capability, it checks pE. The other capability masks serve to modify what capabilities can be in pE. Any task can remove capabilities from pE, pP, or pI at any time. If a task has a capability in pP, it can add that capability to pE and/or pI. If a task has CAP_SETPCAP, then it can add any capability to pI, and it can remove capabilities from X. Tasks are not the only things that can have capabilities; files can also have capabilities. A file can have no capabilty information at all [1]. If a file has capability information, then it has a permitted mask (fP) and an inheritable mask (fI) as well as a single effective bit (fE) [2]. File capabilities modify the capabilities of tasks that execve(2) them. A task that successfully calls execve has its capabilities modified for the file ultimately being excecuted (i.e. the binary itself if that binary is ELF or for the interpreter if the binary is a script.) [3] In the capability evolution rules, for each mask Z, pZ represents the old value and pZ' represents the new value. The rules are: pP' = (X & fP) | (pI & fI) pI' = pI pE' = (fE ? pP' : 0) X is unchanged For setuid binaries, fP, fI, and fE are modified by a moderately complicated set of rules that emulate POSIX behavior. Similarly, if euid == 0 or ruid == 0, then fP, fI, and fE are modified differently (primary, fP and fI usually end up being the full set). For nonroot users executing binaries with neither setuid nor file caps, fI and fP are empty and fE is false. As an extra complication, if you execute a process as nonroot and fE is set, then the "secure exec" rules are in effect: AT_SECURE gets set, LD_PRELOAD doesn't work, etc. This is rather messy. We've learned that making any changes is dangerous, though: if a new kernel version allows an unprivileged program to change its security state in a way that persists cross execution of a setuid program or a program with file caps, this persistent state is surprisingly likely to allow setuid or file-capped programs to be exploited for privilege escalation. ===== The problem ===== Capability inheritance is basically useless. If you aren't root and you execute an ordinary binary, fI is zero, so your capabilities have no effect whatsoever on pP'. This means that you can't usefully execute a helper process or a shell command with elevated capabilities if you aren't root. On current kernels, you can sort of work around this by setting fI to the full set for most or all non-setuid executable files. This causes pP' = pI for nonroot, and inheritance works. No one does this because it's a PITA and it isn't even supported on most filesystems. If you try this, you'll discover that every nonroot program ends up with secure exec rules, breaking many things. This is a problem that has bitten many people who have tried to use capabilities for anything useful. ===== The proposed change ===== This patch adds a fifth capability mask called the ambient mask (pA). pA does what most people expect pI to do. pA obeys the invariant that no bit can ever be set in pA if it is not set in both pP and pI. Dropping a bit from pP or pI drops that bit from pA. This ensures that existing programs that try to drop capabilities still do so, with a complication. Because capability inheritance is so broken, setting KEEPCAPS, using setresuid to switch to nonroot uids, and then calling execve effectively drops capabilities. Therefore, setresuid from root to nonroot conditionally clears pA unless SECBIT_NO_SETUID_FIXUP is set. Processes that don't like this can re-add bits to pA afterwards. The capability evolution rules are changed: pA' = (file caps or setuid or setgid ? 0 : pA) pP' = (X & fP) | (pI & fI) | pA' pI' = pI pE' = (fE ? pP' : pA') X is unchanged If you are nonroot but you have a capability, you can add it to pA. If you do so, your children get that capability in pA, pP, and pE. For example, you can set pA = CAP_NET_BIND_SERVICE, and your children can automatically bind low-numbered ports. Hallelujah! Unprivileged users can create user namespaces, map themselves to a nonzero uid, and create both privileged (relative to their namespace) and unprivileged process trees. This is currently more or less impossible. Hallelujah! You cannot use pA to try to subvert a setuid, setgid, or file-capped program: if you execute any such program, pA gets cleared and the resulting evolution rules are unchanged by this patch. Users with nonzero pA are unlikely to unintentionally leak that capability. If they run programs that try to drop privileges, dropping privileges will still work. It's worth noting that the degree of paranoia in this patch could possibly be reduced without causing serious problems. Specifically, if we allowed pA to persist across executing non-pA-aware setuid binaries and across setresuid, then, naively, the only capabilities that could leak as a result would be the capabilities in pA, and any attacker *already* has those capabilities. This would make me nervous, though -- setuid binaries that tried to privilege-separate might fail to do so, and putting CAP_DAC_READ_SEARCH or CAP_DAC_OVERRIDE into pA could have unexpected side effects. (Whether these unexpected side effects would be exploitable is an open question.) I've therefore taken the more paranoid route. We can revisit this later. An alternative would be to require PR_SET_NO_NEW_PRIVS before setting ambient capabilities. I think that this would be annoying and would make granting otherwise unprivileged users minor ambient capabilities (CAP_NET_BIND_SERVICE or CAP_NET_RAW for example) much less useful than it is with this patch. ===== Footnotes ===== [1] Files that are missing the "security.capability" xattr or that have unrecognized values for that xattr end up with has_cap set to false. The code that does that appears to be complicated for no good reason. [2] The libcap capability mask parsers and formatters are dangerously misleading and the documentation is flat-out wrong. fE is *not* a mask; it's a single bit. This has probably confused every single person who has tried to use file capabilities. [3] Linux very confusingly processes both the script and the interpreter if applicable, for reasons that elude me. The results from thinking about a script's file capabilities and/or setuid bits are mostly discarded. Preliminary userspace code is here, but it needs updating: https://git.kernel.org/cgit/linux/kernel/git/luto/util-linux-playground.git/commit/?h=cap_ambient&id=7f5afbd175d2 Here is a test program that can be used to verify the functionality (from Christoph): /* * Test program for the ambient capabilities. This program spawns a shell * that allows running processes with a defined set of capabilities. * * (C) 2015 Christoph Lameter <cl@linux.com> * Released under: GPL v3 or later. * * * Compile using: * * gcc -o ambient_test ambient_test.o -lcap-ng * * This program must have the following capabilities to run properly: * Permissions for CAP_NET_RAW, CAP_NET_ADMIN, CAP_SYS_NICE * * A command to equip the binary with the right caps is: * * setcap cap_net_raw,cap_net_admin,cap_sys_nice+p ambient_test * * * To get a shell with additional caps that can be inherited by other processes: * * ./ambient_test /bin/bash * * * Verifying that it works: * * From the bash spawed by ambient_test run * * cat /proc/$$/status * * and have a look at the capabilities. */ #include <stdlib.h> #include <stdio.h> #include <errno.h> #include <cap-ng.h> #include <sys/prctl.h> #include <linux/capability.h> /* * Definitions from the kernel header files. These are going to be removed * when the /usr/include files have these defined. */ #define PR_CAP_AMBIENT 47 #define PR_CAP_AMBIENT_IS_SET 1 #define PR_CAP_AMBIENT_RAISE 2 #define PR_CAP_AMBIENT_LOWER 3 #define PR_CAP_AMBIENT_CLEAR_ALL 4 static void set_ambient_cap(int cap) { int rc; capng_get_caps_process(); rc = capng_update(CAPNG_ADD, CAPNG_INHERITABLE, cap); if (rc) { printf("Cannot add inheritable cap\n"); exit(2); } capng_apply(CAPNG_SELECT_CAPS); /* Note the two 0s at the end. Kernel checks for these */ if (prctl(PR_CAP_AMBIENT, PR_CAP_AMBIENT_RAISE, cap, 0, 0)) { perror("Cannot set cap"); exit(1); } } int main(int argc, char **argv) { int rc; set_ambient_cap(CAP_NET_RAW); set_ambient_cap(CAP_NET_ADMIN); set_ambient_cap(CAP_SYS_NICE); printf("Ambient_test forking shell\n"); if (execv(argv[1], argv + 1)) perror("Cannot exec"); return 0; } Signed-off-by: Christoph Lameter <cl@linux.com> # Original author Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Aaron Jones <aaronmdjones@gmail.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Andrew G. Morgan <morgan@kernel.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: Markku Savela <msa@moth.iki.fi> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: James Morris <james.l.morris@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:42:45 +00:00
render_cap_t(m, "CapAmb:\t", &cap_ambient);
}
static inline void task_seccomp(struct seq_file *m, struct task_struct *p)
{
seq_put_decimal_ull(m, "NoNewPrivs:\t", task_no_new_privs(p));
#ifdef CONFIG_SECCOMP
seq_put_decimal_ull(m, "\nSeccomp:\t", p->seccomp.mode);
#ifdef CONFIG_SECCOMP_FILTER
seq_put_decimal_ull(m, "\nSeccomp_filters:\t",
atomic_read(&p->seccomp.filter_count));
#endif
#endif
seq_puts(m, "\nSpeculation_Store_Bypass:\t");
switch (arch_prctl_spec_ctrl_get(p, PR_SPEC_STORE_BYPASS)) {
case -EINVAL:
seq_puts(m, "unknown");
break;
case PR_SPEC_NOT_AFFECTED:
seq_puts(m, "not vulnerable");
break;
case PR_SPEC_PRCTL | PR_SPEC_FORCE_DISABLE:
seq_puts(m, "thread force mitigated");
break;
case PR_SPEC_PRCTL | PR_SPEC_DISABLE:
seq_puts(m, "thread mitigated");
break;
case PR_SPEC_PRCTL | PR_SPEC_ENABLE:
seq_puts(m, "thread vulnerable");
break;
case PR_SPEC_DISABLE:
seq_puts(m, "globally mitigated");
break;
default:
seq_puts(m, "vulnerable");
break;
}
proc: provide details on indirect branch speculation Similar to speculation store bypass, show information about the indirect branch speculation mode of a task in /proc/$pid/status. For testing/benchmarking, I needed to see whether IB (Indirect Branch) speculation (see Spectre-v2) is enabled on a task, to see whether an IBPB instruction should be executed on an address space switch. Unfortunately, this information isn't available anywhere else and currently the only way to get it is to hack the kernel to expose it (like this change). It also helped expose a bug with conditional IB speculation on certain CPUs. Another place this could be useful is to audit the system when using sanboxing. With this change, I can confirm that seccomp-enabled process have IB speculation force disabled as expected when the kernel command line parameter `spectre_v2_user=seccomp`. Since there's already a 'Speculation_Store_Bypass' field, I used that as precedent for adding this one. [amistry@google.com: remove underscores from field name to workaround documentation issue] Link: https://lkml.kernel.org/r/20201106131015.v2.1.I7782b0cedb705384a634cfd8898eb7523562da99@changeid Link: https://lkml.kernel.org/r/20201030172731.1.I7782b0cedb705384a634cfd8898eb7523562da99@changeid Signed-off-by: Anand K Mistry <amistry@google.com> Cc: Anthony Steinhauser <asteinhauser@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Anand K Mistry <amistry@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-16 04:42:36 +00:00
seq_puts(m, "\nSpeculationIndirectBranch:\t");
switch (arch_prctl_spec_ctrl_get(p, PR_SPEC_INDIRECT_BRANCH)) {
case -EINVAL:
seq_puts(m, "unsupported");
break;
case PR_SPEC_NOT_AFFECTED:
seq_puts(m, "not affected");
break;
case PR_SPEC_PRCTL | PR_SPEC_FORCE_DISABLE:
seq_puts(m, "conditional force disabled");
break;
case PR_SPEC_PRCTL | PR_SPEC_DISABLE:
seq_puts(m, "conditional disabled");
break;
case PR_SPEC_PRCTL | PR_SPEC_ENABLE:
seq_puts(m, "conditional enabled");
break;
case PR_SPEC_ENABLE:
seq_puts(m, "always enabled");
break;
case PR_SPEC_DISABLE:
seq_puts(m, "always disabled");
break;
default:
seq_puts(m, "unknown");
break;
}
seq_putc(m, '\n');
}
static inline void task_context_switch_counts(struct seq_file *m,
struct task_struct *p)
{
seq_put_decimal_ull(m, "voluntary_ctxt_switches:\t", p->nvcsw);
seq_put_decimal_ull(m, "\nnonvoluntary_ctxt_switches:\t", p->nivcsw);
proc: faster /proc/*/status top(1) opens the following files for every PID: /proc/*/stat /proc/*/statm /proc/*/status This patch switches /proc/*/status away from seq_printf(). The result is 13.5% speedup. Benchmark is open("/proc/self/status")+read+close 1.000.000 million times. BEFORE $ perf stat -r 10 taskset -c 3 ./proc-self-status Performance counter stats for 'taskset -c 3 ./proc-self-status' (10 runs): 10748.474301 task-clock (msec) # 0.954 CPUs utilized ( +- 0.91% ) 12 context-switches # 0.001 K/sec ( +- 1.09% ) 1 cpu-migrations # 0.000 K/sec 104 page-faults # 0.010 K/sec ( +- 0.45% ) 37,424,127,876 cycles # 3.482 GHz ( +- 0.04% ) 8,453,010,029 stalled-cycles-frontend # 22.59% frontend cycles idle ( +- 0.12% ) 3,747,609,427 stalled-cycles-backend # 10.01% backend cycles idle ( +- 0.68% ) 65,632,764,147 instructions # 1.75 insn per cycle # 0.13 stalled cycles per insn ( +- 0.00% ) 13,981,324,775 branches # 1300.773 M/sec ( +- 0.00% ) 138,967,110 branch-misses # 0.99% of all branches ( +- 0.18% ) 11.263885428 seconds time elapsed ( +- 0.04% ) ^^^^^^^^^^^^ AFTER $ perf stat -r 10 taskset -c 3 ./proc-self-status Performance counter stats for 'taskset -c 3 ./proc-self-status' (10 runs): 9010.521776 task-clock (msec) # 0.925 CPUs utilized ( +- 1.54% ) 11 context-switches # 0.001 K/sec ( +- 1.54% ) 1 cpu-migrations # 0.000 K/sec ( +- 11.11% ) 103 page-faults # 0.011 K/sec ( +- 0.60% ) 32,352,310,603 cycles # 3.591 GHz ( +- 0.07% ) 7,849,199,578 stalled-cycles-frontend # 24.26% frontend cycles idle ( +- 0.27% ) 3,269,738,842 stalled-cycles-backend # 10.11% backend cycles idle ( +- 0.73% ) 56,012,163,567 instructions # 1.73 insn per cycle # 0.14 stalled cycles per insn ( +- 0.00% ) 11,735,778,795 branches # 1302.453 M/sec ( +- 0.00% ) 98,084,459 branch-misses # 0.84% of all branches ( +- 0.28% ) 9.741247736 seconds time elapsed ( +- 0.07% ) ^^^^^^^^^^^ Link: http://lkml.kernel.org/r/20160806125608.GB1187@p183.telecom.by Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 00:02:17 +00:00
