linux/fs/ext4/ext4_jbd2.h

517 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* ext4_jbd2.h
*
* Written by Stephen C. Tweedie <sct@redhat.com>, 1999
*
* Copyright 1998--1999 Red Hat corp --- All Rights Reserved
*
* Ext4-specific journaling extensions.
*/
#ifndef _EXT4_JBD2_H
#define _EXT4_JBD2_H
#include <linux/fs.h>
#include <linux/jbd2.h>
#include "ext4.h"
#define EXT4_JOURNAL(inode) (EXT4_SB((inode)->i_sb)->s_journal)
/* Define the number of blocks we need to account to a transaction to
* modify one block of data.
*
* We may have to touch one inode, one bitmap buffer, up to three
* indirection blocks, the group and superblock summaries, and the data
* block to complete the transaction.
*
* For extents-enabled fs we may have to allocate and modify up to
* 5 levels of tree, data block (for each of these we need bitmap + group
* summaries), root which is stored in the inode, sb
*/
#define EXT4_SINGLEDATA_TRANS_BLOCKS(sb) \
(ext4_has_feature_extents(sb) ? 20U : 8U)
/* Extended attribute operations touch at most two data buffers,
* two bitmap buffers, and two group summaries, in addition to the inode
* and the superblock, which are already accounted for. */
#define EXT4_XATTR_TRANS_BLOCKS 6U
/* Define the minimum size for a transaction which modifies data. This
* needs to take into account the fact that we may end up modifying two
* quota files too (one for the group, one for the user quota). The
* superblock only gets updated once, of course, so don't bother
* counting that again for the quota updates. */
#define EXT4_DATA_TRANS_BLOCKS(sb) (EXT4_SINGLEDATA_TRANS_BLOCKS(sb) + \
EXT4_XATTR_TRANS_BLOCKS - 2 + \
EXT4_MAXQUOTAS_TRANS_BLOCKS(sb))
/*
* Define the number of metadata blocks we need to account to modify data.
*
* This include super block, inode block, quota blocks and xattr blocks
*/
#define EXT4_META_TRANS_BLOCKS(sb) (EXT4_XATTR_TRANS_BLOCKS + \
EXT4_MAXQUOTAS_TRANS_BLOCKS(sb))
/* Define an arbitrary limit for the amount of data we will anticipate
* writing to any given transaction. For unbounded transactions such as
* write(2) and truncate(2) we can write more than this, but we always
* start off at the maximum transaction size and grow the transaction
* optimistically as we go. */
#define EXT4_MAX_TRANS_DATA 64U
/* We break up a large truncate or write transaction once the handle's
* buffer credits gets this low, we need either to extend the
* transaction or to start a new one. Reserve enough space here for
* inode, bitmap, superblock, group and indirection updates for at least
* one block, plus two quota updates. Quota allocations are not
* needed. */
#define EXT4_RESERVE_TRANS_BLOCKS 12U
/*
* Number of credits needed if we need to insert an entry into a
* directory. For each new index block, we need 4 blocks (old index
* block, new index block, bitmap block, bg summary). For normal
* htree directories there are 2 levels; if the largedir feature
* enabled it's 3 levels.