seq_putc(m, '\n');
}
static void task_cpus_allowed(struct seq_file *m, struct task_struct *task)
{
seq_printf(m, "Cpus_allowed:\t%*pb\n",
cpumask_pr_args(&task->cpus_mask));
seq_printf(m, "Cpus_allowed_list:\t%*pbl\n",
cpumask_pr_args(&task->cpus_mask));
}
coredump: Limit coredumps to a single thread group Today when a signal is delivered with a handler of SIG_DFL whose default behavior is to generate a core dump not only that process but every process that shares the mm is killed. In the case of vfork this looks like a real world problem. Consider the following well defined sequence. if (vfork() == 0) { execve(...); _exit(EXIT_FAILURE); } If a signal that generates a core dump is received after vfork but before the execve changes the mm the process that called vfork will also be killed (as the mm is shared). Similarly if the execve fails after the point of no return the kernel delivers SIGSEGV which will kill both the exec'ing process and because the mm is shared the process that called vfork as well. As far as I can tell this behavior is a violation of people's reasonable expectations, POSIX, and is unnecessarily fragile when the system is low on memory. Solve this by making a userspace visible change to only kill a single process/thread group. This is possible because Jann Horn recently modified[1] the coredump code so that the mm can safely be modified while the coredump is happening. With LinuxThreads long gone I don't expect anyone to have a notice this behavior change in practice. To accomplish this move the core_state pointer from mm_struct to signal_struct, which allows different thread groups to coredump simultatenously. In zap_threads remove the work to kill anything except for the current thread group. v2: Remove core_state from the VM_BUG_ON_MM print to fix compile failure when CONFIG_DEBUG_VM is enabled. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [1] a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot") Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3") History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Link: https://lkml.kernel.org/r/87y27mvnke.fsf@disp2133 Link: https://lkml.kernel.org/r/20211007144701.67592574@canb.auug.org.au Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-09-22 16:24:02 +00:00
static inline void task_core_dumping(struct seq_file *m, struct task_struct *task)
proc, coredump: add CoreDumping flag to /proc/pid/status Right now there is no convenient way to check if a process is being coredumped at the moment. It might be necessary to recognize such state to prevent killing the process and getting a broken coredump. Writing a large core might take significant time, and the process is unresponsive during it, so it might be killed by timeout, if another process is monitoring and killing/restarting hanging tasks. We're getting a significant number of corrupted coredump files on machines in our fleet, just because processes are being killed by timeout in the middle of the core writing process. We do have a process health check, and some agent is responsible for restarting processes which are not responding for health check requests. Writing a large coredump to the disk can easily exceed the reasonable timeout (especially on an overloaded machine). This flag will allow the agent to distinguish processes which are being coredumped, extend the timeout for them, and let them produce a full coredump file. To provide an ability to detect if a process is in the state of being coredumped, we can expose a boolean CoreDumping flag in /proc/pid/status. Example: $ cat core.sh #!/bin/sh echo "|/usr/bin/sleep 10" > /proc/sys/kernel/core_pattern sleep 1000 & PID=$! cat /proc/$PID/status | grep CoreDumping kill -ABRT $PID sleep 1 cat /proc/$PID/status | grep CoreDumping $ ./core.sh CoreDumping: 0 CoreDumping: 1 [guro@fb.com: document CoreDumping flag in /proc/<pid>/status] Link: http://lkml.kernel.org/r/20170928135357.GA8470@castle.DHCP.thefacebook.com Link: http://lkml.kernel.org/r/20170920230634.31572-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 23:26:45 +00:00
{
coredump: Limit coredumps to a single thread group Today when a signal is delivered with a handler of SIG_DFL whose default behavior is to generate a core dump not only that process but every process that shares the mm is killed. In the case of vfork this looks like a real world problem. Consider the following well defined sequence. if (vfork() == 0) { execve(...); _exit(EXIT_FAILURE); } If a signal that generates a core dump is received after vfork but before the execve changes the mm the process that called vfork will also be killed (as the mm is shared). Similarly if the execve fails after the point of no return the kernel delivers SIGSEGV which will kill both the exec'ing process and because the mm is shared the process that called vfork as well. As far as I can tell this behavior is a violation of people's reasonable expectations, POSIX, and is unnecessarily fragile when the system is low on memory. Solve this by making a userspace visible change to only kill a single process/thread group. This is possible because Jann Horn recently modified[1] the coredump code so that the mm can safely be modified while the coredump is happening. With LinuxThreads long gone I don't expect anyone to have a notice this behavior change in practice. To accomplish this move the core_state pointer from mm_struct to signal_struct, which allows different thread groups to coredump simultatenously. In zap_threads remove the work to kill anything except for the current thread group. v2: Remove core_state from the VM_BUG_ON_MM print to fix compile failure when CONFIG_DEBUG_VM is enabled. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [1] a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot") Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3") History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Link: https://lkml.kernel.org/r/87y27mvnke.fsf@disp2133 Link: https://lkml.kernel.org/r/20211007144701.67592574@canb.auug.org.au Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-09-22 16:24:02 +00:00
seq_put_decimal_ull(m, "CoreDumping:\t", !!task->signal->core_state);
seq_putc(m, '\n');
proc, coredump: add CoreDumping flag to /proc/pid/status Right now there is no convenient way to check if a process is being coredumped at the moment. It might be necessary to recognize such state to prevent killing the process and getting a broken coredump. Writing a large core might take significant time, and the process is unresponsive during it, so it might be killed by timeout, if another process is monitoring and killing/restarting hanging tasks. We're getting a significant number of corrupted coredump files on machines in our fleet, just because processes are being killed by timeout in the middle of the core writing process. We do have a process health check, and some agent is responsible for restarting processes which are not responding for health check requests. Writing a large coredump to the disk can easily exceed the reasonable timeout (especially on an overloaded machine). This flag will allow the agent to distinguish processes which are being coredumped, extend the timeout for them, and let them produce a full coredump file. To provide an ability to detect if a process is in the state of being coredumped, we can expose a boolean CoreDumping flag in /proc/pid/status. Example: $ cat core.sh #!/bin/sh echo "|/usr/bin/sleep 10" > /proc/sys/kernel/core_pattern sleep 1000 & PID=$! cat /proc/$PID/status | grep CoreDumping kill -ABRT $PID sleep 1 cat /proc/$PID/status | grep CoreDumping $ ./core.sh CoreDumping: 0 CoreDumping: 1 [guro@fb.com: document CoreDumping flag in /proc/<pid>/status] Link: http://lkml.kernel.org/r/20170928135357.GA8470@castle.DHCP.thefacebook.com Link: http://lkml.kernel.org/r/20170920230634.31572-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 23:26:45 +00:00
}
mm, proc: report PR_SET_THP_DISABLE in proc David Rientjes has reported that commit 1860033237d4 ("mm: make PR_SET_THP_DISABLE immediately active") has changed the way how we report THPable VMAs to the userspace. Their monitoring tool is triggering false alarms on PR_SET_THP_DISABLE tasks because it considers an insufficient THP usage as a memory fragmentation resp. memory pressure issue. Before the said commit each newly created VMA inherited VM_NOHUGEPAGE flag and that got exposed to the userspace via /proc/<pid>/smaps file. This implementation had its downsides as explained in the commit message but it is true that the userspace doesn't have any means to query for the process wide THP enabled/disabled status. PR_SET_THP_DISABLE is a process wide flag so it makes a lot of sense to export in the process wide context rather than per-vma. Introduce a new field to /proc/<pid>/status which export this status. If PR_SET_THP_DISABLE is used then it reports false same as when the THP is not compiled in. It doesn't consider the global THP status because we already export that information via sysfs Link: http://lkml.kernel.org/r/20181211143641.3503-4-mhocko@kernel.org Fixes: 1860033237d4 ("mm: make PR_SET_THP_DISABLE immediately active") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Paul Oppenheimer <bepvte@gmail.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 08:38:25 +00:00
static inline void task_thp_status(struct seq_file *m, struct mm_struct *mm)
{
bool thp_enabled = IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE);
if (thp_enabled)
thp_enabled = !test_bit(MMF_DISABLE_THP, &mm->flags);
seq_printf(m, "THP_enabled:\t%d\n", thp_enabled);
}
static inline void task_untag_mask(struct seq_file *m, struct mm_struct *mm)
{
seq_printf(m, "untag_mask:\t%#lx\n", mm_untag_mask(mm));
}
__weak void arch_proc_pid_thread_features(struct seq_file *m,
struct task_struct *task)
{
}
int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
{
struct mm_struct *mm = get_task_mm(task);
seq_puts(m, "Name:\t");
proc_task_name(m, task, true);
seq_putc(m, '\n');
task_state(m, ns, pid, task);
if (mm) {
task_mem(m, mm);
coredump: Limit coredumps to a single thread group Today when a signal is delivered with a handler of SIG_DFL whose default behavior is to generate a core dump not only that process but every process that shares the mm is killed. In the case of vfork this looks like a real world problem. Consider the following well defined sequence. if (vfork() == 0) { execve(...); _exit(EXIT_FAILURE); } If a signal that generates a core dump is received after vfork but before the execve changes the mm the process that called vfork will also be killed (as the mm is shared). Similarly if the execve fails after the point of no return the kernel delivers SIGSEGV which will kill both the exec'ing process and because the mm is shared the process that called vfork as well. As far as I can tell this behavior is a violation of people's reasonable expectations, POSIX, and is unnecessarily fragile when the system is low on memory. Solve this by making a userspace visible change to only kill a single process/thread group. This is possible because Jann Horn recently modified[1] the coredump code so that the mm can safely be modified while the coredump is happening. With LinuxThreads long gone I don't expect anyone to have a notice this behavior change in practice. To accomplish this move the core_state pointer from mm_struct to signal_struct, which allows different thread groups to coredump simultatenously. In zap_threads remove the work to kill anything except for the current thread group. v2: Remove core_state from the VM_BUG_ON_MM print to fix compile failure when CONFIG_DEBUG_VM is enabled. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [1] a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot") Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3") History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Link: https://lkml.kernel.org/r/87y27mvnke.fsf@disp2133 Link: https://lkml.kernel.org/r/20211007144701.67592574@canb.auug.org.au Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-09-22 16:24:02 +00:00
task_core_dumping(m, task);
mm, proc: report PR_SET_THP_DISABLE in proc David Rientjes has reported that commit 1860033237d4 ("mm: make PR_SET_THP_DISABLE immediately active") has changed the way how we report THPable VMAs to the userspace. Their monitoring tool is triggering false alarms on PR_SET_THP_DISABLE tasks because it considers an insufficient THP usage as a memory fragmentation resp. memory pressure issue. Before the said commit each newly created VMA inherited VM_NOHUGEPAGE flag and that got exposed to the userspace via /proc/<pid>/smaps file. This implementation had its downsides as explained in the commit message but it is true that the userspace doesn't have any means to query for the process wide THP enabled/disabled status. PR_SET_THP_DISABLE is a process wide flag so it makes a lot of sense to export in the process wide context rather than per-vma. Introduce a new field to /proc/<pid>/status which export this status. If PR_SET_THP_DISABLE is used then it reports false same as when the THP is not compiled in. It doesn't consider the global THP status because we already export that information via sysfs Link: http://lkml.kernel.org/r/20181211143641.3503-4-mhocko@kernel.org Fixes: 1860033237d4 ("mm: make PR_SET_THP_DISABLE immediately active") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Paul Oppenheimer <bepvte@gmail.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 08:38:25 +00:00