*/
#define EXT4_INDEX_EXTRA_TRANS_BLOCKS 12U
#ifdef CONFIG_QUOTA
/* Amount of blocks needed for quota update - we know that the structure was
* allocated so we need to update only data block */
#define EXT4_QUOTA_TRANS_BLOCKS(sb) ((ext4_quota_capable(sb)) ? 1 : 0)
/* Amount of blocks needed for quota insert/delete - we do some block writes
* but inode, sb and group updates are done only once */
#define EXT4_QUOTA_INIT_BLOCKS(sb) ((ext4_quota_capable(sb)) ?\
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
(DQUOT_INIT_ALLOC*(EXT4_SINGLEDATA_TRANS_BLOCKS(sb)-3)\
+3+DQUOT_INIT_REWRITE) : 0)
#define EXT4_QUOTA_DEL_BLOCKS(sb) ((ext4_quota_capable(sb)) ?\
ext4: make quota as first class supported feature This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-23 00:21:31 +00:00
(DQUOT_DEL_ALLOC*(EXT4_SINGLEDATA_TRANS_BLOCKS(sb)-3)\
+3+DQUOT_DEL_REWRITE) : 0)
#else
#define EXT4_QUOTA_TRANS_BLOCKS(sb) 0
#define EXT4_QUOTA_INIT_BLOCKS(sb) 0
#define EXT4_QUOTA_DEL_BLOCKS(sb) 0
#endif
#define EXT4_MAXQUOTAS_TRANS_BLOCKS(sb) (EXT4_MAXQUOTAS*EXT4_QUOTA_TRANS_BLOCKS(sb))
#define EXT4_MAXQUOTAS_INIT_BLOCKS(sb) (EXT4_MAXQUOTAS*EXT4_QUOTA_INIT_BLOCKS(sb))
#define EXT4_MAXQUOTAS_DEL_BLOCKS(sb) (EXT4_MAXQUOTAS*EXT4_QUOTA_DEL_BLOCKS(sb))
/*
* Ext4 handle operation types -- for logging purposes
*/
#define EXT4_HT_MISC 0
#define EXT4_HT_INODE 1
#define EXT4_HT_WRITE_PAGE 2
#define EXT4_HT_MAP_BLOCKS 3
#define EXT4_HT_DIR 4
#define EXT4_HT_TRUNCATE 5
#define EXT4_HT_QUOTA 6
#define EXT4_HT_RESIZE 7
#define EXT4_HT_MIGRATE 8
#define EXT4_HT_MOVE_EXTENTS 9
#define EXT4_HT_XATTR 10
#define EXT4_HT_EXT_CONVERT 11
#define EXT4_HT_MAX 12
/**
* struct ext4_journal_cb_entry - Base structure for callback information.
*
* This struct is a 'seed' structure for a using with your own callback
* structs. If you are using callbacks you must allocate one of these
* or another struct of your own definition which has this struct
* as it's first element and pass it to ext4_journal_callback_add().
*/
struct ext4_journal_cb_entry {
/* list information for other callbacks attached to the same handle */
struct list_head jce_list;
/* Function to call with this callback structure */
void (*jce_func)(struct super_block *sb,
struct ext4_journal_cb_entry *jce, int error);
/* user data goes here */
};
/**
* ext4_journal_callback_add: add a function to call after transaction commit
* @handle: active journal transaction handle to register callback on
* @func: callback function to call after the transaction has committed:
* @sb: superblock of current filesystem for transaction
* @jce: returned journal callback data
* @rc: journal state at commit (0 = transaction committed properly)
* @jce: journal callback data (internal and function private data struct)
*
* The registered function will be called in the context of the journal thread
* after the transaction for which the handle was created has completed.
*
* No locks are held when the callback function is called, so it is safe to
* call blocking functions from within the callback, but the callback should
* not block or run for too long, or the filesystem will be blocked waiting for
* the next transaction to commit. No journaling functions can be used, or
* there is a risk of deadlock.
*
* There is no guaranteed calling order of multiple registered callbacks on
* the same transaction.
*/
static inline void _ext4_journal_callback_add(handle_t *handle,
struct ext4_journal_cb_entry *jce)
{
/* Add the jce to transaction's private list */
list_add_tail(&jce->jce_list, &handle->h_transaction->t_private_list);
}
static inline void ext4_journal_callback_add(handle_t *handle,
void (*func)(struct super_block *sb,
struct ext4_journal_cb_entry *jce,
int rc),
struct ext4_journal_cb_entry *jce)
{
struct ext4_sb_info *sbi =
EXT4_SB(handle->h_transaction->t_journal->j_private);
/* Add the jce to transaction's private list */
jce->jce_func = func;
spin_lock(&sbi->s_md_lock);
_ext4_journal_callback_add(handle, jce);
spin_unlock(&sbi->s_md_lock);
}
/**
* ext4_journal_callback_del: delete a registered callback
* @handle: active journal transaction handle on which callback was registered
* @jce: registered journal callback entry to unregister
* Return true if object was successfully removed
*/
ext4: fix journal callback list traversal It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.com
2013-04-04 02:08:52 +00:00
static inline bool ext4_journal_callback_try_del(handle_t *handle,
struct ext4_journal_cb_entry *jce)
{
ext4: fix journal callback list traversal It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.com
2013-04-04 02:08:52 +00:00
bool deleted;
struct ext4_sb_info *sbi =
EXT4_SB(handle->h_transaction->t_journal->j_private);
spin_lock(&sbi->s_md_lock);
ext4: fix journal callback list traversal It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.com
2013-04-04 02:08:52 +00:00
deleted = !list_empty(&jce->jce_list);
list_del_init(&jce->jce_list);
spin_unlock(&sbi->s_md_lock);
ext4: fix journal callback list traversal It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.com
2013-04-04 02:08:52 +00:00
return deleted;
}
int
ext4_mark_iloc_dirty(handle_t *handle,
struct inode *inode,
struct ext4_iloc *iloc);
/*
* On success, We end up with an outstanding reference count against
* iloc->bh. This _must_ be cleaned up later.