task_thp_status(m, mm);
task_untag_mask(m, mm);
mmput(mm);
}
task_sig(m, task);
task_cap(m, task);
task_seccomp(m, task);
task_cpus_allowed(m, task);
cpuset_task_status_allowed(m, task);
task_context_switch_counts(m, task);
arch_proc_pid_thread_features(m, task);
return 0;
}
static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task, int whole)
{
fs/proc, core/debug: Don't expose absolute kernel addresses via wchan So the /proc/PID/stat 'wchan' field (the 30th field, which contains the absolute kernel address of the kernel function a task is blocked in) leaks absolute kernel addresses to unprivileged user-space: seq_put_decimal_ull(m, ' ', wchan); The absolute address might also leak via /proc/PID/wchan as well, if KALLSYMS is turned off or if the symbol lookup fails for some reason: static int proc_pid_wchan(struct seq_file *m, struct pid_namespace *ns, struct pid *pid, struct task_struct *task) { unsigned long wchan; char symname[KSYM_NAME_LEN]; wchan = get_wchan(task); if (lookup_symbol_name(wchan, symname) < 0) { if (!ptrace_may_access(task, PTRACE_MODE_READ)) return 0; seq_printf(m, "%lu", wchan); } else { seq_printf(m, "%s", symname); } return 0; } This isn't ideal, because for example it trivially leaks the KASLR offset to any local attacker: fomalhaut:~> printf "%016lx\n" $(cat /proc/$$/stat | cut -d' ' -f35) ffffffff8123b380 Most real-life uses of wchan are symbolic: ps -eo pid:10,tid:10,wchan:30,comm and procps uses /proc/PID/wchan, not the absolute address in /proc/PID/stat: triton:~/tip> strace -f ps -eo pid:10,tid:10,wchan:30,comm 2>&1 | grep wchan | tail -1 open("/proc/30833/wchan", O_RDONLY) = 6 There's one compatibility quirk here: procps relies on whether the absolute value is non-zero - and we can provide that functionality by outputing "0" or "1" depending on whether the task is blocked (whether there's a wchan address). These days there appears to be very little legitimate reason user-space would be interested in the absolute address. The absolute address is mostly historic: from the days when we didn't have kallsyms and user-space procps had to do the decoding itself via the System.map. So this patch sets all numeric output to "0" or "1" and keeps only symbolic output, in /proc/PID/wchan. ( The absolute sleep address can generally still be profiled via perf, by tasks with sufficient privileges. ) Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: kasan-dev <kasan-dev@googlegroups.com> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20150930135917.GA3285@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-30 13:59:17 +00:00
unsigned long vsize, eip, esp, wchan = 0;
int priority, nice;
int tty_pgrp = -1, tty_nr = 0;
sigset_t sigign, sigcatch;
char state;
pid_t ppid = 0, pgid = -1, sid = -1;
int num_threads = 0;
int permitted;
struct mm_struct *mm;
unsigned long long start_time;
unsigned long cmin_flt, cmaj_flt, min_flt, maj_flt;
u64 cutime, cstime, cgtime, utime, stime, gtime;
unsigned long rsslim = 0;
unsigned long flags;
int exit_code = task->exit_code;
struct signal_struct *sig = task->signal;
unsigned int seq = 1;
state = *get_task_state(task);
vsize = eip = esp = 0;
ptrace: use fsuid, fsgid, effective creds for fs access checks By checking the effective credentials instead of the real UID / permitted capabilities, ensure that the calling process actually intended to use its credentials. To ensure that all ptrace checks use the correct caller credentials (e.g. in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS flag), use two new flags and require one of them to be set. The problem was that when a privileged task had temporarily dropped its privileges, e.g. by calling setreuid(0, user_uid), with the intent to perform following syscalls with the credentials of a user, it still passed ptrace access checks that the user would not be able to pass. While an attacker should not be able to convince the privileged task to perform a ptrace() syscall, this is a problem because the ptrace access check is reused for things in procfs. In particular, the following somewhat interesting procfs entries only rely on ptrace access checks: /proc/$pid/stat - uses the check for determining whether pointers should be visible, useful for bypassing ASLR /proc/$pid/maps - also useful for bypassing ASLR /proc/$pid/cwd - useful for gaining access to restricted directories that contain files with lax permissions, e.g. in this scenario: lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar drwx------ root root /root drwxr-xr-x root root /root/foobar -rw-r--r-- root root /root/foobar/secret Therefore, on a system where a root-owned mode 6755 binary changes its effective credentials as described and then dumps a user-specified file, this could be used by an attacker to reveal the memory layout of root's processes or reveal the contents of files he is not allowed to access (through /proc/$pid/cwd). [akpm@linux-foundation.org: fix warning] Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 23:00:04 +00:00
permitted = ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS | PTRACE_MODE_NOAUDIT);
mm = get_task_mm(task);
if (mm) {
vsize = task_vsize(mm);
/*
* esp and eip are intentionally zeroed out. There is no
* non-racy way to read them without freezing the task.
* Programs that need reliable values can use ptrace(2).
fs/proc: Report eip/esp in /prod/PID/stat for coredumping Commit 0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in /proc/PID/stat") stopped reporting eip/esp because it is racy and dangerous for executing tasks. The comment adds: As far as I know, there are no use programs that make any material use of these fields, so just get rid of them. However, existing userspace core-dump-handler applications (for example, minicoredumper) are using these fields since they provide an excellent cross-platform interface to these valuable pointers. So that commit introduced a user space visible regression. Partially revert the change and make the readout possible for tasks with the proper permissions and only if the target task has the PF_DUMPCORE flag set. Fixes: 0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in> /proc/PID/stat") Reported-by: Marco Felsch <marco.felsch@preh.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: Tycho Andersen <tycho.andersen@canonical.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: stable@vger.kernel.org Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Borislav Petkov <bp@alien8.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linux API <linux-api@vger.kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/87poatfwg6.fsf@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-09-14 09:42:17 +00:00
*
* The only exception is if the task is core dumping because
* a program is not able to use ptrace(2) in that case. It is
* safe because the task has stopped executing permanently.
*/
if (permitted && (task->flags & (PF_EXITING|PF_DUMPCORE))) {
proc: fix coredump vs read /proc/*/stat race do_task_stat() accesses IP and SP of a task without bumping reference count of a stack (which became an entity with independent lifetime at some point). Steps to reproduce: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <sys/time.h> #include <sys/resource.h> #include <unistd.h> #include <sys/wait.h> int main(void) { setrlimit(RLIMIT_CORE, &(struct rlimit){}); while (1) { char buf[64]; char buf2[4096]; pid_t pid; int fd; pid = fork(); if (pid == 0) { *(volatile int *)0 = 0; } snprintf(buf, sizeof(buf), "/proc/%u/stat", pid); fd = open(buf, O_RDONLY); read(fd, buf2, sizeof(buf2)); close(fd); waitpid(pid, NULL, 0); } return 0; } BUG: unable to handle kernel paging request at 0000000000003fd8 IP: do_task_stat+0x8b4/0xaf0 PGD 800000003d73e067 P4D 800000003d73e067 PUD 3d558067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1417 Comm: a.out Not tainted 4.15.0-rc8-dirty #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014 RIP: 0010:do_task_stat+0x8b4/0xaf0 Call Trace: proc_single_show+0x43/0x70 seq_read+0xe6/0x3b0 __vfs_read+0x1e/0x120 vfs_read+0x84/0x110 SyS_read+0x3d/0xa0 entry_SYSCALL_64_fastpath+0x13/0x6c RIP: 0033:0x7f4d7928cba0 RSP: 002b:00007ffddb245158 EFLAGS: 00000246 Code: 03 b7 a0 01 00 00 4c 8b 4c 24 70 4c 8b 44 24 78 4c 89 74 24 18 e9 91 f9 ff ff f6 45 4d 02 0f 84 fd f7 ff ff 48 8b 45 40 48 89 ef <48> 8b 80 d8 3f 00 00 48 89 44 24 20 e8 9b 97 eb ff 48 89 44 24 RIP: do_task_stat+0x8b4/0xaf0 RSP: ffffc90000607cc8 CR2: 0000000000003fd8 John Ogness said: for my tests I added an else case to verify that the race is hit and correctly mitigated. Link: http://lkml.kernel.org/r/20180116175054.GA11513@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: "Kohli, Gaurav" <gkohli@codeaurora.org> Tested-by: John Ogness <john.ogness@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-19 00:34:05 +00:00
if (try_get_task_stack(task)) {
eip = KSTK_EIP(task);
esp = KSTK_ESP(task);
put_task_stack(task);
}
fs/proc: Report eip/esp in /prod/PID/stat for coredumping Commit 0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in /proc/PID/stat") stopped reporting eip/esp because it is racy and dangerous for executing tasks. The comment adds: As far as I know, there are no use programs that make any material use of these fields, so just get rid of them. However, existing userspace core-dump-handler applications (for example, minicoredumper) are using these fields since they provide an excellent cross-platform interface to these valuable pointers. So that commit introduced a user space visible regression. Partially revert the change and make the readout possible for tasks with the proper permissions and only if the target task has the PF_DUMPCORE flag set. Fixes: 0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in> /proc/PID/stat") Reported-by: Marco Felsch <marco.felsch@preh.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: Tycho Andersen <tycho.andersen@canonical.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: stable@vger.kernel.org Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Borislav Petkov <bp@alien8.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linux API <linux-api@vger.kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/87poatfwg6.fsf@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-09-14 09:42:17 +00:00
}
}
sigemptyset(&sigign);
sigemptyset(&sigcatch);
if (lock_task_sighand(task, &flags)) {
if (sig->tty) {
struct pid *pgrp = tty_get_pgrp(sig->tty);
tty_pgrp = pid_nr_ns(pgrp, ns);
put_pid(pgrp);
tty_nr = new_encode_dev(tty_devnum(sig->tty));
}
num_threads = get_nr_threads(task);
collect_sigign_sigcatch(task, &sigign, &sigcatch);
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 21:07:29 +00:00
rsslim = READ_ONCE(sig->rlim[RLIMIT_RSS].rlim_cur);
if (whole) {
if (sig->flags & (SIGNAL_GROUP_EXIT | SIGNAL_STOP_STOPPED))
exit_code = sig->group_exit_code;
}
sid = task_session_nr_ns(task, ns);
ppid = task_tgid_nr_ns(task->real_parent, ns);
pgid = task_pgrp_nr_ns(task, ns);
unlock_task_sighand(task, &flags);
}
if (permitted && (!whole || num_threads < 2))
wchan = !task_is_running(task);
do {
seq++; /* 2 on the 1st/lockless path, otherwise odd */
flags = read_seqbegin_or_lock_irqsave(&sig->stats_lock, &seq);
cmin_flt = sig->cmin_flt;
cmaj_flt = sig->cmaj_flt;
cutime = sig->cutime;
cstime = sig->cstime;
cgtime = sig->cgtime;
if (whole) {
struct task_struct *t;
min_flt = sig->min_flt;
maj_flt = sig->maj_flt;
gtime = sig->gtime;
rcu_read_lock();
__for_each_thread(sig, t) {
min_flt += t->min_flt;
maj_flt += t->maj_flt;
gtime += task_gtime(t);
}
rcu_read_unlock();
}
} while (need_seqretry(&sig->stats_lock, seq));
done_seqretry_irqrestore(&sig->stats_lock, seq, flags);
if (whole) {
thread_group_cputime_adjusted(task, &utime, &stime);
} else {
task_cputime_adjusted(task, &utime, &stime);
min_flt = task->min_flt;
maj_flt = task->maj_flt;
gtime = task_gtime(task);
}
/* scale priority and nice values from timeslices to -20..20 */
/* to make it look like a "normal" Unix priority/nice value */
priority = task_prio(task);
nice = task_nice(task);
/* apply timens offset for boottime and convert nsec -> ticks */
start_time =
nsec_to_clock_t(timens_add_boottime_ns(task->start_boottime));
seq_put_decimal_ull(m, "", pid_nr_ns(pid, ns));
seq_puts(m, " (");
proc_task_name(m, task, false);
seq_puts(m, ") ");
seq_putc(m, state);
seq_put_decimal_ll(m, " ", ppid);
seq_put_decimal_ll(m, " ", pgid);
seq_put_decimal_ll(m, " ", sid);
seq_put_decimal_ll(m, " ", tty_nr);
seq_put_decimal_ll(m, " ", tty_pgrp);
seq_put_decimal_ull(m, " ", task->flags);
seq_put_decimal_ull(m, " ", min_flt);
seq_put_decimal_ull(m, " ", cmin_flt);
seq_put_decimal_ull(m, " ", maj_flt);
seq_put_decimal_ull(m, " ", cmaj_flt);
seq_put_decimal_ull(m, " ", nsec_to_clock_t(utime));
seq_put_decimal_ull(m, " ", nsec_to_clock_t(stime));
seq_put_decimal_ll(m, " ", nsec_to_clock_t(cutime));
seq_put_decimal_ll(m, " ", nsec_to_clock_t(cstime));
seq_put_decimal_ll(m, " ", priority);
seq_put_decimal_ll(m, " ", nice);
seq_put_decimal_ll(m, " ", num_threads);
seq_put_decimal_ull(m, " ", 0);
seq_put_decimal_ull(m, " ", start_time);
seq_put_decimal_ull(m, " ", vsize);
seq_put_decimal_ull(m, " ", mm ? get_mm_rss(mm) : 0);
seq_put_decimal_ull(m, " ", rsslim);
seq_put_decimal_ull(m, " ", mm ? (permitted ? mm->start_code : 1) : 0);
seq_put_decimal_ull(m, " ", mm ? (permitted ? mm->end_code : 1) : 0);
seq_put_decimal_ull(m, " ", (permitted && mm) ? mm->start_stack : 0);
seq_put_decimal_ull(m, " ", esp);
seq_put_decimal_ull(m, " ", eip);
/* The signal information here is obsolete.