*/
int ext4_reserve_inode_write(handle_t *handle, struct inode *inode,
struct ext4_iloc *iloc);
#define ext4_mark_inode_dirty(__h, __i) \
__ext4_mark_inode_dirty((__h), (__i), __func__, __LINE__)
int __ext4_mark_inode_dirty(handle_t *handle, struct inode *inode,
const char *func, unsigned int line);
int ext4_expand_extra_isize(struct inode *inode,
unsigned int new_extra_isize,
struct ext4_iloc *iloc);
/*
* Wrapper functions with which ext4 calls into JBD.
*/
int __ext4_journal_get_write_access(const char *where, unsigned int line,
handle_t *handle, struct super_block *sb,
struct buffer_head *bh,
enum ext4_journal_trigger_type trigger_type);
int __ext4_forget(const char *where, unsigned int line, handle_t *handle,
int is_metadata, struct inode *inode,
struct buffer_head *bh, ext4_fsblk_t blocknr);
int __ext4_journal_get_create_access(const char *where, unsigned int line,
handle_t *handle, struct super_block *sb,
struct buffer_head *bh,
enum ext4_journal_trigger_type trigger_type);
int __ext4_handle_dirty_metadata(const char *where, unsigned int line,
handle_t *handle, struct inode *inode,
struct buffer_head *bh);
#define ext4_journal_get_write_access(handle, sb, bh, trigger_type) \
__ext4_journal_get_write_access(__func__, __LINE__, (handle), (sb), \
(bh), (trigger_type))
#define ext4_forget(handle, is_metadata, inode, bh, block_nr) \
__ext4_forget(__func__, __LINE__, (handle), (is_metadata), (inode), \
(bh), (block_nr))
#define ext4_journal_get_create_access(handle, sb, bh, trigger_type) \
__ext4_journal_get_create_access(__func__, __LINE__, (handle), (sb), \
(bh), (trigger_type))
#define ext4_handle_dirty_metadata(handle, inode, bh) \
__ext4_handle_dirty_metadata(__func__, __LINE__, (handle), (inode), \
(bh))
handle_t *__ext4_journal_start_sb(struct super_block *sb, unsigned int line,
int type, int blocks, int rsv_blocks,
int revoke_creds);
int __ext4_journal_stop(const char *where, unsigned int line, handle_t *handle);
#define EXT4_NOJOURNAL_MAX_REF_COUNT ((unsigned long) 4096)
/* Note: Do not use this for NULL handles. This is only to determine if
* a properly allocated handle is using a journal or not. */
static inline int ext4_handle_valid(handle_t *handle)
{
if ((unsigned long)handle < EXT4_NOJOURNAL_MAX_REF_COUNT)
return 0;
return 1;
}
static inline void ext4_handle_sync(handle_t *handle)
{
if (ext4_handle_valid(handle))
handle->h_sync = 1;
}
static inline int ext4_handle_is_aborted(handle_t *handle)
{
if (ext4_handle_valid(handle))
return is_handle_aborted(handle);
return 0;
}
static inline int ext4_free_metadata_revoke_credits(struct super_block *sb,
int blocks)
{
/* Freeing each metadata block can result in freeing one cluster */
return blocks * EXT4_SB(sb)->s_cluster_ratio;
}
static inline int ext4_trans_default_revoke_credits(struct super_block *sb)
{
return ext4_free_metadata_revoke_credits(sb, 8);
}
#define ext4_journal_start_sb(sb, type, nblocks) \