* It must be decimal for Linux 2.0 compatibility.
* Use /proc/#/status for real-time signals.
*/
seq_put_decimal_ull(m, " ", task->pending.signal.sig[0] & 0x7fffffffUL);
seq_put_decimal_ull(m, " ", task->blocked.sig[0] & 0x7fffffffUL);
seq_put_decimal_ull(m, " ", sigign.sig[0] & 0x7fffffffUL);
seq_put_decimal_ull(m, " ", sigcatch.sig[0] & 0x7fffffffUL);
fs/proc, core/debug: Don't expose absolute kernel addresses via wchan So the /proc/PID/stat 'wchan' field (the 30th field, which contains the absolute kernel address of the kernel function a task is blocked in) leaks absolute kernel addresses to unprivileged user-space: seq_put_decimal_ull(m, ' ', wchan); The absolute address might also leak via /proc/PID/wchan as well, if KALLSYMS is turned off or if the symbol lookup fails for some reason: static int proc_pid_wchan(struct seq_file *m, struct pid_namespace *ns, struct pid *pid, struct task_struct *task) { unsigned long wchan; char symname[KSYM_NAME_LEN]; wchan = get_wchan(task); if (lookup_symbol_name(wchan, symname) < 0) { if (!ptrace_may_access(task, PTRACE_MODE_READ)) return 0; seq_printf(m, "%lu", wchan); } else { seq_printf(m, "%s", symname); } return 0; } This isn't ideal, because for example it trivially leaks the KASLR offset to any local attacker: fomalhaut:~> printf "%016lx\n" $(cat /proc/$$/stat | cut -d' ' -f35) ffffffff8123b380 Most real-life uses of wchan are symbolic: ps -eo pid:10,tid:10,wchan:30,comm and procps uses /proc/PID/wchan, not the absolute address in /proc/PID/stat: triton:~/tip> strace -f ps -eo pid:10,tid:10,wchan:30,comm 2>&1 | grep wchan | tail -1 open("/proc/30833/wchan", O_RDONLY) = 6 There's one compatibility quirk here: procps relies on whether the absolute value is non-zero - and we can provide that functionality by outputing "0" or "1" depending on whether the task is blocked (whether there's a wchan address). These days there appears to be very little legitimate reason user-space would be interested in the absolute address. The absolute address is mostly historic: from the days when we didn't have kallsyms and user-space procps had to do the decoding itself via the System.map. So this patch sets all numeric output to "0" or "1" and keeps only symbolic output, in /proc/PID/wchan. ( The absolute sleep address can generally still be profiled via perf, by tasks with sufficient privileges. ) Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: kasan-dev <kasan-dev@googlegroups.com> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20150930135917.GA3285@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-30 13:59:17 +00:00
/*
* We used to output the absolute kernel address, but that's an
* information leak - so instead we show a 0/1 flag here, to signal
* to user-space whether there's a wchan field in /proc/PID/wchan.
*
* This works with older implementations of procps as well.
*/
seq_put_decimal_ull(m, " ", wchan);
fs/proc, core/debug: Don't expose absolute kernel addresses via wchan So the /proc/PID/stat 'wchan' field (the 30th field, which contains the absolute kernel address of the kernel function a task is blocked in) leaks absolute kernel addresses to unprivileged user-space: seq_put_decimal_ull(m, ' ', wchan); The absolute address might also leak via /proc/PID/wchan as well, if KALLSYMS is turned off or if the symbol lookup fails for some reason: static int proc_pid_wchan(struct seq_file *m, struct pid_namespace *ns, struct pid *pid, struct task_struct *task) { unsigned long wchan; char symname[KSYM_NAME_LEN]; wchan = get_wchan(task); if (lookup_symbol_name(wchan, symname) < 0) { if (!ptrace_may_access(task, PTRACE_MODE_READ)) return 0; seq_printf(m, "%lu", wchan); } else { seq_printf(m, "%s", symname); } return 0; } This isn't ideal, because for example it trivially leaks the KASLR offset to any local attacker: fomalhaut:~> printf "%016lx\n" $(cat /proc/$$/stat | cut -d' ' -f35) ffffffff8123b380 Most real-life uses of wchan are symbolic: ps -eo pid:10,tid:10,wchan:30,comm and procps uses /proc/PID/wchan, not the absolute address in /proc/PID/stat: triton:~/tip> strace -f ps -eo pid:10,tid:10,wchan:30,comm 2>&1 | grep wchan | tail -1 open("/proc/30833/wchan", O_RDONLY) = 6 There's one compatibility quirk here: procps relies on whether the absolute value is non-zero - and we can provide that functionality by outputing "0" or "1" depending on whether the task is blocked (whether there's a wchan address). These days there appears to be very little legitimate reason user-space would be interested in the absolute address. The absolute address is mostly historic: from the days when we didn't have kallsyms and user-space procps had to do the decoding itself via the System.map. So this patch sets all numeric output to "0" or "1" and keeps only symbolic output, in /proc/PID/wchan. ( The absolute sleep address can generally still be profiled via perf, by tasks with sufficient privileges. ) Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: kasan-dev <kasan-dev@googlegroups.com> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20150930135917.GA3285@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-30 13:59:17 +00:00
seq_put_decimal_ull(m, " ", 0);
seq_put_decimal_ull(m, " ", 0);
seq_put_decimal_ll(m, " ", task->exit_signal);
seq_put_decimal_ll(m, " ", task_cpu(task));
seq_put_decimal_ull(m, " ", task->rt_priority);
seq_put_decimal_ull(m, " ", task->policy);
seq_put_decimal_ull(m, " ", delayacct_blkio_ticks(task));
seq_put_decimal_ull(m, " ", nsec_to_clock_t(gtime));
seq_put_decimal_ll(m, " ", nsec_to_clock_t(cgtime));
if (mm && permitted) {
seq_put_decimal_ull(m, " ", mm->start_data);
seq_put_decimal_ull(m, " ", mm->end_data);
seq_put_decimal_ull(m, " ", mm->start_brk);
seq_put_decimal_ull(m, " ", mm->arg_start);
seq_put_decimal_ull(m, " ", mm->arg_end);
seq_put_decimal_ull(m, " ", mm->env_start);
seq_put_decimal_ull(m, " ", mm->env_end);
} else
seq_puts(m, " 0 0 0 0 0 0 0");
if (permitted)
seq_put_decimal_ll(m, " ", exit_code);
else
seq_puts(m, " 0");
seq_putc(m, '\n');
if (mm)
mmput(mm);
return 0;
}
int proc_tid_stat(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
{
return do_task_stat(m, ns, pid, task, 0);
}
int proc_tgid_stat(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
{
return do_task_stat(m, ns, pid, task, 1);
}
int proc_pid_statm(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
{
struct mm_struct *mm = get_task_mm(task);
if (mm) {
unsigned long size;
unsigned long resident = 0;
unsigned long shared = 0;
unsigned long text = 0;
unsigned long data = 0;
size = task_statm(mm, &shared, &text, &data, &resident);
mmput(mm);
/*
* For quick read, open code by putting numbers directly
* expected format is
* seq_printf(m, "%lu %lu %lu %lu 0 %lu 0\n",
* size, resident, shared, text, data);
*/
seq_put_decimal_ull(m, "", size);
seq_put_decimal_ull(m, " ", resident);
seq_put_decimal_ull(m, " ", shared);
seq_put_decimal_ull(m, " ", text);
seq_put_decimal_ull(m, " ", 0);
seq_put_decimal_ull(m, " ", data);
seq_put_decimal_ull(m, " ", 0);
seq_putc(m, '\n');
} else {
seq_write(m, "0 0 0 0 0 0 0\n", 14);
}
return 0;
}
fs, proc: introduce CONFIG_PROC_CHILDREN Commit 818411616baf ("fs, proc: introduce /proc/<pid>/task/<tid>/children entry") introduced the children entry for checkpoint restore and the file is only available on kernels configured with CONFIG_EXPERT and CONFIG_CHECKPOINT_RESTORE. This is available in most distributions (Fedora, Debian, Ubuntu, CoreOS) because they usually enable CONFIG_EXPERT and CONFIG_CHECKPOINT_RESTORE. But Arch does not enable CONFIG_EXPERT or CONFIG_CHECKPOINT_RESTORE. However, the children proc file is useful outside of checkpoint restore. I would like to use it in rkt. The rkt process exec() another program it does not control, and that other program will fork()+exec() a child process. I would like to find the pid of the child process from an external tool without iterating in /proc over all processes to find which one has a parent pid equal to rkt. This commit introduces CONFIG_PROC_CHILDREN and makes CONFIG_CHECKPOINT_RESTORE select it. This allows enabling /proc/<pid>/task/<tid>/children without needing to enable CONFIG_CHECKPOINT_RESTORE and CONFIG_EXPERT. Alban tested that /proc/<pid>/task/<tid>/children is present when the kernel is configured with CONFIG_PROC_CHILDREN=y but without CONFIG_CHECKPOINT_RESTORE Signed-off-by: Iago López Galeiras <iago@endocode.com> Tested-by: Alban Crequy <alban@endocode.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Djalal Harouni <djalal@endocode.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:00:57 +00:00
#ifdef CONFIG_PROC_CHILDREN
static struct pid *
get_children_pid(struct inode *inode, struct pid *pid_prev, loff_t pos)
{
struct task_struct *start, *task;
struct pid *pid = NULL;
read_lock(&tasklist_lock);
start = pid_task(proc_pid(inode), PIDTYPE_PID);
if (!start)
goto out;
/*
* Lets try to continue searching first, this gives
* us significant speedup on children-rich processes.
*/
if (pid_prev) {
task = pid_task(pid_prev, PIDTYPE_PID);
if (task && task->real_parent == start &&
!(list_empty(&task->sibling))) {
if (list_is_last(&task->sibling, &start->children))
goto out;
task = list_first_entry(&task->sibling,
struct task_struct, sibling);
pid = get_pid(task_pid(task));
goto out;
}
}
/*
* Slow search case.
*
* We might miss some children here if children
* are exited while we were not holding the lock,
* but it was never promised to be accurate that
* much.
*
* "Just suppose that the parent sleeps, but N children
* exit after we printed their tids. Now the slow paths
* skips N extra children, we miss N tasks." (c)
*
* So one need to stop or freeze the leader and all
* its children to get a precise result.
*/
list_for_each_entry(task, &start->children, sibling) {
if (pos-- == 0) {
pid = get_pid(task_pid(task));
break;
}
}
out:
read_unlock(&tasklist_lock);
return pid;
}
static int children_seq_show(struct seq_file *seq, void *v)
{
struct inode *inode = file_inode(seq->file);
seq_printf(seq, "%d ", pid_nr_ns(v, proc_pid_ns(inode->i_sb)));
return 0;
}
static void *children_seq_start(struct seq_file *seq, loff_t *pos)
{
return get_children_pid(file_inode(seq->file), NULL, *pos);
}
static void *children_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct pid *pid;
pid = get_children_pid(file_inode(seq->file), v, *pos + 1);
put_pid(v);
++*pos;
return pid;
}
static void children_seq_stop(struct seq_file *seq, void *v)
{
put_pid(v);
}
static const struct seq_operations children_seq_ops = {
.start = children_seq_start,
.next = children_seq_next,
.stop = children_seq_stop,
.show = children_seq_show,
};
static int children_seq_open(struct inode *inode, struct file *file)
{
return seq_open(file, &children_seq_ops);
}
const struct file_operations proc_tid_children_operations = {
.open = children_seq_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
fs, proc: introduce CONFIG_PROC_CHILDREN Commit 818411616baf ("fs, proc: introduce /proc/<pid>/task/<tid>/children entry") introduced the children entry for checkpoint restore and the file is only available on kernels configured with CONFIG_EXPERT and CONFIG_CHECKPOINT_RESTORE. This is available in most distributions (Fedora, Debian, Ubuntu, CoreOS) because they usually enable CONFIG_EXPERT and CONFIG_CHECKPOINT_RESTORE. But Arch does not enable CONFIG_EXPERT or CONFIG_CHECKPOINT_RESTORE. However, the children proc file is useful outside of checkpoint restore. I would like to use it in rkt. The rkt process exec() another program it does not control, and that other program will fork()+exec() a child process. I would like to find the pid of the child process from an external tool without iterating in /proc over all processes to find which one has a parent pid equal to rkt. This commit introduces CONFIG_PROC_CHILDREN and makes CONFIG_CHECKPOINT_RESTORE select it. This allows enabling /proc/<pid>/task/<tid>/children without needing to enable CONFIG_CHECKPOINT_RESTORE and CONFIG_EXPERT. Alban tested that /proc/<pid>/task/<tid>/children is present when the kernel is configured with CONFIG_PROC_CHILDREN=y but without CONFIG_CHECKPOINT_RESTORE Signed-off-by: Iago López Galeiras <iago@endocode.com> Tested-by: Alban Crequy <alban@endocode.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Djalal Harouni <djalal@endocode.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 22:00:57 +00:00
#endif /* CONFIG_PROC_CHILDREN */