__ext4_journal_start_sb((sb), __LINE__, (type), (nblocks), 0, \
ext4_trans_default_revoke_credits(sb))
#define ext4_journal_start(inode, type, nblocks) \
__ext4_journal_start((inode), __LINE__, (type), (nblocks), 0, \
ext4_trans_default_revoke_credits((inode)->i_sb))
#define ext4_journal_start_with_reserve(inode, type, blocks, rsv_blocks)\
__ext4_journal_start((inode), __LINE__, (type), (blocks), (rsv_blocks),\
ext4_trans_default_revoke_credits((inode)->i_sb))
#define ext4_journal_start_with_revoke(inode, type, blocks, revoke_creds) \
__ext4_journal_start((inode), __LINE__, (type), (blocks), 0, \
(revoke_creds))
static inline handle_t *__ext4_journal_start(struct inode *inode,
unsigned int line, int type,
int blocks, int rsv_blocks,
int revoke_creds)
{
return __ext4_journal_start_sb(inode->i_sb, line, type, blocks,
rsv_blocks, revoke_creds);
}
#define ext4_journal_stop(handle) \
__ext4_journal_stop(__func__, __LINE__, (handle))
#define ext4_journal_start_reserved(handle, type) \
__ext4_journal_start_reserved((handle), __LINE__, (type))
handle_t *__ext4_journal_start_reserved(handle_t *handle, unsigned int line,
int type);
static inline handle_t *ext4_journal_current_handle(void)
{
return journal_current_handle();
}
static inline int ext4_journal_extend(handle_t *handle, int nblocks, int revoke)
{
if (ext4_handle_valid(handle))
return jbd2_journal_extend(handle, nblocks, revoke);
return 0;
}
static inline int ext4_journal_restart(handle_t *handle, int nblocks,
int revoke)
{
if (ext4_handle_valid(handle))
return jbd2__journal_restart(handle, nblocks, revoke, GFP_NOFS);
return 0;
}
int __ext4_journal_ensure_credits(handle_t *handle, int check_cred,
int extend_cred, int revoke_cred);
/*
* Ensure @handle has at least @check_creds credits available. If not,
* transaction will be extended or restarted to contain at least @extend_cred
* credits. Before restarting transaction @fn is executed to allow for cleanup
* before the transaction is restarted.
*
* The return value is < 0 in case of error, 0 in case the handle has enough
* credits or transaction extension succeeded, 1 in case transaction had to be
* restarted.
*/
#define ext4_journal_ensure_credits_fn(handle, check_cred, extend_cred, \
revoke_cred, fn) \
({ \
__label__ __ensure_end; \
int err = __ext4_journal_ensure_credits((handle), (check_cred), \
(extend_cred), (revoke_cred)); \
\
if (err <= 0) \
goto __ensure_end; \
err = (fn); \
if (err < 0) \
goto __ensure_end; \
err = ext4_journal_restart((handle), (extend_cred), (revoke_cred)); \
if (err == 0) \
err = 1; \
__ensure_end: \
err; \
})
/*
* Ensure given handle has at least requested amount of credits available,
* possibly restarting transaction if needed. We also make sure the transaction
* has space for at least ext4_trans_default_revoke_credits(sb) revoke records
* as freeing one or two blocks is very common pattern and requesting this is
* very cheap.
*/
static inline int ext4_journal_ensure_credits(handle_t *handle, int credits,
int revoke_creds)
{
return ext4_journal_ensure_credits_fn(handle, credits, credits,
revoke_creds, 0);
}
static inline int ext4_journal_blocks_per_page(struct inode *inode)
{
if (EXT4_JOURNAL(inode) != NULL)
return jbd2_journal_blocks_per_page(inode);
return 0;
}
static inline int ext4_journal_force_commit(journal_t *journal)
{
if (journal)
return jbd2_journal_force_commit(journal);
return 0;
}
static inline int ext4_jbd2_inode_add_write(handle_t *handle,
struct inode *inode, loff_t start_byte, loff_t length)
{
if (ext4_handle_valid(handle))
return jbd2_journal_inode_ranged_write(handle,
EXT4_I(inode)->jinode, start_byte, length);
return 0;
}
static inline int ext4_jbd2_inode_add_wait(handle_t *handle,
struct inode *inode, loff_t start_byte, loff_t length)
{
if (ext4_handle_valid(handle))
return jbd2_journal_inode_ranged_wait(handle,
EXT4_I(inode)->jinode, start_byte, length);
return 0;
}
static inline void ext4_update_inode_fsync_trans(handle_t *handle,
struct inode *inode,
int datasync)
{
struct ext4_inode_info *ei = EXT4_I(inode);
if (ext4_handle_valid(handle) && !is_handle_aborted(handle)) {
ei->i_sync_tid = handle->h_transaction->t_tid;
if (datasync)
ei->i_datasync_tid = handle->h_transaction->t_tid;
}
}
/* super.c */
int ext4_force_commit(struct super_block *sb);
ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc Ext4 does not support data journalling with delayed allocation enabled. We even do not allow to mount the file system with delayed allocation and data journalling enabled, however it can be set via FS_IOC_SETFLAGS so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file system mounted with delayed allocation (default) and that's where problem arises. The easies way to reproduce this problem is with the following set of commands: mkfs.ext4 /dev/sdd mount /dev/sdd /mnt/test1 dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 chattr +j /mnt/test1/file dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc chattr -j /mnt/test1/file Additionally it can be reproduced quite reliably with xfstests 272 and 269. In fact the above reproducer is a part of test 272. To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if the file system is mounted with delayed allocation. This can be easily done by fixing ext4_should_*_data() functions do ignore data journal flag when delalloc is set (suggested by Ted). We also have to set the appropriate address space operations for the inode (again, ignoring data journal flag if delalloc enabled). Additionally this commit introduces ext4_inode_journal_mode() function because ext4_should_*_data() has already had a lot of common code and this change is putting it all into one function so it is easier to read. Successfully tested with xfstests in following configurations: delalloc + data=ordered delalloc + data=writeback data=journal nodelalloc + data=ordered nodelalloc + data=writeback nodelalloc + data=journal Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-02-20 22:53:00 +00:00
/*
* Ext4 inode journal modes
*/
#define EXT4_INODE_JOURNAL_DATA_MODE 0x01 /* journal data mode */
#define EXT4_INODE_ORDERED_DATA_MODE 0x02 /* ordered data mode */
#define EXT4_INODE_WRITEBACK_DATA_MODE 0x04 /* writeback data mode */
int ext4_inode_journal_mode(struct inode *inode);
ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc Ext4 does not support data journalling with delayed allocation enabled. We even do not allow to mount the file system with delayed allocation and data journalling enabled, however it can be set via FS_IOC_SETFLAGS so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file system mounted with delayed allocation (default) and that's where problem arises. The easies way to reproduce this problem is with the following set of commands: mkfs.ext4 /dev/sdd mount /dev/sdd /mnt/test1 dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 chattr +j /mnt/test1/file dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc chattr -j /mnt/test1/file Additionally it can be reproduced quite reliably with xfstests 272 and 269. In fact the above reproducer is a part of test 272. To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if the file system is mounted with delayed allocation. This can be easily done by fixing ext4_should_*_data() functions do ignore data journal flag when delalloc is set (suggested by Ted). We also have to set the appropriate address space operations for the inode (again, ignoring data journal flag if delalloc enabled). Additionally this commit introduces ext4_inode_journal_mode() function because ext4_should_*_data() has already had a lot of common code and this change is putting it all into one function so it is easier to read. Successfully tested with xfstests in following configurations: delalloc + data=ordered delalloc + data=writeback data=journal nodelalloc + data=ordered nodelalloc + data=writeback nodelalloc + data=journal Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-02-20 22:53:00 +00:00
static inline int ext4_should_journal_data(struct inode *inode)
{
return ext4_inode_journal_mode(inode) & EXT4_INODE_JOURNAL_DATA_MODE;
}
static inline int ext4_should_order_data(struct inode *inode)
{
ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc Ext4 does not support data journalling with delayed allocation enabled. We even do not allow to mount the file system with delayed allocation and data journalling enabled, however it can be set via FS_IOC_SETFLAGS so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file system mounted with delayed allocation (default) and that's where problem arises. The easies way to reproduce this problem is with the following set of commands: mkfs.ext4 /dev/sdd mount /dev/sdd /mnt/test1 dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 chattr +j /mnt/test1/file dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc chattr -j /mnt/test1/file Additionally it can be reproduced quite reliably with xfstests 272 and 269. In fact the above reproducer is a part of test 272. To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if the file system is mounted with delayed allocation. This can be easily done by fixing ext4_should_*_data() functions do ignore data journal flag when delalloc is set (suggested by Ted). We also have to set the appropriate address space operations for the inode (again, ignoring data journal flag if delalloc enabled). Additionally this commit introduces ext4_inode_journal_mode() function because ext4_should_*_data() has already had a lot of common code and this change is putting it all into one function so it is easier to read. Successfully tested with xfstests in following configurations: delalloc + data=ordered delalloc + data=writeback data=journal nodelalloc + data=ordered nodelalloc + data=writeback nodelalloc + data=journal Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-02-20 22:53:00 +00:00
return ext4_inode_journal_mode(inode) & EXT4_INODE_ORDERED_DATA_MODE;
}
static inline int ext4_should_writeback_data(struct inode *inode)
{
ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc Ext4 does not support data journalling with delayed allocation enabled. We even do not allow to mount the file system with delayed allocation and data journalling enabled, however it can be set via FS_IOC_SETFLAGS so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file system mounted with delayed allocation (default) and that's where problem arises. The easies way to reproduce this problem is with the following set of commands: mkfs.ext4 /dev/sdd mount /dev/sdd /mnt/test1 dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 chattr +j /mnt/test1/file dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc chattr -j /mnt/test1/file Additionally it can be reproduced quite reliably with xfstests 272 and 269. In fact the above reproducer is a part of test 272. To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if the file system is mounted with delayed allocation. This can be easily done by fixing ext4_should_*_data() functions do ignore data journal flag when delalloc is set (suggested by Ted). We also have to set the appropriate address space operations for the inode (again, ignoring data journal flag if delalloc enabled). Additionally this commit introduces ext4_inode_journal_mode() function because ext4_should_*_data() has already had a lot of common code and this change is putting it all into one function so it is easier to read. Successfully tested with xfstests in following configurations: delalloc + data=ordered delalloc + data=writeback data=journal nodelalloc + data=ordered nodelalloc + data=writeback nodelalloc + data=journal Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-02-20 22:53:00 +00:00
return ext4_inode_journal_mode(inode) & EXT4_INODE_WRITEBACK_DATA_MODE;
}
static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks)
{
if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
return 0;
if (!ext4_should_journal_data(inode))
return 0;
/*
* Data blocks in one extent are contiguous, just account for partial
* clusters at extent boundaries
*/
return blocks + 2*(EXT4_SB(inode->i_sb)->s_cluster_ratio - 1);
}
/*
* This function controls whether or not we should try to go down the
* dioread_nolock code paths, which makes it safe to avoid taking
* i_rwsem for direct I/O reads. This only works for extent-based
* files, and it doesn't work if data journaling is enabled, since the
* dioread_nolock code uses b_private to pass information back to the
* I/O completion handler, and this conflicts with the jbd's use of
* b_private.
*/
static inline int ext4_should_dioread_nolock(struct inode *inode)
{
if (!test_opt(inode->i_sb, DIOREAD_NOLOCK))
return 0;
if (!S_ISREG(inode->i_mode))
return 0;
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
return 0;
if (ext4_should_journal_data(inode))
return 0;
ext4: disable dioread_nolock whenever delayed allocation is disabled The patch "ext4: make dioread_nolock the default" (244adf6426ee) causes generic/422 to fail when run in kvm-xfstests' ext3conv test case. This applies both the dioread_nolock and nodelalloc mount options, a combination not previously tested by kvm-xfstests. The failure occurs because the dioread_nolock code path splits a previously fallocated multiblock extent into a series of single block extents when overwriting a portion of that extent. That causes allocation of an extent tree leaf node and a reshuffling of extents. Once writeback is completed, the individual extents are recombined into a single extent, the extent is moved again, and the leaf node is deleted. The difference in block utilization before and after writeback due to the leaf node triggers the failure. The original reason for this behavior was to avoid ENOSPC when handling I/O completions during writeback in the dioread_nolock code paths when delayed allocation is disabled. It may no longer be necessary, because code was added in the past to reserve extra space to solve this problem when delayed allocation is enabled, and this code may also apply when delayed allocation is disabled. Until this can be verified, don't use the dioread_nolock code paths if delayed allocation is disabled. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20200319150028.24592-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-19 15:00:28 +00:00
/* temporary fix to prevent generic/422 test failures */
if (!test_opt(inode->i_sb, DELALLOC))
return 0;
return 1;
}
#endif /* _EXT4_JBD2_H */